AS1Sender Class

Properties   Methods   Events   Config Settings   Errors  

The AS1Sender class implements an AS1 / EDI-INT client, capable of sending EDI messages over electronic mail.

Syntax

ipworksedi.as1sender()

Remarks

The AS1Sender component is used to send EDI or other messages over SMTP/S, using the AS1 protocol specified in RFC 3335. The class is also used to retrieve and verify server responses.

A typical AS1 transaction is as follows:

(1) The sender sends an EDI document to the receiver using SMTP or SMTPS. Typically the document will be signed and encrypted (particularly if TLS/SSL is not used). A signed receipt will also be requested.

(2) The receiver decrypts the message and verifies the signature.

(3) The receiver sends a signed receipt back to the client. The signature is over the hash of an MDN, which contains a hash of the received message.

When sending an EDI message, the client should specify, at a minimum, From and SendTo, MailServer, and EDIDataData and EDIDataEDIType. The Send method should then be invoked.

To secure the EDI transmission, the message may be signed and/or encrypted by setting the appropriate certificates. By default, the class will apply message security if the appropriate certificates are specified. To sign the data set SigningCert. To encrypt, set RecipientCerts.

TLS/SSL will also be used if SSLStartMode is set. In case your trading partner is using a self-signed certificate with their mail server it will be necessary to set SSLAcceptServerCert or trap the SSLServerAuthentication event to accept the certificate.

The message may also be compressed by setting CompressionFormat.

To request a receipt, or Message Disposition Notification (MDN), simply set the MDNTo property. The MDN will be returned in a separate email response. The MDNOptions property may be used to customize the request. By default, the class will request a signed MDN over an SHA1 hash.

Validating AS1 MDNs

AS1 MDNs are returned asynchronously in a separate email. Generally MDNs will not be returned immediately.

The class supports the use of the POP/S protocol for receiving e-mail. To receive an MDN, set the MailServer, User, and Password properties, and call Connect. At this point you may search your mailbox using the MailMessage properties; when you have found the appropriate message you should invoke ReadReceipt, which will set MDNReceipt. If the receipt is indeed an MDN it will also be parsed (although not verified) and MessageId will be set. If the message is not an MDN an exception will be thrown.

You should then use the values of From and MessageId to look up your trading partner's certificates, the MDNOptions requested, and the OriginalContentMIC calculated when you sent the original message (you must store this value externally to verify signed receipts). Finally, invoke VerifyReceipt.

Property List


The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

AttachmentsCollection of files attached to the current message.
CompressionFormatThe compression format (if any) to use.
ConnectedThis shows whether the class is connected.
EDIDataThe EDI or other data to be sent.
EncryptionAlgorithmThe algorithm used to encrypt the EDI data.
FirewallA set of properties related to firewall access.
FromThe sender of the original message.
LocalHostThe name of the local host or user-assigned IP interface through which connections are initiated or accepted.
LogDirectoryThe path to a directory for logging.
LogFileThe log file written.
MailMessageCcThe value of the Cc header of the mail message.
MailMessageCountThe number of messages waiting in the mailbox.
MailMessageDateThe message date for the currently selected message.
MailMessageFromThe sender of the mail message.
MailMessageHeadersThe message headers for the currently selected message.
MailMessageNumberThe message number on the incoming mail server.
MailMessageReplyToThe value of the ReplyTo header of the mail message.
MailMessageSizeThe size of the mail message.
MailMessageSubjectThe subject of the mail message.
MailMessageTextThe text of the mail message.
MailMessageToThe recipient of the mail message.
MailMessageUIDThe unique id of the mail message.
MailServerThe address of your mail server.
MDNOptionsUsed to indicate the options requested for the MDN receipt.
MDNReceiptThe MDN receipt returned from the server.
MDNToThe system to which an MDN should be directed.
MessageIdThe Id of the message.
OriginalContentMICThe Message Integrity Check(s) (one-way hash) of the outgoing message.
PasswordThe password for your incoming mail server.
ReceiptSignerCertThe public key certificate for the MDN receipt signature.
RecipientCertsThe public key certificates of the recipients for this message.
SendToThe recipient of the message.
SignatureAlgorithmSignature algorithm to be used in outgoing messages.
SigningCertContains the certificate to use when signing messages.
SSLAcceptServerCertInstructs the class to unconditionally accept the server certificate that matches the supplied certificate.
SSLCertThe certificate to be used during SSL negotiation.
SSLProviderThis specifies the SSL/TLS implementation to use.
SSLServerCertThe server certificate for the last established connection.
SSLStartModeDetermines how the class starts the SSL negotiation. By default, SSL will not be used.
SubjectThe subject of the message.
UserThe username for your incoming mail server.

Method List


The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

ConfigSets or retrieves a configuration setting.
ConnectConnects to the incoming mail server.
DeleteMessageDeletes the message specified by MailMessageNumber .
DisconnectDisconnects from the incoming mail server.
ProcessQueueSend the messages queued for sending.
QueryMessageSizeReturns the size in bytes of the current message.
QueryMessageUIDReturns the unique identifier of the message as specified by the server.
QueuePrepares and queues the message to the specified directory.
ReadReceiptReads and parses (but does not verify) an MDN receipt.
ResetResets the state of the control.
SelectMailMessageSelects and obtains information about the specified message.
SendPrepares and sends the AS1 message.
SetRequestHeaderAllows the user to set or add arbitrary HTTP request headers.
VerifyReceiptVerifies an MDN receipt.

Event List


The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

ConnectionStatusThis event is fired to indicate changes in the connection state.
EndTransferFired when the message text completes transferring.
ErrorInformation about errors during data delivery.
HeaderThis event is fired for every message header being retrieved.
LogFired with log information while processing a message.
PITrailTraces the commands sent to the mail server, and the respective replies.
SSLServerAuthenticationFired after the server presents its certificate to the client.
SSLStatusShows the progress of the secure connection.
StartTransferFired when the message text starts transferring (on either a send or receive).
TransferFired while the message text gets transferred to or from MailServer .

Config Settings


The following is a list of config settings for the class with short descriptions. Click on the links for further details.

LogFilenameThe base name of the log file.
POPPortThe POP mail port to be used, if different than MailServer.
POPServerThe POP server to be used, if different than MailServer.
SMTPAuthMechanismThe authentication mechanism used to connect to the SMTP server.
SMTPPasswordThe password used for authentication.
SMTPPortThe SMTP mail port to be used, if different than MailServer.
SMTPServerThe SMTP server to be used, if different than MailServer.
SMTPSSLStartModeDetermines how SSL negotiation starts with the SMTP server.
SMTPUserThe user name used for authentication.
LogSSLPacketsControls whether SSL packets are logged when using the internal security API.
OpenSSLCADirThe path to a directory containing CA certificates.
OpenSSLCAFileName of the file containing the list of CA's trusted by your application.
OpenSSLCipherListA string that controls the ciphers to be used by SSL.
OpenSSLPrngSeedDataThe data to seed the pseudo random number generator (PRNG).
ReuseSSLSessionDetermines if the SSL session is reused.
SSLAcceptAnyServerCertWhether to trust any certificate presented by the server.
SSLCACertsA newline separated list of CA certificate to use during SSL client authentication.
SSLCipherStrengthThe minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuitesThe cipher suite to be used in an SSL negotiation.
SSLEnabledProtocolsUsed to enable/disable the supported security protocols.
SSLEnableRenegotiationWhether the renegotiation_info SSL extension is supported.
SSLIncludeCertChainWhether the entire certificate chain is included in the SSLServerAuthentication event.
SSLKeyLogFileThe location of a file where per-session secrets are written for debugging purposes.
SSLNegotiatedCipherReturns the negotiated cipher suite.
SSLNegotiatedCipherStrengthReturns the negotiated cipher suite strength.
SSLNegotiatedCipherSuiteReturns the negotiated cipher suite.
SSLNegotiatedKeyExchangeReturns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrengthReturns the negotiated key exchange algorithm strength.
SSLNegotiatedVersionReturns the negotiated protocol version.
SSLSecurityFlagsFlags that control certificate verification.
SSLServerCACertsA newline separated list of CA certificate to use during SSL server certificate validation.
TLS12SignatureAlgorithmsDefines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.
TLS12SupportedGroupsThe supported groups for ECC.
TLS13KeyShareGroupsThe groups for which to pregenerate key shares.
TLS13SignatureAlgorithmsThe allowed certificate signature algorithms.
TLS13SupportedGroupsThe supported groups for (EC)DHE key exchange.
BuildInfoInformation about the product's build.
CodePageThe system code page used for Unicode to Multibyte translations.
LicenseInfoInformation about the current license.
MaskSensitiveWhether sensitive data is masked in log messages.
UseInternalSecurityAPITells the class whether or not to use the system security libraries or an internal implementation.

AS1Sender.Attachments Property

Collection of files attached to the current message.

Syntax

getAttachments(): EDIAttachmentList;
setAttachments(attachments: EDIAttachmentList): void;

Default Value

Remarks

When a call to Send is made, the class will attach the files referenced by each EDIAttachment in this collection to the EDIData.

This property is not available at design time.

Please refer to the EDIAttachment type for a complete list of fields.

AS1Sender.CompressionFormat Property

The compression format (if any) to use.

Syntax

getCompressionFormat(): As1senderCompressionFormats;
setCompressionFormat(compressionFormat: As1senderCompressionFormats): void;

enum As1senderCompressionFormats { cfNone, cfZLIB }

Default Value

0

Remarks

By default, outgoing data will not be compressed. Setting this property will instruct the class to compress the outgoing data using the indicated format.

Compression is highly recommended for large messages, as it will reduce network bandwidth and processing time required.

The compression algorithm used is Zlib, as required by RFC 3274 and defined in RFCs 1950 and 1951.

AS1Sender.Connected Property

This shows whether the class is connected.

Syntax

isConnected(): boolean;

Default Value

FALSE

Remarks

This property is used to determine whether or not the class is connected to the remote host.

Note: It is recommended to use the Connect or Disconnect method instead of setting this property.

This property is not available at design time.

