# XMLSigner Component The XMLSigner component provides a simple interface for digitally signing XML documents according to the XML-Signature Syntax and Processing specification. ## Syntax ```text TsbxXMLSigner ``` ## Remarks XMLSigner implements the most basic XML-SIG signature standard. While this format is still quite widely used, it lacks important facilities that have been gaining popularity in recent years, such as strict chain validation, support for trust environments, and long-term signatures (also known as XAdES). If you are looking for XAdES support, please consider using the alternative [XAdESSigner](XAdESSigner.md#XAdESSigner) component. To sign XML data with XMLSigner, you need to specify the data to be signed using the References property first, then select the signature type and signature method type (signature or MAC). References are individual pieces of the XML document that are covered by the signature. You can choose to sign the whole document or one or more individual elements. Set the path to the file to be signed via the [InputFile](#inputfile-property-xmlsigner-component) (or [InputBytes](#inputbytes-property-xmlsigner-component)). Signed data will be saved in [OutputBytes](#outputbytes-property-xmlsigner-component), or the [OutputFile](#outputfile-property-xmlsigner-component) if provided. Finally, call the [Sign](#sign-method-xmlsigner-component) method to generate a signature and save the signed data. XMLSigner supports the two product-wide external signing approaches for signing with remote private keys: use [SignExternal](#signexternal-method-xmlsigner-component) or [SignAsyncBegin](#signasyncbegin-method-xmlsigner-component) to do this as required. ```text XmlSigner.InputFile = "data.xml"; XmlSigner.OutputFile = "data-signed.xml"; XmlSigner.SigningCertificate = CertMgr.Certificate; XmlSigner.Sign(); ``` ## Property List *The following is the full list of the properties of the component with short descriptions. Click on the links for further details.* | | | | --- | --- | | [CanonicalizationMethod](#canonicalizationmethod-property-xmlsigner-component) | Specifies XML canonicalization method to use. | | [DataBytes](#databytes-property-xmlsigner-component) | Use this property to pass the external data to component in the byte array form. | | [DataFile](#datafile-property-xmlsigner-component) | A file containing the external data covered by a detached signature. | | [DataType](#datatype-property-xmlsigner-component) | Specifies the external data type. | | [DataURI](#datauri-property-xmlsigner-component) | Specifies a detached data resource URI. | | [Encoding](#encoding-property-xmlsigner-component) | Specifies XML encoding. | | [ExternalCryptoAsyncDocumentID](#externalcryptoasyncdocumentid-property-xmlsigner-component) | Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls. | | [ExternalCryptoCustomParams](#externalcryptocustomparams-property-xmlsigner-component) | Custom parameters to be passed to the signing service (uninterpreted). | | [ExternalCryptoData](#externalcryptodata-property-xmlsigner-component) | Additional data to be included in the async state and mirrored back by the requestor. | | [ExternalCryptoExternalHashCalculation](#externalcryptoexternalhashcalculation-property-xmlsigner-component) | Specifies whether the message hash is to be calculated at the external endpoint. | | [ExternalCryptoHashAlgorithm](#externalcryptohashalgorithm-property-xmlsigner-component) | Specifies the request's signature hash algorithm. | | [ExternalCryptoKeyID](#externalcryptokeyid-property-xmlsigner-component) | The ID of the pre-shared key used for DC request authentication. | | [ExternalCryptoKeySecret](#externalcryptokeysecret-property-xmlsigner-component) | The pre-shared key used for DC request authentication. | | [ExternalCryptoMethod](#externalcryptomethod-property-xmlsigner-component) | Specifies the asynchronous signing method. | | [ExternalCryptoMode](#externalcryptomode-property-xmlsigner-component) | Specifies the external cryptography mode. | | [ExternalCryptoPublicKeyAlgorithm](#externalcryptopublickeyalgorithm-property-xmlsigner-component) | Provide the public key algorithm here if the certificate is not available on the pre-signing stage. | | [FIPSMode](#fipsmode-property-xmlsigner-component) | Reserved. | | [HashAlgorithm](#hashalgorithm-property-xmlsigner-component) | Specifies the hash algorithm to be used. | | [InputBytes](#inputbytes-property-xmlsigner-component) | Use this property to pass the input to component in byte array form. | | [InputFile](#inputfile-property-xmlsigner-component) | Specifies the XML document to be signed. | | [OutputBytes](#outputbytes-property-xmlsigner-component) | Use this property to read the output the component object has produced. | | [OutputFile](#outputfile-property-xmlsigner-component) | A file where the signed document is to be saved. | | [ReferenceCount](#referencecount-property-xmlsigner-component) | The number of records in the Reference arrays. | | [ReferenceAutoGenerateElementId](#referenceautogenerateelementid-property-xmlsigner-component) | Specifies whether the identifier (ID) attribute for a referenced (target) element should be auto-generated during signing. | | [ReferenceCanonicalizationMethod](#referencecanonicalizationmethod-property-xmlsigner-component) | Use this property to specify the canonicalization method for the transform of the reference. | | [ReferenceCustomElementId](#referencecustomelementid-property-xmlsigner-component) | Specifies a custom identifier (ID) attribute for a referenced (target) element that will be set on signing. | | [ReferenceDigestValue](#referencedigestvalue-property-xmlsigner-component) | Use this property to get or set the value of the digest calculated over the referenced data. | | [ReferenceHandle](#referencehandle-property-xmlsigner-component) | Allows to get or set a 'handle', a unique identifier of the underlying property object. | | [ReferenceHashAlgorithm](#referencehashalgorithm-property-xmlsigner-component) | Specifies the hash algorithm to be used. | | [ReferenceHasURI](#referencehasuri-property-xmlsigner-component) | Specifies whether the URI is set (even when it is empty). | | [ReferenceID](#referenceid-property-xmlsigner-component) | A user-defined identifier (ID) attribute of this Reference element. | | [ReferenceInclusiveNamespacesPrefixList](#referenceinclusivenamespacesprefixlist-property-xmlsigner-component) | Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the reference. | | [ReferenceType](#referencetype-property-xmlsigner-component) | The Reference's type attribute as defined in XMLDSIG specification. | | [ReferenceTargetData](#referencetargetdata-property-xmlsigner-component) | Contains the referenced external data when the digest value is not explicitly specified. | | [ReferenceTargetType](#referencetargettype-property-xmlsigner-component) | The reference's target type to use. | | [ReferenceTargetXMLElement](#referencetargetxmlelement-property-xmlsigner-component) | This property specifies the referenced XML element. | | [ReferenceURI](#referenceuri-property-xmlsigner-component) | Use this property to get or set the URL which references the data. | | [ReferenceUseBase64Transform](#referenceusebase64transform-property-xmlsigner-component) | Specifies whether Base64 transform is included in transform chain. | | [ReferenceUseEnvelopedSignatureTransform](#referenceuseenvelopedsignaturetransform-property-xmlsigner-component) | Specifies whether enveloped signature transform is included in transform chain. | | [ReferenceUseXPathFilter2Transform](#referenceusexpathfilter2transform-property-xmlsigner-component) | Specifies whether XPath Filter 2. | | [ReferenceUseXPathTransform](#referenceusexpathtransform-property-xmlsigner-component) | Specifies whether XPath transform is included in transform chain. | | [ReferenceValidationResult](#referencevalidationresult-property-xmlsigner-component) | The outcome of the cryptographic reference validation. | | [ReferenceXPathExpression](#referencexpathexpression-property-xmlsigner-component) | Use this property to specify XPath expression for XPath transform of the reference. | | [ReferenceXPathFilter2Expressions](#referencexpathfilter2expressions-property-xmlsigner-component) | Use this property to specify XPointer expression(s) for XPath Filter 2. | | [ReferenceXPathFilter2Filters](#referencexpathfilter2filters-property-xmlsigner-component) | Use this property to specify XPointer filter(s) for XPath Filter 2. | | [ReferenceXPathFilter2PrefixList](#referencexpathfilter2prefixlist-property-xmlsigner-component) | Use this property to specify a prefix list for XPath Filter 2. | | [ReferenceXPathPrefixList](#referencexpathprefixlist-property-xmlsigner-component) | Use this property to specify a prefix list for XPath transform of the reference. | | [SignatureType](#signaturetype-property-xmlsigner-component) | The signature type to employ when signing the document. | | [SigningCertBytes](#signingcertbytes-property-xmlsigner-component) | Returns the raw certificate data in DER format. | | [SigningCertHandle](#signingcerthandle-property-xmlsigner-component) | Allows to get or set a 'handle', a unique identifier of the underlying property object. | | [SigningChainCount](#signingchaincount-property-xmlsigner-component) | The number of records in the SigningChain arrays. | | [SigningChainBytes](#signingchainbytes-property-xmlsigner-component) | Returns the raw certificate data in DER format. | | [SigningChainHandle](#signingchainhandle-property-xmlsigner-component) | Allows to get or set a 'handle', a unique identifier of the underlying property object. | | [XMLElement](#xmlelement-property-xmlsigner-component) | Specifies the XML element where to save the signature data. | ## Method List *The following is the full list of the methods of the component with short descriptions. Click on the links for further details.* | | | | --- | --- | | [AddDataReference](#adddatareference-method-xmlsigner-component) | Creates a new XML reference to the specified data. | | [AddKnownNamespace](#addknownnamespace-method-xmlsigner-component) | Adds known prefix and correspondent namespace URI. | | [AddReference](#addreference-method-xmlsigner-component) | Creates a new XML reference to the specified XML element. | | [Config](#config-method-xmlsigner-component) | Sets or retrieves a configuration setting. | | [DoAction](#doaction-method-xmlsigner-component) | Performs an additional action. | | [ExtractAsyncData](#extractasyncdata-method-xmlsigner-component) | Extracts user data from the DC signing service response. | | [GetInnerXML](#getinnerxml-method-xmlsigner-component) | Get the inner XML content of the selected XML element. | | [GetOuterXML](#getouterxml-method-xmlsigner-component) | Get the outer XML content of the selected XML element. | | [GetTextContent](#gettextcontent-method-xmlsigner-component) | Get the text content of the selected XML element. | | [Reset](#reset-method-xmlsigner-component) | Resets the component settings. | | [SetInnerXML](#setinnerxml-method-xmlsigner-component) | Set the inner XML content of the selected XML element. | | [SetTextContent](#settextcontent-method-xmlsigner-component) | Set the text content of the selected XML element. | | [Sign](#sign-method-xmlsigner-component) | Signs an XML document. | | [SignAsyncBegin](#signasyncbegin-method-xmlsigner-component) | Initiates the asynchronous signing operation. | | [SignAsyncEnd](#signasyncend-method-xmlsigner-component) | Completes the asynchronous signing operation. | | [SignExternal](#signexternal-method-xmlsigner-component) | Signs the document using an external signing facility. | ## Event List *The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.* | | | | --- | --- | | [Error](#error-event-xmlsigner-component) | Reports the details of signing errors. | | [ExternalSign](#externalsign-event-xmlsigner-component) | Handles remote or external signing initiated by the SignExternal method or other source. | | [FormatElement](#formatelement-event-xmlsigner-component) | Reports the XML element that is currently being processed. | | [FormatText](#formattext-event-xmlsigner-component) | Reports XML text that is currently being processed. | | [Notification](#notification-event-xmlsigner-component) | This event notifies the application about an underlying control flow event. | | [ResolveReference](#resolvereference-event-xmlsigner-component) | Asks the application to resolve a reference. | ## Config Settings *The following is a list of config settings for the component with short descriptions. Click on the links for further details.* | | | | --- | --- | | [AddAllDataObjectsTimestamp](#AddAllDataObjectsTimestamp) | Whether to add all data objects timestamp during signing. | | [AsyncDocumentID](#AsyncDocumentID) | Specifies the document ID for SignAsyncEnd() call. | | [CachedCRLMaxAge](#CachedCRLMaxAge) | Specifies the maximum age of a cached CRL. | | [CachedCRLMaxAgeRatio](#CachedCRLMaxAgeRatio) | Specifies the maximum age of a cached CRL as a percentage of its remaining lifetime. | | [CachedCRLOverlapTime](#CachedCRLOverlapTime) | Specifies the time period before a cached CRL's NextUpdate when it is considered stale and must be refreshed. | | [CachedOCSPResponseMaxAge](#CachedOCSPResponseMaxAge) | Specifies the maximum age of a cached OCSP response. | | [CachedOCSPResponseMaxAgeRatio](#CachedOCSPResponseMaxAgeRatio) | Specifies the maximum age of a cached OCSP response as a percentage of its remaining lifetime. | | [CachedOCSPResponseOverlapTime](#CachedOCSPResponseOverlapTime) | Specifies the time period before a cached OCSP response's NextUpdate when it is considered stale and must be refreshed. | | [ChainCurrentCACert](#ChainCurrentCACert) | Returns the current CA certificate. | | [ChainCurrentCert](#ChainCurrentCert) | Returns the certificate that is currently being validated. | | [ChainCurrentCRL](#ChainCurrentCRL) | Returns the current CRL. | | [ChainCurrentCRLSize](#ChainCurrentCRLSize) | Returns the size of the current CRL. | | [ChainCurrentOCSP](#ChainCurrentOCSP) | Returns the current OCSP response. | | [ChainCurrentOCSPSigner](#ChainCurrentOCSPSigner) | Returns the signer of the current OCSP object. | | [ChainInterimDetails](#ChainInterimDetails) | Returns the current interim validation details. | | [ChainInterimResult](#ChainInterimResult) | Returns the current interim validation result. | | [CheckValidityPeriodForTrusted](#CheckValidityPeriodForTrusted) | Whether to check validity period for trusted certificates. | | [ClaimedRolesXML](#ClaimedRolesXML) | The XML content of the claimed roles. | | [ClaimedRoleText](#ClaimedRoleText) | The text of the claimed role. | | [CommitmentTypeIndicationAllSignedDataObjects\[Index\]](#CommitmentTypeIndicationAllSignedDataObjects[Index]) | Specifies the CommitmentTypeIndication's AllSignedDataObjects. | | [CommitmentTypeIndicationCount](#CommitmentTypeIndicationCount) | The number of the CommitmentTypeIndication elements. | | [CommitmentTypeIndicationIdentifier\[Index\]](#CommitmentTypeIndicationIdentifier[Index]) | Specifies the CommitmentTypeIndication's CommitmentTypeId's Identifier. | | [CommitmentTypeIndicationIdentifierDescription\[Index\]](#CommitmentTypeIndicationIdentifierDescription[Index]) | Specifies the CommitmentTypeIndication's CommitmentTypeId's Description. | | [CommitmentTypeIndicationIdentifierDocumentationReferences\[Index\]](#CommitmentTypeIndicationIdentifierDocumentationReferences[Index]) | Specifies the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences. | | [CommitmentTypeIndicationIdentifierQualifier\[Index\]](#CommitmentTypeIndicationIdentifierQualifier[Index]) | Specifies the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier. | | [CommitmentTypeIndicationObjectReference\[Index\]](#CommitmentTypeIndicationObjectReference[Index]) | Specifies the CommitmentTypeIndication's ObjectReference. | | [CommitmentTypeIndicationQualifiersXML\[Index\]](#CommitmentTypeIndicationQualifiersXML[Index]) | The XML content of the CommitmentTypeIndication's Qualifiers. | | [CustomTrustedLists](#CustomTrustedLists) | Specifies the custom TrustedLists. | | [CustomTSLs](#CustomTSLs) | Specifies the custom TrustedLists. | | [DataObjectFormatCount](#DataObjectFormatCount) | The number of the DataObjectFormat elements. | | [DataObjectFormatDescription\[Index\]](#DataObjectFormatDescription[Index]) | Specifies the DataObjectFormat's Description. | | [DataObjectFormatEncoding\[Index\]](#DataObjectFormatEncoding[Index]) | Specifies the DataObjectFormat's Encoding. | | [DataObjectFormatMimeType\[Index\]](#DataObjectFormatMimeType[Index]) | Specifies the DataObjectFormat's MimeType. | | [DataObjectFormatObjectIdentifier\[Index\]](#DataObjectFormatObjectIdentifier[Index]) | Specifies the DataObjectFormat's ObjectIdentifier's Identifier. | | [DataObjectFormatObjectIdentifierDescription\[Index\]](#DataObjectFormatObjectIdentifierDescription[Index]) | Specifies the DataObjectFormat's ObjectIdentifier's Description. | | [DataObjectFormatObjectIdentifierDocumentationReferences\[Index\]](#DataObjectFormatObjectIdentifierDocumentationReferences[Index]) | Specifies the DataObjectFormat's ObjectIdentifier's DocumentationReferences. | | [DataObjectFormatObjectIdentifierQualifier\[Index\]](#DataObjectFormatObjectIdentifierQualifier[Index]) | Specifies the DataObjectFormat's ObjectIdentifier's IdentifierQualifier. | | [DataObjectFormatObjectReference\[Index\]](#DataObjectFormatObjectReference[Index]) | Specifies the DataObjectFormat's ObjectReference. | | [DataType](#DataType) | Specifies the external data type. | | [DeltaCRLPreference](#DeltaCRLPreference) | Specifies whether complete or delta CRLs are preferred. | | [DetachedResourceURI](#DetachedResourceURI) | Specifies a detached resource URI. | | [DislikeOpenEndedOCSPs](#DislikeOpenEndedOCSPs) | Tells the component to discourage OCSP responses without an explicit NextUpdate parameter. | | [EnvelopingObjectEncoding](#EnvelopingObjectEncoding) | Specifies the enveloping object encoding. | | [EnvelopingObjectID](#EnvelopingObjectID) | Specifies the enveloping object identifier. | | [EnvelopingObjectMimeType](#EnvelopingObjectMimeType) | Specifies the enveloping object MIME type. | | [EvaluateSystemTrust](#EvaluateSystemTrust) | Enables or disables usage of the platform's built-in trust validation facilities. | | [EvaluateSystemTrustForSelfSignedCertificates](#EvaluateSystemTrustForSelfSignedCertificates) | Enables or disables usage of the platform's built-in trust validation facilities for self-signed certificates. | | [EvaluateSystemTrustForSSL](#EvaluateSystemTrustForSSL) | Enables or disables usage of the platform's built-in trust validation facilities for SSL/TLS. | | [ExclusiveCanonicalizationPrefix](#ExclusiveCanonicalizationPrefix) | Specifies the exclusive canonicalization prefix. | | [ForceCompleteChainValidation](#ForceCompleteChainValidation) | Whether to check the CA certificates when the signing certificate is invalid. | | [ForceCompleteChainValidationForTrusted](#ForceCompleteChainValidationForTrusted) | Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors. | | [GracePeriod](#GracePeriod) | Specifies a grace period to apply during revocation information checks. | | [HMACKey](#HMACKey) | The key value for HMAC. | | [HMACOutputLength](#HMACOutputLength) | Sets the length of the HMAC output. | | [HMACSigningUsed](#HMACSigningUsed) | Whether to use HMAC signing. | | [IDAttributeName](#IDAttributeName) | Specifies the custom name of ID attribute. | | [IDAttributeNamespaceURI](#IDAttributeNamespaceURI) | Specifies the custom namespace URI of ID attribute. | | [IgnoreChainLoops](#IgnoreChainLoops) | Whether chain loops should be ignored. | | [IgnoreChainValidationErrors](#IgnoreChainValidationErrors) | Whether to ignore any certificate chain validation issues. | | [IgnoreOCSPNoCheckExtension](#IgnoreOCSPNoCheckExtension) | Whether the OCSP NoCheck extension should be ignored. | | [IgnoreSystemTrust](#IgnoreSystemTrust) | Whether trusted Windows Certificate Stores should be treated as trusted. | | [IgnoreTimestampFailure](#IgnoreTimestampFailure) | Whether to ignore time-stamping failure during signing. | | [ImplicitlyTrustSelfSignedCertificates](#ImplicitlyTrustSelfSignedCertificates) | Whether to trust self-signed certificates. | | [IncludeKey](#IncludeKey) | Specifies whether to include the signing key to the signature. | | [IncludeKeyValue](#IncludeKeyValue) | Specifies whether the key value must be included to the signature. | | [IncludeKnownRevocationInfoToSignature](#IncludeKnownRevocationInfoToSignature) | Whether to include custom revocation info to the signature. | | [InclusiveNamespacesPrefixList](#InclusiveNamespacesPrefixList) | Specifies the InclusiveNamespaces PrefixList. | | [InputType](#InputType) | Specifies the Input type. | | [InsertBeforeXMLElement](#InsertBeforeXMLElement) | Defines the reference XML element for signature insertion. | | [KeyInfoCustomXML](#KeyInfoCustomXML) | The custom XML content for