Struct ipworksedi::AS3Sender

Properties   Methods   Events   Config Settings   Errors  

The AS3Sender struct implements an AS3 / EDI-INT client.

Syntax

ipworksedi::AS3Sender

Remarks

The AS3Sender component may be used to send EDI or other messages over FTP/S, using the AS3 protocol. It may also be used to verify Message Disposition Notifications (MDNs) returned by the server.

A typical AS3 transaction is as follows:

(1) The sender sends an EDI document to the receiver using FTP. The document may be signed, encrypted, and/or compressed, and a signed or unsigned receipt may be requested.

(2) The receiver decompresses and decrypts the message and verifies the signature.

(3) The receiver sends a signed receipt back to the client. The signature is over the hash of an MDN, which contains a hash of the received message.

When sending an EDI message, the client should specify, at a minimum, as3_from and as3_to, edi_data, and edi_type. You will also need to specify user, password, and remote_host to logon to the FTP server. After doing this you may send the data by calling send.

To secure the EDI transmission, the message may be signed and/or encrypted by setting the appropriate certificates. By default, the struct will apply message security if the appropriate certificates are specified. To sign the data set signing_cert. To encrypt, set recipient_certs.

TLS/SSL may be enabled by setting the ssl_start_mode property. In case your trading partner is using a self-signed certificate it will be necessary to set ssl_accept_server_cert or trap the on_ssl_server_authentication event to accept the certificate.

The message may also be compressed by setting compression_format.

To request a receipt, or Message Disposition Notification (MDN), simply set the mdn_to property. The MDN will be returned to the FTP URL specified. The mdn_options property may be used to customize the request. By default, the struct will request a signed MDN over an SHA1 hash.

Validating AS3 MDNs

AS3 MDNs will be returned asynchronously over a separate connection. You may verify MDNs by invoking read_receipt. This will read the receipt from the FTP server (or from the mdn_receipt property). It will determine the message_id of the original message and determine the originator and recipient of the MDN.

You should then look up your trading partner's certificates as well as the original_content_mic (which you must store externally to verify signed receipts), and invoke verify_receipt.

Object Lifetime

The new() method returns a mutable reference to a struct instance. The object itself is kept in the global list maintained by IPWorksEDI. Due to this, the AS3Sender struct cannot be disposed of automatically. Please, call the dispose(&self) method of AS3Sender when you have finished using the instance.

Property List

The following is the full list of the properties of the struct with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the struct with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the struct with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the struct with short descriptions. Click on the links for further details.

as3_from property (AS3Sender Struct)

The identity of the sending system.

Syntax

fn as3_from(&self) -> Result<String, IPWorksEDIError> 
fn set_as3_from(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_as3_from_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

May be company name, DUNS number, or anything agreed on by trading partners.

Required.

Data Type

String

as3_to property (AS3Sender Struct)

The identity of the receiving system.

Syntax

fn as3_to(&self) -> Result<String, IPWorksEDIError> 
fn set_as3_to(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_as3_to_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

May be company name, DUNS number, or anything agreed on by trading partners.

Required.

Data Type

String

as3_version property (AS3Sender Struct)

The version of AS3 being used.

Syntax

fn as3_version(&self) -> Result<String, IPWorksEDIError> 
fn set_as3_version(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_as3_version_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

"1.0"

Remarks

The version of AS3 being used. Should be "1.0".

Data Type

String

attachment_count property (AS3Sender Struct)

The number of records in the Attachment arrays.

Syntax

fn attachment_count(&self) -> Result<i32, IPWorksEDIError> 
fn set_attachment_count(&self, value : i32) ->  Option<IPWorksEDIError> 

Default Value

0

Remarks

This property controls the size of the following arrays:

• attachment_content_type
• attachment_data
• attachment_file_name
• attachment_headers
• attachment_name

The array indices start at 0 and end at attachment_count - 1.

Data Type

i32

attachment_content_type property (AS3Sender Struct)

The MIME content-type of this ediattachment .

Syntax

fn attachment_content_type(&self, AttachmentIndex : i32) -> Result<String, IPWorksEDIError> 
fn set_attachment_content_type(&self, AttachmentIndex : i32, value : &str) ->  Option<IPWorksEDIError> 
fn set_attachment_content_type_ref(&self, AttachmentIndex : i32, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

The MIME content-type of this EDIAttachment.

The AttachmentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the attachment_count property.

Data Type

String

attachment_data property (AS3Sender Struct)

This property contains the attachment data.

Syntax

fn attachment_data(&self, AttachmentIndex : i32) -> Result<Vec<u8>, IPWorksEDIError> 
fn set_attachment_data(&self, AttachmentIndex : i32, value : Vec<u8>) ->  Option<IPWorksEDIError> 
fn set_attachment_data_ref(&self, AttachmentIndex : i32, value : &[u8]) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

In a receiver, the struct decodes the attachment to the attachment_data property when attachment_data's value is first queried. This property will contain the full decrypted text of the attachment.

The AttachmentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the attachment_count property.

Data Type

Vec<u8>

attachment_file_name property (AS3Sender Struct)

The file name of the attachment.

Syntax

fn attachment_file_name(&self, AttachmentIndex : i32) -> Result<String, IPWorksEDIError> 
fn set_attachment_file_name(&self, AttachmentIndex : i32, value : &str) ->  Option<IPWorksEDIError> 
fn set_attachment_file_name_ref(&self, AttachmentIndex : i32, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

The file name of the attachment. If incoming_directory has been specified, the attachment will be written to the specified directory and the name will be provided by this property. Otherwise, this will contain the name of the attachment as described in the attachment_headers.

The AttachmentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the attachment_count property.

Data Type

String

attachment_headers property (AS3Sender Struct)

The struct fills out Headers each time any of the other properties for that ediattachment are changed.

Syntax

fn attachment_headers(&self, AttachmentIndex : i32) -> Result<String, IPWorksEDIError> 
fn set_attachment_headers(&self, AttachmentIndex : i32, value : &str) ->  Option<IPWorksEDIError> 
fn set_attachment_headers_ref(&self, AttachmentIndex : i32, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

The struct fills out attachment_headers each time any of the other properties for that EDIAttachment are changed. If additional headers are needed they should be appended after all the other properties for that EDIAttachment are set.

The AttachmentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the attachment_count property.

Data Type

String

attachment_name property (AS3Sender Struct)

Name is the final name to be associated with the contents of either the Data or FileName properties.

Syntax

fn attachment_name(&self, AttachmentIndex : i32) -> Result<String, IPWorksEDIError> 
fn set_attachment_name(&self, AttachmentIndex : i32, value : &str) ->  Option<IPWorksEDIError> 
fn set_attachment_name_ref(&self, AttachmentIndex : i32, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

attachment_name is the final name to be associated with the contents of either the attachment_data or attachment_file_name properties. This corresponds to the filename attribute of the Content-Disposition header for this attachment.

The AttachmentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the attachment_count property.

Data Type

String

compression_format property (AS3Sender Struct)

The compression format (if any) to use.

Syntax

fn compression_format(&self) -> Result<i32, IPWorksEDIError> 
fn set_compression_format(&self, value : i32) ->  Option<IPWorksEDIError> 

Possible Values

0   // None
1   // ZLIB

Default Value

0

Remarks

By default, outgoing data will not be compressed. Setting this property will instruct the struct to compress the outgoing data using the indicated format.

