SOAPVerifier Component

Properties   Methods   Events   Config Settings   Errors  

The SOAPVerifier component verifies signed SOAP messages.

Syntax

TsbxSOAPVerifier

Remarks

Use this control to verify signatures over signed SOAP messages.

Property List

---

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

Method List

---

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Event List

---

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Config Settings

---

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

AllSignaturesValid Property (SOAPVerifier Component)

The cumulative validity of all signatures.

Syntax

__property bool AllSignaturesValid = { read=FAllSignaturesValid };

Default Value

false

Remarks

Use this property to check if all the signatures found in the message or document are valid.

This property is read-only and not available at design time.

Data Type

Boolean

AutoValidateSignatures Property (SOAPVerifier Component)

Specifies whether component should validate any present signatures when the document is opened.

Syntax

__property bool AutoValidateSignatures = { read=FAutoValidateSignatures, write=FSetAutoValidateSignatures };

Default Value

true

Remarks

This setting is switched on by default. You can choose to set this property to false in order to validate the signatures manually on a later stage using the Revalidate method.

Data Type

Boolean

BlockedCertCount Property (SOAPVerifier Component)

The number of records in the BlockedCert arrays.

Syntax

__property int BlockedCertCount = { read=FBlockedCertCount, write=FSetBlockedCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• BlockedCertBytes
• BlockedCertHandle

The array indices start at 0 and end at BlockedCertCount - 1.

This property is not available at design time.

Data Type

Integer

BlockedCertBytes Property (SOAPVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray BlockedCertBytes[int BlockedCertIndex] = { read=FBlockedCertBytes };

Remarks

Returns the raw certificate data in DER format.

The BlockedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

BlockedCertHandle Property (SOAPVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 BlockedCertHandle[int BlockedCertIndex] = { read=FBlockedCertHandle, write=FSetBlockedCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The BlockedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is not available at design time.

Data Type

Long64

CertCount Property (SOAPVerifier Component)

The number of records in the Cert arrays.

Syntax

__property int CertCount = { read=FCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• CertBytes
• CertCA
• CertCAKeyID
• CertCRLDistributionPoints
• CertCurve
• CertFingerprint
• CertFriendlyName
• CertHandle
• CertHashAlgorithm
• CertIssuer
• CertIssuerRDN
• CertKeyAlgorithm
• CertKeyBits
• CertKeyFingerprint
• CertKeyUsage
• CertKeyValid
• CertOCSPLocations
• CertPolicyIDs
• CertPublicKeyBytes
• CertSelfSigned
• CertSerialNumber
• CertSigAlgorithm
• CertSubject
• CertSubjectKeyID
• CertSubjectRDN
• CertValidFrom
• CertValidTo

The array indices start at 0 and end at CertCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

CertBytes Property (SOAPVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray CertBytes[int CertIndex] = { read=FCertBytes };

Remarks

Returns the raw certificate data in DER format.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertCA Property (SOAPVerifier Component)

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

Syntax

__property bool CertCA[int CertIndex] = { read=FCertCA };

Default Value

false

Remarks

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

CertCAKeyID Property (SOAPVerifier Component)

A unique identifier (fingerprint) of the CA certificate's private key.

Syntax

__property DynamicArray CertCAKeyID[int CertIndex] = { read=FCertCAKeyID };

Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertCRLDistributionPoints Property (SOAPVerifier Component)

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

Syntax

__property String CertCRLDistributionPoints[int CertIndex] = { read=FCertCRLDistributionPoints };

Default Value

""

Remarks

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertCurve Property (SOAPVerifier Component)

Specifies the elliptic curve of the EC public key.

Syntax

__property String CertCurve[int CertIndex] = { read=FCertCurve };

Default Value

""

Remarks

Specifies the elliptic curve of the EC public key.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertFingerprint Property (SOAPVerifier Component)

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

__property DynamicArray CertFingerprint[int CertIndex] = { read=FCertFingerprint };

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertFriendlyName Property (SOAPVerifier Component)

Contains an associated alias (friendly name) of the certificate.

Syntax

__property String CertFriendlyName[int CertIndex] = { read=FCertFriendlyName };

Default Value

""

Remarks

Contains an associated alias (friendly name) of the certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertHandle Property (SOAPVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 CertHandle[int CertIndex] = { read=FCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Long64

CertHashAlgorithm Property (SOAPVerifier Component)

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .

Syntax

__property String CertHashAlgorithm[int CertIndex] = { read=FCertHashAlgorithm };

Default Value

""

Remarks

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertIssuer Property (SOAPVerifier Component)

The common name of the certificate issuer (CA), typically a company name.

Syntax

__property String CertIssuer[int CertIndex] = { read=FCertIssuer };

Default Value

""

Remarks

The common name of the certificate issuer (CA), typically a company name.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertIssuerRDN Property (SOAPVerifier Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Syntax

__property String CertIssuerRDN[int CertIndex] = { read=FCertIssuerRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertKeyAlgorithm Property (SOAPVerifier Component)

Specifies the public key algorithm of this certificate.

Syntax

__property String CertKeyAlgorithm[int CertIndex] = { read=FCertKeyAlgorithm };

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertKeyBits Property (SOAPVerifier Component)

Returns the length of the public key.

Syntax

__property int CertKeyBits[int CertIndex] = { read=FCertKeyBits };

Default Value

0

Remarks

Returns the length of the public key.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Integer

CertKeyFingerprint Property (SOAPVerifier Component)

Returns a fingerprint of the public key contained in the certificate.

Syntax

__property DynamicArray CertKeyFingerprint[int CertIndex] = { read=FCertKeyFingerprint };

Remarks

Returns a fingerprint of the public key contained in the certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertKeyUsage Property (SOAPVerifier Component)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

__property int CertKeyUsage[int CertIndex] = { read=FCertKeyUsage };

Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Integer

CertKeyValid Property (SOAPVerifier Component)

Returns True if the certificate's key is cryptographically valid, and False otherwise.

Syntax

__property bool CertKeyValid[int CertIndex] = { read=FCertKeyValid };

Default Value

false

Remarks

Returns True if the certificate's key is cryptographically valid, and False otherwise.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

CertOCSPLocations Property (SOAPVerifier Component)

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

Syntax

__property String CertOCSPLocations[int CertIndex] = { read=FCertOCSPLocations };

Default Value

""

Remarks

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertPolicyIDs Property (SOAPVerifier Component)

Contains identifiers (OIDs) of the applicable certificate policies.

Syntax

__property String CertPolicyIDs[int CertIndex] = { read=FCertPolicyIDs };

Default Value

""

Remarks

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertPublicKeyBytes Property (SOAPVerifier Component)

Contains the certificate's public key in DER format.

Syntax

__property DynamicArray CertPublicKeyBytes[int CertIndex] = { read=FCertPublicKeyBytes };

Remarks

Contains the certificate's public key in DER format.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertSelfSigned Property (SOAPVerifier Component)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

__property bool CertSelfSigned[int CertIndex] = { read=FCertSelfSigned };

Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

CertSerialNumber Property (SOAPVerifier Component)

Returns the certificate's serial number.

Syntax

__property DynamicArray CertSerialNumber[int CertIndex] = { read=FCertSerialNumber };

Remarks

Returns the certificate's serial number.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertSigAlgorithm Property (SOAPVerifier Component)

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

__property String CertSigAlgorithm[int CertIndex] = { read=FCertSigAlgorithm };

Default Value

""

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertSubject Property (SOAPVerifier Component)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

__property String CertSubject[int CertIndex] = { read=FCertSubject };

Default Value

""

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertSubjectKeyID Property (SOAPVerifier Component)

Contains a unique identifier (fingerprint) of the certificate's private key.

Syntax

__property DynamicArray CertSubjectKeyID[int CertIndex] = { read=FCertSubjectKeyID };

Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertSubjectRDN Property (SOAPVerifier Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Syntax

__property String CertSubjectRDN[int CertIndex] = { read=FCertSubjectRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertValidFrom Property (SOAPVerifier Component)

The time point at which the certificate becomes valid, in UTC.

Syntax

__property String CertValidFrom[int CertIndex] = { read=FCertValidFrom };

Default Value

""

Remarks

The time point at which the certificate becomes valid, in UTC.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertValidTo Property (SOAPVerifier Component)

The time point at which the certificate expires, in UTC.

Syntax

__property String CertValidTo[int CertIndex] = { read=FCertValidTo };

Default Value

""

Remarks

The time point at which the certificate expires, in UTC.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CRLCount Property (SOAPVerifier Component)

The number of records in the CRL arrays.

Syntax

__property int CRLCount = { read=FCRLCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• CRLBytes
• CRLHandle
• CRLIssuer
• CRLIssuerRDN
• CRLLocation
• CRLNextUpdate
• CRLThisUpdate

The array indices start at 0 and end at CRLCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

CRLBytes Property (SOAPVerifier Component)

Returns the raw CRL data in DER format.

Syntax

__property DynamicArray CRLBytes[int CRLIndex] = { read=FCRLBytes };

Remarks

Returns the raw CRL data in DER format.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CRLHandle Property (SOAPVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 CRLHandle[int CRLIndex] = { read=FCRLHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

Long64

CRLIssuer Property (SOAPVerifier Component)

The common name of the CRL issuer (CA), typically a company name.

Syntax

__property String CRLIssuer[int CRLIndex] = { read=FCRLIssuer };

Default Value

""

Remarks

The common name of the CRL issuer (CA), typically a company name.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLIssuerRDN Property (SOAPVerifier Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.

Syntax

__property String CRLIssuerRDN[int CRLIndex] = { read=FCRLIssuerRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLLocation Property (SOAPVerifier Component)

The URL that the CRL was downloaded from.

Syntax

__property String CRLLocation[int CRLIndex] = { read=FCRLLocation };

Default Value

""

Remarks

The URL that the CRL was downloaded from.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLNextUpdate Property (SOAPVerifier Component)

The planned time and date of the next version of this CRL to be published.

Syntax

__property String CRLNextUpdate[int CRLIndex] = { read=FCRLNextUpdate };

Default Value

""

Remarks

The planned time and date of the next version of this CRL to be published.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLThisUpdate Property (SOAPVerifier Component)

The date and time at which this version of the CRL was published.

Syntax

__property String CRLThisUpdate[int CRLIndex] = { read=FCRLThisUpdate };

Default Value

""

Remarks

The date and time at which this version of the CRL was published.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

Encoding Property (SOAPVerifier Component)

Specifies XML encoding.

Syntax

__property String Encoding = { read=FEncoding, write=FSetEncoding };

Default Value

""

Remarks

Use this property to specify the encoding to apply to the XML documents.

Data Type

String

FIPSMode Property (SOAPVerifier Component)

Reserved.

Syntax

__property bool FIPSMode = { read=FFIPSMode, write=FSetFIPSMode };

Default Value

false

Remarks

This property is reserved for future use.

Data Type

Boolean

IgnoreChainValidationErrors Property (SOAPVerifier Component)

Makes the component tolerant to chain validation errors.

Syntax

__property bool IgnoreChainValidationErrors = { read=FIgnoreChainValidationErrors, write=FSetIgnoreChainValidationErrors };

Default Value

false

Remarks

If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.

Data Type

Boolean

InputBytes Property (SOAPVerifier Component)

Use this property to pass the input to component in byte array form.

Syntax

__property DynamicArray InputBytes = { read=FInputBytes, write=FSetInputBytes };

Remarks

Assign a byte array containing the data to be processed to this property.

