# SNMPTrapMgr Component The SNMPTrapMgr component provides a UDP-based listening point for SNMP traps. ## Syntax ```text TipnSNMPTrapMgr ``` ## Remarks The SNMPTrapMgr component provides a UDP-based listening point for SNMP traps and informs as specified by the SNMP RFCs. The component supports v1, v2c, and v3 traps. SNMP over DTLS is also supported when [SSLEnabled](#sslenabled-property-snmptrapmgr-component) is set to True. The **SSLCert** properties are used to select a certificate for the server. The [SSLStatus](#sslstatus-event-snmptrapmgr-component) event provides information about the DTLS handshake. When client authentication is required, the [SSLAuthenticateClients](#sslauthenticateclients-property-snmptrapmgr-component) property can be set to True and the [SSLClientAuthentication](#sslclientauthentication-event-snmptrapmgr-component) event can be used to examine client credentials. The component provides both encoding/decoding and transport capabilities, making the task of developing a custom SNMP Trap manager as simple as setting a few key properties and handling a few events. SNMP data, such as for instance SNMP object id-s (OID-s) are exchanged as text strings, thus further simplifying the task of handling them. The component is activated/deactivated by calling the [Activate](#activate-method-snmptrapmgr-component) or [Deactivate](#deactivate-method-snmptrapmgr-component) method. These methods enable or disable sending and receiving. The activation status can be found in the [Active](#active-property-snmptrapmgr-component) property. Messages are received through events such as [Trap](#trap-event-snmptrapmgr-component), [InformRequest](#informrequest-event-snmptrapmgr-component), or [DiscoveryRequest](#discoveryrequest-event-snmptrapmgr-component). SNMP OIDs, types, and values are provided in the Objects collection of SNMP objects for both sent and received packets. SNMPv3 USM security passwords are requested through the [GetUserPassword](#getuserpassword-event-snmptrapmgr-component) event, and event parameters such as *User* and *SecurityLevel* provide information about the security attributes of received requests, and enable granular decision capability about what to provide and what not to provide. The [AddUser](#adduser-method-snmptrapmgr-component), [RemoveUser](#removeuser-method-snmptrapmgr-component), [ShowCache](#showcache-method-snmptrapmgr-component), [ClearCache](#clearcache-method-snmptrapmgr-component), [AddEngine](#addengine-method-snmptrapmgr-component), and [RemoveEngine](#removeengine-method-snmptrapmgr-component) methods are used to manage an internal authentication cache. This internal cache can be used as an alternative to the [GetUserPassword](#getuserpassword-event-snmptrapmgr-component) event, automatically checking the cache against the security parameters provided in the request signature. ## Property List *The following is the full list of the properties of the component with short descriptions. Click on the links for further details.* | | | | --- | --- | | [AcceptData](#acceptdata-property-snmptrapmgr-component) | Enables or disables data reception. | | [Active](#active-property-snmptrapmgr-component) | Indicates whether the component is active. | | [LocalEngineId](#localengineid-property-snmptrapmgr-component) | The Engine Id (for SNMPv3). | | [LocalHost](#localhost-property-snmptrapmgr-component) | The name of the local host or user-assigned IP interface through which connections are initiated or accepted. | | [LocalPort](#localport-property-snmptrapmgr-component) | The port in the local host where the component is bound to. | | [ObjCount](#objcount-property-snmptrapmgr-component) | The number of records in the Obj arrays. | | [ObjType](#objtype-property-snmptrapmgr-component) | The current object's type. | | [ObjId](#objid-property-snmptrapmgr-component) | The current object's id which is encoded as a string of numbers separated by periods. | | [ObjTypeString](#objtypestring-property-snmptrapmgr-component) | A string representation of the current object's ObjectType . | | [ObjValue](#objvalue-property-snmptrapmgr-component) | The current object's value. | | [RequestId](#requestid-property-snmptrapmgr-component) | The request-id to mark outgoing packets with. | | [SSLAuthenticateClients](#sslauthenticateclients-property-snmptrapmgr-component) | If set to True, the server asks the client(s) for a certificate. | | [SSLCertEffectiveDate](#sslcerteffectivedate-property-snmptrapmgr-component) | The date on which this certificate becomes valid. | | [SSLCertExpirationDate](#sslcertexpirationdate-property-snmptrapmgr-component) | The date on which the certificate expires. | | [SSLCertExtendedKeyUsage](#sslcertextendedkeyusage-property-snmptrapmgr-component) | A comma-delimited list of extended key usage identifiers. | | [SSLCertFingerprint](#sslcertfingerprint-property-snmptrapmgr-component) | The hex-encoded, 16-byte MD5 fingerprint of the certificate. | | [SSLCertFingerprintSHA1](#sslcertfingerprintsha1-property-snmptrapmgr-component) | The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. | | [SSLCertFingerprintSHA256](#sslcertfingerprintsha256-property-snmptrapmgr-component) | The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. | | [SSLCertIssuer](#sslcertissuer-property-snmptrapmgr-component) | The issuer of the certificate. | | [SSLCertPrivateKey](#sslcertprivatekey-property-snmptrapmgr-component) | The private key of the certificate (if available). | | [SSLCertPrivateKeyAvailable](#sslcertprivatekeyavailable-property-snmptrapmgr-component) | Whether a PrivateKey is available for the selected certificate. | | [SSLCertPrivateKeyContainer](#sslcertprivatekeycontainer-property-snmptrapmgr-component) | The name of the PrivateKey container for the certificate (if available). | | [SSLCertPublicKey](#sslcertpublickey-property-snmptrapmgr-component) | The public key of the certificate. | | [SSLCertPublicKeyAlgorithm](#sslcertpublickeyalgorithm-property-snmptrapmgr-component) | The textual description of the certificate's public key algorithm. | | [SSLCertPublicKeyLength](#sslcertpublickeylength-property-snmptrapmgr-component) | The length of the certificate's public key (in bits). | | [SSLCertSerialNumber](#sslcertserialnumber-property-snmptrapmgr-component) | The serial number of the certificate encoded as a string. | | [SSLCertSignatureAlgorithm](#sslcertsignaturealgorithm-property-snmptrapmgr-component) | The text description of the certificate's signature algorithm. | | [SSLCertStore](#sslcertstore-property-snmptrapmgr-component) | The name of the certificate store for the client certificate. | | [SSLCertStorePassword](#sslcertstorepassword-property-snmptrapmgr-component) | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. | | [SSLCertStoreType](#sslcertstoretype-property-snmptrapmgr-component) | The type of certificate store for this certificate. | | [SSLCertSubjectAltNames](#sslcertsubjectaltnames-property-snmptrapmgr-component) | Comma-separated lists of alternative subject names for the certificate. | | [SSLCertThumbprintMD5](#sslcertthumbprintmd5-property-snmptrapmgr-component) | The MD5 hash of the certificate. | | [SSLCertThumbprintSHA1](#sslcertthumbprintsha1-property-snmptrapmgr-component) | The SHA-1 hash of the certificate. | | [SSLCertThumbprintSHA256](#sslcertthumbprintsha256-property-snmptrapmgr-component) | The SHA-256 hash of the certificate. | | [SSLCertUsage](#sslcertusage-property-snmptrapmgr-component) | The text description of UsageFlags . | | [SSLCertUsageFlags](#sslcertusageflags-property-snmptrapmgr-component) | The flags that show intended use for the certificate. | | [SSLCertVersion](#sslcertversion-property-snmptrapmgr-component) | The certificate's version number. | | [SSLCertSubject](#sslcertsubject-property-snmptrapmgr-component) | The subject of the certificate used for client authentication. | | [SSLCertEncoded](#sslcertencoded-property-snmptrapmgr-component) | The certificate (PEM/Base64 encoded). | | [SSLEnabled](#sslenabled-property-snmptrapmgr-component) | Whether DTLS is enabled. | ## Method List *The following is the full list of the methods of the component with short descriptions. Click on the links for further details.* | | | | --- | --- | | [Activate](#activate-method-snmptrapmgr-component) | Activates the component. | | [AddEngine](#addengine-method-snmptrapmgr-component) | Adds the engine specified by EngineId to the internal authentication cache. | | [AddUser](#adduser-method-snmptrapmgr-component) | Adds a user for the engine specified by EngineId to the internal authentication cache. | | [ClearCache](#clearcache-method-snmptrapmgr-component) | Clears the internal authentication database. | | [Config](#config-method-snmptrapmgr-component) | Sets or retrieves a configuration setting. | | [Deactivate](#deactivate-method-snmptrapmgr-component) | Deactivates the component. | | [DoEvents](#doevents-method-snmptrapmgr-component) | This method processes events from the internal message queue. | | [HashPasswords](#hashpasswords-method-snmptrapmgr-component) | Hashes all passwords in the cache. | | [PauseData](#pausedata-method-snmptrapmgr-component) | This method pauses data reception. | | [ProcessData](#processdata-method-snmptrapmgr-component) | This method reenables data reception after a call to PauseData . | | [RemoveEngine](#removeengine-method-snmptrapmgr-component) | Removes the engine specified by EngineId from the internal authentication cache. | | [RemoveUser](#removeuser-method-snmptrapmgr-component) | Removes the user specified by User of the engine specified by EngineId from the internal authentication cache. | | [Reset](#reset-method-snmptrapmgr-component) | Clears the object arrays. | | [ShowCache](#showcache-method-snmptrapmgr-component) | Lists all entries in the internal user and engine database. | | [Value](#value-method-snmptrapmgr-component) | Returns the value corresponding to an OID. | ## Event List *The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.* | | | | --- | --- | | [BadPacket](#badpacket-event-snmptrapmgr-component) | Fired for erroneous and/or malformed messages. | | [CacheEntry](#cacheentry-event-snmptrapmgr-component) | Shows engines and users in the internal cache. | | [CheckEngine](#checkengine-event-snmptrapmgr-component) | Fired to check engine parameters (timeliness, etc.). | | [Connected](#connected-event-snmptrapmgr-component) | Fired immediately after a connection completes (or fails). | | [Disconnected](#disconnected-event-snmptrapmgr-component) | Fired when a connection is closed. | | [DiscoveryRequest](#discoveryrequest-event-snmptrapmgr-component) | Fired when an SNMPv3 discovery packet is received. | | [Error](#error-event-snmptrapmgr-component) | Fired when information is available about errors during data delivery. | | [GetUserPassword](#getuserpassword-event-snmptrapmgr-component) | Retrieves a password associated with a user. | | [GetUserSecurityLevel](#getusersecuritylevel-event-snmptrapmgr-component) | Sets the security level for an incoming packet. | | [HashPassword](#hashpassword-event-snmptrapmgr-component) | Fired before and after a password is hashed. | | [InformRequest](#informrequest-event-snmptrapmgr-component) | Fired when an InformRequest packet is received. | | [PacketTrace](#packettrace-event-snmptrapmgr-component) | Fired for every packet sent or received. | | [SSLClientAuthentication](#sslclientauthentication-event-snmptrapmgr-component) | Fired when the client presents its credentials to the server. | | [SSLStatus](#sslstatus-event-snmptrapmgr-component) | Shows the progress of the secure connection. | | [Trap](#trap-event-snmptrapmgr-component) | Fired when a SNMP trap packet is received. | ## Config Settings *The following is a list of config settings for the component with short descriptions. Click on the links for further details.