IP*Works! V9 - Online Help
IP*Works! V9
Questions / Feedback?

NetDial Errors

NetDial Errors

143   Busy executing current method.
200   Can't load the RASAPI library.
201   Can't access the functions of RASAPI library.
300   Can't load the RAS library.
301   Can't access the functions of RAS library.
302   Entry already exists.
303   Error dialing entry. Description contains more detail.
600   An operation is pending.
601   The port handle is invalid.
602   The port is already open.
603   Caller's buffer is too small.
604   Wrong information specified.
605   Cannot set port information.
606   The port is not connected.
607   The event is invalid.
608   The device does not exist.
609   The device type does not exist.
610   The buffer is invalid.
611   The route is not available.
612   The route is not allocated.
613   Invalid compression specified.
614   Out of buffers.
615   The port was not found.
616   An asynchronous request is pending.
617   The port or device is already disconnecting.
618   The port is not open.
619   The port is disconnected.
620   There are no endpoints.
621   Cannot open the phone book file.
622   Cannot load the phone book file.
623   Cannot find the phone book entry.
624   Cannot write the phone book file.
625   Invalid information found in the phone book.
626   Cannot load a string.
627   Cannot find key.
628   The port was disconnected.
629   The port was disconnected by the remote machine.
630   The port was disconnected due to hardware failure.
631   The port was disconnected by the user.
632   The structure size is incorrect.
633   The port is already in use or is not configured for Remote Access dialout.
634   Cannot register your computer on the remote network.
635   Unknown error.
636   The wrong device is attached to the port.
637   The string could not be converted.
638   The request has timed out.
639   No asynchronous net available.
640   A NetBIOS error has occurred.
641   The server cannot allocate NetBIOS resources needed to support the client.
642   One of your NetBIOS names is already registered on the remote network.
643   A network adapter at the server failed.
644   You will not receive network message popups.
645   Internal authentication error.
646   The account is not permitted to log on at this time of day.
647   The account is disabled.
648   The password has expired.
649   The account does not have Remote Access permission.
650   The Remote Access server is not responding.
651   Your modem (or other connecting device) has reported an error.
652   Unrecognized response from the device.
653   A macro required by the device was not found in the device .INF file section.
654   A command or response in the device .INF file section refers to an undefined macro
655   The <message> macro was not found in the device .INF file section.
656   The <defaultoff> macro in the device .INF file section contains an undefined macro
657   The device .INF file could not be opened.
658   The device name in the device .INF or media .INI file is too long.
659   The media .INI file refers to an unknown device name.
660   The device .INF file contains no responses for the command.
661   The device .INF file is missing a command.
662   Attempted to set a macro not listed in device .INF file section.
663   The media .INI file refers to an unknown device type.
664   Cannot allocate memory.
665   The port is not configured for Remote Access.
666   Your modem (or other connecting device) is not functioning.
667   Cannot read the media .INI file.
668   The connection dropped.
669   The usage parameter in the media .INI file is invalid.
670   Cannot read the section name from the media .INI file.
671   Cannot read the device type from the media .INI file.
672   Cannot read the device name from the media .INI file.
673   Cannot read the usage from the media .INI file.
674   Cannot read the maximum connection BPS rate from the media .INI file.
675   Cannot read the maximum carrier BPS rate from the media .INI file.
676   The line is busy.
677   A person answered instead of a modem.
678   There is no answer.
679   Cannot detect carrier.
680   There is no dial tone.
681   General error reported by device.
682   ERROR WRITING SECTIONNAME
683   ERROR WRITING DEVICETYPE
684   ERROR WRITING DEVICENAME
685   ERROR WRITING MAXCONNECTBPS
686   ERROR WRITING MAXCARRIERBPS
687   ERROR WRITING USAGE
688   ERROR WRITING DEFAULTOFF
689   ERROR READING DEFAULTOFF
690   ERROR EMPTY INI FILE
691   Access denied because username and/or password is invalid on the domain.
692   Hardware failure in port or attached device.
693   ERROR NOT BINARY MACRO
694   ERROR DCB NOT FOUND
695   ERROR STATE MACHINES NOT STARTED
696   ERROR STATE MACHINES ALREADY STARTED
697   ERROR PARTIAL RESPONSE LOOPING
698   A response keyname in the device .INF file is not in the expected format.
699   The device response caused buffer overflow.
700   The expanded command in the device .INF file is too long.
701   The device moved to a BPS rate not supported by the COM driver.
702   Device response received when none expected.
703   ERROR INTERACTIVE MODE
704   ERROR BAD CALLBACK NUMBER
705   ERROR INVALID AUTH STATE
706   ERROR WRITING INITBPS
707   X.25 diagnostic indication.
708   The account has expired.
709   Error changing password on domain.
710   Serial overrun errors were detected while communicating with your modem.
711   RasMan initialization failure. Check the event log.
712   Biplex port is initializing. Wait a few seconds and redial.
713   No active ISDN lines are available.
714   Not enough ISDN channels are available to make the call.
715   Too many errors occurred because of poor phone line quality.
716   The Remote Access IP configuration is unusable.
717   No IP addresses are available in the static pool of Remote Access IP addresses.
718   PPP timeout.
719   PPP terminated by remote machine.
720   No PPP control protocols configured.
