PTechGiftCard Errors

432   Invalid Index
501   Property length is invalid
504   Luhn digit check failed.
505   Card date invalid.
506   Card expired.
511   Property is set with invalid data.
517   Response length mismatch.
518   LRC check failed.
519   Corrupt response.
545   Error found in token data
546   Missing property for current method call.
593   Verification of post data failed: Invalid mix of properties for the current method call.

Paymentech Server Errors:

The following is a list of error codes which may be returned by the Paymentech Server. In the case of a server-side error condition, the ResponseCode property will contain "E", the error code will be contained in the ResponseApprovalCode property, and the description in ResponseText

Paymentech Issuer Errors


ResponseApprovalCode	ResponseText	Description
200	Auth Declined	Cardholder's bank did not approve transaction.
201	Call Voice Oper	Authorizer needs more information for approval.
202	Hold - Call	Card issuer does not want that card used. Call for further instructions.
203	Call Voice Oper	Authorizer didn't respond within allotted time.
204	Invalid Card No	Account #/mag stripe is invalid.
205	Invalid Exp. Date	Expiration date is either incorrect format or prior to today.
206	Invalid ICA No	Invalid International Control Account number.
207	Invalid ABA No	Invalid American Banking Association number.
208	Invalid PIN No	The Personal ID Number for a debit transaction is incorrect.
209	Invalid Bank MID	The Bank Merchant ID is incorrect.
210	Invalid Term No	The merchant ID is not valid or active.
211	Invalid Amount	Amount is either: equal to 0, has no decimal, has decimal in wrong place, or has multiple decimals.
213	Invalid Tran Fmt	The transaction format isn't valid, typically invalid SIC code
214	Call Voice Oper	Authorization center cannot be reached.
215	Lost/Stolen Card	Card has been reported lost or stolen.
216	Invalid PIN	Personal ID code is incorrect.
217	Over Credit Flr	Amount requested exceeds credit limit.
218	Request Denied	Transaction is not valid for this authorizer.
220	Not Online to XX	Fatal communications error.
221	Auth Down-Retry	Debit authorizer temporarily unavailable.
222	Auth Declined	Vehicle not found in positive file.
223	Invalid Pin No	Driver # not found in positive file.
224	Auth Declined	Card is on private label negative file.
225	Card Not Allowed	Merchant does not accept this card.
226	PL Setup Reqd	Merchant not set up for Private Label.
227	BIN Not Allowed	Merchant cannot accept this Private Label BIN range.
228	Card Not Allowed	Merchant cannot accept this card.
229	Inv Merc Rstrct Code	Restriction code field contains invalid data.
230	Prod Restricted	Merchant attempted a product code not permitted by this merchant.
231	Prod Not On File	Merchant attempted a product code that does not exist on host.
232	Auth Declined	Invalid card type for Prior Auth sale.
233	Auth Declined	Terminal Type not supported.
234	Auth Declined	T&E card used for Sale when merchant only allows Auth Only.
235	Request Denied	Prior Auth selected with no Auth code provided.
238	Invalid Driver Number	The Driver Number entered is invalid.
247	PIN Not Selected	EBT recipient has not selected a PIN for this card.
248	Unmatch Vch Info	Voucher submitted does not match one previously issued.
248	CVC2/CID ERROR	CVC2 or CID entered was not valid for the card number.
249	Tran Not Defined	This type of transaction is not allowed for this type of card.
257	Block Act Not Alwd	The merchant.is not allowed to process Stored Value Block Activations
258	Incorrect Act Amt	The activation amount requested does not match the predenominated amount for the card.
292	Auth Down - Retry	Authorizer is not responding.
293	Auth Busy - Retry	Authorizer not available at this time.
294	Auth Busy - Retry	Authorizer not available at this time.
297	Auth Error - Retry	Authorizer not available at this time.
298	Err - Pls Retry	Debit authorizer experienced an error.
299	Err - Pls Retry	Debit authorizer experienced an error.