This property is not available at design time.

Data Type

Byte Array

InputFile Property (SOAPVerifier Component)

A path to the signed SOAP message.

Syntax

__property String InputFile = { read=FInputFile, write=FSetInputFile };

Default Value

""

Remarks

Provide a path to the SOAP message to be verified.

Data Type

String

KnownCertCount Property (SOAPVerifier Component)

The number of records in the KnownCert arrays.

Syntax

__property int KnownCertCount = { read=FKnownCertCount, write=FSetKnownCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• KnownCertBytes
• KnownCertHandle

The array indices start at 0 and end at KnownCertCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCertBytes Property (SOAPVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray KnownCertBytes[int KnownCertIndex] = { read=FKnownCertBytes };

Remarks

Returns the raw certificate data in DER format.

The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCertHandle Property (SOAPVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 KnownCertHandle[int KnownCertIndex] = { read=FKnownCertHandle, write=FSetKnownCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is not available at design time.

Data Type

Long64

KnownCRLCount Property (SOAPVerifier Component)

The number of records in the KnownCRL arrays.

Syntax

__property int KnownCRLCount = { read=FKnownCRLCount, write=FSetKnownCRLCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• KnownCRLBytes
• KnownCRLHandle

The array indices start at 0 and end at KnownCRLCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCRLBytes Property (SOAPVerifier Component)

Returns the raw CRL data in DER format.

Syntax

__property DynamicArray KnownCRLBytes[int KnownCRLIndex] = { read=FKnownCRLBytes };

Remarks

Returns the raw CRL data in DER format.

The KnownCRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCRLHandle Property (SOAPVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 KnownCRLHandle[int KnownCRLIndex] = { read=FKnownCRLHandle, write=FSetKnownCRLHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The KnownCRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is not available at design time.

Data Type

Long64

KnownOCSPCount Property (SOAPVerifier Component)

The number of records in the KnownOCSP arrays.

Syntax

__property int KnownOCSPCount = { read=FKnownOCSPCount, write=FSetKnownOCSPCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• KnownOCSPBytes
• KnownOCSPHandle

The array indices start at 0 and end at KnownOCSPCount - 1.

This property is not available at design time.

Data Type

Integer

KnownOCSPBytes Property (SOAPVerifier Component)

A buffer containing the raw OCSP response data.

Syntax

__property DynamicArray KnownOCSPBytes[int KnownOCSPIndex] = { read=FKnownOCSPBytes };

Remarks

A buffer containing the raw OCSP response data.

The KnownOCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownOCSPHandle Property (SOAPVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 KnownOCSPHandle[int KnownOCSPIndex] = { read=FKnownOCSPHandle, write=FSetKnownOCSPHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The KnownOCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is not available at design time.

Data Type

Long64

OCSPCount Property (SOAPVerifier Component)

The number of records in the OCSP arrays.

Syntax

__property int OCSPCount = { read=FOCSPCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• OCSPBytes
• OCSPHandle
• OCSPIssuer
• OCSPIssuerRDN
• OCSPLocation
• OCSPProducedAt

The array indices start at 0 and end at OCSPCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

OCSPBytes Property (SOAPVerifier Component)

A buffer containing the raw OCSP response data.

Syntax

__property DynamicArray OCSPBytes[int OCSPIndex] = { read=FOCSPBytes };

Remarks

A buffer containing the raw OCSP response data.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

OCSPHandle Property (SOAPVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 OCSPHandle[int OCSPIndex] = { read=FOCSPHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

Long64

OCSPIssuer Property (SOAPVerifier Component)

Indicates the issuer of this response (a CA or its authorized representative).

Syntax

__property String OCSPIssuer[int OCSPIndex] = { read=FOCSPIssuer };

Default Value

""

Remarks

Indicates the issuer of this response (a CA or its authorized representative).

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OCSPIssuerRDN Property (SOAPVerifier Component)

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

Syntax

__property String OCSPIssuerRDN[int OCSPIndex] = { read=FOCSPIssuerRDN };

Default Value

""

Remarks

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OCSPLocation Property (SOAPVerifier Component)

The location of the OCSP responder.

Syntax

__property String OCSPLocation[int OCSPIndex] = { read=FOCSPLocation };

Default Value

""

Remarks

The location of the OCSP responder.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OCSPProducedAt Property (SOAPVerifier Component)

Specifies the time when the response was produced, in UTC.

Syntax

__property String OCSPProducedAt[int OCSPIndex] = { read=FOCSPProducedAt };

Default Value

""

Remarks

Specifies the time when the response was produced, in UTC.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OfflineMode Property (SOAPVerifier Component)

Switches the component to offline mode.

Syntax

__property bool OfflineMode = { read=FOfflineMode, write=FSetOfflineMode };

Default Value

false

Remarks

When working in offline mode, the component restricts itself from using any online revocation information sources, such as CRL or OCSP responders.

Offline mode may be useful if there is a need to verify the completeness of the validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.

Data Type

Boolean

OutputBytes Property (SOAPVerifier Component)

Use this property to read the output the component object has produced.

Syntax

__property DynamicArray OutputBytes = { read=FOutputBytes };

Remarks

Read the contents of this property after the operation has completed to read the produced output. This property will only be set if the OutputFile and OutputStream properties had not been assigned.

This property is read-only and not available at design time.

Data Type

Byte Array

OutputFile Property (SOAPVerifier Component)

A file where the extracted SOAP message is to be saved.

Syntax

__property String OutputFile = { read=FOutputFile, write=FSetOutputFile };

Default Value

""

Remarks

Provide a path to the file where the updated SOAP message should be saved.

Data Type

String

Profile Property (SOAPVerifier Component)

Specifies a pre-defined profile to apply when creating the signature.

Syntax

__property String Profile = { read=FProfile, write=FSetProfile };

Default Value

""

Remarks

Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile.

Data Type

String

ProxyAddress Property (SOAPVerifier Component)

The IP address of the proxy server.

Syntax

__property String ProxyAddress = { read=FProxyAddress, write=FSetProxyAddress };

Default Value

""

Remarks

The IP address of the proxy server.

Data Type

String

ProxyAuthentication Property (SOAPVerifier Component)

The authentication type used by the proxy server.

Syntax

__property TsbxSOAPVerifierProxyAuthentications ProxyAuthentication = { read=FProxyAuthentication, write=FSetProxyAuthentication };

enum TsbxSOAPVerifierProxyAuthentications {
  patNoAuthentication=0,
  patBasic=1,
  patDigest=2,
  patNTLM=3
};

Default Value

patNoAuthentication

Remarks

The authentication type used by the proxy server.

Data Type

Integer

ProxyPassword Property (SOAPVerifier Component)

The password to authenticate to the proxy server.

Syntax

__property String ProxyPassword = { read=FProxyPassword, write=FSetProxyPassword };

Default Value

""

Remarks

The password to authenticate to the proxy server.

Data Type

String

ProxyPort Property (SOAPVerifier Component)

The port on the proxy server to connect to.

Syntax

__property int ProxyPort = { read=FProxyPort, write=FSetProxyPort };

Default Value

0

Remarks

The port on the proxy server to connect to.

Data Type

Integer

ProxyProxyType Property (SOAPVerifier Component)

The type of the proxy server.

Syntax

__property TsbxSOAPVerifierProxyProxyTypes ProxyProxyType = { read=FProxyProxyType, write=FSetProxyProxyType };

enum TsbxSOAPVerifierProxyProxyTypes {
  cptNone=0,
  cptSocks4=1,
  cptSocks5=2,
  cptWebTunnel=3,
  cptHTTP=4
};

Default Value

cptNone

Remarks

The type of the proxy server.

The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.

Data Type

Integer

ProxyRequestHeaders Property (SOAPVerifier Component)

Contains HTTP request headers for WebTunnel and HTTP proxy.

Syntax

__property String ProxyRequestHeaders = { read=FProxyRequestHeaders, write=FSetProxyRequestHeaders };

Default Value

""

Remarks

Contains HTTP request headers for WebTunnel and HTTP proxy.

Data Type

String

ProxyResponseBody Property (SOAPVerifier Component)

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Syntax

__property String ProxyResponseBody = { read=FProxyResponseBody, write=FSetProxyResponseBody };

Default Value

""

Remarks

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Data Type

String

ProxyResponseHeaders Property (SOAPVerifier Component)

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Syntax

__property String ProxyResponseHeaders = { read=FProxyResponseHeaders, write=FSetProxyResponseHeaders };

Default Value

""

Remarks

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Data Type

String

ProxyUseIPv6 Property (SOAPVerifier Component)

Specifies whether IPv6 should be used when connecting through the proxy.

Syntax

__property bool ProxyUseIPv6 = { read=FProxyUseIPv6, write=FSetProxyUseIPv6 };

Default Value

false

Remarks

Specifies whether IPv6 should be used when connecting through the proxy.

Data Type

Boolean

ProxyUseProxy Property (SOAPVerifier Component)

Enables or disables proxy-driven connection.

Syntax

__property bool ProxyUseProxy = { read=FProxyUseProxy, write=FSetProxyUseProxy };

Default Value

false

Remarks

Enables or disables proxy-driven connection.

Data Type

Boolean

ProxyUsername Property (SOAPVerifier Component)

Specifies the username credential for proxy authentication.

Syntax

__property String ProxyUsername = { read=FProxyUsername, write=FSetProxyUsername };

Default Value

""

Remarks

Specifies the username credential for proxy authentication.

Data Type

String

ReferenceCount Property (SOAPVerifier Component)

The number of records in the Reference arrays.

Syntax

__property int ReferenceCount = { read=FReferenceCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• ReferenceAutoGenerateElementId
• ReferenceCanonicalizationMethod
• ReferenceCustomElementId
• ReferenceDigestValue
• ReferenceHandle
• ReferenceHashAlgorithm
• ReferenceHasURI
• ReferenceID
• ReferenceInclusiveNamespacesPrefixList
• ReferenceReferenceType
• ReferenceSignatureIndex
• ReferenceTargetData
• ReferenceTargetType
• ReferenceTargetXMLElement
• ReferenceURI
• ReferenceUseBase64Transform
• ReferenceUseEnvelopedSignatureTransform
• ReferenceUseXPathFilter2Transform
• ReferenceUseXPathTransform
• ReferenceXPathExpression
• ReferenceXPathFilter2Expressions
• ReferenceXPathFilter2Filters
• ReferenceXPathFilter2PrefixList
• ReferenceXPathPrefixList

The array indices start at 0 and end at ReferenceCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

ReferenceAutoGenerateElementId Property (SOAPVerifier Component)

Specifies whether the identifier (ID) attribute for a referenced (target) element should be auto-generated during signing.

Syntax

__property bool ReferenceAutoGenerateElementId[int ReferenceIndex] = { read=FReferenceAutoGenerateElementId };

Default Value

false

Remarks

Specifies whether the identifier (ID) attribute for a referenced (target) element should be auto-generated during signing. Used when the referenced element doesn't have an ID and CustomElementId and URI properties are empty.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

Boolean

ReferenceCanonicalizationMethod Property (SOAPVerifier Component)

Use this property to specify the canonicalization method for the transform of the reference.

