OCSPManager Class
Properties Methods Events Configuration Settings Errors
The OCSPManager class enables the import, export, and management of OCSP responses.
Syntax
OCSPManager
Remarks
OCSP is a protocol that allows you to verify a certificate's status in real-time, without using Certificate Revocation Lists (CRL).
An OCSP response is a response of the OCSP server to the client's request. As a minimum, it indicates the processing status of the prior request.
Property List
The following is the full list of the properties of the class with short descriptions. Click on the links for further details.
BlockedCertCount | The number of records in the BlockedCert arrays. |
BlockedCertBytes | Returns raw certificate data in DER format. |
BlockedCertHandle | Allows to get or set a 'handle', a unique identifier of the underlying property object. |
CACertBytes | Returns raw certificate data in DER format. |
CACertHandle | Allows to get or set a 'handle', a unique identifier of the underlying property object. |
CertBytes | Returns raw certificate data in DER format. |
CertHandle | Allows to get or set a 'handle', a unique identifier of the underlying property object. |
ClientCertCount | The number of records in the ClientCert arrays. |
ClientCertBytes | Returns raw certificate data in DER format. |
ClientCertHandle | Allows to get or set a 'handle', a unique identifier of the underlying property object. |
ConnInfoAEADCipher | Indicates whether the encryption algorithm used is an AEAD cipher. |
ConnInfoChainValidationDetails | The details of a certificate chain validation outcome. |
ConnInfoChainValidationResult | The outcome of a certificate chain validation routine. |
ConnInfoCiphersuite | The cipher suite employed by this connection. |
ConnInfoClientAuthenticated | Specifies whether client authentication was performed during this connection. |
ConnInfoClientAuthRequested | Specifies whether client authentication was requested during this connection. |
ConnInfoConnectionEstablished | Indicates whether the connection has been established fully. |
ConnInfoConnectionID | The unique identifier assigned to this connection. |
ConnInfoDigestAlgorithm | The digest algorithm used in a TLS-enabled connection. |
ConnInfoEncryptionAlgorithm | The symmetric encryption algorithm used in a TLS-enabled connection. |
ConnInfoExportable | Indicates whether a TLS connection uses a reduced-strength exportable cipher. |
ConnInfoKeyExchangeAlgorithm | The key exchange algorithm used in a TLS-enabled connection. |
ConnInfoKeyExchangeKeyBits | The length of the key exchange key of a TLS-enabled connection. |
ConnInfoNamedECCurve | The elliptic curve used in this connection. |
ConnInfoPFSCipher | Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS). |
ConnInfoPreSharedIdentityHint | A hint professed by the server to help the client select the PSK identity to use. |
ConnInfoPublicKeyBits | The length of the public key. |
ConnInfoResumedSession | Indicates whether a TLS-enabled connection was spawned from another TLS connection. |
ConnInfoSecureConnection | Indicates whether TLS or SSL is enabled for this connection. |
ConnInfoServerAuthenticated | Indicates whether server authentication was performed during a TLS-enabled connection. |
ConnInfoSignatureAlgorithm | The signature algorithm used in a TLS handshake. |
ConnInfoSymmetricBlockSize | The block size of the symmetric algorithm used. |
ConnInfoSymmetricKeyBits | The key length of the symmetric algorithm used. |
ConnInfoTotalBytesReceived | The total number of bytes received over this connection. |
ConnInfoTotalBytesSent | The total number of bytes sent over this connection. |
ConnInfoValidationLog | Contains the server certificate's chain validation log. |
ConnInfoVersion | Indicates the version of SSL/TLS protocol negotiated during this connection. |
EntryCount | The number of records in the Entry arrays. |
EntryHandle | Allows to get or set a 'handle', a unique identifier of the underlying property object. |
FIPSMode | Reserved. |
KnownCertCount | The number of records in the KnownCert arrays. |
KnownCertBytes | Returns raw certificate data in DER format. |
KnownCertHandle | Allows to get or set a 'handle', a unique identifier of the underlying property object. |
KnownCRLCount | The number of records in the KnownCRL arrays. |
KnownCRLBytes | Returns raw CRL data in DER format. |
KnownCRLHandle | Allows to get or set a 'handle', a unique identifier of the underlying property object. |
KnownOCSPCount | The number of records in the KnownOCSP arrays. |
KnownOCSPBytes | Buffer containing raw OCSP response data. |
KnownOCSPHandle | Allows to get or set a 'handle', a unique identifier of the underlying property object. |
OCSPResponseBytes | Buffer containing raw OCSP response data. |
OCSPResponseEntryCount | The number of SingleResponse elements contained in this OCSP response. |
OCSPResponseHandle | Allows to get or set a 'handle', a unique identifier of the underlying property object. |
OCSPResponseIssuer | Indicates the issuer of this response (a CA or its authorized representative). |
OCSPResponseIssuerRDN | Indicates the RDN of the issuer of this response (a CA or its authorized representative). |
OCSPResponseLocation | Location of the OCSP responder. |
OCSPResponseProducedAt | Specifies the time when the response was produced, in UTC. |
ProxyAddress | The IP address of the proxy server. |
ProxyAuthentication | The authentication type used by the proxy server. |
ProxyPassword | The password to authenticate to the proxy server. |
ProxyPort | The port on the proxy server to connect to. |
ProxyProxyType | The type of the proxy server. |
ProxyRequestHeaders | Contains HTTP request headers for WebTunnel and HTTP proxy. |
ProxyResponseBody | Contains the HTTP or HTTPS (WebTunnel) proxy response body. |
ProxyResponseHeaders | Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server. |
ProxyUseIPv6 | Specifies whether IPv6 should be used when connecting through the proxy. |
ProxyUseProxy | Enables or disables proxy-driven connection. |
ProxyUsername | Specifies the username credential for proxy authentication. |
ServerCertCount | The number of records in the ServerCert arrays. |
ServerCertBytes | Returns raw certificate data in DER format. |
ServerCertCAKeyID | A unique identifier (fingerprint) of the CA certificate's private key. |
ServerCertFingerprint | Contains the fingerprint (a hash imprint) of this certificate. |
ServerCertHandle | Allows to get or set a 'handle', a unique identifier of the underlying property object. |
ServerCertIssuer | The common name of the certificate issuer (CA), typically a company name. |
ServerCertIssuerRDN | A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer. |
ServerCertKeyAlgorithm | Specifies the public key algorithm of this certificate. |
ServerCertKeyBits | Returns the length of the public key. |
ServerCertKeyFingerprint | Returns a fingerprint of the public key contained in the certificate. |
ServerCertKeyUsage | Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set. |
ServerCertPublicKeyBytes | Contains the certificate's public key in DER format. |
ServerCertSelfSigned | Indicates whether the certificate is self-signed (root) or signed by an external CA. |
ServerCertSerialNumber | Returns the certificate's serial number. |
ServerCertSigAlgorithm | Indicates the algorithm that was used by the CA to sign this certificate. |
ServerCertSubject | The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. |
ServerCertSubjectKeyID | Contains a unique identifier (fingerprint) of the certificate's private key. |
ServerCertSubjectRDN | A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject). |
ServerCertValidFrom | The time point at which the certificate becomes valid, in UTC. |
ServerCertValidTo | The time point at which the certificate expires, in UTC. |
SocketDNSMode | Selects the DNS resolver to use: the class's (secure) built-in one, or the one provided by the system. |
SocketDNSPort | Specifies the port number to be used for sending queries to the DNS server. |
SocketDNSQueryTimeout | The timeout (in milliseconds) for each DNS query. |
SocketDNSServers | The addresses of DNS servers to use for address resolution, separated by commas or semicolons. |
SocketDNSTotalTimeout | The timeout (in milliseconds) for the whole resolution process. |
SocketIncomingSpeedLimit | The maximum number of bytes to read from the socket, per second. |
SocketLocalAddress | The local network interface to bind the socket to. |
SocketLocalPort | The local port number to bind the socket to. |
SocketOutgoingSpeedLimit | The maximum number of bytes to write to the socket, per second. |
SocketTimeout | The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful. |
SocketUseIPv6 | Enables or disables IP protocol version 6. |
TLSAutoValidateCertificates | Specifies whether server-side TLS certificates should be validated automatically using internal validation rules. |
TLSBaseConfiguration | Selects the base configuration for the TLS settings. |
TLSCiphersuites | A list of ciphersuites separated with commas or semicolons. |
TLSECCurves | Defines the elliptic curves to enable. |
TLSExtensions | Provides access to TLS extensions. |
TLSForceResumeIfDestinationChanges | Whether to force TLS session resumption when the destination address changes. |
TLSPreSharedIdentity | Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated. |
TLSPreSharedKey | Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16. |
TLSPreSharedKeyCiphersuite | Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation. |
TLSRenegotiationAttackPreventionMode | Selects renegotiation attack prevention mechanism. |
TLSRevocationCheck | Specifies the kind(s) of revocation check to perform. |
TLSSSLOptions | Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size. |
TLSTLSMode | Specifies the TLS mode to use. |
TLSUseExtendedMasterSecret | Enables Extended Master Secret Extension, as defined in RFC 7627. |
TLSUseSessionResumption | Enables or disables TLS session resumption capability. |
TLSVersions | Th SSL/TLS versions to enable by default. |
TrustedCertCount | The number of records in the TrustedCert arrays. |
TrustedCertBytes | Returns raw certificate data in DER format. |
TrustedCertHandle | Allows to get or set a 'handle', a unique identifier of the underlying property object. |
Method List
The following is the full list of the methods of the class with short descriptions. Click on the links for further details.
Config | Sets or retrieves a configuration setting. |
DoAction | Performs an additional action. |
GetCertEntryIndex | Returns the index of the list item for the given certificate. |
LoadFromBytes | Loads an OCSP response from a byte array. |
Request | Requests an OCSP response. |
SaveToBytes | Saves a copy of the OCSP response to a byte array. |
SaveToFile | Saves a copy of the OCSP response to a file. |
Validate | Validates the responder's signature over the OCSP response. |
Event List
The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.
CertificateValidate | Fires when the server's TLS certificate has to be validated. |
Error | Information about errors during OCSP (Online Certificate Status Protocol) response management. |
Notification | This event notifies the application about an underlying control flow event. |
TLSEstablished | TBD. |
TLSHandshake | TBD. |
TLSPSK | TBD. |
TLSShutdown | TBD. |
Configuration Settings
The following is a list of configuration settings for the class with short descriptions. Click on the links for further details.
