AS2ProfileMgr Component

Properties   Methods   Events   Config Settings   Errors  

The AS2ProfileMgr component is used to manage self and trading partner profiles used for AS2 communication.

Syntax

nsoftware.IPWorksEDI.AS2ProfileMgr

Remarks

AS2 communication require management of several configuration settings such as encryption certificate, signing certificate and TLS/SSL certificates. Both for your self and your trading partners.

The AS2ProfileMgr component allows you to manage such settings using simple XML files, furthermore these configuration files can be directly fed to the AS2Sender and AS2Receiver Component as a convenient way to set communication parameters.

To use the AS2ProfileMgr you should first set DataDir to configure the directory that it will use to store the profiles. You can then set the properties to be retained and save them by invoking SaveProfile, alternatively you could retrieve previously saved settings using LoadProfile.

When a new trading partner profile is saved a sub-directory named after the trading partner is created within DataDir and the file partner.cfg is saved in it. If CreateDirStruct is set to true, the following sub-directories are created within the partner directory. These can be helpful in managing other data for the trading partner.

DirDeletedDeleted files.
DirIncomingReceived files.
DirLogsLog files.
DirOutgoingFiles to be sent.
DirPendingFiles pending async MDN.
DirPendingInfoFiles having data to verify async MSN.
DirSentSent files.

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

AsyncMDNURLThe URL for posting Async MDNs.
CreateDirStructOption to create file management directories.
DataDirThe directory that the AS2ProfileMgr uses to store self and trading partner profiles.
DirDeletedThe directory used to store deleted files.
DirIncomingThe directory used to store incoming files.
DirLogsThe directory used to store log files.
DirOutgoingThe directory used to store outgoing files.
DirPendingThe directory used to store files waiting for Async MDN.
DirPendingInfoThe directory used to store files containing data to verify Async MDN.
DirSentThe directory used to store sent files.
EmailYour email address.
EncryptionCertCertificate used for encryption or decryption.
OptionCompressPreference to compress outgoing data.
OptionEncryptPreference to encrypt outgoing data.
OptionSignPreference to sign outgoing data.
OrganizationThe name of your, or your trading partner's organization.
PartnerCountThe number of partners found in DataDir
RequestMDNPreference to receive MDNs from trading partner.
RequestMDNSignedPreference to request for signed MDNs.
RequestMDNSynchronousPreference to request for synchronous MDNs.
RequireEncryptPreference to receive encrypted messages.
RequireSignPreference to receive signed messages.
SigningCertCertificate used for signing or signature validation.
SSLCertCertificate used for secure communication over SSL.
URLThe URL for posting EDI data.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

ConfigSets or retrieves a configuration setting.
DeleteProfileDeletes the configuration of the specified partner.
GetPropertyGets the property propName .
GetTPInfoGets the profile of the specified partner as a XML TPInfo.
ListPartnersLists trading partners known to the AS2ProfileMgr .
ListPropertiesLists the properties read from self or partner profile.
LoadProfileLoads the profile of the trading partner identified by partnerOrganization .
ResetResets the state of the control.
SaveProfileSaves the profile of the trading partner identified by partnerOrganization .
SetPropertySets the property propName to propValue .

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

ErrorFired when information is available about errors during data delivery.
PartnerFired when ListPartners is invoked.
PartnerDirectoryFired before accessing partner.cfg of a trading partner.
PropertyFired when ListProperties is invoked.

Config Settings

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

BuildInfoInformation about the product's build.
GUIAvailableWhether or not a message loop is available for processing events.
LicenseInfoInformation about the current license.
MaskSensitiveDataWhether sensitive data is masked in log messages.
UseFIPSCompliantAPITells the component whether or not to use FIPS certified APIs.
UseInternalSecurityAPIWhether or not to use the system security libraries or an internal implementation.

AsyncMDNURL Property (AS2ProfileMgr Component)

The URL for posting Async MDNs.

Syntax

public string AsyncMDNURL { get; set; }

Public Property AsyncMDNURL As String

Default Value

""

Remarks

This is the URL to which your trading partners would post Async MDNs, if you choose to get asynchronous notifications. The choice of receiving asynchronous notifications can be made on a per partner basis and is reflected in RequestMDNSynchronous.

CreateDirStruct Property (AS2ProfileMgr Component)

Option to create file management directories.

Syntax

public bool CreateDirStruct { get; set; }

Public Property CreateDirStruct As Boolean

Default Value

True

Remarks

Set CreateDirStruct to false if you would like AS2ProfileMgr not to create file management directories. These are created for a trading partner when SaveProfile is invoked.

DataDir Property (AS2ProfileMgr Component)

The directory that the AS2ProfileMgr uses to store self and trading partner profiles.

Syntax

public string DataDir { get; set; }

Public Property DataDir As String

Default Value

""

Remarks

AS2ProfileMgr uses DataDir to store self and trading partner configuration. The self profile is stored in the XML file me.cfg and the trading partner profiles are stored in the XML file partner.cfg. The partner.cfg is stored in a separate sub-directory for each trading partner. The sub-directory name is derived from the parameter PartnerOrganization of SaveProfile.

