FTP Task

The FTP Component adds SSL-enabled FTP send and receive capabilities to your SSIS Package.

Remarks

The FTP Task adds a complete FTP client to your SSIS Package and enables it with plaintext or SSL-secured file download and upload capability.

FTP Receive Task

A single property must be set: FTPServer. You may also set an FTPPort if the server is not set to the default protocol port. If your FTP server requires authentication, you should set the User, Password and/or Account properties. If you wish to enable SSL, you can turn it on by setting an appropriate SSLCert and SSLStartMode as well as supplying an SSLAcceptServerCert.

The task will connect to the FTP server and list the directory specified by RemotePath. All files that match the FileMask will be downloaded and submitted to the SSIS Package as individual SSIS ADO tables. In order to guarantee that files are not downloaded multiple times, you may set the DeleteMode. If you wish to do any other PRE- or POST-GET operation, you can specify them as scripts through the BeforeGet and AfterGet properties, respectively.

FTP Send Task

Two properties must be set: FTPServer and a RemoteFile. If your server does not operate on the default FTP port, you will need to specify the correct port via FTPPort. For servers that do not allow anonymous uploads, you may also need to set User, Password, and/or Account. To enable SSL, you should select a client SSLCert and a SSLAcceptServerCert as well as an SSLStartMode.

The task will connect to the FTP server whenever it has a message to send. The task will attempt to upload to the specified RemotePath. In order to prevent parallel processing by another application before your upload is complete, you may need to set a temporary extension via TemporaryUploadExtension. If Overwrite is set to True, the task will delete or overwrite remote files as necessary to complete the operation.

If you wish to do any other PRE- or POST-PUT operation, you can specify them as scripts through the BeforePut and AfterPut properties, respectively.

Receiver Property List

The following is the full list of the properties of the receiver task with short descriptions. Click on the links for further details.


AfterConnect	A set of FTP commands to be executed immediately after connecting to the FTPServer .
AfterGet	A set of FTP commands to be executed after the GET.
BeforeGet	A set of FTP commands to be executed before the GET.
Delete	Controls if the remote file is deleted after download.
DirList	String denoting the name of the variable which contains the last directory listing entries.
FileMask	Indicates the type of files to download from the FTP server.
Firewall	A set of properties related to firewall access.
FTPPort	The port for the FTP service (default is 21).
FTPServer	The domain name or IP address of the FTP server.
LocalDirectory	The directory on the local machine to write downloaded files to.
LogFile	The file to write logging information to at runtime.
LogMode	What information gets logged during component execution.
Operation	The operation which will be executed by the FTP task.
Other	Defines a set of configuration settings to be used by the component.
Overwrite	Whether or not the component should overwrite files during transfer.
Passive	Controls whether to direct the server into passive mode. Recommended if behind a firewall.
Password	The password for login.
PersistentConnection	Instructs the component whether to keep the connection to the server open.
RemotePath	The current path in the FTP server.
RuntimeLicense	Specifies the component runtime license key.
SSLAcceptServerCert	Instructs the component to unconditionally accept the server certificate that matches the supplied certificate.
SSLAcceptServerCertAcceptAny	Tells the component to accept any server certificate.
SSLCert	The certificate to use for client authentication during the SSL handshake.
SSLStartMode	Determines how the component starts the SSL negotiation.
Timeout	A timeout for the component.
TransferMode	The transfer mode (ASCII or Binary). If the value is 0 (default), the initial server mode will be used.
User	The user id for login.
UseSimpleDirList	Instructs the component to issue the NLST command instead of LIST.

Sender Property List

The following is the full list of the properties of the sender task with short descriptions. Click on the links for further details.


AfterConnect	A set of FTP commands to be executed immediately after connecting to the FTPServer .
AfterPut	A set of FTP commands to be executed after the PUT.
Append	Whether or not the component should append data to the RemoteFile .
BeforePut	A set of FTP commands to be executed before the PUT.
Firewall	A set of properties related to firewall access.
FTPPort	The port for the FTP service (default is 21).
FTPServer	The domain name or IP address of the FTP server.
LocalFile	The path to a local file for upload.
LogFile	The file to write logging information to at runtime.
LogMode	What information gets logged during component execution.
Other	Defines a set of configuration settings to be used by the component.
Overwrite	Whether or not the component should overwrite files during transfer.
Passive	Controls whether to direct the server into passive mode. Recommended if behind a firewall.
Password	The password for login.
PersistentConnection	Instructs the component whether to keep the connection to the server open.
RemoteFile	The name of the destination file on the FTP server for uploading.
RemotePath	The current path in the FTP server.
RemoteTempPath	A temporary directory on the server to store files before moving them to RemotePath .
RuntimeLicense	Specifies the component runtime license key.
SSLAcceptServerCert	Instructs the component to unconditionally accept the server certificate that matches the supplied certificate.
SSLAcceptServerCertAcceptAny	Tells the component to accept any server certificate.
SSLCert	The certificate to use for client authentication during the SSL handshake.
SSLStartMode	Determines how the component starts the SSL negotiation.
Timeout	A timeout for the component.
TransferMode	The transfer mode (ASCII or Binary). If the value is 0 (default), the initial server mode will be used.
User	The user id for login.
UseSimpleDirList	Instructs the component to issue the NLST command instead of LIST.

Config Settings

The following is a list of config settings for the task with short descriptions. Click on the links for further details.


