# NTLM Component

The NTLM component provides a simple API to create the required tokens for NTLM authentication.

## Syntax

```text
nsoftware.IPWorksAuth.NTLM
```

## Remarks

This component provides a simple API to create the required tokens for NTLM authentication.

The NTLM authentication process is a challenge-response scheme which consists of three messages. These three messages are the negotiation, challenge, and authentication. This component implements only the client side of NTLM and will create the negotiation and authentication tokens. The component does not transmit any data, it simply prepares the tokens for use in other transport protocols such as HTTP. The following steps describe how the component is used.

**Create the Negotiate Token**

To begin first set [User](#user-property-ntlm-component) and [Password](#password-property-ntlm-component). The user value may contain domain information in the format "DOMAIN\User" or "user@domain". Next call [CreateNegotiateToken](#createnegotiatetoken-method-ntlm-component) to populate [NegotiateToken](#negotiatetoken-property-ntlm-component). This token may then be transmitted separately. For instance in HTTP this would be sent in a request within the Authorization header:

```text
HTTPHeader = "Authorization: NTLM " + NegotiateToken
```

**Create the Auth Token**

After sending the negotiate token over the chosen transport protocol, the server will respond with a challenge token. Set [ChallengeToken](#challengetoken-property-ntlm-component) to the token received from the server. For instance, in HTTP the server will respond with the challenge token in the WWW-Authenticate header:

```text
WWW-Authenticate: NTLM <ChallengeToken>
```

 After setting [User](#user-property-ntlm-component), [Password](#password-property-ntlm-component), and [ChallengeToken](#challengetoken-property-ntlm-component) call [CreateAuthToken](#createauthtoken-method-ntlm-component). This will populate [AuthToken](#authtoken-property-ntlm-component) with the created token. This token may then be transmitted separately. For instance in HTTP this would be sent in the request within the Authorization header:

```text
HTTPHeader = "Authorization: NTLM " + AuthToken
```

NOTE: If the server requires EPA (Extended Protection for Authentication), then [SSLServerCert](#sslservercert-property-ntlm-component) must be set to the server's public certificate before calling [CreateAuthToken](#createauthtoken-method-ntlm-component).

## Property List

*The following is the full list of the properties of the component with short descriptions. Click on the links for further details.*

|  |  |
| --- | --- |
| [AuthToken](#authtoken-property-ntlm-component) | The authentication token. |
| [ChallengeToken](#challengetoken-property-ntlm-component) | The challenge token. |
| [NegotiateToken](#negotiatetoken-property-ntlm-component) | The negotiate token. |
| [NTLMVersion](#ntlmversion-property-ntlm-component) | The NTLM version. |
| [Password](#password-property-ntlm-component) | The user's password. |
| [SSLServerCert](#sslservercert-property-ntlm-component) | The server's public certificate. |
| [User](#user-property-ntlm-component) | The user. |

## Method List

*The following is the full list of the methods of the component with short descriptions. Click on the links for further details.*

|  |  |
| --- | --- |
| [Config](#config-method-ntlm-component) | Sets or retrieves a configuration setting. |
| [CreateAuthToken](#createauthtoken-method-ntlm-component) | Creates the authentication token. |
| [CreateNegotiateToken](#createnegotiatetoken-method-ntlm-component) | Creates the negotiate token. |
| [Reset](#reset-method-ntlm-component) | Resets the component |

## Event List

*The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.*

|  |  |
| --- | --- |
| [Error](#error-event-ntlm-component) | Fired when information is available about errors during data delivery. |

## Config Settings

*The following is a list of config settings for the component with short descriptions. Click on the links for further details.*

|  |  |
| --- | --- |
| [DecodeToken](#DecodeToken) | Whether to Base64 encode the token. |
| [EncodeToken](#EncodeToken) | Whether to Base64 encode the token. |
| [UsePlatformNTLMAPI](#UsePlatformNTLMAPI) | Whether to use the platform NTLM API. |
| [Workstation](#Workstation) | The workstation name. |
| [BuildInfo](#BuildInfo) | Information about the product's build. |
| [GUIAvailable](#GUIAvailable) | Whether or not a message loop is available for processing events. |
| [LicenseInfo](#LicenseInfo) | Information about the current license. |
| [MaskSensitiveData](#MaskSensitiveData) | Whether sensitive data is masked in log messages. |
| [UseFIPSCompliantAPI](#UseFIPSCompliantAPI) | Tells the component whether or not to use FIPS certified APIs. |
| [UseInternalSecurityAPI](#UseInternalSecurityAPI) | Whether or not to use the system security libraries or an internal implementation. |

# AuthToken Property ([NTLM](#ntlm-component) Component)

The authentication token.