DirDeleted Property (AS2ProfileMgr Component)

The directory used to store deleted files.

Syntax

public string DirDeleted { get; }

Public ReadOnly Property DirDeleted As String

Default Value

""

Remarks

If CreateDirStruct was true when SaveProfile was invoked a directory for storing deleted files would have been created. The path to this directory can be read from DirDeleted after invoking LoadProfile.

This property is read-only.

DirIncoming Property (AS2ProfileMgr Component)

The directory used to store incoming files.

Syntax

public string DirIncoming { get; }

Public ReadOnly Property DirIncoming As String

Default Value

""

Remarks

If CreateDirStruct was true when SaveProfile was invoked a directory for storing incoming files would have been created. The path to this directory can be read from DirIncoming after invoking LoadProfile.

This property is read-only.

DirLogs Property (AS2ProfileMgr Component)

The directory used to store log files.

Syntax

public string DirLogs { get; }

Public ReadOnly Property DirLogs As String

Default Value

""

Remarks

If CreateDirStruct was true when SaveProfile was invoked a directory for storing log files would have been created. The path to this directory can be read from DirLogs after invoking LoadProfile.

This property is read-only.

DirOutgoing Property (AS2ProfileMgr Component)

The directory used to store outgoing files.

Syntax

public string DirOutgoing { get; }

Public ReadOnly Property DirOutgoing As String

Default Value

""

Remarks

If CreateDirStruct was true when SaveProfile was invoked a directory for storing outgoing files would have been created. The path to this directory can be read from DirOutgoing after invoking LoadProfile.

This property is read-only.

DirPending Property (AS2ProfileMgr Component)

The directory used to store files waiting for Async MDN.

Syntax

public string DirPending { get; }

Public ReadOnly Property DirPending As String

Default Value

""

Remarks

If CreateDirStruct was true when SaveProfile was invoked a directory for storing files waiting for Async MDN would have been created. The path to this directory can be read from DirPending after invoking LoadProfile.

This property is read-only.

DirPendingInfo Property (AS2ProfileMgr Component)

The directory used to store files containing data to verify Async MDN.

Syntax

public string DirPendingInfo { get; }

Public ReadOnly Property DirPendingInfo As String

Default Value

""

Remarks

If CreateDirStruct was true when SaveProfile was invoked a directory for storing files containing data for Async MDN verification would have been created. The path to this directory can be read from DirPendingInfo after invoking LoadProfile.

This property is read-only.

DirSent Property (AS2ProfileMgr Component)

The directory used to store sent files.

Syntax

public string DirSent { get; }

Public ReadOnly Property DirSent As String

Default Value

""

Remarks

If CreateDirStruct was true when SaveProfile was invoked a directory for storing sent files would have been created. The path to this directory can be read from DirSent after invoking LoadProfile.

This property is read-only.

Email Property (AS2ProfileMgr Component)

Your email address.

Syntax

public string Email { get; set; }

Public Property Email As String

Default Value

""

Remarks

Email is used to store your email address. The email address is used to request a MDN. It is simply used as a token to request a MDN, it does not imply that the MDN would be sent to this address. Please refer to the property MDNTo in AS2Sender for details.

After invoking LoadProfile, the Email will contain your currently configured email address, alternatively Email may be set and saved by invoking SaveProfile.

EncryptionCert Property (AS2ProfileMgr Component)

Certificate used for encryption or decryption.

Syntax

public Certificate EncryptionCert { get; set; }

Public Property EncryptionCert As Certificate

Remarks

EncryptionCert for a trading partner, can be set to the path of a file containing the base64 encoded encryption certificate or to the contents of the file itself. It is used by the AS2Sender to encrypt outgoing data. It is also used by AS2Receiver to verify signatures on incoming data if a separate SigningCert is not specified.

While specifying self profile, EncryptionCert should be a pfx file containing a single certificate, private key pair. In this case EncryptionCertPassword must also be specified. EncryptionCert from self profile is used by AS2Receiver to decrypt incoming data. It is also used by AS2Sender to sign outgoing data if a separate SigningCert is not specified.

After invoking LoadProfile, the EncryptionCert will contain the currently saved encryption certificate, alternatively EncryptionCert may be set and saved by invoking SaveProfile.

Please refer to the Certificate type for a complete list of fields.

OptionCompress Property (AS2ProfileMgr Component)

Preference to compress outgoing data.

Syntax

public bool OptionCompress { get; set; }

Public Property OptionCompress As Boolean

Default Value

False

Remarks

OptionCompress is used to store your preference of compressing the data sent to your trading partner.

After invoking LoadProfile, the OptionCompress will contain your compression preference for your trading partner, alternatively OptionCompress may be set and saved by invoking SaveProfile.

OptionEncrypt Property (AS2ProfileMgr Component)

Preference to encrypt outgoing data.

Syntax

public bool OptionEncrypt { get; set; }

Public Property OptionEncrypt As Boolean

Default Value

False

Remarks

OptionEncrypt is used to store your preference of encrypting data sent to your trading partner. If OptionEncrypt is set to true EncryptionCert must be specified.

