AS4Client Control

Properties   Methods   Events   Config Settings   Errors  

The AS4Client control connects to a server to send or receive files.

Syntax

AS4Client

Remarks

The AS4Client component may be used to send or receive files from a server. The component will connect to a server and either send files (push), or request files to download (pull).

Sending Files

SendFiles sends the files specified by EDIData to URL.

Before calling this method set AgreementRef to the agreement identifier used by both parties. Set AS4From and AS4To. Set EDIData specifies the file(s) to be sent. To encrypt the data set RecipientCerts. To sign the data set SigningCert. The SignerCert property should be set to verify the signed receipt.

When this method is called the file(s) will be sent and any returned receipts will be verified.

To indicate a synchronous receipt is expected set ReceiptReplyMode to rrmSync. The following properties are applicable when calling this method with an agreement specifying a synchronous receipt (a receipt provided in the response):

• AgreementRef
• AS4From
• AS4To
• EDIData
• URL
• RecipientCerts (required to encrypt)
• SignerCert (required to verify signed receipts)
• SigningCert (required to sign files)
• ConversationId (optional)
• EncryptionAlgorithm (optional)
• LogDirectory (optional)
• MessageId (optional)
• MessageProperties (optional)
• Profile (optional)
• ReceiptReplyMode
• Service (optional)
• ServiceType (optional)
• SignatureAlgorithm (optional)

SendFiles Example (synchronous receipt): client.Profile = As4clientProfiles.ebpfENTSOG; //Specify the agreement and party information client.AgreementRef = "http://agreements.company.com/sign_and_encrypt"; client.AS4From.Role = "Sender"; client.AS4From.Id = "org:b2b:example:company:A"; client.AS4To.Role = "Receiver"; client.AS4To.Id = "org:b2b:example:company:B"; //Configure the component to expect a synchronous receipt. client.ReceiptReplyMode = As4clientReceiptReplyModes.rrmSync; //Company A's private certificate. Used to sign the outgoing message and files. client.SigningCert = new Certificate(CertStoreTypes.cstPFXFile, "C:\\files\\CompanyA.pfx", "password", "*"); //Company B's public certificate. Used to encrypt the outgoing file. client.RecipientCerts.Add(new Certificate("C:\\files\\as4\\CompanyB.cer")); //Company B's public certificate. Used to verify the signed receipt. client.SignerCert = new Certificate("C:\\files\\as4\\CompanyB.cer"); client.URL = "http://www.company.com:9090/msh"; EBData data = new EBData(); data.EDIType = "application/edi-x12"; data.Filename = "C:\\files\\myfile.x12"; data.Name = "myfile.x12"; client.EDIData.Add(data); //Send file(s) and verify the receipt. client.SendFiles();

The control also supports asynchronous receipts. In this configuration a file is sent from the control to another party, but the receipt is not returned in the response. Instead the other party sends the receipt at a later time. The AS4Server control may be used inside a web page to receive the asynchronous receipt. After receiving the receipt either AS4Server or AS4Client may be used to verify the receipt.

Details about the original message must be stored so that the receipt can be correlated with the message and properly verified. The easiest way to do this is to set AsyncReceiptInfoDir before calling SendFiles. The control will automatically store the required information.

See the VerifyReceipt method of AS4Server for details about verifying asynchronous receipts.

To indicate an asynchronous receipt is expected set ReceiptReplyMode to rrmAsync. The following properties are applicable when calling this method with an agreement specifying a synchronous receipt (a receipt provided in the response):

• AgreementRef
• AS4From
• AS4To
• AsyncReceiptInfoDir
• EDIData
• URL
• RecipientCerts (required to encrypt)
• SignerCert (required to verify signed receipts)
• SigningCert (required to sign files)
• ConversationId (optional)
• EncryptionAlgorithm (optional)
• LogDirectory (optional)
• MessageId (optional)
• MessageProperties (optional)
• OriginalSOAPMessage (optional)
• OriginalSOAPMessageId (optional)
• Profile (optional)
• ReceiptReplyMode
• Service (optional)
• ServiceType (optional)
• SignatureAlgorithm (optional)

SendFiles Example (asynchronous receipt): client.Profile = As4clientProfiles.ebpfENTSOG; //Specify the agreement and party information client.AgreementRef = "http://agreements.company.com/sign_and_encrypt_async"; client.AS4From.Role = "Sender"; client.AS4From.Id = "org:b2b:example:company:A"; client.AS4To.Role = "Receiver"; client.AS4To.Id = "org:b2b:example:company:B"; //Configure the component to expect a synchronous receipt. client.ReceiptReplyMode = As4clientReceiptReplyModes.rrmAsync; client.AsyncReceiptInfoDir = "C:\\async_info"; //Company A's private certificate. Used to sign the outgoing message and files. client.SigningCert = new Certificate(CertStoreTypes.cstPFXFile, "C:\\files\\CompanyA.pfx", "password", "*"); //Company B's public certificate. Used to encrypt the outgoing files. client.RecipientCerts.Add(new Certificate("C:\\files\\as4\\CompanyB.cer")); //Company B's public certificate. Used to verify the signed receipt. client.SignerCert = new Certificate("C:\\files\\as4\\CompanyB.cer"); client.URL = "http://www.company.com:9090/msh"; EBData data = new EBData(); data.EDIType = "application/edi-x12"; data.Filename = "C:\\files\\myfile.x12"; data.Name = "myfile.x12"; client.EDIData.Add(data); //Send file(s). client.SendFiles();

At this point the file(s) have been sent, but a receipt has not yet been received. AS4Server can be used within a web site to listen for the receipt. //**** Inside a web site **** As4server server = new As4server; server.ReadRequest(); if (!String.IsNullOrEmpty(server.IncomingReceipt.Content)) { server.AsyncReceiptInfoDir = "C:\\async_info"; server.VerifyReceipt(); //The receipt is now verified }

Receiving Files

ReceiveFiles establishes a connection to the server specified by URL and receives files.

The MPC specifies the Message Partition Channel from which messages will be received. The server will reply with files from this channel. If IncomingDirectory is set before calling this method the files will be written to the specified folder, otherwise inspect EDIData to obtain the received file data. The following properties are applicable when calling this method:

• SigningCert (required to sign the request)
• Certificate (required for decryption)
• SignerCert (required for signature verification)
• URL
• IncomingDirectory (optional)
• LogDirectory
• MPC
• TokenUser
• TokenPassword
• TokenPasswordType

After calling this method the following properties will be populated and may be inspected:

• AS4From
• AS4To
• AgreementRef
• ConversationId
• Service
• ServiceAction
• ServiceType
• MessageId
• Receipt

The Receipt property will be populated with the receipt corresponding to the received message, but it is not yet delivered. The receipt may be delivered by bundling it with another request to receive files, or by calling SendReceipt.

To bundle the receipt with a subsequent ReceiveFiles call the Receipt property must hold the receipt. If the same instance of the control is being used this is already true since Receipt is populated automatically after receiving the file. To use another instance of the control for multiple calls to ReceiveFiles be sure to save the Receipt's ReceiptContent and ReceiptRefToMessageId values for later use.

ReceiveFiles Example: client.Profile = As4clientProfiles.ebpfENTSOG; //Company A's private certificate. Used for signing the request. client.SigningCert = new Certificate(CertStoreTypes.cstPFXFile, "C:\\files\\as4\\CompanyA.pfx", "password", "*"); //Company A's private certificate. Used for decrypting the file. client.Certificate = new Certificate(CertStoreTypes.cstPFXFile, "C:\\files\\as4\\CompanyA.pfx", "password", "*"); //Company B's public certificate. Used for signature verification. client.SignerCert = new Certificate("C:\\files\\as4\\CompanyB.cer"); client.URL = "http://www.company.com:9090/msh"; //Message Channel id client.MPC = "mpc_a"; client.IncomingDirectory = "C:\\incoming_dir"; client.ReceiveFiles(); //Inspect client.AgreementRef and other properties for information about the received files Console.WriteLine(client.AgreementRef); Console.WriteLine(client.AS4From.Id); Console.WriteLine(client.AS4To.Id); Console.WriteLine(client.ConversationId); //Save the receipt for later use string receiptContent = client.Receipt.Content; string receiptRefId = client.Receipt.RefToMessageId;

At this stage the receipt data is saved. Later when making another call to ReceiveFiles and populate the Receipt property with this receipt data. When ReceiveFiles is called again, the receipt for the previous message will be included with the request. client.Receipt = new EBReceipt(receiptRefId, receiptContent); client.ReceiveFiles(); //This will now include the bundled receipt

Sending Asynchronous Receipts

SendReceipt sends an asynchronous receipt to the URL.

This method is typically used in conjunction with AS4Server to send an asynchronous receipt after receiving a message. The receipt will be created at the time of the incoming request, then saved for later use. When the receipt is to be sent populate Receipt and call this method.

//Send an asynchronous receipt client.URL = ""http://www.company.com:9090/msh""; client.Receipt = new EBReceipt(server.Receipt.RefToMessageId, server.Receipt.Content); client.ReceiptReplyMode = As4clientReceiptReplyModes.rrmAsync; client.SendReceipt();

Property List

---

The following is the full list of the properties of the control with short descriptions. Click on the links for further details.

Method List

---

The following is the full list of the methods of the control with short descriptions. Click on the links for further details.

Event List

---

The following is the full list of the events fired by the control with short descriptions. Click on the links for further details.

Config Settings

---

The following is a list of config settings for the control with short descriptions. Click on the links for further details.

AgreementRef Property (AS4Client Control)

The agreement reference.

Syntax

as4clientcontrol.AgreementRef[=string]

Default Value

""

Remarks

This property holds a value identifying the agreement between the two parties. The agreement is made outside the scope of the request and response and governs details about the interaction including reply mode, signing and encryption options, etc.

The value of this property should be set to a mutually agreed upon identifier. Both parties will use this value know what the expected requirements are for a particular request or response.

The format of this value is typically a URI, such as "http://mycompany.com/agreement_01" but can be any unique string that both parties are configured to accept. Another common format is the concatenation of the AS4From and AS4To values.

This value corresponds to the ebMS element "eb:Messaging/eb:UserMessage/eb:CollaborationInfo/eb:AgreementRef"

Data Type

String

AS4FromId Property (AS4Client Control)

The Id of the party.

Syntax

as4clientcontrol.AS4FromId[=string]

Default Value

""

Remarks

The Id of the party. This value is required.

This value corresponds to the ebMS element "eb:Messaging/eb:UserMessage/eb:PartyInfo/eb:From/eb:PartyId"

Data Type

String

AS4FromIdType Property (AS4Client Control)

The optional type of the Id.

Syntax

as4clientcontrol.AS4FromIdType[=string]

Default Value

""

Remarks

The optional type of the Id. If specified this value should be the domain to which the Id belongs.

This value corresponds to the ebMS element "eb:Messaging/eb:UserMessage/eb:PartyInfo/eb:From/eb:PartyId@type"

Data Type

String

AS4FromRole Property (AS4Client Control)

This property specifies the role of the party.

Syntax

as4clientcontrol.AS4FromRole[=string]

Default Value

""

Remarks

This property specifies the role of the party. This may be any value agreed upon by the trading partners.