AS1Sender.EDIData Property

The EDI or other data to be sent.

Syntax

getEDIData(): EDIData;
setEDIData(EDIData: EDIData): void;

Default Value

Remarks

The EDI message to send.

This property is not available at design time.

Please refer to the EDIData type for a complete list of fields.

AS1Sender.EncryptionAlgorithm Property

The algorithm used to encrypt the EDI data.

Syntax

getEncryptionAlgorithm(): string;
setEncryptionAlgorithm(encryptionAlgorithm: string): void;

Default Value

"3DES"

Remarks

If RecipientCerts contains a valid certificate, the data will be encrypted using this certificate and the algorithm specified in EncryptionAlgorithm. If EncryptionAlgorithm is set to the empty string, the data will not be encrypted.

The class supports "3DES", or industry-standard 168-bit Triple-DES encryption.

The class supports "AES" encryption with a default keysize of 128 bits. You may also set "AESCBC192" or "AESCBC256" for 192- and 256-bit keysizes.

Possible values are:

  • 3DES (default)
  • DES
  • AESCBC128
  • AESCBC192
  • AESCBC256
  • AESGCM128
  • AESGCM192
  • AESGCM256

AS1Sender.Firewall Property

A set of properties related to firewall access.

Syntax

getFirewall(): Firewall;
setFirewall(firewall: Firewall): void;

Default Value

Remarks

This is a Firewall-type property, which contains fields describing the firewall through which the class will attempt to connect.

Please refer to the Firewall type for a complete list of fields.

AS1Sender.From Property

The sender of the original message.

Syntax

getFrom(): string;
setFrom(from: string): void;

Default Value

""

Remarks

The sender of the original message. The recipient is given by SendTo.

Note that From and SendTo correspond to the sender and recipient of the original message. For MDNs the roles are reversed, so that From indicates the recipient, and SendTo indicates the sender of the MDN.

AS1Sender.LocalHost Property

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

getLocalHost(): string;
setLocalHost(localHost: string): void;

Default Value

""

Remarks

The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

AS1Sender.LogDirectory Property

The path to a directory for logging.

Syntax

getLogDirectory(): string;
setLogDirectory(logDirectory: string): void;

Default Value

""

Remarks

Setting LogDirectory will instruct the component to log the details of each transmission to unique files in the specified directory. For each request processed, the class will log the original EDI data, the complete text of the outgoing request and the incoming response.

The class will write a file for each transmission, with extension ".log". In case of error an additional file will be written with extension ".err", and the error will be reported in both files. Raw AS1 messages created or downloaded by the class will be written with extension ".as1", and MDNs created or downloaded will be written with extension ".as1-mdn".

The filenames will be chosen automatically by the class. Each filename will be the system time, in the format YYYY-MM-DD-HH-MM-SS-MMMM, with extensions "-2", "-3", used in case files of those names already exist. After each transaction is processed LogFile will contain the name of the files just written, minus the extension ".log" or ".err".

If logs cannot be written an exception will be thrown.

AS1Sender.LogFile Property

The log file written.

Syntax

getLogFile(): string;

Default Value

""

Remarks

In case LogDirectory is specified two log files will be written in the specified directory and LogFile will contain the path.

LogFile will in fact refer to several files with appropriate extensions. A diagnostic log will be written with filename LogFile + ".log", and any EDI data read will be written with filename LogFile + ".dat". Raw AS1 messages and MDNs will also be written with extensions ".as1" and ".as1-mdn".

This property is read-only.

AS1Sender.MailMessageCc Property

The value of the Cc header of the mail message.

Syntax

getMailMessageCc(): string;

Default Value

""

Remarks

After calling SelectMailMessage this property will be populated with the value of the Cc header of the mail message.

This property is read-only.

AS1Sender.MailMessageCount Property

The number of messages waiting in the mailbox.

Syntax

getMailMessageCount(): number;

Default Value

0

Remarks

When the class is not connected to the mail server, the value of the MailMessageCount property is 0. When connected, it contains the number of messages in the mailbox. You may set MailMessageNumber to any value between 1 and MailMessageCount to inspect a given message.

This property is read-only.

AS1Sender.MailMessageDate Property

The message date for the currently selected message.

Syntax

getMailMessageDate(): string;

Default Value

""

Remarks

The date will be formatted like the following example:

Wed, 29 Dec 2004 11:58:02 +0700

This property is read-only.

AS1Sender.MailMessageFrom Property

The sender of the mail message.

Syntax

getMailMessageFrom(): string;

Default Value

""

Remarks

After calling SelectMailMessage this property will be populated. When processing AS1 transmissions, this will correspond to From. When processing MDNs, this will correspond to SendTo.

This property is read-only.

AS1Sender.MailMessageHeaders Property

The message headers for the currently selected message.

Syntax

getMailMessageHeaders(): string;

Default Value

""

Remarks

After calling SelectMailMessage this property will contain the full headers of the mail message as reported by the mail server.

This property is read-only.

AS1Sender.MailMessageNumber Property

The message number on the incoming mail server.

Syntax

getMailMessageNumber(): number;
setMailMessageNumber(mailMessageNumber: number): void;

Default Value

0

Remarks

MailMessageNumber specifies a number between 1 and MailMessageCount, and serves as a message pointer to an incoming mail message.

Set this property before calling SelectMailMessage, QueryMessageSize or QueryMessageUID.

This property is not available at design time.

AS1Sender.MailMessageReplyTo Property

The value of the ReplyTo header of the mail message.

Syntax

getMailMessageReplyTo(): string;

Default Value

""

Remarks

After calling SelectMailMessage this property will be populated with the value of the ReplyTo header of the mail message.

This property is read-only.

AS1Sender.MailMessageSize Property

The size of the mail message.

Syntax


Default Value

0

Remarks

After calling QueryMessageSize this property will be populated with the the size of the mail message.

Note: It is recommended to use the QueryMessageSize method instead of getting this property.

This property is read-only.

AS1Sender.MailMessageSubject Property

The subject of the mail message.

Syntax

getMailMessageSubject(): string;

Default Value

""

Remarks

After calling SelectMailMessage this property will be populated with the subject of the mail message.

This property is read-only.

AS1Sender.MailMessageText Property

The text of the mail message.

Syntax

getMailMessageText(): string;

Default Value

""

Remarks

The text of the mail message identified by MailMessageNumber, if it has been downloaded from the server. To read the message, invoke ReadRequest (receiver) or ReadReceipt (sender). In case the message is not as AS1 message this will throw an exception, but you may catch it and then read the value of MailMessageText.

This property is read-only.

AS1Sender.MailMessageTo Property

The recipient of the mail message.

Syntax

getMailMessageTo(): string;

Default Value

""

Remarks

After calling SelectMailMessage this property will be populated with the recipient of the mail message.

This property is read-only.

AS1Sender.MailMessageUID Property

The unique id of the mail message.

Syntax


Default Value

""

Remarks

After calling QueryMessageUID this property will be populated with the unique id of the mail message.

Note: It is recommended to use the QueryMessageUID method instead of getting this property.

This property is read-only.

AS1Sender.MailServer Property

The address of your mail server.

Syntax

getMailServer(): string;
setMailServer(mailServer: string): void;

Default Value

""

Remarks

The address of your mail server. By default, the class will send outgoing mail via SMTP, and receive incoming mail via POP. Moreover, the class will assume that both servers are located at the address specified by MailServer.

In case you use different addresses for incoming and outgoing mail you should set the POPServer and SMTPServer configuration settings appropriately. You may also set POPPort and SMTPPort in case you use nonstandard ports.

To configure SSL you should set SSLStartMode. Note that if SSL is used for sending but not receiving, or vice versa, you should set SSLStartMode each time you send or receive a file.

AS1Sender.MDNOptions Property

Used to indicate the options requested for the MDN receipt.

Syntax

getMDNOptions(): string;
setMDNOptions(MDNOptions: string): void;

Default Value

"signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha-256"

Remarks

By default, the class will request that the MDN be signed with a PKCS#7 signature over a SHA-256 hash, which is the industry standard.

Set MDNOptions to an empty string to request an unsigned receipt.

This property will automatically be updated when SignatureAlgorithm is set. Normally you will not need to set this property, however you can set a value here to override the automatically generated value.

The string format is that of the Disposition-Notification-Options HTTP header, as specified in RFC 3335. As a form of shorthand, you may set this property to "sha1", "sha-256", or "md5" to request the indicated hash algorithm.

AS1Sender.MDNReceipt Property

The MDN receipt returned from the server.

Syntax

getMDNReceipt(): MDNReceipt;
setMDNReceipt(MDNReceipt: MDNReceipt): void;

Default Value

Remarks

This property will contain an instance of MDNReceipt with the complete MDN receipt returned from the AS2 receiver. The receipt will be a signed or unsigned multipart/report in MIME format. For synchronous MDN requests, this property is populated automatically after the call to Post. If an asynchronous MDN is sent over HTTP, it may be read from the HTTP context by calling ReadAsyncReceipt, or it may be set manually.

When MDNReceipt is set to a valid MDN receipt, the originator of the receipt will be stored in AS2To, the intended recipient (presumably your system) will be stored in AS2From, and the original message ID will be stored in MessageId.

If you are processing a MDN receipt asynchronously, you can use the values to look up the original message and validate the receipt. Set the OriginalContentMIC, MDNOptions, and ReceiptSignerCert to the values originally computed when the message was sent (if you are requesting async MDNs you must save this information externally.). You can then validate the asynchronous receipt by invoking VerifyReceipt.

Alternatively, AsyncMDNInfoDir may be set in place of OriginalContentMIC, MessageId, and MDNOptions (provided it was set to the same value when the message was sent). If AsyncMDNInfoDir was specified when the message was sent, the class would have saved OriginalContentMIC and MDNOptions to a file identified by the MessageId for the transmission. These properties are read from the file matching the MessageId in the MDNReceipt automatically if AsyncMDNInfoDir is specified.

Note: MDNReceipt must be populated prior to calling VerifyReceipt.

Please refer to the MDNReceipt type for a complete list of fields.

