SFTP Configuration

By default the backslash character is treated as a path separator and is not allowed in file and folder names. When this configuration setting is set to True, backslashes "\" are allowed in file and folder names, and are not supported as path separators.

The default value is False.

If specified, the component will use this value to format the filetime string returned through the DirList event. If no format is specified, the component will format the date dependent on the year. If the filetime is in the same year, it will be formatted as "MMM dd HH:mm", otherwise it will be formatted as "MMM dd yyyy".

This applies to the file mask value specified by the RemoteFile property. The default value is true. If set to false, the file mask will be case sensitive.

This setting is only applicable when TransferMode is set to 1 (ASCII). The default value is a CrLf character sequence.

When uploading or downloading this value will be compared to ServerEOL. If ServerEOL and LocalEOL are different, the line endings in the file being transferred will be converted to the line endings used by the destination. Line endings will be converted to the value in LocalEOL when downloading. Line endings will be converted to the value in ServerEOL when uploading. If ServerEOL and LocalEOL are the same, no conversion takes place.

The value supplied to this setting must be quoted. For instance:

component.Config("LocalEOL=\"" + myEOLSequence + "\"");

Conversion will only happen when TransferMode is set to 1 (ASCII) and ServerEOL and LocalEOL are different.

This setting is only applicable when TransferMode is set to 1 (ASCII). The default value is a CrLf character sequence.

When uploading or downloading this value will be compared to LocalEOL. If ServerEOL and LocalEOL are different, the line endings in the file being transferred will be converted to the line endings used by the destination. Line endings will be converted to the value in LocalEOL when downloading. Line endings will be converted to the value in ServerEOL when uploading. If ServerEOL and LocalEOL are the same, no conversion takes place.

The value supplied to this setting must be quoted. For instance:

component.Config("ServerEOL=\"" + myEOLSequence + "\"");

Conversion will only happen when TransferMode is set to 1 (ASCII) and ServerEOL and LocalEOL are different.

While the SSH specification requires servers and clients to support SSH packets of at least 32000 bytes, some server implementations limit packet size to smaller values. MaxFileData provides a means by which the user can specify the maximum amount of data that can be put into an SFTP packet so that the component can communicate effectively with these servers. If you are having difficulty when uploading to a server, try setting MaxFileData size to a value smaller than 32000.

Most servers that use smaller values will use a maximum SSH packet size of 16KB (16384). In order to most efficiently communicate with such servers, MaxFileData size should be set to 14745.

The default value is 32768.

This governs the highest allowable SFTP version to use when negotiating the version with the server. The default value is 3 as this is the most common version. The component supports values from 3 to 6. It is recommended to use the default value of 3 unless there is a specific reason a higher version is needed.

If set to True, the component will preserve the file's timestamps during transfer. This is applicable to both uploads and downloads. The default value is False.

The value 0 represents Binary and the value 1 represents ASCII. If the value is 0 (default), the initial server mode will be used.

When this value is set to 1 (ASCII) the component will use the values specified in LocalEOL and ServerEOL to convert line endings as appropriate.

Note: When this value is set to 1 (ASCII) and ProtocolVersion is set to 4 or higher the component will automatically determine the value for ServerEOL if the server supports the "newline" protocol extension.

This setting returns the target of the specified symbolic link. To use the setting, pass the remote path and file name of the symbolic link.

The RealPathControlFlag configuration setting can be used to specify the control flags sent to the SFTP server in the SSH_FXP_REALPATH request. This can be set to one of the following values:

If this configuration setting is not set, no control flags will be specified in the request and SSH_FXP_REALPATH_NO_CHECK will be assumed.

When this value is set to "True" the component will upload the data in the file specified by LocalFile and continue monitoring LocalFile for additional data to upload until no new data is found for RealTimeUploadAgeLimit seconds. This allows you to start uploading a file immediately after the file is created and continue uploading as data is written to the file. The default value is "False".

This value is only applicable when RealTimeUpload is set to "True". This specifies the number of seconds for which the component will monitor LocalFile for new data to upload. If this limit is reached and no new data is found in LocalFile the upload will complete. The default value is "1".

This setting specifies the maximum number of simultaneous file transfers. This is used when processing files added to the transfer queue by QueueFile. The default value is "5".

This configuration setting specifies the SSH version string used by the component. The default value is "SSH-2.0-IP*Works! SSH Client v9.0".

When authenticating via public key authentication this setting may be set to the CA signed client's public key. This is useful when the server has been configured to trust client keys signed by a particular CA. For instance:

component.Config("SignedSSHCert=ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAB...");

If the server's host key was signed by a CA, this setting may be used to specify the CA's public key. If specified the component will trust any server's host key that was signed by the CA. For instance:

component.Config("SSHAcceptServerCAKey=ssh-rsa AAAAB3NzaC1yc2EAAAADAQAB...");

The default value is "false". Set this to "true" to accept any key presented by the server.

This may be set to a comma-delimited collection of 16-byte MD5 fingerprints that should be accepted as the host's key. You may supply it by HEX encoding the values in the form "0a:1b:2c:3d". Example:

SSHClient.Config("SSHAcceptServerHostKeyFingerprint=0a:1b:2c:3d");

This may be used to specify the list of supported Key Exchange algorithms used during SSH negotiation. The value should contain a comma separated list of algorithms. Supported algorithms are:

• diffie-hellman-group1-sha1
• diffie-hellman-group14-sha1
• diffie-hellman-group-exchange-sha256
• diffie-hellman-group-exchange-sha1

This may be used to specify an alternate list of supported Mac algorithms used during SSH negotiation. This also specifies the order in which the Mac algorithms are preferred. The value should contain a comma separated list of algorithms. Supported algorithms are:

• hmac-sha1
• hmac-md5
• hmac-sha1-96
• hmac-md5-96
• hmac-sha2-256
• hmac-sha2-256-96
• hmac-sha2-512
• hmac-sha2-512-96
• hmac-ripemd160
• hmac-ripemd160-96

Once this property is set the component will renegotiate the SSH keys with the remote host.

