IPWorks WebSockets 2020 .NET Edition

Questions / Feedback?

WebSocketClient Component

Properties   Methods   Events   Configuration Settings   Errors  

The WebSocketClient component is used to establish a WebSocket connection to a server.

Syntax

nsoftware.IPWorksWS.Websocketclient

Remarks

The WebSocketClient component provides a simple way to establish a WebSocket connection to a server. The server must support the WebSocket protocol. After the connection is established data can be sent and received.

To begin, call the Connect method. After the connection is established you can send and receive data in a variety of ways. To send data you may set the DataToSend property or call Send, SendFile, or SendText. Data is received via the DataIn event.

The component also supports sending and receive data through the use of streams. The SetReceiveStream and SetSendStream methods may be used to specify a stream for sending or receiving.

The component supports both plain-text (ws://) and SSL (wss://) connections.

Property List


The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

AcceptDataEnables or disables data reception (the DataIn event).
AuthorizationThe Authorization string to be sent to the server.
AuthSchemeThe authentication scheme to use when server authorization is required.
BytesSentThe number of bytes actually sent after an assignment to DataToSend .
ConnectedShows whether the component is connected.
CookiesCollection of cookies.
DataFormatThe format of the data being sent.
DataToSendA string of data to be sent to the remote host.
FirewallA set of properties related to firewall access.
FollowRedirectsDetermines what happens when the server issues a redirect.
LocalHostThe name of the local host or user-assigned IP interface through which connections are initiated or accepted.
LocalPortThe TCP port in the local host where the component binds.
OriginThe Origin header field value.
OtherHeadersOther headers as determined by the user (optional).
ParsedHeadersCollection of headers returned from the last request.
PasswordA password if authentication is to be used.
ProxyA set of properties related to proxy access.
ReadyToSendIndicates whether the component is ready to send data.
SSLAcceptServerCertInstructs the component to unconditionally accept the server certificate that matches the supplied certificate.
SSLCertThe certificate to be used during SSL negotiation.
SSLServerCertThe server certificate for the last established connection.
SubProtocolsOptional subprotocols supported by the client.
TimeoutA timeout for the component.
TransferredHeadersThe full set of headers as received from the server.
UserA user name if authentication is to be used.

Method List


The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

AddCookieAdds a cookie and the corresponding value to the outgoing request headers.
ConfigSets or retrieves a configuration setting.
ConnectConnects to the specified host.
DisconnectDisconnects from the remote host.
DoEventsProcesses events from the internal message queue.
InterruptInterrupt the current method.
PingSends a Ping request to the remote host.
ResetReset the component.
ResetHeadersResets all HTTP Headers, Cookies, LocalFile , and AttachedFile .
SendSends data to the remote host.
SendFileSends file to the remote host.
SendTextSends text data to the server.
SetReceiveStreamSets the stream to which received data will be written.
SetSendStreamReads content from the stream and sends it to the server.

Event List


The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

ConnectedFired immediately after a connection completes (or fails).
ConnectionStatusFired to indicate changes in connection state.
DataInFired when data is received.
DisconnectedFired when a connection is closed.
ErrorInformation about errors during data delivery.
HeaderFired every time a header line comes in.
LogFires once for each log message.
ReadyToSendFired when the component is ready to send data.
RedirectFired when a redirection is received from the server.
SetCookieFired for every cookie set by the server.
SSLServerAuthenticationFired after the server presents its certificate to the client.
SSLStatusShows the progress of the secure connection.

Configuration Settings


The following is a list of configuration settings for the component with short descriptions. Click on the links for further details.

