# PDFExplorer Component

The PDFExplorer component provides access to the low-level PDF document structure.

## Syntax

```text
TispPDFExplorer
```

## Remarks

The PDFExplorer component can be used to inspect the internals of a PDF document and make changes to the low-level document structure.

### Object Types and Document Structure

The PDF specification defines eight object types:

- Name
- String
- Real
- Integer
- Boolean
- Array
- Dictionary
- Stream

 In PDFExplorer, name, string, real, integer, and boolean objects are categorized as "primitive" objects, and array, dictionary, and stream objects are categorized as "container" objects.

Before accessing individual objects with the component, it is important to understand how they are structured in the document. PDFExplorer aims to distinguish between the logical and physical representations of objects.

The **logical representation** is that a PDF document is a tree of objects that can be traversed to extract data. For example, every document contains a document catalog that references a next-level object */Pages*, which in turn references individual pages via a */Kids* array. So to get a page, you would first look for the */Root* object in the document trailer, then proceed to its */Pages* element, and then work with the */Kids* array.

Then, there is the **physical structure** that consists of all the objects that constitute the document. Every object is recorded as either:

- A direct (in-place) object (e.g., */Numbers [1 2 3 888]*),
- An indirect (numbered) object, or
- A reference to an indirect object (e.g., */Numbers 8 0 R*).

 The way the objects are physically stored is generally independent from their logical structure. If you are looking for a page, it is of little importance whether each object that you need to traverse to reach it is stored in-place, in one of the indirect objects, or in a compressed object stream.

Note that most heavy objects (such as streams and dictionaries) are recorded in PDF files as indirect objects, with other objects referencing them. An indirect object is a global object that is uniquely identified by its object number followed by its generation number (e.g., *1 0 obj*).

### Navigating the Document

 To navigate the object tree, first provide the input document as a file ([InputFile](#inputfile-property-pdfexplorer-component)), byte array ([InputData](#inputdata-property-pdfexplorer-component)), or stream (SetInputStream) and call [Open](#open-method-pdfexplorer-component). This method populates the RootObjects properties with the existing objects in the document trailer, as the trailer is considered to be the root of the logical object tree. The keys in the document trailer are typically */Size*, */Info*, */Root*, */ID*, and */Encrypt* for encrypted documents.

These objects can then be used as a starting point for the document tree navigation, which is done using [Select](#select-method-pdfexplorer-component). This method and others operate the following syntax for specifying objects in the document:

- Slashes separate levels of hierarchy, like in file paths.
- The "root" slash (*/*) points to the document trailer dictionary.
- A path that does not start with a slash specifies an indirect object in the list of global numbered objects.
- The asterisk character (***) specifies all objects at the provided path.

 **Examples:**

Consider the following PDF document:

```text
%PDF-1.4
%cmmt
1 0 obj
<< /Type /Catalog
/Pages 2 0 R
>>
endobj

2 0 obj
<< /Type /Pages
/Kids [ 3 0 R ]
/Count 1
>>
endobj

3 0 obj
<< /Type /Page
/Parent 2 0 R
/MediaBox [ 0  0  612  792 ]
/Resources << /ProcSet 4 0 R >>
>>
endobj

4 0 obj
[ /PDF ]
endobj

xref
0 5
0000000000 65535 f
0000000015 00000 n
0000000065 00000 n
0000000125 00000 n
0000000234 00000 n
trailer
<< /Size 5
/Root 1 0 R
>>
startxref
259
%%EOF
```

[Select](#select-method-pdfexplorer-component) would return the following results for the respective paths:

- */* - a dictionary object that corresponds to the *trailer* dictionary.
- */Root* - a dictionary object that corresponds to the dictionary at *1 0 obj*, with its  set to *podReference* (as this is a reference to an indirect object).
- */Size* - an integer object whose  is *5* and  is *podDirect* (as this is a direct, in-place object).
- */Root/Type* - a name object whose  is *Catalog* ( = *podDirect*).
- */Root/Pages* - a dictionary object that corresponds to the dictionary at *2 0 obj* ( = *podReference*).
- */Root/Pages/Kids* - an array object ( = *podDirect*).
- */Root/Pages/Kids[0]* - a dictionary object that corresponds to the dictionary at *3 0 obj* ( = *podReference*).
- */Root/Pages/Kids[0]/MediaBox* - an array object with four integer elements ( = *podDirect*).
- */Root/Pages/Kids[0]/MediaBox[2]* - an integer object whose  is *612* ( = *podDirect*).
- *3 0 obj* - a dictionary object that corresponds to the dictionary at *3 0 obj* ( = *podIndirect*).
- *3 0 obj/Type* - a name object whose  is *Page* ( = *podDirect*).
- *3 0 obj/Parent* - a dictionary object that corresponds to the dictionary at *2 0 obj* ( = *podReference*).

 Once [Select](#select-method-pdfexplorer-component) returns, the selected object(s) will be available in the SelectedObjects properties.

### Adding and Modifying Objects

 The below sections contain instructions for adding and modifying each type of object. Note that each of the following *Add** methods returns the path to the newly added object in the document, making it easy to access the PDFObject object later using [Select](#select-method-pdfexplorer-component). These objects' values can then be adjusted to ensure the PDF document meets your requirements.

**Primitive Objects**

A primitive object is a non-container object that represents a name, string, real (double), integer, or boolean value. Primitive objects are typically stored in-place and referenced directly. Use the [AddPrimitive](#addprimitive-method-pdfexplorer-component) method to add a direct primitive object and the [AddObject](#addobject-method-pdfexplorer-component) method (passing *true* to the *Indirect* parameter) to add an indirect primitive object:

```csharp
// Adding a direct string object to the /Info dictionary
string stringPath = pdfexplorer.AddPrimitive("/Info", "Creator", "Microsoft Word");

// Adding an indirect boolean object to the root
string booleanPath = pdfexplorer.AddObject("", (int)PDFObjectTypes.potBoolean, "", "true", true);
```

```text
5 0 obj
<<
...
/Creator (Microsoft Word)
>>
endobj

...

6 0 obj
true
endobj
```

The value of a primitive object can then be modified if desired:

```csharp
pdfexplorer.Select(stringPath, true);
pdfexplorer.SelectedObjects[0].Value = "nsoftware.SecurePDF";

pdfexplorer.Select(booleanPath, true);
pdfexplorer.SelectedObjects[0].Value = "false";
```

```text
5 0 obj
<<
...
/Creator (nsoftware.SecurePDF)
>>
endobj

...

6 0 obj
false
endobj
```

**Array and Dictionary Objects**

Unlike primitives, arrays and dictionaries are objects that contain other objects. Elements within array objects are arranged sequentially and have implicit zero-based indices, whereas dictionary objects contain named key-value pairs that are unordered. Use the [AddContainer](#addcontainer-method-pdfexplorer-component) method to add a direct or indirect array or dictionary object:

```csharp
// Adding a direct array object to the first page's /Page dictionary
string arrayPath = pdfexplorer.AddContainer("/Root/Pages/Kids[0]", "CropBox", false, false);

// Adding an indirect dictionary object to the root
string dictPath = pdfexplorer.AddContainer("", "", true, true);
```

```text
3 0 obj
<< /Type /Page
...
/CropBox [
]>>
endobj

...

7 0 obj
<<
>>
endobj
```

An array or dictionary object can then be modified by adding elements to it. The example below populates the */CropBox* array with four integer objects and adds a */Type* key to the newly created dictionary.

```csharp
string cropBox0Path = pdfexplorer.AddPrimitive(arrayPath, "", "0");
string cropBox1Path = pdfexplorer.AddPrimitive(arrayPath, "", "0");
string cropBox2Path = pdfexplorer.AddPrimitive(arrayPath, "", "612");
string cropBox3Path = pdfexplorer.AddPrimitive(arrayPath, "", "792");

string typePath = pdfexplorer.AddPrimitive(dictPath, "Type", "/SampleType");
```

```text
3 0 obj
<< /Type /Page
...
/CropBox [
0
0
612
792
]>>
endobj

...

7 0 obj
<<
/Type /SampleType
>>
endobj
```