KeyInfo element. | | [KeyInfoDetails](#KeyInfoDetails) | Specifies the signing key info details to include to the signature. | | [KeyInfoID](#KeyInfoID) | Specifies the ID for KeyInfo element. | | [KeyInfoX509Chain](#KeyInfoX509Chain) | Specifies which certificates from SigningChain are included in the ds:KeyInfo element. | | [KeyName](#KeyName) | Contains information about the key used for signing. | | [ManifestCount](#ManifestCount) | TBD. | | [ManifestID\[i\]](#ManifestID[i]) | TBD. | | [ManifestObjectIndex\[i\]](#ManifestObjectIndex[i]) | TBD. | | [ManifestXML\[i\]](#ManifestXML[i]) | TBD. | | [NormalizeNewLine](#NormalizeNewLine) | Controls whether newline combinations should be automatically normalized. | | [ObjectCount](#ObjectCount) | TBD. | | [ObjectEncoding\[i\]](#ObjectEncoding[i]) | TBD. | | [ObjectID\[i\]](#ObjectID[i]) | TBD. | | [ObjectMimeType\[i\]](#ObjectMimeType[i]) | TBD. | | [ObjectSignaturePropertiesCount](#ObjectSignaturePropertiesCount) | TBD. | | [ObjectSignaturePropertiesID\[i\]](#ObjectSignaturePropertiesID[i]) | TBD. | | [ObjectSignaturePropertiesObjectIndex\[i\]](#ObjectSignaturePropertiesObjectIndex[i]) | TBD. | | [ObjectSignaturePropertiesXML\[i\]](#ObjectSignaturePropertiesXML[i]) | TBD. | | [ObjectSignaturePropertyCount](#ObjectSignaturePropertyCount) | TBD. | | [ObjectSignaturePropertyID\[i\]](#ObjectSignaturePropertyID[i]) | TBD. | | [ObjectSignaturePropertyPropertiesIndex\[i\]](#ObjectSignaturePropertyPropertiesIndex[i]) | TBD. | | [ObjectSignaturePropertyTarget\[i\]](#ObjectSignaturePropertyTarget[i]) | TBD. | | [ObjectSignaturePropertyXML\[i\]](#ObjectSignaturePropertyXML[i]) | TBD. | | [ObjectXML\[i\]](#ObjectXML[i]) | TBD. | | [PolicyDescription](#PolicyDescription) | signature policy description. | | [PolicyExplicitText](#PolicyExplicitText) | The explicit text of the user notice. | | [PolicyUNNumbers](#PolicyUNNumbers) | The noticeNumbers part of the NoticeReference CAdES attribute. | | [PolicyUNOrganization](#PolicyUNOrganization) | The organization part of the NoticeReference qualifier. | | [ProductionPlace](#ProductionPlace) | Identifies the place of the signature production. | | [PromoteLongOCSPResponses](#PromoteLongOCSPResponses) | Whether long OCSP responses are requested. | | [PSSUsed](#PSSUsed) | Whether to use RSASSA-PSS algorithm. | | [QualifyingPropertiesID](#QualifyingPropertiesID) | Specifies the ID for QualifyingProperties element. | | [QualifyingPropertiesObjectID](#QualifyingPropertiesObjectID) | Specifies the ID for object with QualifyingProperties element. | | [QualifyingPropertiesReferenceCount](#QualifyingPropertiesReferenceCount) | The number of the QualifyingPropertiesReference elements. | | [QualifyingPropertiesReferenceID\[Index\]](#QualifyingPropertiesReferenceID[Index]) | Specifies the QualifyingPropertiesReference's ID. | | [QualifyingPropertiesReferenceURI\[Index\]](#QualifyingPropertiesReferenceURI[Index]) | Specifies the QualifyingPropertiesReference's URI. | | [RefsTimestampType](#RefsTimestampType) | Specifies references timestamp type to include to the signature. | | [RevocationCacheAgePolicy](#RevocationCacheAgePolicy) | Specifies a preset policy for cached CRL and OCSP response freshness settings. | | [SchemeParams](#SchemeParams) | The algorithm scheme parameters to employ. | | [SignatureCompliance](#SignatureCompliance) | Specifies the signature compliance mode. | | [SignatureID](#SignatureID) | Specifies the ID for Signature element. | | [SignaturePrefix](#SignaturePrefix) | Specifies the signature prefix. | | [SignatureValueID](#SignatureValueID) | Specifies the ID for SignatureValue element. | | [SignedInfoID](#SignedInfoID) | Specifies the ID for SignedInfo element. | | [SignedPropertiesID](#SignedPropertiesID) | Specifies the ID for SignedProperties element. | | [SignedPropertiesReferenceCanonicalizationMethod](#SignedPropertiesReferenceCanonicalizationMethod) | Specifies the canonicalization method used in SignedProperties reference. | | [SignedPropertiesReferenceHashAlgorithm](#SignedPropertiesReferenceHashAlgorithm) | Specifies the hash algorithm used in SignedProperties reference. | | [SignedPropertiesReferenceID](#SignedPropertiesReferenceID) | Specifies the ID for Reference element that points to SignedProperties element. | | [SignedPropertiesReferenceInclusiveNamespacesPrefixList](#SignedPropertiesReferenceInclusiveNamespacesPrefixList) | Specifies the InclusiveNamespaces PrefixList used in SignedProperties reference. | | [SignedPropertiesReferenceIndex](#SignedPropertiesReferenceIndex) | Specifies the index of SignedProperties reference. | | [SignedSignaturePropertiesID](#SignedSignaturePropertiesID) | Specifies the ID for SignedSignatureProperties element. | | [SigningCertificatesChain](#SigningCertificatesChain) | Specifies which certificates from SigningChain are included in the xades:SigningCertificate element. | | [SigningCertificatesHashAlgorithm](#SigningCertificatesHashAlgorithm) | Specifies the hash algorithm used for SigningCertificates. | | [SigningTimeFormat](#SigningTimeFormat) | Specifies the date time format for the XAdES signing time. | | [SigningTimeIsUTC](#SigningTimeIsUTC) | Specifies whether the XAdES signing time is in UTC. | | [SigningTimeZoneOffset](#SigningTimeZoneOffset) | Specifies the time zone offset for the XAdES signing time. | | [SigPolicyDescription](#SigPolicyDescription) | signature policy description. | | [SigPolicyExplicitText](#SigPolicyExplicitText) | The explicit text of the user notice. | | [SigPolicyHash](#SigPolicyHash) | The EPES policy hash. | | [SigPolicyHashAlgorithm](#SigPolicyHashAlgorithm) | The hash algorithm that was used to generate the EPES policy hash. | | [SigPolicyID](#SigPolicyID) | The EPES policy ID. | | [SigPolicyNoticeNumbers](#SigPolicyNoticeNumbers) | The noticeNumbers part of the NoticeReference CAdES attribute. | | [SigPolicyNoticeOrganization](#SigPolicyNoticeOrganization) | The organization part of the NoticeReference qualifier. | | [SigPolicyURI](#SigPolicyURI) | The EPES policy URI. | | [StripWhitespace](#StripWhitespace) | Controls whether excessive whitespace characters should be stripped off when loading the document. | | [TempPath](#TempPath) | Path for storing temporary files. | | [TimestampCanonicalizationMethod](#TimestampCanonicalizationMethod) | Specifies canonicalization method used in timestamp. | | [TimestampResponse](#TimestampResponse) | A base16-encoded timestamp response received from a TSA. | | [TimestampValidationDataDetails](#TimestampValidationDataDetails) | Specifies timestamp validation data details to include to the signature. | | [TLSChainValidationDetails](#TLSChainValidationDetails) | Contains the advanced details of the TLS server certificate validation. | | [TLSChainValidationResult](#TLSChainValidationResult) | Contains the result of the TLS server certificate validation. | | [TLSClientAuthRequested](#TLSClientAuthRequested) | Indicates whether the TLS server requests client authentication. | | [TLSValidationLog](#TLSValidationLog) | Contains the log of the TLS server certificate validation. | | [TolerateMinorChainIssues](#TolerateMinorChainIssues) | Whether to tolerate minor chain issues. | | [TspAttemptCount](#TspAttemptCount) | Specifies the number of timestamping request attempts. | | [TspHashAlgorithm](#TspHashAlgorithm) | Sets a specific hash algorithm for use with the timestamping service. | | [TspReqPolicy](#TspReqPolicy) | Sets a request policy ID to include in the timestamping request. | | [UseCustomTransformOrder](#UseCustomTransformOrder) | Enables custom ordering for the document transforms. | | [UseDefaultTrustedLists](#UseDefaultTrustedLists) | Enables or disables the use of the default TrustedLists. | | [UseDefaultTSLs](#UseDefaultTSLs) | Enables or disables the use of the default TrustedLists. | | [UseEnvStorages](#UseEnvStorages) | Enables or disables use of the environment storages. | | [UseHMACSigning](#UseHMACSigning) | Whether to use HMAC signing. | | [UseMicrosoftCTL](#UseMicrosoftCTL) | Enables or disables the automatic use of the Microsoft online certificate trust list. | | [UseMultipleX509DataNodes](#UseMultipleX509DataNodes) | Controls whether certificates are serialized in multiple ds:X509Data nodes under ds:KeyInfo. | | [UsePSS](#UsePSS) | Whether to use RSASSA-PSS algorithm. | | [UseSystemCertificates](#UseSystemCertificates) | Enables or disables the use of the system certificates. | | [UseValidationCache](#UseValidationCache) | Enables or disable the use of the product-wide certificate chain validation cache. | | [UseValidatorSettingsForTLSValidation](#UseValidatorSettingsForTLSValidation) | Whether to employ the primary chain validator setup for auxiliary TLS chain validations. | | [ValidationDataRefsDetails](#ValidationDataRefsDetails) | Specifies validation data references details to include to the signature. | | [ValidationDataRefsHashAlgorithm](#ValidationDataRefsHashAlgorithm) | Specifies the hash algorithm used in validation data references. | | [ValidationDataValuesDetails](#ValidationDataValuesDetails) | Specifies validation data values details to include to the signature. | | [WriteBOM](#WriteBOM) | Specifies whether byte-order mark should be written when saving the document. | | [XAdESPrefix](#XAdESPrefix) | Specifies the XAdES prefix. | | [XAdESv141Prefix](#XAdESv141Prefix) | Specifies the XAdES v1.4.1 prefix. | | [XMLFormatting](#XMLFormatting) | Specifies the signature XML formatting. | | [XMLSerializationCanonicalizationMethod](#XMLSerializationCanonicalizationMethod) | Specifies the canonicalization method to use for serialization. | | [XMLSerializationMode](#XMLSerializationMode) | Specifies the serialization mode for the extracted part of XML document. | | [ASN1UseGlobalTagCache](#ASN1UseGlobalTagCache) | Controls whether ASN.1 module should use a global object cache. | | [AssignSystemSmartCardPins](#AssignSystemSmartCardPins) | Specifies whether CSP-level PINs should be assigned to CNG keys. | | [CheckKeyIntegrityBeforeUse](#CheckKeyIntegrityBeforeUse) | Enables or disable private key integrity check before use. | | [CookieCaching](#CookieCaching) | Specifies whether a cookie cache should be used for HTTP(S) transports. | | [Cookies](#Cookies) | Gets or sets local cookies for the component. | | [DefDeriveKeyIterations](#DefDeriveKeyIterations) | Specifies the default key derivation algorithm iteration count. | | [DNSLocalSuffix](#DNSLocalSuffix) | The suffix to assign for TLD names. | | [EnableClientSideSSLFFDHE](#EnableClientSideSSLFFDHE) | Enables or disables finite field DHE key exchange support in TLS clients. | | [EnableSSHMLKEM](#EnableSSHMLKEM) | Enables support for ML-KEM/hybrid key exchange algorithms in SSH client and server components. | | [EnableTLSMLKEM](#EnableTLSMLKEM) | Enables support for ML-KEM and hybrid groups in TLS client and server components. | | [GlobalCookies](#GlobalCookies) | Gets or sets global cookies for all the HTTP transports. | | [HardwareCryptoUsePolicy](#HardwareCryptoUsePolicy) | The hardware crypto usage policy. | | [HttpUserAgent](#HttpUserAgent) | Specifies the user agent name to be used by all HTTP clients. | | [HttpVersion](#HttpVersion) | The HTTP version to use in any inner HTTP client components created. | | [IgnoreExpiredMSCTLSigningCert](#IgnoreExpiredMSCTLSigningCert) | Whether to tolerate the expired Windows Update signing certificate. | | [ListDelimiter](#ListDelimiter) | The delimiter character for multi-element lists. | | [LogDestination](#LogDestination) | Specifies the debug log destination. | | [LogDetails](#LogDetails) | Specifies the debug log details to dump. | | [LogFile](#LogFile) | Specifies the debug log filename. | | [LogFilters](#LogFilters) | Specifies the debug log filters. | | [LogFlushMode](#LogFlushMode) | Specifies the log flush mode. | | [LogLevel](#LogLevel) | Specifies the debug log level. | | [LogMaxEventCount](#LogMaxEventCount) | Specifies the maximum number of events to cache before further action is taken. | | [LogRotationMode](#LogRotationMode) | Specifies the log rotation mode. | | [MaxASN1BufferLength](#MaxASN1BufferLength) | Specifies the maximal allowed length for ASN.1 primitive tag data. | | [MaxASN1TreeDepth](#MaxASN1TreeDepth) | Specifies the maximal depth for processed ASN.1 trees. | | [OCSPHashAlgorithm](#OCSPHashAlgorithm) | Specifies the hash algorithm to be used to identify certificates in OCSP requests. | | [OldClientSideRSAFallback](#OldClientSideRSAFallback) | Specifies whether the SSH client should use a SHA1 fallback. | | [PKICache](#PKICache) | Specifies which PKI elements (certificates, CRLs, OCSP responses) should be cached. | | [PKICachePath](#PKICachePath) | Specifies the file system path where cached PKI data is stored. | | [ProductVersion](#ProductVersion) | Returns the version of the SecureBlackbox library. | | [ServerSSLDHKeyLength](#ServerSSLDHKeyLength) | Sets the size of the TLS DHE key exchange group. | | [StaticDNS](#StaticDNS) | Specifies whether static DNS rules should be used. | | [StaticIPAddress\[domain\]](#StaticIPAddress[domain]) | Gets or sets an IP address for the specified domain name. | | [StaticIPAddresses](#StaticIPAddresses) | Gets or sets all the static DNS rules. | | [Tag](#Tag) | Allows to store any custom data. | | [TLSSessionGroup](#TLSSessionGroup) | Specifies the group name of TLS sessions to be used for session resumption. | | [TLSSessionLifetime](#TLSSessionLifetime) | Specifies lifetime in seconds of the cached TLS session. | | [TLSSessionPurgeInterval](#TLSSessionPurgeInterval) | Specifies how often the session cache should remove the expired TLS sessions. | | [UseCRLObjectCaching](#UseCRLObjectCaching) | Specifies whether reuse of loaded CRL objects is enabled. | | [UseInternalRandom](#UseInternalRandom) | Switches between SecureBlackbox-own and platform PRNGs. | | [UseLegacyAdESValidation](#UseLegacyAdESValidation) | Enables legacy AdES validation mode. | | [UseOCSPResponseObjectCaching](#UseOCSPResponseObjectCaching) | Specifies whether reuse of loaded OCSP response objects is enabled. | | [UseOwnDNSResolver](#UseOwnDNSResolver) | Specifies whether the client components should use own DNS resolver. | | [UseSharedSystemStorages](#UseSharedSystemStorages) | Specifies whether the validation engine should use a global per-process copy of the system certificate stores. | | [UseSystemNativeSizeCalculation](#UseSystemNativeSizeCalculation) | An internal CryptoAPI access tweak. | | [UseSystemOAEPAndPSS](#UseSystemOAEPAndPSS) | Enforces or disables the use of system-driven RSA OAEP and PSS computations. | | [UseSystemRandom](#UseSystemRandom) | Enables or disables the use of the OS PRNG. | | [XMLRDNDescriptorName\[OID\]](#XMLRDNDescriptorName[OID]) | Defines an OID mapping to descriptor names for the certificate's IssuerRDN or SubjectRDN. | | [XMLRDNDescriptorPriority\[OID\]](#XMLRDNDescriptorPriority[OID]) | Specifies the priority of descriptor names associated with a specific OID. | | [XMLRDNDescriptorReverseOrder](#XMLRDNDescriptorReverseOrder) | Specifies whether to reverse the order of descriptors in RDN. | | [XMLRDNDescriptorSeparator](#XMLRDNDescriptorSeparator) | Specifies the separator used between descriptors in RDN. | # CanonicalizationMethod Property ([XMLSigner](#xmlsigner-component) Component) Specifies XML canonicalization method to use. ## Syntax *C++ Builder Syntax* ```text __property TsbxXMLSignerCanonicalizationMethods CanonicalizationMethod = { read=FCanonicalizationMethod, write=FSetCanonicalizationMethod }; enum TsbxXMLSignerCanonicalizationMethods { cxcmNone=0, cxcmCanon=1, cxcmCanonComment=2, cxcmExclCanon=3, cxcmExclCanonComment=4, cxcmMinCanon=5, cxcmCanon_v1_1=6, cxcmCanonComment_v1_1=7 }; ``` ## Default Value cxcmCanon ## Remarks Use this property to specify the method for XML canonicalization of SignedInfo element. See XML-Signature Syntax and Processing specification for details. Supported canonicalization methods: | | | | | --- | --- | --- | | cxcmNone | 0 | | | cxcmCanon | 1 | | | cxcmCanonComment | 2 | | | cxcmExclCanon | 3 | | | cxcmExclCanonComment | 4 | | | cxcmMinCanon | 5 | | | cxcmCanon_v1_1 | 6 | | | cxcmCanonComment_v1_1 | 7 | | ## Data Type Integer # DataBytes Property ([XMLSigner](#xmlsigner-component) Component) Use this property to pass the external data to component in the byte array form. ## Syntax *C++ Builder Syntax* ```text __property DynamicArray DataBytes = { read=FDataBytes, write=FSetDataBytes }; ``` ## Remarks Assign a byte array containing the external data to be processed to this property. This property is not available at design time. ## Data Type Byte Array # DataFile Property ([XMLSigner](#xmlsigner-component) Component) A file containing the external data covered by a detached signature. ## Syntax *C++ Builder Syntax* ```text __property String DataFile = { read=FDataFile, write=FSetDataFile }; ``` ## Default Value "" ## Remarks In the case of a detached signature, use this property to provide the external data to the component from a file. Alternatively, provide the data via DataStream. ## Data Type String # DataType Property ([XMLSigner](#xmlsigner-component) Component) Specifies the external data type. ## Syntax *C++ Builder Syntax* ```text __property TsbxXMLSignerDataTypes DataType = { read=FDataType, write=FSetDataType }; enum TsbxXMLSignerDataTypes { cxdtXML=0, cxdtBinary=1, cxdtBase64=2 }; ``` ## Default Value cxdtXML ## Remarks Use this property to specify the type of the external data (either [DataFile](#datafile-property-xmlsigner-component), DataStream or [DataBytes](#databytes-property-xmlsigner-component) properties) for component. ## Data Type Integer # DataURI Property ([XMLSigner](#xmlsigner-component) Component) Specifies a detached data resource URI. ## Syntax *C++ Builder Syntax* ```text __property String DataURI = { read=FDataURI, write=FSetDataURI }; ``` ## Default Value "" ## Remarks Specifies a URI used for data being signed, usually the data filename if stored along with a detached signature. ## Data Type String # Encoding Property ([XMLSigner](#xmlsigner-component) Component) Specifies XML encoding. ## Syntax *C++ Builder Syntax* ```text __property String Encoding = { read=FEncoding, write=FSetEncoding }; ``` ## Default Value "" ## Remarks Use this property to specify the encoding to apply to the XML documents. ## Data Type String # ExternalCryptoAsyncDocumentID Property ([XMLSigner](#xmlsigner-component) Component) Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls. ## Syntax *C++ Builder Syntax* ```text __property String ExternalCryptoAsyncDocumentID = { read=FExternalCryptoAsyncDocumentID, write=FSetExternalCryptoAsyncDocumentID }; ``` ## Default Value "" ## Remarks Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls. Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses. If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages. ## Data Type String # ExternalCryptoCustomParams Property ([XMLSigner](#xmlsigner-component) Component) Custom parameters to be passed to the signing service (uninterpreted). ## Syntax *C++ Builder Syntax* ```text __property String ExternalCryptoCustomParams = { read=FExternalCryptoCustomParams, write=FSetExternalCryptoCustomParams }; ``` ## Default Value "" ## Remarks Custom parameters to be passed to the signing service (uninterpreted). This property is not available at design time. ## Data Type String # ExternalCryptoData Property ([XMLSigner](#xmlsigner-component) Component) Additional data to be included in the async state and mirrored back by the requestor. ## Syntax *C++ Builder Syntax* ```text __property String ExternalCryptoData = { read=FExternalCryptoData, write=FSetExternalCryptoData }; ``` ## Default Value "" ## Remarks Additional data to be included in the async state and mirrored back by the requestor. This property is not available at design time. ## Data Type String # ExternalCryptoExternalHashCalculation Property ([XMLSigner](#xmlsigner-component) Component) Specifies whether the message hash is to be calculated at the external endpoint. ## Syntax *C++ Builder Syntax* ```text __property bool ExternalCryptoExternalHashCalculation = { read=FExternalCryptoExternalHashCalculation, write=FSetExternalCryptoExternalHashCalculation }; ``` ## Default Value false ## Remarks Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth component. If set to true, the component will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called. ## Data Type Boolean # ExternalCryptoHashAlgorithm Property ([XMLSigner](#xmlsigner-component) Component) Specifies the request's signature hash algorithm. ## Syntax *C++ Builder Syntax* ```text __property String ExternalCryptoHashAlgorithm = { read=FExternalCryptoHashAlgorithm, write=FSetExternalCryptoHashAlgorithm }; ``` ## Default Value "SHA256" ## Remarks Specifies the request's signature hash algorithm. | | | | | --- | --- | --- | | SB_HASH_ALGORITHM_SHA1 | SHA1 | | | SB_HASH_ALGORITHM_SHA224 | SHA224 | | | SB_HASH_ALGORITHM_SHA256 | SHA256 | | | SB_HASH_ALGORITHM_SHA384 | SHA384 | | | SB_HASH_ALGORITHM_SHA512 | SHA512 | | | SB_HASH_ALGORITHM_MD2 | MD2 | | | SB_HASH_ALGORITHM_MD4 | MD4 | | | SB_HASH_ALGORITHM_MD5 | MD5 | | | SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | | | SB_HASH_ALGORITHM_CRC32 | CRC32 | | | SB_HASH_ALGORITHM_SSL3 | SSL3 | | | SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | | | SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | | | SB_HASH_ALGORITHM_POLY1305 | POLY1305 | | | SB_HASH_ALGORITHM_SHA3_224 | SHA3_224 | | | SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | | | SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | | | SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 | | | SB_HASH_ALGORITHM_BLAKE2S_128 | BLAKE2S_128 | | | SB_HASH_ALGORITHM_BLAKE2S_160 | BLAKE2S_160 | | | SB_HASH_ALGORITHM_BLAKE2S_224 | BLAKE2S_224 | | | SB_HASH_ALGORITHM_BLAKE2S_256 | BLAKE2S_256 | | | SB_HASH_ALGORITHM_BLAKE2B_160 | BLAKE2B_160 | | | SB_HASH_ALGORITHM_BLAKE2B_256 | BLAKE2B_256 | | | SB_HASH_ALGORITHM_BLAKE2B_384 | BLAKE2B_384 | | | SB_HASH_ALGORITHM_BLAKE2B_512 | BLAKE2B_512 | | | SB_HASH_ALGORITHM_SHAKE_128 | SHAKE_128 | | | SB_HASH_ALGORITHM_SHAKE_256 | SHAKE_256 | | | SB_HASH_ALGORITHM_SHAKE_128_LEN | SHAKE_128_LEN | | | SB_HASH_ALGORITHM_SHAKE_256_LEN | SHAKE_256_LEN | | ## Data Type String # ExternalCryptoKeyID Property ([XMLSigner](#xmlsigner-component) Component) The ID of the pre-shared key used for DC request authentication. ## Syntax *C++ Builder Syntax* ```text __property String ExternalCryptoKeyID = { read=FExternalCryptoKeyID, write=FSetExternalCryptoKeyID }; ``` ## Default Value "" ## Remarks The ID of the pre-shared key used for DC request authentication. Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use [ExternalCryptoKeySecret](#externalcryptokeysecret-property-xmlsigner-component) to pass the key itself. The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted. Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users. Example: ```text signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789"; ``` ## Data Type String # ExternalCryptoKeySecret Property ([XMLSigner](#xmlsigner-component) Component) The pre-shared key used for DC request authentication. ## Syntax *C++ Builder Syntax* ```text __property String ExternalCryptoKeySecret = { read=FExternalCryptoKeySecret, write=FSetExternalCryptoKeySecret }; ``` ## Default Value "" ## Remarks The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work. Read more about configuring authentication in the [ExternalCryptoKeyID](#externalcryptokeyid-property-xmlsigner-component) topic. ## Data Type String # ExternalCryptoMethod Property ([XMLSigner](#xmlsigner-component) Component) Specifies the asynchronous signing method. ## Syntax *C++ Builder Syntax* ```text __property TsbxXMLSignerExternalCryptoMethods ExternalCryptoMethod = { read=FExternalCryptoMethod, write=FSetExternalCryptoMethod }; enum TsbxXMLSignerExternalCryptoMethods { asmdPKCS1=0, asmdPKCS7=1 }; ``` ## Default Value asmdPKCS1 ## Remarks Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup. Available options: | | | | --- | --- | | asmdPKCS1 | 0 | | asmdPKCS7 | 1 | ## Data Type Integer # ExternalCryptoMode Property ([XMLSigner](#xmlsigner-component) Component) Specifies the external cryptography mode. ## Syntax *C++ Builder Syntax* ```text __property TsbxXMLSignerExternalCryptoModes ExternalCryptoMode = { read=FExternalCryptoMode, write=FSetExternalCryptoMode }; enum TsbxXMLSignerExternalCryptoModes { ecmDefault=0, ecmDisabled=1, ecmGeneric=2, ecmDCAuth=3, ecmDCAuthJSON=4 }; ``` ## Default Value ecmDefault ## Remarks Specifies the external cryptography mode. Available options: | | | | --- | --- | | ecmDefault | The default value (0) | | ecmDisabled | Do not use DC or external signing (1) | | ecmGeneric | Generic external signing with the OnExternalSign event (2) | | ecmDCAuth | DCAuth signing (3) | | ecmDCAuthJSON | DCAuth signing in JSON format (4) | This property is not available at design time. ## Data Type Integer # ExternalCryptoPublicKeyAlgorithm Property ([XMLSigner](#xmlsigner-component) Component) Provide the public key algorithm here if the certificate is not available on the pre-signing stage. ## Syntax *C++ Builder Syntax* ```text __property String ExternalCryptoPublicKeyAlgorithm = { read=FExternalCryptoPublicKeyAlgorithm, write=FSetExternalCryptoPublicKeyAlgorithm }; ``` ## Default Value "" ## Remarks Provide the public key algorithm here if the certificate is not available on the pre-signing stage. | | | | | --- | --- | --- | | SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION | rsaEncryption | | | SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION | md2withRSAEncryption | | | SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION | md5withRSAEncryption | | | SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION | sha1withRSAEncryption | | | SB_CERT_ALGORITHM_ID_DSA | id-dsa | | | SB_CERT_ALGORITHM_ID_DSA_SHA1 | id-dsa-with-sha1 | | | SB_CERT_ALGORITHM_DH_PUBLIC | dhpublicnumber | | | SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION | sha224WithRSAEncryption | | | SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION | sha256WithRSAEncryption | | | SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION | sha384WithRSAEncryption | | | SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION | sha512WithRSAEncryption | | | SB_CERT_ALGORITHM_ID_RSAPSS | id-RSASSA-PSS | | | SB_CERT_ALGORITHM_ID_RSAOAEP | id-RSAES-OAEP | | | SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160 | ripemd160withRSA | | | SB_CERT_ALGORITHM_ID_ELGAMAL | elGamal | | | SB_CERT_ALGORITHM_SHA1_ECDSA | ecdsa-with-SHA1 | | | SB_CERT_ALGORITHM_RECOMMENDED_ECDSA | ecdsa-recommended | | | SB_CERT_ALGORITHM_SHA224_ECDSA | ecdsa-with-SHA224 | | | SB_CERT_ALGORITHM_SHA256_ECDSA | ecdsa-with-SHA256 | | | SB_CERT_ALGORITHM_SHA384_ECDSA | ecdsa-with-SHA384 | | | SB_CERT_ALGORITHM_SHA512_ECDSA | ecdsa-with-SHA512 | | | SB_CERT_ALGORITHM_EC | id-ecPublicKey | | | SB_CERT_ALGORITHM_SPECIFIED_ECDSA | ecdsa-specified | | | SB_CERT_ALGORITHM_GOST_R3410_1994 | id-GostR3410-94 | | | SB_CERT_ALGORITHM_GOST_R3410_2001 | id-GostR3410-2001 | | | SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994 | id-GostR3411-94-with-GostR3410-94 | | | SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001 | id-GostR3411-94-with-GostR3410-2001 | | | SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN | ecdsa-plain-SHA1 | | | SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN | ecdsa-plain-SHA224 | | | SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN | ecdsa-plain-SHA256 | | | SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN | ecdsa-plain-SHA384 | | | SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN | ecdsa-plain-SHA512 | | | SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN | ecdsa-plain-RIPEMD160 | | | SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION | whirlpoolWithRSAEncryption | | | SB_CERT_ALGORITHM_ID_DSA_SHA224 | id-dsa-with-sha224 | | | SB_CERT_ALGORITHM_ID_DSA_SHA256 | id-dsa-with-sha256 | | | SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-224 | | | SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-256 | | | SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-384 | | | SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-512 | | | SB_CERT_ALGORITHM_SHA3_224_ECDSA | id-ecdsa-with-sha3-224 | | | SB_CERT_ALGORITHM_SHA3_256_ECDSA | id-ecdsa-with-sha3-256 | | | SB_CERT_ALGORITHM_SHA3_384_ECDSA | id-ecdsa-with-sha3-384 | | | SB_CERT_ALGORITHM_SHA3_512_ECDSA | id-ecdsa-with-sha3-512 | | | SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-224 | | | SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-256 | | | SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-384 | | | SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-512 | | | SB_CERT_ALGORITHM_ID_DSA_SHA3_224 | id-dsa-with-sha3-224 | | | SB_CERT_ALGORITHM_ID_DSA_SHA3_256 | id-dsa-with-sha3-256 | | | SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s128 | | | SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s160 | | | SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s224 | | | SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s256 | | | SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b160 | | | SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b256 | | | SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b384 | | | SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b512 | | | SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA | id-ecdsa-with-blake2s128 | | | SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA | id-ecdsa-with-blake2s160 | | | SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA | id-ecdsa-with-blake2s224 | | | SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA | id-ecdsa-with-blake2s256 | | | SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA | id-ecdsa-with-blake2b160 | | | SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA | id-ecdsa-with-blake2b256 | | | SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA | id-ecdsa-with-blake2b384 | | | SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA | id-ecdsa-with-blake2b512 | | | SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s128 | | | SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s160 | | | SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s224 | | | SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s256 | | | SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b160 | | | SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b256 | | | SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b384 | | | SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b512 | | | SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224 | id-dsa-with-blake2s224 | | | SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256 | id-dsa-with-blake2s256 | | | SB_CERT_ALGORITHM_EDDSA_ED25519 | id-Ed25519 | | | SB_CERT_ALGORITHM_EDDSA_ED448 | id-Ed448 | | | SB_CERT_ALGORITHM_EDDSA_ED25519_PH | id-Ed25519ph | | | SB_CERT_ALGORITHM_EDDSA_ED448_PH | id-Ed448ph | | | SB_CERT_ALGORITHM_EDDSA | id-EdDSA | | | SB_CERT_ALGORITHM_EDDSA_SIGNATURE | id-EdDSA-sig | | | SB_CERT_ALGORITHM_MLDSA_44 | id-ml-dsa-44 | | | SB_CERT_ALGORITHM_MLDSA_65 | id-ml-dsa-65 | | | SB_CERT_ALGORITHM_MLDSA_87 | id-ml-dsa-87 | | | SB_CERT_ALGORITHM_HASH_MLDSA_44_SHA512 | id-hash-ml-dsa-44-with-sha512 | | | SB_CERT_ALGORITHM_HASH_MLDSA_65_SHA512 | id-hash-ml-dsa-65-with-sha512 | | | SB_CERT_ALGORITHM_HASH_MLDSA_87_SHA512 | id-hash-ml-dsa-87-with-sha512 | | | SB_CERT_ALGORITHM_MLKEM_512 | id-ml-kem-512 | | | SB_CERT_ALGORITHM_MLKEM_768 | id-ml-kem-768 | | | SB_CERT_ALGORITHM_MLKEM_1024 | id-ml-kem-1024 | | ## Data Type String # FIPSMode Property ([XMLSigner](#xmlsigner-component) Component) Reserved. ## Syntax *C++ Builder Syntax* ```text __property bool FIPSMode = { read=FFIPSMode, write=FSetFIPSMode }; ``` ## Default Value false ## Remarks This property is reserved for future use. ## Data Type Boolean # HashAlgorithm Property ([XMLSigner](#xmlsigner-component) Component) Specifies the hash algorithm to be used. ## Syntax *C++ Builder Syntax* ```text __property String HashAlgorithm = { read=FHashAlgorithm, write=FSetHashAlgorithm }; ``` ## Default Value "SHA256" ## Remarks Use this property to set the hash algorithm for signature calculation. Supported values: | | | | | --- | --- | --- | | SB_HASH_ALGORITHM_MD5 | MD5 | | | SB_HASH_ALGORITHM_SHA1 | SHA1 | | | SB_HASH_ALGORITHM_SHA224 | SHA224 | | | SB_HASH_ALGORITHM_SHA256 | SHA256 | | | SB_HASH_ALGORITHM_SHA384 | SHA384 | | | SB_HASH_ALGORITHM_SHA512 | SHA512 | | | SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | | | SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | | | SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | | | SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | | | SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | | | SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 | | ## Data Type String # InputBytes Property ([XMLSigner](#xmlsigner-component) Component) Use this property to pass the input to component in byte array form. ## Syntax *C++ Builder Syntax* ```text __property DynamicArray InputBytes = { read=FInputBytes, write=FSetInputBytes }; ``` ## Remarks Assign a byte array containing the data to be processed to this property. This property is not available at design time. ## Data Type Byte Array # InputFile Property ([XMLSigner](#xmlsigner-component) Component) Specifies the XML document to be signed. ## Syntax *C++ Builder Syntax* ```text __property String InputFile = { read=FInputFile, write=FSetInputFile }; ``` ## Default Value "" ## Remarks Provide a path to the XML file to be signed. ## Data Type String # OutputBytes Property ([XMLSigner](#xmlsigner-component) Component) Use this property to read the output the component object has produced. ## Syntax *C++ Builder Syntax* ```text __property DynamicArray OutputBytes = { read=FOutputBytes }; ``` ## Remarks Read the contents of this property after the operation has completed to read the produced output. This property will only be set if the [OutputFile](#outputfile-property-xmlsigner-component) and OutputStream properties had not been assigned. This property is read-only and not available at design time. ## Data Type Byte Array # OutputFile Property ([XMLSigner](#xmlsigner-component) Component) A file where the signed document is to be saved. ## Syntax *C++ Builder Syntax* ```text __property String OutputFile = { read=FOutputFile, write=FSetOutputFile }; ``` ## Default Value "" ## Remarks Provide a path to the file where the signed document is to be saved. ## Data Type String # ReferenceCount Property ([XMLSigner](#xmlsigner-component) Component) The number of records in the Reference arrays. ## Syntax *C++ Builder Syntax* ```text __property int ReferenceCount = { read=FReferenceCount, write=FSetReferenceCount }; ``` ## Default Value 0 ## Remarks This property controls the size of the following arrays: - [ReferenceAutoGenerateElementId](#referenceautogenerateelementid-property-xmlsigner-component) - [ReferenceCanonicalizationMethod](#referencecanonicalizationmethod-property-xmlsigner-component) - [ReferenceCustomElementId](#referencecustomelementid-property-xmlsigner-component) - [ReferenceDigestValue](#referencedigestvalue-property-xmlsigner-component) - [ReferenceHandle](#referencehandle-property-xmlsigner-component) - [ReferenceHashAlgorithm](#referencehashalgorithm-property-xmlsigner-component) - [ReferenceHasURI](#referencehasuri-property-xmlsigner-component) - [ReferenceID](#referenceid-property-xmlsigner-component) - [ReferenceInclusiveNamespacesPrefixList](#referenceinclusivenamespacesprefixlist-property-xmlsigner-component) - [ReferenceTargetData](#referencetargetdata-property-xmlsigner-component) - [ReferenceTargetType](#referencetargettype-property-xmlsigner-component) - [ReferenceTargetXMLElement](#referencetargetxmlelement-property-xmlsigner-component) - [ReferenceType](#referencetype-property-xmlsigner-component) - [ReferenceURI](#referenceuri-property-xmlsigner-component) - [ReferenceUseBase64Transform](#referenceusebase64transform-property-xmlsigner-component) - [ReferenceUseEnvelopedSignatureTransform](#referenceuseenvelopedsignaturetransform-property-xmlsigner-component) - [ReferenceUseXPathFilter2Transform](#referenceusexpathfilter2transform-property-xmlsigner-component) - [ReferenceUseXPathTransform](#referenceusexpathtransform-property-xmlsigner-component) - [ReferenceValidationResult](#referencevalidationresult-property-xmlsigner-component) - [ReferenceXPathExpression](#referencexpathexpression-property-xmlsigner-component) - [ReferenceXPathFilter2Expressions](#referencexpathfilter2expressions-property-xmlsigner-component) - [ReferenceXPathFilter2Filters](#referencexpathfilter2filters-property-xmlsigner-component) - [ReferenceXPathFilter2PrefixList](#referencexpathfilter2prefixlist-property-xmlsigner-component) - [ReferenceXPathPrefixList](#referencexpathprefixlist-property-xmlsigner-component) The array indices start at *0* and end at *ReferenceCount - 1*. This property is not available at design time. ## Data Type Integer # ReferenceAutoGenerateElementId Property ([XMLSigner](#xmlsigner-component) Component) Specifies whether the identifier (ID) attribute for a referenced (target) element should be auto-generated during signing. ## Syntax *C++ Builder Syntax* ```text __property bool ReferenceAutoGenerateElementId[int ReferenceIndex] = { read=FReferenceAutoGenerateElementId, write=FSetReferenceAutoGenerateElementId }; ``` ## Default Value false ## Remarks Specifies whether the identifier (ID) attribute for a referenced (target) element should be auto-generated during signing. Used when the referenced element doesn't have an ID and *CustomElementId* and *URI* properties are empty. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type Boolean # ReferenceCanonicalizationMethod Property ([XMLSigner](#xmlsigner-component) Component) Use this property to specify the canonicalization method for the transform of the reference. ## Syntax *C++ Builder Syntax* ```text __property TsbxXMLSignerReferenceCanonicalizationMethods ReferenceCanonicalizationMethod[int ReferenceIndex] = { read=FReferenceCanonicalizationMethod, write=FSetReferenceCanonicalizationMethod }; enum TsbxXMLSignerReferenceCanonicalizationMethods { cxcmNone=0, cxcmCanon=1, cxcmCanonComment=2, cxcmExclCanon=3, cxcmExclCanonComment=4, cxcmMinCanon=5, cxcmCanon_v1_1=6, cxcmCanonComment_v1_1=7 }; ``` ## Default Value cxcmNone ## Remarks Use this property to specify the canonicalization method for the transform of the reference. Use cxcmNone value to not to include canonicalization transform in transform chain. See XML-Signature Syntax and Processing specification for details. | | | | | --- | --- | --- | | cxcmNone | 0 | | | cxcmCanon | 1 | | | cxcmCanonComment | 2 | | | cxcmExclCanon | 3 | | | cxcmExclCanonComment | 4 | | | cxcmMinCanon | 5 | | | cxcmCanon_v1_1 | 6 | | | cxcmCanonComment_v1_1 | 7 | | The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type Integer # ReferenceCustomElementId Property ([XMLSigner](#xmlsigner-component) Component) Specifies a custom identifier (ID) attribute for a referenced (target) element that will be set on signing. ## Syntax *C++ Builder Syntax* ```text __property String ReferenceCustomElementId[int ReferenceIndex] = { read=FReferenceCustomElementId, write=FSetReferenceCustomElementId }; ``` ## Default Value "" ## Remarks Specifies a custom identifier (ID) attribute for a referenced (target) element that will be set on signing. Used when the referenced element doesn't have an ID and *URI* property is empty. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type String # ReferenceDigestValue Property ([XMLSigner](#xmlsigner-component) Component) Use this property to get or set the value of the digest calculated over the referenced data. ## Syntax *C++ Builder Syntax* ```text __property DynamicArray ReferenceDigestValue[int ReferenceIndex] = { read=FReferenceDigestValue, write=FSetReferenceDigestValue }; ``` ## Remarks Use this property to get or set the value of the digest calculated over the referenced data. This property is optional and should be set only if you don't provide the actual data via *TargetData* or *URI*. If the data is set, then you don't need to set *DigestValue* since it will be calculated automatically. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type Byte Array # ReferenceHandle Property ([XMLSigner](#xmlsigner-component) Component) Allows to get or set a 'handle', a unique identifier of the underlying property object. ## Syntax *C++ Builder Syntax* ```text __property __int64 ReferenceHandle[int ReferenceIndex] = { read=FReferenceHandle, write=FSetReferenceHandle }; ``` ## Default Value 0 ## Remarks Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise. When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. ```text pdfSigner.setSigningCertHandle(certMgr.getCertHandle()); ``` The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type Long64 # ReferenceHashAlgorithm Property ([XMLSigner](#xmlsigner-component) Component) Specifies the hash algorithm to be used. ## Syntax *C++ Builder Syntax* ```text __property String ReferenceHashAlgorithm[int ReferenceIndex] = { read=FReferenceHashAlgorithm, write=FSetReferenceHashAlgorithm }; ``` ## Default Value "SHA256" ## Remarks Specifies the hash algorithm to be used. Supported values: | | | | | --- | --- | --- | | SB_HASH_ALGORITHM_MD5 | MD5 | | | SB_HASH_ALGORITHM_SHA1 | SHA1 | | | SB_HASH_ALGORITHM_SHA224 | SHA224 | | | SB_HASH_ALGORITHM_SHA256 | SHA256 | | | SB_HASH_ALGORITHM_SHA384 | SHA384 | | | SB_HASH_ALGORITHM_SHA512 | SHA512 | | | SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | | | SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | | | SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | | | SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | | | SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | | | SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 | | The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type String # ReferenceHasURI Property ([XMLSigner](#xmlsigner-component) Component) Specifies whether the URI is set (even when it is empty). ## Syntax *C++ Builder Syntax* ```text __property bool ReferenceHasURI[int ReferenceIndex] = { read=FReferenceHasURI, write=FSetReferenceHasURI }; ``` ## Default Value true ## Remarks Specifies whether the *URI* is set (even when it is empty). The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type Boolean # ReferenceID Property ([XMLSigner](#xmlsigner-component) Component) A user-defined identifier (ID) attribute of this Reference element. ## Syntax *C++ Builder Syntax* ```text __property String ReferenceID[int ReferenceIndex] = { read=FReferenceID, write=FSetReferenceID }; ``` ## Default Value "" ## Remarks A user-defined identifier (ID) attribute of this Reference element. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type String # ReferenceInclusiveNamespacesPrefixList Property ([XMLSigner](#xmlsigner-component) Component) Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the reference. ## Syntax *C++ Builder Syntax* ```text __property String ReferenceInclusiveNamespacesPrefixList[int ReferenceIndex] = { read=FReferenceInclusiveNamespacesPrefixList, write=FSetReferenceInclusiveNamespacesPrefixList }; ``` ## Default Value "" ## Remarks Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the reference. See XML-Signature Syntax and Processing specification for details. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type String # ReferenceType Property ([XMLSigner](#xmlsigner-component) Component) The Reference's type attribute as defined in XMLDSIG specification. ## Syntax *C++ Builder Syntax* ```text __property String ReferenceType[int ReferenceIndex] = { read=FReferenceType, write=FSetReferenceType }; ``` ## Default Value "" ## Remarks The Reference's *type* attribute as defined in XMLDSIG specification. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type String # ReferenceTargetData Property ([XMLSigner](#xmlsigner-component) Component) Contains the referenced external data when the digest value is not explicitly specified. ## Syntax *C++ Builder Syntax* ```text __property DynamicArray ReferenceTargetData[int ReferenceIndex] = { read=FReferenceTargetData, write=FSetReferenceTargetData }; ``` ## Remarks Contains the referenced external data when the digest value is not explicitly specified. This property is optional and should only be set if you reference the external data via *URI*, and you don't provide the digest value explicitly via *DigestValue*. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type Byte Array # ReferenceTargetType Property ([XMLSigner](#xmlsigner-component) Component) The reference's target type to use. ## Syntax *C++ Builder Syntax* ```text __property TsbxXMLSignerReferenceTargetTypes ReferenceTargetType[int ReferenceIndex] = { read=FReferenceTargetType, write=FSetReferenceTargetType }; enum TsbxXMLSignerReferenceTargetTypes { rttAuto=0, rttXMLElement=1, rttData=2, rttURI=3 }; ``` ## Default Value rttAuto ## Remarks The reference's target type to use. Use this property to specify the reference's target type to use when forming the signature. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type Integer # ReferenceTargetXMLElement Property ([XMLSigner](#xmlsigner-component) Component) This property specifies the referenced XML element. ## Syntax *C++ Builder Syntax* ```text __property String ReferenceTargetXMLElement[int ReferenceIndex] = { read=FReferenceTargetXMLElement, write=FSetReferenceTargetXMLElement }; ``` ## Default Value "" ## Remarks This property specifies the referenced XML element. Used when the *URI* property is not set. In this case, the URI value is generated based on the ID of the referenced (target) XML element. If the *URI* property is set, this property is ignored until the *ResolveReference* event. Supported values are: | | | | --- | --- | | "" | an empty string indicates the Document element. | | "#id" | indicates an XML element with specified Id. | | XPointer expression | indicates an XML element selected using XPointer expression. Use the AddKnownNamespace method to specify Prefixes and NamespaceURIs For example: "/root/data[1]" - indicates the second "data" element under the document element with a name "root" "//ns1:data" - indicates a data element. "ns1" prefix should be defined via AddKnownNamespace method. | | Node name | indicates an XML element selected using its NodeName. For example: "data" - indicates an XML element with node name "data". | The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type String # ReferenceURI Property ([XMLSigner](#xmlsigner-component) Component) Use this property to get or set the URL which references the data. ## Syntax *C++ Builder Syntax* ```text __property String ReferenceURI[int ReferenceIndex] = { read=FReferenceURI, write=FSetReferenceURI }; ``` ## Default Value "" ## Remarks Use this property to get or set the URL which references the data. If the data is external, the application must set either *TargetData* or *DigestValue*. If *TargetData* is set, the digest is calculated automatically unless it is explicitly set by the application via *DigestValue*. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type String # ReferenceUseBase64Transform Property ([XMLSigner](#xmlsigner-component) Component) Specifies whether Base64 transform is included in transform chain. ## Syntax *C++ Builder Syntax* ```text __property bool ReferenceUseBase64Transform[int ReferenceIndex] = { read=FReferenceUseBase64Transform, write=FSetReferenceUseBase64Transform }; ``` ## Default Value false ## Remarks Specifies whether Base64 transform is included in transform chain. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type Boolean # ReferenceUseEnvelopedSignatureTransform Property ([XMLSigner](#xmlsigner-component) Component) Specifies whether enveloped signature transform is included in transform chain. ## Syntax *C++ Builder Syntax* ```text __property bool ReferenceUseEnvelopedSignatureTransform[int ReferenceIndex] = { read=FReferenceUseEnvelopedSignatureTransform, write=FSetReferenceUseEnvelopedSignatureTransform }; ``` ## Default Value false ## Remarks Specifies whether enveloped signature transform is included in transform chain. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type Boolean # ReferenceUseXPathFilter2Transform Property ([XMLSigner](#xmlsigner-component) Component) Specifies whether XPath Filter 2. ## Syntax *C++ Builder Syntax* ```text __property bool ReferenceUseXPathFilter2Transform[int ReferenceIndex] = { read=FReferenceUseXPathFilter2Transform, write=FSetReferenceUseXPathFilter2Transform }; ``` ## Default Value false ## Remarks Specifies whether XPath Filter 2.0 transform is included in transform chain. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type Boolean # ReferenceUseXPathTransform Property ([XMLSigner](#xmlsigner-component) Component) Specifies whether XPath transform is included in transform chain. ## Syntax *C++ Builder Syntax* ```text __property bool ReferenceUseXPathTransform[int ReferenceIndex] = { read=FReferenceUseXPathTransform, write=FSetReferenceUseXPathTransform }; ``` ## Default Value false ## Remarks Specifies whether XPath transform is included in transform chain. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type Boolean # ReferenceValidationResult Property ([XMLSigner](#xmlsigner-component) Component) The outcome of the cryptographic reference validation. ## Syntax *C++ Builder Syntax* ```text __property bool ReferenceValidationResult[int ReferenceIndex] = { read=FReferenceValidationResult }; ``` ## Default Value false ## Remarks The outcome of the cryptographic reference validation. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is read-only and not available at design time. ## Data Type Boolean # ReferenceXPathExpression Property ([XMLSigner](#xmlsigner-component) Component) Use this property to specify XPath expression for XPath transform of the reference. ## Syntax *C++ Builder Syntax* ```text __property String ReferenceXPathExpression[int ReferenceIndex] = { read=FReferenceXPathExpression, write=FSetReferenceXPathExpression }; ``` ## Default Value "" ## Remarks Use this property to specify XPath expression for XPath transform of the reference. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type String # ReferenceXPathFilter2Expressions Property ([XMLSigner](#xmlsigner-component) Component) Use this property to specify XPointer expression(s) for XPath Filter 2. ## Syntax *C++ Builder Syntax* ```text __property String ReferenceXPathFilter2Expressions[int ReferenceIndex] = { read=FReferenceXPathFilter2Expressions, write=FSetReferenceXPathFilter2Expressions }; ``` ## Default Value "" ## Remarks Use this property to specify XPointer expression(s) for XPath Filter 2.0 transform of the reference. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type String # ReferenceXPathFilter2Filters Property ([XMLSigner](#xmlsigner-component) Component) Use this property to specify XPointer filter(s) for XPath Filter 2. ## Syntax *C++ Builder Syntax* ```text __property String ReferenceXPathFilter2Filters[int ReferenceIndex] = { read=FReferenceXPathFilter2Filters, write=FSetReferenceXPathFilter2Filters }; ``` ## Default Value "" ## Remarks Use this property to specify XPointer filter(s) for XPath Filter 2.0 transform of the reference. The prefix list is comma-separated. Supported values: | | | | --- | --- | | "intersect" | Intersect filter computes the intersection of the selected subtrees with the filter node-set. | | "subtract" | Subtract filter computes the subtraction of the selected subtrees with the filter node-set. | | "union" | Union filter computes the union of the selected subtrees with the filter node-set. | The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type String # ReferenceXPathFilter2PrefixList Property ([XMLSigner](#xmlsigner-component) Component) Use this property to specify a prefix list for XPath Filter 2. ## Syntax *C++ Builder Syntax* ```text __property String ReferenceXPathFilter2PrefixList[int ReferenceIndex] = { read=FReferenceXPathFilter2PrefixList, write=FSetReferenceXPathFilter2PrefixList }; ``` ## Default Value "" ## Remarks Use this property to specify a prefix list for XPath Filter 2.0 transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from *XPathNamespaces* property. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type String # ReferenceXPathPrefixList Property ([XMLSigner](#xmlsigner-component) Component) Use this property to specify a prefix list for XPath transform of the reference. ## Syntax *C++ Builder Syntax* ```text __property String ReferenceXPathPrefixList[int ReferenceIndex] = { read=FReferenceXPathPrefixList, write=FSetReferenceXPathPrefixList }; ``` ## Default Value "" ## Remarks Use this property to specify a prefix list for XPath transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from *XPathNamespaces* property. The *ReferenceIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [ReferenceCount](#referencecount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type String # SignatureType Property ([XMLSigner](#xmlsigner-component) Component) The signature type to employ when signing the document. ## Syntax *C++ Builder Syntax* ```text __property TsbxXMLSignerSignatureTypes SignatureType = { read=FSignatureType, write=FSetSignatureType }; enum TsbxXMLSignerSignatureTypes { cxstDetached=1, cxstEnveloping=2, cxstEnveloped=4 }; ``` ## Default Value cxstEnveloped ## Remarks This property specifies the signature type to be used when signing the document. Supported values: | | | | | --- | --- | --- | | cxstDetached | 1 | Specifies whether a detached signature should be produced. I.e., a signature which is kept separately from the signed document. | | cxstEnveloping | 2 | Specifies whether an enveloping signature should be produced. | | cxstEnveloped | 4 | Specifies whether an enveloped signature should be produced. | ## Data Type Integer # SigningCertBytes Property ([XMLSigner](#xmlsigner-component) Component) Returns the raw certificate data in DER format. ## Syntax *C++ Builder Syntax* ```text __property DynamicArray SigningCertBytes = { read=FSigningCertBytes }; ``` ## Remarks Returns the raw certificate data in DER format. This property is read-only and not available at design time. ## Data Type Byte Array # SigningCertHandle Property ([XMLSigner](#xmlsigner-component) Component) Allows to get or set a 'handle', a unique identifier of the underlying property object. ## Syntax *C++ Builder Syntax* ```text __property __int64 SigningCertHandle = { read=FSigningCertHandle, write=FSetSigningCertHandle }; ``` ## Default Value 0 ## Remarks Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise. When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. ```text pdfSigner.setSigningCertHandle(certMgr.getCertHandle()); ``` This property is not available at design time. ## Data Type Long64 # SigningChainCount Property ([XMLSigner](#xmlsigner-component) Component) The number of records in the SigningChain arrays. ## Syntax *C++ Builder Syntax* ```text __property int SigningChainCount = { read=FSigningChainCount, write=FSetSigningChainCount }; ``` ## Default Value 0 ## Remarks This property controls the size of the following arrays: - [SigningChainBytes](#signingchainbytes-property-xmlsigner-component) - [SigningChainHandle](#signingchainhandle-property-xmlsigner-component) The array indices start at *0* and end at *SigningChainCount - 1*. This property is not available at design time. ## Data Type Integer # SigningChainBytes Property ([XMLSigner](#xmlsigner-component) Component) Returns the raw certificate data in DER format. ## Syntax *C++ Builder Syntax* ```text __property DynamicArray SigningChainBytes[int SigningChainIndex] = { read=FSigningChainBytes }; ``` ## Remarks Returns the raw certificate data in DER format. The *SigningChainIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [SigningChainCount](#signingchaincount-property-xmlsigner-component) property. This property is read-only and not available at design time. ## Data Type Byte Array # SigningChainHandle Property ([XMLSigner](#xmlsigner-component) Component) Allows to get or set a 'handle', a unique identifier of the underlying property object. ## Syntax *C++ Builder Syntax* ```text __property __int64 SigningChainHandle[int SigningChainIndex] = { read=FSigningChainHandle, write=FSetSigningChainHandle }; ``` ## Default Value 0 ## Remarks Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise. When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. ```text pdfSigner.setSigningCertHandle(certMgr.getCertHandle()); ``` The *SigningChainIndex* parameter specifies the index of the item in the array. The size of the array is controlled by the [SigningChainCount](#signingchaincount-property-xmlsigner-component) property. This property is not available at design time. ## Data Type Long64 # XMLElement Property ([XMLSigner](#xmlsigner-component) Component) Specifies the XML element where to save the signature data. ## Syntax *C++ Builder Syntax* ```text __property String XMLElement = { read=FXMLElement, write=FSetXMLElement }; ``` ## Default Value "" ## Remarks This property specifies the XML element where to save the electronic signature. Supported values are: | | | | --- | --- | | "" | an empty string indicates the Document element | | "#id" | indicates an XML element with specified Id | | XPath expression | indicates an XML element selected using XPath expression. Use [AddKnownNamespace](#addknownnamespace-method-xmlsigner-component) method to specify Prefixes and NamespaceURIs For example: "/root/data[1]" - indicates the second "data" element under the document element with a name "root" "//ns1:data" - indicates a data element. "ns1" prefix should be defined via [AddKnownNamespace](#addknownnamespace-method-xmlsigner-component) method. | | Node name | indicates an XML element selected using its NodeName. For example: "data" - indicates an XML element with node name "data". | ## Data Type String # AddDataReference Method ([XMLSigner](#xmlsigner-component) Component) Creates a new XML reference to the specified data. ## Syntax *C++ Builder Syntax* ```text int __fastcall AddDataReference(String DataURI, DynamicArray Data); ``` ## Remarks Use this method to add a reference to the custom data. Pass the reference's URI via *DataURI* parameter. This method uses [HashAlgorithm](#hashalgorithm-property-xmlsigner-component) property to specify the hash algorithm of the reference. The method returns the index of the new reference entry in the References collection. # AddKnownNamespace Method ([XMLSigner](#xmlsigner-component) Component) Adds known prefix and correspondent namespace URI. ## Syntax *C++ Builder Syntax* ```text void __fastcall AddKnownNamespace(String Prefix, String URI); ``` ## Remarks Use this method to add a known prefix and namespace URI that are used in XPath expression within XMLElement/XMLNode property, and within TargetXMLElement and XPathPrefixList properties of the references. # AddReference Method ([XMLSigner](#xmlsigner-component) Component) Creates a new XML reference to the specified XML element. ## Syntax *C++ Builder Syntax* ```text int __fastcall AddReference(String TargetXmlElement, String CustomId, bool AutoGenerateId); ``` ## Remarks Use this method to add a reference to a particular XML element. The reference's *URI* is set basing on the ID of the XML element. If the XML element doesn't have an ID then a *CustomId* value will be used. If *CustomId* is empty and *AutoGenerateId* is set, the ID will be generated automatically. An exception will be thrown otherwise. This method uses [CanonicalizationMethod](#canonicalizationmethod-property-xmlsigner-component) and [HashAlgorithm](#hashalgorithm-property-xmlsigner-component) properties to specify the canonicalization method and hash algorithm of the reference. The method returns the index of the new reference entry in the References collection. # Config Method ([XMLSigner](#xmlsigner-component) Component) Sets or retrieves a configuration setting. ## Syntax *C++ Builder Syntax* ```text String __fastcall Config(String ConfigurationString); ``` ## Remarks Config is a generic method available in every component. It is used to set and retrieve [configuration settings](#config-settings-xmlsigner-component) for the component. These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these *internal properties* is provided through the Config method. To set a configuration setting named *PROPERTY*, you must call *Config("PROPERTY=VALUE")*, where *VALUE* is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter). To read (query) the value of a [configuration setting](#config-settings-xmlsigner-component), you must call *Config("PROPERTY")*. The value will be returned as a string. # DoAction Method ([XMLSigner](#xmlsigner-component) Component) Performs an additional action. ## Syntax *C++ Builder Syntax* ```text String __fastcall DoAction(String ActionID, String ActionParams); ``` ## Remarks DoAction is a generic method available in every component. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time. The unique identifier (case insensitive) of the action is provided in the *ActionID* parameter. *ActionParams* contains the value of a single parameter, or a list of multiple parameters for the action in the form of *PARAM1=VALUE1;PARAM2=VALUE2;...