IgnoreSystemTrust | Whether trusted Windows Certificate Stores should be treated as trusted. |
TolerateMinorChainIssues | Whether to tolerate minor chain issues. |
UseMicrosoftCTL | Enables or disables automatic use of Microsoft online certificate trust list. |
UseSystemCertificates | Enables or disables the use of the system certificates. |
CheckKeyIntegrityBeforeUse | Enables or disable private key integrity check before use. |
CookieCaching | Specifies whether a cookie cache should be used for HTTP(S) transports. |
Cookies | Gets or sets local cookies for the class (supported for HTTPClient, RESTClient and SOAPClient only). |
DefDeriveKeyIterations | Specifies the default key derivation algorithm iteration count. |
EnableClientSideSSLFFDHE | Enables or disables finite field DHE key exchange support in TLS clients. |
GlobalCookies | Gets or sets global cookies for all the HTTP transports. |
HttpUserAgent | Specifies the user agent name to be used by all HTTP clients. |
LogDestination | Specifies the debug log destination. |
LogDetails | Specifies the debug log details to dump. |
LogFile | Specifies the debug log filename. |
LogFilters | Specifies the debug log filters. |
LogFlushMode | Specifies the log flush mode. |
LogLevel | Specifies the debug log level. |
LogMaxEventCount | Specifies the maximum number of events to cache before further action is taken. |
LogRotationMode | Specifies the log rotation mode. |
MaxASN1BufferLength | Specifies the maximal allowed length for ASN.1 primitive tag data. |
MaxASN1TreeDepth | Specifies the maximal depth for processed ASN.1 trees. |
OCSPHashAlgorithm | Specifies the hash algorithm to be used to identify certificates in OCSP requests. |
Tag | Allows to store any custom data. |
UseSharedSystemStorages | Specifies whether the validation engine should use a global per-process copy of the system certificate stores. |
UseSystemOAEPAndPSS | Enforces or disables the use of system-driven RSA OAEP and PSS computations. |
UseSystemRandom | Enables or disables the use of the OS PRNG. |
BlockedCertCount Property (OCSPManager Class)
The number of records in the BlockedCert arrays.
Syntax
int GetBlockedCertCount();
int SetBlockedCertCount(int iBlockedCertCount);
Default Value
0
Remarks
This property controls the size of the following arrays:
The array indices start at 0 and end at BlockedCertCount - 1.This property is not available at design time.
Data Type
Integer
BlockedCertBytes Property (OCSPManager Class)
Returns raw certificate data in DER format.
Syntax
QByteArray GetBlockedCertBytes(int iBlockedCertIndex);
Remarks
Returns raw certificate data in DER format.
The BlockedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.
This property is read-only and not available at design time.
Data Type
Byte Array
BlockedCertHandle Property (OCSPManager Class)
Allows to get or set a 'handle', a unique identifier of the underlying property object.
Syntax
qint64 GetBlockedCertHandle(int iBlockedCertIndex);
int SetBlockedCertHandle(int iBlockedCertIndex, qint64 lBlockedCertHandle);
Default Value
0
Remarks
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.
When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
pdfSigner.setSigningCertHandle(certMgr.getCertHandle());
The BlockedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.
This property is not available at design time.
Data Type
Long64
CACertBytes Property (OCSPManager Class)
Returns raw certificate data in DER format.
Syntax
QByteArray GetCACertBytes();
Remarks
Returns raw certificate data in DER format.
This property is read-only and not available at design time.
Data Type
Byte Array
CACertHandle Property (OCSPManager Class)
Allows to get or set a 'handle', a unique identifier of the underlying property object.
Syntax
qint64 GetCACertHandle();
int SetCACertHandle(qint64 lCACertHandle);
Default Value
0
Remarks
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.
When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
pdfSigner.setSigningCertHandle(certMgr.getCertHandle());
This property is not available at design time.
Data Type
Long64
CertBytes Property (OCSPManager Class)
Returns raw certificate data in DER format.
Syntax
QByteArray GetCertBytes();
Remarks
Returns raw certificate data in DER format.
This property is read-only and not available at design time.
Data Type
Byte Array
CertHandle Property (OCSPManager Class)
Allows to get or set a 'handle', a unique identifier of the underlying property object.
Syntax
qint64 GetCertHandle();
int SetCertHandle(qint64 lCertHandle);
Default Value
0
Remarks
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.
When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
pdfSigner.setSigningCertHandle(certMgr.getCertHandle());
This property is not available at design time.
Data Type
Long64
ClientCertCount Property (OCSPManager Class)
The number of records in the ClientCert arrays.
Syntax
int GetClientCertCount();
int SetClientCertCount(int iClientCertCount);
Default Value
0
Remarks
This property controls the size of the following arrays:
The array indices start at 0 and end at ClientCertCount - 1.This property is not available at design time.
Data Type
Integer
ClientCertBytes Property (OCSPManager Class)
Returns raw certificate data in DER format.
Syntax
QByteArray GetClientCertBytes(int iClientCertIndex);
Remarks
Returns raw certificate data in DER format.
The ClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ClientCertCount property.
This property is read-only and not available at design time.
Data Type
Byte Array
ClientCertHandle Property (OCSPManager Class)
Allows to get or set a 'handle', a unique identifier of the underlying property object.
Syntax
qint64 GetClientCertHandle(int iClientCertIndex);
int SetClientCertHandle(int iClientCertIndex, qint64 lClientCertHandle);
Default Value
0
Remarks
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.
When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
pdfSigner.setSigningCertHandle(certMgr.getCertHandle());
The ClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ClientCertCount property.
This property is not available at design time.
Data Type
Long64
ConnInfoAEADCipher Property (OCSPManager Class)
Indicates whether the encryption algorithm used is an AEAD cipher.
Syntax
bool GetConnInfoAEADCipher();
Default Value
false
Remarks
Indicates whether the encryption algorithm used is an AEAD cipher.
This property is read-only and not available at design time.
Data Type
Boolean
ConnInfoChainValidationDetails Property (OCSPManager Class)
The details of a certificate chain validation outcome.
Syntax
int GetConnInfoChainValidationDetails();
Default Value
0
Remarks
The details of a certificate chain validation outcome. They may often suggest what reasons that contributed to the overall validation result.
Returns a bit mask of the following options:
cvrBadData | 0x0001 | One or more certificates in the validation path are malformed |
cvrRevoked | 0x0002 | One or more certificates are revoked |
cvrNotYetValid | 0x0004 | One or more certificates are not yet valid |
cvrExpired | 0x0008 | One or more certificates are expired |
cvrInvalidSignature | 0x0010 | A certificate contains a non-valid digital signature |
cvrUnknownCA | 0x0020 | A CA certificate for one or more certificates has not been found (chain incomplete) |
cvrCAUnauthorized | 0x0040 | One of the CA certificates are not authorized to act as CA |
cvrCRLNotVerified | 0x0080 | One or more CRLs could not be verified |
cvrOCSPNotVerified | 0x0100 | One or more OCSP responses could not be verified |
cvrIdentityMismatch | 0x0200 | The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate |
cvrNoKeyUsage | 0x0400 | A mandatory key usage is not enabled in one of the chain certificates |
cvrBlocked | 0x0800 | One or more certificates are blocked |
cvrFailure | 0x1000 | General validation failure |
cvrChainLoop | 0x2000 | Chain loop: one of the CA certificates recursively signs itself |
cvrWeakAlgorithm | 0x4000 | A weak algorithm is used in one of certificates or revocation elements |
cvrUserEnforced | 0x8000 | The chain was considered invalid following intervention from a user code |
This property is read-only and not available at design time.
Data Type
Integer
ConnInfoChainValidationResult Property (OCSPManager Class)
The outcome of a certificate chain validation routine.
Syntax
int GetConnInfoChainValidationResult();
Possible Values
CVT_VALID(0),
CVT_VALID_BUT_UNTRUSTED(1),
CVT_INVALID(2),
CVT_CANT_BE_ESTABLISHED(3)
Default Value
0
Remarks
The outcome of a certificate chain validation routine.
Available options:
cvtValid | 0 | The chain is valid |
cvtValidButUntrusted | 1 | The chain is valid, but the root certificate is not trusted |
cvtInvalid | 2 | The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature) |
cvtCantBeEstablished | 3 | The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses) |
Use the ValidationLog property to access the detailed validation log.
This property is read-only and not available at design time.
Data Type
Integer
ConnInfoCiphersuite Property (OCSPManager Class)
The cipher suite employed by this connection.
Syntax
QString GetConnInfoCiphersuite();
Default Value
""
Remarks
The cipher suite employed by this connection.
For TLS connections, this property returns the ciphersuite that was/is employed by the connection.
This property is read-only and not available at design time.
Data Type
String
ConnInfoClientAuthenticated Property (OCSPManager Class)
Specifies whether client authentication was performed during this connection.
Syntax
bool GetConnInfoClientAuthenticated();
Default Value
false
Remarks
Specifies whether client authentication was performed during this connection.
This property is read-only and not available at design time.
Data Type
Boolean
ConnInfoClientAuthRequested Property (OCSPManager Class)
Specifies whether client authentication was requested during this connection.
Syntax
bool GetConnInfoClientAuthRequested();
Default Value
false
Remarks
Specifies whether client authentication was requested during this connection.
This property is read-only and not available at design time.
Data Type
Boolean
ConnInfoConnectionEstablished Property (OCSPManager Class)
Indicates whether the connection has been established fully.
Syntax
bool GetConnInfoConnectionEstablished();
Default Value
false
Remarks
Indicates whether the connection has been established fully.
This property is read-only and not available at design time.
Data Type
Boolean
ConnInfoConnectionID Property (OCSPManager Class)
The unique identifier assigned to this connection.
Syntax
QByteArray GetConnInfoConnectionID();
Remarks
The unique identifier assigned to this connection.
This property is read-only and not available at design time.
Data Type
Byte Array
ConnInfoDigestAlgorithm Property (OCSPManager Class)
The digest algorithm used in a TLS-enabled connection.
Syntax
QString GetConnInfoDigestAlgorithm();
Default Value
""
Remarks
The digest algorithm used in a TLS-enabled connection.
This property is read-only and not available at design time.
Data Type
String
ConnInfoEncryptionAlgorithm Property (OCSPManager Class)
The symmetric encryption algorithm used in a TLS-enabled connection.
Syntax
QString GetConnInfoEncryptionAlgorithm();
Default Value
""
Remarks
The symmetric encryption algorithm used in a TLS-enabled connection.
This property is read-only and not available at design time.
Data Type
String
ConnInfoExportable Property (OCSPManager Class)
Indicates whether a TLS connection uses a reduced-strength exportable cipher.
Syntax
bool GetConnInfoExportable();
Default Value
false
Remarks
Indicates whether a TLS connection uses a reduced-strength exportable cipher.
This property is read-only and not available at design time.
Data Type
Boolean
ConnInfoKeyExchangeAlgorithm Property (OCSPManager Class)
The key exchange algorithm used in a TLS-enabled connection.
Syntax
QString GetConnInfoKeyExchangeAlgorithm();
Default Value
""
Remarks
The key exchange algorithm used in a TLS-enabled connection.