**Stream Objects**

A stream object is a compound object consisting of a dictionary and a sequence of bytes. Stream objects are always indirect and are used to store data such as images, fonts, and other resources. Use the [AddStream](#addstream-method-pdfexplorer-component) method to add a stream object:

```csharp
// Adding a stream object to the root
byte[] image1Data = File.ReadAllBytes("image1.png");
string streamPath = pdfexplorer.AddStream("", "", image1Data);
```

```text
8 0 obj
<<
/Length 6317
>>stream
... % binary data for image1.png
endstream
endobj
```

To modify a stream object, use the [SetObjectData](#setobjectdata-method-pdfexplorer-component) or SetObjectStream method:

```csharp
byte[] image2Data = File.ReadAllBytes("image2.png");
pdfexplorer.SetObjectData(streamPath, image2Data);
// or pdfexplorer.SetObjectStream(streamPath, new MemoryStream(image2Data));
```

```text
8 0 obj
<<
/Length 197
>>stream
... % binary data for image2.png
endstream
endobj
```

**Object References**

An (indirect) object reference is a reference to an indirect object from another object. Its syntax consists of the destination object's object number, its generation number, and *R* (e.g., *1 0 R*). Use the [AddReference](#addreference-method-pdfexplorer-component) method to add a reference to an existing object:

```csharp
// Creating a reference to the stream at 8 0 obj and adding it to the dictionary at 7 0 obj
string path = pdfexplorer.AddReference("7 0 obj", "Image", "8 0 obj");
```

```text
7 0 obj
<<
/Image 8 0 R
/Type /SampleType
>>
endobj
```

The contents of the destination object can be modified using the path returned by [AddReference](#addreference-method-pdfexplorer-component) in the same way as any other indirect object - the reference remains intact because the object and generation numbers of the destination object are not affected.

### Removing Objects

 The [RemoveObject](#removeobject-method-pdfexplorer-component) method can be used to remove an object from the document. While this method invalidates the former path to the object itself, it does not remove any references to it if it was an indirect object.

```csharp
pdfexplorer.RemoveObject("7 0 obj/Image");
```

```text
7 0 obj
<<
/Type /SampleType
>>
endobj
```

When finished adding, modifying, or removing objects, call [Close](#close-method-pdfexplorer-component) to close the document and save the changes to either [OutputFile](#outputfile-property-pdfexplorer-component), [OutputData](#outputdata-property-pdfexplorer-component), or the stream set in SetOutputStream.

## Property List

*The following is the full list of the properties of the component with short descriptions. Click on the links for further details.*

|  |  |
| --- | --- |
| [InputData](#inputdata-property-pdfexplorer-component) | A byte array containing the PDF document to process. |
| [InputFile](#inputfile-property-pdfexplorer-component) | The PDF file to process. |
| [OutputData](#outputdata-property-pdfexplorer-component) | A byte array containing the PDF document after processing. |
| [OutputFile](#outputfile-property-pdfexplorer-component) | The path to a local file where the output is written. |
| [Overwrite](#overwrite-property-pdfexplorer-component) | Whether the component should overwrite files. |
| [RootObjectCount](#rootobjectcount-property-pdfexplorer-component) | The number of records in the RootObject arrays. |
| [RootObjectContainer](#rootobjectcontainer-property-pdfexplorer-component) | Whether the object is a container for other objects (i. |
| [RootObjectDisposition](#rootobjectdisposition-property-pdfexplorer-component) | The method by which the object is addressed in the document. |
| [RootObjectElementCount](#rootobjectelementcount-property-pdfexplorer-component) | The number of sub-elements in the object, such as keys in the dictionary or elements in the array. |
| [RootObjectGenNumber](#rootobjectgennumber-property-pdfexplorer-component) | The generation number of the indirect (top-level) object. |
| [RootObjectKeys](#rootobjectkeys-property-pdfexplorer-component) | A CRLF-separated list of the keys of the dictionary or indices of the array. |
| [RootObjectObjectNumber](#rootobjectobjectnumber-property-pdfexplorer-component) | The object number of the indirect (top-level) object. |
| [RootObjectObjectType](#rootobjectobjecttype-property-pdfexplorer-component) | The type of the object. |
| [RootObjectOffset](#rootobjectoffset-property-pdfexplorer-component) | The start offset of the object, in bytes, from the beginning of the PDF document. |
| [RootObjectPath](#rootobjectpath-property-pdfexplorer-component) | The path to the object, for example /Root/Pages . |
| [RootObjectSize](#rootobjectsize-property-pdfexplorer-component) | The physical length of the object in bytes. |
| [RootObjectValue](#rootobjectvalue-property-pdfexplorer-component) | The value of the object. |
| [SelectedObjectCount](#selectedobjectcount-property-pdfexplorer-component) | The number of records in the SelectedObject arrays. |
| [SelectedObjectContainer](#selectedobjectcontainer-property-pdfexplorer-component) | Whether the object is a container for other objects (i. |
| [SelectedObjectDisposition](#selectedobjectdisposition-property-pdfexplorer-component) | The method by which the object is addressed in the document. |
| [SelectedObjectElementCount](#selectedobjectelementcount-property-pdfexplorer-component) | The number of sub-elements in the object, such as keys in the dictionary or elements in the array. |
| [SelectedObjectGenNumber](#selectedobjectgennumber-property-pdfexplorer-component) | The generation number of the indirect (top-level) object. |
| [SelectedObjectKeys](#selectedobjectkeys-property-pdfexplorer-component) | A CRLF-separated list of the keys of the dictionary or indices of the array. |
| [SelectedObjectObjectNumber](#selectedobjectobjectnumber-property-pdfexplorer-component) | The object number of the indirect (top-level) object. |
| [SelectedObjectObjectType](#selectedobjectobjecttype-property-pdfexplorer-component) | The type of the object. |
| [SelectedObjectOffset](#selectedobjectoffset-property-pdfexplorer-component) | The start offset of the object, in bytes, from the beginning of the PDF document. |
| [SelectedObjectPath](#selectedobjectpath-property-pdfexplorer-component) | The path to the object, for example /Root/Pages . |
| [SelectedObjectSize](#selectedobjectsize-property-pdfexplorer-component) | The physical length of the object in bytes. |
| [SelectedObjectValue](#selectedobjectvalue-property-pdfexplorer-component) | The value of the object. |

## Method List

*The following is the full list of the methods of the component with short descriptions. Click on the links for further details.*

|  |  |
| --- | --- |
| [AddContainer](#addcontainer-method-pdfexplorer-component) | Adds a dictionary or array object to the document. |
| [AddObject](#addobject-method-pdfexplorer-component) | Inserts an object into the document. |
| [AddOpaque](#addopaque-method-pdfexplorer-component) | Adds an opaque piece of PDF to the document. |
| [AddPrimitive](#addprimitive-method-pdfexplorer-component) | Adds a primitive object to the document. |
| [AddReference](#addreference-method-pdfexplorer-component) | Adds an object reference to the document. |
| [AddStream](#addstream-method-pdfexplorer-component) | Adds a stream object to the document. |
| [Close](#close-method-pdfexplorer-component) | Closes the opened document. |
| [Config](#config-method-pdfexplorer-component) | Sets or retrieves a configuration setting. |
| [CreateNew](#createnew-method-pdfexplorer-component) | Creates a new PDF document. |
| [GetObjectData](#getobjectdata-method-pdfexplorer-component) | Returns the content of a stream object. |
| [Open](#open-method-pdfexplorer-component) | Opens the document for processing. |
| [RemoveObject](#removeobject-method-pdfexplorer-component) | Removes an object from the document. |
| [Reset](#reset-method-pdfexplorer-component) | Resets the component. |
| [Select](#select-method-pdfexplorer-component) | Selects an object or multiple objects from the document. |
| [SetObjectData](#setobjectdata-method-pdfexplorer-component) | Sets the content of a stream object. |

## Event List

*The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.*

|  |  |
| --- | --- |
| [Error](#error-event-pdfexplorer-component) | Fired when information is available about errors during data delivery. |
| [Log](#log-event-pdfexplorer-component) | Fired once for each log message. |

## Config Settings

*The following is a list of config settings for the component with short descriptions. Click on the links for further details.*

|  |  |
| --- | --- |
| [CloseInputStreamAfterProcessing](#CloseInputStreamAfterProcessing) | Whether to close the input stream after processing. |
| [CloseOutputStreamAfterProcessing](#CloseOutputStreamAfterProcessing) | Whether to close the output stream after processing. |
| [LogLevel](#LogLevel) | The level of detail that is logged. |
| [SaveChanges](#SaveChanges) | Whether to save changes made to the document. |
| [StringEncoding](#StringEncoding) | The encoding to use for string objects. |
| [TempPath](#TempPath) | The location where temporary files are stored. |
| [BuildInfo](#BuildInfo) | Information about the product's build. |
| [CodePage](#CodePage) | The system code page used for Unicode to Multibyte translations. |
| [LicenseInfo](#LicenseInfo) | Information about the current license. |
| [MaskSensitiveData](#MaskSensitiveData) | Whether sensitive data is masked in log messages. |
| [UseInternalSecurityAPI](#UseInternalSecurityAPI) | Whether or not to use the system security libraries or an internal implementation. |

# InputData Property ([PDFExplorer](#pdfexplorer-component) Component)

A byte array containing the PDF document to process.

