IMAP Class

Properties   Methods   Events   Config Settings   Errors  

The IMAP Class is used to communicate with IMAP servers using the Internet Message Access Protocol (IMAP).

Class Name

IPWorksEDI_IMAP

Procedural Interface

 ipworksedi_imap_open();
 ipworksedi_imap_close($res);
 ipworksedi_imap_register_callback($res, $id, $function);
 ipworksedi_imap_get_last_error($res);
 ipworksedi_imap_get_last_error_code($res);
 ipworksedi_imap_set($res, $id, $index, $value);
 ipworksedi_imap_get($res, $id, $index);
 ipworksedi_imap_do_addmessageflags($res, $flags);
 ipworksedi_imap_do_appendtomailbox($res);
 ipworksedi_imap_do_checkmailbox($res);
 ipworksedi_imap_do_closemailbox($res);
 ipworksedi_imap_do_config($res, $configurationstring);
 ipworksedi_imap_do_connect($res);
 ipworksedi_imap_do_copytomailbox($res);
 ipworksedi_imap_do_createmailbox($res);
 ipworksedi_imap_do_deletefrommailbox($res);
 ipworksedi_imap_do_deletemailbox($res);
 ipworksedi_imap_do_deletemailboxacl($res, $user);
 ipworksedi_imap_do_disconnect($res);
 ipworksedi_imap_do_doevents($res);
 ipworksedi_imap_do_examinemailbox($res);
 ipworksedi_imap_do_expungemailbox($res);
 ipworksedi_imap_do_getmailboxacl($res);
 ipworksedi_imap_do_interrupt($res);
 ipworksedi_imap_do_listmailboxes($res);
 ipworksedi_imap_do_listsubscribedmailboxes($res);
 ipworksedi_imap_do_localizedate($res, $datetime);
 ipworksedi_imap_do_movetomailbox($res);
 ipworksedi_imap_do_noop($res);
 ipworksedi_imap_do_renamemailbox($res, $newname);
 ipworksedi_imap_do_reset($res);
 ipworksedi_imap_do_resetmessageflags($res);
 ipworksedi_imap_do_retrievemessageheaders($res);
 ipworksedi_imap_do_retrievemessageinfo($res);
 ipworksedi_imap_do_retrievemessagepart($res, $partid);
 ipworksedi_imap_do_retrievemessagepartheaders($res, $partid);
 ipworksedi_imap_do_retrievemessagetext($res);
 ipworksedi_imap_do_searchmailbox($res, $searchcriteria);
 ipworksedi_imap_do_selectmailbox($res);
 ipworksedi_imap_do_sendcommand($res, $command);
 ipworksedi_imap_do_setmailboxacl($res, $user, $rights);
 ipworksedi_imap_do_startidle($res);
 ipworksedi_imap_do_stopidle($res);
 ipworksedi_imap_do_subscribemailbox($res);
 ipworksedi_imap_do_unsetmessageflags($res);
 ipworksedi_imap_do_unsubscribemailbox($res);

Remarks

The IMAP Class supports both plaintext and Secure Sockets Layer/Transport Layer Security (SSL/TLS) connections (RFC 2595). When connecting over Secure Sockets Layer/Transport Layer Security (SSL/TLS) the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL-related settings are also supported through the Config method.

The IMAP Class implements a standard IMAP client as specified in RFC 1730 and RFC 2060.

The first step in using the class is specifying a MailServer, a User to connect as, and a Password to authenticate with. After that, one or more requests may be sent to the server via the class's methods. Results are retrieved through events and a number of key properties.

Normally, after connecting to the server, a Mailbox is selected (or examined) using the ExamineMailbox method. After the Mailbox is selected, MessageCount and RecentMessageCount show the number of messages in the mailbox, and MailboxFlags show the flags pertaining to the mailbox.

A number of operations may be performed by the server in response to commands sent using the class's methods. The primary arguments for most commands are the Mailbox property and the MessageSet property. The MessageSet property denotes either a single message, or a range of messages. Other arguments are specified through other properties, such as SortCriteria and MessageFlags.

Responses are received through events, such as MessageInfo and MailboxList, and also are reflected to properties, such as MessageText and MessageSubject.

The MessagePart event describes the MIME structure of the retrieved messages. One MessagePart event is fired for every message part, giving information about the particular part. Later on, message parts may be retrieved separately through the RetrieveMessagePart method. This speeds up processing by avoiding the need to retrieve full messages from the server.

The PITrail event traces the interaction between the client and the server. It includes all exchanges except for transfers of messages, message parts, and message headers.

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.

AuthMechanism Property (IPWorksEDI_IMAP Class)

This property includes the authentication mechanism to be used when connecting to the mail server.

Object Oriented Interface

public function getAuthMechanism();
public function setAuthMechanism($value);

Procedural Interface

ipworksedi_imap_get($res, 1 );
ipworksedi_imap_set($res, 1, $value );

Default Value

0

Remarks

Data Type

Integer

AutoDecodeParts Property (IPWorksEDI_IMAP Class)

This property determines whether or not to automatically decode message parts.

Object Oriented Interface

public function getAutoDecodeParts();
public function setAutoDecodeParts($value);

Procedural Interface

ipworksedi_imap_get($res, 2 );
ipworksedi_imap_set($res, 2, $value );

Default Value

false

Remarks

This property determines whether or not to automatically decode message parts. Message parts, especially binary message parts, are normally sent by the server encoded (Base64 or other format). If this setting is True, the parts are automatically decoded while being received.

Data Type

Boolean

Connected Property (IPWorksEDI_IMAP Class)

Whether the class is connected.

Object Oriented Interface

public function getConnected();

Procedural Interface

ipworksedi_imap_get($res, 3 );

Default Value

false

Remarks

This property is used to determine whether or not the class is connected to the remote host. Use the Connect and Disconnect methods to manage the connection.

This property is read-only and not available at design time.

Data Type

Boolean

EndByte Property (IPWorksEDI_IMAP Class)

This property includes the byte index of the position where the transfer should end.

Object Oriented Interface

public function getEndByte();
public function setEndByte($value);

Procedural Interface

ipworksedi_imap_get($res, 4 );
ipworksedi_imap_set($res, 4, $value );

Default Value

0

Remarks

StartByte and EndByte are used together with the RetrieveMessagePart method to specify the portion of the message to be retrieved from the server.

When StartByte or EndByte contain values other than the default (0), only the corresponding portion of the message is retrieved from the server.

Byte indexes start from 1. The default value for EndByte is 0, which corresponds to the end of the message.

This property is not available at design time.

Data Type

Long64

FirewallAutoDetect Property (IPWorksEDI_IMAP Class)

Whether to automatically detect and use firewall system settings, if available.

Object Oriented Interface

public function getFirewallAutoDetect();
public function setFirewallAutoDetect($value);

Procedural Interface

ipworksedi_imap_get($res, 5 );
ipworksedi_imap_set($res, 5, $value );

Default Value

false

Remarks

Whether to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (IPWorksEDI_IMAP Class)

The type of firewall to connect through.

Object Oriented Interface

public function getFirewallType();
public function setFirewallType($value);

Procedural Interface

ipworksedi_imap_get($res, 6 );
ipworksedi_imap_set($res, 6, $value );

Default Value

0

Remarks

The type of firewall to connect through. The applicable values are as follows:

Data Type

Integer

FirewallHost Property (IPWorksEDI_IMAP Class)

The name or IP address of the firewall (optional).

Object Oriented Interface

public function getFirewallHost();
public function setFirewallHost($value);

Procedural Interface

ipworksedi_imap_get($res, 7 );
ipworksedi_imap_set($res, 7, $value );

Default Value

''

Remarks

The name or IP address of the firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the class fails with an error.

Data Type

String

FirewallPassword Property (IPWorksEDI_IMAP Class)

A password if authentication is to be used when connecting through the firewall.

Object Oriented Interface

public function getFirewallPassword();
public function setFirewallPassword($value);

Procedural Interface

ipworksedi_imap_get($res, 8 );
ipworksedi_imap_set($res, 8, $value );

Default Value

''

Remarks

A password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the class fails with an error.

Data Type

String

FirewallPort Property (IPWorksEDI_IMAP Class)

The Transmission Control Protocol (TCP) port for the firewall Host .

Object Oriented Interface

public function getFirewallPort();
public function setFirewallPort($value);

Procedural Interface

ipworksedi_imap_get($res, 9 );
ipworksedi_imap_set($res, 9, $value );

Default Value

0

Remarks

The Transmission Control Protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (IPWorksEDI_IMAP Class)

A username if authentication is to be used when connecting through a firewall.

Object Oriented Interface

public function getFirewallUser();
public function setFirewallUser($value);

Procedural Interface

ipworksedi_imap_get($res, 10 );
ipworksedi_imap_set($res, 10, $value );

Default Value

''

Remarks

A username if authentication is to be used when connecting through a firewall. If FirewallHost is specified, this property and the FirewallPassword property are used to connect and authenticate to the given Firewall. If the authentication fails, the class fails with an error.

Data Type

String

Idle Property (IPWorksEDI_IMAP Class)

The current status of the class.

Object Oriented Interface

public function getIdle();

Procedural Interface

ipworksedi_imap_get($res, 11 );

Default Value

true

Remarks

This property will be False if the component is currently busy (communicating or waiting for an answer), and True at all other times.

This property is read-only.

Data Type

Boolean

LastReply Property (IPWorksEDI_IMAP Class)

This property indicates the last reply received from the server.

Object Oriented Interface

public function getLastReply();

Procedural Interface

ipworksedi_imap_get($res, 12 );

Default Value

''

Remarks

This property indicates the last reply received from the server. It can be used for informational purposes. The same information and more also can be retrieved through the PITrail event.

This property is read-only.

Data Type

String

LocalFile Property (IPWorksEDI_IMAP Class)

This property includes the path to a local file for downloading the message body.

Object Oriented Interface

public function getLocalFile();
public function setLocalFile($value);

Procedural Interface

ipworksedi_imap_get($res, 13 );
ipworksedi_imap_set($res, 13, $value );

Default Value

''

Remarks

This property is used when retrieving a message. If the file exists, and the Overwrite property is set to true, then the component will overwrite the file.

If this property is empty, then the received data is provided through the MessageText property and the parameters for the Transfer event.

Data Type

String

LocalHost Property (IPWorksEDI_IMAP Class)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Object Oriented Interface

public function getLocalHost();
public function setLocalHost($value);

Procedural Interface

ipworksedi_imap_get($res, 14 );
ipworksedi_imap_set($res, 14, $value );

Default Value

''

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

Mailbox Property (IPWorksEDI_IMAP Class)

This property includes the name of the mailbox selected on the server.

Object Oriented Interface

public function getMailbox();
public function setMailbox($value);

Procedural Interface

ipworksedi_imap_get($res, 15 );
ipworksedi_imap_set($res, 15, $value );

Default Value

'Inbox'

Remarks

This method contains the name of the mailbox selected on the server and also is used as argument to most methods. Please refer to the class methods for more information.

Example 1. Open a Mailbox in Read/Write Mode:

IMAPControl.Mailbox = "INBOX" IMAPControl.SelectMailbox

Example 2. Open a Mailbox in Read-Only Mode:

IMAPControl.Mailbox = "INBOX.Folder" IMAPControl.ExamineMailbox

Data Type

String

MailboxFlags Property (IPWorksEDI_IMAP Class)

This property defines flags in the selected mailbox.

Object Oriented Interface

public function getMailboxFlags();

Procedural Interface

ipworksedi_imap_get($res, 16 );

Default Value

''

Remarks

This property defines flags in the selected mailbox. The class fills out MessageCount, RecentMessageCount, and MailboxFlags after connecting to the MailServer and selecting or examining a Mailbox.

This property is read-only and not available at design time.