*. Common ActionIDs: | | | | | | --- | --- | --- | --- | | Action | Parameters | Returned value | Description | | ResetTrustedListCache | none | none | Clears the cached list of trusted lists. | | ResetCertificateCache | none | none | Clears the cached certificates. | | ResetCRLCache | none | none | Clears the cached CRLs. | | ResetOCSPResponseCache | none | none | Clears the cached OCSP responses. | # ExtractAsyncData Method ([XMLSigner](#xmlsigner-component) Component) Extracts user data from the DC signing service response. ## Syntax *C++ Builder Syntax* ```text String __fastcall ExtractAsyncData(String AsyncReply); ``` ## Remarks Call this method before finalizing the asynchronous signing process to extract the data passed to the ExternalCrypto.Data property on the pre-signing stage. The Data parameter can be used to pass some state or document identifier along with the signing request from the pre-signing to the completion async stage. # GetInnerXML Method ([XMLSigner](#xmlsigner-component) Component) Get the inner XML content of the selected XML element. ## Syntax *C++ Builder Syntax* ```text String __fastcall GetInnerXML(String XPath); ``` ## Remarks Call this method to get the inner XML content of the selected XML element. # GetOuterXML Method ([XMLSigner](#xmlsigner-component) Component) Get the outer XML content of the selected XML element. ## Syntax *C++ Builder Syntax* ```text String __fastcall GetOuterXML(String XPath); ``` ## Remarks Call this method to get the outer XML content of the selected XML element. # GetTextContent Method ([XMLSigner](#xmlsigner-component) Component) Get the text content of the selected XML element. ## Syntax *C++ Builder Syntax* ```text String __fastcall GetTextContent(String XPath); ``` ## Remarks Call this method to get the text content of the selected XML element. # Reset Method ([XMLSigner](#xmlsigner-component) Component) Resets the component settings. ## Syntax *C++ Builder Syntax* ```text void __fastcall Reset(); ``` ## Remarks Reset is a generic method available in every component. # SetInnerXML Method ([XMLSigner](#xmlsigner-component) Component) Set the inner XML content of the selected XML element. ## Syntax *C++ Builder Syntax* ```text void __fastcall SetInnerXML(String XPath, String Value); ``` ## Remarks Call this method to set the inner XML content of the selected XML element. # SetTextContent Method ([XMLSigner](#xmlsigner-component) Component) Set the text content of the selected XML element. ## Syntax *C++ Builder Syntax* ```text void __fastcall SetTextContent(String XPath, String Value); ``` ## Remarks Call this method to set the text content of the selected XML element. # Sign Method ([XMLSigner](#xmlsigner-component) Component) Signs an XML document. ## Syntax *C++ Builder Syntax* ```text void __fastcall Sign(); ``` ## Remarks Call this method to generate a signature over an XML document. # SignAsyncBegin Method ([XMLSigner](#xmlsigner-component) Component) Initiates the asynchronous signing operation. ## Syntax *C++ Builder Syntax* ```text String __fastcall SignAsyncBegin(); ``` ## Remarks When using the DC framework, call this method to initiate the asynchronous signing process. Upon completion, a pre-signed copy of the document will be saved in [OutputFile](#outputfile-property-xmlsigner-component) (or OutputStream). Keep the pre-signed copy somewhere local, and pass the returned string ('the request state') to the DC processor for handling. Upon receiving the response state from the DC processor, assign the path to the pre-signed copy to [InputFile](#inputfile-property-xmlsigner-component) (or InputStream), and call [SignAsyncEnd](#signasyncend-method-xmlsigner-component) to finalize the signing. Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property. Use the *ExternalCrypto.AsyncDocumentID* property to supply a unique document ID to include in the request. This is helpful when creating batches of multiple async requests, as it allows you to pass the whole response batch to [SignAsyncEnd](#signasyncend-method-xmlsigner-component) and expect it to recover the correct response from the batch automatically. *AsyncState* is a message of the distributed cryptography (DC) protocol. The DC protocol is based on the exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes. In a typical scenario you get a client-side async state from the SignAsyncBegin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth component), which processes it and produces a matching signature state. The async state produced by the server is then passed to the [SignAsyncEnd](#signasyncend-method-xmlsigner-component) method. # SignAsyncEnd Method ([XMLSigner](#xmlsigner-component) Component) Completes the asynchronous signing operation. ## Syntax *C++ Builder Syntax* ```text void __fastcall SignAsyncEnd(String AsyncReply); ``` ## Remarks When using the DC framework, call this method upon receiving the response state from the DC processor to complete the asynchronous signing process. Before calling this method, assign the path to the pre-signed copy of the document obtained from the prior [SignAsyncBegin](#signasyncbegin-method-xmlsigner-component) call to [InputFile](#inputfile-property-xmlsigner-component) (or InputStream). The method will embed the signature into the pre-signed document, and save the complete signed document to [OutputFile](#outputfile-property-xmlsigner-component) (or OutputStream). Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property. Use the *ExternalCrypto.AsyncDocumentID* parameter to pass a specific document ID if using batched AsyncReply. If used, it should match the value provided on the pre-signing ([SignAsyncBegin](#signasyncbegin-method-xmlsigner-component)) stage. *AsyncState* is a message of the distributed cryptography (DC) protocol. The DC protocol is based on the exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes. In a typical scenario you get a client-side async state from the [SignAsyncBegin](#signasyncbegin-method-xmlsigner-component) method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth component), which processes it and produces a matching signature state. The async state produced by the server is then passed to the SignAsyncEnd method. # SignExternal Method ([XMLSigner](#xmlsigner-component) Component) Signs the document using an external signing facility. ## Syntax *C++ Builder Syntax* ```text void __fastcall SignExternal(); ``` ## Remarks Call this method to delegate the low-level signing operation to an external, remote, or custom signing engine. This method is useful if the signature has to be made by a device accessible through a custom or non-standard signing interface. When all preparations are done and hash is computed, the component fires [ExternalSign](#externalsign-event-xmlsigner-component) event which allows to pass the hash value for signing. # Error Event ([XMLSigner](#xmlsigner-component) Component) Reports the details of signing errors. ## Syntax *C++ Builder Syntax* ```text typedef struct { int ErrorCode; String Description; } TsbxXMLSignerErrorEventParams; typedef void __fastcall (__closure *TsbxXMLSignerErrorEvent)(System::TObject* Sender, TsbxXMLSignerErrorEventParams *e); __property TsbxXMLSignerErrorEvent OnError = { read=FOnError, write=FOnError }; ``` ## Remarks The event is fired in case of exceptional conditions during signing. *ErrorCode* contains an error code and *Description* contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to [XML](#trappable-errors-xmlsigner-component). # ExternalSign Event ([XMLSigner](#xmlsigner-component) Component) Handles remote or external signing initiated by the SignExternal method or other source. ## Syntax *C++ Builder Syntax* ```text typedef struct { String OperationId; String HashAlgorithm; String Pars; String Data; String SignedData; } TsbxXMLSignerExternalSignEventParams; typedef void __fastcall (__closure *TsbxXMLSignerExternalSignEvent)(System::TObject* Sender, TsbxXMLSignerExternalSignEventParams *e); __property TsbxXMLSignerExternalSignEvent OnExternalSign = { read=FOnExternalSign, write=FOnExternalSign }; ``` ## Remarks Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed. The event handler must pass the value of *Data* to the signer, obtain the signature, and pass it back to the component via the *SignedData* parameter. *OperationId* provides a comment about the operation and its origin. It depends on the exact component being used, and may be empty. *HashAlgorithm* specifies the hash algorithm being used for the operation, and *Pars* contains algorithm-dependent parameters. The component uses base16 (hex) encoding for the *Data*, *SignedData*, and *Pars* parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing. A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16 A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following: ```text signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); }; ``` # FormatElement Event ([XMLSigner](#xmlsigner-component) Component) Reports the XML element that is currently being processed. ## Syntax *C++ Builder Syntax* ```text typedef struct { String StartTagWhitespace; String EndTagWhitespace; int Level; String Path; bool HasChildElements; } TsbxXMLSignerFormatElementEventParams; typedef void __fastcall (__closure *TsbxXMLSignerFormatElementEvent)(System::TObject* Sender, TsbxXMLSignerFormatElementEventParams *e); __property TsbxXMLSignerFormatElementEvent OnFormatElement = { read=FOnFormatElement, write=FOnFormatElement }; ``` ## Remarks *Path* and *Level* specify the path to the XML element being processed and its nesting level, respectively. *HasChildElements* specify if processed XML element has child elements. Among other purposes, this event may be used to add whitespace formatting before or after a particular element in the signature. # FormatText Event ([XMLSigner](#xmlsigner-component) Component) Reports XML text that is currently being processed. ## Syntax *C++ Builder Syntax* ```text typedef struct { String Text; int TextType; int Level; String Path; } TsbxXMLSignerFormatTextEventParams; typedef void __fastcall (__closure *TsbxXMLSignerFormatTextEvent)(System::TObject* Sender, TsbxXMLSignerFormatTextEventParams *e); __property TsbxXMLSignerFormatTextEvent OnFormatText = { read=FOnFormatText, write=FOnFormatText }; ``` ## Remarks *TextType* parameter specifies the type of the XML text (normal or Base64-encoded) that is stored in the element; *Path* and *Level* specify the path to the XML element and its nesting level. Among other purposes, this event may be used to add whitespace formatting before or after a particular element in the signature. # Notification Event ([XMLSigner](#xmlsigner-component) Component) This event notifies the application about an underlying control flow event. ## Syntax *C++ Builder Syntax* ```text typedef struct { String EventID; String EventParam; } TsbxXMLSignerNotificationEventParams; typedef void __fastcall (__closure *TsbxXMLSignerNotificationEvent)(System::TObject* Sender, TsbxXMLSignerNotificationEventParams *e); __property TsbxXMLSignerNotificationEvent OnNotification = { read=FOnNotification, write=FOnNotification }; ``` ## Remarks The component fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time. The unique identifier of the event is provided in the *EventID* parameter. *EventParam* contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted. This component can fire this event with the following *EventID* values: | | | | --- | --- | | DocumentLoaded | Notifies the application that the document has been loaded. This is a backward-compatibility-only notification. Use OnDocumentLoaded event instead. | | SignaturesLoaded | Notifies the application that the component has finished loading signatures. | | RetrieveQualifyingProperties | TBD | | BeforeTimestamp | This event is fired before a timestamp is requested from the timestamping authority. Use the event handler to modify TSA and HTTP settings. | | TimestampError | This event is only fired if the component failed to obtain a timestamp from the timestamping authority. The EventParam parameter contains extended error info. | | TimestampRequest | A timestamp is requested from the custom timestamping authority. This event is only fired if TimestampServer was set to a virtual:// URI. The EventParam parameter contains the TSP request (or the plain hash, depending on the value provided to TimestampServer), in base16, that needs to be sent to the TSA. Use the event handler to send the request to the TSA. Upon receiving the response, assign it, in base16, to the TimestampResponse configuration property. | # ResolveReference Event ([XMLSigner](#xmlsigner-component) Component) Asks the application to resolve a reference. ## Syntax *C++ Builder Syntax* ```text typedef struct { int ReferenceIndex; String URI; } TsbxXMLSignerResolveReferenceEventParams; typedef void __fastcall (__closure *TsbxXMLSignerResolveReferenceEvent)(System::TObject* Sender, TsbxXMLSignerResolveReferenceEventParams *e); __property TsbxXMLSignerResolveReferenceEvent OnResolveReference = { read=FOnResolveReference, write=FOnResolveReference }; ``` ## Remarks This event is fired when the control could not automatically resolve a reference and requires custom treatment. *URI* contains a reference to the data. *ReferenceIndex* specifies the index of the reference to process. Based on the reference's URI the event handler should set either TargetXMLElement or TargetData property of the reference. # Config Settings ([XMLSigner](#xmlsigner-component) Component) The component accepts one or more of the following *configuration settings*. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these *internal properties* is provided through the [Config](#config-method-xmlsigner-component) method. ### XMLSigner Config Settings **AddAllDataObjectsTimestamp**: Whether to add all data objects timestamp during signing.If this property is set to True, the all data objects timestamp (xades:AllDataObjectsTimeStamp element) will be added. **AsyncDocumentID**: Specifies the document ID for SignAsyncEnd() call.Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. This value helps ASiCSigner identify the correct signature in the returned batch of responses. If using batched requests, make sure to set this property to the same value on both pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages. **CachedCRLMaxAge**: Specifies the maximum age of a cached CRL.Use this setting to specify the maximum number of seconds that may pass since a CRL was added to the global cache. When the cached CRL is older than this value, it is disregarded and a new CRL should be fetched. The default value is 1 day (86400 seconds). A value of 0 disables the absolute CRL age check. See [RevocationCacheAgePolicy](#RevocationCacheAgePolicy) for configuring this setting together with the related cached revocation freshness settings. **CachedCRLMaxAgeRatio**: Specifies the maximum age of a cached CRL as a percentage of its remaining lifetime.Use this setting to specify the percentage of the CRL's remaining lifetime, measured from the time the CRL was added to the global cache to the CRL's NextUpdate. When this portion of the remaining lifetime has passed, the cached CRL is disregarded and a new CRL should be fetched. The default value is 50 percent. Values are interpreted in the 0..100 range. A value of 0 disables the CRL ratio check. See [RevocationCacheAgePolicy](#RevocationCacheAgePolicy) for configuring this setting together with the related cached revocation freshness settings. **CachedCRLOverlapTime**: Specifies the time period before a cached CRL's NextUpdate when it is considered stale and must be refreshed.Use this setting to specify the number of seconds before the NextUpdate time at which the cached CRL should be disregarded, and a new CRL should be fetched. The default value is 10 minutes (600 seconds). A value of 0 disables the CRL overlap check. See [RevocationCacheAgePolicy](#RevocationCacheAgePolicy) for configuring this setting together with the related cached revocation freshness settings. This setting is evaluated independently from [CachedCRLMaxAge](#CachedCRLMaxAge) and [CachedCRLMaxAgeRatio](#CachedCRLMaxAgeRatio). If several cached CRL freshness settings are enabled, the cached CRL is used only if it satisfies all of them. **CachedOCSPResponseMaxAge**: Specifies the maximum age of a cached OCSP response.Use this setting to specify the maximum number of seconds that may pass since an OCSP response was added to the global cache. When the cached OCSP response is older than this value, it is disregarded and a new OCSP response should be fetched. The default value is 1 hour (3600 seconds). A value of 0 disables the absolute OCSP response age check. This setting is also used to limit open-ended OCSP responses that do not have NextUpdate. See [RevocationCacheAgePolicy](#RevocationCacheAgePolicy) for configuring this setting together with the related cached revocation freshness settings. **CachedOCSPResponseMaxAgeRatio**: Specifies the maximum age of a cached OCSP response as a percentage of its remaining lifetime.Use this setting to specify the percentage of the OCSP response's remaining lifetime, measured from the time the OCSP response was added to the global cache to the response's NextUpdate. When this portion of the remaining lifetime has passed, the cached OCSP response is disregarded and a new OCSP response should be fetched. The default value is 50 percent. Values are interpreted in the 0..100 range. Open-ended OCSP responses without NextUpdate ignore this setting; use [CachedOCSPResponseMaxAge](#CachedOCSPResponseMaxAge) to limit their age. A value of 0 disables the OCSP response ratio check. See [RevocationCacheAgePolicy](#RevocationCacheAgePolicy) for configuring this setting together with the related cached revocation freshness settings. **CachedOCSPResponseOverlapTime**: Specifies the time period before a cached OCSP response's NextUpdate when it is considered stale and must be refreshed.Use this setting to specify the number of seconds before the NextUpdate time at which the cached OCSP response should be disregarded, and a new OCSP response should be fetched. The default value is 10 minutes (600 seconds). A value of 0 disables the OCSP response overlap check. See [RevocationCacheAgePolicy](#RevocationCacheAgePolicy) for configuring this setting together with the related cached revocation freshness settings. This setting is evaluated independently from [CachedOCSPResponseMaxAge](#CachedOCSPResponseMaxAge) and [CachedOCSPResponseMaxAgeRatio](#CachedOCSPResponseMaxAgeRatio). If several cached OCSP response freshness settings are enabled, the cached OCSP response is used only if it satisfies all of them. **ChainCurrentCACert**: Returns the current CA certificate.This property returns the CA certificate that is used on the current step. **ChainCurrentCert**: Returns the certificate that is currently being validated.Use this property to obtain the body of the certificate that is currently being validated. **ChainCurrentCRL**: Returns the current CRL.Returns the CRL object that is currently being processed. **ChainCurrentCRLSize**: Returns the size of the current CRL.This property returns the size of the CRL object that is currently being processed. **ChainCurrentOCSP**: Returns the current OCSP response.Returns the OCSP object that is currently being processed. **ChainCurrentOCSPSigner**: Returns the signer of the current OCSP object.Returns the signer/CA that has issued the OCSP response that is currently being processed. **ChainInterimDetails**: Returns the current interim validation details.This property returns the interim chain validation details. **ChainInterimResult**: Returns the current interim validation result.Use this setting to obtain the current (mid-chain) validation result. This property applies to the current validation step and may change as the chain walk proceeds. The final result will be published in the ChainValidationResult property once the validation process completes. **CheckValidityPeriodForTrusted**: Whether to check validity period for trusted certificates.Whether to check validity period for trusted certificates. **ClaimedRolesXML**: The XML content of the claimed roles.Use this property to get/specify the XML content of the claimed roles element. **ClaimedRoleText**: The text of the claimed role.Use this property to get/specify the text of the first claimed role. **CommitmentTypeIndicationAllSignedDataObjects[Index]**: Specifies the CommitmentTypeIndication's AllSignedDataObjects.This property contains if the CommitmentTypeIndication's AllSignedDataObjects element is present that indicates that all the signed data objects share the same commitment. Index value could be omitted for the first CommitmentTypeIndication element. **CommitmentTypeIndicationCount**: The number of the CommitmentTypeIndication elements.Returns the number of the xades:CommitmentTypeIndication elements available. **CommitmentTypeIndicationIdentifier[Index]**: Specifies the CommitmentTypeIndication's CommitmentTypeId's Identifier.This property contains an identifier indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's Identifier element. Index value could be omitted for the first CommitmentTypeIndication element. **CommitmentTypeIndicationIdentifierDescription[Index]**: Specifies the CommitmentTypeIndication's CommitmentTypeId's Description.This property contains an identifier's description indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's Description element. Index value could be omitted for the first CommitmentTypeIndication element. **CommitmentTypeIndicationIdentifierDocumentationReferences[Index]**: Specifies the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences.This property contains an identifier's documentation references indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences element. Index value could be omitted for the first CommitmentTypeIndication element. **CommitmentTypeIndicationIdentifierQualifier[Index]**: Specifies the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier.This property contains an identifier qualifier indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier element. Index value could be omitted for the first CommitmentTypeIndication element. **CommitmentTypeIndicationObjectReference[Index]**: Specifies the CommitmentTypeIndication's ObjectReference.This property contains the CommitmentTypeIndication's ObjectReference elements that refer to one or several ds:Reference elements of the ds:SignedInfo corresponding with one data object qualified by this property. Index value could be omitted for the first CommitmentTypeIndication