* | | | | --- | --- | | [AuthenticationKey](#AuthenticationKey) | The key to use for authentication. | | [CompatibilityMode](#CompatibilityMode) | Whether to operate the component in a specific compatibility mode. | | [ContextEngineId](#ContextEngineId) | Sets the context engine id of the SNMP entity. | | [ContextName](#ContextName) | Sets the context name of the SNMP entity. | | [DecryptLogPackets](#DecryptLogPackets) | Whether to decrypt logged packets. | | [EncryptionKey](#EncryptionKey) | The key to use for encryption. | | [ForceLocalPort](#ForceLocalPort) | Forces the component to bind to a specific port. | | [IncomingContextEngineId](#IncomingContextEngineId) | The engine Id of the received packet. | | [IncomingContextName](#IncomingContextName) | The context name of the received packet. | | [ShowCacheForUser](#ShowCacheForUser) | Shows the cache entry for a single user. | | [SourceAddress](#SourceAddress) | The source address of the received packet. | | [SourcePort](#SourcePort) | The source port of the received packet. | | [TimeWindow](#TimeWindow) | The time window used for SNMPv3 timeliness checking (authentication). | | [CaptureIPPacketInfo](#CaptureIPPacketInfo) | Used to capture the packet information. | | [DelayHostResolution](#DelayHostResolution) | Whether the hostname is resolved when RemoteHost is set. | | [DestinationAddress](#DestinationAddress) | Used to get the destination address from the packet information. | | [DontFragment](#DontFragment) | Used to set the Don't Fragment flag of outgoing packets. | | [LocalHost](#LocalHost) | The name of the local host through which connections are initiated or accepted. | | [LocalPort](#LocalPort) | The port in the local host where the component binds. | | [MaxPacketSize](#MaxPacketSize) | The maximum length of the packets that can be received. | | [QOSDSCPValue](#QOSDSCPValue) | Used to specify an arbitrary QOS/DSCP setting (optional). | | [QOSTrafficType](#QOSTrafficType) | Used to specify QOS/DSCP settings (optional). | | [ShareLocalPort](#ShareLocalPort) | If set to True, allows more than one instance of the component to be active on the same local port. | | [UseConnection](#UseConnection) | Determines whether to use a connected socket. | | [UseIPv6](#UseIPv6) | Whether or not to use IPv6. | | [AbsoluteTimeout](#AbsoluteTimeout) | Determines whether timeouts are inactivity timeouts or absolute timeouts. | | [FirewallData](#FirewallData) | Used to send extra data to the firewall. | | [InBufferSize](#InBufferSize) | The size in bytes of the incoming queue of the socket. | | [OutBufferSize](#OutBufferSize) | The size in bytes of the outgoing queue of the socket. | | [BuildInfo](#BuildInfo) | Information about the product's build. | | [CodePage](#CodePage) | The system code page used for Unicode to Multibyte translations. | | [LicenseInfo](#LicenseInfo) | Information about the current license. | | [MaskSensitiveData](#MaskSensitiveData) | Whether sensitive data is masked in log messages. | | [UseInternalSecurityAPI](#UseInternalSecurityAPI) | Whether or not to use the system security libraries or an internal implementation. | # AcceptData Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) Enables or disables data reception. ## Syntax *C++ Builder Syntax* ```text __property bool AcceptData = { read=FAcceptData }; ``` ## Default Value True ## Remarks Setting the property to False temporarily disables data reception. Setting the property to True re-enables data reception. This property is read-only and not available at design time. ## Data Type Boolean # Active Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) Indicates whether the component is active. ## Syntax *C++ Builder Syntax* ```text __property bool Active = { read=FActive }; ``` ## Default Value False ## Remarks This property indicates whether the component is currently active and can send or receive data. The component will be automatically activated if it is not already and you attempt to perform an operation which requires the component to be active. Use the [Activate](#activate-method-snmptrapmgr-component) and [Deactivate](#deactivate-method-snmptrapmgr-component) methods to control whether the component is active. This property is read-only and not available at design time. ## Data Type Boolean # LocalEngineId Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The Engine Id (for SNMPv3). ## Syntax *C++ Builder Syntax* ```text __property String LocalEngineId = { read=FLocalEngineId, write=FSetLocalEngineId }; __property DynamicArray LocalEngineIdB = { read=FLocalEngineIdB, write=FSetLocalEngineIdB }; ``` ## Default Value "" ## Remarks This property is necessary for properly handling [InformRequest](#informrequest-event-snmptrapmgr-component) packets. ## Data Type Byte Array # LocalHost Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The name of the local host or user-assigned IP interface through which connections are initiated or accepted. ## Syntax *C++ Builder Syntax* ```text __property String LocalHost = { read=FLocalHost, write=FSetLocalHost }; ``` ## Default Value "" ## Remarks This property contains the name of the local host as obtained by the *gethostname()* system call, or if the user has assigned an IP address, the value of that address. In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the component initiate connections (or accept in the case of server components) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used. If the component is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface). NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window. ## Data Type String # LocalPort Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The port in the local host where the component is bound to. ## Syntax *C++ Builder Syntax* ```text __property int LocalPort = { read=FLocalPort, write=FSetLocalPort }; ``` ## Default Value 162 ## Remarks The LocalPort property must be set before the component is activated ([Active](#active-property-snmptrapmgr-component) is set to True). It instructs the component to bind to a specific port (or communication endpoint) in the local machine. The default port is 162 (standard trap port). If that port is busy, an error will be returned, unless the [ForceLocalPort](#ForceLocalPort) configuration setting is set to False, in which case a random port will be chosen. LocalPort cannot be changed once the component is [Active](#active-property-snmptrapmgr-component). Any attempt to set the LocalPort property when the component is [Active](#active-property-snmptrapmgr-component) will generate an error. NOTE: on macOS and iOS, root permissions are required to set LocalPort to any value below 1024. ## Data Type Integer # ObjCount Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The number of records in the Obj arrays. ## Syntax *C++ Builder Syntax* ```text __property int ObjCount = { read=FObjCount, write=FSetObjCount }; ``` ## Default Value 0 ## Remarks This property controls the size of the following arrays: - [ObjId](#objid-property-snmptrapmgr-component) - [ObjType](#objtype-property-snmptrapmgr-component) - [ObjTypeString](#objtypestring-property-snmptrapmgr-component) - [ObjValue](#objvalue-property-snmptrapmgr-component) The array indices start at *0* and end at *ObjCount - 1*. This property is not available at design time. ## Data Type Integer # ObjType Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The current object's type. ## Syntax *C++ Builder Syntax* ```text __property TipnSNMPTrapMgrObjTypes ObjType[int ObjIndex] = { read=FObjType, write=FSetObjType }; enum TipnSNMPTrapMgrObjTypes { otInteger=2, otOctetString=4, otNull=5, otObjectId=6, otIPAddress=64, otCounter32=65, otGauge32=66, otTimeTicks=67, otOpaque=68, otNSAP=69, otCounter64=70, otUnsignedInteger32=71, otNoSuchObject=128, otNoSuchInstance=129, otEndOfMibView=130 }; ``` ## Default Value otNull ## Remarks The current object's type. The default type is NULL (5). The corresponding object id and value are specified by the [ObjOid](#SNMPTrapMgr_p_ObjOid) and [ObjValue](#objvalue-property-snmptrapmgr-component) properties. Possible object type values include: | | | | --- | --- | | otInteger (2) | 2 | | otOctetString (4) | 4 | | otNull (5) | 5 | | otObjectID (6) | 6 | | otIPAddress (64) | 64 | | otCounter32 (65) | 65 | | otGauge32 (66) | 66 | | otTimeTicks (67) | 67 | | otOpaque (68) | 68 | | otNSAP (69) | 69 | | otCounter64 (70) | 70 | | otUnsignedInteger32 (71) | 71 | The component also supports the following artificial object values used to designate error conditions: | | | | --- | --- | | otNoSuchObject (128) | No such object error. | | otNoSuchInstance (129) | No such instance error. | | otEndOfMibView (130) | End of MIB View error. | The *ObjIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ObjCount](#objcount-property-snmptrapmgr-component) property. This property is not available at design time. ## Data Type Integer # ObjId Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The current object's id which is encoded as a string of numbers separated by periods. ## Syntax *C++ Builder Syntax* ```text __property String ObjId[int ObjIndex] = { read=FObjId, write=FSetObjId }; ``` ## Default Value "" ## Remarks The current object's id which is encoded as a string of numbers separated by periods. For instance: "1.3.6.1.2.1.1.1.0" (OID for "system description"). The corresponding object type and value (if any) are specified by the [ObjectType](#SNMPTrapMgr_p_ObjectType) and [ObjValue](#objvalue-property-snmptrapmgr-component) properties. **Example** ```text SNMPControl.ObjCount = 1 SNMPControl.ObjId(0) = "1.3.6.1.2.1.1.1.0" ``` The *ObjIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ObjCount](#objcount-property-snmptrapmgr-component) property. This property is not available at design time. ## Data Type String # ObjTypeString Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) A string representation of the current object's ObjectType . ## Syntax *C++ Builder Syntax* ```text __property String ObjTypeString[int ObjIndex] = { read=FObjTypeString }; ``` ## Default Value "" ## Remarks A string representation of the current object's [ObjectType](#SNMPTrapMgr_p_ObjectType). The corresponding object id and value are specified by the [ObjOid](#SNMPTrapMgr_p_ObjOid) and [ObjValue](#objvalue-property-snmptrapmgr-component) properties. The *ObjIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ObjCount](#objcount-property-snmptrapmgr-component) property. This property is read-only and not available at design time. ## Data Type String # ObjValue Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The current object's value. ## Syntax *C++ Builder Syntax* ```text __property String ObjValue[int ObjIndex] = { read=FObjValue, write=FSetObjValue }; __property DynamicArray ObjValueB[int ObjIndex] = { read=FObjValueB, write=FSetObjValueB }; ``` ## Default Value "" ## Remarks The current object's value. The corresponding object id and type are specified by the [ObjOid](#SNMPTrapMgr_p_ObjOid) and [ObjectType](#SNMPTrapMgr_p_ObjectType) properties. **Example** ```text SNMPControl.ObjCount = 1 SNMPControl.ObjId(0) = "1.3.6.1.2.1.1.1.0" SNMPControl.ObjValue(0) = "New Value" ``` The *ObjIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ObjCount](#objcount-property-snmptrapmgr-component) property. This property is not available at design time. ## Data Type Byte Array # RequestId Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The request-id to mark outgoing packets with. ## Syntax *C++ Builder Syntax* ```text __property int RequestId = { read=FRequestId, write=FSetRequestId }; ``` ## Default Value 1 ## Remarks If a custom value is needed for RequestId, the property must be set before sending the request. The component increments RequestId automatically after sending each packet. This property is not available at design time. ## Data Type Integer # SSLAuthenticateClients Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) If set to True, the server asks the client(s) for a certificate. ## Syntax *C++ Builder Syntax* ```text __property bool SSLAuthenticateClients = { read=FSSLAuthenticateClients, write=FSetSSLAuthenticateClients }; ``` ## Default Value false ## Remarks This property is used in conjunction with the [SSLClientAuthentication](#sslclientauthentication-event-snmptrapmgr-component) event. Please refer to the documentation of the [SSLClientAuthentication](#sslclientauthentication-event-snmptrapmgr-component) event for details. ## Data Type Boolean # SSLCertEffectiveDate Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The date on which this certificate becomes valid. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertEffectiveDate = { read=FSSLCertEffectiveDate }; ``` ## Default Value "" ## Remarks The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date: 23-Jan-2000 15:00:00. This property is read-only. ## Data Type String # SSLCertExpirationDate Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The date on which the certificate expires. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertExpirationDate = { read=FSSLCertExpirationDate }; ``` ## Default Value "" ## Remarks The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date: 23-Jan-2001 15:00:00. This property is read-only. ## Data Type String # SSLCertExtendedKeyUsage Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) A comma-delimited list of extended key usage identifiers. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertExtendedKeyUsage = { read=FSSLCertExtendedKeyUsage }; ``` ## Default Value "" ## Remarks A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs). This property is read-only. ## Data Type String # SSLCertFingerprint Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The hex-encoded, 16-byte MD5 fingerprint of the certificate. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertFingerprint = { read=FSSLCertFingerprint }; ``` ## Default Value "" ## Remarks The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys. The following example illustrates the format: *bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02* This property is read-only. ## Data Type String # SSLCertFingerprintSHA1 Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertFingerprintSHA1 = { read=FSSLCertFingerprintSHA1 }; ``` ## Default Value "" ## Remarks The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys. The following example illustrates the format: *30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84* This property is read-only. ## Data Type String # SSLCertFingerprintSHA256 Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertFingerprintSHA256 = { read=FSSLCertFingerprintSHA256 }; ``` ## Default Value "" ## Remarks The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys. The following example illustrates the format: *6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53* This property is read-only. ## Data Type String # SSLCertIssuer Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The issuer of the certificate. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertIssuer = { read=FSSLCertIssuer }; ``` ## Default Value "" ## Remarks The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate. This property is read-only. ## Data Type String # SSLCertPrivateKey Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The private key of the certificate (if available). ## Syntax *C++ Builder Syntax* ```text __property String SSLCertPrivateKey = { read=FSSLCertPrivateKey }; ``` ## Default Value "" ## Remarks The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data. NOTE: The [SSLCertPrivateKey](#sslcertprivatekey-property-snmptrapmgr-component) may be available but not exportable. In this case, [SSLCertPrivateKey](#sslcertprivatekey-property-snmptrapmgr-component) returns an empty string. This property is read-only. ## Data Type String # SSLCertPrivateKeyAvailable Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) Whether a PrivateKey is available for the selected certificate. ## Syntax *C++ Builder Syntax* ```text __property bool SSLCertPrivateKeyAvailable = { read=FSSLCertPrivateKeyAvailable }; ``` ## Default Value false ## Remarks Whether a [SSLCertPrivateKey](#sslcertprivatekey-property-snmptrapmgr-component) is available for the selected certificate. If [SSLCertPrivateKeyAvailable](#sslcertprivatekeyavailable-property-snmptrapmgr-component) is True, the certificate may be used for authentication purposes (e.g., server authentication). This property is read-only. ## Data Type Boolean # SSLCertPrivateKeyContainer Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The name of the PrivateKey container for the certificate (if available). ## Syntax *C++ Builder Syntax* ```text __property String SSLCertPrivateKeyContainer = { read=FSSLCertPrivateKeyContainer }; ``` ## Default Value "" ## Remarks The name of the [SSLCertPrivateKey](#sslcertprivatekey-property-snmptrapmgr-component) container for the certificate (if available). This functionality is available only on Windows platforms. This property is read-only. ## Data Type String # SSLCertPublicKey Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The public key of the certificate. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertPublicKey = { read=FSSLCertPublicKey }; ``` ## Default Value "" ## Remarks The public key of the certificate. The key is provided as PEM/Base64-encoded data. This property is read-only. ## Data Type String # SSLCertPublicKeyAlgorithm Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The textual description of the certificate's public key algorithm. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertPublicKeyAlgorithm = { read=FSSLCertPublicKeyAlgorithm }; ``` ## Default Value "" ## Remarks The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm. This property is read-only. ## Data Type String # SSLCertPublicKeyLength Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The length of the certificate's public key (in bits). ## Syntax *C++ Builder Syntax* ```text __property int SSLCertPublicKeyLength = { read=FSSLCertPublicKeyLength }; ``` ## Default Value 0 ## Remarks The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048. This property is read-only. ## Data Type Integer # SSLCertSerialNumber Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The serial number of the certificate encoded as a string. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertSerialNumber = { read=FSSLCertSerialNumber }; ``` ## Default Value "" ## Remarks The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number. This property is read-only. ## Data Type String # SSLCertSignatureAlgorithm Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The text description of the certificate's signature algorithm. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertSignatureAlgorithm = { read=FSSLCertSignatureAlgorithm }; ``` ## Default Value "" ## Remarks The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm. This property is read-only. ## Data Type String # SSLCertStore Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The name of the certificate store for the client certificate. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertStore = { read=FSSLCertStore, write=FSetSSLCertStore }; __property DynamicArray SSLCertStoreB = { read=FSSLCertStoreB, write=FSetSSLCertStoreB }; ``` ## Default Value "MY" ## Remarks The name of the certificate store for the client certificate. The [SSLCertStoreType](#sslcertstoretype-property-snmptrapmgr-component) property denotes the type of the certificate store specified by [SSLCertStore](#sslcertstore-property-snmptrapmgr-component). If the store is password-protected, specify the password in [SSLCertStorePassword](#sslcertstorepassword-property-snmptrapmgr-component). [SSLCertStore](#sslcertstore-property-snmptrapmgr-component) is used in conjunction with the [SSLCertSubject](#sslcertsubject-property-snmptrapmgr-component) property to specify client certificates. If [SSLCertStore](#sslcertstore-property-snmptrapmgr-component) has a value, and [SSLCertSubject](#sslcertsubject-property-snmptrapmgr-component) or [SSLCertEncoded](#sslcertencoded-property-snmptrapmgr-component) is set, a search for a certificate is initiated. Please see the [SSLCertSubject](#sslcertsubject-property-snmptrapmgr-component) property for details. Designations of certificate stores are platform dependent. The following designations are the most common User and Machine certificate stores in Windows: | | | | --- | --- | | MY | A certificate store holding personal certificates with their associated private keys. | | CA | Certifying authority certificates. | | ROOT | Root certificates. | When the certificate store type is *cstPFXFile*, this property must be set to the name of the file. When the type is *cstPFXBlob*, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store). ## Data Type Byte Array # SSLCertStorePassword Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertStorePassword = { read=FSSLCertStorePassword, write=FSetSSLCertStorePassword }; ``` ## Default Value "" ## Remarks If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. ## Data Type String # SSLCertStoreType Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The type of certificate store for this certificate. ## Syntax *C++ Builder Syntax* ```text __property TipnSNMPTrapMgrSSLCertStoreTypes SSLCertStoreType = { read=FSSLCertStoreType, write=FSetSSLCertStoreType }; enum TipnSNMPTrapMgrSSLCertStoreTypes { cstUser=0, cstMachine=1, cstPFXFile=2, cstPFXBlob=3, cstJKSFile=4, cstJKSBlob=5, cstPEMKeyFile=6, cstPEMKeyBlob=7, cstPublicKeyFile=8, cstPublicKeyBlob=9, cstSSHPublicKeyBlob=10, cstP7BFile=11, cstP7BBlob=12, cstSSHPublicKeyFile=13, cstPPKFile=14, cstPPKBlob=15, cstXMLFile=16, cstXMLBlob=17, cstJWKFile=18, cstJWKBlob=19, cstSecurityKey=20, cstBCFKSFile=21, cstBCFKSBlob=22, cstPKCS11=23, cstAuto=99 }; ``` ## Default Value cstUser ## Remarks The type of certificate store for this certificate. The component supports both public and private keys in a variety of formats. When the *cstAuto* value is used, the component will automatically determine the type. This property can take one of the following values: ```csharp sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll", "123456", // PIN "CN=cert_subject"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22); ``` ```csharp certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; // PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22); ``` | | | | --- | --- | | 0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user. NOTE: This store type is not available in Java. | | 1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store. NOTE: This store type is not available in Java. | | 2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. | | 3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. | | 4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates. NOTE: This store type is only available in Java. | | 5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. NOTE: This store type is only available in Java. | | 6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. | | 7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. | | 8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. | | 9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. | | 10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. | | 11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. | | 12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. | | 13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. | | 14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). | | 15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). | | 16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. | | 17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. | | 18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). | | 19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). | | 21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). NOTE: This store type is only available in Java and .NET. | | 22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. NOTE: This store type is only available in Java and .NET. | | 23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, create a new [Certificate](#Type_Certificate) object and pass cstPKCS11 as the [SSLCertStoreType](#sslcertstoretype-property-snmptrapmgr-component), the full path of the PKCS#11 DLL as the [SSLCertStore](#sslcertstore-property-snmptrapmgr-component), and the PIN as the [SSLCertStorePassword](#sslcertstorepassword-property-snmptrapmgr-component). Code Example. SSH Authentication with Security Key (without CertMgr): Alternatively, collect the necessary data using the [CertMgr](#CertMgr) component by calling the [ListStoreCertificates](#CertMgr_m_ListStoreCertificates) method after setting the corresponding properties accordingly. The certificate information returned in the [CertList](#CertMgr_e_CertList) event's CertEncoded parameter may be saved for later use. When using a certificate obtained with this approach, pass the previously saved security key information as the [SSLCertStore](#sslcertstore-property-snmptrapmgr-component) and set [SSLCertStorePassword](#sslcertstorepassword-property-snmptrapmgr-component) to the PIN. Code Example. SSH Authentication with Security Key (with CertMgr): | | 99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. | ## Data Type Integer # SSLCertSubjectAltNames Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) Comma-separated lists of alternative subject names for the certificate. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertSubjectAltNames = { read=FSSLCertSubjectAltNames }; ``` ## Default Value "" ## Remarks Comma-separated lists of alternative subject names for the certificate. This property is read-only. ## Data Type String # SSLCertThumbprintMD5 Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The MD5 hash of the certificate. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertThumbprintMD5 = { read=FSSLCertThumbprintMD5 }; ``` ## Default Value "" ## Remarks The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed. This property is read-only. ## Data Type String # SSLCertThumbprintSHA1 Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The SHA-1 hash of the certificate. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertThumbprintSHA1 = { read=FSSLCertThumbprintSHA1 }; ``` ## Default Value "" ## Remarks The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed. This property is read-only. ## Data Type String # SSLCertThumbprintSHA256 Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The SHA-256 hash of the certificate. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertThumbprintSHA256 = { read=FSSLCertThumbprintSHA256 }; ``` ## Default Value "" ## Remarks The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed. This property is read-only. ## Data Type String # SSLCertUsage Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The text description of UsageFlags . ## Syntax *C++ Builder Syntax* ```text __property String SSLCertUsage = { read=FSSLCertUsage }; ``` ## Default Value "" ## Remarks The text description of [SSLCertUsageFlags](#sslcertusageflags-property-snmptrapmgr-component). This value will be one or more of the following strings and will be separated by commas: - Digital Signature - Non-Repudiation - Key Encipherment - Data Encipherment - Key Agreement - Certificate Signing - CRL Signing - Encipher Only If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names. This property is read-only. ## Data Type String # SSLCertUsageFlags Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The flags that show intended use for the certificate. ## Syntax *C++ Builder Syntax* ```text __property int SSLCertUsageFlags = { read=FSSLCertUsageFlags }; ``` ## Default Value 0 ## Remarks The flags that show intended use for the certificate. The value of [SSLCertUsageFlags](#sslcertusageflags-property-snmptrapmgr-component) is a combination of the following flags: | | | | --- | --- | | 0x80 | Digital Signature | | 0x40 | Non-Repudiation | | 0x20 | Key Encipherment | | 0x10 | Data Encipherment | | 0x08 | Key Agreement | | 0x04 | Certificate Signing | | 0x02 | CRL Signing | | 0x01 | Encipher Only | Please see the [SSLCertUsage](#sslcertusage-property-snmptrapmgr-component) property for a text representation of [SSLCertUsageFlags](#sslcertusageflags-property-snmptrapmgr-component). This functionality currently is not available when the provider is OpenSSL. This property is read-only. ## Data Type Integer # SSLCertVersion Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The certificate's version number. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertVersion = { read=FSSLCertVersion }; ``` ## Default Value "" ## Remarks The certificate's version number. The possible values are the strings "V1", "V2", and "V3". This property is read-only. ## Data Type String # SSLCertSubject Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The subject of the certificate used for client authentication. ## Syntax *C++ Builder Syntax* ```text __property String SSLCertSubject = { read=FSSLCertSubject, write=FSetSSLCertSubject }; ``` ## Default Value "" ## Remarks The subject of the certificate used for client authentication. This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject. If a matching certificate is found, the property is set to the full subject of the matching certificate. If an exact match is not found, the store is searched for subjects containing the value of the property. If a match is still not found, the property is set to an empty string, and no certificate is selected. The special value "*" picks a random certificate in the certificate store. The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=example@email.com". Common fields and their meanings are as follows: | Field | Meaning | | --- | --- | | CN | Common Name. This is commonly a hostname like www.server.com. | | O | Organization | | OU | Organizational Unit | | L | Locality | | S | State | | C | Country | | E | Email Address | If a field value contains a comma, it must be quoted. ## Data Type String # SSLCertEncoded Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) The certificate (PEM/Base64 encoded). ## Syntax *C++ Builder Syntax* ```text __property String SSLCertEncoded = { read=FSSLCertEncoded, write=FSetSSLCertEncoded }; __property DynamicArray SSLCertEncodedB = { read=FSSLCertEncodedB, write=FSetSSLCertEncodedB }; ``` ## Default Value "" ## Remarks The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The [SSLCertStore](#sslcertstore-property-snmptrapmgr-component) and [SSLCertSubject](#sslcertsubject-property-snmptrapmgr-component) properties also may be used to specify a certificate. When [SSLCertEncoded](#sslcertencoded-property-snmptrapmgr-component) is set, a search is initiated in the current [SSLCertStore](#sslcertstore-property-snmptrapmgr-component) for the private key of the certificate. If the key is found, [SSLCertSubject](#sslcertsubject-property-snmptrapmgr-component) is updated to reflect the full subject of the selected certificate; otherwise, [SSLCertSubject](#sslcertsubject-property-snmptrapmgr-component) is set to an empty string. This property is not available at design time. ## Data Type Byte Array # SSLEnabled Property ([SNMPTrapMgr](#snmptrapmgr-component) Component) Whether DTLS is enabled. ## Syntax *C++ Builder Syntax* ```text __property bool SSLEnabled = { read=FSSLEnabled, write=FSetSSLEnabled }; ``` ## Default Value False ## Remarks This setting specifies whether DTLS is enabled in the component. When False (default) the component operates in plaintext mode. When True DTLS is enabled. This property is not available at design time. ## Data Type Boolean # Activate Method ([SNMPTrapMgr](#snmptrapmgr-component) Component) Activates the component. ## Syntax *C++ Builder Syntax* ```text void __fastcall Activate(); ``` ## Remarks This method activates the component and will allow it to send or receive data. The component will be automatically activated if it is not already and you attempt to perform an operation which requires the component to be active. NOTE: Use the [Active](#active-property-snmptrapmgr-component) property to check whether the component is active. # AddEngine Method ([SNMPTrapMgr](#snmptrapmgr-component) Component) Adds the engine specified by EngineId to the internal authentication cache. ## Syntax *C++ Builder Syntax* ```text void __fastcall AddEngine(DynamicArray EngineId, int EngineBoots, int EngineTime); ``` ## Remarks The internal authentication cache can be used as an alternative to the [GetUserPassword](#getuserpassword-event-snmptrapmgr-component) event, automatically checking the cache against the security parameters provided in the request signature. The [ShowCache](#showcache-method-snmptrapmgr-component) method is used to show the contents of the internal authentication cache. The [ClearCache](#clearcache-method-snmptrapmgr-component) method can be used to completely clear the cache. If the engine parameters are unknown, the [SNMPMgr](SNMPMgr.md#SNMPMgr) component's Discover method can be used to perform a discovery with the agent. The RemoteEngineId, RemoteEngineTime, and RemoteEngineBoots properties will hold the values that can then be passed to this method. # AddUser Method ([SNMPTrapMgr](#snmptrapmgr-component) Component) Adds a user for the engine specified by EngineId to the internal authentication cache. ## Syntax *C++ Builder Syntax* ```text void __fastcall AddUser(String User, DynamicArray EngineId, int AuthenticationProtocol, String AuthenticationPassword, int EncryptionAlgorithm, String EncryptionPassword); ``` ## Remarks The internal authentication cache can be used as an alternative to the [GetUserPassword](#getuserpassword-event-snmptrapmgr-component) event, automatically checking the cache against the security parameters provided in the request signature. The [ShowCache](#showcache-method-snmptrapmgr-component) method is used to show the contents of the internal authentication cache. The [ClearCache](#clearcache-method-snmptrapmgr-component) method can be used to completely clear the cache. Valid Authentication Protocols are: | | | | --- | --- | | HMAC-MD5-96 (1) | Message-Digest algorithm 5. | | HMAC-SHA-96 (2) | Secure Hash Algorithm. | | HMAC-192-SHA-256 (3) | Secure Hash Algorithm. | | HMAC-384-SHA-512 (4) | Secure Hash Algorithm. | | HMAC-128-SHA-224 (5) | Secure Hash Algorithm. | | HMAC-256-SHA-384 (6) | Secure Hash Algorithm. | Valid Encryption Algorithms are: | | | | --- | --- | | DES (1) | Data Encryption Standard. | | AES (2) | Advanced Encryption Standard with key length of 128. | | 3DES (3) | Triple Data Encryption Standard. | | AES192 (4) | Advanced Encryption Standard with key length of 192. | | AES256 (5) | Advanced Encryption Standard with key length of 256. | # ClearCache Method ([SNMPTrapMgr](#snmptrapmgr-component) Component) Clears the internal authentication database. ## Syntax *C++ Builder Syntax* ```text void __fastcall ClearCache(); ``` ## Remarks All user and engine records are removed from the internal authentication cache as a result of this call. # Config Method ([SNMPTrapMgr](#snmptrapmgr-component) Component) Sets or retrieves a configuration setting. ## Syntax *C++ Builder Syntax* ```text String __fastcall Config(String ConfigurationString); ``` ## Remarks Config is a generic method available in every component. It is used to set and retrieve [configuration settings](#config-settings-snmptrapmgr-component) for the component. These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these *internal properties* is provided through the Config method. To set a configuration setting named *PROPERTY*, you must call *Config("PROPERTY=VALUE")*, where *VALUE* is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter). To read (query) the value of a [configuration setting](#config-settings-snmptrapmgr-component), you must call *Config("PROPERTY")*. The value will be returned as a string. # Deactivate Method ([SNMPTrapMgr](#snmptrapmgr-component) Component) Deactivates the component. ## Syntax *C++ Builder Syntax* ```text void __fastcall Deactivate(); ``` ## Remarks This method deactivates the component and will prohibit it from sending and receiving data. NOTE: Use the [Active](#active-property-snmptrapmgr-component) property to check whether the component is active. # DoEvents Method ([SNMPTrapMgr](#snmptrapmgr-component) Component) This method processes events from the internal message queue. ## Syntax *C++ Builder Syntax* ```text void __fastcall DoEvents(); ``` ## Remarks When DoEvents is called, the component processes any available events. If no events are available, it waits for a preset period of time, and then returns. # HashPasswords Method ([SNMPTrapMgr](#snmptrapmgr-component) Component) Hashes all passwords in the cache. ## Syntax *C++ Builder Syntax* ```text void __fastcall HashPasswords(); ``` ## Remarks Forces computation of all passwords hashes in the cache. Used together with the [HashPassword](#hashpassword-event-snmptrapmgr-component) event to enable implementations of external password hash storage. # PauseData Method ([SNMPTrapMgr](#snmptrapmgr-component) Component) This method pauses data reception. ## Syntax *C++ Builder Syntax* ```text void __fastcall PauseData(); ``` ## Remarks This method pauses data reception when called. While data reception is paused, the DataIn event will not fire. Call [ProcessData](#processdata-method-snmptrapmgr-component) to reenable data reception. # ProcessData Method ([SNMPTrapMgr](#snmptrapmgr-component) Component) This method reenables data reception after a call to PauseData . ## Syntax *C++ Builder Syntax* ```text void __fastcall ProcessData(); ``` ## Remarks This method reenables data reception after a previous call to [PauseData](#pausedata-method-snmptrapmgr-component). When [PauseData](#pausedata-method-snmptrapmgr-component) is called, the DataIn event will not fire. To reenable data reception and allow DataIn to fire, call this method. NOTE: This method is used only after previously calling [PauseData](#pausedata-method-snmptrapmgr-component). It does not need to be called to process incoming data by default. # RemoveEngine Method ([SNMPTrapMgr](#snmptrapmgr-component) Component) Removes the engine specified by EngineId from the internal authentication cache. ## Syntax *C++ Builder Syntax* ```text void __fastcall RemoveEngine(DynamicArray EngineId); ``` ## Remarks The internal authentication cache can be used as an alternative to the [GetUserPassword](#getuserpassword-event-snmptrapmgr-component) event, automatically checking the cache against the security parameters provided in the request signature. The [ShowCache](#showcache-method-snmptrapmgr-component) method is used to show the contents of the internal authentication cache. The [ClearCache](#clearcache-method-snmptrapmgr-component) method can be used to completely clear the cache. # RemoveUser Method ([SNMPTrapMgr](#snmptrapmgr-component) Component) Removes the user specified by User of the engine specified by EngineId from the internal authentication cache. ## Syntax *C++ Builder Syntax* ```text void __fastcall RemoveUser(String User, DynamicArray EngineId); ``` ## Remarks The internal authentication cache can be used as an alternative to the [GetUserPassword](#getuserpassword-event-snmptrapmgr-component) event, automatically checking the cache against the security parameters provided in the request signature. The [ShowCache](#showcache-method-snmptrapmgr-component) method is used to show the contents of the internal authentication cache. The [ClearCache](#clearcache-method-snmptrapmgr-component) method can be used to completely clear the cache. # Reset Method ([SNMPTrapMgr](#snmptrapmgr-component) Component) Clears the object arrays. ## Syntax *C++ Builder Syntax* ```text void __fastcall Reset(); ``` ## Remarks Clears the object arrays, and sets the trap and error properties to their default values. This is useful for reinitializing all the properties that are used to create outgoing packets before building a new packet. Note: SNMPVersion will be reset to **snmpverV2c (2)**. # ShowCache Method ([SNMPTrapMgr](#snmptrapmgr-component) Component) Lists all entries in the internal user and engine database. ## Syntax *C++ Builder Syntax* ```text void __fastcall ShowCache(); ``` ## Remarks A [CacheEntry](#cacheentry-event-snmptrapmgr-component) event is fired for every record in the database. # Value Method ([SNMPTrapMgr](#snmptrapmgr-component) Component) Returns the value corresponding to an OID. ## Syntax *C++ Builder Syntax* ```text String __fastcall Value(String OID); ``` ## Remarks If the OID does not exist in the Objects collection, a trappable error is generated. Please refer to the SNMPObject type for more information. # BadPacket Event ([SNMPTrapMgr](#snmptrapmgr-component) Component) Fired for erroneous and/or malformed messages. ## Syntax *C++ Builder Syntax* ```text typedef struct { String Packet; DynamicArray PacketB; String SourceAddress; int SourcePort; int ErrorCode; String ErrorDescription; bool Report; } TipnSNMPTrapMgrBadPacketEventParams; typedef void __fastcall (__closure *TipnSNMPTrapMgrBadPacketEvent)(System::TObject* Sender, TipnSNMPTrapMgrBadPacketEventParams *e); __property TipnSNMPTrapMgrBadPacketEvent OnBadPacket = { read=FOnBadPacket, write=FOnBadPacket }; ``` ## Remarks The full message is provided in the *Packet* parameter. The BadPacket event is also fired when authentication fails for received packets due to a bad password or other reasons. If the *Report* parameter is set to True, an unauthenticated error report will be sent to the client, otherwise the packet will be silently ignored. Please refer to the [GetUserPassword](#getuserpassword-event-snmptrapmgr-component) event for more information concerning SNMPv3 authentication. # CacheEntry Event ([SNMPTrapMgr](#snmptrapmgr-component) Component) Shows engines and users in the internal cache. ## Syntax *C++ Builder Syntax* ```text typedef struct { String EngineId; DynamicArray EngineIdB; int EngineBoots; int EngineTime; String User; String AuthenticationProtocol; String AuthenticationPassword; String EncryptionAlgorithm; String EncryptionPassword; } TipnSNMPTrapMgrCacheEntryEventParams; typedef void __fastcall (__closure *TipnSNMPTrapMgrCacheEntryEvent)(System::TObject* Sender, TipnSNMPTrapMgrCacheEntryEventParams *e); __property TipnSNMPTrapMgrCacheEntryEvent OnCacheEntry = { read=FOnCacheEntry, write=FOnCacheEntry }; ``` ## Remarks CacheEntry events are triggered by a call to [ShowCache](#showcache-method-snmptrapmgr-component). One event is fired for each user and engine. If there are no users for a particular engine, a single event is fired with the engine information, but empty values for user information. # CheckEngine Event ([SNMPTrapMgr](#snmptrapmgr-component) Component) Fired to check engine parameters (timeliness, etc.). ## Syntax *C++ Builder Syntax* ```text typedef struct { String EngineId; DynamicArray EngineIdB; int EngineBoots; int EngineTime; String User; int SecurityLevel; String RemoteAddress; int RemotePort; bool IsNew; bool Accept; } TipnSNMPTrapMgrCheckEngineEventParams; typedef void __fastcall (__closure *TipnSNMPTrapMgrCheckEngineEvent)(System::TObject* Sender, TipnSNMPTrapMgrCheckEngineEventParams *e); __property TipnSNMPTrapMgrCheckEngineEvent OnCheckEngine = { read=FOnCheckEngine, write=FOnCheckEngine }; ``` ## Remarks The *Accept* parameter determines if the engine will be accepted or not. If you set *Accept* to False prior to exiting the event, the processing on the message will stop and a [BadPacket](#badpacket-event-snmptrapmgr-component) event will be fired. The default value of *Accept* is True if and only if: a) the engine already exists in the internal authentication cache (the *IsNew* parameter is False) and the timeliness has been verified; b) the engine does not exist in the internal authentication cache (the *IsNew* parameter is True), but the packet has been authenticated by the component (*SecurityLevel* >= 1). In all other cases, the default value for *Accept* is False, and you are responsible for accepting or not accepting the engine based on other considerations. If *Accept* is true upon event exit, then: a) if the engine already exists in the internal authentication cache, its time is updated to reflect the new time and the processing of the packet continues; b) if the engine does not exist in the internal authentication cache, it is added there and if *User* is authenticated, the *User* will be added too. # Connected Event ([SNMPTrapMgr](#snmptrapmgr-component) Component) Fired immediately after a connection completes (or fails). ## Syntax *C++ Builder Syntax* ```text typedef struct { String RemoteAddress; int RemotePort; int StatusCode; String Description; } TipnSNMPTrapMgrConnectedEventParams; typedef void __fastcall (__closure *TipnSNMPTrapMgrConnectedEvent)(System::TObject* Sender, TipnSNMPTrapMgrConnectedEventParams *e); __property TipnSNMPTrapMgrConnectedEvent OnConnected = { read=FOnConnected, write=FOnConnected }; ``` ## Remarks This event fires after a connection completes or fails. *StatusCode* is the value returned by the system TCP/IP stack. This will be 0 if the connection was successful. *Description* contains a human readable description of the status. This will be "OK" if the connection was successful. *RemoteAddress* is the IP address of the remote host. *RemotePort* is the port on the remote host. # Disconnected Event ([SNMPTrapMgr](#snmptrapmgr-component) Component) Fired when a connection is closed. ## Syntax *C++ Builder Syntax* ```text typedef struct { String RemoteAddress; int RemotePort; int StatusCode; String Description; } TipnSNMPTrapMgrDisconnectedEventParams; typedef void __fastcall (__closure *TipnSNMPTrapMgrDisconnectedEvent)(System::TObject* Sender, TipnSNMPTrapMgrDisconnectedEventParams *e); __property TipnSNMPTrapMgrDisconnectedEvent OnDisconnected = { read=FOnDisconnected, write=FOnDisconnected }; ``` ## Remarks This event fires after a connection is broken. *StatusCode* is the value returned by the system TCP/IP stack. This will be 0 if the connection was broken normally. *Description* contains a human readable description of the status. This will be "OK" if the connection was broken normally. *RemoteAddress* is the IP address of the remote host. *RemotePort* is the port on the remote host. # DiscoveryRequest Event ([SNMPTrapMgr](#snmptrapmgr-component) Component) Fired when an SNMPv3 discovery packet is received. ## Syntax *C++ Builder Syntax* ```text typedef struct { String EngineId; DynamicArray EngineIdB; int EngineBoots; int EngineTime; String User; int SecurityLevel; String SourceAddress; int SourcePort; bool Respond; } TipnSNMPTrapMgrDiscoveryRequestEventParams; typedef void __fastcall (__closure *TipnSNMPTrapMgrDiscoveryRequestEvent)(System::TObject* Sender, TipnSNMPTrapMgrDiscoveryRequestEventParams *e); __property TipnSNMPTrapMgrDiscoveryRequestEvent OnDiscoveryRequest = { read=FOnDiscoveryRequest, write=FOnDiscoveryRequest }; ``` ## Remarks *EngineId*, *EngineBoots*, *EngineTime*, and *User* are the values received from *SourceAddress*. For SNMPv3, the *User* parameter shows the user that was supplied with the packet. This parameter *MUST* be used together with the *SecurityLevel* parameter which shows the level of security in the message. The *SecurityLevel* parameter shows whether the request has been authenticated. If *SecurityLevel* is 0, the request has *NOT* been authenticated (i.e. the packet signature has not been verified). For an authenticated, non encrypted request, *SecurityLevel* is 1. For an authenticated and encrypted request, *SecurityLevel* is 2. *Respond* is True by default, and will automatically send a response using the value in [LocalEngineId](#localengineid-property-snmptrapmgr-component). To suppress the response, set *Respond* to False. The value returned to *SourceAddress* for *EngineBoots* is always 0, and *EngineTime* is the number of seconds since January 1st, 1970 (GMT). # Error Event ([SNMPTrapMgr](#snmptrapmgr-component) Component) Fired when information is available about errors during data delivery. ## Syntax *C++ Builder Syntax* ```text typedef struct { int ErrorCode; String Description; } TipnSNMPTrapMgrErrorEventParams; typedef void __fastcall (__closure *TipnSNMPTrapMgrErrorEvent)(System::TObject* Sender, TipnSNMPTrapMgrErrorEventParams *e); __property TipnSNMPTrapMgrErrorEvent OnError = { read=FOnError, write=FOnError }; ``` ## Remarks The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception. The *ErrorCode* parameter contains an error code, and the *Description* parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the [Error Codes](#trappable-errors-snmptrapmgr-component) section. # GetUserPassword Event ([SNMPTrapMgr](#snmptrapmgr-component) Component) Retrieves a password associated with a user. ## Syntax *C++ Builder Syntax* ```text typedef struct { int PasswordType; String User; String EngineId; DynamicArray EngineIdB; String Password; int Algorithm; } TipnSNMPTrapMgrGetUserPasswordEventParams; typedef void __fastcall (__closure *TipnSNMPTrapMgrGetUserPasswordEvent)(System::TObject* Sender, TipnSNMPTrapMgrGetUserPasswordEventParams *e); __property TipnSNMPTrapMgrGetUserPasswordEvent OnGetUserPassword = { read=FOnGetUserPassword, write=FOnGetUserPassword }; ``` ## Remarks The GetUserPassword event is fired after initial inspection of SNMPv3 requests. The type of password required is provided in the *PasswordType* parameter: 1 for authentication, and 2 for encryption (privacy). The password corresponding to *User* and *EngineId* must be provided in the *Password* parameter. If the password is valid, processing will continue to other events such as GetRequest, SetRequest, etc. If the *PasswordType* parameter is 1 (authentication is used), the *Algorithm* parameter can be set. Possible values are: | | | | --- | --- | | Value | Authentication Algorithm | | 0 (default) | Any | | 1 | MD5 | | 2 | SHA1 | | 3 | SHA256 | | 4 | SHA512 | If the *PasswordType* parameter is 2 (encryption is used), the *Algorithm* parameter must also be set. Possible values are: | | | | --- | --- | | Value | Encryption Algorithm | | 1 (default) | DES | | 2 | AES | | 3 | 3DES | | 