OfficeSigner Class

Properties Methods Events Configuration Settings Errors

The OfficeSigner class signs Office documents.

Syntax

OfficeSigner

Remarks

OfficeSigner provides digital signing capabilities of Office documents, and provides support for extended facilities, such as timestamps and advanced (XAdES) signatures.

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.


BlockedCertCount	The number of records in the BlockedCert arrays.
BlockedCertBytes	Returns raw certificate data in DER format.
BlockedCertHandle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
ChainValidationDetails	The details of a certificate chain validation outcome.
ChainValidationResult	The general outcome of a certificate chain validation routine. Use ChainValidationDetails to get information about the reasons that contributed to the validation result.
ClaimedSigningTime	The signing time from the signer's computer.
CurrentCACertBytes	Returns raw certificate data in DER format.
CurrentCACertCA	Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension).
CurrentCACertCAKeyID	A unique identifier (fingerprint) of the CA certificate's private key.
CurrentCACertCRLDistributionPoints	Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.
CurrentCACertCurve	Specifies the elliptic curve of the EC public key.
CurrentCACertFingerprint	Contains the fingerprint (a hash imprint) of this certificate.
CurrentCACertFriendlyName	Contains an associated alias (friendly name) of the certificate.
CurrentCACertHandle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
CurrentCACertHashAlgorithm	Specifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .
CurrentCACertIssuer	The common name of the certificate issuer (CA), typically a company name.
CurrentCACertIssuerRDN	A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.
CurrentCACertKeyAlgorithm	Specifies the public key algorithm of this certificate.
CurrentCACertKeyBits	Returns the length of the public key.
CurrentCACertKeyFingerprint	Returns a fingerprint of the public key contained in the certificate.
CurrentCACertKeyUsage	Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
CurrentCACertKeyValid	Returns True if the certificate's key is cryptographically valid, and False otherwise.
CurrentCACertOCSPLocations	Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.
CurrentCACertOCSPNoCheck	TBD.
CurrentCACertOrigin	Returns the origin of this certificate.
CurrentCACertPolicyIDs	Contains identifiers (OIDs) of the applicable certificate policies.
CurrentCACertPrivateKeyBytes	Contains the certificate's private key.
CurrentCACertPrivateKeyExists	Indicates whether the certificate has an associated private key.
CurrentCACertPrivateKeyExtractable	Indicates whether the private key is extractable.
CurrentCACertPublicKeyBytes	Contains the certificate's public key in DER format.
CurrentCACertQualifiedStatements	TBD.
CurrentCACertSelfSigned	Indicates whether the certificate is self-signed (root) or signed by an external CA.
CurrentCACertSerialNumber	Returns the certificate's serial number.
CurrentCACertSigAlgorithm	Indicates the algorithm that was used by the CA to sign this certificate.
CurrentCACertSubject	The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
CurrentCACertSubjectAlternativeName	TBD.
CurrentCACertSubjectKeyID	Contains a unique identifier (fingerprint) of the certificate's private key.
CurrentCACertSubjectRDN	A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).
CurrentCACertValidFrom	The time point at which the certificate becomes valid, in UTC.
CurrentCACertValidTo	The time point at which the certificate expires, in UTC.
CurrentCertBytes	Returns raw certificate data in DER format.
CurrentCertCA	Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension).
CurrentCertCAKeyID	A unique identifier (fingerprint) of the CA certificate's private key.
CurrentCertCRLDistributionPoints	Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.
CurrentCertCurve	Specifies the elliptic curve of the EC public key.
CurrentCertFingerprint	Contains the fingerprint (a hash imprint) of this certificate.
CurrentCertFriendlyName	Contains an associated alias (friendly name) of the certificate.
CurrentCertHandle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
CurrentCertHashAlgorithm	Specifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .
CurrentCertIssuer	The common name of the certificate issuer (CA), typically a company name.
CurrentCertIssuerRDN	A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.
CurrentCertKeyAlgorithm	Specifies the public key algorithm of this certificate.
CurrentCertKeyBits	Returns the length of the public key.
CurrentCertKeyFingerprint	Returns a fingerprint of the public key contained in the certificate.
CurrentCertKeyUsage	Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
CurrentCertKeyValid	Returns True if the certificate's key is cryptographically valid, and False otherwise.
CurrentCertOCSPLocations	Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.
CurrentCertOCSPNoCheck	TBD.
CurrentCertOrigin	Returns the origin of this certificate.
CurrentCertPolicyIDs	Contains identifiers (OIDs) of the applicable certificate policies.
CurrentCertPrivateKeyBytes	Contains the certificate's private key.
CurrentCertPrivateKeyExists	Indicates whether the certificate has an associated private key.
CurrentCertPrivateKeyExtractable	Indicates whether the private key is extractable.
CurrentCertPublicKeyBytes	Contains the certificate's public key in DER format.
CurrentCertQualifiedStatements	TBD.
CurrentCertSelfSigned	Indicates whether the certificate is self-signed (root) or signed by an external CA.
CurrentCertSerialNumber	Returns the certificate's serial number.
CurrentCertSigAlgorithm	Indicates the algorithm that was used by the CA to sign this certificate.
CurrentCertSubject	The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
CurrentCertSubjectAlternativeName	TBD.
CurrentCertSubjectKeyID	Contains a unique identifier (fingerprint) of the certificate's private key.
CurrentCertSubjectRDN	A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).
CurrentCertValidFrom	The time point at which the certificate becomes valid, in UTC.
CurrentCertValidTo	The time point at which the certificate expires, in UTC.
DocumentFormat	Defines the format of the Office document.
EnableXAdES	Specifies if an advanced signature (XAdES) will be produced.
ExternalCryptoAsyncDocumentID	Specifies the document ID for SignAsyncEnd() call Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch.
ExternalCryptoCustomParams	Custom parameters to be passed to the signing service (uninterpreted).
ExternalCryptoData	Additional data to be included in the async state and mirrored back by the requestor.
ExternalCryptoExternalHashCalculation	Specifies whether the message hash is to be calculated at the external endpoint.
ExternalCryptoHashAlgorithm	Specifies the request's signature hash algorithm.
ExternalCryptoKeyID	The ID of the pre-shared key used for DC request authentication.
ExternalCryptoKeySecret	The pre-shared key used for DC request authentication.
ExternalCryptoMethod	Specifies the asynchronous signing method.
ExternalCryptoMode	Specifies the external cryptography mode.
ExternalCryptoPublicKeyAlgorithm	Provide public key algorithm here if the certificate is not available on the pre-signing stage.
FIPSMode	Reserved.
HashAlgorithm	Specifies the hash algorithm to be used.
IgnoreChainValidationErrors	Makes the class tolerant to chain validation errors.
InputBytes	Use this property to pass the input to class in the byte array form.
InputFile	The file to be signed.
InterimValidationDetails	Contains the validation details of the moment.
InterimValidationResult	Contains the validation status of the moment.
KnownCertCount	The number of records in the KnownCert arrays.
KnownCertBytes	Returns raw certificate data in DER format.
KnownCertHandle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
KnownCRLCount	The number of records in the KnownCRL arrays.
KnownCRLBytes	Returns raw CRL data in DER format.
KnownCRLHandle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
KnownOCSPCount	The number of records in the KnownOCSP arrays.
KnownOCSPBytes	Buffer containing raw OCSP response data.
KnownOCSPHandle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
OfflineMode	Switches the class to the offline mode.
OutputBytes	Use this property to read the output the class object has produced.
OutputFile	Defines where to save the signed document.
Profile	Specifies a pre-defined profile to apply when creating the signature.
ProxyAddress	The IP address of the proxy server.
ProxyAuthentication	The authentication type used by the proxy server.
ProxyPassword	The password to authenticate to the proxy server.
ProxyPort	The port on the proxy server to connect to.
ProxyProxyType	The type of the proxy server.
ProxyRequestHeaders	Contains HTTP request headers for WebTunnel and HTTP proxy.
ProxyResponseBody	Contains the HTTP or HTTPS (WebTunnel) proxy response body.
ProxyResponseHeaders	Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.
ProxyUseIPv6	Specifies whether IPv6 should be used when connecting through the proxy.
ProxyUseProxy	Enables or disables proxy-driven connection.
ProxyUsername	Specifies the username credential for proxy authentication.
RevocationCheck	Specifies the kind(s) of revocation check to perform.
SignatureIndex	The index of the signature to update.
SignatureType	Specifies the type of the signature to be made.
SignCoreProperties	Whether to sign the core properties of the document.
SignDocument	Whether to sign the document itself.
SigningCertBytes	Returns raw certificate data in DER format.
SigningCertHandle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
SigningChainCount	The number of records in the SigningChain arrays.
SigningChainBytes	Returns raw certificate data in DER format.
SigningChainHandle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
SignSignatureOrigin	Whether to sign the signature origin.
SocketDNSMode	Selects the DNS resolver to use: the class's (secure) built-in one, or the one provided by the system.
SocketDNSPort	Specifies the port number to be used for sending queries to the DNS server.
SocketDNSQueryTimeout	The timeout (in milliseconds) for each DNS query.
SocketDNSServers	The addresses of DNS servers to use for address resolution, separated by commas or semicolons.
SocketDNSTotalTimeout	The timeout (in milliseconds) for the whole resolution process.
SocketIncomingSpeedLimit	The maximum number of bytes to read from the socket, per second.
SocketLocalAddress	The local network interface to bind the socket to.
SocketLocalPort	The local port number to bind the socket to.
SocketOutgoingSpeedLimit	The maximum number of bytes to write to the socket, per second.
SocketTimeout	The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.
SocketUseIPv6	Enables or disables IP protocol version 6.
TimestampServer	The address of the timestamping server.
TLSClientCertCount	The number of records in the TLSClientCert arrays.
TLSClientCertBytes	Returns raw certificate data in DER format.
TLSClientCertHandle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
TLSServerCertCount	The number of records in the TLSServerCert arrays.
TLSServerCertBytes	Returns raw certificate data in DER format.
TLSServerCertHandle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
TLSAutoValidateCertificates	Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.
TLSBaseConfiguration	Selects the base configuration for the TLS settings.
TLSCiphersuites	A list of ciphersuites separated with commas or semicolons.
TLSECCurves	Defines the elliptic curves to enable.
TLSExtensions	Provides access to TLS extensions.
TLSForceResumeIfDestinationChanges	Whether to force TLS session resumption when the destination address changes.
TLSPreSharedIdentity	Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
TLSPreSharedKey	Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.
TLSPreSharedKeyCiphersuite	Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.
TLSRenegotiationAttackPreventionMode	Selects renegotiation attack prevention mechanism.
TLSRevocationCheck	Specifies the kind(s) of revocation check to perform.
TLSSSLOptions	Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.
TLSTLSMode	Specifies the TLS mode to use.
TLSUseExtendedMasterSecret	Enables Extended Master Secret Extension, as defined in RFC 7627.
TLSUseSessionResumption	Enables or disables TLS session resumption capability.
TLSVersions	Th SSL/TLS versions to enable by default.
TrustedCertCount	The number of records in the TrustedCert arrays.
TrustedCertBytes	Returns raw certificate data in DER format.
TrustedCertHandle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
ValidationLog	Contains the complete log of the certificate validation routine.
XAdESForm	Specifies which form of XAdES should be produced.
XAdESVersion	Specifies XAdES version.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.


Config	Sets or retrieves a configuration setting.
DoAction	Performs an additional action.
ExtractAsyncData	Extracts user data from the DC signing service response.
Sign	Calculates the signature value.
SignAsyncBegin	Initiates the asynchronous signing operation.
SignAsyncEnd	Completes the asynchronous signing operation.
SignExternal	Signs the document using an external signing facility.
Timestamp	Use this method to add timestamp.
Upgrade	Upgrades existing XAdES signature to a new form.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.


ChainElementDownload	TBD.
ChainElementNeeded	TBD.
Error	Information about errors during signing.
ExternalSign	Handles remote or external signing initiated by the SignExternal method or other source.
Notification	This event notifies the application about an underlying control flow event.
StoreCertificate	This event is fired when a certificate should be stored along with a signature.
StoreCRL	This event is fired when a CRL should be stored along with a signature.
StoreOCSPResponse	This event is fired when a OCSP Response should be stored along with a signature.
TLSCertValidate	This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.
ValidationProgress	TBD.

Configuration Settings

The following is a list of configuration settings for the class with short descriptions. Click on the links for further details.


ClaimedRoleText	The text of the claimed role.
ClaimedRoleXML	The XML content of the claimed roles.
CommitmentTypeIndicationAllSignedDataObjects[Index]	Specifies the CommitmentTypeIndication's AllSignedDataObjects.
CommitmentTypeIndicationCount	The number of the CommitmentTypeIndication elements.
CommitmentTypeIndicationIdentifier[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's Identifier.
CommitmentTypeIndicationIdentifierDescription[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's Description.
CommitmentTypeIndicationIdentifierDocumentationReferences[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences.
CommitmentTypeIndicationIdentifierQualifier[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier.
CommitmentTypeIndicationObjectReference[Index]	Specifies the CommitmentTypeIndication's ObjectReference.
CommitmentTypeIndicationQualifiersXML[Index]	The XML content of the CommitmentTypeIndication's Qualifiers.
ExpireTime	Signature expiration time in UTC.
ForceCompleteChainValidation	Whether to check the CA certificates when the signing certificate is invalid.
ForceCompleteChainValidationForTrusted	Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors.
GracePeriod	Specifies a grace period to apply during revocation information checks.
IgnoreOCSPNoCheckExtension	Whether OCSP NoCheck extension should be ignored.
IgnoreSystemTrust	Whether trusted Windows Certificate Stores should be treated as trusted.
IgnoreTimestampFailure	Whether to ignore time-stamping failure during signing.
ImplicitlyTrustSelfSignedCertificates	Whether to trust self-signed certificates.
IncludeKnownRevocationInfoToSignature	Whether to include custom revocation info to the signature.
ProductionPlace	Identifies the place of the signature production.
PromoteLongOCSPResponses	Whether long OCSP responses are requested.
RefsTimestampType	Specifies references timestamp type to include to the signature.
SignatureInfoAddress1	Specifies the location at which the signature was created.
SignatureInfoAddress2	Specifies the location at which the signature was created.
SignatureInfoComments	Comments to the signature info text.
SignatureInfoDelegateSuggestedSigner	Specifies the name of a person.
SignatureInfoDelegateSuggestedSigner2	Specifies the title of a person.
SignatureInfoDelegateSuggestedSignerEmail	Specifies the e-mail address of a person.
SignatureInfoImage	Specifies an image for the digital signature.
SignatureInfoIncluded	Whether to include the signature info.
SignatureInfoInvalidLnImage	Specifies the image of an invalid signature.
SignatureInfoSignatureType	Specifies the type of the digital signature.
SignatureInfoText	The text to be displayed as the signature info.
SignatureInfoValidLnImage	Specifies the image of a valid signature.
SignatureLineAdditionalSignatureInfo[Index]	Contains additional signature information.
SignatureLineAllowComments[Index]	Indicates if comments are allowed.
SignatureLineCount	The number of signature lines.
SignatureLineId[Index]	Contains signature unique ID.
SignatureLineImageData[Index]	Contains signature image.
SignatureLineIndex	Specifies the index of the signature line to sign.
SignatureLineShowSignDate[Index]	Indicates if signing date should be shown.
SignatureLineSignatureIndex[Index]	The index of the signature that signs signature line.
SignatureLineSignatureProviderId[Index]	Contains signature provider ID.
SignatureLineSignatureProviderUrl[Index]	Contains signature provider URL.
SignatureLineSigned[Index]	Indicates if signature line is signed.
SignatureLineSigningInstructions[Index]	Contains signing instructions.
SignatureLineSuggestedSigner2[Index]	Suggested signer line two.
SignatureLineSuggestedSigner[Index]	Suggested signer line one.
SignatureLineSuggestedSignerEmail[Index]	Suggested signer email address.
SignTime	Specifies the signing time in UTC.
SigPolicyDescription	signature policy description.
SigPolicyExplicitText	The explicit text of the user notice.
SigPolicyHash	The hash value of the signature policy.
SigPolicyHashAlgorithm	Specifies the hash algorithm used to compute the signature policy hash.
SigPolicyID	Identifies the signature policy.
SigPolicyNoticeNumbers	Contains user notice numbers.
SigPolicyNoticeOrganization	The organization part of the NoticeReference qualifier.
SigPolicyURI	Signature policy URI.
TempPath	Location where the temporary files are stored.
TimestampCanonicalizationMethod	Specifies canonicalization method used in timestamp.
TimestampValidationDataDetails	Specifies timestamp validation data details to include to the signature.
TLSChainValidationDetails	Contains the advanced details of the TLS server certificate validation.
TLSChainValidationResult	Contains the result of the TLS server certificate validation.
TLSClientAuthRequested	Indicates whether the TLS server requests client authentication.
TLSValidationLog	Contains the log of the TLS server certificate validation.
TolerateMinorChainIssues	Whether to tolerate minor chain issues.
TspHashAlgorithm	Sets a specific hash algorithm for use with the timestamping service.
UseMicrosoftCTL	Enables or disables automatic use of Microsoft online certificate trust list.
UseSystemCertificates	Enables or disables the use of the system certificates.
ValidationDataRefsDetails	Specifies validation data references details to include to the signature.
ValidationDataValuesDetails	Specifies validation data values details to include to the signature.
CheckKeyIntegrityBeforeUse	Enables or disable private key integrity check before use.
CookieCaching	Specifies whether a cookie cache should be used for HTTP(S) transports.
Cookies	Gets or sets local cookies for the class (supported for HTTPClient, RESTClient and SOAPClient only).
DefDeriveKeyIterations	Specifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHE	Enables or disables finite field DHE key exchange support in TLS clients.
GlobalCookies	Gets or sets global cookies for all the HTTP transports.
HttpUserAgent	Specifies the user agent name to be used by all HTTP clients.
LogDestination	Specifies the debug log destination.
LogDetails	Specifies the debug log details to dump.
LogFile	Specifies the debug log filename.
LogFilters	Specifies the debug log filters.
LogFlushMode	Specifies the log flush mode.
LogLevel	Specifies the debug log level.
LogMaxEventCount	Specifies the maximum number of events to cache before further action is taken.
LogRotationMode	Specifies the log rotation mode.
MaxASN1BufferLength	Specifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepth	Specifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithm	Specifies the hash algorithm to be used to identify certificates in OCSP requests.
Tag	Allows to store any custom data.
UseSharedSystemStorages	Specifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSS	Enforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandom	Enables or disables the use of the OS PRNG.