Compression is highly recommended for large messages, as it will reduce network bandwidth and processing time required.

The compression algorithm used is Zlib, as required by RFC 3274 and defined in RFCs 1950 and 1951.

Data Type

i32

connected property (AS3Sender Struct)

Whether the struct is connected.

Syntax

fn connected(&self) -> Result<bool, IPWorksEDIError> 

Default Value

false

Remarks

This property is used to determine whether or not the struct is connected to the remote host. Use the connect and disconnect methods to manage the connection.

This property is read-only.

Data Type

bool

edi_data property (AS3Sender Struct)

This property contains the EDI payload of the transmission.

Syntax

fn edi_data(&self) -> Result<Vec<u8>, IPWorksEDIError> 
fn set_edi_data(&self, value : Vec<u8>) ->  Option<IPWorksEDIError> 
fn set_edi_data_ref(&self, value : &[u8]) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

In a receiver, this property will only be populated if incoming_directory and edi_output_stream have not been specified and parse_request finishes without an error, setting scan_result to 0. If so, Data will contain the full decrypted text of the EDI message.

Data Type

Vec<u8>

edi_type property (AS3Sender Struct)

The Content-Type of the EDI message.

Syntax

fn edi_type(&self) -> Result<String, IPWorksEDIError> 
fn set_edi_type(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_edi_type_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

The Content-Type of the EDI message. Sample values might be "application/edi-x12", "application/edifact" or "application/xml".

Data Type

String

edi_name property (AS3Sender Struct)

Name is the final name to be associated with the contents of either the Data or FileName properties.

Syntax

fn edi_name(&self) -> Result<String, IPWorksEDIError> 
fn set_edi_name(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_edi_name_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

"rfc1767.edi"

Remarks

edi_name is the final name to be associated with the contents of either the edi_data or edi_file_name properties. This corresponds to the filename attribute of the Content-Disposition header for the EDI payload.

When constructing EDI data to be sent, edi_name will be set to the same value as edi_file_name, but can be overridden after setting edi_file_name to indicate that another name should be used in the outbound request's Content-Disposition MIME header.

When receiving EDI data, edi_name will be read out of the "filename" attribute of the inbound request's Content-Disposition MIME header.

Data Type

String

edi_file_name property (AS3Sender Struct)

In a sender, if FileName is specified, the file specified will be used for the EDI payload of the transmission.

Syntax

fn edi_file_name(&self) -> Result<String, IPWorksEDIError> 
fn set_edi_file_name(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_edi_file_name_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

In a sender, if edi_file_name is specified, the file specified will be used for the EDI payload of the transmission. edi_name will be populated with the name of the file.

In a receiver, when incoming_directory is set, this will be populated with the absolute path of the file which contains the processed message contents.

Note: When edi_output_stream is set, the data will be written to the stream and this property will not be populated.

Data Type

String

encryption_algorithm property (AS3Sender Struct)

The algorithm used to encrypt the EDI data.

Syntax

fn encryption_algorithm(&self) -> Result<String, IPWorksEDIError> 
fn set_encryption_algorithm(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_encryption_algorithm_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

"AESCBC256"

Remarks

If recipient_certs contains a valid certificate, the data will be encrypted using this certificate and the algorithm specified in encryption_algorithm. If encryption_algorithm is set to the empty string, the data will not be encrypted.

The struct supports "AESCBC256", or industry-standard 256-bit AES-CBC encryption, by default.

The struct supports "AES" encryption with a default keysize of 128 bits. You may also set "AESCBC192", "AESCBC256", "AESGCM128", "AESGCM192", or "AESGCM256" for other AES modes and keysizes. 3DES and DES remain available for legacy interoperability.

Possible values are:

• 3DES
• DES
• AESCBC128
• AESCBC192
• AESCBC256 (default)
• AESGCM128
• AESGCM192
• AESGCM256

Data Type

String

firewall_auto_detect property (AS3Sender Struct)

Whether to automatically detect and use firewall system settings, if available.

Syntax

fn firewall_auto_detect(&self) -> Result<bool, IPWorksEDIError> 
fn set_firewall_auto_detect(&self, value : bool) ->  Option<IPWorksEDIError> 

Default Value

false

Remarks

Data Type

bool

firewall_type property (AS3Sender Struct)

The type of firewall to connect through.

Syntax

fn firewall_type(&self) -> Result<i32, IPWorksEDIError> 
fn set_firewall_type(&self, value : i32) ->  Option<IPWorksEDIError> 

Possible Values

0   // None
1   // Tunnel
2   // SOCKS4
3   // SOCKS5
10   // SOCKS4A

Default Value

0

Remarks

The type of firewall to connect through. The applicable values are as follows:

Data Type

i32

firewall_host property (AS3Sender Struct)

The name or IP address of the firewall (optional).

Syntax

fn firewall_host(&self) -> Result<String, IPWorksEDIError> 
fn set_firewall_host(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_firewall_host_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

The name or IP address of the firewall (optional). If a firewall_host is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the struct fails with an error.

Data Type

String

firewall_password property (AS3Sender Struct)

A password if authentication is to be used when connecting through the firewall.

Syntax

fn firewall_password(&self) -> Result<String, IPWorksEDIError> 
fn set_firewall_password(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_firewall_password_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

A password if authentication is to be used when connecting through the firewall. If firewall_host is specified, the firewall_user and firewall_password properties are used to connect and authenticate to the given firewall. If the authentication fails, the struct fails with an error.

Data Type

String

firewall_port property (AS3Sender Struct)

The Transmission Control Protocol (TCP) port for the firewall Host .

Syntax

fn firewall_port(&self) -> Result<i32, IPWorksEDIError> 
fn set_firewall_port(&self, value : i32) ->  Option<IPWorksEDIError> 

Default Value

0

Remarks

The Transmission Control Protocol (TCP) port for the firewall firewall_host. See the description of the firewall_host property for details.

NOTE: This property is set automatically when firewall_type is set to a valid value. See the description of the firewall_type property for details.

Data Type

i32

firewall_user property (AS3Sender Struct)

A username if authentication is to be used when connecting through a firewall.

Syntax

fn firewall_user(&self) -> Result<String, IPWorksEDIError> 
fn set_firewall_user(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_firewall_user_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

A username if authentication is to be used when connecting through a firewall. If firewall_host is specified, this property and the firewall_password property are used to connect and authenticate to the given Firewall. If the authentication fails, the struct fails with an error.

Data Type

String

ftp_last_reply property (AS3Sender Struct)

The last reply from the FTP server.

Syntax

fn ftp_last_reply(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The last reply from the FTP server.

This property is read-only.

Data Type

String

local_host property (AS3Sender Struct)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

fn local_host(&self) -> Result<String, IPWorksEDIError> 
fn set_local_host(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_local_host_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the struct initiate connections (or accept in the case of server structs) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the struct is connected, the local_host property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

NOTE: local_host is not persistent. You must always set it in code, and never in the property window.

Data Type

String

log_directory property (AS3Sender Struct)

The path to a directory for logging.