## Syntax

```text
public string AuthToken { get; }
public byte[] AuthTokenB { get; }
```

## Default Value

""

## Remarks

This property holds the created authentication token. This property is populated after calling [CreateAuthToken](#createauthtoken-method-ntlm-component).

Note: By default this value is Base64 encoded. Set [EncodeToken](#EncodeToken) to False before calling [CreateAuthToken](#createauthtoken-method-ntlm-component) to obtain the raw value.

This property is read-only.

# ChallengeToken Property ([NTLM](#ntlm-component) Component)

The challenge token.

## Syntax

```text
public string ChallengeToken { get; set; }
public byte[] ChallengeTokenB { get; set; }
```

## Default Value

""

## Remarks

This property specifies the challenge token. This must be set to the challenge token received from the server before calling [CreateAuthToken](#createauthtoken-method-ntlm-component).

Note: By default the component expects the token to be Base64 encoded. To provide a raw value to this property first set [DecodeToken](#DecodeToken) to False.

# NegotiateToken Property ([NTLM](#ntlm-component) Component)

The negotiate token.

## Syntax

```text
public string NegotiateToken { get; }
public byte[] NegotiateTokenB { get; }
```

## Default Value

""

## Remarks

This property is populated after calling [CreateNegotiateToken](#createnegotiatetoken-method-ntlm-component). By default the value is Base64 encoded. To obtain the raw value set [EncodeToken](#EncodeToken) to False before calling [CreateNegotiateToken](#createnegotiatetoken-method-ntlm-component).

This property is read-only.

# NTLMVersion Property ([NTLM](#ntlm-component) Component)

The NTLM version.

## Syntax

```text
public NTLMNTLMVersions NTLMVersion { get; set; }
enum NTLMNTLMVersions {
  ntNTLMv1,
  ntNTLMv2
}
```

## Default Value

1

## Remarks

This property specifies the NTLM version to use. Possible values are:

- 1 (ntNTLMv1 - default)
- 2 (ntNTLMv2)

Note: If the server requires EPA (Extended Protection for Authentication) this property must be set to 2 (ntNTLMv2).

# Password Property ([NTLM](#ntlm-component) Component)

The user's password.

## Syntax

```text
public string Password { get; set; }
```

## Default Value

""

## Remarks

This property specifies the user's password.

# SSLServerCert Property ([NTLM](#ntlm-component) Component)

The server's public certificate.

## Syntax

```text
public Certificate SSLServerCert { get; set; }
```

## Remarks

This property specifies the server's public certificate. This must be set if the server requires EPA (Extended Protection for Authentication).

 Please refer to the [Certificate](#certificate-type) type for a complete list of fields.

# User Property ([NTLM](#ntlm-component) Component)

The user.

## Syntax

```text
public string User { get; set; }
```

## Default Value

""

## Remarks

This property specifies the name and realm/domain of the user. The value specified must be in one of the following formats:

- user
- domain/user

# Config Method ([NTLM](#ntlm-component) Component)

Sets or retrieves a configuration setting.

## Syntax

```text
public string Config(string configurationString);

Async Version
public async Task<string> Config(string configurationString);
public async Task<string> Config(string configurationString, CancellationToken cancellationToken);
```

## Remarks

Config is a generic method available in every component. It is used to set and retrieve [configuration settings](#config-settings-ntlm-component) for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these *internal properties* is provided through the Config method.

To set a configuration setting named *PROPERTY*, you must call *Config("PROPERTY=VALUE")*, where *VALUE* is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a [configuration setting](#config-settings-ntlm-component), you must call *Config("PROPERTY")*. The value will be returned as a string.