BlockedCertCount Property (OfficeSigner Class)

The number of records in the BlockedCert arrays.

Syntax

int GetBlockedCertCount();
int SetBlockedCertCount(int iBlockedCertCount);

Default Value

Remarks

This property controls the size of the following arrays:

BlockedCertBytes
BlockedCertHandle

The array indices start at 0 and end at BlockedCertCount - 1.

This property is not available at design time.

Data Type

Integer

BlockedCertBytes Property (OfficeSigner Class)

Returns raw certificate data in DER format.

Syntax

QByteArray GetBlockedCertBytes(int iBlockedCertIndex);

Remarks

Returns raw certificate data in DER format.

The BlockedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

BlockedCertHandle Property (OfficeSigner Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

qint64 GetBlockedCertHandle(int iBlockedCertIndex);
int SetBlockedCertHandle(int iBlockedCertIndex, qint64 lBlockedCertHandle);

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The BlockedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is not available at design time.

Data Type

Long64

ChainValidationDetails Property (OfficeSigner Class)

The details of a certificate chain validation outcome.

Syntax

int GetChainValidationDetails();

Default Value

Remarks

Use the value(s) returned by this property to identify the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

This property is read-only and not available at design time.

Data Type

Integer

ChainValidationResult Property (OfficeSigner Class)

The general outcome of a certificate chain validation routine. Use ChainValidationDetails to get information about the reasons that contributed to the validation result.

Syntax

int GetChainValidationResult();

Possible Values

CVT_VALID(0), 
CVT_VALID_BUT_UNTRUSTED(1), 
CVT_INVALID(2), 
CVT_CANT_BE_ESTABLISHED(3)

Default Value

Remarks

Available options:


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

This property is read-only and not available at design time.

Data Type

Integer

ClaimedSigningTime Property (OfficeSigner Class)

The signing time from the signer's computer.

Syntax

QString GetClaimedSigningTime();
int SetClaimedSigningTime(QString qsClaimedSigningTime);

Default Value

Remarks

Use this property to provide the signature production time. The claimed time is not supported by a trusted source; it may be inaccurate, forfeited, or wrong, and as such is usually taken for informational purposes only by verifiers. Use timestamp servers to embed verifiable trusted timestamps. The time is in UTC.

Data Type

String

CurrentCACertBytes Property (OfficeSigner Class)

Returns raw certificate data in DER format.

Syntax

QByteArray GetCurrentCACertBytes();

Remarks

Returns raw certificate data in DER format.

This property is read-only and not available at design time.

Data Type

Byte Array

CurrentCACertCA Property (OfficeSigner Class)

Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension).

Syntax

bool GetCurrentCACertCA();

Default Value

false

Remarks

Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension).

This property is read-only and not available at design time.

Data Type

Boolean

CurrentCACertCAKeyID Property (OfficeSigner Class)

A unique identifier (fingerprint) of the CA certificate's private key.

Syntax

QByteArray GetCurrentCACertCAKeyID();

Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

This property is read-only and not available at design time.

Data Type

Byte Array

CurrentCACertCRLDistributionPoints Property (OfficeSigner Class)

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

Syntax

QString GetCurrentCACertCRLDistributionPoints();

Default Value

Remarks

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

This property is read-only and not available at design time.

Data Type

String

CurrentCACertCurve Property (OfficeSigner Class)

Specifies the elliptic curve of the EC public key.

Syntax

QString GetCurrentCACertCurve();

Default Value

Remarks

Specifies the elliptic curve of the EC public key.


SB_EC_SECP112R1	`SECP112R1`
SB_EC_SECP112R2	`SECP112R2`
SB_EC_SECP128R1	`SECP128R1`
SB_EC_SECP128R2	`SECP128R2`
SB_EC_SECP160K1	`SECP160K1`
SB_EC_SECP160R1	`SECP160R1`
SB_EC_SECP160R2	`SECP160R2`
SB_EC_SECP192K1	`SECP192K1`
SB_EC_SECP192R1	`SECP192R1`
SB_EC_SECP224K1	`SECP224K1`
SB_EC_SECP224R1	`SECP224R1`
SB_EC_SECP256K1	`SECP256K1`
SB_EC_SECP256R1	`SECP256R1`
SB_EC_SECP384R1	`SECP384R1`
SB_EC_SECP521R1	`SECP521R1`
SB_EC_SECT113R1	`SECT113R1`
SB_EC_SECT113R2	`SECT113R2`
SB_EC_SECT131R1	`SECT131R1`
SB_EC_SECT131R2	`SECT131R2`
SB_EC_SECT163K1	`SECT163K1`
SB_EC_SECT163R1	`SECT163R1`
SB_EC_SECT163R2	`SECT163R2`
SB_EC_SECT193R1	`SECT193R1`
SB_EC_SECT193R2	`SECT193R2`
SB_EC_SECT233K1	`SECT233K1`
SB_EC_SECT233R1	`SECT233R1`
SB_EC_SECT239K1	`SECT239K1`
SB_EC_SECT283K1	`SECT283K1`
SB_EC_SECT283R1	`SECT283R1`
SB_EC_SECT409K1	`SECT409K1`
SB_EC_SECT409R1	`SECT409R1`
SB_EC_SECT571K1	`SECT571K1`
SB_EC_SECT571R1	`SECT571R1`
SB_EC_PRIME192V1	`PRIME192V1`
SB_EC_PRIME192V2	`PRIME192V2`
SB_EC_PRIME192V3	`PRIME192V3`
SB_EC_PRIME239V1	`PRIME239V1`
SB_EC_PRIME239V2	`PRIME239V2`
SB_EC_PRIME239V3	`PRIME239V3`
SB_EC_PRIME256V1	`PRIME256V1`
SB_EC_C2PNB163V1	`C2PNB163V1`
SB_EC_C2PNB163V2	`C2PNB163V2`
SB_EC_C2PNB163V3	`C2PNB163V3`
SB_EC_C2PNB176W1	`C2PNB176W1`
SB_EC_C2TNB191V1	`C2TNB191V1`
SB_EC_C2TNB191V2	`C2TNB191V2`
SB_EC_C2TNB191V3	`C2TNB191V3`
SB_EC_C2ONB191V4	`C2ONB191V4`
SB_EC_C2ONB191V5	`C2ONB191V5`
SB_EC_C2PNB208W1	`C2PNB208W1`
SB_EC_C2TNB239V1	`C2TNB239V1`
SB_EC_C2TNB239V2	`C2TNB239V2`
SB_EC_C2TNB239V3	`C2TNB239V3`
SB_EC_C2ONB239V4	`C2ONB239V4`
SB_EC_C2ONB239V5	`C2ONB239V5`
SB_EC_C2PNB272W1	`C2PNB272W1`
SB_EC_C2PNB304W1	`C2PNB304W1`
SB_EC_C2TNB359V1	`C2TNB359V1`
SB_EC_C2PNB368W1	`C2PNB368W1`
SB_EC_C2TNB431R1	`C2TNB431R1`
SB_EC_NISTP192	`NISTP192`
SB_EC_NISTP224	`NISTP224`
SB_EC_NISTP256	`NISTP256`
SB_EC_NISTP384	`NISTP384`
SB_EC_NISTP521	`NISTP521`
SB_EC_NISTB163	`NISTB163`
SB_EC_NISTB233	`NISTB233`
SB_EC_NISTB283	`NISTB283`
SB_EC_NISTB409	`NISTB409`
SB_EC_NISTB571	`NISTB571`
SB_EC_NISTK163	`NISTK163`
SB_EC_NISTK233	`NISTK233`
SB_EC_NISTK283	`NISTK283`
SB_EC_NISTK409	`NISTK409`
SB_EC_NISTK571	`NISTK571`
SB_EC_GOSTCPTEST	`GOSTCPTEST`
SB_EC_GOSTCPA	`GOSTCPA`
SB_EC_GOSTCPB	`GOSTCPB`
SB_EC_GOSTCPC	`GOSTCPC`
SB_EC_GOSTCPXCHA	`GOSTCPXCHA`
SB_EC_GOSTCPXCHB	`GOSTCPXCHB`
SB_EC_BRAINPOOLP160R1	`BRAINPOOLP160R1`
SB_EC_BRAINPOOLP160T1	`BRAINPOOLP160T1`
SB_EC_BRAINPOOLP192R1	`BRAINPOOLP192R1`
SB_EC_BRAINPOOLP192T1	`BRAINPOOLP192T1`
SB_EC_BRAINPOOLP224R1	`BRAINPOOLP224R1`
SB_EC_BRAINPOOLP224T1	`BRAINPOOLP224T1`
SB_EC_BRAINPOOLP256R1	`BRAINPOOLP256R1`
SB_EC_BRAINPOOLP256T1	`BRAINPOOLP256T1`
SB_EC_BRAINPOOLP320R1	`BRAINPOOLP320R1`
SB_EC_BRAINPOOLP320T1	`BRAINPOOLP320T1`
SB_EC_BRAINPOOLP384R1	`BRAINPOOLP384R1`
SB_EC_BRAINPOOLP384T1	`BRAINPOOLP384T1`
SB_EC_BRAINPOOLP512R1	`BRAINPOOLP512R1`
SB_EC_BRAINPOOLP512T1	`BRAINPOOLP512T1`
SB_EC_CURVE25519	`CURVE25519`
SB_EC_CURVE448	`CURVE448`

This property is read-only and not available at design time.

Data Type

String

CurrentCACertFingerprint Property (OfficeSigner Class)

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

QByteArray GetCurrentCACertFingerprint();

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

This property is read-only and not available at design time.

Data Type

Byte Array

CurrentCACertFriendlyName Property (OfficeSigner Class)

Contains an associated alias (friendly name) of the certificate.

Syntax

QString GetCurrentCACertFriendlyName();

Default Value

Remarks

Contains an associated alias (friendly name) of the certificate.

This property is read-only and not available at design time.

Data Type

String

CurrentCACertHandle Property (OfficeSigner Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

qint64 GetCurrentCACertHandle();

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

This property is read-only and not available at design time.

Data Type

Long64

CurrentCACertHashAlgorithm Property (OfficeSigner Class)

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .

Syntax

QString GetCurrentCACertHashAlgorithm();

Default Value

Remarks

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

This property is read-only and not available at design time.

Data Type

String

CurrentCACertIssuer Property (OfficeSigner Class)

The common name of the certificate issuer (CA), typically a company name.

Syntax

QString GetCurrentCACertIssuer();

Default Value

Remarks

The common name of the certificate issuer (CA), typically a company name.

This property is read-only and not available at design time.

Data Type

String

CurrentCACertIssuerRDN Property (OfficeSigner Class)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Syntax

QString GetCurrentCACertIssuerRDN();

Default Value

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

This property is read-only and not available at design time.

Data Type

String

CurrentCACertKeyAlgorithm Property (OfficeSigner Class)

Specifies the public key algorithm of this certificate.

Syntax

QString GetCurrentCACertKeyAlgorithm();

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

This property is read-only and not available at design time.

Data Type

String

CurrentCACertKeyBits Property (OfficeSigner Class)

Returns the length of the public key.

Syntax

int GetCurrentCACertKeyBits();

Default Value

Remarks

Returns the length of the public key.

This property is read-only and not available at design time.

Data Type

Integer

CurrentCACertKeyFingerprint Property (OfficeSigner Class)

Returns a fingerprint of the public key contained in the certificate.

Syntax

QByteArray GetCurrentCACertKeyFingerprint();

Remarks

Returns a fingerprint of the public key contained in the certificate.

This property is read-only and not available at design time.

Data Type

Byte Array

CurrentCACertKeyUsage Property (OfficeSigner Class)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

int GetCurrentCACertKeyUsage();

Default Value

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:


ckuUnknown	`0x00000`	Unknown key usage
ckuDigitalSignature	`0x00001`	Digital signature
ckuNonRepudiation	`0x00002`	Non-repudiation
ckuKeyEncipherment	`0x00004`	Key encipherment
ckuDataEncipherment	`0x00008`	Data encipherment
ckuKeyAgreement	`0x00010`	Key agreement
ckuKeyCertSign	`0x00020`	Certificate signing
ckuCRLSign	`0x00040`	Revocation signing
ckuEncipherOnly	`0x00080`	Encipher only
ckuDecipherOnly	`0x00100`	Decipher only
ckuServerAuthentication	`0x00200`	Server authentication
ckuClientAuthentication	`0x00400`	Client authentication
ckuCodeSigning	`0x00800`	Code signing
ckuEmailProtection	`0x01000`	Email protection
ckuTimeStamping	`0x02000`	Timestamping
ckuOCSPSigning	`0x04000`	OCSP signing
ckuSmartCardLogon	`0x08000`	Smartcard logon
ckuKeyPurposeClientAuth	`0x10000`	Kerberos - client authentication
ckuKeyPurposeKDC	`0x20000`	Kerberos - KDC

This property is read-only and not available at design time.

Data Type

Integer

CurrentCACertKeyValid Property (OfficeSigner Class)

Returns True if the certificate's key is cryptographically valid, and False otherwise.

Syntax

bool GetCurrentCACertKeyValid();

Default Value

false

Remarks

Returns True if the certificate's key is cryptographically valid, and False otherwise.

This property is read-only and not available at design time.

Data Type

Boolean

CurrentCACertOCSPLocations Property (OfficeSigner Class)

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

Syntax

QString GetCurrentCACertOCSPLocations();

Default Value

Remarks

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

This property is read-only and not available at design time.

Data Type

String

CurrentCACertOCSPNoCheck Property (OfficeSigner Class)

TBD.

Syntax

bool GetCurrentCACertOCSPNoCheck();

Default Value

false

Remarks

TBD.

This property is read-only and not available at design time.

Data Type

Boolean

CurrentCACertOrigin Property (OfficeSigner Class)

Returns the origin of this certificate.

Syntax

int GetCurrentCACertOrigin();

Default Value

Remarks

Returns the origin of this certificate.

This property is read-only and not available at design time.

Data Type

Integer

CurrentCACertPolicyIDs Property (OfficeSigner Class)

Contains identifiers (OIDs) of the applicable certificate policies.

Syntax

QString GetCurrentCACertPolicyIDs();

Default Value

Remarks

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

This property is read-only and not available at design time.

Data Type

String

CurrentCACertPrivateKeyBytes Property (OfficeSigner Class)

Contains the certificate's private key.

Syntax

QByteArray GetCurrentCACertPrivateKeyBytes();

Remarks

Contains the certificate's private key. It is normal for this property to be empty if the private key is non-exportable.