Syntax

__property TsbxSOAPVerifierReferenceCanonicalizationMethods ReferenceCanonicalizationMethod[int ReferenceIndex] = { read=FReferenceCanonicalizationMethod };

enum TsbxSOAPVerifierReferenceCanonicalizationMethods {
  cxcmNone=0,
  cxcmCanon=1,
  cxcmCanonComment=2,
  cxcmExclCanon=3,
  cxcmExclCanonComment=4,
  cxcmMinCanon=5,
  cxcmCanon_v1_1=6,
  cxcmCanonComment_v1_1=7
};

Default Value

cxcmNone

Remarks

Use this property to specify the canonicalization method for the transform of the reference. Use cxcmNone value to not to include canonicalization transform in transform chain. See XML-Signature Syntax and Processing specification for details.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

Integer

ReferenceCustomElementId Property (SOAPVerifier Component)

Specifies a custom identifier (ID) attribute for a referenced (target) element that will be set on signing.

Syntax

__property String ReferenceCustomElementId[int ReferenceIndex] = { read=FReferenceCustomElementId };

Default Value

""

Remarks

Specifies a custom identifier (ID) attribute for a referenced (target) element that will be set on signing. Used when the referenced element doesn't have an ID and URI property is empty.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

String

ReferenceDigestValue Property (SOAPVerifier Component)

Use this property to get or set the value of the digest calculated over the referenced data.

Syntax

__property DynamicArray ReferenceDigestValue[int ReferenceIndex] = { read=FReferenceDigestValue };

Remarks

Use this property to get or set the value of the digest calculated over the referenced data.

This property is optional and should be set only if you don't provide the actual data via TargetData or URI. If the data is set, then you don't need to set DigestValue since it will be calculated automatically.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ReferenceHandle Property (SOAPVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 ReferenceHandle[int ReferenceIndex] = { read=FReferenceHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

Long64

ReferenceHashAlgorithm Property (SOAPVerifier Component)

Specifies the hash algorithm to be used.

Syntax

__property String ReferenceHashAlgorithm[int ReferenceIndex] = { read=FReferenceHashAlgorithm };

Default Value

"SHA256"

Remarks

Specifies the hash algorithm to be used.

Supported values:

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

String

ReferenceHasURI Property (SOAPVerifier Component)

Specifies whether the URI is set (even when it is empty).

Syntax

__property bool ReferenceHasURI[int ReferenceIndex] = { read=FReferenceHasURI };

Default Value

true

Remarks

Specifies whether the URI is set (even when it is empty).

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

Boolean

ReferenceID Property (SOAPVerifier Component)

A user-defined identifier (ID) attribute of this Reference element.

Syntax

__property String ReferenceID[int ReferenceIndex] = { read=FReferenceID };

Default Value

""

Remarks

A user-defined identifier (ID) attribute of this Reference element.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

String

ReferenceInclusiveNamespacesPrefixList Property (SOAPVerifier Component)

Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the reference.

Syntax

__property String ReferenceInclusiveNamespacesPrefixList[int ReferenceIndex] = { read=FReferenceInclusiveNamespacesPrefixList };

Default Value

""

Remarks

Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the reference. See XML-Signature Syntax and Processing specification for details.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

String

ReferenceReferenceType Property (SOAPVerifier Component)

The Reference's type attribute as defined in XMLDSIG specification.

Syntax

__property String ReferenceReferenceType[int ReferenceIndex] = { read=FReferenceReferenceType };

Default Value

""

Remarks

The Reference's type attribute as defined in XMLDSIG specification.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

String

ReferenceSignatureIndex Property (SOAPVerifier Component)

Returns the index of the owner signature, if applicable.

Syntax

__property int ReferenceSignatureIndex[int ReferenceIndex] = { read=FReferenceSignatureIndex };

Default Value

-1

Remarks

Returns the index of the owner signature, if applicable.

Use this property to establish the index of the associated signature object in the signature collection.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

Integer

ReferenceTargetData Property (SOAPVerifier Component)

Contains the referenced external data when the digest value is not explicitly specified.

Syntax

__property DynamicArray ReferenceTargetData[int ReferenceIndex] = { read=FReferenceTargetData };

Remarks

Contains the referenced external data when the digest value is not explicitly specified.

This property is optional and should only be set if you reference the external data via URI, and you don't provide the digest value explicitly via DigestValue.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ReferenceTargetType Property (SOAPVerifier Component)

The reference's target type to use.

Syntax

__property TsbxSOAPVerifierReferenceTargetTypes ReferenceTargetType[int ReferenceIndex] = { read=FReferenceTargetType };

enum TsbxSOAPVerifierReferenceTargetTypes {
  rttAuto=0,
  rttXMLElement=1,
  rttData=2,
  rttURI=3
};

Default Value

rttAuto

Remarks

The reference's target type to use.

Use this property to specify the reference's target type to use when forming the signature.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

Integer

ReferenceTargetXMLElement Property (SOAPVerifier Component)

This property specifies the referenced XML element.

Syntax

__property String ReferenceTargetXMLElement[int ReferenceIndex] = { read=FReferenceTargetXMLElement };

Default Value

""

Remarks

This property specifies the referenced XML element. Used when the URI property is not set. In this case, the URI value is generated based on the ID of the referenced (target) XML element. If the URI property is set, this property is ignored until the ResolveReference event.

Supported values are:

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

String

ReferenceURI Property (SOAPVerifier Component)

Use this property to get or set the URL which references the data.

Syntax

__property String ReferenceURI[int ReferenceIndex] = { read=FReferenceURI };

Default Value

""

Remarks

Use this property to get or set the URL which references the data. If the data is external, the application must set either TargetData or DigestValue. If TargetData is set, the digest is calculated automatically unless it is explicitly set by the application via DigestValue.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

String

ReferenceUseBase64Transform Property (SOAPVerifier Component)

Specifies whether Base64 transform is included in transform chain.

Syntax

__property bool ReferenceUseBase64Transform[int ReferenceIndex] = { read=FReferenceUseBase64Transform };

Default Value

false

Remarks

Specifies whether Base64 transform is included in transform chain.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

Boolean

ReferenceUseEnvelopedSignatureTransform Property (SOAPVerifier Component)

Specifies whether enveloped signature transform is included in transform chain.

Syntax

__property bool ReferenceUseEnvelopedSignatureTransform[int ReferenceIndex] = { read=FReferenceUseEnvelopedSignatureTransform };

Default Value

false

Remarks

Specifies whether enveloped signature transform is included in transform chain.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

Boolean

ReferenceUseXPathFilter2Transform Property (SOAPVerifier Component)

Specifies whether XPath Filter 2.

Syntax

__property bool ReferenceUseXPathFilter2Transform[int ReferenceIndex] = { read=FReferenceUseXPathFilter2Transform };

Default Value

false

Remarks

Specifies whether XPath Filter 2.0 transform is included in transform chain.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

Boolean

ReferenceUseXPathTransform Property (SOAPVerifier Component)

Specifies whether XPath transform is included in transform chain.

Syntax

__property bool ReferenceUseXPathTransform[int ReferenceIndex] = { read=FReferenceUseXPathTransform };

Default Value

false

Remarks

Specifies whether XPath transform is included in transform chain.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

Boolean

ReferenceXPathExpression Property (SOAPVerifier Component)

Use this property to specify XPath expression for XPath transform of the reference.

Syntax

__property String ReferenceXPathExpression[int ReferenceIndex] = { read=FReferenceXPathExpression };

Default Value

""

Remarks

Use this property to specify XPath expression for XPath transform of the reference.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

String

ReferenceXPathFilter2Expressions Property (SOAPVerifier Component)

Use this property to specify XPointer expression(s) for XPath Filter 2.

Syntax

__property String ReferenceXPathFilter2Expressions[int ReferenceIndex] = { read=FReferenceXPathFilter2Expressions };

Default Value

""

Remarks

Use this property to specify XPointer expression(s) for XPath Filter 2.0 transform of the reference.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

String

ReferenceXPathFilter2Filters Property (SOAPVerifier Component)

Use this property to specify XPointer filter(s) for XPath Filter 2.

Syntax

__property String ReferenceXPathFilter2Filters[int ReferenceIndex] = { read=FReferenceXPathFilter2Filters };

Default Value

""

Remarks

Use this property to specify XPointer filter(s) for XPath Filter 2.0 transform of the reference. The prefix list is comma-separated.

Supported values:

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

String

ReferenceXPathFilter2PrefixList Property (SOAPVerifier Component)

Use this property to specify a prefix list for XPath Filter 2.

Syntax

__property String ReferenceXPathFilter2PrefixList[int ReferenceIndex] = { read=FReferenceXPathFilter2PrefixList };

Default Value

""

Remarks

Use this property to specify a prefix list for XPath Filter 2.0 transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from XPathNamespaces property.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

String

ReferenceXPathPrefixList Property (SOAPVerifier Component)

Use this property to specify a prefix list for XPath transform of the reference.

Syntax

__property String ReferenceXPathPrefixList[int ReferenceIndex] = { read=FReferenceXPathPrefixList };

Default Value

""

Remarks

Use this property to specify a prefix list for XPath transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from XPathNamespaces property.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

String

RevocationCheck Property (SOAPVerifier Component)

Specifies the kind(s) of revocation check to perform for all chain certificates.

Syntax

__property TsbxSOAPVerifierRevocationChecks RevocationCheck = { read=FRevocationCheck, write=FSetRevocationCheck };

enum TsbxSOAPVerifierRevocationChecks {
  crcNone=0,
  crcAuto=1,
  crcAllCRL=2,
  crcAllOCSP=3,
  crcAllCRLAndOCSP=4,
  crcAnyCRL=5,
  crcAnyOCSP=6,
  crcAnyCRLOrOCSP=7,
  crcAnyOCSPOrCRL=8
};

Default Value

crcAuto

Remarks

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

Certificate Revocation Lists (CRLs) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

Data Type

Integer

SignatureCount Property (SOAPVerifier Component)

The number of records in the Signature arrays.

Syntax

__property int SignatureCount = { read=FSignatureCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• SignatureCanonicalizationMethod
• SignatureCertificateIndex
• SignatureChainValidationDetails
• SignatureChainValidationResult
• SignatureClaimedSigningTime
• SignatureHandle
• SignatureHashAlgorithm
• SignatureIssuerRDN
• SignatureLastArchivalTime
• SignaturePolicyHash
• SignaturePolicyHashAlgorithm
• SignaturePolicyID
• SignaturePolicyURI
• SignatureSerialNumber
• SignatureSignatureBytes
• SignatureSignatureType
• SignatureSignatureValidationResult
• SignatureSubjectKeyID
• SignatureSubjectRDN
• SignatureTimestamped
• SignatureValidatedSigningTime
• SignatureValidationLog
• SignatureXAdES
• SignatureXAdESForm
• SignatureXAdESVersion
• SignatureXMLElement

The array indices start at 0 and end at SignatureCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

SignatureCanonicalizationMethod Property (SOAPVerifier Component)

The XML canonicalization method that was used for signing.

Syntax

__property TsbxSOAPVerifierSignatureCanonicalizationMethods SignatureCanonicalizationMethod[int SignatureIndex] = { read=FSignatureCanonicalizationMethod };

enum TsbxSOAPVerifierSignatureCanonicalizationMethods {
  cxcmNone=0,
  cxcmCanon=1,
  cxcmCanonComment=2,
  cxcmExclCanon=3,
  cxcmExclCanonComment=4,
  cxcmMinCanon=5,
  cxcmCanon_v1_1=6,
  cxcmCanonComment_v1_1=7
};

Default Value

cxcmNone

Remarks

The XML canonicalization method that was used for signing.

Supported canonicalization methods:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureCertificateIndex Property (SOAPVerifier Component)

Returns the index of the signing certificate in the Certificates collection Use this property to look up the signing certificate in the Certificates collection.