element. **CommitmentTypeIndicationQualifiersXML[Index]**: The XML content of the CommitmentTypeIndication's Qualifiers.This property contains the CommitmentTypeIndication's Qualifiers elements XML content. Index value could be omitted for the first CommitmentTypeIndication element. **CustomTrustedLists**: Specifies the custom TrustedLists.Use this property to specify the custom TSLs (Trust Service status Lists) to the validator. The URLs list is comma-separated. **CustomTSLs**: Specifies the custom TrustedLists.Use this property to specify the custom TSLs (Trust Service status Lists) to the validator. The URLs list is comma-separated. **DataObjectFormatCount**: The number of the DataObjectFormat elements.Returns the number of the xades:DataObjectFormat elements available. **DataObjectFormatDescription[Index]**: Specifies the DataObjectFormat's Description.This property contains textual information related to the signed data object in the DataObjectFormat's Description element. Index value could be omitted for the first DataObjectFormat element. **DataObjectFormatEncoding[Index]**: Specifies the DataObjectFormat's Encoding.This property contains an indication of the encoding format of the signed data object in the DataObjectFormat's Encoding element. Index value could be omitted for the first DataObjectFormat element. **DataObjectFormatMimeType[Index]**: Specifies the DataObjectFormat's MimeType.This property contains an indication of the MIME type of the signed data object in the DataObjectFormat's MimeType element. Index value could be omitted for the first DataObjectFormat element. **DataObjectFormatObjectIdentifier[Index]**: Specifies the DataObjectFormat's ObjectIdentifier's Identifier.This property contains an identifier indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's Identifier element. Index value could be omitted for the first DataObjectFormat element. **DataObjectFormatObjectIdentifierDescription[Index]**: Specifies the DataObjectFormat's ObjectIdentifier's Description.This property contains an identifier's description indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's Description element. Index value could be omitted for the first DataObjectFormat element. **DataObjectFormatObjectIdentifierDocumentationReferences[Index]**: Specifies the DataObjectFormat's ObjectIdentifier's DocumentationReferences.This property contains an identifier's documentation references indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's DocumentationReferences element. Index value could be omitted for the first DataObjectFormat element. **DataObjectFormatObjectIdentifierQualifier[Index]**: Specifies the DataObjectFormat's ObjectIdentifier's IdentifierQualifier.This property contains an identifier qualifier indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's IdentifierQualifier element. Index value could be omitted for the first DataObjectFormat element. **DataObjectFormatObjectReference[Index]**: Specifies the DataObjectFormat's ObjectReference.This property contains the DataObjectFormat's ObjectReference element that reference the ds:Reference element of the ds:Signature corresponding with the data object qualified by this property. For example, if the corresponding ds:Reference element has an Id "reference-id-1", then you should set this property to "#reference-id-1" value. Index value could be omitted for the first DataObjectFormat element. **DataType**: Specifies the external data type.Use this property to specify the type of the external data (either [DataFile](#datafile-property-xmlsigner-component), DataStream or [DataBytes](#databytes-property-xmlsigner-component) properties) for component. The following data types are supported: | | | | | --- | --- | --- | | "" or "XML" | | an XML document (by default). | | "data" | | a binary data. | **DeltaCRLPreference**: Specifies whether complete or delta CRLs are preferred.Use this setting to specify which CRL type should be preferred during revocation checks performed by the AdES component. The default value is **dcrlpPreferComplete** (1). Supported values: - **dcrlpPreferDelta** (0): retrieve and use delta CRLs when available, falling back to complete CRLs when needed. - **dcrlpPreferComplete** (1): try complete CRLs first, and use delta CRLs only if complete CRLs cannot be retrieved. **DetachedResourceURI**: Specifies a detached resource URI.Specifies a URI used for data being signed, usually the data filename if stored along with a detached signature. **DislikeOpenEndedOCSPs**: Tells the component to discourage OCSP responses without an explicit NextUpdate parameter.When this property is set to True, the validation engine treats OCSP response without a NextUpdate field as 'substandard' and tries to obtain some further revocation material for the certificate in question (a different OCSP or a CRL, even if the component is configured to prefer the OCSP route). This is to work around Adobe Reader's intolerance to such OCSPs when classifying signed documents as LTV (as of August 2022). **EnvelopingObjectEncoding**: Specifies the enveloping object encoding.In case of enveloping signature, this property contains the Encoding attribute of the enveloped object. **EnvelopingObjectID**: Specifies the enveloping object identifier.In case of enveloping signature, this property contains the identifier (ID) attribute of the enveloped object. **EnvelopingObjectMimeType**: Specifies the enveloping object MIME type.In case of enveloping signature, this property contains the MIME type attribute of the enveloped object. **EvaluateSystemTrust**: Enables or disables usage of the platform's built-in trust validation facilities.When enabled, the component delegates the certificate chain validation to the operating system's native trust evaluation mechanism (e.g. SecTrustEvaluate on Apple platforms). This functionality is currently available on macOS and iOS systems only. This property is disabled by default, because enabling it may prevent the AdES components from collecting full revocation information required for long-term validation (LTV) signatures. **EvaluateSystemTrustForSelfSignedCertificates**: Enables or disables usage of the platform's built-in trust validation facilities for self-signed certificates.When enabled, the component delegates the certificate chain validation to the operating system's native trust evaluation mechanism (e.g. SecTrustEvaluate on Apple platforms) for self-signed certificates. This functionality is currently available on macOS and iOS systems only. This property is enabled by default. **EvaluateSystemTrustForSSL**: Enables or disables usage of the platform's built-in trust validation facilities for SSL/TLS.When enabled, the component delegates the certificate chain validation to the operating system's native trust evaluation mechanism (e.g. SecTrustEvaluate on Apple platforms) specifically for SSL/TLS certificates. This functionality is currently available on macOS and iOS systems only. This property is enabled by default. **ExclusiveCanonicalizationPrefix**: Specifies the exclusive canonicalization prefix.Specifies the prefix for the ec:InclusiveNamespaces element for the exclusive canonicalization. Default value is "ec". In this case "ec:" prefix will be used. Special values: | | | | --- | --- | | "#default" or "" | indicates that the prefix will be omitted. | | "#auto" | indicates that the prefix will be auto-detected based on the parent nodes. | **ForceCompleteChainValidation**: Whether to check the CA certificates when the signing certificate is invalid.Set this property to True to check issuer (CA) certificates if the signing or an intermediate chain certificate is invalid. **ForceCompleteChainValidationForTrusted**: Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors. Set this property to True to enable full chain validation for explicitly trusted intermediary or end-entity certificates. This may be useful when creating signatures to enforce completeness of the collected revocation information. It often makes sense to set this property to false when validating signatures to reduce validation time and avoid issues with badly configured environments. **GracePeriod**: Specifies a grace period to apply during revocation information checks.Use this property to specify a grace period (in seconds). Grace period applies to certain subprotocols, such as OCSP, and caters to the inaccuracy and/or missynchronization of clocks on different participating systems. Any time deviations within the grace period will be tolerated. **HMACKey**: The key value for HMAC.Use this property to set the HMAC key. The component uses base16 (hex) encoding for this configuration value. **HMACOutputLength**: Sets the length of the HMAC output.Use this property to configure the length of the HMAC output, in bytes. **HMACSigningUsed**: Whether to use HMAC signing.Set this property to true to make the component perform signing using HMAC method, rather than asymmetric cryptography. TBD **IDAttributeName**: Specifies the custom name of ID attribute.This property contains the custom name of identifier (ID) attribute. Used to identify the target XML element when reference URI has "#id_name" value or when ID attribute should be auto-generated for a target XML element. **IDAttributeNamespaceURI**: Specifies the custom namespace URI of ID attribute.This property contains the custom namespace URI of identifier (ID) attribute. Used to identify the target XML element when reference URI has "#id_name" value or when ID attribute should be auto-generated for a target XML element. **IgnoreChainLoops**: Whether chain loops should be ignored.Set this property to True to make the validation engine ignore chain loops. This may be an option when you need to process chains from buggy CAs that happen to include subchains that sign themselves. **IgnoreChainValidationErrors**: Whether to ignore any certificate chain validation issues.Enable this property to ignore any chain validation errors when creating a signature. This may be useful if the signature is created in an environment which uses different trust settings to the validation environment. **IgnoreOCSPNoCheckExtension**: Whether the OCSP NoCheck extension should be ignored.Set this property to True to make the validation engine ignore the OCSP no-check extension. You would normally need to set this property when validating severely non-compliant chains that misuse the extension, causing chain loops or other validation issues. **IgnoreSystemTrust**: Whether trusted Windows Certificate Stores should be treated as trusted.Specifies whether, during chain validation, the component should respect the trust to CA certificates as configured in the operating system. In Windows this effectively defines whether the component should trust the certificates residing in the Trusted Root Certification Authorities store. If [IgnoreSystemTrust](#IgnoreSystemTrust) is True, certificates residing in the trusted root store are treated as if they are known, rather than trusted. Only certificates provided via other means (such as the TrustedCertificates property) are considered trusted. **IgnoreTimestampFailure**: Whether to ignore time-stamping failure during signing.If this property is set to True, any failure during time-stamping process will be ignored. **ImplicitlyTrustSelfSignedCertificates**: Whether to trust self-signed certificates. Set this property to True to implicitly trust all self-signed certificates. Use it with care as trusting just about every self-signed certificate is unwise. One exceptional reason where this property may be handy is where a chain is validated in an environment that is not supposed to trust it (for example, a signing, rather than verifying environment, or a QA server). Trusting all self-signing certificates (which are normally trusted) allows emulating the verifying environment without actually changing its security settings. **IncludeKey**: Specifies whether to include the signing key to the signature.Set this property to True to include the public part of the signing key to the signature. **IncludeKeyValue**: Specifies whether the key value must be included to the signature.Set this property to True if the key value (its public part) should be included to the signature. **IncludeKnownRevocationInfoToSignature**: Whether to include custom revocation info to the signature.This property specifies whether revocation pieces provided via KnownCertificates, KnownCRLs, and KnownOCSPs properties should be included into the signature. This property lets you include custom validation elements to the signature in addition to the ones comprising the signing chain. **InclusiveNamespacesPrefixList**: Specifies the InclusiveNamespaces PrefixList.Use this property to read/specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of SignedInfo element. See XML-Signature Syntax and Processing specification for details. **InputType**: Specifies the Input type.Use this property to specify the type of the input (either [InputFile](#inputfile-property-xmlsigner-component), InputStream or [InputBytes](#inputbytes-property-xmlsigner-component) properties) for component for [Sign](#sign-method-xmlsigner-component) method. The following input types are supported: | | | | | --- | --- | --- | | "" or "XML" | | an XML document (by default). | | "data" | | a binary data. | | "base64" | | Base64 encoded binary data (input data will be encoded in Base64 and will be placed in ds:Object for Enveloping signature type) | What input types could be used depends on [SignatureType](#signaturetype-property-xmlsigner-component): | | | | --- | --- | | | Enveloped signature type supports only an XML document as the input. | | | Enveloping signature type supports all types of the input. | | | Detached signature type supports an XML document and a binary data as the input. | **InsertBeforeXMLElement**: Defines the reference XML element for signature insertion.Use this property to specify XML element before which the signature should be inserted, but it must be under the element specified by the [NewSigXMLElement](#XMLSigner_p_NewSigXMLElement) property. Supported values are: | | | | --- | --- | | "" | an empty string indicates the Document element | | "#id" | indicates an XML element with specified Id | | XPath expression | indicates an XML element selected using XPath expression. Use [AddKnownNamespace](#addknownnamespace-method-xmlsigner-component) method to specify Prefixes and NamespaceURIs For example: "/root/data[1]" - indicates the second "data" element under the document element with a name "root" "//ns1:data" - indicates a data element. "ns1" prefix should be defined via [AddKnownNamespace](#addknownnamespace-method-xmlsigner-component) method. | | Node name | indicates an XML element selected using its NodeName. For example: "data" - indicates an XML element with node name "data". | **KeyInfoCustomXML**: The custom XML content for KeyInfo element.Use this property to specify the custom XML content of the ds:KeyInfo element. The empty elements in the custom XML content act as a placeholder for auto-generated elements. For example to change the order of ds:KeyValue and ds:X509Data auto-generated elements use the value: "" **KeyInfoDetails**: Specifies the signing key info details to include to the signature.Contains a comma-separated list of values that specifies which signing key info details to include to the signature. Supported values are: | | | | | --- | --- | --- | | certificate | | Base64-encoded [X509v3] certificate is placed to the signature | | issuerserial | | X.509 issuer distinguished name/serial number pair are placed to the signature | | subjectname | | X.509 subject distinguished name is placed to the signature | | ski | | Base64 encoded plain (i.e. non-DER-encoded) value of a X509 V.3 SubjectKeyIdentifier extension is placed to the signature | | crl | | Base64-encoded certificate revocation list (CRL) is placed to the signature | **KeyInfoID**: Specifies the ID for KeyInfo element.This property contains the identifier (ID) attribute of the ds:KeyInfo element. **KeyInfoX509Chain**: Specifies which certificates from SigningChain are included in the ds:KeyInfo element.Use this property to get or set the list of indices (relative to the SigningChain property) of the certificates to include in the ds:KeyInfo/ds:X509Data element. The value may also be the keywords *none* (include none) or *all* (include the entire chain). The default is *all*. **KeyName**: Contains information about the key used for signing.The KeyName element contains a string value (with significant whitespaces) which may be used by the signer to communicate a key identifier to the recipient. Typically, the KeyName element contains an identifier related to the key pair used to sign the message, but it may contain other protocol-related information that indirectly identifies a key pair. Common uses of the KeyName include simple string names for keys, a key index, a distinguished name (DN), an email address, etc. **ManifestCount**: TBD.TBD **ManifestID[i]**: TBD.TBD **ManifestObjectIndex[i]**: TBD.TBD **ManifestXML[i]**: TBD.TBD **NormalizeNewLine**: Controls whether newline combinations should be automatically normalized.If set to true (the default value), the component will normalize any non-compliant newline characters to match those appropriate for the operating system. **ObjectCount**: TBD.TBD **ObjectEncoding[i]**: TBD.TBD **ObjectID[i]**: TBD.TBD **ObjectMimeType[i]**: TBD.TBD **ObjectSignaturePropertiesCount**: TBD.TBD **ObjectSignaturePropertiesID[i]**: TBD.TBD **ObjectSignaturePropertiesObjectIndex[i]**: TBD.TBD **ObjectSignaturePropertiesXML[i]**: TBD.TBD **ObjectSignaturePropertyCount**: TBD.TBD **ObjectSignaturePropertyID[i]**: TBD.TBD **ObjectSignaturePropertyPropertiesIndex[i]**: TBD.TBD **ObjectSignaturePropertyTarget[i]**: TBD.TBD **ObjectSignaturePropertyXML[i]**: TBD.TBD **ObjectXML[i]**: TBD.TBD **PolicyDescription**: signature policy description.This property specifies the Description of the signature policy. **PolicyExplicitText**: The explicit text of the user notice.Use this property to specify the explicit text of the user notice to be displayed when the signature is verified. **PolicyUNNumbers**: The noticeNumbers part of the NoticeReference CAdES attribute. Defines the "noticeNumbers" part of the NoticeReference signature policy qualifier for CAdES-EPES. **PolicyUNOrganization**: The organization part of the NoticeReference qualifier.Defines the "organization" part of the NoticeReference signature policy qualifier for CAdES-EPES. **ProductionPlace**: Identifies the place of the signature production.The signature production place in JSON format that was included or to be included into the signature. Sample value: '{"addressCountry": "UK", "addressLocality": "London", "postalCode": "N1 7GU", "streetAddress": "20-22 Wenlock Road"}' **PromoteLongOCSPResponses**: Whether long OCSP responses are requested. Set this property to True to force the component to publish the 'long' form of OCSP responses. Otherwise, only BasicOCSPResponse blobs are promoted. **PSSUsed**: Whether to use RSASSA-PSS algorithm.Although the RSASSA-PSS algorithm provides better security than a classic RSA scheme (PKCS#1-1.5), please take into account that RSASSA-PSS is a relatively new algorithm which may not be understood by older implementations. This is an alias for *UsePSS*. **QualifyingPropertiesID**: Specifies the ID for QualifyingProperties element.This property contains the identifier (ID) attribute of the xades:QualifyingProperties element. **QualifyingPropertiesObjectID**: Specifies the ID for object with QualifyingProperties element.This property contains the identifier (ID) attribute of the ds:Object element that contains xades:QualifyingProperties element. **QualifyingPropertiesReferenceCount**: The number of the QualifyingPropertiesReference elements.Returns the number of the xades:QualifyingPropertiesReference elements available. **QualifyingPropertiesReferenceID[Index]**: Specifies the QualifyingPropertiesReference's ID.This property contains an identifier (ID) attribute of the xades:QualifyingPropertiesReference element. Index value could be omitted for the first QualifyingPropertiesReference element. **QualifyingPropertiesReferenceURI[Index]**: Specifies the QualifyingPropertiesReference's URI.This property contains an URI attribute of the xades:QualifyingPropertiesReference element. Index value could be omitted for the first QualifyingPropertiesReference element. **RefsTimestampType**: Specifies references timestamp type to include to the signature.Contains a comma-separated list of values that specifies which references timestamp type to include to the signature when signature upgraded to XAdES-X or XAdES-E-X form. Supported values are: | | | | | --- | --- | --- | | SigAndRefs | | SigAndRefs timestamp | | RefsOnly | | RefsOnly timestamp | **RevocationCacheAgePolicy**: Specifies a preset policy for cached CRL and OCSP response freshness settings.Use this setting to configure all cached revocation freshness settings at