4 | AES192 | | 5 | AES256 | If the password does not match the signature in the request, a [BadPacket](#badpacket-event-snmptrapmgr-component) event will be fired, at which point you can decide whether to report the error to the client (see the description of the [BadPacket](#badpacket-event-snmptrapmgr-component) event for more information). If the *User* is invalid or unknown, set the password to empty string (default) to ignore the request. This will result in a [BadPacket](#badpacket-event-snmptrapmgr-component) event being fired, at which point you can decide whether to report the error to the client or not. # GetUserSecurityLevel Event ([SNMPTrapMgr](#snmptrapmgr-component) Component) Sets the security level for an incoming packet. ## Syntax *C++ Builder Syntax* ```text typedef struct { String User; String EngineId; DynamicArray EngineIdB; int SecurityLevel; } TipnSNMPTrapMgrGetUserSecurityLevelEventParams; typedef void __fastcall (__closure *TipnSNMPTrapMgrGetUserSecurityLevelEvent)(System::TObject* Sender, TipnSNMPTrapMgrGetUserSecurityLevelEventParams *e); __property TipnSNMPTrapMgrGetUserSecurityLevelEvent OnGetUserSecurityLevel = { read=FOnGetUserSecurityLevel, write=FOnGetUserSecurityLevel }; ``` ## Remarks The GetUserSecurityLevel event is fired after the first inspection of each SNMPv3 request. The *SecurityLevel* parameter determines the level of security for the message. On entry, the *SecurityLevel* parameter contains the default security level for *User* if the user is located in the internal cache, or if the *User* is not found in the cache, the *SecurityLevel* will be -1. The value of *SecurityLevel* upon exiting the event, determines how the message will be processed: | | | | --- | --- | | -1 | The message will be ignored and a [BadPacket](#badpacket-event-snmptrapmgr-component) event will be fired. | | 0 | No security. The message will be processed without any authentication and/or encryption. | | 1 | Authentication only. The message will be checked for a valid signature and the [GetUserPassword](#getuserpassword-event-snmptrapmgr-component) event will be fired to verify the authentication password. | | 2 | Authentication and Privacy. The message will be checked for a valid signature and the [GetUserPassword](#getuserpassword-event-snmptrapmgr-component) event will be fired twice: first to verify the authentication password, and then to verify the privacy password. | # HashPassword Event ([SNMPTrapMgr](#snmptrapmgr-component) Component) Fired before and after a password is hashed. ## Syntax *C++ Builder Syntax* ```text typedef struct { String Password; int AuthAlgorithm; String Hash; } TipnSNMPTrapMgrHashPasswordEventParams; typedef void __fastcall (__closure *TipnSNMPTrapMgrHashPasswordEvent)(System::TObject* Sender, TipnSNMPTrapMgrHashPasswordEventParams *e); __property TipnSNMPTrapMgrHashPasswordEvent OnHashPassword = { read=FOnHashPassword, write=FOnHashPassword }; ``` ## Remarks SNMPv3 passwords are hashed in order to obtain authentication and encryption keys. This is an expensive operation, and in certain situations it may be preferable to store the hashed passwords externally and supply them on demand. If a hash is required, the event fires with an empty string in the *Hash* parameter. In this case, you can choose to supply a value for the hash and stop the component from computing the hash. The event also fires every time a hash is computed. In this case, the *Hash* parameter contains the value of the computed hash. *AuthAlgorithm* contains either 1 for HMAC-MD5-96, 2 for HMAC-SHA-96 or 3 for HMAC-192-SHA-256 # InformRequest Event ([SNMPTrapMgr](#snmptrapmgr-component) Component) Fired when an InformRequest packet is received. ## Syntax *C++ Builder Syntax* ```text typedef struct { int RequestId; int SNMPVersion; String Community; String User; int SecurityLevel; String SourceAddress; int SourcePort; int ErrorIndex; int ErrorStatus; String ErrorDescription; bool Respond; } TipnSNMPTrapMgrInformRequestEventParams; typedef void __fastcall (__closure *TipnSNMPTrapMgrInformRequestEvent)(System::TObject* Sender, TipnSNMPTrapMgrInformRequestEventParams *e); __property TipnSNMPTrapMgrInformRequestEvent OnInformRequest = { read=FOnInformRequest, write=FOnInformRequest }; ``` ## Remarks For SNMPv3, the *User* parameter shows the user that was supplied with the packet. This parameter *MUST* be used together with the *SecurityLevel* parameter which shows the level of security in the message. The *SecurityLevel* parameter shows whether the request has been authenticated. If *SecurityLevel* is 0, the request has *NOT* been authenticated (i.e. the packet signature has not been verified). For an authenticated, non encrypted request, *SecurityLevel* is 1. For an authenticated and encrypted request, *SecurityLevel* is 2. The user in an InformRequest packet (SNMPv3) must be a valid user in the internal authentication cache (see the [AddUser](#adduser-method-snmptrapmgr-component) method and the [CheckEngine](#checkengine-event-snmptrapmgr-component) event for more information). If not, the request is rejected, and a [BadPacket](#badpacket-event-snmptrapmgr-component) event is fired before InformRequest is fired. The list of variables in the SNMP packet, including optional values and types, is provided through the Objects collection. Each object is of type SNMPObject. This type describes the [ObjId](#objid-property-snmptrapmgr-component), [ObjType](#objtype-property-snmptrapmgr-component), and [ObjValue](#objvalue-property-snmptrapmgr-component) of each SNMP object. These variables must be copied to another location before the event has completed executing, or they may be overridden by other events. The *SourceAddress* and *SourcePort* parameters show the address and port of the sender as reported by the TCP/IP stack. The *MessageId* parameter identifies the received request. For SNMPv3, the *User* parameter shows the user that was supplied with the packet. This parameter *MUST* be used together with the *SecurityLevel* parameter which shows the level of security in the message. The *SecurityLevel* parameter shows whether the request has been authenticated. If *SecurityLevel* is 0, the request has *NOT* been authenticated (i.e. the packet signature has not been verified). For an authenticated, non encrypted request, *SecurityLevel* is 1. For an authenticated and encrypted request, *SecurityLevel* is 2. To send a response, the *Respond* parameter must be set to true. By default, this value is false, which means no response will be sent. The *ErrorStatus* parameter may also be set to a valid SNMP status code (the default value is 0, which represents no error). The following is a list of valid SNMP status code values: | | | | --- | --- | | 0 (noError) | No error. | | 1 (tooBig) | The response cannot fit in a single SNMP message. | | 2 (noSuchName) | Variable does not exist. | | 3 (badValue) | Invalid value or syntax. | | 4 (readOnly) | Variable is read-only. | | 5 (genError) | Other error (SNMPv1). | | 6 (noAccess) | Access denied. | | 7 (wrongType) | Wrong object type. | | 8 (wrongLength) | Wrong length. | | 9 (wrongEncoding) | Wrong encoding. | | 10 (wrongValue) | Wrong value. | | 11 (noCreation) | No creation. | | 12 (inconsistentValue) | Inconsistent value. | | 13 (resourceUnavailable) | Resource unavailable. | | 14 (commitFailed) | Commit failed. | | 15 (undoFailed) | Undo failed. | | 16 (authorizationError) | Authorization error. | | 17 (notWritable) | Variable is not writable. | | 18 (inconsistentName) | Inconsistent name. | The *ErrorIndex* parameter indicates the index of the first variable (object) that caused an error. The default value is 0. Variable indexes start with 0. *ErrorIndex* has no meaning when *ErrorStatus* is 0 (no error). # PacketTrace Event ([SNMPTrapMgr](#snmptrapmgr-component) Component) Fired for every packet sent or received. ## Syntax *C++ Builder Syntax* ```text typedef struct { String Packet; DynamicArray PacketB; int Direction; String PacketAddress; int PacketPort; } TipnSNMPTrapMgrPacketTraceEventParams; typedef void __fastcall (__closure *TipnSNMPTrapMgrPacketTraceEvent)(System::TObject* Sender, TipnSNMPTrapMgrPacketTraceEventParams *e); __property TipnSNMPTrapMgrPacketTraceEvent OnPacketTrace = { read=FOnPacketTrace, write=FOnPacketTrace }; ``` ## Remarks The PacketTrace event shows all the packets sent or received by the component. *Packet* contains the full contents of the datagram. *Direction* shows the direction of the packet: 1 for incoming packets, and 2 for outgoing packets. In the case of an incoming packet, *PacketAddress* and *PacketPort* identify the source of the packet. In the case of an outgoing packet, *PacketAddress* and *PacketPort* identify the destination of the packet. # SSLClientAuthentication Event ([SNMPTrapMgr](#snmptrapmgr-component) Component) Fired when the client presents its credentials to the server. ## Syntax *C++ Builder Syntax* ```text typedef struct { String RemoteAddress; int RemotePort; String CertEncoded; DynamicArray CertEncodedB; String CertSubject; String CertIssuer; String Status; bool Accept; } TipnSNMPTrapMgrSSLClientAuthenticationEventParams; typedef void __fastcall (__closure *TipnSNMPTrapMgrSSLClientAuthenticationEvent)(System::TObject* Sender, TipnSNMPTrapMgrSSLClientAuthenticationEventParams *e); __property TipnSNMPTrapMgrSSLClientAuthenticationEvent OnSSLClientAuthentication = { read=FOnSSLClientAuthentication, write=FOnSSLClientAuthentication }; ``` ## Remarks This event fires when a client connects to the component and presents a certificate for authentication. The *Accept* parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether to continue or not. When *Accept* is False, *Status* shows why the verification failed (otherwise, *Status* contains the string "OK"). *RemoteAddress* is the IP address of the connecting client. *RemotePort* is the source port of the connecting client. *CertEncoded* is the base64 encoded certificate presented by the client. *CertSubject* is the subject of the certificate presented by the client. *CertIssuer* is the subject of the issuer of the certificate presented by the client. *Status* is the status of the certificate. *Accept* defines whether the certificate is accepted. # SSLStatus Event ([SNMPTrapMgr](#snmptrapmgr-component) Component) Shows the progress of the secure connection. ## Syntax *C++ Builder Syntax* ```text typedef struct { String RemoteAddress; int RemotePort; String Message; } TipnSNMPTrapMgrSSLStatusEventParams; typedef void __fastcall (__closure *TipnSNMPTrapMgrSSLStatusEvent)(System::TObject* Sender, TipnSNMPTrapMgrSSLStatusEventParams *e); __property TipnSNMPTrapMgrSSLStatusEvent OnSSLStatus = { read=FOnSSLStatus, write=FOnSSLStatus }; ``` ## Remarks The event is fired for informational and logging purposes only. It is used to track the progress of the connection. *RemoteAddress* is the IP address of the remote machine. *RemotePort* is the port of the remote machine. *Message* is the log message. # Trap Event ([SNMPTrapMgr](#snmptrapmgr-component) Component) Fired when a SNMP trap packet is received. ## Syntax *C++ Builder Syntax* ```text typedef struct { int RequestId; int SNMPVersion; String Community; String User; int SecurityLevel; String TrapOID; __int64 TimeStamp; String AgentAddress; String SourceAddress; int SourcePort; } TipnSNMPTrapMgrTrapEventParams; typedef void __fastcall (__closure *TipnSNMPTrapMgrTrapEvent)(System::TObject* Sender, TipnSNMPTrapMgrTrapEventParams *e); __property TipnSNMPTrapMgrTrapEvent OnTrap = { read=FOnTrap, write=FOnTrap }; ``` ## Remarks The *TrapOID* and *TimeStamp* parameters contain the Trap OID and TimeStamp. In the case of an SNMPv1 trap, there are two possible scenarios: First, if the enterprise of the trap is "1.3.6.1.6.3.1.1.5", *TrapOID* will be a concatenation of TrapEnterprise and GenericTrap + 1. For instance a TrapOID of "1.3.6.1.6.3.1.1.5.5" has a TrapEnterprise of "1.3.6.1.6.3.1.1.5" and a GenericTrap of "4". Second, In all other cases *TrapOID* will be a concatenation of the values for TrapEnterprise, GenericTrap, and SpecificTrap, separated by '.'