AS1Sender.MDNTo Property

The system to which an MDN should be directed.

Syntax

getMDNTo(): string;
setMDNTo(MDNTo: string): void;

Default Value

""

Remarks

If this property is set, a Disposition-Notification-To header will be added to the request, and an MDN will be requested. You should specify a valid email address; you might, for example, specify the same e-mail address as in From.

By default, the class will request a PKCS#7 signature signed over SHA-1. You may set MDNOptions to customize this.

AS1Sender.MessageId Property

The Id of the message.

Syntax

getMessageId(): string;
setMessageId(messageId: string): void;

Default Value

""

Remarks

The Id format is as in RFC 2822: id-left@id-right.

In AS1, customizing the MessageId is not supported. An appropriate MessageId will be generated by the class for each outgoing message. You should record this value after sending this value, and set it again when you verify the receipt.

This property is not available at design time.

AS1Sender.OriginalContentMIC Property

The Message Integrity Check(s) (one-way hash) of the outgoing message.

Syntax

getOriginalContentMIC(): string;
setOriginalContentMIC(originalContentMIC: string): void;

Default Value

""

Remarks

A MIC will be calculated over the outgoing message using the same algorithm in the SignatureAlgorithm configuration used to sign the message. The property will be set when Post (in AS3, Send) is invoked, and the MIC will automatically be checked against the Original-Content-MIC in the MDN for synchronous MDNs.

The format is in RFC 3335, i.e. "w7AguNJEmhF/qIjJw6LnnA==, md5", with a newline at the end.

If you are requesting an asynchronous MDN, you must save this value externally so that it can be loaded when the MDN is received (you may also use AsyncMDNInfoDir).

AS1Sender.Password Property

The password for your incoming mail server.

Syntax

getPassword(): string;
setPassword(password: string): void;

Default Value

""

Remarks

The password for your incoming mail server. Set this before invoking Connect.

AS1Sender.ReceiptSignerCert Property

The public key certificate for the MDN receipt signature.

Syntax

getReceiptSignerCert(): Certificate;
setReceiptSignerCert(receiptSignerCert: Certificate): void;

Default Value

Remarks

Ordinarily, if your trading partner uses the same certificate for both signing and encryption, the certificate specified in RecipientCert is used for both encryption and verifying the receipt signature.

If your trading partner uses different certificates for signing and encryption, you must set this property to the public key for you partner's signing certificate before invoking Post.

After invoking Post or VerifyReceipt, this will contain the certificate used to sign the receipt, if the receipt is signed.

If set, this property should be a public key instance of Certificate.

Please refer to the Certificate type for a complete list of fields.

AS1Sender.RecipientCerts Property

The public key certificates of the recipients for this message.

Syntax

getRecipientCerts(): CertificateList;
setRecipientCerts(recipientCerts: CertificateList): void;

Default Value

Remarks

The encryption certificates of the recipients. If this property is specified, the message content will be encrypted using the algorithm given by EncryptionAlgorithm.

This property will also be used to verify signed receipts if ReceiptSignerCert is not specified. In this case, it will use the first certificate found in the collection, if one exists. If your trading partner uses different certificates for signing and encryption, you should set RecipientCerts to the encryption certificate(s) and ReceiptSignerCert to the signing certificate.

If the class is unable to verify a signature make sure RecipientCerts are set appropriately.

If set, this property should could contain public key instances of Certificate.

The encryption certificates of the recipients. If this property is specified, the message content will be encrypted using the algorithm given by EncryptionAlgorithm.

This property will also be used to verify signed receipts if ReceiptSignerCert is not specified. In this case, it will use the first certificate found in the collection, if one exists. If your trading partner uses different certificates for signing and encryption, you should set RecipientCerts to the encryption certificate(s) and ReceiptSignerCert to the signing certificate.

If the class is unable to verify a signature make sure RecipientCerts are set appropriately.

If set, this property should could contain public key instances of Certificate.

This property is not available at design time.

Please refer to the Certificate type for a complete list of fields.

AS1Sender.SendTo Property

The recipient of the message.

Syntax

getSendTo(): string;
setSendTo(sendTo: string): void;

Default Value

""

Remarks

The recipient of the AS1 message. The originator is given by From.

Note that From and SendTo correspond to the sender and recipient of the original message. For MDNs the roles are reversed, so that From indicates the recipient, and SendTo indicates the sender of the MDN.

AS1Sender.SignatureAlgorithm Property

Signature algorithm to be used in outgoing messages.

Syntax

getSignatureAlgorithm(): string;
setSignatureAlgorithm(signatureAlgorithm: string): void;

Default Value

"sha-256"

Remarks

Signature Algorithm can be set to indicate the preferred signing algorithm. Possible values are:

  • sha1
  • md5
  • sha-256 (or sha256) (default)
  • sha-384 (or sha384)
  • sha-512 (or sha512)
  • sha-224 (or sha224)

The default value is "sha-256". When this property is set the MDNOptions property is automatically updated to request the MDN receipt be signed with the same algorithm.

AS1Sender.SigningCert Property

Contains the certificate to use when signing messages.

Syntax

getSigningCert(): Certificate;
setSigningCert(signingCert: Certificate): void;

Default Value

Remarks

This is your signing certificate. If this property is specified, the message content will be signed using the algorithm given by SignatureAlgorithm.

If set, this property should be a private key instance of Certificate.

Please refer to the Certificate type for a complete list of fields.

AS1Sender.SSLAcceptServerCert Property

Instructs the class to unconditionally accept the server certificate that matches the supplied certificate.

Syntax

getSSLAcceptServerCert(): Certificate;
setSSLAcceptServerCert(SSLAcceptServerCert: Certificate): void;

Default Value

Remarks

If it finds any issues with the certificate presented by the server, the class will normally terminate the connection with an error.

You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally.

Please note that this functionality is provided only for cases where you otherwise know that you are communicating with the right server. If used improperly, this property may create a security breach. Use it at your own risk.

Please refer to the Certificate type for a complete list of fields.

AS1Sender.SSLCert Property

The certificate to be used during SSL negotiation.

Syntax

getSSLCert(): Certificate;
setSSLCert(SSLCert: Certificate): void;

Default Value

Remarks

The digital certificate that the class will use during SSL negotiation. Set this property to a valid certificate before starting SSL negotiation. To set a certificate, you may set the field to the encoded certificate. To select a certificate, use the store and subject fields.

Please refer to the Certificate type for a complete list of fields.

AS1Sender.SSLProvider Property

This specifies the SSL/TLS implementation to use.

Syntax

getSSLProvider(): As1senderSSLProviders;
setSSLProvider(SSLProvider: As1senderSSLProviders): void;

enum As1senderSSLProviders { sslpAutomatic, sslpPlatform, sslpInternal }

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:

0 (sslpAutomatic - default)Automatically selects the appropriate implementation.
1 (sslpPlatform) Uses the platform/system implementation.
2 (sslpInternal) Uses the internal implementation.
Additional Notes

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected the platform implementation will be used by default in all cases in the JavaScript edition.

Note: The Internal provider is not support at this time.

AS1Sender.SSLServerCert Property

The server certificate for the last established connection.

Syntax

getSSLServerCert(): Certificate;

Default Value

Remarks

SSLServerCert contains the server certificate for the last established connection.

SSLServerCert is reset every time a new connection is attempted.

This property is read-only.

Please refer to the Certificate type for a complete list of fields.

AS1Sender.SSLStartMode Property

Determines how the class starts the SSL negotiation. By default, SSL will not be used.

Syntax

getSSLStartMode(): As1senderSSLStartModes;
setSSLStartMode(SSLStartMode: As1senderSSLStartModes): void;

enum As1senderSSLStartModes { sslAutomatic, sslImplicit, sslExplicit, sslNone }

Default Value

3

Remarks

The SSLStartMode property may have one of the following values:

0 (sslAutomatic - default)If the remote port is set to the standard plaintext port of the protocol (where applicable), the class will behave the same as if SSLStartMode is set to sslExplicit. In all other cases, SSL negotiation will be implicit (sslImplicit).
1 (sslImplicit)The SSL negotiation will start immediately after the connection is established.
2 (sslExplicit)The class will first connect in plaintext, and then explicitly start SSL negotiation through a protocol command such as STARTTLS.
3 (sslNone)No SSL negotiation, no SSL security. All communication will be in plaintext mode.

AS1Sender.Subject Property

The subject of the message.

Syntax

getSubject(): string;
setSubject(subject: string): void;

Default Value

"AS1 Message"

Remarks

The human-readable subject of the outgoing message.

AS1Sender.User Property

The username for your incoming mail server.

Syntax

getUser(): string;
setUser(user: string): void;

Default Value

""

Remarks

The username for your incoming mail server. Set this before invoking Connect.

AS1Sender.config Method

Sets or retrieves a configuration setting.

Syntax

async as1sender.config(configurationString : string): Promise<string>

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

AS1Sender.connect Method

Connects to the incoming mail server.

Syntax

async as1sender.connect(): Promise<void>

Remarks

Connects to the incoming mail server specified by MailServer. You must set User and Password prior to calling Connect. The connection will be maintained until you call Disconnect.

If you wish to connect in SSL you should first set the SSLStartMode property. Note that it is not necessary to explicitly connect to an SMTP server for outgoing mail; a connection will be created and destroyed each time a mail is sent.

AS1Sender.deleteMessage Method

Deletes the message specified by MailMessageNumber .

Syntax

async as1sender.deleteMessage(): Promise<void>

Remarks

Requests that the MailServer delete the message specified by MailMessageNumber. The message will not actually be deleted until the connection is closed.

AS1Sender.disconnect Method

Disconnects from the incoming mail server.

Syntax

async as1sender.disconnect(): Promise<void>

Remarks

Disconnects from the incoming mail server specified by MailServer.

AS1Sender.processQueue Method

Send the messages queued for sending.

Syntax

async as1sender.processQueue(directory : string): Promise<void>

Remarks

Invoking ProcessQueue sends the messages that have been queued by Queue.