In AS4From this specified the role of the party sending the document. The default value is "http://docs.oasis-open.org/ebxml-msg/ebms/v3.0/ns/core/200704/initiator".

In AS4To this specifies the role of the party receiving the document. The default value is "http://docs.oasis-open.org/ebxml-msg/ebms/v3.0/ns/core/200704/responder".

This value corresponds to the ebMS element "eb:Messaging/eb:UserMessage/eb:PartyInfo/eb:From/eb:Role"

Data Type

String

AS4ToId Property (AS4Client Control)

The Id of the party.

Syntax

as4clientcontrol.AS4ToId[=string]

Default Value

""

Remarks

The Id of the party. This value is required.

This value corresponds to the ebMS element "eb:Messaging/eb:UserMessage/eb:PartyInfo/eb:From/eb:PartyId"

Data Type

String

AS4ToIdType Property (AS4Client Control)

The optional type of the Id.

Syntax

as4clientcontrol.AS4ToIdType[=string]

Default Value

""

Remarks

The optional type of the Id. If specified this value should be the domain to which the Id belongs.

This value corresponds to the ebMS element "eb:Messaging/eb:UserMessage/eb:PartyInfo/eb:From/eb:PartyId@type"

Data Type

String

AS4ToRole Property (AS4Client Control)

This property specifies the role of the party.

Syntax

as4clientcontrol.AS4ToRole[=string]

Default Value

""

Remarks

This property specifies the role of the party. This may be any value agreed upon by the trading partners.

In AS4From this specified the role of the party sending the document. The default value is "http://docs.oasis-open.org/ebxml-msg/ebms/v3.0/ns/core/200704/initiator".

In AS4To this specifies the role of the party receiving the document. The default value is "http://docs.oasis-open.org/ebxml-msg/ebms/v3.0/ns/core/200704/responder".

This value corresponds to the ebMS element "eb:Messaging/eb:UserMessage/eb:PartyInfo/eb:From/eb:Role"

Data Type

String

AsyncReceiptInfoDir Property (AS4Client Control)

A directory to hold information used for asynchronous receipt verification.

Syntax

as4clientcontrol.AsyncReceiptInfoDir[=string]

Default Value

""

Remarks

This setting specifies a directory which holds information about the original message that was sent.

When sending files and requesting asynchronous receipts set this directory to a location where data can be stored. When the receipt is later received this property should be set so original message information can be read in order to verify the receipt.

As an alternative the original message information may be manually stored by saving the values of OriginalSOAPMessage and OriginalSOAPMessageId after sending a file. In this case OriginalSOAPMessage and OriginalSOAPMessageId should be populated before verifying the receipt.

See the VerifyReceipt method of AS4Server for more details about verifying asynchronous receipts.

Data Type

String

CertStore Property (AS4Client Control)

The name of the certificate store for the client certificate.

Syntax

as4clientcontrol.CertStore[=string]

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The CertStoreType property denotes the type of the certificate store specified by CertStore. If the store is password-protected, specify the password in CertStorePassword.

CertStore is used in conjunction with the CertSubject property to specify client certificates. If CertStore has a value, and CertSubject or CertEncoded is set, a search for a certificate is initiated. Please see the CertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .CertStoreB.

Data Type

Binary String

CertStorePassword Property (AS4Client Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

as4clientcontrol.CertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

CertStoreType Property (AS4Client Control)

The type of certificate store for this certificate.

Syntax

as4clientcontrol.CertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

CertSubject Property (AS4Client Control)

The subject of the certificate used for client authentication.

Syntax

as4clientcontrol.CertSubject[=string]

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

CertEncoded Property (AS4Client Control)

The certificate (PEM/Base64 encoded).

Syntax

as4clientcontrol.CertEncoded[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The CertStore and CertSubject properties also may be used to specify a certificate.

When CertEncoded is set, a search is initiated in the current CertStore for the private key of the certificate. If the key is found, CertSubject is updated to reflect the full subject of the selected certificate; otherwise, CertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .CertEncodedB.

This property is not available at design time.

Data Type

Binary String

CompressionFormat Property (AS4Client Control)

The compression format (if any) to use.

Syntax

as4clientcontrol.CompressionFormat[=integer]

Possible Values

ebcfNone(0), 
ebcfGZIP(1)

Default Value

0

Remarks

This setting specifies the compression format to be applied to the parts specified by EDIData. When Profile is set to Standard the default value is 0 (ebcfNone). When Profile is set to ENTSOG or eDelivery the default value is 1 (ebcfGZIP).

Possible values are:

• 0 (ebcfNone - default for Standard)
• 1 (ebcfGZIP - default for ENTSOG and eDelivery)

Note: When Profile is set to Standard the first EDIData part will be included in the SOAP body if the EDIEDIType is "text/xml" or "application/xml". In that case since the data is included in the SOAP body it will not be compressed. When Profile is set to ENTSOG all EDIData parts are compressed.

Data Type

Integer

ConversationId Property (AS4Client Control)

The Conversation Id of the message.

Syntax

as4clientcontrol.ConversationId[=string]

Default Value

""

Remarks

This property specifies an Id that may be used to identify a set of related messages. This is required and if a value is not specified one will automatically be created.

Note: When Profile is set to ebpfENTSOG this value will always be empty.

This value corresponds to the ebMS element "eb:Messaging/eb:UserMessage/eb:CollaborationInfo/eb:ConversationId"

Data Type

String

CookieCount Property (AS4Client Control)

The number of records in the Cookie arrays.

Syntax

as4clientcontrol.CookieCount[=integer]

Default Value

0

Remarks

This property controls the size of the following arrays:

• CookieDomain
• CookieExpiration
• CookieName
• CookiePath
• CookieSecure
• CookieValue

The array indices start at 0 and end at CookieCount - 1.

This property is not available at design time.

Data Type

Integer

CookieDomain Property (AS4Client Control)

The domain of a received cookie.

Syntax

as4clientcontrol.CookieDomain(CookieIndex)

Default Value

""

Remarks

The domain of a received cookie. This property contains a domain name to limit the cookie to (if provided by the server). If the server does not provide a domain name, this property will contain an empty string. The convention in this case is to use the server name specified by URLServer as the cookie domain.

The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.

This property is read-only and not available at design time.

Data Type

String

CookieExpiration Property (AS4Client Control)

An expiration time for the cookie (if provided by the server).

Syntax

as4clientcontrol.CookieExpiration(CookieIndex)

Default Value

""

Remarks

An expiration time for the cookie (if provided by the server). The time format used is "Weekday, DD-Mon-YY HH:MM:SS GMT". If the server does not provide an expiration time, this property will contain an empty string. The convention is to drop the cookie at the end of the session.

The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.

This property is read-only and not available at design time.

Data Type

String

CookieName Property (AS4Client Control)

The name of the cookie.

Syntax

as4clientcontrol.CookieName(CookieIndex)[=string]

Default Value

""

Remarks

The name of the cookie.

This property, along with CookieValue, stores the cookie that is to be sent to the server. The SetCookie event displays the cookies sent by the server and their properties.

The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.

This property is not available at design time.

Data Type

String

CookiePath Property (AS4Client Control)

A path name to limit the cookie to (if provided by the server).

Syntax

as4clientcontrol.CookiePath(CookieIndex)

Default Value

""

Remarks

A path name to limit the cookie to (if provided by the server). If the server does not provide a cookie path, the path property will be an empty string. The convention in this case is to use the path specified by URLPath as the cookie path.

The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.

This property is read-only and not available at design time.

Data Type

String

CookieSecure Property (AS4Client Control)

The security flag of the received cookie.

Syntax

as4clientcontrol.CookieSecure(CookieIndex)

Default Value

False

Remarks

The security flag of the received cookie. This property specifies whether the cookie is secure. If the value of this property is True, the cookie value must be submitted only through a secure (HTTPS) connection.

The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.

This property is read-only and not available at design time.

Data Type

Boolean

CookieValue Property (AS4Client Control)

The value of the cookie.

Syntax

as4clientcontrol.CookieValue(CookieIndex)[=string]

Default Value

""

Remarks

The value of the cookie. A corresponding value is associated with the cookie specified by CookieName. This property holds that value.

The SetCookie event provides the cookies set by the server.

The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.

This property is not available at design time.

Data Type

String

EDIDataCount Property (AS4Client Control)

The number of records in the EDI arrays.

Syntax

as4clientcontrol.EDIDataCount[=integer]

Default Value

0

Remarks

This property controls the size of the following arrays:

• EDIData
• EDIEDIType
• EDIFileName
• EDIName
• EDIPropertyCount
• EDIPropertyIndex
• EDIPropertyName
• EDIPropertyValue
• EDISchemaLocation
• EDISchemaNamespace
• EDISchemaVersion

The array indices start at 0 and end at EDIDataCount - 1.

This property is not available at design time.

Data Type

Integer

EDIData Property (AS4Client Control)

This property contains the EDI payload of the transmission.

Syntax

as4clientcontrol.EDIData(EDIDataIndex)[=string]

Default Value

""

Remarks

This property contains the EDI payload of the transmission.

When sending files this may be specified to the data to be sent. This can be used as an alternative to setting EDIFileName.

When receiving files this will only be populated if IncomingDirectory and EDIOutputStream have not been specified and ParseRequest finishes without an error. If so, Data will contain the full decrypted text of the EDI message.

This property defines the EDI data to be sent. This may include multiple files.

The EDIDataIndex parameter specifies the index of the item in the array. The size of the array is controlled by the EDIDataCount property.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .EDIDataB.

This property is not available at design time.

Data Type

Binary String

EDIEDIType Property (AS4Client Control)

The Content-Type of the EDI message.

Syntax

as4clientcontrol.EDIEDIType(EDIDataIndex)[=string]

Default Value

""

Remarks

The Content-Type of the EDI message. Sample values are "application/edi-x12", "application/edifact" or "application/xml".

The EDIDataIndex parameter specifies the index of the item in the array. The size of the array is controlled by the EDIDataCount property.

This property is not available at design time.

Data Type

String

EDIFileName Property (AS4Client Control)

When sending, if FileName is specified, the file specified will be used for the EDI payload of the transmission.

Syntax

as4clientcontrol.EDIFileName(EDIDataIndex)[=string]

Default Value

""

Remarks

When sending, if EDIFileName is specified, the file specified will be used for the EDI payload of the transmission. EDIName will be populated with the name of the file.

When receiving, if IncomingDirectory is set, this will be populated with the name of the file which contains the processed message contents.

Note: When EDIOutputStream is set, the data will be written to the stream and this property will not be populated.

The EDIDataIndex parameter specifies the index of the item in the array. The size of the array is controlled by the EDIDataCount property.

This property is not available at design time.

Data Type

String

EDIName Property (AS4Client Control)

Name is the final name to be associated with the contents of either the Data or FileName properties.

Syntax

as4clientcontrol.EDIName(EDIDataIndex)[=string]

Default Value

"rfc1767.edi"

Remarks

EDIName is the final name to be associated with the contents of either the EDIData or EDIFileName properties. This corresponds to the filename attribute of the Content-Disposition header for the EDI payload.

When constructing EDI data to be sent, EDIName will be set to the same value as EDIFileName, but can be overridden after setting EDIFileName to indicate that another name should be used in the outbound request's Content-Disposition MIME header.