This property is read-only and not available at design time.
Data Type
String
ConnInfoKeyExchangeKeyBits Property (OCSPManager Class)
The length of the key exchange key of a TLS-enabled connection.
Syntax
int GetConnInfoKeyExchangeKeyBits();
Default Value
0
Remarks
The length of the key exchange key of a TLS-enabled connection.
This property is read-only and not available at design time.
Data Type
Integer
ConnInfoNamedECCurve Property (OCSPManager Class)
The elliptic curve used in this connection.
Syntax
QString GetConnInfoNamedECCurve();
Default Value
""
Remarks
The elliptic curve used in this connection.
This property is read-only and not available at design time.
Data Type
String
ConnInfoPFSCipher Property (OCSPManager Class)
Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).
Syntax
bool GetConnInfoPFSCipher();
Default Value
false
Remarks
Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).
This property is read-only and not available at design time.
Data Type
Boolean
ConnInfoPreSharedIdentityHint Property (OCSPManager Class)
A hint professed by the server to help the client select the PSK identity to use.
Syntax
QString GetConnInfoPreSharedIdentityHint();
Default Value
""
Remarks
A hint professed by the server to help the client select the PSK identity to use.
This property is read-only and not available at design time.
Data Type
String
ConnInfoPublicKeyBits Property (OCSPManager Class)
The length of the public key.
Syntax
int GetConnInfoPublicKeyBits();
Default Value
0
Remarks
The length of the public key.
This property is read-only and not available at design time.
Data Type
Integer
ConnInfoResumedSession Property (OCSPManager Class)
Indicates whether a TLS-enabled connection was spawned from another TLS connection.
Syntax
bool GetConnInfoResumedSession();
Default Value
false
Remarks
Indicates whether a TLS-enabled connection was spawned from another TLS connection
This property is read-only and not available at design time.
Data Type
Boolean
ConnInfoSecureConnection Property (OCSPManager Class)
Indicates whether TLS or SSL is enabled for this connection.
Syntax
bool GetConnInfoSecureConnection();
Default Value
false
Remarks
Indicates whether TLS or SSL is enabled for this connection.
This property is read-only and not available at design time.
Data Type
Boolean
ConnInfoServerAuthenticated Property (OCSPManager Class)
Indicates whether server authentication was performed during a TLS-enabled connection.
Syntax
bool GetConnInfoServerAuthenticated();
Default Value
false
Remarks
Indicates whether server authentication was performed during a TLS-enabled connection.
This property is read-only and not available at design time.
Data Type
Boolean
ConnInfoSignatureAlgorithm Property (OCSPManager Class)
The signature algorithm used in a TLS handshake.
Syntax
QString GetConnInfoSignatureAlgorithm();
Default Value
""
Remarks
The signature algorithm used in a TLS handshake.
This property is read-only and not available at design time.
Data Type
String
ConnInfoSymmetricBlockSize Property (OCSPManager Class)
The block size of the symmetric algorithm used.
Syntax
int GetConnInfoSymmetricBlockSize();
Default Value
0
Remarks
The block size of the symmetric algorithm used.
This property is read-only and not available at design time.
Data Type
Integer
ConnInfoSymmetricKeyBits Property (OCSPManager Class)
The key length of the symmetric algorithm used.
Syntax
int GetConnInfoSymmetricKeyBits();
Default Value
0
Remarks
The key length of the symmetric algorithm used.
This property is read-only and not available at design time.
Data Type
Integer
ConnInfoTotalBytesReceived Property (OCSPManager Class)
The total number of bytes received over this connection.
Syntax
qint64 GetConnInfoTotalBytesReceived();
Default Value
0
Remarks
The total number of bytes received over this connection.
This property is read-only and not available at design time.
Data Type
Long64
ConnInfoTotalBytesSent Property (OCSPManager Class)
The total number of bytes sent over this connection.
Syntax
qint64 GetConnInfoTotalBytesSent();
Default Value
0
Remarks
The total number of bytes sent over this connection.
This property is read-only and not available at design time.
Data Type
Long64
ConnInfoValidationLog Property (OCSPManager Class)
Contains the server certificate's chain validation log.
Syntax
QString GetConnInfoValidationLog();
Default Value
""
Remarks
Contains the server certificate's chain validation log. This information may be very useful in investigating chain validation failures.
This property is read-only and not available at design time.
Data Type
String
ConnInfoVersion Property (OCSPManager Class)
Indicates the version of SSL/TLS protocol negotiated during this connection.
Syntax
QString GetConnInfoVersion();
Default Value
""
Remarks
Indicates the version of SSL/TLS protocol negotiated during this connection.
This property is read-only and not available at design time.
Data Type
String
EntryCount Property (OCSPManager Class)
The number of records in the Entry arrays.
Syntax
int GetEntryCount();
int SetEntryCount(int iEntryCount);
Default Value
0
Remarks
This property controls the size of the following arrays:
The array indices start at 0 and end at EntryCount - 1.This property is not available at design time.
Data Type
Integer
EntryHandle Property (OCSPManager Class)
Allows to get or set a 'handle', a unique identifier of the underlying property object.
Syntax
qint64 GetEntryHandle(int iEntryIndex);
int SetEntryHandle(int iEntryIndex, qint64 lEntryHandle);
Default Value
0
Remarks
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.
When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
pdfSigner.setSigningCertHandle(certMgr.getCertHandle());
The EntryIndex parameter specifies the index of the item in the array. The size of the array is controlled by the EntryCount property.
This property is not available at design time.
Data Type
Long64
FIPSMode Property (OCSPManager Class)
Reserved.
Syntax
bool GetFIPSMode();
int SetFIPSMode(bool bFIPSMode);
Default Value
false
Remarks
This property is reserved for future use.
Data Type
Boolean
KnownCertCount Property (OCSPManager Class)
The number of records in the KnownCert arrays.
Syntax
int GetKnownCertCount();
int SetKnownCertCount(int iKnownCertCount);
Default Value
0
Remarks
This property controls the size of the following arrays:
The array indices start at 0 and end at KnownCertCount - 1.This property is not available at design time.
Data Type
Integer
KnownCertBytes Property (OCSPManager Class)
Returns raw certificate data in DER format.
Syntax
QByteArray GetKnownCertBytes(int iKnownCertIndex);
Remarks
Returns raw certificate data in DER format.
The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.
This property is read-only and not available at design time.
Data Type
Byte Array
KnownCertHandle Property (OCSPManager Class)
Allows to get or set a 'handle', a unique identifier of the underlying property object.
Syntax
qint64 GetKnownCertHandle(int iKnownCertIndex);
int SetKnownCertHandle(int iKnownCertIndex, qint64 lKnownCertHandle);
Default Value
0
Remarks
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.
When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
pdfSigner.setSigningCertHandle(certMgr.getCertHandle());
The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.
This property is not available at design time.
Data Type
Long64
KnownCRLCount Property (OCSPManager Class)
The number of records in the KnownCRL arrays.
Syntax
int GetKnownCRLCount();
int SetKnownCRLCount(int iKnownCRLCount);
Default Value
0
Remarks
This property controls the size of the following arrays:
The array indices start at 0 and end at KnownCRLCount - 1.This property is not available at design time.
Data Type
Integer
KnownCRLBytes Property (OCSPManager Class)
Returns raw CRL data in DER format.
Syntax
QByteArray GetKnownCRLBytes(int iKnownCRLIndex);
Remarks
Returns raw CRL data in DER format.
The KnownCRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.
This property is read-only and not available at design time.
Data Type
Byte Array
KnownCRLHandle Property (OCSPManager Class)
Allows to get or set a 'handle', a unique identifier of the underlying property object.
Syntax
qint64 GetKnownCRLHandle(int iKnownCRLIndex);
int SetKnownCRLHandle(int iKnownCRLIndex, qint64 lKnownCRLHandle);
Default Value
0
Remarks
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.
When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
pdfSigner.setSigningCertHandle(certMgr.getCertHandle());
The KnownCRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.
This property is not available at design time.
Data Type
Long64
KnownOCSPCount Property (OCSPManager Class)
The number of records in the KnownOCSP arrays.
Syntax
int GetKnownOCSPCount();
int SetKnownOCSPCount(int iKnownOCSPCount);
Default Value
0
Remarks
This property controls the size of the following arrays:
The array indices start at 0 and end at KnownOCSPCount - 1.This property is not available at design time.
Data Type
Integer
KnownOCSPBytes Property (OCSPManager Class)
Buffer containing raw OCSP response data.
Syntax
QByteArray GetKnownOCSPBytes(int iKnownOCSPIndex);
Remarks
Buffer containing raw OCSP response data.
The KnownOCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.
This property is read-only and not available at design time.
Data Type
Byte Array
KnownOCSPHandle Property (OCSPManager Class)
Allows to get or set a 'handle', a unique identifier of the underlying property object.
Syntax
qint64 GetKnownOCSPHandle(int iKnownOCSPIndex);
int SetKnownOCSPHandle(int iKnownOCSPIndex, qint64 lKnownOCSPHandle);
Default Value
0
Remarks
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.
When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
pdfSigner.setSigningCertHandle(certMgr.getCertHandle());
The KnownOCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.
This property is not available at design time.
Data Type
Long64
OCSPResponseBytes Property (OCSPManager Class)
Buffer containing raw OCSP response data.
Syntax
QByteArray GetOCSPResponseBytes();
Remarks
Buffer containing raw OCSP response data.
This property is read-only and not available at design time.
Data Type
Byte Array
OCSPResponseEntryCount Property (OCSPManager Class)
The number of SingleResponse elements contained in this OCSP response.
Syntax
int GetOCSPResponseEntryCount();
Default Value
0
Remarks
The number of SingleResponse elements contained in this OCSP response. Each SingleResponse element corresponds to a certificate status.
This property is read-only and not available at design time.
Data Type
Integer
OCSPResponseHandle Property (OCSPManager Class)
Allows to get or set a 'handle', a unique identifier of the underlying property object.
Syntax
qint64 GetOCSPResponseHandle();
int SetOCSPResponseHandle(qint64 lOCSPResponseHandle);
Default Value
0
Remarks
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.
When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
pdfSigner.setSigningCertHandle(certMgr.getCertHandle());
This property is not available at design time.
Data Type
Long64
OCSPResponseIssuer Property (OCSPManager Class)
Indicates the issuer of this response (a CA or its authorized representative).
Syntax
QString GetOCSPResponseIssuer();
Default Value
""
Remarks
Indicates the issuer of this response (a CA or its authorized representative).
This property is read-only and not available at design time.
Data Type
String
OCSPResponseIssuerRDN Property (OCSPManager Class)
Indicates the RDN of the issuer of this response (a CA or its authorized representative).
Syntax
QString GetOCSPResponseIssuerRDN();
Default Value
""
Remarks
Indicates the RDN of the issuer of this response (a CA or its authorized representative).