Syntax

__property int SignatureCertificateIndex[int SignatureIndex] = { read=FSignatureCertificateIndex };

Default Value

-1

Remarks

Returns the index of the signing certificate in the Certificates collection

Use this property to look up the signing certificate in the Certificates collection.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureChainValidationDetails Property (SOAPVerifier Component)

The details of a certificate chain validation outcome.

Syntax

__property int SignatureChainValidationDetails[int SignatureIndex] = { read=FSignatureChainValidationDetails };

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureChainValidationResult Property (SOAPVerifier Component)

The outcome of a certificate chain validation routine.

Syntax

__property TsbxSOAPVerifierSignatureChainValidationResults SignatureChainValidationResult[int SignatureIndex] = { read=FSignatureChainValidationResult };

enum TsbxSOAPVerifierSignatureChainValidationResults {
  cvtValid=0,
  cvtValidButUntrusted=1,
  cvtInvalid=2,
  cvtCantBeEstablished=3
};

Default Value

cvtValid

Remarks

The outcome of a certificate chain validation routine.

Available options:

Use the ValidationLog property to access the detailed validation log.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureClaimedSigningTime Property (SOAPVerifier Component)

The signing time from the signer's computer.

Syntax

__property String SignatureClaimedSigningTime[int SignatureIndex] = { read=FSignatureClaimedSigningTime };

Default Value

""

Remarks

The signing time from the signer's computer.

Use this property to provide the signature production time. The claimed time is not supported by a trusted source; it may be inaccurate, forfeited, or wrong, and as such is usually taken for informational purposes only by verifiers. Use timestamp servers to embed verifiable trusted timestamps. The time is in UTC.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureHandle Property (SOAPVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 SignatureHandle[int SignatureIndex] = { read=FSignatureHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Long64

SignatureHashAlgorithm Property (SOAPVerifier Component)

The hash algorithm used for signing.

Syntax

__property String SignatureHashAlgorithm[int SignatureIndex] = { read=FSignatureHashAlgorithm };

Default Value

"Unknown"

Remarks

The hash algorithm used for signing.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureIssuerRDN Property (SOAPVerifier Component)

The Relative Distinguished Name of the signing certificate's issuer.

Syntax

__property String SignatureIssuerRDN[int SignatureIndex] = { read=FSignatureIssuerRDN };

Default Value

""

Remarks

The Relative Distinguished Name of the signing certificate's issuer.

A collection of information, in the form of [OID, Value] pairs, about the company that issued the signing certificate.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureLastArchivalTime Property (SOAPVerifier Component)

Indicates the most recent archival time of an archived signature This property returns the time of the most recent archival timestamp applied to the signature.

Syntax

__property String SignatureLastArchivalTime[int SignatureIndex] = { read=FSignatureLastArchivalTime };

Default Value

""

Remarks

Indicates the most recent archival time of an archived signature

This property returns the time of the most recent archival timestamp applied to the signature. This property only makes sense for 'archived' (e.g. CAdES-A) signatures. Time is in UTC.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignaturePolicyHash Property (SOAPVerifier Component)

The signature policy hash value.

Syntax

__property String SignaturePolicyHash[int SignatureIndex] = { read=FSignaturePolicyHash };

Default Value

""

Remarks

The signature policy hash value.

Use this property to get the signature policy hash from EPES signatures

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignaturePolicyHashAlgorithm Property (SOAPVerifier Component)

The algorithm that was used to calculate the signature policy hash Use this property to get or set the hash algorithm used to calculate the signature policy hash.

Syntax

__property String SignaturePolicyHashAlgorithm[int SignatureIndex] = { read=FSignaturePolicyHashAlgorithm };

Default Value

""

Remarks

The algorithm that was used to calculate the signature policy hash

Use this property to get or set the hash algorithm used to calculate the signature policy hash. Read the actual hash value from SignaturePolicyHash.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignaturePolicyID Property (SOAPVerifier Component)

The policy ID that was included or to be included into the signature.

Syntax

__property String SignaturePolicyID[int SignatureIndex] = { read=FSignaturePolicyID };

Default Value

""

Remarks

The policy ID that was included or to be included into the signature.

Use this property to retrieve the signature policy identifier from EPES signatures.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignaturePolicyURI Property (SOAPVerifier Component)

The signature policy URI that was included in the signature.

Syntax

__property String SignaturePolicyURI[int SignatureIndex] = { read=FSignaturePolicyURI };

Default Value

""

Remarks

The signature policy URI that was included in the signature.

Use this property to set or retrieve the URI of the signature policy from EPES signatures.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureSerialNumber Property (SOAPVerifier Component)

The serial number of the timestamp.

Syntax

__property DynamicArray SignatureSerialNumber[int SignatureIndex] = { read=FSignatureSerialNumber };

Remarks

The serial number of the timestamp.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

SignatureSignatureBytes Property (SOAPVerifier Component)

Returns the binary representation of the SOAP signature.

Syntax

__property DynamicArray SignatureSignatureBytes[int SignatureIndex] = { read=FSignatureSignatureBytes };

Remarks

Returns the binary representation of the SOAP signature.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

SignatureSignatureType Property (SOAPVerifier Component)

The SOAP signature type to use.

Syntax

__property TsbxSOAPVerifierSignatureSignatureTypes SignatureSignatureType[int SignatureIndex] = { read=FSignatureSignatureType };

enum TsbxSOAPVerifierSignatureSignatureTypes {
  sstUnknown=0,
  sstWSSSignature=1,
  sstSOAPSignature=2
};

Default Value

sstWSSSignature

Remarks

The SOAP signature type to use.

Use this property to specify the signature type to use when forming the signature.

Supported values:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureSignatureValidationResult Property (SOAPVerifier Component)

Contains the signature validation result.

Syntax

__property TsbxSOAPVerifierSignatureSignatureValidationResults SignatureSignatureValidationResult[int SignatureIndex] = { read=FSignatureSignatureValidationResult };

enum TsbxSOAPVerifierSignatureSignatureValidationResults {
  xsvValid=0,
  xsvUnknown=1,
  xsvCorrupted=2,
  xsvSignerNotFound=3,
  xsvFailure=4,
  xsvReferenceCorrupted=5
};

Default Value

xsvValid

Remarks

Contains the signature validation result.

Use this property to check the result of the most recent XML signature validation.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureSubjectKeyID Property (SOAPVerifier Component)

Contains the subject key identifier of the signing certificate.

Syntax

__property DynamicArray SignatureSubjectKeyID[int SignatureIndex] = { read=FSignatureSubjectKeyID };

Remarks

Contains the subject key identifier of the signing certificate.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented by a SHA-1 hash of the bit string of the subject public key.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

SignatureSubjectRDN Property (SOAPVerifier Component)

Contains information about the person owning the signing certificate.

Syntax

__property String SignatureSubjectRDN[int SignatureIndex] = { read=FSignatureSubjectRDN };

Default Value

""

Remarks

Contains information about the person owning the signing certificate. Only certificates with given subject information will be enumerated during the search operation. Information is stored in the form of [Object Identifier, Value] pairs.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureTimestamped Property (SOAPVerifier Component)

Use this property to establish whether the signature contains an embedded timestamp.

Syntax

__property bool SignatureTimestamped[int SignatureIndex] = { read=FSignatureTimestamped };

Default Value

false

Remarks

Use this property to establish whether the signature contains an embedded timestamp.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Boolean

SignatureValidatedSigningTime Property (SOAPVerifier Component)

Contains the certified signing time.

Syntax

__property String SignatureValidatedSigningTime[int SignatureIndex] = { read=FSignatureValidatedSigningTime };

Default Value

""

Remarks

Contains the certified signing time.

Use this property to obtain the signing time as certified by a timestamp from a trusted timestamping authority. This property is only non-empty if there was a valid timestamp included in the signature.

SignatureClaimedSigningTime returns a non-trusted signing time from the signer's computer.

Both times are in UTC.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureValidationLog Property (SOAPVerifier Component)

Contains the complete log of the certificate validation routine.

Syntax

__property String SignatureValidationLog[int SignatureIndex] = { read=FSignatureValidationLog };

Default Value

""

Remarks

Contains the complete log of the certificate validation routine.

Use this property to access the chain validation log produced by the component. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureXAdES Property (SOAPVerifier Component)

Specifies whether the document contains an advanced signature (XAdES).

Syntax

__property bool SignatureXAdES[int SignatureIndex] = { read=FSignatureXAdES };

Default Value

true

Remarks

Specifies whether the document contains an advanced signature (XAdES).

Use this property to check whether the document is signed with XAdES or XML-DSIG only.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Boolean

SignatureXAdESForm Property (SOAPVerifier Component)

Specifies which form of XAdES should be produced.

Syntax

__property TsbxSOAPVerifierSignatureXAdESForms SignatureXAdESForm[int SignatureIndex] = { read=FSignatureXAdESForm };

enum TsbxSOAPVerifierSignatureXAdESForms {
  xafNone=0,
  xafBasic=1,
  xafBES=2,
  xafEPES=3,
  xafT=4,
  xafC=5,
  xafX=6,
  xafXL=7,
  xafA=8,
  xafExtendedBES=9,
  xafExtendedEPES=10,
  xafExtendedT=11,
  xafExtendedC=12,
  xafExtendedX=13,
  xafExtendedXLong=14,
  xafExtendedXL=15,
  xafExtendedA=16
};

Default Value

xafNone

Remarks

Specifies which form of XAdES should be produced.

Use this property to specify the form (level) of advanced electronic signature to be produced.

The supported forms are:

* XAdES-E-* forms are supported starting from XAdES v1.3.2

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureXAdESVersion Property (SOAPVerifier Component)

Specifies XAdES version.

Syntax

__property TsbxSOAPVerifierSignatureXAdESVersions SignatureXAdESVersion[int SignatureIndex] = { read=FSignatureXAdESVersion };

enum TsbxSOAPVerifierSignatureXAdESVersions {
  xavUnknown=0,
  xav111=1,
  xav122=2,
  xav132=3,
  xav141=4
};

Default Value

xav132

Remarks

Specifies XAdES version.

This property specifies the version of the XAdES specification the signature should comply with. For the form of XAdES, use XAdESForm.

The supported vesions are:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureXMLElement Property (SOAPVerifier Component)

Specifies the XML element where to save the signature or containing the signature.

Syntax

__property String SignatureXMLElement[int SignatureIndex] = { read=FSignatureXMLElement };

Default Value

""

Remarks

Specifies the XML element where to save the signature or containing the signature.

This property specifies the XML element where to save the electronic signature or that contains the signature to be validated.

Supported values are:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SocketDNSMode Property (SOAPVerifier Component)

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

Syntax

__property TsbxSOAPVerifierSocketDNSModes SocketDNSMode = { read=FSocketDNSMode, write=FSetSocketDNSMode };

enum TsbxSOAPVerifierSocketDNSModes {
  dmAuto=0,
  dmPlatform=1,
  dmOwn=2,
  dmOwnSecure=3
};

Default Value

dmAuto

Remarks

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

Data Type

Integer

SocketDNSPort Property (SOAPVerifier Component)

Specifies the port number to be used for sending queries to the DNS server.

Syntax

__property int SocketDNSPort = { read=FSocketDNSPort, write=FSetSocketDNSPort };

Default Value

0

Remarks

Specifies the port number to be used for sending queries to the DNS server.

Data Type

Integer

SocketDNSQueryTimeout Property (SOAPVerifier Component)

The timeout (in milliseconds) for each DNS query.