Account	The user account to login with.
AutoSelectDataIP	Automatically select the data connection IP.
CheckFileExists	Whether to check if the remote file exists before uploading.
DirEntryPattern	Allows the use of regular expressions to parse non-standard directory entry formats.
DownloadCacheFile	When set, only new files will be downloaded from the server.
DownloadCacheFileDuration	The number of minutes that a file name will remain in the download cache.
EnableFileDetailsComparison	Whether the receive component should consider metadata differences when deciding whether to download a file again.
ExcludeMask	Instructs the component to exclude some files when downloading.
LocalFile	The name of the LocalFile to which the remote file will be saved.
Logoff	Whether or not to logoff from the server after execution.
MaxFilesPerPollingInterval	The maximum number of files that will be downloaded from the server during a single poll.
ModeZCompressionLevel	Used to specify the level of compression used.
PortRange	Allows the specification of a port range the component listens to.
RecursiveDownload	When true, all files and folders in the RemotePath are downloaded recursively.
RecursiveUpload	When true, all files and folders in the folder specified in LocalFile are uploaded recursively.
RenameMode	The condition under which RenameTo is used.
RenameTo	A filename to which RemoteFile will be renamed.
ReusePISSLSessionInDI	Whether the PI SSL session will be reused for the DI connection.
ReuseSSLSessionInDI	Whether the SSL session will be reused for the DI connection.
TemporaryDownloadExtension	An extension to be appended during download.
TemporaryUploadExtension	An extension to be appended during upload.
UseClearCommandChannel	Allows for the Clear Command Channel (CCC) command.
UseClearDataChannel	Allows for the PROT C command.
UseEPSV	Allows extended passive mode.
UseFSwitch	Specifies whether or not the -F parameter is used when listing directory contents.
UseMLSD	Uses listings for machine processing.
UseModeZ	Allows compression to be used when transferring data.
UseProtWhenImplicit	Sends PROT P to the server.
UseRemoteHostAddressForPassive	Instructs the component to use the FTPServer in passive mode.
ReuseSSLSession	Determines if the SSL session is reused.
SSLCipherStrength	The minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuites	The cipher suite to be used in an SSL negotiation.
SSLEnabledProtocols	Used to enable/disable the supported security protocols.
SSLIncludeCertChain	Whether the entire certificate chain is included in the SSLServerAuthentication event.
SSLSecurityFlags	Flags that control certificate verification.
TLS12SignatureAlgorithms	Defines the allowed TLS 1.2 signature algorithms when UseInternalSecurityAPI is True.
TLS12SupportedGroups	The supported groups for ECC.
TLS13KeyShareGroups	The groups for which to pregenerate key shares.
TLS13SignatureAlgorithms	The allowed certificate signature algorithms.
TLS13SupportedGroups	The supported groups for (EC)DHE key exchange.
AbsoluteTimeout	Determines whether timeouts are inactivity timeouts or absolute timeouts.
LocalHost	The name of the local host or user-assigned IP interface through which connections are initiated or accepted.
TcpNoDelay	Whether or not to delay when sending packets.
UseInternalSecurityAPI	Tells the component whether or not to use the system security libraries or an internal implementation.

AfterConnect Property (FTP Task)

A set of FTP commands to be executed immediately after connecting to the FTPServer .

Data Type

String

Default Value

Remarks

AfterConnect is a script that is executed immediately following a successful connection.

The script may contain any number of standard FTP commands.

Each line in the script is treated as a single command. By default, if the task encounters any errors while executing a command, it will log the error message and will continue to process the script. This behavior can be turned off by inserting "ONERROR FAIL" at any point in the script, which will cause the script to terminate on error but will not interrupt the normal operation of the task. The default behavior can be restored at any point in the script by inserting the line "ONERROR RESUME".

Valid additional scripting commands are listed below:


cd Path	Change the remote directory to the specified path.
del Filename	Delete the specified file from the remote server.
mkdir Directory	Create the specified remote directory on the server.
rn Filename NewFilename	Rename the remote file specified by Filename to the NewFilename.
move Filename NewFilename	Move the remote file located at Filename to the NewFilename.
rm Filename	Remove the specified file from the remote server.
rmdir Directory	Remove the remote directory from the server.
touch Filename	Create the specified file on the server.

AfterGet Property (FTP Task)

A set of FTP commands to be executed after the GET.

Data Type

String

Default Value

Remarks

AfterGet is a script that is executed immediately following each successful FTP GET operation.

The script may contain any number of standard FTP commands.

Valid additional scripting commands are listed below:


cd Path	Change the remote directory to the specified path.
del Filename	Delete the specified file from the remote server.
mkdir Directory	Create the specified remote directory on the server.
rn Filename NewFilename	Rename the remote file specified by Filename to the NewFilename.
move Filename NewFilename	Move the remote file located at Filename to the NewFilename.
rm Filename	Remove the specified file from the remote server.
rmdir Directory	Remove the remote directory from the server.
touch Filename	Create the specified file on the server.

This property is not available in the Sender.

AfterPut Property (FTP Task)

A set of FTP commands to be executed after the PUT.

Data Type

String

Default Value

Remarks

AfterPut is a script that is executed immediately following each successful FTP PUT operation.

The script may contain any number of standard FTP commands.

Valid additional scripting commands are listed below:


cd Path	Change the remote directory to the specified path.
del Filename	Delete the specified file from the remote server.
mkdir Directory	Create the specified remote directory on the server.
rn Filename NewFilename	Rename the remote file specified by Filename to the NewFilename.
move Filename NewFilename	Move the remote file located at Filename to the NewFilename.
rm Filename	Remove the specified file from the remote server.
rmdir Directory	Remove the remote directory from the server.
touch Filename	Create the specified file on the server.