721   Remote PPP peer is not responding.
722   The PPP packet is invalid.
723   The phone number, including prefix and suffix, is too long.
724   The IPX protocol cannot dial-out on the port because the computer is an IPX router.
725   The IPX protocol cannot dial-in on the port because the IPX router is not installed.
726   The IPX protocol cannot be used for dial-out on more than one port at a time.
727   Cannot access TCPCFG.DLL.
728   Cannot find an IP adapter bound to Remote Access.
729   SLIP cannot be used unless the IP protocol is installed.
730   Computer registration is not complete.
731   The protocol is not configured.
732   The PPP negotiation is not converging.
733   The PPP control protocol for this network protocol is not available on the server.
734   The PPP link control protocol terminated..
735   The requested address was rejected by the server..
736   The remote computer terminated the control protocol.
737   Loopback detected..
738   The server did not assign an address.
739   The remote server cannot use the Windows NT encrypted password.
740   The TAPI devices configured for Remote Access failed to initialize or were not installed correctly.
741   The local computer does not support encryption.
742   The remote server does not support encryption.
743   The remote server requires encryption.
744   Cannot use the IPX net number assigned by the remote server. Check the event log.
745   ERROR_INVALID_SMM
746   ERROR_SMM_UNINITIALIZED
747   ERROR_NO_MAC_FOR_PORT
748   ERROR_SMM_TIMEOUT
749   ERROR_BAD_PHONE_NUMBER
750   ERROR_WRONG_MODULE
751   The callback number contains an invalid character. Only the following 18 characters are allowed: 0 to 9, T, P, W, (, ), -, @, and space
752   A syntax error was encountered while processing a script.
753   The connection could not be disconnected because it was created by the multi-protocol router.
754   The system could not find the multi-link bundle.
755   The system cannot perform automated dial because this connection has a custom dialer specified.
756   This connection is already being dialed.
757   Remote Access Services could not be started automatically. Additional information is provided in the event log.
758   Internet Connection Sharing is already enabled on the connection.
759   An error occurred while the existing Internet Connection Sharing settings were being changed.
760   An error occurred while routing capabilities were being enabled.
761   An error occurred while Internet Connection Sharing was being enabled for the connection.
762   An error occurred while the local network was being configured for sharing.
763   Internet Connection Sharing cannot be enabled. There is more than one LAN connection other than the connection to be shared.
764   No smart card reader is installed.
765   Internet Connection Sharing cannot be enabled. A LAN connection is already configured with the IP address that is required for automatic IP addressing.
766   A certificate could not be found. Connections that use the L2TP protocol over IPSec require the installation of a machine certificate, also known as a computer certificate.
767   Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network has more than one IP address configured. Please reconfigure the LAN connection with a single IP address before enabling Internet Connection Sharing.
768   The connection attempt failed because of failure to encrypt data.
769   The specified destination is not reachable.
770   The remote computer rejected the connection attempt.
771   The connection attempt failed because the network is busy.
772   The remote computer's network hardware is incompatible with the type of call requested.
773   The connection attempt failed because the destination number has changed.
774   The connection attempt failed because of a temporary failure. Try connecting again.
775   The call was blocked by the remote computer.
776   The call could not be connected because the remote computer has invoked the Do Not Disturb feature.
777   The connection attempt failed because the modem (or other connecting device on the remote computer is out of order.
778   It was not possible to verify the identity of the server.
779   To dial out using this connection you must use a smart card.
780   An attempted function is not valid for this connection.
781   The connection requires a certificate, and no valid certificate was found. For further assistance, click More Info or search Help and Support Center for this error number.
782   Internet Connection Sharing (ICS and Internet Connection Firewall (ICF cannot be enabled because Routing and Remote Access has been enabled on this computer. To enable ICS or ICF, first disable Routing and Remote Access. For more information about Routing and Remote Access, ICS, or ICF, see Help and Support.
783   Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network is either not present, or is disconnected from the network. Please ensure that the LAN adapter is connected before enabling Internet Connection Sharing.
784   You cannot dial using this connection at logon time, because it is configured to use a user name different than the one on the smart card. If you want to use it at logon time, you must configure it to use the user name on the smart card.
785   You cannot dial using this connection at logon time, because it is not configured to use a smart card. If you want to use it at logon time, you must edit the properties of this connection so that it uses a smart card.
786   The L2TP connection attempt failed because there is no valid machine certificate on your computer for security authentication.
787   The L2TP connection attempt failed because the security layer could not authenticate the remote computer.
788   The L2TP connection attempt failed because the security layer could not negotiate compatible parameters with the remote computer.
789   The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer.
