# MessageCompressor Class

The MessageCompressor class compresses data and stores it in the PKCS#7 format.

## Syntax

```text
class secureblackbox.MessageCompressor
```

## Remarks

PKCS#7 (Public Key Cryptography Standard #7) is a common format used to store encrypted, signed, compressed, and timestamped data. It is used by a variety of protocols, including S/MIME and CMS.

MessageCompressor and MessageDecompressor provide easy access to PKCS#7 CompressedData subformat. They are quite straightforward to configure and use:

- Set up the desired [compression_level](#compression_level-property)
- Provide input and output destinations via [input_bytes](#input_bytes-property), [input_file](#input_file-property), [output_bytes](#output_bytes-property), and [output_file](#output_file-property) properties.
- Call [compress](#compress-method) to execute the operation.

 Note that this component only works with PKCS#7 CompressedData format. To compress files to popular archive formats (ZIP, GZIP, BZIP2), see [ArchiveWriter](ArchiveWriter.md#ArchiveWriter).

```text
MessageCompressor compressor = new MessageCompressor();

compressor.setCompressionLevel(4); //compression level (1 to 9). Default value is 6.

//path of the file where the decompressed message is located
compressor.setInputFile("./decompressedMessage.txt");

//path of the file where the compressed message will be written
compressor.setOutputFile("./compressedMessage.bin");

compressor.compress(); //compressing the file
```

## Property List

*The following is the full list of the properties of the class with short descriptions. Click on the links for further details.*

|  |  |
| --- | --- |
| [compression_level](#compression_level-property) | Compression level to apply (1-9). |
| [fips_mode](#fips_mode-property) | Reserved. |
| [input_bytes](#input_bytes-property) | Use this property to pass the input to class in byte array form. |
| [input_file](#input_file-property) | Path to the source (uncompressed) file. |
| [output_bytes](#output_bytes-property) | Use this property to read the output the class object has produced. |
| [output_file](#output_file-property) | Path to the destination (compressed) file. |

## Method List

*The following is the full list of the methods of the class with short descriptions. Click on the links for further details.*

|  |  |
| --- | --- |
| [compress](#compress-method) | Compresses input data into a PKCS7 message. |
| [config](#config-method) | Sets or retrieves a configuration setting. |
| [do_action](#do_action-method) | Performs an additional action. |
| [reset](#reset-method) | Resets the class settings. |

## Event List

*The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.*

|  |  |
| --- | --- |
| [on_error](#on_error-event) | Information about errors during PKCS#7 message encryption. |
| [on_notification](#on_notification-event) | This event notifies the application about an underlying control flow event. |

## Config Settings

*The following is a list of config settings for the class with short descriptions. Click on the links for further details.*