AS1Sender.queryMessageSize Method

Returns the size in bytes of the current message.

Syntax

async as1sender.queryMessageSize(): Promise<number>

Remarks

This method queries the server for the size in bytes of the message specified by MailMessageNumber. The method returns the size (in bytes) of the message.

AS1Sender.queryMessageUID Method

Returns the unique identifier of the message as specified by the server.

Syntax

async as1sender.queryMessageUID(): Promise<string>

Remarks

This method returns the unique identifier of the message specified by MailMessageNumber.

AS1Sender.queue Method

Prepares and queues the message to the specified directory.

Syntax

async as1sender.queue(directory : string): Promise<void>

Remarks

Invoking Queue will prepare and queue the AS1 message. It will be signed if SigningCert is set, encrypted if RecipientCert is set, and compressed if CompressionFormat is set. A receipt will be requested if MDNTo is set. The queued message can then be sent by invoking ProcessQueue.

AS1Sender.readReceipt Method

Reads and parses (but does not verify) an MDN receipt.

Syntax

async as1sender.readReceipt(): Promise<void>

Remarks

ReadReceipt will retrieve the file specified by MailMessageNumber from the mail server, store it in MDNReceipt and attempt to parse it as an MDN receipt. If the file is a valid MDN receipt, the class will determine the originator of the receipt and the MessageId of the original message. The originator of the receipt (your trading partner) will be stored in SendTo, the intended recipient (presumably your system) will be stored in From, and the original message Id will be stored in MessageId.

If you are not currently connected to a mail server, the class will process the receipt specified by MDNReceipt.

You should then look up the original message and set OriginalContentMIC to the value of OriginalContentMIC originally computed when the message was sent (you will need to save this information externally). You should also set ReceiptSignerCert based on the value of SendTo if necessary. Also, set MDNOptions to the value used when making the original request.

Finally, VerifyReceipt should be used to verify the receipt.

AS1Sender.reset Method

Resets the state of the control.

Syntax

async as1sender.reset(): Promise<void>

Remarks

Reset resets the state of the class. All properties will be set to their default values.

AS1Sender.selectMailMessage Method

Selects and obtains information about the specified message.

Syntax

async as1sender.selectMailMessage(): Promise<void>

Remarks

This method selects the message specified by MailMessageNumber and retrieves information about it.

After calling this method properties such as MailMessageHeaders, MailMessageDate, MailMessageFrom, etc. will be populated and allow you to determine if this message is an AS1 message. Additional properties are exposed via the Config method.

If this message is an AS1 receipt (MDN), use ReadReceipt to read it. The MDNReceipt will then be populated with the receipt, and SendTo will be populated with the email address of the originator. (From and SendTo correspond to the originator and recipient of the original AS1 transmission.) You may then set trading partner information and invoke VerifyReceipt to verify the receipt.

AS1Sender.send Method

Prepares and sends the AS1 message.

Syntax

async as1sender.send(): Promise<void>

Remarks

Invoking Send will prepare and send the AS1 message. It will be signed if SigningCert is set, encrypted if RecipientCert is set, and compressed if CompressionFormat is set. A receipt will be requested if MDNTo is set.

You should set MailServer prior to sending.

AS1Sender.setRequestHeader Method

Allows the user to set or add arbitrary HTTP request headers.

Syntax

async as1sender.setRequestHeader(headerName : string, headerValue : string): Promise<void>

Remarks

HeaderName should contain the header name, and HeaderValue should contain its value. Use this to set headers such as To, Date, etc. Note that a default value for Date will automatically be determined and this method may be used to override the default.

SetRequestHeader may be used to set any header except for the following: AS2-To, AS2-From, AS2-Version, Subject, Message-Id, Disposition-Notification-To, Disposition-Notification-Options, Receipt-Delivery-Option, Host, Content-Length.

AS1Sender.verifyReceipt Method

Verifies an MDN receipt.

Syntax

async as1sender.verifyReceipt(): Promise<void>

Remarks

VerifyReceipt verifies the receipt in MDNReceipt against the values of OriginalContentMIC and MessageId and the preferences specified in MDNOptions. The method operates similarly to Post: After the method finishes, the MDNReceipt, ReceiptSigningProtocol, and ReceiptSignerCert properties will be populated with the appropriate values.

The method operates synchronously, and will throw an exception if any errors or warnings occur. Errors might include a failure to decrypt or authenticate the receipt, the absence of an MDN when one was requested, TCP/IP errors, or any errors reported by the server in the MDN. Warnings might include the return of an unsigned receipt when a signed receipt was requested, or other warnings reported by the server in the MDN.

If an exception is thrown the error code will correspond to the severity of the warning or error, allowing client software to determine whether or not to accept the reply. If multiple errors occur, the exception will return a special error code, and the error message will contain a line for each error's code and description; i.e. "423: Failed to authenticate sender". If the error(s) is/are not fatal processing will not be interrupted, and the relevant properties will be populated as normal.

You should first invoke ReadReceipt when it is not known which message the receipt is in response to. This will allow you to determine the original MessageId and originator of the receipt before trying to verify it.

AS1Sender.ConnectionStatus Event

This event is fired to indicate changes in the connection state.

Syntax

as1sender.on('ConnectionStatus', listener: (e: {readonly connectionEvent: string, readonly statusCode: number, readonly description: string}) => void )

Remarks

The ConnectionStatus event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

Firewall connection complete.
Secure Sockets Layer (SSL) or S/Shell handshake complete (where applicable).
Remote host connection complete.
Remote host disconnected.
SSL or S/Shell connection broken.
Firewall host disconnected.
StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

AS1Sender.EndTransfer Event

Fired when the message text completes transferring.

Syntax

as1sender.on('EndTransfer', listener: (e: {}) => void )

Remarks

Fired when the message text completes transferring (on either a send or receive).

AS1Sender.Error Event

Information about errors during data delivery.

Syntax

as1sender.on('Error', listener: (e: {readonly errorCode: number, readonly description: string}) => void )

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class .

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

AS1Sender.Header Event

This event is fired for every message header being retrieved.

Syntax

as1sender.on('Header', listener: (e: {readonly field: string, readonly value: string}) => void )

Remarks

The Field parameter contains the name of the header (in the same case as it is delivered). The Value parameter contains the header contents.

If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).

AS1Sender.Log Event

Fired with log information while processing a message.

Syntax

as1sender.on('Log', listener: (e: {readonly logType: string, readonly logMessage: string, readonly logMessageB: Uint8Array}) => void )

Remarks

This event fires once for each log message generated by the class. The verbosity is controlled by the LogLevel setting.

Log messages available through this event correspond to log files written to LogDirectory. This event provides a way to obtain log messages without relying on files on disk. This event fires regardless of the value of LogDirectory (i.e. when LogDirectory is empty the event will still fire).

The LogMessage event parameter holds the raw log data.

The LogType event parameter indicates the type of log. Possible values are:

"LOG" Information about the status of the process.
"ERR" An error was encountered.
"DAT" The EDI payload.
"REQ" The raw request
"MDN" The MDN response.
"DEBUG" Debug information.
"DAT.INPUT" Debug information when processing payload. Only applicable when LogDebug is True.
"DAT.ENCRYPT" Debug information when processing payload. Only applicable when LogDebug is True.
"DAT.COMPRESS" Debug information when processing payload. Only applicable when LogDebug is True.
"DAT.SIGN" Debug information when processing payload. Only applicable when LogDebug is True.
"DAT.DECRYPT" Debug information when processing payload. Only applicable when LogDebug is True.
"DAT.DECOMPRESS" Debug information when processing payload. Only applicable when LogDebug is True.
"DAT.VERIFY" Debug information when processing payload. Only applicable when LogDebug is True.
"DAT.DEBUG" Debug information when processing payload. Only applicable when LogDebug is True.

AS1Sender.PITrail Event

Traces the commands sent to the mail server, and the respective replies.

Syntax

as1sender.on('PITrail', listener: (e: {readonly direction: number, readonly message: string}) => void )

Remarks

The PITrail event is useful for debugging purposes. It shows all the interaction between the client and the server, line by line, except for message header and body transfers.

The Message parameter contains the full text of the message. The Direction parameter shows the originator of the message:

0 (Client)The Message originates from the client.
1 (Server)The Message originates from the server.
2 (Info)The Message is an informative message originating from the client software (the class code).

AS1Sender.SSLServerAuthentication Event

Fired after the server presents its certificate to the client.

Syntax

as1sender.on('SSLServerAuthentication', listener: (e: {readonly certEncoded: string, readonly certEncodedB: Uint8Array, readonly certSubject: string, readonly certIssuer: string, readonly status: string, accept: boolean}) => void )

Remarks

This event fires with information about the server certificate. The Status property shows why verification failed (otherwise, Status contains the string OK). To manually accept an untrusted certificate, the SSLAcceptAnyServerCert setting must be set to True before initiating the connection.

AS1Sender.SSLStatus Event

Shows the progress of the secure connection.

Syntax

as1sender.on('SSLStatus', listener: (e: {readonly message: string}) => void )

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

AS1Sender.StartTransfer Event

Fired when the message text starts transferring (on either a send or receive).

Syntax

as1sender.on('StartTransfer', listener: (e: {}) => void )

Remarks

Fired when the message text starts transferring (on either a send or receive).

AS1Sender.Transfer Event

Fired while the message text gets transferred to or from MailServer .

Syntax

as1sender.on('Transfer', listener: (e: {readonly bytesTransferred: number}) => void )

Remarks

Fired while the message text gets transferred to or from MailServer.

Certificate Type

This is the digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

Fields

EffectiveDate
string (read-only)

Default Value: ""

This is the date on which this certificate becomes valid. Before this date, it is not valid. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

Encoded
string

Default Value: ""

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The and properties also may be used to specify a certificate.

When is set, a search is initiated in the current for the private key of the certificate. If the key is found, is updated to reflect the full subject of the selected certificate; otherwise, is set to an empty string.

EncodedB
Uint8Array

Default Value: ""

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The and properties also may be used to specify a certificate.