When receiving EDI data, EDIName will be read out of the "filename" attribute of the inbound request's Content-Disposition MIME header.

The EDIDataIndex parameter specifies the index of the item in the array. The size of the array is controlled by the EDIDataCount property.

This property is not available at design time.

Data Type

String

EDIPropertyCount Property (AS4Client Control)

The number of properties for this file.

Syntax

as4clientcontrol.EDIPropertyCount(EDIDataIndex)[=integer]

Default Value

0

Remarks

The number of properties for this file.

Each file may contain zero or more properties associated with it. This property, in conjunction with EDIPropertyIndex, EDIPropertyName, and EDIPropertyValue can be used to specify properties when sending and read properties when receiving.

Sending

When sending files to add properties set EDIPropertyCount to specify the number of properties. Then set EDIPropertyIndex to select the property. Set EDIPropertyName and EDIPropertyValue to define the values for the property at EDIPropertyIndex. For instance: data = new EBData(); data.EDIType = "image/jpeg"; data.FileName = "..\\1.jpg"; data.Name = "1.jpg"; data.PropertyCount = 2; //Define two properties data.PropertyIndex = 0; //Select the first property data.PropertyName = "name1"; data.PropertyValue = "value1"; data.PropertyIndex = 1; //Select the second property data.PropertyName = "name2"; data.PropertyValue = "value2";

Receiving

When receiving files these properties may be queried to retrieve the values set by the sender. Inspect EDIPropertyCount to obtain the number of properties. Next set EDIPropertyIndex to select a property and query EDIPropertyName and EDIPropertyValue. For instance:

for (int i = 0; i < server.EDIData[0].PropertyCount;i++) { server.EDIData[0].PropertyIndex = i; Console.WriteLine(server.EDIData[0].PropertyName + ": " + server.EDIData[0].PropertyValue); }

The EDIDataIndex parameter specifies the index of the item in the array. The size of the array is controlled by the EDIDataCount property.

This property is not available at design time.

Data Type

Integer

EDIPropertyIndex Property (AS4Client Control)

Selects a property at the specified index.

Syntax

as4clientcontrol.EDIPropertyIndex(EDIDataIndex)[=integer]

Default Value

0

Remarks

Selects a property at the specified index.

The EDIDataIndex parameter specifies the index of the item in the array. The size of the array is controlled by the EDIDataCount property.

This property is not available at design time.

Data Type

Integer

EDIPropertyName Property (AS4Client Control)

The name of the property.

Syntax

as4clientcontrol.EDIPropertyName(EDIDataIndex)[=string]

Default Value

""

Remarks

The name of the property.

The EDIDataIndex parameter specifies the index of the item in the array. The size of the array is controlled by the EDIDataCount property.

This property is not available at design time.

Data Type

String

EDIPropertyValue Property (AS4Client Control)

The value of the property.

Syntax

as4clientcontrol.EDIPropertyValue(EDIDataIndex)[=string]

Default Value

""

Remarks

The value of the property.

The EDIDataIndex parameter specifies the index of the item in the array. The size of the array is controlled by the EDIDataCount property.

This property is not available at design time.

Data Type

String

EDISchemaLocation Property (AS4Client Control)

The SchemaLocation , SchemaNamespace , and SchemaVersion optionally define the schema that applies to this particular file.

Syntax

as4clientcontrol.EDISchemaLocation(EDIDataIndex)[=string]

Default Value

""

Remarks

The EDISchemaLocation, EDISchemaNamespace, and EDISchemaVersion optionally define the schema that applies to this particular file. This may be used by the receiving party to properly interpret the file data.

Schema information is not required, but if schema information is included EDISchemaLocation is required and must be set to the URI of the schema.

This value corresponds to the ebMS element "eb:Messaging/eb:UserMessage/eb:PayloadInfo/eb:PartInfo/eb:Schema@location"

The EDIDataIndex parameter specifies the index of the item in the array. The size of the array is controlled by the EDIDataCount property.

This property is not available at design time.

Data Type

String

EDISchemaNamespace Property (AS4Client Control)

The namespace of the schema.

Syntax

as4clientcontrol.EDISchemaNamespace(EDIDataIndex)[=string]

Default Value

""

Remarks

The namespace of the schema. This property is optional. Refer to EDISchemaLocation for details.

This value corresponds to the ebMS element "eb:Messaging/eb:UserMessage/eb:PayloadInfo/eb:PartInfo/eb:Schema@namespace"

The EDIDataIndex parameter specifies the index of the item in the array. The size of the array is controlled by the EDIDataCount property.

This property is not available at design time.

Data Type

String

EDISchemaVersion Property (AS4Client Control)

The version of the schema.

Syntax

as4clientcontrol.EDISchemaVersion(EDIDataIndex)[=string]

Default Value

""

Remarks

The version of the schema. This property is optional. Refer to EDISchemaLocation for details.

This value corresponds to the ebMS element "eb:Messaging/eb:UserMessage/eb:PayloadInfo/eb:PartInfo/eb:Schema@namespace"

The EDIDataIndex parameter specifies the index of the item in the array. The size of the array is controlled by the EDIDataCount property.

This property is not available at design time.

Data Type

String

EncryptionAlgorithm Property (AS4Client Control)

The algorithm used to encrypt the EDI data.

Syntax

as4clientcontrol.EncryptionAlgorithm[=string]

Default Value

"AES128GCM"

Remarks

If RecipientCerts contains a valid certificate, the data will be encrypted using this certificate and the algorithm specified in EncryptionAlgorithm. If EncryptionAlgorithm is set to the empty string, the data will not be encrypted.

The control supports "3DES", or industry-standard 168-bit Triple-DES encryption.

The control supports "AES" encryption with a default keysize of 128 bits. You may also set "AESCBC192" or "AESCBC256" for 192- and 256-bit keysizes.

Possible values are:

• 3DES
• DES
• AESCBC128
• AESCBC192
• AESCBC256
• AES128GCM (default)
• AES192GCM
• AES256GCM

Data Type

String

ErrorCount Property (AS4Client Control)

The number of records in the Error arrays.

Syntax

as4clientcontrol.ErrorCount[=integer]

Default Value

0

Remarks

This property controls the size of the following arrays:

• ErrorCategory
• ErrorCode
• ErrorDescription
• ErrorDetail
• ErrorOrigin
• ErrorRefMessageId
• ErrorSeverity
• ErrorShortDescription

The array indices start at 0 and end at ErrorCount - 1.

This property is not available at design time.

Data Type

Integer

ErrorCategory Property (AS4Client Control)

The category of error.

Syntax

as4clientcontrol.ErrorCategory(ErrorIndex)[=string]

Default Value

""

Remarks

The category of error. Typical values include "Content", "Packaging", "UnPackaging", "Communication", and "InternalProcess". This value is optional.

The ErrorIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ErrorCount property.

This property is not available at design time.

Data Type

String

ErrorCode Property (AS4Client Control)

The error code.

Syntax

as4clientcontrol.ErrorCode(ErrorIndex)[=string]

Default Value

""

Remarks

The error code. This value is required. The standard format is "EBMS:0001", where "0001" is the numeric code portion.

The ErrorIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ErrorCount property.

This property is not available at design time.

Data Type

String

ErrorDescription Property (AS4Client Control)

The description of the error.

Syntax

as4clientcontrol.ErrorDescription(ErrorIndex)[=string]

Default Value

""

Remarks

The description of the error. This value is optional.

The ErrorIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ErrorCount property.

This property is not available at design time.

Data Type

String

ErrorDetail Property (AS4Client Control)

Additional details about the error.

Syntax

as4clientcontrol.ErrorDetail(ErrorIndex)[=string]

Default Value

""

Remarks

Additional details about the error. This may include other helpful information such as a stack trace. This value is optional.

The ErrorIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ErrorCount property.

This property is not available at design time.

Data Type

String

ErrorOrigin Property (AS4Client Control)

The module within which the error occurred.

Syntax

as4clientcontrol.ErrorOrigin(ErrorIndex)[=string]

Default Value

""

Remarks

The module within which the error occurred. Typical values include "ebMS", "reliability", and "security". This value is optional.

The ErrorIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ErrorCount property.

This property is not available at design time.

Data Type

String

ErrorRefMessageId Property (AS4Client Control)

The MessageId to which the error applies.

Syntax

as4clientcontrol.ErrorRefMessageId(ErrorIndex)[=string]

Default Value

""

Remarks

The MessageId to which the error applies. This is optional but should be supplied if possible.

The ErrorIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ErrorCount property.

This property is not available at design time.

Data Type

String

ErrorSeverity Property (AS4Client Control)

The severity of the error.

Syntax

as4clientcontrol.ErrorSeverity(ErrorIndex)[=integer]

Possible Values

ebstWarning(0), 
ebstFailure(1)

Default Value

0

Remarks

The severity of the error. Possible values are:

• 0 (ebstWarning - default)
• 1 (ebstFailure)

This value is required.

The ErrorIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ErrorCount property.

This property is not available at design time.

Data Type

Integer

ErrorShortDescription Property (AS4Client Control)

A short description of the error.

Syntax

as4clientcontrol.ErrorShortDescription(ErrorIndex)[=string]

Default Value

""

Remarks

A short description of the error. This may be helpful for logging or readability. This value is optional.

The ErrorIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ErrorCount property.

This property is not available at design time.

Data Type

String

FirewallAutoDetect Property (AS4Client Control)

Whether to automatically detect and use firewall system settings, if available.

Syntax

as4clientcontrol.FirewallAutoDetect[=boolean]

Default Value

False

Remarks

Whether to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (AS4Client Control)

The type of firewall to connect through.

Syntax

as4clientcontrol.FirewallType[=integer]

Possible Values

fwNone(0), 
fwTunnel(1), 
fwSOCKS4(2), 
fwSOCKS5(3), 
fwSOCKS4A(10)

Default Value

0

Remarks

The type of firewall to connect through. The applicable values are as follows:

Data Type

Integer

FirewallHost Property (AS4Client Control)

The name or IP address of the firewall (optional).

Syntax

as4clientcontrol.FirewallHost[=string]

Default Value

""

Remarks

The name or IP address of the firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the control fails with an error.

Data Type

String

FirewallPassword Property (AS4Client Control)

A password if authentication is to be used when connecting through the firewall.

Syntax

as4clientcontrol.FirewallPassword[=string]

Default Value

""

Remarks

A password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the control fails with an error.

Data Type

String

FirewallPort Property (AS4Client Control)

The Transmission Control Protocol (TCP) port for the firewall Host .

Syntax

as4clientcontrol.FirewallPort[=integer]

Default Value

0

Remarks

The Transmission Control Protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (AS4Client Control)

A username if authentication is to be used when connecting through a firewall.

Syntax

as4clientcontrol.FirewallUser[=string]

Default Value

""

Remarks

A username if authentication is to be used when connecting through a firewall. If FirewallHost is specified, this property and the FirewallPassword property are used to connect and authenticate to the given Firewall. If the authentication fails, the control fails with an error.

Data Type

String

IncomingDirectory Property (AS4Client Control)

The directory to which incoming files are saved.

