# RADIUS Module The RADIUS module provides an easy way to authenticate users. ## Syntax ```text IPWorksAuth.RADIUS ``` ## Remarks The RADIUS component implements support for Remote Authentication Dial In User Service (RADIUS). Communication can be performed over UDP or DTLS, which is controlled by the value of the [SSLEnabled](#sslenabled-property-radius-module) property. **Authentication** The class can be used to authenticate users with a RADIUS server. To begin set the following properties: - [RemoteHost](#remotehost-property-radius-module) - [RemotePort](#remoteport-property-radius-module) (optional) - [User](#user-property-radius-module) - [Password](#password-property-radius-module) - [SharedSecret](#sharedsecret-property-radius-module) To authenticate the user call [Authenticate](#authenticate-method-radius-module). If the method returns without error the user was successfully authenticated. The [Attributes](#attributes-property-radius-module) collection will hold information about the attributes in the response. The [AuthMechanism](#authmechanism-property-radius-module) property may be set to specify the authentication mechanism used. ## Property List *The following is the full list of the properties of the module with short descriptions. Click on the links for further details.* | | | | --- | --- | | [Attributes](#attributes-property-radius-module) | The attributes of the request or response. | | [AuthMechanism](#authmechanism-property-radius-module) | The authentication mechanism to be used when connecting to the RADIUS server. | | [EAPAnonymousIdentity](#eapanonymousidentity-property-radius-module) | The identity to use when using PEAP or EAP-TLS. | | [LocalHost](#localhost-property-radius-module) | The name of the local host or user-assigned IP interface through which connections are initiated or accepted. | | [LocalPort](#localport-property-radius-module) | This property includes the User Datagram Protocol (UDP) port in the local host where UDP binds. | | [Password](#password-property-radius-module) | The user's password. | | [RemoteHost](#remotehost-property-radius-module) | This property includes the address of the remote host. Domain names are resolved to IP addresses. | | [RemotePort](#remoteport-property-radius-module) | The port for the RADIUS server (default is 1812). | | [SharedSecret](#sharedsecret-property-radius-module) | The RADIUS shared secret. | | [SSLAcceptServerCert](#sslacceptservercert-property-radius-module) | Instructs the module to unconditionally accept the server certificate that matches the supplied certificate. | | [SSLCert](#sslcert-property-radius-module) | The certificate to be used during SSL negotiation. | | [SSLEnabled](#sslenabled-property-radius-module) | This property indicates whether Datagram Transport Layer Security (DTLS) is enabled. | | [SSLServerCert](#sslservercert-property-radius-module) | The server certificate for the last established connection. | | [Timeout](#timeout-property-radius-module) | The timeout for the module. | | [User](#user-property-radius-module) | The name of the user to authenticate. | ## Method List *The following is the full list of the methods of the module with short descriptions. Click on the links for further details.* | | | | --- | --- | | [Authenticate](#authenticate-method-radius-module) | Authenticates the user. | | [Config](#config-method-radius-module) | Sets or retrieves a configuration setting. | | [DoEvents](#doevents-method-radius-module) | This method processes events from the internal message queue. | | [Interrupt](#interrupt-method-radius-module) | This method interrupts the current method. | | [Reset](#reset-method-radius-module) | Resets the module properties to their default values. | ## Event List *The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.* | | | | --- | --- | | [Attribute](#attribute-event-radius-module) | Fires for each attribute that is received. | | [Error](#error-event-radius-module) | Fired when information is available about errors during data delivery. | | [Log](#log-event-radius-module) | Fires with log information during processing. | | [SSLServerAuthentication](#sslserverauthentication-event-radius-module) | Fired after the server presents its certificate to the client. | | [SSLStatus](#sslstatus-event-radius-module) | Fired when secure connection progress messages are available. | ## Config Settings *The following is a list of config settings for the module with short descriptions. Click on the links for further details.* | | | | --- | --- | | [RequireMessageAuthenticator](#RequireMessageAuthenticator) | Whether server responses must include the Message-Authenticator attribute. | | [SendMessageAuthenticator](#SendMessageAuthenticator) | Whether to send the Message-Authenticator attribute. | | [CaptureIPPacketInfo](#CaptureIPPacketInfo) | Used to capture the packet information. | | [DelayHostResolution](#DelayHostResolution) | Whether the hostname is resolved when RemoteHost is set. | | [DestinationAddress](#DestinationAddress) | Used to get the destination address from the packet information. | | [DontFragment](#DontFragment) | Used to set the Don't Fragment flag of outgoing packets. | | [LocalHost](#LocalHost) | The name of the local host through which connections are initiated or accepted. | | [LocalPort](#LocalPort) | The port in the local host where the module binds. | | [MaxPacketSize](#MaxPacketSize) | The maximum length of the packets that can be received. | | [QOSDSCPValue](#QOSDSCPValue) | Used to specify an arbitrary QOS/DSCP setting (optional). | | [QOSTrafficType](#QOSTrafficType) | Used to specify QOS/DSCP settings (optional). | | [ShareLocalPort](#ShareLocalPort) | If set to True, allows more than one instance of the module to be active on the same local port. | | [UseConnection](#UseConnection) | Determines whether to use a connected socket. | | [UseIPv6](#UseIPv6) | Whether or not to use IPv6. | | [AbsoluteTimeout](#AbsoluteTimeout) | Determines whether timeouts are inactivity timeouts or absolute timeouts. | | [FirewallData](#FirewallData) | Used to send extra data to the firewall. | | [InBufferSize](#InBufferSize) | The size in bytes of the incoming queue of the socket. | | [OutBufferSize](#OutBufferSize) | The size in bytes of the outgoing queue of the socket. | | [LogSSLPackets](#LogSSLPackets) | Controls whether SSL packets are logged. | | [ReuseSSLSession](#ReuseSSLSession) | Determines if the SSL session is reused. | | [SSLCACerts](#SSLCACerts) | A newline separated list of CA certificates to be included when performing an SSL handshake. | | [SSLCheckCRL](#SSLCheckCRL) | Whether to check the Certificate Revocation List for the server certificate. | | [SSLCheckOCSP](#SSLCheckOCSP) | Whether to use OCSP to check the status of the server certificate. | | [SSLCipherStrength](#SSLCipherStrength) | The minimum cipher strength used for bulk encryption. | | [SSLClientCACerts](#SSLClientCACerts) | A newline separated list of CA certificates to use during SSL client certificate validation. | | [SSLEnabledCipherSuites](#SSLEnabledCipherSuites) | Specifies the cipher suites to be used during TLS negotiation. | | [SSLEnabledProtocols](#SSLEnabledProtocols) | Used to enable/disable the supported security protocols. | | [SSLEnableRenegotiation](#SSLEnableRenegotiation) | Whether the renegotiation_info SSL extension is supported. | | [SSLKeyLogFile](#SSLKeyLogFile) | The location of a file where per-session secrets are written for debugging purposes. | | [SSLNegotiatedCipher](#SSLNegotiatedCipher) | Returns the negotiated cipher suite. | | [SSLNegotiatedCipherStrength](#SSLNegotiatedCipherStrength) | Returns the negotiated cipher suite strength. | | [SSLNegotiatedCipherSuite](#SSLNegotiatedCipherSuite) | Returns the negotiated cipher suite. | | [SSLNegotiatedKeyExchange](#SSLNegotiatedKeyExchange) | Returns the negotiated key exchange algorithm. | | [SSLNegotiatedKeyExchangeStrength](#SSLNegotiatedKeyExchangeStrength) | Returns the negotiated key exchange algorithm strength. | | [SSLNegotiatedVersion](#SSLNegotiatedVersion) | Returns the negotiated protocol version. | | [SSLSecurityFlags](#SSLSecurityFlags) | Flags that control certificate verification. | | [SSLServerCACerts](#SSLServerCACerts) | A newline separated list of CA certificates to use during SSL server certificate validation. | | [TLS12SignatureAlgorithms](#TLS12SignatureAlgorithms) | Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal. | | [TLS12SupportedGroups](#TLS12SupportedGroups) | The supported groups for ECC. | | [BuildInfo](#BuildInfo) | Information about the product's build. | | [CodePage](#CodePage) | The system code page used for Unicode to Multibyte translations. | | [LicenseInfo](#LicenseInfo) | Information about the current license. | | [MaskSensitiveData](#MaskSensitiveData) | Whether sensitive data is masked in log messages. | | [UseInternalSecurityAPI](#UseInternalSecurityAPI) | Whether or not to use the system security libraries or an internal implementation. | # Attributes Property ([RADIUS](#radius-module) Module) The attributes of the request or response. ## Syntax ```text public var attributes: Array { get {...