# MX Component

The MX component enables querying of mail exchange (MX) records from a Domain Name Server (DNS). Thus, it will find out the names of the mail servers accepting email for a given email address or domain.

## Syntax

```text
TipwMX
```

## Remarks

The component will attempt to automatically determine the name of a DNS server from the system settings or from the value of the [DNSServer](#dnsserver-property-mx-component) property.

The component operates in synchronous or asynchronous mode, depending on the value of the [Timeout](#timeout-property-mx-component) property. Calling the [Resolve](#resolve-method-mx-component) method makes the component query the [DNSServer](#dnsserver-property-mx-component). The [Response](#response-event-mx-component) event is fired for each server that handles mail for the email address. The component will fill out the [MailServer](#mailserver-property-mx-component) property with the most preferred mail server and will set the [Status](#status-property-mx-component) property to "OK" or to an error message upon completion.

The [RequestId](#requestid-property-mx-component) property may be used to identify requests and is used in the [Response](#response-event-mx-component) event. The user may set its value before sending out requests and then match the responses to the request using the *RequestId* parameter in the [Response](#response-event-mx-component) event.

## Property List

*The following is the full list of the properties of the component with short descriptions. Click on the links for further details.*

|  |  |
| --- | --- |
| [DNSPort](#dnsport-property-mx-component) | This property includes the port where the DNS server is listening. |
| [DNSServer](#dnsserver-property-mx-component) | This is the address of the DNS server. |
| [Idle](#idle-property-mx-component) | The current status of the component. |
| [LocalHost](#localhost-property-mx-component) | The name of the local host or user-assigned IP interface through which connections are initiated or accepted. |
| [MailServer](#mailserver-property-mx-component) | This property includes the mail server with the lowest precedence value (lowest cost to reach). |
| [RequestId](#requestid-property-mx-component) | This property identifies each request. |
| [Status](#status-property-mx-component) | The status of the request is empty while in progress. This property is set to OK or to an error message upon completion. |
| [Timeout](#timeout-property-mx-component) | This property includes the timeout for the component. |

## Method List

*The following is the full list of the methods of the component with short descriptions. Click on the links for further details.*

|  |  |
| --- | --- |
| [Config](#config-method-mx-component) | Sets or retrieves a configuration setting. |
| [DoEvents](#doevents-method-mx-component) | This method processes events from the internal message queue. |
| [Interrupt](#interrupt-method-mx-component) | This method interrupts the current method. |
| [Reset](#reset-method-mx-component) | This method will reset the component. |
| [Resolve](#resolve-method-mx-component) | This method resolves an email address. |

## Event List

*The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.*

|  |  |
| --- | --- |
| [Error](#error-event-mx-component) | Fired when information is available about errors during data delivery. |
| [Response](#response-event-mx-component) | This event is fired for each MailServer accepting email for the domain. |

## Config Settings

*The following is a list of config settings for the component with short descriptions. Click on the links for further details.*

|  |  |
| --- | --- |
| [CaptureIPPacketInfo](#CaptureIPPacketInfo) | Used to capture the packet information. |
| [DelayHostResolution](#DelayHostResolution) | Whether the hostname is resolved when RemoteHost is set. |
| [DestinationAddress](#DestinationAddress) | Used to get the destination address from the packet information. |
| [DontFragment](#DontFragment) | Used to set the Don't Fragment flag of outgoing packets. |
| [LocalHost](#LocalHost) | The name of the local host through which connections are initiated or accepted. |
| [LocalPort](#LocalPort) | The port in the local host where the component binds. |
| [MaxPacketSize](#MaxPacketSize) | The maximum length of the packets that can be received. |
| [QOSDSCPValue](#QOSDSCPValue) | Used to specify an arbitrary QOS/DSCP setting (optional). |
| [QOSTrafficType](#QOSTrafficType) | Used to specify QOS/DSCP settings (optional). |
| [ShareLocalPort](#ShareLocalPort) | If set to True, allows more than one instance of the component to be active on the same local port. |
| [UseConnection](#UseConnection) | Determines whether to use a connected socket. |
| [UseIPv6](#UseIPv6) | Whether or not to use IPv6. |
| [AbsoluteTimeout](#AbsoluteTimeout) | Determines whether timeouts are inactivity timeouts or absolute timeouts. |
| [FirewallData](#FirewallData) | Used to send extra data to the firewall. |
| [InBufferSize](#InBufferSize) | The size in bytes of the incoming queue of the socket. |
| [OutBufferSize](#OutBufferSize) | The size in bytes of the outgoing queue of the socket. |
| [BuildInfo](#BuildInfo) | Information about the product's build. |
| [CodePage](#CodePage) | The system code page used for Unicode to Multibyte translations. |
| [LicenseInfo](#LicenseInfo) | Information about the current license. |
| [MaskSensitiveData](#MaskSensitiveData) | Whether sensitive data is masked in log messages. |
| [UseInternalSecurityAPI](#UseInternalSecurityAPI) | Whether or not to use the system security libraries or an internal implementation. |