## Syntax

*C++ Builder Syntax*

```text
__property DynamicArray InputData = { read=FInputData, write=FSetInputData };
```

## Remarks

This property is used to assign a byte array containing the PDF document to be processed.

This property is not available at design time.

## Data Type

Byte Array

# InputFile Property ([PDFExplorer](#pdfexplorer-component) Component)

The PDF file to process.

## Syntax

*C++ Builder Syntax*

```text
__property String InputFile = { read=FInputFile, write=FSetInputFile };
```

## Default Value

""

## Remarks

This property is used to provide a path to the PDF document to be processed.

## Data Type

String

# OutputData Property ([PDFExplorer](#pdfexplorer-component) Component)

A byte array containing the PDF document after processing.

## Syntax

*C++ Builder Syntax*

```text
__property DynamicArray OutputData = { read=FOutputData };
```

## Remarks

This property is used to read the byte array containing the produced output after the operation has completed. It is only set if an output file and output stream have not been assigned via [OutputFile](#outputfile-property-pdfexplorer-component) and SetOutputStream respectively.

This property is read-only and not available at design time.

## Data Type

Byte Array

# OutputFile Property ([PDFExplorer](#pdfexplorer-component) Component)

The path to a local file where the output is written.

## Syntax

*C++ Builder Syntax*

```text
__property String OutputFile = { read=FOutputFile, write=FSetOutputFile };
```

## Default Value

""

## Remarks

This property is used to provide a path where the resulting PDF document is saved after the operation has completed.

## Data Type

String

# Overwrite Property ([PDFExplorer](#pdfexplorer-component) Component)

Whether the component should overwrite files.

## Syntax

*C++ Builder Syntax*

```text
__property bool Overwrite = { read=FOverwrite, write=FSetOverwrite };
```

## Default Value

false

## Remarks

This property indicates whether the component overwrites [OutputFile](#outputfile-property-pdfexplorer-component). If set to *false*, an error is thrown whenever [OutputFile](#outputfile-property-pdfexplorer-component) exists before an operation.

## Data Type

Boolean

# RootObjectCount Property ([PDFExplorer](#pdfexplorer-component) Component)

The number of records in the RootObject arrays.

## Syntax

*C++ Builder Syntax*

```text
__property int RootObjectCount = { read=FRootObjectCount };
```

## Default Value

0

## Remarks

This property controls the size of the following arrays:

- [RootObjectContainer](#rootobjectcontainer-property-pdfexplorer-component)
- [RootObjectDisposition](#rootobjectdisposition-property-pdfexplorer-component)
- [RootObjectElementCount](#rootobjectelementcount-property-pdfexplorer-component)
- [RootObjectGenNumber](#rootobjectgennumber-property-pdfexplorer-component)
- [RootObjectKeys](#rootobjectkeys-property-pdfexplorer-component)
- [RootObjectObjectNumber](#rootobjectobjectnumber-property-pdfexplorer-component)
- [RootObjectObjectType](#rootobjectobjecttype-property-pdfexplorer-component)
- [RootObjectOffset](#rootobjectoffset-property-pdfexplorer-component)
- [RootObjectPath](#rootobjectpath-property-pdfexplorer-component)
- [RootObjectSize](#rootobjectsize-property-pdfexplorer-component)
- [RootObjectValue](#rootobjectvalue-property-pdfexplorer-component)

The array indices start at *0* and end at *RootObjectCount - 1*.

This property is read-only and not available at design time.

## Data Type

Integer

# RootObjectContainer Property ([PDFExplorer](#pdfexplorer-component) Component)

Whether the object is a container for other objects (i.

## Syntax

*C++ Builder Syntax*

```text
__property bool RootObjectContainer[int RootObjectIndex] = { read=FRootObjectContainer };
```

## Default Value

false

## Remarks

Whether the object is a container for other objects (i.e., a dictionary, array, or stream).

The *RootObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [RootObjectCount](#rootobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

Boolean

# RootObjectDisposition Property ([PDFExplorer](#pdfexplorer-component) Component)

The method by which the object is addressed in the document.

## Syntax

*C++ Builder Syntax*

```text
__property TispPDFExplorerRootObjectDispositions RootObjectDisposition[int RootObjectIndex] = { read=FRootObjectDisposition };
enum TispPDFExplorerRootObjectDispositions {
  podDirect=0,
  podReference=1,
  podIndirect=2
};
```

## Default Value

podDirect

## Remarks

The method by which the object is addressed in the document.

Possible values are:

|  |  |
| --- | --- |
| 0 (podDirect - default) | The object is recorded in-place. |
| 1 (podReference) | The object is recorded as a reference to an indirect object. |
| 2 (podIndirect) | The object is an indirect object. |

**Example:**

```text
5 0 obj
<<
  /KeyM (Electricity)
>>

...

<<
  /KeyA (Some Value)
  /KeyB << /X /Y >>
  /KeyC 5 0 R
>>
```

- The value of */KeyA* (*Some Value*) is a direct string object.
- The value of */X* (*/Y*) is a direct name object.
- The value of */KeyB* is a direct dictionary object.
- The value of */KeyC* is a reference to the indirect dictionary object *5 0 obj*.
- The value of *5 0 obj* is an indirect dictionary object.

The *RootObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [RootObjectCount](#rootobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

Integer

# RootObjectElementCount Property ([PDFExplorer](#pdfexplorer-component) Component)

The number of sub-elements in the object, such as keys in the dictionary or elements in the array.

## Syntax

*C++ Builder Syntax*

```text
__property int RootObjectElementCount[int RootObjectIndex] = { read=FRootObjectElementCount };
```

## Default Value

0

## Remarks

The number of sub-elements in the object, such as keys in the dictionary or elements in the array.

The *RootObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [RootObjectCount](#rootobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

Integer

# RootObjectGenNumber Property ([PDFExplorer](#pdfexplorer-component) Component)

The generation number of the indirect (top-level) object.

## Syntax

*C++ Builder Syntax*

```text
__property int RootObjectGenNumber[int RootObjectIndex] = { read=FRootObjectGenNumber };
```

## Default Value

0

## Remarks

The generation number of the indirect (top-level) object.

The *RootObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [RootObjectCount](#rootobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

Integer

# RootObjectKeys Property ([PDFExplorer](#pdfexplorer-component) Component)

A CRLF-separated list of the keys of the dictionary or indices of the array.

## Syntax

*C++ Builder Syntax*

```text
__property String RootObjectKeys[int RootObjectIndex] = { read=FRootObjectKeys };
```

## Default Value

""

## Remarks

A CRLF-separated list of the keys of the dictionary or indices of the array.

The *RootObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [RootObjectCount](#rootobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

String

# RootObjectObjectNumber Property ([PDFExplorer](#pdfexplorer-component) Component)

The object number of the indirect (top-level) object.

## Syntax

*C++ Builder Syntax*

```text
__property int RootObjectObjectNumber[int RootObjectIndex] = { read=FRootObjectObjectNumber };
```

## Default Value

0

## Remarks

The object number of the indirect (top-level) object.

The *RootObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [RootObjectCount](#rootobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

Integer

# RootObjectObjectType Property ([PDFExplorer](#pdfexplorer-component) Component)

The type of the object.