This property is read-only and not available at design time.

Data Type

Byte Array

CurrentCACertPrivateKeyExists Property (OfficeSigner Class)

Indicates whether the certificate has an associated private key.

Syntax

bool GetCurrentCACertPrivateKeyExists();

Default Value

false

Remarks

Indicates whether the certificate has an associated private key.

This property is read-only and not available at design time.

Data Type

Boolean

CurrentCACertPrivateKeyExtractable Property (OfficeSigner Class)

Indicates whether the private key is extractable.

Syntax

bool GetCurrentCACertPrivateKeyExtractable();

Default Value

false

Remarks

Indicates whether the private key is extractable

This property is read-only and not available at design time.

Data Type

Boolean

CurrentCACertPublicKeyBytes Property (OfficeSigner Class)

Contains the certificate's public key in DER format.

Syntax

QByteArray GetCurrentCACertPublicKeyBytes();

Remarks

Contains the certificate's public key in DER format.

This property is read-only and not available at design time.

Data Type

Byte Array

CurrentCACertQualifiedStatements Property (OfficeSigner Class)

TBD.

Syntax

int GetCurrentCACertQualifiedStatements();

Possible Values

QST_NON_QUALIFIED(0), 
QST_QUALIFIED_HARDWARE(1), 
QST_QUALIFIED_SOFTWARE(2)

Default Value

Remarks

TBD

This property is read-only and not available at design time.

Data Type

Integer

CurrentCACertSelfSigned Property (OfficeSigner Class)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

bool GetCurrentCACertSelfSigned();

Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

This property is read-only and not available at design time.

Data Type

Boolean

CurrentCACertSerialNumber Property (OfficeSigner Class)

Returns the certificate's serial number.

Syntax

QByteArray GetCurrentCACertSerialNumber();

Remarks

Returns the certificate's serial number.

This property is read-only and not available at design time.

Data Type

Byte Array

CurrentCACertSigAlgorithm Property (OfficeSigner Class)

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

QString GetCurrentCACertSigAlgorithm();

Default Value

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

This property is read-only and not available at design time.

Data Type

String

CurrentCACertSubject Property (OfficeSigner Class)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

QString GetCurrentCACertSubject();

Default Value

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

This property is read-only and not available at design time.

Data Type

String

CurrentCACertSubjectAlternativeName Property (OfficeSigner Class)

TBD.

Syntax

QString GetCurrentCACertSubjectAlternativeName();

Default Value

Remarks

TBD.

This property is read-only and not available at design time.

Data Type

String

CurrentCACertSubjectKeyID Property (OfficeSigner Class)

Contains a unique identifier (fingerprint) of the certificate's private key.

Syntax

QByteArray GetCurrentCACertSubjectKeyID();

Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

This property is read-only and not available at design time.

Data Type

Byte Array

CurrentCACertSubjectRDN Property (OfficeSigner Class)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Syntax

QString GetCurrentCACertSubjectRDN();

Default Value

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

This property is read-only and not available at design time.

Data Type

String

CurrentCACertValidFrom Property (OfficeSigner Class)

The time point at which the certificate becomes valid, in UTC.

Syntax

QString GetCurrentCACertValidFrom();

Default Value

Remarks

The time point at which the certificate becomes valid, in UTC.

This property is read-only and not available at design time.

Data Type

String

CurrentCACertValidTo Property (OfficeSigner Class)

The time point at which the certificate expires, in UTC.

Syntax

QString GetCurrentCACertValidTo();

Default Value

Remarks

The time point at which the certificate expires, in UTC.

This property is read-only and not available at design time.

Data Type

String

CurrentCertBytes Property (OfficeSigner Class)

Returns raw certificate data in DER format.

Syntax

QByteArray GetCurrentCertBytes();

Remarks

Returns raw certificate data in DER format.

This property is read-only and not available at design time.

Data Type

Byte Array

CurrentCertCA Property (OfficeSigner Class)

Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension).

Syntax

bool GetCurrentCertCA();

Default Value

false

Remarks

Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension).

This property is read-only and not available at design time.

Data Type

Boolean

CurrentCertCAKeyID Property (OfficeSigner Class)

A unique identifier (fingerprint) of the CA certificate's private key.

Syntax

QByteArray GetCurrentCertCAKeyID();

Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

This property is read-only and not available at design time.

Data Type

Byte Array

CurrentCertCRLDistributionPoints Property (OfficeSigner Class)

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

Syntax

QString GetCurrentCertCRLDistributionPoints();

Default Value

Remarks

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

This property is read-only and not available at design time.

Data Type

String

CurrentCertCurve Property (OfficeSigner Class)

Specifies the elliptic curve of the EC public key.

Syntax

QString GetCurrentCertCurve();

Default Value

Remarks

Specifies the elliptic curve of the EC public key.


SB_EC_SECP112R1	`SECP112R1`
SB_EC_SECP112R2	`SECP112R2`
SB_EC_SECP128R1	`SECP128R1`
SB_EC_SECP128R2	`SECP128R2`
SB_EC_SECP160K1	`SECP160K1`
SB_EC_SECP160R1	`SECP160R1`
SB_EC_SECP160R2	`SECP160R2`
SB_EC_SECP192K1	`SECP192K1`
SB_EC_SECP192R1	`SECP192R1`
SB_EC_SECP224K1	`SECP224K1`
SB_EC_SECP224R1	`SECP224R1`
SB_EC_SECP256K1	`SECP256K1`
SB_EC_SECP256R1	`SECP256R1`
SB_EC_SECP384R1	`SECP384R1`
SB_EC_SECP521R1	`SECP521R1`
SB_EC_SECT113R1	`SECT113R1`
SB_EC_SECT113R2	`SECT113R2`
SB_EC_SECT131R1	`SECT131R1`
SB_EC_SECT131R2	`SECT131R2`
SB_EC_SECT163K1	`SECT163K1`
SB_EC_SECT163R1	`SECT163R1`
SB_EC_SECT163R2	`SECT163R2`
SB_EC_SECT193R1	`SECT193R1`
SB_EC_SECT193R2	`SECT193R2`
SB_EC_SECT233K1	`SECT233K1`
SB_EC_SECT233R1	`SECT233R1`
SB_EC_SECT239K1	`SECT239K1`
SB_EC_SECT283K1	`SECT283K1`
SB_EC_SECT283R1	`SECT283R1`
SB_EC_SECT409K1	`SECT409K1`
SB_EC_SECT409R1	`SECT409R1`
SB_EC_SECT571K1	`SECT571K1`
SB_EC_SECT571R1	`SECT571R1`
SB_EC_PRIME192V1	`PRIME192V1`
SB_EC_PRIME192V2	`PRIME192V2`
SB_EC_PRIME192V3	`PRIME192V3`
SB_EC_PRIME239V1	`PRIME239V1`
SB_EC_PRIME239V2	`PRIME239V2`
SB_EC_PRIME239V3	`PRIME239V3`
SB_EC_PRIME256V1	`PRIME256V1`
SB_EC_C2PNB163V1	`C2PNB163V1`
SB_EC_C2PNB163V2	`C2PNB163V2`
SB_EC_C2PNB163V3	`C2PNB163V3`
SB_EC_C2PNB176W1	`C2PNB176W1`
SB_EC_C2TNB191V1	`C2TNB191V1`
SB_EC_C2TNB191V2	`C2TNB191V2`
SB_EC_C2TNB191V3	`C2TNB191V3`
SB_EC_C2ONB191V4	`C2ONB191V4`
SB_EC_C2ONB191V5	`C2ONB191V5`
SB_EC_C2PNB208W1	`C2PNB208W1`
SB_EC_C2TNB239V1	`C2TNB239V1`
SB_EC_C2TNB239V2	`C2TNB239V2`
SB_EC_C2TNB239V3	`C2TNB239V3`
SB_EC_C2ONB239V4	`C2ONB239V4`
SB_EC_C2ONB239V5	`C2ONB239V5`
SB_EC_C2PNB272W1	`C2PNB272W1`
SB_EC_C2PNB304W1	`C2PNB304W1`
SB_EC_C2TNB359V1	`C2TNB359V1`
SB_EC_C2PNB368W1	`C2PNB368W1`
SB_EC_C2TNB431R1	`C2TNB431R1`
SB_EC_NISTP192	`NISTP192`
SB_EC_NISTP224	`NISTP224`
SB_EC_NISTP256	`NISTP256`
SB_EC_NISTP384	`NISTP384`
SB_EC_NISTP521	`NISTP521`
SB_EC_NISTB163	`NISTB163`
SB_EC_NISTB233	`NISTB233`
SB_EC_NISTB283	`NISTB283`
SB_EC_NISTB409	`NISTB409`
SB_EC_NISTB571	`NISTB571`
SB_EC_NISTK163	`NISTK163`
SB_EC_NISTK233	`NISTK233`
SB_EC_NISTK283	`NISTK283`
SB_EC_NISTK409	`NISTK409`
SB_EC_NISTK571	`NISTK571`
SB_EC_GOSTCPTEST	`GOSTCPTEST`
SB_EC_GOSTCPA	`GOSTCPA`
SB_EC_GOSTCPB	`GOSTCPB`
SB_EC_GOSTCPC	`GOSTCPC`
SB_EC_GOSTCPXCHA	`GOSTCPXCHA`
SB_EC_GOSTCPXCHB	`GOSTCPXCHB`
SB_EC_BRAINPOOLP160R1	`BRAINPOOLP160R1`
SB_EC_BRAINPOOLP160T1	`BRAINPOOLP160T1`
SB_EC_BRAINPOOLP192R1	`BRAINPOOLP192R1`
SB_EC_BRAINPOOLP192T1	`BRAINPOOLP192T1`
SB_EC_BRAINPOOLP224R1	`BRAINPOOLP224R1`
SB_EC_BRAINPOOLP224T1	`BRAINPOOLP224T1`
SB_EC_BRAINPOOLP256R1	`BRAINPOOLP256R1`
SB_EC_BRAINPOOLP256T1	`BRAINPOOLP256T1`
SB_EC_BRAINPOOLP320R1	`BRAINPOOLP320R1`
SB_EC_BRAINPOOLP320T1	`BRAINPOOLP320T1`
SB_EC_BRAINPOOLP384R1	`BRAINPOOLP384R1`
SB_EC_BRAINPOOLP384T1	`BRAINPOOLP384T1`
SB_EC_BRAINPOOLP512R1	`BRAINPOOLP512R1`
SB_EC_BRAINPOOLP512T1	`BRAINPOOLP512T1`
SB_EC_CURVE25519	`CURVE25519`
SB_EC_CURVE448	`CURVE448`

This property is read-only and not available at design time.

Data Type

String

CurrentCertFingerprint Property (OfficeSigner Class)

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

QByteArray GetCurrentCertFingerprint();

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

This property is read-only and not available at design time.

Data Type

Byte Array

CurrentCertFriendlyName Property (OfficeSigner Class)

Contains an associated alias (friendly name) of the certificate.

Syntax

QString GetCurrentCertFriendlyName();

Default Value

Remarks

Contains an associated alias (friendly name) of the certificate.

This property is read-only and not available at design time.

Data Type

String

CurrentCertHandle Property (OfficeSigner Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

qint64 GetCurrentCertHandle();

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

This property is read-only and not available at design time.

Data Type

Long64

CurrentCertHashAlgorithm Property (OfficeSigner Class)

Syntax

QString GetCurrentCertHashAlgorithm();

Default Value

Remarks

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

This property is read-only and not available at design time.

Data Type

String

CurrentCertIssuer Property (OfficeSigner Class)

The common name of the certificate issuer (CA), typically a company name.

Syntax

QString GetCurrentCertIssuer();

Default Value

Remarks

The common name of the certificate issuer (CA), typically a company name.

This property is read-only and not available at design time.

Data Type

String

CurrentCertIssuerRDN Property (OfficeSigner Class)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Syntax

QString GetCurrentCertIssuerRDN();

Default Value

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

This property is read-only and not available at design time.

Data Type

String

CurrentCertKeyAlgorithm Property (OfficeSigner Class)

Specifies the public key algorithm of this certificate.

Syntax

QString GetCurrentCertKeyAlgorithm();

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

This property is read-only and not available at design time.

Data Type

String

CurrentCertKeyBits Property (OfficeSigner Class)

Returns the length of the public key.

Syntax

int GetCurrentCertKeyBits();

Default Value

Remarks

Returns the length of the public key.

This property is read-only and not available at design time.

Data Type

Integer

CurrentCertKeyFingerprint Property (OfficeSigner Class)

Returns a fingerprint of the public key contained in the certificate.

Syntax

QByteArray GetCurrentCertKeyFingerprint();

Remarks

Returns a fingerprint of the public key contained in the certificate.

This property is read-only and not available at design time.

Data Type

Byte Array

CurrentCertKeyUsage Property (OfficeSigner Class)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

int GetCurrentCertKeyUsage();

Default Value

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:


ckuUnknown	`0x00000`	Unknown key usage
ckuDigitalSignature	`0x00001`	Digital signature
ckuNonRepudiation	`0x00002`	Non-repudiation
ckuKeyEncipherment	`0x00004`	Key encipherment
ckuDataEncipherment	`0x00008`	Data encipherment
ckuKeyAgreement	`0x00010`	Key agreement
ckuKeyCertSign	`0x00020`	Certificate signing
ckuCRLSign	`0x00040`	Revocation signing
ckuEncipherOnly	`0x00080`	Encipher only
ckuDecipherOnly	`0x00100`	Decipher only
ckuServerAuthentication	`0x00200`	Server authentication
ckuClientAuthentication	`0x00400`	Client authentication
ckuCodeSigning	`0x00800`	Code signing
ckuEmailProtection	`0x01000`	Email protection
ckuTimeStamping	`0x02000`	Timestamping
ckuOCSPSigning	`0x04000`	OCSP signing
ckuSmartCardLogon	`0x08000`	Smartcard logon
ckuKeyPurposeClientAuth	`0x10000`	Kerberos - client authentication
ckuKeyPurposeKDC	`0x20000`	Kerberos - KDC

This property is read-only and not available at design time.

Data Type

Integer

CurrentCertKeyValid Property (OfficeSigner Class)

Returns True if the certificate's key is cryptographically valid, and False otherwise.

Syntax

bool GetCurrentCertKeyValid();

Default Value

false

Remarks

Returns True if the certificate's key is cryptographically valid, and False otherwise.

This property is read-only and not available at design time.

Data Type

Boolean

CurrentCertOCSPLocations Property (OfficeSigner Class)

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

Syntax

QString GetCurrentCertOCSPLocations();

Default Value

Remarks

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

This property is read-only and not available at design time.

Data Type

String

CurrentCertOCSPNoCheck Property (OfficeSigner Class)

TBD.

Syntax

bool GetCurrentCertOCSPNoCheck();

Default Value

false

Remarks

TBD.

This property is read-only and not available at design time.

Data Type

Boolean

CurrentCertOrigin Property (OfficeSigner Class)

Returns the origin of this certificate.

Syntax

int GetCurrentCertOrigin();

Default Value

Remarks

Returns the origin of this certificate.

This property is read-only and not available at design time.

Data Type

Integer

CurrentCertPolicyIDs Property (OfficeSigner Class)

Contains identifiers (OIDs) of the applicable certificate policies.

Syntax

QString GetCurrentCertPolicyIDs();

Default Value

Remarks

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

This property is read-only and not available at design time.

Data Type

String

CurrentCertPrivateKeyBytes Property (OfficeSigner Class)

Contains the certificate's private key.

Syntax

QByteArray GetCurrentCertPrivateKeyBytes();

Remarks

Contains the certificate's private key. It is normal for this property to be empty if the private key is non-exportable.

This property is read-only and not available at design time.

Data Type

Byte Array

CurrentCertPrivateKeyExists Property (OfficeSigner Class)

Indicates whether the certificate has an associated private key.

Syntax

bool GetCurrentCertPrivateKeyExists();

Default Value

false

Remarks

Indicates whether the certificate has an associated private key.

This property is read-only and not available at design time.

Data Type

Boolean

CurrentCertPrivateKeyExtractable Property (OfficeSigner Class)

Indicates whether the private key is extractable.

Syntax

bool GetCurrentCertPrivateKeyExtractable();

Default Value

false

Remarks

Indicates whether the private key is extractable

This property is read-only and not available at design time.

Data Type

Boolean

CurrentCertPublicKeyBytes Property (OfficeSigner Class)

Contains the certificate's public key in DER format.

Syntax

QByteArray GetCurrentCertPublicKeyBytes();

Remarks

Contains the certificate's public key in DER format.