Syntax

fn log_directory(&self) -> Result<String, IPWorksEDIError> 
fn set_log_directory(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_log_directory_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

Setting LogDirectory will instruct the component to log the details of each transmission to unique files in the specified directory. For each request processed, the struct will log the original EDI data, the complete text of the outgoing request and the incoming response.

The struct will write a file for each transmission, with extension ".log". In case of error an additional file will be written with extension ".err", and the error will be reported in both files. Raw AS3 messages created or downloaded by the struct will be written with extension ".as3", and MDNs created or downloaded will be written with extension ".as3-mdn".

The filenames will be chosen automatically by the struct. Each filename will be the system time, in the format YYYY-MM-DD-HH-MM-SS-MMMM, with extensions "-2", "-3", used in case files of those names already exist. After each transaction is processed log_file will contain the name of the files just written, minus the extension ".log" or ".err".

If logs cannot be written an exception will be thrown.

Data Type

String

log_file property (AS3Sender Struct)

The log file written.

Syntax

fn log_file(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

In case log_directory is specified two log files will be written in the specified directory and log_file will contain the path.

log_file will in fact refer to several files with appropriate extensions. A diagnostic log will be written with filename log_file + ".log", and any EDI data read will be written with filename log_file + ".dat". Raw AS3 messages and MDNs will also be written with extensions ".as3" and ".as3-mdn".

This property is read-only.

Data Type

String

mdn_options property (AS3Sender Struct)

Used to indicate the options requested for the MDN receipt.

Syntax

fn mdn_options(&self) -> Result<String, IPWorksEDIError> 
fn set_mdn_options(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_mdn_options_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

"signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha-256"

Remarks

By default, the struct will request that the MDN be signed with a PKCS#7 signature over a SHA-256 hash, which is the industry standard.

Set mdn_options to an empty string to request an unsigned receipt.

This property will automatically be updated when signature_algorithm is set. Normally you will not need to set this property, however you can set a value here to override the automatically generated value.

The string format is that of the Disposition-Notification-Options HTTP header, as specified in RFC 3335. As a form of shorthand, you may set this property to "sha1", "sha-256", or "md5" to request the indicated hash algorithm.

When as2_version is set to "1.3", MD5, SHA-1, and SHA-224 are not allowed in the requested MIC algorithms. SHA-256, SHA-384, or SHA-512 are recommended instead.

Data Type

String

mdn_receipt_content property (AS3Sender Struct)

This contains the entire content of the MDN Receipt.

Syntax

fn mdn_receipt_content(&self) -> Result<Vec<u8>, IPWorksEDIError> 
fn set_mdn_receipt_content(&self, value : Vec<u8>) ->  Option<IPWorksEDIError> 
fn set_mdn_receipt_content_ref(&self, value : &[u8]) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

This contains the entire content of the MDN Receipt. This is a multipart/report entity consisting of a machine readable mdn_receipt_mdn (Message Disposition Notification) and a human readable mdn_receipt_message, which itself may be embedded in a multipart/signed entity if requested by the AS2 sender.

Data Type

Vec<u8>

mdn_receipt_header_count property (AS3Sender Struct)

The number of headers in the MDN.

Syntax

fn mdn_receipt_header_count(&self) -> Result<i32, IPWorksEDIError> 

Default Value

0

Remarks

The number of headers in the MDN.

This property is read-only.

Data Type

i32

mdn_receipt_header_field property (AS3Sender Struct)

The property name of the MDN header currently selected by HeaderIndex .

Syntax

fn mdn_receipt_header_field(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The field name of the MDN header currently selected by mdn_receipt_header_index.

This property is read-only.

Data Type

String

mdn_receipt_header_index property (AS3Sender Struct)

Which MDN header is currently selected to populate HeaderField and HeaderValue .

Syntax

fn mdn_receipt_header_index(&self) -> Result<i32, IPWorksEDIError> 
fn set_mdn_receipt_header_index(&self, value : i32) ->  Option<IPWorksEDIError> 

Default Value

0

Remarks

Valid values are 0 to mdn_receipt_header_count - 1.

Data Type

i32

mdn_receipt_headers property (AS3Sender Struct)

Headers contains all of the headers of the AS2 MDN Receipt as a single string.

Syntax

fn mdn_receipt_headers(&self) -> Result<String, IPWorksEDIError> 
fn set_mdn_receipt_headers(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_mdn_receipt_headers_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

Headers contains all of the headers of the AS2 MDN Receipt as a single string. This will include headers such as AS2-From, AS2-To, Date, Content-Type, etc. In an AS2Sender, these will also contain the transport headers of the MDN Receipt (HTTP or SMTP headers, depending on the delivery option).

You can also use mdn_receipt_header_count, mdn_receipt_header_index, mdn_receipt_header_field, and mdn_receipt_header_value to easily iterate through each individual header.

Data Type

String

mdn_receipt_header_value property (AS3Sender Struct)

The value of the MDN header currently selected by HeaderIndex .

Syntax

fn mdn_receipt_header_value(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The value of the MDN header currently selected by mdn_receipt_header_index.

This property is read-only.

Data Type

String

mdn_receipt_mdn property (AS3Sender Struct)

MDN will contain the entire machine readable text of the Message Disposition Notification in the receipt.

Syntax

fn mdn_receipt_mdn(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

MDN will contain the entire machine readable text of the Message Disposition Notification in the receipt. It will report either success or failure depending on the processing status of the receiver. In either case, it will be RFC-compliant.

This property is read-only.

Data Type

String

mdn_receipt_message property (AS3Sender Struct)

The human-readable portion of the MDN receipt.

Syntax

fn mdn_receipt_message(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The human-readable portion of the MDN receipt that indicates the status of the message processing. This can be used to provide the user with a helpful message in the event that an error is encountered.

This property is read-only.

Data Type

String

mdn_receipt_mic_value property (AS3Sender Struct)

The Message Integrity Check(s) (one-way hash) of the original EDI message.

Syntax

fn mdn_receipt_mic_value(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

An MDN Receipt contains a MIC calculated over the EDI message that the receipt is in response to, to be matched on the sender side against a saved value for the original request to ensure that the integrity of the data that the receiver reports is preserved. When a signed receipt is requested, the MIC is be calculated using the algorithm used on the incoming message's signature, or SHA-1 if the incoming message is not signed.

The MIC will be base64 encoded and reported with the algorithm name as specified in RFC 3335; e.g., w7AguNJEmhF/qIjJw6LnnA==, md5.

This property is read-only.

Data Type

String

mdn_receipt_signing_protocol property (AS3Sender Struct)

This property contains the MIME type of the signature used, if any (i.

Syntax

fn mdn_receipt_signing_protocol(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

This property contains the MIME type of the signature used, if any (i.e., "application/pkcs7-signature"), to create this MDNReceipt. It will contain an empty string if the receipt is unsigned.

This property is read-only.

Data Type

String

mdn_to property (AS3Sender Struct)

The system to which an MDN should be directed.

Syntax

fn mdn_to(&self) -> Result<String, IPWorksEDIError> 
fn set_mdn_to(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_mdn_to_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

If this property is set, a Disposition-Notification-To header will be added to the request, and an MDN will be requested. You should specify a valid FTP URL for the request, e.g., "ftp://123.0.0.1".