Syntax

as4clientcontrol.IncomingDirectory[=string]

Default Value

""

Remarks

If IncomingDirectory is set, the received files will be stored in the specified directory. If a filename is specified in the EDI message, the component will write to the specified filename, otherwise, a filename will be automatically generated based on a timestamp of the incoming transmission. In either case, if the filename exists on disk, the data will be written to the same name with a "-duplicate?" appended to the filename, where "?" is the number of duplicates.

This property is optional, if not set file data will be stored in EDIData.

Data Type

String

LocalHost Property (AS4Client Control)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

as4clientcontrol.LocalHost[=string]

Default Value

""

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the control initiate connections (or accept in the case of server controls) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the control is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

LogDirectory Property (AS4Client Control)

The path to a directory for logging.

Syntax

as4clientcontrol.LogDirectory[=string]

Default Value

""

Remarks

Setting LogDirectory will instruct the component to log the details of each transmission to unique files in the specified directory. For each request processed, the control will log the complete text of the outgoing request and the incoming response.

The control will write multiple log files for each transmission, with separate extensions for each type of data:

One or more of these log files may be disabled by setting the LogOptions configuration setting. LogDirectory supports several macros that can be used to specify a unique directory path. If the path specified does not already exist, the control will attempt to create the directory. The following macros are supported:

The filenames will be chosen automatically by the control. Each filename will be the system time, in the format YYYY-MM-DD-HH-MM-SS-MMMM, with extensions "-2", "-3", used in case files of those names already exist. After each transaction is processed LogFile will contain the name of the files just written, minus the extension.

If logs cannot be written an exception will be thrown.

Data Type

String

LogFile Property (AS4Client Control)

The log file written.

Syntax

as4clientcontrol.LogFile

Default Value

""

Remarks

If LogDirectory is specified a log file will be written in the specified directory and LogFile will contain the full path and name of the files written, minus the extension.

The control will write multiple log files for each transmission, with separate extensions for each type of data:

One or more of these log files may be disabled by setting the LogOptions configuration setting. LogDirectory supports several macros that can be used to specify a unique directory path. If the path specified does not already exist, the control will attempt to create the directory. The following macros are supported:

The filenames will be chosen automatically by the control. Each filename will be the system time, in the format YYYY-MM-DD-HH-MM-SS-MMMM, with extensions "-2", "-3", used in case files of those names already exist. After each transaction is processed LogFile will contain the name of the files just written, minus the extension.

If logs cannot be written an exception will be thrown.

This property is read-only.

Data Type

String

MessageId Property (AS4Client Control)

The unique Id of the message.

Syntax

as4clientcontrol.MessageId[=string]

Default Value

""

Remarks

This property defines the unique Id of the message. When sending files the control will automatically generate a value in the format "GUID@nsoftware". When receiving files the Id will be populated with the value read from the message.

In most cases there is no need to set this value, however if a file needs to be retransmitted using the same message Id for reliability this may be set. In AS4Client this may be set before calling SendFiles. In AS4Server this may be set after calling ReadRequest and before calling SendResponse.

This property is not available at design time.

Data Type

String

MessagePropertyCount Property (AS4Client Control)

The number of records in the MessageProperty arrays.

Syntax

as4clientcontrol.MessagePropertyCount[=integer]

Default Value

0

Remarks

This property controls the size of the following arrays:

• MessagePropertyName
• MessagePropertyPropertyType
• MessagePropertyValue

The array indices start at 0 and end at MessagePropertyCount - 1.

This property is not available at design time.

Data Type

Integer

MessagePropertyName Property (AS4Client Control)

This property defines the name of the message property.

Syntax

as4clientcontrol.MessagePropertyName(MessagePropertyIndex)[=string]

Default Value

""

Remarks

This property defines the name of the message property. This is required.

This value corresponds to the ebMS element "eb:Messaging/eb:UserMessage/eb:MessageProperties/eb:Property/@Name"

The MessagePropertyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessagePropertyCount property.

This property is not available at design time.

Data Type

String

MessagePropertyPropertyType Property (AS4Client Control)

The optional type of the message property.

Syntax

as4clientcontrol.MessagePropertyPropertyType(MessagePropertyIndex)[=string]

Default Value

""

Remarks

The optional type of the message property.

This value corresponds to the ebMS element "eb:Messaging/eb:UserMessage/eb:MessageProperties/eb:Property/@Type"

The MessagePropertyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessagePropertyCount property.

This property is not available at design time.

Data Type

String

MessagePropertyValue Property (AS4Client Control)

The value of the message property.

Syntax

as4clientcontrol.MessagePropertyValue(MessagePropertyIndex)[=string]

Default Value

""

Remarks

The value of the message property.

This value corresponds to the ebMS element "eb:Messaging/eb:UserMessage/eb:MessageProperties/eb:Property/"

The MessagePropertyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessagePropertyCount property.

This property is not available at design time.

Data Type

String

MPC Property (AS4Client Control)

The MPC (Message Partition Channel) from which to receive files.

Syntax

as4clientcontrol.MPC[=string]

Default Value

""

Remarks

This property specifies the MPC (Message Partition Channel) from which to receive files. This must be set before calling ReceiveFiles. The value specified here must be known to the other party.

When left unspecified this indicates the default MPC.

This value corresponds to the ebMS element "eb:Messaging/eb:SignalMessage/eb:PullRequest/@mpc"

Data Type

String

OriginalSOAPMessage Property (AS4Client Control)

The original SOAP message used to verify the receipt.

Syntax

as4clientcontrol.OriginalSOAPMessage[=string]

Default Value

""

Remarks

OriginalSOAPMessage and OriginalSOAPMessageId may be used as an alternative to AsyncReceiptInfoDir when verifying receipts.

If AsyncReceiptInfoDir is not set when the original message is sent, these values will be populated after the send and the values should be saved.

Before verifying the receipt set these properties to their original values.

This property is not available at design time.

Data Type

String

OriginalSOAPMessageId Property (AS4Client Control)

The original SOAP message Id used to verify the receipt.

Syntax

as4clientcontrol.OriginalSOAPMessageId[=string]

Default Value

""

Remarks

OriginalSOAPMessage and OriginalSOAPMessageId may be used as an alternative to AsyncReceiptInfoDir when verifying receipts.

If AsyncReceiptInfoDir is not set when the original message is sent, these values will be populated after the send and the values should be saved.

Before verifying the receipt set these properties to their original values.

This property is not available at design time.

Data Type

String

Profile Property (AS4Client Control)

The AS4 profile.

Syntax

as4clientcontrol.Profile[=integer]

Possible Values

ebpfStandard(0), 
ebpfENTSOG(1), 
ebpfEDelivery(2), 
ebpfBDEW(3), 
ebpfENTSOG_V4(4), 
ebpfEDelivery_V2(5)

Default Value

0

Remarks

This property specifies the AS4 profile to use. Different profiles may have different requirements and default options. Setting this property to the correct value ensures that the right options are selected in order to conform to the profile. Possible values are:

When Profile is set to ebpfENTSOG the following settings are automatically applied:

When Profile is set to ebpfENTSOG_V4, version 4 of the ENTSOG profile is used and the following settings are automatically applied:

When Profile is set to ebpfEDelivery the following settings are automatically applied:

When Profile is set to ebpfEDelivery_V2, version 2 of the eDelivery profile is used and the following settings are automatically applied:

When Profile is set to ebpfBDEW the following settings are automatically applied:

Note: When ebpfBDEW is selected, both the SigningCert and Encryption Cert(recipientCert) MUST use ECDSA with the BrainpoolP256r1 curve.

Data Type

Integer

ProxyAuthScheme Property (AS4Client Control)

The type of authorization to perform when connecting to the proxy.

Syntax

as4clientcontrol.ProxyAuthScheme[=integer]

Possible Values

authBasic(0), 
authDigest(1), 
authProprietary(2), 
authNone(3), 
authNtlm(4), 
authNegotiate(5)

Default Value

0

Remarks

The type of authorization to perform when connecting to the proxy. This is used only when the ProxyUser and ProxyPassword properties are set.

ProxyAuthScheme should be set to authNone (3) when no authentication is expected.

By default, ProxyAuthScheme is authBasic (0), and if the ProxyUser and ProxyPassword properties are set, the control will attempt basic authentication.

If ProxyAuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If ProxyAuthScheme is set to authProprietary (2), then the authorization token will not be generated by the control. Look at the configuration file for the control being used to find more information about manually setting this token.

If ProxyAuthScheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of ProxyUser and ProxyPassword.

Data Type

Integer

ProxyAutoDetect Property (AS4Client Control)

Whether to automatically detect and use proxy system settings, if available.

Syntax

as4clientcontrol.ProxyAutoDetect[=boolean]

Default Value

False

Remarks

Whether to automatically detect and use proxy system settings, if available. The default value is .

Data Type

Boolean

ProxyPassword Property (AS4Client Control)

A password if authentication is to be used for the proxy.

Syntax

as4clientcontrol.ProxyPassword[=string]

Default Value

""

Remarks

A password if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

ProxyPort Property (AS4Client Control)

The Transmission Control Protocol (TCP) port for the proxy Server (default 80).

Syntax

as4clientcontrol.ProxyPort[=integer]

Default Value

80

Remarks

The Transmission Control Protocol (TCP) port for the proxy ProxyServer (default 80). See the description of the ProxyServer property for details.

Data Type

Integer

ProxyServer Property (AS4Client Control)

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

Syntax

as4clientcontrol.ProxyServer[=string]

Default Value

""

Remarks

If a proxy ProxyServer is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the ProxyServer property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the ProxyServer property is set to the corresponding address. If the search is not successful, an error is returned.

Data Type

String

ProxySSL Property (AS4Client Control)

When to use a Secure Sockets Layer (SSL) for the connection to the proxy.

Syntax

as4clientcontrol.ProxySSL[=integer]

Possible Values

psAutomatic(0), 
psAlways(1), 
psNever(2), 
psTunnel(3)

Default Value

0

Remarks

When to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

Data Type

Integer

ProxyUser Property (AS4Client Control)

A username if authentication is to be used for the proxy.

Syntax

as4clientcontrol.ProxyUser[=string]

Default Value

""

Remarks

A username if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

ReceiptContent Property (AS4Client Control)

The content of the receipt.

Syntax

as4clientcontrol.ReceiptContent[=string]

Default Value

""

Remarks

The content of the receipt. This is the raw XML of the receipt.

The control will automatically create the receipt, and verify the receipt, depending on the method called. In most cases this is simply informational and may be stored for logging purposes if desired.

Data Type

String

ReceiptRefToMessageId Property (AS4Client Control)

The Message Id to which this receipt applies.

Syntax

as4clientcontrol.ReceiptRefToMessageId[=string]

Default Value

""

Remarks

The Message Id to which this receipt applies. This is the original Message Id from the initial transmission of the file. This allows the receipt to be correlated with the original transmission.

The control will automatically create the receipt, and verify the receipt, depending on the method called. In most cases this is simply informational and may be stored for logging purposes if desired.

Data Type

String

ReceiptReplyMode Property (AS4Client Control)

The expected receipt reply mode.

Syntax

as4clientcontrol.ReceiptReplyMode[=integer]

Possible Values

rrmSync(0), 
rrmAsync(1), 
rrmNone(2)

Default Value

0

Remarks

This setting tells the control how to expect or deliver a receipt. Possible values are:

It is important to always set this property to the correct value in both AS4Client and AS4Server, whether sending or receiving, so the control can build a valid message. This should be set to the previously agreed upon value between the parties in the agreement identified by AgreementRef

Data Type

Integer

RecipientCertCount Property (AS4Client Control)

The number of records in the RecipientCert arrays.