790   The L2TP connection attempt failed because certificate validation on the remote computer failed.
791   The L2TP connection attempt failed because security policy for the connection was not found.
792   The L2TP connection attempt failed because security negotiation timed out.
793   The L2TP connection attempt failed because an error occurred while negotiating security.
794   The Framed Protocol RADIUS attribute for this user is not PPP.
795   The Tunnel Type RADIUS attribute for this user is not correct.
796   The Service Type RADIUS attribute for this user is neither Framed nor Callback Framed.
797   A connection to the remote computer could not be established because the modem was not found or was busy. For further assistance, click More Info or search Help and Support Center for this error number.
798   A certificate could not be found that can be used with this Extensible Authentication Protocol.
799   Internet Connection Sharing (ICS cannot be enabled due to an IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1. Please ensure that no other client on the network is configured to use 192.168.0.1.
800   Unable to establish the VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection.
801   This connection is configured to validate the identity of the access server, but Windows cannot verify the digital certificate sent by the server.
802   The card supplied was not recognized. Please check that the card is inserted correctly, and fits tightly.
803   The PEAP configuration stored in the session cookie does not match the current session configuration.
804   The PEAP identity stored in the session cookie does not match the current identity.
805   You cannot dial using this connection at logon time, because it is configured to use logged on user's credentials.
900   The router is not running.
901   The interface is already connected.
902   The specified protocol identifier is not known to the router.
903   The Demand-dial Interface Manager is not running.
904   An interface with this name is already registered with the router.
905   An interface with this name is not registered with the router.
906   The interface is not connected.
907   The specified protocol is stopping.
908   The interface is connected and hence cannot be deleted.
909   The interface credentials have not been set.
910   This interface is already in the process of connecting.
911   An update of routing information on this interface is already in progress.
912   The interface configuration in invalid. There is already another interface that is connected to the same interface on the remote router.
913   A Remote Access Client attempted to connect over a port that was reserved for Routers only.
914   A Demand Dial Router attempted to connect over a port that was reserved for Remote Access Clients only.
915   The client interface with this name already exists and is currently connected.
916   The interface is in a disabled state.
917   The authentication protocol was rejected by the remote peer.
918   There are no authentication protocols available for use.
919   The remote computer refused to be authenticated using the configured authentication protocol. The line has been disconnected.
920   The remote account does not have Remote Access permission.
921   The remote account has expired.
922   The remote account is disabled.
923   The remote account is not permitted to logon at this time of day.
924   Access was denied to the remote peer because username and/or password is invalid on the domain.
925   There are no routing enabled ports available for use by this demand dial interface.
926   The port has been disconnected due to inactivity.
927   The interface is not reachable at this time.
928   The Demand Dial service is in a paused state.
929   The interface has been disconnected by the administrator.
930   The authentication server did not respond to authentication requests in a timely fashion.
931   The maximum number of ports allowed for use in the multilinked connection has been reached.
932   The connection time limit for the user has been reached.
933   The maximum limit on the number of LAN interfaces supported has been reached.
934   The maximum limit on the number of Demand Dial interfaces supported has been reached.
935   The maximum limit on the number of Remote Access clients supported has been reached.
936   The port has been disconnected due to the BAP policy.
937   Because another connection of your type is in use, the incoming connection cannot accept your connection request.
938   No RADIUS servers were located on the network.
939   An invalid response was received from the RADIUS authentication server. Make sure that the case sensitive secret password for the RADIUS server is set correctly.
940   You do not have permission to connect at this time.
941   You do not have permission to connect using the current device type.
942   You do not have permission to connect using the selected authentication protocol.
943   BAP is required for this user.
944   The interface is not allowed to connect at this time.
945   The saved router configuration is incompatible with the current router.
946   RemoteAccess has detected older format user accounts that will not be migrated automatically. To migrate these manually, run XXXX.
948   The transport is already installed with the router.
949   Received invalid signature length in packet from RADIUS server.
950   Received invalid signature in packet from RADIUS server.
951   Did not receive signature along with EAPMessage from RADIUS server.
952   Received packet with invalid length or Id from RADIUS server.
953   Received packet with attribute with invalid length from RADIUS server.
954   Received invalid packet from RADIUS server.
955   Authenticator does not match in packet from RADIUS server.

 
 
Copyright (c) 2018 /n software inc. - All rights reserved.
Build 9.0.6635.0