IPDaemon Component

Properties Methods Events Configuration Settings Errors

The IPDaemon Component is a generic TCP server component based on an asynchronous, event-driven architecture. It is designed to balance the load between connections for a fast, powerful server.

Syntax

TipwIPDaemon

Remarks

The IPDaemon Component supports both plaintext and SSL/TLS connections. When connecting over SSL/TLS the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL related settings are also supported via the Config method. The SSLCert properties are used to select a certificate for the server (please note that a valid certificate MUST be selected before the server can function).

IPDaemon is the server complement of IPPort (which is used to create client applications). They share a common design philosophy and interface. We expect you will find IPDaemon as easy to use as IPPort.

By default, each instance of IPDaemon can handle up to 1,000 simultaneous incoming connections (this number may be increased up to 100,000 or decreased to a lower value by using the MaxConnections configuration setting).

The connections are identified by a ConnectionId, an id generated by the component to identify each connection. This id is unique to each connection. IPDaemon's events also have ConnectionId as a parameter to identify the connection they relate to.

Our main goal in designing IPDaemon was to make it easy to use without sacrificing performance. The component has a minimum of properties, and six events: ConnectionRequest, Connected, DataIn, Disconnected, ReadyToSend, and Error.

IPDaemon can start to listen on a port by setting the Listening property to True. When a remote host asks for a connection, the ConnectionRequest event is fired. At that point, the connection can either be accepted or rejected. If the connection is accepted, a ConnectionId is assigned, and communication can start. From this point on, the operation is very similar to IPPort. Data is sent by assigning the data string to the DataToSend property. The address and port of the incoming connection can be found by querying the RemoteHost and RemotePort properties.

Note: Server components are designed to process events as they occur. To ensure events are processed in a timely manner DoEvents should be called in a loop after the server is started.

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.


ConnectionBacklog	The maximum number of pending connections maintained by the TCP/IP subsystem.
ConnectionCount	The number of records in the arrays.
AcceptData	Setting this property to False, temporarily disables data reception (and the DataIn event) on the connection.
BytesSent	This property shows how many bytes were sent after the last assignment to DataToSend .
Connected	This property is used to disconnect individual connections or to show their status.
ConnectionId	This property contains an identifier generated by the component to identify each connection.
DataToSend	This property contains a string of data to be sent to the remote host.
EOL	The EOL property is used to define boundaries in the input stream using the value of the property.
IdleTimeout	This property contains the idle timeout for this connection.
LocalAddress	This property shows the IP address of the interface through which the connection is passing.
ReadyToSend	This indicates whether the component is ready to send data.
RecordLength	If set to a positive value, this setting defines the length of the data records to be received.
RemoteHost	This property shows the IP address of the remote host through which the connection is coming.
RemotePort	This property shows the Transmission Control Protocol (TCP) port on the remote host through which the connection is coming.
SingleLineMode	This property shows the special mode for line-oriented protocols.
Timeout	This property specifies a timeout for the component.
UserData	The UserData property holds connection-specific user-specified data.
DefaultEOL	A default EOL value to be used by incoming connections.
DefaultIdleTimeout	The default idle timeout for inactive clients.
DefaultMaxLineLength	The default maximum line length value for inbound connections.
DefaultSingleLineMode	Tells the component whether or not to treat new connections as line-oriented.
DefaultTimeout	An initial timeout value to be used by incoming connections.
KeepAlive	When True, KEEPALIVE packets are enabled (for long connections).
Linger	When set to True, connections are terminated gracefully.
Listening	If True, the component accepts incoming connections on LocalPort.
LocalHost	The name of the local host or user-assigned IP interface through which connections are initiated or accepted.
LocalPort	The TCP port in the local host where the component listens.
SSLAuthenticateClients	If true, the server asks the client(s) for a certificate.
SSLCertEncoded	This is the certificate (PEM/base64 encoded).
SSLCertStore	This is the name of the certificate store for the client certificate.
SSLCertStorePassword	If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
SSLCertStoreType	This is the type of certificate store for this certificate.
SSLCertSubject	This is the subject of the certificate used for client authentication.
SSLEnabled	Whether TLS/SSL is enabled.
SSLProvider	TBD.
SSLStartMode	Determines how the component starts the SSL negotiation.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.


ChangeRecordLength	Changes the length of received data records.
Config	Sets or retrieves a configuration setting.
Disconnect	Disconnect the specified client.
DoEvents	Processes events from the internal message queue.
Interrupt	Interrupts a synchronous send to the remote host.
PauseData	Pauses data reception.
ProcessData	Re-enables data reception after a call to PauseData .
Reset	Reset the component.
Send	Sends binary data to the specified client.
SendBytes	Sends binary data to the specified client.
SendFile	Send file to the remote host.
SendLine	Sends a string followed by a newline.
SendText	Sends text to the specified client.
Shutdown	Shuts down the server.
StartListening	Starts listening for incoming connections.
StartSSL	Starts SSL negotiation on a connection.
StopListening	Stops listening for new connections.

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.


Connected	Fired immediately after a connection completes (or fails).
ConnectionRequest	Fired when a request for connection comes from a remote host.
DataIn	Fired when data comes in.
Disconnected	Fired when a connection is closed.
Error	Information about errors during data delivery.
ReadyToSend	Fired when the component is ready to send data.
SSLClientAuthentication	Fired when the client presents its credentials to the server.
SSLConnectionRequest	Fires when an SSL connection is requested.
SSLStatus	Shows the progress of the secure connection.

Configuration Settings

The following is a list of configuration settings for the component with short descriptions. Click on the links for further details.


AllowedClients	A comma-separated list of host names or IP addresses that can access the component.
BindExclusively	Whether or not the component considers a local port reserved for exclusive use.
DefaultConnectionTimeout	The inactivity timeout applied to the SSL handshake.
InBufferSize	The size in bytes of the incoming queue of the socket.
KeepAliveInterval	The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTime	The inactivity time in milliseconds before a TCP keep-alive packet is sent.
MaxConnections	The maximum number of connections available.
OutBufferSize	The size in bytes of the outgoing queue of the socket.
TcpNoDelay	Whether or not to delay when sending packets.
UseIPv6	Whether to use IPv6.
LogSSLPackets	Controls whether SSL packets are logged when using the internal security API.
OpenSSLCADir	The path to a directory containing CA certificates.
OpenSSLCAFile	Name of the file containing the list of CA's trusted by your application.
OpenSSLCipherList	A string that controls the ciphers to be used by SSL.
OpenSSLPrngSeedData	The data to seed the pseudo random number generator (PRNG).
ReuseSSLSession	Determines if the SSL session is reused.
SSLCACerts	A newline separated list of CA certificate to use during SSL client authentication.
SSLCheckCRL	Whether to check the Certificate Revocation List for the server certificate.
SSLCipherStrength	The minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuites	The cipher suite to be used in an SSL negotiation.
SSLEnabledProtocols	Used to enable/disable the supported security protocols.
SSLEnableRenegotiation	Whether the renegotiation_info SSL extension is supported.
SSLIncludeCertChain	Whether the entire certificate chain is included in the SSLServerAuthentication event.
SSLKeyLogFile	The location of a file where per-session secrets are written for debugging purposes.
SSLNegotiatedCipher	Returns the negotiated ciphersuite.
SSLNegotiatedCipherStrength	Returns the negotiated ciphersuite strength.
SSLNegotiatedCipherSuite	Returns the negotiated ciphersuite.
SSLNegotiatedKeyExchange	Returns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrength	Returns the negotiated key exchange algorithm strength.
SSLNegotiatedProtocol	Returns the negotiated protocol version.
SSLProvider	The name of the security provider to use.
SSLSecurityFlags	Flags that control certificate verification.
SSLServerCACerts	A newline separated list of CA certificate to use during SSL server certificate validation.
TLS12SignatureAlgorithms	Defines the allowed TLS 1.2 signature algorithms when UseInternalSecurityAPI is True.
TLS12SupportedGroups	The supported groups for ECC.
TLS13KeyShareGroups	The groups for which to pregenerate key shares.
TLS13Provider	The TLS 1.3 implementation to be used.
TLS13SignatureAlgorithms	The allowed certificate signature algorithms.
TLS13SupportedGroups	The supported groups for (EC)DHE key exchange.
BuildInfo	Information about the product's build.
CodePage	The system code page used for Unicode to Multibyte translations.
LicenseInfo	Information about the current license.
UseInternalSecurityAPI	Tells the component whether or not to use the system security libraries or an internal implementation.

ConnectionBacklog Property (IPDaemon Component)

The maximum number of pending connections maintained by the TCP/IP subsystem.

Syntax

__property int ConnectionBacklog = { read=FConnectionBacklog, write=FSetConnectionBacklog };

Default Value

Remarks

This property contains the maximum number of pending connections maintained by the TCP/IP subsystem. This value reflects the SOMAXCON option for the main listening socket. The default value for most systems is 5. You may set this property to a larger value if the server is expected to receive a large number of connections, and queuing them is desirable.