This property is not available in the Receiver.

Append Property (FTP Task)

Whether or not the component should append data to the RemoteFile .

Data Type

Boolean

Default Value

false

Remarks

This property controls the task's upload behavior. When set to TRUE, the task will append data to the file specified by RemoteFile rather than creating or overwriting it.

This property is not available in the Receiver.

BeforeGet Property (FTP Task)

A set of FTP commands to be executed before the GET.

Data Type

String

Default Value

Remarks

BeforeGet is a script that is executed immediately before each successful FTP GET operation.

The script may contain any number of standard FTP commands.

Valid additional scripting commands are listed below:


cd Path	Change the remote directory to the specified path.
del Filename	Delete the specified file from the remote server.
mkdir Directory	Create the specified remote directory on the server.
rn Filename NewFilename	Rename the remote file specified by Filename to the NewFilename.
move Filename NewFilename	Move the remote file located at Filename to the NewFilename.
rm Filename	Remove the specified file from the remote server.
rmdir Directory	Remove the remote directory from the server.
touch Filename	Create the specified file on the server.

This property is not available in the Sender.

BeforePut Property (FTP Task)

A set of FTP commands to be executed before the PUT.

Data Type

String

Default Value

Remarks

BeforePut is a script that is executed immediately before each successful FTP PUT operation.

The script may contain any number of standard FTP commands.

Valid additional scripting commands are listed below:


cd Path	Change the remote directory to the specified path.
del Filename	Delete the specified file from the remote server.
mkdir Directory	Create the specified remote directory on the server.
rn Filename NewFilename	Rename the remote file specified by Filename to the NewFilename.
move Filename NewFilename	Move the remote file located at Filename to the NewFilename.
rm Filename	Remove the specified file from the remote server.
rmdir Directory	Remove the remote directory from the server.
touch Filename	Create the specified file on the server.

This property is not available in the Receiver.

Delete Property (FTP Task)

Controls if the remote file is deleted after download.

Data Type

Boolean

Default Value

false

Remarks

If this property is set to True, each file is deleted from the server after download.

This property is not available in the Sender.

DirList Property (FTP Task)

String denoting the name of the variable which contains the last directory listing entries.

Data Type

String

Default Value

"<none>"

Remarks

This property denotes a variable name which contains the collection of directory listings returned from the server when the Operation property has been set to opListDirectory. The collection is made up of entries for each listing in the current directory, specified by the RemotePath property.

The variable is in the form of a datatable. The table's rows represent a directory listing, and the columns represent a different property of the listing. The columns of the datatable are listed below:


(0) FileName	The name of the file being listed.
(1) FileSize	The size of the file.
(2) FileTime	The creation date of the file. In Unix systems the date is given in two types of formats: If the date is in the last 12 months the exact time is specified and the year is omitted. Otherwise only the date and the year but not hours or minutes are given.
(3) IsDir	Denotes whether the listing is a directory or a file.
(4) Listing	The filename, and extended file information.

NOTE: If this property is set to a valid ADO object when the Operation property is set to ReceiveFiles, the task will populate this table with a directory listing of all the files matching the FileMask on the server. The columns of this datatable are listed below:


(0) ReceivedFileName	The name of the received file.
(1) ReceivedFileSize	The size of the file.
(2) ReceivedFileDate	The creation date of the file. In Unix systems the date is given in two types of formats: If the date is in the last 12 months the exact time is specified and the year is omitted. Otherwise only the date and the year but not hours or minutes are given.
(3) ReceivedFileUser	The user name used to by the FTP task when downloading the remote file.

This property is read-only.

This property is not available in the Sender.

FileMask Property (FTP Task)

Indicates the type of files to download from the FTP server.

Data Type

String

Default Value

"*.*"

Remarks

As long as the server supports file masks, this property will limit what kinds of files the task will download from the server. Only files matching the pattern specified in FileMask will be retrieved.

The following special characters are supported for pattern matching:


?	Any single character.
*	Any characters or no characters (e.g., C*t matches Cat, Cot, Coast, Ct).
[,-]	A range of characters (e.g., [a-z], [a], [0-9], [0-9,a-d,f,r-z]).
\	The slash is ignored and exact matching is performed on the next character.

If these characters need to be used as a literal in a pattern, then they must be escaped by surrounding them with brackets []. Note: "]" and "-" do not need to be escaped. See below for the escape sequences:


Character	Escape Sequence
?	[?]
*	[*]
[	[[]
\	[\]

For example, to match the value [Something].txt, specify the pattern [[]Something].txt.

This property is not available in the Sender.

Firewall Property (FTP Task)

A set of properties related to firewall access.

Data Type

Firewall

Remarks

This is a Firewall type property which contains fields describing the firewall through which the task will attempt to connect.

FTPPort Property (FTP Task)

The port for the FTP service (default is 21).

Data Type

Integer

Verbose (0)
Info (1)
Warning (2)
Error (3)
Fatal (4)

Default Value

Remarks

This property controls what information the task logs. The possible values have the following affect on the task's behavior:


Verbose	The task will report all information regarding the transport.
Info	The task will report all major operations, as well as all warnings and errors.
Warning	The task will report any conditions that could result in unpredictable behavior as well as errors.
Error	The task will report all errors that prevent normal operations from completing.
Fatal	The task will report only serious errors that cause the task to completely stop functioning.

Operation Property (FTP Task)

The operation which will be executed by the FTP task.