By default, the struct will request a PKCS#7 signature signed over SHA-1. You may set mdn_options to customize this.

Data Type

String

message_id property (AS3Sender Struct)

The Id of the message.

Syntax

fn message_id(&self) -> Result<String, IPWorksEDIError> 
fn set_message_id(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_message_id_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

The Id format is as in RFC 2822: id-left@id-right .

A unique Id will automatically be generated on startup. Sending a message will reset id-left if the MessageId has been used in the previous message.

If you set message_id to a string of the form "@(id-right)" a unique id-left will be generated. If you set message_id to an empty string, a new message_id will be generated with the same id-right.

After an mdn_receipt is returned or set, message_id will contain the Original-Message-ID found in the MDN Receipt.

Data Type

String

original_content_mic property (AS3Sender Struct)

The Message Integrity Check(s) (one-way hash) of the outgoing message.

Syntax

fn original_content_mic(&self) -> Result<String, IPWorksEDIError> 
fn set_original_content_mic(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_original_content_mic_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

A MIC will be calculated over the outgoing message using the same algorithm in the signature_algorithm configuration used to sign the message. The property will be set when post (in AS3, send) is invoked, and the MIC will automatically be checked against the Original-Content-MIC in the MDN for synchronous MDNs.

The format is in RFC 3335, i.e. w7AguNJEmhF/qIjJw6LnnA==, md5, with a newline at the end.

If you are requesting an asynchronous MDN, you must save this value externally so that it can be loaded when the MDN is received (you may also use async_mdn_info_dir).

Data Type

String

passive property (AS3Sender Struct)

This controls whether or not to direct the server into a passive mode. It is recommended if behind a firewall.

Syntax

fn passive(&self) -> Result<bool, IPWorksEDIError> 
fn set_passive(&self, value : bool) ->  Option<IPWorksEDIError> 

Default Value

true

Remarks

This property controls whether or not to direct the server into a passive mode. Many firewalls will not allow the FTP server to open a connection from outside to the higher ports where the FTP client struct expects them to be. If passive is set to TRUE, the struct will use the PASV command instead of the PORT command and thus will direct the server into a passive mode: connections are initiated only by the client.

Data Type

bool

password property (AS3Sender Struct)

This is the password used to log in.

Syntax

fn password(&self) -> Result<String, IPWorksEDIError> 
fn set_password(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_password_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

This property contains the password used to log in. It must be set before the struct connects to the FTP server.

Data Type

String

receipt_signer_cert_effective_date property (AS3Sender Struct)

The date on which this certificate becomes valid.

Syntax

fn receipt_signer_cert_effective_date(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

receipt_signer_cert_expiration_date property (AS3Sender Struct)

The date on which the certificate expires.

Syntax

fn receipt_signer_cert_expiration_date(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

receipt_signer_cert_extended_key_usage property (AS3Sender Struct)

A comma-delimited list of extended key usage identifiers.

Syntax

fn receipt_signer_cert_extended_key_usage(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

receipt_signer_cert_fingerprint property (AS3Sender Struct)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

fn receipt_signer_cert_fingerprint(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

receipt_signer_cert_fingerprint_sha1 property (AS3Sender Struct)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

fn receipt_signer_cert_fingerprint_sha1(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

receipt_signer_cert_fingerprint_sha256 property (AS3Sender Struct)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

fn receipt_signer_cert_fingerprint_sha256(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

receipt_signer_cert_issuer property (AS3Sender Struct)

The issuer of the certificate.

Syntax

fn receipt_signer_cert_issuer(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

receipt_signer_cert_private_key property (AS3Sender Struct)

The private key of the certificate (if available).

Syntax

fn receipt_signer_cert_private_key(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

NOTE: The receipt_signer_cert_private_key may be available but not exportable. In this case, receipt_signer_cert_private_key returns an empty string.

This property is read-only.

Data Type

String

receipt_signer_cert_private_key_available property (AS3Sender Struct)

Whether a PrivateKey is available for the selected certificate.

Syntax

fn receipt_signer_cert_private_key_available(&self) -> Result<bool, IPWorksEDIError> 

Default Value

false

Remarks

Whether a receipt_signer_cert_private_key is available for the selected certificate. If receipt_signer_cert_private_key_available is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

bool

receipt_signer_cert_private_key_container property (AS3Sender Struct)

The name of the PrivateKey container for the certificate (if available).

Syntax

fn receipt_signer_cert_private_key_container(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The name of the receipt_signer_cert_private_key container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

receipt_signer_cert_public_key property (AS3Sender Struct)

The public key of the certificate.

Syntax

fn receipt_signer_cert_public_key(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

receipt_signer_cert_public_key_algorithm property (AS3Sender Struct)

The textual description of the certificate's public key algorithm.

Syntax

fn receipt_signer_cert_public_key_algorithm(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

receipt_signer_cert_public_key_length property (AS3Sender Struct)

The length of the certificate's public key (in bits).

Syntax

fn receipt_signer_cert_public_key_length(&self) -> Result<i32, IPWorksEDIError> 

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

i32

receipt_signer_cert_serial_number property (AS3Sender Struct)

The serial number of the certificate encoded as a string.

Syntax

fn receipt_signer_cert_serial_number(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

receipt_signer_cert_signature_algorithm property (AS3Sender Struct)

The text description of the certificate's signature algorithm.

Syntax

fn receipt_signer_cert_signature_algorithm(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

receipt_signer_cert_store property (AS3Sender Struct)

The name of the certificate store for the client certificate.

Syntax

fn receipt_signer_cert_store(&self) -> Result<Vec<u8>, IPWorksEDIError> 
fn set_receipt_signer_cert_store(&self, value : Vec<u8>) ->  Option<IPWorksEDIError> 
fn set_receipt_signer_cert_store_ref(&self, value : &[u8]) ->  Option<IPWorksEDIError> 

Default Value

"MY"

Remarks

The receipt_signer_cert_store_type property denotes the type of the certificate store specified by receipt_signer_cert_store. If the store is password-protected, specify the password in receipt_signer_cert_store_password.

receipt_signer_cert_store is used in conjunction with the receipt_signer_cert_subject property to specify client certificates. If receipt_signer_cert_store has a value, and receipt_signer_cert_subject or receipt_signer_cert_encoded is set, a search for a certificate is initiated. Please see the receipt_signer_cert_subject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Vec<u8>

receipt_signer_cert_store_password property (AS3Sender Struct)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

fn receipt_signer_cert_store_password(&self) -> Result<String, IPWorksEDIError> 
fn set_receipt_signer_cert_store_password(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_receipt_signer_cert_store_password_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

receipt_signer_cert_store_type property (AS3Sender Struct)

The type of certificate store for this certificate.