This property is not available at design time.

Data Type

Integer

ConnectionCount Property (IPDaemon Component)

The number of records in the arrays.

Syntax

__property int ConnectionCount = { read=FConnectionCount };

Default Value

Remarks

This property controls the size of the following arrays:

AcceptData
BytesSent
Connected
ConnectionId
DataToSend
EOL
IdleTimeout
LocalAddress
ReadyToSend
RecordLength
RemoteHost
RemotePort
SingleLineMode
SSLCertEncoded
SSLCertStore
SSLCertStorePassword
SSLCertStoreType
SSLCertSubject
Timeout
UserData

This property is read-only and not available at design time.

Data Type

Integer

AcceptData Property (IPDaemon Component)

Setting this property to False, temporarily disables data reception (and the DataIn event) on the connection.

Syntax

__property bool AcceptData[int ConnectionId] = { read=FAcceptData, write=FSetAcceptData };

Default Value

True

Remarks

Setting this property to False, temporarily disables data reception (and the DataIn event) on the connection. Setting this to True, re-enables data reception.

Note: It is recommended to use the PauseData or ProcessData method instead of setting this property.

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the ConnectionCount property.

This property is not available at design time.

Data Type

Boolean

BytesSent Property (IPDaemon Component)

This property shows how many bytes were sent after the last assignment to DataToSend .

Syntax

__property int BytesSent[int ConnectionId] = { read=FBytesSent };

Default Value

Remarks

This property shows how many bytes were sent after the last assignment to DataToSend. Please check DataToSend for more information.

Note: This property will always return 0 when the component is operating in the synchronous mode (i.e., the Timeout property is set to a positive value).

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the ConnectionCount property.

This property is read-only and not available at design time.

Data Type

Integer

Connected Property (IPDaemon Component)

This property is used to disconnect individual connections or to show their status.

Syntax

__property bool Connected[int ConnectionId] = { read=FConnected, write=FSetConnected };

Default Value

False

Remarks

This property is used to disconnect individual connections or to show their status.

The Connected property may be set to false to close the connection.

Connected also shows the status of a particular connection (connected/disconnected).

How and when the connection is closed is controlled by the Linger property. Please refer to its description for more information.

Note: It is recommended to use the Connect or Disconnect method instead of setting this property.

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the ConnectionCount property.

This property is not available at design time.

Data Type

Boolean

ConnectionId Property (IPDaemon Component)

This property contains an identifier generated by the component to identify each connection.

Syntax

__property String ConnectionId[int ConnectionId] = { read=FConnectionId };

Default Value

Remarks

This property contains an identifier generated by the component to identify each connection. This identifier is unique to this connection.

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the ConnectionCount property.

This property is read-only and not available at design time.

Data Type

String

DataToSend Property (IPDaemon Component)

This property contains a string of data to be sent to the remote host.

Syntax

__property String DataToSend[int ConnectionId] = { write=FSetDataToSend };
__property DynamicArray<Byte> DataToSendB[int ConnectionId] = { write=FSetDataToSendB };

Default Value

Remarks

This property contains a string of data to be sent to the remote host. It is a write-only property.

Assigning a string to the DataToSend makes the component send the string to the remote host. The Send method provides similar functionality.

When Timeout is set to 0, the component will behave asynchronously. If you are sending data to the remote host faster than it can process it, or faster than the network's bandwidth allows, the outgoing queue might fill up. When this happens, the operation raises the exception with errorcode 10035 and message "[10035] Operation would block" (WSAEWOULDBLOCK). You can handle this exception, and then try to send the data again. The BytesSent property shows how many bytes were sent (if any). If 0 bytes were sent, then you can wait for the ReadyToSend event before attempting to send data again. (However, please note that ReadyToSend is not fired when part of the data is successfully sent).

Note: It is recommended to use the Send or SendBytes method instead of setting this property.

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the ConnectionCount property.

This property is write-only and not available at design time.

Data Type

Byte Array

EOL Property (IPDaemon Component)

The EOL property is used to define boundaries in the input stream using the value of the property.

Syntax

__property String EOL[int ConnectionId] = { read=FEOL, write=FSetEOL };
__property DynamicArray<Byte> EOLB[int ConnectionId] = { read=FEOLB, write=FSetEOLB };

Default Value

Remarks

The EOL property is used to define boundaries in the input stream using the value of the property.

The EOL property is especially useful with ASCII files. By setting it to CRLF ("\r\n") , the incoming ASCII text stream can be split into lines. In this case, one event is fired for each line received (as well as in packet boundaries). The CRLF ("\r\n") . bytes are discarded.

The EOL property is a binary string. This means that it can be more than one byte long, and it can contain NULL bytes.

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the ConnectionCount property.

This property is not available at design time.

Data Type

Byte Array

IdleTimeout Property (IPDaemon Component)

This property contains the idle timeout for this connection.

Syntax

__property int IdleTimeout[int ConnectionId] = { read=FIdleTimeout, write=FSetIdleTimeout };

Default Value

Remarks

This property contains the idle timeout for this connection. This property is similar to DefaultIdleTimeout but may be set on a per-connection basis to override DefaultIdleTimeout. This property specifies the idle timeout (in seconds) for the connected client. When set to a positive value, the component will disconnect idle clients after the specified timeout.

This applies only to clients that have not sent to received data within the specified number of seconds.

If set to 0 (default), no idle timeout is applied.

Note: DoEvents must be called for the component to check existing connections.

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the ConnectionCount property.

This property is not available at design time.

Data Type

Integer

LocalAddress Property (IPDaemon Component)

This property shows the IP address of the interface through which the connection is passing.

Syntax

__property String LocalAddress[int ConnectionId] = { read=FLocalAddress };

Default Value

Remarks

This property shows the IP address of the interface through which the connection is passing.

LocalAddress is important for multihomed hosts so that it can be used to find the particular network interface through which an individual connection is going.

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the ConnectionCount property.

This property is read-only and not available at design time.

Data Type

String

ReadyToSend Property (IPDaemon Component)

This indicates whether the component is ready to send data.

Syntax

__property bool ReadyToSend[int ConnectionId] = { read=FReadyToSend };

Default Value

false

Remarks

This indicates whether the component is ready to send data.

This property indicates that the underlying TCP/IP subsystem is ready to accept data. This is True after a client connects but will become False after a failed DataToSend.

After a failed DataToSend, the ReadyToSend event will fire and this property will be True when data can be sent again.

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the ConnectionCount property.

This property is read-only and not available at design time.

Data Type

Boolean

RecordLength Property (IPDaemon Component)

If set to a positive value, this setting defines the length of the data records to be received.

Syntax

__property int RecordLength[int ConnectionId] = { read=FRecordLength, write=FSetRecordLength };

Default Value

Remarks

If set to a positive value, this setting defines the length of the data records to be received. The component will accumulate data until RecordLength is reached and only then will fire the DataIn event with the data of length RecordLength. This allows data to be received as records of known length. This value can be changed at any time, including within the DataIn event.

A value of 0 (default) means this setting is not used.

Note: It is recommended to use the ChangeRecordLength method instead of setting this property.

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the ConnectionCount property.

This property is not available at design time.

Data Type

Integer

RemoteHost Property (IPDaemon Component)

This property shows the IP address of the remote host through which the connection is coming.

Syntax

__property String RemoteHost[int ConnectionId] = { read=FRemoteHost };

Default Value

Remarks

This property shows the IP address of the remote host through which the connection is coming.

The connection must be valid or an error will be fired.

If the component is configured to use a SOCKS firewall, the value assigned to this property may be preceded with an "*". If this is the case, the host name is passed to the firewall unresolved and the firewall performs the DNS resolution.

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the ConnectionCount property.

This property is read-only and not available at design time.

Data Type

String

RemotePort Property (IPDaemon Component)

This property shows the Transmission Control Protocol (TCP) port on the remote host through which the connection is coming.

Syntax

__property int RemotePort[int ConnectionId] = { read=FRemotePort };

Default Value

Remarks

This property shows the Transmission Control Protocol (TCP) port on the remote host through which the connection is coming.

The connection must be valid or an error will be fired.

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the ConnectionCount property.

This property is read-only and not available at design time.

Data Type

Integer

SingleLineMode Property (IPDaemon Component)

This property shows the special mode for line-oriented protocols.

Syntax

__property bool SingleLineMode[int ConnectionId] = { read=FSingleLineMode, write=FSetSingleLineMode };

Default Value

False

Remarks

This property shows the special mode for line-oriented protocols. When SingleLineMode is True, the component treats the incoming data stream as lines separated by carriage return (CR), line feed (LF), or CRLF. The EOL property is ignored.

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the ConnectionCount property.

This property is not available at design time.

Data Type

Boolean

Timeout Property (IPDaemon Component)

This property specifies a timeout for the component.

Syntax

__property int Timeout[int ConnectionId] = { read=FTimeout, write=FSetTimeout };

Default Value

Remarks

This property specifies a timeout for the component.