After invoking LoadProfile, the OptionEncrypt will contain your encryption preference for your trading partner, alternatively OptionEncrypt may be set and saved by invoking SaveProfile.

OptionSign Property (AS2ProfileMgr Component)

Preference to sign outgoing data.

Syntax

public bool OptionSign { get; set; }

Public Property OptionSign As Boolean

Default Value

False

Remarks

OptionSign is used to store your preference of signing the data sent to your trading partner.

After invoking LoadProfile, the OptionSign will contain your signing preference for your trading partner, alternatively OptionSign may be set and saved by invoking SaveProfile.

Organization Property (AS2ProfileMgr Component)

The name of your, or your trading partner's organization.

Syntax

public string Organization { get; set; }

Public Property Organization As String

Default Value

""

Remarks

Generally, Organization is used to store your, or your trading partner's AS2 identifier. It is used to configure or verify AS2From and AS2To in AS2Sender and AS2Receiver components.

Invoking LoadProfile reads the AS2 identifier into Organization, alternatively you can save the AS2 identifier by setting Organization and invoking SaveProfile.

PartnerCount Property (AS2ProfileMgr Component)

The number of partners found in DataDir

Syntax

public int PartnerCount { get; }

Public ReadOnly Property PartnerCount As Integer

Default Value

0

Remarks

This property returns the number of partners found in DataDir. This proprety is populated after calling ListPartners.

This property is read-only and not available at design time.

RequestMDN Property (AS2ProfileMgr Component)

Preference to receive MDNs from trading partner.

Syntax

public bool RequestMDN { get; set; }

Public Property RequestMDN As Boolean

Default Value

False

Remarks

RequireMDN is used to store your preference of receiving MDNs for the messages you send to your trading partner.

After invoking LoadProfile, the RequireMDN will contain your preference of receiving MDNs, alternatively RequireMDN may be set and saved by invoking SaveProfile.

RequestMDNSigned Property (AS2ProfileMgr Component)

Preference to request for signed MDNs.

Syntax

public bool RequestMDNSigned { get; set; }

Public Property RequestMDNSigned As Boolean

Default Value

True

Remarks

MDNRequestSigned is used to store your preference of requesting signed MDNs from your trading partner.

After invoking LoadProfile, the MDNRequestSigned will contain your preference of requesting signed MDNs, alternatively MDNRequestSigned may be set and saved by invoking SaveProfile.

RequestMDNSynchronous Property (AS2ProfileMgr Component)

Preference to request for synchronous MDNs.

Syntax

public bool RequestMDNSynchronous { get; set; }

Public Property RequestMDNSynchronous As Boolean

Default Value

True

Remarks

MDNRequestSynchronous is used to store your preference of requesting synchronous MDNs from your trading partner.

After invoking LoadProfile, the MDNRequestSynchronous will contain your preference of requesting synchronous MDNs, alternatively MDNRequestSynchronous may be set and saved by invoking SaveProfile.

RequireEncrypt Property (AS2ProfileMgr Component)

Preference to receive encrypted messages.

Syntax

public bool RequireEncrypt { get; set; }

Public Property RequireEncrypt As Boolean

Default Value

False

Remarks

RequireEncrypt is used to store your preference of receiving encrypted messages from your trading partner.

After invoking LoadProfile, the RequireEncrypt will contain your preference of receiving encrypted messages, alternatively RequireEncrypt may be set and saved by invoking SaveProfile.

RequireSign Property (AS2ProfileMgr Component)

Preference to receive signed messages.

Syntax

public bool RequireSign { get; set; }

Public Property RequireSign As Boolean

Default Value

False

Remarks

RequireSign is used to store your preference of receiving signed messages from your trading partner.

After invoking LoadProfile, the RequireSign will contain your preference of receiving signed messages, alternatively RequireSign may be set and saved by invoking SaveProfile.

SigningCert Property (AS2ProfileMgr Component)

Certificate used for signing or signature validation.

Syntax

public Certificate SigningCert { get; set; }

Public Property SigningCert As Certificate

Remarks

SigningCert for a trading partner, can be set to a filename containing the Base64 encoded signing certificate or to the contents of such file. It is used by the AS2Receiver to verify the signature on incoming data. If SigningCert is not specified EncryptionCert is used for signature verification as well.

While specifying "self" profile, SigningCert should be a pfx file containing a single certificate - private key pair. In such case SigningCertPassword must also be specified. SigningCert from "self" profile is used by AS2Sender to sign outgoing data. If SigningCert is not specified the EncryptionCert is used for signing as well.

After invoking LoadProfile, the SigningCert will contain the currently saved signing certificate, alternatively SigningCert may be set and saved by invoking SaveProfile.

Please refer to the Certificate type for a complete list of fields.

SSLCert Property (AS2ProfileMgr Component)

Certificate used for secure communication over SSL.

Syntax

public Certificate SSLCert { get; set; }

Public Property SSLCert As Certificate

Remarks

SSLCert for a trading partner, can be set to a filename containing the Base64 encoded SSL certificate or to the contents of the file itself. It is used by the AS2Sender to authenticate the trading partner's server and to establish a secure communication channel.