Data Type

String

MailboxListCount Property (IPWorksEDI_IMAP Class)

The number of records in the MailboxList arrays.

Object Oriented Interface

public function getMailboxListCount();

Procedural Interface

ipworksedi_imap_get($res, 17 );

Default Value

0

Remarks

This property controls the size of the following arrays:

• MailboxListFlags
• MailboxListName
• MailboxListSeparator

The array indices start at 0 and end at MailboxListCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

MailboxListFlags Property (IPWorksEDI_IMAP Class)

This property contains the mailbox flags in a mailbox listing.

Object Oriented Interface

public function getMailboxListFlags($mailboxlistindex);

Procedural Interface

ipworksedi_imap_get($res, 18 , $mailboxlistindex);

Default Value

''

Remarks

This property contains the mailbox flags in a mailbox listing.

Examples of possible flag values are server dependent, but they can include the following:

The $mailboxlistindex parameter specifies the index of the item in the array. The size of the array is controlled by the MailboxListCount property.

This property is read-only and not available at design time.

Data Type

String

MailboxListName Property (IPWorksEDI_IMAP Class)

This property contains the mailbox name in a mailbox listing.

Object Oriented Interface

public function getMailboxListName($mailboxlistindex);

Procedural Interface

ipworksedi_imap_get($res, 19 , $mailboxlistindex);

Default Value

''

Remarks

This property contains the mailbox name in a mailbox listing.

The $mailboxlistindex parameter specifies the index of the item in the array. The size of the array is controlled by the MailboxListCount property.

This property is read-only and not available at design time.

Data Type

String

MailboxListSeparator Property (IPWorksEDI_IMAP Class)

The Separator property contains the character that separates the different parts in the mailbox path hierarchy.

Object Oriented Interface

public function getMailboxListSeparator($mailboxlistindex);

Procedural Interface

ipworksedi_imap_get($res, 20 , $mailboxlistindex);

Default Value

''

Remarks

The MailboxListSeparator property contains the character that separates the different parts in the mailbox path hierarchy.

The $mailboxlistindex parameter specifies the index of the item in the array. The size of the array is controlled by the MailboxListCount property.

This property is read-only and not available at design time.

Data Type

String

MailPort Property (IPWorksEDI_IMAP Class)

This property includes the port of the IMAP server (default is 143).

Object Oriented Interface

public function getMailPort();
public function setMailPort($value);

Procedural Interface

ipworksedi_imap_get($res, 21 );
ipworksedi_imap_set($res, 21, $value );

Default Value

143

Remarks

A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

For the implicit Secure Sockets Layer (SSL), use port 993 (please refer to the SSLStartMode property for more information).

This property is not available at design time.

Data Type

Integer

MailServer Property (IPWorksEDI_IMAP Class)

This property includes the name or address of the mail server (IMAP server).

Object Oriented Interface

public function getMailServer();
public function setMailServer($value);

Procedural Interface

ipworksedi_imap_get($res, 22 );
ipworksedi_imap_set($res, 22, $value );

Default Value

''

Remarks

This property specifies the IP address (IP number in dotted internet format) or domain name of the mail server. It must be set before a connection is attempted and cannot be changed once a connection is in progress.

If this property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the MailServer property is set to the corresponding address. If the search is not successful, an error is returned.

If the class is configured to use a SOCKS firewall, the value assigned to this property may be preceded with an "*". If this is the case, the host name is passed to the firewall unresolved and the firewall performs the DNS resolution.

Data Type

String

Message Property (IPWorksEDI_IMAP Class)

This property provides the raw message content.

Object Oriented Interface

public function getMessage();
public function setMessage($value);

Procedural Interface

ipworksedi_imap_get($res, 23 );
ipworksedi_imap_set($res, 23, $value );

Default Value

''

Remarks

This property is populated after calling RetrieveMessagePart and holds the raw message content. This can be used to access the data before any processing is done by the class.

This property is not available at design time.

Data Type

Binary String

MessageContentEncoding Property (IPWorksEDI_IMAP Class)

This property includes the ContentEncoding of the selected message.

Object Oriented Interface

public function getMessageContentEncoding();

Procedural Interface

ipworksedi_imap_get($res, 24 );

Default Value

''

Remarks

The property is automatically set by the class when message information is retrieved through the RetrieveMessageInfo method.

This property is read-only and not available at design time.

Data Type

String

MessageContentType Property (IPWorksEDI_IMAP Class)

This property includes the ContentType of the message.

Object Oriented Interface

public function getMessageContentType();

Procedural Interface

ipworksedi_imap_get($res, 25 );

Default Value

''

Remarks

This property denotes the type of content contained in the message, such as plain, multipart, or multipart/alternative. You also may need to check the MessageContentEncoding property or read the individual message parts.

This property is read-only and not available at design time.

Data Type

String

MessageCount Property (IPWorksEDI_IMAP Class)

This property includes the total number of messages on the Mailbox .

Object Oriented Interface

public function getMessageCount();

Procedural Interface

ipworksedi_imap_get($res, 26 );

Default Value

0

Remarks

This property contains the total number of messages on the Mailbox. The class fills out MessageCount, RecentMessageCount, and MailboxFlags after connecting to the MailServer and selecting or examining a Mailbox.

This property is read-only.

Data Type

Integer

MessageDate Property (IPWorksEDI_IMAP Class)

The property includes the time the message was created.

Object Oriented Interface

public function getMessageDate();

Procedural Interface

ipworksedi_imap_get($res, 27 );

Default Value

''

Remarks

This property contains the date and time when the message was created. This value is taken from the ENVELOPE structure of the message corresponding to the date.

RFC 822 contains detailed date format specifications. An example of a valid date is "Fri, 1 Mar 96 21:24:52 EST".

This property is read-only and not available at design time.

Data Type

String

MessageDeliveryTime Property (IPWorksEDI_IMAP Class)

This property includes the time the message was delivered to the mail server.

Object Oriented Interface

public function getMessageDeliveryTime();

Procedural Interface

ipworksedi_imap_get($res, 28 );

Default Value

''

Remarks

This property contains the time the message was delivered to the mail server. This value is taken from the INTERNALDATE property of the message. The time format is defined in RFC 821.

This property is read-only and not available at design time.

Data Type

String

MessageFlags Property (IPWorksEDI_IMAP Class)

This property contains the flags of the current message.

Object Oriented Interface

public function getMessageFlags();
public function setMessageFlags($value);

Procedural Interface

ipworksedi_imap_get($res, 29 );
ipworksedi_imap_set($res, 29, $value );

Default Value

''

Remarks

This property contains the flags of the current message. It also is used to specify flags when AppendToMailbox is called.

Examples of possible flag values are server dependent, but they can include the following:

IMAPControl.MessageSet = "1" IMAPControl.AddMessageFlags("\Deleted")

This property is not available at design time.

Data Type

String

MessageFrom Property (IPWorksEDI_IMAP Class)

This property includes the address of the author of the message.

Object Oriented Interface

public function getMessageFrom();

Procedural Interface

ipworksedi_imap_get($res, 30 );

Default Value

''

Remarks

This property normally has the same value as MessageSender.

In some cases, a message may have more than one From address. If this is the case, the addresses are provided in the MessageFrom property and are separated by commas.

This property is read-only and not available at design time.

Data Type

String

MessageHeaderCount Property (IPWorksEDI_IMAP Class)

The number of records in the MessageHeader arrays.

Object Oriented Interface

public function getMessageHeaderCount();
public function setMessageHeaderCount($value);

Procedural Interface

ipworksedi_imap_get($res, 31 );
ipworksedi_imap_set($res, 31, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

• MessageHeaderField
• MessageHeaderValue

The array indices start at 0 and end at MessageHeaderCount - 1.

This property is not available at design time.

Data Type

Integer

MessageHeaderField Property (IPWorksEDI_IMAP Class)

This property contains the name of the HTTP header (this is the same case as it is delivered).

Object Oriented Interface

public function getMessageHeaderField($messageheaderindex);
public function setMessageHeaderField($messageheaderindex, $value);

Procedural Interface

ipworksedi_imap_get($res, 32 , $messageheaderindex);
ipworksedi_imap_set($res, 32, $value , $messageheaderindex);

Default Value

''

Remarks

This property contains the name of the HTTP Header (this is the same case as it is delivered).

The $messageheaderindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageHeaderCount property.

This property is not available at design time.

Data Type

String

MessageHeaderValue Property (IPWorksEDI_IMAP Class)

This property contains the header contents.

Object Oriented Interface

public function getMessageHeaderValue($messageheaderindex);
public function setMessageHeaderValue($messageheaderindex, $value);

Procedural Interface

ipworksedi_imap_get($res, 33 , $messageheaderindex);
ipworksedi_imap_set($res, 33, $value , $messageheaderindex);

Default Value

''

Remarks

This property contains the Header contents.

The $messageheaderindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageHeaderCount property.

This property is not available at design time.

Data Type

String

MessageHeadersString Property (IPWorksEDI_IMAP Class)

This property includes the string version of the RFC 822-encoded headers in the message.

Object Oriented Interface

public function getMessageHeadersString();
public function setMessageHeadersString($value);

Procedural Interface

ipworksedi_imap_get($res, 34 );
ipworksedi_imap_set($res, 34, $value );

Default Value

''

Remarks

This property contains the full headers of the message in RFC 822 format. The headers are retrieved by calling the RetrieveMessageHeaders or the RetrieveMessagePartHeaders method.

This property is not available at design time.

Data Type

String

MessageId Property (IPWorksEDI_IMAP Class)

This property includes the message identifier of the current message.

Object Oriented Interface

public function getMessageId();

Procedural Interface

ipworksedi_imap_get($res, 35 );

Default Value

''

Remarks

The class fills out this property when message information is retrieved from the MailServer.

This Id is permanent if UIDMode is set, and otherwise is temporary.

This property is read-only and not available at design time.

Data Type

String

MessageInfoCount Property (IPWorksEDI_IMAP Class)

The number of records in the MessageInfo arrays.

Object Oriented Interface

public function getMessageInfoCount();

Procedural Interface

ipworksedi_imap_get($res, 36 );

Default Value

0

Remarks

This property controls the size of the following arrays:

• MessageInfoDate
• MessageInfoFlags
• MessageInfoFrom
• MessageInfoMessageId
• MessageInfoSize
• MessageInfoSubject

The array indices start at 0 and end at MessageInfoCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

MessageInfoDate Property (IPWorksEDI_IMAP Class)

This property contains the date of a message in a message information listing.

Object Oriented Interface

public function getMessageInfoDate($messageinfoindex);

Procedural Interface

ipworksedi_imap_get($res, 37 , $messageinfoindex);

Default Value

''

Remarks

This property contains the date of a message in a message information listing. This date is taken from the ENVELOPE structure of the message.

The $messageinfoindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageInfoCount property.

This property is read-only and not available at design time.

Data Type

String

MessageInfoFlags Property (IPWorksEDI_IMAP Class)

This property contains a message flag in a message information listing.

Object Oriented Interface

public function getMessageInfoFlags($messageinfoindex);

Procedural Interface

ipworksedi_imap_get($res, 38 , $messageinfoindex);

Default Value

''

Remarks

This property contains a message flag in a message information listing.

Examples of possible flag values are server dependent, but they can include the following:

The $messageinfoindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageInfoCount property.

This property is read-only and not available at design time.

Data Type

String

MessageInfoFrom Property (IPWorksEDI_IMAP Class)

This property contains the sender of a message in a message information listing.

Object Oriented Interface

public function getMessageInfoFrom($messageinfoindex);

Procedural Interface

ipworksedi_imap_get($res, 39 , $messageinfoindex);

Default Value

''

Remarks

This property contains the sender of a message in a message information listing.

The $messageinfoindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageInfoCount property.

This property is read-only and not available at design time.