Syntax

as4clientcontrol.RecipientCertCount[=integer]

Default Value

0

Remarks

This property controls the size of the following arrays:

• RecipientCertEncoded

The array indices start at 0 and end at RecipientCertCount - 1.

This property is not available at design time.

Data Type

Integer

RecipientCertEncoded Property (AS4Client Control)

The certificate (PEM/Base64 encoded).

Syntax

as4clientcontrol.RecipientCertEncoded(RecipientCertIndex)[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The RecipientCertStore and RecipientCertSubject properties also may be used to specify a certificate.

When RecipientCertEncoded is set, a search is initiated in the current RecipientCertStore for the private key of the certificate. If the key is found, RecipientCertSubject is updated to reflect the full subject of the selected certificate; otherwise, RecipientCertSubject is set to an empty string.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .RecipientCertEncodedB.

This property is not available at design time.

Data Type

Binary String

RefToMessageId Property (AS4Client Control)

Specifies the RefToMessageId in the message.

Syntax

as4clientcontrol.RefToMessageId[=string]

Default Value

""

Remarks

This property specifies the RefToMessageId value in the message being sent.

This property is only applicable when Profile is set to ebpfEDelivery. The eDelivery profile supports the Two-Way/Push-and-Push MEP (Message Exchange Pattern), where sending a file can be in reference to a previously received file. In this case RefToMessageId specifies the Id of the previously received message to which this send is in reference.

When sending with AS4Client this should only be set when using the eDelivery profile and need to explicitly specify the RefToMessageId value as per the Two-Way/Push-And-Push MEP.

When receiving with AS4Server this may be read after receiving a message.

Data Type

String

RolloverCertStore Property (AS4Client Control)

The name of the certificate store for the client certificate.

Syntax

as4clientcontrol.RolloverCertStore[=string]

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The RolloverCertStoreType property denotes the type of the certificate store specified by RolloverCertStore. If the store is password-protected, specify the password in RolloverCertStorePassword.

RolloverCertStore is used in conjunction with the RolloverCertSubject property to specify client certificates. If RolloverCertStore has a value, and RolloverCertSubject or RolloverCertEncoded is set, a search for a certificate is initiated. Please see the RolloverCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .RolloverCertStoreB.

Data Type

Binary String

RolloverCertStorePassword Property (AS4Client Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

as4clientcontrol.RolloverCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

RolloverCertStoreType Property (AS4Client Control)

The type of certificate store for this certificate.

Syntax

as4clientcontrol.RolloverCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

RolloverCertSubject Property (AS4Client Control)

The subject of the certificate used for client authentication.

Syntax

as4clientcontrol.RolloverCertSubject[=string]

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

RolloverCertEncoded Property (AS4Client Control)

The certificate (PEM/Base64 encoded).

Syntax

as4clientcontrol.RolloverCertEncoded[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The RolloverCertStore and RolloverCertSubject properties also may be used to specify a certificate.

When RolloverCertEncoded is set, a search is initiated in the current RolloverCertStore for the private key of the certificate. If the key is found, RolloverCertSubject is updated to reflect the full subject of the selected certificate; otherwise, RolloverCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .RolloverCertEncodedB.

This property is not available at design time.

Data Type

Binary String

RolloverSigningCertStore Property (AS4Client Control)

The name of the certificate store for the client certificate.

Syntax

as4clientcontrol.RolloverSigningCertStore[=string]

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The RolloverSigningCertStoreType property denotes the type of the certificate store specified by RolloverSigningCertStore. If the store is password-protected, specify the password in RolloverSigningCertStorePassword.

RolloverSigningCertStore is used in conjunction with the RolloverSigningCertSubject property to specify client certificates. If RolloverSigningCertStore has a value, and RolloverSigningCertSubject or RolloverSigningCertEncoded is set, a search for a certificate is initiated. Please see the RolloverSigningCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .RolloverSigningCertStoreB.

Data Type

Binary String

RolloverSigningCertStorePassword Property (AS4Client Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

as4clientcontrol.RolloverSigningCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

RolloverSigningCertStoreType Property (AS4Client Control)

The type of certificate store for this certificate.

Syntax

as4clientcontrol.RolloverSigningCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

RolloverSigningCertSubject Property (AS4Client Control)

The subject of the certificate used for client authentication.

Syntax

as4clientcontrol.RolloverSigningCertSubject[=string]

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

RolloverSigningCertEncoded Property (AS4Client Control)

The certificate (PEM/Base64 encoded).

Syntax

as4clientcontrol.RolloverSigningCertEncoded[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The RolloverSigningCertStore and RolloverSigningCertSubject properties also may be used to specify a certificate.

When RolloverSigningCertEncoded is set, a search is initiated in the current RolloverSigningCertStore for the private key of the certificate. If the key is found, RolloverSigningCertSubject is updated to reflect the full subject of the selected certificate; otherwise, RolloverSigningCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .RolloverSigningCertEncodedB.

This property is not available at design time.

Data Type

Binary String

Service Property (AS4Client Control)

The service which acts on the message.

Syntax

as4clientcontrol.Service[=string]

Default Value

"http://docs.oasis-open.org/ebxml-msg/as4/200902/service"

Remarks

This property specifies the service which acts on the message. This should only be changed from the default value if there is a specific reason to do so.

This value corresponds to the ebMS element "eb:Messaging/eb:UserMessage/eb:CollaborationInfo/eb:Service"

Data Type

String

ServiceAction Property (AS4Client Control)

The action within a service that acts on the message.

Syntax

as4clientcontrol.ServiceAction[=string]

Default Value

"http://docs.oasis-open.org/ebxml-msg/as4/200902/action"

Remarks

This property defines the action within a service that acts upon a message. This should only be changed from the default value if there is a specific reason to do so.

This value corresponds to the ebMS element "eb:Messaging/eb:UserMessage/eb:CollaborationInfo/eb:Action".

Data Type

String

ServiceType Property (AS4Client Control)

The type of service.

Syntax

as4clientcontrol.ServiceType[=string]

Default Value

""

Remarks

This optionally specifies the type of the service. The semantics of this value should be agreed upon by both parties ahead of time. It may be used to tell the other party how to interpret the Service value.

This value corresponds to the ebMS element "eb:Messaging/eb:UserMessage/eb:CollaborationInfo/eb:Service@type"

Data Type

String

SignatureAlgorithm Property (AS4Client Control)

Signature algorithm to be used in the message.

Syntax

as4clientcontrol.SignatureAlgorithm[=string]

Default Value

"sha-256"

Remarks

Signature Algorithm can be set to indicate the preferred signing algorithm. Possible values are:

• SHA1
• MD5
• SHA-256 (or SHA256) (default)
• SHA-384 (or SHA384)
• SHA-512 (or SHA512)
• SHA-224 (or SHA224)
• ECDSA-SHA1
• ECDSA-SHA224
• ECDSA-SHA256
• ECDSA-SHA384
• ECDSA-SHA512
• EDDSA-ED25519
• EDDSA-ED448

The default value is "SHA-256".

Data Type

String

SignerCertStore Property (AS4Client Control)

The name of the certificate store for the client certificate.

Syntax

as4clientcontrol.SignerCertStore[=string]

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SignerCertStoreType property denotes the type of the certificate store specified by SignerCertStore. If the store is password-protected, specify the password in SignerCertStorePassword.

SignerCertStore is used in conjunction with the SignerCertSubject property to specify client certificates. If SignerCertStore has a value, and SignerCertSubject or SignerCertEncoded is set, a search for a certificate is initiated. Please see the SignerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SignerCertStoreB.

Data Type

Binary String

SignerCertStorePassword Property (AS4Client Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

as4clientcontrol.SignerCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SignerCertStoreType Property (AS4Client Control)

The type of certificate store for this certificate.

Syntax

as4clientcontrol.SignerCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SignerCertSubject Property (AS4Client Control)

The subject of the certificate used for client authentication.

Syntax

as4clientcontrol.SignerCertSubject[=string]

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SignerCertEncoded Property (AS4Client Control)

The certificate (PEM/Base64 encoded).

Syntax

as4clientcontrol.SignerCertEncoded[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SignerCertStore and SignerCertSubject properties also may be used to specify a certificate.

When SignerCertEncoded is set, a search is initiated in the current SignerCertStore for the private key of the certificate. If the key is found, SignerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SignerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SignerCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SigningCertStore Property (AS4Client Control)

The name of the certificate store for the client certificate.

Syntax

as4clientcontrol.SigningCertStore[=string]

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SigningCertStoreType property denotes the type of the certificate store specified by SigningCertStore. If the store is password-protected, specify the password in SigningCertStorePassword.

SigningCertStore is used in conjunction with the SigningCertSubject property to specify client certificates. If SigningCertStore has a value, and SigningCertSubject or SigningCertEncoded is set, a search for a certificate is initiated. Please see the SigningCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SigningCertStoreB.

Data Type

Binary String

SigningCertStorePassword Property (AS4Client Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

as4clientcontrol.SigningCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SigningCertStoreType Property (AS4Client Control)

The type of certificate store for this certificate.

Syntax

as4clientcontrol.SigningCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SigningCertSubject Property (AS4Client Control)

The subject of the certificate used for client authentication.

Syntax

as4clientcontrol.SigningCertSubject[=string]

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SigningCertEncoded Property (AS4Client Control)

The certificate (PEM/Base64 encoded).

Syntax

as4clientcontrol.SigningCertEncoded[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SigningCertStore and SigningCertSubject properties also may be used to specify a certificate.

When SigningCertEncoded is set, a search is initiated in the current SigningCertStore for the private key of the certificate. If the key is found, SigningCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SigningCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SigningCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLAcceptServerCertEffectiveDate Property (AS4Client Control)

The date on which this certificate becomes valid.

Syntax

as4clientcontrol.SSLAcceptServerCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExpirationDate Property (AS4Client Control)

The date on which the certificate expires.

Syntax

as4clientcontrol.SSLAcceptServerCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExtendedKeyUsage Property (AS4Client Control)

A comma-delimited list of extended key usage identifiers.

Syntax

as4clientcontrol.SSLAcceptServerCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprint Property (AS4Client Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

as4clientcontrol.SSLAcceptServerCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA1 Property (AS4Client Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

as4clientcontrol.SSLAcceptServerCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA256 Property (AS4Client Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

as4clientcontrol.SSLAcceptServerCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLAcceptServerCertIssuer Property (AS4Client Control)

The issuer of the certificate.

Syntax

as4clientcontrol.SSLAcceptServerCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKey Property (AS4Client Control)

The private key of the certificate (if available).

Syntax

as4clientcontrol.SSLAcceptServerCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLAcceptServerCertPrivateKey may be available but not exportable. In this case, SSLAcceptServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKeyAvailable Property (AS4Client Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

as4clientcontrol.SSLAcceptServerCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLAcceptServerCertPrivateKey is available for the selected certificate. If SSLAcceptServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLAcceptServerCertPrivateKeyContainer Property (AS4Client Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

as4clientcontrol.SSLAcceptServerCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLAcceptServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKey Property (AS4Client Control)

The public key of the certificate.

