IPWorks 2020 JavaScript Edition

Questions / Feedback?

SMTP Class

Properties   Methods   Events   Configuration Settings   Errors  

The SMTP Class is used to send Internet mail using the SMTP protocol (the Internet mail standard).

Syntax

ipworks.smtp()

Remarks

The SMTP Class supports both plaintext and SSL/TLS connections (RFC 2487). When connecting over SSL/TLS the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL related settings are also supported via the Config method.

The SMTP Class implements a standard SMTP client as specified in RFC 821. It has a simple plug-and-play interface. It contains a number of properties like SendTo, Subject, From, Cc, BCc, etc. that map directly to the internet mail message headers with the same name (RFC 822). The message text is set in MessageText. Messages are sent by calling the Send method.

The class supports message delivery to multiple recipients through the SendTo, Cc, and BCc properties. Simply specify the destination email addresses separated by commas.

The interface of the class is open-ended. New features, including MIME attachments can be supported by using the OtherHeaders property.

A number of events provide feedback during the operation of the class. The Transfer event is fired during message delivery to show the number of bytes delivered. The PITrail event traces the commands that are sent to the server and the respective replies.

Property List


The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

AllowExtensionsA switch allowing the class to use ESMTP features (SMTP extensions).
AuthMechanismUsed when connecting to the mail server.
BCcA comma separated list of addresses for blind carbon copies (optional).
CcA comma separated list of addresses for carbon copies (optional).
CommandUsed to send additional commands directly to the server.
ConnectedShows whether the class is connected.
DeliveryNotificationToEmail address to which to send a delivery notification.
FirewallA set of properties related to firewall access.
FromThe email address of the sender (required).
IdleThe current status of the class.
ImportanceImportance of the mail message (optional).
LastReplyThe last reply from the server.
LocalHostThe name of the local host or user-assigned IP interface through which connections are initiated or accepted.
MailPortThe server port for SMTP (default 25).
MailServerThe name or address of a mail server (mail relay).
MessageProvides a way to set the raw message content.
MessageDateDate of the mail message (optional).
MessageHeadersCollection of RFC822-encoded headers of the message.
MessageHeadersStringString representation of RFC822-encoded headers of the message.
MessageIdThe Message Identifier for the message.
MessageRecipientsThe collection of recipients of the message.
MessageTextThe full text of the message to send (without headers).
OtherHeadersAn RFC 822 compliant string consisting of extra headers.
PasswordA password for logon to the MailServer .
PriorityPriority of the mail message (optional).
ReadReceiptToEmail address to send a read receipt to.
ReplyToA mail address to which to reply (optional).
ReturnPathSets the Return-Path to be used for sending email.
SendToA comma separated list of addresses for destinations (required).
SensitivitySensitivity of the mail message (optional).
SSLAcceptServerCertInstructs the class to unconditionally accept the server certificate that matches the supplied certificate.
SSLCertThe certificate to be used during SSL negotiation.
SSLEnabledWhether TLS/SSL is enabled.
SSLServerCertThe server certificate for the last established connection.
SSLStartModeDetermines how the class starts the SSL negotiation.
SubjectThe subject of the mail message (optional).
TimeoutA timeout for the class.
UserA user identifier to login as in the MailServer .

Method List


The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

ConfigSets or retrieves a configuration setting.
ConnectConnects to the mail relay and sends the SMTP HELO command.
DisconnectDisconnects from the SMTP server.
DoEventsProcesses events from the internal message queue.
ExpandAsks the MailServer to expand a name or mailing list.
InterruptInterrupt the current method.
ProcessQueueSends the messages which have previously been queued into QueueDir .
QueueQueues the message into QueueDir .
ResetReset the class.
ResetHeadersResets all the message headers to empty.
SendSends the current message.
SendToTerminalAndEmailSends to terminal and email.
SendToTerminalOnlySends to terminal only.
SendToTerminalOrEmailSends to terminal or email.
VerifySends a Verification request to the SMTP server.

Event List


The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

ConnectionStatusFired to indicate changes in connection state.
EndTransferFired when the message text completes transferring.
ErrorInformation about errors during data delivery.
ExpandFired for every email address returned by the server when the Expand method is called.
PITrailTraces the commands sent to the mail server, and the respective replies.
SSLServerAuthenticationFired after the server presents its certificate to the client.
SSLStatusShows the progress of the secure connection.
StartTransferFired when the message text starts transferring.
TransferFired while the message text gets transferred to MailServer .

Configuration Settings


The following is a list of configuration settings for the class with short descriptions. Click on the links for further details.