} } ``` ## Default Value "" ## Remarks This property holds a collection of attributes associated with the request or response. To include attributes in a request populate this collection before calling [Authenticate](#authenticate-method-radius-module). After [Authenticate](#authenticate-method-radius-module) returns this collection will be populated with the attributes from the response. # AuthMechanism Property ([RADIUS](#radius-module) Module) The authentication mechanism to be used when connecting to the RADIUS server. ## Syntax ```text public var authMechanism: RADIUSAuthMechanisms { get {...} set {...} } public enum RADIUSAuthMechanisms: Int32 { case ramMSCHAPv2 = 0 case ramPAP = 1 case ramPEAPv0 = 2 case ramEAPTLS = 3 } ``` ## Default Value 0 ## Remarks This property defines the authentication mechanism used when connecting to the RADIUS server. Possible values are: | | | | --- | --- | | 0 (ramMSCHAPv2 - default) | Microsoft Challenge Authentication Protocol v2 | | 1 (ramPAP) | Password Authentication Protocol | | 2 (ramPEAPv0) | Protected Extensible Authentication Protocol with MSCHAPv2 inner authentication | | 3 (ramEAPTLS) | Extensible Authentication Protocol with TLS. When set to ramEAPTLS the [SSLCert](#sslcert-property-radius-module) property must be set to the client certificate used to authenticate to the server. | # EAPAnonymousIdentity Property ([RADIUS](#radius-module) Module) The identity to use when using PEAP or EAP-TLS. ## Syntax ```text public var eapAnonymousIdentity: String { get {...} set {...} } ``` ## Default Value "anonymous" ## Remarks This property specifies the initial identity to use when establishing a secure connection using PEAP. When [AuthMechanism](#authmechanism-property-radius-module) is set to *amPEAPv0* or *emEAPTLS* the connection begins in plaintext. This property specifies the user name (if any) that is sent in the initial plaintext request. This allows the true identity of the user to be hidden. If set, the value will be sent in the plaintext connection request. If not set (empty string) the [User](#user-property-radius-module) will be sent. Authentication servers may make use of a value that includes the domain to which the user will authenticate, such as *anonymous@example.com*. In that case the user's identity is still hidden, however the authentication server will have knowledge of the domain for the user which it may make use of. Once a secure connection is established the user's true identity is sent to the authentication server over the TLS encrypted connection. This property specifies only the identity sent in the initial plaintext request. The default value is *anonymous*. This setting is only applicable when [AuthMechanism](#authmechanism-property-radius-module) is set to *amPEAPv0* or *amEAPTLS*. # LocalHost Property ([RADIUS](#radius-module) Module) The name of the local host or user-assigned IP interface through which connections are initiated or accepted. ## Syntax ```text public var localHost: String { get {...} set {...} } ``` ## Default Value "" ## Remarks This property contains the name of the local host as obtained by the *gethostname()* system call, or if the user has assigned an IP address, the value of that address. In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the class initiate connections (or accept in the case of server classes) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used. If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface). NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window. # LocalPort Property ([RADIUS](#radius-module) Module) This property includes the User Datagram Protocol (UDP) port in the local host where UDP binds. ## Syntax ```text public var localPort: Int32 { get {...} set {...} } ``` ## Default Value 0 ## Remarks The LocalPort property must be set before UDP is activated (Active is set to True). This instructs the class to bind to a specific port (or communication endpoint) in the local machine. Setting it to *0* (default) enables the Transmission Control Protocol (TCP)/IP stack to choose a port at random. The chosen port will be shown by the LocalPort property after the connection is established. LocalPort cannot be changed once the class is Active. Any attempt to set the LocalPort property when the class is Active will generate an error. The LocalPort property is useful when trying to connect to services that require a trusted port on the client side. # Password Property ([RADIUS](#radius-module) Module) The user's password. ## Syntax ```text public var password: String { get {...} set {...} } ``` ## Default Value "" ## Remarks This property specifies the password for the [User](#user-property-radius-module). This must be set before calling [Authenticate](#authenticate-method-radius-module). # RemoteHost Property ([RADIUS](#radius-module) Module) This property includes the address of the remote host. Domain names are resolved to IP addresses. ## Syntax ```text public var remoteHost: String { get {...} set {...} } ``` ## Default Value "" ## Remarks The RemoteHost property specifies the IP address (IP number in dotted internet format) or domain name of the remote host. If RemoteHost is set to 255.255.255.255, the class broadcasts data on the local subnet. If the RemoteHost property is set to a domain name, a DNS request is initiated, and upon successful termination of the request, the RemoteHost property is set to the corresponding address. If the search is not successful, an error is returned. If [UseConnection](#UseConnection) is set to True, the RemoteHost must be set before the class is activated (Active is set to True). # RemotePort Property ([RADIUS](#radius-module) Module) The port for the RADIUS server (default is 1812). ## Syntax ```text public var remotePort: Int32 { get {...} set {...} } ``` ## Default Value 1812 ## Remarks The RemotePort is the UDP port to which requests will be made. The default value is 1812. Port 1645 is also commonly used. # SharedSecret Property ([RADIUS](#radius-module) Module) The RADIUS shared secret. ## Syntax ```text public var sharedSecret: String { get {...} set {...} } public var sharedSecretB: Data { get {...} set {...} } ``` ## Default Value "" ## Remarks This property holds the shared secret to use when communicating with the RADIUS server. # SSLAcceptServerCert Property ([RADIUS](#radius-module) Module) Instructs the module to unconditionally accept the server certificate that matches the supplied certificate. ## Syntax ```text public var sslAcceptServerCert: Certificate { get {...} set {...} } ``` ## Default Value "" ## Remarks If it finds any issues with the certificate presented by the server, the class will normally terminate the connection with an error. You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally. NOTE: This functionality is provided only for cases in which you otherwise know that you are communicating with the right server. If used improperly, this property may create a security breach. Use it at your own risk. # SSLCert Property ([RADIUS](#radius-module) Module) The certificate to be used during SSL negotiation. ## Syntax ```text public var sslCert: Certificate { get {...} set {...} } ``` ## Default Value "" ## Remarks The digital certificate that the class will use during SSL negotiation. Set this property to a valid certificate before starting SSL negotiation. To set a certificate, you may set the field to the encoded certificate. To select a certificate, use the store and subject fields. # SSLEnabled Property ([RADIUS](#radius-module) Module) This property indicates whether Datagram Transport Layer Security (DTLS) is enabled. ## Syntax ```text public var sslEnabled: Bool { get {...} set {...} } ``` ## Default Value False ## Remarks This property specifies whether DTLS is enabled in the class. When *false* (default), the class operates in plaintext mode over UDP. When *true*, DTLS is enabled. # SSLServerCert Property ([RADIUS](#radius-module) Module) The server certificate for the last established connection. ## Syntax ```text public var sslServerCert: Certificate { get {...} } ``` ## Default Value "" ## Remarks This property contains the server certificate for the last established connection. SSLServerCert is reset every time a new connection is attempted. # Timeout Property ([RADIUS](#radius-module) Module) The timeout for the module. ## Syntax ```text public var timeout: Int32 { get {...} set {...} } ``` ## Default Value 60 ## Remarks If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered. If Timeout is set to a positive value, the class will wait for the operation to complete before returning control. The class will use [DoEvents](#doevents-method-radius-module) to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive. If Timeout expires, and the operation is not yet complete, the class . NOTE: By default, all timeouts are *inactivity timeouts*, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received. The default value for the Timeout property is 60 seconds. # User Property ([RADIUS](#radius-module) Module) The name of the user to authenticate. ## Syntax ```text public var user: String { get {...} set {...