Syntax

__property int SocketDNSQueryTimeout = { read=FSocketDNSQueryTimeout, write=FSetSocketDNSQueryTimeout };

Default Value

0

Remarks

The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.

Data Type

Integer

SocketDNSServers Property (SOAPVerifier Component)

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Syntax

__property String SocketDNSServers = { read=FSocketDNSServers, write=FSetSocketDNSServers };

Default Value

""

Remarks

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Data Type

String

SocketDNSTotalTimeout Property (SOAPVerifier Component)

The timeout (in milliseconds) for the whole resolution process.

Syntax

__property int SocketDNSTotalTimeout = { read=FSocketDNSTotalTimeout, write=FSetSocketDNSTotalTimeout };

Default Value

0

Remarks

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.

Data Type

Integer

SocketIncomingSpeedLimit Property (SOAPVerifier Component)

The maximum number of bytes to read from the socket, per second.

Syntax

__property int SocketIncomingSpeedLimit = { read=FSocketIncomingSpeedLimit, write=FSetSocketIncomingSpeedLimit };

Default Value

0

Remarks

The maximum number of bytes to read from the socket, per second.

Data Type

Integer

SocketLocalAddress Property (SOAPVerifier Component)

The local network interface to bind the socket to.

Syntax

__property String SocketLocalAddress = { read=FSocketLocalAddress, write=FSetSocketLocalAddress };

Default Value

""

Remarks

The local network interface to bind the socket to.

Data Type

String

SocketLocalPort Property (SOAPVerifier Component)

The local port number to bind the socket to.

Syntax

__property int SocketLocalPort = { read=FSocketLocalPort, write=FSetSocketLocalPort };

Default Value

0

Remarks

The local port number to bind the socket to.

Data Type

Integer

SocketOutgoingSpeedLimit Property (SOAPVerifier Component)

The maximum number of bytes to write to the socket, per second.

Syntax

__property int SocketOutgoingSpeedLimit = { read=FSocketOutgoingSpeedLimit, write=FSetSocketOutgoingSpeedLimit };

Default Value

0

Remarks

The maximum number of bytes to write to the socket, per second.

Data Type

Integer

SocketTimeout Property (SOAPVerifier Component)

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Syntax

__property int SocketTimeout = { read=FSocketTimeout, write=FSetSocketTimeout };

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

Data Type

Integer

SocketUseIPv6 Property (SOAPVerifier Component)

Enables or disables IP protocol version 6.

Syntax

__property bool SocketUseIPv6 = { read=FSocketUseIPv6, write=FSetSocketUseIPv6 };

Default Value

false

Remarks

Enables or disables IP protocol version 6.

Data Type

Boolean

TimestampCount Property (SOAPVerifier Component)

The number of records in the Timestamp arrays.

Syntax

__property int TimestampCount = { read=FTimestampCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• TimestampAccuracy
• TimestampBytes
• TimestampCertificateIndex
• TimestampChainValidationDetails
• TimestampChainValidationResult
• TimestampHashAlgorithm
• TimestampSerialNumber
• TimestampSignatureIndex
• TimestampTime
• TimestampTimestampType
• TimestampTSAName
• TimestampValidationLog
• TimestampValidationResult

The array indices start at 0 and end at TimestampCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

TimestampAccuracy Property (SOAPVerifier Component)

This property indicates the accuracy of the included time mark, in microseconds.

Syntax

__property __int64 TimestampAccuracy[int TimestampIndex] = { read=FTimestampAccuracy };

Default Value

0

Remarks

This field indicates the accuracy of the included time mark, in microseconds.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Long64

TimestampBytes Property (SOAPVerifier Component)

Returns the raw timestamp data in DER format.

Syntax

__property DynamicArray TimestampBytes[int TimestampIndex] = { read=FTimestampBytes };

Remarks

Returns the raw timestamp data in DER format.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TimestampCertificateIndex Property (SOAPVerifier Component)

Returns the index of the TSA certificate in the Certificates collection.

Syntax

__property int TimestampCertificateIndex[int TimestampIndex] = { read=FTimestampCertificateIndex };

Default Value

-1

Remarks

Returns the index of the TSA certificate in the Certificates collection.

Use this property to look up the TSA certificate in the Certificates collection.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampChainValidationDetails Property (SOAPVerifier Component)

The details of a certificate chain validation outcome.

Syntax

__property int TimestampChainValidationDetails[int TimestampIndex] = { read=FTimestampChainValidationDetails };

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampChainValidationResult Property (SOAPVerifier Component)

The outcome of a certificate chain validation routine.

Syntax

__property TsbxSOAPVerifierTimestampChainValidationResults TimestampChainValidationResult[int TimestampIndex] = { read=FTimestampChainValidationResult };

enum TsbxSOAPVerifierTimestampChainValidationResults {
  cvtValid=0,
  cvtValidButUntrusted=1,
  cvtInvalid=2,
  cvtCantBeEstablished=3
};

Default Value

cvtValid

Remarks

The outcome of a certificate chain validation routine.

Available options:

Use the ValidationLog property to access the detailed validation log.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampHashAlgorithm Property (SOAPVerifier Component)

Returns the timestamp's hash algorithm.

Syntax

__property String TimestampHashAlgorithm[int TimestampIndex] = { read=FTimestampHashAlgorithm };

Default Value

""

Remarks

Returns the timestamp's hash algorithm.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampSerialNumber Property (SOAPVerifier Component)

Returns the timestamp's serial number.

Syntax

__property DynamicArray TimestampSerialNumber[int TimestampIndex] = { read=FTimestampSerialNumber };

Remarks

Returns the timestamp's serial number.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TimestampSignatureIndex Property (SOAPVerifier Component)

Returns the index of the owner signature, if applicable.

Syntax

__property int TimestampSignatureIndex[int TimestampIndex] = { read=FTimestampSignatureIndex };

Default Value

-1

Remarks

Returns the index of the owner signature, if applicable.

Use this property to establish the index of the associated signature object in the signature collection.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampTime Property (SOAPVerifier Component)

The time point incorporated into the timestamp.

Syntax

__property String TimestampTime[int TimestampIndex] = { read=FTimestampTime };

Default Value

""

Remarks

The time point incorporated into the timestamp.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampTimestampType Property (SOAPVerifier Component)

Returns the type of the timestamp.

Syntax

__property int TimestampTimestampType[int TimestampIndex] = { read=FTimestampTimestampType };

Default Value

0

Remarks

Returns the type of the timestamp.

Available options:

Not all of the above timestamp types can be supported by a specific signature technology used (CAdES, PDF, XAdES).

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampTSAName Property (SOAPVerifier Component)

This value uniquely identifies the Timestamp Authority (TSA).

Syntax

__property String TimestampTSAName[int TimestampIndex] = { read=FTimestampTSAName };

Default Value

""

Remarks

This value uniquely identifies the Timestamp Authority (TSA).

This property provides information about the entity that manages the TSA.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampValidationLog Property (SOAPVerifier Component)

Contains the TSA certificate chain validation log.

Syntax

__property String TimestampValidationLog[int TimestampIndex] = { read=FTimestampValidationLog };

Default Value

""

Remarks

Contains the TSA certificate chain validation log. This information is extremely useful if the timestamp validation fails.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampValidationResult Property (SOAPVerifier Component)

Contains the timestamp validation outcome.

Syntax

__property TsbxSOAPVerifierTimestampValidationResults TimestampValidationResult[int TimestampIndex] = { read=FTimestampValidationResult };

enum TsbxSOAPVerifierTimestampValidationResults {
  svtValid=0,
  svtUnknown=1,
  svtCorrupted=2,
  svtSignerNotFound=3,
  svtFailure=4
};

Default Value

svtValid

Remarks

Contains the timestamp validation outcome.

Use this property to check the result of the most recent timestamp validation.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TLSClientCertCount Property (SOAPVerifier Component)

The number of records in the TLSClientCert arrays.

Syntax

__property int TLSClientCertCount = { read=FTLSClientCertCount, write=FSetTLSClientCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• TLSClientCertBytes
• TLSClientCertHandle

The array indices start at 0 and end at TLSClientCertCount - 1.

This property is not available at design time.

Data Type

Integer

TLSClientCertBytes Property (SOAPVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray TLSClientCertBytes[int TLSClientCertIndex] = { read=FTLSClientCertBytes };

Remarks

Returns the raw certificate data in DER format.

The TLSClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSClientCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TLSClientCertHandle Property (SOAPVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 TLSClientCertHandle[int TLSClientCertIndex] = { read=FTLSClientCertHandle, write=FSetTLSClientCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The TLSClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSClientCertCount property.

This property is not available at design time.

Data Type

Long64

TLSServerCertCount Property (SOAPVerifier Component)

The number of records in the TLSServerCert arrays.

Syntax

__property int TLSServerCertCount = { read=FTLSServerCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• TLSServerCertBytes
• TLSServerCertHandle

The array indices start at 0 and end at TLSServerCertCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

TLSServerCertBytes Property (SOAPVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray TLSServerCertBytes[int TLSServerCertIndex] = { read=FTLSServerCertBytes };

Remarks

Returns the raw certificate data in DER format.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TLSServerCertHandle Property (SOAPVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 TLSServerCertHandle[int TLSServerCertIndex] = { read=FTLSServerCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

Long64

TLSAutoValidateCertificates Property (SOAPVerifier Component)

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Syntax

__property bool TLSAutoValidateCertificates = { read=FTLSAutoValidateCertificates, write=FSetTLSAutoValidateCertificates };

Default Value

true

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Data Type

Boolean

TLSBaseConfiguration Property (SOAPVerifier Component)

Selects the base configuration for the TLS settings.

Syntax

__property TsbxSOAPVerifierTLSBaseConfigurations TLSBaseConfiguration = { read=FTLSBaseConfiguration, write=FSetTLSBaseConfiguration };

enum TsbxSOAPVerifierTLSBaseConfigurations {
  stpcDefault=0,
  stpcCompatible=1,
  stpcComprehensiveInsecure=2,
  stpcHighlySecure=3
};

Default Value

stpcDefault

Remarks

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.

Data Type

Integer

TLSCiphersuites Property (SOAPVerifier Component)

A list of ciphersuites separated with commas or semicolons.

