SCP Class
Properties Methods Events Configuration Settings Errors
The SCP class can be used to transfer files to and from SSH servers using the Secure Copy Protocol (SCP).
Syntax
ipworksssh.scp()
Remarks
The SCP class is the SSH-enabled equivalent of the IPWorks RCP class. The SSHHost and SSHPort properties specify the SSH server to use. The SSHUser and SSHPassword properties allow the client to authenticate itself with the server. The SSHServerAuthentication event and/or SSHAcceptServerHostKey property allow you to check the server identity. Finally, the SSHStatus event provides information about the SSH handshake.
The SCP class implements a standard SCP File Transfer client.
The first step in using the class is specifying the SSHHost, SSHUser and SSHPassword. The file to upload to or download from is given by the RemoteFile property. The file to download to or upload from is specified by LocalFile.
If LocalFile is set to something other than an empty string, then files are received in LocalFile, otherwise the data is received through the Transfer event. StartTransfer and EndTransfer are fired at the beginning and end of transmission.
Property List
The following is the full list of the properties of the class with short descriptions. Click on the links for further details.
Connected | Triggers a connection or disconnection. |
FilePermissions | The file permissions for the RemoteFile . |
Firewall | A set of properties related to firewall access. |
LocalFile | The path to a local file for upload/download. |
LocalHost | The name of the local host or user-assigned IP interface through which connections are initiated or accepted. |
LocalPort | The TCP port in the local host where the class binds. |
Overwrite | Whether or not the class should overwrite files during transfer. |
RemoteFile | The name of the remote file for uploading, downloading, etc. |
RemotePath | The remote path on the server. |
SSHAcceptServerHostKey | Instructs the class to accept the server host key that matches the supplied key. |
SSHAuthMode | The authentication method to be used the class when calling SSHLogon . |
SSHCert | A certificate to be used for authenticating the SSHUser . |
SSHCompressionAlgorithms | A comma-separated list containing all allowable compression algorithms. |
SSHEncryptionAlgorithms | A comma-separated list containing all allowable encryption algorithms. |
SSHHost | The address of the SSH host. |
SSHPassword | The password for SSH password-based authentication. |
SSHPort | The port on the SSH server where the SSH service is running; by default, 22. |
SSHUser | The username for SSH authentication. |
Timeout | A timeout for the class. |
Method List
The following is the full list of the methods of the class with short descriptions. Click on the links for further details.
Config | Sets or retrieves a configuration setting. |
DecodePacket | Decodes a hex-encoded SSH packet. |
DoEvents | Processes events from the internal message queue. |
Download | Download a RemoteFile from an SCP server. |
EncodePacket | Hex encodes an SSH packet. |
GetSSHParam | Used to read a field from an SSH packet's payload. |
GetSSHParamBytes | Used to read a field from an SSH packet's payload. |
Interrupt | Interrupt the current method. |
Reset | Reset the class. |
SetSSHParam | Used to write a field to the end of a payload. |
SSHLogoff | Logoff from the SSH server. |
SSHLogon | Logon to the SSHHost using the current SSHUser and SSHPassword . |
Upload | Upload a file specified by LocalFile to an SCP server. |
Event List
The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.
Connected | Fired immediately after a connection completes (or fails). |
ConnectionStatus | Fired to indicate changes in connection state. |
Disconnected | Fired when a connection is closed. |
EndTransfer | Fired when a file completes downloading/uploading. |
Error | Information about errors during data delivery. |
Log | Fires once for each log message. |
SSHCustomAuth | Fired when the class is doing custom authentication. |
SSHKeyboardInteractive | Fired when the class receives a request for user input from the server. |
SSHServerAuthentication | Fired after the server presents its public key to the client. |
SSHStatus | Shows the progress of the secure connection. |
StartTransfer | Fired when a file starts downloading/uploading. |
Transfer | Fired during file download/upload. |
Configuration Settings
The following is a list of configuration settings for the class with short descriptions. Click on the links for further details.