This property is read-only and not available at design time.

Data Type

Byte Array

CurrentCertQualifiedStatements Property (OfficeSigner Class)

TBD.

Syntax

int GetCurrentCertQualifiedStatements();

Possible Values

QST_NON_QUALIFIED(0), 
QST_QUALIFIED_HARDWARE(1), 
QST_QUALIFIED_SOFTWARE(2)

Default Value

Remarks

TBD

This property is read-only and not available at design time.

Data Type

Integer

CurrentCertSelfSigned Property (OfficeSigner Class)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

bool GetCurrentCertSelfSigned();

Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

This property is read-only and not available at design time.

Data Type

Boolean

CurrentCertSerialNumber Property (OfficeSigner Class)

Returns the certificate's serial number.

Syntax

QByteArray GetCurrentCertSerialNumber();

Remarks

Returns the certificate's serial number.

This property is read-only and not available at design time.

Data Type

Byte Array

CurrentCertSigAlgorithm Property (OfficeSigner Class)

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

QString GetCurrentCertSigAlgorithm();

Default Value

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

This property is read-only and not available at design time.

Data Type

String

CurrentCertSubject Property (OfficeSigner Class)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

QString GetCurrentCertSubject();

Default Value

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

This property is read-only and not available at design time.

Data Type

String

CurrentCertSubjectAlternativeName Property (OfficeSigner Class)

TBD.

Syntax

QString GetCurrentCertSubjectAlternativeName();

Default Value

Remarks

TBD.

This property is read-only and not available at design time.

Data Type

String

CurrentCertSubjectKeyID Property (OfficeSigner Class)

Contains a unique identifier (fingerprint) of the certificate's private key.

Syntax

QByteArray GetCurrentCertSubjectKeyID();

Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

This property is read-only and not available at design time.

Data Type

Byte Array

CurrentCertSubjectRDN Property (OfficeSigner Class)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Syntax

QString GetCurrentCertSubjectRDN();

Default Value

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

This property is read-only and not available at design time.

Data Type

String

CurrentCertValidFrom Property (OfficeSigner Class)

The time point at which the certificate becomes valid, in UTC.

Syntax

QString GetCurrentCertValidFrom();

Default Value

Remarks

The time point at which the certificate becomes valid, in UTC.

This property is read-only and not available at design time.

Data Type

String

CurrentCertValidTo Property (OfficeSigner Class)

The time point at which the certificate expires, in UTC.

Syntax

QString GetCurrentCertValidTo();

Default Value

Remarks

The time point at which the certificate expires, in UTC.

This property is read-only and not available at design time.

Data Type

String

DocumentFormat Property (OfficeSigner Class)

Defines the format of the Office document.

Syntax

int GetDocumentFormat();

Possible Values

ODF_UNKNOWN(0), 
ODF_BINARY(1), 
ODF_OPEN_XML(2), 
ODF_OPEN_XPS(3), 
ODF_OPEN_DOCUMENT(4)

Default Value

Remarks

This property contains the Office document format.


odfUnknown	`0`	Unknown document format
odfBinary	`1`	Binary Office document
odfOpenXML	`2`	OpenXML Office document
odfOpenXPS	`3`	OpenXPS document
odfOpenDocument	`4`	OpenOffice document

This property is read-only and not available at design time.

Data Type

Integer

EnableXAdES Property (OfficeSigner Class)

Specifies if an advanced signature (XAdES) will be produced.

Syntax

bool GetEnableXAdES();
int SetEnableXAdES(bool bEnableXAdES);

Default Value

false

Remarks

Use this property to specify that an advanced signature (XAdES) or XML-DSIG will be produced.

Data Type

Boolean

ExternalCryptoAsyncDocumentID Property (OfficeSigner Class)

Specifies the document ID for SignAsyncEnd() call Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch.

Syntax

QString GetExternalCryptoAsyncDocumentID();
int SetExternalCryptoAsyncDocumentID(QString qsExternalCryptoAsyncDocumentID);

Default Value

Remarks

Specifies the document ID for SignAsyncEnd() call

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. This value helps ASiCSigner identify the correct signature in the returned batch of responses. If using batched requests, make sure to set this property to the same value on both pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

Data Type

String

ExternalCryptoCustomParams Property (OfficeSigner Class)

Custom parameters to be passed to the signing service (uninterpreted).

Syntax

QString GetExternalCryptoCustomParams();
int SetExternalCryptoCustomParams(QString qsExternalCryptoCustomParams);

Default Value

Remarks

Custom parameters to be passed to the signing service (uninterpreted).

This property is not available at design time.

Data Type

String

ExternalCryptoData Property (OfficeSigner Class)

Additional data to be included in the async state and mirrored back by the requestor.

Syntax

QString GetExternalCryptoData();
int SetExternalCryptoData(QString qsExternalCryptoData);

Default Value

Remarks

Additional data to be included in the async state and mirrored back by the requestor

This property is not available at design time.

Data Type

String

ExternalCryptoExternalHashCalculation Property (OfficeSigner Class)

Specifies whether the message hash is to be calculated at the external endpoint.

Syntax

bool GetExternalCryptoExternalHashCalculation();
int SetExternalCryptoExternalHashCalculation(bool bExternalCryptoExternalHashCalculation);

Default Value

false

Remarks

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by all components. In particular, components operating with larger objects (PDFSigner, CAdESSigner, XAdESSigner) do not support it.

Data Type

Boolean

ExternalCryptoHashAlgorithm Property (OfficeSigner Class)

Specifies the request's signature hash algorithm.

Syntax

QString GetExternalCryptoHashAlgorithm();
int SetExternalCryptoHashAlgorithm(QString qsExternalCryptoHashAlgorithm);

Default Value

"SHA256"

Remarks

Specifies the request's signature hash algorithm.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

Data Type

String

ExternalCryptoKeyID Property (OfficeSigner Class)

The ID of the pre-shared key used for DC request authentication.

Syntax

QString GetExternalCryptoKeyID();
int SetExternalCryptoKeyID(QString qsExternalCryptoKeyID);

Default Value

Remarks

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides extra protection layer for the protocol and diminishes the risk of private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use ExternalCryptoKeySecret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

Data Type

String

ExternalCryptoKeySecret Property (OfficeSigner Class)

The pre-shared key used for DC request authentication.

Syntax

QString GetExternalCryptoKeySecret();
int SetExternalCryptoKeySecret(QString qsExternalCryptoKeySecret);

Default Value

Remarks

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the ExternalCryptoKeyID topic.

Data Type

String

ExternalCryptoMethod Property (OfficeSigner Class)

Specifies the asynchronous signing method.

Syntax

int GetExternalCryptoMethod();
int SetExternalCryptoMethod(int iExternalCryptoMethod);

Possible Values

ASMD_PKCS1(0), 
ASMD_PKCS7(1)

Default Value

Remarks

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:


asmdPKCS1	`0`
asmdPKCS7	`1`

Data Type

Integer

ExternalCryptoMode Property (OfficeSigner Class)

Specifies the external cryptography mode.

Syntax

int GetExternalCryptoMode();
int SetExternalCryptoMode(int iExternalCryptoMode);

Possible Values

ECM_DEFAULT(0), 
ECM_DISABLED(1), 
ECM_GENERIC(2), 
ECM_DCAUTH(3), 
ECM_DCAUTH_JSON(4)

Default Value

Remarks

Specifies the external cryptography mode.

Available options:


ecmDefault	The default value (`0`)
ecmDisabled	Do not use DC or external signing (`1`)
ecmGeneric	Generic external signing with OnExternalSign event (`2`)
ecmDCAuth	DCAuth signing (`3`)
ecmDCAuthJSON	DCAuth signing in JSON format (`4`)

This property is not available at design time.

Data Type

Integer

ExternalCryptoPublicKeyAlgorithm Property (OfficeSigner Class)

Provide public key algorithm here if the certificate is not available on the pre-signing stage.

Syntax

QString GetExternalCryptoPublicKeyAlgorithm();
int SetExternalCryptoPublicKeyAlgorithm(QString qsExternalCryptoPublicKeyAlgorithm);

Default Value

Remarks

Provide public key algorithm here if the certificate is not available on the pre-signing stage.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

Data Type

String

FIPSMode Property (OfficeSigner Class)

Reserved.

Syntax

bool GetFIPSMode();
int SetFIPSMode(bool bFIPSMode);

Default Value

false

Remarks

This property is reserved for future use.

Data Type

Boolean

HashAlgorithm Property (OfficeSigner Class)

Specifies the hash algorithm to be used.

Syntax

QString GetHashAlgorithm();
int SetHashAlgorithm(QString qsHashAlgorithm);

Default Value

"SHA256"

Remarks

Use this property to set the hash algorithm for signature calculation.

Supported values:


SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`

Data Type

String

IgnoreChainValidationErrors Property (OfficeSigner Class)

Makes the class tolerant to chain validation errors.

Syntax

bool GetIgnoreChainValidationErrors();
int SetIgnoreChainValidationErrors(bool bIgnoreChainValidationErrors);

Default Value

false

Remarks

If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.

Data Type

Boolean

InputBytes Property (OfficeSigner Class)

Use this property to pass the input to class in the byte array form.

Syntax

QByteArray GetInputBytes();
int SetInputBytes(QByteArray qbaInputBytes);

Remarks

Assign a byte array containing the data to be processed to this property.

This property is not available at design time.

Data Type

Byte Array

InputFile Property (OfficeSigner Class)

The file to be signed.

Syntax

QString GetInputFile();
int SetInputFile(QString qsInputFile);

Default Value

Remarks

Provide the path to the Office document to be signed.

Data Type

String

InterimValidationDetails Property (OfficeSigner Class)

Contains the validation details of the moment.

Syntax

int GetInterimValidationDetails();
int SetInterimValidationDetails(int iInterimValidationDetails);

Default Value

Remarks

Over the course of the validation process, the validator maintains an interim validity status for the chain that is being processed. This status is influenced by every single step of the validation routine, and may change along the way, before the end of the chain is reached and the final validation conclusion is drawn.

Use this property to check the interim validity details mid-flight.

The value of this property is a bit mask of the following options:


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

This property is not available at design time.

Data Type

Integer

InterimValidationResult Property (OfficeSigner Class)

Contains the validation status of the moment.

Syntax

int GetInterimValidationResult();
int SetInterimValidationResult(int iInterimValidationResult);

Possible Values

CVT_VALID(0), 
CVT_VALID_BUT_UNTRUSTED(1), 
CVT_INVALID(2), 
CVT_CANT_BE_ESTABLISHED(3)

Default Value

Remarks

Use this property to check the interim validity status mid-flight.


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

This property is not available at design time.

Data Type

Integer

KnownCertCount Property (OfficeSigner Class)

The number of records in the KnownCert arrays.

Syntax

int GetKnownCertCount();
int SetKnownCertCount(int iKnownCertCount);

Default Value

Remarks

This property controls the size of the following arrays:

KnownCertBytes
KnownCertHandle

The array indices start at 0 and end at KnownCertCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCertBytes Property (OfficeSigner Class)

Returns raw certificate data in DER format.

Syntax

QByteArray GetKnownCertBytes(int iKnownCertIndex);

Remarks

Returns raw certificate data in DER format.

The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCertHandle Property (OfficeSigner Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

qint64 GetKnownCertHandle(int iKnownCertIndex);
int SetKnownCertHandle(int iKnownCertIndex, qint64 lKnownCertHandle);

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is not available at design time.

Data Type

Long64

KnownCRLCount Property (OfficeSigner Class)

The number of records in the KnownCRL arrays.

Syntax

int GetKnownCRLCount();
int SetKnownCRLCount(int iKnownCRLCount);

Default Value

Remarks

This property controls the size of the following arrays:

KnownCRLBytes
KnownCRLHandle

The array indices start at 0 and end at KnownCRLCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCRLBytes Property (OfficeSigner Class)

Returns raw CRL data in DER format.

Syntax

QByteArray GetKnownCRLBytes(int iKnownCRLIndex);

Remarks

Returns raw CRL data in DER format.

The KnownCRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCRLHandle Property (OfficeSigner Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

qint64 GetKnownCRLHandle(int iKnownCRLIndex);
int SetKnownCRLHandle(int iKnownCRLIndex, qint64 lKnownCRLHandle);

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The KnownCRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is not available at design time.

Data Type

Long64

KnownOCSPCount Property (OfficeSigner Class)

The number of records in the KnownOCSP arrays.

Syntax

int GetKnownOCSPCount();
int SetKnownOCSPCount(int iKnownOCSPCount);

Default Value

Remarks

This property controls the size of the following arrays:

KnownOCSPBytes
KnownOCSPHandle

The array indices start at 0 and end at KnownOCSPCount - 1.

This property is not available at design time.

Data Type

Integer

KnownOCSPBytes Property (OfficeSigner Class)

Buffer containing raw OCSP response data.

Syntax

QByteArray GetKnownOCSPBytes(int iKnownOCSPIndex);

Remarks

Buffer containing raw OCSP response data.

The KnownOCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownOCSPHandle Property (OfficeSigner Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

qint64 GetKnownOCSPHandle(int iKnownOCSPIndex);
int SetKnownOCSPHandle(int iKnownOCSPIndex, qint64 lKnownOCSPHandle);

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The KnownOCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is not available at design time.

Data Type

Long64

OfflineMode Property (OfficeSigner Class)

Switches the class to the offline mode.

Syntax

bool GetOfflineMode();
int SetOfflineMode(bool bOfflineMode);

Default Value

false

Remarks

When working in offline mode, the component restricts itself from using any online revocation information sources, such as CRL or OCSP responders.

Offline mode may be useful if there is a need to verify the completeness of validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.

Data Type

Boolean

OutputBytes Property (OfficeSigner Class)

Use this property to read the output the class object has produced.

Syntax

QByteArray GetOutputBytes();

Remarks

Read the contents of this property after the operation is completed to read the produced output. This property will only be set if OutputFile and OutputStream properties had not been assigned.

This property is read-only and not available at design time.

Data Type

Byte Array

OutputFile Property (OfficeSigner Class)

Defines where to save the signed document.

Syntax

QString GetOutputFile();
int SetOutputFile(QString qsOutputFile);

Default Value

Remarks

Specifies the path where the signed Office document should be saved.

Data Type

String

Profile Property (OfficeSigner Class)

Specifies a pre-defined profile to apply when creating the signature.

Syntax

QString GetProfile();
int SetProfile(QString qsProfile);

Default Value

Remarks

Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile.

Data Type

String

ProxyAddress Property (OfficeSigner Class)

The IP address of the proxy server.

Syntax

QString GetProxyAddress();
int SetProxyAddress(QString qsProxyAddress);

Default Value

Remarks

The IP address of the proxy server.

Data Type

String

ProxyAuthentication Property (OfficeSigner Class)

The authentication type used by the proxy server.

Syntax

int GetProxyAuthentication();
int SetProxyAuthentication(int iProxyAuthentication);

Possible Values

PAT_NO_AUTHENTICATION(0), 
PAT_BASIC(1), 
PAT_DIGEST(2), 
PAT_NTLM(3)

Default Value

Remarks

The authentication type used by the proxy server.


patNoAuthentication	`0`
patBasic	`1`
patDigest	`2`
patNTLM	`3`

Data Type

Integer

ProxyPassword Property (OfficeSigner Class)

The password to authenticate to the proxy server.

Syntax

QString GetProxyPassword();
int SetProxyPassword(QString qsProxyPassword);

Default Value

Remarks

The password to authenticate to the proxy server.

Data Type

String

ProxyPort Property (OfficeSigner Class)

The port on the proxy server to connect to.

Syntax

int GetProxyPort();
int SetProxyPort(int iProxyPort);

Default Value

Remarks

The port on the proxy server to connect to.

Data Type

Integer

ProxyProxyType Property (OfficeSigner Class)

The type of the proxy server.

Syntax

int GetProxyProxyType();
int SetProxyProxyType(int iProxyProxyType);

Possible Values

CPT_NONE(0), 
CPT_SOCKS_4(1), 
CPT_SOCKS_5(2), 
CPT_WEB_TUNNEL(3), 
CPT_HTTP(4)

Default Value

Remarks

The type of the proxy server.

The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.


cptNone	`0`
cptSocks4	`1`
cptSocks5	`2`
cptWebTunnel	`3`
cptHTTP	`4`

Data Type

Integer

ProxyRequestHeaders Property (OfficeSigner Class)

Contains HTTP request headers for WebTunnel and HTTP proxy.