|  |  |
| --- | --- |
| [ContentType](#ContentType) | Content type. |
| [FragmentSize](#FragmentSize) | Fragment size. |
| [TempPath](#TempPath) | Path for storing temporary files. |
| [UseUndefSize](#UseUndefSize) | Allows or forbids the use of ASN.1 tags of undefined size. |
| [ASN1UseGlobalTagCache](#ASN1UseGlobalTagCache) | Controls whether ASN.1 module should use a global object cache. |
| [AssignSystemSmartCardPins](#AssignSystemSmartCardPins) | Specifies whether CSP-level PINs should be assigned to CNG keys. |
| [CheckKeyIntegrityBeforeUse](#CheckKeyIntegrityBeforeUse) | Enables or disable private key integrity check before use. |
| [CookieCaching](#CookieCaching) | Specifies whether a cookie cache should be used for HTTP(S) transports. |
| [Cookies](#Cookies) | Gets or sets local cookies for the class. |
| [DefDeriveKeyIterations](#DefDeriveKeyIterations) | Specifies the default key derivation algorithm iteration count. |
| [DNSLocalSuffix](#DNSLocalSuffix) | The suffix to assign for TLD names. |
| [EnableClientSideSSLFFDHE](#EnableClientSideSSLFFDHE) | Enables or disables finite field DHE key exchange support in TLS clients. |
| [EnableSSHMLKEM](#EnableSSHMLKEM) | Enables support for ML-KEM/hybrid key exchange algorithms in SSH client and server classes. |
| [EnableTLSMLKEM](#EnableTLSMLKEM) | Enables support for ML-KEM and hybrid groups in TLS client and server classes. |
| [GlobalCookies](#GlobalCookies) | Gets or sets global cookies for all the HTTP transports. |
| [HardwareCryptoUsePolicy](#HardwareCryptoUsePolicy) | The hardware crypto usage policy. |
| [HttpUserAgent](#HttpUserAgent) | Specifies the user agent name to be used by all HTTP clients. |
| [HttpVersion](#HttpVersion) | The HTTP version to use in any inner HTTP client classes created. |
| [IgnoreExpiredMSCTLSigningCert](#IgnoreExpiredMSCTLSigningCert) | Whether to tolerate the expired Windows Update signing certificate. |
| [ListDelimiter](#ListDelimiter) | The delimiter character for multi-element lists. |
| [LogDestination](#LogDestination) | Specifies the debug log destination. |
| [LogDetails](#LogDetails) | Specifies the debug log details to dump. |
| [LogFile](#LogFile) | Specifies the debug log filename. |
| [LogFilters](#LogFilters) | Specifies the debug log filters. |
| [LogFlushMode](#LogFlushMode) | Specifies the log flush mode. |
| [LogLevel](#LogLevel) | Specifies the debug log level. |
| [LogMaxEventCount](#LogMaxEventCount) | Specifies the maximum number of events to cache before further action is taken. |
| [LogRotationMode](#LogRotationMode) | Specifies the log rotation mode. |
| [MaxASN1BufferLength](#MaxASN1BufferLength) | Specifies the maximal allowed length for ASN.1 primitive tag data. |
| [MaxASN1TreeDepth](#MaxASN1TreeDepth) | Specifies the maximal depth for processed ASN.1 trees. |
| [OCSPHashAlgorithm](#OCSPHashAlgorithm) | Specifies the hash algorithm to be used to identify certificates in OCSP requests. |
| [OldClientSideRSAFallback](#OldClientSideRSAFallback) | Specifies whether the SSH client should use a SHA1 fallback. |
| [PKICache](#PKICache) | Specifies which PKI elements (certificates, CRLs, OCSP responses) should be cached. |
| [PKICachePath](#PKICachePath) | Specifies the file system path where cached PKI data is stored. |
| [ProductVersion](#ProductVersion) | Returns the version of the SecureBlackbox library. |
| [ServerSSLDHKeyLength](#ServerSSLDHKeyLength) | Sets the size of the TLS DHE key exchange group. |
| [StaticDNS](#StaticDNS) | Specifies whether static DNS rules should be used. |
| [StaticIPAddress\[domain\]](#StaticIPAddress[domain]) | Gets or sets an IP address for the specified domain name. |
| [StaticIPAddresses](#StaticIPAddresses) | Gets or sets all the static DNS rules. |
| [Tag](#Tag) | Allows to store any custom data. |
| [TLSSessionGroup](#TLSSessionGroup) | Specifies the group name of TLS sessions to be used for session resumption. |
| [TLSSessionLifetime](#TLSSessionLifetime) | Specifies lifetime in seconds of the cached TLS session. |
| [TLSSessionPurgeInterval](#TLSSessionPurgeInterval) | Specifies how often the session cache should remove the expired TLS sessions. |
| [UseCRLObjectCaching](#UseCRLObjectCaching) | Specifies whether reuse of loaded CRL objects is enabled. |
| [UseInternalRandom](#UseInternalRandom) | Switches between SecureBlackbox-own and platform PRNGs. |
| [UseLegacyAdESValidation](#UseLegacyAdESValidation) | Enables legacy AdES validation mode. |
| [UseOCSPResponseObjectCaching](#UseOCSPResponseObjectCaching) | Specifies whether reuse of loaded OCSP response objects is enabled. |
| [UseOwnDNSResolver](#UseOwnDNSResolver) | Specifies whether the client classes should use own DNS resolver. |
| [UseSharedSystemStorages](#UseSharedSystemStorages) | Specifies whether the validation engine should use a global per-process copy of the system certificate stores. |
| [UseSystemNativeSizeCalculation](#UseSystemNativeSizeCalculation) | An internal CryptoAPI access tweak. |
| [UseSystemOAEPAndPSS](#UseSystemOAEPAndPSS) | Enforces or disables the use of system-driven RSA OAEP and PSS computations. |
| [UseSystemRandom](#UseSystemRandom) | Enables or disables the use of the OS PRNG. |
| [XMLRDNDescriptorName\[OID\]](#XMLRDNDescriptorName[OID]) | Defines an OID mapping to descriptor names for the certificate's IssuerRDN or SubjectRDN. |
| [XMLRDNDescriptorPriority\[OID\]](#XMLRDNDescriptorPriority[OID]) | Specifies the priority of descriptor names associated with a specific OID. |
| [XMLRDNDescriptorReverseOrder](#XMLRDNDescriptorReverseOrder) | Specifies whether to reverse the order of descriptors in RDN. |
| [XMLRDNDescriptorSeparator](#XMLRDNDescriptorSeparator) | Specifies the separator used between descriptors in RDN. |