Syntax

as4clientcontrol.SSLAcceptServerCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyAlgorithm Property (AS4Client Control)

The textual description of the certificate's public key algorithm.

Syntax

as4clientcontrol.SSLAcceptServerCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyLength Property (AS4Client Control)

The length of the certificate's public key (in bits).

Syntax

as4clientcontrol.SSLAcceptServerCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertSerialNumber Property (AS4Client Control)

The serial number of the certificate encoded as a string.

Syntax

as4clientcontrol.SSLAcceptServerCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLAcceptServerCertSignatureAlgorithm Property (AS4Client Control)

The text description of the certificate's signature algorithm.

Syntax

as4clientcontrol.SSLAcceptServerCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertStore Property (AS4Client Control)

The name of the certificate store for the client certificate.

Syntax

as4clientcontrol.SSLAcceptServerCertStore[=string]

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLAcceptServerCertStoreType property denotes the type of the certificate store specified by SSLAcceptServerCertStore. If the store is password-protected, specify the password in SSLAcceptServerCertStorePassword.

SSLAcceptServerCertStore is used in conjunction with the SSLAcceptServerCertSubject property to specify client certificates. If SSLAcceptServerCertStore has a value, and SSLAcceptServerCertSubject or SSLAcceptServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLAcceptServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLAcceptServerCertStoreB.

Data Type

Binary String

SSLAcceptServerCertStorePassword Property (AS4Client Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

as4clientcontrol.SSLAcceptServerCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLAcceptServerCertStoreType Property (AS4Client Control)

The type of certificate store for this certificate.

Syntax

as4clientcontrol.SSLAcceptServerCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLAcceptServerCertSubjectAltNames Property (AS4Client Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

as4clientcontrol.SSLAcceptServerCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintMD5 Property (AS4Client Control)

The MD5 hash of the certificate.

Syntax

as4clientcontrol.SSLAcceptServerCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA1 Property (AS4Client Control)

The SHA-1 hash of the certificate.

Syntax

as4clientcontrol.SSLAcceptServerCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA256 Property (AS4Client Control)

The SHA-256 hash of the certificate.

Syntax

as4clientcontrol.SSLAcceptServerCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsage Property (AS4Client Control)

The text description of UsageFlags .

Syntax

as4clientcontrol.SSLAcceptServerCertUsage

Default Value

""

Remarks

The text description of SSLAcceptServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsageFlags Property (AS4Client Control)

The flags that show intended use for the certificate.

Syntax

as4clientcontrol.SSLAcceptServerCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLAcceptServerCertUsageFlags is a combination of the following flags:

Please see the SSLAcceptServerCertUsage property for a text representation of SSLAcceptServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertVersion Property (AS4Client Control)

The certificate's version number.

Syntax

as4clientcontrol.SSLAcceptServerCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLAcceptServerCertSubject Property (AS4Client Control)

The subject of the certificate used for client authentication.

Syntax

as4clientcontrol.SSLAcceptServerCertSubject[=string]

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLAcceptServerCertEncoded Property (AS4Client Control)

The certificate (PEM/Base64 encoded).

Syntax

as4clientcontrol.SSLAcceptServerCertEncoded[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLAcceptServerCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLCertEffectiveDate Property (AS4Client Control)

The date on which this certificate becomes valid.

Syntax

as4clientcontrol.SSLCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLCertExpirationDate Property (AS4Client Control)

The date on which the certificate expires.

Syntax

as4clientcontrol.SSLCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLCertExtendedKeyUsage Property (AS4Client Control)

A comma-delimited list of extended key usage identifiers.

Syntax

as4clientcontrol.SSLCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLCertFingerprint Property (AS4Client Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

as4clientcontrol.SSLCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLCertFingerprintSHA1 Property (AS4Client Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

as4clientcontrol.SSLCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLCertFingerprintSHA256 Property (AS4Client Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

as4clientcontrol.SSLCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLCertIssuer Property (AS4Client Control)

The issuer of the certificate.

Syntax

as4clientcontrol.SSLCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLCertPrivateKey Property (AS4Client Control)

The private key of the certificate (if available).

Syntax

as4clientcontrol.SSLCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLCertPrivateKey may be available but not exportable. In this case, SSLCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLCertPrivateKeyAvailable Property (AS4Client Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

as4clientcontrol.SSLCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLCertPrivateKey is available for the selected certificate. If SSLCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLCertPrivateKeyContainer Property (AS4Client Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

as4clientcontrol.SSLCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLCertPublicKey Property (AS4Client Control)

The public key of the certificate.

Syntax

as4clientcontrol.SSLCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLCertPublicKeyAlgorithm Property (AS4Client Control)

The textual description of the certificate's public key algorithm.

Syntax

as4clientcontrol.SSLCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertPublicKeyLength Property (AS4Client Control)

The length of the certificate's public key (in bits).

Syntax

as4clientcontrol.SSLCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLCertSerialNumber Property (AS4Client Control)

The serial number of the certificate encoded as a string.

Syntax

as4clientcontrol.SSLCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLCertSignatureAlgorithm Property (AS4Client Control)

The text description of the certificate's signature algorithm.

Syntax

as4clientcontrol.SSLCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertStore Property (AS4Client Control)

The name of the certificate store for the client certificate.

Syntax

as4clientcontrol.SSLCertStore[=string]

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password-protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertStoreB.

Data Type

Binary String

SSLCertStorePassword Property (AS4Client Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

as4clientcontrol.SSLCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (AS4Client Control)

The type of certificate store for this certificate.

Syntax

as4clientcontrol.SSLCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubjectAltNames Property (AS4Client Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

as4clientcontrol.SSLCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLCertThumbprintMD5 Property (AS4Client Control)

The MD5 hash of the certificate.

Syntax

as4clientcontrol.SSLCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA1 Property (AS4Client Control)

The SHA-1 hash of the certificate.

Syntax

as4clientcontrol.SSLCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA256 Property (AS4Client Control)

The SHA-256 hash of the certificate.

Syntax

as4clientcontrol.SSLCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertUsage Property (AS4Client Control)

The text description of UsageFlags .

Syntax

as4clientcontrol.SSLCertUsage

Default Value

""

Remarks

The text description of SSLCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLCertUsageFlags Property (AS4Client Control)

The flags that show intended use for the certificate.

Syntax

as4clientcontrol.SSLCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLCertUsageFlags is a combination of the following flags:

Please see the SSLCertUsage property for a text representation of SSLCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLCertVersion Property (AS4Client Control)

The certificate's version number.

Syntax

as4clientcontrol.SSLCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLCertSubject Property (AS4Client Control)

The subject of the certificate used for client authentication.

Syntax

as4clientcontrol.SSLCertSubject[=string]

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLCertEncoded Property (AS4Client Control)

The certificate (PEM/Base64 encoded).

Syntax

as4clientcontrol.SSLCertEncoded[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLProvider Property (AS4Client Control)

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax

as4clientcontrol.SSLProvider[=integer]

Possible Values

sslpAutomatic(0), 
sslpPlatform(1), 
sslpInternal(2)

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the control will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:

Additional Notes

In most cases using the default value (Automatic) is recommended. The control will select a provider depending on the current platform.

When Automatic is selected, the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used.

Data Type

Integer

SSLServerCertEffectiveDate Property (AS4Client Control)

The date on which this certificate becomes valid.

Syntax

as4clientcontrol.SSLServerCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExpirationDate Property (AS4Client Control)

The date on which the certificate expires.

Syntax

as4clientcontrol.SSLServerCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExtendedKeyUsage Property (AS4Client Control)

A comma-delimited list of extended key usage identifiers.

Syntax

as4clientcontrol.SSLServerCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLServerCertFingerprint Property (AS4Client Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

as4clientcontrol.SSLServerCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA1 Property (AS4Client Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

as4clientcontrol.SSLServerCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA256 Property (AS4Client Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

as4clientcontrol.SSLServerCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLServerCertIssuer Property (AS4Client Control)

The issuer of the certificate.

Syntax

as4clientcontrol.SSLServerCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLServerCertPrivateKey Property (AS4Client Control)

The private key of the certificate (if available).

Syntax

as4clientcontrol.SSLServerCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLServerCertPrivateKey may be available but not exportable. In this case, SSLServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLServerCertPrivateKeyAvailable Property (AS4Client Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

as4clientcontrol.SSLServerCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLServerCertPrivateKey is available for the selected certificate. If SSLServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLServerCertPrivateKeyContainer Property (AS4Client Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

as4clientcontrol.SSLServerCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLServerCertPublicKey Property (AS4Client Control)

The public key of the certificate.

Syntax

as4clientcontrol.SSLServerCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyAlgorithm Property (AS4Client Control)

The textual description of the certificate's public key algorithm.

Syntax

as4clientcontrol.SSLServerCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyLength Property (AS4Client Control)

The length of the certificate's public key (in bits).

Syntax

as4clientcontrol.SSLServerCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLServerCertSerialNumber Property (AS4Client Control)

The serial number of the certificate encoded as a string.

Syntax

as4clientcontrol.SSLServerCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLServerCertSignatureAlgorithm Property (AS4Client Control)

The text description of the certificate's signature algorithm.

Syntax

as4clientcontrol.SSLServerCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertStore Property (AS4Client Control)

The name of the certificate store for the client certificate.

Syntax

as4clientcontrol.SSLServerCertStore

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLServerCertStoreType property denotes the type of the certificate store specified by SSLServerCertStore. If the store is password-protected, specify the password in SSLServerCertStorePassword.

SSLServerCertStore is used in conjunction with the SSLServerCertSubject property to specify client certificates. If SSLServerCertStore has a value, and SSLServerCertSubject or SSLServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLServerCertStoreB.

This property is read-only.

Data Type

Binary String

SSLServerCertStorePassword Property (AS4Client Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

as4clientcontrol.SSLServerCertStorePassword

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

This property is read-only.

Data Type

String

SSLServerCertStoreType Property (AS4Client Control)

The type of certificate store for this certificate.

Syntax

as4clientcontrol.SSLServerCertStoreType

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

This property is read-only.

Data Type

Integer

SSLServerCertSubjectAltNames Property (AS4Client Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

as4clientcontrol.SSLServerCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLServerCertThumbprintMD5 Property (AS4Client Control)

The MD5 hash of the certificate.

Syntax

as4clientcontrol.SSLServerCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA1 Property (AS4Client Control)

The SHA-1 hash of the certificate.

Syntax

as4clientcontrol.SSLServerCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA256 Property (AS4Client Control)

The SHA-256 hash of the certificate.

Syntax

as4clientcontrol.SSLServerCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertUsage Property (AS4Client Control)

The text description of UsageFlags .

Syntax

as4clientcontrol.SSLServerCertUsage

Default Value

""

Remarks

The text description of SSLServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLServerCertUsageFlags Property (AS4Client Control)

The flags that show intended use for the certificate.

Syntax

as4clientcontrol.SSLServerCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLServerCertUsageFlags is a combination of the following flags:

Please see the SSLServerCertUsage property for a text representation of SSLServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLServerCertVersion Property (AS4Client Control)

The certificate's version number.

Syntax

as4clientcontrol.SSLServerCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLServerCertSubject Property (AS4Client Control)

The subject of the certificate used for client authentication.