When is set, a search is initiated in the current for the private key of the certificate. If the key is found, is updated to reflect the full subject of the selected certificate; otherwise, is set to an empty string.

ExpirationDate
string (read-only)

Default Value: ""

This is the date the certificate expires. After this date, the certificate will no longer be valid. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

ExtendedKeyUsage
string

Default Value: ""

This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

Fingerprint
string (read-only)

Default Value: ""

This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

FingerprintSHA1
string (read-only)

Default Value: ""

This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

FingerprintSHA256
string (read-only)

Default Value: ""

This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

Issuer
string (read-only)

Default Value: ""

This is the issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

KeyPassword
string

Default Value: ""

This is the password for the certificate's private key (if any).

Some certificate stores may individually protect certificates' private keys, separate from the standard protection offered by the . . This field can be used to read such password-protected private keys.

Note: this property defaults to the value of . To clear it, you must set the property to the empty string (""). It can be set at any time, but when the private key's password is different from the store's password, then it must be set before calling .

PrivateKey
string (read-only)

Default Value: ""

This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The may be available but not exportable. In this case, returns an empty string.

PrivateKeyAvailable
boolean (read-only)

Default Value: False

This property shows whether a is available for the selected certificate. If is True, the certificate may be used for authentication purposes (e.g., server authentication).

PrivateKeyContainer
string (read-only)

Default Value: ""

This is the name of the container for the certificate (if available). This functionality is available only on Windows platforms.

PublicKey
string (read-only)

Default Value: ""

This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.

PublicKeyAlgorithm
string

Default Value: ""

This property contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

PublicKeyLength
number (read-only)

Default Value: 0

This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

SerialNumber
string (read-only)

Default Value: ""

This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

SignatureAlgorithm
string (read-only)

Default Value: ""

The property contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

Store
string

Default Value: "MY"

This is the name of the certificate store for the client certificate.

The property denotes the type of the certificate store specified by . If the store is password protected, specify the password in .

is used in conjunction with the property to specify client certificates. If has a value, and or is set, a search for a certificate is initiated. Please see the property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

StoreB
Uint8Array

Default Value: "MY"

This is the name of the certificate store for the client certificate.

The property denotes the type of the certificate store specified by . If the store is password protected, specify the password in .

is used in conjunction with the property to specify client certificates. If has a value, and or is set, a search for a certificate is initiated. Please see the property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

StorePassword
string

Default Value: ""

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

StoreType
CertStoreTypes

Default Value: 0

This is the type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:

0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user.

Note: This store type is not available in Java.

1 (cstMachine)For Windows, this specifies that the certificate store is a machine store.

Note: This store type is not available in Java.

2 (cstPFXFile)The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates.

Note: This store type is only available in Java.

5 (cstJKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.

Note: this store type is only available in Java.

6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).

Note: This store type is only available in Java and .NET.

22 (cstBCFKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.

Note: This store type is only available in Java and .NET.

23 (cstPKCS11)The certificate is present on a physical security key accessible via a PKCS#11 interface.

To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

When using a certificate, pass the previously saved security key information as the and set to the PIN.

Code Example. SSH Authentication with Security Key: certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Subject
string

Default Value: ""

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

FieldMeaning
CNCommon Name. This is commonly a hostname like www.server.com.
OOrganization
OUOrganizational Unit
LLocality
SState
CCountry
EEmail Address

If a field value contains a comma, it must be quoted.

SubjectAltNames
string (read-only)

Default Value: ""

This property contains comma-separated lists of alternative subject names for the certificate.

ThumbprintMD5
string (read-only)

Default Value: ""

This property contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA1
string (read-only)

Default Value: ""

This property contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA256
string (read-only)

Default Value: ""

This property contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

Usage
string

Default Value: ""

This property contains the text description of .

This value will be of one or more of the following strings and will be separated by commas:

  • Digital Signatures
  • Key Authentication
  • Key Encryption
  • Data Encryption
  • Key Agreement
  • Certificate Signing
  • Key Signing

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

UsageFlags
number

Default Value: 0

This property contains the flags that show intended use for the certificate. The value of is a combination of the following flags:

0x80Digital Signatures
0x40Key Authentication (Non-Repudiation)
0x20Key Encryption
0x10Data Encryption
0x08Key Agreement
0x04Certificate Signing
0x02Key Signing

Please see the property for a text representation of .

This functionality currently is not available when the provider is OpenSSL.

Version
string (read-only)

Default Value: ""

This property contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".

Constructors

public Certificate();

Creates a Certificate instance whose properties can be set. This is useful for use with CERTMGR when generating new certificates.

public Certificate(String certificateFile);

Opens CertificateFile and reads out the contents as an X509 public key.

public Certificate(byte[] certificateData);

Parses CertificateData as an X509 public key.

public Certificate(int certStoreType, String store, String storePassword, String subject);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X509 certificate's subject Distinguished Name (DN).

public Certificate(int certStoreType, String store, String storePassword, String subject, String configurationString);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. ConfigurationString is a newline separated list of name-value pairs that may be used to modify the default behavior. Possible values include "PersistPFXKey", which shows whether or not the PFX key is persisted after performing operations with the private key. This correlates to the PKCS12_NO_PERSIST_KEY CyrptoAPI option. The default value is True (the key is persisted). "Thumbprint" - a MD5, SHA1, or SHA256 thumbprint of the certificate to load. When specified, this value is used to select the certificate in the store. This is applicable to cstUser, cstMachine, cstPublicKeyFile, and cstPFXFile store types. "UseInternalSecurityAPI" shows whether the platform (default) or the internal security API is used when performing certificate-related operations. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X509 certificate's subject Distinguished Name (DN).

public Certificate(int certStoreType, String store, String storePassword, byte[] encoded);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will load Encoded as an X509 certificate and search the opened store for a corresponding private key.

public Certificate(int certStoreType, byte[] storeBlob, String storePassword, String subject);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. StoreBlob is a string (binary- or base64-encoded) containing the certificate data. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X509 certificate's subject Distinguished Name (DN).

public Certificate(int certStoreType, byte[] storeBlob, String storePassword, String subject, String configurationString);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. StoreBlob is a string (binary- or base64-encoded) containing the certificate data. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X509 certificate's subject Distinguished Name (DN).

public Certificate(int certStoreType, byte[] storeBlob, String storePassword, byte[] encoded);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a string (binary- or base64-encoded) containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will load Encoded as an X509 certificate and search the opened store for a corresponding private key.

EDIAttachment Type

This describes the file being attached.

Remarks

Information about the file's location that is being attached to the message is contained here.

Fields

ContentType
string

Default Value: ""

The MIME content-type of this EDIAttachment.

Data
string

Default Value: ""

This property contains the attachment data.

In a receiver, the class decodes the attachment to the property when 's value is first queried. This property will contain the full decrypted text of the attachment.

DataB
Uint8Array

Default Value: ""

This property contains the attachment data.

In a receiver, the class decodes the attachment to the property when 's value is first queried. This property will contain the full decrypted text of the attachment.

Filename
string

Default Value: ""

The file name of the attachment. If IncomingDirectory has been specified, the attachment will be written to the specified directory and the name will be provided by this property. Otherwise, this will contain the name of the attachment as described in the .

Headers
string

Default Value: ""

The class fills out each time any of the other properties for that EDIAttachment are changed. If additional headers are needed they should be appended after all the other propertys for that EDIAttachment are set.

Name
string

Default Value: ""

is the final name to be associated with the contents of either the or properties. This corresponds to the filename attribute of the Content-Disposition header for this attachment.

Constructors

public EDIAttachment();



public EDIAttachment(String filename);



public EDIAttachment(String filename, String contentType);



public EDIAttachment(String filename, String contentType, String headers);



EDIData Type

The EDI payload of the AS2 message.

Remarks

The EDI payload of the AS2 message.

Fields

Data
string

Default Value: ""

This property contains the EDI payload of the transmission.

In a receiver, this property will only be populated if IncomingDirectory and have not been specified and ParseRequest finishes without an error, setting ScanResult to 0. If so, Data will contain the full decrypted text of the EDI message.

DataB
Uint8Array

Default Value: ""

This property contains the EDI payload of the transmission.

In a receiver, this property will only be populated if IncomingDirectory and have not been specified and ParseRequest finishes without an error, setting ScanResult to 0. If so, Data will contain the full decrypted text of the EDI message.

EDIType
string

Default Value: ""

The Content-Type of the EDI message. Sample values might be "application/edi-x12", "application/edifact" or "application/xml".

Filename
string

Default Value: ""

In a sender, if is specified, the file specified will be used for the EDI payload of the transmission. will be populated with the name of the file.

In a receiver, when IncomingDirectory is set, this will be populated with the absolute path of the file which contains the processed message contents.

Note: When is set, the data will be written to the stream and this property will not be populated.

Name
string

Default Value: "rfc1767.edi"

is the final name to be associated with the contents of either the or properties. This corresponds to the filename attribute of the Content-Disposition header for the EDI payload.

When constructing EDI data to be sent, will be set to the same value as , but can be overridden after setting to indicate that another name should be used in the outbound request's Content-Disposition MIME header.

When receiving EDI data, will be read out of the "filename" attribute of the inbound request's Content-Disposition MIME header.

Constructors

public EDIData();



public EDIData(byte[] data, String EDIType);



public EDIData(String filename, String EDIType);



Firewall Type

This is the firewall the class will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall, such as the firewall and the .

Fields

AutoDetect
boolean

Default Value: False

This property tells the class whether or not to automatically detect and use firewall system settings, if available.

FirewallType
FirewallTypes

Default Value: 0

This property determines the type of firewall to connect through. The applicable values are as follows:

fwNone (0)No firewall (default setting).
fwTunnel (1)Connect through a tunneling proxy. is set to 80.
fwSOCKS4 (2)Connect through a SOCKS4 Proxy. is set to 1080.
fwSOCKS5 (3)Connect through a SOCKS5 Proxy. is set to 1080.
fwSOCKS4A (10)Connect through a SOCKS4A Proxy. is set to 1080.

Host
string

Default Value: ""

This property contains the name or IP address of firewall (optional). If a is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the class .