# compression_level property

Compression level to apply (1-9).

## Syntax

```text
def get_compression_level() -> int: ...
def set_compression_level(value: int) -> None: ...
compression_level = property(get_compression_level, set_compression_level)
```

## Default Value

6

## Remarks

Use this property to specify the compression level to use, from 1 (the lightest, but quickest) to 9 (the best, but the slowest).

# fips_mode property

Reserved.

## Syntax

```text
def get_fips_mode() -> bool: ...
def set_fips_mode(value: bool) -> None: ...
fips_mode = property(get_fips_mode, set_fips_mode)
```

## Default Value

FALSE

## Remarks

This property is reserved for future use.

# input_bytes property

Use this property to pass the input to class in byte array form.

## Syntax

```text
def get_input_bytes() -> bytes: ...
def set_input_bytes(value: bytes) -> None: ...
input_bytes = property(get_input_bytes, set_input_bytes)
```

## Remarks

Assign a byte array containing the data to be processed to this property.

# input_file property

Path to the source (uncompressed) file.

## Syntax

```text
def get_input_file() -> str: ...
def set_input_file(value: str) -> None: ...
input_file = property(get_input_file, set_input_file)
```

## Default Value

""

## Remarks

Use this property to provide the compression source.

# output_bytes property

Use this property to read the output the class object has produced.

## Syntax

```text
def get_output_bytes() -> bytes: ...
output_bytes = property(get_output_bytes, None)
```

## Remarks

Read the contents of this property after the operation has completed to read the produced output. This property will only be set if the [output_file](#output_file-property) and output_stream properties had not been assigned.

This property is read-only.

# output_file property

Path to the destination (compressed) file.

## Syntax

```text
def get_output_file() -> str: ...
def set_output_file(value: str) -> None: ...
output_file = property(get_output_file, set_output_file)
```

## Default Value

""

## Remarks

Use this property to specify the file where the compressed PKCS#7 message is to be saved.

# compress method

Compresses input data into a PKCS7 message.

## Syntax

```text
def compress() -> None: ...
```

## Remarks

Call this method to compress the data residing provided via [input_file](#input_file-property) (or input_stream) and save the output in [output_file](#output_file-property) (output_stream).

# config method

Sets or retrieves a configuration setting.

## Syntax

```text
def config(configuration_string: str) -> str: ...
```

## Remarks

config is a generic method available in every class. It is used to set and retrieve [configuration settings](#messagecompressor-config-settings) for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these *internal properties* is provided through the config method.

To set a configuration setting named *PROPERTY*, you must call *Config("PROPERTY=VALUE")*, where *VALUE* is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a [configuration setting](#messagecompressor-config-settings), you must call *Config("PROPERTY")*. The value will be returned as a string.

# do_action method

Performs an additional action.

## Syntax

```text
def do_action(action_id: str, action_params: str) -> str: ...
```

## Remarks

do_action is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the *ActionID* parameter.

*ActionParams* contains the value of a single parameter, or a list of multiple parameters for the action in the form of *PARAM1=VALUE1;PARAM2=VALUE2;...*.