AllowEmptyToIf set to True, then the SendTo property is not required.
AuthorizationIdentityThe value to use as the authorization identity when SASL authentication is used.
CharsetWhen set, the message headers will be encoded using the specified Charset.
HelloThe argument for HELO (herald) command to the server (defaults to local host name).
KeepQueueIf set to True, queued files are not deleted after a successful send.
MaxHeaderLengthMaximum length for headers to avoid line folding (default 80).
MessageHeadersStringString representation of RFC822-encoded headers of the message.
MessageIdAlgorithmDetermines the algorithm used to hash the random MessageId.
OtherHeadersAn RFC 822 compliant string consisting of extra headers.
ReturnPathSets the Return-Path to be used for sending email.
SendRSETWhether to send RSET command.
StopOnBccErrorsInstructs the class to stop sending the message if the server does not acknowledge any of the BCCs.
StopOnCcErrorsInstructs the class to stop sending the message if the server does not acknowledge any of the CCs.
StopOnToErrorsInstructs the class to stop sending the message if the server does not acknowledge any of the TOs.
TransferTextThe current portion of the message being sent.
ConnectionTimeoutSets a separate timeout value for establishing a connection.
FirewallAutoDetectTells the class whether or not to automatically detect and use firewall system settings, if available.
FirewallHostName or IP address of firewall (optional).
FirewallPasswordPassword to be used if authentication is to be used when connecting through the firewall.
FirewallPortThe TCP port for the FirewallHost;.
FirewallTypeDetermines the type of firewall to connect through.
FirewallUserA user name if authentication is to be used connecting through a firewall.
KeepAliveIntervalThe retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTimeThe inactivity time in milliseconds before a TCP keep-alive packet is sent.
LingerWhen set to True, connections are terminated gracefully.
LingerTimeTime in seconds to have the connection linger.
LocalHostThe name of the local host through which connections are initiated or accepted.
LocalPortThe port in the local host where the class binds.
MaxLineLengthThe maximum amount of data to accumulate when no EOL is found.
MaxTransferRateThe transfer rate limit in bytes per second.
ProxyExceptionsListA semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAliveDetermines whether or not the keep alive socket option is enabled.
TcpNoDelayWhether or not to delay when sending packets.
UseIPv6Whether to use IPv6.
LogSSLPacketsControls whether SSL packets are logged when using the internal security API.
OpenSSLCADirThe path to a directory containing CA certificates.
OpenSSLCAFileName of the file containing the list of CA's trusted by your application.
OpenSSLCipherListA string that controls the ciphers to be used by SSL.
OpenSSLPrngSeedDataThe data to seed the pseudo random number generator (PRNG).
ReuseSSLSessionDetermines if the SSL session is reused.
SSLAcceptAnyServerCertWhether to trust any certificate presented by the server.
SSLCACertsA newline separated list of CA certificate to use during SSL client authentication.
SSLCipherStrengthThe minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuitesThe cipher suite to be used in an SSL negotiation.
SSLEnabledProtocolsUsed to enable/disable the supported security protocols.
SSLEnableRenegotiationWhether the renegotiation_info SSL extension is supported.
SSLIncludeCertChainWhether the entire certificate chain is included in the SSLServerAuthentication event.
SSLNegotiatedCipherReturns the negotiated ciphersuite.
SSLNegotiatedCipherStrengthReturns the negotiated ciphersuite strength.
SSLNegotiatedCipherSuiteReturns the negotiated ciphersuite.
SSLNegotiatedKeyExchangeReturns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrengthReturns the negotiated key exchange algorithm strength.
SSLNegotiatedVersionReturns the negotiated protocol version.
SSLProviderThe name of the security provider to use.
SSLSecurityFlagsFlags that control certificate verification.
SSLServerCACertsA newline separated list of CA certificate to use during SSL server certificate validation.
TLS12SignatureAlgorithmsDefines the allowed TLS 1.2 signature algorithms when UseInternalSecurityAPI is True.
TLS12SupportedGroupsThe supported groups for ECC.
TLS13KeyShareGroupsThe groups for which to pregenerate key shares.
TLS13SignatureAlgorithmsThe allowed certificate signature algorithms.
TLS13SupportedGroupsThe supported groups for (EC)DHE key exchange.
AbsoluteTimeoutDetermines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallDataUsed to send extra data to the firewall.
InBufferSizeThe size in bytes of the incoming queue of the socket.
OutBufferSizeThe size in bytes of the outgoing queue of the socket.
BuildInfoInformation about the product's build.
CodePageThe system code page used for Unicode to Multibyte translations.
LicenseInfoInformation about the current license.
UseInternalSecurityAPITells the class whether or not to use the system security libraries or an internal implementation.

Copyright (c) 2022 /n software inc. - All rights reserved.
IPWorks 2020 JavaScript Edition - Version 20.0 [Build 8292]