This property is read-only and not available at design time.
Data Type
String
OCSPResponseLocation Property (OCSPManager Class)
Location of the OCSP responder.
Syntax
QString GetOCSPResponseLocation();
Default Value
""
Remarks
Location of the OCSP responder.
This property is read-only and not available at design time.
Data Type
String
OCSPResponseProducedAt Property (OCSPManager Class)
Specifies the time when the response was produced, in UTC.
Syntax
QString GetOCSPResponseProducedAt();
Default Value
""
Remarks
Specifies the time when the response was produced, in UTC.
This property is read-only and not available at design time.
Data Type
String
ProxyAddress Property (OCSPManager Class)
The IP address of the proxy server.
Syntax
QString GetProxyAddress();
int SetProxyAddress(QString qsProxyAddress);
Default Value
""
Remarks
The IP address of the proxy server.
Data Type
String
ProxyAuthentication Property (OCSPManager Class)
The authentication type used by the proxy server.
Syntax
int GetProxyAuthentication();
int SetProxyAuthentication(int iProxyAuthentication);
Possible Values
PAT_NO_AUTHENTICATION(0),
PAT_BASIC(1),
PAT_DIGEST(2),
PAT_NTLM(3)
Default Value
0
Remarks
The authentication type used by the proxy server.
patNoAuthentication | 0 |
patBasic | 1 |
patDigest | 2 |
patNTLM | 3 |
Data Type
Integer
ProxyPassword Property (OCSPManager Class)
The password to authenticate to the proxy server.
Syntax
QString GetProxyPassword();
int SetProxyPassword(QString qsProxyPassword);
Default Value
""
Remarks
The password to authenticate to the proxy server.
Data Type
String
ProxyPort Property (OCSPManager Class)
The port on the proxy server to connect to.
Syntax
int GetProxyPort();
int SetProxyPort(int iProxyPort);
Default Value
0
Remarks
The port on the proxy server to connect to.
Data Type
Integer
ProxyProxyType Property (OCSPManager Class)
The type of the proxy server.
Syntax
int GetProxyProxyType();
int SetProxyProxyType(int iProxyProxyType);
Possible Values
CPT_NONE(0),
CPT_SOCKS_4(1),
CPT_SOCKS_5(2),
CPT_WEB_TUNNEL(3),
CPT_HTTP(4)
Default Value
0
Remarks
The type of the proxy server.
The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.
cptNone | 0 |
cptSocks4 | 1 |
cptSocks5 | 2 |
cptWebTunnel | 3 |
cptHTTP | 4 |
Data Type
Integer
ProxyRequestHeaders Property (OCSPManager Class)
Contains HTTP request headers for WebTunnel and HTTP proxy.
Syntax
QString GetProxyRequestHeaders();
int SetProxyRequestHeaders(QString qsProxyRequestHeaders);
Default Value
""
Remarks
Contains HTTP request headers for WebTunnel and HTTP proxy.
Data Type
String
ProxyResponseBody Property (OCSPManager Class)
Contains the HTTP or HTTPS (WebTunnel) proxy response body.
Syntax
QString GetProxyResponseBody();
int SetProxyResponseBody(QString qsProxyResponseBody);
Default Value
""
Remarks
Contains the HTTP or HTTPS (WebTunnel) proxy response body.
Data Type
String
ProxyResponseHeaders Property (OCSPManager Class)
Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.
Syntax
QString GetProxyResponseHeaders();
int SetProxyResponseHeaders(QString qsProxyResponseHeaders);
Default Value
""
Remarks
Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.
Data Type
String
ProxyUseIPv6 Property (OCSPManager Class)
Specifies whether IPv6 should be used when connecting through the proxy.
Syntax
bool GetProxyUseIPv6();
int SetProxyUseIPv6(bool bProxyUseIPv6);
Default Value
false
Remarks
Specifies whether IPv6 should be used when connecting through the proxy.
Data Type
Boolean
ProxyUseProxy Property (OCSPManager Class)
Enables or disables proxy-driven connection.
Syntax
bool GetProxyUseProxy();
int SetProxyUseProxy(bool bProxyUseProxy);
Default Value
false
Remarks
Enables or disables proxy-driven connection.
Data Type
Boolean
ProxyUsername Property (OCSPManager Class)
Specifies the username credential for proxy authentication.
Syntax
QString GetProxyUsername();
int SetProxyUsername(QString qsProxyUsername);
Default Value
""
Remarks
Specifies the username credential for proxy authentication.
Data Type
String
ServerCertCount Property (OCSPManager Class)
The number of records in the ServerCert arrays.
Syntax
int GetServerCertCount();
Default Value
0
Remarks
This property controls the size of the following arrays:
- ServerCertBytes
- ServerCertCAKeyID
- ServerCertFingerprint
- ServerCertHandle
- ServerCertIssuer
- ServerCertIssuerRDN
- ServerCertKeyAlgorithm
- ServerCertKeyBits
- ServerCertKeyFingerprint
- ServerCertKeyUsage
- ServerCertPublicKeyBytes
- ServerCertSelfSigned
- ServerCertSerialNumber
- ServerCertSigAlgorithm
- ServerCertSubject
- ServerCertSubjectKeyID
- ServerCertSubjectRDN
- ServerCertValidFrom
- ServerCertValidTo
This property is read-only and not available at design time.
Data Type
Integer
ServerCertBytes Property (OCSPManager Class)
Returns raw certificate data in DER format.
Syntax
QByteArray GetServerCertBytes(int iServerCertIndex);
Remarks
Returns raw certificate data in DER format.
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
Byte Array
ServerCertCAKeyID Property (OCSPManager Class)
A unique identifier (fingerprint) of the CA certificate's private key.
Syntax
QByteArray GetServerCertCAKeyID(int iServerCertIndex);
Remarks
A unique identifier (fingerprint) of the CA certificate's private key.
Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
Byte Array
ServerCertFingerprint Property (OCSPManager Class)
Contains the fingerprint (a hash imprint) of this certificate.
Syntax
QByteArray GetServerCertFingerprint(int iServerCertIndex);
Remarks
Contains the fingerprint (a hash imprint) of this certificate.
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
Byte Array
ServerCertHandle Property (OCSPManager Class)
Allows to get or set a 'handle', a unique identifier of the underlying property object.
Syntax
qint64 GetServerCertHandle(int iServerCertIndex);
Default Value
0
Remarks
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.
When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
pdfSigner.setSigningCertHandle(certMgr.getCertHandle());
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
Long64
ServerCertIssuer Property (OCSPManager Class)
The common name of the certificate issuer (CA), typically a company name.
Syntax
QString GetServerCertIssuer(int iServerCertIndex);
Default Value
""
Remarks
The common name of the certificate issuer (CA), typically a company name.
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
String
ServerCertIssuerRDN Property (OCSPManager Class)
A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.
Syntax
QString GetServerCertIssuerRDN(int iServerCertIndex);
Default Value
""
Remarks
A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
String
ServerCertKeyAlgorithm Property (OCSPManager Class)
Specifies the public key algorithm of this certificate.
Syntax
QString GetServerCertKeyAlgorithm(int iServerCertIndex);
Default Value
"0"
Remarks
Specifies the public key algorithm of this certificate.
SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION | rsaEncryption | |
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION | md2withRSAEncryption | |
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION | md5withRSAEncryption | |
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION | sha1withRSAEncryption | |
SB_CERT_ALGORITHM_ID_DSA | id-dsa | |
SB_CERT_ALGORITHM_ID_DSA_SHA1 | id-dsa-with-sha1 | |
SB_CERT_ALGORITHM_DH_PUBLIC | dhpublicnumber | |
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION | sha224WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION | sha256WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION | sha384WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION | sha512WithRSAEncryption | |
SB_CERT_ALGORITHM_ID_RSAPSS | id-RSASSA-PSS | |
SB_CERT_ALGORITHM_ID_RSAOAEP | id-RSAES-OAEP | |
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160 | ripemd160withRSA | |
SB_CERT_ALGORITHM_ID_ELGAMAL | elGamal | |
SB_CERT_ALGORITHM_SHA1_ECDSA | ecdsa-with-SHA1 | |
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA | ecdsa-recommended | |
SB_CERT_ALGORITHM_SHA224_ECDSA | ecdsa-with-SHA224 | |
SB_CERT_ALGORITHM_SHA256_ECDSA | ecdsa-with-SHA256 | |
SB_CERT_ALGORITHM_SHA384_ECDSA | ecdsa-with-SHA384 | |
SB_CERT_ALGORITHM_SHA512_ECDSA | ecdsa-with-SHA512 | |
SB_CERT_ALGORITHM_EC | id-ecPublicKey | |
SB_CERT_ALGORITHM_SPECIFIED_ECDSA | ecdsa-specified | |
SB_CERT_ALGORITHM_GOST_R3410_1994 | id-GostR3410-94 | |
SB_CERT_ALGORITHM_GOST_R3410_2001 | id-GostR3410-2001 | |
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994 | id-GostR3411-94-with-GostR3410-94 | |
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001 | id-GostR3411-94-with-GostR3410-2001 | |
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN | ecdsa-plain-SHA1 | |
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN | ecdsa-plain-SHA224 | |
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN | ecdsa-plain-SHA256 | |
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN | ecdsa-plain-SHA384 | |
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN | ecdsa-plain-SHA512 | |
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN | ecdsa-plain-RIPEMD160 | |
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION | whirlpoolWithRSAEncryption | |
SB_CERT_ALGORITHM_ID_DSA_SHA224 | id-dsa-with-sha224 | |
SB_CERT_ALGORITHM_ID_DSA_SHA256 | id-dsa-with-sha256 | |
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-512 | |
SB_CERT_ALGORITHM_SHA3_224_ECDSA | id-ecdsa-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_ECDSA | id-ecdsa-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_ECDSA | id-ecdsa-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_ECDSA | id-ecdsa-with-sha3-512 | |
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-512 | |
SB_CERT_ALGORITHM_ID_DSA_SHA3_224 | id-dsa-with-sha3-224 | |
SB_CERT_ALGORITHM_ID_DSA_SHA3_256 | id-dsa-with-sha3-256 | |
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b512 | |
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA | id-ecdsa-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA | id-ecdsa-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA | id-ecdsa-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA | id-ecdsa-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA | id-ecdsa-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA | id-ecdsa-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA | id-ecdsa-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA | id-ecdsa-with-blake2b512 | |
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b512 | |
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224 | id-dsa-with-blake2s224 | |
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256 | id-dsa-with-blake2s256 | |
SB_CERT_ALGORITHM_EDDSA_ED25519 | id-Ed25519 | |
SB_CERT_ALGORITHM_EDDSA_ED448 | id-Ed448 | |
SB_CERT_ALGORITHM_EDDSA_ED25519_PH | id-Ed25519ph | |
SB_CERT_ALGORITHM_EDDSA_ED448_PH | id-Ed448ph | |
SB_CERT_ALGORITHM_EDDSA | id-EdDSA | |
SB_CERT_ALGORITHM_EDDSA_SIGNATURE | id-EdDSA-sig |
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
String
ServerCertKeyBits Property (OCSPManager Class)
Returns the length of the public key.