# CreateAuthToken Method ([NTLM](#ntlm-component) Component)

Creates the authentication token.

## Syntax

```text
public void CreateAuthToken();

Async Version
public async Task CreateAuthToken();
public async Task CreateAuthToken(CancellationToken cancellationToken);
```

## Remarks

This method creates the authentication token. After calling this method the [AuthToken](#authtoken-property-ntlm-component) property will be populated. The following properties are applicable when calling this method:

- [User](#user-property-ntlm-component) (required)
- [Password](#password-property-ntlm-component) (required)
- [ChallengeToken](#challengetoken-property-ntlm-component) (required)
- [SSLServerCert](#sslservercert-property-ntlm-component)
- [NTLMVersion](#ntlmversion-property-ntlm-component)

Note: [SSLServerCert](#sslservercert-property-ntlm-component) must be set to the server's public certificate if the server requires EPA (Extended Protection for Authentication).

# CreateNegotiateToken Method ([NTLM](#ntlm-component) Component)

Creates the negotiate token.

## Syntax

```text
public void CreateNegotiateToken();

Async Version
public async Task CreateNegotiateToken();
public async Task CreateNegotiateToken(CancellationToken cancellationToken);
```

## Remarks

This method creates the negotiate token. After calling this method the [NegotiateToken](#negotiatetoken-property-ntlm-component) property is populated. The following properties are applicable when calling this method:

- [User](#user-property-ntlm-component) (required)
- [Password](#password-property-ntlm-component) (required)
- [NTLMVersion](#ntlmversion-property-ntlm-component)

# Reset Method ([NTLM](#ntlm-component) Component)

Resets the component

## Syntax

```text
public void Reset();

Async Version
public async Task Reset();
public async Task Reset(CancellationToken cancellationToken);
```

## Remarks

When called, the component will reset all of its properties to their default values.

# Error Event ([NTLM](#ntlm-component) Component)

Fired when information is available about errors during data delivery.

## Syntax

```text
public event OnErrorHandler OnError;

public delegate void OnErrorHandler(object sender, NTLMErrorEventArgs e);

public class NTLMErrorEventArgs : EventArgs {
  public int ErrorCode { get; }
  public string Description { get; }
}
```

## Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component throws an exception.

The *ErrorCode* parameter contains an error code, and the *Description* parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the [Error Codes](#trappable-errors-ntlm-component) section.

# Certificate Type

This is the digital certificate being used.

## Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

The following fields are available:

- [EffectiveDate](#Certificate_f_EffectiveDate)

- [ExpirationDate](#Certificate_f_ExpirationDate)

- [ExtendedKeyUsage](#Certificate_f_ExtendedKeyUsage)

- [Fingerprint](#Certificate_f_Fingerprint)

- [FingerprintSHA1](#Certificate_f_FingerprintSHA1)

- [FingerprintSHA256](#Certificate_f_FingerprintSHA256)

- [Issuer](#Certificate_f_Issuer)

- [PrivateKey](#Certificate_f_PrivateKey)

- [PrivateKeyAvailable](#Certificate_f_PrivateKeyAvailable)

- [PrivateKeyContainer](#Certificate_f_PrivateKeyContainer)

- [PublicKey](#Certificate_f_PublicKey)

- [PublicKeyAlgorithm](#Certificate_f_PublicKeyAlgorithm)

- [PublicKeyLength](#Certificate_f_PublicKeyLength)

- [SerialNumber](#Certificate_f_SerialNumber)

- [SignatureAlgorithm](#Certificate_f_SignatureAlgorithm)

- [Store](#Certificate_f_Store)

- [StorePassword](#Certificate_f_StorePassword)

- [StoreType](#Certificate_f_StoreType)

- [SubjectAltNames](#Certificate_f_SubjectAltNames)

- [ThumbprintMD5](#Certificate_f_ThumbprintMD5)

- [ThumbprintSHA1](#Certificate_f_ThumbprintSHA1)

- [ThumbprintSHA256](#Certificate_f_ThumbprintSHA256)

- [Usage](#Certificate_f_Usage)

- [UsageFlags](#Certificate_f_UsageFlags)

- [Version](#Certificate_f_Version)