Syntax

__property String TLSCiphersuites = { read=FTLSCiphersuites, write=FSetTLSCiphersuites };

Default Value

""

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by TLSBaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

• NULL_NULL_NULL
• RSA_NULL_MD5
• RSA_NULL_SHA
• RSA_RC4_MD5
• RSA_RC4_SHA
• RSA_RC2_MD5
• RSA_IDEA_MD5
• RSA_IDEA_SHA
• RSA_DES_MD5
• RSA_DES_SHA
• RSA_3DES_MD5
• RSA_3DES_SHA
• RSA_AES128_SHA
• RSA_AES256_SHA
• DH_DSS_DES_SHA
• DH_DSS_3DES_SHA
• DH_DSS_AES128_SHA
• DH_DSS_AES256_SHA
• DH_RSA_DES_SHA
• DH_RSA_3DES_SHA
• DH_RSA_AES128_SHA
• DH_RSA_AES256_SHA
• DHE_DSS_DES_SHA
• DHE_DSS_3DES_SHA
• DHE_DSS_AES128_SHA
• DHE_DSS_AES256_SHA
• DHE_RSA_DES_SHA
• DHE_RSA_3DES_SHA
• DHE_RSA_AES128_SHA
• DHE_RSA_AES256_SHA
• DH_ANON_RC4_MD5
• DH_ANON_DES_SHA
• DH_ANON_3DES_SHA
• DH_ANON_AES128_SHA
• DH_ANON_AES256_SHA
• RSA_RC2_MD5_EXPORT
• RSA_RC4_MD5_EXPORT
• RSA_DES_SHA_EXPORT
• DH_DSS_DES_SHA_EXPORT
• DH_RSA_DES_SHA_EXPORT
• DHE_DSS_DES_SHA_EXPORT
• DHE_RSA_DES_SHA_EXPORT
• DH_ANON_RC4_MD5_EXPORT
• DH_ANON_DES_SHA_EXPORT
• RSA_CAMELLIA128_SHA
• DH_DSS_CAMELLIA128_SHA
• DH_RSA_CAMELLIA128_SHA
• DHE_DSS_CAMELLIA128_SHA
• DHE_RSA_CAMELLIA128_SHA
• DH_ANON_CAMELLIA128_SHA
• RSA_CAMELLIA256_SHA
• DH_DSS_CAMELLIA256_SHA
• DH_RSA_CAMELLIA256_SHA
• DHE_DSS_CAMELLIA256_SHA
• DHE_RSA_CAMELLIA256_SHA
• DH_ANON_CAMELLIA256_SHA
• PSK_RC4_SHA
• PSK_3DES_SHA
• PSK_AES128_SHA
• PSK_AES256_SHA
• DHE_PSK_RC4_SHA
• DHE_PSK_3DES_SHA
• DHE_PSK_AES128_SHA
• DHE_PSK_AES256_SHA
• RSA_PSK_RC4_SHA
• RSA_PSK_3DES_SHA
• RSA_PSK_AES128_SHA
• RSA_PSK_AES256_SHA
• RSA_SEED_SHA
• DH_DSS_SEED_SHA
• DH_RSA_SEED_SHA
• DHE_DSS_SEED_SHA
• DHE_RSA_SEED_SHA
• DH_ANON_SEED_SHA
• SRP_SHA_3DES_SHA
• SRP_SHA_RSA_3DES_SHA
• SRP_SHA_DSS_3DES_SHA
• SRP_SHA_AES128_SHA
• SRP_SHA_RSA_AES128_SHA
• SRP_SHA_DSS_AES128_SHA
• SRP_SHA_AES256_SHA
• SRP_SHA_RSA_AES256_SHA
• SRP_SHA_DSS_AES256_SHA
• ECDH_ECDSA_NULL_SHA
• ECDH_ECDSA_RC4_SHA
• ECDH_ECDSA_3DES_SHA
• ECDH_ECDSA_AES128_SHA
• ECDH_ECDSA_AES256_SHA
• ECDHE_ECDSA_NULL_SHA
• ECDHE_ECDSA_RC4_SHA
• ECDHE_ECDSA_3DES_SHA
• ECDHE_ECDSA_AES128_SHA
• ECDHE_ECDSA_AES256_SHA
• ECDH_RSA_NULL_SHA
• ECDH_RSA_RC4_SHA
• ECDH_RSA_3DES_SHA
• ECDH_RSA_AES128_SHA
• ECDH_RSA_AES256_SHA
• ECDHE_RSA_NULL_SHA
• ECDHE_RSA_RC4_SHA
• ECDHE_RSA_3DES_SHA
• ECDHE_RSA_AES128_SHA
• ECDHE_RSA_AES256_SHA
• ECDH_ANON_NULL_SHA
• ECDH_ANON_RC4_SHA
• ECDH_ANON_3DES_SHA
• ECDH_ANON_AES128_SHA
• ECDH_ANON_AES256_SHA
• RSA_NULL_SHA256
• RSA_AES128_SHA256
• RSA_AES256_SHA256
• DH_DSS_AES128_SHA256
• DH_RSA_AES128_SHA256
• DHE_DSS_AES128_SHA256
• DHE_RSA_AES128_SHA256
• DH_DSS_AES256_SHA256
• DH_RSA_AES256_SHA256
• DHE_DSS_AES256_SHA256
• DHE_RSA_AES256_SHA256
• DH_ANON_AES128_SHA256
• DH_ANON_AES256_SHA256
• RSA_AES128_GCM_SHA256
• RSA_AES256_GCM_SHA384
• DHE_RSA_AES128_GCM_SHA256
• DHE_RSA_AES256_GCM_SHA384
• DH_RSA_AES128_GCM_SHA256
• DH_RSA_AES256_GCM_SHA384
• DHE_DSS_AES128_GCM_SHA256
• DHE_DSS_AES256_GCM_SHA384
• DH_DSS_AES128_GCM_SHA256
• DH_DSS_AES256_GCM_SHA384
• DH_ANON_AES128_GCM_SHA256
• DH_ANON_AES256_GCM_SHA384
• ECDHE_ECDSA_AES128_SHA256
• ECDHE_ECDSA_AES256_SHA384
• ECDH_ECDSA_AES128_SHA256
• ECDH_ECDSA_AES256_SHA384
• ECDHE_RSA_AES128_SHA256
• ECDHE_RSA_AES256_SHA384
• ECDH_RSA_AES128_SHA256
• ECDH_RSA_AES256_SHA384
• ECDHE_ECDSA_AES128_GCM_SHA256
• ECDHE_ECDSA_AES256_GCM_SHA384
• ECDH_ECDSA_AES128_GCM_SHA256
• ECDH_ECDSA_AES256_GCM_SHA384
• ECDHE_RSA_AES128_GCM_SHA256
• ECDHE_RSA_AES256_GCM_SHA384
• ECDH_RSA_AES128_GCM_SHA256
• ECDH_RSA_AES256_GCM_SHA384
• PSK_AES128_GCM_SHA256
• PSK_AES256_GCM_SHA384
• DHE_PSK_AES128_GCM_SHA256
• DHE_PSK_AES256_GCM_SHA384
• RSA_PSK_AES128_GCM_SHA256
• RSA_PSK_AES256_GCM_SHA384
• PSK_AES128_SHA256
• PSK_AES256_SHA384
• PSK_NULL_SHA256
• PSK_NULL_SHA384
• DHE_PSK_AES128_SHA256
• DHE_PSK_AES256_SHA384
• DHE_PSK_NULL_SHA256
• DHE_PSK_NULL_SHA384
• RSA_PSK_AES128_SHA256
• RSA_PSK_AES256_SHA384
• RSA_PSK_NULL_SHA256
• RSA_PSK_NULL_SHA384
• RSA_CAMELLIA128_SHA256
• DH_DSS_CAMELLIA128_SHA256
• DH_RSA_CAMELLIA128_SHA256
• DHE_DSS_CAMELLIA128_SHA256
• DHE_RSA_CAMELLIA128_SHA256
• DH_ANON_CAMELLIA128_SHA256
• RSA_CAMELLIA256_SHA256
• DH_DSS_CAMELLIA256_SHA256
• DH_RSA_CAMELLIA256_SHA256
• DHE_DSS_CAMELLIA256_SHA256
• DHE_RSA_CAMELLIA256_SHA256
• DH_ANON_CAMELLIA256_SHA256
• ECDHE_ECDSA_CAMELLIA128_SHA256
• ECDHE_ECDSA_CAMELLIA256_SHA384
• ECDH_ECDSA_CAMELLIA128_SHA256
• ECDH_ECDSA_CAMELLIA256_SHA384
• ECDHE_RSA_CAMELLIA128_SHA256
• ECDHE_RSA_CAMELLIA256_SHA384
• ECDH_RSA_CAMELLIA128_SHA256
• ECDH_RSA_CAMELLIA256_SHA384
• RSA_CAMELLIA128_GCM_SHA256
• RSA_CAMELLIA256_GCM_SHA384
• DHE_RSA_CAMELLIA128_GCM_SHA256
• DHE_RSA_CAMELLIA256_GCM_SHA384
• DH_RSA_CAMELLIA128_GCM_SHA256
• DH_RSA_CAMELLIA256_GCM_SHA384
• DHE_DSS_CAMELLIA128_GCM_SHA256
• DHE_DSS_CAMELLIA256_GCM_SHA384
• DH_DSS_CAMELLIA128_GCM_SHA256
• DH_DSS_CAMELLIA256_GCM_SHA384
• DH_anon_CAMELLIA128_GCM_SHA256
• DH_anon_CAMELLIA256_GCM_SHA384
• ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
• ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
• ECDH_ECDSA_CAMELLIA128_GCM_SHA256
• ECDH_ECDSA_CAMELLIA256_GCM_SHA384
• ECDHE_RSA_CAMELLIA128_GCM_SHA256
• ECDHE_RSA_CAMELLIA256_GCM_SHA384
• ECDH_RSA_CAMELLIA128_GCM_SHA256
• ECDH_RSA_CAMELLIA256_GCM_SHA384
• PSK_CAMELLIA128_GCM_SHA256
• PSK_CAMELLIA256_GCM_SHA384
• DHE_PSK_CAMELLIA128_GCM_SHA256
• DHE_PSK_CAMELLIA256_GCM_SHA384
• RSA_PSK_CAMELLIA128_GCM_SHA256
• RSA_PSK_CAMELLIA256_GCM_SHA384
• PSK_CAMELLIA128_SHA256
• PSK_CAMELLIA256_SHA384
• DHE_PSK_CAMELLIA128_SHA256
• DHE_PSK_CAMELLIA256_SHA384
• RSA_PSK_CAMELLIA128_SHA256
• RSA_PSK_CAMELLIA256_SHA384
• ECDHE_PSK_CAMELLIA128_SHA256
• ECDHE_PSK_CAMELLIA256_SHA384
• ECDHE_PSK_RC4_SHA
• ECDHE_PSK_3DES_SHA
• ECDHE_PSK_AES128_SHA
• ECDHE_PSK_AES256_SHA
• ECDHE_PSK_AES128_SHA256
• ECDHE_PSK_AES256_SHA384
• ECDHE_PSK_NULL_SHA
• ECDHE_PSK_NULL_SHA256
• ECDHE_PSK_NULL_SHA384
• ECDHE_RSA_CHACHA20_POLY1305_SHA256
• ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
• DHE_RSA_CHACHA20_POLY1305_SHA256
• PSK_CHACHA20_POLY1305_SHA256
• ECDHE_PSK_CHACHA20_POLY1305_SHA256
• DHE_PSK_CHACHA20_POLY1305_SHA256
• RSA_PSK_CHACHA20_POLY1305_SHA256
• AES128_GCM_SHA256
• AES256_GCM_SHA384
• CHACHA20_POLY1305_SHA256
• AES128_CCM_SHA256
• AES128_CCM8_SHA256

Data Type

String

TLSECCurves Property (SOAPVerifier Component)

Defines the elliptic curves to enable.

Syntax

__property String TLSECCurves = { read=FTLSECCurves, write=FSetTLSECCurves };

Default Value

""

Remarks

Defines the elliptic curves to enable.

Data Type

String

TLSExtensions Property (SOAPVerifier Component)

Provides access to TLS extensions.

Syntax

__property String TLSExtensions = { read=FTLSExtensions, write=FSetTLSExtensions };

Default Value

""

Remarks

Provides access to TLS extensions.

Data Type

String

TLSForceResumeIfDestinationChanges Property (SOAPVerifier Component)

Whether to force TLS session resumption when the destination address changes.

Syntax

__property bool TLSForceResumeIfDestinationChanges = { read=FTLSForceResumeIfDestinationChanges, write=FSetTLSForceResumeIfDestinationChanges };

Default Value

false

Remarks

Whether to force TLS session resumption when the destination address changes.