Password
string

Default Value: ""

This property contains a password if authentication is to be used when connecting through the firewall. If is specified, the and properties are used to connect and authenticate to the given firewall. If the authentication fails, the class .

Port
number

Default Value: 0

This property contains the transmission control protocol (TCP) port for the firewall . See the description of the property for details.

Note: This property is set automatically when is set to a valid value. See the description of the property for details.

User
string

Default Value: ""

This property contains a user name if authentication is to be used connecting through a firewall. If the is specified, this property and properties are used to connect and authenticate to the given Firewall. If the authentication fails, the class .

Constructors

public Firewall();



MDNReceipt Type

The complete MDN Receipt returned by the receiver.

Remarks

The complete MDN Receipt contains the Message Disposition Notification (MDN) and an optional signature.

Fields

Content
string

Default Value: ""

This contains the entire content of the MDN Receipt. This is a multipart/report entity consisting of a machine readable (Message Disposition Notification) and a human readable , which itself may be embedded in a multipart/signed entity if requested by the AS2 sender.

ContentB
Uint8Array

Default Value: ""

This contains the entire content of the MDN Receipt. This is a multipart/report entity consisting of a machine readable (Message Disposition Notification) and a human readable , which itself may be embedded in a multipart/signed entity if requested by the AS2 sender.

HeaderCount
number (read-only)

Default Value: 0

The number of headers in the MDN.

HeaderField
string (read-only)

Default Value: ""

The field name of the MDN header currently selected by .

HeaderIndex
number

Default Value: 0

Which MDN header is currently selected to populate and .

Valid values are 0 to - 1.

Headers
string

Default Value: ""

Headers contains all of the headers of the AS2 MDN Receipt as a single string. This will include headers such as AS2-From, AS2-To, Date, Content-Type, etc. In an AS2Sender, these will also contain the transport headers of the MDN Receipt (HTTP or SMTP headers, depending on the delivery option).

You can also use , , , and to easily iterate through each individual header.

HeaderValue
string (read-only)

Default Value: ""

The value of the MDN header currently selected by .

MDN
string (read-only)

Default Value: ""

MDN will contain the entire machine readable text of the Message Disposition Notification in the receipt. It will report either success or failure depending on the processing status of the receiver. In either case, it will be RFC-compliant.

Message
string (read-only)

Default Value: ""

The human-readable portion of the MDN receipt.

The human-readable portion of the MDN receipt that indicates the status of the message processing. This can be used to provide the user with a helpful message in the event that an error is encountered.

MICValue
string (read-only)

Default Value: ""

The Message Integrity Check(s) (one-way hash) of the original EDI message.

An MDN Receipt contains a MIC calculated over the EDI message that the receipt is in response to, to be matched on the sender side against a saved value for the original request to ensure that the integrity of the data that the receiver reports is preserved. When a signed receipt is requested, the MIC is be calculated using the algorithm used on the incoming message's signature, or SHA-1 if the incoming message is not signed.

The MIC will be base64 encoded and reported with the algorithm name as specified in RFC 3335; e.g., "w7AguNJEmhF/qIjJw6LnnA==, md5".

SigningProtocol
string (read-only)

Default Value: ""

This property contains the MIME type of the signature used, if any (i.e., "application/pkcs7-signature"), to create this MDNReceipt. It will contain an empty string if the receipt is unsigned.

Constructors

public MDNReceipt();



public MDNReceipt(String headers, byte[] content);



Config Settings (class ipworksedi.as1sender)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

AS1 Config Settings

LogFilename:   The base name of the log file.

If set, this will be used as for the filename of the log file.

Note that only the base name should be specified as the component will append the appropriate file extension.

POPPort:   The POP mail port to be used, if different than MailServer.

The mail port to be used for POP (or POP/S). For implicit SSL, use port 995.

POPServer:   The POP server to be used, if different than MailServer.

The mail server to be used for POP (or POP/S), in case different than MailServer.

SMTPAuthMechanism:   The authentication mechanism used to connect to the SMTP server.

By default, SMTPAuthMechanism is set to 0, which sends the AUTH command is SMTPUser and SMTPPassword are set. SMTPAuthMechanism can be set to 1 to use the more secure CRAM-MD5 authentication command.

SMTPPassword:   The password used for authentication.

If SMTPPassword is set to a non empty string, then when connecting to the SMTPServer an AUTH or CRAM-MD5 (depending on SMTPAuthMechanism) command is sent for user authentication.

SMTPPort:   The SMTP mail port to be used, if different than MailServer.

The mail port to be used for SMTP (or POP/S). For implicit SSL, use port 465.

SMTPServer:   The SMTP server to be used, if different than MailServer.

The mail server to be used for SMTP (or SMTP/S), in case different than MailServer.

SMTPSSLStartMode:   Determines how SSL negotiation starts with the SMTP server.

0 ssl Automatic 1 ssl Implicit 2 ssl Explicit 3 ssl None Default These modes have the same interpretation as defined by the property SSLStartMode.

SMTPUser:   The user name used for authentication.

If SMTPUser is set to a non empty string, then when connecting to the SMTPServer an AUTH or CRAM-MD5 (depending on SMTPAuthMechanism) command is sent for user authentication.

SSL Config Settings

LogSSLPackets:   Controls whether SSL packets are logged when using the internal security API.

When SSLProvider is set to Internal, this setting controls whether SSL packets should be logged. By default, this setting is False, as it is only useful for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this setting has no effect if SSLProvider is set to Platform.

OpenSSLCADir:   The path to a directory containing CA certificates.

This functionality is available only when the provider is OpenSSL.

The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g. 9d66eef0.0, 9d66eef0.1 etc). OpenSSL recommends to use the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCAFile:   Name of the file containing the list of CA's trusted by your application.

This functionality is available only when the provider is OpenSSL.

The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by

-----BEGIN CERTIFICATE-----

... (CA certificate in base64 encoding) ...

-----END CERTIFICATE-----

sequences. Before, between, and after the certificates text is allowed which can be used e.g. for descriptions of the certificates. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCipherList:   A string that controls the ciphers to be used by SSL.

This functionality is available only when the provider is OpenSSL.

The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".

OpenSSLPrngSeedData:   The data to seed the pseudo random number generator (PRNG).

This functionality is available only when the provider is OpenSSL.

By default OpenSSL uses the device file "/dev/urandom" to seed the PRNG and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.

ReuseSSLSession:   Determines if the SSL session is reused.

If set to true, the class will reuse the context if and only if the following criteria are met:

  • The target host name is the same.
  • The system cache entry has not expired (default timeout is 10 hours).
  • The application process that calls the function is the same.
  • The logon session is the same.
  • The instance of the class is the same.

SSLAcceptAnyServerCert:   Whether to trust any certificate presented by the server.

This setting disables all certificate verification when set to True. This configuration setting must be enabled to trust a self-signed certificate. It is not recommended to enable this configuration setting in a production environment. The default value is False.

SSLCACerts:   A newline separated list of CA certificate to use during SSL client authentication.

This setting specifies one or more CA certificates to be included in the request when performing SSL client authentication. Some servers require the entire chain, including CA certificates, to be presented when performing SSL client authentication. The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLCipherStrength:   The minimum cipher strength used for bulk encryption.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting.

SSLEnabledCipherSuites:   The cipher suite to be used in an SSL negotiation.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the class will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when SSLProvider is set to Platform: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=CALG_AES_256"); obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES"); Possible values when SSLProvider is set to Platform include:

  • CALG_3DES
  • CALG_3DES_112
  • CALG_AES
  • CALG_AES_128
  • CALG_AES_192
  • CALG_AES_256
  • CALG_AGREEDKEY_ANY
  • CALG_CYLINK_MEK
  • CALG_DES
  • CALG_DESX
  • CALG_DH_EPHEM
  • CALG_DH_SF
  • CALG_DSS_SIGN
  • CALG_ECDH
  • CALG_ECDH_EPHEM
  • CALG_ECDSA
  • CALG_ECMQV
  • CALG_HASH_REPLACE_OWF
  • CALG_HUGHES_MD5
  • CALG_HMAC
  • CALG_KEA_KEYX
  • CALG_MAC
  • CALG_MD2
  • CALG_MD4
  • CALG_MD5
  • CALG_NO_SIGN
  • CALG_OID_INFO_CNG_ONLY
  • CALG_OID_INFO_PARAMETERS
  • CALG_PCT1_MASTER
  • CALG_RC2
  • CALG_RC4
  • CALG_RC5
  • CALG_RSA_KEYX
  • CALG_RSA_SIGN
  • CALG_SCHANNEL_ENC_KEY
  • CALG_SCHANNEL_MAC_KEY
  • CALG_SCHANNEL_MASTER_HASH
  • CALG_SEAL
  • CALG_SHA
  • CALG_SHA1
  • CALG_SHA_256
  • CALG_SHA_384
  • CALG_SHA_512
  • CALG_SKIPJACK
  • CALG_SSL2_MASTER
  • CALG_SSL3_MASTER
  • CALG_SSL3_SHAMD5
  • CALG_TEK
  • CALG_TLS1_MASTER
  • CALG_TLS1PRF
Example values when SSLProvider is set to Internal: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA"); obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_DH_ANON_WITH_AES_128_CBC_SHA"); Possible values when SSLProvider is set to Internal include:
  • TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
  • TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
  • TLS_DH_RSA_WITH_AES_128_GCM_SHA256 (Not Recommended)
  • TLS_DH_RSA_WITH_AES_256_GCM_SHA384 (Not Recommended)
  • TLS_DH_DSS_WITH_AES_128_GCM_SHA256 (Not Recommended)
  • TLS_DH_DSS_WITH_AES_256_GCM_SHA384 (Not Recommended)
  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
  • TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_DES_CBC_SHA
  • TLS_DHE_RSA_WITH_DES_CBC_SHA
  • TLS_DHE_DSS_WITH_DES_CBC_SHA
  • TLS_RSA_WITH_RC4_128_MD5
  • TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols) only the following cipher suites are supported:

  • TLS_AES_256_GCM_SHA384
  • TLS_CHACHA20_POLY1305_SHA256
  • TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols:   Used to enable/disable the supported security protocols.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:

TLS1.312288 (Hex 3000)
TLS1.23072 (Hex C00) (Default)
TLS1.1768 (Hex 300) (Default)
TLS1 192 (Hex C0) (Default)
SSL3 48 (Hex 30) [Platform Only]
SSL2 12 (Hex 0C) [Platform Only]

SSLEnabledProtocols - TLS 1.3 Notes

In the JavaScript edition the platform implementation is used when TLS 1.3 is enabled and SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.