Syntax

fn receipt_signer_cert_store_type(&self) -> Result<i32, IPWorksEDIError> 
fn set_receipt_signer_cert_store_type(&self, value : i32) ->  Option<IPWorksEDIError> 

Possible Values

0   // User
1   // Machine
2   // PFXFile
3   // PFXBlob
4   // JKSFile
5   // JKSBlob
6   // PEMKeyFile
7   // PEMKeyBlob
8   // PublicKeyFile
9   // PublicKeyBlob
10   // SSHPublicKeyBlob
11   // P7BFile
12   // P7BBlob
13   // SSHPublicKeyFile
14   // PPKFile
15   // PPKBlob
16   // XMLFile
17   // XMLBlob
18   // JWKFile
19   // JWKBlob
20   // SecurityKey
21   // BCFKSFile
22   // BCFKSBlob
23   // PKCS11
99   // Auto

Default Value

0

Remarks

The struct supports both public and private keys in a variety of formats. When the cstAuto value is used, the struct will automatically determine the type. This property can take one of the following values:

Data Type

i32

receipt_signer_cert_subject_alt_names property (AS3Sender Struct)

Comma-separated lists of alternative subject names for the certificate.

Syntax

fn receipt_signer_cert_subject_alt_names(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

receipt_signer_cert_thumbprint_md5 property (AS3Sender Struct)

The MD5 hash of the certificate.

Syntax

fn receipt_signer_cert_thumbprint_md5(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

receipt_signer_cert_thumbprint_sha1 property (AS3Sender Struct)

The SHA-1 hash of the certificate.

Syntax

fn receipt_signer_cert_thumbprint_sha1(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

receipt_signer_cert_thumbprint_sha256 property (AS3Sender Struct)

The SHA-256 hash of the certificate.

Syntax

fn receipt_signer_cert_thumbprint_sha256(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

receipt_signer_cert_usage property (AS3Sender Struct)

The text description of UsageFlags .

Syntax

fn receipt_signer_cert_usage(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

receipt_signer_cert_usage_flags property (AS3Sender Struct)

The flags that show intended use for the certificate.

Syntax

fn receipt_signer_cert_usage_flags(&self) -> Result<i32, IPWorksEDIError> 

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of receipt_signer_cert_usage_flags is a combination of the following flags:

Please see the receipt_signer_cert_usage property for a text representation of receipt_signer_cert_usage_flags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

i32

receipt_signer_cert_version property (AS3Sender Struct)

The certificate's version number.

Syntax

fn receipt_signer_cert_version(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

receipt_signer_cert_subject property (AS3Sender Struct)

The subject of the certificate used for client authentication.

Syntax

fn receipt_signer_cert_subject(&self) -> Result<String, IPWorksEDIError> 
fn set_receipt_signer_cert_subject(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_receipt_signer_cert_subject_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=example@email.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

receipt_signer_cert_encoded property (AS3Sender Struct)

The certificate (PEM/Base64 encoded).

Syntax

fn receipt_signer_cert_encoded(&self) -> Result<Vec<u8>, IPWorksEDIError> 
fn set_receipt_signer_cert_encoded(&self, value : Vec<u8>) ->  Option<IPWorksEDIError> 
fn set_receipt_signer_cert_encoded_ref(&self, value : &[u8]) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The receipt_signer_cert_store and receipt_signer_cert_subject properties also may be used to specify a certificate.

When receipt_signer_cert_encoded is set, a search is initiated in the current receipt_signer_cert_store for the private key of the certificate. If the key is found, receipt_signer_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, receipt_signer_cert_subject is set to an empty string.

Data Type

Vec<u8>

recipient_cert_count property (AS3Sender Struct)

The number of records in the RecipientCert arrays.

Syntax

fn recipient_cert_count(&self) -> Result<i32, IPWorksEDIError> 
fn set_recipient_cert_count(&self, value : i32) ->  Option<IPWorksEDIError> 

Default Value

0

Remarks

This property controls the size of the following arrays:

• recipient_cert_effective_date
• recipient_cert_encoded
• recipient_cert_expiration_date
• recipient_cert_extended_key_usage
• recipient_cert_fingerprint
• recipient_cert_fingerprint_sha1
• recipient_cert_fingerprint_sha256
• recipient_cert_issuer
• recipient_cert_private_key
• recipient_cert_private_key_available
• recipient_cert_private_key_container
• recipient_cert_public_key
• recipient_cert_public_key_algorithm
• recipient_cert_public_key_length
• recipient_cert_serial_number
• recipient_cert_signature_algorithm
• recipient_cert_store
• recipient_cert_store_password
• recipient_cert_store_type
• recipient_cert_subject
• recipient_cert_subject_alt_names
• recipient_cert_thumbprint_md5
• recipient_cert_thumbprint_sha1
• recipient_cert_thumbprint_sha256
• recipient_cert_usage
• recipient_cert_usage_flags
• recipient_cert_version

The array indices start at 0 and end at recipient_cert_count - 1.

Data Type

i32

recipient_cert_effective_date property (AS3Sender Struct)

The date on which this certificate becomes valid.

Syntax

fn recipient_cert_effective_date(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_expiration_date property (AS3Sender Struct)

The date on which the certificate expires.

Syntax

fn recipient_cert_expiration_date(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_extended_key_usage property (AS3Sender Struct)

A comma-delimited list of extended key usage identifiers.

Syntax

fn recipient_cert_extended_key_usage(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_fingerprint property (AS3Sender Struct)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

fn recipient_cert_fingerprint(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_fingerprint_sha1 property (AS3Sender Struct)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

fn recipient_cert_fingerprint_sha1(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_fingerprint_sha256 property (AS3Sender Struct)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

fn recipient_cert_fingerprint_sha256(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_issuer property (AS3Sender Struct)

The issuer of the certificate.

Syntax

fn recipient_cert_issuer(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_private_key property (AS3Sender Struct)

The private key of the certificate (if available).

Syntax

fn recipient_cert_private_key(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

NOTE: The recipient_cert_private_key may be available but not exportable. In this case, recipient_cert_private_key returns an empty string.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_private_key_available property (AS3Sender Struct)

Whether a PrivateKey is available for the selected certificate.

Syntax

fn recipient_cert_private_key_available(&self, RecipientCertIndex : i32) -> Result<bool, IPWorksEDIError> 

Default Value

false

Remarks

Whether a recipient_cert_private_key is available for the selected certificate. If recipient_cert_private_key_available is True, the certificate may be used for authentication purposes (e.g., server authentication).

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

bool

recipient_cert_private_key_container property (AS3Sender Struct)

The name of the PrivateKey container for the certificate (if available).

Syntax

fn recipient_cert_private_key_container(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The name of the recipient_cert_private_key container for the certificate (if available). This functionality is available only on Windows platforms.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_public_key property (AS3Sender Struct)

The public key of the certificate.

Syntax

fn recipient_cert_public_key(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_public_key_algorithm property (AS3Sender Struct)

The textual description of the certificate's public key algorithm.

Syntax

fn recipient_cert_public_key_algorithm(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_public_key_length property (AS3Sender Struct)

The length of the certificate's public key (in bits).

Syntax

fn recipient_cert_public_key_length(&self, RecipientCertIndex : i32) -> Result<i32, IPWorksEDIError> 

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

i32

recipient_cert_serial_number property (AS3Sender Struct)

The serial number of the certificate encoded as a string.

Syntax

fn recipient_cert_serial_number(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_signature_algorithm property (AS3Sender Struct)

The text description of the certificate's signature algorithm.

Syntax

fn recipient_cert_signature_algorithm(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_store property (AS3Sender Struct)

The name of the certificate store for the client certificate.