BufferMessageIndicates whether or not the entire message is buffered before firing the DataIn event.
DisconnectStatusCodeSpecifies the status code when closing a connection.
DisconnectStatusDescriptionSpecifies the message associated with the disconnect status code.
MaxFrameSizeSpecifies the maximum size of the outgoing message in bytes before fragmentation occurs.
MessageLengthThe length of the message (in bytes) when sending asynchronously.
StatusLineThe first line of the last HTTP server response.
TransferredDataThe body of the last HTTP server response.
URLThe URL to which the component connected.
AcceptEncodingUsed to tell the server which types of content encodings the client supports.
AllowHTTPCompressionThis property enables HTTP compression for receiving data.
AllowHTTPFallbackWhether HTTP/2 connections are permitted to fallback to HTTP/1.1.
AllowNTLMFallbackWhether to allow fallback from Negotiate to NTLM when authenticating.
AppendWhether to append data to LocalFile.
AuthorizationThe Authorization string to be sent to the server.
BytesTransferredContains the number of bytes transferred in the response data.
ChunkSizeSpecifies the chunk size in bytes when using chunked encoding.
CompressHTTPRequestSet to true to compress the body of a PUT or POST request.
EncodeURLIf set to true the URL will be encoded by the component.
FollowRedirectsDetermines what happens when the server issues a redirect.
GetOn302RedirectIf set to true the component will perform a GET on the new location.
HTTP2HeadersWithoutIndexingHTTP2 headers that should not update the dynamic header table with incremental indexing.
HTTPVersionThe version of HTTP used by the component.
IfModifiedSinceA date determining the maximum age of the desired document.
KeepAliveDetermines whether the HTTP connection is closed after completion of the request.
KerberosSPNThe Service Principal Name for the Kerberos Domain Controller.
LogLevelThe level of detail that is logged.
MaxHeadersInstructs component to save the amount of headers specified that are returned by the server after a Header event has been fired.
MaxHTTPCookiesInstructs component to save the amount of cookies specified that are returned by the server when a SetCookie event is fired.
MaxRedirectAttemptsLimits the number of redirects that are followed in a request.
NegotiatedHTTPVersionThe negotiated HTTP version.
OtherHeadersOther headers as determined by the user (optional).
ProxyAuthorizationThe authorization string to be sent to the proxy server.
ProxyAuthSchemeThe authorization scheme to be used for the proxy.
ProxyPasswordA password if authentication is to be used for the proxy.
ProxyPortPort for the proxy server (default 80).
ProxyServerName or IP address of a proxy server (optional).
ProxyUserA user name if authentication is to be used for the proxy.
SentHeadersThe full set of headers as sent by the client.
StatusLineThe first line of the last response from the server.
TransferredDataThe contents of the last response from the server.
TransferredDataLimitThe maximum number of incoming bytes to be stored by the component.
TransferredHeadersThe full set of headers as received from the server.
TransferredRequestThe full request as sent by the client.
UseChunkedEncodingEnables or Disables HTTP chunked encoding for transfers.
UseIDNsWhether to encode hostnames to internationalized domain names.
UsePlatformDeflateWhether to use the platform implementation to decompress compressed responses.
UsePlatformHTTPClientWhether or not to use the platform HTTP client.
UserAgentInformation about the user agent (browser).
CloseStreamAfterTransferIf true, the component will close the upload or download stream after the transfer.
ConnectionTimeoutSets a separate timeout value for establishing a connection.
FirewallAutoDetectTells the component whether or not to automatically detect and use firewall system settings, if available.
FirewallHostName or IP address of firewall (optional).
FirewallListenerIf true, the component binds to a SOCKS firewall as a server (IPPort only).
FirewallPasswordPassword to be used if authentication is to be used when connecting through the firewall.
FirewallPortThe TCP port for the FirewallHost;.
FirewallTypeDetermines the type of firewall to connect through.
FirewallUserA user name if authentication is to be used connecting through a firewall.
KeepAliveIntervalThe retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTimeThe inactivity time in milliseconds before a TCP keep-alive packet is sent.
LingerWhen set to True, connections are terminated gracefully.
LingerTimeTime in seconds to have the connection linger.
LocalHostThe name of the local host through which connections are initiated or accepted.
LocalPortThe port in the local host where the component binds.
MaxLineLengthThe maximum amount of data to accumulate when no EOL is found.
MaxTransferRateThe transfer rate limit in bytes per second.
ProxyExceptionsListA semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAliveDetermines whether or not the keep alive socket option is enabled.
TcpNoDelayWhether or not to delay when sending packets.
UseIPv6Whether to use IPv6.
UseNTLMv2Whether to use NTLM V2.
CACertFilePathsThe paths to CA certificate files when using Mono on Unix/Linux.
LogSSLPacketsControls whether SSL packets are logged when using the internal security API.
ReuseSSLSessionDetermines if the SSL session is reused.
SSLCACertsA newline separated list of CA certificate to use during SSL client authentication.
SSLCheckCRLWhether to check the Certificate Revocation List for the server certificate.
SSLCipherStrengthThe minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuitesThe cipher suite to be used in an SSL negotiation.
SSLEnabledProtocolsUsed to enable/disable the supported security protocols.
SSLEnableRenegotiationWhether the renegotiation_info SSL extension is supported.
SSLIncludeCertChainWhether the entire certificate chain is included in the SSLServerAuthentication event.
SSLNegotiatedCipherReturns the negotiated ciphersuite.
SSLNegotiatedCipherStrengthReturns the negotiated ciphersuite strength.
SSLNegotiatedCipherSuiteReturns the negotiated ciphersuite.
SSLNegotiatedKeyExchangeReturns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrengthReturns the negotiated key exchange algorithm strength.
SSLNegotiatedProtocolReturns the negotiated protocol version.
SSLProviderThe name of the security provider to use.
SSLSecurityFlagsFlags that control certificate verification.
SSLServerCACertsA newline separated list of CA certificate to use during SSL server certificate validation.
TLS12SignatureAlgorithmsDefines the allowed TLS 1.2 signature algorithms when UseInternalSecurityAPI is True.
TLS12SupportedGroupsThe supported groups for ECC.
TLS13KeyShareGroupsThe groups for which to pregenerate key shares.
TLS13SignatureAlgorithmsThe allowed certificate signature algorithms.
TLS13SupportedGroupsThe supported groups for (EC)DHE key exchange.
AbsoluteTimeoutDetermines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallDataUsed to send extra data to the firewall.
InBufferSizeThe size in bytes of the incoming queue of the socket.
OutBufferSizeThe size in bytes of the outgoing queue of the socket.

Copyright (c) 2022 /n software inc. - All rights reserved.
IPWorks WebSockets 2020 .NET Edition - Version 20.0 [Build 8155]