Syntax

QString GetProxyRequestHeaders();
int SetProxyRequestHeaders(QString qsProxyRequestHeaders);

Default Value

Remarks

Contains HTTP request headers for WebTunnel and HTTP proxy.

Data Type

String

ProxyResponseBody Property (OfficeSigner Class)

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Syntax

QString GetProxyResponseBody();
int SetProxyResponseBody(QString qsProxyResponseBody);

Default Value

Remarks

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Data Type

String

ProxyResponseHeaders Property (OfficeSigner Class)

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Syntax

QString GetProxyResponseHeaders();
int SetProxyResponseHeaders(QString qsProxyResponseHeaders);

Default Value

Remarks

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Data Type

String

ProxyUseIPv6 Property (OfficeSigner Class)

Specifies whether IPv6 should be used when connecting through the proxy.

Syntax

bool GetProxyUseIPv6();
int SetProxyUseIPv6(bool bProxyUseIPv6);

Default Value

false

Remarks

Specifies whether IPv6 should be used when connecting through the proxy.

Data Type

Boolean

ProxyUseProxy Property (OfficeSigner Class)

Enables or disables proxy-driven connection.

Syntax

bool GetProxyUseProxy();
int SetProxyUseProxy(bool bProxyUseProxy);

Default Value

false

Remarks

Enables or disables proxy-driven connection.

Data Type

Boolean

ProxyUsername Property (OfficeSigner Class)

Specifies the username credential for proxy authentication.

Syntax

QString GetProxyUsername();
int SetProxyUsername(QString qsProxyUsername);

Default Value

Remarks

Specifies the username credential for proxy authentication.

Data Type

String

RevocationCheck Property (OfficeSigner Class)

Specifies the kind(s) of revocation check to perform.

Syntax

int GetRevocationCheck();
int SetRevocationCheck(int iRevocationCheck);

Possible Values

CRC_NONE(0), 
CRC_AUTO(1), 
CRC_ALL_CRL(2), 
CRC_ALL_OCSP(3), 
CRC_ALL_CRLAND_OCSP(4), 
CRC_ANY_CRL(5), 
CRC_ANY_OCSP(6), 
CRC_ANY_CRLOR_OCSP(7), 
CRC_ANY_OCSPOR_CRL(8)

Default Value

Remarks

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

Certificate Revocation Lists (CRL) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.


crcNone (`0`)	No revocation checking
crcAuto (`1`)	Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL (`2`)	Check all provided CRL endpoints for all chain certificates.
crcAllOCSP (`3`)	Check all provided OCSP endpoints for all chain certificates.
crcAllCRLAndOCSP (`4`)	Check all CRL and OCSP endpoints for all chain certificates.
crcAnyCRL (`5`)	At least one CRL check for every certificate in the chain must succeed.
crcAnyOCSP (`6`)	At least one OCSP check for every certificate in the chain must succeed.
crcAnyCRLOrOCSP (`7`)	At least one CRL or OCSP check for every certificate in the chain must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL (`8`)	At least one CRL or OCSP check for every certificate in the chain must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to faster OCSP route and only demand one source to succeed) is a good choice for most of typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Data Type

Integer

SignatureIndex Property (OfficeSigner Class)

The index of the signature to update.

Syntax

int GetSignatureIndex();
int SetSignatureIndex(int iSignatureIndex);

Default Value

Remarks

Use this property to specify the index of the existing signature before timestamping or adding validation info.

Data Type

Integer

SignatureType Property (OfficeSigner Class)

Specifies the type of the signature to be made.

Syntax

int GetSignatureType();
int SetSignatureType(int iSignatureType);

Possible Values

OST_DEFAULT(0), 
OST_BINARY_CRYPTO_API(1), 
OST_BINARY_XML(2), 
OST_OPEN_XML(3), 
OST_OPEN_XPS(4), 
OST_OPEN_DOCUMENT(5)

Default Value

Remarks

Use this property to define what kind of signature should be made over the document.


ostDefault	`0`
ostBinaryCryptoAPI	`1`
ostBinaryXML	`2`
ostOpenXML	`3`
ostOpenXPS	`4`
ostOpenDocument	`5`

Data Type

Integer

SignCoreProperties Property (OfficeSigner Class)

Whether to sign the core properties of the document.

Syntax

bool GetSignCoreProperties();
int SetSignCoreProperties(bool bSignCoreProperties);

Default Value

false

Remarks

The core properties are a set of elements that describe common and well-known properties of the Office document package such as creator, version, revision, etc.

Data Type

Boolean

SignDocument Property (OfficeSigner Class)

Whether to sign the document itself.

Syntax

bool GetSignDocument();
int SetSignDocument(bool bSignDocument);

Default Value

true

Remarks

Use this property to specify whether the signature should be computed over the document itself.

Data Type

Boolean

SigningCertBytes Property (OfficeSigner Class)

Returns raw certificate data in DER format.

Syntax

QByteArray GetSigningCertBytes();

Remarks

Returns raw certificate data in DER format.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningCertHandle Property (OfficeSigner Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

qint64 GetSigningCertHandle();
int SetSigningCertHandle(qint64 lSigningCertHandle);

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

This property is not available at design time.

Data Type

Long64

SigningChainCount Property (OfficeSigner Class)

The number of records in the SigningChain arrays.

Syntax

int GetSigningChainCount();
int SetSigningChainCount(int iSigningChainCount);

Default Value

Remarks

This property controls the size of the following arrays:

SigningChainBytes
SigningChainHandle

The array indices start at 0 and end at SigningChainCount - 1.

This property is not available at design time.

Data Type

Integer

SigningChainBytes Property (OfficeSigner Class)

Returns raw certificate data in DER format.

Syntax

QByteArray GetSigningChainBytes(int iSigningChainIndex);

Remarks

Returns raw certificate data in DER format.

The SigningChainIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SigningChainCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningChainHandle Property (OfficeSigner Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

qint64 GetSigningChainHandle(int iSigningChainIndex);
int SetSigningChainHandle(int iSigningChainIndex, qint64 lSigningChainHandle);

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The SigningChainIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SigningChainCount property.

This property is not available at design time.

Data Type

Long64

SignSignatureOrigin Property (OfficeSigner Class)

Whether to sign the signature origin.

Syntax

bool GetSignSignatureOrigin();
int SetSignSignatureOrigin(bool bSignSignatureOrigin);

Default Value

false

Remarks

Specifies whether to sign the XPS document's signature origin.

Data Type

Boolean

SocketDNSMode Property (OfficeSigner Class)

Selects the DNS resolver to use: the class's (secure) built-in one, or the one provided by the system.

Syntax

int GetSocketDNSMode();
int SetSocketDNSMode(int iSocketDNSMode);

Possible Values

DM_AUTO(0), 
DM_PLATFORM(1), 
DM_OWN(2), 
DM_OWN_SECURE(3)

Default Value

Remarks

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.


dmAuto	`0`
dmPlatform	`1`
dmOwn	`2`
dmOwnSecure	`3`

Data Type

Integer

SocketDNSPort Property (OfficeSigner Class)

Specifies the port number to be used for sending queries to the DNS server.

Syntax

int GetSocketDNSPort();
int SetSocketDNSPort(int iSocketDNSPort);

Default Value

Remarks

Specifies the port number to be used for sending queries to the DNS server.

Data Type

Integer

SocketDNSQueryTimeout Property (OfficeSigner Class)

The timeout (in milliseconds) for each DNS query.

Syntax

int GetSocketDNSQueryTimeout();
int SetSocketDNSQueryTimeout(int iSocketDNSQueryTimeout);

Default Value

Remarks

The timeout (in milliseconds) for each DNS query. The value of 0 indicates the infinite timeout.

Data Type

Integer

SocketDNSServers Property (OfficeSigner Class)

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Syntax

QString GetSocketDNSServers();
int SetSocketDNSServers(QString qsSocketDNSServers);

Default Value

Remarks

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Data Type

String

SocketDNSTotalTimeout Property (OfficeSigner Class)

The timeout (in milliseconds) for the whole resolution process.

Syntax

int GetSocketDNSTotalTimeout();
int SetSocketDNSTotalTimeout(int iSocketDNSTotalTimeout);

Default Value

Remarks

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates the infinite timeout.

Data Type

Integer

SocketIncomingSpeedLimit Property (OfficeSigner Class)

The maximum number of bytes to read from the socket, per second.

Syntax

int GetSocketIncomingSpeedLimit();
int SetSocketIncomingSpeedLimit(int iSocketIncomingSpeedLimit);

Default Value

Remarks

The maximum number of bytes to read from the socket, per second.

Data Type

Integer

SocketLocalAddress Property (OfficeSigner Class)

The local network interface to bind the socket to.

Syntax

QString GetSocketLocalAddress();
int SetSocketLocalAddress(QString qsSocketLocalAddress);

Default Value

Remarks

The local network interface to bind the socket to.

Data Type

String

SocketLocalPort Property (OfficeSigner Class)

The local port number to bind the socket to.

Syntax

int GetSocketLocalPort();
int SetSocketLocalPort(int iSocketLocalPort);

Default Value

Remarks

The local port number to bind the socket to.

Data Type

Integer

SocketOutgoingSpeedLimit Property (OfficeSigner Class)

The maximum number of bytes to write to the socket, per second.

Syntax

int GetSocketOutgoingSpeedLimit();
int SetSocketOutgoingSpeedLimit(int iSocketOutgoingSpeedLimit);

Default Value

Remarks

The maximum number of bytes to write to the socket, per second.

Data Type

Integer

SocketTimeout Property (OfficeSigner Class)

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Syntax

int GetSocketTimeout();
int SetSocketTimeout(int iSocketTimeout);

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

Data Type

Integer

SocketUseIPv6 Property (OfficeSigner Class)

Enables or disables IP protocol version 6.

Syntax

bool GetSocketUseIPv6();
int SetSocketUseIPv6(bool bSocketUseIPv6);

Default Value

false

Remarks

Enables or disables IP protocol version 6.

Data Type

Boolean

TimestampServer Property (OfficeSigner Class)

The address of the timestamping server.

Syntax

QString GetTimestampServer();
int SetTimestampServer(QString qsTimestampServer);

Default Value

Remarks

Use this property to set the address of the TSA (Time Stamping Authority) server which should be used for timestamping the signature.

Data Type

String

TLSClientCertCount Property (OfficeSigner Class)

The number of records in the TLSClientCert arrays.

Syntax

int GetTLSClientCertCount();
int SetTLSClientCertCount(int iTLSClientCertCount);

Default Value

Remarks

This property controls the size of the following arrays:

TLSClientCertBytes
TLSClientCertHandle

The array indices start at 0 and end at TLSClientCertCount - 1.

This property is not available at design time.

Data Type

Integer

TLSClientCertBytes Property (OfficeSigner Class)

Returns raw certificate data in DER format.

Syntax

QByteArray GetTLSClientCertBytes(int iTLSClientCertIndex);

Remarks

Returns raw certificate data in DER format.

The TLSClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSClientCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TLSClientCertHandle Property (OfficeSigner Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

qint64 GetTLSClientCertHandle(int iTLSClientCertIndex);
int SetTLSClientCertHandle(int iTLSClientCertIndex, qint64 lTLSClientCertHandle);

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The TLSClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSClientCertCount property.

This property is not available at design time.

Data Type

Long64

TLSServerCertCount Property (OfficeSigner Class)

The number of records in the TLSServerCert arrays.

Syntax

int GetTLSServerCertCount();

Default Value

Remarks

This property controls the size of the following arrays:

TLSServerCertBytes
TLSServerCertHandle

The array indices start at 0 and end at TLSServerCertCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

TLSServerCertBytes Property (OfficeSigner Class)

Returns raw certificate data in DER format.

Syntax

QByteArray GetTLSServerCertBytes(int iTLSServerCertIndex);

Remarks

Returns raw certificate data in DER format.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TLSServerCertHandle Property (OfficeSigner Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

qint64 GetTLSServerCertHandle(int iTLSServerCertIndex);

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

Long64

TLSAutoValidateCertificates Property (OfficeSigner Class)

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Syntax

bool GetTLSAutoValidateCertificates();
int SetTLSAutoValidateCertificates(bool bTLSAutoValidateCertificates);

Default Value

true

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Data Type

Boolean

TLSBaseConfiguration Property (OfficeSigner Class)

Selects the base configuration for the TLS settings.

Syntax

int GetTLSBaseConfiguration();
int SetTLSBaseConfiguration(int iTLSBaseConfiguration);

Possible Values

STPC_DEFAULT(0), 
STPC_COMPATIBLE(1), 
STPC_COMPREHENSIVE_INSECURE(2), 
STPC_HIGHLY_SECURE(3)

Default Value

Remarks

Selects the base configuration for the TLS settings. Several profiles are on offer, tuned up for different purposes, such as high security or higher compatibility.


stpcDefault	`0`
stpcCompatible	`1`
stpcComprehensiveInsecure	`2`
stpcHighlySecure	`3`

Data Type

Integer

TLSCiphersuites Property (OfficeSigner Class)

A list of ciphersuites separated with commas or semicolons.

Syntax

QString GetTLSCiphersuites();
int SetTLSCiphersuites(QString qsTLSCiphersuites);

Default Value

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases that allow to blanketly enable or disable all ciphersuites at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by BaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