Syntax

fn recipient_cert_store(&self, RecipientCertIndex : i32) -> Result<Vec<u8>, IPWorksEDIError> 
fn set_recipient_cert_store(&self, RecipientCertIndex : i32, value : Vec<u8>) ->  Option<IPWorksEDIError> 
fn set_recipient_cert_store_ref(&self, RecipientCertIndex : i32, value : &[u8]) ->  Option<IPWorksEDIError> 

Default Value

"MY"

Remarks

The recipient_cert_store_type property denotes the type of the certificate store specified by recipient_cert_store. If the store is password-protected, specify the password in recipient_cert_store_password.

recipient_cert_store is used in conjunction with the recipient_cert_subject property to specify client certificates. If recipient_cert_store has a value, and recipient_cert_subject or recipient_cert_encoded is set, a search for a certificate is initiated. Please see the recipient_cert_subject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

Data Type

Vec<u8>

recipient_cert_store_password property (AS3Sender Struct)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

fn recipient_cert_store_password(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 
fn set_recipient_cert_store_password(&self, RecipientCertIndex : i32, value : &str) ->  Option<IPWorksEDIError> 
fn set_recipient_cert_store_password_ref(&self, RecipientCertIndex : i32, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

Data Type

String

recipient_cert_store_type property (AS3Sender Struct)

The type of certificate store for this certificate.

Syntax

fn recipient_cert_store_type(&self, RecipientCertIndex : i32) -> Result<i32, IPWorksEDIError> 
fn set_recipient_cert_store_type(&self, RecipientCertIndex : i32, value : i32) ->  Option<IPWorksEDIError> 

Possible Values

0   // User
1   // Machine
2   // PFXFile
3   // PFXBlob
4   // JKSFile
5   // JKSBlob
6   // PEMKeyFile
7   // PEMKeyBlob
8   // PublicKeyFile
9   // PublicKeyBlob
10   // SSHPublicKeyBlob
11   // P7BFile
12   // P7BBlob
13   // SSHPublicKeyFile
14   // PPKFile
15   // PPKBlob
16   // XMLFile
17   // XMLBlob
18   // JWKFile
19   // JWKBlob
20   // SecurityKey
21   // BCFKSFile
22   // BCFKSBlob
23   // PKCS11
99   // Auto

Default Value

0

Remarks

The struct supports both public and private keys in a variety of formats. When the cstAuto value is used, the struct will automatically determine the type. This property can take one of the following values:

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

Data Type

i32

recipient_cert_subject_alt_names property (AS3Sender Struct)

Comma-separated lists of alternative subject names for the certificate.

Syntax

fn recipient_cert_subject_alt_names(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_thumbprint_md5 property (AS3Sender Struct)

The MD5 hash of the certificate.

Syntax

fn recipient_cert_thumbprint_md5(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_thumbprint_sha1 property (AS3Sender Struct)

The SHA-1 hash of the certificate.

Syntax

fn recipient_cert_thumbprint_sha1(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_thumbprint_sha256 property (AS3Sender Struct)

The SHA-256 hash of the certificate.

Syntax

fn recipient_cert_thumbprint_sha256(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_usage property (AS3Sender Struct)

The text description of UsageFlags .

Syntax

fn recipient_cert_usage(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_usage_flags property (AS3Sender Struct)

The flags that show intended use for the certificate.

Syntax

fn recipient_cert_usage_flags(&self, RecipientCertIndex : i32) -> Result<i32, IPWorksEDIError> 

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of recipient_cert_usage_flags is a combination of the following flags:

Please see the recipient_cert_usage property for a text representation of recipient_cert_usage_flags.

This functionality currently is not available when the provider is OpenSSL.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

i32

recipient_cert_version property (AS3Sender Struct)

The certificate's version number.

Syntax

fn recipient_cert_version(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

This property is read-only.

Data Type

String

recipient_cert_subject property (AS3Sender Struct)

The subject of the certificate used for client authentication.

Syntax

fn recipient_cert_subject(&self, RecipientCertIndex : i32) -> Result<String, IPWorksEDIError> 
fn set_recipient_cert_subject(&self, RecipientCertIndex : i32, value : &str) ->  Option<IPWorksEDIError> 
fn set_recipient_cert_subject_ref(&self, RecipientCertIndex : i32, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=example@email.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

Data Type

String

recipient_cert_encoded property (AS3Sender Struct)

The certificate (PEM/Base64 encoded).

Syntax

fn recipient_cert_encoded(&self, RecipientCertIndex : i32) -> Result<Vec<u8>, IPWorksEDIError> 
fn set_recipient_cert_encoded(&self, RecipientCertIndex : i32, value : Vec<u8>) ->  Option<IPWorksEDIError> 
fn set_recipient_cert_encoded_ref(&self, RecipientCertIndex : i32, value : &[u8]) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The recipient_cert_store and recipient_cert_subject properties also may be used to specify a certificate.

When recipient_cert_encoded is set, a search is initiated in the current recipient_cert_store for the private key of the certificate. If the key is found, recipient_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, recipient_cert_subject is set to an empty string.

The RecipientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the recipient_cert_count property.

Data Type

Vec<u8>

remote_host property (AS3Sender Struct)

This is the domain name or IP address of the FTP server.

Syntax

fn remote_host(&self) -> Result<String, IPWorksEDIError> 
fn set_remote_host(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_remote_host_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

This property specifies the IP address (IP number in dotted internet format) or the domain name of the FTP server. It is set before a connection is attempted and cannot be changed once a connection is in progress.

If this property is set to a domain name, a DNS request is initiated and upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, an error is returned.

If the struct is configured to use a SOCKS firewall, the value assigned to this property may be preceded with an "*". If this is the case, the host name is passed to the firewall unresolved and the firewall performs the DNS resolution.

Data Type

String

remote_port property (AS3Sender Struct)

This is the port for the FTP service (default is 21).

Syntax

fn remote_port(&self) -> Result<i32, IPWorksEDIError> 
fn set_remote_port(&self, value : i32) ->  Option<IPWorksEDIError> 

Default Value

21

Remarks

This property contains the port for the FTP service, which defaults to 21 if not set. A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

For an implicit Secure Sockets Layer (SSL), use port 990 (please see the ssl_start_mode property for more information).

Data Type

i32

signature_algorithm property (AS3Sender Struct)

Signature algorithm to be used in outgoing messages.

Syntax

fn signature_algorithm(&self) -> Result<String, IPWorksEDIError> 
fn set_signature_algorithm(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_signature_algorithm_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

"sha-256"

Remarks

Signature Algorithm can be set to indicate the preferred signing algorithm. Possible values are:

• sha1
• md5
• sha-256 (or sha256) (default)
• sha-384 (or sha384)
• sha-512 (or sha512)
• sha-224 (or sha224)

The default value is "sha-256". When this property is set the mdn_options property is automatically updated to request the MDN receipt be signed with the same algorithm.

When as2_version is set to "1.3", MD5, SHA-1, and SHA-224 are not allowed for generated messages. "sha-256", "sha-384", or "sha-512" are recommended instead.

Data Type

String

signing_cert_effective_date property (AS3Sender Struct)

The date on which this certificate becomes valid.