While specifying self profile, SSLCert should be a pfx file containing a single certificate, private key pair. In this case SSLPassword must also be specified. SSLCert from self profile is used by AS2Sender for client side SSL authentication.

After invoking LoadProfile, the SSLCert will contain the currently saved SSL certificate, alternatively SSLCert may be set and saved by invoking SaveProfile.

Please refer to the Certificate type for a complete list of fields.

URL Property (AS2ProfileMgr Component)

The URL for posting EDI data.

Syntax

public string URL { get; set; }

Public Property URL As String

Default Value

""

Remarks

URL is the URL provided by your trading partner for posting EDI Data. Please refer to the URL property in AS2Sender for details.

In the case of "self" profile i.e. when the parameter partnerIdentifier is "self" in LoadProfile or SaveProfile, URL refers to the URL that your trading partners use to post data to you.

After invoking LoadProfile, the URL will contain the URL of your trading partner, alternatively URL may be set and saved by invoking SaveProfile.

Config Method (AS2ProfileMgr Component)

Sets or retrieves a configuration setting.

Syntax

public string Config(string configurationString);

Async Version
public async Task<string> Config(string configurationString);
public async Task<string> Config(string configurationString, CancellationToken cancellationToken);

Public Function Config(ByVal ConfigurationString As String) As String

Async Version
Public Function Config(ByVal ConfigurationString As String) As Task(Of String)
Public Function Config(ByVal ConfigurationString As String, cancellationToken As CancellationToken) As Task(Of String)

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DeleteProfile Method (AS2ProfileMgr Component)

Deletes the configuration of the specified partner.

Syntax

public void DeleteProfile(string partnerOrganization);

Async Version
public async Task DeleteProfile(string partnerOrganization);
public async Task DeleteProfile(string partnerOrganization, CancellationToken cancellationToken);

Public Sub DeleteProfile(ByVal partnerOrganization As String)

Async Version
Public Sub DeleteProfile(ByVal partnerOrganization As String) As Task
Public Sub DeleteProfile(ByVal partnerOrganization As String, cancellationToken As CancellationToken) As Task

Remarks

The profile of the partner identified by partnerIdentifier is deleted. This method also deletes the directory in which the partner profile is stored, consequently deleting file management directories of the partner.

If the partnerOrganization specified is "self", the self profile i.e. me.cfg, is cleared.

GetProperty Method (AS2ProfileMgr Component)

Gets the property propName .

Syntax

public string GetProperty(string propName);

Async Version
public async Task<string> GetProperty(string propName);
public async Task<string> GetProperty(string propName, CancellationToken cancellationToken);

Public Function GetProperty(ByVal propName As String) As String

Async Version
Public Function GetProperty(ByVal propName As String) As Task(Of String)
Public Function GetProperty(ByVal propName As String, cancellationToken As CancellationToken) As Task(Of String)

Remarks

GetProperty can be used to query any property from "self" or partner profile. It is specially useful in retrieving properties not interpreted by AS2Sender AS2Receiver components and thus not exposed as AS2ProfileMgr properties.

GetProperty returns null if property propName was not read by LoadProfile.

GetTPInfo Method (AS2ProfileMgr Component)

Gets the profile of the specified partner as a XML TPInfo.

Syntax

public string GetTPInfo(string partnerOrganization);

Async Version
public async Task<string> GetTPInfo(string partnerOrganization);
public async Task<string> GetTPInfo(string partnerOrganization, CancellationToken cancellationToken);

Public Function GetTPInfo(ByVal partnerOrganization As String) As String

Async Version
Public Function GetTPInfo(ByVal partnerOrganization As String) As Task(Of String)
Public Function GetTPInfo(ByVal partnerOrganization As String, cancellationToken As CancellationToken) As Task(Of String)

Remarks

If the parameter partnerOrganization is "self", GetTPInfo returns a XML string representing the "self" profile otherwise it returns a XML string of partner profile. These strings can be directly fed to AS2Sender and AS2Receiver using the method SetTPInfo.

ListPartners Method (AS2ProfileMgr Component)

Lists trading partners known to the AS2ProfileMgr .

Syntax

public void ListPartners();

Async Version
public async Task ListPartners();
public async Task ListPartners(CancellationToken cancellationToken);

Public Sub ListPartners()

Async Version
Public Sub ListPartners() As Task
Public Sub ListPartners(cancellationToken As CancellationToken) As Task

Remarks

Invoking ListPartners causes the event Partner to be fired for each trading partner profile found by the AS2ProfileMgr component.

After this method returns PartnerCount is populated with the number of found partners.

ListProperties Method (AS2ProfileMgr Component)

Lists the properties read from self or partner profile.

Syntax

public void ListProperties();

Async Version
public async Task ListProperties();
public async Task ListProperties(CancellationToken cancellationToken);

Public Sub ListProperties()

Async Version
Public Sub ListProperties() As Task
Public Sub ListProperties(cancellationToken As CancellationToken) As Task

Remarks

Invoking ListProperties causes the event Property to be fired for each property read by LoadProfile.

LoadProfile Method (AS2ProfileMgr Component)

Loads the profile of the trading partner identified by partnerOrganization .