Common ActionIDs:

|  |  |  |  |
| --- | --- | --- | --- |
| Action | Parameters | Returned value | Description |
| ResetTrustedListCache | none | none | Clears the cached list of trusted lists. |
| ResetCertificateCache | none | none | Clears the cached certificates. |
| ResetCRLCache | none | none | Clears the cached CRLs. |
| ResetOCSPResponseCache | none | none | Clears the cached OCSP responses. |

# reset method

Resets the class settings.

## Syntax

```text
def reset() -> None: ...
```

## Remarks

reset is a generic method available in every class.

# on_error event

Information about errors during PKCS#7 message encryption.

## Syntax

```text
class MessageCompressorErrorEventParams(object):
  @property
  def error_code() -> int: ...

  @property
  def description() -> str: ...

# In class MessageCompressor:
@property
def on_error() -> Callable[[MessageCompressorErrorEventParams], None]: ...
@on_error.setter
def on_error(event_hook: Callable[[MessageCompressorErrorEventParams], None]) -> None: ...
```

## Remarks

The event is fired in case of exceptional conditions during message processing.

*ErrorCode* contains an error code and *Description* contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the [Messages](#messagecompressor-errors) section.

# on_notification event

This event notifies the application about an underlying control flow event.

## Syntax

```text
class MessageCompressorNotificationEventParams(object):
  @property
  def event_id() -> str: ...

  @property
  def event_param() -> str: ...

# In class MessageCompressor:
@property
def on_notification() -> Callable[[MessageCompressorNotificationEventParams], None]: ...
@on_notification.setter
def on_notification(event_hook: Callable[[MessageCompressorNotificationEventParams], None]) -> None: ...
```

## Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the *EventID* parameter. *EventParam* contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

This class can fire this event with the following *EventID* values:

|  |  |
| --- | --- |
| Progress | Fires periodically to report the progress of the current operation. The EventParam parameter contains a slash-separated pair of values (Current/Total). |

# MessageCompressor Config Settings

 The class accepts one or more of the following *configuration settings*. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these *internal properties* is provided through the [config](#config-method) method.

### MessageCompressor Config Settings

**ContentType**: Content type.The Content type.

**FragmentSize**: Fragment size.Fragment size.

**TempPath**: Path for storing temporary files.This setting specifies an absolute path to the location on disk where temporary files are stored. This setting is supported only in the Java edition for all applicable signing components except [PDFSigner](PDFSigner.md#PDFSigner), where this limitation does not apply.

**UseUndefSize**: Allows or forbids the use of ASN.1 tags of undefined size.Usually PKCS#7 messages are handled correctly when undefined-size tags are used. However some ASN.1 parsers (S/MIME handler in Outlook Express, security plugins of Adobe Acrobat) can't correctly handle such tags. If you are targeting such software, you need this property.

### Base Config Settings

**ASN1UseGlobalTagCache**: Controls whether ASN.1 module should use a global object cache.This is a performance setting. It is unlikely that you will ever need to adjust it.

**AssignSystemSmartCardPins**: Specifies whether CSP-level PINs should be assigned to CNG keys.This is a low-level tweak for certain cryptographic providers. It is unlikely that you will ever need to adjust it.

**CheckKeyIntegrityBeforeUse**: Enables or disable private key integrity check before use.This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

**CookieCaching**: Specifies whether a cookie cache should be used for HTTP(S) transports.Set this property to enable or disable cookies caching for the class.

Supported values are:

|  |  |  |
| --- | --- | --- |
| off |  | No caching (default) |
| local |  | Local caching |
| global |  | Global caching |

**Cookies**: Gets or sets local cookies for the class.Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

**DefDeriveKeyIterations**: Specifies the default key derivation algorithm iteration count.This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

**DNSLocalSuffix**: The suffix to assign for TLD names.Use this global setting to adjust the default suffix to assign to top-level domain names. The default is *.local*.

**EnableClientSideSSLFFDHE**: Enables or disables finite field DHE key exchange support in TLS clients.This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

**EnableSSHMLKEM**: Enables support for ML-KEM/hybrid key exchange algorithms in SSH client and server components.Use this setting to enable hybrid key exchange algorithms in client and server SSH and SFTP components. This is a global setting that enables ML-KEM blanketly in all SSH-dependent components.