If the Timeout property is set to 0, all operations return immediately, potentially failing with a WOULDBLOCK error if data cannot be sent immediately.

If Timeout is set to a positive value, data is sent in a blocking manner and the component will wait for the operation to complete before returning control. The component will handle any potential WOULDBLOCK errors internally and automatically retry the operation for a maximum of Timeout seconds.

The component will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the component raises an exception.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 0 (asynchronous operation).

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the ConnectionCount property.

This property is not available at design time.

Data Type

Integer

UserData Property (IPDaemon Component)

The UserData property holds connection-specific user-specified data.

Syntax

__property String UserData[int ConnectionId] = { read=FUserData, write=FSetUserData };
__property DynamicArray<Byte> UserDataB[int ConnectionId] = { read=FUserDataB, write=FSetUserDataB };

Default Value

Remarks

The UserData property holds connection-specific user-specified data.

User-specified data may be set or retrieved at any point while the connection is valid. This provides a simple way to associate arbitrary data with a specific connection.

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the ConnectionCount property.

This property is not available at design time.

Data Type

Byte Array

DefaultEOL Property (IPDaemon Component)

A default EOL value to be used by incoming connections.

Syntax

__property String DefaultEOL = { read=FDefaultEOL, write=FSetDefaultEOL };
__property DynamicArray<Byte> DefaultEOLB = { read=FDefaultEOLB, write=FSetDefaultEOLB };

Default Value

Remarks

This property contains a default End Of Line (EOL) value to be used by incoming connections. Once the component accepts and establishes an inbound connection, it will set that connection's EOL to the value in this property. By default, this value is empty (""), meaning that data will be fired as it is received.

Data Type

Byte Array

DefaultIdleTimeout Property (IPDaemon Component)

The default idle timeout for inactive clients.

Syntax

__property int DefaultIdleTimeout = { read=FDefaultIdleTimeout, write=FSetDefaultIdleTimeout };

Default Value

Remarks

This property specifies the idle timeout (in seconds) for clients. When set to a positive value the component will disconnect idle clients after the specified timeout.

This only applies to clients that have not sent or received data within DefaultIdleTimeout seconds.

If set to 0 (default) no idle timeout is applied.

Note: DoEvents must be called in order for the component to check existing connections.

Data Type

Integer

DefaultMaxLineLength Property (IPDaemon Component)

The default maximum line length value for inbound connections.

Syntax

__property int DefaultMaxLineLength = { read=FDefaultMaxLineLength, write=FSetDefaultMaxLineLength };

Default Value

2048

Remarks

This property controls the default size of an internal buffer which holds received data while waiting for an end-of-line (EOL) string.

The minimum value for this property is 256 bytes. The default value is 2048 bytes.

Data Type

Integer

DefaultSingleLineMode Property (IPDaemon Component)

Tells the component whether or not to treat new connections as line-oriented.

Syntax

__property bool DefaultSingleLineMode = { read=FDefaultSingleLineMode, write=FSetDefaultSingleLineMode };

Default Value

False

Remarks

This property instructs the component whether or not to treat newly established connections as line-oriented protocols. If this value is True, newly accepted connections will read the incoming data stream as lines separated by CRLF, CR, or LF, and will ignore the end of lines (EOLs).

Data Type

Boolean

DefaultTimeout Property (IPDaemon Component)

An initial timeout value to be used by incoming connections.

Syntax

__property int DefaultTimeout = { read=FDefaultTimeout, write=FSetDefaultTimeout };

Default Value

Remarks

This property is used by the component to set the operational timeout value of all inbound connections once they are established.

By default, the timeout is 0, meaning that all inbound connections will behave asynchronously.

Data Type

Integer

KeepAlive Property (IPDaemon Component)

When True, KEEPALIVE packets are enabled (for long connections).

Syntax

__property bool KeepAlive = { read=FKeepAlive, write=FSetKeepAlive };

Default Value

False

Remarks

This property enables the SO_KEEPALIVE option on the incoming connections. This option prevents long connections from timing out in case of inactivity.

Please note that system TCP/IP stack implementations are not required to support SO_KEEPALIVE.

This property is shared among incoming connections. When the property is set, the corresponding value is set for incoming connections as they are accepted. Existing connections are not modified.

Data Type

Boolean

Linger Property (IPDaemon Component)

When set to True, connections are terminated gracefully.

Syntax

__property bool Linger = { read=FLinger, write=FSetLinger };

Default Value

True

Remarks

This property controls how a connection is closed. The default is True. In this case the connection is closed only after all the data is sent. Setting it to False forces an abrupt (hard) disconnection. Any data that was in the sending queue may be lost.

The default behavior (which is also the default mode for stream sockets) might result in an indefinite delay in closing the connection. Although the component returns control immediately, the system might indefinitely hold system resources until all pending data is sent (even after your application closes). This means that valuable system resources might be wasted.

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you have sent (by a client acknowledgment, for example), setting this property to False might be the appropriate course of action.

This property is shared among incoming connections. When the property is set, the corresponding value is set for incoming connections as they are accepted. Existing connections are not modified.

Data Type

Boolean

Listening Property (IPDaemon Component)

If True, the component accepts incoming connections on LocalPort.

Syntax

__property bool Listening = { read=FListening, write=FSetListening };

Default Value

False

Remarks

Use this property to make the component 'listen' (accept connections) on the port specified by the LocalPort property. Setting this property to False will make the component stop listening (please note that this does not close any existing connections).

Note: It is recommended to use the StartListening or StopListening method instead of setting this property.

This property is not available at design time.

Data Type

Boolean

LocalHost Property (IPDaemon Component)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

__property String LocalHost = { read=FLocalHost, write=FSetLocalHost };

Default Value

Remarks

The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the component initiate connections (or accept in the case of server components) only through that interface.

If the component is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

LocalPort Property (IPDaemon Component)

The TCP port in the local host where the component listens.

Syntax

__property int LocalPort = { read=FLocalPort, write=FSetLocalPort };

Default Value

Remarks

This property must be set before the component can start listening. If its value is 0, then the TCP/IP subsystem picks a port number at random. The port number can be found by checking the value of this property after the component is listening (ie. after successfully assigning True to the Listening property).

The service port is not shared among servers so two components cannot be listening on the same port at the same time.

Data Type

Integer

SSLAuthenticateClients Property (IPDaemon Component)

If true, the server asks the client(s) for a certificate.

Syntax

__property bool SSLAuthenticateClients = { read=FSSLAuthenticateClients, write=FSetSSLAuthenticateClients };

Default Value

false

Remarks

This property is used in conjunction with the SSLClientAuthentication event. Please refer to the documentation of the SSLClientAuthentication event for details.

Data Type

Boolean

SSLCertEncoded Property (IPDaemon Component)

This is the certificate (PEM/base64 encoded).

Syntax

__property String SSLCertEncoded = { read=FSSLCertEncoded, write=FSetSSLCertEncoded };
__property DynamicArray<Byte> SSLCertEncodedB = { read=FSSLCertEncodedB, write=FSetSSLCertEncodedB };

Default Value

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertStore Property (IPDaemon Component)

This is the name of the certificate store for the client certificate.

Syntax

__property String SSLCertStore = { read=FSSLCertStore, write=FSetSSLCertStore };
__property DynamicArray<Byte> SSLCertStoreB = { read=FSSLCertStoreB, write=FSetSSLCertStoreB };

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

Data Type

Byte Array

SSLCertStorePassword Property (IPDaemon Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLCertStorePassword = { read=FSSLCertStorePassword, write=FSetSSLCertStorePassword };

Default Value

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (IPDaemon Component)

This is the type of certificate store for this certificate.

Syntax

__property TipwIPDaemonSSLCertStoreTypes SSLCertStoreType = { read=FSSLCertStoreType, write=FSetSSLCertStoreType };

enum TipwIPDaemonSSLCertStoreTypes {
  cstUser=0,

  cstMachine=1,

  cstPFXFile=2,

  cstPFXBlob=3,

  cstJKSFile=4,

  cstJKSBlob=5,

  cstPEMKeyFile=6,

  cstPEMKeyBlob=7,

  cstPublicKeyFile=8,

  cstPublicKeyBlob=9,

  cstSSHPublicKeyBlob=10,

  cstP7BFile=11,

  cstP7BBlob=12,

  cstSSHPublicKeyFile=13,

  cstPPKFile=14,

  cstPPKBlob=15,

  cstXMLFile=16,

  cstXMLBlob=17,

  cstJWKFile=18,

  cstJWKBlob=19,

  cstSecurityKey=20,

  cstBCFKSFile=21,

  cstBCFKSBlob=22,

  cstAuto=99

};

Default Value

cstUser

Remarks

This is the type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used the component will automatically determine the type. This property can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: this store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: this store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or base64-encoded) representing a certificate store in PFX (PKCS12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: this store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
20 (cstSecurityKey)	The certificate is present on a physical security key accessible via a PKCS11 interface. To use a security key the necessary data must first be collected using the CertMgr component. The ListStoreCertificates method may be called after setting CertStoreType to `cstSecurityKey`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS11 dll. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SSLCertStore and set SSLCertStorePassword to the PIN. Code Example: SSH Authentication with Security Key `certmgr.CertStoreType = CertStoreTypes.cstSecurityKey; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstSecurityKey, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: this store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: this store type is only available in Java and .NET.
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Data Type

Integer

SSLCertSubject Property (IPDaemon Component)

This is the subject of the certificate used for client authentication.