# DNSPort Property ([MX](#mx-component) Component)

This property includes the port where the DNS server is listening.

## Syntax

*Delphi Syntax*

```text
property DNSPort: Integer read get_DNSPort write set_DNSPort;
```

## Default Value

53

## Remarks

This property contains the port where the DNS server is listening. The default value is 53, but you may set this property to any other value for use with experimental servers and such.

This property is not available at design time.

# DNSServer Property ([MX](#mx-component) Component)

This is the address of the DNS server.

## Syntax

*Delphi Syntax*

```text
property DNSServer: String read get_DNSServer write set_DNSServer;
```

## Default Value

''

## Remarks

This property contains the address of the DNS server. The component attempts to find the default DNS server for the machine where it is installed, and provide it in the DNSServer property. You may change it to any particular DNS server you want to query. While any internet host running a DNS service will suffice, it is preferable to use either the DNS server for your network or the DNS server for the domain that you are querying.

If the component cannot determine the default DNS server address, the property value will be an empty string.

NOTE: Automatic discovery of the default DNS server is not supported in the Java edition.

This property is not available at design time.

# Idle Property ([MX](#mx-component) Component)

The current status of the component.

## Syntax

*Delphi Syntax*

```text
property Idle: Boolean read get_Idle;
```

## Default Value

true

## Remarks

This property will be False if the component is currently busy (communicating or waiting for an answer), and True at all other times.

This property is read-only.

# LocalHost Property ([MX](#mx-component) Component)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

## Syntax

*Delphi Syntax*

```text
property LocalHost: String read get_LocalHost write set_LocalHost;
```

## Default Value

''

## Remarks

This property contains the name of the local host as obtained by the *gethostname()* system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the component initiate connections (or accept in the case of server components) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the component is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

# MailServer Property ([MX](#mx-component) Component)

This property includes the mail server with the lowest precedence value (lowest cost to reach).

## Syntax

*Delphi Syntax*

```text
property MailServer: String read get_MailServer;
```

## Default Value

''

## Remarks

This property contains the mail server with lowest precedence value (lowest cost to reach). After all events are fired, this property holds the name of the best mail server for the supplied email address, and the [Status](#status-property-mx-component) property holds the completion status.

This property is read-only.

# RequestId Property ([MX](#mx-component) Component)

This property identifies each request.

## Syntax

*Delphi Syntax*

```text
property RequestId: Integer read get_RequestId write set_RequestId;
```

## Default Value

0

## Remarks

This property identifies each request. This may be useful if several email addresses need to be resolved. Each request may be identified by the user before starting a query by calling the [Resolve](#resolve-method-mx-component) method.

If a custom value is needed for RequestId, the property must be set before resolving an email address. The component increments RequestId automatically after sending each request.

This property is not available at design time.

# Status Property ([MX](#mx-component) Component)

The status of the request is empty while in progress. This property is set to OK or to an error message upon completion.

## Syntax

*Delphi Syntax*

```text
property Status: String read get_Status;
```

## Default Value

''

## Remarks

This property is reset each time the [Resolve](#resolve-method-mx-component) method is called. When a response comes from the [DNSServer](#dnsserver-property-mx-component), this property is set to "OK" in case of success or to an error message as described in the [Response](#response-event-mx-component) event.