Syntax
int GetServerCertKeyBits(int iServerCertIndex);
Default Value
0
Remarks
Returns the length of the public key.
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
Integer
ServerCertKeyFingerprint Property (OCSPManager Class)
Returns a fingerprint of the public key contained in the certificate.
Syntax
QByteArray GetServerCertKeyFingerprint(int iServerCertIndex);
Remarks
Returns a fingerprint of the public key contained in the certificate.
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
Byte Array
ServerCertKeyUsage Property (OCSPManager Class)
Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
Syntax
int GetServerCertKeyUsage(int iServerCertIndex);
Default Value
0
Remarks
Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
This value is a bit mask of the following values:
ckuUnknown | 0x00000 | Unknown key usage |
ckuDigitalSignature | 0x00001 | Digital signature |
ckuNonRepudiation | 0x00002 | Non-repudiation |
ckuKeyEncipherment | 0x00004 | Key encipherment |
ckuDataEncipherment | 0x00008 | Data encipherment |
ckuKeyAgreement | 0x00010 | Key agreement |
ckuKeyCertSign | 0x00020 | Certificate signing |
ckuCRLSign | 0x00040 | Revocation signing |
ckuEncipherOnly | 0x00080 | Encipher only |
ckuDecipherOnly | 0x00100 | Decipher only |
ckuServerAuthentication | 0x00200 | Server authentication |
ckuClientAuthentication | 0x00400 | Client authentication |
ckuCodeSigning | 0x00800 | Code signing |
ckuEmailProtection | 0x01000 | Email protection |
ckuTimeStamping | 0x02000 | Timestamping |
ckuOCSPSigning | 0x04000 | OCSP signing |
ckuSmartCardLogon | 0x08000 | Smartcard logon |
ckuKeyPurposeClientAuth | 0x10000 | Kerberos - client authentication |
ckuKeyPurposeKDC | 0x20000 | Kerberos - KDC |
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
Integer
ServerCertPublicKeyBytes Property (OCSPManager Class)
Contains the certificate's public key in DER format.
Syntax
QByteArray GetServerCertPublicKeyBytes(int iServerCertIndex);
Remarks
Contains the certificate's public key in DER format.
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
Byte Array
ServerCertSelfSigned Property (OCSPManager Class)
Indicates whether the certificate is self-signed (root) or signed by an external CA.
Syntax
bool GetServerCertSelfSigned(int iServerCertIndex);
Default Value
false
Remarks
Indicates whether the certificate is self-signed (root) or signed by an external CA.
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
Boolean
ServerCertSerialNumber Property (OCSPManager Class)
Returns the certificate's serial number.
Syntax
QByteArray GetServerCertSerialNumber(int iServerCertIndex);
Remarks
Returns the certificate's serial number.
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
Byte Array
ServerCertSigAlgorithm Property (OCSPManager Class)
Indicates the algorithm that was used by the CA to sign this certificate.
Syntax
QString GetServerCertSigAlgorithm(int iServerCertIndex);
Default Value
""
Remarks
Indicates the algorithm that was used by the CA to sign this certificate.
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
String
ServerCertSubject Property (OCSPManager Class)
The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
Syntax
QString GetServerCertSubject(int iServerCertIndex);
Default Value
""
Remarks
The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
String
ServerCertSubjectKeyID Property (OCSPManager Class)
Contains a unique identifier (fingerprint) of the certificate's private key.
Syntax
QByteArray GetServerCertSubjectKeyID(int iServerCertIndex);
Remarks
Contains a unique identifier (fingerprint) of the certificate's private key.
Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
Byte Array
ServerCertSubjectRDN Property (OCSPManager Class)
A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).
Syntax
QString GetServerCertSubjectRDN(int iServerCertIndex);
Default Value
""
Remarks
A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
String
ServerCertValidFrom Property (OCSPManager Class)
The time point at which the certificate becomes valid, in UTC.
Syntax
QString GetServerCertValidFrom(int iServerCertIndex);
Default Value
""
Remarks
The time point at which the certificate becomes valid, in UTC.
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
String
ServerCertValidTo Property (OCSPManager Class)
The time point at which the certificate expires, in UTC.
Syntax
QString GetServerCertValidTo(int iServerCertIndex);
Default Value
""
Remarks
The time point at which the certificate expires, in UTC.
The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.
This property is read-only and not available at design time.
Data Type
String
SocketDNSMode Property (OCSPManager Class)
Selects the DNS resolver to use: the class's (secure) built-in one, or the one provided by the system.
Syntax
int GetSocketDNSMode();
int SetSocketDNSMode(int iSocketDNSMode);
Possible Values
DM_AUTO(0),
DM_PLATFORM(1),
DM_OWN(2),
DM_OWN_SECURE(3)
Default Value
0
Remarks
Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.
dmAuto | 0 |
dmPlatform | 1 |
dmOwn | 2 |
dmOwnSecure | 3 |
Data Type
Integer
SocketDNSPort Property (OCSPManager Class)
Specifies the port number to be used for sending queries to the DNS server.
Syntax
int GetSocketDNSPort();
int SetSocketDNSPort(int iSocketDNSPort);
Default Value
0
Remarks
Specifies the port number to be used for sending queries to the DNS server.
Data Type
Integer
SocketDNSQueryTimeout Property (OCSPManager Class)
The timeout (in milliseconds) for each DNS query.
Syntax
int GetSocketDNSQueryTimeout();
int SetSocketDNSQueryTimeout(int iSocketDNSQueryTimeout);
Default Value
0
Remarks
The timeout (in milliseconds) for each DNS query. The value of 0 indicates the infinite timeout.
Data Type
Integer
SocketDNSServers Property (OCSPManager Class)
The addresses of DNS servers to use for address resolution, separated by commas or semicolons.
Syntax
QString GetSocketDNSServers();
int SetSocketDNSServers(QString qsSocketDNSServers);
Default Value
""
Remarks
The addresses of DNS servers to use for address resolution, separated by commas or semicolons.
Data Type
String
SocketDNSTotalTimeout Property (OCSPManager Class)
The timeout (in milliseconds) for the whole resolution process.
Syntax
int GetSocketDNSTotalTimeout();
int SetSocketDNSTotalTimeout(int iSocketDNSTotalTimeout);
Default Value
0
Remarks
The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates the infinite timeout.
Data Type
Integer
SocketIncomingSpeedLimit Property (OCSPManager Class)
The maximum number of bytes to read from the socket, per second.
Syntax
int GetSocketIncomingSpeedLimit();
int SetSocketIncomingSpeedLimit(int iSocketIncomingSpeedLimit);
Default Value
0
Remarks
The maximum number of bytes to read from the socket, per second.
Data Type
Integer
SocketLocalAddress Property (OCSPManager Class)
The local network interface to bind the socket to.
Syntax
QString GetSocketLocalAddress();
int SetSocketLocalAddress(QString qsSocketLocalAddress);
Default Value
""
Remarks
The local network interface to bind the socket to.
Data Type
String
SocketLocalPort Property (OCSPManager Class)
The local port number to bind the socket to.
Syntax
int GetSocketLocalPort();
int SetSocketLocalPort(int iSocketLocalPort);
Default Value
0
Remarks
The local port number to bind the socket to.
Data Type
Integer
SocketOutgoingSpeedLimit Property (OCSPManager Class)
The maximum number of bytes to write to the socket, per second.
Syntax
int GetSocketOutgoingSpeedLimit();
int SetSocketOutgoingSpeedLimit(int iSocketOutgoingSpeedLimit);
Default Value
0
Remarks
The maximum number of bytes to write to the socket, per second.
Data Type
Integer
SocketTimeout Property (OCSPManager Class)
The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.
Syntax
int GetSocketTimeout();
int SetSocketTimeout(int iSocketTimeout);
Default Value
60000
Remarks
The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.
If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).
Data Type
Integer
SocketUseIPv6 Property (OCSPManager Class)
Enables or disables IP protocol version 6.
Syntax
bool GetSocketUseIPv6();
int SetSocketUseIPv6(bool bSocketUseIPv6);
Default Value
false
Remarks
Enables or disables IP protocol version 6.
Data Type
Boolean
TLSAutoValidateCertificates Property (OCSPManager Class)
Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.
Syntax
bool GetTLSAutoValidateCertificates();
int SetTLSAutoValidateCertificates(bool bTLSAutoValidateCertificates);
Default Value
true
Remarks
Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.
Data Type
Boolean
TLSBaseConfiguration Property (OCSPManager Class)
Selects the base configuration for the TLS settings.
Syntax
int GetTLSBaseConfiguration();
int SetTLSBaseConfiguration(int iTLSBaseConfiguration);
Possible Values
STPC_DEFAULT(0),
STPC_COMPATIBLE(1),
STPC_COMPREHENSIVE_INSECURE(2),
STPC_HIGHLY_SECURE(3)
Default Value
0
Remarks
Selects the base configuration for the TLS settings. Several profiles are on offer, tuned up for different purposes, such as high security or higher compatibility.
stpcDefault | 0 | |
stpcCompatible | 1 | |
stpcComprehensiveInsecure | 2 | |
stpcHighlySecure | 3 |
Data Type
Integer
TLSCiphersuites Property (OCSPManager Class)
A list of ciphersuites separated with commas or semicolons.
Syntax
QString GetTLSCiphersuites();
int SetTLSCiphersuites(QString qsTLSCiphersuites);
Default Value
""
Remarks
A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases that allow to blanketly enable or disable all ciphersuites at once.
Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by BaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:
- NULL_NULL_NULL
- RSA_NULL_MD5
- RSA_NULL_SHA
- RSA_RC4_MD5
- RSA_RC4_SHA
- RSA_RC2_MD5
- RSA_IDEA_MD5
- RSA_IDEA_SHA
- RSA_DES_MD5
- RSA_DES_SHA
- RSA_3DES_MD5
- RSA_3DES_SHA
- RSA_AES128_SHA
- RSA_AES256_SHA
- DH_DSS_DES_SHA
- DH_DSS_3DES_SHA
- DH_DSS_AES128_SHA
- DH_DSS_AES256_SHA
- DH_RSA_DES_SHA
- DH_RSA_3DES_SHA
- DH_RSA_AES128_SHA
- DH_RSA_AES256_SHA
- DHE_DSS_DES_SHA
- DHE_DSS_3DES_SHA
- DHE_DSS_AES128_SHA
- DHE_DSS_AES256_SHA
- DHE_RSA_DES_SHA
- DHE_RSA_3DES_SHA
- DHE_RSA_AES128_SHA
- DHE_RSA_AES256_SHA
- DH_ANON_RC4_MD5
- DH_ANON_DES_SHA
- DH_ANON_3DES_SHA
- DH_ANON_AES128_SHA
- DH_ANON_AES256_SHA
- RSA_RC2_MD5_EXPORT
- RSA_RC4_MD5_EXPORT
- RSA_DES_SHA_EXPORT
- DH_DSS_DES_SHA_EXPORT
- DH_RSA_DES_SHA_EXPORT
- DHE_DSS_DES_SHA_EXPORT
- DHE_RSA_DES_SHA_EXPORT
- DH_ANON_RC4_MD5_EXPORT
- DH_ANON_DES_SHA_EXPORT
- RSA_CAMELLIA128_SHA
- DH_DSS_CAMELLIA128_SHA
- DH_RSA_CAMELLIA128_SHA
- DHE_DSS_CAMELLIA128_SHA
- DHE_RSA_CAMELLIA128_SHA
- DH_ANON_CAMELLIA128_SHA
- RSA_CAMELLIA256_SHA
- DH_DSS_CAMELLIA256_SHA
- DH_RSA_CAMELLIA256_SHA
- DHE_DSS_CAMELLIA256_SHA
- DHE_RSA_CAMELLIA256_SHA
- DH_ANON_CAMELLIA256_SHA
- PSK_RC4_SHA
- PSK_3DES_SHA
- PSK_AES128_SHA
- PSK_AES256_SHA
- DHE_PSK_RC4_SHA
- DHE_PSK_3DES_SHA
- DHE_PSK_AES128_SHA
- DHE_PSK_AES256_SHA
- RSA_PSK_RC4_SHA
- RSA_PSK_3DES_SHA
- RSA_PSK_AES128_SHA
- RSA_PSK_AES256_SHA
- RSA_SEED_SHA
- DH_DSS_SEED_SHA
- DH_RSA_SEED_SHA
- DHE_DSS_SEED_SHA
- DHE_RSA_SEED_SHA
- DH_ANON_SEED_SHA
- SRP_SHA_3DES_SHA
- SRP_SHA_RSA_3DES_SHA
- SRP_SHA_DSS_3DES_SHA
- SRP_SHA_AES128_SHA
- SRP_SHA_RSA_AES128_SHA
- SRP_SHA_DSS_AES128_SHA
- SRP_SHA_AES256_SHA
- SRP_SHA_RSA_AES256_SHA
- SRP_SHA_DSS_AES256_SHA
- ECDH_ECDSA_NULL_SHA
- ECDH_ECDSA_RC4_SHA
- ECDH_ECDSA_3DES_SHA
- ECDH_ECDSA_AES128_SHA
- ECDH_ECDSA_AES256_SHA
- ECDHE_ECDSA_NULL_SHA
- ECDHE_ECDSA_RC4_SHA
- ECDHE_ECDSA_3DES_SHA
- ECDHE_ECDSA_AES128_SHA
- ECDHE_ECDSA_AES256_SHA
- ECDH_RSA_NULL_SHA
- ECDH_RSA_RC4_SHA
- ECDH_RSA_3DES_SHA
- ECDH_RSA_AES128_SHA
- ECDH_RSA_AES256_SHA
- ECDHE_RSA_NULL_SHA
- ECDHE_RSA_RC4_SHA
- ECDHE_RSA_3DES_SHA
- ECDHE_RSA_AES128_SHA
- ECDHE_RSA_AES256_SHA
- ECDH_ANON_NULL_SHA
- ECDH_ANON_RC4_SHA
- ECDH_ANON_3DES_SHA
- ECDH_ANON_AES128_SHA
- ECDH_ANON_AES256_SHA
- RSA_NULL_SHA256
- RSA_AES128_SHA256
- RSA_AES256_SHA256
- DH_DSS_AES128_SHA256
- DH_RSA_AES128_SHA256
- DHE_DSS_AES128_SHA256
- DHE_RSA_AES128_SHA256
- DH_DSS_AES256_SHA256
- DH_RSA_AES256_SHA256
- DHE_DSS_AES256_SHA256
- DHE_RSA_AES256_SHA256
- DH_ANON_AES128_SHA256
- DH_ANON_AES256_SHA256
- RSA_AES128_GCM_SHA256
- RSA_AES256_GCM_SHA384
- DHE_RSA_AES128_GCM_SHA256
- DHE_RSA_AES256_GCM_SHA384
- DH_RSA_AES128_GCM_SHA256
- DH_RSA_AES256_GCM_SHA384
- DHE_DSS_AES128_GCM_SHA256
- DHE_DSS_AES256_GCM_SHA384
- DH_DSS_AES128_GCM_SHA256
- DH_DSS_AES256_GCM_SHA384
- DH_ANON_AES128_GCM_SHA256
- DH_ANON_AES256_GCM_SHA384
- ECDHE_ECDSA_AES128_SHA256
- ECDHE_ECDSA_AES256_SHA384
- ECDH_ECDSA_AES128_SHA256
- ECDH_ECDSA_AES256_SHA384
- ECDHE_RSA_AES128_SHA256
- ECDHE_RSA_AES256_SHA384
- ECDH_RSA_AES128_SHA256
- ECDH_RSA_AES256_SHA384
- ECDHE_ECDSA_AES128_GCM_SHA256
- ECDHE_ECDSA_AES256_GCM_SHA384
- ECDH_ECDSA_AES128_GCM_SHA256
- ECDH_ECDSA_AES256_GCM_SHA384
- ECDHE_RSA_AES128_GCM_SHA256
- ECDHE_RSA_AES256_GCM_SHA384
- ECDH_RSA_AES128_GCM_SHA256
- ECDH_RSA_AES256_GCM_SHA384
- PSK_AES128_GCM_SHA256
- PSK_AES256_GCM_SHA384
- DHE_PSK_AES128_GCM_SHA256
- DHE_PSK_AES256_GCM_SHA384
- RSA_PSK_AES128_GCM_SHA256
- RSA_PSK_AES256_GCM_SHA384
- PSK_AES128_SHA256
- PSK_AES256_SHA384
- PSK_NULL_SHA256
- PSK_NULL_SHA384
- DHE_PSK_AES128_SHA256
- DHE_PSK_AES256_SHA384
- DHE_PSK_NULL_SHA256
- DHE_PSK_NULL_SHA384
- RSA_PSK_AES128_SHA256
- RSA_PSK_AES256_SHA384
- RSA_PSK_NULL_SHA256
- RSA_PSK_NULL_SHA384
- RSA_CAMELLIA128_SHA256
- DH_DSS_CAMELLIA128_SHA256
- DH_RSA_CAMELLIA128_SHA256
- DHE_DSS_CAMELLIA128_SHA256
- DHE_RSA_CAMELLIA128_SHA256
- DH_ANON_CAMELLIA128_SHA256
- RSA_CAMELLIA256_SHA256
- DH_DSS_CAMELLIA256_SHA256
- DH_RSA_CAMELLIA256_SHA256
- DHE_DSS_CAMELLIA256_SHA256
- DHE_RSA_CAMELLIA256_SHA256
- DH_ANON_CAMELLIA256_SHA256
- ECDHE_ECDSA_CAMELLIA128_SHA256
- ECDHE_ECDSA_CAMELLIA256_SHA384
- ECDH_ECDSA_CAMELLIA128_SHA256
- ECDH_ECDSA_CAMELLIA256_SHA384
- ECDHE_RSA_CAMELLIA128_SHA256
- ECDHE_RSA_CAMELLIA256_SHA384
- ECDH_RSA_CAMELLIA128_SHA256
- ECDH_RSA_CAMELLIA256_SHA384
- RSA_CAMELLIA128_GCM_SHA256
- RSA_CAMELLIA256_GCM_SHA384
- DHE_RSA_CAMELLIA128_GCM_SHA256
- DHE_RSA_CAMELLIA256_GCM_SHA384
- DH_RSA_CAMELLIA128_GCM_SHA256
- DH_RSA_CAMELLIA256_GCM_SHA384
- DHE_DSS_CAMELLIA128_GCM_SHA256
- DHE_DSS_CAMELLIA256_GCM_SHA384
- DH_DSS_CAMELLIA128_GCM_SHA256
- DH_DSS_CAMELLIA256_GCM_SHA384
- DH_anon_CAMELLIA128_GCM_SHA256
- DH_anon_CAMELLIA256_GCM_SHA384
- ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
- ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
- ECDH_ECDSA_CAMELLIA128_GCM_SHA256
- ECDH_ECDSA_CAMELLIA256_GCM_SHA384
- ECDHE_RSA_CAMELLIA128_GCM_SHA256
- ECDHE_RSA_CAMELLIA256_GCM_SHA384
- ECDH_RSA_CAMELLIA128_GCM_SHA256
- ECDH_RSA_CAMELLIA256_GCM_SHA384
- PSK_CAMELLIA128_GCM_SHA256
- PSK_CAMELLIA256_GCM_SHA384
- DHE_PSK_CAMELLIA128_GCM_SHA256
- DHE_PSK_CAMELLIA256_GCM_SHA384
- RSA_PSK_CAMELLIA128_GCM_SHA256
- RSA_PSK_CAMELLIA256_GCM_SHA384
- PSK_CAMELLIA128_SHA256
- PSK_CAMELLIA256_SHA384
- DHE_PSK_CAMELLIA128_SHA256
- DHE_PSK_CAMELLIA256_SHA384
- RSA_PSK_CAMELLIA128_SHA256
- RSA_PSK_CAMELLIA256_SHA384
- ECDHE_PSK_CAMELLIA128_SHA256
- ECDHE_PSK_CAMELLIA256_SHA384
- ECDHE_PSK_RC4_SHA
- ECDHE_PSK_3DES_SHA
- ECDHE_PSK_AES128_SHA
- ECDHE_PSK_AES256_SHA
- ECDHE_PSK_AES128_SHA256
- ECDHE_PSK_AES256_SHA384
- ECDHE_PSK_NULL_SHA
- ECDHE_PSK_NULL_SHA256
- ECDHE_PSK_NULL_SHA384
- ECDHE_RSA_CHACHA20_POLY1305_SHA256
- ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
- DHE_RSA_CHACHA20_POLY1305_SHA256
- PSK_CHACHA20_POLY1305_SHA256
- ECDHE_PSK_CHACHA20_POLY1305_SHA256
- DHE_PSK_CHACHA20_POLY1305_SHA256
- RSA_PSK_CHACHA20_POLY1305_SHA256
- AES128_GCM_SHA256
- AES256_GCM_SHA384
- CHACHA20_POLY1305_SHA256
- AES128_CCM_SHA256
- AES128_CCM8_SHA256
Data Type
String
TLSECCurves Property (OCSPManager Class)
Defines the elliptic curves to enable.