## Syntax

*C++ Builder Syntax*

```text
__property TispPDFExplorerRootObjectObjectTypes RootObjectObjectType[int RootObjectIndex] = { read=FRootObjectObjectType };
enum TispPDFExplorerRootObjectObjectTypes {
  potUndefined=0,
  potName=1,
  potString=2,
  potReal=3,
  potInteger=4,
  potBoolean=5,
  potArray=6,
  potDictionary=7,
  potStream=8
};
```

## Default Value

potUndefined

## Remarks

The type of the object.

Possible values are:

|  |  |
| --- | --- |
| 0 (potUndefined - default) | Undefined or unknown object type. |
| 1 (potName) | A name. |
| 2 (potString) | A string. |
| 3 (potReal) | A real number. |
| 4 (potInteger) | An integer number. |
| 5 (potBoolean) | A boolean value. |
| 6 (potArray) | An array. This object may have sub-objects. |
| 7 (potDictionary) | A dictionary. This object may have sub-objects. |
| 8 (potStream) | A data stream. |

The *RootObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [RootObjectCount](#rootobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

Integer

# RootObjectOffset Property ([PDFExplorer](#pdfexplorer-component) Component)

The start offset of the object, in bytes, from the beginning of the PDF document.

## Syntax

*C++ Builder Syntax*

```text
__property __int64 RootObjectOffset[int RootObjectIndex] = { read=FRootObjectOffset };
```

## Default Value

0

## Remarks

The start offset of the object, in bytes, from the beginning of the PDF document.

The *RootObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [RootObjectCount](#rootobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

Long64

# RootObjectPath Property ([PDFExplorer](#pdfexplorer-component) Component)

The path to the object, for example /Root/Pages .

## Syntax

*C++ Builder Syntax*

```text
__property String RootObjectPath[int RootObjectIndex] = { read=FRootObjectPath };
```

## Default Value

""

## Remarks

The path to the object, for example */Root/Pages*.

The *RootObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [RootObjectCount](#rootobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

String

# RootObjectSize Property ([PDFExplorer](#pdfexplorer-component) Component)

The physical length of the object in bytes.

## Syntax

*C++ Builder Syntax*

```text
__property __int64 RootObjectSize[int RootObjectIndex] = { read=FRootObjectSize };
```

## Default Value

0

## Remarks

The physical length of the object in bytes.

The *RootObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [RootObjectCount](#rootobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

Long64

# RootObjectValue Property ([PDFExplorer](#pdfexplorer-component) Component)

The value of the object.

## Syntax

*C++ Builder Syntax*

```text
__property String RootObjectValue[int RootObjectIndex] = { read=FRootObjectValue, write=FSetRootObjectValue };
```

## Default Value

""

## Remarks

The value of the object.

NOTE: This property only applies to primitive objects (strings, names, integers, reals, and booleans). To access and modify contents of complex objects such as streams, use [GetObjectData](#getobjectdata-method-pdfexplorer-component) and [SetObjectData](#setobjectdata-method-pdfexplorer-component).

The *RootObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [RootObjectCount](#rootobjectcount-property-pdfexplorer-component) property.

This property is not available at design time.

## Data Type

String

# SelectedObjectCount Property ([PDFExplorer](#pdfexplorer-component) Component)

The number of records in the SelectedObject arrays.

## Syntax

*C++ Builder Syntax*

```text
__property int SelectedObjectCount = { read=FSelectedObjectCount };
```

## Default Value

0

## Remarks

This property controls the size of the following arrays:

- [SelectedObjectContainer](#selectedobjectcontainer-property-pdfexplorer-component)
- [SelectedObjectDisposition](#selectedobjectdisposition-property-pdfexplorer-component)
- [SelectedObjectElementCount](#selectedobjectelementcount-property-pdfexplorer-component)
- [SelectedObjectGenNumber](#selectedobjectgennumber-property-pdfexplorer-component)
- [SelectedObjectKeys](#selectedobjectkeys-property-pdfexplorer-component)
- [SelectedObjectObjectNumber](#selectedobjectobjectnumber-property-pdfexplorer-component)
- [SelectedObjectObjectType](#selectedobjectobjecttype-property-pdfexplorer-component)
- [SelectedObjectOffset](#selectedobjectoffset-property-pdfexplorer-component)
- [SelectedObjectPath](#selectedobjectpath-property-pdfexplorer-component)
- [SelectedObjectSize](#selectedobjectsize-property-pdfexplorer-component)
- [SelectedObjectValue](#selectedobjectvalue-property-pdfexplorer-component)

The array indices start at *0* and end at *SelectedObjectCount - 1*.

This property is read-only and not available at design time.

## Data Type

Integer

# SelectedObjectContainer Property ([PDFExplorer](#pdfexplorer-component) Component)

Whether the object is a container for other objects (i.

## Syntax

*C++ Builder Syntax*

```text
__property bool SelectedObjectContainer[int SelectedObjectIndex] = { read=FSelectedObjectContainer };
```

## Default Value

false

## Remarks

Whether the object is a container for other objects (i.e., a dictionary, array, or stream).

The *SelectedObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [SelectedObjectCount](#selectedobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

Boolean

# SelectedObjectDisposition Property ([PDFExplorer](#pdfexplorer-component) Component)

The method by which the object is addressed in the document.

## Syntax

*C++ Builder Syntax*

```text
__property TispPDFExplorerSelectedObjectDispositions SelectedObjectDisposition[int SelectedObjectIndex] = { read=FSelectedObjectDisposition };
enum TispPDFExplorerSelectedObjectDispositions {
  podDirect=0,
  podReference=1,
  podIndirect=2
};
```

## Default Value

podDirect

## Remarks

The method by which the object is addressed in the document.

Possible values are:

|  |  |
| --- | --- |
| 0 (podDirect - default) | The object is recorded in-place. |
| 1 (podReference) | The object is recorded as a reference to an indirect object. |
| 2 (podIndirect) | The object is an indirect object. |

**Example:**

```text
5 0 obj
<<
  /KeyM (Electricity)
>>

...

<<
  /KeyA (Some Value)
  /KeyB << /X /Y >>
  /KeyC 5 0 R
>>
```

- The value of */KeyA* (*Some Value*) is a direct string object.
- The value of */X* (*/Y*) is a direct name object.
- The value of */KeyB* is a direct dictionary object.
- The value of */KeyC* is a reference to the indirect dictionary object *5 0 obj*.
- The value of *5 0 obj* is an indirect dictionary object.

The *SelectedObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [SelectedObjectCount](#selectedobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

Integer

# SelectedObjectElementCount Property ([PDFExplorer](#pdfexplorer-component) Component)

The number of sub-elements in the object, such as keys in the dictionary or elements in the array.

## Syntax

*C++ Builder Syntax*

```text
__property int SelectedObjectElementCount[int SelectedObjectIndex] = { read=FSelectedObjectElementCount };
```

## Default Value

0

## Remarks

The number of sub-elements in the object, such as keys in the dictionary or elements in the array.

The *SelectedObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [SelectedObjectCount](#selectedobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

Integer

# SelectedObjectGenNumber Property ([PDFExplorer](#pdfexplorer-component) Component)

The generation number of the indirect (top-level) object.

## Syntax

*C++ Builder Syntax*

```text
__property int SelectedObjectGenNumber[int SelectedObjectIndex] = { read=FSelectedObjectGenNumber };
```

## Default Value

0

## Remarks

The generation number of the indirect (top-level) object.

The *SelectedObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [SelectedObjectCount](#selectedobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

Integer

# SelectedObjectKeys Property ([PDFExplorer](#pdfexplorer-component) Component)

A CRLF-separated list of the keys of the dictionary or indices of the array.

## Syntax

*C++ Builder Syntax*

```text
__property String SelectedObjectKeys[int SelectedObjectIndex] = { read=FSelectedObjectKeys };
```

## Default Value

""

## Remarks

A CRLF-separated list of the keys of the dictionary or indices of the array.

The *SelectedObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [SelectedObjectCount](#selectedobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

String

# SelectedObjectObjectNumber Property ([PDFExplorer](#pdfexplorer-component) Component)

The object number of the indirect (top-level) object.

