Direct Payment Integrator V6 - Online Help
Direct Payment Integrator V6
Questions / Feedback?

PTechDebit Component

Properties   Methods   Events   Configuration Settings   Errors  

The PTECHDEBIT component is used to complete debit card transactions with the Paymentech NetConnect system on the Tampa platform. This component supports only Retail, Restaurant, and Hotel environments, and allows for simple, direct, secure communication to the Paymentech TLS/SSL gateway through a standard Internet connection. This component can be integrated into Point Of Sale applications. Because all TLS/SSL communications are handled inside the component, any application can be deployed without the need for expensive dedicated TLS/SSL servers.

Syntax

nsoftware.InPayDirect.Ptechdebit

Remarks

The PTechDebit component contains a subset of the PTechCharge component's functionality. It only authorizes debit card transactions for the Retail, Restaurant, and Hotel IndustryTypes. This component provides a much simpler interface for processing debit cards (and only debit cards), but otherwise works much like the PTechCharge component.

First, set the MerchantNumber, TerminalNumber, ClientNumber, UserId, and Password with the information given to you when you signed up for Paymentech service. You should also set your IndustryType and PINCapability at this time. (PINCapability must be set to ppAcceptsPIN or ppVerifiedPIN, as a PIN pad is required for Debit card transactions).

Next, set the CardMagneticStripe property with Track 2 data read off the card. PIN-based Debit card transactions cannot be manually entered, and are always card-present transactions. Sending Track 1 data in the CardMagneticStripe property will result in a failed. You must also set the DebitKSN and DebitPIN retrieved from the PIN pad after the customer enters his PIN.

Finally, set the TransactionAmount and, and if applicable any DebitCashBack amount. Then call Sale to send the transaction to the Paymentech Server for processing.

The result of the authorization request will be stored in the Response property. The Code field will contain the status of the request and the Text field will contain the human-readable response message. The contents of the Response should be logged after a successful transaction.

Debit card transactions are instant funds transfers. There is no block placed on the debit card, funds are immediately removed and sent to the merchant. Therefore, only the Host Capture settlement mode is supported. At the end of the day you should release the current batch using the PTechHostSettle component (the batch may contain other authorizations that were made using different components from this product. See the documentation for the other components you are using for more information).

Property List


The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

CardMagneticStripeTrack 2 data read off of the card's magnetic stripe.
ClientNumberMerchant configuration property, assigned by Paymentech.
DebitCashBackOptional cash back amount for debit transactions.
DebitKSNClear-text Key Sequence Number, used for Debit transactions.
DebitPINDUKPT DES encrypted PIN block, used for Debit transactions.
DuplicateCheckingIndicates whether duplicate checking is enabled.
IndustryTypeDetermines the merchant's industry type.
InvoiceNumberMerchant-generated invoice number.
MerchantNumberA unique number used to identify the merchant, assigned by Paymentech.
PasswordPassword for authentication with the NetConnect Server .
ProxyA set of properties related to proxy access.
ResponseContains the response to an authorization.
SequenceNumberSequence number of the transaction.
ServerThe URL for the PaymenTech NetConnect server.
SSLAcceptServerCertInstructs the component to unconditionally accept the server certificate that matches the supplied certificate.
SSLCertThe certificate to be used during SSL negotiation.
SSLServerCertThe server certificate for the last established connection.
TerminalNumberTerminal number assigned by Paymentech.
TimeoutA timeout for the component.
TransactionAmountPurchase amount for an authorization.
UserIdUserId for authentication with the NetConnect Server .

Method List


The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

ConfigSets or retrieves a configuration setting .
CreditCredits a cardholder's account.
InterruptInterrupt the current method.
ResetClears all properties to their default values.
SaleSends a Sale transaction to the host.

Event List


The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

DataPacketInFired when receiving a data packet from the transaction server.
DataPacketOutFired when sending a data packet to the transaction server.
ErrorInformation about errors during data delivery.
SSLServerAuthenticationFired after the server presents its certificate to the client.
SSLStatusShows the progress of the secure connection.

Configuration Settings


The following is a list of configuration settings for the component with short descriptions. Click on the links for further details.