NULL_NULL_NULL
RSA_NULL_MD5
RSA_NULL_SHA
RSA_RC4_MD5
RSA_RC4_SHA
RSA_RC2_MD5
RSA_IDEA_MD5
RSA_IDEA_SHA
RSA_DES_MD5
RSA_DES_SHA
RSA_3DES_MD5
RSA_3DES_SHA
RSA_AES128_SHA
RSA_AES256_SHA
DH_DSS_DES_SHA
DH_DSS_3DES_SHA
DH_DSS_AES128_SHA
DH_DSS_AES256_SHA
DH_RSA_DES_SHA
DH_RSA_3DES_SHA
DH_RSA_AES128_SHA
DH_RSA_AES256_SHA
DHE_DSS_DES_SHA
DHE_DSS_3DES_SHA
DHE_DSS_AES128_SHA
DHE_DSS_AES256_SHA
DHE_RSA_DES_SHA
DHE_RSA_3DES_SHA
DHE_RSA_AES128_SHA
DHE_RSA_AES256_SHA
DH_ANON_RC4_MD5
DH_ANON_DES_SHA
DH_ANON_3DES_SHA
DH_ANON_AES128_SHA
DH_ANON_AES256_SHA
RSA_RC2_MD5_EXPORT
RSA_RC4_MD5_EXPORT
RSA_DES_SHA_EXPORT
DH_DSS_DES_SHA_EXPORT
DH_RSA_DES_SHA_EXPORT
DHE_DSS_DES_SHA_EXPORT
DHE_RSA_DES_SHA_EXPORT
DH_ANON_RC4_MD5_EXPORT
DH_ANON_DES_SHA_EXPORT
RSA_CAMELLIA128_SHA
DH_DSS_CAMELLIA128_SHA
DH_RSA_CAMELLIA128_SHA
DHE_DSS_CAMELLIA128_SHA
DHE_RSA_CAMELLIA128_SHA
DH_ANON_CAMELLIA128_SHA
RSA_CAMELLIA256_SHA
DH_DSS_CAMELLIA256_SHA
DH_RSA_CAMELLIA256_SHA
DHE_DSS_CAMELLIA256_SHA
DHE_RSA_CAMELLIA256_SHA
DH_ANON_CAMELLIA256_SHA
PSK_RC4_SHA
PSK_3DES_SHA
PSK_AES128_SHA
PSK_AES256_SHA
DHE_PSK_RC4_SHA
DHE_PSK_3DES_SHA
DHE_PSK_AES128_SHA
DHE_PSK_AES256_SHA
RSA_PSK_RC4_SHA
RSA_PSK_3DES_SHA
RSA_PSK_AES128_SHA
RSA_PSK_AES256_SHA
RSA_SEED_SHA
DH_DSS_SEED_SHA
DH_RSA_SEED_SHA
DHE_DSS_SEED_SHA
DHE_RSA_SEED_SHA
DH_ANON_SEED_SHA
SRP_SHA_3DES_SHA
SRP_SHA_RSA_3DES_SHA
SRP_SHA_DSS_3DES_SHA
SRP_SHA_AES128_SHA
SRP_SHA_RSA_AES128_SHA
SRP_SHA_DSS_AES128_SHA
SRP_SHA_AES256_SHA
SRP_SHA_RSA_AES256_SHA
SRP_SHA_DSS_AES256_SHA
ECDH_ECDSA_NULL_SHA
ECDH_ECDSA_RC4_SHA
ECDH_ECDSA_3DES_SHA
ECDH_ECDSA_AES128_SHA
ECDH_ECDSA_AES256_SHA
ECDHE_ECDSA_NULL_SHA
ECDHE_ECDSA_RC4_SHA
ECDHE_ECDSA_3DES_SHA
ECDHE_ECDSA_AES128_SHA
ECDHE_ECDSA_AES256_SHA
ECDH_RSA_NULL_SHA
ECDH_RSA_RC4_SHA
ECDH_RSA_3DES_SHA
ECDH_RSA_AES128_SHA
ECDH_RSA_AES256_SHA
ECDHE_RSA_NULL_SHA
ECDHE_RSA_RC4_SHA
ECDHE_RSA_3DES_SHA
ECDHE_RSA_AES128_SHA
ECDHE_RSA_AES256_SHA
ECDH_ANON_NULL_SHA
ECDH_ANON_RC4_SHA
ECDH_ANON_3DES_SHA
ECDH_ANON_AES128_SHA
ECDH_ANON_AES256_SHA
RSA_NULL_SHA256
RSA_AES128_SHA256
RSA_AES256_SHA256
DH_DSS_AES128_SHA256
DH_RSA_AES128_SHA256
DHE_DSS_AES128_SHA256
DHE_RSA_AES128_SHA256
DH_DSS_AES256_SHA256
DH_RSA_AES256_SHA256
DHE_DSS_AES256_SHA256
DHE_RSA_AES256_SHA256
DH_ANON_AES128_SHA256
DH_ANON_AES256_SHA256
RSA_AES128_GCM_SHA256
RSA_AES256_GCM_SHA384
DHE_RSA_AES128_GCM_SHA256
DHE_RSA_AES256_GCM_SHA384
DH_RSA_AES128_GCM_SHA256
DH_RSA_AES256_GCM_SHA384
DHE_DSS_AES128_GCM_SHA256
DHE_DSS_AES256_GCM_SHA384
DH_DSS_AES128_GCM_SHA256
DH_DSS_AES256_GCM_SHA384
DH_ANON_AES128_GCM_SHA256
DH_ANON_AES256_GCM_SHA384
ECDHE_ECDSA_AES128_SHA256
ECDHE_ECDSA_AES256_SHA384
ECDH_ECDSA_AES128_SHA256
ECDH_ECDSA_AES256_SHA384
ECDHE_RSA_AES128_SHA256
ECDHE_RSA_AES256_SHA384
ECDH_RSA_AES128_SHA256
ECDH_RSA_AES256_SHA384
ECDHE_ECDSA_AES128_GCM_SHA256
ECDHE_ECDSA_AES256_GCM_SHA384
ECDH_ECDSA_AES128_GCM_SHA256
ECDH_ECDSA_AES256_GCM_SHA384
ECDHE_RSA_AES128_GCM_SHA256
ECDHE_RSA_AES256_GCM_SHA384
ECDH_RSA_AES128_GCM_SHA256
ECDH_RSA_AES256_GCM_SHA384
PSK_AES128_GCM_SHA256
PSK_AES256_GCM_SHA384
DHE_PSK_AES128_GCM_SHA256
DHE_PSK_AES256_GCM_SHA384
RSA_PSK_AES128_GCM_SHA256
RSA_PSK_AES256_GCM_SHA384
PSK_AES128_SHA256
PSK_AES256_SHA384
PSK_NULL_SHA256
PSK_NULL_SHA384
DHE_PSK_AES128_SHA256
DHE_PSK_AES256_SHA384
DHE_PSK_NULL_SHA256
DHE_PSK_NULL_SHA384
RSA_PSK_AES128_SHA256
RSA_PSK_AES256_SHA384
RSA_PSK_NULL_SHA256
RSA_PSK_NULL_SHA384
RSA_CAMELLIA128_SHA256
DH_DSS_CAMELLIA128_SHA256
DH_RSA_CAMELLIA128_SHA256
DHE_DSS_CAMELLIA128_SHA256
DHE_RSA_CAMELLIA128_SHA256
DH_ANON_CAMELLIA128_SHA256
RSA_CAMELLIA256_SHA256
DH_DSS_CAMELLIA256_SHA256
DH_RSA_CAMELLIA256_SHA256
DHE_DSS_CAMELLIA256_SHA256
DHE_RSA_CAMELLIA256_SHA256
DH_ANON_CAMELLIA256_SHA256
ECDHE_ECDSA_CAMELLIA128_SHA256
ECDHE_ECDSA_CAMELLIA256_SHA384
ECDH_ECDSA_CAMELLIA128_SHA256
ECDH_ECDSA_CAMELLIA256_SHA384
ECDHE_RSA_CAMELLIA128_SHA256
ECDHE_RSA_CAMELLIA256_SHA384
ECDH_RSA_CAMELLIA128_SHA256
ECDH_RSA_CAMELLIA256_SHA384
RSA_CAMELLIA128_GCM_SHA256
RSA_CAMELLIA256_GCM_SHA384
DHE_RSA_CAMELLIA128_GCM_SHA256
DHE_RSA_CAMELLIA256_GCM_SHA384
DH_RSA_CAMELLIA128_GCM_SHA256
DH_RSA_CAMELLIA256_GCM_SHA384
DHE_DSS_CAMELLIA128_GCM_SHA256
DHE_DSS_CAMELLIA256_GCM_SHA384
DH_DSS_CAMELLIA128_GCM_SHA256
DH_DSS_CAMELLIA256_GCM_SHA384
DH_anon_CAMELLIA128_GCM_SHA256
DH_anon_CAMELLIA256_GCM_SHA384
ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
ECDH_ECDSA_CAMELLIA128_GCM_SHA256
ECDH_ECDSA_CAMELLIA256_GCM_SHA384
ECDHE_RSA_CAMELLIA128_GCM_SHA256
ECDHE_RSA_CAMELLIA256_GCM_SHA384
ECDH_RSA_CAMELLIA128_GCM_SHA256
ECDH_RSA_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_GCM_SHA256
PSK_CAMELLIA256_GCM_SHA384
DHE_PSK_CAMELLIA128_GCM_SHA256
DHE_PSK_CAMELLIA256_GCM_SHA384
RSA_PSK_CAMELLIA128_GCM_SHA256
RSA_PSK_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_SHA256
PSK_CAMELLIA256_SHA384
DHE_PSK_CAMELLIA128_SHA256
DHE_PSK_CAMELLIA256_SHA384
RSA_PSK_CAMELLIA128_SHA256
RSA_PSK_CAMELLIA256_SHA384
ECDHE_PSK_CAMELLIA128_SHA256
ECDHE_PSK_CAMELLIA256_SHA384
ECDHE_PSK_RC4_SHA
ECDHE_PSK_3DES_SHA
ECDHE_PSK_AES128_SHA
ECDHE_PSK_AES256_SHA
ECDHE_PSK_AES128_SHA256
ECDHE_PSK_AES256_SHA384
ECDHE_PSK_NULL_SHA
ECDHE_PSK_NULL_SHA256
ECDHE_PSK_NULL_SHA384
ECDHE_RSA_CHACHA20_POLY1305_SHA256
ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
DHE_RSA_CHACHA20_POLY1305_SHA256
PSK_CHACHA20_POLY1305_SHA256
ECDHE_PSK_CHACHA20_POLY1305_SHA256
DHE_PSK_CHACHA20_POLY1305_SHA256
RSA_PSK_CHACHA20_POLY1305_SHA256
AES128_GCM_SHA256
AES256_GCM_SHA384
CHACHA20_POLY1305_SHA256
AES128_CCM_SHA256
AES128_CCM8_SHA256

Data Type

String

TLSECCurves Property (OfficeSigner Class)

Defines the elliptic curves to enable.

Syntax

QString GetTLSECCurves();
int SetTLSECCurves(QString qsTLSECCurves);

Default Value

Remarks

Defines the elliptic curves to enable.

Data Type

String

TLSExtensions Property (OfficeSigner Class)

Provides access to TLS extensions.

Syntax

QString GetTLSExtensions();
int SetTLSExtensions(QString qsTLSExtensions);

Default Value

Remarks

Provides access to TLS extensions.

Data Type

String

TLSForceResumeIfDestinationChanges Property (OfficeSigner Class)

Whether to force TLS session resumption when the destination address changes.

Syntax

bool GetTLSForceResumeIfDestinationChanges();
int SetTLSForceResumeIfDestinationChanges(bool bTLSForceResumeIfDestinationChanges);

Default Value

false

Remarks

Whether to force TLS session resumption when the destination address changes.

Data Type

Boolean

TLSPreSharedIdentity Property (OfficeSigner Class)

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

QString GetTLSPreSharedIdentity();
int SetTLSPreSharedIdentity(QString qsTLSPreSharedIdentity);

Default Value

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

This property is not available at design time.

Data Type

String

TLSPreSharedKey Property (OfficeSigner Class)

Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Syntax

QString GetTLSPreSharedKey();
int SetTLSPreSharedKey(QString qsTLSPreSharedKey);

Default Value

Remarks

Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

This property is not available at design time.

Data Type

String

TLSPreSharedKeyCiphersuite Property (OfficeSigner Class)

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Syntax

QString GetTLSPreSharedKeyCiphersuite();
int SetTLSPreSharedKeyCiphersuite(QString qsTLSPreSharedKeyCiphersuite);

Default Value

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Data Type

String

TLSRenegotiationAttackPreventionMode Property (OfficeSigner Class)

Selects renegotiation attack prevention mechanism.

Syntax

int GetTLSRenegotiationAttackPreventionMode();
int SetTLSRenegotiationAttackPreventionMode(int iTLSRenegotiationAttackPreventionMode);

Possible Values

CRAPM_COMPATIBLE(0), 
CRAPM_STRICT(1), 
CRAPM_AUTO(2)

Default Value

Remarks

Selects renegotiation attack prevention mechanism.

The following options are available:


crapmCompatible	`0`	TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict	`1`	Renegotiation attack prevention is enabled and enforced.
crapmAuto	`2`	Automatically choose whether to enable or disable renegotiation attack prevention.

Data Type

Integer

TLSRevocationCheck Property (OfficeSigner Class)

Specifies the kind(s) of revocation check to perform.

Syntax

int GetTLSRevocationCheck();
int SetTLSRevocationCheck(int iTLSRevocationCheck);

Possible Values

CRC_NONE(0), 
CRC_AUTO(1), 
CRC_ALL_CRL(2), 
CRC_ALL_OCSP(3), 
CRC_ALL_CRLAND_OCSP(4), 
CRC_ANY_CRL(5), 
CRC_ANY_OCSP(6), 
CRC_ANY_CRLOR_OCSP(7), 
CRC_ANY_OCSPOR_CRL(8)

Default Value

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.


crcNone (`0`)	No revocation checking
crcAuto (`1`)	Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL (`2`)	Check all provided CRL endpoints for all chain certificates.
crcAllOCSP (`3`)	Check all provided OCSP endpoints for all chain certificates.
crcAllCRLAndOCSP (`4`)	Check all CRL and OCSP endpoints for all chain certificates.
crcAnyCRL (`5`)	At least one CRL check for every certificate in the chain must succeed.
crcAnyOCSP (`6`)	At least one OCSP check for every certificate in the chain must succeed.
crcAnyCRLOrOCSP (`7`)	At least one CRL or OCSP check for every certificate in the chain must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL (`8`)	At least one CRL or OCSP check for every certificate in the chain must succeed. OCSP endpoints are checked first.

This property is not available at design time.

Data Type

Integer

TLSSSLOptions Property (OfficeSigner Class)

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Syntax

int GetTLSSSLOptions();
int SetTLSSSLOptions(int iTLSSSLOptions);

Default Value

Remarks

Various SSL (TLS) protocol options, set of


cssloExpectShutdownMessage	`0x001`	Wait for the close-notify message when shutting down the connection
cssloOpenSSLDTLSWorkaround	`0x002`	(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions
cssloDisableKexLengthAlignment	`0x004`	Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.
cssloForceUseOfClientCertHashAlg	`0x008`	Enforce use of client certificate hash algorithm. It is unlikely that you will ever need to adjust it.
cssloAutoAddServerNameExtension	`0x010`	Automatically add server name extension when known
cssloAcceptTrustedSRPPrimesOnly	`0x020`	Accept trusted SRP primes only
cssloDisableSignatureAlgorithmsExtension	`0x040`	Disable (not send) signature algorithms extension. It is unlikely that you will ever need to adjust it.
cssloIntolerateHigherProtocolVersions	`0x080`	(server option) Do not allow fallback from TLS versions higher than currently enabled
cssloStickToPrefCertHashAlg	`0x100`	Stick to preferred certificate hash algorithms
cssloNoImplicitTLS12Fallback	`0x200`	Disable implicit TLS 1.3 to 1.2 fallbacks
cssloUseHandshakeBatches	`0x400`	Send handshake message as large batches rather than individually

Data Type

Integer

TLSTLSMode Property (OfficeSigner Class)

Specifies the TLS mode to use.

Syntax

int GetTLSTLSMode();
int SetTLSTLSMode(int iTLSTLSMode);

Possible Values

SM_DEFAULT(0), 
SM_NO_TLS(1), 
SM_EXPLICIT_TLS(2), 
SM_IMPLICIT_TLS(3), 
SM_MIXED_TLS(4)

Default Value

Remarks

Specifies the TLS mode to use.


smDefault	`0`
smNoTLS	`1`	Do not use TLS
smExplicitTLS	`2`	Connect to the server without any encryption and then request an SSL session.
smImplicitTLS	`3`	Connect to the specified port, and establish the SSL session at once.
smMixedTLS	`4`	Connect to the specified port, and establish the SSL session at once, allow plain data.

Data Type

Integer

TLSUseExtendedMasterSecret Property (OfficeSigner Class)

Enables Extended Master Secret Extension, as defined in RFC 7627.

Syntax

bool GetTLSUseExtendedMasterSecret();
int SetTLSUseExtendedMasterSecret(bool bTLSUseExtendedMasterSecret);

Default Value

false

Remarks

Enables Extended Master Secret Extension, as defined in RFC 7627.

Data Type

Boolean

TLSUseSessionResumption Property (OfficeSigner Class)

Enables or disables TLS session resumption capability.

Syntax

bool GetTLSUseSessionResumption();
int SetTLSUseSessionResumption(bool bTLSUseSessionResumption);

Default Value

false

Remarks

Enables or disables TLS session resumption capability.

Data Type

Boolean

TLSVersions Property (OfficeSigner Class)

Th SSL/TLS versions to enable by default.

Syntax

int GetTLSVersions();
int SetTLSVersions(int iTLSVersions);

Default Value

Remarks

Th SSL/TLS versions to enable by default.


csbSSL2	`0x01`	SSL 2
csbSSL3	`0x02`	SSL 3
csbTLS1	`0x04`	TLS 1.0
csbTLS11	`0x08`	TLS 1.1
csbTLS12	`0x10`	TLS 1.2
csbTLS13	`0x20`	TLS 1.3

Data Type

Integer

TrustedCertCount Property (OfficeSigner Class)

The number of records in the TrustedCert arrays.

Syntax

int GetTrustedCertCount();
int SetTrustedCertCount(int iTrustedCertCount);

Default Value

Remarks

This property controls the size of the following arrays:

TrustedCertBytes
TrustedCertHandle

The array indices start at 0 and end at TrustedCertCount - 1.

This property is not available at design time.

Data Type

Integer

TrustedCertBytes Property (OfficeSigner Class)

Returns raw certificate data in DER format.

Syntax

QByteArray GetTrustedCertBytes(int iTrustedCertIndex);

Remarks

Returns raw certificate data in DER format.

The TrustedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TrustedCertHandle Property (OfficeSigner Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

qint64 GetTrustedCertHandle(int iTrustedCertIndex);
int SetTrustedCertHandle(int iTrustedCertIndex, qint64 lTrustedCertHandle);

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The TrustedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is not available at design time.

Data Type

Long64

ValidationLog Property (OfficeSigner Class)

Contains the complete log of the certificate validation routine.

Syntax

QString GetValidationLog();

Default Value

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only and not available at design time.

Data Type

String

XAdESForm Property (OfficeSigner Class)

Specifies which form of XAdES should be produced.

