SCP Component
Properties Methods Events Configuration Settings Errors
The SCP component can be used to transfer files to and from SSH servers using the Secure Copy Protocol (SCP).
Syntax
TiphSCP
Remarks
The SCP component is the SSH-enabled equivalent of the IP*Works! RCP component. The main difference is the introduction of a set of new properties and events that deal with SSH security. The SSHHost and SSHPort properties specify the SSH server to use. The SSHUser and SSHPassword properties allow the client to authenticate itself with the server. The SSHServerAuthentication event and/or SSHAcceptServerHostKey property allow you to check the server identity. Finally, the SSHStatus event provides information about the SSH handshake.
The SCP component implements a standard SCP File Transfer client.
The first step in using the component is specifying the SSHHost, SSHUser and SSHPassword. The file to upload to or download from is given by the RemoteFile property. The file to download to or upload from is specified by LocalFile.
If LocalFile is set to something other than an empty string, then files are received in LocalFile, otherwise the data is received through the Transfer event. StartTransfer and EndTransfer are fired at the beginning and end of transmission.
Property List
The following is the full list of the properties of the component with short descriptions. Click on the links for further details.
| Connected | Triggers a connection or disconnection. |
| FilePermissions | The file permissions for the RemoteFile . |
| FirewallAutoDetect | This property tells the component whether or not to automatically detect and use firewall system settings, if available. |
| FirewallType | This property determines the type of firewall to connect through. |
| FirewallHost | This property contains the name or IP address of firewall (optional). |
| FirewallPassword | This property contains a password if authentication is to be used when connecting through the firewall. |
| FirewallPort | This property contains the TCP port for the firewall Host . |
| FirewallUser | This property contains a user name if authentication is to be used connecting through a firewall. |
| LocalFile | The path to a local file for download/upload. If the file exists, it is overwritten. |
| LocalHost | The name of the local host or user-assigned IP interface through which connections are initiated or accepted. |
| LocalPort | The TCP port in the local host where IPPort binds. |
| Overwrite | Whether or not the component should overwrite files during transfer. |
| RemoteFile | The name of the remote file for uploading, downloading, etc. |
| RemotePath | The remote path on the server. |
| SSHAcceptServerHostKeyEncoded | The certificate (PEM/base64 encoded). |
| SSHAuthMode | The authentication method to be used the component when calling SSHLogon . |
| SSHCertEncoded | The certificate (PEM/base64 encoded). |
| SSHCertStore | The name of the certificate store for the client certificate. |
| SSHCertStorePassword | If the certificate store is of a type that requires a password, this property is used to specify that password in order to open the certificate store. |
| SSHCertStoreType | The type of certificate store for this certificate. |
| SSHCertSubject | The subject of the certificate used for client authentication. |
| SSHCompressionAlgorithms | A comma-separated list containing all allowable compression algorithms. |
| SSHEncryptionAlgorithms | A comma-separated list containing all allowable compression algorithms. |
| SSHHost | The address of the SSH host. |
| SSHPassword | The password for SSH password-based authentication. |
| SSHPort | The port on the SSH server where the SSH service is running; by default, 22. |
| SSHUser | The username for SSH authentication. |
| Timeout | A timeout for the component. |
Method List
The following is the full list of the methods of the component with short descriptions. Click on the links for further details.
| Config | Sets or retrieves a configuration setting . |
| DecodePacket | Decodes a hex-encoded SSH packet. |
| DoEvents | Processes events from the internal message queue. |
| Download | Download a RemoteFile from an SCP server. |
| EncodePacket | Hex encodes an SSH packet. |
| GetSSHParam | Used to read a field from an SSH packet's payload. |
| GetSSHParamBytes | Used to read a field from an SSH packet's payload. |
| Interrupt | Interrupt the current method. |
| SetSSHParam | Used to write a field to the end of a payload. |
| SSHLogoff | Logoff from the SSH server. |
| SSHLogon | Logon to the SSHHost using the current SSHUser and SSHPassword . |
| Upload | Upload a file specified by LocalFile to an SCP server. |
Event List
The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.