Syntax

as4clientcontrol.SSLServerCertSubject

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

This property is read-only.

Data Type

String

SSLServerCertEncoded Property (AS4Client Control)

The certificate (PEM/Base64 encoded).

Syntax

as4clientcontrol.SSLServerCertEncoded

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLServerCertEncodedB.

This property is read-only and not available at design time.

Data Type

Binary String

Timeout Property (AS4Client Control)

The timeout for the control.

Syntax

as4clientcontrol.Timeout[=integer]

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the control will wait for the operation to complete before returning control.

The control will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the control fails with an error.

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

TokenPassword Property (AS4Client Control)

The password used in UsernameToken authentication.

Syntax

as4clientcontrol.TokenPassword[=string]

Default Value

""

Remarks

This property specifies the password used in UsernameToken authentication.

UsernameToken Authentication Notes

If TokenUser and TokenPassword are specified the control will include UsernameToken authentication when ReceiveFiles is called. This functionality is only applicable when calling ReceiveFiles.

TokenPassword should normally be set to the plaintext password that both the client and server know. The control will automatically use SHA-1 to create a hash of the password when TokenPasswordType is set to tptDigest (default). The hashed password is sent in the request, along with a creation date and nonce. The server will validate these values when receiving the request.

client.TokenUser = "User"; client.TokenPassword = "MyPassword"; client.TokenPasswordType = As4clientTokenPasswordTypes.tptDigest; client.ReceiveFiles();

A creation date element is always sent in the request. A nonce is sent by default but can be disabled by setting UseNonce to False.

If TokenPasswordType is set to tptText the control will transmit value provided in TokenPassword exactly as it is provided. The value will not be hashed. This may be useful in cases where an alternative credential mechanism is used between the client and server.

Data Type

String

TokenPasswordType Property (AS4Client Control)

The password type used in UsernameToken authentication.

Syntax

as4clientcontrol.TokenPasswordType[=integer]

Possible Values

tptDigest(0), 
tptText(1)

Default Value

0

Remarks

The type of password to send in the request. Possible values are:

UsernameToken Authentication Notes

If TokenUser and TokenPassword are specified the control will include UsernameToken authentication when ReceiveFiles is called. This functionality is only applicable when calling ReceiveFiles.

TokenPassword should normally be set to the plaintext password that both the client and server know. The control will automatically use SHA-1 to create a hash of the password when TokenPasswordType is set to tptDigest (default). The hashed password is sent in the request, along with a creation date and nonce. The server will validate these values when receiving the request.

client.TokenUser = "User"; client.TokenPassword = "MyPassword"; client.TokenPasswordType = As4clientTokenPasswordTypes.tptDigest; client.ReceiveFiles();

A creation date element is always sent in the request. A nonce is sent by default but can be disabled by setting UseNonce to False.

If TokenPasswordType is set to tptText the control will transmit value provided in TokenPassword exactly as it is provided. The value will not be hashed. This may be useful in cases where an alternative credential mechanism is used between the client and server.

Data Type

Integer

TokenUser Property (AS4Client Control)

The username used in UsernameToken authentication.

Syntax

as4clientcontrol.TokenUser[=string]

Default Value

""

Remarks

This property specifies the username to be sent for UsernameToken authentication.

UsernameToken Authentication Notes

If TokenUser and TokenPassword are specified the control will include UsernameToken authentication when ReceiveFiles is called. This functionality is only applicable when calling ReceiveFiles.

TokenPassword should normally be set to the plaintext password that both the client and server know. The control will automatically use SHA-1 to create a hash of the password when TokenPasswordType is set to tptDigest (default). The hashed password is sent in the request, along with a creation date and nonce. The server will validate these values when receiving the request.

client.TokenUser = "User"; client.TokenPassword = "MyPassword"; client.TokenPasswordType = As4clientTokenPasswordTypes.tptDigest; client.ReceiveFiles();

A creation date element is always sent in the request. A nonce is sent by default but can be disabled by setting UseNonce to False.

If TokenPasswordType is set to tptText the control will transmit value provided in TokenPassword exactly as it is provided. The value will not be hashed. This may be useful in cases where an alternative credential mechanism is used between the client and server.

Data Type

String

URL Property (AS4Client Control)

The URL to which the request is made.

Syntax

as4clientcontrol.URL[=string]

Default Value

""

Remarks

This property specifies the URL to which the request is made. SSL will be used if and only if the URL scheme is "https".

Data Type

String

Config Method (AS4Client Control)

Sets or retrieves a configuration setting.

Syntax

as4clientcontrol.Config ConfigurationString

Remarks

Config is a generic method available in every control. It is used to set and retrieve configuration settings for the control.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the control, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoEvents Method (AS4Client Control)

This method processes events from the internal message queue.

Syntax

as4clientcontrol.DoEvents 

Remarks

When DoEvents is called, the control processes any available events. If no events are available, it waits for a preset period of time, and then returns.

Interrupt Method (AS4Client Control)

This method interrupts the current method.

Syntax

as4clientcontrol.Interrupt 

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ReceiveFiles Method (AS4Client Control)

Connects to a server to receive files.

Syntax

as4clientcontrol.ReceiveFiles 

Remarks

ReceiveFiles establishes a connection to the server specified by URL and receives files.

The MPC specifies the Message Partition Channel from which messages will be received. The server will reply with files from this channel. If IncomingDirectory is set before calling this method the files will be written to the specified folder, otherwise inspect EDIData to obtain the received file data. The following properties are applicable when calling this method:

• SigningCert (required to sign the request)
• Certificate (required for decryption)
• SignerCert (required for signature verification)
• URL
• IncomingDirectory (optional)
• LogDirectory
• MPC
• TokenUser
• TokenPassword
• TokenPasswordType

After calling this method the following properties will be populated and may be inspected:

• AS4From
• AS4To
• AgreementRef
• ConversationId
• Service
• ServiceAction
• ServiceType
• MessageId
• Receipt

The Receipt property will be populated with the receipt corresponding to the received message, but it is not yet delivered. The receipt may be delivered by bundling it with another request to receive files, or by calling SendReceipt.

To bundle the receipt with a subsequent ReceiveFiles call the Receipt property must hold the receipt. If the same instance of the control is being used this is already true since Receipt is populated automatically after receiving the file. To use another instance of the control for multiple calls to ReceiveFiles be sure to save the Receipt's ReceiptContent and ReceiptRefToMessageId values for later use.

ReceiveFiles Example: client.Profile = As4clientProfiles.ebpfENTSOG; //Company A's private certificate. Used for signing the request. client.SigningCert = new Certificate(CertStoreTypes.cstPFXFile, "C:\\files\\as4\\CompanyA.pfx", "password", "*"); //Company A's private certificate. Used for decrypting the file. client.Certificate = new Certificate(CertStoreTypes.cstPFXFile, "C:\\files\\as4\\CompanyA.pfx", "password", "*"); //Company B's public certificate. Used for signature verification. client.SignerCert = new Certificate("C:\\files\\as4\\CompanyB.cer"); client.URL = "http://www.company.com:9090/msh"; //Message Channel id client.MPC = "mpc_a"; client.IncomingDirectory = "C:\\incoming_dir"; client.ReceiveFiles(); //Inspect client.AgreementRef and other properties for information about the received files Console.WriteLine(client.AgreementRef); Console.WriteLine(client.AS4From.Id); Console.WriteLine(client.AS4To.Id); Console.WriteLine(client.ConversationId); //Save the receipt for later use string receiptContent = client.Receipt.Content; string receiptRefId = client.Receipt.RefToMessageId;

At this stage the receipt data is saved. Later when making another call to ReceiveFiles and populate the Receipt property with this receipt data. When ReceiveFiles is called again, the receipt for the previous message will be included with the request. client.Receipt = new EBReceipt(receiptRefId, receiptContent); client.ReceiveFiles(); //This will now include the bundled receipt

Reset Method (AS4Client Control)

Resets the state of the control.

Syntax

as4clientcontrol.Reset 

Remarks

Reset resets the state of the control. All properties will be set to their default values.

SendFiles Method (AS4Client Control)

Sends file(s) to the specified server and verify the receipt (if present).

Syntax

as4clientcontrol.SendFiles 

Remarks

SendFiles sends the files specified by EDIData to URL.

Before calling this method set AgreementRef to the agreement identifier used by both parties. Set AS4From and AS4To. Set EDIData specifies the file(s) to be sent. To encrypt the data set RecipientCerts. To sign the data set SigningCert. The SignerCert property should be set to verify the signed receipt.

When this method is called the file(s) will be sent and any returned receipts will be verified.

To indicate a synchronous receipt is expected set ReceiptReplyMode to rrmSync. The following properties are applicable when calling this method with an agreement specifying a synchronous receipt (a receipt provided in the response):

• AgreementRef
• AS4From
• AS4To
• EDIData
• URL
• RecipientCerts (required to encrypt)
• SignerCert (required to verify signed receipts)
• SigningCert (required to sign files)
• ConversationId (optional)
• EncryptionAlgorithm (optional)
• LogDirectory (optional)
• MessageId (optional)
• MessageProperties (optional)
• Profile (optional)
• ReceiptReplyMode
• Service (optional)
• ServiceType (optional)
• SignatureAlgorithm (optional)

SendFiles Example (synchronous receipt): client.Profile = As4clientProfiles.ebpfENTSOG; //Specify the agreement and party information client.AgreementRef = "http://agreements.company.com/sign_and_encrypt"; client.AS4From.Role = "Sender"; client.AS4From.Id = "org:b2b:example:company:A"; client.AS4To.Role = "Receiver"; client.AS4To.Id = "org:b2b:example:company:B"; //Configure the component to expect a synchronous receipt. client.ReceiptReplyMode = As4clientReceiptReplyModes.rrmSync; //Company A's private certificate. Used to sign the outgoing message and files. client.SigningCert = new Certificate(CertStoreTypes.cstPFXFile, "C:\\files\\CompanyA.pfx", "password", "*"); //Company B's public certificate. Used to encrypt the outgoing file. client.RecipientCerts.Add(new Certificate("C:\\files\\as4\\CompanyB.cer")); //Company B's public certificate. Used to verify the signed receipt. client.SignerCert = new Certificate("C:\\files\\as4\\CompanyB.cer"); client.URL = "http://www.company.com:9090/msh"; EBData data = new EBData(); data.EDIType = "application/edi-x12"; data.Filename = "C:\\files\\myfile.x12"; data.Name = "myfile.x12"; client.EDIData.Add(data); //Send file(s) and verify the receipt. client.SendFiles();

The control also supports asynchronous receipts. In this configuration a file is sent from the control to another party, but the receipt is not returned in the response. Instead the other party sends the receipt at a later time. The AS4Server control may be used inside a web page to receive the asynchronous receipt. After receiving the receipt either AS4Server or AS4Client may be used to verify the receipt.

Details about the original message must be stored so that the receipt can be correlated with the message and properly verified. The easiest way to do this is to set AsyncReceiptInfoDir before calling SendFiles. The control will automatically store the required information.

See the VerifyReceipt method of AS4Server for details about verifying asynchronous receipts.