Syntax
QString GetTLSECCurves();
int SetTLSECCurves(QString qsTLSECCurves);
Default Value
""
Remarks
Defines the elliptic curves to enable.
Data Type
String
TLSExtensions Property (OCSPManager Class)
Provides access to TLS extensions.
Syntax
QString GetTLSExtensions();
int SetTLSExtensions(QString qsTLSExtensions);
Default Value
""
Remarks
Provides access to TLS extensions.
Data Type
String
TLSForceResumeIfDestinationChanges Property (OCSPManager Class)
Whether to force TLS session resumption when the destination address changes.
Syntax
bool GetTLSForceResumeIfDestinationChanges();
int SetTLSForceResumeIfDestinationChanges(bool bTLSForceResumeIfDestinationChanges);
Default Value
false
Remarks
Whether to force TLS session resumption when the destination address changes.
Data Type
Boolean
TLSPreSharedIdentity Property (OCSPManager Class)
Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
Syntax
QString GetTLSPreSharedIdentity();
int SetTLSPreSharedIdentity(QString qsTLSPreSharedIdentity);
Default Value
""
Remarks
Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
This property is not available at design time.
Data Type
String
TLSPreSharedKey Property (OCSPManager Class)
Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.
Syntax
QString GetTLSPreSharedKey();
int SetTLSPreSharedKey(QString qsTLSPreSharedKey);
Default Value
""
Remarks
Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.
This property is not available at design time.
Data Type
String
TLSPreSharedKeyCiphersuite Property (OCSPManager Class)
Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.
Syntax
QString GetTLSPreSharedKeyCiphersuite();
int SetTLSPreSharedKeyCiphersuite(QString qsTLSPreSharedKeyCiphersuite);
Default Value
""
Remarks
Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.
Data Type
String
TLSRenegotiationAttackPreventionMode Property (OCSPManager Class)
Selects renegotiation attack prevention mechanism.
Syntax
int GetTLSRenegotiationAttackPreventionMode();
int SetTLSRenegotiationAttackPreventionMode(int iTLSRenegotiationAttackPreventionMode);
Possible Values
CRAPM_COMPATIBLE(0),
CRAPM_STRICT(1),
CRAPM_AUTO(2)
Default Value
0
Remarks
Selects renegotiation attack prevention mechanism.
The following options are available:
crapmCompatible | 0 | TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled). |
crapmStrict | 1 | Renegotiation attack prevention is enabled and enforced. |
crapmAuto | 2 | Automatically choose whether to enable or disable renegotiation attack prevention. |
Data Type
Integer
TLSRevocationCheck Property (OCSPManager Class)
Specifies the kind(s) of revocation check to perform.
Syntax
int GetTLSRevocationCheck();
int SetTLSRevocationCheck(int iTLSRevocationCheck);
Possible Values
CRC_NONE(0),
CRC_AUTO(1),
CRC_ALL_CRL(2),
CRC_ALL_OCSP(3),
CRC_ALL_CRLAND_OCSP(4),
CRC_ANY_CRL(5),
CRC_ANY_OCSP(6),
CRC_ANY_CRLOR_OCSP(7),
CRC_ANY_OCSPOR_CRL(8)
Default Value
1
Remarks
Specifies the kind(s) of revocation check to perform.
Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.
crcNone (0) | No revocation checking |
crcAuto (1) | Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future. |
crcAllCRL (2) | Check all provided CRL endpoints for all chain certificates. |
crcAllOCSP (3) | Check all provided OCSP endpoints for all chain certificates. |
crcAllCRLAndOCSP (4) | Check all CRL and OCSP endpoints for all chain certificates. |
crcAnyCRL (5) | At least one CRL check for every certificate in the chain must succeed. |
crcAnyOCSP (6) | At least one OCSP check for every certificate in the chain must succeed. |
crcAnyCRLOrOCSP (7) | At least one CRL or OCSP check for every certificate in the chain must succeed. CRL endpoints are checked first. |
crcAnyOCSPOrCRL (8) | At least one CRL or OCSP check for every certificate in the chain must succeed. OCSP endpoints are checked first. |
This setting controls the way the revocation checks are performed. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.
There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).
This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to faster OCSP route and only demand one source to succeed) is a good choice for most of typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.
This property is not available at design time.
Data Type
Integer
TLSSSLOptions Property (OCSPManager Class)
Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.
Syntax
int GetTLSSSLOptions();
int SetTLSSSLOptions(int iTLSSSLOptions);
Default Value
16
Remarks
Various SSL (TLS) protocol options, set of
cssloExpectShutdownMessage | 0x001 | Wait for the close-notify message when shutting down the connection |
cssloOpenSSLDTLSWorkaround | 0x002 | (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions |
cssloDisableKexLengthAlignment | 0x004 | Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it. |
cssloForceUseOfClientCertHashAlg | 0x008 | Enforce use of client certificate hash algorithm. It is unlikely that you will ever need to adjust it. |
cssloAutoAddServerNameExtension | 0x010 | Automatically add server name extension when known |
cssloAcceptTrustedSRPPrimesOnly | 0x020 | Accept trusted SRP primes only |
cssloDisableSignatureAlgorithmsExtension | 0x040 | Disable (not send) signature algorithms extension. It is unlikely that you will ever need to adjust it. |
cssloIntolerateHigherProtocolVersions | 0x080 | (server option) Do not allow fallback from TLS versions higher than currently enabled |
cssloStickToPrefCertHashAlg | 0x100 | Stick to preferred certificate hash algorithms |
cssloNoImplicitTLS12Fallback | 0x200 | Disable implicit TLS 1.3 to 1.2 fallbacks |
cssloUseHandshakeBatches | 0x400 | Send handshake message as large batches rather than individually |
Data Type
Integer
TLSTLSMode Property (OCSPManager Class)
Specifies the TLS mode to use.
Syntax
int GetTLSTLSMode();
int SetTLSTLSMode(int iTLSTLSMode);
Possible Values
SM_DEFAULT(0),
SM_NO_TLS(1),
SM_EXPLICIT_TLS(2),
SM_IMPLICIT_TLS(3),
SM_MIXED_TLS(4)
Default Value
0
Remarks
Specifies the TLS mode to use.
smDefault | 0 | |
smNoTLS | 1 | Do not use TLS |
smExplicitTLS | 2 | Connect to the server without any encryption and then request an SSL session. |
smImplicitTLS | 3 | Connect to the specified port, and establish the SSL session at once. |
smMixedTLS | 4 | Connect to the specified port, and establish the SSL session at once, allow plain data. |
Data Type
Integer
TLSUseExtendedMasterSecret Property (OCSPManager Class)
Enables Extended Master Secret Extension, as defined in RFC 7627.
Syntax
bool GetTLSUseExtendedMasterSecret();
int SetTLSUseExtendedMasterSecret(bool bTLSUseExtendedMasterSecret);
Default Value
false
Remarks
Enables Extended Master Secret Extension, as defined in RFC 7627.
Data Type
Boolean
TLSUseSessionResumption Property (OCSPManager Class)
Enables or disables TLS session resumption capability.
Syntax
bool GetTLSUseSessionResumption();
int SetTLSUseSessionResumption(bool bTLSUseSessionResumption);
Default Value
false
Remarks
Enables or disables TLS session resumption capability.
Data Type
Boolean
TLSVersions Property (OCSPManager Class)
Th SSL/TLS versions to enable by default.
Syntax
int GetTLSVersions();
int SetTLSVersions(int iTLSVersions);
Default Value
16
Remarks
Th SSL/TLS versions to enable by default.
csbSSL2 | 0x01 | SSL 2 |
csbSSL3 | 0x02 | SSL 3 |
csbTLS1 | 0x04 | TLS 1.0 |
csbTLS11 | 0x08 | TLS 1.1 |
csbTLS12 | 0x10 | TLS 1.2 |
csbTLS13 | 0x20 | TLS 1.3 |
Data Type
Integer
TrustedCertCount Property (OCSPManager Class)
The number of records in the TrustedCert arrays.
Syntax
int GetTrustedCertCount();
int SetTrustedCertCount(int iTrustedCertCount);
Default Value
0
Remarks
This property controls the size of the following arrays:
The array indices start at 0 and end at TrustedCertCount - 1.This property is not available at design time.
Data Type
Integer
TrustedCertBytes Property (OCSPManager Class)
Returns raw certificate data in DER format.
Syntax
QByteArray GetTrustedCertBytes(int iTrustedCertIndex);
Remarks
Returns raw certificate data in DER format.
The TrustedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.
This property is read-only and not available at design time.
Data Type
Byte Array
TrustedCertHandle Property (OCSPManager Class)
Allows to get or set a 'handle', a unique identifier of the underlying property object.
Syntax
qint64 GetTrustedCertHandle(int iTrustedCertIndex);
int SetTrustedCertHandle(int iTrustedCertIndex, qint64 lTrustedCertHandle);
Default Value
0
Remarks
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.
When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
pdfSigner.setSigningCertHandle(certMgr.getCertHandle());
The TrustedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.
This property is not available at design time.
Data Type
Long64
Config Method (OCSPManager Class)
Sets or retrieves a configuration setting.
Syntax
QString Config(const QString& qsConfigurationString);
Remarks
Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.
These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.
To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).
To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.
Error Handling
This method returns a String value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.
DoAction Method (OCSPManager Class)
Performs an additional action.
Syntax
QString DoAction(const QString& qsActionID, const QString& qsActionParams);
Remarks
DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.
The unique identifier of the action is provided in ActionID parameter. ActionParams contains a list of parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....
Error Handling
This method returns a String value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.
GetCertEntryIndex Method (OCSPManager Class)
Returns the index of the list item for the given certificate.
Syntax
int GetCertEntryIndex(QByteArray qbaSerialNumber);
Remarks
Use this method to get the entry index given certificate's SerialNumber.
Error Handling
This method returns an Integer value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.
LoadFromBytes Method (OCSPManager Class)
Loads an OCSP response from a byte array.
Syntax
int LoadFromBytes(QByteArray qbaRespBytes);
Remarks
Use this method to load an OCSP response from a byte array
Error Handling
This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)
Request Method (OCSPManager Class)
Requests an OCSP response.
Syntax
bool Request();
Remarks
Use this method to request an OCSP response for a certificate. Assign the certificate to Certificate, and its CA certificate (required) to CACertificate property.
The method returns true if the CA provides OCSP service for this certificate, and false otherwise. If OCSP service is provided, and the request succeeds, the downloaded OCSP response will be available in OCSPResponse. If OCSP service is provided, but the request fails (e.g. due to a network issue), an exception will be thrown.
Error Handling
This method returns a Boolean value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.
SaveToBytes Method (OCSPManager Class)
Saves a copy of the OCSP response to a byte array.