CustomerDefinedDataAdditional transaction identification data.
SystemInformationSystem Information field for Batch Inquiry and Release transactions.
SettlementModeIndicates whether the component uses Paymentech's Host Capture or Terminal Capture system.
ResponsePOSRetrievalNumberPOS Retrieval Number sent in the request, echoed back in the response.
EMVDataThe EMV data returned from a Pin Pad after reading an EMV card.
EMVEntryDataSourceThe EMV Data Entry Source (DES).
ResponseEMVDataThe response EMV data.
ResponseEMVCardAuthCodeThe ChaseNet and Visa card authentication results code.
ResponseEMVDownloadIndicatorWhether EMV parameters should be updated.
AcceptEncodingUsed to tell the server which types of content encodings the client supports.
AllowHTTPCompressionThis property enables HTTP compression for receiving data.
AllowIdenticalRedirectURLAllow redirects to the same URL.
AppendWhether to append data to LocalFile.
AuthorizationThe Authorization string to be sent to the server.
BytesTransferredContains the number of bytes transferred in the response data.
EncodeURLIf set to true the URL will be encoded by the component.
FollowRedirectsDetermines what happens when the server issues a redirect.
GetOn302RedirectIf set to true the component will perform a GET on the new location.
HTTPVersionThe version of HTTP used by the component.
IfModifiedSinceA date determining the maximum age of the desired document.
KeepAliveDetermines whether the HTTP connection is closed after completion of the request.
MaxRedirectAttemptsLimits the number of redirects that are followed in a request.
OtherHeadersOther headers as determined by the user (optional).
ProxyAuthorizationThe authorization string to be sent to the proxy server.
ProxyAuthSchemeThe authorization scheme to be used for the proxy.
ProxyPasswordA password if authentication is to be used for the proxy.
ProxyPortPort for the proxy server (default 80).
ProxyServerName or IP address of a proxy server (optional).
ProxyUserA user name if authentication is to be used for the proxy.
TransferredDataLimitThe maximum number of incoming bytes to be stored by the component.
TransferredHeadersThe full set of headers as received from the server.
UseChunkedEncodingEnables or Disables HTTP chunked encoding for transfers.
ChunkSizeSpecifies the chunk size in bytes when using chunked encoding.
UserAgentInformation about the user agent (browser).
KerberosSPNThe Service Principal Name for the Kerberos Domain Controller.
ConnectionTimeoutSets a separate timeout value for establishing a connection.
FirewallAutoDetectTells the component whether or not to automatically detect and use firewall system settings, if available.
FirewallHostName or IP address of firewall (optional).
FirewallPasswordPassword to be used if authentication is to be used when connecting through the firewall.
FirewallPortThe TCP port for the FirewallHost;.
FirewallTypeDetermines the type of firewall to connect through.
FirewallUserA user name if authentication is to be used connecting through a firewall.
KeepAliveTimeThe inactivity time in milliseconds before a TCP keep-alive packet is sent.
KeepAliveIntervalThe retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
LingerWhen set to True, connections are terminated gracefully.
LingerTimeTime in seconds to have the connection linger.
LocalHostThe name of the local host through which connections are initiated or accepted.
LocalPortThe TCP port in the local host where the component binds.
MaxLineLengthThe maximum amount of data to accumulate when no EOL is found.
MaxTransferRateThe transfer rate limit in bytes per second.
RecordLengthThe length of received data records.
TCPKeepAliveDetermines whether or not the keep alive socket option is enabled.
UseIPv6Whether to use IPv6.
TcpNoDelayWhether or not to delay when sending packets.
TLS12SignatureAlgorithmsDefines the allowed TLS 1.2 signature algorithms when UseManagedSecurityAPI is True.
ReuseSSLSessionDetermines if the SSL session is reused.
SSLCipherStrengthThe minimum cipher strength used for bulk encryption.
SSLEnabledProtocolsUsed to enable/disable the supported security protocols.
SSLProviderThe name of the security provider to use.
SSLSecurityFlagsFlags that control certificate verification.
OpenSSLCADirThe path to a directory containing CA certificates.
OpenSSLCAFileName of the file containing the list of CA's trusted by your application.
OpenSSLCipherListA string that controls the ciphers to be used by SSL.
OpenSSLPrngSeedDataThe data to seed the pseudo random number generator (PRNG).
AbsoluteTimeoutDetermines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallDataUsed to send extra data to the firewall.
InBufferSizeThe size in bytes of the incoming queue of the socket.
OutBufferSizeThe size in bytes of the outgoing queue of the socket.
CodePageThe system code page used for Unicode to Multibyte translations.

 
 
Copyright (c) 2017 /n software inc. - All rights reserved.
Build 6.0.6240.0