This property is read-only.

# Timeout Property ([MX](#mx-component) Component)

This property includes the timeout for the component.

## Syntax

*Delphi Syntax*

```text
property Timeout: Integer read get_Timeout write set_Timeout;
```

## Default Value

60

## Remarks

If the Timeout property is set to 0, all operations return immediately, potentially failing with a *WOULDBLOCK* error if data cannot be sent immediately.

If Timeout is set to a positive value, data is sent in a blocking manner and the component will wait for the operation to complete before returning control. The component will handle any potential *WOULDBLOCK* errors internally and automatically retry the operation for a maximum of Timeout seconds.

The component will use [DoEvents](#doevents-method-mx-component) to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the component raises an exception.

NOTE: By default, all timeouts are *inactivity timeouts*, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

# Config Method ([MX](#mx-component) Component)

Sets or retrieves a configuration setting.

## Syntax

*Delphi Syntax*

```text
function Config(ConfigurationString: String): String;
```

## Remarks

Config is a generic method available in every component. It is used to set and retrieve [configuration settings](#config-settings-mx-component) for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these *internal properties* is provided through the Config method.

To set a configuration setting named *PROPERTY*, you must call *Config("PROPERTY=VALUE")*, where *VALUE* is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a [configuration setting](#config-settings-mx-component), you must call *Config("PROPERTY")*. The value will be returned as a string.

# DoEvents Method ([MX](#mx-component) Component)

This method processes events from the internal message queue.

## Syntax

*Delphi Syntax*

```text
procedure DoEvents();
```

## Remarks

When DoEvents is called, the component processes any available events. If no events are available, it waits for a preset period of time, and then returns.

# Interrupt Method ([MX](#mx-component) Component)

This method interrupts the current method.

## Syntax

*Delphi Syntax*

```text
procedure Interrupt();
```

## Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

# Reset Method ([MX](#mx-component) Component)

This method will reset the component.

## Syntax

*Delphi Syntax*

```text
procedure Reset();
```

## Remarks

This method will reset the component's properties to their default values.

# Resolve Method ([MX](#mx-component) Component)

This method resolves an email address.

## Syntax

*Delphi Syntax*

```text
procedure Resolve(EmailAddress: String);
```

## Remarks

This method resolves an email address. Calling this method directs the component to query [DNSServer](#dnsserver-property-mx-component) at port [DNSPort](#dnsport-property-mx-component) about MX records related to *EmailAddress*.

The server's response is provided through one or more [Response](#response-event-mx-component) events.

After the query completes, the [MailServer](#mailserver-property-mx-component) property is set to the best mail server and the [Status](#status-property-mx-component) property includes the result description of the response.

Valid queries are email addresses like *name@company.com* or hostnames and domains like *domain.com*.

**Example. Determine Top Priority Mail Server of Email Address:**

```text
MXControl.Resolve "email@server.com"
While MXControl.MailServer = ""
	MXControl.DoEvents()
End While
BestMailServer = MXControl.MailServer
```

# Error Event ([MX](#mx-component) Component)

Fired when information is available about errors during data delivery.

## Syntax

*Delphi Syntax*

```text
type TErrorEvent = procedure (
  Sender: TObject;
  ErrorCode: Integer;
  const Description: String
) of Object;
property OnError: TErrorEvent read FOnError write FOnError;
```

## Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.

The *ErrorCode* parameter contains an error code, and the *Description* parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the [Error Codes](#trappable-errors-mx-component) section.

# Response Event ([MX](#mx-component) Component)

This event is fired for each MailServer accepting email for the domain.