Data Type

Boolean

TLSPreSharedIdentity Property (SOAPVerifier Component)

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

__property String TLSPreSharedIdentity = { read=FTLSPreSharedIdentity, write=FSetTLSPreSharedIdentity };

Default Value

""

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

This property is not available at design time.

Data Type

String

TLSPreSharedKey Property (SOAPVerifier Component)

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Syntax

__property String TLSPreSharedKey = { read=FTLSPreSharedKey, write=FSetTLSPreSharedKey };

Default Value

""

Remarks

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

This property is not available at design time.

Data Type

String

TLSPreSharedKeyCiphersuite Property (SOAPVerifier Component)

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Syntax

__property String TLSPreSharedKeyCiphersuite = { read=FTLSPreSharedKeyCiphersuite, write=FSetTLSPreSharedKeyCiphersuite };

Default Value

""

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Data Type

String

TLSRenegotiationAttackPreventionMode Property (SOAPVerifier Component)

Selects the renegotiation attack prevention mechanism.

Syntax

__property TsbxSOAPVerifierTLSRenegotiationAttackPreventionModes TLSRenegotiationAttackPreventionMode = { read=FTLSRenegotiationAttackPreventionMode, write=FSetTLSRenegotiationAttackPreventionMode };

enum TsbxSOAPVerifierTLSRenegotiationAttackPreventionModes {
  crapmCompatible=0,
  crapmStrict=1,
  crapmAuto=2
};

Default Value

crapmCompatible

Remarks

Selects the renegotiation attack prevention mechanism.

The following options are available:

Data Type

Integer

TLSRevocationCheck Property (SOAPVerifier Component)

Specifies the kind(s) of revocation check to perform.

Syntax

__property TsbxSOAPVerifierTLSRevocationChecks TLSRevocationCheck = { read=FTLSRevocationCheck, write=FSetTLSRevocationCheck };

enum TsbxSOAPVerifierTLSRevocationChecks {
  crcNone=0,
  crcAuto=1,
  crcAllCRL=2,
  crcAllOCSP=3,
  crcAllCRLAndOCSP=4,
  crcAnyCRL=5,
  crcAnyOCSP=6,
  crcAnyCRLOrOCSP=7,
  crcAnyOCSPOrCRL=8
};

Default Value

crcAuto

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

This property is not available at design time.

Data Type

Integer

TLSSSLOptions Property (SOAPVerifier Component)

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Syntax

__property int TLSSSLOptions = { read=FTLSSSLOptions, write=FSetTLSSSLOptions };

Default Value

16

Remarks

Various SSL (TLS) protocol options, set of

Data Type

Integer

TLSTLSMode Property (SOAPVerifier Component)

Specifies the TLS mode to use.

Syntax

__property TsbxSOAPVerifierTLSTLSModes TLSTLSMode = { read=FTLSTLSMode, write=FSetTLSTLSMode };

enum TsbxSOAPVerifierTLSTLSModes {
  smDefault=0,
  smNoTLS=1,
  smExplicitTLS=2,
  smImplicitTLS=3,
  smMixedTLS=4
};

Default Value

smDefault

Remarks

Specifies the TLS mode to use.

Data Type

Integer

TLSUseExtendedMasterSecret Property (SOAPVerifier Component)

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Syntax

__property bool TLSUseExtendedMasterSecret = { read=FTLSUseExtendedMasterSecret, write=FSetTLSUseExtendedMasterSecret };

Default Value

false

Remarks

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Data Type

Boolean

TLSUseSessionResumption Property (SOAPVerifier Component)

Enables or disables the TLS session resumption capability.

Syntax

__property bool TLSUseSessionResumption = { read=FTLSUseSessionResumption, write=FSetTLSUseSessionResumption };

Default Value

false

Remarks

Enables or disables the TLS session resumption capability.

Data Type

Boolean

TLSVersions Property (SOAPVerifier Component)

The SSL/TLS versions to enable by default.

Syntax

__property int TLSVersions = { read=FTLSVersions, write=FSetTLSVersions };

Default Value

16

Remarks

The SSL/TLS versions to enable by default.

Data Type

Integer

TrustedCertCount Property (SOAPVerifier Component)

The number of records in the TrustedCert arrays.

Syntax

__property int TrustedCertCount = { read=FTrustedCertCount, write=FSetTrustedCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• TrustedCertBytes
• TrustedCertHandle

The array indices start at 0 and end at TrustedCertCount - 1.

This property is not available at design time.

Data Type

Integer

TrustedCertBytes Property (SOAPVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray TrustedCertBytes[int TrustedCertIndex] = { read=FTrustedCertBytes };

Remarks

Returns the raw certificate data in DER format.

The TrustedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TrustedCertHandle Property (SOAPVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 TrustedCertHandle[int TrustedCertIndex] = { read=FTrustedCertHandle, write=FSetTrustedCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The TrustedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is not available at design time.

Data Type

Long64

ValidationMoment Property (SOAPVerifier Component)

The time point at which signature validity is to be established.

Syntax

__property String ValidationMoment = { read=FValidationMoment, write=FSetValidationMoment };

Default Value

""

Remarks

Use this property to specify the moment in time at which signature validity should be established. The time is in UTC. Leave the setting empty to stick to the default moment (either the signature creation time or the current time).

The validity of the same signature may differ depending on the time point chosen due to temporal changes in chain validities, revocation statuses, and timestamp times.

Data Type

String

NamespaceCount Property (SOAPVerifier Component)

The number of records in the Namespace arrays.

Syntax

__property int NamespaceCount = { read=FNamespaceCount, write=FSetNamespaceCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• NamespacePrefix
• NamespaceURI

The array indices start at 0 and end at NamespaceCount - 1.

This property is not available at design time.

Data Type

Integer

NamespacePrefix Property (SOAPVerifier Component)

A user-defined prefix value of a namespace.

Syntax

__property String NamespacePrefix[int NamespaceIndex] = { read=FNamespacePrefix, write=FSetNamespacePrefix };

Default Value

""

Remarks

A user-defined prefix value of a namespace.

The NamespaceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the NamespaceCount property.

This property is not available at design time.

Data Type

String

NamespaceURI Property (SOAPVerifier Component)

A user-defined URI value of a namespace.

Syntax

__property String NamespaceURI[int NamespaceIndex] = { read=FNamespaceURI, write=FSetNamespaceURI };

Default Value

""

Remarks

A user-defined URI value of a namespace.

The NamespaceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the NamespaceCount property.

This property is not available at design time.

Data Type

String

Close Method (SOAPVerifier Component)

Closes an opened SOAP message.

Syntax

void __fastcall Close(bool SaveChanges);

Remarks

Use this method to close a previously opened SOAP message. Set SaveChanges to true to apply any changes made.

Config Method (SOAPVerifier Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (SOAPVerifier Component)

Performs an additional action.

Syntax

String __fastcall DoAction(String ActionID, String ActionParams);

Remarks

DoAction is a generic method available in every component. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

GetInnerXML Method (SOAPVerifier Component)

Get the inner XML content of the selected XML element.

Syntax

String __fastcall GetInnerXML(String XPath);

Remarks

Call this method to get the inner XML content of the selected XML element.

GetOuterXML Method (SOAPVerifier Component)

Get the outer XML content of the selected XML element.

Syntax

String __fastcall GetOuterXML(String XPath);

Remarks

Call this method to get the outer XML content of the selected XML element.

GetTextContent Method (SOAPVerifier Component)

Get the text content of the selected XML element.

Syntax

String __fastcall GetTextContent(String XPath);

Remarks

Call this method to get the text content of the selected XML element.

Open Method (SOAPVerifier Component)

Opens a document for verifying or removing signatures.

Syntax

void __fastcall Open();

Remarks

Use this method to open a document for verifying or removing signatures. When finished, call Close to complete or discard the operation.

Revalidate Method (SOAPVerifier Component)

Revalidates a signature in accordance with current settings.

Syntax

void __fastcall Revalidate(int Index);

Remarks

Use this method to re-validate a signature in the opened SOAP message.

SetInnerXML Method (SOAPVerifier Component)

Set the inner XML content of the selected XML element.

Syntax

void __fastcall SetInnerXML(String XPath, String Value);

Remarks

Call this method to set the inner XML content of the selected XML element.

SetTextContent Method (SOAPVerifier Component)

Set the text content of the selected XML element.

Syntax

void __fastcall SetTextContent(String XPath, String Value);

Remarks

Call this method to set the text content of the selected XML element.

Unsign Method (SOAPVerifier Component)

Deletes a signature from the document.

Syntax

void __fastcall Unsign(int SigIndex);

Remarks

Use this method to delete an existing signature from the document. Use SigIndex parameter to specify the signature to be removed.

Verify Method (SOAPVerifier Component)

Verifies a digitally signed SOAP message.

Syntax

void __fastcall Verify();

Remarks

Call this method to verify a signed SOAP message. Provide the message via InputFile or InputStream property.

ChainElementDownload Event (SOAPVerifier Component)

Fires when there is a need to download a chain element from an online source.

Syntax

typedef struct {
  int Kind;
  String CertRDN;
  String CACertRDN;
  String Location;
  int Action;
} TsbxSOAPVerifierChainElementDownloadEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierChainElementDownloadEvent)(System::TObject* Sender, TsbxSOAPVerifierChainElementDownloadEventParams *e);
__property TsbxSOAPVerifierChainElementDownloadEvent OnChainElementDownload = { read=FOnChainElementDownload, write=FOnChainElementDownload };

Remarks

Subscribe to this event to be notified about validation element retrievals. Use the Action parameter to suppress the download if required.

ChainElementNeeded Event (SOAPVerifier Component)

Fires when an element required to validate the chain was not located.

Syntax

typedef struct {
  int Kind;
  String CertRDN;
  String CACertRDN;
} TsbxSOAPVerifierChainElementNeededEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierChainElementNeededEvent)(System::TObject* Sender, TsbxSOAPVerifierChainElementNeededEventParams *e);
__property TsbxSOAPVerifierChainElementNeededEvent OnChainElementNeeded = { read=FOnChainElementNeeded, write=FOnChainElementNeeded };

Remarks

Subscribe to this event to be notified about missing validation elements. Use the KnownCRLs, KnownCertificates, and KnownOCSPs properties in the event handler to provide the missing piece.

ChainElementStore Event (SOAPVerifier Component)

This event is fired when a chain element (certificate, CRL, or OCSP response) should be stored along with a signature.

Syntax

typedef struct {
  int Kind;
  DynamicArray Body;
  String URI;
} TsbxSOAPVerifierChainElementStoreEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierChainElementStoreEvent)(System::TObject* Sender, TsbxSOAPVerifierChainElementStoreEventParams *e);
__property TsbxSOAPVerifierChainElementStoreEvent OnChainElementStore = { read=FOnChainElementStore, write=FOnChainElementStore };

Remarks

This event could occur if you are verifying XAdES-C form or higher. The Body parameter contains the element in binary form that should be stored along with a signature. Use the URI parameter to provide an URI of the stored element.

ChainValidated Event (SOAPVerifier Component)

Reports the completion of a certificate chain validation.

Syntax

typedef struct {
  int Index;
  String SubjectRDN;
  int ValidationResult;
  int ValidationDetails;
} TsbxSOAPVerifierChainValidatedEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierChainValidatedEvent)(System::TObject* Sender, TsbxSOAPVerifierChainValidatedEventParams *e);
__property TsbxSOAPVerifierChainValidatedEvent OnChainValidated = { read=FOnChainValidated, write=FOnChainValidated };

Remarks

This event is fired when a certificate chain validation routine completes. SubjectRDN identifies the owner of the validated certificate.