- [Subject](#Certificate_f_Subject)

- [Encoded](#Certificate_f_Encoded)

## Fields

 **EffectiveDate** *string (read-only)*
Default: ""

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

 **ExpirationDate** *string (read-only)*
Default: ""

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

 **ExtendedKeyUsage** *string (read-only)*
Default: ""

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

 **Fingerprint** *string (read-only)*
Default: ""

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: *bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02*

 **FingerprintSHA1** *string (read-only)*
Default: ""

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: *30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84*

 **FingerprintSHA256** *string (read-only)*
Default: ""

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: *6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53*

 **Issuer** *string (read-only)*
Default: ""

The issuer of the certificate. This field contains a string representation of the name of the issuing authority for the certificate.

 **PrivateKey** *string (read-only)*
Default: ""

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

NOTE: The [PrivateKey](#Certificate_f_PrivateKey) may be available but not exportable. In this case, [PrivateKey](#Certificate_f_PrivateKey) returns an empty string.

 **PrivateKeyAvailable** *bool (read-only)*
Default: False

Whether a [PrivateKey](#Certificate_f_PrivateKey) is available for the selected certificate. If [PrivateKeyAvailable](#Certificate_f_PrivateKeyAvailable) is True, the certificate may be used for authentication purposes (e.g., server authentication).

 **PrivateKeyContainer** *string (read-only)*
Default: ""

The name of the [PrivateKey](#Certificate_f_PrivateKey) container for the certificate (if available). This functionality is available only on Windows platforms.

 **PublicKey** *string (read-only)*
Default: ""

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

 **PublicKeyAlgorithm** *string (read-only)*
Default: ""

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

 **PublicKeyLength** *int (read-only)*
Default: 0

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

 **SerialNumber** *string (read-only)*
Default: ""

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

 **SignatureAlgorithm** *string (read-only)*
Default: ""

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

 **Store** *string*
Default: "MY"

The name of the certificate store for the client certificate.

The [StoreType](#Certificate_f_StoreType) field denotes the type of the certificate store specified by [Store](#Certificate_f_Store). If the store is password-protected, specify the password in [StorePassword](#Certificate_f_StorePassword).

[Store](#Certificate_f_Store) is used in conjunction with the [Subject](#Certificate_f_Subject) field to specify client certificates. If [Store](#Certificate_f_Store) has a value, and [Subject](#Certificate_f_Subject) or [Encoded](#Certificate_f_Encoded) is set, a search for a certificate is initiated. Please see the [Subject](#Certificate_f_Subject) field for details.

 Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

|  |  |
| --- | --- |
| MY | A certificate store holding personal certificates with their associated private keys. |
| CA | Certifying authority certificates. |
| ROOT | Root certificates. |

When the certificate store type is *cstPFXFile*, this property must be set to the name of the file. When the type is *cstPFXBlob*, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

 **StoreB** *byte []*
Default: "MY"

The name of the certificate store for the client certificate.

The [StoreType](#Certificate_f_StoreType) field denotes the type of the certificate store specified by [Store](#Certificate_f_Store). If the store is password-protected, specify the password in [StorePassword](#Certificate_f_StorePassword).

[Store](#Certificate_f_Store) is used in conjunction with the [Subject](#Certificate_f_Subject) field to specify client certificates. If [Store](#Certificate_f_Store) has a value, and [Subject](#Certificate_f_Subject) or [Encoded](#Certificate_f_Encoded) is set, a search for a certificate is initiated. Please see the [Subject](#Certificate_f_Subject) field for details.

 Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

|  |  |
| --- | --- |
| MY | A certificate store holding personal certificates with their associated private keys. |
| CA | Certifying authority certificates. |
| ROOT | Root certificates. |

When the certificate store type is *cstPFXFile*, this property must be set to the name of the file. When the type is *cstPFXBlob*, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

 **StorePassword** *string*
Default: ""

If the type of certificate store requires a password, this field is used to specify the password needed to open the certificate store.

 **StoreType** *CertStoreTypes*
Default: 0

The type of certificate store for this certificate.