Syntax

int GetXAdESForm();
int SetXAdESForm(int iXAdESForm);

Possible Values

XAF_UNKNOWN(0), 
XAF_BASIC(1), 
XAF_BES(2), 
XAF_EPES(3), 
XAF_T(4), 
XAF_C(5), 
XAF_X(6), 
XAF_XL(7), 
XAF_A(8), 
XAF_EXTENDED_BES(9), 
XAF_EXTENDED_EPES(10), 
XAF_EXTENDED_T(11), 
XAF_EXTENDED_C(12), 
XAF_EXTENDED_X(13), 
XAF_EXTENDED_XLONG(14), 
XAF_EXTENDED_XL(15), 
XAF_EXTENDED_A(16)

Default Value

Remarks

Use this property to specify the form (level) of advanced electronic signature to be produced.


xafUnknown	`0`
xafBasic	`1`	XAdES form, supported by XAdES v1.1.1
xafBES	`2`	XAdES-BES form, supported starting from XAdES v1.2.2
xafEPES	`3`	XAdES-EPES form, supported starting from XAdES v1.2.2
xafT	`4`	XAdES-T form
xafC	`5`	XAdES-C form
xafX	`6`	XAdES-X form
xafXL	`7`	XAdES-X-L form
xafA	`8`	XAdES-A form
xafExtendedBES	`9`	XAdES-E-BES form
xafExtendedEPES	`10`	XAdES-E-EPES form
xafExtendedT	`11`	XAdES-E-T form
xafExtendedC	`12`	XAdES-E-C form
xafExtendedX	`13`	XAdES-E-X form
xafExtendedXLong	`14`	XAdES-E-X-Long form (type 1)
xafExtendedXL	`15`	XAdES-E-X-L form (type 2)
xafExtendedA	`16`	XAdES-E-A form

* XAdES-E-* forms are supported starting from XAdES v1.3.2

Data Type

Integer

XAdESVersion Property (OfficeSigner Class)

Specifies XAdES version.

Syntax

int GetXAdESVersion();
int SetXAdESVersion(int iXAdESVersion);

Possible Values

XAV_UNKNOWN(0), 
XAV_111(1), 
XAV_122(2), 
XAV_132(3), 
XAV_141(4)

Default Value

Remarks

This property specifies the version of the XAdES specification the signature should comply with. For the form of XAdES, use XAdESForm.


xavUnknown	`0`
xav111	`1`	XAdES v1.1.1
xav122	`2`	XAdES v1.2.2
xav132	`3`	XAdES v1.3.2
xav141	`4`	XAdES v1.4.1 (aka v1.4.2)

Data Type

Integer

Config Method (OfficeSigner Class)

Sets or retrieves a configuration setting.

Syntax

QString Config(const QString& qsConfigurationString);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Error Handling

This method returns a String value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.

DoAction Method (OfficeSigner Class)

Performs an additional action.

Syntax

QString DoAction(const QString& qsActionID, const QString& qsActionParams);

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier of the action is provided in ActionID parameter. ActionParams contains a list of parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

Error Handling

ExtractAsyncData Method (OfficeSigner Class)

Extracts user data from the DC signing service response.

Syntax

QString ExtractAsyncData(const QString& qsAsyncReply);

Remarks

Call this method before finalizing the asynchronous signing process to extract the data passed to the ExternalCrypto.Data property on the pre-signing stage.

The Data parameter can be used to pass some state or document identifier along with the signing request from the pre-signing to completion async stage.

Error Handling

Sign Method (OfficeSigner Class)

Calculates the signature value.

Syntax

int Sign();

Remarks

Call this method to generate a signature over the document.

Error Handling

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

SignAsyncBegin Method (OfficeSigner Class)

Initiates the asynchronous signing operation.

Syntax

QString SignAsyncBegin();

Remarks

When using the DC framework, call this method to initiate the asynchronous signing process. Upon completion, a pre-signed copy of the document will be saved in OutputFile (or OutputStream). Keep the pre-signed copy somewhere local, and pass the returned string ('the request state') to the DC processor for handling.

Upon receiving the response state from the DC processor, assign the path to the pre-signed copy to InputFile (or InputStream), and call SignAsyncEnd to finalize the signing.

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.

AsyncState is a message of the distributed cryptography (DC) protocol. DC protocol is based on exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes.

In a typical scenario you get a client-side async state from the SignAsyncBegin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth control), which processes it and produces a matching signatures state. The async state produced by the server is then passed to the SignAsyncEnd method.

Error Handling

SignAsyncEnd Method (OfficeSigner Class)

Completes the asynchronous signing operation.

Syntax

int SignAsyncEnd(const QString& qsAsyncReply);

Remarks

When using the DC framework, call this method upon receiving the response state from the DC processor to complete the asynchronous signing process.

Before calling this method, assign the path to the pre-signed copy of the document obtained from prior SignAsyncBegin call to InputFile (or InputStream). The method will embed the signature into the pre-signed document, and save the complete signed document to OutputFile (or OutputStream).

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.

Error Handling

SignExternal Method (OfficeSigner Class)

Signs the document using an external signing facility.

Syntax

int SignExternal();

Remarks

Call this method to delegate the low-level signing operation to an external, remote, or custom signing engine. This method is useful if the signature has to be made by a device accessible through a custom or non-standard signing interface.

When all preparations are done and hash is computed, the class fires ExternalSign event which allows to pass the hash value for signing.

Error Handling

Timestamp Method (OfficeSigner Class)

Use this method to add timestamp.

Syntax

int Timestamp(int iTimestampType);

Remarks

Call this method to timestamp the signature. Use the TimestampServer property to provide the address of the TSA (Time Stamping Authority) server which should be used for timestamping. Use the TimestampType parameter to specify the type of timestamp to create

Supported timestamp types:


tstSignature	`12`	Signature timestamp
tstRefsOnly	`13`	RefsOnly timestamp
tstSigAndRefs	`14`	SigAndRefs timestamp
tstArchive	`7`	Archive timestamp

Error Handling

Upgrade Method (OfficeSigner Class)

Upgrades existing XAdES signature to a new form.

Syntax

int Upgrade(int iToForm);

Remarks

XAdES standard defines a number of different 'forms' of signatures which can be used for different purposes. Use this method to upgrade XAdES signature to a new form specified by ToForm. Signatures can normally be upgraded from less sophisticated levels (BES, EPES) to more sophisticated (T, C, X, X-L, A).

Supported forms:


xafUnknown	`0`
xafBasic	`1`	XAdES form, supported by XAdES v1.1.1
xafBES	`2`	XAdES-BES form, supported starting from XAdES v1.2.2
xafEPES	`3`	XAdES-EPES form, supported starting from XAdES v1.2.2
xafT	`4`	XAdES-T form
xafC	`5`	XAdES-C form
xafX	`6`	XAdES-X form
xafXL	`7`	XAdES-X-L form
xafA	`8`	XAdES-A form
xafExtendedBES	`9`	XAdES-E-BES form
xafExtendedEPES	`10`	XAdES-E-EPES form
xafExtendedT	`11`	XAdES-E-T form
xafExtendedC	`12`	XAdES-E-C form
xafExtendedX	`13`	XAdES-E-X form
xafExtendedXLong	`14`	XAdES-E-X-Long form (type 1)
xafExtendedXL	`15`	XAdES-E-X-L form (type 2)
xafExtendedA	`16`	XAdES-E-A form

Error Handling

ChainElementDownload Event (OfficeSigner Class)

TBD.

Syntax

class OfficeSignerChainElementDownloadEventParams {
public:
  const QString &Cert();

  const QString &CACert();

  const QString &Location();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void ChainElementDownload(OfficeSignerChainElementDownloadEventParams *e);

// Or, subclass OfficeSigner and override this emitter function.
virtual int FireChainElementDownload(OfficeSignerChainElementDownloadEventParams *e) {...}

Remarks

TBD.

ChainElementNeeded Event (OfficeSigner Class)

TBD.

Syntax

class OfficeSignerChainElementNeededEventParams {
public:
  const QString &Cert();

  const QString &CACert();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void ChainElementNeeded(OfficeSignerChainElementNeededEventParams *e);

// Or, subclass OfficeSigner and override this emitter function.
virtual int FireChainElementNeeded(OfficeSignerChainElementNeededEventParams *e) {...}

Remarks

TBD.

Error Event (OfficeSigner Class)

Information about errors during signing.

Syntax

class OfficeSignerErrorEventParams {
public:
  int ErrorCode();

  const QString &Description();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Error(OfficeSignerErrorEventParams *e);

// Or, subclass OfficeSigner and override this emitter function.
virtual int FireError(OfficeSignerErrorEventParams *e) {...}

Remarks

This event is fired in case of exceptional conditions during the office document processing.

ErrorCode contains an error code and Description contains a textual description of the error.

ExternalSign Event (OfficeSigner Class)

Handles remote or external signing initiated by the SignExternal method or other source.

Syntax

class OfficeSignerExternalSignEventParams {
public:
  const QString &OperationId();

  const QString &HashAlgorithm();

  const QString &Pars();

  const QString &Data();

  const QString &SignedData();
  void SetSignedData(const QString &qsSignedData);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void ExternalSign(OfficeSignerExternalSignEventParams *e);

// Or, subclass OfficeSigner and override this emitter function.
virtual int FireExternalSign(OfficeSignerExternalSignEventParams *e) {...}

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the component via SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact component being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contain algorithm-dependent parameters.

The component uses base16 (hex) encoding for Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses a .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

Notification Event (OfficeSigner Class)

This event notifies the application about an underlying control flow event.

Syntax

class OfficeSignerNotificationEventParams {
public:
  const QString &EventID();

  const QString &EventParam();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Notification(OfficeSignerNotificationEventParams *e);

// Or, subclass OfficeSigner and override this emitter function.
virtual int FireNotification(OfficeSignerNotificationEventParams *e) {...}

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

This class can fire this event with the following EventID values:


DocumentLoaded	Reports the completion of Office document processing by the component. Use the event handler to access document-related information. The EventParam value passed with this EventID is empty.
TimestampRequest	A timestamp is requested from the custom timestamping authority. This event is only fired if TimestampServer was set to a virtual:// URI. The EventParam parameter contains the TSP request (or the plain hash, depending on the value provided to TimestampServer), in base16, that needs to be sent to the TSA. Use the event handler to send the request to the TSA. Upon receiving the response, assign it, in base16, to the TimestampResponse configuration property.

StoreCertificate Event (OfficeSigner Class)

This event is fired when a certificate should be stored along with a signature.

Syntax

class OfficeSignerStoreCertificateEventParams {
public:
  const QByteArray &Cert();

  const QString &URI();
  void SetURI(const QString &qsURI);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void StoreCertificate(OfficeSignerStoreCertificateEventParams *e);

// Or, subclass OfficeSigner and override this emitter function.
virtual int FireStoreCertificate(OfficeSignerStoreCertificateEventParams *e) {...}

Remarks

This event could occur if you are verifying XAdES-C form or higher. Cert parameter contains a certificate in binary form that should be stored along with a signature, and the user should provide the URI of the stored certificate.

StoreCRL Event (OfficeSigner Class)

This event is fired when a CRL should be stored along with a signature.

Syntax

class OfficeSignerStoreCRLEventParams {
public:
  const QByteArray &CRL();

  const QString &URI();
  void SetURI(const QString &qsURI);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void StoreCRL(OfficeSignerStoreCRLEventParams *e);

// Or, subclass OfficeSigner and override this emitter function.
virtual int FireStoreCRL(OfficeSignerStoreCRLEventParams *e) {...}

Remarks

This event could occur if you are verifying XAdES-C form or higher. CRL parameter contains a CRL in binary form that should be stored along with a signature, and the user should provide the URI of the stored CRL.

StoreOCSPResponse Event (OfficeSigner Class)

This event is fired when a OCSP Response should be stored along with a signature.

Syntax

class OfficeSignerStoreOCSPResponseEventParams {
public:
  const QByteArray &OCSPResponse();

  const QString &URI();
  void SetURI(const QString &qsURI);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void StoreOCSPResponse(OfficeSignerStoreOCSPResponseEventParams *e);

// Or, subclass OfficeSigner and override this emitter function.
virtual int FireStoreOCSPResponse(OfficeSignerStoreOCSPResponseEventParams *e) {...}

Remarks

This event could occur if you are verifying XAdES-C form or higher. OCSPResponse parameter contains an OCSP Response in binary form that should be stored along with a signature, and the user should provide the URI of the stored OCSP Response.

TLSCertValidate Event (OfficeSigner Class)

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Syntax

class OfficeSignerTLSCertValidateEventParams {
public:
  const QString &ServerHostname();

  const QString &ServerIP();

  bool Accept();
  void SetAccept(bool bAccept);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void TLSCertValidate(OfficeSignerTLSCertValidateEventParams *e);

// Or, subclass OfficeSigner and override this emitter function.
virtual int FireTLSCertValidate(OfficeSignerTLSCertValidateEventParams *e) {...}

Remarks

This event is fired during a TLS handshake. Use TLSServerChain property to access the certificate chain. In general case, components may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the component, and can be adjusted if needed.

ValidationProgress Event (OfficeSigner Class)

TBD.

Syntax

class OfficeSignerValidationProgressEventParams {
public:
  const QString &ValidationEventType();

  const QString &Cert();

  const QString &CACert();

  bool DoContinue();
  void SetDoContinue(bool bDoContinue);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void ValidationProgress(OfficeSignerValidationProgressEventParams *e);

// Or, subclass OfficeSigner and override this emitter function.
virtual int FireValidationProgress(OfficeSignerValidationProgressEventParams *e) {...}

Remarks

TBD.

Configuration Settings (OfficeSigner Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

OfficeSigner Configuration Settings

ClaimedRoleText: The text of the claimed role.

Use this property to specify the text of the first claimed role.

TBD

ClaimedRoleXML: The XML content of the claimed roles.

Use this property to specify the XML content of the claimed roles element.

TBD

CommitmentTypeIndicationAllSignedDataObjects[Index]: Specifies the CommitmentTypeIndication's AllSignedDataObjects.

This property contains if the CommitmentTypeIndication's AllSignedDataObjects element is present that indicates that all the signed data objects share the same commitment. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationCount: The number of the CommitmentTypeIndication elements.

Returns the number of the xades:CommitmentTypeIndication elements available.

CommitmentTypeIndicationIdentifier[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's Identifier.

This property contains an identifier indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's Identifier element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationIdentifierDescription[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's Description.

This property contains an identifier's description indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's Description element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationIdentifierDocumentationReferences[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences.

This property contains an identifier's documentation references indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationIdentifierQualifier[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier.

This property contains an identifier qualifier indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationObjectReference[Index]: Specifies the CommitmentTypeIndication's ObjectReference.

This property contains the CommitmentTypeIndication's ObjectReference elements that refer to one or several ds:Reference elements of the ds:SignedInfo corresponding with one data object qualified by this property. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationQualifiersXML[Index]: The XML content of the CommitmentTypeIndication's Qualifiers.

This property contains the CommitmentTypeIndication's Qualifiers elements XML content. Index value could be omitted for the first CommitmentTypeIndication element.

ExpireTime: Signature expiration time in UTC.

Specifies the signature expiration time in UTC. Used for Binary Crypto API signature.

ForceCompleteChainValidation: Whether to check the CA certificates when the signing certificate is invalid.

Set this property to True to check issuer (CA) certificates if the signing or an intermediate chain certificate is invalid.

ForceCompleteChainValidationForTrusted: Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors.

Set this property to True to enable full chain validation for explicitly trusted intermediary or end-entity certificates. This may be useful when creating signatures to enforce completeness of the collected revocation information. It often makes sense to set this property to false when validating signatures to reduce validation time and avoid issues with badly configured environments.

GracePeriod: Specifies a grace period to apply during revocation information checks.

Use this property to specify a grace period (in seconds). Grace period applies to certain subprotocols, such as OCSP, and caters to the inaccuracy and/or missynchronization of clocks on different participating systems. Any time deviations within the grace period will be tolerated.

IgnoreOCSPNoCheckExtension: Whether OCSP NoCheck extension should be ignored.

Set this property to false to make the validation engine ignore the OCSP no-check extension. You would normally need to set this property when validating severely non-compliant chains that misuse the extension, causing chain loops or other validation issues.

IgnoreSystemTrust: Whether trusted Windows Certificate Stores should be treated as trusted.

Specifies whether, during chain validation, the component should respect the trust to CA certificates as configured in the operating system. In Windows this effectively defines whether the component should trust the certificates residing in the Trusted Root Certification Authorities store.

If IgnoreSystemTrust is True, certificates residing in the trusted root store are treated as if they are known, rather than trusted. Only certificates provided via other means (such as TrustedCertificates property) are considered trusted.

IgnoreTimestampFailure: Whether to ignore time-stamping failure during signing.

