SecureBlackbox 2020 .NET Edition

Questions / Feedback?

SSHSettings Type

A container for various SSH protocol settings.

Remarks

SSHSettings stores various settings of SSH client or server.

Fields

AutoAdjustCiphers
Boolean

Whether the SSH client should adjust its list of supported ciphers 'on-the-fly' for greater compatibility with the server it is connecting to.

BaseConfiguration
SecureTransportPredefinedConfigurations

Allows to choose base configuration of SSH settings, tuned up for different purposes such as high security or higher compatibility.

CompressionAlgorithms
String

A list of session compression algorithms separated with commas or semicolons. Each algorithm in the list may be prefixed with a minus sign (-) to indicate that the algorithm should be disabled rather than enabled. Besides the specific algorithm names, this property supports the all (and -all) aliases that allow to blanketly enable or disable all compression algorithms at once.

Note: the list of algorithms provided to this property alters the baseline list of compression algorithms pre-configured for this component. Remember to start your algorithm string with -all; if you need to only enable a specific fixed set of algorithms. The list of supported compression algorithms is provided below:

  • none
  • zlib
  • zlib@openssh.com

CompressionLevel
Integer

Possible values for the Compression Level range from 0 (minimum compression) to 9 (maximum compression). This setting is ignored if compression wasn't accepted.

DefaultWindowSize
Integer

The SSH window size specifies how many bytes the client can send to the server in the command channel without obtaining pre-authorization for the further send from the server.

EncryptionAlgorithms
String

A list of session encryption algorithms separated with commas or semicolons. Each algorithm in the list may be prefixed with a minus sign (-) to indicate that the algorithm should be disabled rather than enabled. Besides the specific algorithm names, this property supports the all (and -all) aliases that allow to blanketly enable or disable all encryption algorithms at once.

Note: the list of algorithms provided to this property alters the baseline list of encryption algorithms pre-configured for this component. Remember to start your algorithm string with -all; if you need to only enable a specific fixed set of algorithms. The list of supported encryption algorithms is provided below:

  • 3des-cbc
  • blowfish-cbc
  • twofish256-cbc
  • twofish192-cbc
  • twofish128-cbc
  • aes256-cbc
  • aes192-cbc
  • aes128-cbc
  • serpent256-cbc
  • serpent192-cbc
  • serpent128-cbc
  • arcfour
  • idea-cbc
  • cast128-cbc
  • none
  • des-cbc
  • aes128-ctr
  • aes192-ctr
  • aes256-ctr
  • 3des-ctr
  • blowfish-ctr
  • twofish128-ctr
  • twofish192-ctr
  • twofish256-ctr
  • serpent128-ctr
  • serpent192-ctr
  • serpent256-ctr
  • idea-ctr
  • cast128-ctr
  • arcfour128
  • arcfour256
  • aes128-gcm
  • aes256-gcm
  • aes128-gcm@openssh.com
  • aes256-gcm@openssh.com
  • chacha20-poly1305
  • chacha20-poly1305@openssh.com

ForceCompression
Boolean

Whether the SSH client should explicitly request compression.

If ForceCompression is False, compression will be used only if the server doesn't support algorithms without compression.

GSSAuthTypes
String

A comma-separated list of authentication types. Two types are currently supported: gssapi-with-mic and gssapi-keyex.

GSSDelegateCreds
Boolean

Switches credential delegation on or off.

GSSHostname
String

The GSS host name, in form of a FQDN (e.g. hostname.com), a principal name (e.g. 'host@hostname.com), or a cross-real ticket-granting ticket (e.g. krbtgt/test.com@example.com).

GSSLib
String

A path to the GSS-API library (DLL or SO).

GSSMechanisms
String

A comma-separated list of GSS mechanisms to use. Two values are currently supported: lib and SSPI.

GSSProtocols
String

A comma-separated list of SSPI protocols. Two protocols are currently supported: kerberos and NTLM.

HandshakeTimeout
Integer

Specifies the maximal time for the SSH handshake to proceed, in seconds. If the handshake is not completed within this period, the session is aborted.

KexAlgorithms
String

A list of key exchange algorithms separated with commas or semicolons. Each algorithm in the list may be prefixed with a minus sign (-) to indicate that the algorithm should be disabled rather than enabled. Besides the specific algorithm names, this property supports the all (and -all) aliases that allow to blanketly enable or disable all key exchange algorithms at once.