**EnableTLSMLKEM**: Enables support for ML-KEM and hybrid groups in TLS client and server components.Use this setting to enable ML-KEM and hybrid key exchange groups in client and server TLS components. This is a global setting that enables ML-KEM blanketly in all TLS-dependent components.

**GlobalCookies**: Gets or sets global cookies for all the HTTP transports.Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its *CookieCaching* property set to "global".

**HardwareCryptoUsePolicy**: The hardware crypto usage policy.This global setting controls the hardware cryptography usage policy.

Supported Values:

|  |  |
| --- | --- |
| auto | Use hardware cryptography if available; otherwise, fall back to software-based cryptography (default). |
| enable | Always attempt to use hardware cryptography. If unavailable, exception will be thrown. |
| disable | Do not use hardware cryptography. |

**HttpUserAgent**: Specifies the user agent name to be used by all HTTP clients.This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

**HttpVersion**: The HTTP version to use in any inner HTTP client components created.Set this property to 1.0 or 1.1 to indicate the HTTP version that any internal HTTP clients should use.

**IgnoreExpiredMSCTLSigningCert**: Whether to tolerate the expired Windows Update signing certificate.It is not uncommon for Microsoft Windows Update Certificate Trust List to be signed with an expired Microsoft certificate. Setting this global property to true makes SBB ignore the expired factor and take the Trust List into account.

**ListDelimiter**: The delimiter character for multi-element lists.Allows to set the delimiter for any multi-entry values returned by the component as a string object, such as file lists. For most of the components, this property is set to a newline sequence.

**LogDestination**: Specifies the debug log destination.Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:

|  |  |  |
| --- | --- | --- |
| file |  | File |
| console |  | Console |
| systemlog |  | System Log (supported for Android only) |
| debugger |  | Debugger (supported for VCL for Windows and .Net) |

**LogDetails**: Specifies the debug log details to dump.Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:

|  |  |  |
| --- | --- | --- |
| time |  | Current time |
| level |  | Level |
| package |  | Package name |
| module |  | Module name |
| class |  | Class name |
| method |  | Method name |
| threadid |  | Thread Id |
| contenttype |  | Content type |
| content |  | Content |
| all |  | All details |

**LogFile**: Specifies the debug log filename.Use this property to provide a path to the log file.

**LogFilters**: Specifies the debug log filters.Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:

|  |  |  |
| --- | --- | --- |
| exclude-package |  | Exclude a package specified in the value |
| exclude-module |  | Exclude a module specified in the value |
| exclude-class |  | Exclude a class specified in the value |
| exclude-method |  | Exclude a method specified in the value |
| include-package |  | Include a package specified in the value |
| include-module |  | Include a module specified in the value |
| include-class |  | Include a class specified in the value |
| include-method |  | Include a method specified in the value |

**LogFlushMode**: Specifies the log flush mode.Use this property to set the log flush mode. The following values are defined:

|  |  |  |
| --- | --- | --- |
| none |  | No flush (caching only) |
| immediate |  | Immediate flush (real-time logging) |
| maxcount |  | Flush cached entries upon reaching LogMaxEventCount entries in the cache. |

**LogLevel**: Specifies the debug log level.Use this property to provide the desired debug log level.

Supported values are:

|  |  |  |
| --- | --- | --- |
| none |  | None (by default) |
| fatal |  | Severe errors that cause premature termination. |
| error |  | Other runtime errors or unexpected conditions. |
| warning |  | Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong". |
| info |  | Interesting runtime events (startup/shutdown). |
| debug |  | Detailed information on flow of through the system. |
| trace |  | More detailed information. |

**LogMaxEventCount**: Specifies the maximum number of events to cache before further action is taken.Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

**LogRotationMode**: Specifies the log rotation mode.Use this property to set the log rotation mode. The following values are defined:

|  |  |  |
| --- | --- | --- |
| none |  | No rotation |
| deleteolder |  | Delete older entries from the cache upon reaching LogMaxEventCount |
| keepolder |  | Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded) |

**MaxASN1BufferLength**: Specifies the maximal allowed length for ASN.1 primitive tag data.This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

**MaxASN1TreeDepth**: Specifies the maximal depth for processed ASN.1 trees.This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

**OCSPHashAlgorithm**: Specifies the hash algorithm to be used to identify certificates in OCSP requests.This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

**OldClientSideRSAFallback**: Specifies whether the SSH client should use a SHA1 fallback.Tells the SSH client to use a legacy ssh-rsa authentication even if the server indicates support for newer algorithms, such as rsa-sha-256. This is a backward-compatibility tweak.