Data Type

String

MessageInfoMessageId Property (IPWorksEDI_IMAP Class)

The unique identifier of a message in a message information listing.

Object Oriented Interface

public function getMessageInfoMessageId($messageinfoindex);

Procedural Interface

ipworksedi_imap_get($res, 40 , $messageinfoindex);

Default Value

''

Remarks

The unique identifier of a message in a message information listing.

The $messageinfoindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageInfoCount property.

This property is read-only and not available at design time.

Data Type

String

MessageInfoSize Property (IPWorksEDI_IMAP Class)

This property contains the size of a message in a message information listing.

Object Oriented Interface

public function getMessageInfoSize($messageinfoindex);

Procedural Interface

ipworksedi_imap_get($res, 41 , $messageinfoindex);

Default Value

0

Remarks

This property contains the size of a message in a message information listing.

The $messageinfoindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageInfoCount property.

This property is read-only and not available at design time.

Data Type

Long64

MessageInfoSubject Property (IPWorksEDI_IMAP Class)

This property contains the subject of a message in a message information listing.

Object Oriented Interface

public function getMessageInfoSubject($messageinfoindex);

Procedural Interface

ipworksedi_imap_get($res, 42 , $messageinfoindex);

Default Value

''

Remarks

This property contains the subject of a message in a message information listing.

The $messageinfoindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageInfoCount property.

This property is read-only and not available at design time.

Data Type

String

MessageInReplyTo Property (IPWorksEDI_IMAP Class)

This property includes the unique message identifier of the message being replied to.

Object Oriented Interface

public function getMessageInReplyTo();

Procedural Interface

ipworksedi_imap_get($res, 43 );

Default Value

''

Remarks

The class fills out this property with the value of the In-Reply-To: message header.

This value can be useful when threading messages by referring to the message being replied to.

The unique message identifier of the message itself is given by the MessageNetId property.

This property is read-only and not available at design time.

Data Type

String

MessageNetId Property (IPWorksEDI_IMAP Class)

This property includes the globally unique identifier of the message.

Object Oriented Interface

public function getMessageNetId();

Procedural Interface

ipworksedi_imap_get($res, 44 );

Default Value

''

Remarks

This property contains the globally unique identifier of the message. The class fills the MessageNetId with the value of the Message-Id: header. This is a globally unique value normally created by the first mail server the message is sent to.

This property is read-only and not available at design time.

Data Type

String

MessagePartCount Property (IPWorksEDI_IMAP Class)

The number of records in the MessagePart arrays.

Object Oriented Interface

public function getMessagePartCount();

Procedural Interface

ipworksedi_imap_get($res, 45 );

Default Value

0

Remarks

This property controls the size of the following arrays:

• MessagePartContentDisposition
• MessagePartContentEncoding
• MessagePartContentId
• MessagePartContentType
• MessagePartFileName
• MessagePartId
• MessagePartMultipartMode
• MessagePartParameters
• MessagePartSize

The array indices start at 0 and end at MessagePartCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

MessagePartContentDisposition Property (IPWorksEDI_IMAP Class)

This property shows the value of the Content-Disposition header of the message part.

Object Oriented Interface

public function getMessagePartContentDisposition($messagepartindex);

Procedural Interface

ipworksedi_imap_get($res, 46 , $messagepartindex);

Default Value

''

Remarks

This property shows the value of the Content-Disposition header of the message part.

The $messagepartindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessagePartCount property.

This property is read-only and not available at design time.

Data Type

String

MessagePartContentEncoding Property (IPWorksEDI_IMAP Class)

This property shows how the data are encoded.

Object Oriented Interface

public function getMessagePartContentEncoding($messagepartindex);

Procedural Interface

ipworksedi_imap_get($res, 47 , $messagepartindex);

Default Value

''

Remarks

This property shows how the data are encoded.

The $messagepartindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessagePartCount property.

This property is read-only and not available at design time.

Data Type

String

MessagePartContentId Property (IPWorksEDI_IMAP Class)

This property shows the value of the Content-Id header of the message part.

Object Oriented Interface

public function getMessagePartContentId($messagepartindex);

Procedural Interface

ipworksedi_imap_get($res, 48 , $messagepartindex);

Default Value

''

Remarks

This property shows the value of the Content-Id header of the message part.

The $messagepartindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessagePartCount property.

This property is read-only and not available at design time.

Data Type

String

MessagePartContentType Property (IPWorksEDI_IMAP Class)

This property shows the type of data contained in the message part.

Object Oriented Interface

public function getMessagePartContentType($messagepartindex);

Procedural Interface

ipworksedi_imap_get($res, 49 , $messagepartindex);

Default Value

''

Remarks

This property shows the type of data contained in the message part.

The $messagepartindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessagePartCount property.

This property is read-only and not available at design time.

Data Type

String

MessagePartFileName Property (IPWorksEDI_IMAP Class)

This property shows the filename corresponding to the part (if the part was included in the message as an attached file).

Object Oriented Interface

public function getMessagePartFileName($messagepartindex);

Procedural Interface

ipworksedi_imap_get($res, 50 , $messagepartindex);

Default Value

''

Remarks

This property shows the filename corresponding to the part (if the part was included in the message as an attached file).

The $messagepartindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessagePartCount property.

This property is read-only and not available at design time.

Data Type

String

MessagePartId Property (IPWorksEDI_IMAP Class)

This property contains the identifier of a part listing that may be identified in other parts or messages.

Object Oriented Interface

public function getMessagePartId($messagepartindex);

Procedural Interface

ipworksedi_imap_get($res, 51 , $messagepartindex);

Default Value

''

Remarks

This property contains the identifier of a part listing that may be identified in other parts or messages. The format of part identifiers is specified by the IMAP RFCs.

The $messagepartindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessagePartCount property.

This property is read-only and not available at design time.

Data Type

String

MessagePartMultipartMode Property (IPWorksEDI_IMAP Class)

This property shows how this part relates to the message's whole multipart structure (e.

Object Oriented Interface

public function getMessagePartMultipartMode($messagepartindex);

Procedural Interface

ipworksedi_imap_get($res, 52 , $messagepartindex);

Default Value

''

Remarks

This property shows how this part relates to the message's whole multipart structure (e.g., 'mixed' or 'alternative').

The $messagepartindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessagePartCount property.

This property is read-only and not available at design time.

Data Type

String

MessagePartParameters Property (IPWorksEDI_IMAP Class)

This property contains the additional parameters passed to the ContentType header, such as the part charset.

Object Oriented Interface

public function getMessagePartParameters($messagepartindex);

Procedural Interface

ipworksedi_imap_get($res, 53 , $messagepartindex);

Default Value

''

Remarks

This property contains the additional parameters passed to the ContentType header, such as the part charset.

The $messagepartindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessagePartCount property.

This property is read-only and not available at design time.

Data Type

String

MessagePartSize Property (IPWorksEDI_IMAP Class)

This property contains the size of a part in a message part listing.

Object Oriented Interface

public function getMessagePartSize($messagepartindex);

Procedural Interface

ipworksedi_imap_get($res, 54 , $messagepartindex);

Default Value

0

Remarks

This property contains the size of a part in a message part listing.

The $messagepartindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessagePartCount property.

This property is read-only and not available at design time.

Data Type

Long64

MessageRecipientCount Property (IPWorksEDI_IMAP Class)

The number of records in the MessageRecipient arrays.

Object Oriented Interface

public function getMessageRecipientCount();

Procedural Interface

ipworksedi_imap_get($res, 55 );

Default Value

0

Remarks

This property controls the size of the following arrays:

• MessageRecipientAddress
• MessageRecipientName
• MessageRecipientOptions
• MessageRecipientType

The array indices start at 0 and end at MessageRecipientCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

MessageRecipientAddress Property (IPWorksEDI_IMAP Class)

This property contains the email address of the recipient.

Object Oriented Interface

public function getMessageRecipientAddress($recipientindex);

Procedural Interface

ipworksedi_imap_get($res, 56 , $recipientindex);

Default Value

''

Remarks

This property contains the email address of the recipient.

The $recipientindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageRecipientCount property.

This property is read-only and not available at design time.

Data Type

String

MessageRecipientName Property (IPWorksEDI_IMAP Class)

This property contains the name of the recipient.

Object Oriented Interface

public function getMessageRecipientName($recipientindex);

Procedural Interface

ipworksedi_imap_get($res, 57 , $recipientindex);

Default Value

''

Remarks

This property contains the name of the recipient.

The $recipientindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageRecipientCount property.

This property is read-only and not available at design time.

Data Type

String

MessageRecipientOptions Property (IPWorksEDI_IMAP Class)

This property contains the recipient sending options (used only by SMTP).

Object Oriented Interface

public function getMessageRecipientOptions($recipientindex);

Procedural Interface

ipworksedi_imap_get($res, 58 , $recipientindex);

Default Value

''

Remarks

This property contains the recipient sending options (used only by SMTP). This must be a string of RFC-compliant recipient options (used by SMTP).

One type of option is a delivery status notification sent per recipient, which is specified by RFC 1891.

component.MessageRecipientOptions(0) = "NOTIFY SUCCESS,FAILURE,DELAY";

The $recipientindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageRecipientCount property.

This property is read-only and not available at design time.

Data Type

String

MessageRecipientType Property (IPWorksEDI_IMAP Class)

This property contains the recipient type: To, Cc, or Bcc.

Object Oriented Interface

public function getMessageRecipientType($recipientindex);

Procedural Interface

ipworksedi_imap_get($res, 59 , $recipientindex);

Default Value

0

Remarks

This property contains the recipient type: To, Cc, or Bcc.

The $recipientindex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageRecipientCount property.

This property is read-only and not available at design time.

Data Type

Integer

MessageReplyTo Property (IPWorksEDI_IMAP Class)

This property includes the email addresses to which replies to the message should be sent.

Object Oriented Interface

public function getMessageReplyTo();

Procedural Interface

ipworksedi_imap_get($res, 60 );

Default Value

''

Remarks

This property contains the email addresses to which replies to the message should be sent. In some cases, a message may have more than one Reply-To address. If this is the case, the addresses are provided in this property and are separated by commas.

This property is read-only and not available at design time.

Data Type

String

MessageSender Property (IPWorksEDI_IMAP Class)

This property includes the address of the sender of the message.

Object Oriented Interface

public function getMessageSender();

Procedural Interface

ipworksedi_imap_get($res, 61 );

Default Value

''

Remarks

This property contains the address of the sender of the message. This normally is the same value as MessageFrom.

In some cases, a message may have more than one sender. If this is the case, the addresses are provided in the MessageSender property and are separated by commas.

This property is read-only and not available at design time.

Data Type

String

MessageSet Property (IPWorksEDI_IMAP Class)

This property includes the set of messages to operate on.

Object Oriented Interface

public function getMessageSet();
public function setMessageSet($value);

Procedural Interface

ipworksedi_imap_get($res, 62 );
ipworksedi_imap_set($res, 62, $value );

Default Value

''

Remarks

This property indicates the set of messages to operate on. This is used as an argument to most method calls.

It may consist of a single message number, a range of messages specified by two message numbers separated by ':' (e.g. "1:5"), and/or individual message numbers separated by ',' (e.g. "1:5,7,10").

Example 1. Setting MessageSet:

IMAPControl.MessageSet = "1" IMAPControl.RetrieveMessageInfo() IMAPControl.MessageSet = "1:5" IMAPControl.RetrieveMessageInfo() IMAPControl.MessageSet = "1,5,7" IMAPControl.RetrieveMessageInfo()

Data Type

String

MessageSize Property (IPWorksEDI_IMAP Class)

This property includes the size of the selected message.

Object Oriented Interface

public function getMessageSize();

Procedural Interface

ipworksedi_imap_get($res, 63 );

Default Value

0

Remarks

The class fills out this property with the size of the selected message when message information is retrieved from the MailServer.