If this property is set to True, any failure during time-stamping process will be ignored.

ImplicitlyTrustSelfSignedCertificates: Whether to trust self-signed certificates.

Set this property to True to implicitly trust all self-signed certificates. Use it with care as trusting just about every self-signed certificate is unwise. One exceptional reason where this property may be handy is where a chain is validated in an environment that is not supposed to trust it (for example, a signing, rather than verifying environment, or a QA server). Trusting all self-signing certificates (which are normally trusted) allows to emulate the verifying environment without actually changing its security settings.

IncludeKnownRevocationInfoToSignature: Whether to include custom revocation info to the signature.

This property specifies whether revocation pieces provided via KnownCertificates, KnownCRLs, and KnownOCSPs properties should be included into the signature. This property lets you include custom validation elements to the signature in addition to the ones comprising the signing chain.

ProductionPlace: Identifies the place of the signature production.

Use this property to specify the signature production place.

Sample value: "CITY=Test City, ST=Test State, POSTALCODE=Test Code, C=Test Country"

PromoteLongOCSPResponses: Whether long OCSP responses are requested.

Set this property to True to force the class to publish 'long' form of OCSP responses. Otherwise, only BasicOCSPResponse blobs are promoted.

RefsTimestampType: Specifies references timestamp type to include to the signature.

Contains a comma-separated list of values that specifies which references timestamp type to include to the signature when signature upgraded to XAdES-X or XAdES-E-X form.

Supported values are:


SigAndRefs		SigAndRefs timestamp
RefsOnly		RefsOnly timestamp

SignatureInfoAddress1: Specifies the location at which the signature was created.

Use this property to specify the location at which the signature was created.

SignatureInfoAddress2: Specifies the location at which the signature was created.

Use this property to specify the location at which the signature was created.

SignatureInfoComments: Comments to the signature info text.

Comments to the signature info text.

SignatureInfoDelegateSuggestedSigner: Specifies the name of a person.

Use this property to specify the name of a person to whom the signature has been delegated.

SignatureInfoDelegateSuggestedSigner2: Specifies the title of a person.

Use this property to specify the title of a person to whom the signature has been delegated.

SignatureInfoDelegateSuggestedSignerEmail: Specifies the e-mail address of a person.

Use this property to specify the e-mail address of a person to whom the signature has been delegated.

SignatureInfoImage: Specifies an image for the digital signature.

Use his property to set an image for the digital signature.

SignatureInfoIncluded: Whether to include the signature info.

Specifies whether to include the signature info.

Sample code that demonstrates adding signature information for OpenXML documents: signer.EnableXAdES = true; signer.XAdESForm = xafEPES; signer.Config("SignatureInfoIncluded=true"); signer.Config("SignatureInfoText=Text"); signer.Config("SignatureInfoComments=Comment"); signer.Config("ClaimedRoleText=Role"); signer.Config("CommitmentTypeIndicationCount=1"); signer.Config("CommitmentTypeIndicationAllSignedDataObjects=true"); signer.Config("CommitmentTypeIndicationIdentifier=http://uri.etsi.org/01903/v1.2.2#ProofOfApproval"); signer.Config("CommitmentTypeIndicationIdentifierDescription=Approved this document"); signer.Config("ProductionPlace=CITY=Test City, ST=Test State, POSTALCODE=Test Code, C=Test Country"); signer.Config("SignatureInfoAddress1=Address1"); signer.Config("SignatureInfoAddress2=Address2");

SignatureInfoInvalidLnImage: Specifies the image of an invalid signature.

Use this property to set the image of an invalid signature, if the digital signature must be printed.

SignatureInfoSignatureType: Specifies the type of the digital signature.

Use this property to specify the type of the digital signature.

When the type is 2, both SignatureInfoValidLnImage and SignatureInfoInvalidLnImage images should be specified.

SignatureInfoText: The text to be displayed as the signature info.

The text to be displayed as the signature info.

SignatureInfoValidLnImage: Specifies the image of a valid signature.

Use this property to set the image of a valid signature, if the digital signature must be printed.

SignatureLineAdditionalSignatureInfo[Index]: Contains additional signature information.

This property contains additional signature information.

SignatureLineAllowComments[Index]: Indicates if comments are allowed.

This property contains the True value if comments are allowed.

SignatureLineCount: The number of signature lines.

Returns the number of the signature lines available for Office Open XML (OOXML) documents.

SignatureLineId[Index]: Contains signature unique ID.

This property contains signature unique ID.

SignatureLineImageData[Index]: Contains signature image.

This property contains signature image.

SignatureLineIndex: Specifies the index of the signature line to sign.

Use this property to specify the signature line that should be signed. If the default value of -1 is assigned to this property, no signature line will be signed.

SignatureLineShowSignDate[Index]: Indicates if signing date should be shown.

This property contains the True value if the signature line should include the signing date.

SignatureLineSignatureIndex[Index]: The index of the signature that signs signature line.

This property contains the index of the signature that signs this signature line.

SignatureLineSignatureProviderId[Index]: Contains signature provider ID.

This property contains a unique ID identifying which signature provider created the signature line.

SignatureLineSignatureProviderUrl[Index]: Contains signature provider URL.

This property contains a signature provider download URL.

SignatureLineSigned[Index]: Indicates if signature line is signed.

This property contains the True value if signature line is signed.

SignatureLineSigningInstructions[Index]: Contains signing instructions.

This property contains the instructions, shown to the user at signing time.

SignatureLineSuggestedSigner2[Index]: Suggested signer line two.

This property contains the second line of information of who should sign the signature line.

SignatureLineSuggestedSigner[Index]: Suggested signer line one.

This property contains the first line of information of who should sign the signature line.

SignatureLineSuggestedSignerEmail[Index]: Suggested signer email address.

This property contains the email address of who should sign the signature line.

SignTime: Specifies the signing time in UTC.

Specifies the signing time in UTC. Used for Binary Crypto API signature.

SigPolicyDescription: signature policy description.

This property specifies the Description of the signature policy.

SigPolicyExplicitText: The explicit text of the user notice.

Use this property to specify the explicit text of the user notice to be displayed when the signature is verified.

SigPolicyHash: The hash value of the signature policy.

This property contains the hash value of the signature policy.

SigPolicyHashAlgorithm: Specifies the hash algorithm used to compute the signature policy hash.

Use this property to specify the algorithm used to compute the signature policy hash.

Supported values:


SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`

SigPolicyID: Identifies the signature policy.

This property contains an identifier that uniquely identifies a specific version of the signature policy.

SigPolicyNoticeNumbers: Contains user notice numbers.

This property provides an access to the list of notice numbers, by which the explicit signature policy notice texts could be retrieved.

SigPolicyNoticeOrganization: The organization part of the NoticeReference qualifier.

Use this property to specify the "organization" part of the NoticeReference signature policy qualifier for XAdES-EPES form.

SigPolicyURI: Signature policy URI.

This property specifies the URI of the signature policy.

TempPath: Location where the temporary files are stored.

This setting specifies an absolute path to the location on disk where temporary files are stored.

TimestampCanonicalizationMethod: Specifies canonicalization method used in timestamp.

Use this property to specify the canonicalization method used in timestamp.


cxcmNone	`0`
cxcmCanon	`1`
cxcmCanonComment	`2`
cxcmExclCanon	`3`
cxcmExclCanonComment	`4`
cxcmMinCanon	`5`
cxcmCanon_v1_1	`6`
cxcmCanonComment_v1_1	`7`

TimestampValidationDataDetails: Specifies timestamp validation data details to include to the signature.

Contains a comma-separated list of values that specifies which validation data values details to include to the signature when xades:TimeStampValidationData element added.

Supported values are:


certificate		Base64-encoded [X509v3] certificates
crl		Base64-encoded certificate revocation lists (CRL)
ocsp		OCSP responses

TLSChainValidationDetails: Contains the advanced details of the TLS server certificate validation.

Check this property in TLSCertValidate event handler to access the TLS certificate validation details.

TLSChainValidationResult: Contains the result of the TLS server certificate validation.

Check this property in TLSCertValidate event handler to obtain the TLS certificate validation result.

TLSClientAuthRequested: Indicates whether the TLS server requests client authentication.

Check this property in TLSCertValidate event handler to find out whether the TLS server requests the client to provide the authentication certificate. If this property is set to true, provide your certificate via TLSClientChain property. Note that the component may fire this event more than once during each operation, as more than one TLS-enabled server may need to be contacted.

TLSValidationLog: Contains the log of the TLS server certificate validation.

Check this property in TLSCertValidate event handler to retrieve the validation log of the TLS server.

TolerateMinorChainIssues: Whether to tolerate minor chain issues.

TBD

TspHashAlgorithm: Sets a specific hash algorithm for use with the timestamping service.

In default configuration class uses the 'SHA256' hash algorithm. Use this property to specify a different hash algorithm for the timestamp.

UseMicrosoftCTL: Enables or disables automatic use of Microsoft online certificate trust list.

Enable this property to make the chain validation module automatically look up missing CA certificates in the public Windows Update repository.

UseSystemCertificates: Enables or disables the use of the system certificates.

Use this property to tell chain validation module automatically look up missing CA certificates in the system certificates. In many cases it is beneficial to switch this property on, as the operating system certificate configuration provides a representative trust framework.

ValidationDataRefsDetails: Specifies validation data references details to include to the signature.

Contains a comma-separated list of values that specifies which validation data references details to include to the signature when signature upgraded to XAdES-C or XAdES-E-C form.

Supported values are:


certificate		References to X.509 certificates
crl		References to certificate revocation lists (CRL)
ocsp		References to OCSP responses

ValidationDataValuesDetails: Specifies validation data values details to include to the signature.

Contains a comma-separated list of values that specifies which validation data values details to include to the signature when signature upgraded to XAdES-X-L or XAdES-E-X-L form.

Supported values are:


certificate		Base64-encoded [X509v3] certificates
crl		Base64-encoded certificate revocation lists (CRL)
ocsp		OCSP responses

Base Configuration Settings

CheckKeyIntegrityBeforeUse: Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching: Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:


off		No caching (default)
local		Local caching (supported for HTTPClient, RESTClient and SOAPClient only)
global		Global caching

Cookies: Gets or sets local cookies for the class (supported for HTTPClient, RESTClient and SOAPClient only).

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE: Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies: Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

LogDestination: Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:


file		File
console		Console
systemlog		System Log (supported for Android only)
debugger		Debugger (supported for VCL for Windows and .Net)

LogDetails: Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:


time		Current time
level		Level
package		Package name
module		Module name
class		Class name
method		Method name
threadid		Thread Id
contenttype		Content type
content		Content
all		All details

LogFile: Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters: Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:


exclude-package		Exclude a package specified in the value
exclude-module		Exclude a module specified in the value
exclude-class		Exclude a class specified in the value
exclude-method		Exclude a method specified in the value
include-package		Include a package specified in the value
include-module		Include a module specified in the value
include-class		Include a class specified in the value
include-method		Include a method specified in the value

LogFlushMode: Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:


none		No flush (caching only)
immediate		Immediate flush (real-time logging)
maxcount		Flush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel: Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:


none		None (by default)
fatal		Severe errors that cause premature termination.
error		Other runtime errors or unexpected conditions.
warning		Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
info		Interesting runtime events (startup/shutdown).
debug		Detailed information on flow of through the system.
trace		More detailed information.

LogMaxEventCount: Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode: Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:


none		No rotation
deleteolder		Delete older entries from the cache upon reaching LogMaxEventCount
keepolder		Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

Tag: Allows to store any custom data.

Use this config property to store any custom data.

UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS: Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom: Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (OfficeSigner Class)

OfficeSigner Errors

1048577   Invalid parameter value (SB_ERROR_INVALID_PARAMETER)
1048578   Class is configured incorrectly (SB_ERROR_INVALID_SETUP)
1048579   Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE)
1048580   Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE)
1048581   Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY)
1048581   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER)
24117249   Input file does not exist (SB_ERROR_OFFICE_INPUTFILE_NOT_EXISTS)
24117250   Unsupported document format (SB_ERROR_OFFICE_UNSUPPORTED_DOCUMENT_FORMAT)
24117251   Document cannot be signed (SB_ERROR_OFFICE_DOCUMENT_NOT_SIGNABLE)
24117252   Document is not signed (SB_ERROR_OFFICE_DOCUMENT_NOT_SIGNED)
24117253   Document is encrypted (SB_ERROR_OFFICE_DOCUMENT_ENCRYPTED)
24117254   Document cannot be encrypted (SB_ERROR_OFFICE_DOCUMENT_NOT_ENCRYPTABLE)
24117255   Document is not encrypted (SB_ERROR_OFFICE_DOCUMENT_NOT_ENCRYPTED)
24117256   Unknown encryption algorithm (SB_ERROR_OFFICE_DOCUMENT_UNKNOWN_ENCRYPTION)
24117257   Invalid password (SB_ERROR_OFFICE_INVALID_PASSWORD)
24117258   Signature not found (SB_ERROR_OFFICE_SIGNATURE_NOT_FOUND)


	1048577 Invalid parameter value (`SB_ERROR_INVALID_PARAMETER`)
	1048578 Class is configured incorrectly (`SB_ERROR_INVALID_SETUP`)
	1048579 Operation cannot be executed in the current state (`SB_ERROR_INVALID_STATE`)
	1048580 Attempt to set an invalid value to a property (`SB_ERROR_INVALID_VALUE`)
	1048581 Certificate does not have its private key loaded (`SB_ERROR_NO_PRIVATE_KEY`)
	1048581 Cancelled by the user (`SB_ERROR_CANCELLED_BY_USER`)
	24117249 Input file does not exist (`SB_ERROR_OFFICE_INPUTFILE_NOT_EXISTS`)
	24117250 Unsupported document format (`SB_ERROR_OFFICE_UNSUPPORTED_DOCUMENT_FORMAT`)
	24117251 Document cannot be signed (`SB_ERROR_OFFICE_DOCUMENT_NOT_SIGNABLE`)
	24117252 Document is not signed (`SB_ERROR_OFFICE_DOCUMENT_NOT_SIGNED`)
	24117253 Document is encrypted (`SB_ERROR_OFFICE_DOCUMENT_ENCRYPTED`)
	24117254 Document cannot be encrypted (`SB_ERROR_OFFICE_DOCUMENT_NOT_ENCRYPTABLE`)
	24117255 Document is not encrypted (`SB_ERROR_OFFICE_DOCUMENT_NOT_ENCRYPTED`)
	24117256 Unknown encryption algorithm (`SB_ERROR_OFFICE_DOCUMENT_UNKNOWN_ENCRYPTION`)
	24117257 Invalid password (`SB_ERROR_OFFICE_INVALID_PASSWORD`)
	24117258 Signature not found (`SB_ERROR_OFFICE_SIGNATURE_NOT_FOUND`)

SecureBlackbox 2022 Qt Edition

OfficeSigner Class

Syntax

Remarks

Property List

Method List

Event List

Configuration Settings

BlockedCertCount Property (OfficeSigner Class)

Syntax

Default Value

Remarks

Data Type

BlockedCertBytes Property (OfficeSigner Class)

Syntax

Remarks

Data Type

BlockedCertHandle Property (OfficeSigner Class)

Syntax

Default Value

Remarks

Data Type

ChainValidationDetails Property (OfficeSigner Class)

Syntax

Default Value

Remarks

Data Type

ChainValidationResult Property (OfficeSigner Class)

Syntax

Possible Values

Default Value

Remarks

Data Type

ClaimedSigningTime Property (OfficeSigner Class)

Syntax

Default Value

Remarks

Data Type

CurrentCACertBytes Property (OfficeSigner Class)

Syntax

Remarks

Data Type

CurrentCACertCA Property (OfficeSigner Class)

Syntax

Default Value

Remarks

Data Type

CurrentCACertCAKeyID Property (OfficeSigner Class)

Syntax

Remarks

Data Type

CurrentCACertCRLDistributionPoints Property (OfficeSigner Class)

Syntax

Default Value

Remarks

Data Type

CurrentCACertCurve Property (OfficeSigner Class)

Syntax

Default Value

Remarks

Data Type

CurrentCACertFingerprint Property (OfficeSigner Class)

Syntax

Remarks

Data Type

CurrentCACertFriendlyName Property (OfficeSigner Class)

Syntax

Default Value

Remarks

Data Type

CurrentCACertHandle Property (OfficeSigner Class)

Syntax

Default Value

Remarks

Data Type

CurrentCACertHashAlgorithm Property (OfficeSigner Class)

Syntax

Default Value

Remarks

Data Type