Syntax

public void LoadProfile(string partnerOrganization);

Async Version
public async Task LoadProfile(string partnerOrganization);
public async Task LoadProfile(string partnerOrganization, CancellationToken cancellationToken);

Public Sub LoadProfile(ByVal partnerOrganization As String)

Async Version
Public Sub LoadProfile(ByVal partnerOrganization As String) As Task
Public Sub LoadProfile(ByVal partnerOrganization As String, cancellationToken As CancellationToken) As Task

Remarks

If the partnerOrganization is not "self", the properties of AS2ProfileMgr are read from the XML file partner.cfg. The file is expected to be in a sub-directory within DataDir. The name of the sub-directory is derived from partnerOrganization.

Although all properties are read from the partner profile, the following are interpreted by AS2Sender and AS2Receiver components.

Partner Settings

If the partnerOrganization specified is "self", the properties of AS2ProfileMgr are read from the XML file me.cfg. The file is expected to be in DataDir.

Although all properties are read from the self profile, the following are interpreted by AS2Sender and AS2Receiver components.

My Settings

Note: "self" cannot be the name of a trading partner organization.

Reset Method (AS2ProfileMgr Component)

Resets the state of the control.

Syntax

public void Reset();

Async Version
public async Task Reset();
public async Task Reset(CancellationToken cancellationToken);

Public Sub Reset()

Async Version
Public Sub Reset() As Task
Public Sub Reset(cancellationToken As CancellationToken) As Task

Remarks

Resets all properties. After invoking this method the component may be reused as if it were newly created.

SaveProfile Method (AS2ProfileMgr Component)

Saves the profile of the trading partner identified by partnerOrganization .

Syntax

public void SaveProfile(string partnerOrganization);

Async Version
public async Task SaveProfile(string partnerOrganization);
public async Task SaveProfile(string partnerOrganization, CancellationToken cancellationToken);

Public Sub SaveProfile(ByVal partnerOrganization As String)

Async Version
Public Sub SaveProfile(ByVal partnerOrganization As String) As Task
Public Sub SaveProfile(ByVal partnerOrganization As String, cancellationToken As CancellationToken) As Task

Remarks

If the partnerOrganization is not "self", the properties of AS2ProfileMgr are saved to the XML file partner.cfg placed in a sub-directory within DataDir. The name of the sub-directory is derived from partnerOrganization. In addition to saving the partner profile, SaveProfile also creates the following directories if CreateDirStruct is set to true.

DirDeletedDeleted files.
DirIncomingReceived files.
DirLogsLog files.
DirOutgoingFiles to be sent.
DirPendingFiles pending async MDN.
DirPendingInfoFiles having data to verify async MSN.
DirSentSent files.

Although any number of properties may be saved to the partner profile, the following are interpreted by AS2Sender and AS2Receiver components.

Partner Settings

If the partnerOrganization specified is "self", the properties of AS2ProfileMgr are saved to the XML file me.cfg placed in DataDir.

Although any number of properties may be saved to the self profile, the following are interpreted by AS2Sender and AS2Receiver components.

My Settings

Note: "self" cannot be the name of a trading partner organization.

SetProperty Method (AS2ProfileMgr Component)

Sets the property propName to propValue .

Syntax

public void SetProperty(string propName, string propValue);

Async Version
public async Task SetProperty(string propName, string propValue);
public async Task SetProperty(string propName, string propValue, CancellationToken cancellationToken);

Public Sub SetProperty(ByVal propName As String, ByVal propValue As String)

Async Version
Public Sub SetProperty(ByVal propName As String, ByVal propValue As String) As Task
Public Sub SetProperty(ByVal propName As String, ByVal propValue As String, cancellationToken As CancellationToken) As Task

Remarks

SetProperty can be used to set any property in self or partner profile. It is specially useful in setting properties not interpreted by AS2Sender AS2Receivercomponents and thus not exposed as AS2ProfileMgr properties.

Error Event (AS2ProfileMgr Component)

Fired when information is available about errors during data delivery.

Syntax

public event OnErrorHandler OnError;

public delegate void OnErrorHandler(object sender, AS2ProfileMgrErrorEventArgs e);

public class AS2ProfileMgrErrorEventArgs : EventArgs {
  public int ErrorCode { get; }
  public string Description { get; }
}

Public Event OnError As OnErrorHandler

Public Delegate Sub OnErrorHandler(sender As Object, e As AS2ProfileMgrErrorEventArgs)

Public Class AS2ProfileMgrErrorEventArgs Inherits EventArgs
  Public ReadOnly Property ErrorCode As Integer
  Public ReadOnly Property Description As String
End Class

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component throws an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Partner Event (AS2ProfileMgr Component)

Fired when ListPartners is invoked.

Syntax

public event OnPartnerHandler OnPartner;

public delegate void OnPartnerHandler(object sender, AS2ProfileMgrPartnerEventArgs e);

public class AS2ProfileMgrPartnerEventArgs : EventArgs {
  public string partnerIdentifier { get; }
  public string partnerURL { get; }
}

Public Event OnPartner As OnPartnerHandler

Public Delegate Sub OnPartnerHandler(sender As Object, e As AS2ProfileMgrPartnerEventArgs)

Public Class AS2ProfileMgrPartnerEventArgs Inherits EventArgs
  Public ReadOnly Property partnerIdentifier As String
  Public ReadOnly Property partnerURL As String
End Class

Remarks

This event is fired when ListPartners is called. It fires for each partner found by the AS2ProfileMgr in DataDir. The parameter partnerIdentifier is same as provided to SaveProfile to save the partner profile. The URL provided by the trading partner to post AS2 messages can be read from partnerURL.