This property is read-only and not available at design time.

Data Type

Long64

MessageSubject Property (IPWorksEDI_IMAP Class)

This property includes the subject of the message.

Object Oriented Interface

public function getMessageSubject();

Procedural Interface

ipworksedi_imap_get($res, 64 );

Default Value

''

Remarks

The class fills out this property with the subject of the message when message information is retrieved from the MailServer.

This property is read-only and not available at design time.

Data Type

String

MessageText Property (IPWorksEDI_IMAP Class)

This property includes the body of the retrieved message.

Object Oriented Interface

public function getMessageText();
public function setMessageText($value);

Procedural Interface

ipworksedi_imap_get($res, 65 );
ipworksedi_imap_set($res, 65, $value );

Default Value

''

Remarks

The class fills out this property with the contents of the message body (in RFC 822 format) when a call to RetrieveMessageText completes successfully and the LocalFile property is not set.

This property is not available at design time.

Data Type

String

Overwrite Property (IPWorksEDI_IMAP Class)

This property indicates whether or not the class should overwrite files during transfer.

Object Oriented Interface

public function getOverwrite();
public function setOverwrite($value);

Procedural Interface

ipworksedi_imap_get($res, 66 );
ipworksedi_imap_set($res, 66, $value );

Default Value

false

Remarks

This property is a value indicating whether or not the class should overwrite files when downloading the message text or a message part and LocalFile is set. If Overwrite is False, an error will be thrown whenever LocalFile exists.

Data Type

Boolean

Password Property (IPWorksEDI_IMAP Class)

This property includes the password to be used to authenticate to the MailServer .

Object Oriented Interface

public function getPassword();
public function setPassword($value);

Procedural Interface

ipworksedi_imap_get($res, 67 );
ipworksedi_imap_set($res, 67, $value );

Default Value

''

Remarks

This property contains the password used to authenticate to the MailServer. Both the User and Password properties must be set before connecting to the MailServer.

Data Type

String

PeekMode Property (IPWorksEDI_IMAP Class)

When set to True, the message Seen flag is not changed during reading.

Object Oriented Interface

public function getPeekMode();
public function setPeekMode($value);

Procedural Interface

ipworksedi_imap_get($res, 68 );
ipworksedi_imap_set($res, 68, $value );

Default Value

false

Remarks

This property contains a True or False to determine whether or not this message should be seen. When this property is set to True, a PEEK option is added to all IMAP FETCH commands sent to the server. In this case, an RFC-compliant IMAP server should not set the Seen flag on the message.

This property is not available at design time.

Data Type

Boolean

RecentMessageCount Property (IPWorksEDI_IMAP Class)

This property includes the number of new messages in the Mailbox .

Object Oriented Interface

public function getRecentMessageCount();

Procedural Interface

ipworksedi_imap_get($res, 69 );

Default Value

0

Remarks

This property contains the number of new messages that are in the Mailbox. The class fills out MessageCount, RecentMessageCount, and MailboxFlags after connecting to the MailServer and selecting or examining a Mailbox.

This property is read-only.

Data Type

Integer

SortCriteria Property (IPWorksEDI_IMAP Class)

This property sorts criteria to use for message retrieval operations.

Object Oriented Interface

public function getSortCriteria();
public function setSortCriteria($value);

Procedural Interface

ipworksedi_imap_get($res, 70 );
ipworksedi_imap_set($res, 70, $value );

Default Value

''

Remarks

This property sorts criteria to use for message retrieval operations. When set, the class will send the SORT command to the server before any retrieval. If the server supports the SORT command, the results from the retrieve operation will be sorted according to SortCriteria. The format of the SortCriteria property consists of a parenthesized list of one or more sort keys.

Example. Setting SortCriteria:

IMAPControl.SortCriteria = "DATE" IMAPControl.SortCriteria = "SUBJECT FROM" IMAPControl.SortCriteria = "REVERSE SUBJECT"

Possible sort keys include the following:

Note: IMAP SORT functionality is relatively new and not all servers may implement it.

Data Type

String

SSLAcceptServerCertEffectiveDate Property (IPWorksEDI_IMAP Class)

The date on which this certificate becomes valid.

Object Oriented Interface

public function getSSLAcceptServerCertEffectiveDate();

Procedural Interface

ipworksedi_imap_get($res, 71 );

Default Value

''

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExpirationDate Property (IPWorksEDI_IMAP Class)

The date on which the certificate expires.

Object Oriented Interface

public function getSSLAcceptServerCertExpirationDate();

Procedural Interface

ipworksedi_imap_get($res, 72 );

Default Value

''

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExtendedKeyUsage Property (IPWorksEDI_IMAP Class)

A comma-delimited list of extended key usage identifiers.

Object Oriented Interface

public function getSSLAcceptServerCertExtendedKeyUsage();

Procedural Interface

ipworksedi_imap_get($res, 73 );

Default Value

''

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprint Property (IPWorksEDI_IMAP Class)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Object Oriented Interface

public function getSSLAcceptServerCertFingerprint();

Procedural Interface

ipworksedi_imap_get($res, 74 );

Default Value

''

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA1 Property (IPWorksEDI_IMAP Class)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Object Oriented Interface

public function getSSLAcceptServerCertFingerprintSHA1();

Procedural Interface

ipworksedi_imap_get($res, 75 );

Default Value

''

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA256 Property (IPWorksEDI_IMAP Class)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Object Oriented Interface

public function getSSLAcceptServerCertFingerprintSHA256();

Procedural Interface

ipworksedi_imap_get($res, 76 );

Default Value

''

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLAcceptServerCertIssuer Property (IPWorksEDI_IMAP Class)

The issuer of the certificate.

Object Oriented Interface

public function getSSLAcceptServerCertIssuer();

Procedural Interface

ipworksedi_imap_get($res, 77 );

Default Value

''

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKey Property (IPWorksEDI_IMAP Class)

The private key of the certificate (if available).

Object Oriented Interface

public function getSSLAcceptServerCertPrivateKey();

Procedural Interface

ipworksedi_imap_get($res, 78 );

Default Value

''

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLAcceptServerCertPrivateKey may be available but not exportable. In this case, SSLAcceptServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKeyAvailable Property (IPWorksEDI_IMAP Class)

Whether a PrivateKey is available for the selected certificate.

Object Oriented Interface

public function getSSLAcceptServerCertPrivateKeyAvailable();

Procedural Interface

ipworksedi_imap_get($res, 79 );

Default Value

false

Remarks

Whether a SSLAcceptServerCertPrivateKey is available for the selected certificate. If SSLAcceptServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLAcceptServerCertPrivateKeyContainer Property (IPWorksEDI_IMAP Class)

The name of the PrivateKey container for the certificate (if available).

Object Oriented Interface

public function getSSLAcceptServerCertPrivateKeyContainer();

Procedural Interface

ipworksedi_imap_get($res, 80 );

Default Value

''

Remarks

The name of the SSLAcceptServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKey Property (IPWorksEDI_IMAP Class)

The public key of the certificate.

Object Oriented Interface

public function getSSLAcceptServerCertPublicKey();

Procedural Interface

ipworksedi_imap_get($res, 81 );

Default Value

''

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyAlgorithm Property (IPWorksEDI_IMAP Class)

The textual description of the certificate's public key algorithm.

Object Oriented Interface

public function getSSLAcceptServerCertPublicKeyAlgorithm();

Procedural Interface

ipworksedi_imap_get($res, 82 );

Default Value

''

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyLength Property (IPWorksEDI_IMAP Class)

The length of the certificate's public key (in bits).

Object Oriented Interface

public function getSSLAcceptServerCertPublicKeyLength();

Procedural Interface

ipworksedi_imap_get($res, 83 );

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertSerialNumber Property (IPWorksEDI_IMAP Class)

The serial number of the certificate encoded as a string.

Object Oriented Interface

public function getSSLAcceptServerCertSerialNumber();

Procedural Interface

ipworksedi_imap_get($res, 84 );

Default Value

''

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLAcceptServerCertSignatureAlgorithm Property (IPWorksEDI_IMAP Class)

The text description of the certificate's signature algorithm.

Object Oriented Interface

public function getSSLAcceptServerCertSignatureAlgorithm();

Procedural Interface

ipworksedi_imap_get($res, 85 );

Default Value

''

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertStore Property (IPWorksEDI_IMAP Class)

The name of the certificate store for the client certificate.

Object Oriented Interface

public function getSSLAcceptServerCertStore();
public function setSSLAcceptServerCertStore($value);

Procedural Interface

ipworksedi_imap_get($res, 86 );
ipworksedi_imap_set($res, 86, $value );

Default Value

'MY'

Remarks

The name of the certificate store for the client certificate.

The SSLAcceptServerCertStoreType property denotes the type of the certificate store specified by SSLAcceptServerCertStore. If the store is password-protected, specify the password in SSLAcceptServerCertStorePassword.

SSLAcceptServerCertStore is used in conjunction with the SSLAcceptServerCertSubject property to specify client certificates. If SSLAcceptServerCertStore has a value, and SSLAcceptServerCertSubject or SSLAcceptServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLAcceptServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Binary String

SSLAcceptServerCertStorePassword Property (IPWorksEDI_IMAP Class)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Object Oriented Interface

public function getSSLAcceptServerCertStorePassword();
public function setSSLAcceptServerCertStorePassword($value);

Procedural Interface

ipworksedi_imap_get($res, 87 );
ipworksedi_imap_set($res, 87, $value );

Default Value

''

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLAcceptServerCertStoreType Property (IPWorksEDI_IMAP Class)

The type of certificate store for this certificate.

Object Oriented Interface

public function getSSLAcceptServerCertStoreType();
public function setSSLAcceptServerCertStoreType($value);

Procedural Interface

ipworksedi_imap_get($res, 88 );
ipworksedi_imap_set($res, 88, $value );

Default Value

0

Remarks

The type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLAcceptServerCertSubjectAltNames Property (IPWorksEDI_IMAP Class)

Comma-separated lists of alternative subject names for the certificate.

Object Oriented Interface

public function getSSLAcceptServerCertSubjectAltNames();

Procedural Interface

ipworksedi_imap_get($res, 89 );

Default Value

''

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintMD5 Property (IPWorksEDI_IMAP Class)

The MD5 hash of the certificate.

Object Oriented Interface

public function getSSLAcceptServerCertThumbprintMD5();

Procedural Interface

ipworksedi_imap_get($res, 90 );

Default Value

''

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA1 Property (IPWorksEDI_IMAP Class)

The SHA-1 hash of the certificate.

Object Oriented Interface

public function getSSLAcceptServerCertThumbprintSHA1();

Procedural Interface

ipworksedi_imap_get($res, 91 );

Default Value

''

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA256 Property (IPWorksEDI_IMAP Class)

The SHA-256 hash of the certificate.

Object Oriented Interface

public function getSSLAcceptServerCertThumbprintSHA256();

Procedural Interface

ipworksedi_imap_get($res, 92 );

Default Value

''

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsage Property (IPWorksEDI_IMAP Class)

The text description of UsageFlags .

Object Oriented Interface

public function getSSLAcceptServerCertUsage();

Procedural Interface

ipworksedi_imap_get($res, 93 );

Default Value

''

Remarks

The text description of SSLAcceptServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsageFlags Property (IPWorksEDI_IMAP Class)

The flags that show intended use for the certificate.

Object Oriented Interface

public function getSSLAcceptServerCertUsageFlags();

Procedural Interface

ipworksedi_imap_get($res, 94 );

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLAcceptServerCertUsageFlags is a combination of the following flags:

Please see the SSLAcceptServerCertUsage property for a text representation of SSLAcceptServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertVersion Property (IPWorksEDI_IMAP Class)

The certificate's version number.