} } ``` ## Default Value "" ## Remarks This property holds the name of the user to authenticate. # Authenticate Method ([RADIUS](#radius-module) Module) Authenticates the user. ## Syntax ```text public func authenticate() throws -> Void ``` ## Remarks This method authenticates the user with the RADIUS server. If authentication is successful this method returns without error. If authentication fails this method will throw an exception. This following properties are applicable when calling this method: - [User](#user-property-radius-module) (required) - [Password](#password-property-radius-module) (required) - [SharedSecret](#sharedsecret-property-radius-module) (required) - [RemoteHost](#remotehost-property-radius-module) (required) - [RemotePort](#remoteport-property-radius-module) - [Timeout](#timeout-property-radius-module) # Config Method ([RADIUS](#radius-module) Module) Sets or retrieves a configuration setting. ## Syntax ```text public func config(configurationString: String) throws -> String ``` ## Remarks Config is a generic method available in every class. It is used to set and retrieve [configuration settings](#config-settings-radius-module) for the class. These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these *internal properties* is provided through the Config method. To set a configuration setting named *PROPERTY*, you must call *Config("PROPERTY=VALUE")*, where *VALUE* is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter). To read (query) the value of a [configuration setting](#config-settings-radius-module), you must call *Config("PROPERTY")*. The value will be returned as a string. # DoEvents Method ([RADIUS](#radius-module) Module) This method processes events from the internal message queue. ## Syntax ```text public func doEvents() throws -> Void ``` ## Remarks When DoEvents is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns. # Interrupt Method ([RADIUS](#radius-module) Module) This method interrupts the current method. ## Syntax ```text public func interrupt() throws -> Void ``` ## Remarks If there is no method in progress, Interrupt simply returns, doing nothing. # Reset Method ([RADIUS](#radius-module) Module) Resets the component properties to their default values. ## Syntax ```text public func reset() throws -> Void ``` ## Remarks This method resets the properties to their default values. # Attribute Event ([RADIUS](#radius-module) Module) Fires for each attribute that is received. ## Syntax ```text func onAttribute(attributeType: Int32, name: String, value: Data) ``` ## Remarks This event fires once for each attribute that is received. This will fire when calling [Authenticate](#authenticate-method-radius-module). **AttributeType** is the attribute type. Common values are: | AttributeType | Meaning | | --- | --- | | 1 | User-Name | | 2 | User-Password | | 3 | CHAP-Password | | 4 | NAS-IP-Address | | 5 | NAS-Port | | 6 | Service-Type | | 7 | Framed-Protocol | | 8 | Framed-IP-Address | | 9 | Framed-IP-Netmask | | 10 | Framed-Routing | | 11 | Filter-Id | | 12 | Framed-MTU | | 13 | Framed-Compression | | 14 | Login-IP-Host | | 15 | Login-Service | | 16 | Login-TCP-Port | | 17 | (unassigned) | | 18 | Reply-Message | | 19 | Callback-Number | | 20 | Callback-Id | | 21 | (unassigned) | | 22 | Framed-Route | | 23 | Framed-IPX-Network | | 24 | State | | 25 | Class | | 26 | Vendor-Specific | | 27 | Session-Timeout | | 28 | Idle-Timeout | | 29 | Termination-Action | | 30 | Called-Station-Id | | 31 | Calling-Station-Id | | 32 | NAS-Identifier | | 33 | Proxy-State | | 34 | Login-LAT-Service | | 35 | Login-LAT-Node | | 36 | Login-LAT-Group | | 37 | Framed-AppleTalk-Link | | 38 | Framed-AppleTalk-Network | | 39 | Framed-AppleTalk-Zone | | 40-59 | Reserved for accounting | | 60 | CHAP-Challenge | | 61 | NAS-Port-Type | | 62 | Port-Limit | | 63 | Login-LAT-Port | **Name** is the text description of the attribute. **Value** is the value of the attribute. # Error Event ([RADIUS](#radius-module) Module) Fired when information is available about errors during data delivery. ## Syntax ```text func onError(errorCode: Int32, description: String) ``` ## Remarks The Error event is fired in case of exceptional conditions during message processing. Normally the class . The *ErrorCode* parameter contains an error code, and the *Description* parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the [Error Codes](#trappable-errors-radius-module) section. # Log Event ([RADIUS](#radius-module) Module) Fires with log information during processing. ## Syntax ```text func onLog(logLevel: Int32, message: String, logType: String) ``` ## Remarks This event fires during processing with log information. The level of detail that is logged is controlled via the [LogLevel](#LogLevel). *LogLevel* indicates the level of message. Possible values are: | | | | --- | --- | | 0 (None) | No events are logged. | | 1 (Info - default) | Informational events are logged. | | 2 (Verbose) | Detailed data is logged. | | 3 (Debug) | Debug data is logged. | *LogMessage* is the log entry. *LogType* indicates the type of log. Possible values are: - "REQUEST" - "RESPONSE" # SSLServerAuthentication Event ([RADIUS](#radius-module) Module) Fired after the server presents its certificate to the client. ## Syntax ```text func onSSLServerAuthentication(certEncoded: Data, certSubject: String, certIssuer: String, status: String, accept: inout Bool) ``` ## Remarks During this event, the client can decide whether or not to continue with the connection process. The *Accept* parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue. When *Accept* is False, *Status* shows why the verification failed (otherwise, *Status* contains the string *OK*). If it is decided to continue, you can override and accept the certificate by setting the *Accept* parameter to True. # SSLStatus Event ([RADIUS](#radius-module) Module) Fired when secure connection progress messages are available. ## Syntax ```text func onSSLStatus(message: String) ``` ## Remarks The event is fired for informational and logging purposes only. This event tracks the progress of the connection. # Certificate Type This is the digital certificate being used. ## Remarks This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates. The following fields are available: - [EffectiveDate](#Certificate_f_EffectiveDate) - [ExpirationDate](#Certificate_f_ExpirationDate) - [ExtendedKeyUsage](#Certificate_f_ExtendedKeyUsage) - [Fingerprint](#Certificate_f_Fingerprint) - [FingerprintSHA1](#Certificate_f_FingerprintSHA1) - [FingerprintSHA256](#Certificate_f_FingerprintSHA256) - [Issuer](#Certificate_f_Issuer) - [PrivateKey](#Certificate_f_PrivateKey) - [PrivateKeyAvailable](#Certificate_f_PrivateKeyAvailable) - [PrivateKeyContainer](#Certificate_f_PrivateKeyContainer) - [PublicKey](#Certificate_f_PublicKey) - [PublicKeyAlgorithm](#Certificate_f_PublicKeyAlgorithm) - [PublicKeyLength](#Certificate_f_PublicKeyLength) - [SerialNumber](#Certificate_f_SerialNumber) - [SignatureAlgorithm](#Certificate_f_SignatureAlgorithm) - [Store](#Certificate_f_Store) - [StorePassword](#Certificate_f_StorePassword) - [StoreType](#Certificate_f_StoreType) - [SubjectAltNames](#Certificate_f_SubjectAltNames) - [ThumbprintMD5](#Certificate_f_ThumbprintMD5) - [ThumbprintSHA1](#Certificate_f_ThumbprintSHA1) - [ThumbprintSHA256](#Certificate_f_ThumbprintSHA256) - [Usage](#Certificate_f_Usage) - [UsageFlags](#Certificate_f_UsageFlags) - [Version](#Certificate_f_Version) - [Subject](#Certificate_f_Subject) - [Encoded](#Certificate_f_Encoded) ## Fields **effectiveDate** *String (read-only)* *Default Value: ""* The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date: 23-Jan-2000 15:00:00. **expirationDate** *String (read-only)* *Default Value: ""* The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date: 23-Jan-2001 15:00:00. **extendedKeyUsage** *String (read-only)* *Default Value: ""* A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs). **fingerprint** *String (read-only)* *Default Value: ""* The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys. The following example illustrates the format: *bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02* **fingerprintSHA1** *String (read-only)* *Default Value: ""* The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys. The following example illustrates the format: *30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84* **fingerprintSHA256** *String (read-only)* *Default Value: ""* The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys. The following example illustrates the format: *6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53* **issuer** *String (read-only)* *Default Value: ""* The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate. **privateKey** *String (read-only)* *Default Value: ""* The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data. NOTE: The may be available but not exportable. In this case, returns an empty string. **privateKeyAvailable** *Bool (read-only)* *Default Value: False* Whether a is available for the selected certificate. If is True, the certificate may be used for authentication purposes (e.g., server authentication). **privateKeyContainer** *String (read-only)* *Default Value: ""* The name of the container for the certificate (if available). This functionality is available only on Windows platforms. **publicKey** *String (read-only)* *Default Value: ""* The public key of the certificate. The key is provided