Data Type

Enumeration

Possible Values

Receive Files (0)
List Directory (1)
Delete Files (2)

Default Value

Remarks

This property specifies the operation to be performed. Possible values are:

opReceiveFiles (default)
opListDirectory
opDeleteFiles

When set to opListDirectory DirList defines the package variable which will be populated with the results.

This property is not available in the Sender.

Other Property (FTP Task)

Defines a set of configuration settings to be used by the component.

Data Type

String

Default Value

Remarks

The task accepts one or more configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the task, access to these internal properties is provided through the Other property.

The Other property may be set to one or more configuration settings (name/value pairs). Set one setting per line. For example: configname1=value1 configname2=value2

Overwrite Property (FTP Task)

Whether or not the component should overwrite files during transfer.

Data Type

Boolean

Default Value

false

Remarks

This property is a value indicating whether or not the task should overwrite files on the server or local system if they already exist. If Overwrite is false, an error will be thrown whenever RemoteFile exists before an upload operation, or the file exists in LocalDirectory before a download operation.

false

Remarks

If set to true, the task will first attempt to use an existing connection. If no such connection exists, it will create a new connection. When the task completes, it will persist the connection so that the task will reuse it during the next polling interval. Setting this property to true can improve performance if you are polling very frequently.

Set the Logoff configuration to tell the task to logoff from the persisted connection after completion.

Remarks

If a value is specified, the task will directly upload the file to RemoteTempPath. Once the file transfer is complete, the task will move the file to the RemotePath.

This property is not available in the Receiver.

RuntimeLicense Property (FTP Task)

Specifies the component runtime license key.

Data Type

String

Default Value

Remarks

You can use the RuntimeLicense property to set the runtime key for the task license.

SSLAcceptServerCert Property (FTP Task)

Instructs the component to unconditionally accept the server certificate that matches the supplied certificate.

Data Type

Certificate

Remarks

If it finds any issues with the certificate presented by the server, the task will normally terminate the connection with an error. You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally.

This property is used to set a Public Key Certificate.

Ordinarily, the system will attempt to locate the public key in trusted certificate stores in the system registry. If a match is found, the certificate is trusted, and the process proceeds without error. If the certificate is not trusted, the task will report an error.

You may explicitly set a public key, either to accept a key that is not installed on the system, or to ensure that a specific key is presented. Public key certificates may be loaded from the machine registry or from file. If you click on the ellipses, a certificate selection dialog will open. To select a public key from the system registry, select the System Store tab or the User Store tab, and highlight the appropriate registry store. The list of available certificates will be shown below.

Alternatively, you may specify a public key on file. Select the PEM or Certificate File tabs to load a public key from file. You can use the browse button to examine the file system for the certificate that you wish to use. Public keys typically are stored in .CER, .DER, or .PEM files, but other formats may be used. You can click on the Open button to examine the contents of the certificate. Or, if you have a certificate stored in memory, you can write the contents of the certificate into the text box provided. Note that if you are loading a certificate from memory, the certificate must be Base-64 encoded, or the string representation of the certificate may become corrupted and uninterpretable.

Regardless of how you selected the certificate, once you hit the OK button, the task will attempt to verify that certificate selection. If successful, the subject of the certificate will be displayed in the property field. If the task was not able to verify the selection, a dialog box will appear instead detailing the verification error.

Note: You may also set SSLAcceptServerCertAcceptAny to True without opening the certificate selection dialog to force the task to unilaterally authenticate any server during the security handshake. It is strongly recommended that you use this only for testing purposes.

SSLAcceptServerCertAcceptAny Property (FTP Task)

Tells the component to accept any server certificate.

Data Type

Boolean

Default Value

false

Remarks

When set to true, the task will unilaterally authenticate any server during the security handshake. It is strongly recommended that you use this only for testing purposes.

SSLCert Property (FTP Task)

The certificate to use for client authentication during the SSL handshake.

Data Type

Certificate

Remarks

This property is used to assign a specific certificate for SSL client authentication.

This field is used to set a Private Key Certificate.

Private key certificates may be loaded from the registry, from files in PKCS#12 format, or from a PEM file format. If you click on the ellipses, a certificate selection dialog will open. To select a private key from the system registry, select the System Store tab or the User Store tab, and highlight the appropriate registry store. The list of certificates which have private keys will be shown below.

To select a private key certificate from a file in PKCS#12 format, select the PFX Store tab. The browse button can be used to examine the file system for PKCS#12 (.pfx or .p12) certificates. If you wish to examine the certificate, provide the password in the field provided and click on the Open button to examine the file store for certificates present. To load a certificate from PEM files, select the PEM tab. Like the PFX file selection, you can specify the password and click the Open button to examine the certificates in the PEM store, or you may paste any PEM data stored in memory.

SSLStartMode Property (FTP Task)

Determines how the component starts the SSL negotiation.

Data Type

Enumeration

Possible Values

Automatic (0)
Implicit (1)
Explicit (2)
None (3)

Default Value

Remarks

The SSLStartMode property may have one of the following values:


Automatic	If the remote port is set to the standard plaintext port of the protocol (where applicable), the task will behave the same as if SSLStartMode is set to Explicit. In all other cases, SSL negotiation will be implicit (Implicit).
Implicit	The SSL negotiation will start immediately after the connection is established.
Explicit	The task will first connect in plaintext, and then explicitly start SSL negotiation through a protocol command such as STARTTLS.
None	No SSL negotiation, no SSL security. All communication will be in plaintext mode.

Timeout Property (FTP Task)

A timeout for the component.

Data Type

Integer

Default Value

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion, or an error condition is encountered.