## Syntax

*C++ Builder Syntax*

```text
__property int SelectedObjectObjectNumber[int SelectedObjectIndex] = { read=FSelectedObjectObjectNumber };
```

## Default Value

0

## Remarks

The object number of the indirect (top-level) object.

The *SelectedObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [SelectedObjectCount](#selectedobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

Integer

# SelectedObjectObjectType Property ([PDFExplorer](#pdfexplorer-component) Component)

The type of the object.

## Syntax

*C++ Builder Syntax*

```text
__property TispPDFExplorerSelectedObjectObjectTypes SelectedObjectObjectType[int SelectedObjectIndex] = { read=FSelectedObjectObjectType };
enum TispPDFExplorerSelectedObjectObjectTypes {
  potUndefined=0,
  potName=1,
  potString=2,
  potReal=3,
  potInteger=4,
  potBoolean=5,
  potArray=6,
  potDictionary=7,
  potStream=8
};
```

## Default Value

potUndefined

## Remarks

The type of the object.

Possible values are:

|  |  |
| --- | --- |
| 0 (potUndefined - default) | Undefined or unknown object type. |
| 1 (potName) | A name. |
| 2 (potString) | A string. |
| 3 (potReal) | A real number. |
| 4 (potInteger) | An integer number. |
| 5 (potBoolean) | A boolean value. |
| 6 (potArray) | An array. This object may have sub-objects. |
| 7 (potDictionary) | A dictionary. This object may have sub-objects. |
| 8 (potStream) | A data stream. |

The *SelectedObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [SelectedObjectCount](#selectedobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

Integer

# SelectedObjectOffset Property ([PDFExplorer](#pdfexplorer-component) Component)

The start offset of the object, in bytes, from the beginning of the PDF document.

## Syntax

*C++ Builder Syntax*

```text
__property __int64 SelectedObjectOffset[int SelectedObjectIndex] = { read=FSelectedObjectOffset };
```

## Default Value

0

## Remarks

The start offset of the object, in bytes, from the beginning of the PDF document.

The *SelectedObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [SelectedObjectCount](#selectedobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

Long64

# SelectedObjectPath Property ([PDFExplorer](#pdfexplorer-component) Component)

The path to the object, for example /Root/Pages .

## Syntax

*C++ Builder Syntax*

```text
__property String SelectedObjectPath[int SelectedObjectIndex] = { read=FSelectedObjectPath };
```

## Default Value

""

## Remarks

The path to the object, for example */Root/Pages*.

The *SelectedObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [SelectedObjectCount](#selectedobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

String

# SelectedObjectSize Property ([PDFExplorer](#pdfexplorer-component) Component)

The physical length of the object in bytes.

## Syntax

*C++ Builder Syntax*

```text
__property __int64 SelectedObjectSize[int SelectedObjectIndex] = { read=FSelectedObjectSize };
```

## Default Value

0

## Remarks

The physical length of the object in bytes.

The *SelectedObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [SelectedObjectCount](#selectedobjectcount-property-pdfexplorer-component) property.

This property is read-only and not available at design time.

## Data Type

Long64

# SelectedObjectValue Property ([PDFExplorer](#pdfexplorer-component) Component)

The value of the object.

## Syntax

*C++ Builder Syntax*

```text
__property String SelectedObjectValue[int SelectedObjectIndex] = { read=FSelectedObjectValue, write=FSetSelectedObjectValue };
```

## Default Value

""

## Remarks

The value of the object.

NOTE: This property only applies to primitive objects (strings, names, integers, reals, and booleans). To access and modify contents of complex objects such as streams, use [GetObjectData](#getobjectdata-method-pdfexplorer-component) and [SetObjectData](#setobjectdata-method-pdfexplorer-component).

The *SelectedObjectIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [SelectedObjectCount](#selectedobjectcount-property-pdfexplorer-component) property.

This property is not available at design time.

## Data Type

String

# AddContainer Method ([PDFExplorer](#pdfexplorer-component) Component)

Adds a dictionary or array object to the document.

## Syntax

*C++ Builder Syntax*

```text
String __fastcall AddContainer(String BasePath, String ObjectName, bool Dictionary, bool Indirect);
```

## Remarks

This method is used to add a new dictionary or array object to the document at *BasePath*. If adding to an existing dictionary, pass the key that the new object will be added or referenced under to *ObjectName*.

*Dictionary* specifies whether to create a dictionary object.

*Indirect* specifies whether to add the dictionary or array to the indirect (numbered) object list and reference it from *BasePath* instead of creating an in-place object.

This method returns the path to the new object in the document.

Please see [Navigating the Document](#navigating-the-document) for more details about object paths.

# AddObject Method ([PDFExplorer](#pdfexplorer-component) Component)

Inserts an object into the document.

## Syntax

*C++ Builder Syntax*

```text
String __fastcall AddObject(String BasePath, int ObjectType, String ObjectName, String Value, bool Indirect);
```

## Remarks

This method is used to add a new object with value *Value* to the document at *BasePath*. If adding to an existing dictionary, pass the key that the new object will be added or referenced under to *ObjectName*.

*ObjectType* specifies the type of the object. Possible values are:

|  |  |
| --- | --- |
| 0 (potUndefined - default) | Undefined or unknown object type. |
| 1 (potName) | A name. |
| 2 (potString) | A string. |
| 3 (potReal) | A real number. |
| 4 (potInteger) | An integer number. |
| 5 (potBoolean) | A boolean value. |
| 6 (potArray) | An array. This object may have sub-objects. |
| 7 (potDictionary) | A dictionary. This object may have sub-objects. |
| 8 (potStream) | A data stream. |

*Indirect* specifies whether to add the object to the indirect (numbered) object list and reference it from *BasePath* instead of creating an in-place object.

NOTE: This method can be particularly useful to add a primitive object (name, string, real, integer, or boolean) to the list of indirect (numbered) objects.

This method returns the path to the new object in the document.

Please see [Navigating the Document](#navigating-the-document) for more details about object paths.

# AddOpaque Method ([PDFExplorer](#pdfexplorer-component) Component)

Adds an opaque piece of PDF to the document.

## Syntax

*C++ Builder Syntax*

```text
String __fastcall AddOpaque(String BasePath, String ObjectName, String Value);
```

## Remarks

This method is used to add an uninterpreted string of PDF objects with value *Value* to the document at *BasePath*. If adding to an existing dictionary, pass the key that the new object will be added under to *ObjectName*.

**Example:**

```csharp
pdfexplorer.InputFile = "input.pdf";
pdfexplorer.OutputFile = "modified.pdf";
pdfexplorer.Open();

string value = "<< /Producer (Secure PDF)\r\n" +
               "/CreationDate (D:20250725102001Z00'00')\r\n" +
               "/ModDate (D:20250725102001Z00'00')\r\n" +
               "/Author (Edvard Grieg)\r\n" +
               "/Title (In the Hall of the Mountain King)\r\n" +
               ">>";
string path = pdfexplorer.AddOpaque("/", "Info", value);

pdfexplorer.Close();
```

 This method returns the path to the new object in the document.

Please see [Navigating the Document](#navigating-the-document) for more details about object paths.

# AddPrimitive Method ([PDFExplorer](#pdfexplorer-component) Component)

Adds a primitive object to the document.

## Syntax

*C++ Builder Syntax*

```text
String __fastcall AddPrimitive(String BasePath, String ObjectName, String Value);
```

## Remarks

This method is used to add a new name, string, real (double), integer, or boolean object with value *Value* to the document at *BasePath*. If adding to an existing dictionary, pass the key that the new object will be added under to *ObjectName*.

The component automatically determines the type of the object based on the *Value* parameter.

**Examples:**

```csharp
pdfexplorer.InputFile = "input.pdf";
pdfexplorer.OutputFile = "modified.pdf";
pdfexplorer.Open();

// Adding a name object to the dictionary at 3 0 obj
string namePath = pdfexplorer.AddPrimitive("3 0 obj", "Type", "/Font");

// Adding a string object to the dictionary at 1 0 obj
string stringPath = pdfexplorer.AddPrimitive("1 0 obj", "Name", "John Doe");

// Adding a real object to an array
string realPath = pdfexplorer.AddPrimitive("5 0 obj/Rect", "", "100.5");

// Adding an integer object to an array
string integerPath = pdfexplorer.AddPrimitive("/Root/Pages/Kids[0]/MediaBox", "", "792");

// Adding a boolean object to a dictionary
string booleanPath = pdfexplorer.AddPrimitive("/Root/AcroForm", "NeedAppearances", "true");

pdfexplorer.Close();
```

 This method returns the path to the new object in the document.