as PEM/Base64-encoded data. **publicKeyAlgorithm** *String (read-only)* *Default Value: ""* The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm. **publicKeyLength** *Int32 (read-only)* *Default Value: 0* The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048. **serialNumber** *String (read-only)* *Default Value: ""* The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number. **signatureAlgorithm** *String (read-only)* *Default Value: ""* The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm. **storeB** *Data* *Default Value: "MY"* The name of the certificate store for the client certificate. The property denotes the type of the certificate store specified by . If the store is password-protected, specify the password in . is used in conjunction with the property to specify client certificates. If has a value, and or is set, a search for a certificate is initiated. Please see the property for details. Designations of certificate stores are platform dependent. The following designations are the most common User and Machine certificate stores in Windows: | | | | --- | --- | | MY | A certificate store holding personal certificates with their associated private keys. | | CA | Certifying authority certificates. | | ROOT | Root certificates. | When the certificate store type is *cstPFXFile*, this property must be set to the name of the file. When the type is *cstPFXBlob*, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store). **store** *String* *Default Value: "MY"* The name of the certificate store for the client certificate. The property denotes the type of the certificate store specified by . If the store is password-protected, specify the password in . is used in conjunction with the property to specify client certificates. If has a value, and or is set, a search for a certificate is initiated. Please see the property for details. Designations of certificate stores are platform dependent. The following designations are the most common User and Machine certificate stores in Windows: | | | | --- | --- | | MY | A certificate store holding personal certificates with their associated private keys. | | CA | Certifying authority certificates. | | ROOT | Root certificates. | When the certificate store type is *cstPFXFile*, this property must be set to the name of the file. When the type is *cstPFXBlob*, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store). **storePassword** *String* *Default Value: ""* If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. **storeType** *CertStoreTypes* *Default Value: 0* The type of certificate store for this certificate. The class supports both public and private keys in a variety of formats. When the *cstAuto* value is used, the class will automatically determine the type. This property can take one of the following values: ```csharp sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll", "123456", // PIN "CN=cert_subject"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22); ``` ```csharp certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; // PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22); ``` | | | | --- | --- | | 0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user. NOTE: This store type is not available in Java. | | 1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store. NOTE: This store type is not available in Java. | | 2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. | | 3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. | | 4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates. NOTE: This store type is only available in Java. | | 5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. NOTE: This store type is only available in Java. | | 6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. | | 7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. | | 8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. | | 9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. | | 10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. | | 11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. | | 12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. | | 13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. | | 14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). | | 15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). | | 16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. | | 17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. | | 18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). | | 19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). | | 21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). NOTE: This store type is only available in Java and .NET. | | 22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. NOTE: This store type is only available in Java and .NET. | | 23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, create a new [Certificate](#certificate-type) object and pass cstPKCS11 as the [](#f_StoreType), the full path of the PKCS#11 DLL as the [](#f_Store), and the PIN as the [](#f_StorePassword). Code Example. SSH Authentication with Security Key (without CertMgr): Alternatively, collect the necessary data using the [CertMgr](CertMgr.md#CertMgr) class by calling the [ListStoreCertificates](CertMgr.md#CertMgr_m_ListStoreCertificates) method after setting the corresponding properties accordingly. The certificate information returned in the [CertList](CertMgr.md#CertMgr_e_CertList) event's CertEncoded parameter may be saved for later use. When using a certificate obtained with this approach, pass the previously saved security key information as the [](#f_Store) and set [](#f_StorePassword) to the PIN. Code Example. SSH Authentication with Security Key (with CertMgr): | | 99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. | **subjectAltNames** *String (read-only)* *Default Value: ""* Comma-separated lists of alternative subject names for the certificate. **thumbprintMD5** *String (read-only)* *Default Value: ""* The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed. **thumbprintSHA1** *String (read-only)* *Default Value: ""* The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed. **thumbprintSHA256** *String (read-only)* *Default Value: ""* The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed. **usage** *String (read-only)* *Default Value: ""* The text description of . This value will be one or more of the following strings and will be separated by commas: - Digital Signature - Non-Repudiation - Key Encipherment - Data Encipherment - Key Agreement - Certificate Signing - CRL Signing - Encipher Only If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names. **usageFlags** *Int32 (read-only)* *Default Value: 0* The flags that show intended use for the certificate. The value of is a combination of the following flags: | | | | --- | --- | | 0x80 | Digital Signature | | 0x40 | Non-Repudiation | | 0x20 | Key Encipherment | | 0x10 | Data Encipherment | | 0x08 | Key Agreement | | 0x04 | Certificate Signing | | 0x02 | CRL Signing | | 0x01 | Encipher Only | Please see the property for a text representation of . This functionality currently is not available when the provider is OpenSSL. **version** *String (read-only)* *Default Value: ""* The certificate's version number. The possible values are the strings "V1", "V2", and "V3". **subject** *String* *Default Value: ""* The subject of the certificate used for client authentication. This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject. If a matching certificate is found, the property is set to the full subject of the matching certificate. If an exact match is not found, the store is searched for subjects containing the value of the property. If a match is still not found, the property is set to an empty string, and no certificate is selected. The special value "*" picks a random certificate in the certificate store. The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=example@email.com". Common fields and their meanings are as follows: | Field | Meaning | | --- | --- | | CN | Common Name. This is commonly a hostname like www.server.com. | | O | Organization | | OU | Organizational Unit | | L | Locality | | S | State | | C | Country | | E | Email Address | If a field value contains a comma, it must be quoted. **encodedB** *Data* *Default Value: ""* The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The and properties also may be used to specify a certificate. When is set, a search is initiated in the current for the private key of the certificate. If the key is found, is updated to reflect the full subject of the selected certificate; otherwise, is set to an empty string. **encoded** *String* *Default Value: ""* The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The and properties also may be used to specify a certificate. When is set, a search is initiated in the current for the private key of the certificate. If the key is found, is updated to reflect the full subject of the selected certificate; otherwise, is set to an empty string. ## Constructors *Swift Syntax* ```text public init() ``` Creates a instance whose properties can be set. *Swift Syntax* ```text public init(encoded: ) ``` Parses * Encoded * as an X.509 public key. *Swift Syntax* ```text public init(storeType: , store: , storePassword: , subject: ) ``` * StoreType * identifies the type of certificate store to use. See for descriptions of the different certificate stores. * Store * is a file containing the certificate store. * StorePassword * is the password used to protect the store. After the store has been successfully opened, the component will attempt to find the certificate identified by * Subject * . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The * Subject * parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format. *Swift Syntax* ```text public init(storeType: , store: , storePassword: , subject: ) ``` * StoreType * identifies the type of certificate store to use. See for descriptions of the different certificate stores. * Store * is a byte array containing the certificate data. * StorePassword * is the password used to protect the store. After the store has been successfully opened, the component will attempt to find the certificate identified by * Subject * . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The * Subject * parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format. # RADIUSAttribute Type This type holds details of the RADIUS attribute. ## Remarks This type holds details of the RADIUS attribute such as type and value. The following fields are available: - [AttributeType](#RADIUSAttribute_f_AttributeType) - [Name](#RADIUSAttribute_f_Name) - [Value](#RADIUSAttribute_f_Value) ## Fields **attributeType** *Int32* *Default Value: 0* The type of the attribute. This property identifies the type of the attribute. Common values are: | AttributeType | Meaning | | --- | --- | | 1 | User-Name | | 2 | User-Password | | 3 | CHAP-Password | | 4 | NAS-IP-Address | | 5 | NAS-Port | | 6 | Service-Type | | 7 | Framed-Protocol | | 8 | Framed-IP-Address | | 9 | Framed-IP-Netmask | | 10 | Framed-Routing | | 11 | Filter-Id | | 12 | Framed-MTU | | 13 | Framed-Compression | | 14 | Login-IP-Host | | 15 | Login-Service | | 16 | Login-TCP-Port | | 17 | (unassigned) | | 18 | Reply-Message | | 19 | Callback-Number | | 20 | Callback-Id | | 21 | (unassigned) | | 22 | Framed-Route | | 23 | Framed-IPX-Network | | 24 | State | | 25 | Class | | 26 | Vendor-Specific | | 27 | Session-Timeout | | 28 | Idle-Timeout | | 29 | Termination-Action | | 30 | Called-Station-Id | | 31 | Calling-Station-Id | | 32 | NAS-Identifier | | 33 | Proxy-State | | 34 | Login-LAT-Service | | 35 | Login-LAT-Node | | 36 | Login-LAT-Group | | 37 | Framed-AppleTalk-Link | | 38 | Framed-AppleTalk-Network | | 39 | Framed-AppleTalk-Zone | | 40-59 | Reserved for accounting | | 60 | CHAP-Challenge | | 61 | NAS-Port-Type | | 62 | Port-Limit | | 63 | Login-LAT-Port | **name** *String (read-only)* *Default Value: ""* A text description of the attribute type. This property holds a text description of the . **valueB** *Data* *Default Value: ""* The attribute value. **value** *String* *Default Value: ""* The attribute value. ## Constructors *Swift Syntax* ```text public init() ``` *Swift Syntax* ```text public init(attributeType: ) ``` *Swift Syntax* ```text public init(attributeType: , value: ) ``` # Config Settings ([RADIUS](#radius-module) Module) The class accepts one or more of the following *configuration settings*. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these *internal properties* is provided through the [Config](#config-method-radius-module) method. ### RADIUS Config Settings **RequireMessageAuthenticator**: Whether server responses must include the Message-Authenticator attribute.This setting specifies whether the Message-Authenticator attribute must be included in server responses. The Message-Authenticator attribute allows integrity checking of the response packet, which increases security. When set to *true* (default) if a server response does not include the attribute the packet will be ignored. If set to *false* the attribute is not required to be present in server responses. **SendMessageAuthenticator**: Whether to send the Message-Authenticator attribute.This setting specifies whether the Message-Authenticator attribute is sent. The default value is *true*. In most cases there is no reason to set this to *false*. When *true*, authentication can succeed whether the RADIUS server requires the Message-Authenticator attribute or not. ### UDP Config Settings **CaptureIPPacketInfo**: Used to capture the packet information.If this is set to True, the component will capture the IP packet information. The default value for this setting is False. NOTE: This configuration setting is available only in Windows. **DelayHostResolution**: Whether the hostname is resolved when RemoteHost is set.This configuration setting specifies whether a hostname is resolved immediately when [RemoteHost](#remotehost-property-radius-module) is set. If *true* the class will resolve the hostname and the IP address will be present in the [RemoteHost](#remotehost-property-radius-module) property. If *false*, the hostname is not resolved until needed by the component when a method to connect or send data is called. If desired, ResolveRemoteHost may be called to manually resolve the value in [RemoteHost](#remotehost-property-radius-module) at any time. The default value is *false*. **DestinationAddress**: Used to get the destination address from the packet information.If [CaptureIPPacketInfo](#CaptureIPPacketInfo) is set to True, then this will be populated with the packet's destination address when a packet is received. This information will be accessible in the DataIn event. NOTE: This configuration setting is available only in Windows. **DontFragment**: Used to set the Don't Fragment flag of outgoing packets.When set to True, packets sent by the class will have the Don't Fragment flag set. The default value is False. **LocalHost**: The name of the local host through which connections are initiated or accepted. The [LocalHost](#localhost-property-radius-module) setting contains the name of the local host as obtained by the *gethostname()* system call, or if the user has assigned an IP address, the value of that address. In multihomed hosts (machines with more than one IP interface), setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classes) only through that interface. If the class is connected, the [LocalHost](#localhost-property-radius-module) setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface). **LocalPort**: The port in the local host where the class binds. This configuration setting must be set before a connection is attempted. It instructs the class to bind to a specific port (or communication endpoint) in the local machine. Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by [LocalPort](#localport-property-radius-module) after the connection is established. [LocalPort](#localport-property-radius-module) cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error. This configuration setting is useful when trying to connect to services that require a trusted port on the client side. An example is the remote shell (rsh) service in UNIX systems. **MaxPacketSize**: The maximum length of the packets that can be received.This configuration setting specifies the maximum size of the datagrams that the class will accept without truncation. **QOSDSCPValue**: Used to specify an arbitrary QOS/DSCP setting (optional).[UseConnection](#UseConnection) must be True to use this configuration setting. This option allows you to specify an arbitrary DSCP value between 0 and 63. The default is 0. When set to the default value, the component will not set a DSCP value. NOTE: This configuration setting uses the qWAVE API and is available only on Windows 7, Windows Server 2008 R2, and later. **QOSTrafficType**: Used to specify QOS/DSCP settings (optional).[UseConnection](#UseConnection) must be True to use this setting. You may specify either the text or integer values: BestEffort (0), Background (1), ExcellentEffort (2), AudioVideo (3), Voice (4), and Control (5). NOTE: This configuration setting uses the qWAVE API and is available only on Windows Vista and Windows Server 2008 or above. NOTE: QOSTrafficType must be set before setting Active to True. **ShareLocalPort**: If set to True, allows more than one instance of the class to be active on the same local port.This option must be set before the class is activated through the Active property or it will have no effect. The default value for this setting is False. **UseConnection**: Determines whether to use a connected socket.[UseConnection](#UseConnection) specifies whether or not the class should use a connected socket. The connection is defined as an association in between the local address/port and the remote address/port. As such, this is not a connection in the traditional Transmission Control Protocol (TCP) sense. It means only that the class will send and receive data to and from the specified destination. The default value for this setting is False. **UseIPv6**: Whether or not to use IPv6.By default, the component expects an IPv4 address for local and remote host properties, and it will create an IPv4 socket. To use IPv6 instead, set this to True. ### Socket Config Settings **AbsoluteTimeout**: Determines whether timeouts are inactivity timeouts or absolute timeouts.If [AbsoluteTimeout](#AbsoluteTimeout) is set to True, any method that does not complete within [Timeout](#timeout-property-radius-module) seconds will be aborted. By default, *AbsoluteTimeout* is False, and the timeout is an inactivity timeout. NOTE: This option is not valid for User Datagram Protocol (UDP) ports. **FirewallData**: Used to send extra data to the firewall.When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g., headers for custom authentication schemes). **InBufferSize**: The size in bytes of the incoming queue of the socket.This is the size of an internal queue in the Transmission Control Protocol (TCP)/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. In some cases, increasing the value of the *InBufferSize* setting can provide significant improvements in performance. Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the *InBufferSize* reverts to its defined size. The same happens if you attempt to make it too large or too small. **OutBufferSize**: The size in bytes of the outgoing queue of the socket.This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. In some cases, increasing the value of the *OutBufferSize* setting can provide significant improvements in performance. Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the *OutBufferSize* reverts to its defined size. The same happens if you attempt to make it too large or too small. ### SSL Config Settings **LogSSLPackets**: Controls whether SSL packets are logged.This configuration setting controls whether SSL packets should be logged. By default, this configuration setting is *False*, as it is useful only for debugging purposes. When enabled, SSL packet logs are output using the [SSLStatus](#sslstatus-event-radius-module) event, which will fire each time a SSL packet is sent or received. **ReuseSSLSession**: Determines if the SSL session is reused. If set to True, the class will reuse the context if and only if the following criteria are met: - The target host name is the same. - The system cache entry has not expired (default timeout is 10 hours). - The application process that calls the function is the same. - The logon session is the same. - The instance of the class is the same. **SSLCACerts**: A newline separated list of CA certificates to be included when performing an SSL handshake.When SSLProvider is set to *Internal*, this configuration setting specifies one or more CA certificates to be included with the [SSLCert](#sslcert-property-radius-module) property. Some servers or clients require the entire chain, including CA certificates, to be presented when performing SSL authentication. The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance: ```text -----BEGIN CERTIFICATE----- MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw ... Intermediate Cert ... eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w F0I1XhM+pKj7FjDr+XNj -----END CERTIFICATE----- \r \n -----BEGIN CERTIFICATE----- MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp ... Root Cert ... d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA -----END CERTIFICATE----- ``` **SSLCheckCRL**: Whether to check the Certificate Revocation List for the server certificate.This configuration setting specifies whether the class will check the Certificate Revocation List (CRL) specified by the server certificate. If set to 1 or 2, the class will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The class will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the class . When set to 0 (default), the CRL check will not be performed by the class. When set to 1, it will attempt to perform the CRL check, but it will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported. This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems. **SSLCheckOCSP**: Whether to use OCSP to check the status of the server certificate.This configuration setting specifies whether the class will use OCSP to check the validity of the server certificate. If set to 1 or 2, the class will first obtain the Online Certificate Status Protocol (OCSP) URL from the server certificate's OCSP extension. The class will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation, the class . When set to 0 (default), the class will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but it will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported. This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems. **SSLCipherStrength**: The minimum cipher strength used for bulk encryption. This minimum cipher strength is largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated. NOTE: This configuration setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the [SSLStatus](#sslstatus-event-radius-module) event. Use this configuration setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application. When the provider is OpenSSL, [SSLCipherStrength](#SSLCipherStrength) is currently not supported. This functionality is instead made available through the [OpenSSLCipherList](#OpenSSLCipherList) configuration setting. **SSLClientCACerts**: A newline separated list of CA certificates to use during SSL client certificate validation.This configuration setting is only applicable to server components (e.g., TCPServer) see [SSLServerCACerts](#SSLServerCACerts) for client components (e.g., TCPClient). This setting can be used to optionally specify one or more CA certificates to be used when verifying the client certificate that is presented by the client during the SSL handshake when SSLAuthenticateClients is enabled. When verifying the client's certificate, the certificates trusted by the system will be used as part of the verification process. If the client's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This configuration setting should be set only if the client's CA certificates are not already trusted on the system and cannot be installed to the trusted system store. The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance: ```text -----BEGIN CERTIFICATE----- MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw ... Intermediate Cert ... eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w F0I1XhM+pKj7FjDr+XNj -----END CERTIFICATE----- \r \n -----BEGIN CERTIFICATE----- MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp ... Root Cert ... d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA -----END CERTIFICATE----- ``` **SSLEnabledCipherSuites**: Specifies the cipher suites to be used during TLS negotiation.This configuration is used to specify the cipher suites to be used during TLS negotiation. By default, the enabled cipher suites will include all available ciphers ("*"). The special value "*" means that the class will pick all of the supported cipher suites. If [SSLEnabledCipherSuites](#SSLEnabledCipherSuites) is set to any other value, only the specified cipher suites will be considered. Multiple cipher suites are separated by semicolons. For example: ```text obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA"); obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_ECDH_RSA_WITH_AES_128_CBC_SHA"); ``` Possible cipher suites include the following: - TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 - TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 - TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 - TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 - TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 - TLS_RSA_WITH_AES_256_GCM_SHA384 - TLS_RSA_WITH_AES_128_GCM_SHA256 - TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 - TLS_DHE_DSS_WITH_AES_256_GCM_SHA384 - TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 - TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 - TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 - TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 - TLS_DHE_DSS_WITH_AES_128_GCM_SHA256 - TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 - TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 - TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 - TLS_DHE_DSS_WITH_AES_256_CBC_SHA256 - TLS_RSA_WITH_AES_256_CBC_SHA256 - TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 - TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 - TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 - TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 - TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 - TLS_RSA_WITH_AES_128_CBC_SHA256 - TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 - TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 - TLS_DHE_DSS_WITH_AES_128_CBC_SHA256 - TLS_RSA_WITH_AES_256_CBC_SHA - TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA - TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA - TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA - TLS_DHE_RSA_WITH_AES_256_CBC_SHA - TLS_ECDH_RSA_WITH_AES_256_CBC_SHA - TLS_DHE_DSS_WITH_AES_256_CBC_SHA - TLS_RSA_WITH_AES_128_CBC_SHA - TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA - TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA - TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA - TLS_ECDH_RSA_WITH_AES_128_CBC_SHA - TLS_DHE_RSA_WITH_AES_128_CBC_SHA - TLS_DHE_DSS_WITH_AES_128_CBC_SHA - TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA - TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA - TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA - TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA - TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA - TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA - TLS_RSA_WITH_3DES_EDE_CBC_SHA - TLS_RSA_WITH_DES_CBC_SHA - TLS_DHE_RSA_WITH_DES_CBC_SHA - TLS_DHE_DSS_WITH_DES_CBC_SHA - TLS_RSA_WITH_RC4_128_MD5 - TLS_RSA_WITH_RC4_128_SHA **SSLEnabledProtocols**: Used to enable/disable the supported security protocols.This configuration setting is used to enable or disable the supported security protocols. The default value is *3072*. To specify a combination of enabled protocol versions set this config to the binary *OR* of one or more of the following values: | | | | --- | --- | | TLS1.2 | 3072 (Hex C00) (Default - Client and Server) | **SSLEnableRenegotiation**: Whether the renegotiation_info SSL extension is supported.This configuration setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This configuration setting is *false* by default, but it can be set to *true* to enable the extension. This configuration setting is applicable only when SSLProvider is set to *Internal*. **SSLKeyLogFile**: The location of a file where per-session secrets are written for debugging purposes.This configuration setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes. When set, the class will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools, such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffic for debugging purposes. When writing to this file, the class will only append, it will not overwrite previous values. NOTE: This configuration setting is applicable only when SSLProvider is set to *Internal*. **SSLNegotiatedCipher**: Returns the negotiated cipher suite.This configuration setting returns the cipher suite negotiated during the SSL handshake. NOTE: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: ```csharp server.Config("SSLNegotiatedCipher[connId]"); ``` **SSLNegotiatedCipherStrength**: Returns the negotiated cipher suite strength.This configuration setting returns the strength of the cipher suite negotiated during the SSL handshake. NOTE: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: ```csharp server.Config("SSLNegotiatedCipherStrength[connId]"); ``` **SSLNegotiatedCipherSuite**: Returns the negotiated cipher suite.This configuration setting returns the cipher suite negotiated during the SSL handshake represented as a single string. NOTE: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: ```csharp server.Config("SSLNegotiatedCipherSuite[connId]"); ``` **SSLNegotiatedKeyExchange**: Returns the negotiated key exchange algorithm.This configuration setting returns the key exchange algorithm negotiated during the SSL handshake. NOTE: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: ```csharp server.Config("SSLNegotiatedKeyExchange[connId]"); ``` **SSLNegotiatedKeyExchangeStrength**: Returns the negotiated key exchange algorithm strength.This configuration setting returns the strength of the key exchange algorithm negotiated during the SSL handshake. NOTE: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: ```csharp server.Config("SSLNegotiatedKeyExchangeStrength[connId]"); ``` **SSLNegotiatedVersion**: Returns the negotiated protocol version.This configuration setting returns the protocol version negotiated during the SSL handshake. NOTE: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: ```csharp server.Config("SSLNegotiatedVersion[connId]"); ``` **SSLSecurityFlags**: Flags that control certificate verification.The following flags are defined (specified in hexadecimal notation). They can be ORed together to exclude multiple conditions: | | | | --- | --- | | 0x00000001 | Ignore time validity status of certificate. | | 0x00000002 | Ignore time validity status of CTL. | | 0x00000004 | Ignore non-nested certificate times. | | 0x00000010 | Allow unknown certificate authority. | | 0x00000020 | Ignore wrong certificate usage. | | 0x00000100 | Ignore unknown certificate revocation status. | | 0x00000200 | Ignore unknown CTL signer revocation status. | | 0x00000400 | Ignore unknown certificate authority revocation status. | | 0x00000800 | Ignore unknown root revocation status. | | 0x00008000 | Allow test root certificate. | | 0x00004000 | Trust test root certificate. | | 0x80000000 | Ignore non-matching CN (certificate CN non-matching server name). | This functionality is currently not available when the provider is OpenSSL. **SSLServerCACerts**: A newline separated list of CA certificates to use during SSL server certificate validation.This configuration setting is only used by client components (e.g., TCPClient) see [SSLClientCACerts](#SSLClientCACerts) for server components (e.g., TCPServer). This configuration setting can be used to optionally specify one or more CA certificates to be used when connecting to the server and verifying the server certificate. When verifying the server's certificate, the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This configuration setting should be set only if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store. The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance: ```text -----BEGIN CERTIFICATE----- MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw ... Intermediate Cert... eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w F0I1XhM+pKj7FjDr+XNj -----END CERTIFICATE----- \r \n -----BEGIN CERTIFICATE----- MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp ... Root Cert... d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA -----END CERTIFICATE----- ``` **TLS12SignatureAlgorithms**: Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.This configuration setting specifies the allowed server certificate signature algorithms when SSLProvider is set to *Internal* and [SSLEnabledProtocols](#SSLEnabledProtocols) is set to allow TLS 1.2. When specified the class will verify that the server certificate signature algorithm is among the values specified in this configuration setting. If the server certificate signature algorithm is unsupported, the class . The format of this value is a comma-separated list of hash-signature combinations. For instance: ```csharp component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); ``` The default value for this configuration setting is *sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa*. To not restrict the server's certificate signature algorithm, specify an empty string as the value for this configuration setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent. **TLS12SupportedGroups**: The supported groups for ECC.This configuration setting specifies a comma-separated list of named groups used in TLS 1.2 for ECC. The default value is *ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1*. When using TLS 1.2 and SSLProvider is set to *Internal*, the values refer to the supported groups for ECC. The following values are supported: - "ecdhe_secp256r1" (default) - "ecdhe_secp384r1" (default) - "ecdhe_secp521r1" (default) ### Base Config Settings **BuildInfo**: Information about the product's build.When queried, this setting will return a string containing information about the product's build. **CodePage**: The system code page used for Unicode to Multibyte translations.The default code page is Unicode UTF-8 (65001). The following is a list of valid code page identifiers: | | | | --- | --- | | Identifier | Name | | 037 | IBM EBCDIC - U.S./Canada | | 437 | OEM - United States | | 500 | IBM EBCDIC - International | | 708 | Arabic - ASMO 708 | | 709 | Arabic - ASMO 449+, BCON V4 | | 710 | Arabic - Transparent Arabic | | 720 | Arabic - Transparent ASMO | | 737 | OEM - Greek (formerly 437G) | | 775 | OEM - Baltic | | 850 | OEM - Multilingual Latin I | | 852 | OEM - Latin II | | 855 | OEM - Cyrillic (primarily Russian) | | 857 | OEM - Turkish | | 858 | OEM - Multilingual Latin I + Euro symbol | | 860 | OEM - Portuguese | | 861 | OEM - Icelandic | | 862 | OEM - Hebrew | | 863 | OEM - Canadian-French | | 864 | OEM - Arabic | | 865 | OEM - Nordic | | 866 | OEM - Russian | | 869 | OEM - Modern Greek | | 870 | IBM EBCDIC - Multilingual/ROECE (Latin-2) | | 874 | ANSI/OEM - Thai (same as 28605, ISO 8859-15) | | 875 | IBM EBCDIC - Modern Greek | | 932 | ANSI/OEM - Japanese, Shift-JIS | | 936 | ANSI/OEM - Simplified Chinese (PRC, Singapore) | | 949 | ANSI/OEM - Korean (Unified Hangul Code) | | 950 | ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC) | | 1026 | IBM EBCDIC - Turkish (Latin-5) | | 1047 | IBM EBCDIC - Latin 1/Open System | | 1140 | IBM EBCDIC - U.S./Canada (037 + Euro symbol) | | 1141 | IBM EBCDIC - Germany (20273 + Euro symbol) | | 1142 | IBM EBCDIC - Denmark/Norway (20277 + Euro symbol) | | 1143 | IBM EBCDIC - Finland/Sweden (20278 + Euro symbol) | | 1144 | IBM EBCDIC - Italy (20280 + Euro symbol) | | 1145 | IBM EBCDIC - Latin America/Spain (20284 + Euro symbol) | | 1146 | IBM EBCDIC - United Kingdom (20285 + Euro symbol) | | 1147 | IBM EBCDIC - France (20297 + Euro symbol) | | 1148 | IBM EBCDIC - International (500 + Euro symbol) | | 1149 | IBM EBCDIC - Icelandic (20871 + Euro symbol) | | 1200 | Unicode UCS-2 Little-Endian (BMP of ISO 10646) | | 1201 | Unicode UCS-2 Big-Endian | | 1250 | ANSI - Central European | | 1251 | ANSI - Cyrillic | | 1252 | ANSI - Latin I | | 1253 | ANSI - Greek | | 1254 | ANSI - Turkish | | 1255 | ANSI - Hebrew | | 1256 | ANSI - Arabic | | 1257 | ANSI - Baltic | | 1258 | ANSI/OEM - Vietnamese | | 1361 | Korean (Johab) | | 10000 | MAC - Roman | | 10001 | MAC - Japanese | | 10002 | MAC - Traditional Chinese (Big5) | | 10003 | MAC - Korean | | 10004 | MAC - Arabic | | 10005 | MAC - Hebrew | | 10006 | MAC - Greek I | | 10007 | MAC - Cyrillic | | 10008 | MAC - Simplified Chinese (GB 2312) | | 10010 | MAC - Romania | | 10017 | MAC - Ukraine | | 10021 | MAC - Thai | | 10029 | MAC - Latin II | | 10079 | MAC - Icelandic | | 10081 | MAC - Turkish | | 10082 | MAC - Croatia | | 12000 | Unicode UCS-4 Little-Endian | | 12001 | Unicode UCS-4 Big-Endian | | 20000 | CNS - Taiwan | | 20001 | TCA - Taiwan | | 20002 | Eten - Taiwan | | 20003 | IBM5550 - Taiwan | | 20004 | TeleText - Taiwan | | 20005 | Wang - Taiwan | | 20105 | IA5 IRV International Alphabet No. 5 (7-bit) | | 20106 | IA5 German (7-bit) | | 20107 | IA5 Swedish (7-bit) | | 20108 | IA5 Norwegian (7-bit) | | 20127 | US-ASCII (7-bit) | | 20261 | T.61 | | 20269 | ISO 6937 Non-Spacing Accent | | 20273 | IBM EBCDIC - Germany | | 20277 | IBM EBCDIC - Denmark/Norway | | 20278 | IBM EBCDIC - Finland/Sweden | | 20280 | IBM EBCDIC - Italy | | 20284 | IBM EBCDIC - Latin America/Spain | | 20285 | IBM EBCDIC - United Kingdom | | 20290 | IBM EBCDIC - Japanese Katakana Extended | | 20297 | IBM EBCDIC - France | | 20420 | IBM EBCDIC - Arabic | | 20423 | IBM EBCDIC - Greek | | 20424 | IBM EBCDIC - Hebrew | | 20833 | IBM EBCDIC - Korean Extended | | 20838 | IBM EBCDIC - Thai | | 20866 | Russian - KOI8-R | | 20871 | IBM EBCDIC - Icelandic | | 20880 | IBM EBCDIC - Cyrillic (Russian) | | 20905 | IBM EBCDIC - Turkish | | 20924 | IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol) | | 20932 | JIS X 0208-1990 & 0121-1990 | | 20936 | Simplified Chinese (GB2312) | | 21025 | IBM EBCDIC - Cyrillic (Serbian, Bulgarian) | | 21027 | Extended Alpha Lowercase | | 21866 | Ukrainian (KOI8-U) | | 28591 | ISO 8859-1 Latin I | | 28592 | ISO 8859-2 Central Europe | | 28593 | ISO 8859-3 Latin 3 | | 28594 | ISO 8859-4 Baltic | | 28595 | ISO 8859-5 Cyrillic | | 28596 | ISO 8859-6 Arabic | | 28597 | ISO 8859-7 Greek | | 28598 | ISO 8859-8 Hebrew | | 28599 | ISO 8859-9 Latin 5 | | 28605 | ISO 8859-15 Latin 9 | | 29001 | Europa 3 | | 38598 | ISO 8859-8 Hebrew | | 50220 | ISO 2022 Japanese with no halfwidth Katakana | | 50221 | ISO 2022 Japanese with halfwidth Katakana | | 50222 | ISO 2022 Japanese JIS X 0201-1989 | | 50225 | ISO 2022 Korean | | 50227 | ISO 2022 Simplified Chinese | | 50229 | ISO 2022 Traditional Chinese | | 50930 | Japanese (Katakana) Extended | | 50931 | US/Canada and Japanese | | 50933 | Korean Extended and Korean | | 50935 | Simplified Chinese Extended and Simplified Chinese | | 50936 | Simplified Chinese | | 50937 | US/Canada and Traditional Chinese | | 50939 | Japanese (Latin) Extended and Japanese | | 51932 | EUC - Japanese | | 51936 | EUC - Simplified Chinese | | 51949 | EUC - Korean | | 51950 | EUC - Traditional Chinese | | 52936 | HZ-GB2312 Simplified Chinese | | 54936 | Windows XP: GB18030 Simplified Chinese (4 Byte) | | 57002 | ISCII Devanagari | | 57003 | ISCII Bengali | | 57004 | ISCII Tamil | | 57005 | ISCII Telugu | | 57006 | ISCII Assamese | | 57007 | ISCII Oriya | | 57008 | ISCII Kannada | | 57009 | ISCII Malayalam | | 57010 | ISCII Gujarati | | 57011 | ISCII Punjabi | | 65000 | Unicode UTF-7 | | 65001 | Unicode UTF-8 | The following is a list of valid code page identifiers for Mac OS only: | | | | --- | --- | | Identifier | Name | | 1 | ASCII | | 2 | NEXTSTEP | | 3 | JapaneseEUC | | 4 | UTF8 | | 5 | ISOLatin1 | | 6 | Symbol | | 7 | NonLossyASCII | | 8 | ShiftJIS | | 9 | ISOLatin2 | | 10 | Unicode | | 11 | WindowsCP1251 | | 12 | WindowsCP1252 | | 13 | WindowsCP1253 | | 14 | WindowsCP1254 | | 15 | WindowsCP1250 | | 21 | ISO2022JP | | 30 | MacOSRoman | | 10 | UTF16String | | 0x90000100 | UTF16BigEndian | | 0x94000100 | UTF16LittleEndian | | 0x8c000100 | UTF32String | | 0x98000100 | UTF32BigEndian | | 0x9c000100 | UTF32LittleEndian | | 65536 | Proprietary | **LicenseInfo**: Information about the current license.When queried, this setting will return a string containing information about the license this instance of a class is using. It will return the following information: - Product: The product the license is for. - Product Key: The key the license was generated from. - License Source: Where the license was found (e.g., RuntimeLicense, License File). - License Type: The type of license installed (e.g., Royalty Free, Single Server). - Last Valid Build: The last valid build number for which the license will work. **MaskSensitiveData**: Whether sensitive data is masked in log messages.In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to *true* to mask sensitive data. The default is *true*. **UseInternalSecurityAPI**: Whether or not to use the system security libraries or an internal implementation. When set to *false*, the class will use the system security libraries by default to perform cryptographic functions where applicable. Setting this configuration setting to *true* tells the class to use the internal implementation instead of using the system security libraries. This setting is set to *false* by default on all platforms. # Trappable Errors ([RADIUS](#radius-module) Module) ### RADIUS Errors | | | | --- | --- | | 900 | Busy performing other action. | | 901 | Received invalid response. | | 902 | Received rejected response. | | 903 | Received challenge response. | ### UDP Errors | | | | --- | --- | | 104 | UDP is already Active. | | 106 | You cannot change the [LocalPort](#localport-property-radius-module) while the class is Active. | | 107 | You cannot change the [LocalHost](#localhost-property-radius-module) at this time. A connection is in progress. | | 109 | The class must be Active for this operation. | | 112 | You cannot change [MaxPacketSize](#MaxPacketSize) while the class is Active. | | 113 | You cannot change [ShareLocalPort](#ShareLocalPort) option while the class is Active. | | 114 | You cannot change [RemoteHost](#remotehost-property-radius-module) when [UseConnection](#UseConnection) is set and the class Active. | | 115 | You cannot change [RemotePort](#remoteport-property-radius-module) when [UseConnection](#UseConnection) is set and the class is Active. | | 116 | [RemotePort](#remoteport-property-radius-module) cannot be zero when [UseConnection](#UseConnection) is set. Please specify a valid service port number. | | 117 | You cannot change [UseConnection](#UseConnection) while the class is Active. | | 118 | Message cannot be longer than [MaxPacketSize](#MaxPacketSize). | | 119 | Message too short. | | 434 | Unable to convert string to selected CodePage. | ### TCP/IP Errors | | | | --- | --- | | 10004 | [10004] Interrupted system call. | | 10009 | [10009] Bad file number. | | 10013 | [10013] Access denied. | | 10014 | [10014] Bad address. | | 10022 | [10022] Invalid argument. | | 10024 | [10024] Too many open files. | | 10035 | [10035] Operation would block. | | 10036 | [10036] Operation now in progress. | | 10037 | [10037] Operation already in progress. | | 10038 | [10038] Socket operation on nonsocket. | | 10039 | [10039] Destination address required. | | 10040 | [10040] Message is too long. | | 10041 | [10041] Protocol wrong type for socket. | | 10042 | [10042] Bad protocol option. | | 10043 | [10043] Protocol is not supported. | | 10044 | [10044] Socket type is not supported. | | 10045 | [10045] Operation is not supported on socket. | | 10046 | [10046] Protocol family is not supported. | | 10047 | [10047] Address family is not supported by protocol family. | | 10048 | [10048] Address already in use. | | 10049 | [10049] Cannot assign requested address. | | 10050 | [10050] Network is down. | | 10051 | [10051] Network is unreachable. | | 10052 | [10052] Net dropped connection or reset. | | 10053 | [10053] Software caused connection abort. | | 10054 | [10054] Connection reset by peer. | | 10055 | [10055] No buffer space available. | | 10056 | [10056] Socket is already connected. | | 10057 | [10057] Socket is not connected. | | 10058 | [10058] Cannot send after socket shutdown. | | 10059 | [10059] Too many references, cannot splice. | | 10060 | [10060] Connection timed out. | | 10061 | [10061] Connection refused. | | 10062 | [10062] Too many levels of symbolic links. | | 10063 | [10063] File name is too long. | | 10064 | [10064] Host is down. | | 10065 | [10065] No route to host. | | 10066 | [10066] Directory is not empty | | 10067 | [10067] Too many processes. | | 10068 | [10068] Too many users. | | 10069 | [10069] Disc Quota Exceeded. | | 10070 | [10070] Stale NFS file handle. | | 10071 | [10071] Too many levels of remote in path. | | 10091 | [10091] Network subsystem is unavailable. | | 10092 | [10092] WINSOCK DLL Version out of range. | | 10093 | [10093] Winsock is not loaded yet. | | 11001 | [11001] Host not found. | | 11002 | [11002] Nonauthoritative 'Host not found' (try again or check DNS setup). | | 11003 | [11003] Nonrecoverable errors: FORMERR, REFUSED, NOTIMP. | | 11004 | [11004] Valid name, no data record (check DNS setup). |