Syntax
QByteArray SaveToBytes();
Remarks
Use this method to save a copy of the attached OCSP response to a byte array.
Error Handling
This method returns a Byte Array value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.
SaveToFile Method (OCSPManager Class)
Saves a copy of the OCSP response to a file.
Syntax
int SaveToFile(const QString& qsFilename);
Remarks
Use this method to save a copy of the attached OCSP response to a file.
Error Handling
This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)
Validate Method (OCSPManager Class)
Validates the responder's signature over the OCSP response.
Syntax
int Validate();
Remarks
Call this method to validate the OCSP responder's signature over the attached OCSP response.
svtValid | 0 | The signature is valid |
svtUnknown | 1 | Signature validity is unknown |
svtCorrupted | 2 | The signature is corrupted |
svtSignerNotFound | 3 | Failed to acquire the signing certificate. The signature cannot be validated. |
svtFailure | 4 | General failure |
Error Handling
This method returns an Integer value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.
CertificateValidate Event (OCSPManager Class)
Fires when the server's TLS certificate has to be validated.
Syntax
class OCSPManagerCertificateValidateEventParams { public: const QString &Address(); bool Accept(); void SetAccept(bool bAccept); int EventRetVal(); void SetEventRetVal(int iRetVal); };
// To handle, connect one or more slots to this signal. void CertificateValidate(OCSPManagerCertificateValidateEventParams *e);
// Or, subclass OCSPManager and override this emitter function. virtual int FireCertificateValidate(OCSPManagerCertificateValidateEventParams *e) {...}
Remarks
The class fires this event upon receiving the server's certificate during TLS handshake. The subscriber to this event has to validate the certificate and return its status back to the class using the Accept parameter.
The Address parameter indicates the address of the server the connection is being established to.
This event is fired independently of the AutoValidateCertificates setting. If this setting is false, the event handler (and your code) is responsible for validating the certificate chain and returning the result back to the component through the Accept parameter. Note that setting AutoValidateCertificates to false and not performing any validation inside the handler of this event creates a serious security vulnerability, which can lead to grave consequences.
The exact validation method to use depends on your circumstances, and may range from comparing the certificate to its legit and trusted copy (sometimes called certificate pinning), to fully-fledged chain validation. CertificateValidator component is one of the options to build your chain validation on.
If AutoValidateCertificates is true, the chain has already been validated internally by the component by the time this event fires, and the value of Accept reflects the outcome of that check. You can perform your own, additional validation even when using AutoValidateCertificates mode, and adjust Accept if needed.
Error Event (OCSPManager Class)
Information about errors during OCSP (Online Certificate Status Protocol) response management.
Syntax
class OCSPManagerErrorEventParams { public: int ErrorCode(); const QString &Description(); int EventRetVal(); void SetEventRetVal(int iRetVal); };
// To handle, connect one or more slots to this signal. void Error(OCSPManagerErrorEventParams *e);
// Or, subclass OCSPManager and override this emitter function. virtual int FireError(OCSPManagerErrorEventParams *e) {...}
Remarks
The event is fired in case of exceptional conditions during OCSP processing.
ErrorCode contains the error code and Description contains a textual description of the error. For the list of error codes please refer to OCSP.
Notification Event (OCSPManager Class)
This event notifies the application about an underlying control flow event.
Syntax
class OCSPManagerNotificationEventParams { public: const QString &EventID(); const QString &EventParam(); int EventRetVal(); void SetEventRetVal(int iRetVal); };
// To handle, connect one or more slots to this signal. void Notification(OCSPManagerNotificationEventParams *e);
// Or, subclass OCSPManager and override this emitter function. virtual int FireNotification(OCSPManagerNotificationEventParams *e) {...}
Remarks
The class fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.
The unique identifier of the event is provided in EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.
TLSEstablished Event (OCSPManager Class)
TBD.
Syntax
class OCSPManagerTLSEstablishedEventParams { public: int EventRetVal(); void SetEventRetVal(int iRetVal); };
// To handle, connect one or more slots to this signal. void TLSEstablished(OCSPManagerTLSEstablishedEventParams *e);
// Or, subclass OCSPManager and override this emitter function. virtual int FireTLSEstablished(OCSPManagerTLSEstablishedEventParams *e) {...}
Remarks
TBD
TLSHandshake Event (OCSPManager Class)
TBD.
Syntax
class OCSPManagerTLSHandshakeEventParams { public: int EventRetVal(); void SetEventRetVal(int iRetVal); };
// To handle, connect one or more slots to this signal. void TLSHandshake(OCSPManagerTLSHandshakeEventParams *e);
// Or, subclass OCSPManager and override this emitter function. virtual int FireTLSHandshake(OCSPManagerTLSHandshakeEventParams *e) {...}
Remarks
TBD
TLSPSK Event (OCSPManager Class)
TBD.
Syntax
class OCSPManagerTLSPSKEventParams { public: const QString &Hint(); int EventRetVal(); void SetEventRetVal(int iRetVal); };
// To handle, connect one or more slots to this signal. void TLSPSK(OCSPManagerTLSPSKEventParams *e);
// Or, subclass OCSPManager and override this emitter function. virtual int FireTLSPSK(OCSPManagerTLSPSKEventParams *e) {...}
Remarks
TBD
TLSShutdown Event (OCSPManager Class)
TBD.
Syntax
class OCSPManagerTLSShutdownEventParams { public: int EventRetVal(); void SetEventRetVal(int iRetVal); };
// To handle, connect one or more slots to this signal. void TLSShutdown(OCSPManagerTLSShutdownEventParams *e);
// Or, subclass OCSPManager and override this emitter function. virtual int FireTLSShutdown(OCSPManagerTLSShutdownEventParams *e) {...}
Remarks
TBD
Configuration Settings (OCSPManager Class)
The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.OCSPManager Configuration Settings | ||||||||||||||||||||||||||||||
IgnoreSystemTrust:
Whether trusted Windows Certificate Stores should be treated as trusted.Specifies whether, during chain validation, the component should respect
the trust to CA certificates as configured in the operating system.
In Windows this effectively defines whether the component should trust the
certificates residing in the Trusted Root Certification Authorities store.
If IgnoreSystemTrust is True, certificates residing in the trusted root store are treated as if they are known, rather than trusted. Only certificates provided via other means (such as TrustedCertificates property) are considered trusted. |
||||||||||||||||||||||||||||||
TolerateMinorChainIssues: Whether to tolerate minor chain issues.TBD | ||||||||||||||||||||||||||||||
UseMicrosoftCTL: Enables or disables automatic use of Microsoft online certificate trust list.Enable this property to make the chain validation module automatically look up missing CA certificates in the public Windows Update repository. | ||||||||||||||||||||||||||||||
UseSystemCertificates: Enables or disables the use of the system certificates.Use this property to tell chain validation module automatically look up missing CA certificates in the system certificates. In many cases it is beneficial to switch this property on, as the operating system certificate configuration provides a representative trust framework. | ||||||||||||||||||||||||||||||
Base Configuration Settings | ||||||||||||||||||||||||||||||
CheckKeyIntegrityBeforeUse:
Enables or disable private key integrity check before use.This global property enables or disables private key material check before each signing operation. This slows down performance a bit,
but prevents a selection of attacks on RSA keys where keys with unknown origins are used.
You can switch this property off to improve performance if your project only uses known, good private keys. |
||||||||||||||||||||||||||||||
CookieCaching:
Specifies whether a cookie cache should be used for HTTP(S) transports.Set this property to enable or disable cookies caching for the class.
Supported values are:
|
||||||||||||||||||||||||||||||
Cookies: Gets or sets local cookies for the class (supported for HTTPClient, RESTClient and SOAPClient only).Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions. | ||||||||||||||||||||||||||||||
DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided. | ||||||||||||||||||||||||||||||
EnableClientSideSSLFFDHE:
Enables or disables finite field DHE key exchange support in TLS clients.This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower
algorithm if compared to EC DHE; enabling it may result in slower connections.
This setting only applies to sessions negotiated with TLS version 1.3. |
||||||||||||||||||||||||||||||
GlobalCookies: Gets or sets global cookies for all the HTTP transports.Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global". | ||||||||||||||||||||||||||||||
HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes. | ||||||||||||||||||||||||||||||
LogDestination:
Specifies the debug log destination.Contains a comma-separated list of values that specifies where debug log should be dumped.
Supported values are:
|
||||||||||||||||||||||||||||||
LogDetails:
Specifies the debug log details to dump.Contains a comma-separated list of values that specifies which debug log details to dump.
Supported values are:
|
||||||||||||||||||||||||||||||
LogFile: Specifies the debug log filename.Use this property to provide a path to the log file. | ||||||||||||||||||||||||||||||
LogFilters:
Specifies the debug log filters.Contains a comma-separated list of value pairs ("name:value") that describe filters.
Supported filter names are:
|
||||||||||||||||||||||||||||||
LogFlushMode:
Specifies the log flush mode.Use this property to set the log flush mode. The following values are defined:
|
||||||||||||||||||||||||||||||
LogLevel:
Specifies the debug log level.Use this property to provide the desired debug log level.
Supported values are:
|
||||||||||||||||||||||||||||||
LogMaxEventCount:
Specifies the maximum number of events to cache before further action is taken.Use this property to specify the log event number threshold. This threshold may have different effects,
depending on the rotation setting and/or the flush mode.
The default value of this setting is 100. |
||||||||||||||||||||||||||||||
LogRotationMode:
Specifies the log rotation mode.Use this property to set the log rotation mode. The following values are defined:
|
||||||||||||||||||||||||||||||
MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks. | ||||||||||||||||||||||||||||||
MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks. | ||||||||||||||||||||||||||||||
OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful. | ||||||||||||||||||||||||||||||
Tag: Allows to store any custom data.Use this config property to store any custom data. | ||||||||||||||||||||||||||||||
UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.Set this global property to false to make each validation run use its own copy of system certificate stores. | ||||||||||||||||||||||||||||||
UseSystemOAEPAndPSS:
Enforces or disables the use of system-driven RSA OAEP and PSS computations.This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable.
If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations
using its own OAEP/PSS implementation.
This setting only applies to certificates originating from a Windows system store. |
||||||||||||||||||||||||||||||
UseSystemRandom: Enables or disables the use of the OS PRNG.Use this global property to enable or disable the use of operating system-driven pseudorandom number generation. |
Trappable Errors (OCSPManager Class)
OCSPManager Errors
1048577 Invalid parameter value (SB_ERROR_INVALID_PARAMETER) | |
1048578 Class is configured incorrectly (SB_ERROR_INVALID_SETUP) | |
1048579 Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE) | |
1048580 Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE) | |
1048581 Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY) | |
1048581 Cancelled by the user (SB_ERROR_CANCELLED_BY_USER) |