Syntax

__property String SSLCertSubject = { read=FSSLCertSubject, write=FSetSSLCertSubject };

Default Value

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properites are set. When this property is set, a search is performed in the current certificate store certificate with matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are displayed below.


Field	Meaning
CN	Common Name. This is commonly a host name like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma it must be quoted.

Data Type

String

SSLEnabled Property (IPDaemon Component)

Whether TLS/SSL is enabled.

Syntax

__property bool SSLEnabled = { read=FSSLEnabled, write=FSetSSLEnabled };

Default Value

False

Remarks

This setting specifies whether TLS/SSL is enabled in the component. When False (default) the component operates in plaintext mode. When True TLS/SSL is enabled.

TLS/SSL may also be enabled by setting SSLStartMode. Setting SSLStartMode will automatically update this property value.

This property is not available at design time.

Data Type

Boolean

SSLProvider Property (IPDaemon Component)

TBD.

Syntax

__property TipwIPDaemonSSLProviders SSLProvider = { read=FSSLProvider, write=FSetSSLProvider };

enum TipwIPDaemonSSLProviders {
  sslpAutomatic=0,

  sslpPlatform=1,

  sslpInternal=2

};

Default Value

sslpAutomatic

Remarks

TBD.

Data Type

Integer

SSLStartMode Property (IPDaemon Component)

Determines how the component starts the SSL negotiation.

Syntax

__property TipwIPDaemonSSLStartModes SSLStartMode = { read=FSSLStartMode, write=FSetSSLStartMode };

enum TipwIPDaemonSSLStartModes {
  sslAutomatic=0,

  sslImplicit=1,

  sslExplicit=2,

  sslNone=3

};

Default Value

sslNone

Remarks

The SSLStartMode property may have one of the following values:


0 (sslAutomatic)	If the remote port is set to the standard plaintext port of the protocol (where applicable), the component will behave the same as if SSLStartMode is set to sslExplicit. In all other cases, SSL negotiation will be implicit (sslImplicit).
1 (sslImplicit)	The SSL negotiation will start immediately after the connection is established.
2 (sslExplicit)	The component will first connect in plaintext, and then explicitly start SSL negotiation through a protocol command such as STARTTLS.
3 (sslNone - default)	No SSL negotiation, no SSL security. All communication will be in plaintext mode.

Data Type

Integer

ChangeRecordLength Method (IPDaemon Component)

Changes the length of received data records.

Syntax

void __fastcall ChangeRecordLength(int ConnectionId, int RecordLength);

Remarks

This method defines the length of data records to be received (in bytes) for the specified ConnectionId.

If RecordLength is set to a positive value, the component will accumulate data until RecordLength bytes of data is received and only then fire the DataIn event with data of length RecordLength. This allows data to be received as records of known length. This method can be called at any time to change the record length, including within the DataIn event.

A value of 0 (default) means this functionality is not used.

Config Method (IPDaemon Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Disconnect Method (IPDaemon Component)

Disconnect the specified client.

Syntax

void __fastcall Disconnect(int ConnectionId);

Remarks

Calling this method will disconnect the client specified by the ConnectionId parameter.

DoEvents Method (IPDaemon Component)

Processes events from the internal message queue.

Syntax

void __fastcall DoEvents();

Remarks

When DoEvents is called, the component processes any available events. If no events are available, it waits for a preset period of time, and then returns.

Interrupt Method (IPDaemon Component)

Interrupts a synchronous send to the remote host.

Syntax

void __fastcall Interrupt(int ConnectionId);

Remarks

This property is called using the Connection Id if you wish to interrupt a connection and stop a file from uploading without disconnecting the client connected to the component. If you use SendFile to upload a file, the component will run synchronously on that Connection Id until it is completed.

PauseData Method (IPDaemon Component)

Pauses data reception.

Syntax

void __fastcall PauseData(int ConnectionId);

Remarks

This method pauses data reception for the connection identified by ConnectionId when called. While data reception is paused the DataIn event will not fire for the specified connection. Call ProcessData to re-enable data reception.

ProcessData Method (IPDaemon Component)

Re-enables data reception after a call to PauseData .

Syntax

void __fastcall ProcessData(int ConnectionId);

Remarks

This method re-enables data reception for the connection identified by ConnectionId after a previous call to PauseData. When PauseData is called the DataIn event will not fire for the specified connection. To re-enable data reception and allow DataIn to fire call this method.

Note: This method is only used after previously calling PauseData. It does not need to be called to process incoming data by default.

Reset Method (IPDaemon Component)

Reset the component.

Syntax

void __fastcall Reset();

Remarks

This method will reset the component's properties to their default values.

Send Method (IPDaemon Component)

Sends binary data to the specified client.

Syntax

void __fastcall Send(int ConnectionId, DynamicArray<Byte> Text);

Remarks

This method sends binary data to the client identified by ConnectionId. To send text use the SendText method instead.

When Timeout is set to 0 the component will behave asynchronously. If you are sending data to the remote host faster than it can process it, or faster than the network's bandwidth allows, the outgoing queue might fill up. When this happens, the operation raises the exception with errorcode 10035 and message "[10035] Operation would block" (WSAEWOULDBLOCK). You can handle this exception, and then try to send the data again. The BytesSent property shows how many bytes were sent (if any). If 0 bytes were sent, then you can wait for the ReadyToSend event before attempting to send data again. (However, please note that ReadyToSend is not fired when part of the data is successfully sent).

SendBytes Method (IPDaemon Component)

Sends binary data to the specified client.

Syntax

void __fastcall SendBytes(int ConnectionId, DynamicArray<Byte> Data);

Remarks

This method sends binary data to the client identified by ConnectionId. To send text use the SendText method instead.

SendFile Method (IPDaemon Component)

Send file to the remote host.

Syntax

void __fastcall SendFile(int ConnectionId, String FileName);

Remarks

This method sends the file to the client specified by the ConnectionId.

SendLine Method (IPDaemon Component)

Sends a string followed by a newline.

Syntax

void __fastcall SendLine(int ConnectionId, String Text);

Remarks

This method is used to send data with line-oriented protocols. The line is followed by CRLF ("\r\n") .

Please refer to the GetLine method and SingleLineMode property for more information.

SendText Method (IPDaemon Component)

Sends text to the specified client.

Syntax

void __fastcall SendText(int ConnectionId, String Text);

Remarks

This method sends text to the client identified by ConnectionId. To send binary data use the SendBytes method instead.

Shutdown Method (IPDaemon Component)

Shuts down the server.

Syntax

void __fastcall Shutdown();

Remarks

This method shuts down the server. Calling this method is equivalent to calling StopListening and then breaking every client connection by calling Disconnect.

StartListening Method (IPDaemon Component)

Starts listening for incoming connections.

Syntax

void __fastcall StartListening();

Remarks

This method begins listening for incoming connections on the port specified by LocalPort. Once listening events will fire as new clients connect and data is transferred.

To stop listening for new connections call StopListening. To stop listening for new connections and disconnect all existing clients call Shutdown.

StartSSL Method (IPDaemon Component)

Starts SSL negotiation on a connection.

Syntax

void __fastcall StartSSL(int ConnectionId);

Remarks

This method is used to start SSL negotiation on a plaintext connection. Please refer to the SSLStartMode property for more information.

Note that the Connected event will fire again after SSL negotiation is complete.

StopListening Method (IPDaemon Component)

Stops listening for new connections.

Syntax

void __fastcall StopListening();

Remarks

This method stops listening for new connections. After being called any new connection attempts will be rejected. Calling this method does not disconnect existing connections.

To stop listening and disconnect all existing clients call Shutdown instead.

Connected Event (IPDaemon Component)

Fired immediately after a connection completes (or fails).

Syntax

typedef struct {
  int ConnectionId;

  int StatusCode;

  String Description;

} TipwIPDaemonConnectedEventParams;

typedef void __fastcall (__closure *TipwIPDaemonConnectedEvent)(System::TObject* Sender, TipwIPDaemonConnectedEventParams *e);

__property TipwIPDaemonConnectedEvent OnConnected = { read=FOnConnected, write=FOnConnected };

Remarks

If the connection is made normally, StatusCode is 0, and Description is "OK".

If the connection fails, StatusCode has the error code returned by the system. Description contains a description of this code. The value of StatusCode is equal to the value of the system error.

Please refer to the Error Codes section for more information.

ConnectionRequest Event (IPDaemon Component)

Fired when a request for connection comes from a remote host.