**PKICache**: Specifies which PKI elements (certificates, CRLs, OCSP responses) should be cached.The PKICache setting specifies which Public Key Infrastructure (PKI) elements should be cached to optimize performance and reduce retrieval times. It supports comma-separated values to indicate the specific types of PKI data that should be cached.

Supported Values:

|  |  |
| --- | --- |
| certificate | Enables caching of certificates. |
| crl | Enables caching of Certificate Revocation Lists (CRLs). |
| ocsp | Enables caching of OCSP (Online Certificate Status Protocol) responses. |

Example (default value):

```text
PKICache=certificate,crl,ocsp
```

 In this example, the component caches certificates, CRLs, and OCSP responses.

**PKICachePath**: Specifies the file system path where cached PKI data is stored.The PKICachePath setting defines the file system path where cached PKI data (e.g., certificates, CRLs, OCSP responses and Trusted Lists) will be stored. This allows the system to persistently save and retrieve PKI cache data, even across application restarts.

The default value is an empty string - no cached PKI data is stored on disk.

Example:

```text
PKICachePath=C:\Temp\cache
```

 In this example, the cached PKI data is stored in the C:\Temp\cache directory.

**ProductVersion**: Returns the version of the SecureBlackbox library.This property returns the long version string of the SecureBlackbox library being used (major.minor.build.revision).

**ServerSSLDHKeyLength**: Sets the size of the TLS DHE key exchange group.Use this property to adjust the length, in bits, of the DHE prime to be used by the TLS server.

**StaticDNS**: Specifies whether static DNS rules should be used.Set this property to enable or disable static DNS rules for the class. Works only if *UseOwnDNSResolver* is set to *true*.

Supported values are:

|  |  |  |
| --- | --- | --- |
| none |  | No static DNS rules (default) |
| local |  | Local static DNS rules |
| global |  | Global static DNS rules |

**StaticIPAddress[domain]**: Gets or sets an IP address for the specified domain name.Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the *StaticDNS* value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are divided by the | (pipe) character.

**StaticIPAddresses**: Gets or sets all the static DNS rules.Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If *StaticDNS* of the class is set to "*local*", the property returns/restores the rules from/to the internal storage of the class. If *StaticDNS* of the class is set to "*global*", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

**Tag**: Allows to store any custom data.Use this config property to store any custom data.

**TLSSessionGroup**: Specifies the group name of TLS sessions to be used for session resumption.Use this property to limit the search of cached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

**TLSSessionLifetime**: Specifies lifetime in seconds of the cached TLS session.Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

**TLSSessionPurgeInterval**: Specifies how often the session cache should remove the expired TLS sessions.Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

**UseCRLObjectCaching**: Specifies whether reuse of loaded CRL objects is enabled.This setting enables or disables the caching of CRL objects. When set to true (the default value), the system checks if a CRL object is already loaded in memory before attempting to load a new instance. If the object is found, the existing instance is reused, and its reference count is incremented to track its usage. When the reference count reaches zero, indicating that no references to the object remain, the system will free the object from memory. This setting enhances performance by minimizing unnecessary object instantiation and promotes efficient memory management, particularly in scenarios where CRL objects are frequently used.

**UseInternalRandom**: Switches between SecureBlackbox-own and platform PRNGs.Allows to switch between internal/native PRNG implementation and the one provided by the platform.

**UseLegacyAdESValidation**: Enables legacy AdES validation mode.Use this setting to switch the AdES component to the validation approach that was used in SBB 2020/SBB 2022 (less attention to temporal details).

**UseOCSPResponseObjectCaching**: Specifies whether reuse of loaded OCSP response objects is enabled.This setting enables or disables the caching of OCSP response objects. When set to true (the default value), the system checks if a OCSP response object is already loaded in memory before attempting to load a new instance. If the object is found, the existing instance is reused, and its reference count is incremented to track its usage. When the reference count reaches zero, indicating that no references to the object remain, the system will free the object from memory. This setting enhances performance by minimizing unnecessary object instantiation and promotes efficient memory management, particularly in scenarios where OCSP response objects are frequently used.

