FedExMgr Component
Properties Methods Events Configuration Settings Errors
Provides a way to subscribe a provider with FedEx Web Services and to register a CSP user with FedEx.
Syntax
TibxFedExMgr
Remarks
With this component you can perform the following:
- Subscribe with FedEx to obtain a unique meter number specific to the FedEx customer's account number.
- Register a CSP user and obtain a CSP end-user specific key and password.
To subscribe a customer's FedEx account number for FedEx Web Services, you will have to send a subscription request by calling the Subscribe method. This is a one-time only request. A unique FedExMeterNumber specific to the customer's FedEx account number will be returned to the client. This FedExMeterNumber returned in the response, should be used in all subsequent requests sent to FedEx Web Services as part of the user authentication. The response will also include which FedEx Web services are authorized (RegisteredServices) for that particular FedEx Account.
A registration process is applicable to CSP developers and users only. To register a CSP user, use the RegisterCSPUser method. Via this method, the descriptive data is sent to FedEx by the customer to obtain the end user authentication credentials required to use FedEx Web Services.
This is typically a one-time only request for each customer. A unique key and password will be returned to the client in the reply. This end user key and password (FedExCSPUserKey and FedExCSPUserPassword) inherits the services enabled for the CSP credentials and must be passed in all subsequent requests sent to FedEx Web Services.
To use this component, you must have a valid FedEx FedExAccountNumber.
The restrictions on the allowed property values are listed separately under each control property description. If the user enters more than the allowed number of characters, an error will not be generated. The control will simply pass in the characters up to the maximum amount allowed and disregard the rest. This is important since the resulting value could prevent a correct response.
Property List
The following is the full list of the properties of the component with short descriptions. Click on the links for further details.
| FedExAccountNumber | Account number for logging in to the FedEx Server . |
| FedExCSPProductId | Identifies the CSP product. |
| FedExCSPProductVersion | Identifies the CSP product version. |
| FedExCSPUserKey | CSP end user key. |
| FedExCSPUserPassword | CSP end user password. |
| FedExDeveloperKey | Identifying part of the authentication key used for the sender's identity. |
| FedExMeterNumber | Meter number to use for submitting requests to the FedEx Server . |
| FedExPassword | Secret part of authentication key used for the sender's identity. |
| FedExServer | URL for the FedEx Server where the requests are sent. |
| FirewallAutoDetect | This property tells the component whether or not to automatically detect and use firewall system settings, if available. |
| FirewallType | This property determines the type of firewall to connect through. |
| FirewallHost | This property contains the name or IP address of firewall (optional). |
| FirewallPassword | This property contains a password if authentication is to be used when connecting through the firewall. |
| FirewallPort | This property contains the TCP port for the firewall Host . |
| FirewallUser | This property contains a user name if authentication is to be used connecting through a firewall. |
| ProxyAuthScheme | This property is used to tell the component which type of authorization to perform when connecting to the proxy. |
| ProxyAutoDetect | This property tells the component whether or not to automatically detect and use proxy system settings, if available. |
| ProxyPassword | This property contains a password if authentication is to be used for the proxy. |
| ProxyPort | This property contains the TCP port for the proxy Server (default 80). |
| ProxyServer | If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified. |
| ProxySSL | This property determines when to use SSL for the connection to the proxy. |
| ProxyUser | This property contains a user name, if authentication is to be used for the proxy. |
| RegisteredServices | Identifies the FedEx shipping service type(s) that the caller has been registered to use. |
| SenderAddress1 | Street name. |
| SenderAddress2 | A specific detail on the address (such as building, suite, apartment, floor number etc. |
| SenderCity | Name of city, town, etc. |
| SenderCountryCode | Country code. |
| SenderState | State or province code. |
| SenderZipCode | Postal code. |
| SenderCompany | Identifies the contact person's company name. |
| SenderEmail | Identifies the contact person's email address. |
| SenderFax | Recipient's fax number. |
| SenderFirstName | Sender's first name. |
| SenderLastName | Person's last name. |
| SenderMiddleInitial | Middle initial. |
| SenderPhone | Identifies the contact person's phone number. |
| SSLAcceptServerCertEncoded | The certificate (PEM/base64 encoded). |
| SSLCertEncoded | The certificate (PEM/base64 encoded). |
| SSLCertStore | The name of the certificate store for the client certificate. |
| SSLCertStorePassword | If the certificate store is of a type that requires a password, this property is used to specify that password in order to open the certificate store. |
| SSLCertStoreType | The type of certificate store for this certificate. |
| SSLCertSubject | The subject of the certificate used for client authentication. |
| SSLServerCertEncoded | The certificate (PEM/base64 encoded). |
| Timeout | A timeout for the component. |
Method List
The following is the full list of the methods of the component with short descriptions. Click on the links for further details.
| Config | Sets or retrieves a configuration setting . |
| RegisterCSPUser | Registers a CSP User. |
| Subscribe | Requests the unique meter number specific to the FedEx customer's account number. |
Event List
The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.