## Syntax

*Delphi Syntax*

```text
type TResponseEvent = procedure (
  Sender: TObject;
  RequestId: Integer;
  const Domain: String;
  const MailServer: String;
  Precedence: Integer;
  TimeToLive: Integer;
  StatusCode: Integer;
  const Description: String;
  Authoritative: Boolean
) of Object;
property OnResponse: TResponseEvent read FOnResponse write FOnResponse;
```

## Remarks

A Response event is fired for each mail server handling email for the requested domain. The *RequestId* parameter identifies the request and equals the value of [RequestId](#requestid-property-mx-component) property right before the [Resolve](#resolve-method-mx-component) method is called. *MailServer* is the name of the server handling the email for the requested *Domain*. A lower *Precedence* value should be preferred. The *TimeToLive* parameter gives the validity time in seconds before the [DNSServer](#dnsserver-property-mx-component) should be queried again.

Possible values for the *StatusCode* and *Description* parameters are as follows:

|  |  |
| --- | --- |
| StatusCode | Description |
| 0 | Ok |
| 1 | Format error |
| 2 | Server failure |
| 3 | Name error |
| 4 | Not implemented |
| 5 | Refused |

After the last Response event is fired, the component sets the [MailServer](#mailserver-property-mx-component) and [Status](#status-property-mx-component) properties to the best *MailServer* and the error or success code, respectively.

# Config Settings ([MX](#mx-component) Component)

 The component accepts one or more of the following *configuration settings*. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these *internal properties* is provided through the [Config](#config-method-mx-component) method.

### UDP Config Settings

**CaptureIPPacketInfo**: Used to capture the packet information.If this is set to True, the component will capture the IP packet information.

The default value for this setting is False.

NOTE: This configuration setting is available only in Windows.

**DelayHostResolution**: Whether the hostname is resolved when RemoteHost is set.This configuration setting specifies whether a hostname is resolved immediately when RemoteHost is set. If *True* the component will resolve the hostname and the IP address will be present in the RemoteHost property. If *False*, the hostname is not resolved until needed by the component when a method to connect or send data is called. If desired, ResolveRemoteHost may be called to manually resolve the value in RemoteHost at any time.

The default value is *False*.

**DestinationAddress**: Used to get the destination address from the packet information.If [CaptureIPPacketInfo](#CaptureIPPacketInfo) is set to True, then this will be populated with the packet's destination address when a packet is received. This information will be accessible in the DataIn event.

NOTE: This configuration setting is available only in Windows.

**DontFragment**: Used to set the Don't Fragment flag of outgoing packets.When set to True, packets sent by the component will have the Don't Fragment flag set. The default value is False.

**LocalHost**: The name of the local host through which connections are initiated or accepted. The [LocalHost](#localhost-property-mx-component) setting contains the name of the local host as obtained by the *gethostname()* system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface), setting LocalHost to the value of an interface will make the component initiate connections (or accept in the case of server components) only through that interface.

If the component is connected, the [LocalHost](#localhost-property-mx-component) setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

**LocalPort**: The port in the local host where the component binds. This configuration setting must be set before a connection is attempted. It instructs the component to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This configuration setting is useful when trying to connect to services that require a trusted port on the client side. An example is the remote shell (rsh) service in UNIX systems.

**MaxPacketSize**: The maximum length of the packets that can be received.This configuration setting specifies the maximum size of the datagrams that the component will accept without truncation.

**QOSDSCPValue**: Used to specify an arbitrary QOS/DSCP setting (optional).[UseConnection](#UseConnection) must be True to use this configuration setting. This option allows you to specify an arbitrary DSCP value between 0 and 63. The default is 0. When set to the default value, the component will not set a DSCP value.

NOTE: This configuration setting uses the qWAVE API and is available only on Windows 7, Windows Server 2008 R2, and later.

**QOSTrafficType**: Used to specify QOS/DSCP settings (optional).[UseConnection](#UseConnection) must be True to use this setting. You may specify either the text or integer values: BestEffort (0), Background (1), ExcellentEffort (2), AudioVideo (3), Voice (4), and Control (5).

NOTE: This configuration setting uses the qWAVE API and is available only on Windows Vista and Windows Server 2008 or above.

NOTE: QOSTrafficType must be set before setting Active to True.

**ShareLocalPort**: If set to True, allows more than one instance of the component to be active on the same local port.This option must be set before the component is activated through the Active property or it will have no effect.

The default value for this setting is False.