If Timeout is set to a positive value, the task will wait for the operation to complete before returning control.

If Timeout expires, and the operation is not yet complete, the task fails with an error.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when data is successfully sent or received.

Optionally, the behavior of the task may be changed to absolute timeouts, i.e. the task will wait for a maximum of Timeout seconds since the beginning of the operation, without extending the timeout period during communications.

This behavior is controlled by the AbsoluteTimeout configuration setting.

The default value for the Timeout property is 60 (seconds).

TransferMode Property (FTP Task)

The transfer mode (ASCII or Binary). If the value is 0 (default), the initial server mode will be used.

Data Type

Enumeration

Possible Values

Default (0)
ASCII (1)
Binary (2)

Default Value

Remarks

The valid options for the TransferMode property are as follows:


Default	The initial mode of the FTP server is taken. No change.
ASCII	Files are transferred in ASCII mode (TYPE A).
Binary	Files are transferred in Binary mode (TYPE I).

User Property (FTP Task)

The user id for login.

Data Type

String

Default Value

Store is used in conjunction with the Subject field in order to specify client certificates. If Store has a value, and Subject is set, a search for a certificate is initiated. Please refer to the Subject field for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.
SPC	Software publisher certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

If the provider is OpenSSL, the certificate store is a file containing a certificate and a private key. This property must be set to the name of the file.

StorePassword
String

If the certificate store is of a type that requires a password, this property is used to specify that password in order to open the certificate store.

StoreType
CertStoreTypes

The type of certificate store for this certificate.

The task supports both public and private keys in a variety of formats. When the cstAuto value is used the task will automatically determine the type. This field can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: this store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: this store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or base64-encoded) representing a certificate store in PFX (PKCS12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: this store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: this store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: this store type is only available in Java and .NET.
23 (cstPKCS11)	The certificate is present on a physical security key accessible via a PKCS11 interface. To use a security key the necessary data must first be collected using the CERTMGR task. The ListStoreCertificates method may be called after setting CertStoreType to `cstPKCS11`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS11 dll. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN. Code Example: SSH Authentication with Security Key `certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Subject
String

The subject of the certificate used for client authentication.

When this property is set, a search is performed in the current certificate store certificate with matching subject.

If an exact match is not found, the store is searched for subjects containing the value of the property.

When setting the property to a partial subject, CN= should be omitted. For example, the following code would find the certificate with subject CN=Test Certificate, OU=People, C=US

Example (Searching with partial subject)

Control.CertSubject = "Test"

If a match is not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

If a matching certificate is found, Subject is set to the full subject of the matching certificate.

Thumbprint
String (read-only)

The thumbprint of the certificate.

This field is used to specify the thumbprint of the certificate. When there are multiple certificates in the store that have the same subject, the thumbprint will be used to distinguish between them.

Firewall Type

The firewall the component will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall such as the firewall Host and the FirewallType.

Fields

AutoDetect
Boolean

Tells the task whether or not to automatically detect and use firewall system settings, if available.

FirewallType
FirewallTypes

Determines the type of firewall to connect through. The applicable values are the following:


fwNone (0)	No firewall (default setting).
fwTunnel (1)	Connect through a tunneling proxy. Port is set to 80.
fwSOCKS4 (2)	Connect through a SOCKS4 Proxy. Port is set to 1080.
fwSOCKS5 (3)	Connect through a SOCKS5 Proxy. Port is set to 1080.

Host
String

Name or IP address of firewall (optional). If a Host is given, requested connections will be authenticated through the specified firewall when connecting.

If the Host field is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the Host field is set to the corresponding address. If the search is not successful, an error is returned.

Password
String

A password if authentication is to be used when connecting through the firewall. If Host is specified, the User and Password fields are used to connect and authenticate to the given firewall. If the authentication fails, a trappable error is fired.

Port
Integer

The TCP port for the firewall Host. See the description of the Host field for details.

Note that the Port is set automatically when FirewallType is set to a valid value. See the description of the FirewallType field for details.

User
String

A user name if authentication is to be used connecting through a firewall. If the Host is specified, the User and Password fields are used to connect and authenticate to the given Firewall. If the authentication fails, a trappable error is fired.

Config Settings (FTP Task)

The task accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the task, access to these internal properties is provided through the Other property.

FTP Config Settings

Account: The user account to login with.

Some servers may require an Account for logon or in order to access specific privileges, like uploading or deleting files.

AutoSelectDataIP: Automatically select the data connection IP.

This setting controls the selection logic of the data connection. By default, this value is True and the task will attempt to determine the best IP for the data connection based on the returned value from the server. It is recommended to leave this value set to True unless there is a reason to disable it.

In many cases, FTP servers are not configured to return a valid public IP in the PASV response. When Secure Sockets Layer/Transport Layer Security (SSL/TLS) is used any network address translation (NAT) done by the firewall cannot occur. The result is the client may receive an IP that is not accessible.

This setting is designed to allow the connection to succeed in as many cases as possible. When the IP for the data connection is received from the server, the task will inspect the value. If the received value is not within the known private IP ranges, the task will use it, assuming it is a valid public IP. If the received value is a private IP, the task will instead assume the data connection should be established to the same IP as the command connection (true in almost all cases).

When this setting is False, the task will not perform any checks on the received value. When set to False, UseRemoteHostAddressForPassive is applicable.

CheckFileExists: Whether to check if the remote file exists before uploading.

If set to "FALSE" the adapter will not perform a directory listing to check for the presence of the file on the server before uploading the file.