SSLEnabledProtocols: SSL2 and SSL3 Notes:

SSL 2.0 and 3.0 are not supported by the class when the SSLProvider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and SSLProvider needs to be set to platform.

SSLEnableRenegotiation:   Whether the renegotiation_info SSL extension is supported.

This setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This setting is true by default, but can be set to false to disable the extension.

This setting is only applicable when SSLProvider is set to Internal.

SSLIncludeCertChain:   Whether the entire certificate chain is included in the SSLServerAuthentication event.

This setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

SSLKeyLogFile:   The location of a file where per-session secrets are written for debugging purposes.

This setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the class will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffice for debugging purposes. When writing to this file the class will only append, it will not overwrite previous values.

Note: This setting is only applicable when SSLProvider is set to Internal.

SSLNegotiatedCipher:   Returns the negotiated cipher suite.

Returns the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

SSLNegotiatedCipherStrength:   Returns the negotiated cipher suite strength.

Returns the strength of the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g.TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

SSLNegotiatedCipherSuite:   Returns the negotiated cipher suite.

Returns the cipher suite negotiated during the SSL handshake represented as a single string.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherSuite[connId]");

SSLNegotiatedKeyExchange:   Returns the negotiated key exchange algorithm.

Returns the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchange[connId]");

SSLNegotiatedKeyExchangeStrength:   Returns the negotiated key exchange algorithm strength.

Returns the strenghth of the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchangeStrength[connId]");

SSLNegotiatedVersion:   Returns the negotiated protocol version.

Returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

SSLSecurityFlags:   Flags that control certificate verification.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:

0x00000001Ignore time validity status of certificate.
0x00000002Ignore time validity status of CTL.
0x00000004Ignore non-nested certificate times.
0x00000010Allow unknown Certificate Authority.
0x00000020Ignore wrong certificate usage.
0x00000100Ignore unknown certificate revocation status.
0x00000200Ignore unknown CTL signer revocation status.
0x00000400Ignore unknown Certificate Authority revocation status.
0x00000800Ignore unknown Root revocation status.
0x00008000Allow test Root certificate.
0x00004000Trust test Root certificate.
0x80000000Ignore non-matching CN (certificate CN not-matching server name).

This functionality is currently not available when the provider is OpenSSL.

SSLServerCACerts:   A newline separated list of CA certificate to use during SSL server certificate validation.

This setting optionally specifies one or more CA certificates to be used when verifying the server certificate. When verifying the server's certificate the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This setting should only be set if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

TLS12SignatureAlgorithms:   Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.

This setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the class will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the class .

The format of this value is a comma separated list of hash-signature combinations. For instance: component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups:   The supported groups for ECC.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)

TLS13KeyShareGroups:   The groups for which to pregenerate key shares.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448"
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1"
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096"
  • "ffdhe_6144"
  • "ffdhe_8192"

TLS13SignatureAlgorithms:   The allowed certificate signature algorithms.

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

  • "ed25519" (default)
  • "ed448" (default)
  • "ecdsa_secp256r1_sha256" (default)
  • "ecdsa_secp384r1_sha384" (default)
  • "ecdsa_secp521r1_sha512" (default)
  • "rsa_pkcs1_sha256" (default)
  • "rsa_pkcs1_sha384" (default)
  • "rsa_pkcs1_sha512" (default)
  • "rsa_pss_sha256" (default)
  • "rsa_pss_sha384" (default)
  • "rsa_pss_sha512" (default)
The default value is rsa_pss_sha256,rsa_pss_sha384,rsa_pss_sha512,rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512,ecdsa_secp256r1_sha256,ecdsa_secp384r1_sha384,ecdsa_secp521r1_sha512,ed25519,ed448. This setting is only applicable when SSLEnabledProtocols includes TLS 1.3.
TLS13SupportedGroups:   The supported groups for (EC)DHE key exchange.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448" (default)
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096" (default)
  • "ffdhe_6144" (default)
  • "ffdhe_8192" (default)

Base Config Settings

BuildInfo:   Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

CodePage:   The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:

IdentifierName
037IBM EBCDIC - U.S./Canada
437OEM - United States
500IBM EBCDIC - International
708Arabic - ASMO 708
709Arabic - ASMO 449+, BCON V4
710Arabic - Transparent Arabic
720Arabic - Transparent ASMO
737OEM - Greek (formerly 437G)
775OEM - Baltic
850OEM - Multilingual Latin I
852OEM - Latin II
855OEM - Cyrillic (primarily Russian)
857OEM - Turkish
858OEM - Multilingual Latin I + Euro symbol
860OEM - Portuguese
861OEM - Icelandic
862OEM - Hebrew
863OEM - Canadian-French
864OEM - Arabic
865OEM - Nordic
866OEM - Russian
869OEM - Modern Greek
870IBM EBCDIC - Multilingual/ROECE (Latin-2)
874ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875IBM EBCDIC - Modern Greek
932ANSI/OEM - Japanese, Shift-JIS
936ANSI/OEM - Simplified Chinese (PRC, Singapore)
949ANSI/OEM - Korean (Unified Hangul Code)
950ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026IBM EBCDIC - Turkish (Latin-5)
1047IBM EBCDIC - Latin 1/Open System
1140IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141IBM EBCDIC - Germany (20273 + Euro symbol)
1142IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144IBM EBCDIC - Italy (20280 + Euro symbol)
1145IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147IBM EBCDIC - France (20297 + Euro symbol)
1148IBM EBCDIC - International (500 + Euro symbol)
1149IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201Unicode UCS-2 Big-Endian
1250ANSI - Central European
1251ANSI - Cyrillic
1252ANSI - Latin I
1253ANSI - Greek
1254ANSI - Turkish
1255ANSI - Hebrew
1256ANSI - Arabic
1257ANSI - Baltic
1258ANSI/OEM - Vietnamese
1361Korean (Johab)
10000MAC - Roman
10001MAC - Japanese
10002MAC - Traditional Chinese (Big5)
10003MAC - Korean
10004MAC - Arabic
10005MAC - Hebrew
10006MAC - Greek I
10007MAC - Cyrillic
10008MAC - Simplified Chinese (GB 2312)
10010MAC - Romania
10017MAC - Ukraine
10021MAC - Thai
10029MAC - Latin II
10079MAC - Icelandic
10081MAC - Turkish
10082MAC - Croatia
12000Unicode UCS-4 Little-Endian
12001Unicode UCS-4 Big-Endian
20000CNS - Taiwan
20001TCA - Taiwan
20002Eten - Taiwan
20003IBM5550 - Taiwan
20004TeleText - Taiwan
20005Wang - Taiwan
20105IA5 IRV International Alphabet No. 5 (7-bit)
20106IA5 German (7-bit)
20107IA5 Swedish (7-bit)
20108IA5 Norwegian (7-bit)
20127US-ASCII (7-bit)
20261T.61
20269ISO 6937 Non-Spacing Accent
20273IBM EBCDIC - Germany
20277IBM EBCDIC - Denmark/Norway
20278IBM EBCDIC - Finland/Sweden
20280IBM EBCDIC - Italy
20284IBM EBCDIC - Latin America/Spain
20285IBM EBCDIC - United Kingdom
20290IBM EBCDIC - Japanese Katakana Extended
20297IBM EBCDIC - France
20420IBM EBCDIC - Arabic
20423IBM EBCDIC - Greek
20424IBM EBCDIC - Hebrew
20833IBM EBCDIC - Korean Extended
20838IBM EBCDIC - Thai
20866Russian - KOI8-R
20871IBM EBCDIC - Icelandic
20880IBM EBCDIC - Cyrillic (Russian)
20905IBM EBCDIC - Turkish
20924IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932JIS X 0208-1990 & 0121-1990
20936Simplified Chinese (GB2312)
21025IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027Extended Alpha Lowercase
21866Ukrainian (KOI8-U)
28591ISO 8859-1 Latin I
28592ISO 8859-2 Central Europe
28593ISO 8859-3 Latin 3
28594ISO 8859-4 Baltic
28595ISO 8859-5 Cyrillic
28596ISO 8859-6 Arabic
28597ISO 8859-7 Greek
28598ISO 8859-8 Hebrew
28599ISO 8859-9 Latin 5
28605ISO 8859-15 Latin 9
29001Europa 3
38598ISO 8859-8 Hebrew
50220ISO 2022 Japanese with no halfwidth Katakana
50221ISO 2022 Japanese with halfwidth Katakana
50222ISO 2022 Japanese JIS X 0201-1989
50225ISO 2022 Korean
50227ISO 2022 Simplified Chinese
50229ISO 2022 Traditional Chinese
50930Japanese (Katakana) Extended
50931US/Canada and Japanese
50933Korean Extended and Korean
50935Simplified Chinese Extended and Simplified Chinese
50936Simplified Chinese
50937US/Canada and Traditional Chinese
50939Japanese (Latin) Extended and Japanese
51932EUC - Japanese
51936EUC - Simplified Chinese
51949EUC - Korean
51950EUC - Traditional Chinese
52936HZ-GB2312 Simplified Chinese
54936Windows XP: GB18030 Simplified Chinese (4 Byte)
57002ISCII Devanagari
57003ISCII Bengali
57004ISCII Tamil
57005ISCII Telugu
57006ISCII Assamese
57007ISCII Oriya
57008ISCII Kannada
57009ISCII Malayalam
57010ISCII Gujarati
57011ISCII Punjabi
65000Unicode UTF-7
65001Unicode UTF-8
The following is a list of valid code page identifiers for Mac OS only:
IdentifierName
1ASCII
2NEXTSTEP
3JapaneseEUC
4UTF8
5ISOLatin1
6Symbol
7NonLossyASCII
8ShiftJIS
9ISOLatin2
10Unicode
11WindowsCP1251
12WindowsCP1252
13WindowsCP1253
14WindowsCP1254
15WindowsCP1250
21ISO2022JP
30MacOSRoman
10UTF16String
0x90000100UTF16BigEndian
0x94000100UTF16LittleEndian
0x8c000100UTF32String
0x98000100UTF32BigEndian
0x9c000100UTF32LittleEndian
65536Proprietary

LicenseInfo:   Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a class is using. It will return the following information:

  • Product: The product the license is for.
  • Product Key: The key the license was generated from.
  • License Source: Where the license was found (e.g., RuntimeLicense, License File).
  • License Type: The type of license installed (e.g., Royalty Free, Single Server).
  • Last Valid Build: The last valid build number for which the license will work.
MaskSensitive:   Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.