Note: the list of algorithms provided to this property alters the baseline list of key exchange algorithms pre-configured for this component. Remember to start your algorithm string with -all; if you need to only enable a specific fixed set of algorithms. The list of supported kex algorithms is provided below:

  • diffie-hellman-group-exchange-sha1
  • diffie-hellman-group1-sha1
  • diffie-hellman-group14-sha1
  • diffie-hellman-group-exchange-sha256
  • rsa1024-sha1
  • rsa2048-sha256
  • ecdh-sha2-nistp256
  • ecdh-sha2-nistp384
  • ecdh-sha2-nistp521
  • ecdh-sha2-nistk163
  • ecdh-sha2-nistp192
  • ecdh-sha2-nistp224
  • ecdh-sha2-nistk233
  • ecdh-sha2-nistb233
  • ecdh-sha2-nistk283
  • ecdh-sha2-nistk409
  • ecdh-sha2-nistb409
  • ecdh-sha2-nistt571
  • ecdh-sha2-curve25519
  • curve25519-sha256@libssh.org
  • curve448-sha512@libssh.org

MacAlgorithms
String

A list of MAC (for message authentication code) algorithms separated with commas or semicolons. Each algorithm in the list may be prefixed with a minus sign (-) to indicate that the algorithm should be disabled rather than enabled. Besides the specific algorithm names, this property supports the all (and -all) aliases that allow to blanketly enable or disable all MAC algorithms at once.

Note: the list of algorithms provided to this property alters the baseline list of MAC algorithms pre-configured for this component. Remember to start your algorithm string with -all; if you need to only enable a specific fixed set of algorithms. The list of supported MAC algorithms is provided below:

  • hmac-sha1
  • hmac-sha1-96
  • hmac-md5
  • hmac-md5-96
  • none
  • hmac-ripemd160
  • hmac-ripemd
  • hmac-ripemd160@openssh.com
  • hmac-sha256@ssh.com
  • hmac-sha256-96@ssh.com
  • umac-32@openssh.com
  • umac-64@openssh.com
  • umac-96@openssh.com
  • umac-128@openssh.com
  • hmac-sha2-256
  • hmac-sha2-512
  • aes128-gcm
  • aes256-gcm
  • chacha20-poly1305@openssh.com
  • hmac-sha2-256-etm@openssh.com
  • hmac-sha2-512-etm@openssh.com

MaxSSHPacketSize
Integer

Specifies the maximum length of one SSH packet in bytes.

MinWindowSize
Integer

Specifies the minimal internal window size. When the minimal window size is reached, the 'window extension' request is sent to the server. This request notifies the server that the window was extended, and it can send more data.

ObfuscateHandshake
Boolean

Enables or disables handshake obfuscation.

ObfuscationPassword
String

Specifies the password used to encrypt the handshake when ObfuscateHandshake is set.

PublicKeyAlgorithms
String

A list of public key algorithms separated with commas or semicolons. Each algorithm in the list may be prefixed with a minus sign (-) to indicate that the algorithm should be disabled rather than enabled. Besides the specific algorithm names, this property supports the all (and -all) aliases that allow to blanketly enable or disable all public key algorithms at once.

Note: the list of algorithms provided to this property alters the baseline list of public key algorithms pre-configured for this component. Remember to start your algorithm string with -all; if you need to only enable a specific fixed set of algorithms. The list of supported public key algorithms is provided below:

  • ssh-dss
  • ssh-rsa
  • x509v3-sign-rsa
  • x509v3-sign-dss
  • spki-sign-rsa,
  • spki-sign-dss
  • pgp-sign-rsa
  • pgp-sign-dss
  • ecdsa-sha2-nistp256
  • ecdsa-sha2-nistp384
  • ecdsa-sha2-nistp521
  • ecdsa-sha2-nistk163
  • ecdsa-sha2-nistp192
  • ecdsa-sha2-nistp224
  • ecdsa-sha2-nistk233
  • ecdsa-sha2-nistb233
  • ecdsa-sha2-nistk283
  • ecdsa-sha2-nistk409
  • ecdsa-sha2-nistb409
  • ecdsa-sha2-nistt571,
  • ecdsa-sha2-curve25519
  • x509v3-ssh-rsa
  • x509v3-ssh-dss
  • x509v3-rsa2048-sha256
  • x509v3-ecdsa-sha2-nistp256
  • x509v3-ecdsa-sha2-nistp384
  • x509v3-ecdsa-sha2-nistp521
  • x509v3-ecdsa-sha2-nistk163
  • x509v3-ecdsa-sha2-nistp192
  • x509v3-ecdsa-sha2-nistp224
  • x509v3-ecdsa-sha2-nistk233
  • x509v3-ecdsa-sha2-nistb233
  • x509v3-ecdsa-sha2-nistk283
  • x509v3-ecdsa-sha2-nistk409
  • x509v3-ecdsa-sha2-nistb409
  • x509v3-ecdsa-sha2-nistt571
  • x509v3-ecdsa-sha2-curve25519
  • ssh-ed25519
  • ssh-ed448

RequestPasswordChange
Boolean

Whether to request a password change when connecting.

SoftwareName
String

The name to be used by the component to identify itself.

TrustAllKeys
Boolean

Enables or disables explicit trust to all server keys. Use with care.

UseAuthAgent
Boolean

Enables or disables the use of external key agent, such as Putty key agent.

Versions
Integer

Specifies enabled SSH protocol versions (1 or 2).

Constructors

public SSHSettings();
Public SSHSettings()

Creates a new object with default settings.

Copyright (c) 2022 /n software inc. - All rights reserved.
SecureBlackbox 2020 .NET Edition - Version 20.0 [Build 8165]