DirectoryPermissions | The permissions of folders created on the remote host. |
LastAccessedTime | The last accessed time of the remote file. |
LastModifiedTime | The last modified time of the remote file. |
PreserveFileTime | Preserves the file's modified time during transfer. |
RecursiveMode | If set to true the class will recursively upload or download files. |
ServerResponseWindow | The time to wait for a server response in milliseconds. |
ClientSSHVersionString | The SSH version string used by the class. |
EnablePageantAuth | Whether to use a key stored in Pageant to perform client authentication. |
KerberosDelegation | If true, asks for credentials with delegation enabled during authentication. |
KerberosRealm | The fully qualified domain name of the Kerberos Realm to use for GSSAPI authentication. |
KerberosSPN | The Kerberos Service Principal Name of the SSH host. |
KeyRenegotiationThreshold | Sets the threshold for the SSH Key Renegotiation. |
LogLevel | Specifies the level of detail that is logged. |
MaxPacketSize | The maximum packet size of the channel, in bytes. |
MaxWindowSize | The maximum window size allowed for the channel, in bytes. |
PasswordPrompt | The text of the password prompt used in keyboard-interactive authentication. |
PreferredDHGroupBits | The size (in bits) of the preferred modulus (p) to request from the server. |
RecordLength | The length of received data records. |
ServerSSHVersionString | The remote host's SSH version string. |
SignedSSHCert | The CA signed client public key used when authenticating. |
SSHAcceptAnyServerHostKey | If set the class will accept any key presented by the server. |
SSHAcceptServerCAKey | The CA public key that signed the server's host key. |
SSHAcceptServerHostKeyFingerPrint | The fingerprint of the server key to accept. |
SSHFingerprintHashAlgorithm | The algorithm used to calculate the fingerprint. |
SSHFingerprintMD5 | The server hostkey's MD5 fingerprint. |
SSHFingerprintSHA1 | The server hostkey's SHA1 fingerprint. |
SSHFingerprintSHA256 | The server hostkey's SHA256 fingerprint. |
SSHKeepAliveCountMax | The maximum number of keep alive packets to send without a response. |
SSHKeepAliveInterval | The interval between keep alive packets. |
SSHKeyExchangeAlgorithms | Specifies the supported key exchange algorithms. |
SSHKeyRenegotiate | Causes the class to renegotiate the SSH keys. |
SSHMacAlgorithms | Specifies the supported Mac algorithms. |
SSHPubKeyAuthSigAlgorithms | Specifies the enabled signature algorithms that may be used when attempting public key authentication. |
SSHPublicKeyAlgorithms | Specifies the supported public key algorithms. |
SSHVersionPattern | The pattern used to match the remote host's version string. |
TryAllAvailableAuthMethods | If set to true, the class will try all available authentication methods. |
WaitForChannelClose | Whether to wait for channels to be closed before disconnected. |
WaitForServerDisconnect | Whether to wait for the server to close the connection. |
ConnectionTimeout | Sets a separate timeout value for establishing a connection. |
FirewallAutoDetect | Tells the class whether or not to automatically detect and use firewall system settings, if available. |
FirewallHost | Name or IP address of firewall (optional). |
FirewallPassword | Password to be used if authentication is to be used when connecting through the firewall. |
FirewallPort | The TCP port for the FirewallHost;. |
FirewallType | Determines the type of firewall to connect through. |
FirewallUser | A user name if authentication is to be used connecting through a firewall. |
KeepAliveInterval | The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received. |
KeepAliveTime | The inactivity time in milliseconds before a TCP keep-alive packet is sent. |
Linger | When set to True, connections are terminated gracefully. |
LingerTime | Time in seconds to have the connection linger. |
LocalHost | The name of the local host through which connections are initiated or accepted. |
LocalPort | The port in the local host where the class binds. |
MaxLineLength | The maximum amount of data to accumulate when no EOL is found. |
MaxTransferRate | The transfer rate limit in bytes per second. |
ProxyExceptionsList | A semicolon separated list of hosts and IPs to bypass when using a proxy. |
TCPKeepAlive | Determines whether or not the keep alive socket option is enabled. |
TcpNoDelay | Whether or not to delay when sending packets. |
UseIPv6 | Whether to use IPv6. |
AbsoluteTimeout | Determines whether timeouts are inactivity timeouts or absolute timeouts. |
FirewallData | Used to send extra data to the firewall. |
InBufferSize | The size in bytes of the incoming queue of the socket. |
OutBufferSize | The size in bytes of the outgoing queue of the socket. |
BuildInfo | Information about the product's build. |
CodePage | The system code page used for Unicode to Multibyte translations. |
LicenseInfo | Information about the current license. |
UseInternalSecurityAPI | Tells the class whether or not to use the system security libraries or an internal implementation. |