Object Oriented Interface

public function getSSLAcceptServerCertVersion();

Procedural Interface

ipworksedi_imap_get($res, 95 );

Default Value

''

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLAcceptServerCertSubject Property (IPWorksEDI_IMAP Class)

The subject of the certificate used for client authentication.

Object Oriented Interface

public function getSSLAcceptServerCertSubject();
public function setSSLAcceptServerCertSubject($value);

Procedural Interface

ipworksedi_imap_get($res, 96 );
ipworksedi_imap_set($res, 96, $value );

Default Value

''

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLAcceptServerCertEncoded Property (IPWorksEDI_IMAP Class)

The certificate (PEM/Base64 encoded).

Object Oriented Interface

public function getSSLAcceptServerCertEncoded();
public function setSSLAcceptServerCertEncoded($value);

Procedural Interface

ipworksedi_imap_get($res, 97 );
ipworksedi_imap_set($res, 97, $value );

Default Value

''

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Binary String

SSLCertEffectiveDate Property (IPWorksEDI_IMAP Class)

The date on which this certificate becomes valid.

Object Oriented Interface

public function getSSLCertEffectiveDate();

Procedural Interface

ipworksedi_imap_get($res, 98 );

Default Value

''

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLCertExpirationDate Property (IPWorksEDI_IMAP Class)

The date on which the certificate expires.

Object Oriented Interface

public function getSSLCertExpirationDate();

Procedural Interface

ipworksedi_imap_get($res, 99 );

Default Value

''

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLCertExtendedKeyUsage Property (IPWorksEDI_IMAP Class)

A comma-delimited list of extended key usage identifiers.

Object Oriented Interface

public function getSSLCertExtendedKeyUsage();

Procedural Interface

ipworksedi_imap_get($res, 100 );

Default Value

''

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLCertFingerprint Property (IPWorksEDI_IMAP Class)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Object Oriented Interface

public function getSSLCertFingerprint();

Procedural Interface

ipworksedi_imap_get($res, 101 );

Default Value

''

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLCertFingerprintSHA1 Property (IPWorksEDI_IMAP Class)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Object Oriented Interface

public function getSSLCertFingerprintSHA1();

Procedural Interface

ipworksedi_imap_get($res, 102 );

Default Value

''

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLCertFingerprintSHA256 Property (IPWorksEDI_IMAP Class)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Object Oriented Interface

public function getSSLCertFingerprintSHA256();

Procedural Interface

ipworksedi_imap_get($res, 103 );

Default Value

''

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLCertIssuer Property (IPWorksEDI_IMAP Class)

The issuer of the certificate.

Object Oriented Interface

public function getSSLCertIssuer();

Procedural Interface

ipworksedi_imap_get($res, 104 );

Default Value

''

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLCertPrivateKey Property (IPWorksEDI_IMAP Class)

The private key of the certificate (if available).

Object Oriented Interface

public function getSSLCertPrivateKey();

Procedural Interface

ipworksedi_imap_get($res, 105 );

Default Value

''

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLCertPrivateKey may be available but not exportable. In this case, SSLCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLCertPrivateKeyAvailable Property (IPWorksEDI_IMAP Class)

Whether a PrivateKey is available for the selected certificate.

Object Oriented Interface

public function getSSLCertPrivateKeyAvailable();

Procedural Interface

ipworksedi_imap_get($res, 106 );

Default Value

false

Remarks

Whether a SSLCertPrivateKey is available for the selected certificate. If SSLCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLCertPrivateKeyContainer Property (IPWorksEDI_IMAP Class)

The name of the PrivateKey container for the certificate (if available).

Object Oriented Interface

public function getSSLCertPrivateKeyContainer();

Procedural Interface

ipworksedi_imap_get($res, 107 );

Default Value

''

Remarks

The name of the SSLCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLCertPublicKey Property (IPWorksEDI_IMAP Class)

The public key of the certificate.

Object Oriented Interface

public function getSSLCertPublicKey();

Procedural Interface

ipworksedi_imap_get($res, 108 );

Default Value

''

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLCertPublicKeyAlgorithm Property (IPWorksEDI_IMAP Class)

The textual description of the certificate's public key algorithm.

Object Oriented Interface

public function getSSLCertPublicKeyAlgorithm();

Procedural Interface

ipworksedi_imap_get($res, 109 );

Default Value

''

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertPublicKeyLength Property (IPWorksEDI_IMAP Class)

The length of the certificate's public key (in bits).

Object Oriented Interface

public function getSSLCertPublicKeyLength();

Procedural Interface

ipworksedi_imap_get($res, 110 );

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLCertSerialNumber Property (IPWorksEDI_IMAP Class)

The serial number of the certificate encoded as a string.

Object Oriented Interface

public function getSSLCertSerialNumber();

Procedural Interface

ipworksedi_imap_get($res, 111 );

Default Value

''

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLCertSignatureAlgorithm Property (IPWorksEDI_IMAP Class)

The text description of the certificate's signature algorithm.

Object Oriented Interface

public function getSSLCertSignatureAlgorithm();

Procedural Interface

ipworksedi_imap_get($res, 112 );

Default Value

''

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertStore Property (IPWorksEDI_IMAP Class)

The name of the certificate store for the client certificate.

Object Oriented Interface

public function getSSLCertStore();
public function setSSLCertStore($value);

Procedural Interface

ipworksedi_imap_get($res, 113 );
ipworksedi_imap_set($res, 113, $value );

Default Value

'MY'

Remarks

The name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password-protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Binary String

SSLCertStorePassword Property (IPWorksEDI_IMAP Class)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Object Oriented Interface

public function getSSLCertStorePassword();
public function setSSLCertStorePassword($value);

Procedural Interface

ipworksedi_imap_get($res, 114 );
ipworksedi_imap_set($res, 114, $value );

Default Value

''

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (IPWorksEDI_IMAP Class)

The type of certificate store for this certificate.

Object Oriented Interface

public function getSSLCertStoreType();
public function setSSLCertStoreType($value);

Procedural Interface

ipworksedi_imap_get($res, 115 );
ipworksedi_imap_set($res, 115, $value );

Default Value

0

Remarks

The type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubjectAltNames Property (IPWorksEDI_IMAP Class)

Comma-separated lists of alternative subject names for the certificate.

Object Oriented Interface

public function getSSLCertSubjectAltNames();

Procedural Interface

ipworksedi_imap_get($res, 116 );

Default Value

''

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLCertThumbprintMD5 Property (IPWorksEDI_IMAP Class)

The MD5 hash of the certificate.

Object Oriented Interface

public function getSSLCertThumbprintMD5();

Procedural Interface

ipworksedi_imap_get($res, 117 );

Default Value

''

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA1 Property (IPWorksEDI_IMAP Class)

The SHA-1 hash of the certificate.

Object Oriented Interface

public function getSSLCertThumbprintSHA1();

Procedural Interface

ipworksedi_imap_get($res, 118 );

Default Value

''

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA256 Property (IPWorksEDI_IMAP Class)

The SHA-256 hash of the certificate.

Object Oriented Interface

public function getSSLCertThumbprintSHA256();

Procedural Interface

ipworksedi_imap_get($res, 119 );

Default Value

''

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertUsage Property (IPWorksEDI_IMAP Class)

The text description of UsageFlags .

Object Oriented Interface

public function getSSLCertUsage();

Procedural Interface

ipworksedi_imap_get($res, 120 );

Default Value

''

Remarks

The text description of SSLCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLCertUsageFlags Property (IPWorksEDI_IMAP Class)

The flags that show intended use for the certificate.

Object Oriented Interface

public function getSSLCertUsageFlags();

Procedural Interface

ipworksedi_imap_get($res, 121 );

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLCertUsageFlags is a combination of the following flags:

Please see the SSLCertUsage property for a text representation of SSLCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLCertVersion Property (IPWorksEDI_IMAP Class)

The certificate's version number.

Object Oriented Interface

public function getSSLCertVersion();

Procedural Interface

ipworksedi_imap_get($res, 122 );

Default Value

''

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLCertSubject Property (IPWorksEDI_IMAP Class)

The subject of the certificate used for client authentication.

Object Oriented Interface

public function getSSLCertSubject();
public function setSSLCertSubject($value);

Procedural Interface

ipworksedi_imap_get($res, 123 );
ipworksedi_imap_set($res, 123, $value );

Default Value

''

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLCertEncoded Property (IPWorksEDI_IMAP Class)

The certificate (PEM/Base64 encoded).

Object Oriented Interface

public function getSSLCertEncoded();
public function setSSLCertEncoded($value);

Procedural Interface

ipworksedi_imap_get($res, 124 );
ipworksedi_imap_set($res, 124, $value );

Default Value

''

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Binary String

SSLEnabled Property (IPWorksEDI_IMAP Class)

This property indicates whether Transport Layer Security/Secure Sockets Layer (TLS/SSL) is enabled.

Object Oriented Interface

public function getSSLEnabled();
public function setSSLEnabled($value);

Procedural Interface

ipworksedi_imap_get($res, 125 );
ipworksedi_imap_set($res, 125, $value );

Default Value

false

Remarks

This property specifies whether TLS/SSL is enabled in the class. When False (default), the class operates in plaintext mode. When True, TLS/SSL is enabled.

TLS/SSL may also be enabled by setting SSLStartMode. Setting SSLStartMode will automatically update this property value.

This property is not available at design time.

Data Type

Boolean

SSLProvider Property (IPWorksEDI_IMAP Class)

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Object Oriented Interface

public function getSSLProvider();
public function setSSLProvider($value);

Procedural Interface

ipworksedi_imap_get($res, 126 );
ipworksedi_imap_set($res, 126, $value );

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected, on Windows, the class will use the platform implementation. On Linux/macOS, the class will use the internal implementation. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used on all platforms.

Data Type

Integer

SSLServerCertEffectiveDate Property (IPWorksEDI_IMAP Class)

The date on which this certificate becomes valid.

Object Oriented Interface

public function getSSLServerCertEffectiveDate();

Procedural Interface

ipworksedi_imap_get($res, 127 );

Default Value

''

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExpirationDate Property (IPWorksEDI_IMAP Class)

The date on which the certificate expires.

Object Oriented Interface

public function getSSLServerCertExpirationDate();

Procedural Interface

ipworksedi_imap_get($res, 128 );

Default Value

''

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExtendedKeyUsage Property (IPWorksEDI_IMAP Class)

A comma-delimited list of extended key usage identifiers.

Object Oriented Interface

public function getSSLServerCertExtendedKeyUsage();

Procedural Interface

ipworksedi_imap_get($res, 129 );

Default Value

''

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLServerCertFingerprint Property (IPWorksEDI_IMAP Class)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Object Oriented Interface

public function getSSLServerCertFingerprint();

Procedural Interface

ipworksedi_imap_get($res, 130 );

Default Value

''

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA1 Property (IPWorksEDI_IMAP Class)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Object Oriented Interface

public function getSSLServerCertFingerprintSHA1();

Procedural Interface

ipworksedi_imap_get($res, 131 );

Default Value

''

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA256 Property (IPWorksEDI_IMAP Class)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Object Oriented Interface

public function getSSLServerCertFingerprintSHA256();

Procedural Interface

ipworksedi_imap_get($res, 132 );

Default Value

''

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLServerCertIssuer Property (IPWorksEDI_IMAP Class)

The issuer of the certificate.

Object Oriented Interface

public function getSSLServerCertIssuer();

Procedural Interface

ipworksedi_imap_get($res, 133 );

Default Value

''

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLServerCertPrivateKey Property (IPWorksEDI_IMAP Class)

The private key of the certificate (if available).

Object Oriented Interface

public function getSSLServerCertPrivateKey();

Procedural Interface

ipworksedi_imap_get($res, 134 );

Default Value

''

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLServerCertPrivateKey may be available but not exportable. In this case, SSLServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLServerCertPrivateKeyAvailable Property (IPWorksEDI_IMAP Class)

Whether a PrivateKey is available for the selected certificate.