NOTE: This setting is only applicable to the FTP Transmitter.

DirEntryPattern: Allows the use of regular expressions to parse non-standard directory entry formats.

In some cases, the server may return a directory entry format that cannot be automatically parsed by the adapter. In this case, the full entry format can be seen in the log when the TransportLog's LogMode field is set to Verbose. You can use this property to define a regular expression to parse the entry. The value of this setting is specified in the following format:

A,B,C,X=Y|RegEx

A,B,C, and X represent integer values that correspond to the capturing groups of the regular expression in the following order:

FileName
FileSize
FileTime
IsDir

Because group X represents the IsDir value, the user must specify Y to indicate what value that group must have in order for IsDir to be True.

Take, for instance, a simple entry in this format:

22 Test.txt

In this example, "22" is the FileSize and "Test.txt" is the FileName. To parse this entry, we will define the DirEntryPattern as follows:

2,1,-1,-1|([0-9]+)\s(.*)

The first value "2" indicates that the first field (FileName) corresponds to the second capturing group in the regular expression. The second value "1" indicates that the second field (FileSize) corresponds to the first capturing group in the regular expression. The capturing group is the regular expression in parenthesis. In the previous example, the first capturing group is ([0-9]+) and the second capturing group is (.*).

As seen in this example, -1 also can be specified as the integer value. When this is specified, that field is ignored.

DownloadCacheFile: When set, only new files will be downloaded from the server.

This may be set to the location of a file on disk that will hold the names of files that were previously downloaded from the server. On each PollingInterval the task will check to see if the file on the server exists in this list. If the file exists in this list, it is determined that the file was previously downloaded and is not downloaded on the current polling interval. The list is automatically updated on each polling interval. Please see DownloadCacheFileDuration and EnableFileDetailsComparison for more configuration options.

DownloadCacheFileDuration: The number of minutes that a file name will remain in the download cache.

If a file name is added to the DownloadCacheFile and is not seen on the server again within DownloadCacheFileDuration minutes, it will be removed from the cache. This can prevent the download cache file from growing too large in certain cases.

The default value is 0, meaning that files will never be removed.

This setting is only applicable if DownloadCacheFile is set.

EnableFileDetailsComparison: Whether the receive task should consider metadata differences when deciding whether to download a file again.

This setting is used in conjunction with DownloadCacheFile, and is only available on the receive task. If DownloadCacheFile is enabled, this setting can be used to control how the receive task uses the download file cache information when deciding whether to download a file again. (Similar to the "Enable Timestamp Comparison" property on Microsoft's FTP BizTalk Adapter.)

If this is set to False, the receive task will not download a file again if the cache contains any information about it (that is, if it has been downloaded before).

If this is set to True, the receive task will check the metadata of the remote file against its cached metadata, and will download the file again if any of the metadata differs.

ExcludeMask: Instructs the task to exclude some files when downloading.

This configuration setting is used to specify a mask to exclude certain files when downloading. If a file matches both this mask and FileMask, the file will be not be downloaded.

LocalFile: The name of the LocalFile to which the remote file will be saved.

When set to true, the task will use the specified filename when saving the file in LocalDirectory instead of the name of the file on the server.

Note that if multiple files are downloaded from the server, the task will attempt to save all files using the value specified. For this reason, it is recommended that this setting be used only in cases where only one file is being downloaded from the server.

Logoff: Whether or not to logoff from the server after execution.

This configuration is only used when PersistentConnection has been set to true. Set this to true to tell the task to logoff from the persisted connection once execution completes.

The default for this configuration setting is false.

MaxFilesPerPollingInterval: The maximum number of files that will be downloaded from the server during a single poll.

By default, the task will download all available files (matching any filemasks) when polling the target directory. To limit the number of files that will be downloaded in a single poll, set this to the maximum number.

Note that to avoid downloading the same subset of files each poll, either DownloadCacheFile or DeleteMode should also be used.

ModeZCompressionLevel: Used to specify the level of compression used.

The default value is 7. Valid values range from 0 to 9. A higher value indicates that a higher compression level is being used. This is valid only when UseModeZ is set to True.

PortRange: Allows the specification of a port range the task listens to.

When set to use active mode (Passive = False), the task uses any available port to listen to incoming connections from the server. You can override this behavior by setting PortRange to a value containing the range of ports the task will be listening to.

The range is provided as start-end, for instance: "1024-" stands for anything higher than 1024, "1024-2048" stands for ports between 1024 and 2048 inclusive, "4000-4010, 50000-50010" stands for ports between 4000 and 40010 or between 50000 and 50010.

RecursiveDownload: When true, all files and folders in the RemotePath are downloaded recursively.

When RecursiveDownload is set to true, all files and folders in the path specified in RemotePath are downloaded to LocalDirectory. This download is recursive and will continue down through the full directory structure within the directory specified in RemotePath. Default value is "false".

RecursiveUpload: When true, all files and folders in the folder specified in LocalFile are uploaded recursively.

When RecursiveUpload is set to true, all files and folders in the path specified in LocalFile are uploaded to RemotePath. This upload is recursive and will continue down through the full directory structure within the directory specified in LocalFile. Default value is "false".

RenameMode: The condition under which RenameTo is used.

This setting controls when the value specified by RenameTo is used. If RenameTo is not specified, this setting has no impact. By default, downloaded files are only renamed after being successfully submitted to BizTalk (a value of 1). Possible values are:


1 (OnSuccess - default)	The file is renamed using the value in RenameTo only after the message is successfully submitted to BizTalk.
2 (OnFailure)	The file is renamed using the value in RenameTo only after the message submission to BizTalk fails.
3 (Always)	The file is renamed using the value in RenameTo regardless of the message submission result.