| Connected | Fired immediately after a connection completes (or fails). |
| ConnectionStatus | Fired to indicate changes in connection state. |
| Disconnected | Fired when a connection is closed. |
| EndTransfer | Fired when a file completes downloading/uploading. |
| Error | Information about errors during data delivery. |
| SSHCustomAuth | Fired when the component is doing custom authentication. |
| SSHKeyboardInteractive | Fired when the component receives a request for user input from the server. |
| SSHServerAuthentication | Fired after the server presents its public key to the client. |
| SSHStatus | Shows the progress of the secure connection. |
| StartTransfer | Fired when a file starts downloading/uploading. |
| Transfer | Fired during file download/upload. |
Configuration Settings
The following is a list of configuration settings for the component with short descriptions. Click on the links for further details.
| RecursiveMode | If set to true the component will recursively upload or download files. |
| DirectoryPermissions | The permissions of folders created on the remote host. |
| PreserveFileTime | Preserves the file's modified time during transfer. |
| LastAccessedTime | The last accessed time of the remote file. |
| LastModifiedTime | The last modified time of the remote file. |
| ServerResponseWindow | The time to wait for a server response in milliseconds. |
| ClientSSHVersionString | The SSH version string used by the component. |
| SignedSSHCert | The CA signed client public key used when authenticating. |
| SSHAcceptServerCAKey | The CA public key that signed the server's host key. |
| SSHAcceptAnyServerHostKey | If set the component will accept any key presented by the server. |
| SSHAcceptServerHostKeyFingerPrint | The fingerprint of the server key to accept. |
| SSHKeyExchangeAlgorithms | Specifies the supported key exchange algorithms. |
| SSHMacAlgorithms | Specifies the supported Mac algorithms. |
| SSHKeyRenegotiate | Causes the component to renegotiate the SSH keys. |
| KeyRenegotiationThreshold | Sets the threshold for the SSH Key Renegotiation. |
| KerberosRealm | The fully qualified domain name of the Kerberos Realm to use for GSSAPI authentication. |
| KerberosDelegation | If true, asks for credentials with delegation enabled during authentication. |
| KerberosSPN | The Kerberos Service Principal Name of the SSH host. |
| LogSSHPackets | If true, detailed SSH packet logging is performed. |
| MaxPacketSize | The maximum packet size of the channel, in bytes. |
| MaxWindowSize | The maximum window size allowed for the channel, in bytes. |
| PreferredDHGroupBits | The size (in bits) of the preferred modulus (p) to request from the server. |
| ConnectionTimeout | Sets a separate timeout value for establishing a connection. |
| FirewallAutoDetect | Tells the component whether or not to automatically detect and use firewall system settings, if available. |
| FirewallHost | Name or IP address of firewall (optional). |
| FirewallPassword | Password to be used if authentication is to be used when connecting through the firewall. |
| FirewallPort | The TCP port for the FirewallHost;. |
| FirewallType | Determines the type of firewall to connect through. |
| FirewallUser | A user name if authentication is to be used connecting through a firewall. |
| KeepAliveTime | The inactivity time in milliseconds before a TCP keep-alive packet is sent. |
| KeepAliveInterval | The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received. |
| Linger | When set to True, connections are terminated gracefully. |
| LingerTime | Time in seconds to have the connection linger. |
| LocalHost | The name of the local host through which connections are initiated or accepted. |
| LocalPort | The TCP port in the local host where the component binds. |
| MaxLineLength | The maximum amount of data to accumulate when no EOL is found. |
| MaxTransferRate | The transfer rate limit in bytes per second. |
| RecordLength | The length of received data records. |
| TCPKeepAlive | Determines whether or not the keep alive socket option is enabled. |
| UseIPv6 | Whether to use IPv6. |
| TcpNoDelay | Whether or not to delay when sending packets. |
| AbsoluteTimeout | Determines whether timeouts are inactivity timeouts or absolute timeouts. |
| FirewallData | Used to send extra data to the firewall. |
| InBufferSize | The size in bytes of the incoming queue of the socket. |
| OutBufferSize | The size in bytes of the outgoing queue of the socket. |
| CodePage | The system code page used for Unicode to Multibyte translations. |