**UseOwnDNSResolver**: Specifies whether the client components should use own DNS resolver.Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

**UseSharedSystemStorages**: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.Set this global property to false to make each validation run use its own copy of system certificate stores.

**UseSystemNativeSizeCalculation**: An internal CryptoAPI access tweak.This is an internal setting. Please do not use it unless instructed by the support team.

**UseSystemOAEPAndPSS**: Enforces or disables the use of system-driven RSA OAEP and PSS computations.This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

**UseSystemRandom**: Enables or disables the use of the OS PRNG.Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

**XMLRDNDescriptorName[OID]**: Defines an OID mapping to descriptor names for the certificate's IssuerRDN or SubjectRDN.This property defines custom mappings between Object Identifiers (OIDs) and descriptor names. This mapping specifies how the certificate's issuer and subject information (ds:IssuerRDN and ds:SubjectRDN elements respectively) are represented in XML signatures.

The property accepts comma-separated values where the first descriptor name is used when the OID is mapped, and subsequent values act as aliases for parsing.

Syntax:

```text
Config("XMLRDNDescriptorName[OID]=PrimaryName,Alias1,Alias2");
```

Where:

OID: The Object Identifier from the certificate's IssuerRDN or SubjectRDN that you want to map.

PrimaryName: The main descriptor name used in the XML signature when the OID is encountered.

Alias1, Alias2, ...: Optional alternative names recognized during parsing.

Usage Examples:

Map OID 2.5.4.5 to SERIALNUMBER:

```text
Config("XMLRDNDescriptorName[2.5.4.5]=SERIALNUMBER");
```

Map OID 1.2.840.113549.1.9.1 to E, with aliases EMAIL and EMAILADDRESS:

```text
Config("XMLRDNDescriptorName[1.2.840.113549.1.9.1]=E,EMAIL,EMAILADDRESS");
```

**XMLRDNDescriptorPriority[OID]**: Specifies the priority of descriptor names associated with a specific OID.This property specifies the priority of descriptor names associated with a specific OID that allows to reorder descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during signing.

**XMLRDNDescriptorReverseOrder**: Specifies whether to reverse the order of descriptors in RDN.Specifies whether to reverse the order of descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during XML signing. By default, this property is set to true (as specified in RFC 2253, 2.1).

**XMLRDNDescriptorSeparator**: Specifies the separator used between descriptors in RDN.Specifies the separator used between descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during XML signing. By default, this property is set to ", " value.

# MessageCompressor Errors

### MessageCompressor Errors

|  |  |
| --- | --- |
| 1048577 | Invalid parameter ([SB_ERROR_INVALID_PARAMETER](constants.md#const_SBERRORINVALIDPARAMETER)) |
| 1048578 | Invalid configuration ([SB_ERROR_INVALID_SETUP](constants.md#const_SBERRORINVALIDSETUP)) |
| 1048579 | Invalid state ([SB_ERROR_INVALID_STATE](constants.md#const_SBERRORINVALIDSTATE)) |
| 1048580 | Invalid value ([SB_ERROR_INVALID_VALUE](constants.md#const_SBERRORINVALIDVALUE)) |
| 1048581 | Private key not found ([SB_ERROR_NO_PRIVATE_KEY](constants.md#const_SBERRORNOPRIVATEKEY)) |
| 1048582 | Cancelled by the user ([SB_ERROR_CANCELLED_BY_USER](constants.md#const_SBERRORCANCELLEDBYUSER)) |
| 1048583 | The file was not found ([SB_ERROR_NO_SUCH_FILE](constants.md#const_SBERRORNOSUCHFILE)) |
| 1048584 | Unsupported feature or operation ([SB_ERROR_UNSUPPORTED_FEATURE](constants.md#const_SBERRORUNSUPPORTEDFEATURE)) |
| 1048585 | General error ([SB_ERROR_GENERAL_ERROR](constants.md#const_SBERRORGENERALERROR)) |