RenameTo: A filename to which RemoteFile will be renamed.

After downloading a file, the file on the server may be renamed using this setting. This rename action will take place after the batch submission to BizTalk. If you need to perform actions on a file before this, use the AfterGet property. This setting is used in conjunction with RenameMode to conditionally rename a file. For instance, to rename a file after it has been successfully submitted to BizTalk set the Other property of the task like so: RenameTo=%SourceFileName%.done Macros such as %SourceFileName% are supported as in the given example. A full list of supported macros can be found at the bottom of this section.

ReusePISSLSessionInDI: Whether the PI SSL session will be reused for the DI connection.

When set to True, the task will reuse the PI SSL session when creating the DI connection. The default value for this configuration setting is False, in which case, the task will create a separate SSL session for the DI connection.

ReuseSSLSessionInDI: Whether the SSL session will be reused for the DI connection.

When set to True (default), the task will ask the server to reuse the existing DI SSL session. When set to False, a new SSL session will always be created for the DI connection.

TemporaryDownloadExtension: An extension to be appended during download.

During download, it may be necessary for the file on the server to be renamed. After the download is complete the file will be renamed back to the original name.

TemporaryUploadExtension: An extension to be appended during upload.

During upload, it may be necessary for the RemoteFile to be written to a temporary file name. For example, some business process may be set up to expect a specific file extension. Using this setting will allow the task to upload the file without the remainder of the process attempting to pick up the incomplete file.

UseClearCommandChannel: Allows for the Clear Command Channel (CCC) command.

When set, the task will send the CCC command to the server requesting a clear (unprotected) command channel.

UseClearDataChannel: Allows for the PROT C command.

When this is set, the task will use a clear (unprotected) data channel by sending the PROT C command to the server.

UseEPSV: Allows extended passive mode.

When set, extended passive mode will be used.

UseFSwitch: Specifies whether or not the -F parameter is used when listing directory contents.

This is only applicable when UseSimpleDirList is set to true. When UseSimpleDirList is true, the task issues the command "NLST -F <filemask>". The -F parameter tells the server to omit folder names from the response. Some server do not support the -F parameter. To disable the use of the -F parameter set UseFSwitch to False. The default value is True.

UseMLSD: Uses listings for machine processing.

When this is set to True the task will list files in the directory using the MLSD command. This command is an extension to the protocol which defines a more standardized and reliable directory listing format. Not all servers support this command. The default value is False.

UseModeZ: Allows compression to be used when transferring data.

The default value is False. When set to True, the task will issue the MODE Z command to the FTP server. This will enable deflate compression so that all data transferred are first compressed either by the server (when downloading) or by the task (when uploading). Note: Not all servers support this feature.

UseProtWhenImplicit: Sends PROT P to the server.

The task will send the PROT P command to the server explicitly indicating that the data channel will be protected when this is set. This only applies when the SSLStartMode is set to sslImplicit.

UseRemoteHostAddressForPassive: Instructs the task to use the FTPServer in passive mode.

This setting is only used when Passive is true. When this is set to false (default), the task parses the remote host to send replies to from the previous response from the server. If this is true, the task uses the value at FTPServer instead.

SSL Config Settings

ReuseSSLSession: Determines if the SSL session is reused.

If set to true, the task will reuse the context if and only if the following criteria are met:

The target host name is the same.
The system cache entry has not expired (default timeout is 10 hours).
The application process that calls the function is the same.
The logon session is the same.
The instance of the task is the same.

SSLCipherStrength: The minimum cipher strength used for bulk encryption.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

SSLEnabledCipherSuites: The cipher suite to be used in an SSL negotiation.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the task will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when UseInternalSecurityAPI is False (default): // The "Other" property could contain ONE of the following lines: SSLEnabledCipherSuites=* SSLEnabledCipherSuites=CALG_AES_256 SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES Possible values when UseInternalSecurityAPI is False (default) include:

CALG_3DES
CALG_3DES_112
CALG_AES
CALG_AES_128
CALG_AES_192
CALG_AES_256
CALG_AGREEDKEY_ANY
CALG_CYLINK_MEK
CALG_DES
CALG_DESX
CALG_DH_EPHEM
CALG_DH_SF
CALG_DSS_SIGN
CALG_ECDH
CALG_ECDH_EPHEM
CALG_ECDSA
CALG_ECMQV
CALG_HASH_REPLACE_OWF
CALG_HUGHES_MD5
CALG_HMAC
CALG_KEA_KEYX
CALG_MAC
CALG_MD2
CALG_MD4
CALG_MD5
CALG_NO_SIGN
CALG_OID_INFO_CNG_ONLY
CALG_OID_INFO_PARAMETERS
CALG_PCT1_MASTER
CALG_RC2
CALG_RC4
CALG_RC5
CALG_RSA_KEYX
CALG_RSA_SIGN
CALG_SCHANNEL_ENC_KEY
CALG_SCHANNEL_MAC_KEY
CALG_SCHANNEL_MASTER_HASH
CALG_SEAL
CALG_SHA
CALG_SHA1
CALG_SHA_256
CALG_SHA_384
CALG_SHA_512
CALG_SKIPJACK
CALG_SSL2_MASTER
CALG_SSL3_MASTER
CALG_SSL3_SHAMD5
CALG_TEK
CALG_TLS1_MASTER
CALG_TLS1PRF