Syntax

typedef struct {
  String Address;

  int Port;

  bool Accept;

} TipwIPDaemonConnectionRequestEventParams;

typedef void __fastcall (__closure *TipwIPDaemonConnectionRequestEvent)(System::TObject* Sender, TipwIPDaemonConnectionRequestEventParams *e);

__property TipwIPDaemonConnectionRequestEvent OnConnectionRequest = { read=FOnConnectionRequest, write=FOnConnectionRequest };

Remarks

This event indicates an incoming connection. The connection is accepted by default. Address and Port will contain information about remote host requesting the inbound connection. If you want to refuse it, you can set the Accept parameter to False.

DataIn Event (IPDaemon Component)

Fired when data comes in.

Syntax

typedef struct {
  int ConnectionId;

  String Text;
  DynamicArray<Byte> TextB;

  bool EOL;

} TipwIPDaemonDataInEventParams;

typedef void __fastcall (__closure *TipwIPDaemonDataInEvent)(System::TObject* Sender, TipwIPDaemonDataInEventParams *e);

__property TipwIPDaemonDataInEvent OnDataIn = { read=FOnDataIn, write=FOnDataIn };

Remarks

Trapping the DataIn event is your only chance to get the data coming from the other end of the connection specified by ConnectionId. The incoming data is provided through the Text parameter.

EOL indicates whether the EOL string was found at the end of Text or not. If the EOL string was found, then EOL is True.

If Text is part of data portion of length larger than either DefaultMaxLineLength or with no EOL strings in it, then EOL is False. Please note that this means that one or more DataIn events with EOL set to False can be received during a connection.

If the EOL property is "" (empty string), then EOL can be disregarded (it is always True).

Note that events are not re-entrant. Performing time consuming operations within this event will prevent it from firing again in a timely manner and may impact overall performance.

Disconnected Event (IPDaemon Component)

Fired when a connection is closed.

Syntax

typedef struct {
  int ConnectionId;

  int StatusCode;

  String Description;

} TipwIPDaemonDisconnectedEventParams;

typedef void __fastcall (__closure *TipwIPDaemonDisconnectedEvent)(System::TObject* Sender, TipwIPDaemonDisconnectedEventParams *e);

__property TipwIPDaemonDisconnectedEvent OnDisconnected = { read=FOnDisconnected, write=FOnDisconnected };

Remarks

If the connection is broken normally, StatusCode is 0, and Description is "OK".

If the connection is broken for any other reason, StatusCode has the error code returned by the system. Description contains a description of this code. The value of StatusCode is equal to the value of the system error.

Please refer to the Error Codes section for more information.

Error Event (IPDaemon Component)

Information about errors during data delivery.

Syntax

typedef struct {
  int ConnectionId;

  int ErrorCode;

  String Description;

} TipwIPDaemonErrorEventParams;

typedef void __fastcall (__closure *TipwIPDaemonErrorEvent)(System::TObject* Sender, TipwIPDaemonErrorEventParams *e);

__property TipwIPDaemonErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

ConnectionId indicates for which connection the error is applicable.

ReadyToSend Event (IPDaemon Component)

Fired when the component is ready to send data.

Syntax

typedef struct {
  int ConnectionId;

} TipwIPDaemonReadyToSendEventParams;

typedef void __fastcall (__closure *TipwIPDaemonReadyToSendEvent)(System::TObject* Sender, TipwIPDaemonReadyToSendEventParams *e);

__property TipwIPDaemonReadyToSendEvent OnReadyToSend = { read=FOnReadyToSend, write=FOnReadyToSend };

Remarks

The ReadyToSend event indicates that the underlying TCP/IP subsystem is ready to accept data after a failed DataToSend. The event is also fired immediately after a connection is established.

SSLClientAuthentication Event (IPDaemon Component)

Fired when the client presents its credentials to the server.

Syntax

typedef struct {
  int ConnectionId;

  String CertEncoded;
  DynamicArray<Byte> CertEncodedB;

  String CertSubject;

  String CertIssuer;

  String Status;

  bool Accept;

} TipwIPDaemonSSLClientAuthenticationEventParams;

typedef void __fastcall (__closure *TipwIPDaemonSSLClientAuthenticationEvent)(System::TObject* Sender, TipwIPDaemonSSLClientAuthenticationEventParams *e);

__property TipwIPDaemonSSLClientAuthenticationEvent OnSSLClientAuthentication = { read=FOnSSLClientAuthentication, write=FOnSSLClientAuthentication };

Remarks

This is where the server can decide whether to continue or not. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether to continue or not.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string "OK").

SSLConnectionRequest Event (IPDaemon Component)

Fires when an SSL connection is requested.

Syntax

typedef struct {
  int ConnectionId;

  String SupportedCipherSuites;

  String SupportedSignatureAlgs;

  int CertStoreType;

  String CertStore;

  String CertPassword;

  String CertSubject;

} TipwIPDaemonSSLConnectionRequestEventParams;

typedef void __fastcall (__closure *TipwIPDaemonSSLConnectionRequestEvent)(System::TObject* Sender, TipwIPDaemonSSLConnectionRequestEventParams *e);

__property TipwIPDaemonSSLConnectionRequestEvent OnSSLConnectionRequest = { read=FOnSSLConnectionRequest, write=FOnSSLConnectionRequest };

Remarks

This event fires when an SSL connection is requested and provides an opportunity to select an alternative certificate to the connecting client.

Note: This setting is only applicable when UseInternalSecurityAPI is set to True.

This event allows the component to be configured to use both RSA and ECDSA certificates depending on the connecting client's capabilities.

ConnectionId is the connection Id of the client requesting the connection.

SupportedCipherSuites is a comma separated list of cipher suites that the client supports.

SupportedSignatureAlgs is a comma separated list of certificate signature algorithms that the client supports.

CertStoreType is the store type of the alternate certificate to use for this connection. The component supports both public and private keys in a variety of formats. When the cstAuto value is used the component will automatically determine the type. This property can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: this store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: this store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or base64-encoded) representing a certificate store in PFX (PKCS12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: this store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
20 (cstSecurityKey)	The certificate is present on a physical security key accessible via a PKCS11 interface. To use a security key the necessary data must first be collected using the CertMgr component. The ListStoreCertificates method may be called after setting CertStoreType to `cstSecurityKey`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS11 dll. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the and set to the PIN. Code Example: SSH Authentication with Security Key `certmgr.CertStoreType = CertStoreTypes.cstSecurityKey; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstSecurityKey, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: this store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: this store type is only available in Java and .NET.
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

CertStore is the store name or location of the alternate certificate to use for this connection.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

CertPassword is the password of the certificate store containing the alternate certificate to use for this connection.

CertSubject is the subject of the alternate certificate to use for this connection.

The special value * matches any subject and will select the first certificate in the store. The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are displayed below.


Field	Meaning
CN	Common Name. This is commonly a host name like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma it must be quoted.

SSLStatus Event (IPDaemon Component)

Shows the progress of the secure connection.

Syntax

typedef struct {
  int ConnectionId;

  String Message;

} TipwIPDaemonSSLStatusEventParams;

typedef void __fastcall (__closure *TipwIPDaemonSSLStatusEvent)(System::TObject* Sender, TipwIPDaemonSSLStatusEventParams *e);

__property TipwIPDaemonSSLStatusEvent OnSSLStatus = { read=FOnSSLStatus, write=FOnSSLStatus };

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

Configuration Settings (IPDaemon Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

IPDaemon Configuration Settings

AllowedClients: A comma-separated list of host names or IP addresses that can access the component.

This setting defines a comma-separated list of host names or IPv4 addresses that may access the component. The wildcard character "*" is supported. The default value is "*" and all connections are accepted.

When a client connects, the client's address is checked against the list defined here. If there is no match, the ConnectionRequest event fires with an Accept value set to False. If no action is taken within the ConnectionRequest event, the client will be disconnected.

BindExclusively: Whether or not the component considers a local port reserved for exclusive use.

If this is true (default), the component will bind to the local port with the ExclusiveAddressUse option set, meaning that nothing else can bind to the same port. Also the component will not be able to bind to local ports that are already in use by some other instance and attempts to do so will result in failure.

DefaultConnectionTimeout: The inactivity timeout applied to the SSL handshake.

This setting specifies the inactivity (in seconds) to apply to incoming SSL connections. When set to a positive value if the other end is unresponsive for the specified number of seconds the connection will timeout. This is not applicable to the entire handshake, only the inactivity of the connecting client during the handshake if a response is expected and none is received within the timeout window. The default value is 0 and no connection specific timeout is applied.

Note: This is only applicable to incoming SSL connections. This should only be set if there is a specific reason to do so.

InBufferSize: The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

InBufferSize is shared among incoming connections. When the property is set, the corresponding value is set for incoming connections as they are accepted. Existing connections are not modified.

KeepAliveInterval: The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgement is received from the remote host the keep-alive packet will be re-sent. This setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second. This setting is applicable to all connections.

Note: This value is not applicable in macOS.

KeepAliveTime: The inactivity time in milliseconds before a TCP keep-alive packet is sent.

