AS2 Configuration

If AcceptAnySignerCert is set to true, the adapter will accept any signer certificate for the incoming signature. Use of this setting in production is discouraged, as failing to authenticate the sender poses a security risk.

This setting specifies whether to log debug data. When set to True the adapter will create additional files in the LogDirectory. The default value is False.

When sending, files with extensions ".input", ".sign", ".compress", and ".encrypt" may be created. When receiving, files with extensions ".input", ".verify", ".decompress", and ".decrypt" may be created.

The default mode of operation is for the receipt to be returned synchronously within the HTTP reply. By specifying a valid URL, the user may request asynchronous delivery instead. The URL indicates the destination for the reply, and may use any appropriate protocol, such as "mailto", "http", or "https".

If this is set to an empty string (default), the receipt will be returned synchronously, and will be processed automatically by the adapter. Clients requesting asynchronous delivery should provide their own processing for reading receipts. This is applicable to the send adapter only.

The Signature Algorithm can be set to indicate the preferred signing algorithm. Possible values are:

• sha1
• md5
• sha-224
• sha-256 (default)
• sha-384
• sha-512

 signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha-256
 

If an asynchronous MDN is requested to be sent over SMTP this specifies the sender. This is applicable to the receive adapter only.

If an asynchronous MDN is requested to be sent over SMTP this specifies the server. This is applicable to the receive adapter only.

If an asynchronous MDN is requested to be sent over SMTP this specifies the subject. This is applicable to the receive adapter only.

When sending, this setting controls whether data is chunked. Chunking allows data to be streamed as it is available instead of preparing the entire message first. It is recommended to set this to True if sending very large files. The default value is False.

If set to true, OAEP will be used when encrypting the key. By default this value is False and the component will use PKCS1. Only applicable when sending AS2 messages. The following optional settings apply when this is set to True:

• OAEPParams
• OAEPMGF1HashAlgorithm
• OAEPRSAHashAlgorithm

When UseOAEP is True, this algorithm specifies the MGF1 hash algorithm used for the encryption key by RSA OAEP. Possible values are:

• "SHA1"
• "SHA224"
• "SHA256" (default)
• "SHA384"
• "SHA512"

Note: An empty string value indicates that the algorithm specified by OAEPRSAHashAlgorithm is used as the RSA hash algorithm as well.

When UseOAEP is True, this algorithm specifies the RSA hash algorithm used for the encryption key. This may differ from the hash algorithm used to sign the AS4 message content. Possible values are:

• "SHA1"
• "SHA224"
• "SHA256" (default)
• "SHA384"
• "SHA512"

This setting is optional and should only be specified if OAEP parameters need to be explicitly set. The value specified should be a hex string. By default this setting is unspecified.

If set to true, RSA-PSS will be used when signing messages. The default value is False. Note that the certificate used to sign does not itself need to be signed with RSA-PSS; any valid RSA certificate may be used with this setting.

If set to true, the adapter will reuse the context if and only if the following criteria are met:

• The target host name is the same.
• The system cache entry has not expired (default timeout is 10 hours).
• The application process that calls the function is the same.
• The logon session is the same.
• The instance of the adapter is the same.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:

Note: TLS 1.1 and TLS1.2 support are only available starting with Windows 7.

Note: Enabling TLS 1.3 will automatically set UseInternalSecurityAPI to True.

This setting specifies whether the transport log contains the full certificate chain. By default this value is False and only the leaf certificate will be present.

If set to True all certificates returned by the server will be present in the transport log. This includes the leaf certificate, any intermediate certificate, and the root certificate.

Note: When UseInternalSecurityAPI is set to True this value is automatically set to True. This is needed for proper validation when using the internal provider.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the adapter will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when UseInternalSecurityAPI is False (default):

// The "Other" property could contain ONE of the following lines:
SSLEnabledCipherSuites=*
SSLEnabledCipherSuites=CALG_AES_256
SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES

• CALG_3DES
• CALG_3DES_112
• CALG_AES
• CALG_AES_128
• CALG_AES_192
• CALG_AES_256
• CALG_AGREEDKEY_ANY
• CALG_CYLINK_MEK
• CALG_DES
• CALG_DESX
• CALG_DH_EPHEM
• CALG_DH_SF
• CALG_DSS_SIGN
• CALG_ECDH
• CALG_ECDH_EPHEM
• CALG_ECDSA
• CALG_ECMQV
• CALG_HASH_REPLACE_OWF
• CALG_HUGHES_MD5
• CALG_HMAC
• CALG_KEA_KEYX
• CALG_MAC
• CALG_MD2
• CALG_MD4
• CALG_MD5
• CALG_NO_SIGN
• CALG_OID_INFO_CNG_ONLY
• CALG_OID_INFO_PARAMETERS
• CALG_PCT1_MASTER
• CALG_RC2
• CALG_RC4
• CALG_RC5
• CALG_RSA_KEYX
• CALG_RSA_SIGN
• CALG_SCHANNEL_ENC_KEY
• CALG_SCHANNEL_MAC_KEY
• CALG_SCHANNEL_MASTER_HASH
• CALG_SEAL
• CALG_SHA
• CALG_SHA1
• CALG_SHA_256
• CALG_SHA_384
• CALG_SHA_512
• CALG_SKIPJACK
• CALG_SSL2_MASTER
• CALG_SSL3_MASTER
• CALG_SSL3_SHAMD5
• CALG_TEK
• CALG_TLS1_MASTER
• CALG_TLS1PRF

// The "Other" property could contain ONE of the following lines:
SSLEnabledCipherSuites=*
SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA
SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_DH_ANON_WITH_AES_128_CBC_SHA

• TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
• TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
• TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
• TLS_DHE_DSS_WITH_AES_128_CBC_SHA
• TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
• TLS_DHE_DSS_WITH_AES_256_CBC_SHA
• TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
• TLS_DHE_DSS_WITH_DES_CBC_SHA
• TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
• TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
• TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
• TLS_DHE_RSA_WITH_AES_128_CBC_SHA
• TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
• TLS_DHE_RSA_WITH_AES_256_CBC_SHA
• TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
• TLS_DHE_RSA_WITH_DES_CBC_SHA
• TLS_RSA_WITH_AES_256_GCM_SHA384
• TLS_RSA_WITH_AES_128_GCM_SHA256
• TLS_RSA_WITH_3DES_EDE_CBC_SHA
• TLS_RSA_WITH_AES_128_CBC_SHA
• TLS_RSA_WITH_AES_128_CBC_SHA256
• TLS_RSA_WITH_AES_256_CBC_SHA
• TLS_RSA_WITH_AES_256_CBC_SHA256
• TLS_RSA_WITH_DES_CBC_SHA
• TLS_RSA_WITH_RC4_128_MD5
• TLS_RSA_WITH_RC4_128_SHA

If SSLEnabledProtocols is configured to use TLS 1.3 the following values are supported:

• TLS_AES_128_GCM_SHA256
• TLS_AES_256_GCM_SHA384

SSLEnabledCipherSuites is used together with SSLCipherStrength.

This setting specifies the allowed server certificate signature algorithms when UseInternalSecurityAPI is True and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the adapter will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the adapter will fail with an error.

The format of this value is a comma separated list of hash-signature combinations. For instance:

// The "Other" could contain ALL of these lines:
UseInternalSecurityAPI=true
SSLEnabledProtocols=3072
TLS12SignatureAlgorithms=sha1-rsa,sha1-dsa,sha256-rsa,sha256-dsa

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

This setting specifies a comma separated list of (EC)DHE groups that are supported for key exchange. The values are ordered from most preferred to least preferred. The following values are supported:

• "ecdhe_secp256r1" (default)
• "ecdhe_secp384r1" (default)
• "ecdhe_secp521r1"
• "ffdhe_2048" (default)
• "ffdhe_3072" (default)
• "ffdhe_4096"
• "ffdhe_6144"
• "ffdhe_8192"

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072. This setting is only applicable when SSLEnabledProtocols includes TLS 1.3. Note that groups of larger size require more computational resources and will impact performance.

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

• "rsa_pkcs1_sha256" (default)
• "rsa_pkcs1_sha384" (default)
• "rsa_pkcs1_sha512" (default)

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

The LocalHost configuration contains the name of the local host as obtained by the Gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the adapter initiate connections (or accept in the case of server adapters) only through that interface.

If the adapter is connected, the LocalHost configuration shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

By default the adapter will use the system security libraries to perform cryptographic functions. When set to False calls to unmanaged code will be made. In certain environments this is not desirable. To use a completely managed security implementation set this setting to True. Setting this to True tells the adapter to use the internal implementation instead of using the system's security API.

Note: This setting is static. The value set is applicable to all adapters used in the application.

When this value is set the product's system DLL is no longer required as a reference, as all unmanaged code is stored in that file.