Please see [Navigating the Document](#navigating-the-document) for more details about object paths.

# AddReference Method ([PDFExplorer](#pdfexplorer-component) Component)

Adds an object reference to the document.

## Syntax

*C++ Builder Syntax*

```text
String __fastcall AddReference(String BasePath, String ObjectName, String RefPath);
```

## Remarks

This method is used to create a new reference to an existing object, such as a page dictionary, at *BasePath*. If adding to an existing dictionary, pass the key that the new reference will be added under to *ObjectName*.

*RefPath* specifies the destination object and must point to one of the indirect (numbered) objects.

This method returns the path to the new object in the document.

Please see [Navigating the Document](#navigating-the-document) for more details about object paths.

# AddStream Method ([PDFExplorer](#pdfexplorer-component) Component)

Adds a stream object to the document.

## Syntax

*C++ Builder Syntax*

```text
String __fastcall AddStream(String BasePath, String ObjectName, DynamicArray<Byte> Value);
```

## Remarks

This method is used to create a new stream object with value *Value* at *BasePath*. If adding to an existing dictionary, pass the key that the new stream will be referenced under to *ObjectName*.

NOTE: Stream objects are always indirect (i.e., part of the numbered object list).

This method returns the path to the new object in the document.

Please see [Navigating the Document](#navigating-the-document) for more details about object paths.

# Close Method ([PDFExplorer](#pdfexplorer-component) Component)

Closes the opened document.

## Syntax

*C++ Builder Syntax*

```text
void __fastcall Close();
```

## Remarks

This method is used to close the previously opened document. It should always be preceded by a call to [Open](#open-method-pdfexplorer-component).

**Example:**

```csharp
component.InputFile = "input.pdf";
component.Open();
// Some operation
component.Close();
```

 If any changes are made to the document, they are saved automatically to [OutputFile](#outputfile-property-pdfexplorer-component), [OutputData](#outputdata-property-pdfexplorer-component), or the stream set in SetOutputStream when this method is called. To configure this saving behavior, set [SaveChanges](#SaveChanges).

# Config Method ([PDFExplorer](#pdfexplorer-component) Component)

Sets or retrieves a configuration setting.

## Syntax

*C++ Builder Syntax*

```text
String __fastcall Config(String ConfigurationString);
```

## Remarks

Config is a generic method available in every component. It is used to set and retrieve [configuration settings](#config-settings-pdfexplorer-component) for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these *internal properties* is provided through the Config method.

To set a configuration setting named *PROPERTY*, you must call *Config("PROPERTY=VALUE")*, where *VALUE* is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a [configuration setting](#config-settings-pdfexplorer-component), you must call *Config("PROPERTY")*. The value will be returned as a string.

# CreateNew Method ([PDFExplorer](#pdfexplorer-component) Component)

Creates a new PDF document.

## Syntax

*C++ Builder Syntax*

```text
void __fastcall CreateNew();
```

## Remarks

This method is used to create a blank PDF document with one empty page. Having created the baseline document, use the component's methods (such as [AddStream](#addstream-method-pdfexplorer-component)) to add objects to it.

# GetObjectData Method ([PDFExplorer](#pdfexplorer-component) Component)

Returns the content of a stream object.

## Syntax

*C++ Builder Syntax*

```text
DynamicArray<Byte> __fastcall GetObjectData(String Path);
```

## Remarks

This method is used to retrieve the content of the PDF stream object at *Path*.

Please see [Navigating the Document](#navigating-the-document) for more details about object paths.

# Open Method ([PDFExplorer](#pdfexplorer-component) Component)

Opens the document for processing.

## Syntax

*C++ Builder Syntax*

```text
void __fastcall Open();
```

## Remarks

This method is used to open the document specified in [InputFile](#inputfile-property-pdfexplorer-component), [InputData](#inputdata-property-pdfexplorer-component), or SetInputStream before performing some operation on it, such as accessing or modifying individual PDF objects. When finished, call [Close](#close-method-pdfexplorer-component) to complete or discard the operation.

It is recommended to use this method (alongside [Close](#close-method-pdfexplorer-component)) when performing multiple operations on the document at once.

NOTE: This method populates the RootObjects properties with the keys found in the document trailer dictionary.

# RemoveObject Method ([PDFExplorer](#pdfexplorer-component) Component)

Removes an object from the document.

## Syntax

*C++ Builder Syntax*

```text
void __fastcall RemoveObject(String Path);
```

## Remarks

This method is used to remove the object at *Path* from the document.

Note the following peculiarities of the PDF format:

- Certain objects ("indirect objects") are global, numbered objects that can be referenced from other objects in the document. To remove an indirect object, all the references to it must be removed first, followed by the object itself.
- Indirect objects may have more than one reference. Removing such an object may inadvertently invalidate other references in the document.

 Please see [Navigating the Document](#navigating-the-document) for more details about object paths.

# Reset Method ([PDFExplorer](#pdfexplorer-component) Component)

Resets the component.

## Syntax

*C++ Builder Syntax*

```text
void __fastcall Reset();
```

## Remarks

This method is used to reset the component's properties and configuration settings to their default values.

# Select Method ([PDFExplorer](#pdfexplorer-component) Component)

Selects an object or multiple objects from the document.

## Syntax

*C++ Builder Syntax*

```text
void __fastcall Select(String Filter, bool ClearExistingSelection);
```

## Remarks

This method is used to select objects from the document using an XPath-like language. Upon completion of this method, objects with paths matching *Filter* will be populated in the SelectedObjects properties.

*ClearExistingSelection* specifies whether SelectedObjects will be cleared before performing the select operation.

NOTE: Since streams are compound objects consisting of a dictionary and data, when selecting a stream object this method selects its dictionary. Use [GetObjectData](#getobjectdata-method-pdfexplorer-component) or GetObjectStream to extract the content of stream objects.

Please see [Navigating the Document](#navigating-the-document) for more details about object paths.

# SetObjectData Method ([PDFExplorer](#pdfexplorer-component) Component)

Sets the content of a stream object.

## Syntax

*C++ Builder Syntax*

```text
void __fastcall SetObjectData(String Path, DynamicArray<Byte> Value);
```

## Remarks

This method is used to set the content of the PDF stream object at *Path*. *Value* specifies the data of the stream.

Please see [Navigating the Document](#navigating-the-document) for more details about object paths.

# Error Event ([PDFExplorer](#pdfexplorer-component) Component)

Fired when information is available about errors during data delivery.

## Syntax

*C++ Builder Syntax*

```text
typedef struct {
  int ErrorCode;
  String Description;
} TispPDFExplorerErrorEventParams;
typedef void __fastcall (__closure *TispPDFExplorerErrorEvent)(System::TObject* Sender, TispPDFExplorerErrorEventParams *e);
__property TispPDFExplorerErrorEvent OnError = { read=FOnError, write=FOnError };
```

## Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.

The *ErrorCode* parameter contains an error code, and the *Description* parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the [Error Codes](#trappable-errors-pdfexplorer-component) section.

# Log Event ([PDFExplorer](#pdfexplorer-component) Component)

Fired once for each log message.

## Syntax

*C++ Builder Syntax*

```text
typedef struct {
  int LogLevel;
  String Message;
  String LogType;
} TispPDFExplorerLogEventParams;
typedef void __fastcall (__closure *TispPDFExplorerLogEvent)(System::TObject* Sender, TispPDFExplorerLogEventParams *e);
__property TispPDFExplorerLogEvent OnLog = { read=FOnLog, write=FOnLog };
```

## Remarks

This event is fired once for each log message generated by the component. The verbosity is controlled by the [LogLevel](#LogLevel) configuration setting.

*LogLevel* indicates the detail level of the message. Possible values are:

|  |  |
| --- | --- |
| 0 (None) | No messages are logged. |
| 1 (Info - default) | Informational events such as the basics of the chain validation procedure are logged. |
| 2 (Verbose) | Detailed data such as HTTP requests are logged. |
| 3 (Debug) | Debug data including the full chain validation procedure are logged. |

*Message* is the log message.