Object Oriented Interface

public function getSSLServerCertPrivateKeyAvailable();

Procedural Interface

ipworksedi_imap_get($res, 135 );

Default Value

false

Remarks

Whether a SSLServerCertPrivateKey is available for the selected certificate. If SSLServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLServerCertPrivateKeyContainer Property (IPWorksEDI_IMAP Class)

The name of the PrivateKey container for the certificate (if available).

Object Oriented Interface

public function getSSLServerCertPrivateKeyContainer();

Procedural Interface

ipworksedi_imap_get($res, 136 );

Default Value

''

Remarks

The name of the SSLServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLServerCertPublicKey Property (IPWorksEDI_IMAP Class)

The public key of the certificate.

Object Oriented Interface

public function getSSLServerCertPublicKey();

Procedural Interface

ipworksedi_imap_get($res, 137 );

Default Value

''

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyAlgorithm Property (IPWorksEDI_IMAP Class)

The textual description of the certificate's public key algorithm.

Object Oriented Interface

public function getSSLServerCertPublicKeyAlgorithm();

Procedural Interface

ipworksedi_imap_get($res, 138 );

Default Value

''

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyLength Property (IPWorksEDI_IMAP Class)

The length of the certificate's public key (in bits).

Object Oriented Interface

public function getSSLServerCertPublicKeyLength();

Procedural Interface

ipworksedi_imap_get($res, 139 );

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLServerCertSerialNumber Property (IPWorksEDI_IMAP Class)

The serial number of the certificate encoded as a string.

Object Oriented Interface

public function getSSLServerCertSerialNumber();

Procedural Interface

ipworksedi_imap_get($res, 140 );

Default Value

''

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLServerCertSignatureAlgorithm Property (IPWorksEDI_IMAP Class)

The text description of the certificate's signature algorithm.

Object Oriented Interface

public function getSSLServerCertSignatureAlgorithm();

Procedural Interface

ipworksedi_imap_get($res, 141 );

Default Value

''

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertStore Property (IPWorksEDI_IMAP Class)

The name of the certificate store for the client certificate.

Object Oriented Interface

public function getSSLServerCertStore();

Procedural Interface

ipworksedi_imap_get($res, 142 );

Default Value

'MY'

Remarks

The name of the certificate store for the client certificate.

The SSLServerCertStoreType property denotes the type of the certificate store specified by SSLServerCertStore. If the store is password-protected, specify the password in SSLServerCertStorePassword.

SSLServerCertStore is used in conjunction with the SSLServerCertSubject property to specify client certificates. If SSLServerCertStore has a value, and SSLServerCertSubject or SSLServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

This property is read-only.

Data Type

Binary String

SSLServerCertStorePassword Property (IPWorksEDI_IMAP Class)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Object Oriented Interface

public function getSSLServerCertStorePassword();

Procedural Interface

ipworksedi_imap_get($res, 143 );

Default Value

''

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

This property is read-only.

Data Type

String

SSLServerCertStoreType Property (IPWorksEDI_IMAP Class)

The type of certificate store for this certificate.

Object Oriented Interface

public function getSSLServerCertStoreType();

Procedural Interface

ipworksedi_imap_get($res, 144 );

Default Value

0

Remarks

The type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:

This property is read-only.

Data Type

Integer

SSLServerCertSubjectAltNames Property (IPWorksEDI_IMAP Class)

Comma-separated lists of alternative subject names for the certificate.

Object Oriented Interface

public function getSSLServerCertSubjectAltNames();

Procedural Interface

ipworksedi_imap_get($res, 145 );

Default Value

''

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLServerCertThumbprintMD5 Property (IPWorksEDI_IMAP Class)

The MD5 hash of the certificate.

Object Oriented Interface

public function getSSLServerCertThumbprintMD5();

Procedural Interface

ipworksedi_imap_get($res, 146 );

Default Value

''

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA1 Property (IPWorksEDI_IMAP Class)

The SHA-1 hash of the certificate.

Object Oriented Interface

public function getSSLServerCertThumbprintSHA1();

Procedural Interface

ipworksedi_imap_get($res, 147 );

Default Value

''

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA256 Property (IPWorksEDI_IMAP Class)

The SHA-256 hash of the certificate.

Object Oriented Interface

public function getSSLServerCertThumbprintSHA256();

Procedural Interface

ipworksedi_imap_get($res, 148 );

Default Value

''

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertUsage Property (IPWorksEDI_IMAP Class)

The text description of UsageFlags .

Object Oriented Interface

public function getSSLServerCertUsage();

Procedural Interface

ipworksedi_imap_get($res, 149 );

Default Value

''

Remarks

The text description of SSLServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLServerCertUsageFlags Property (IPWorksEDI_IMAP Class)

The flags that show intended use for the certificate.

Object Oriented Interface

public function getSSLServerCertUsageFlags();

Procedural Interface

ipworksedi_imap_get($res, 150 );

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLServerCertUsageFlags is a combination of the following flags:

Please see the SSLServerCertUsage property for a text representation of SSLServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLServerCertVersion Property (IPWorksEDI_IMAP Class)

The certificate's version number.

Object Oriented Interface

public function getSSLServerCertVersion();

Procedural Interface

ipworksedi_imap_get($res, 151 );

Default Value

''

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLServerCertSubject Property (IPWorksEDI_IMAP Class)

The subject of the certificate used for client authentication.

Object Oriented Interface

public function getSSLServerCertSubject();

Procedural Interface

ipworksedi_imap_get($res, 152 );

Default Value

''

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

This property is read-only.

Data Type

String

SSLServerCertEncoded Property (IPWorksEDI_IMAP Class)

The certificate (PEM/Base64 encoded).

Object Oriented Interface

public function getSSLServerCertEncoded();

Procedural Interface

ipworksedi_imap_get($res, 153 );

Default Value

''

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

This property is read-only and not available at design time.

Data Type

Binary String

SSLStartMode Property (IPWorksEDI_IMAP Class)

This property determines how the class starts the Secure Sockets Layer (SSL) negotiation.

Object Oriented Interface

public function getSSLStartMode();
public function setSSLStartMode($value);

Procedural Interface

ipworksedi_imap_get($res, 154 );
ipworksedi_imap_set($res, 154, $value );

Default Value

3

Remarks

The SSLStartMode property may have one of the following values:

Data Type

Integer

StartByte Property (IPWorksEDI_IMAP Class)

This property includes the byte index of the position where the transfer should start.

Object Oriented Interface

public function getStartByte();
public function setStartByte($value);

Procedural Interface

ipworksedi_imap_get($res, 155 );
ipworksedi_imap_set($res, 155, $value );

Default Value

0

Remarks

StartByte and EndByte are used together with the RetrieveMessagePart method to specify the portion of the message to be retrieved from the server.

When StartByte or EndByte contain values other than the default (0), only the corresponding portion of the message is retrieved from the server.

Byte indexes start from 1. The default value for EndByte is 0, which corresponds to the end of the message.

This property is not available at design time.

Data Type

Long64

Timeout Property (IPWorksEDI_IMAP Class)

The timeout for the class.

Object Oriented Interface

public function getTimeout();
public function setTimeout($value);

Procedural Interface

ipworksedi_imap_get($res, 156 );
ipworksedi_imap_set($res, 156, $value );

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the class will wait for the operation to complete before returning control.

The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the class fails with an error.

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

UIDMode Property (IPWorksEDI_IMAP Class)

If True, this property indicates whether permanent message identifiers are used instead of the default temporary identifiers.

Object Oriented Interface

public function getUIDMode();
public function setUIDMode($value);

Procedural Interface

ipworksedi_imap_get($res, 157 );
ipworksedi_imap_set($res, 157, $value );

Default Value

false

Remarks

This property indicates if a permanent identifier should be used. Normally, the IMAP server uses temporary message identifiers that are valid only during the current session. If UIDMode is True, permanent message identifiers are used instead.

The following IMAP protocol operations use the UID mode: COPY, FETCH, STORE, and SEARCH.

This property is not available at design time.

Data Type

Boolean

UIDValidity Property (IPWorksEDI_IMAP Class)

This property includes the UIDValidity parameter sent from the server in response to SelectMailbox command.

Object Oriented Interface

public function getUIDValidity();

Procedural Interface

ipworksedi_imap_get($res, 158 );

Default Value

''

Remarks

Every time a mailbox is selected, a UIDValidity is returned from the server. Most of the time, this value will not change from call to call. If it does change, this means that all previously returned UIDs for messages inside this mailbox are now invalid.

This property is read-only and not available at design time.

Data Type

String

User Property (IPWorksEDI_IMAP Class)

This property includes the username used to authenticate to the MailServer .

Object Oriented Interface

public function getUser();
public function setUser($value);

Procedural Interface

ipworksedi_imap_get($res, 159 );
ipworksedi_imap_set($res, 159, $value );

Default Value

''

Remarks

This property contains the username used to authenticate to the MailServer. Both the User and Password properties must be set before connecting to the MailServer.

Data Type

String

AddMessageFlags Method (IPWorksEDI_IMAP Class)

This method adds the specified flags to the messages specified by MessageSet .

Object Oriented Interface

public function doAddMessageFlags($flags);

Procedural Interface

ipworksedi_imap_do_addmessageflags($res, $flags);

Remarks

This method adds the specified flags to the messages specified by the MessageSet property. The format of the flags is specified by the IMAP RFCs.

Examples of possible flag values are server dependent, but they can include the following:

IMAPControl.MessageSet = "1" IMAPControl.AddMessageFlags("\Deleted")

AppendToMailbox Method (IPWorksEDI_IMAP Class)

This method appends the message in MessageText to the mailbox specified by Mailbox .

Object Oriented Interface

public function doAppendToMailbox();

Procedural Interface

ipworksedi_imap_do_appendtomailbox($res);

Remarks

This method appends the RFC 822-encoded message in MessageText to the mailbox specified by Mailbox. If the MessageFlags property is not an empty string, its contents are supplied with the APPEND command sent to the server.

Example. Append Message to Mailbox:

IMAPControl.MessageText = MessageHeaders + CRLF + CRLF + MessageBody + CRLF IMAPControl.Mailbox = "INBOX" IMAPControl.MessageFlags = "\Deleted" IMAPControl.AppendToMailbox()

CheckMailbox Method (IPWorksEDI_IMAP Class)

This method sends a CHECK command to the server.

Object Oriented Interface

public function doCheckMailbox();

Procedural Interface

ipworksedi_imap_do_checkmailbox($res);

Remarks

This method sends a CHECK command to the server, asking it to perform any necessary housekeeping operations on and to update the state of the currently selected mailbox.

CloseMailbox Method (IPWorksEDI_IMAP Class)

This method removes all messages marked with a 'Deleted' flag from the currently selected mailbox and closes the unselected mailbox.

Object Oriented Interface

public function doCloseMailbox();

Procedural Interface

ipworksedi_imap_do_closemailbox($res);

Remarks

This method permanently removes all messages that have a 'Deleted' flag that have been set from the current (selected) mailbox. It then closes (deselected) the mailbox.

Config Method (IPWorksEDI_IMAP Class)

Sets or retrieves a configuration setting.

Object Oriented Interface

public function doConfig($configurationstring);

Procedural Interface

ipworksedi_imap_do_config($res, $configurationstring);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (IPWorksEDI_IMAP Class)

This method connects to an IMAP server.

Object Oriented Interface

public function doConnect();

Procedural Interface

ipworksedi_imap_do_connect($res);

Remarks

This method connects to the IMAP server specified by MailServer and authenticates it using the username and password supplied in the User and Password properties.