PartnerDirectory Event (AS2ProfileMgr Component)

Fired before accessing partner.cfg of a trading partner.

Syntax

public event OnPartnerDirectoryHandler OnPartnerDirectory;

public delegate void OnPartnerDirectoryHandler(object sender, AS2ProfileMgrPartnerDirectoryEventArgs e);

public class AS2ProfileMgrPartnerDirectoryEventArgs : EventArgs {
  public string Name { get; }
  public string Directory { get; set; }
}

Public Event OnPartnerDirectory As OnPartnerDirectoryHandler

Public Delegate Sub OnPartnerDirectoryHandler(sender As Object, e As AS2ProfileMgrPartnerDirectoryEventArgs)

Public Class AS2ProfileMgrPartnerDirectoryEventArgs Inherits EventArgs
  Public ReadOnly Property Name As String
  Public Property Directory As String
End Class

Remarks

This event is fired every time partner.cfg needs to be accessed i.e when LoadProfile or GetTPInfo are invoked with partner name not being "self". The Name provides the partner name and Directory indicates the directory in which partner profile is expected. Setting Directory to a different path will make the component look for partner.cfg in that directory. Note: PartnerDirectory event is not fired when ListPartners is invoked.

Property Event (AS2ProfileMgr Component)

Fired when ListProperties is invoked.

Syntax

public event OnPropertyHandler OnProperty;

public delegate void OnPropertyHandler(object sender, AS2ProfileMgrPropertyEventArgs e);

public class AS2ProfileMgrPropertyEventArgs : EventArgs {
  public string propName { get; }
  public string propValue { get; }
}

Public Event OnProperty As OnPropertyHandler

Public Delegate Sub OnPropertyHandler(sender As Object, e As AS2ProfileMgrPropertyEventArgs)

Public Class AS2ProfileMgrPropertyEventArgs Inherits EventArgs
  Public ReadOnly Property propName As String
  Public ReadOnly Property propValue As String
End Class

Remarks

This event is fired when ListProperties is called. It fires for each property read by LoadProfile. The parameters propName and propValue provide property name and value respectively.

Certificate Type

This is the digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

The following fields are available:
  • EffectiveDate
  • ExpirationDate
  • ExtendedKeyUsage
  • Fingerprint
  • FingerprintSHA1
  • FingerprintSHA256
  • Issuer
  • PrivateKey
  • PrivateKeyAvailable
  • PrivateKeyContainer
  • PublicKey
  • PublicKeyAlgorithm
  • PublicKeyLength
  • SerialNumber
  • SignatureAlgorithm
  • Store
  • StorePassword
  • StoreType
  • SubjectAltNames
  • ThumbprintMD5
  • ThumbprintSHA1
  • ThumbprintSHA256
  • Usage
  • UsageFlags
  • Version
  • Subject
  • Encoded

    • Fields

    EffectiveDate
    string (read-only)
    Default: ""

    The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

    23-Jan-2000 15:00:00.

    ExpirationDate
    string (read-only)
    Default: ""

    The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

    23-Jan-2001 15:00:00.

    ExtendedKeyUsage
    string (read-only)
    Default: ""

    A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

    Fingerprint
    string (read-only)
    Default: ""

    The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

    The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

    FingerprintSHA1
    string (read-only)
    Default: ""

    The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

    The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

    FingerprintSHA256
    string (read-only)
    Default: ""

    The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

    The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

    Issuer
    string (read-only)
    Default: ""

    The issuer of the certificate. This field contains a string representation of the name of the issuing authority for the certificate.

    PrivateKey
    string (read-only)
    Default: ""

    The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

    Note: The PrivateKey may be available but not exportable. In this case, PrivateKey returns an empty string.

    PrivateKeyAvailable
    bool (read-only)
    Default: False

    Whether a PrivateKey is available for the selected certificate. If PrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

    PrivateKeyContainer
    string (read-only)
    Default: ""

    The name of the PrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

    PublicKey
    string (read-only)
    Default: ""

    The public key of the certificate. The key is provided as PEM/Base64-encoded data.

    PublicKeyAlgorithm
    string (read-only)
    Default: ""

    The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

    PublicKeyLength
    int (read-only)
    Default: 0

    The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

    SerialNumber
    string (read-only)
    Default: ""

    The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

    SignatureAlgorithm
    string (read-only)
    Default: ""

    The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

    Store
    string
    Default: "MY"

    The name of the certificate store for the client certificate.

    The StoreType field denotes the type of the certificate store specified by Store. If the store is password-protected, specify the password in StorePassword.

    Store is used in conjunction with the Subject field to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject field for details.

    Designations of certificate stores are platform dependent.