. For SNMPv2 and above, they are read from the variable-value list (if available). For SNMPv3, the *User* parameter shows the user that was supplied with the packet. This parameter *MUST* be used together with the *SecurityLevel* parameter which shows the level of security in the message. The *SecurityLevel* parameter shows whether the request has been authenticated. If *SecurityLevel* is 0, the request has *NOT* been authenticated (i.e. the packet signature has not been verified). For an authenticated, non encrypted request, *SecurityLevel* is 1. For an authenticated and encrypted request, *SecurityLevel* is 2. The list of variables in the SNMP packet, including optional values and types, is provided through the Objects collection. Each object is of type SNMPObject. This type describes the [ObjId](#objid-property-snmptrapmgr-component), [ObjType](#objtype-property-snmptrapmgr-component), and [ObjValue](#objvalue-property-snmptrapmgr-component) of each SNMP object. These variables must be copied to another location before the event has completed executing, or they may be overridden by other events. The *SourceAddress* and *SourcePort* parameters show the address and port of the sender as reported by the TCP/IP stack. Some parameters are only applicable depending on the SNMPVersion value. The table below shows which parameters are applicable to which SNMP versions. | | | | | | --- | --- | --- | --- | | | SNMPv1 | SNMPv2 | SNMPv3 | | AgentAddress | X | | | | Community | X | X | | | RequestId | | X | X | | SecurityLevel | | | X | | User | | | X | | SNMPVersion | X | X | X | | SourceAddress | X | X | X | | SourcePort | X | X | X | | TimeStamp | X | X | X | | TrapOID | X | X | X | # Config Settings ([SNMPTrapMgr](#snmptrapmgr-component) Component) The component accepts one or more of the following *configuration settings*. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these *internal properties* is provided through the [Config](#config-method-snmptrapmgr-component) method. ### SNMPTrapMgr Config Settings **AuthenticationKey**: The key to use for authentication.This setting takes the hex-encoded key for authentication and may be set inside [GetUserPassword](#getuserpassword-event-snmptrapmgr-component). **CompatibilityMode**: Whether to operate the component in a specific compatibility mode.This setting will cause the component to operate in a manner different than normal so that it is compatible with third-party products and libraries. The following table lists the possible values for this setting: | | | | --- | --- | | 0 (default) | Component operates normally for greatest compatibility. | | 1 | Component uses SNMP4j-compatible encryption (AES192 and AES256). | | 2 | Component automatically detects whether to use SNMP4j-compatible encryption (AES192 and AES256). Note: This option is only applicable when receiving packets. If you are using [SNMPMgr](SNMPMgr.md#SNMPMgr) or sending secure traps, you will need to select either 0 or 1. | **ContextEngineId**: Sets the context engine id of the SNMP entity. If set, the context engine id included in the PDU will be set. **ContextName**: Sets the context name of the SNMP entity. If set, the context name included in the PDU will be set. **DecryptLogPackets**: Whether to decrypt logged packets.When set to *true* this setting will cause the component to decrypt packets logged in [PacketTrace](#packettrace-event-snmptrapmgr-component). This only applies when using SNMP Version 3. The default is *false*. **EncryptionKey**: The key to use for encryption.This setting takes the hex-encoded key for encryption and may be set inside [GetUserPassword](#getuserpassword-event-snmptrapmgr-component). **ForceLocalPort**: Forces the component to bind to a specific port. The default value is True, which makes the component throw an error if [LocalPort](#localport-property-snmptrapmgr-component) is busy. When [ForceLocalPort](#ForceLocalPort) is set to False and the port is busy, the component silently chooses another random port. **IncomingContextEngineId**: The engine Id of the received packet.This setting holds the engine Id of the received packet. This may be queried at any time, including from within an event, and returns the engine Id of the received packet. This is not needed in most cases, but can be used to store the incoming engine Id to send an asynchronous response later. This value is read-only. **IncomingContextName**: The context name of the received packet.This setting holds the context name of the received packet. This may be queried at any time, including from within an event, and returns the context name of the received packet. This is not needed in most cases, but can be used to store the incoming context name to send an asynchronous response later. This value is read-only. **ShowCacheForUser**: Shows the cache entry for a single user.This configuration setting causes the component to call ShowCache internally, and only fire the CacheEntry event for the user specified. **SourceAddress**: The source address of the received packet.This setting holds the source address of the received packet. This may be queried at any time, including from within an event, and returns the source address of the received packet. This value is read-only. **SourcePort**: The source port of the received packet.This setting holds the source port of the received packet. This may be queried at any time, including from within an event, and returns the source port of the received packet. This value is read-only. **TimeWindow**: The time window used for SNMPv3 timeliness checking (authentication).The default value is 150 (seconds). ### UDP Config Settings **CaptureIPPacketInfo**: Used to capture the packet information.If this is set to True, the component will capture the IP packet information. The default value for this setting is False. NOTE: This configuration setting is available only in Windows. **DelayHostResolution**: Whether the hostname is resolved when RemoteHost is set.This configuration setting specifies whether a hostname is resolved immediately when RemoteHost is set. If *true* the component will resolve the hostname and the IP address will be present in the RemoteHost property. If *false*, the hostname is not resolved until needed by the component when a method to connect or send data is called. If desired, ResolveRemoteHost may be called to manually resolve the value in RemoteHost at any time. The default value is *false*. **DestinationAddress**: Used to get the destination address from the packet information.If [CaptureIPPacketInfo](#CaptureIPPacketInfo) is set to True, then this will be populated with the packet's destination address when a packet is received. This information will be accessible in the DataIn event. NOTE: This configuration setting is available only in Windows. **DontFragment**: Used to set the Don't Fragment flag of outgoing packets.When set to True, packets sent by the component will have the Don't Fragment flag set. The default value is False. **LocalHost**: The name of the local host through which connections are initiated or accepted. The [LocalHost](#localhost-property-snmptrapmgr-component) setting contains the name of the local host as obtained by the *gethostname()* system call, or if the user has assigned an IP address, the value of that address. In multihomed hosts (machines with more than one IP interface), setting LocalHost to the value of an interface will make the component initiate connections (or accept in the case of server components) only through that interface. If the component is connected, the [LocalHost](#localhost-property-snmptrapmgr-component) setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface). **LocalPort**: The port in the local host where the component binds. This configuration setting must be set before a connection is attempted. It instructs the component to bind to a specific port (or communication endpoint) in the local machine. Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by [LocalPort](#localport-property-snmptrapmgr-component) after the connection is established. [LocalPort](#localport-property-snmptrapmgr-component) cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error. This configuration setting is useful when trying to connect to services that require a trusted port on the client side. An example is the remote shell (rsh) service in UNIX systems. **MaxPacketSize**: The maximum length of the packets that can be received.This configuration setting specifies the maximum size of the datagrams that the component will accept without truncation. **QOSDSCPValue**: Used to specify an arbitrary QOS/DSCP setting (optional).[UseConnection](#UseConnection) must be True to use this configuration setting. This option allows you to specify an arbitrary DSCP value between 0 and 63. The default is 0. When set to the default value, the component will not set a DSCP value. NOTE: This configuration setting uses the qWAVE API and is available only on Windows 7, Windows Server 2008 R2, and later. **QOSTrafficType**: Used to specify QOS/DSCP settings (optional).[UseConnection](#UseConnection) must be True to use this setting. You may specify either the text or integer values: BestEffort (0), Background (1), ExcellentEffort (2), AudioVideo (3), Voice (4), and Control (5). NOTE: This configuration setting uses the qWAVE API and is available only on Windows Vista and Windows Server 2008 or above. NOTE: QOSTrafficType must be set before setting [Active](#active-property-snmptrapmgr-component) to True. **ShareLocalPort**: If set to True, allows more than one instance of the component to be active on the same local port.This option must be set before the component is activated through the [Active](#active-property-snmptrapmgr-component) property or it will have no effect. The default value for this setting is False. **UseConnection**: Determines whether to use a connected socket.[UseConnection](#UseConnection) specifies whether or not the component should use a connected socket. The connection is defined as an association in between the local address/port and the remote address/port. As such, this is not a connection in the traditional Transmission Control Protocol (TCP) sense. It means only that the component will send and receive data to and from the specified destination. The default value for this setting is False. **UseIPv6**: Whether or not to use IPv6.By default, the component expects an IPv4 address for local and remote host properties, and it will create an IPv4 socket. To use IPv6 instead, set this to True. ### Socket Config Settings **AbsoluteTimeout**: Determines whether timeouts are inactivity timeouts or absolute timeouts.If [AbsoluteTimeout](#AbsoluteTimeout) is set to True, any method that does not complete within Timeout seconds will be aborted. By default, *AbsoluteTimeout* is False, and the timeout is an inactivity timeout. NOTE: This option is not valid for User Datagram Protocol (UDP) ports. **FirewallData**: Used to send extra data to the firewall.When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g., headers for custom authentication schemes). **InBufferSize**: The size in bytes of the incoming queue of the socket.This is the size of an internal queue in the Transmission Control Protocol (TCP)/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. In some cases, increasing the value of the *InBufferSize* setting can provide significant improvements in performance. Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the *InBufferSize* reverts to its defined size. The same happens if you attempt to make it too large or too small. **OutBufferSize**: The size in bytes of the outgoing queue of the socket.This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. In some cases, increasing the value of the *OutBufferSize* setting can provide significant improvements in performance. Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the *OutBufferSize* reverts to its defined size. The same happens if you attempt to make it too large or too small. ### Base Config Settings **BuildInfo**: Information about the product's build.When queried, this setting will return a string containing information about the product's build. **CodePage**: The system code page used for Unicode to Multibyte translations.The default code page is Unicode UTF-8 (65001). The following is a list of valid code page identifiers: | | | | --- | --- | | Identifier | Name | | 037 | IBM EBCDIC - U.S./Canada | | 437 | OEM - United States | | 500 | IBM EBCDIC - International | | 708 | Arabic - ASMO 708 | | 709 | Arabic - ASMO 449+, BCON V4 | | 710 | Arabic - Transparent Arabic | | 720 | Arabic - Transparent ASMO | | 737 | OEM - Greek (formerly 437G) | | 775 | OEM - Baltic | | 850 | OEM - Multilingual Latin I | | 852 | OEM - Latin II | | 855 | OEM - Cyrillic (primarily Russian) | | 857 | OEM - Turkish | | 858 | OEM - Multilingual Latin I + Euro symbol | | 860 | OEM - Portuguese | | 861 | OEM - Icelandic | | 862 | OEM - Hebrew | | 863 | OEM - Canadian-French | | 864 | OEM - Arabic | | 865 | OEM - Nordic | | 866 | OEM - Russian | | 869 | OEM - Modern Greek | | 870 | IBM EBCDIC - Multilingual/ROECE (Latin-2) | | 874 | ANSI/OEM - Thai (same as 28605, ISO 8859-15) | | 875 | IBM EBCDIC - Modern Greek | | 932 | ANSI/OEM - Japanese, Shift-JIS | | 936 | ANSI/OEM - Simplified Chinese (PRC, Singapore) | | 949 | ANSI/OEM - Korean (Unified Hangul Code) | | 950 | ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC) | | 1026 | IBM EBCDIC - Turkish (Latin-5) | | 1047 | IBM EBCDIC - Latin 1/Open System | | 1140 | IBM EBCDIC - U.S./Canada (037 + Euro symbol) | | 1141 | IBM EBCDIC - Germany (20273 + Euro symbol) | | 1142 | IBM EBCDIC - Denmark/Norway (20277 + Euro symbol) | | 1143 | IBM EBCDIC - Finland/Sweden (20278 + Euro symbol) | | 1144 | IBM EBCDIC - Italy (20280 + Euro symbol) | | 1145 | IBM EBCDIC - Latin America/Spain (20284 + Euro symbol) | | 1146 | IBM EBCDIC - United Kingdom (20285 + Euro symbol) | | 1147 | IBM EBCDIC - France (20297 + Euro symbol) | | 1148 | IBM EBCDIC - International (500 + Euro symbol) | | 1149 | IBM EBCDIC - Icelandic (20871 + Euro symbol) | | 1200 | Unicode UCS-2 Little-Endian (BMP of ISO 10646) | | 1201 | Unicode UCS-2 Big-Endian | | 1250 | ANSI - Central European | | 1251 | ANSI - Cyrillic | | 1252 | ANSI - Latin I | | 1253 | ANSI - Greek | | 1254 | ANSI - Turkish | | 1255 | ANSI - Hebrew | | 1256 | ANSI - Arabic | | 1257 | ANSI - Baltic | | 1258 | ANSI/OEM - Vietnamese | | 1361 | Korean (Johab) | | 10000 | MAC - Roman | | 10001 | MAC - Japanese | | 10002 | MAC - Traditional Chinese (Big5) | | 10003 | MAC - Korean | | 10004 | MAC - Arabic | | 10005 | MAC - Hebrew | | 10006 | MAC - Greek I | | 10007 | MAC - Cyrillic | | 10008 | MAC - Simplified Chinese (GB 2312) | | 10010 | MAC - Romania | | 10017 | MAC - Ukraine | | 10021 | MAC - Thai | | 10029 | MAC - Latin II | | 10079 | MAC - Icelandic | | 10081 | MAC - Turkish | | 10082 | MAC - Croatia | | 12000 | Unicode UCS-4 Little-Endian | | 12001 | Unicode UCS-4 Big-Endian | | 20000 | CNS - Taiwan | | 20001 | TCA - Taiwan | | 20002 | Eten - Taiwan | | 20003 | IBM5550 - Taiwan | | 20004 | TeleText - Taiwan | | 20005 | Wang - Taiwan | | 20105 | IA5 IRV International Alphabet No. 5 (7-bit) | | 20106 | IA5 German (7-bit) | | 20107 | IA5 Swedish (7-bit) | | 20108 | IA5 Norwegian (7-bit) | | 20127 | US-ASCII (7-bit) | | 20261 | T.61 | | 20269 | ISO 6937 Non-Spacing Accent | | 20273 | IBM EBCDIC - Germany | | 20277 | IBM EBCDIC - Denmark/Norway | | 20278 | IBM EBCDIC - Finland/Sweden | | 20280 | IBM EBCDIC - Italy | | 20284 | IBM EBCDIC - Latin America/Spain | | 20285 | IBM EBCDIC - United Kingdom | | 20290 | IBM EBCDIC - Japanese Katakana Extended | | 20297 | IBM EBCDIC - France | | 20420 | IBM EBCDIC - Arabic | | 20423 | IBM EBCDIC - Greek | | 20424 | IBM EBCDIC - Hebrew | | 20833 | IBM EBCDIC - Korean Extended | | 20838 | IBM EBCDIC - Thai | | 20866 | Russian - KOI8-R | | 20871 | IBM EBCDIC - Icelandic | | 20880 | IBM EBCDIC - Cyrillic (Russian) | | 20905 | IBM EBCDIC - Turkish | | 20924 | IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol) | | 20932 | JIS X 0208-1990 & 0121-1990 | | 20936 | Simplified Chinese (GB2312) | | 21025 | IBM EBCDIC - Cyrillic (Serbian, Bulgarian) | | 21027 | Extended Alpha Lowercase | | 21866 | Ukrainian (KOI8-U) | | 28591 | ISO 8859-1 Latin I | | 28592 | ISO 8859-2 Central Europe | | 28593 | ISO 8859-3 Latin 3 | | 28594 | ISO 8859-4 Baltic | | 28595 | ISO 8859-5 Cyrillic | | 28596 | ISO 8859-6 Arabic | | 28597 | ISO 8859-7 Greek | | 28598 | ISO 8859-8 Hebrew | | 28599 | ISO 8859-9 Latin 5 | | 28605 | ISO 8859-15 Latin 9 | | 29001 | Europa 3 | | 38598 | ISO 8859-8 Hebrew | | 50220 | ISO 2022 Japanese with no halfwidth Katakana | | 50221 | ISO 2022 Japanese with halfwidth Katakana | | 50222 | ISO 2022 Japanese JIS X 0201-1989 | | 50225 | ISO 2022 Korean | | 50227 | ISO 2022 Simplified Chinese | | 50229 | ISO 2022 Traditional Chinese | | 50930 | Japanese (Katakana) Extended | | 50931 | US/Canada and Japanese | | 50933 | Korean Extended and Korean | | 50935 | Simplified Chinese Extended and Simplified Chinese | | 50936 | Simplified Chinese | | 50937 | US/Canada and Traditional Chinese | | 50939 | Japanese (Latin) Extended and Japanese | | 51932 | EUC - Japanese | | 51936 | EUC - Simplified Chinese | | 51949 | EUC - Korean | | 51950 | EUC - Traditional Chinese | | 52936 | HZ-GB2312 Simplified Chinese | | 54936 | Windows XP: GB18030 Simplified Chinese (4 Byte) | | 57002 | ISCII Devanagari | | 57003 | ISCII Bengali | | 57004 | ISCII Tamil | | 57005 | ISCII Telugu | | 57006 | ISCII Assamese | | 57007 | ISCII Oriya | | 57008 | ISCII Kannada | | 57009 | ISCII Malayalam | | 57010 | ISCII Gujarati | | 57011 | ISCII Punjabi | | 65000 | Unicode UTF-7 | | 65001 | Unicode UTF-8 | The following is a list of valid code page identifiers for Mac OS only: | | | | --- | --- | | Identifier | Name | | 1 | ASCII | | 2 | NEXTSTEP | | 3 | JapaneseEUC | | 4 | UTF8 | | 5 | ISOLatin1 | | 6 | Symbol | | 7 | NonLossyASCII | | 8 | ShiftJIS | | 9 | ISOLatin2 | | 10 | Unicode | | 11 | WindowsCP1251 | | 12 | WindowsCP1252 | | 13 | WindowsCP1253 | | 14 | WindowsCP1254 | | 15 | WindowsCP1250 | | 21 | ISO2022JP | | 30 | MacOSRoman | | 10 | UTF16String | | 0x90000100 | UTF16BigEndian | | 0x94000100 | UTF16LittleEndian | | 0x8c000100 | UTF32String | | 0x98000100 | UTF32BigEndian | | 0x9c000100 | UTF32LittleEndian | | 65536 | Proprietary | **LicenseInfo**: Information about the current license.When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information: - Product: The product the license is for. - Product Key: The key the license was generated from. - License Source: Where the license was found (e.g., RuntimeLicense, License File). - License Type: The type of license installed (e.g., Royalty Free, Single Server). - Last Valid Build: The last valid build number for which the license will work. **MaskSensitiveData**: Whether sensitive data is masked in log messages.In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to *true* to mask sensitive data. The default is *true*. **UseInternalSecurityAPI**: Whether or not to use the system security libraries or an internal implementation. When set to *false*, the component will use the system security libraries by default to perform cryptographic functions where applicable. Setting this configuration setting to *true* tells the component to use the internal implementation instead of using the system security libraries. This setting is set to *false* by default on all platforms. # Trappable Errors ([SNMPTrapMgr](#snmptrapmgr-component) Component) ### SNMPTrapMgr Errors | | | | --- | --- | | 301 | Bad Object Index. | | 302 | Value exceeds maximum number of objects allowed. | | 303 | The value must be an IP address in dotted format. | | 305 | Unsupported SNMP version. | | 306 | Unknown PDU type. | | 307 | The component is busy performing the current action. | | 308 | Verification failed. | | 309 | Missing password for Verification. | | 310 | Missing signature. | | 311 | Missing remote time. | | 312 | Missing timeout value. | | 313 | Decryption Failed. | | 314 | Missing password for decryption. | | 315 | Not encrypted. | | 316 | Security model not supported. | | 317 | Defective packet | | 318 | Not from bound point. | | 319 | Operation not permitted in current role. | | 320 | Bad packet. | | 321 | Message not authenticated. | | 322 | No such oid. | | 323 | Missing privacy parameter. | | 324 | Bad engine id. | | 325 | Bad time frame. | | 326 | Bad user name. | | 327 | Security level was not accepted. | | 328 | Discovery failed. | | 329 | Incorrect key length. | The component may also return one of the following error codes, which are inherited from other components. ### UDP Errors | | | | --- | --- | | 104 | UDP is already [Active](#active-property-snmptrapmgr-component). | | 106 | You cannot change the [LocalPort](#localport-property-snmptrapmgr-component) while the component is [Active](#active-property-snmptrapmgr-component). | | 107 | You cannot change the [LocalHost](#localhost-property-snmptrapmgr-component) at this time. A connection is in progress. | | 109 | The component must be [Active](#active-property-snmptrapmgr-component) for this operation. | | 112 | You cannot change [MaxPacketSize](#MaxPacketSize) while the component is [Active](#active-property-snmptrapmgr-component). | | 113 | You cannot change [ShareLocalPort](#ShareLocalPort) option while the component is [Active](#active-property-snmptrapmgr-component). | | 114 | You cannot change RemoteHost when [UseConnection](#UseConnection) is set and the component [Active](#active-property-snmptrapmgr-component). | | 115 | You cannot change RemotePort when [UseConnection](#UseConnection) is set and the component is [Active](#active-property-snmptrapmgr-component). | | 116 | RemotePort cannot be zero when [UseConnection](#UseConnection) is set. Please specify a valid service port number. | | 117 | You cannot change [UseConnection](#UseConnection) while the component is [Active](#active-property-snmptrapmgr-component). | | 118 | Message cannot be longer than [MaxPacketSize](#MaxPacketSize). | | 119 | Message too short. | | 434 | Unable to convert string to selected CodePage. | ### SSL Errors | | | | --- | --- | | 270 | Cannot load specified security library. | | 271 | Cannot open certificate store. | | 272 | Cannot find specified certificate. | | 273 | Cannot acquire security credentials. | | 274 | Cannot find certificate chain. | | 275 | Cannot verify certificate chain. | | 276 | Error during handshake. | | 280 | Error verifying certificate. | | 281 | Could not find client certificate. | | 282 | Could not find server certificate. | | 283 | Error encrypting data. | | 284 | Error decrypting data. | ### TCP/IP Errors | | | | --- | --- | | 10004 | [10004] Interrupted system call. | | 10009 | [10009] Bad file number. | | 10013 | [10013] Access denied. | | 10014 | [10014] Bad address. | | 10022 | [10022] Invalid argument. | | 10024 | [10024] Too many open files. | | 10035 | [10035] Operation would block. | | 10036 | [10036] Operation now in progress. | | 10037 | [10037] Operation already in progress. | | 10038 | [10038] Socket operation on nonsocket. | | 10039 | [10039] Destination address required. | | 10040 | [10040] Message is too long. | | 10041 | [10041] Protocol wrong type for socket. | | 10042 | [10042] Bad protocol option. | | 10043 | [10043] Protocol is not supported. | | 10044 | [10044] Socket type is not supported. | | 10045 | [10045] Operation is not supported on socket. | | 10046 | [10046] Protocol family is not supported. | | 10047 | [10047] Address family is not supported by protocol family. | | 10048 | [10048] Address already in use. | | 10049 | [10049] Cannot assign requested address. | | 10050 | [10050] Network is down. | | 10051 | [10051] Network is unreachable. | | 10052 | [10052] Net dropped connection or reset. | | 10053 | [10053] Software caused connection abort. | | 10054 | [10054] Connection reset by peer. | | 10055 | [10055] No buffer space available. | | 10056 | [10056] Socket is already connected. | | 10057 | [10057] Socket is not connected. | | 10058 | [10058] Cannot send after socket shutdown. | | 10059 | [10059] Too many references, cannot splice. | | 10060 | [10060] Connection timed out. | | 10061 | [10061] Connection refused. | | 10062 | [10062] Too many levels of symbolic links. | | 10063 | [10063] File name is too long. | | 10064 | [10064] Host is down. | | 10065 | [10065] No route to host. | | 10066 | [10066] Directory is not empty | | 10067 | [10067] Too many processes. | | 10068 | [10068] Too many users. | | 10069 | [10069] Disc Quota Exceeded. | | 10070 | [10070] Stale NFS file handle. | | 10071 | [10071] Too many levels of remote in path. | | 10091 | [10091] Network subsystem is unavailable. | | 10092 | [10092] WINSOCK DLL Version out of range. | | 10093 | [10093] Winsock is not loaded yet. | | 11001 | [11001] Host not found. | | 11002 | [11002] Nonauthoritative 'Host not found' (try again or check DNS setup). | | 11003 | [11003] Nonrecoverable errors: FORMERR, REFUSED, NOTIMP. | | 11004 | [11004] Valid name, no data record (check DNS setup). |