Example. Connect IMAP Server:

IMAPControl.MailServer = "myserver" IMAPControl.Mailbox = "INBOX" IMAPControl.User = "myusername" IMAPControl.Password = "mypassword" IMAPControl.Connect() IMAPControl.MailServer = "myserver" IMAPControl.Mailbox = "DOMAIN/USERNT/INBOX" IMAPControl.User = "myusername" IMAPControl.Password = "mypassword" IMAPControl.Connect()

CopyToMailbox Method (IPWorksEDI_IMAP Class)

Copies the specified messages to another mailbox.

Object Oriented Interface

public function doCopyToMailbox();

Procedural Interface

ipworksedi_imap_do_copytomailbox($res);

Remarks

This method copies the messages specified by the MessageSet property to the mailbox specified by the Mailbox property.

CreateMailbox Method (IPWorksEDI_IMAP Class)

This method creates a new mailbox specified by Mailbox .

Object Oriented Interface

public function doCreateMailbox();

Procedural Interface

ipworksedi_imap_do_createmailbox($res);

Remarks

This method creates a new mailbox. The mailbox name is specified by the Mailbox property.

DeleteFromMailbox Method (IPWorksEDI_IMAP Class)

The method marks the messages specified by MessageSet as deleted.

Object Oriented Interface

public function doDeleteFromMailbox();

Procedural Interface

ipworksedi_imap_do_deletefrommailbox($res);

Remarks

This method marks the messages specified by MessageSet as deleted. Calling this method is equivalent to calling AddMessageFlags with "\Deleted" as the Flags parameter.

DeleteMailbox Method (IPWorksEDI_IMAP Class)

This method deletes a mailbox specified by Mailbox .

Object Oriented Interface

public function doDeleteMailbox();

Procedural Interface

ipworksedi_imap_do_deletemailbox($res);

Remarks

This method deletes a mailbox. The mailbox name is specified by the Mailbox property.

DeleteMailboxACL Method (IPWorksEDI_IMAP Class)

This method deletes mailbox access control rights for a specific user.

Object Oriented Interface

public function doDeleteMailboxACL($user);

Procedural Interface

ipworksedi_imap_do_deletemailboxacl($res, $user);

Remarks

This message asks the server to remove all rights associated with User from the mailbox specified in the Mailbox property. Refer to SetMailboxACL and GetMailboxACL for more information on mailbox access rights.

Disconnect Method (IPWorksEDI_IMAP Class)

This method disconnects from an IMAP server.

Object Oriented Interface

public function doDisconnect();

Procedural Interface

ipworksedi_imap_do_disconnect($res);

Remarks

This method logs out and disconnects from the IMAP server.

DoEvents Method (IPWorksEDI_IMAP Class)

This method processes events from the internal message queue.

Object Oriented Interface

public function doEvents();

Procedural Interface

ipworksedi_imap_do_doevents($res);

Remarks

When DoEvents is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.

ExamineMailbox Method (IPWorksEDI_IMAP Class)

This method selects a mailbox in read-only mode.

Object Oriented Interface

public function doExamineMailbox();

Procedural Interface

ipworksedi_imap_do_examinemailbox($res);

Remarks

This method asks the server to select the mailbox specified in the Mailbox property in read-only mode.

Example 1. Open a Mailbox in Read/Write Mode:

IMAPControl.Mailbox = "INBOX" IMAPControl.SelectMailbox

Example 2. Open a Mailbox in Read-Only Mode:

IMAPControl.Mailbox = "INBOX.Folder" IMAPControl.ExamineMailbox

ExpungeMailbox Method (IPWorksEDI_IMAP Class)

This method removes all messages marked with a 'Deleted' flag from the currently selected mailbox.

Object Oriented Interface

public function doExpungeMailbox();

Procedural Interface

ipworksedi_imap_do_expungemailbox($res);

Remarks

This method permanently removes all messages that have a 'Deleted' flag from the current (selected) mailbox. Example. Set "Deleted" Flag and Expunge:

IMAPControl.MessageSet = "1" IMAPControl.AddMessageFlags("\Deleted") IMAPControl.ExpungeMailbox()

GetMailboxACL Method (IPWorksEDI_IMAP Class)

This method retrieves mailbox access control rights.

Object Oriented Interface

public function doGetMailboxACL();

Procedural Interface

ipworksedi_imap_do_getmailboxacl($res);

Remarks

This method retrieves the mailbox access control rights, which are provided through one or more MailboxACL events. Standard rights include the following:

Interrupt Method (IPWorksEDI_IMAP Class)

This method interrupts the current method.

Object Oriented Interface

public function doInterrupt();

Procedural Interface

ipworksedi_imap_do_interrupt($res);

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ListMailboxes Method (IPWorksEDI_IMAP Class)

This method lists all of the mailboxes matching all criteria in the Mailbox property.

Object Oriented Interface

public function doListMailboxes();

Procedural Interface

ipworksedi_imap_do_listmailboxes($res);

Remarks

This method lists all of the mailboxes matching the criteria in the Mailbox property. Matching mailboxes are returned through the MailboxList event.

Example 1. List All Mailboxes:

IMAPControl.Mailbox = "*" IMAPControl.ListMailboxes()

Example 2. List All Mailboxes Inside INBOX:

IMAPControl.Mailbox = "INBOX.*" IMAPControl.ListMailboxes()

ListSubscribedMailboxes Method (IPWorksEDI_IMAP Class)

This method lists all subscribed mailboxes matching all criteria in the Mailbox property.

Object Oriented Interface

public function doListSubscribedMailboxes();

Procedural Interface

ipworksedi_imap_do_listsubscribedmailboxes($res);

Remarks

This method lists all subscribed mailboxes matching the criteria in the Mailbox property. Matching mailboxes are returned through MailboxList event.

Example 1. List All Subscribed Mailboxes:

IMAPControl.Mailbox = "*" IMAPControl.ListSubscribedMailboxes()

Example 2. List All Subscribed Mailboxes Inside INBOX:

IMAPControl.Mailbox = "INBOX.*" IMAPControl.ListSubscribedMailboxes()

LocalizeDate Method (IPWorksEDI_IMAP Class)

This method converts a valid RFC 822 message date to a local date and time.

Object Oriented Interface

public function doLocalizeDate($datetime);

Procedural Interface

ipworksedi_imap_do_localizedate($res, $datetime);

Remarks

This method can be used to convert an RFC 822 date and time string to the corresponding local date and time.

Note: Dates will be returned in the format: "MM/dd/yyyy hh:mm:ss".

MoveToMailbox Method (IPWorksEDI_IMAP Class)

Copies the specified messages to another mailbox and marks the original messages as deleted.

Object Oriented Interface

public function doMoveToMailbox();

Procedural Interface

ipworksedi_imap_do_movetomailbox($res);

Remarks

This method copies the messages specified by the MessageSet property to the mailbox specified by the Mailbox property. Additionally, the messages in the original mailbox are marked as deleted.

Calling this method is equivalent to calling the CopyToMailbox method immediately followed by the DeleteFromMailbox method.

Noop Method (IPWorksEDI_IMAP Class)

This method sends a NOOP command to the server.

Object Oriented Interface

public function doNoop();

Procedural Interface

ipworksedi_imap_do_noop($res);

Remarks

This method sends an IMAP NOOP command to the server. This is useful when the connection needs to be kept alive for long periods of time. (Normally, servers break the connection automatically after 30 minutes of inactivity.)

RenameMailbox Method (IPWorksEDI_IMAP Class)

This method changes the name of Mailbox to NewName .

Object Oriented Interface

public function doRenameMailbox($newname);

Procedural Interface

ipworksedi_imap_do_renamemailbox($res, $newname);

Remarks

This method allows a mailbox to be renamed. The mailbox is specified by the Mailbox property, and the new name is specified by the NewName parameter.

Reset Method (IPWorksEDI_IMAP Class)

This method will reset the class.

Object Oriented Interface

public function doReset();

Procedural Interface

ipworksedi_imap_do_reset($res);

Remarks

This method will reset the class's properties to their default values.

ResetMessageFlags Method (IPWorksEDI_IMAP Class)

This method replaces the flags of the messages specified by MessageSet with the flags specified by MessageFlags .

Object Oriented Interface

public function doResetMessageFlags();

Procedural Interface

ipworksedi_imap_do_resetmessageflags($res);

Remarks

This method replaces the flags of the messages specified by the MessageSet property with the flags specified by the MessageFlags property. The format of the flags is specified by the IMAP RFCs.

Examples of possible flag values are server dependent, but they can include the following:

RetrieveMessageHeaders Method (IPWorksEDI_IMAP Class)

This method retrieves the message headers of the messages specified by the MessageSet property.

Object Oriented Interface

public function doRetrieveMessageHeaders();

Procedural Interface

ipworksedi_imap_do_retrievemessageheaders($res);

Remarks

This method retrieves RFC 822 headers of the messages specified by MessageSet and stores them in the MessageHeaders property.

RetrieveMessageInfo Method (IPWorksEDI_IMAP Class)

This method retrieves information about messages specified by the MessageSet property.

Object Oriented Interface

public function doRetrieveMessageInfo();

Procedural Interface

ipworksedi_imap_do_retrievemessageinfo($res);

Remarks

This method retrieves information for the messages specified by the MessageSet property. This includes information about the message envelope as well as message structure. Every time a message envelope is retrieved, a MessageInfo event is fired, and message envelope information is stored in properties, such as the following: MessageSubject, MessageFrom, and MessageRecipients. If the message is a multipart message, one or more MessagePart events will be fired before the MessageInfo event (one for each message part).

RetrieveMessagePart Method (IPWorksEDI_IMAP Class)

This method retrieves the message part specified by PartID.

Object Oriented Interface

public function doRetrieveMessagePart($partid);

Procedural Interface

ipworksedi_imap_do_retrievemessagepart($res, $partid);

Remarks

This method retrieves the contents of the message part specified by the PartId property of the messages specified by the MessageSet property. If the LocalFile property contains a file name, the message part is stored in LocalFile. If the LocalFile property is set to an empty string, then the message part is stored in the MessageText property. Additionally, the Transfer will also provide the message part and denote the progress of the retrieval.

The part identifiers for each message part (if any) are provided through the corresponding MessagePart events. This method retrieves the RFC 822-encoded text of the messages specified by MessageSet.

RetrieveMessagePartHeaders Method (IPWorksEDI_IMAP Class)

This method retrieves the headers of message part specified by PartID.

Object Oriented Interface

public function doRetrieveMessagePartHeaders($partid);

Procedural Interface

ipworksedi_imap_do_retrievemessagepartheaders($res, $partid);

Remarks

This method retrieves RFC 822 headers of the message part specified by PartID and stores them in the MessageHeaders property.

RetrieveMessageText Method (IPWorksEDI_IMAP Class)

This method retrieves the message text of the messages specified by the MessageSet property.

Object Oriented Interface

public function doRetrieveMessageText();

Procedural Interface

ipworksedi_imap_do_retrievemessagetext($res);

Remarks

This method retrieves the RFC 822-encoded text of the messages specified by MessageSet. If the LocalFile property contains a file name, the text is stored in LocalFile. If the LocalFile property is set to an empty string, then the text is stored in the MessageText property. Additionally, the Transfer event will also provide the text and denote the progress of the retrieval.

SearchMailbox Method (IPWorksEDI_IMAP Class)

This method searches the selected mailbox for specified text.

Object Oriented Interface

public function doSearchMailbox($searchcriteria);

Procedural Interface

ipworksedi_imap_do_searchmailbox($res, $searchcriteria);

Remarks

This method searches the selected mailbox using the criteria specified in the SearchCriteria parameter. For every message matching the criteria, the RetrieveMessageInfo method is called and a MessageInfo event is fired.

The exact format of the search criteria is specified by the IMAP RFCs. The string consists of one or more search keys and their corresponding values (if any) separated by spaces, for example: "SINCE 1-Feb-1994 NOT FROM Smith".