 The component supports both public and private keys in a variety of formats. When the *cstAuto* value is used, the component will automatically determine the type. This field can take one of the following values:

```csharp
sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11,
                               @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll",
                               "123456", // PIN
                               "CN=cert_subject");
sftp.SSHUser = "test";
sftp.SSHLogon("myhost", 22);
```

```csharp
certmgr.CertStoreType = CertStoreTypes.cstPKCS11;
certmgr.OnCertList += (s, e) => {
  secKeyBlob = e.CertEncoded;
};
certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll";
certmgr.CertStorePassword = "123456"; // PIN
certmgr.ListStoreCertificates();

sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*");
sftp.SSHUser = "test";
sftp.SSHLogon("myhost", 22);
```

|  |  |
| --- | --- |
| 0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user. NOTE: This store type is not available in Java. |
| 1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store. NOTE: This store type is not available in Java. |
| 2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
| 3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
| 4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates. NOTE: This store type is only available in Java. |
| 5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. NOTE: This store type is only available in Java. |
| 6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
| 7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
| 8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
| 9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
| 10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
| 11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
| 12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
| 13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
| 14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
| 15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
| 16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
| 17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
| 18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
| 19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
| 21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). NOTE: This store type is only available in Java and .NET. |
| 22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. NOTE: This store type is only available in Java and .NET. |
| 23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, create a new [Certificate](#certificate-type) object and pass cstPKCS11 as the [StoreType](#Certificate_f_StoreType), the full path of the PKCS#11 DLL as the [Store](#Certificate_f_Store), and the PIN as the [StorePassword](#Certificate_f_StorePassword). Code Example. SSH Authentication with Security Key (without CertMgr): Alternatively, collect the necessary data using the [CertMgr](CertMgr.md#CertMgr) component by calling the [ListStoreCertificates](CertMgr.md#CertMgr_m_ListStoreCertificates) method after setting the corresponding properties accordingly. The certificate information returned in the [CertList](CertMgr.md#CertMgr_e_CertList) event's CertEncoded parameter may be saved for later use. When using a certificate obtained with this approach, pass the previously saved security key information as the [Store](#Certificate_f_Store) and set [StorePassword](#Certificate_f_StorePassword) to the PIN. Code Example. SSH Authentication with Security Key (with CertMgr): |
| 99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |

 **SubjectAltNames** *string (read-only)*
Default: ""

Comma-separated lists of alternative subject names for the certificate.

 **ThumbprintMD5** *string (read-only)*
Default: ""

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

 **ThumbprintSHA1** *string (read-only)*
Default: ""

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

 **ThumbprintSHA256** *string (read-only)*
Default: ""

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

 **Usage** *string (read-only)*
Default: ""

The text description of [UsageFlags](#Certificate_f_UsageFlags).

This value will be one or more of the following strings and will be separated by commas:

- Digital Signature
- Non-Repudiation
- Key Encipherment
- Data Encipherment
- Key Agreement
- Certificate Signing
- CRL Signing
- Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

 **UsageFlags** *int (read-only)*
Default: 0

The flags that show intended use for the certificate. The value of [UsageFlags](#Certificate_f_UsageFlags) is a combination of the following flags:

|  |  |
| --- | --- |
| 0x80 | Digital Signature |
| 0x40 | Non-Repudiation |
| 0x20 | Key Encipherment |
| 0x10 | Data Encipherment |
| 0x08 | Key Agreement |
| 0x04 | Certificate Signing |
| 0x02 | CRL Signing |
| 0x01 | Encipher Only |

Please see the [Usage](#Certificate_f_Usage) field for a text representation of [UsageFlags](#Certificate_f_UsageFlags).

This functionality currently is not available when the provider is OpenSSL.

 **Version** *string (read-only)*
Default: ""

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

 **Subject** *string*
Default: ""

The subject of the certificate used for client authentication.

This field will be populated with the full subject of the loaded certificate. When loading a certificate, the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=example@email.com". Common fields and their meanings are as follows:

| Field | Meaning |
| --- | --- |
| CN | Common Name. This is commonly a hostname like www.server.com. |
| O | Organization |
| OU | Organizational Unit |
| L | Locality |
| S | State |
| C | Country |
| E | Email Address |

If a field value contains a comma, it must be quoted.