Paymentech Format Errors


ResponseApprovalCode	ResponseText	Description
300	Invalid Term ID	The length of the merchant ID is incorrect or contains invalid data.
301	Invalid Function	Tran code is incorrect or wrong length.
302	Invalid Card	Mag stripe contains invalid data or account # is greater than 19 digits
303	Invalid Exp. Date	Card has expired, month was not 01-12 or year was not 00-99.
304	Invalid Action Code	Action code is longer than 1 digit.
305	Amt Entry Error	Amount less than .01 or greater than 99999.99 or contained non- numeric data.
306	Invalid PIN	Incorrect PIN block length.
307	Invalid Card	Invalid card type or account number.
308	Auth # Not Entered	Auth code was not entered on a Prior Auth, Incremental or Rev.
309	Invalid Down Pay Ind	Insurance down payment indicator is invalid.
310	Policy # Wrong Len	Insurance policy number is incorrect length.
311	Invalid Ind Code	Industry type must be RE or DM.
312	Invalid Function	Tran code is invalid or contains alpha data.
313	Entry Mode Invalid	POS Entry mode is less than 01 or greater than 04.
314	Invalid Industry Data	The Industry Specific field contains invalid data.
315	Inv Fleet Data	The Fleet Card field contains invalid data.
316	Invalid Sys Info	The System Information field contains invalid data.
317	Invalid Format	Payment Service indicator or Transaction ID is invalid.
318	Inv Transaction Class	Transaction class not "F" for financial transaction.
319	Inv PIN Capability	Pin capability code field contains invalid data.
320	Inv/Missing Retr Ref	Retrieval Reference # is missing or contains alpha data.
321	Inv MSDI	Market Specific Data field contains invalid data.
322	Invalid Duration	Market specific data field Duration is 00, blank or missing.
323	Inv Pref Cust Ind	Preferred Customer indicator contains invalid data.
324	Inv MO/TO Number	Mail/Telephone Order number is invalid (InvoiceNumber must have a value).
325	Inv Sale/Chg Des/Folio	Hotel Sale Code, Charge Descriptor or Folio contains invalid data.
326	Inv Mult Clr Seq No	Multiple Clearing sequence number is invalid.
327	Inv Purch Card Data	Purchasing card field contains invalid data.
328	Inv Input/Use VRU	Insurance transaction not from VRU.
329	Invalid EC Data 329	Invalid Electronic Commerce Data.
330	INV Function or Multiple FS or Unknown TKN	Indicates system problem, notify Paymentech Network Services or Multiple field separators received without required data or A token of unknown definition was received
331	INV TKN Value	Invalid token value was received.
332	CVD Data Error	Error with the cardholder verification data received; invalid value or not allowable for this card for this transaction.
333	TKN Data Error	Indicates system problem, notify Paymentech Network Services.
359	Invalid Sequence Number	The SequenceNumber must be a number between 0 and 2400.