**UseConnection**: Determines whether to use a connected socket.[UseConnection](#UseConnection) specifies whether or not the component should use a connected socket. The connection is defined as an association in between the local address/port and the remote address/port. As such, this is not a connection in the traditional Transmission Control Protocol (TCP) sense. It means only that the component will send and receive data to and from the specified destination.

The default value for this setting is False.

**UseIPv6**: Whether or not to use IPv6.By default, the component expects an IPv4 address for local and remote host properties, and it will create an IPv4 socket. To use IPv6 instead, set this to True.

### Socket Config Settings

**AbsoluteTimeout**: Determines whether timeouts are inactivity timeouts or absolute timeouts.If [AbsoluteTimeout](#AbsoluteTimeout) is set to True, any method that does not complete within [Timeout](#timeout-property-mx-component) seconds will be aborted. By default, *AbsoluteTimeout* is False, and the timeout is an inactivity timeout.

NOTE: This option is not valid for User Datagram Protocol (UDP) ports.

**FirewallData**: Used to send extra data to the firewall.When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g., headers for custom authentication schemes).

**InBufferSize**: The size in bytes of the incoming queue of the socket.This is the size of an internal queue in the Transmission Control Protocol (TCP)/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. In some cases, increasing the value of the *InBufferSize* setting can provide significant improvements in performance.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the *InBufferSize* reverts to its defined size. The same happens if you attempt to make it too large or too small.

**OutBufferSize**: The size in bytes of the outgoing queue of the socket.This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. In some cases, increasing the value of the *OutBufferSize* setting can provide significant improvements in performance.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the *OutBufferSize* reverts to its defined size. The same happens if you attempt to make it too large or too small.

### Base Config Settings

**BuildInfo**: Information about the product's build.When queried, this setting will return a string containing information about the product's build.

**CodePage**: The system code page used for Unicode to Multibyte translations.The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:

|  |  |
| --- | --- |
| Identifier | Name |
| 037 | IBM EBCDIC - U.S./Canada |
| 437 | OEM - United States |
| 500 | IBM EBCDIC - International |
| 708 | Arabic - ASMO 708 |
| 709 | Arabic - ASMO 449+, BCON V4 |
| 710 | Arabic - Transparent Arabic |
| 720 | Arabic - Transparent ASMO |
| 737 | OEM - Greek (formerly 437G) |
| 775 | OEM - Baltic |
| 850 | OEM - Multilingual Latin I |
| 852 | OEM - Latin II |
| 855 | OEM - Cyrillic (primarily Russian) |
| 857 | OEM - Turkish |
| 858 | OEM - Multilingual Latin I + Euro symbol |
| 860 | OEM - Portuguese |
| 861 | OEM - Icelandic |
| 862 | OEM - Hebrew |
| 863 | OEM - Canadian-French |
| 864 | OEM - Arabic |
| 865 | OEM - Nordic |
| 866 | OEM - Russian |
| 869 | OEM - Modern Greek |
| 870 | IBM EBCDIC - Multilingual/ROECE (Latin-2) |
| 874 | ANSI/OEM - Thai (same as 28605, ISO 8859-15) |
| 875 | IBM EBCDIC - Modern Greek |
| 932 | ANSI/OEM - Japanese, Shift-JIS |
| 936 | ANSI/OEM - Simplified Chinese (PRC, Singapore) |
| 949 | ANSI/OEM - Korean (Unified Hangul Code) |
| 950 | ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC) |
| 1026 | IBM EBCDIC - Turkish (Latin-5) |
| 1047 | IBM EBCDIC - Latin 1/Open System |
| 1140 | IBM EBCDIC - U.S./Canada (037 + Euro symbol) |
| 1141 | IBM EBCDIC - Germany (20273 + Euro symbol) |
| 1142 | IBM EBCDIC - Denmark/Norway (20277 + Euro symbol) |
| 1143 | IBM EBCDIC - Finland/Sweden (20278 + Euro symbol) |
| 1144 | IBM EBCDIC - Italy (20280 + Euro symbol) |
| 1145 | IBM EBCDIC - Latin America/Spain (20284 + Euro symbol) |
| 1146 | IBM EBCDIC - United Kingdom (20285 + Euro symbol) |
| 1147 | IBM EBCDIC - France (20297 + Euro symbol) |
| 1148 | IBM EBCDIC - International (500 + Euro symbol) |
| 1149 | IBM EBCDIC - Icelandic (20871 + Euro symbol) |
| 1200 | Unicode UCS-2 Little-Endian (BMP of ISO 10646) |
| 1201 | Unicode UCS-2 Big-Endian |
| 1250 | ANSI - Central European |
| 1251 | ANSI - Cyrillic |
| 1252 | ANSI - Latin I |
| 1253 | ANSI - Greek |
| 1254 | ANSI - Turkish |
| 1255 | ANSI - Hebrew |
| 1256 | ANSI - Arabic |
| 1257 | ANSI - Baltic |
| 1258 | ANSI/OEM - Vietnamese |
| 1361 | Korean (Johab) |
| 10000 | MAC - Roman |
| 10001 | MAC - Japanese |
| 10002 | MAC - Traditional Chinese (Big5) |
| 10003 | MAC - Korean |
| 10004 | MAC - Arabic |
| 10005 | MAC - Hebrew |
| 10006 | MAC - Greek I |
| 10007 | MAC - Cyrillic |
| 10008 | MAC - Simplified Chinese (GB 2312) |
| 10010 | MAC - Romania |
| 10017 | MAC - Ukraine |
| 10021 | MAC - Thai |
| 10029 | MAC - Latin II |
| 10079 | MAC - Icelandic |
| 10081 | MAC - Turkish |
| 10082 | MAC - Croatia |
| 12000 | Unicode UCS-4 Little-Endian |
| 12001 | Unicode UCS-4 Big-Endian |
| 20000 | CNS - Taiwan |
| 20001 | TCA - Taiwan |
| 20002 | Eten - Taiwan |
| 20003 | IBM5550 - Taiwan |
| 20004 | TeleText - Taiwan |
| 20005 | Wang - Taiwan |
| 20105 | IA5 IRV International Alphabet No. 5 (7-bit) |
| 20106 | IA5 German (7-bit) |
| 20107 | IA5 Swedish (7-bit) |
| 20108 | IA5 Norwegian (7-bit) |
| 20127 | US-ASCII (7-bit) |
| 20261 | T.61 |
| 20269 | ISO 6937 Non-Spacing Accent |
| 20273 | IBM EBCDIC - Germany |
| 20277 | IBM EBCDIC - Denmark/Norway |
| 20278 | IBM EBCDIC - Finland/Sweden |
| 20280 | IBM EBCDIC - Italy |
| 20284 | IBM EBCDIC - Latin America/Spain |
| 20285 | IBM EBCDIC - United Kingdom |
| 20290 | IBM EBCDIC - Japanese Katakana Extended |
| 20297 | IBM EBCDIC - France |
| 20420 | IBM EBCDIC - Arabic |
| 20423 | IBM EBCDIC - Greek |
| 20424 | IBM EBCDIC - Hebrew |
| 20833 | IBM EBCDIC - Korean Extended |
| 20838 | IBM EBCDIC - Thai |
| 20866 | Russian - KOI8-R |
| 20871 | IBM EBCDIC - Icelandic |
| 20880 | IBM EBCDIC - Cyrillic (Russian) |
| 20905 | IBM EBCDIC - Turkish |
| 20924 | IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol) |
| 20932 | JIS X 0208-1990 & 0121-1990 |
| 20936 | Simplified Chinese (GB2312) |
| 21025 | IBM EBCDIC - Cyrillic (Serbian, Bulgarian) |
| 21027 | Extended Alpha Lowercase |
| 21866 | Ukrainian (KOI8-U) |
| 28591 | ISO 8859-1 Latin I |
| 28592 | ISO 8859-2 Central Europe |
| 28593 | ISO 8859-3 Latin 3 |
| 28594 | ISO 8859-4 Baltic |
| 28595 | ISO 8859-5 Cyrillic |
| 28596 | ISO 8859-6 Arabic |
| 28597 | ISO 8859-7 Greek |
| 28598 | ISO 8859-8 Hebrew |
| 28599 | ISO 8859-9 Latin 5 |
| 28605 | ISO 8859-15 Latin 9 |
| 29001 | Europa 3 |
| 38598 | ISO 8859-8 Hebrew |
| 50220 | ISO 2022 Japanese with no halfwidth Katakana |
| 50221 | ISO 2022 Japanese with halfwidth Katakana |
| 50222 | ISO 2022 Japanese JIS X 0201-1989 |
| 50225 | ISO 2022 Korean |
| 50227 | ISO 2022 Simplified Chinese |
| 50229 | ISO 2022 Traditional Chinese |
| 50930 | Japanese (Katakana) Extended |
| 50931 | US/Canada and Japanese |
| 50933 | Korean Extended and Korean |
| 50935 | Simplified Chinese Extended and Simplified Chinese |
| 50936 | Simplified Chinese |
| 50937 | US/Canada and Traditional Chinese |
| 50939 | Japanese (Latin) Extended and Japanese |
| 51932 | EUC - Japanese |
| 51936 | EUC - Simplified Chinese |
| 51949 | EUC - Korean |
| 51950 | EUC - Traditional Chinese |
| 52936 | HZ-GB2312 Simplified Chinese |
| 54936 | Windows XP: GB18030 Simplified Chinese (4 Byte) |
| 57002 | ISCII Devanagari |
| 57003 | ISCII Bengali |
| 57004 | ISCII Tamil |
| 57005 | ISCII Telugu |
| 57006 | ISCII Assamese |
| 57007 | ISCII Oriya |
| 57008 | ISCII Kannada |
| 57009 | ISCII Malayalam |
| 57010 | ISCII Gujarati |
| 57011 | ISCII Punjabi |
| 65000 | Unicode UTF-7 |
| 65001 | Unicode UTF-8 |