Example:

SSHClient.Config("SSHKeyRenegotiate")

This property allows you to specify the threshold, in the number of bytes, for the SSH Key Renegotiation. The default value for this property is set to 1 GB.

Example (for setting the threshold to 500 MB):

SSHComponent.Config("KeyRenegotiationThreshold=524288000")

This property may be set to the fully qualified (DNS) name of the kerberos realm (or Windows Active Directory domain name) to use during GSSAPI authentication. This can be used to force authentication with a given realm if the client and server machines are not part of the same domain.

The default value is "true". If set to "false", the client will not ask for credentials delegation support during authentication. Note that even if the client asks for delegation, the server/KDC might not grant it and authentication will still succeed.

This property can be set to specify the Service Principal Name (SPN) associated with the SSH service on the remote host. This will usually be in the form "host/fqdn.of.sshhost[@REALM]". If not specified, the component will assume the SPN is based on the value of the SSHHost property and the kerberos realm used for authentication.

This setting can be enabled to assist in debugging. When set to True the component will fire the SSHStatus event with detailed information about the SSH level packets. The default value is False.

This setting specifies the maximum size of an individual data packet, in bytes, that can be sent to the sender.

This setting specifies how many bytes of channel data can be sent to the sender of this message without adjusting the window. Note that this value may be changed during the connection, but the window size can only be increased, not decreased.

This may be when using the diffie-hellman-group-exchange-sha1 or diffie-hellman-group-exchange-sha256 key exchange algorithms to control the preferred size, in bits, of the modulus (p) prime number to request from the server. Acceptable values are between 1024 and 8192.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the component will use Timeout for establishing a connection and transmitting/receiving data.

This is the same as AutoDetect. This setting is provided for use by components that do not directly expose Firewall properties.

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

NOTE: This is the same as Host. This setting is provided for use by components that do not directly expose Firewall properties.

This entry is for IPPort only and does not work for other components that descend from IPPort.

If this entry is set, the component acts as a server. RemoteHost and RemotePort are used to tell the SOCKS firewall in which address and port to listen to. The firewall rules may ignore RemoteHost, and it is recommended that RemoteHost be set to empty string in this case.

RemotePort is the port in which the firewall will listen to. If set to 0, the firewall will select a random port. The binding (address and port) is provided through the ConnectionStatus event.

The connection to the firewall is made by calling the Connect method.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the component throws an exception.

NOTE: This is the same as Password. This setting is provided for use by components that do not directly expose Firewall properties.

Note that the FirewallPort is set automatically when FirewallType is set to a valid value.

NOTE: This is the same as Port. This setting is provided for use by components that do not directly expose Firewall properties.

The appropriate values are as follows:

NOTE: This is the same as FirewallType. This setting is provided for use by components that do not directly expose Firewall properties.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the component throws an exception.

NOTE: This is the same as User. This setting is provided for use by components that do not directly expose Firewall properties.

When set, TCPKeepAlive will automatically be set to true. By default the operating system will determine the time a connection is idle before a TCP keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Note: This value is not applicable in Java.

When set, TCPKeepAlive will automatically be set to true. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgement is received from the remote host the keep-alive packet will be re-sent. This setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in Java or MAC.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), there are two scenarios for determining how long the connection will linger. The first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP protocol timeout expires.

In the second scenario, LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the component returns control immediately, the system could hold system resources until all pending data is sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (by a client acknowledgment, for example), setting this property to False might be the appropriate course of action.

LingerTime is the time, in seconds, to leave the socket connection linger. This value is 0 by default, which means it will use the default IP protocol timeout.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the component initiate connections (or accept in the case of server components) only through that interface.

If the component is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

This must be set before a connection is attempted. It instructs the component to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes. The maximum value is 65536 bytes.

This setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default this is not set and there is no limit.

If set to a positive value, this setting defines the length of data records to be received. The component will accumulate data until RecordLength is reached and only then fire the DataIn event with data of length RecordLength. This allows data to be received as records of known length. This value can be changed at any time, including within the DataIn event.

The default value is 0, meaning this setting is not used.

If set to true, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

When set to 0 (default), the component will use IPv4 exclusively. When set to 1, the component will use IPv6 exclusively. To instruct the component to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are:

This setting determines whether the input or output stream is closed after the transfer completes. When set to True (default), all streams will be closed after a transfer is completed. In order to keep streams open after the transfer of data, set this to False. the default value is True.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for UDP ports.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes).

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

In a GUI-based application, long-running blocking operations may cause the application to stop responding to input until the operation returns. The component will attempt to discover whether or not the application has a message loop and, if one is discovered, it will process events in that message loop during any such blocking operation.

In some non-GUI applications an invalid message loop may be discovered that will result in errant behavior. In these cases, setting GuiAvailable to false will ensure that the component does not attempt to process external events.

If set to True, when the component creates a thread the thread's IsBackground property will be explicitly set to True. By default this setting is False.

By default the component will use the system security libraries to perform cryptographic functions. This means calls to unmanaged code will be made. In certain environments this is not desirable. To use a completely managed security implementation set this setting to True. Setting this to True tells the component to use the internal managed implementation instead of using the system's security API.

Note that when this value is set the product's system dll is no longer required as a reference, as all unmanaged code is stored in this file.