Paymentech Host / Setup Errors


ResponseApprovalCode	ResponseText	Description
400	Invalid Term ID	Merchant ID not found in merchant file.
401	Invalid Term ID	Merchant ID not found in terminal file.
402	Term Not Active	Active flag for merchant set to "N".
403	Invalid Act Code	Merchant not set up for cash advance function.
404	Void Not Allowed	The transaction requested for voiding is not an EFT transaction.
405	Ref Num Not Found	Transaction requested for reversal not found.
406	Proc Error 7	The host can't clear all transaction records for the requested Batch Release.
407	Too Many Batches	There are 999 open batches for this merchant.
408	Release Batch	Current batch has 999 records. Release batch before continuing.
409	Invalid Function	Debit transaction requested but debit flag is set to "N".
410	Invalid Term ID	The Terminal ID portion of the merchant ID is incorrect.
411	Invalid Term ID	The maximum retries for this merchant have been exceeded.
412	Proc Error 13	Unable to read reference number file.
413	Proc Error 14	413
414	Proc Error 15	414
415	Invalid Function	415
416	Invalid Function	Merchant is Authorization Only and a debit record was sent.
417	Invalid Function	Private label flag is "N" but a private label account number was sent.
418	Please Try Again	Incorrect debit working key.
419	Invalid Function	Manually entered transactions are not allowed for this terminal ID.
420	Amount Too Large	Maximum sale amount exceeded.
421	Amount Too Large	Maximum return amount exceeded.
422	Invalid Term ID	Host couldn't read terminal file within specified time.
423	Proc Error 24	Host couldn't read reference number file within specified time.
424	Invalid Term ID	Transaction open flag has been set to "Y" within prior 3 minutes.
425	Invalid Function	Cash management not allowed for this merchant ID.
426	Rev Not Allowed	Host found no batch number matching the one sent.
427	Rev Not Allowed	Host found no transactions meeting the specifications sent.
428	Dscv Not Allowed	Merchant not set up for Discover transactions.
429	Rev Not Allowed	The batch containing the transaction to void has been released.
430	Dscv Not Allowed	Merchant not set up for Discover.
431	DC Not Allowed	Merchant not set up for Diners Club.
432	CB Not Allowed	Merchant not set up for Carte Blanche.
433	Invalid Key	No AMEX subscriber number, process control ID or product code set up
434	Invalid Key	Future use.
435	Failed-Plz Call	Debit transaction being sent to an authorizer not set up on host file.
436	Failed-Plz Call	Debit security key does not exist on the security management file.
437	Failed-Plz Call	Failure occurred during encryption/decryption of PIN.
438	Failed-Plz Call	Error occurred while generating a debit working key.
439	Failed-Plz Call	The DB (debit) sponsor institution on the merchant file is not set up on sponsor file.
440	Failed-Plz Call	The network set up on the sponsoring bank file for this institution is not set up on the host's network file.
441	Failed-Plz Call	The host is unable to communicate with decryption device.
442	JCB Not Allowed	JCB CD flag on merchant record not set up for JCB transactions.
443	JCB Not Allowed	JCB subscriber number not set up for JCB transactions.
444	Bank Not On File	Debit BIN not set up for this merchant in routing table.
445	No Sponsor Inst	No valid sponsorship was found on Merchant record.
446	Failed Plz Call	Future use.
447	WX Not Allowed	Merchant not set up to accept WEX.
448	Amount Too Large	Amount exceeds maximum limit.
449	Reenter Odometer	Odometer was 000000 or contained non-numeric data.
450	Duplicate Tran	No ACK reversal was followed by a duplicate request
451	Tran Not Allowed	Requested transaction type is not allowed for this card/merchant.
452	Bat Already Rels	Batch has already been released.
453	Invalid Rtng Ind	Invalid Routing Indicator field.
454	AX Not Allowed	AMEX not allowed.
999	Invalid Merchant	Merchant number not on file.

Paymentech Debit / EBT Specific Errors


ResponseApprovalCode	ResponseText	Description
602	Call Voice Op	Auth center cannot be reached.
692	Auth Down-Retry	Debit authorizer temporarily unavailable.
693	Auth Busy-Retry	Queue for debit authorizer too long.
694	Auth Busy-Retry	Debit authorizer not responding in time.

Paymentech Batch Management Errors (use the ErrorCode configuration setting to retrieve this information from the PTechHostSettle class.


ErrorCode	ResponseText	Description
105	Invalid Term ID	Merchant ID on a Batch Inquiry or Release is incorrect.
106	Term Not Active	Active flag for the merchant ID is set to N.
107	No Transactions	A Batch Inquiry or Release was requested but no open batch exists.
108	Bat Already Rels	A second batch release was attempted.
109	Batch Not Found	Requested batch does not exist.

The class may also return one of the following error codes, which are inherited from other classes.