 The following is a list of valid code page identifiers for Mac OS only:

|  |  |
| --- | --- |
| Identifier | Name |
| 1 | ASCII |
| 2 | NEXTSTEP |
| 3 | JapaneseEUC |
| 4 | UTF8 |
| 5 | ISOLatin1 |
| 6 | Symbol |
| 7 | NonLossyASCII |
| 8 | ShiftJIS |
| 9 | ISOLatin2 |
| 10 | Unicode |
| 11 | WindowsCP1251 |
| 12 | WindowsCP1252 |
| 13 | WindowsCP1253 |
| 14 | WindowsCP1254 |
| 15 | WindowsCP1250 |
| 21 | ISO2022JP |
| 30 | MacOSRoman |
| 10 | UTF16String |
| 0x90000100 | UTF16BigEndian |
| 0x94000100 | UTF16LittleEndian |
| 0x8c000100 | UTF32String |
| 0x98000100 | UTF32BigEndian |
| 0x9c000100 | UTF32LittleEndian |
| 65536 | Proprietary |

**LicenseInfo**: Information about the current license.When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

- Product: The product the license is for.
- Product Key: The key the license was generated from.
- License Source: Where the license was found (e.g., RuntimeLicense, License File).
- License Type: The type of license installed (e.g., Royalty Free, Single Server).
- Last Valid Build: The last valid build number for which the license will work.

**MaskSensitiveData**: Whether sensitive data is masked in log messages.In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to *True* to mask sensitive data. The default is *True*.

**UseInternalSecurityAPI**: Whether or not to use the system security libraries or an internal implementation. When set to *False*, the component will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to *True* tells the component to use the internal implementation instead of using the system security libraries.

 This setting is set to *False* by default on all platforms.

# Trappable Errors ([MX](#mx-component) Component)

### MX Errors

|  |  |
| --- | --- |
| 290 | No DNS server specified. |
| 530 | Busy performing current action. |

The component may also return one of the following error codes, which are inherited from other components.