once. The default value is Default. Supported values are case-insensitive: | | | | --- | --- | | Default | Applies the AdES default freshness settings: crl:86400;50;600,ocsp:3600;50;600. This means: CRL maximum age 1 day, CRL age ratio 50%, CRL overlap 10 minutes; OCSP response maximum age 1 hour, OCSP response age ratio 50%, OCSP response overlap 10 minutes. This value is the default. | | Disabled | Sets [CachedCRLOverlapTime](#CachedCRLOverlapTime), [CachedOCSPResponseOverlapTime](#CachedOCSPResponseOverlapTime), [CachedCRLMaxAge](#CachedCRLMaxAge), [CachedOCSPResponseMaxAge](#CachedOCSPResponseMaxAge), [CachedCRLMaxAgeRatio](#CachedCRLMaxAgeRatio), and [CachedOCSPResponseMaxAgeRatio](#CachedOCSPResponseMaxAgeRatio) to 0. It only disables the cache-age freshness policy; it does not disable revocation checking or use of the revocation cache. | | Short | Uses crl:43200;50;300,ocsp:1800;50;300. This means: CRL maximum age 12 hours, CRL age ratio 50%, CRL overlap 5 minutes; OCSP response maximum age 30 minutes, OCSP response age ratio 50%, OCSP response overlap 5 minutes. | | Long | Uses crl:518400;50;3600,ocsp:21600;50;3600. This means: CRL maximum age 6 days, CRL age ratio 50%, CRL overlap 1 hour; OCSP response maximum age 6 hours, OCSP response age ratio 50%, OCSP response overlap 1 hour. | | N | Interprets N as an integer number of seconds. The overlap settings are set to N seconds, CRL maximum age is set to N * 144, OCSP response maximum age is set to N * 6, and both ratio settings are set to 50. | | crl:;;,ocsp:;; | Sets the CRL and OCSP response freshness values explicitly. | Ratios must be in the 0..100 range. Maximum age and overlap values must be non-negative. Short and Long are time-scale profiles: Long allows older cached revocation information by increasing maximum ages, but also uses a larger pre-expiry safety margin by increasing overlap times. For individual [CachedCRLOverlapTime](#CachedCRLOverlapTime), [CachedOCSPResponseOverlapTime](#CachedOCSPResponseOverlapTime), [CachedCRLMaxAge](#CachedCRLMaxAge), [CachedOCSPResponseMaxAge](#CachedOCSPResponseMaxAge), [CachedCRLMaxAgeRatio](#CachedCRLMaxAgeRatio), and [CachedOCSPResponseMaxAgeRatio](#CachedOCSPResponseMaxAgeRatio) settings, a value of 0 disables the corresponding freshness check. The individual settings remain available for advanced configuration and can be used after this setting to override specific values. **SchemeParams**: The algorithm scheme parameters to employ.Use this property to specify the parameters of the algorithm scheme if needed. This setting is used to provide parameters for some cryptographic schemes. Use the Name1=Value1;Name2=Value2;... syntax to encode the parameters. For example: *Scheme=PSS;SaltSize=32;TrailerField=1*. **SignatureCompliance**: Specifies the signature compliance mode.Use this property to specify whether the signature is W3C's XMLDSig, or Electronic Banking Internet Communication Standard (EBICS) compliant. Supported values are: | | | | | --- | --- | --- | | "" | | The same as "XML-DSig". | | XML-DSig | | The W3C's XMLDSig-compliant signature (by default). | | EBICS | | Electronic Banking Internet Communication Standard (EBICS) compliant signature. On signing the version is autodetected based on the document element. | | EBICS_H3 | | Electronic Banking Internet Communication Standard (EBICS) compliant signature. The version is H3. | | EBICS_H4 | | Electronic Banking Internet Communication Standard (EBICS) compliant signature. The version is H4. | | EBICS_H5 | | Electronic Banking Internet Communication Standard (EBICS) compliant signature. The version is H5. | **SignatureID**: Specifies the ID for Signature element.This property contains the identifier (ID) attribute of the ds:Signature element. **SignaturePrefix**: Specifies the signature prefix.Specifies the prefix for the Signature elements. Default value is "ds". In this case "ds:" prefix will be used. Special values: | | | | --- | --- | | "#default" or "" | indicates that the prefix will be omitted. | | "#auto" | indicates that the prefix will be auto-detected based on the parent nodes. | **SignatureValueID**: Specifies the ID for SignatureValue element.This property contains the identifier (ID) attribute of the ds:SignatureValue element. **SignedInfoID**: Specifies the ID for SignedInfo element.This property contains the identifier (ID) attribute of the ds:SignedInfo element. **SignedPropertiesID**: Specifies the ID for SignedProperties element.This property contains the identifier (ID) attribute of the xades:SignedProperties element. **SignedPropertiesReferenceCanonicalizationMethod**: Specifies the canonicalization method used in SignedProperties reference.Use this property to specify the canonicalization method for the canonicalization transform of the ds:Reference element that points to xades:SignedProperties element. Use cxcmNone value to not to include canonicalization transform in transform chain. | | | | | --- | --- | --- | | cxcmNone | 0 | | | cxcmCanon | 1 | | | cxcmCanonComment | 2 | | | cxcmExclCanon | 3 | | | cxcmExclCanonComment | 4 | | | cxcmMinCanon | 5 | | | cxcmCanon_v1_1 | 6 | | | cxcmCanonComment_v1_1 | 7 | | **SignedPropertiesReferenceHashAlgorithm**: Specifies the hash algorithm used in SignedProperties reference.Use this property to specify the hash algorithm to be used for the ds:Reference element that points to xades:SignedProperties element. Supported values: | | | | | --- | --- | --- | | SB_HASH_ALGORITHM_MD5 | MD5 | | | SB_HASH_ALGORITHM_SHA1 | SHA1 | | | SB_HASH_ALGORITHM_SHA224 | SHA224 | | | SB_HASH_ALGORITHM_SHA256 | SHA256 | | | SB_HASH_ALGORITHM_SHA384 | SHA384 | | | SB_HASH_ALGORITHM_SHA512 | SHA512 | | | SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | | | SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | | | SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | | | SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | | | SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | | | SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 | | The default value is empty string, in this case, the hash algorithm specified in [HashAlgorithm](#hashalgorithm-property-xmlsigner-component) property is used. **SignedPropertiesReferenceID**: Specifies the ID for Reference element that points to SignedProperties element.This property contains the identifier (ID) attribute of the ds:Reference element that points to xades:SignedProperties element. **SignedPropertiesReferenceInclusiveNamespacesPrefixList**: Specifies the InclusiveNamespaces PrefixList used in SignedProperties reference.Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the ds:Reference element that points to xades:SignedProperties element. **SignedPropertiesReferenceIndex**: Specifies the index of SignedProperties reference.Use this property to specify the reference's index for the ds:Reference element that points to xades:SignedProperties element. **SignedSignaturePropertiesID**: Specifies the ID for SignedSignatureProperties element.This property contains the identifier (ID) attribute of the xades:SignedSignatureProperties element. **SigningCertificatesChain**: Specifies which certificates from SigningChain are included in the xades:SigningCertificate element.Use this property to get or set the list of indices (relative to the SigningChain property) of the certificates to include in the xades:SigningCertificate element. The value may also be the keywords *none* (include none) or *all* (include the entire chain). The default is *all*. **SigningCertificatesHashAlgorithm**: Specifies the hash algorithm used for SigningCertificates.Use this property to specify the hash algorithm to be used for xades:SigningCertificates element. Supported values: | | | | | --- | --- | --- | | SB_HASH_ALGORITHM_MD5 | MD5 | | | SB_HASH_ALGORITHM_SHA1 | SHA1 | | | SB_HASH_ALGORITHM_SHA224 | SHA224 | | | SB_HASH_ALGORITHM_SHA256 | SHA256 | | | SB_HASH_ALGORITHM_SHA384 | SHA384 | | | SB_HASH_ALGORITHM_SHA512 | SHA512 | | | SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | | | SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | | | SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | | | SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | | | SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | | | SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 | | The default value is empty string, in this case, the hash algorithm specified in [HashAlgorithm](#hashalgorithm-property-xmlsigner-component) property is used. **SigningTimeFormat**: Specifies the date time format for the XAdES signing time.This property contains the date time format for the XAdES signing time (xades:SigningTime element under xades:SignedSignatureProperties). Supported values: | | | | | --- | --- | --- | | YYYY | | Year (e.g. 1997) | | YYYY-MM | | Year and month (e.g. 1997-07) | | YYYY-MM-DD | | Complete date (e.g. 1997-07-16) | | YYYY-MM-DDThh:mmTZD | | Complete date plus hours and minutes (e.g. 1997-07-16T19:20+01:00) | | YYYY-MM-DDThh:mm:ssTZD | | Complete date plus hours, minutes and seconds (e.g. 1997-07-16T20:20:30Z) | | YYYY-MM-DDThh:mm:ss.sTZD | | Complete date plus hours, minutes, seconds and a decimal fraction of a second (e.g. 1997-07-16T20:20:30.4Z) | | YYYY-MM-DDThh:mm:ss.sssTZD | | Default. Complete date plus hours, minutes, seconds and a fraction of a second (e.g. 1997-07-16T20:20:30.451Z) | **SigningTimeIsUTC**: Specifies whether the XAdES signing time is in UTC.This property controls how the value provided by [NewSigClaimedSigningTime](#XMLSigner_p_NewSigClaimedSigningTime) is interpreted and serialized into the XAdES signing time (xades:SigningTime element under xades:SignedSignatureProperties). Behavior: | | | | | --- | --- | --- | | "true" | | Default. The provided time is interpreted as UTC. If [SigningTimeZoneOffset](#SigningTimeZoneOffset) is non-zero, the time is converted to the corresponding local time (UTC plus the offset) and serialized with that offset; otherwise it is serialized as UTC. | | "false" | | The provided time is interpreted as local time. No clock-time adjustment is performed. The value is serialized as local time; if [SigningTimeZoneOffset](#SigningTimeZoneOffset) is non-zero, the specified offset is included. | **SigningTimeZoneOffset**: Specifies the time zone offset for the XAdES signing time.This property contains the time zone offset in minutes for the XAdES signing time (xades:SigningTime element under xades:SignedSignatureProperties). **SigPolicyDescription**: signature policy description.This property specifies the Description of the signature policy (an alias for PolicyDescription). **SigPolicyExplicitText**: The explicit text of the user notice.Use this property to specify the explicit text of the user notice to be displayed when the signature is verified (an alias for PolicyExplicitText); **SigPolicyHash**: The EPES policy hash.Use this configuration setting to provide the EPES policy hash. **SigPolicyHashAlgorithm**: The hash algorithm that was used to generate the EPES policy hash.Use this setting to provide the hash algorithm that was used to generate the policy hash. **SigPolicyID**: The EPES policy ID.The EPES signature policy identifier, in dotted OID format (1.2.3.4.5). **SigPolicyNoticeNumbers**: The noticeNumbers part of the NoticeReference CAdES attribute. Defines the "noticeNumbers" part of the NoticeReference signature policy qualifier for CAdES-EPES (an alias for PolicyUNNumbers). **SigPolicyNoticeOrganization**: The organization part of the NoticeReference qualifier.Defines the "organization" part of the NoticeReference signature policy qualifier for CAdES-EPES (an alias for PolicyUNOrganization). **SigPolicyURI**: The EPES policy URI.Assign the EPES policy URI to this setting. **StripWhitespace**: Controls whether excessive whitespace characters should be stripped off when loading the document.Set this property to true to have the component eliminate excessive whitespace from the document on loading. **TempPath**: Path for storing temporary files.This setting specifies an absolute path to the location on disk where temporary files are stored. This setting is supported only in the Java edition for all applicable signing components except [PDFSigner](PDFSigner.md#PDFSigner), where this limitation does not apply. **TimestampCanonicalizationMethod**: Specifies canonicalization method used in timestamp.Use this property to specify the canonicalization method used in timestamp. | | | | | --- | --- | --- | | cxcmNone | 0 | | | cxcmCanon | 1 | | | cxcmCanonComment | 2 | | | cxcmExclCanon | 3 | | | cxcmExclCanonComment | 4 | | | cxcmMinCanon | 5 | | | cxcmCanon_v1_1 | 6 | | | cxcmCanonComment_v1_1 | 7 | | **TimestampResponse**: A base16-encoded timestamp response received from a TSA.When using *virtual://* timestamp endpoints, assign this property in your [Notification](#notification-event-xmlsigner-component) event handler with the TSP response that you receive from the TSA. Remember to encode the response in hex (base16). **TimestampValidationDataDetails**: Specifies timestamp validation data details to include to the signature.Contains a comma-separated list of values that specifies which validation data values details to include to the signature when xades:TimeStampValidationData element added. Supported values are: | | | | | --- | --- | --- | | certificate | | Base64-encoded [X509v3] certificates | | crl | | Base64-encoded certificate revocation lists (CRL) | | ocsp | | OCSP responses | **TLSChainValidationDetails**: Contains the advanced details of the TLS server certificate validation.Check this property in the TLSCertValidate event handler to access the TLS certificate validation details. **TLSChainValidationResult**: Contains the result of the TLS server certificate validation.Check this property in the TLSCertValidate event handler to obtain the TLS certificate validation result. **TLSClientAuthRequested**: Indicates whether the TLS server requests client authentication.Check this property in the TLSCertValidate event handler to find out whether the TLS server requests the client to provide the authentication certificate. If this property is set to true, provide your certificate via the TLSClientChain property. Note that the component may fire this event more than once during each operation, as more than one TLS-enabled server may need to be contacted. **TLSValidationLog**: Contains the log of the TLS server certificate validation.Check this property in the TLSCertValidate event handler to retrieve the validation log of the TLS server. **TolerateMinorChainIssues**: Whether to tolerate minor chain issues.This parameter controls whether the chain validator should tolerate minor technical issues when validating the chain. Those are: - CA, revocation source, TLS key usage requirements are not mandated - Violation of OCSP issuer requirements are ignored - The AuthorityKeyID extension in CRL- and certificate-issuing CAs are ignored (helps with incorrectly renewed certificates) - Basic constraints and name constraints of CA certificates are ignored - Some weaker algorithms are tolerated **TspAttemptCount**: Specifies the number of timestamping request attempts.Use this property to specify a number of timestamping request attempts. In case of a timestamping failure, provide new TSA and HTTP settings inside the [Notification](#notification-event-xmlsigner-component) event handler ('BeforeTimestamp' and 'TimestampError' event IDs). **TspHashAlgorithm**: Sets a specific hash algorithm for use with the timestamping service.In default configuration component uses the 'SHA256' hash algorithm. Use this property to specify a different hash algorithm for the timestamp. Note: Unlike other components, [PDFSigner](PDFSigner.md#PDFSigner) component uses the same hash algorithm for the main signature and any associated timestamps during signing. Use this property to specify a different hash algorithm for the timestamp. **TspReqPolicy**: Sets a request policy ID to include in the timestamping request.Use this property to provide a specific request policy OID to include in the timestamping request. Use the standard human-readable OID notation (1.2.3.4.5). **UseCustomTransformOrder**: Enables custom ordering for the document transforms.Use this property to disable automated ordering of signature transforms. **UseDefaultTrustedLists**: Enables or disables the use of the default TrustedLists.Use this property to tell the validator to use (or not to use) the default TSLs (Trust Service status Lists). The following default TSLs are used: EU (European Union) LOTL (list of trusted lists). **UseDefaultTSLs**: Enables or disables the use of the default TrustedLists.Use this property to tell the validator to use (or not to use) the default TSLs (Trust Service status Lists). The following default TSLs are used: EU (European Union) LOTL (list of trusted lists). **UseEnvStorages**: Enables or disables use of the environment storages.Enable this property to make the chain validation module automatically look up missing CA and intermediate certificates in the environment storages. **UseHMACSigning**: Whether to use HMAC signing.Set this property to true to make the component perform signing using HMAC method, rather than asymmetric cryptography. **UseMicrosoftCTL**: Enables or disables the automatic use of the Microsoft online certificate trust list.Enable this property to make the chain validation module automatically look up missing CA certificates in the public Windows Update repository. **UseMultipleX509DataNodes**: Controls whether certificates are serialized in multiple ds:X509Data nodes under ds:KeyInfo.Use this property to choose the layout of certificates (from SigningCertificate and SigningChain properties) within the ds:KeyInfo element. When set to *true*, the certificates are serialized across several *ds:X509Data* nodes (e.g., one per certificate). When set to *false*, all selected certificates are serialized inside a single *ds:X509Data* node. This setting affects only the structure of *ds:X509Data*, not which certificates are included (see *[KeyInfoX509Chain](#KeyInfoX509Chain)*). The default is *false*. **UsePSS**: Whether to use RSASSA-PSS algorithm.Although the RSASSA-PSS algorithm provides better security than a classic RSA scheme (PKCS#1-1.5), please take into account that RSASSA-PSS is a relatively new algorithm which may not be understood by older implementations. **UseSystemCertificates**: Enables or disables the use of the system certificates.Use this property to tell the chain validation module to automatically look up missing CA certificates in the system certificates. In many cases it is beneficial to switch this property on, as the operating system certificate configuration provides a representative trust framework. **UseValidationCache**: Enables or disable the use of the product-wide certificate chain validation cache.Use this property to enable or disable the use of the global chain validation cache. If enabled, the component will consult the product-wide validation cache when validating the signing chains. Also, the outcomes of any new chain validations performed by the component, both interim and final, will be saved in the cache and available for re-use by any future validations. Disable this property to ignore the cache and always perform the validation from a fresh start. **UseValidatorSettingsForTLSValidation**: Whether to employ the primary chain validator setup for auxiliary TLS chain validations.Use this property to specify whether you would like to use the primary (AdES) chain validator component to validate TLS chains for any connections involved (OCSP, CRL). **ValidationDataRefsDetails**: Specifies validation data references details to include to the signature.Contains a comma-separated list of values that specifies which validation data references details to include to the signature when signature upgraded to XAdES-C or XAdES-E-C form. Supported values are: | | | | | --- | --- | --- | | certificate | | References to X.509 certificates | | crl | | References to certificate revocation lists (CRL) | | ocsp | | References to OCSP responses | **ValidationDataRefsHashAlgorithm**: Specifies the hash algorithm used in validation data references.Use this property to specify the hash algorithm used to compute hashes for validation data references. Supported values: | | | | | --- | --- | --- | | SB_HASH_ALGORITHM_MD5 | MD5 | | | SB_HASH_ALGORITHM_SHA1 | SHA1 | | | SB_HASH_ALGORITHM_SHA224 | SHA224 | | | SB_HASH_ALGORITHM_SHA256 | SHA256 | | | SB_HASH_ALGORITHM_SHA384 | SHA384 | | | SB_HASH_ALGORITHM_SHA512 | SHA512 | | | SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | | | SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | | | SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | | | SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | | | SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | | | SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 | | The default value is empty string, in this case, the hash algorithm specified in [HashAlgorithm](#hashalgorithm-property-xmlsigner-component) property is used. **ValidationDataValuesDetails**: Specifies validation data values details to include to the signature.Contains a comma-separated list of values that specifies which validation data values details to include to the signature when signature upgraded to XAdES-X-L or XAdES-E-X-L form. Supported values are: | | | | | --- | --- | --- | | certificate | | Base64-encoded [X509v3] certificates | | crl | | Base64-encoded certificate revocation lists (CRL) | | ocsp | | OCSP responses | **WriteBOM**: Specifies whether byte-order mark should be written when saving the document.Set this property to False to disable writing byte-order mark (BOM) when saving the XML document in Unicode encoding. **XAdESPrefix**: Specifies the XAdES prefix.Specifies the prefix for the XAdES elements. Default value is "xades". In this case "xades:" prefix will be used. Special values: | | | | --- | --- | | "#default" or "" | indicates that the prefix will be omitted. | | "#auto" | indicates that the prefix will be auto-detected based on the parent nodes. | **XAdESv141Prefix**: Specifies the XAdES v1.4.1 prefix.Specifies the prefix for the XAdES v1.4.1 elements. Default value is "xadesv141". In this case "xadesv141:" prefix will be used. Special values: | | | | --- | --- | | "#default" or "" | indicates that the prefix will be omitted. | | "#auto" | indicates that the prefix will be auto-detected based on the parent nodes. | **XMLFormatting**: Specifies the signature XML formatting.Use this property to specify how the signature should be formatted. Supported values: | | | | | --- | --- | --- | | "" or "none" | | no formatting (by default). | | "auto" | | enables auto-formatting, equivalent to: "indent: 1; indent-char: tab; base64-max-length: 64; starting-level: node" | Custom values, contains a list of value pairs ("name:value") separated by comma or semicolon: | | | | | --- | --- | --- | | indent | | specifies indentation level (default is 1) | | indent-char | | specifies indentation character: "space" or "tab" (default) | | base64-max-length | | specifies max length of base64 encoded data, such as signature value, certificate data and etc. (default is 64) | | starting-level | | specifies starting indentation level: non-negative integer or "node" - detected based on parent node, or "root" - detected based on number of parent nodes to a document element (default is "node"). | | indent-before-main | | specifies if whitespace characters should be inserted before a main (ds:Signature) element: "auto" (default), "yes" or "no" | For more precise formatting use OnFormatText and OnFormatElement events. **XMLSerializationCanonicalizationMethod**: Specifies the canonicalization method to use for serialization.Use this property to specify how the XML document should be serialized. Supported values: - cxcmNone (0) - cxcmCanon (1) - cxcmCanonComment (2) - cxcmExclCanon (3) - cxcmExclCanonComment (4) - cxcmMinCanon (5) - cxcmCanon_v1_1 (6) **XMLSerializationMode**: Specifies the serialization mode for the extracted part of XML document.Use this property to specify how the document piece should be serialized by [GetInnerXML](#getinnerxml-method-xmlsigner-component) and [GetOuterXML](#getouterxml-method-xmlsigner-component) methods. Supported values: | | | | | --- | --- | --- | | "completefragment" | | as complete fragment (the default setting). | | "rawtree" | | as a raw tree | ### Base Config Settings **ASN1UseGlobalTagCache**: Controls whether ASN.1 module should use a global object cache.This is a performance setting. It is unlikely that you will ever need to adjust it. **AssignSystemSmartCardPins**: Specifies whether CSP-level PINs should be assigned to CNG keys.This is a low-level tweak for certain cryptographic providers. It is unlikely that you will ever need to adjust it. **CheckKeyIntegrityBeforeUse**: Enables or disable private key integrity check before use.This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used. You can switch this property off to improve performance if your project only uses known, good private keys. **CookieCaching**: Specifies whether a cookie cache should be used for HTTP(S) transports.Set this property to enable or disable cookies caching for the component. Supported values are: | | | | | --- | --- | --- | | off | | No caching (default) | | local | | Local caching | | global | | Global caching | **Cookies**: Gets or sets local cookies for the component.Use this property to get cookies from the internal cookie storage of the component and/or restore them back between application sessions. **DefDeriveKeyIterations**: Specifies the default key derivation algorithm iteration count.This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided. **DNSLocalSuffix**: The suffix to assign for TLD names.Use this global setting to adjust the default suffix to assign to top-level domain names. The default is *.local*. **EnableClientSideSSLFFDHE**: Enables or disables finite field DHE key exchange support in TLS clients.This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections. This setting only applies to sessions negotiated with TLS version 1.3. **EnableSSHMLKEM**: Enables support for ML-KEM/hybrid key exchange algorithms in SSH client and server components.Use this setting to enable hybrid key exchange algorithms in client and server SSH and SFTP components. This is a global setting that enables ML-KEM blanketly in all SSH-dependent components. **EnableTLSMLKEM**: Enables support for ML-KEM and hybrid groups in TLS client and server components.Use this setting to enable ML-KEM and hybrid key exchange groups in client and server TLS components. This is a global setting that enables ML-KEM blanketly in all TLS-dependent components. **GlobalCookies**: Gets or sets global cookies for all the HTTP transports.Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the components that have its *CookieCaching* property set to "global". **HardwareCryptoUsePolicy**: The hardware crypto usage policy.This global setting controls the hardware cryptography usage policy. Supported Values: | | | | --- | --- | | auto | Use hardware cryptography if available; otherwise, fall back to software-based cryptography (default). | | enable | Always attempt to use hardware cryptography. If unavailable, exception will be thrown. | | disable | Do not use hardware cryptography. | **HttpUserAgent**: Specifies the user agent name to be used by all HTTP clients.This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other components. **HttpVersion**: The HTTP version to use in any inner HTTP client components created.Set this property to 1.0 or 1.1 to indicate the HTTP version that any internal HTTP clients should use. **IgnoreExpiredMSCTLSigningCert**: Whether to tolerate the expired Windows Update signing certificate.It is not uncommon for Microsoft Windows Update Certificate Trust List to be signed with an expired Microsoft certificate. Setting this global property to true makes SBB ignore the expired factor and take the Trust List into account. **ListDelimiter**: The delimiter character for multi-element lists.Allows to set the delimiter for any multi-entry values returned by the component as a string object, such as file lists. For most of the components, this property is set to a newline sequence. **LogDestination**: Specifies the debug log destination.Contains a comma-separated list of values that specifies where debug log should be dumped. Supported values are: | | | | | --- | --- | --- | | file | | File | | console | | Console | | systemlog | | System Log (supported for Android only) | | debugger | | Debugger (supported for VCL for Windows and .Net) | **LogDetails**: Specifies the debug log details to dump.Contains a comma-separated list of values that specifies which debug log details to dump. Supported values are: | | | | | --- | --- | --- | | time | | Current time | | level | | Level | | package | | Package name | | module | | Module name | | class | | Class name | | method | | Method name | | threadid | | Thread Id | | contenttype | | Content type | | content | | Content | | all | | All details | **LogFile**: Specifies the debug log filename.Use this property to provide a path to the log file. **LogFilters**: Specifies the debug log filters.Contains a comma-separated list of value pairs ("name:value") that describe filters. Supported filter names are: | | | | | --- | --- | --- | | exclude-package | | Exclude a package specified in the value | | exclude-module | | Exclude a module specified in the value | | exclude-class | | Exclude a class specified in the value | | exclude-method | | Exclude a method specified in the value | | include-package | | Include a package specified in the value | | include-module | | Include a module specified in the value | | include-class | | Include a class specified in the value | | include-method | | Include a method specified in the value | **LogFlushMode**: Specifies the log flush mode.Use this property to set the log flush mode. The following values are defined: | | | | | --- | --- | --- | | none | | No flush (caching only) | | immediate | | Immediate flush (real-time logging) | | maxcount | | Flush cached entries upon reaching LogMaxEventCount entries in the cache. | **LogLevel**: Specifies the debug log level.Use this property to provide the desired debug log level. Supported values are: | | | | | --- | --- | --- | | none | | None (by default) | | fatal | | Severe errors that cause premature termination. | | error | | Other runtime errors or unexpected conditions. | | warning | | Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong". | | info | | Interesting runtime events (startup/shutdown). | | debug | | Detailed information on flow of through the system. | | trace | | More detailed information. | **LogMaxEventCount**: Specifies the maximum number of events to cache before further action is taken.Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode. The default value of this setting is 100. **LogRotationMode**: Specifies the log rotation mode.Use this property to set the log rotation mode. The following values are defined: | | | | | --- | --- | --- | | none | | No rotation | | deleteolder | | Delete older entries from the cache upon reaching LogMaxEventCount | | keepolder | | Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded) | **MaxASN1BufferLength**: Specifies the maximal allowed length for ASN.1 primitive tag data.This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks. **MaxASN1TreeDepth**: Specifies the maximal depth for processed ASN.1 trees.This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks. **OCSPHashAlgorithm**: Specifies the hash algorithm to be used to identify certificates in OCSP requests.This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful. **OldClientSideRSAFallback**: Specifies whether the SSH client should use a SHA1 fallback.Tells the SSH client to use a legacy ssh-rsa authentication even if the server indicates support for newer algorithms, such as rsa-sha-256. This is a backward-compatibility tweak. **PKICache**: Specifies which PKI elements (certificates, CRLs, OCSP responses) should be cached.The PKICache setting specifies which Public Key Infrastructure (PKI) elements should be cached to optimize performance and reduce retrieval times. It supports comma-separated values to indicate the specific types of PKI data that should be cached. Supported Values: | | | | --- | --- | | certificate | Enables caching of certificates. | | crl | Enables caching of Certificate Revocation Lists (CRLs). | | ocsp | Enables caching of OCSP (Online Certificate Status Protocol) responses. | Example (default value): ```text PKICache=certificate,crl,ocsp ``` In this example, the component caches certificates, CRLs, and OCSP responses. **PKICachePath**: Specifies the file system path where cached PKI data is stored.The PKICachePath setting defines the file system path where cached PKI data (e.g., certificates, CRLs, OCSP responses and Trusted Lists) will be stored. This allows the system to persistently save and retrieve PKI cache data, even across application restarts. The default value is an empty string - no cached PKI data is stored on disk. Example: ```text PKICachePath=C:\Temp\cache ``` In this example, the cached PKI data is stored in the C:\Temp\cache directory. **ProductVersion**: Returns the version of the SecureBlackbox library.This property returns the long version string of the SecureBlackbox library being used (major.minor.build.revision). **ServerSSLDHKeyLength**: Sets the size of the TLS DHE key exchange group.Use this property to adjust the length, in bits, of the DHE prime to be used by the TLS server. **StaticDNS**: Specifies whether static DNS rules should be used.Set this property to enable or disable static DNS rules for the component. Works only if *UseOwnDNSResolver* is set to *true*. Supported values are: | | | | | --- | --- | --- | | none | | No static DNS rules (default) | | local | | Local static DNS rules | | global | | Global static DNS rules | **StaticIPAddress[domain]**: Gets or sets an IP address for the specified domain name.Use this property to get or set an IP address for the specified domain name in the internal (of the component) or global DNS rules storage depending on the *StaticDNS* value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are divided by the | (pipe) character. **StaticIPAddresses**: Gets or sets all the static DNS rules.Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If *StaticDNS* of the component is set to "*local*", the property returns/restores the rules from/to the internal storage of the component. If *StaticDNS* of the component is set to "*global*", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format. **Tag**: Allows to store any custom data.Use this config property to store any custom data. **TLSSessionGroup**: Specifies the group name of TLS sessions to be used for session resumption.Use this property to limit the search of cached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the components. **TLSSessionLifetime**: Specifies lifetime in seconds of the cached TLS session.Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes). **TLSSessionPurgeInterval**: Specifies how often the session cache should remove the expired TLS sessions.Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute). **UseCRLObjectCaching**: Specifies whether reuse of loaded CRL objects is enabled.This setting enables or disables the caching of CRL objects. When set to true (the default value), the system checks if a CRL object is already loaded in memory before attempting to load a new instance. If the object is found, the existing instance is reused, and its reference count is incremented to track its usage. When the reference count reaches zero, indicating that no references to the object remain, the system will free the object from memory. This setting enhances performance by minimizing unnecessary object instantiation and promotes efficient memory management, particularly in scenarios where CRL objects are frequently used. **UseInternalRandom**: Switches between SecureBlackbox-own and platform PRNGs.Allows to switch between internal/native PRNG implementation and the one provided by the platform. **UseLegacyAdESValidation**: Enables legacy AdES validation mode.Use this setting to switch the AdES component to the validation approach that was used in SBB 2020/SBB 2022 (less attention to temporal details). **UseOCSPResponseObjectCaching**: Specifies whether reuse of loaded OCSP response objects is enabled.This setting enables or disables the caching of OCSP response objects. When set to true (the default value), the system checks if a OCSP response object is already loaded in memory before attempting to load a new instance. If the object is found, the existing instance is reused, and its reference count is incremented to track its usage. When the reference count reaches zero, indicating that no references to the object remain, the system will free the object from memory. This setting enhances performance by minimizing unnecessary object instantiation and promotes efficient memory management, particularly in scenarios where OCSP response objects are frequently used. **UseOwnDNSResolver**: Specifies whether the client components should use own DNS resolver.Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one. **UseSharedSystemStorages**: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.Set this global property to false to make each validation run use its own copy of system certificate stores. **UseSystemNativeSizeCalculation**: An internal CryptoAPI access tweak.This is an internal setting. Please do not use it unless instructed by the support team. **UseSystemOAEPAndPSS**: Enforces or disables the use of system-driven RSA OAEP and PSS computations.This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation. This setting only applies to certificates originating from a Windows system store. **UseSystemRandom**: Enables or disables the use of the OS PRNG.Use this global property to enable or disable the use of operating system-driven pseudorandom number generation. **XMLRDNDescriptorName[OID]**: Defines an OID mapping to descriptor names for the certificate's IssuerRDN or SubjectRDN.This property defines custom mappings between Object Identifiers (OIDs) and descriptor names. This mapping specifies how the certificate's issuer and subject information (ds:IssuerRDN and ds:SubjectRDN elements respectively) are represented in XML signatures. The property accepts comma-separated values where the first descriptor name is used when the OID is mapped, and subsequent values act as aliases for parsing. Syntax: ```text Config("XMLRDNDescriptorName[OID]=PrimaryName,Alias1,Alias2"); ``` Where: OID: The Object Identifier from the certificate's IssuerRDN or SubjectRDN that you want to map. PrimaryName: The main descriptor name used in the XML signature when the OID is encountered. Alias1, Alias2, ...: Optional alternative names recognized during parsing. Usage Examples: Map OID 2.5.4.5 to SERIALNUMBER: ```text Config("XMLRDNDescriptorName[2.5.4.5]=SERIALNUMBER"); ``` Map OID 1.2.840.113549.1.9.1 to E, with aliases EMAIL and EMAILADDRESS: ```text Config("XMLRDNDescriptorName[1.2.840.113549.1.9.1]=E,EMAIL,EMAILADDRESS"); ``` **XMLRDNDescriptorPriority[OID]**: Specifies the priority of descriptor names associated with a specific OID.This property specifies the priority of descriptor names associated with a specific OID that allows to reorder descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during signing. **XMLRDNDescriptorReverseOrder**: Specifies whether to reverse the order of descriptors in RDN.Specifies whether to reverse the order of descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during XML signing. By default, this property is set to true (as specified in RFC 2253, 2.1). **XMLRDNDescriptorSeparator**: Specifies the separator used between descriptors in RDN.Specifies the separator used between descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during XML signing. By default, this property is set to ", " value. # Trappable Errors ([XMLSigner](#xmlsigner-component) Component) ### XMLSigner Errors | | | | --- | --- | | 1048577 | Invalid parameter ([SB_ERROR_INVALID_PARAMETER](constants.md#const_SBERRORINVALIDPARAMETER)) | | 1048578 | Invalid configuration ([SB_ERROR_INVALID_SETUP](constants.md#const_SBERRORINVALIDSETUP)) | | 1048579 | Invalid state ([SB_ERROR_INVALID_STATE](constants.md#const_SBERRORINVALIDSTATE)) | | 1048580 | Invalid value ([SB_ERROR_INVALID_VALUE](constants.md#const_SBERRORINVALIDVALUE)) | | 1048581 | Private key not found ([SB_ERROR_NO_PRIVATE_KEY](constants.md#const_SBERRORNOPRIVATEKEY)) | | 1048582 | Cancelled by the user ([SB_ERROR_CANCELLED_BY_USER](constants.md#const_SBERRORCANCELLEDBYUSER)) | | 1048583 | The file was not found ([SB_ERROR_NO_SUCH_FILE](constants.md#const_SBERRORNOSUCHFILE)) | | 1048584 | Unsupported feature or operation ([SB_ERROR_UNSUPPORTED_FEATURE](constants.md#const_SBERRORUNSUPPORTEDFEATURE)) | | 1048585 | General error ([SB_ERROR_GENERAL_ERROR](constants.md#const_SBERRORGENERALERROR)) | | 39845889 | The input file does not exist ([SB_ERROR_XML_INPUTFILE_NOT_EXISTS](constants.md#const_SBERRORXMLINPUTFILENOTEXISTS)) | | 39845890 | Data file does not exist ([SB_ERROR_XML_DATAFILE_NOT_EXISTS](constants.md#const_SBERRORXMLDATAFILENOTEXISTS)) | | 39845892 | Unsupported hash algorithm ([SB_ERROR_XML_UNSUPPORTED_HASH_ALGORITHM](constants.md#const_SBERRORXMLUNSUPPORTEDHASHALGORITHM)) | | 39845893 | Unsupported key type ([SB_ERROR_XML_UNSUPPORTED_KEY_TYPE](constants.md#const_SBERRORXMLUNSUPPORTEDKEYTYPE)) | | 39845895 | Unsupported encryption algorithm ([SB_ERROR_XML_INVALID_ENCRYPTION_METHOD](constants.md#const_SBERRORXMLINVALIDENCRYPTIONMETHOD)) | | 39845896 | XML element not found ([SB_ERROR_XML_NOT_FOUND](constants.md#const_SBERRORXMLNOTFOUND)) | | 39845897 | XML element has no ID ([SB_ERROR_XML_NO_ELEMENT_ID](constants.md#const_SBERRORXMLNOELEMENTID)) |