*LogType* identifies the type of log entry. Possible values are:

- CertValidator
- Font
- HTTP
- PDFInvalidSignature
- PDFRevocationInfo
- Timestamp
- TSL

# Config Settings ([PDFExplorer](#pdfexplorer-component) Component)

 The component accepts one or more of the following *configuration settings*. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these *internal properties* is provided through the [Config](#config-method-pdfexplorer-component) method.

### PDFExplorer Config Settings

**CloseInputStreamAfterProcessing**: Whether to close the input stream after processing.This setting determines whether the input stream specified in SetInputStream will be closed after processing is complete. The default value is *true*.

**CloseOutputStreamAfterProcessing**: Whether to close the output stream after processing.This setting determines whether the output stream specified in SetOutputStream will be closed after processing is complete. The default value is *true*.

**LogLevel**: The level of detail that is logged.This setting controls the level of detail that is logged through the [Log](#log-event-pdfexplorer-component) event. Possible values are:

|  |  |
| --- | --- |
| 0 (None) | No messages are logged. |
| 1 (Info - default) | Informational events such as the basics of the chain validation procedure are logged. |
| 2 (Verbose) | Detailed data such as HTTP requests are logged. |
| 3 (Debug) | Debug data including the full chain validation procedure are logged. |

**SaveChanges**: Whether to save changes made to the document.This setting specifies whether and how changes made to the PDF document are saved when [Close](#close-method-pdfexplorer-component) is called. Possible values are:

|  |  |
| --- | --- |
| 0 | Discard all changes. |
| 1 | Save the document to [OutputFile](#outputfile-property-pdfexplorer-component), [OutputData](#outputdata-property-pdfexplorer-component), or the stream set in SetOutputStream, even if it has not been modified. |
| 2 (default) | Save the document to [OutputFile](#outputfile-property-pdfexplorer-component), [OutputData](#outputdata-property-pdfexplorer-component), or the stream set in SetOutputStream, but only if it has been modified. |

**StringEncoding**: The encoding to use for string objects.This setting specifies how the component encodes strings when processing string objects. Possible values are:

|  |  |
| --- | --- |
| Auto (default) | Encode the string as a hex string if no human-readable text is identified; otherwise, encode it as a literal string. |
| Hex | Encode the string as a hex string (e.g., hex:48656C6C6F20776F726C6421). |
| Binary | Encode the string as a literal string, converting to human-readable text when possible (e.g., Hello world!). |

**TempPath**: The location where temporary files are stored.This setting specifies an absolute path to the location on disk where temporary files are stored. It can be useful to reduce memory usage.

### Base Config Settings

**BuildInfo**: Information about the product's build.When queried, this setting will return a string containing information about the product's build.

**CodePage**: The system code page used for Unicode to Multibyte translations.The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:

|  |  |
| --- | --- |
| Identifier | Name |
| 037 | IBM EBCDIC - U.S./Canada |
| 437 | OEM - United States |
| 500 | IBM EBCDIC - International |
| 708 | Arabic - ASMO 708 |
| 709 | Arabic - ASMO 449+, BCON V4 |
| 710 | Arabic - Transparent Arabic |
| 720 | Arabic - Transparent ASMO |
| 737 | OEM - Greek (formerly 437G) |
| 775 | OEM - Baltic |
| 850 | OEM - Multilingual Latin I |
| 852 | OEM - Latin II |
| 855 | OEM - Cyrillic (primarily Russian) |
| 857 | OEM - Turkish |
| 858 | OEM - Multilingual Latin I + Euro symbol |
| 860 | OEM - Portuguese |
| 861 | OEM - Icelandic |
| 862 | OEM - Hebrew |
| 863 | OEM - Canadian-French |
| 864 | OEM - Arabic |
| 865 | OEM - Nordic |
| 866 | OEM - Russian |
| 869 | OEM - Modern Greek |
| 870 | IBM EBCDIC - Multilingual/ROECE (Latin-2) |
| 874 | ANSI/OEM - Thai (same as 28605, ISO 8859-15) |
| 875 | IBM EBCDIC - Modern Greek |
| 932 | ANSI/OEM - Japanese, Shift-JIS |
| 936 | ANSI/OEM - Simplified Chinese (PRC, Singapore) |
| 949 | ANSI/OEM - Korean (Unified Hangul Code) |
| 950 | ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC) |
| 1026 | IBM EBCDIC - Turkish (Latin-5) |
| 1047 | IBM EBCDIC - Latin 1/Open System |
| 1140 | IBM EBCDIC - U.S./Canada (037 + Euro symbol) |
| 1141 | IBM EBCDIC - Germany (20273 + Euro symbol) |
| 1142 | IBM EBCDIC - Denmark/Norway (20277 + Euro symbol) |
| 1143 | IBM EBCDIC - Finland/Sweden (20278 + Euro symbol) |
| 1144 | IBM EBCDIC - Italy (20280 + Euro symbol) |
| 1145 | IBM EBCDIC - Latin America/Spain (20284 + Euro symbol) |
| 1146 | IBM EBCDIC - United Kingdom (20285 + Euro symbol) |
| 1147 | IBM EBCDIC - France (20297 + Euro symbol) |
| 1148 | IBM EBCDIC - International (500 + Euro symbol) |
| 1149 | IBM EBCDIC - Icelandic (20871 + Euro symbol) |
| 1200 | Unicode UCS-2 Little-Endian (BMP of ISO 10646) |
| 1201 | Unicode UCS-2 Big-Endian |
| 1250 | ANSI - Central European |
| 1251 | ANSI - Cyrillic |
| 1252 | ANSI - Latin I |
| 1253 | ANSI - Greek |
| 1254 | ANSI - Turkish |
| 1255 | ANSI - Hebrew |
| 1256 | ANSI - Arabic |
| 1257 | ANSI - Baltic |
| 1258 | ANSI/OEM - Vietnamese |
| 1361 | Korean (Johab) |
| 10000 | MAC - Roman |
| 10001 | MAC - Japanese |
| 10002 | MAC - Traditional Chinese (Big5) |
| 10003 | MAC - Korean |
| 10004 | MAC - Arabic |
| 10005 | MAC - Hebrew |
| 10006 | MAC - Greek I |
| 10007 | MAC - Cyrillic |
| 10008 | MAC - Simplified Chinese (GB 2312) |
| 10010 | MAC - Romania |
| 10017 | MAC - Ukraine |
| 10021 | MAC - Thai |
| 10029 | MAC - Latin II |
| 10079 | MAC - Icelandic |
| 10081 | MAC - Turkish |
| 10082 | MAC - Croatia |
| 12000 | Unicode UCS-4 Little-Endian |
| 12001 | Unicode UCS-4 Big-Endian |
| 20000 | CNS - Taiwan |
| 20001 | TCA - Taiwan |
| 20002 | Eten - Taiwan |
| 20003 | IBM5550 - Taiwan |
| 20004 | TeleText - Taiwan |
| 20005 | Wang - Taiwan |
| 20105 | IA5 IRV International Alphabet No. 5 (7-bit) |
| 20106 | IA5 German (7-bit) |
| 20107 | IA5 Swedish (7-bit) |
| 20108 | IA5 Norwegian (7-bit) |
| 20127 | US-ASCII (7-bit) |
| 20261 | T.61 |
| 20269 | ISO 6937 Non-Spacing Accent |
| 20273 | IBM EBCDIC - Germany |
| 20277 | IBM EBCDIC - Denmark/Norway |
| 20278 | IBM EBCDIC - Finland/Sweden |
| 20280 | IBM EBCDIC - Italy |
| 20284 | IBM EBCDIC - Latin America/Spain |
| 20285 | IBM EBCDIC - United Kingdom |
| 20290 | IBM EBCDIC - Japanese Katakana Extended |
| 20297 | IBM EBCDIC - France |
| 20420 | IBM EBCDIC - Arabic |
| 20423 | IBM EBCDIC - Greek |
| 20424 | IBM EBCDIC - Hebrew |
| 20833 | IBM EBCDIC - Korean Extended |
| 20838 | IBM EBCDIC - Thai |
| 20866 | Russian - KOI8-R |
| 20871 | IBM EBCDIC - Icelandic |
| 20880 | IBM EBCDIC - Cyrillic (Russian) |
| 20905 | IBM EBCDIC - Turkish |
| 20924 | IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol) |
| 20932 | JIS X 0208-1990 & 0121-1990 |
| 20936 | Simplified Chinese (GB2312) |
| 21025 | IBM EBCDIC - Cyrillic (Serbian, Bulgarian) |
| 21027 | Extended Alpha Lowercase |
| 21866 | Ukrainian (KOI8-U) |
| 28591 | ISO 8859-1 Latin I |
| 28592 | ISO 8859-2 Central Europe |
| 28593 | ISO 8859-3 Latin 3 |
| 28594 | ISO 8859-4 Baltic |
| 28595 | ISO 8859-5 Cyrillic |
| 28596 | ISO 8859-6 Arabic |
| 28597 | ISO 8859-7 Greek |
| 28598 | ISO 8859-8 Hebrew |
| 28599 | ISO 8859-9 Latin 5 |
| 28605 | ISO 8859-15 Latin 9 |
| 29001 | Europa 3 |
| 38598 | ISO 8859-8 Hebrew |
| 50220 | ISO 2022 Japanese with no halfwidth Katakana |
| 50221 | ISO 2022 Japanese with halfwidth Katakana |
| 50222 | ISO 2022 Japanese JIS X 0201-1989 |
| 50225 | ISO 2022 Korean |
| 50227 | ISO 2022 Simplified Chinese |
| 50229 | ISO 2022 Traditional Chinese |
| 50930 | Japanese (Katakana) Extended |
| 50931 | US/Canada and Japanese |
| 50933 | Korean Extended and Korean |
| 50935 | Simplified Chinese Extended and Simplified Chinese |
| 50936 | Simplified Chinese |
| 50937 | US/Canada and Traditional Chinese |
| 50939 | Japanese (Latin) Extended and Japanese |
| 51932 | EUC - Japanese |
| 51936 | EUC - Simplified Chinese |
| 51949 | EUC - Korean |
| 51950 | EUC - Traditional Chinese |
| 52936 | HZ-GB2312 Simplified Chinese |
| 54936 | Windows XP: GB18030 Simplified Chinese (4 Byte) |
| 57002 | ISCII Devanagari |
| 57003 | ISCII Bengali |
| 57004 | ISCII Tamil |
| 57005 | ISCII Telugu |
| 57006 | ISCII Assamese |
| 57007 | ISCII Oriya |
| 57008 | ISCII Kannada |
| 57009 | ISCII Malayalam |
| 57010 | ISCII Gujarati |
| 57011 | ISCII Punjabi |
| 65000 | Unicode UTF-7 |
| 65001 | Unicode UTF-8 |