By default the operating system will determine the time a connection is idle before a TCP keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases a shorter interval is more useful. Set this value to the desired interval in milliseconds. This setting is applicable to all connections.

MaxConnections: The maximum number of connections available.

The maximum number of connections available. This property must be set before Listening is set to True, and once set, it can no longer be changed for the current instance of the component. The maximum value for this setting is 100,000 connections. Use this setting with caution. Extremely large values may impact performance. The default value is 1000.

Note: Unix/Linux operating systems limit the number of simultaneous connections to 1024.

OutBufferSize: The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize is shared among incoming connections. When the property is set, the corresponding value is set for incoming connections as they are accepted. Existing connections are not modified.

TcpNoDelay: Whether or not to delay when sending packets.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

UseIPv6: Whether to use IPv6.

When set to 0 (default), the component will use IPv4 exclusively. When set to 1, the component will use IPv6 exclusively. When set to 2, the component will listen for both IPv4 and IPv6 connections. If IPv6 is not available on the system, only IPv4 will be used. The default value is 0. Possible values are:


0	IPv4 Only
1	IPv6 Only
2	IPv6 and IPv4

SSL Configuration Settings

LogSSLPackets: Controls whether SSL packets are logged when using the internal security API.

When the UseInternalSecurityAPI configuration setting is True, this setting controls whether SSL packets should be logged. By default, this setting is False, as it is only useful for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this setting has no effect if UseInternalSecurityAPI is False.

OpenSSLCADir: The path to a directory containing CA certificates.

This functionality is available only when the provider is OpenSSL.

The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g. 9d66eef0.0, 9d66eef0.1 etc). OpenSSL recommends to use the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCAFile: Name of the file containing the list of CA's trusted by your application.

This functionality is available only when the provider is OpenSSL.

The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by

-----BEGIN CERTIFICATE-----

... (CA certificate in base64 encoding) ...

-----END CERTIFICATE-----

sequences. Before, between, and after the certificates text is allowed which can be used e.g. for descriptions of the certificates. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCipherList: A string that controls the ciphers to be used by SSL.

This functionality is available only when the provider is OpenSSL.

The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".

OpenSSLPrngSeedData: The data to seed the pseudo random number generator (PRNG).

This functionality is available only when the provider is OpenSSL.

By default OpenSSL uses the device file "/dev/urandom" to seed the PRNG and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.

ReuseSSLSession: Determines if the SSL session is reused.

If set to true, the component will reuse the context if and only if the following criteria are met:

The target host name is the same.
The system cache entry has not expired (default timeout is 10 hours).
The application process that calls the function is the same.
The logon session is the same.
The instance of the component is the same.

SSLCACerts: A newline separated list of CA certificate to use during SSL client authentication.

This setting specifies one or more CA certificates to be included in the request when performing SSL client authentication. Some servers require the entire chain, including CA certificates, to be presented when performing SSL client authentication. The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLCheckCRL: Whether to check the Certificate Revocation List for the server certificate.

This setting specifies whether the component will check the Certificate Revocation List specified by the server certificate. If set to true the component will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The component will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the component raises an exception.

When set to false (default) the CRL check will not be performed by the component.

SSLCipherStrength: The minimum cipher strength used for bulk encryption.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting.

SSLEnabledCipherSuites: The cipher suite to be used in an SSL negotiation.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the component will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when UseInternalSecurityAPI is False (default): obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=CALG_AES_256"); obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES"); Possible values when UseInternalSecurityAPI is False (default) include:

CALG_3DES
CALG_3DES_112
CALG_AES
CALG_AES_128
CALG_AES_192
CALG_AES_256
CALG_AGREEDKEY_ANY
CALG_CYLINK_MEK
CALG_DES
CALG_DESX
CALG_DH_EPHEM
CALG_DH_SF
CALG_DSS_SIGN
CALG_ECDH
CALG_ECDH_EPHEM
CALG_ECDSA
CALG_ECMQV
CALG_HASH_REPLACE_OWF
CALG_HUGHES_MD5
CALG_HMAC
CALG_KEA_KEYX
CALG_MAC
CALG_MD2
CALG_MD4
CALG_MD5
CALG_NO_SIGN
CALG_OID_INFO_CNG_ONLY
CALG_OID_INFO_PARAMETERS
CALG_PCT1_MASTER
CALG_RC2
CALG_RC4
CALG_RC5
CALG_RSA_KEYX
CALG_RSA_SIGN
CALG_SCHANNEL_ENC_KEY
CALG_SCHANNEL_MAC_KEY
CALG_SCHANNEL_MASTER_HASH
CALG_SEAL
CALG_SHA
CALG_SHA1
CALG_SHA_256
CALG_SHA_384
CALG_SHA_512
CALG_SKIPJACK
CALG_SSL2_MASTER
CALG_SSL3_MASTER
CALG_SSL3_SHAMD5
CALG_TEK
CALG_TLS1_MASTER
CALG_TLS1PRF

Example values when UseInternalSecurityAPI is True:

obj.config("SSLEnabledCipherSuites=*");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_DH_ANON_WITH_AES_128_CBC_SHA");

Possible values when UseInternalSecurityAPI is True include:

TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_128_GCM_SHA256
TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
TLS_DH_RSA_WITH_AES_128_GCM_SHA256
TLS_DH_RSA_WITH_AES_256_GCM_SHA384
TLS_DH_DSS_WITH_AES_128_GCM_SHA256
TLS_DH_DSS_WITH_AES_256_GCM_SHA384
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA256
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
TLS_DHE_RSA_WITH_AES_256_CBC_SHA
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
TLS_DHE_DSS_WITH_AES_256_CBC_SHA
TLS_RSA_WITH_AES_128_CBC_SHA
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_DSS_WITH_AES_128_CBC_SHA
TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_DES_CBC_SHA
TLS_DHE_RSA_WITH_DES_CBC_SHA
TLS_DHE_DSS_WITH_DES_CBC_SHA
TLS_RSA_WITH_RC4_128_MD5
TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols) only the following cipher suites are supported:

TLS_AES_256_GCM_SHA384
TLS_CHACHA20_POLY1305_SHA256
TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols: Used to enable/disable the supported security protocols.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:


TLS1.3	12288 (Hex 3000)
TLS1.2	3072 (Hex C00) (Default)
TLS1.1	768 (Hex 300) (Default)
TLS1	192 (Hex C0) (Default)
SSL3	48 (Hex 30)
SSL2	12 (Hex 0C)

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList setting.

Note: TLS 1.1 and TLS1.2 support are only available starting with Windows 7.

Note: Enabling TLS 1.3 will automatically set UseInternalSecurityAPI to True.

SSLEnableRenegotiation: Whether the renegotiation_info SSL extension is supported.

This setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This setting is true by default, but can be set to false to disable the extension.

This setting is only applicable when UseInternalSecurityAPI is set to true.

SSLIncludeCertChain: Whether the entire certificate chain is included in the SSLServerAuthentication event.

This setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

SSLKeyLogFile: The location of a file where per-session secrets are written for debugging purposes.

This setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the component will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffice for debugging purposes. When writing to this file the component will only append, it will not overwrite previous values.

Note: This setting is only applicable when UseInternalSecurityAPI is set to True.

SSLNegotiatedCipher: Returns the negotiated ciphersuite.

Returns the ciphersuite negotiated during the SSL handshake.

Note: For server components (e.g. IPDaemon) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

SSLNegotiatedCipherStrength: Returns the negotiated ciphersuite strength.

Returns the strength of the ciphersuite negotiated during the SSL handshake.

Note: For server components (e.g. IPDaemon) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

SSLNegotiatedCipherSuite: Returns the negotiated ciphersuite.

Returns the ciphersuite negotiated during the SSL handshake represented as a single string.

Note: For server components (e.g. IPDaemon) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherSuite[connId]");

SSLNegotiatedKeyExchange: Returns the negotiated key exchange algorithm.

Returns the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. IPDaemon) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchange[connId]");

SSLNegotiatedKeyExchangeStrength: Returns the negotiated key exchange algorithm strength.

Returns the strenghth of the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. IPDaemon) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchangeStrength[connId]");

SSLNegotiatedProtocol: Returns the negotiated protocol version.

Returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g. IPDaemon) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedProtocol[connId]");

SSLProvider: The name of the security provider to use.

Change this setting to use security providers other than the system default.

Use this setting with caution. Disabling SSL security or pointing to the wrong provider could potentially cause serious security vulnerabilities in your application.

The special value "*" (default) picks the default SSL provider defined in the system.

Note: On Windows systems, the default SSL Provider is "Microsoft Unified Security Protocol Provider" and cannot be changed .