Possible search keys include the following:

SelectMailbox Method (IPWorksEDI_IMAP Class)

This method selects a mailbox.

Object Oriented Interface

public function doSelectMailbox();

Procedural Interface

ipworksedi_imap_do_selectmailbox($res);

Remarks

This method asks the server to select the mailbox specified in the Mailbox property. The mailbox is selected in read/write mode (if the server permits).

Example 1. Open a Mailbox in Read/Write Mode:

IMAPControl.Mailbox = "INBOX" IMAPControl.SelectMailbox

Example 2. Open a Mailbox in Read-Only Mode:

IMAPControl.Mailbox = "INBOX.Folder" IMAPControl.ExamineMailbox

SendCommand Method (IPWorksEDI_IMAP Class)

This method sends the exact command directly to the server.

Object Oriented Interface

public function doSendCommand($command);

Procedural Interface

ipworksedi_imap_do_sendcommand($res, $command);

Remarks

This method sends the command specified by Command to the server exactly as it is provided. Use this method to send additional or custom commands directly to the server.

After calling this method, check the LastReply property or monitor the PITrail event to obtain the server's response.

SetMailboxACL Method (IPWorksEDI_IMAP Class)

This method sets mailbox access control rights for a specific user.

Object Oriented Interface

public function doSetMailboxACL($user, $rights);

Procedural Interface

ipworksedi_imap_do_setmailboxacl($res, $user, $rights);

Remarks

This method changes the access control list for the mailbox specified in the Mailbox property so that User is granted the permissions specified in Rights.

Rights is a string containing an optional plus ("+") or minus ("-") prefix, followed by zero or more rights characters. If the string starts with a plus, the rights are added to any existing rights for the identifier. If the string starts with a minus, the rights are removed from any existing rights for the identifier. If the string does not start with a plus or minus, the rights replace any existing rights for the identifier.

Standard rights include the following:

StartIdle Method (IPWorksEDI_IMAP Class)

This method begins idling.

Object Oriented Interface

public function doStartIdle();

Procedural Interface

ipworksedi_imap_do_startidle($res);

Remarks

This method sends the IDLE command to the server and begins idling. As responses are received from the server the IdleInfo event fires. To stop idling, call StopIdle.

If the class is being used in a formless application (such as a console application) be sure to call DoEvents in a loop after calling this method to ensure that incoming events are processed.

StopIdle Method (IPWorksEDI_IMAP Class)

This method stops idling.

Object Oriented Interface

public function doStopIdle();

Procedural Interface

ipworksedi_imap_do_stopidle($res);

Remarks

This method stops idling if it was previously started via StartIdle. If the class is not idling, this method does nothing.

SubscribeMailbox Method (IPWorksEDI_IMAP Class)

This method subscribes to the mailbox specified by Mailbox .

Object Oriented Interface

public function doSubscribeMailbox();

Procedural Interface

ipworksedi_imap_do_subscribemailbox($res);

Remarks

This method subscribes to the mailbox specified by the Mailbox property.

UnsetMessageFlags Method (IPWorksEDI_IMAP Class)

This method removes the flags specified by MessageFlags from the messages specified by MessageSet .

Object Oriented Interface

public function doUnsetMessageFlags();

Procedural Interface

ipworksedi_imap_do_unsetmessageflags($res);

Remarks

This method removes the flags specified by the MessageFlags property from the messages specified by the MessageSet property. The format of the flags is specified by the IMAP RFCs.

Examples of possible flag values are server dependent, but they can include the following:

UnsubscribeMailbox Method (IPWorksEDI_IMAP Class)

This method unsubscribes from the mailbox specified by Mailbox .

Object Oriented Interface

public function doUnsubscribeMailbox();

Procedural Interface

ipworksedi_imap_do_unsubscribemailbox($res);

Remarks

This method unsubscribes from the mailbox specified by the Mailbox property.

ConnectionStatus Event (IPWorksEDI_IMAP Class)

Fired to indicate changes in the connection state.

Object Oriented Interface

public function fireConnectionStatus($param);

Procedural Interface

ipworksedi_imap_register_callback($res, 1, array($this, 'fireConnectionStatus'));

Parameter List

 'connectionevent'
 'statuscode'
 'description'

Remarks

This event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

EndTransfer Event (IPWorksEDI_IMAP Class)

This event is fired when the message or the part data finishes transferring.

Object Oriented Interface

public function fireEndTransfer($param);

Procedural Interface

ipworksedi_imap_register_callback($res, 2, array($this, 'fireEndTransfer'));

Parameter List

 'direction'

Remarks

The EndTransfer event is fired when the requested message body or part completes transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Error Event (IPWorksEDI_IMAP Class)

Fired when information is available about errors during data delivery.

Object Oriented Interface

public function fireError($param);

Procedural Interface

ipworksedi_imap_register_callback($res, 3, array($this, 'fireError'));

Parameter List

 'errorcode'
 'description'

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class fails with an error.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Header Event (IPWorksEDI_IMAP Class)

This event is fired every time a header line comes in.

Object Oriented Interface

public function fireHeader($param);

Procedural Interface

ipworksedi_imap_register_callback($res, 4, array($this, 'fireHeader'));

Parameter List

 'field'
 'value'

Remarks

The Field parameter contains the name of the HTTP header (in the same case as it is delivered). The Value parameter contains the header contents.

If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).

IdleInfo Event (IPWorksEDI_IMAP Class)

This event fires whenever responses from the server are received while idling.

Object Oriented Interface

public function fireIdleInfo($param);

Procedural Interface

ipworksedi_imap_register_callback($res, 5, array($this, 'fireIdleInfo'));

Parameter List

 'message'
 'cancel'

Remarks

This event fires each time a response is received from the server after calling StartIdle. This will fire with information from the server intended to update the client. The type of data sent by the server may vary.

Message holds the response received from the server.

Cancel may be set to stop idling from within the event. This is equivalent to calling StopIdle.

The following are possible values returned by the server:

+ idling
* 43 EXISTS
* 1 RECENT

MailboxACL Event (IPWorksEDI_IMAP Class)

This event fires for each set of access control rights returned by the server.

Object Oriented Interface

public function fireMailboxACL($param);

Procedural Interface

ipworksedi_imap_register_callback($res, 6, array($this, 'fireMailboxACL'));

Parameter List

 'mailbox'
 'user'
 'rights'

Remarks

The event fires for each set of access control rights returned by the server after a call to GetMailboxACL. Standard rights include the following:

MailboxList Event (IPWorksEDI_IMAP Class)

This event fires for each mailbox received through the ListMailboxes and ListSubscribedMailboxes methods.

Object Oriented Interface

public function fireMailboxList($param);

Procedural Interface

ipworksedi_imap_register_callback($res, 7, array($this, 'fireMailboxList'));

Parameter List

 'mailbox'
 'separator'
 'flags'

Remarks

This method is fired for each mailbox received through the ListMailboxes and ListSubscribedMailboxes methods. The Separator parameter contains the character that separates the different parts in the mailbox path hierarchy.

MessageInfo Event (IPWorksEDI_IMAP Class)

This event is fired with information for the messages retrieved by the server.

Object Oriented Interface

public function fireMessageInfo($param);

Procedural Interface

ipworksedi_imap_register_callback($res, 8, array($this, 'fireMessageInfo'));

Parameter List

 'messageid'
 'subject'
 'messagedate'
 'from'
 'flags'
 'size'

Remarks

The MessageInfo event is fired when messages are searched, listed, or message information is received.

Id is the Id of the message.

Subject is the message subject.

MessageDate is the date of the message.

From is the email address of the sender.

Flags is a list of flags associated with this message.

Size is the size of the message.

More information may be received from the respective properties, such as the following: MessageContentType, MessageContentEncoding, MessageRecipients, MessageDeliveryTime, MessageFlags, MessageHeaders, MessageInReplyTo, MessageNetId, MessageReplyTo, MessageSender, MessageSize, MessageSubject, MessageText, etc.

MessagePart Event (IPWorksEDI_IMAP Class)

This event is fired for each message part when RetrieveMessageInfo is called.

Object Oriented Interface

public function fireMessagePart($param);

Procedural Interface

ipworksedi_imap_register_callback($res, 9, array($this, 'fireMessagePart'));

Parameter List

 'partid'
 'size'
 'contenttype'
 'filename'
 'contentencoding'
 'parameters'
 'multipartmode'
 'contentid'
 'contentdisposition'

Remarks

The PartId parameter denotes the PartId that may be identified in other parts or messages. The format of PartIds is specified by the IMAP RFCs.

The Size parameter gives the size of this part.

The ContentType parameter shows the type of data contained in the part.

The ContentEncoding parameter shows how data are encoded.

The FileName parameter shows the filename corresponding to the part (if the part was included in the message as an attached file).

The Parameters parameter contains the additional parameters passed to the ContentType header, such as the part charset.

The MultipartMode parameter shows the how this part relates to the message's whole multipart structure (e.g., 'mixed', 'alternative', etc.).

The ContentId parameter shows the value of the Content-Id header for the part.

The ContentDisposition parameter shows the value of the Content-Disposition header for the part.

PITrail Event (IPWorksEDI_IMAP Class)

This event traces the commands sent to the mail server, and the respective replies.

Object Oriented Interface

public function firePITrail($param);

Procedural Interface

ipworksedi_imap_register_callback($res, 10, array($this, 'firePITrail'));

Parameter List

 'direction'
 'message'

Remarks

The PITrail event is useful for debugging and learning purposes. It shows all of the interactions between the client and the server, line by line, except for message header and body transfers.

The Message parameter contains the full text of the message. The Direction parameter shows the originator of the message:

SSLServerAuthentication Event (IPWorksEDI_IMAP Class)

Fired after the server presents its certificate to the client.

Object Oriented Interface

public function fireSSLServerAuthentication($param);

Procedural Interface

ipworksedi_imap_register_callback($res, 11, array($this, 'fireSSLServerAuthentication'));

Parameter List

 'certencoded'
 'certsubject'
 'certissuer'
 'status'
 'accept'

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (IPWorksEDI_IMAP Class)

Fired when secure connection progress messages are available.

Object Oriented Interface

public function fireSSLStatus($param);

Procedural Interface

ipworksedi_imap_register_callback($res, 12, array($this, 'fireSSLStatus'));

Parameter List

 'message'

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

StartTransfer Event (IPWorksEDI_IMAP Class)

This event is fired when the message body or the part data start transferring.

Object Oriented Interface

public function fireStartTransfer($param);

Procedural Interface

ipworksedi_imap_register_callback($res, 13, array($this, 'fireStartTransfer'));

Parameter List

 'direction'

Remarks

The StartTransfer event is fired when the message body or the part data start transferring from the server to the local host. Further progress information is provided by the Transfer and EndTransfer events.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Transfer Event (IPWorksEDI_IMAP Class)

This event is fired while the message is transferred from the MailServer .

Object Oriented Interface

public function fireTransfer($param);

Procedural Interface

ipworksedi_imap_register_callback($res, 14, array($this, 'fireTransfer'));

Parameter List

 'direction'
 'bytestransferred'
 'percentdone'
 'text'

Remarks

The Transfer event is fired for every incoming line when receiving a message or part data from the MailServer

The Text parameter contains the portion of the message or the part data being retrieved.

The BytesTransferred parameter contains the number of bytes transferred since the beginning of the message, including header bytes. At the end of transmission (i.e., when the last Transfer event is fired), BytesTransferred equals the value of the MessageSize property.

The Transfer event is fired for every line of the message. There is no terminating newline at the end of the Text parameter. A faster way to retrieve a message is to assign a value to the LocalFile property and use the Transfer event to check the progress only rather than to get the actual data.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Config Settings (IMAP Class)

IMAP Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Socket Config Settings

Base Config Settings