 The following is a list of valid code page identifiers for Mac OS only:

|  |  |
| --- | --- |
| Identifier | Name |
| 1 | ASCII |
| 2 | NEXTSTEP |
| 3 | JapaneseEUC |
| 4 | UTF8 |
| 5 | ISOLatin1 |
| 6 | Symbol |
| 7 | NonLossyASCII |
| 8 | ShiftJIS |
| 9 | ISOLatin2 |
| 10 | Unicode |
| 11 | WindowsCP1251 |
| 12 | WindowsCP1252 |
| 13 | WindowsCP1253 |
| 14 | WindowsCP1254 |
| 15 | WindowsCP1250 |
| 21 | ISO2022JP |
| 30 | MacOSRoman |
| 10 | UTF16String |
| 0x90000100 | UTF16BigEndian |
| 0x94000100 | UTF16LittleEndian |
| 0x8c000100 | UTF32String |
| 0x98000100 | UTF32BigEndian |
| 0x9c000100 | UTF32LittleEndian |
| 65536 | Proprietary |

**LicenseInfo**: Information about the current license.When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

- Product: The product the license is for.
- Product Key: The key the license was generated from.
- License Source: Where the license was found (e.g., RuntimeLicense, License File).
- License Type: The type of license installed (e.g., Royalty Free, Single Server).
- Last Valid Build: The last valid build number for which the license will work.

**MaskSensitiveData**: Whether sensitive data is masked in log messages.In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to *true* to mask sensitive data. The default is *true*.

**UseInternalSecurityAPI**: Whether or not to use the system security libraries or an internal implementation. When set to *false*, the component will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to *true* tells the component to use the internal implementation instead of using the system security libraries.

 This setting is set to *false* by default on all platforms.

# Trappable Errors ([PDFExplorer](#pdfexplorer-component) Component)

### PDFExplorer Errors

|  |  |
| --- | --- |
| 1301 | Invalid path. |
| 1302 | Unsupported object type. |
| 1304 | Object with this name already exists. |
| 1307 | Cannot add direct object to root. |
| 1308 | Cannot add reference to root. |

### PDF Errors

|  |  |
| --- | --- |
| 804 | PDF decompression failed. |
| 805 | Cannot add entry to cross-reference table. |
| 806 | Unsupported field size. |
| 807 | Unsupported Encoding filter. |
| 808 | Unsupported predictor algorithm. |
| 809 | Unsupported document version. |
| 812 | Cannot read PDF file stream. |
| 813 | Cannot write to PDF file stream. |
| 814 | [OutputFile](#outputfile-property-pdfexplorer-component) already exists and [Overwrite](#overwrite-property-pdfexplorer-component) is false. |
| 815 | Invalid parameter. |
| 817 | Bad cross-reference entry. |
| 818 | Invalid object or generation number. |
| 819 | Invalid object stream. |
| 820 | Invalid stream dictionary. |
| 821 | Invalid AcroForm entry. |
| 822 | Invalid Root entry. |
| 823 | Invalid annotation. |
| 824 | The input document is empty. |
| 826 | OpenType font error. The error description contains the detailed message. |
| 828 | Invalid CMS data. The error description contains the detailed message. |
| 835 | Cannot change decryption mode for opened document. |
| 836 | Unsupported Date string. |
| 838 | Cryptographic error. The error description contains the detailed message. |
| 840 | DecryptionCert error. The error description contains the detailed message. |
| 841 | Encryption failed. The error description contains the detailed message. |
| 842 | No proper certificate for encryption found. |
| 846 | Unsupported revision. |
| 847 | Unsupported security handler SubFilter. |
| 848 | Failed to verify permissions. |
| 849 | Invalid password. |
| 850 | Invalid password information. |
| 852 | Unsupported encryption algorithm. |
| 859 | Cannot encrypt encrypted document. |
| 864 | Cannot modify document after signature update. |
| 868 | Cannot encrypt or decrypt object. |
| 869 | Invalid security handler information. |
| 870 | Invalid encrypted data. |
| 871 | Invalid block cipher padding. |
| 872 | Failed to reload signature. |
| 873 | Object is not encrypted. |
| 874 | Unexpected cipher information. |
| 877 | Invalid document. Bad document catalog. |
| 878 | Invalid document Id. |
| 880 | Invalid document. Invalid requirements dictionary. |
| 881 | Invalid linearization dictionary. |
| 882 | Invalid signature information. |
| 883 | Unsupported document format. |
| 890 | Unsupported feature. |
| 891 | Internal error. The error description contains the detailed message. |
| 892 | Unsupported color. |
| 893 | This operation is not supported for this PDF/A level. |
| 894 | Interactive features ([](#f_Action)) are not supported by PDF/A. Set [EnforcePDFA](#EnforcePDFA) to false or clear the [](#f_Action) property of the field. |
| 895 | Font file not found. |

### Parsing Errors

|  |  |
| --- | --- |
| 1001 | Bad object. |
| 1002 | Bad document trailer. |
| 1003 | Illegal stream dictionary. |
| 1004 | Illegal string. |
| 1005 | Indirect object expected. |
| 1007 | Invalid reference. |
| 1008 | Invalid reference table. |
| 1009 | Invalid stream data. |
| 1010 | Unexpected character. |
| 1011 | Unexpected EOF. |
| 1012 | Unexpected indirect object in cross-reference table. |
| 1013 | RDF object not found. |
| 1014 | Invalid RDF object. |
| 1015 | Cannot create element with unknown prefix. |
| 1021 | Invalid type in Root object list. |