SSLSecurityFlags: Flags that control certificate verification.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:


0x00000001	Ignore time validity status of certificate.
0x00000002	Ignore time validity status of CTL.
0x00000004	Ignore non-nested certificate times.
0x00000010	Allow unknown Certificate Authority.
0x00000020	Ignore wrong certificate usage.
0x00000100	Ignore unknown certificate revocation status.
0x00000200	Ignore unknown CTL signer revocation status.
0x00000400	Ignore unknown Certificate Authority revocation status.
0x00000800	Ignore unknown Root revocation status.
0x00008000	Allow test Root certificate.
0x00004000	Trust test Root certificate.
0x80000000	Ignore non-matching CN (certificate CN not-matching server name).

This functionality is currently not available when the provider is OpenSSL.

SSLServerCACerts: A newline separated list of CA certificate to use during SSL server certificate validation.

This setting optionally specifies one or more CA certificates to be used when verifying the server certificate. When verifying the server's certificate the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This setting should only be set if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

TLS12SignatureAlgorithms: Defines the allowed TLS 1.2 signature algorithms when UseInternalSecurityAPI is True.

This setting specifies the allowed server certificate signature algorithms when UseInternalSecurityAPI is True and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the component will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the component raises an exception.

The format of this value is a comma separated list of hash-signature combinations. For instance: IPPort.Config("UseInternalSecurityAPI=true"); IPPort.Config("SSLEnabledProtocols=3072"); //TLS 1.2 IPPort.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups: The supported groups for ECC.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and UseInternalSecurityAPI is set to True, the values refer to the supported groups for ECC. The following values are supported:

"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)

TLS13KeyShareGroups: The groups for which to pregenerate key shares.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448"
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1"
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096"
"ffdhe_6144"
"ffdhe_8192"

TLS13Provider: The TLS 1.3 implementation to be used.

This setting specifies the TLS 1.3 implementation which will be used when TLS 1.3 is enabled via SSLEnabledProtocols. Possible values are:

0 (Internal - Default)
1 (Platform)

The platform provider is only supported on Windows 11 / Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.

If set to 1 (Platform provider) please be aware of the following notes:

The platform provider is only available on Windows 11 / Windows Server 2022 and up.
SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2 the above restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.

TLS13SignatureAlgorithms: The allowed certificate signature algorithms.

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

"ed25519" (default)
"ed448" (default)
"ecdsa_secp256r1_sha256" (default)
"ecdsa_secp384r1_sha384" (default)
"ecdsa_secp521r1_sha512" (default)
"rsa_pkcs1_sha256" (default)
"rsa_pkcs1_sha384" (default)
"rsa_pkcs1_sha512" (default)
"rsa_pss_sha256" (default)
"rsa_pss_sha384" (default)
"rsa_pss_sha512" (default)

The default value is rsa_pss_sha256,rsa_pss_sha384,rsa_pss_sha512,rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512,ecdsa_secp256r1_sha256,ecdsa_secp384r1_sha384,ecdsa_secp521r1_sha512,ed25519,ed448. This setting is only applicable when SSLEnabledProtocols includes TLS 1.3.

TLS13SupportedGroups: The supported groups for (EC)DHE key exchange.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448" (default)
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096" (default)
"ffdhe_6144" (default)
"ffdhe_8192" (default)

Base Configuration Settings

BuildInfo: Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

CodePage: The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:


Identifier	Name
037	IBM EBCDIC - U.S./Canada
437	OEM - United States
500	IBM EBCDIC - International
708	Arabic - ASMO 708
709	Arabic - ASMO 449+, BCON V4
710	Arabic - Transparent Arabic
720	Arabic - Transparent ASMO
737	OEM - Greek (formerly 437G)
775	OEM - Baltic
850	OEM - Multilingual Latin I
852	OEM - Latin II
855	OEM - Cyrillic (primarily Russian)
857	OEM - Turkish
858	OEM - Multilingual Latin I + Euro symbol
860	OEM - Portuguese
861	OEM - Icelandic
862	OEM - Hebrew
863	OEM - Canadian-French
864	OEM - Arabic
865	OEM - Nordic
866	OEM - Russian
869	OEM - Modern Greek
870	IBM EBCDIC - Multilingual/ROECE (Latin-2)
874	ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875	IBM EBCDIC - Modern Greek
932	ANSI/OEM - Japanese, Shift-JIS
936	ANSI/OEM - Simplified Chinese (PRC, Singapore)
949	ANSI/OEM - Korean (Unified Hangul Code)
950	ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026	IBM EBCDIC - Turkish (Latin-5)
1047	IBM EBCDIC - Latin 1/Open System
1140	IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141	IBM EBCDIC - Germany (20273 + Euro symbol)
1142	IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143	IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144	IBM EBCDIC - Italy (20280 + Euro symbol)
1145	IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146	IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147	IBM EBCDIC - France (20297 + Euro symbol)
1148	IBM EBCDIC - International (500 + Euro symbol)
1149	IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200	Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201	Unicode UCS-2 Big-Endian
1250	ANSI - Central European
1251	ANSI - Cyrillic
1252	ANSI - Latin I
1253	ANSI - Greek
1254	ANSI - Turkish
1255	ANSI - Hebrew
1256	ANSI - Arabic
1257	ANSI - Baltic
1258	ANSI/OEM - Vietnamese
1361	Korean (Johab)
10000	MAC - Roman
10001	MAC - Japanese
10002	MAC - Traditional Chinese (Big5)
10003	MAC - Korean
10004	MAC - Arabic
10005	MAC - Hebrew
10006	MAC - Greek I
10007	MAC - Cyrillic
10008	MAC - Simplified Chinese (GB 2312)
10010	MAC - Romania
10017	MAC - Ukraine
10021	MAC - Thai
10029	MAC - Latin II
10079	MAC - Icelandic
10081	MAC - Turkish
10082	MAC - Croatia
12000	Unicode UCS-4 Little-Endian
12001	Unicode UCS-4 Big-Endian
20000	CNS - Taiwan
20001	TCA - Taiwan
20002	Eten - Taiwan
20003	IBM5550 - Taiwan
20004	TeleText - Taiwan
20005	Wang - Taiwan
20105	IA5 IRV International Alphabet No. 5 (7-bit)
20106	IA5 German (7-bit)
20107	IA5 Swedish (7-bit)
20108	IA5 Norwegian (7-bit)
20127	US-ASCII (7-bit)
20261	T.61
20269	ISO 6937 Non-Spacing Accent
20273	IBM EBCDIC - Germany
20277	IBM EBCDIC - Denmark/Norway
20278	IBM EBCDIC - Finland/Sweden
20280	IBM EBCDIC - Italy
20284	IBM EBCDIC - Latin America/Spain
20285	IBM EBCDIC - United Kingdom
20290	IBM EBCDIC - Japanese Katakana Extended
20297	IBM EBCDIC - France
20420	IBM EBCDIC - Arabic
20423	IBM EBCDIC - Greek
20424	IBM EBCDIC - Hebrew
20833	IBM EBCDIC - Korean Extended
20838	IBM EBCDIC - Thai
20866	Russian - KOI8-R
20871	IBM EBCDIC - Icelandic
20880	IBM EBCDIC - Cyrillic (Russian)
20905	IBM EBCDIC - Turkish
20924	IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932	JIS X 0208-1990 & 0121-1990
20936	Simplified Chinese (GB2312)
21025	IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027	Extended Alpha Lowercase
21866	Ukrainian (KOI8-U)
28591	ISO 8859-1 Latin I
28592	ISO 8859-2 Central Europe
28593	ISO 8859-3 Latin 3
28594	ISO 8859-4 Baltic
28595	ISO 8859-5 Cyrillic
28596	ISO 8859-6 Arabic
28597	ISO 8859-7 Greek
28598	ISO 8859-8 Hebrew
28599	ISO 8859-9 Latin 5
28605	ISO 8859-15 Latin 9
29001	Europa 3
38598	ISO 8859-8 Hebrew
50220	ISO 2022 Japanese with no halfwidth Katakana
50221	ISO 2022 Japanese with halfwidth Katakana
50222	ISO 2022 Japanese JIS X 0201-1989
50225	ISO 2022 Korean
50227	ISO 2022 Simplified Chinese
50229	ISO 2022 Traditional Chinese
50930	Japanese (Katakana) Extended
50931	US/Canada and Japanese
50933	Korean Extended and Korean
50935	Simplified Chinese Extended and Simplified Chinese
50936	Simplified Chinese
50937	US/Canada and Traditional Chinese
50939	Japanese (Latin) Extended and Japanese
51932	EUC - Japanese
51936	EUC - Simplified Chinese
51949	EUC - Korean
51950	EUC - Traditional Chinese
52936	HZ-GB2312 Simplified Chinese
54936	Windows XP: GB18030 Simplified Chinese (4 Byte)
57002	ISCII Devanagari
57003	ISCII Bengali
57004	ISCII Tamil
57005	ISCII Telugu
57006	ISCII Assamese
57007	ISCII Oriya
57008	ISCII Kannada
57009	ISCII Malayalam
57010	ISCII Gujarati
57011	ISCII Punjabi
65000	Unicode UTF-7
65001	Unicode UTF-8

The following is a list of valid code page identifiers for Mac OS only:


Identifier	Name
1	ASCII
2	NEXTSTEP
3	JapaneseEUC
4	UTF8
5	ISOLatin1
6	Symbol
7	NonLossyASCII
8	ShiftJIS
9	ISOLatin2
10	Unicode
11	WindowsCP1251
12	WindowsCP1252
13	WindowsCP1253
14	WindowsCP1254
15	WindowsCP1250
21	ISO2022JP
30	MacOSRoman
10	UTF16String
0x90000100	UTF16BigEndian
0x94000100	UTF16LittleEndian
0x8c000100	UTF32String
0x98000100	UTF32BigEndian
0x9c000100	UTF32LittleEndian
65536	Proprietary

LicenseInfo: Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

Product: The product the license is for.
Product Key: The key the license was generated from.
License Source: Where the license was found (e.g., RuntimeLicense, License File).
License Type: The type of license installed (e.g., Royalty Free, Single Server).