This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseInternalSecurityAPI:   Whether or not to use the system security libraries or an internal implementation.

When set to false, the class will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to true tells the class to use the internal implementation instead of using the system security libraries.

This setting is set to false by default on all platforms.

Trappable Errors (class ipworksedi.as1sender)

AS1Sender Errors

501   Unable to parse the receipt.
502   The receipt is signed with an unsupported signature format (details follow).
511   Unsupported compression algorithm requested.
521   A Message Integrity Check was requested, but not provided in the MDN.
522   The Message Integrity Check returned in the MDN is incorrect.
523   Unable to parse Message Integrity Check.
524   Unrequested hashing algorithm used (check MDNOptions).
525   The Message ID returned in the MDN does not match.
531   The receipt was unsigned, and a signed receipt was expected.
532   The receipt signature could not be verified.
533   An MDN was expected, but was not returned.
600   Failure reported in MDN: Unsupported signing protocol.
601   Failure reported in MDN: Unsupported MIC algorithms.
602   Failure reported in MDN: Other (details follow).
611   Error reported in MDN: Decryption failed.
612   Error reported in MDN: Authentication failed.
613   Error reported in MDN: Could not verify content integrity.
614   Error reported in MDN: Unexpected processing error.
615   Error reported in MDN: Other (details follow).
621   Warning reported in MDN: Authentication failed, processing continued by receiver.
622   Warning reported in MDN: Other (details follow).
831   I/O Error (details follow).

POP Errors

116   MailPort cannot be zero. Please specify a valid service port number.
118   Firewall error. Error message contains detailed description.
171   POP protocol error. Description contains the server reply.
172   Error communicating with server. Error text is attached.
173   Please specify a valid MailServer.
174   Busy executing current method.

TCPClient Errors

100   You cannot change the RemotePort at this time. A connection is in progress.
101   You cannot change the RemoteHost (Server) at this time. A connection is in progress.
102   The RemoteHost address is invalid (0.0.0.0).
104   Already connected. If you want to reconnect, close the current connection first.
106   You cannot change the LocalPort at this time. A connection is in progress.
107   You cannot change the LocalHost at this time. A connection is in progress.
112   You cannot change MaxLineLength at this time. A connection is in progress.
116   RemotePort cannot be zero. Please specify a valid service port number.
117   You cannot change the UseConnection option while the class is active.
135   Operation would block.
201   Timeout.
211   Action impossible in control's present state.
212   Action impossible while not connected.
213   Action impossible while listening.
301   Timeout.
302   Could not open file.
434   Unable to convert string to selected CodePage.
1105   Already connecting. If you want to reconnect, close the current connection first.
1117   You need to connect first.
1119   You cannot change the LocalHost at this time. A connection is in progress.
1120   Connection dropped by remote host.

TCP/IP Errors

10004   [10004] Interrupted system call.
10009   [10009] Bad file number.
10013   [10013] Access denied.
10014   [10014] Bad address.
10022   [10022] Invalid argument.
10024   [10024] Too many open files.
10035   [10035] Operation would block.
10036   [10036] Operation now in progress.
10037   [10037] Operation already in progress.
10038   [10038] Socket operation on non-socket.
10039   [10039] Destination address required.
10040   [10040] Message too long.
10041   [10041] Protocol wrong type for socket.
10042   [10042] Bad protocol option.
10043   [10043] Protocol not supported.
10044   [10044] Socket type not supported.
10045   [10045] Operation not supported on socket.
10046   [10046] Protocol family not supported.
10047   [10047] Address family not supported by protocol family.
10048   [10048] Address already in use.
10049   [10049] Can't assign requested address.
10050   [10050] Network is down.
10051   [10051] Network is unreachable.
10052   [10052] Net dropped connection or reset.
10053   [10053] Software caused connection abort.
10054   [10054] Connection reset by peer.
10055   [10055] No buffer space available.
10056   [10056] Socket is already connected.
10057   [10057] Socket is not connected.
10058   [10058] Can't send after socket shutdown.
10059   [10059] Too many references, can't splice.
10060   [10060] Connection timed out.
10061   [10061] Connection refused.
10062   [10062] Too many levels of symbolic links.
10063   [10063] File name too long.
10064   [10064] Host is down.
10065   [10065] No route to host.
10066   [10066] Directory not empty
10067   [10067] Too many processes.
10068   [10068] Too many users.
10069   [10069] Disc Quota Exceeded.
10070   [10070] Stale NFS file handle.
10071   [10071] Too many levels of remote in path.
10091   [10091] Network subsystem is unavailable.
10092   [10092] WINSOCK DLL Version out of range.
10093   [10093] Winsock not loaded yet.
11001   [11001] Host not found.
11002   [11002] Non-authoritative 'Host not found' (try again or check DNS setup).
11003   [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP.
11004   [11004] Valid name, no data record (check DNS setup).

SMTP Errors

118   Firewall Error. Error message contains detailed description.
161   SMTP protocol error. Description contains the server reply.
162   Error communicating with server. Error text is attached.
163   Please specify a MailServer.
164   Please specify a sender (From).
165   Please specify a recipient.
166   Busy executing current method.
301   Operation interrupted.
302   Can't open AttachedFile.

TCPClient Errors

100   You cannot change the RemotePort at this time. A connection is in progress.
101   You cannot change the RemoteHost (Server) at this time. A connection is in progress.
102   The RemoteHost address is invalid (0.0.0.0).
104   Already connected. If you want to reconnect, close the current connection first.
106   You cannot change the LocalPort at this time. A connection is in progress.
107   You cannot change the LocalHost at this time. A connection is in progress.
112   You cannot change MaxLineLength at this time. A connection is in progress.
116   RemotePort cannot be zero. Please specify a valid service port number.
117   You cannot change the UseConnection option while the class is active.
135   Operation would block.
201   Timeout.
211   Action impossible in control's present state.
212   Action impossible while not connected.
213   Action impossible while listening.
301   Timeout.
302   Could not open file.
434   Unable to convert string to selected CodePage.
1105   Already connecting. If you want to reconnect, close the current connection first.
1117   You need to connect first.
1119   You cannot change the LocalHost at this time. A connection is in progress.
1120   Connection dropped by remote host.

TCP/IP Errors

10004   [10004] Interrupted system call.
10009   [10009] Bad file number.
10013   [10013] Access denied.
10014   [10014] Bad address.
10022   [10022] Invalid argument.
10024   [10024] Too many open files.
10035   [10035] Operation would block.
10036   [10036] Operation now in progress.
10037   [10037] Operation already in progress.
10038   [10038] Socket operation on non-socket.
10039   [10039] Destination address required.
10040   [10040] Message too long.
10041   [10041] Protocol wrong type for socket.
10042   [10042] Bad protocol option.
10043   [10043] Protocol not supported.
10044   [10044] Socket type not supported.
10045   [10045] Operation not supported on socket.
10046   [10046] Protocol family not supported.
10047   [10047] Address family not supported by protocol family.
10048   [10048] Address already in use.
10049   [10049] Can't assign requested address.
10050   [10050] Network is down.
10051   [10051] Network is unreachable.
10052   [10052] Net dropped connection or reset.
10053   [10053] Software caused connection abort.
10054   [10054] Connection reset by peer.
10055   [10055] No buffer space available.
10056   [10056] Socket is already connected.
10057   [10057] Socket is not connected.
10058   [10058] Can't send after socket shutdown.
10059   [10059] Too many references, can't splice.
10060   [10060] Connection timed out.
10061   [10061] Connection refused.
10062   [10062] Too many levels of symbolic links.
10063   [10063] File name too long.
10064   [10064] Host is down.
10065   [10065] No route to host.
10066   [10066] Directory not empty
10067   [10067] Too many processes.
10068   [10068] Too many users.
10069   [10069] Disc Quota Exceeded.
10070   [10070] Stale NFS file handle.
10071   [10071] Too many levels of remote in path.
10091   [10091] Network subsystem is unavailable.
10092   [10092] WINSOCK DLL Version out of range.
10093   [10093] Winsock not loaded yet.
11001   [11001] Host not found.
11002   [11002] Non-authoritative 'Host not found' (try again or check DNS setup).
11003   [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP.
11004   [11004] Valid name, no data record (check DNS setup).

SMIME Errors

10191   Invalid index (RecipientIndex).
10192   Message decoding error (code).
10193   Unexpected message type.
10194   Unsupported hashing/signing algorithm.
10195   The message does not have any signers.
10196   The message signature could not be verified.
10197   Could not locate a suitable decryption certificate.
10198   The signer certificate could not be found.
10199   No signing certificate was supplied for signing the message.
10201   The specified certificate was not the one required.
10202   The specified certificate could not be found.
10221   Could not acquire CSP.
10222   Type validation error.
10223   Unsupported key size.
10224   Unrecognized Content-Type object identifier.
10225   Unrecognized public key format.
10226   No choices specified.
10228   Must specify output stream.
10280   Invalid part index.
10281   Unknown MIME type.
10283   No MIME-boundary found.
10280   Error decoding certificate.