 **Encoded** *string*
Default: ""

The certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The [Store](#Certificate_f_Store) and [Subject](#Certificate_f_Subject) fields also may be used to specify a certificate.

When [Encoded](#Certificate_f_Encoded) is set, a search is initiated in the current [Store](#Certificate_f_Store) for the private key of the certificate. If the key is found, [Subject](#Certificate_f_Subject) is updated to reflect the full subject of the selected certificate; otherwise, [Subject](#Certificate_f_Subject) is set to an empty string.

 **EncodedB** *byte []*
Default: ""

The certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The [Store](#Certificate_f_Store) and [Subject](#Certificate_f_Subject) fields also may be used to specify a certificate.

When [Encoded](#Certificate_f_Encoded) is set, a search is initiated in the current [Store](#Certificate_f_Store) for the private key of the certificate. If the key is found, [Subject](#Certificate_f_Subject) is updated to reflect the full subject of the selected certificate; otherwise, [Subject](#Certificate_f_Subject) is set to an empty string.

## Constructors

```text
public Certificate();
```

 Creates a instance whose properties can be set.

```text
public Certificate(string certificateFile);
```

 Opens * CertificateFile * and reads out the contents as an X.509 public key.

```text
public Certificate(byte[] encoded);
```

 Parses * Encoded * as an X.509 public key.

```text
public Certificate(CertStoreTypes storeType, string store, string storePassword, string subject);
```

 * StoreType * identifies the type of certificate store to use. See for descriptions of the different certificate stores. * Store * is a file containing the certificate store. * StorePassword * is the password used to protect the store.

 After the store has been successfully opened, the component will attempt to find the certificate identified by * Subject * . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The * Subject * parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

```text
public Certificate(CertStoreTypes storeType, string store, string storePassword, string subject, string configurationString);
```

 * StoreType * identifies the type of certificate store to use. See for descriptions of the different certificate stores. * Store * is a file containing the certificate store. * StorePassword * is the password used to protect the store.

 * ConfigurationString * is a newline-separated list of name-value pairs that may be used to modify the default behavior. Possible values include "PersistPFXKey", which shows whether or not the PFX key is persisted after performing operations with the private key. This correlates to the PKCS12_NO_PERSIST_KEY CryptoAPI option. The default value is True (the key is persisted). "Thumbprint" - an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load. When specified, this value is used to select the certificate in the store. This is applicable to the * cstUser * , * cstMachine * , * cstPublicKeyFile * , and * cstPFXFile * store types. "UseInternalSecurityAPI" shows whether the platform (default) or the internal security API is used when performing certificate-related operations.

 After the store has been successfully opened, the component will attempt to find the certificate identified by * Subject * . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The * Subject * parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

```text
public Certificate(CertStoreTypes storeType, string store, string storePassword, byte[] encoded);
```

 * StoreType * identifies the type of certificate store to use. See for descriptions of the different certificate stores. * Store * is a file containing the certificate store. * StorePassword * is the password used to protect the store.

 After the store has been successfully opened, the component will load * Encoded * as an X.509 certificate and search the opened store for a corresponding private key.

```text
public Certificate(CertStoreTypes storeType, byte[] store, string storePassword, string subject);
```

 * StoreType * identifies the type of certificate store to use. See for descriptions of the different certificate stores. * Store * is a byte array containing the certificate data. * StorePassword * is the password used to protect the store.

 After the store has been successfully opened, the component will attempt to find the certificate identified by * Subject * . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The * Subject * parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

```text
public Certificate(CertStoreTypes storeType, byte[] store, string storePassword, string subject, string configurationString);
```

 * StoreType * identifies the type of certificate store to use. See for descriptions of the different certificate stores. * Store * is a byte array containing the certificate data. * StorePassword * is the password used to protect the store.

 After the store has been successfully opened, the component will attempt to find the certificate identified by * Subject * . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The * Subject * parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

```text
public Certificate(CertStoreTypes storeType, byte[] store, string storePassword, byte[] encoded);
```

 * StoreType * identifies the type of certificate store to use. See for descriptions of the different certificate stores. * Store * is a byte array containing the certificate data. * StorePassword * is the password used to protect the store.