ValidationResult set to 0 (zero) indicates successful chain validation.

Any other value reports a failure, and ValidationDetails provides more details on its reasons.

ChainValidationProgress Event (SOAPVerifier Component)

This event is fired multiple times during chain validation to report various stages of the validation procedure.

Syntax

typedef struct {
  String EventKind;
  String CertRDN;
  String CACertRDN;
  int Action;
} TsbxSOAPVerifierChainValidationProgressEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierChainValidationProgressEvent)(System::TObject* Sender, TsbxSOAPVerifierChainValidationProgressEventParams *e);
__property TsbxSOAPVerifierChainValidationProgressEvent OnChainValidationProgress = { read=FOnChainValidationProgress, write=FOnChainValidationProgress };

Remarks

Subscribe to this event to be notified about chain validation progress. Use the Action parameter to alter the validation flow.

The EventKind parameter reports the nature of the event being reported. The CertRDN and CACertRDN parameters report the distinguished names of the certificates that are relevant for the event invocation (one or both can be empty, depending on EventKind). Use the Action parameter to adjust the validation flow.

Error Event (SOAPVerifier Component)

Information about errors during signature verification.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TsbxSOAPVerifierErrorEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierErrorEvent)(System::TObject* Sender, TsbxSOAPVerifierErrorEventParams *e);
__property TsbxSOAPVerifierErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The event is fired in case of exceptional conditions during verification.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to SOAP.

MessageLoaded Event (SOAPVerifier Component)

This event is fired when the message has been loaded into memory.

Syntax

typedef struct {
  bool Cancel;
} TsbxSOAPVerifierMessageLoadedEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierMessageLoadedEvent)(System::TObject* Sender, TsbxSOAPVerifierMessageLoadedEventParams *e);
__property TsbxSOAPVerifierMessageLoadedEvent OnMessageLoaded = { read=FOnMessageLoaded, write=FOnMessageLoaded };

Remarks

The handler for this event is a good place to check message properties, which may be useful when preparing the signature.

Set Cancel to true to terminate message processing on this stage.

Notification Event (SOAPVerifier Component)

This event notifies the application about an underlying control flow event.

Syntax

typedef struct {
  String EventID;
  String EventParam;
} TsbxSOAPVerifierNotificationEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierNotificationEvent)(System::TObject* Sender, TsbxSOAPVerifierNotificationEventParams *e);
__property TsbxSOAPVerifierNotificationEvent OnNotification = { read=FOnNotification, write=FOnNotification };

Remarks

The component fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

ReferenceValidated Event (SOAPVerifier Component)

Marks the end of a reference validation.

Syntax

typedef struct {
  int ReferenceIndex;
  String ID;
  String URI;
  String RefType;
  bool DigestValid;
} TsbxSOAPVerifierReferenceValidatedEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierReferenceValidatedEvent)(System::TObject* Sender, TsbxSOAPVerifierReferenceValidatedEventParams *e);
__property TsbxSOAPVerifierReferenceValidatedEvent OnReferenceValidated = { read=FOnReferenceValidated, write=FOnReferenceValidated };

Remarks

The component fires this event to report completion of a reference validation. A reference is a building block of a signature as it binds signature coverage to a particular piece of the document.

ResolveReference Event (SOAPVerifier Component)

Asks the application to resolve a reference.

Syntax

typedef struct {
  int ReferenceIndex;
  String URI;
} TsbxSOAPVerifierResolveReferenceEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierResolveReferenceEvent)(System::TObject* Sender, TsbxSOAPVerifierResolveReferenceEventParams *e);
__property TsbxSOAPVerifierResolveReferenceEvent OnResolveReference = { read=FOnResolveReference, write=FOnResolveReference };

Remarks

This event is fired when the control could not automatically resolve a reference and requires custom treatment.

URI contains a reference to the data.

ReferenceIndex specifies the index of the reference to process.

Based on the reference's URI the event handler should set either TargetXMLElement or TargetData property of the reference.

SignatureFound Event (SOAPVerifier Component)

Signifies the start of signature validation.

Syntax

typedef struct {
  int Index;
  String IssuerRDN;
  DynamicArray SerialNumber;
  DynamicArray SubjectKeyID;
  bool CertFound;
  bool ValidateSignature;
  bool ValidateChain;
} TsbxSOAPVerifierSignatureFoundEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierSignatureFoundEvent)(System::TObject* Sender, TsbxSOAPVerifierSignatureFoundEventParams *e);
__property TsbxSOAPVerifierSignatureFoundEvent OnSignatureFound = { read=FOnSignatureFound, write=FOnSignatureFound };

Remarks

This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.

The CertFound parameter is set to True if the component has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

SignatureValidated Event (SOAPVerifier Component)

Marks the completion of the signature validation routine.

Syntax

typedef struct {
  int Index;
  String IssuerRDN;
  DynamicArray SerialNumber;
  DynamicArray SubjectKeyID;
  int ValidationResult;
} TsbxSOAPVerifierSignatureValidatedEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierSignatureValidatedEvent)(System::TObject* Sender, TsbxSOAPVerifierSignatureValidatedEventParams *e);
__property TsbxSOAPVerifierSignatureValidatedEvent OnSignatureValidated = { read=FOnSignatureValidated, write=FOnSignatureValidated };

Remarks

This event is fired upon the completion of the signature validation routine, and reports the respective validation result.

Use the IssuerRDN, SerialNumber, and/or SubjectKeyID parameters to identify the signing certificate.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a validation failure.

TimestampFound Event (SOAPVerifier Component)

Signifies the start of a timestamp validation routine.

Syntax

typedef struct {
  int Index;
  String IssuerRDN;
  DynamicArray SerialNumber;
  DynamicArray SubjectKeyID;
  bool CertFound;
  bool ValidateTimestamp;
  bool ValidateChain;
} TsbxSOAPVerifierTimestampFoundEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierTimestampFoundEvent)(System::TObject* Sender, TsbxSOAPVerifierTimestampFoundEventParams *e);
__property TsbxSOAPVerifierTimestampFoundEvent OnTimestampFound = { read=FOnTimestampFound, write=FOnTimestampFound };

Remarks

This event fires for every timestamp identified during signature processing, and reports the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters.

The CertFound parameter is set to True if the component has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Just like with signature validation, timestamp validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

TimestampValidated Event (SOAPVerifier Component)

Reports the completion of the timestamp validation routine.

Syntax

typedef struct {
  int Index;
  String IssuerRDN;
  DynamicArray SerialNumber;
  DynamicArray SubjectKeyID;
  String Time;
  int ValidationResult;
  int ChainValidationResult;
  int ChainValidationDetails;
} TsbxSOAPVerifierTimestampValidatedEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierTimestampValidatedEvent)(System::TObject* Sender, TsbxSOAPVerifierTimestampValidatedEventParams *e);
__property TsbxSOAPVerifierTimestampValidatedEvent OnTimestampValidated = { read=FOnTimestampValidated, write=FOnTimestampValidated };

Remarks

This event is fired upon the completion of the timestamp validation routine, and reports the respective validation result.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a failure.

TLSCertNeeded Event (SOAPVerifier Component)

Fires when a remote TLS party requests a client certificate.

Syntax

typedef struct {
  String Host;
  String CANames;
} TsbxSOAPVerifierTLSCertNeededEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierTLSCertNeededEvent)(System::TObject* Sender, TsbxSOAPVerifierTLSCertNeededEventParams *e);
__property TsbxSOAPVerifierTLSCertNeededEvent OnTLSCertNeeded = { read=FOnTLSCertNeeded, write=FOnTLSCertNeeded };

Remarks

This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames parameter (optional, according to the TLS spec) advises on the accepted issuing CAs.

Use the TLSClientChain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.

This event is preceded by the TLSHandshake event for the given host and, if the certificate was accepted, succeeded by the TLSEstablished event.

TLSCertValidate Event (SOAPVerifier Component)

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Syntax

typedef struct {
  String ServerHost;
  String ServerIP;
  bool Accept;
} TsbxSOAPVerifierTLSCertValidateEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierTLSCertValidateEvent)(System::TObject* Sender, TsbxSOAPVerifierTLSCertValidateEventParams *e);
__property TsbxSOAPVerifierTLSCertValidateEvent OnTLSCertValidate = { read=FOnTLSCertValidate, write=FOnTLSCertValidate };

Remarks

This event is fired during a TLS handshake. Use the TLSServerChain property to access the certificate chain. In general, components may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the component, and can be adjusted if needed.

TLSEstablished Event (SOAPVerifier Component)

Fires when a TLS handshake with Host successfully completes.

Syntax

typedef struct {
  String Host;
  String Version;
  String Ciphersuite;
  DynamicArray ConnectionId;
  bool Abort;
} TsbxSOAPVerifierTLSEstablishedEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierTLSEstablishedEvent)(System::TObject* Sender, TsbxSOAPVerifierTLSEstablishedEventParams *e);
__property TsbxSOAPVerifierTLSEstablishedEvent OnTLSEstablished = { read=FOnTLSEstablished, write=FOnTLSEstablished };

Remarks

The component uses this event to notify the application about a successful completion of a TLS handshake.

The Version, Ciphersuite, and ConnectionId parameters indicate the security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.

TLSHandshake Event (SOAPVerifier Component)

Fires when a new TLS handshake is initiated, before the handshake commences.

Syntax

typedef struct {
  String Host;
  bool Abort;
} TsbxSOAPVerifierTLSHandshakeEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierTLSHandshakeEvent)(System::TObject* Sender, TsbxSOAPVerifierTLSHandshakeEventParams *e);
__property TsbxSOAPVerifierTLSHandshakeEvent OnTLSHandshake = { read=FOnTLSHandshake, write=FOnTLSHandshake };

Remarks

The component uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed by the TLSEstablished event. If the server chooses to request a client certificate, the TLSCertNeeded event will also be fired.

TLSShutdown Event (SOAPVerifier Component)

Reports the graceful closure of a TLS connection.

Syntax

typedef struct {
  String Host;
} TsbxSOAPVerifierTLSShutdownEventParams;
typedef void __fastcall (__closure *TsbxSOAPVerifierTLSShutdownEvent)(System::TObject* Sender, TsbxSOAPVerifierTLSShutdownEventParams *e);
__property TsbxSOAPVerifierTLSShutdownEvent OnTLSShutdown = { read=FOnTLSShutdown, write=FOnTLSShutdown };

Remarks

This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.

Config Settings (SOAPVerifier Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

SOAPVerifier Config Settings

Base Config Settings

Trappable Errors (SOAPVerifier Component)

SOAPVerifier Errors

	1048577   Invalid parameter value (SB_ERROR_INVALID_PARAMETER)
	1048578   Component is configured incorrectly (SB_ERROR_INVALID_SETUP)
	1048579   Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE)
	1048580   Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE)
	1048581   Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY)
	1048581   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER) 
	33554433   Input file does not exist (SB_ERROR_SOAP_INPUTFILE_NOT_EXISTS)
	33554434   Invalid key type (SB_ERROR_SOAP_INVALID_KEY_TYPE)
	33554435   Signature not found (SB_ERROR_SOAP_SIGNATURE_NOT_FOUND)
	33554436   Unsupported signature type (SB_ERROR_SOAP_UNSUPPORTED_SIGNATURE_TYPE)