Syntax

fn signing_cert_effective_date(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

signing_cert_expiration_date property (AS3Sender Struct)

The date on which the certificate expires.

Syntax

fn signing_cert_expiration_date(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

signing_cert_extended_key_usage property (AS3Sender Struct)

A comma-delimited list of extended key usage identifiers.

Syntax

fn signing_cert_extended_key_usage(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

signing_cert_fingerprint property (AS3Sender Struct)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

fn signing_cert_fingerprint(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

signing_cert_fingerprint_sha1 property (AS3Sender Struct)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

fn signing_cert_fingerprint_sha1(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

signing_cert_fingerprint_sha256 property (AS3Sender Struct)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

fn signing_cert_fingerprint_sha256(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

signing_cert_issuer property (AS3Sender Struct)

The issuer of the certificate.

Syntax

fn signing_cert_issuer(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

signing_cert_private_key property (AS3Sender Struct)

The private key of the certificate (if available).

Syntax

fn signing_cert_private_key(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

NOTE: The signing_cert_private_key may be available but not exportable. In this case, signing_cert_private_key returns an empty string.

This property is read-only.

Data Type

String

signing_cert_private_key_available property (AS3Sender Struct)

Whether a PrivateKey is available for the selected certificate.

Syntax

fn signing_cert_private_key_available(&self) -> Result<bool, IPWorksEDIError> 

Default Value

false

Remarks

Whether a signing_cert_private_key is available for the selected certificate. If signing_cert_private_key_available is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

bool

signing_cert_private_key_container property (AS3Sender Struct)

The name of the PrivateKey container for the certificate (if available).

Syntax

fn signing_cert_private_key_container(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The name of the signing_cert_private_key container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

signing_cert_public_key property (AS3Sender Struct)

The public key of the certificate.

Syntax

fn signing_cert_public_key(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

signing_cert_public_key_algorithm property (AS3Sender Struct)

The textual description of the certificate's public key algorithm.

Syntax

fn signing_cert_public_key_algorithm(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

signing_cert_public_key_length property (AS3Sender Struct)

The length of the certificate's public key (in bits).

Syntax

fn signing_cert_public_key_length(&self) -> Result<i32, IPWorksEDIError> 

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

i32

signing_cert_serial_number property (AS3Sender Struct)

The serial number of the certificate encoded as a string.

Syntax

fn signing_cert_serial_number(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

signing_cert_signature_algorithm property (AS3Sender Struct)

The text description of the certificate's signature algorithm.

Syntax

fn signing_cert_signature_algorithm(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

signing_cert_store property (AS3Sender Struct)

The name of the certificate store for the client certificate.

Syntax

fn signing_cert_store(&self) -> Result<Vec<u8>, IPWorksEDIError> 
fn set_signing_cert_store(&self, value : Vec<u8>) ->  Option<IPWorksEDIError> 
fn set_signing_cert_store_ref(&self, value : &[u8]) ->  Option<IPWorksEDIError> 

Default Value

"MY"

Remarks

The signing_cert_store_type property denotes the type of the certificate store specified by signing_cert_store. If the store is password-protected, specify the password in signing_cert_store_password.

signing_cert_store is used in conjunction with the signing_cert_subject property to specify client certificates. If signing_cert_store has a value, and signing_cert_subject or signing_cert_encoded is set, a search for a certificate is initiated. Please see the signing_cert_subject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Vec<u8>

signing_cert_store_password property (AS3Sender Struct)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

fn signing_cert_store_password(&self) -> Result<String, IPWorksEDIError> 
fn set_signing_cert_store_password(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_signing_cert_store_password_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

signing_cert_store_type property (AS3Sender Struct)

The type of certificate store for this certificate.

Syntax

fn signing_cert_store_type(&self) -> Result<i32, IPWorksEDIError> 
fn set_signing_cert_store_type(&self, value : i32) ->  Option<IPWorksEDIError> 

Possible Values

0   // User
1   // Machine
2   // PFXFile
3   // PFXBlob
4   // JKSFile
5   // JKSBlob
6   // PEMKeyFile
7   // PEMKeyBlob
8   // PublicKeyFile
9   // PublicKeyBlob
10   // SSHPublicKeyBlob
11   // P7BFile
12   // P7BBlob
13   // SSHPublicKeyFile
14   // PPKFile
15   // PPKBlob
16   // XMLFile
17   // XMLBlob
18   // JWKFile
19   // JWKBlob
20   // SecurityKey
21   // BCFKSFile
22   // BCFKSBlob
23   // PKCS11
99   // Auto

Default Value

0

Remarks

The struct supports both public and private keys in a variety of formats. When the cstAuto value is used, the struct will automatically determine the type. This property can take one of the following values:

Data Type

i32

signing_cert_subject_alt_names property (AS3Sender Struct)

Comma-separated lists of alternative subject names for the certificate.

Syntax

fn signing_cert_subject_alt_names(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

signing_cert_thumbprint_md5 property (AS3Sender Struct)

The MD5 hash of the certificate.

Syntax

fn signing_cert_thumbprint_md5(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

signing_cert_thumbprint_sha1 property (AS3Sender Struct)

The SHA-1 hash of the certificate.

Syntax

fn signing_cert_thumbprint_sha1(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

signing_cert_thumbprint_sha256 property (AS3Sender Struct)

The SHA-256 hash of the certificate.

Syntax

fn signing_cert_thumbprint_sha256(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

signing_cert_usage property (AS3Sender Struct)

The text description of UsageFlags .

Syntax

fn signing_cert_usage(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

signing_cert_usage_flags property (AS3Sender Struct)

The flags that show intended use for the certificate.

Syntax

fn signing_cert_usage_flags(&self) -> Result<i32, IPWorksEDIError> 

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of signing_cert_usage_flags is a combination of the following flags:

Please see the signing_cert_usage property for a text representation of signing_cert_usage_flags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

i32

signing_cert_version property (AS3Sender Struct)

The certificate's version number.

Syntax

fn signing_cert_version(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

signing_cert_subject property (AS3Sender Struct)

The subject of the certificate used for client authentication.

Syntax

fn signing_cert_subject(&self) -> Result<String, IPWorksEDIError> 
fn set_signing_cert_subject(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_signing_cert_subject_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=example@email.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

signing_cert_encoded property (AS3Sender Struct)

The certificate (PEM/Base64 encoded).

Syntax

fn signing_cert_encoded(&self) -> Result<Vec<u8>, IPWorksEDIError> 
fn set_signing_cert_encoded(&self, value : Vec<u8>) ->  Option<IPWorksEDIError> 
fn set_signing_cert_encoded_ref(&self, value : &[u8]) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The signing_cert_store and signing_cert_subject properties also may be used to specify a certificate.

When signing_cert_encoded is set, a search is initiated in the current signing_cert_store for the private key of the certificate. If the key is found, signing_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, signing_cert_subject is set to an empty string.

Data Type

Vec<u8>

ssl_accept_server_cert_effective_date property (AS3Sender Struct)

The date on which this certificate becomes valid.

Syntax

fn ssl_accept_server_cert_effective_date(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

ssl_accept_server_cert_expiration_date property (AS3Sender Struct)

The date on which the certificate expires.