 After the store has been successfully opened, the component will load * Encoded * as an X.509 certificate and search the opened store for a corresponding private key.

# Config Settings ([NTLM](#ntlm-component) Component)

 The component accepts one or more of the following *configuration settings*. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these *internal properties* is provided through the [Config](#config-method-ntlm-component) method.

### NTLM Config Settings

**DecodeToken**: Whether to Base64 encode the token.This setting specifies whether to Base64 decode the [ChallengeToken](#challengetoken-property-ntlm-component). The default value is True.

**EncodeToken**: Whether to Base64 encode the token.This setting specifies whether [AuthToken](#authtoken-property-ntlm-component) and rpChallengeToken are Base64 encoded after calling [CreateAuthToken](#createauthtoken-method-ntlm-component) and rmCreateNegotiateToken;. The default value is True.

**UsePlatformNTLMAPI**: Whether to use the platform NTLM API.This setting specifies whether to use the platform NTLM API. The default value is False.

**Workstation**: The workstation name.This setting optionally specifies the workstation name of the client. By default this value is empty and the component will automatically determine the correct value.

Note: This setting is not applicable when [UsePlatformNTLMAPI](#UsePlatformNTLMAPI) is True. The platform NTLM API will always use the current workstation's name.

### Base Config Settings

**BuildInfo**: Information about the product's build.When queried, this setting will return a string containing information about the product's build.

**GUIAvailable**: Whether or not a message loop is available for processing events.In a GUI-based application, long-running blocking operations may cause the application to stop responding to input until the operation returns. The component will attempt to discover whether or not the application has a message loop and, if one is discovered, it will process events in that message loop during any such blocking operation.

In some non-GUI applications, an invalid message loop may be discovered that will result in errant behavior. In these cases, setting [GUIAvailable](#GUIAvailable) to *false* will ensure that the component does not attempt to process external events.

**LicenseInfo**: Information about the current license.When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

- Product: The product the license is for.
- Product Key: The key the license was generated from.
- License Source: Where the license was found (e.g., RuntimeLicense, License File).
- License Type: The type of license installed (e.g., Royalty Free, Single Server).
- Last Valid Build: The last valid build number for which the license will work.

**MaskSensitiveData**: Whether sensitive data is masked in log messages.In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to *true* to mask sensitive data. The default is *true*.

**UseFIPSCompliantAPI**: Tells the component whether or not to use FIPS certified APIs.When set to *true*, the component will utilize the underlying operating system's certified APIs. Java editions, regardless of OS, utilize Bouncy Castle Federal Information Processing Standards (FIPS), while all other Windows editions make use of Microsoft security libraries.

FIPS mode can be enabled by setting the *UseFIPSCompliantAPI* configuration setting to *true*. This is a static setting that applies to all instances of all components of the toolkit within the process. It is recommended to enable or disable this setting once before the component has been used to establish a connection. Enabling FIPS while an instance of the component is active and connected may result in unexpected behavior.

For more details, please see the [FIPS 140-2 Compliance](https://www.nsoftware.com/kb/articles/fips.rst) article.

NOTE: This setting is applicable only on Windows.

NOTE: Enabling FIPS compliance requires a special license; please contact [sales@nsoftware.com](mailto:sales@nsoftware.com) for details.

**UseInternalSecurityAPI**: Whether or not to use the system security libraries or an internal implementation. When set to *false*, the component will use the system security libraries by default to perform cryptographic functions where applicable. In this case, calls to unmanaged code will be made. In certain environments, this is not desirable. To use a completely managed security implementation, set this setting to *true*.

Setting this configuration setting to *true* tells the component to use the internal implementation instead of using the system security libraries.

 On Windows, this setting is set to *false* by default. On Linux/macOS, this setting is set to *true* by default.

NOTE: This setting is static. The value set is applicable to all components used in the application.

When this value is set, the product's system dynamic link library (DLL) is no longer required as a reference, as all unmanaged code is stored in that file.

# Trappable Errors ([NTLM](#ntlm-component) Component)

### NTLM Errors

|  |  |
| --- | --- |
| 101 | Component is busy. |
| 102 | Username and password must be specified. |
| 103 | ChallengeToken must be specified. |