HTTP Errors

118   Firewall Error. Error description contains detailed message.
143   Busy executing current method.
151   HTTP protocol error. The error message has the server response.
152   No server specified in URL
153   Specified URLScheme is invalid.
155   Range operation is not supported by server.
156   Invalid cookie index (out of range).
301   Interrupted.
302   Can't open AttachedFile.

The class may also return one of the following error codes, which are inherited from other classes.

IPPort Errors

100   You cannot change the RemotePort at this time. A connection is in progress.
101   You cannot change the RemoteHost (Server) at this time. A connection is in progress.
102   The RemoteHost address is invalid (0.0.0.0).
104   Already connected. If you want to reconnect, close the current connection first.
106   You cannot change the LocalPort at this time. A connection is in progress.
107   You cannot change the LocalHost at this time. A connection is in progress.
112   You cannot change MaxLineLength at this time. A connection is in progress.
116   RemotePort cannot be zero. Please specify a valid service port number.
117   Cannot change UseConnection option while the class is Active.
135   Operation would block.
201   Timeout.
211   Action impossible in control's present state.
212   Action impossible while not connected.
213   Action impossible while listening.
303   Could not open file.
434   Unable to convert string to selected CodePage
1105   Already connecting. If you want to reconnect, close the current connection first.
1117   You need to connect first.
1119   You cannot change the LocalHost at this time. A connection is in progress.
1120   Connection dropped by remote host.

SSL Errors

270   Cannot load specified security library.
271   Cannot open certificate store.
272   Cannot find specified certificate.
273   Cannot acquire security credentials.
274   Cannot find certificate chain.
275   Cannot verify certificate chain.
276   Error during handshake.
280   Error verifying certificate.
281   Could not find client certificate.
282   Could not find server certificate.
283   Error encrypting data.
284   Error decrypting data.

TCP/IP Errors

10004   [10004] Interrupted system call.
10009   [10009] Bad file number.
10013   [10013] Access denied.
10014   [10014] Bad address.
10022   [10022] Invalid argument.
10024   [10024] Too many open files.
10035   [10035] Operation would block.
10036   [10036] Operation now in progress.
10037   [10037] Operation already in progress.
10038   [10038] Socket operation on non-socket.
10039   [10039] Destination address required.
10040   [10040] Message too long.
10041   [10041] Protocol wrong type for socket.
10042   [10042] Bad protocol option.
10043   [10043] Protocol not supported.
10044   [10044] Socket type not supported.
10045   [10045] Operation not supported on socket.
10046   [10046] Protocol family not supported.
10047   [10047] Address family not supported by protocol family.
10048   [10048] Address already in use.
10049   [10049] Can't assign requested address.
10050   [10050] Network is down.
10051   [10051] Network is unreachable.
10052   [10052] Net dropped connection or reset.
10053   [10053] Software caused connection abort.
10054   [10054] Connection reset by peer.
10055   [10055] No buffer space available.
10056   [10056] Socket is already connected.
10057   [10057] Socket is not connected.
10058   [10058] Can't send after socket shutdown.
10059   [10059] Too many references, can't splice.
10060   [10060] Connection timed out.
10061   [10061] Connection refused.
10062   [10062] Too many levels of symbolic links.
10063   [10063] File name too long.
10064   [10064] Host is down.
10065   [10065] No route to host.
10066   [10066] Directory not empty
10067   [10067] Too many processes.
10068   [10068] Too many users.
10069   [10069] Disc Quota Exceeded.
10070   [10070] Stale NFS file handle.
10071   [10071] Too many levels of remote in path.
10091   [10091] Network subsystem is unavailable.
10092   [10092] WINSOCK DLL Version out of range.
10093   [10093] Winsock not loaded yet.
11001   [11001] Host not found.
11002   [11002] Non-authoritative 'Host not found' (try again or check DNS setup).
11003   [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP.
11004   [11004] Valid name, no data record (check DNS setup).