UseInternalSecurityAPI: Tells the component whether or not to use the system security libraries or an internal implementation.

By default the component will use the system security libraries to perform cryptographic functions. Setting this to True tells the component to use the internal implementation instead of using the system's security API.

Trappable Errors (IPDaemon Component)

IPDaemon Errors

100   You cannot change the RemotePort at this time. A connection is in progress.
101   You cannot change the RemoteHost at this time. A connection is in progress.
102   The RemoteHost address is invalid (0.0.0.0).
104   IPDaemon is already listening.
106   Cannot change LocalPort when IPDaemon is Listening.
107   Cannot change LocalHost when IPDaemon is Listening.
108   Cannot change MaxConnections when IPDaemon is Listening.
112   You cannot change MaxLineLength at this time. A connection is in progress.
116   RemotePort cannot be zero. Please specify a valid service port number.
126   Invalid ConnectionId.
135   Operation would block.

SSL Errors

270   Cannot load specified security library.
271   Cannot open certificate store.
272   Cannot find specified certificate.
273   Cannot acquire security credentials.
274   Cannot find certificate chain.
275   Cannot verify certificate chain.
276   Error during handshake.
280   Error verifying certificate.
281   Could not find client certificate.
282   Could not find server certificate.
283   Error encrypting data.
284   Error decrypting data.

TCP/IP Errors

10004   [10004] Interrupted system call.
10009   [10009] Bad file number.
10013   [10013] Access denied.
10014   [10014] Bad address.
10022   [10022] Invalid argument.
10024   [10024] Too many open files.
10035   [10035] Operation would block.
10036   [10036] Operation now in progress.
10037   [10037] Operation already in progress.
10038   [10038] Socket operation on non-socket.
10039   [10039] Destination address required.
10040   [10040] Message too long.
10041   [10041] Protocol wrong type for socket.
10042   [10042] Bad protocol option.
10043   [10043] Protocol not supported.
10044   [10044] Socket type not supported.
10045   [10045] Operation not supported on socket.
10046   [10046] Protocol family not supported.
10047   [10047] Address family not supported by protocol family.
10048   [10048] Address already in use.
10049   [10049] Can't assign requested address.
10050   [10050] Network is down.
10051   [10051] Network is unreachable.
10052   [10052] Net dropped connection or reset.
10053   [10053] Software caused connection abort.
10054   [10054] Connection reset by peer.
10055   [10055] No buffer space available.
10056   [10056] Socket is already connected.
10057   [10057] Socket is not connected.
10058   [10058] Can't send after socket shutdown.
10059   [10059] Too many references, can't splice.
10060   [10060] Connection timed out.
10061   [10061] Connection refused.
10062   [10062] Too many levels of symbolic links.
10063   [10063] File name too long.
10064   [10064] Host is down.
10065   [10065] No route to host.
10066   [10066] Directory not empty
10067   [10067] Too many processes.
10068   [10068] Too many users.
10069   [10069] Disc Quota Exceeded.
10070   [10070] Stale NFS file handle.
10071   [10071] Too many levels of remote in path.
10091   [10091] Network subsystem is unavailable.
10092   [10092] WINSOCK DLL Version out of range.
10093   [10093] Winsock not loaded yet.
11001   [11001] Host not found.
11002   [11002] Non-authoritative 'Host not found' (try again or check DNS setup).
11003   [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP.
11004   [11004] Valid name, no data record (check DNS setup).


	100 You cannot change the RemotePort at this time. A connection is in progress.
	101 You cannot change the RemoteHost at this time. A connection is in progress.
	102 The RemoteHost address is invalid (0.0.0.0).
	104 IPDaemon is already listening.
	106 Cannot change LocalPort when IPDaemon is Listening.
	107 Cannot change LocalHost when IPDaemon is Listening.
	108 Cannot change MaxConnections when IPDaemon is Listening.
	112 You cannot change MaxLineLength at this time. A connection is in progress.
	116 RemotePort cannot be zero. Please specify a valid service port number.
	126 Invalid ConnectionId.
	135 Operation would block.


	270 Cannot load specified security library.
	271 Cannot open certificate store.
	272 Cannot find specified certificate.
	273 Cannot acquire security credentials.
	274 Cannot find certificate chain.
	275 Cannot verify certificate chain.
	276 Error during handshake.
	280 Error verifying certificate.
	281 Could not find client certificate.
	282 Could not find server certificate.
	283 Error encrypting data.
	284 Error decrypting data.


	10004 [10004] Interrupted system call.
	10009 [10009] Bad file number.
	10013 [10013] Access denied.
	10014 [10014] Bad address.
	10022 [10022] Invalid argument.
	10024 [10024] Too many open files.
	10035 [10035] Operation would block.
	10036 [10036] Operation now in progress.
	10037 [10037] Operation already in progress.
	10038 [10038] Socket operation on non-socket.
	10039 [10039] Destination address required.
	10040 [10040] Message too long.
	10041 [10041] Protocol wrong type for socket.
	10042 [10042] Bad protocol option.
	10043 [10043] Protocol not supported.
	10044 [10044] Socket type not supported.
	10045 [10045] Operation not supported on socket.
	10046 [10046] Protocol family not supported.
	10047 [10047] Address family not supported by protocol family.
	10048 [10048] Address already in use.
	10049 [10049] Can't assign requested address.
	10050 [10050] Network is down.
	10051 [10051] Network is unreachable.
	10052 [10052] Net dropped connection or reset.
	10053 [10053] Software caused connection abort.
	10054 [10054] Connection reset by peer.
	10055 [10055] No buffer space available.
	10056 [10056] Socket is already connected.
	10057 [10057] Socket is not connected.
	10058 [10058] Can't send after socket shutdown.
	10059 [10059] Too many references, can't splice.
	10060 [10060] Connection timed out.
	10061 [10061] Connection refused.
	10062 [10062] Too many levels of symbolic links.
	10063 [10063] File name too long.
	10064 [10064] Host is down.
	10065 [10065] No route to host.
	10066 [10066] Directory not empty
	10067 [10067] Too many processes.
	10068 [10068] Too many users.
	10069 [10069] Disc Quota Exceeded.
	10070 [10070] Stale NFS file handle.
	10071 [10071] Too many levels of remote in path.
	10091 [10091] Network subsystem is unavailable.
	10092 [10092] WINSOCK DLL Version out of range.
	10093 [10093] Winsock not loaded yet.
	11001 [11001] Host not found.
	11002 [11002] Non-authoritative 'Host not found' (try again or check DNS setup).
	11003 [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP.
	11004 [11004] Valid name, no data record (check DNS setup).

IPWorks 2022 C++ Builder Edition

IPDaemon Component

Syntax

Remarks

Property List

Method List

Event List

Configuration Settings

ConnectionBacklog Property (IPDaemon Component)

Syntax

Default Value

Remarks

Data Type

ConnectionCount Property (IPDaemon Component)

Syntax

Default Value

Remarks

Data Type

AcceptData Property (IPDaemon Component)

Syntax

Default Value

Remarks

Data Type

BytesSent Property (IPDaemon Component)

Syntax

Default Value

Remarks

Data Type

Connected Property (IPDaemon Component)

Syntax

Default Value

Remarks

Data Type

ConnectionId Property (IPDaemon Component)

Syntax

Default Value

Remarks

Data Type

DataToSend Property (IPDaemon Component)

Syntax

Default Value

Remarks

Data Type

EOL Property (IPDaemon Component)

Syntax

Default Value

Remarks

Data Type

IdleTimeout Property (IPDaemon Component)

Syntax

Default Value

Remarks

Data Type

LocalAddress Property (IPDaemon Component)

Syntax

Default Value

Remarks

Data Type

ReadyToSend Property (IPDaemon Component)

Syntax

Default Value

Remarks

Data Type

RecordLength Property (IPDaemon Component)

Syntax

Default Value

Remarks

Data Type

RemoteHost Property (IPDaemon Component)

Syntax

Default Value

Remarks

Data Type

RemotePort Property (IPDaemon Component)

Syntax

Default Value

Remarks

Data Type

SingleLineMode Property (IPDaemon Component)

Syntax