| Error | Information about errors during data delivery. |
| Notification | Notification returned by the server upon successful request (if applicable). |
| SSLServerAuthentication | Fired after the server presents its certificate to the client. |
| SSLStatus | Shows the progress of the secure connection. |
Configuration Settings
The following is a list of configuration settings for the component with short descriptions. Click on the links for further details.
| RawRequest | Contains the complete request sent to the Server. |
| RawResponse | Contains the complete response returned by the Server. |
| XPath | Used to retrieve data at any place within the response. |
| Warning | Warning message returned by the server. |
| CSPUserKey | CSP end user key. |
| CSPUserPassword | CSP end user password. |
| CSPProductId | Identifies the CSP product. |
| CSPProductVersion | Identifies the CSP product version. |
| UseSOAP | Determines if the FedEx SOAP web services are used instead of the FedEx XML web services. |
| CustomContent | Defines any custom content to print on the label. |
| CSPSolutionId | A unique identifier assigned to CSPs by FedEx. |
| AcceptEncoding | Used to tell the server which types of content encodings the client supports. |
| AllowHTTPCompression | This property enables HTTP compression for receiving data. |
| AllowIdenticalRedirectURL | Allow redirects to the same URL. |
| Append | Whether to append data to LocalFile. |
| Authorization | The Authorization string to be sent to the server. |
| BytesTransferred | Contains the number of bytes transferred in the response data. |
| EncodeURL | If set to true the URL will be encoded by the component. |
| FollowRedirects | Determines what happens when the server issues a redirect. |
| GetOn302Redirect | If set to true the component will perform a GET on the new location. |
| HTTPVersion | The version of HTTP used by the component. |
| IfModifiedSince | A date determining the maximum age of the desired document. |
| KeepAlive | Determines whether the HTTP connection is closed after completion of the request. |
| MaxRedirectAttempts | Limits the number of redirects that are followed in a request. |
| OtherHeaders | Other headers as determined by the user (optional). |
| ProxyAuthorization | The authorization string to be sent to the proxy server. |
| ProxyAuthScheme | The authorization scheme to be used for the proxy. |
| ProxyPassword | A password if authentication is to be used for the proxy. |
| ProxyPort | Port for the proxy server (default 80). |
| ProxyServer | Name or IP address of a proxy server (optional). |
| ProxyUser | A user name if authentication is to be used for the proxy. |
| TransferredDataLimit | The maximum number of incoming bytes to be stored by the component. |
| TransferredHeaders | The full set of headers as received from the server. |
| UseChunkedEncoding | Enables or Disables HTTP chunked encoding for transfers. |
| ChunkSize | Specifies the chunk size in bytes when using chunked encoding. |
| UserAgent | Information about the user agent (browser). |
| KerberosSPN | The Service Principal Name for the Kerberos Domain Controller. |
| ConnectionTimeout | Sets a separate timeout value for establishing a connection. |
| FirewallAutoDetect | Tells the component whether or not to automatically detect and use firewall system settings, if available. |
| FirewallHost | Name or IP address of firewall (optional). |
| FirewallPassword | Password to be used if authentication is to be used when connecting through the firewall. |
| FirewallPort | The TCP port for the FirewallHost;. |
| FirewallType | Determines the type of firewall to connect through. |
| FirewallUser | A user name if authentication is to be used connecting through a firewall. |
| KeepAliveTime | The inactivity time in milliseconds before a TCP keep-alive packet is sent. |
| KeepAliveInterval | The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received. |
| Linger | When set to True, connections are terminated gracefully. |
| LingerTime | Time in seconds to have the connection linger. |
| LocalHost | The name of the local host through which connections are initiated or accepted. |
| LocalPort | The TCP port in the local host where the component binds. |
| MaxLineLength | The maximum amount of data to accumulate when no EOL is found. |
| MaxTransferRate | The transfer rate limit in bytes per second. |
| RecordLength | The length of received data records. |
| TCPKeepAlive | Determines whether or not the keep alive socket option is enabled. |
| UseIPv6 | Whether to use IPv6. |
| TcpNoDelay | Whether or not to delay when sending packets. |
| TLS12SignatureAlgorithms | Defines the allowed TLS 1.2 signature algorithms when UseManagedSecurityAPI is True. |
| ReuseSSLSession | Determines if the SSL session is reused. |
| SSLCipherStrength | The minimum cipher strength used for bulk encryption. |
| SSLEnabledProtocols | Used to enable/disable the supported security protocols. |
| SSLProvider | The name of the security provider to use. |
| SSLSecurityFlags | Flags that control certificate verification. |
| OpenSSLCADir | The path to a directory containing CA certificates. |
| OpenSSLCAFile | Name of the file containing the list of CA's trusted by your application. |
| OpenSSLCipherList | A string that controls the ciphers to be used by SSL. |
| OpenSSLPrngSeedData | The data to seed the pseudo random number generator (PRNG). |
| AbsoluteTimeout | Determines whether timeouts are inactivity timeouts or absolute timeouts. |
| FirewallData | Used to send extra data to the firewall. |
| InBufferSize | The size in bytes of the incoming queue of the socket. |
| OutBufferSize | The size in bytes of the outgoing queue of the socket. |
| CodePage | The system code page used for Unicode to Multibyte translations. |