Example values when UseInternalSecurityAPI is True:

// The "Other" property could contain ONE of the following lines:
SSLEnabledCipherSuites=*
SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA
SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_DH_ANON_WITH_AES_128_CBC_SHA

Possible values when UseInternalSecurityAPI is True include:

TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
TLS_DHE_DSS_WITH_AES_128_CBC_SHA
TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
TLS_DHE_DSS_WITH_AES_256_CBC_SHA
TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
TLS_DHE_DSS_WITH_DES_CBC_SHA
TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
TLS_DHE_RSA_WITH_AES_256_CBC_SHA
TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
TLS_DHE_RSA_WITH_DES_CBC_SHA
TLS_RSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_128_GCM_SHA256
TLS_RSA_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_AES_128_CBC_SHA
TLS_RSA_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA
TLS_RSA_WITH_AES_256_CBC_SHA256
TLS_RSA_WITH_DES_CBC_SHA
TLS_RSA_WITH_RC4_128_MD5
TLS_RSA_WITH_RC4_128_SHA

If SSLEnabledProtocols is configured to use TLS 1.3 the following values are supported:

TLS_AES_128_GCM_SHA256
TLS_AES_256_GCM_SHA384

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols: Used to enable/disable the supported security protocols.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:


TLS1.3	12288 (Hex 3000) (Experimental)
TLS1.2	3072 (Hex C00) (Default)
TLS1.1	768 (Hex 300) (Default)
TLS1	192 (Hex C0) (Default)
SSL3	48 (Hex 30)
SSL2	12 (Hex 0C)

Note: TLS 1.1 and TLS1.2 support are only available starting with Windows 7.

Note: Enabling TLS 1.3 will automatically set UseInternalSecurityAPI to True.

SSLIncludeCertChain: Whether the entire certificate chain is included in the SSLServerAuthentication event.

This setting specifies whether the transport log contains the full certificate chain. By default this value is False and only the leaf certificate will be present.

If set to True all certificates returned by the server will be present in the transport log. This includes the leaf certificate, any intermediate certificate, and the root certificate.

Note: When UseInternalSecurityAPI is set to True this value is automatically set to True. This is needed for proper validation when using the internal provider.

SSLSecurityFlags: Flags that control certificate verification.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:


0x00000001	Ignore time validity status of certificate.
0x00000002	Ignore time validity status of CTL.
0x00000004	Ignore non-nested certificate times.
0x00000010	Allow unknown Certificate Authority.
0x00000020	Ignore wrong certificate usage.
0x00000100	Ignore unknown certificate revocation status.
0x00000200	Ignore unknown CTL signer revocation status.
0x00000400	Ignore unknown Certificate Authority revocation status.
0x00000800	Ignore unknown Root revocation status.
0x00008000	Allow test Root certificate.
0x00004000	Trust test Root certificate.
0x80000000	Ignore non-matching CN (certificate CN not-matching server name).

TLS12SignatureAlgorithms: Defines the allowed TLS 1.2 signature algorithms when UseInternalSecurityAPI is True.

This setting specifies the allowed server certificate signature algorithms when UseInternalSecurityAPI is True and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the task will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the task will fail with an error.

The format of this value is a comma separated list of hash-signature combinations. For instance: // The "Other" could contain ALL of these lines: UseInternalSecurityAPI=true SSLEnabledProtocols=3072 TLS12SignatureAlgorithms=sha1-rsa,sha1-dsa,sha256-rsa,sha256-dsa The default value for this setting is "sha1-rsa,sha1-dsa,sha224-rsa,sha224-dsa,sha256-rsa,sha256-dsa,sha384-rsa,sha384-dsa,sha512-rsa,sha512-dsa".

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups: The supported groups for ECC.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and UseInternalSecurityAPI is set to True, the values refer to the supported groups for ECC. The following values are supported:

"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)

TLS13KeyShareGroups: The groups for which to pregenerate key shares.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448"
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1"
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096"
"ffdhe_6144"
"ffdhe_8192"

TLS13SignatureAlgorithms: The allowed certificate signature algorithms.

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

"rsa_pkcs1_sha256" (default)
"rsa_pkcs1_sha384" (default)
"rsa_pkcs1_sha512" (default)

The default value is rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512. This setting is only applicable when SSLEnabledProtocols includes TLS 1.3.

TLS13SupportedGroups: The supported groups for (EC)DHE key exchange.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448" (default)
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096" (default)
"ffdhe_6144" (default)
"ffdhe_8192" (default)

General Config Settings

AbsoluteTimeout: Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

LocalHost: The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

The LocalHost configuration contains the name of the local host as obtained by the Gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the task initiate connections (or accept in the case of server tasks) only through that interface.

If the task is connected, the LocalHost configuration shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

TcpNoDelay: Whether or not to delay when sending packets.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

UseInternalSecurityAPI: Tells the task whether or not to use the system security libraries or an internal implementation.

When set to False, the task will use the system security libraries by default to perform cryptographic functions where applicable. In this case, calls to unmanaged code will be made. In certain environments this is not desirable. To use a completely managed security implementation set this setting to True.

Setting this setting to True tells the task to use the internal implementation instead of using the system security libraries.

On Windows, this setting is set to False by default. On Linux/macOS, this setting is set to True by default.

If using the .NET Standard Library, this setting will be True on all platforms. The .NET Standard library does not support using the system security libraries.

Note: This setting is static. The value set is applicable to all tasks used in the application.

When this value is set the product's system DLL is no longer required as a reference, as all unmanaged code is stored in that file.