To indicate an asynchronous receipt is expected set ReceiptReplyMode to rrmAsync. The following properties are applicable when calling this method with an agreement specifying a synchronous receipt (a receipt provided in the response):

• AgreementRef
• AS4From
• AS4To
• AsyncReceiptInfoDir
• EDIData
• URL
• RecipientCerts (required to encrypt)
• SignerCert (required to verify signed receipts)
• SigningCert (required to sign files)
• ConversationId (optional)
• EncryptionAlgorithm (optional)
• LogDirectory (optional)
• MessageId (optional)
• MessageProperties (optional)
• OriginalSOAPMessage (optional)
• OriginalSOAPMessageId (optional)
• Profile (optional)
• ReceiptReplyMode
• Service (optional)
• ServiceType (optional)
• SignatureAlgorithm (optional)

SendFiles Example (asynchronous receipt): client.Profile = As4clientProfiles.ebpfENTSOG; //Specify the agreement and party information client.AgreementRef = "http://agreements.company.com/sign_and_encrypt_async"; client.AS4From.Role = "Sender"; client.AS4From.Id = "org:b2b:example:company:A"; client.AS4To.Role = "Receiver"; client.AS4To.Id = "org:b2b:example:company:B"; //Configure the component to expect a synchronous receipt. client.ReceiptReplyMode = As4clientReceiptReplyModes.rrmAsync; client.AsyncReceiptInfoDir = "C:\\async_info"; //Company A's private certificate. Used to sign the outgoing message and files. client.SigningCert = new Certificate(CertStoreTypes.cstPFXFile, "C:\\files\\CompanyA.pfx", "password", "*"); //Company B's public certificate. Used to encrypt the outgoing files. client.RecipientCerts.Add(new Certificate("C:\\files\\as4\\CompanyB.cer")); //Company B's public certificate. Used to verify the signed receipt. client.SignerCert = new Certificate("C:\\files\\as4\\CompanyB.cer"); client.URL = "http://www.company.com:9090/msh"; EBData data = new EBData(); data.EDIType = "application/edi-x12"; data.Filename = "C:\\files\\myfile.x12"; data.Name = "myfile.x12"; client.EDIData.Add(data); //Send file(s). client.SendFiles();

At this point the file(s) have been sent, but a receipt has not yet been received. AS4Server can be used within a web site to listen for the receipt. //**** Inside a web site **** As4server server = new As4server; server.ReadRequest(); if (!String.IsNullOrEmpty(server.IncomingReceipt.Content)) { server.AsyncReceiptInfoDir = "C:\\async_info"; server.VerifyReceipt(); //The receipt is now verified }

SendReceipt Method (AS4Client Control)

Sends an asynchronous receipt.

Syntax

as4clientcontrol.SendReceipt 

Remarks

SendReceipt sends an asynchronous receipt to the URL.

This method is typically used in conjunction with AS4Server to send an asynchronous receipt after receiving a message. The receipt will be created at the time of the incoming request, then saved for later use. When the receipt is to be sent populate Receipt and call this method.

//Send an asynchronous receipt client.URL = ""http://www.company.com:9090/msh""; client.Receipt = new EBReceipt(server.Receipt.RefToMessageId, server.Receipt.Content); client.ReceiptReplyMode = As4clientReceiptReplyModes.rrmAsync; client.SendReceipt();

Connected Event (AS4Client Control)

Fired immediately after a connection completes (or fails).

Syntax

Sub as4clientcontrol_Connected(StatusCode As Integer, Description As String)

Remarks

If the connection is made normally, StatusCode is 0 and Description is "OK".

If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error. The corresponding Visual Basic error code can be obtained by adding 15001 to this value.

Please refer to the Error Codes section for more information.

Disconnected Event (AS4Client Control)

Fired when a connection is closed.

Syntax

Sub as4clientcontrol_Disconnected(StatusCode As Integer, Description As String)

Remarks

If the connection is broken normally, StatusCode is 0 and Description is "OK".

If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP/IP) subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error. The corresponding Visual Basic error code can be obtained by adding 15001 to this value.

Please refer to the Error Codes section for more information.

EndTransfer Event (AS4Client Control)

Fired when a document finishes transferring.

Syntax

Sub as4clientcontrol_EndTransfer(Direction As Integer)

Remarks

This event is fired first when the client finishes sending data to the server (in a POST or PUT request) and then when the document text finishes transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Error Event (AS4Client Control)

Fired when information is available about errors during data delivery.

Syntax

Sub as4clientcontrol_Error(ErrorCode As Integer, Description As String)

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the control fails with an error.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

The Error event is fired in case of exceptional conditions during message processing. Normally the control fails with an error.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Header Event (AS4Client Control)

Fired every time a header line comes in.

Syntax

Sub as4clientcontrol_Header(Field As String, Value As String)

Remarks

The Field parameter contains the name of the HTTP header (which is the same as it is delivered). The Value parameter contains the header contents.

If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).

Log Event (AS4Client Control)

Fired with log information while processing a message.

Syntax

Sub as4clientcontrol_Log(LogType As String, LogMessage As String)

Remarks

This event fires once for each log message generated by the control. The verbosity is controlled by the LogLevel setting.

Log messages available through this event correspond to log files written to LogDirectory. This event provides a way to obtain log messages without relying on files on disk. This event fires regardless of the value of LogDirectory (i.e. when LogDirectory is empty the event will still fire).

The LogMessage event parameter holds the raw log data.

The LogType event parameter indicates the type of log. Possible values are:

RecipientInfo Event (AS4Client Control)

Fired for each recipient certificate of the encrypted message.

Syntax

Sub as4clientcontrol_RecipientInfo(Issuer As String, SerialNumber As String, SubjectKeyIdentifier As String, EncryptionAlgorithm As String)

Remarks

When ParseRequest is called and the file is encrypted, this event will fire for each recipient certificate for which the file was encrypted.

Issuer is the subject of the issuer certificate.

SerialNumber is the serial number of the encryption certificate.

SubjectKeyIdentifier is the X.509 subjectKeyIdentifier extension value of the certificate used to sign the message encoded as a hex string.

EncryptionAlgorithm is the encryption algorithm used to encrypt the message. Possible values are as follows:

• "3DES"
• "DES"
• "RC2CBC40"
• "RC2CBC64"
• "RC2CBC128" or "RC2"
• "AESCBC128" or "AES"
• "AESCBC192"
• "AESCBC256"
• "AESGCM128" or "AESGCM"
• "AESGCM192"
• "AESGCM256"

SetCookie Event (AS4Client Control)

Fired for every cookie set by the server.

Syntax

Sub as4clientcontrol_SetCookie(Name As String, Value As String, Expires As String, Domain As String, Path As String, Secure As Boolean)

Remarks

This event is fired for every Set-Cookie: header received from the HTTP server.

The Name parameter contains the name of the cookie, with the corresponding value supplied in the Value parameter.

The Expires parameter contains an expiration time for the cookie (if provided by the server). The time format used is "Weekday, DD-Mon-YY HH:MM:SS GMT". If the server does not provide an expiration time, the Expires parameter will be an empty string. In this case, the convention is to drop the cookie at the end of the session.

The Domain parameter contains a domain name to limit the cookie to (if provided by the server). If the server does not provide a domain name, the Domain parameter will be an empty string. The convention in this case is to use the server specified in the URL (URLServer) as the cookie domain.

The Path parameter contains a path name to limit the cookie to (if provided by the server). If the server does not provide a cookie path, the Path parameter will be an empty string. The convention in this case is to use the path specified in the URL (URLPath) as the cookie path.

The Secure parameter specifies whether the cookie is secure. If the value of this parameter is True, the cookie value must be submitted only through a secure (HTTPS) connection.

SignerCertInfo Event (AS4Client Control)

This event is fired during verification of the signed message.

Syntax

Sub as4clientcontrol_SignerCertInfo(Issuer As String, SerialNumber As String, SubjectKeyIdentifier As String, CertEncoded As String)

Remarks

During verification, this event will be raised while parsing the signer's certificate information. The parameters that are populated depend on the options used when the message was originally signed. This information may be used to select the correct certificate for SignerCert to verify the signature. The following parameters may be populated:

Issuer specifies the subject of the issuer of the certificate used to sign the message.

SerialNumber is the serial number of the certificate used to sign the message.

SubjectKeyIdentifier is the X.509 subjectKeyIdentifier extension value of the certificate used to sign the message encoded as a hex string.

CertEncoded is the PEM (Base64 encoded) public certificate needed to verify the signature.

Note: When this value is present, the control will automatically use this value to perform signature verification.

The SignerCert property may be set from within this event. In this manner, the decision of which signer certificate to load may be delayed until the parameters of this event are inspected and the correct certificate can be located and loaded.

SSLServerAuthentication Event (AS4Client Control)

Fired after the server presents its certificate to the client.

Syntax

Sub as4clientcontrol_SSLServerAuthentication(CertEncoded As String, CertSubject As String, CertIssuer As String, Status As String, Accept As Boolean)

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (AS4Client Control)

Fired when secure connection progress messages are available.

Syntax

Sub as4clientcontrol_SSLStatus(Message As String)

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

StartTransfer Event (AS4Client Control)

Fired when a document starts transferring (after the headers).

Syntax

Sub as4clientcontrol_StartTransfer(Direction As Integer)

Remarks

This event is fired first when the client starts sending data to the server (in a POST or PUT request) and then when the document text starts transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

TokenAuthentication Event (AS4Client Control)

Fired when the server makes use of UsernameToken authentication.

Syntax

Sub as4clientcontrol_TokenAuthentication(User As String, Password As String, PasswordType As String, Accept As Boolean)

Remarks

This event fires when a server sends a response that includes UsernameToken authentication. This is typically only used by servers when sending a pull response.

User identifies the user.

Password should be set from within the event if PasswordType is 0 (digest). This parameter can be read when PasswordType is 1 (text).

PasswordType specifies the type of password. Possible values are:

• 0 (Digest)
• 1 (Text)

Accept may be set to manually accept the request.

When PasswordType is 0 (Digest) set the Password parameter to the plaintext password. Do not set Accept The control will hash the provided password value and compare it to the value in the request. If it matched the control will accept the request. If it does not match the control will populate Errors with an error indicating authentication has failed.

When PasswordType is 1 (Text) the Password parameter will hold the exact value received in the request. Inspect Password and determine whether to accept the request. To accept the request set Accept to True.

After this event fires if authentication failed Errors will contain an appropriate error. Send the errors back to the server by calling SendResponse.

Transfer Event (AS4Client Control)

Fired while a document transfers (delivers document).

Syntax

Sub as4clientcontrol_Transfer(Direction As Integer, BytesTransferred As Long64, PercentDone As Integer, Text As String)

Remarks

The Text parameter contains the portion of the document text being received. It is empty if data are being posted to the server.

The BytesTransferred parameter contains the number of bytes transferred in this Direction since the beginning of the document text (excluding HTTP response headers).

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Config Settings (AS4Client Control)

The control accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the control, access to these internal properties is provided through the Config method.

AS4Client Config Settings

HTTP Config Settings

TCPClient Config Settings

SSL Config Settings

Socket Config Settings

Base Config Settings

Trappable Errors (AS4Client Control)

AS4Client Errors

HTTP Errors

The control may also return one of the following error codes, which are inherited from other controls.

TCPClient Errors

TCP/IP Errors