    The following designations are the most common User and Machine certificate stores in Windows:

    MYA certificate store holding personal certificates with their associated private keys.
    CACertifying authority certificates.
    ROOTRoot certificates.

    When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

    StoreB
    byte []
    Default: "MY"

    The name of the certificate store for the client certificate.

    The StoreType field denotes the type of the certificate store specified by Store. If the store is password-protected, specify the password in StorePassword.

    Store is used in conjunction with the Subject field to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject field for details.

    Designations of certificate stores are platform dependent.

    The following designations are the most common User and Machine certificate stores in Windows:

    MYA certificate store holding personal certificates with their associated private keys.
    CACertifying authority certificates.
    ROOTRoot certificates.

    When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

    StorePassword
    string
    Default: ""

    If the type of certificate store requires a password, this field is used to specify the password needed to open the certificate store.

    StoreType
    CertStoreTypes
    Default: 0

    The type of certificate store for this certificate.

    The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This field can take one of the following values:

    0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user.

    Note: This store type is not available in Java.

    1 (cstMachine)For Windows, this specifies that the certificate store is a machine store.

    Note: This store type is not available in Java.

    2 (cstPFXFile)The certificate store is the name of a PFX (PKCS#12) file containing certificates.
    3 (cstPFXBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
    4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates.

    Note: This store type is only available in Java.

    5 (cstJKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.

    Note: This store type is only available in Java.

    6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
    7 (cstPEMKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
    8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
    9 (cstPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
    10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
    11 (cstP7BFile)The certificate store is the name of a PKCS#7 file containing certificates.
    12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
    13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
    14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
    15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
    16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
    17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
    18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
    19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
    21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).

    Note: This store type is only available in Java and .NET.

    22 (cstBCFKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.

    Note: This store type is only available in Java and .NET.

    23 (cstPKCS11)The certificate is present on a physical security key accessible via a PKCS#11 interface.

    To use a security key, the necessary data must first be collected using the CertMgr component. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

    When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN.

    Code Example. SSH Authentication with Security Key: certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

    99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

    SubjectAltNames
    string (read-only)
    Default: ""

    Comma-separated lists of alternative subject names for the certificate.

    ThumbprintMD5
    string (read-only)
    Default: ""

    The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

    ThumbprintSHA1
    string (read-only)
    Default: ""

    The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

    ThumbprintSHA256
    string (read-only)
    Default: ""

    The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

    Usage
    string (read-only)
    Default: ""

    The text description of UsageFlags.

    This value will be one or more of the following strings and will be separated by commas:

    • Digital Signature
    • Non-Repudiation
    • Key Encipherment
    • Data Encipherment
    • Key Agreement
    • Certificate Signing
    • CRL Signing
    • Encipher Only

    If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

    UsageFlags
    int (read-only)
    Default: 0

    The flags that show intended use for the certificate. The value of UsageFlags is a combination of the following flags:

    0x80Digital Signature
    0x40Non-Repudiation
    0x20Key Encipherment
    0x10Data Encipherment
    0x08Key Agreement
    0x04Certificate Signing
    0x02CRL Signing
    0x01Encipher Only

    Please see the Usage field for a text representation of UsageFlags.

    This functionality currently is not available when the provider is OpenSSL.

    Version
    string (read-only)
    Default: ""

    The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

    Subject
    string
    Default: ""

    The subject of the certificate used for client authentication.

    This field will be populated with the full subject of the loaded certificate. When loading a certificate, the subject is used to locate the certificate in the store.

    If an exact match is not found, the store is searched for subjects containing the value of the property.

    If a match is still not found, the property is set to an empty string, and no certificate is selected.

    The special value "*" picks a random certificate in the certificate store.

    The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

    FieldMeaning
    CNCommon Name. This is commonly a hostname like www.server.com.
    OOrganization
    OUOrganizational Unit
    LLocality
    SState
    CCountry
    EEmail Address

    If a field value contains a comma, it must be quoted.

    Encoded
    string
    Default: ""

    The certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate.

    When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

    EncodedB
    byte []
    Default: ""

    The certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate.

    When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

    Constructors

    public Certificate();

    Public Certificate()

    Creates a instance whose properties can be set. This is useful for use with when generating new certificates. 

    public Certificate(string certificateFile);

    Public Certificate(ByVal CertificateFile As String)

    Opens CertificateFile and reads out the contents as an X.509 public key. 

    public Certificate(byte[] encoded);

    Public Certificate(ByVal Encoded As Byte())

    Parses Encoded as an X.509 public key. 

    public Certificate(CertStoreTypes storeType, string store, string storePassword, string subject);

    Public Certificate(ByVal StoreType As CertStoreTypes, ByVal Store As String, ByVal StorePassword As String, ByVal Subject As String)

    StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store.

    After the store has been successfully opened, the component will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format. 

    public Certificate(CertStoreTypes storeType, string store, string storePassword, string subject, string configurationString);

    Public Certificate(ByVal StoreType As CertStoreTypes, ByVal Store As String, ByVal StorePassword As String, ByVal Subject As String, ByVal ConfigurationString As String)

    StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store.