### UDP Errors

|  |  |
| --- | --- |
| 104 | UDP is already Active. |
| 106 | You cannot change the LocalPort while the component is Active. |
| 107 | You cannot change the [LocalHost](#localhost-property-mx-component) at this time. A connection is in progress. |
| 109 | The component must be Active for this operation. |
| 112 | You cannot change [MaxPacketSize](#MaxPacketSize) while the component is Active. |
| 113 | You cannot change [ShareLocalPort](#ShareLocalPort) option while the component is Active. |
| 114 | You cannot change RemoteHost when [UseConnection](#UseConnection) is set and the component Active. |
| 115 | You cannot change RemotePort when [UseConnection](#UseConnection) is set and the component is Active. |
| 116 | RemotePort cannot be zero when [UseConnection](#UseConnection) is set. Please specify a valid service port number. |
| 117 | You cannot change [UseConnection](#UseConnection) while the component is Active. |
| 118 | Message cannot be longer than [MaxPacketSize](#MaxPacketSize). |
| 119 | Message too short. |
| 434 | Unable to convert string to selected CodePage. |

### SSL Errors

|  |  |
| --- | --- |
| 270 | Cannot load specified security library. |
| 271 | Cannot open certificate store. |
| 272 | Cannot find specified certificate. |
| 273 | Cannot acquire security credentials. |
| 274 | Cannot find certificate chain. |
| 275 | Cannot verify certificate chain. |
| 276 | Error during handshake. |
| 280 | Error verifying certificate. |
| 281 | Could not find client certificate. |
| 282 | Could not find server certificate. |
| 283 | Error encrypting data. |
| 284 | Error decrypting data. |

### TCP/IP Errors

|  |  |
| --- | --- |
| 10004 | [10004] Interrupted system call. |
| 10009 | [10009] Bad file number. |
| 10013 | [10013] Access denied. |
| 10014 | [10014] Bad address. |
| 10022 | [10022] Invalid argument. |
| 10024 | [10024] Too many open files. |
| 10035 | [10035] Operation would block. |
| 10036 | [10036] Operation now in progress. |
| 10037 | [10037] Operation already in progress. |
| 10038 | [10038] Socket operation on nonsocket. |
| 10039 | [10039] Destination address required. |
| 10040 | [10040] Message is too long. |
| 10041 | [10041] Protocol wrong type for socket. |
| 10042 | [10042] Bad protocol option. |
| 10043 | [10043] Protocol is not supported. |
| 10044 | [10044] Socket type is not supported. |
| 10045 | [10045] Operation is not supported on socket. |
| 10046 | [10046] Protocol family is not supported. |
| 10047 | [10047] Address family is not supported by protocol family. |
| 10048 | [10048] Address already in use. |
| 10049 | [10049] Cannot assign requested address. |
| 10050 | [10050] Network is down. |
| 10051 | [10051] Network is unreachable. |
| 10052 | [10052] Net dropped connection or reset. |
| 10053 | [10053] Software caused connection abort. |
| 10054 | [10054] Connection reset by peer. |
| 10055 | [10055] No buffer space available. |
| 10056 | [10056] Socket is already connected. |
| 10057 | [10057] Socket is not connected. |
| 10058 | [10058] Cannot send after socket shutdown. |
| 10059 | [10059] Too many references, cannot splice. |
| 10060 | [10060] Connection timed out. |
| 10061 | [10061] Connection refused. |
| 10062 | [10062] Too many levels of symbolic links. |
| 10063 | [10063] File name is too long. |
| 10064 | [10064] Host is down. |
| 10065 | [10065] No route to host. |
| 10066 | [10066] Directory is not empty |
| 10067 | [10067] Too many processes. |
| 10068 | [10068] Too many users. |
| 10069 | [10069] Disc Quota Exceeded. |
| 10070 | [10070] Stale NFS file handle. |
| 10071 | [10071] Too many levels of remote in path. |
| 10091 | [10091] Network subsystem is unavailable. |
| 10092 | [10092] WINSOCK DLL Version out of range. |
| 10093 | [10093] Winsock is not loaded yet. |
| 11001 | [11001] Host not found. |
| 11002 | [11002] Nonauthoritative 'Host not found' (try again or check DNS setup). |
| 11003 | [11003] Nonrecoverable errors: FORMERR, REFUSED, NOTIMP. |
| 11004 | [11004] Valid name, no data record (check DNS setup). |