    ConfigurationString is a newline-separated list of name-value pairs that may be used to modify the default behavior. Possible values include "PersistPFXKey", which shows whether or not the PFX key is persisted after performing operations with the private key. This correlates to the PKCS12_NO_PERSIST_KEY CryptoAPI option. The default value is True (the key is persisted). "Thumbprint" - an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load. When specified, this value is used to select the certificate in the store. This is applicable to the cstUser , cstMachine , cstPublicKeyFile , and cstPFXFile store types. "UseInternalSecurityAPI" shows whether the platform (default) or the internal security API is used when performing certificate-related operations.

    After the store has been successfully opened, the component will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format. 

    public Certificate(CertStoreTypes storeType, string store, string storePassword, byte[] encoded);

    Public Certificate(ByVal StoreType As CertStoreTypes, ByVal Store As String, ByVal StorePassword As String, ByVal Encoded As Byte())

    StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store.

    After the store has been successfully opened, the component will load Encoded as an X.509 certificate and search the opened store for a corresponding private key. 

    public Certificate(CertStoreTypes storeType, byte[] store, string storePassword, string subject);

    Public Certificate(ByVal StoreType As CertStoreTypes, ByVal Store As Byte(), ByVal StorePassword As String, ByVal Subject As String)

    StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a byte array containing the certificate data. StorePassword is the password used to protect the store.

    After the store has been successfully opened, the component will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format. 

    public Certificate(CertStoreTypes storeType, byte[] store, string storePassword, string subject, string configurationString);

    Public Certificate(ByVal StoreType As CertStoreTypes, ByVal Store As Byte(), ByVal StorePassword As String, ByVal Subject As String, ByVal ConfigurationString As String)

    StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a byte array containing the certificate data. StorePassword is the password used to protect the store.

    After the store has been successfully opened, the component will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format. 

    public Certificate(CertStoreTypes storeType, byte[] store, string storePassword, byte[] encoded);

    Public Certificate(ByVal StoreType As CertStoreTypes, ByVal Store As Byte(), ByVal StorePassword As String, ByVal Encoded As Byte())

    StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a byte array containing the certificate data. StorePassword is the password used to protect the store.

    After the store has been successfully opened, the component will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

    Config Settings (AS2ProfileMgr Component)

    The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

    Base Config Settings

    BuildInfo:   Information about the product's build.

    When queried, this setting will return a string containing information about the product's build.

    GUIAvailable:   Whether or not a message loop is available for processing events.

    In a GUI-based application, long-running blocking operations may cause the application to stop responding to input until the operation returns. The component will attempt to discover whether or not the application has a message loop and, if one is discovered, it will process events in that message loop during any such blocking operation.

    In some non-GUI applications, an invalid message loop may be discovered that will result in errant behavior. In these cases, setting GUIAvailable to false will ensure that the component does not attempt to process external events.

    LicenseInfo:   Information about the current license.

    When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

    • Product: The product the license is for.
    • Product Key: The key the license was generated from.
    • License Source: Where the license was found (e.g., RuntimeLicense, License File).
    • License Type: The type of license installed (e.g., Royalty Free, Single Server).
    • Last Valid Build: The last valid build number for which the license will work.
    MaskSensitiveData:   Whether sensitive data is masked in log messages.

    In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.

    This setting only works on these components: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

    UseFIPSCompliantAPI:   Tells the component whether or not to use FIPS certified APIs.

    When set to true, the component will utilize the underlying operating system's certified APIs. Java editions, regardless of OS, utilize Bouncy Castle Federal Information Processing Standards (FIPS), while all other Windows editions make use of Microsoft security libraries.

    FIPS mode can be enabled by setting the UseFIPSCompliantAPI configuration setting to true. This is a static setting that applies to all instances of all components of the toolkit within the process. It is recommended to enable or disable this setting once before the component has been used to establish a connection. Enabling FIPS while an instance of the component is active and connected may result in unexpected behavior.

    For more details, please see the FIPS 140-2 Compliance article.

    Note: This setting is applicable only on Windows.

    Note: Enabling FIPS compliance requires a special license; please contact sales@nsoftware.com for details.

    UseInternalSecurityAPI:   Whether or not to use the system security libraries or an internal implementation.

    When set to false, the component will use the system security libraries by default to perform cryptographic functions where applicable. In this case, calls to unmanaged code will be made. In certain environments, this is not desirable. To use a completely managed security implementation, set this setting to true.

    Setting this configuration setting to true tells the component to use the internal implementation instead of using the system security libraries.

    On Windows, this setting is set to false by default. On Linux/macOS, this setting is set to true by default.

    If using the .NET Standard Library, this setting will be true on all platforms. The .NET Standard library does not support using the system security libraries.

    Note: This setting is static. The value set is applicable to all components used in the application.

    When this value is set, the product's system dynamic link library (DLL) is no longer required as a reference, as all unmanaged code is stored in that file.

    Trappable Errors (AS2ProfileMgr Component)

    AS2ProfileMgr Errors

    601   Cannot access data directory.
    602   This operation requires data directory to be set.
    603   Cannot save personal profile.
    604   Cannot load personal profile.
    605   Cannot save partner profile.
    606   Cannot load partner profile.