Syntax

fn ssl_accept_server_cert_expiration_date(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

ssl_accept_server_cert_extended_key_usage property (AS3Sender Struct)

A comma-delimited list of extended key usage identifiers.

Syntax

fn ssl_accept_server_cert_extended_key_usage(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

ssl_accept_server_cert_fingerprint property (AS3Sender Struct)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

fn ssl_accept_server_cert_fingerprint(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

ssl_accept_server_cert_fingerprint_sha1 property (AS3Sender Struct)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

fn ssl_accept_server_cert_fingerprint_sha1(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

ssl_accept_server_cert_fingerprint_sha256 property (AS3Sender Struct)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

fn ssl_accept_server_cert_fingerprint_sha256(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

ssl_accept_server_cert_issuer property (AS3Sender Struct)

The issuer of the certificate.

Syntax

fn ssl_accept_server_cert_issuer(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

ssl_accept_server_cert_private_key property (AS3Sender Struct)

The private key of the certificate (if available).

Syntax

fn ssl_accept_server_cert_private_key(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

NOTE: The ssl_accept_server_cert_private_key may be available but not exportable. In this case, ssl_accept_server_cert_private_key returns an empty string.

This property is read-only.

Data Type

String

ssl_accept_server_cert_private_key_available property (AS3Sender Struct)

Whether a PrivateKey is available for the selected certificate.

Syntax

fn ssl_accept_server_cert_private_key_available(&self) -> Result<bool, IPWorksEDIError> 

Default Value

false

Remarks

Whether a ssl_accept_server_cert_private_key is available for the selected certificate. If ssl_accept_server_cert_private_key_available is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

bool

ssl_accept_server_cert_private_key_container property (AS3Sender Struct)

The name of the PrivateKey container for the certificate (if available).

Syntax

fn ssl_accept_server_cert_private_key_container(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The name of the ssl_accept_server_cert_private_key container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

ssl_accept_server_cert_public_key property (AS3Sender Struct)

The public key of the certificate.

Syntax

fn ssl_accept_server_cert_public_key(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

ssl_accept_server_cert_public_key_algorithm property (AS3Sender Struct)

The textual description of the certificate's public key algorithm.

Syntax

fn ssl_accept_server_cert_public_key_algorithm(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

ssl_accept_server_cert_public_key_length property (AS3Sender Struct)

The length of the certificate's public key (in bits).

Syntax

fn ssl_accept_server_cert_public_key_length(&self) -> Result<i32, IPWorksEDIError> 

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

i32

ssl_accept_server_cert_serial_number property (AS3Sender Struct)

The serial number of the certificate encoded as a string.

Syntax

fn ssl_accept_server_cert_serial_number(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

ssl_accept_server_cert_signature_algorithm property (AS3Sender Struct)

The text description of the certificate's signature algorithm.

Syntax

fn ssl_accept_server_cert_signature_algorithm(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

ssl_accept_server_cert_store property (AS3Sender Struct)

The name of the certificate store for the client certificate.

Syntax

fn ssl_accept_server_cert_store(&self) -> Result<Vec<u8>, IPWorksEDIError> 
fn set_ssl_accept_server_cert_store(&self, value : Vec<u8>) ->  Option<IPWorksEDIError> 
fn set_ssl_accept_server_cert_store_ref(&self, value : &[u8]) ->  Option<IPWorksEDIError> 

Default Value

"MY"

Remarks

The ssl_accept_server_cert_store_type property denotes the type of the certificate store specified by ssl_accept_server_cert_store. If the store is password-protected, specify the password in ssl_accept_server_cert_store_password.

ssl_accept_server_cert_store is used in conjunction with the ssl_accept_server_cert_subject property to specify client certificates. If ssl_accept_server_cert_store has a value, and ssl_accept_server_cert_subject or ssl_accept_server_cert_encoded is set, a search for a certificate is initiated. Please see the ssl_accept_server_cert_subject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Vec<u8>

ssl_accept_server_cert_store_password property (AS3Sender Struct)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

fn ssl_accept_server_cert_store_password(&self) -> Result<String, IPWorksEDIError> 
fn set_ssl_accept_server_cert_store_password(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_ssl_accept_server_cert_store_password_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

ssl_accept_server_cert_store_type property (AS3Sender Struct)

The type of certificate store for this certificate.

Syntax

fn ssl_accept_server_cert_store_type(&self) -> Result<i32, IPWorksEDIError> 
fn set_ssl_accept_server_cert_store_type(&self, value : i32) ->  Option<IPWorksEDIError> 

Possible Values

0   // User
1   // Machine
2   // PFXFile
3   // PFXBlob
4   // JKSFile
5   // JKSBlob
6   // PEMKeyFile
7   // PEMKeyBlob
8   // PublicKeyFile
9   // PublicKeyBlob
10   // SSHPublicKeyBlob
11   // P7BFile
12   // P7BBlob
13   // SSHPublicKeyFile
14   // PPKFile
15   // PPKBlob
16   // XMLFile
17   // XMLBlob
18   // JWKFile
19   // JWKBlob
20   // SecurityKey
21   // BCFKSFile
22   // BCFKSBlob
23   // PKCS11
99   // Auto

Default Value

0

Remarks

The struct supports both public and private keys in a variety of formats. When the cstAuto value is used, the struct will automatically determine the type. This property can take one of the following values:

Data Type

i32

ssl_accept_server_cert_subject_alt_names property (AS3Sender Struct)

Comma-separated lists of alternative subject names for the certificate.

Syntax

fn ssl_accept_server_cert_subject_alt_names(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

ssl_accept_server_cert_thumbprint_md5 property (AS3Sender Struct)

The MD5 hash of the certificate.

Syntax

fn ssl_accept_server_cert_thumbprint_md5(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

ssl_accept_server_cert_thumbprint_sha1 property (AS3Sender Struct)

The SHA-1 hash of the certificate.

Syntax

fn ssl_accept_server_cert_thumbprint_sha1(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

ssl_accept_server_cert_thumbprint_sha256 property (AS3Sender Struct)

The SHA-256 hash of the certificate.

Syntax

fn ssl_accept_server_cert_thumbprint_sha256(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

ssl_accept_server_cert_usage property (AS3Sender Struct)

The text description of UsageFlags .

Syntax

fn ssl_accept_server_cert_usage(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

ssl_accept_server_cert_usage_flags property (AS3Sender Struct)

The flags that show intended use for the certificate.

Syntax

fn ssl_accept_server_cert_usage_flags(&self) -> Result<i32, IPWorksEDIError> 

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of ssl_accept_server_cert_usage_flags is a combination of the following flags:

Please see the ssl_accept_server_cert_usage property for a text representation of ssl_accept_server_cert_usage_flags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

i32

ssl_accept_server_cert_version property (AS3Sender Struct)

The certificate's version number.

Syntax

fn ssl_accept_server_cert_version(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

ssl_accept_server_cert_subject property (AS3Sender Struct)

The subject of the certificate used for client authentication.

Syntax

fn ssl_accept_server_cert_subject(&self) -> Result<String, IPWorksEDIError> 
fn set_ssl_accept_server_cert_subject(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_ssl_accept_server_cert_subject_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=example@email.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

ssl_accept_server_cert_encoded property (AS3Sender Struct)

The certificate (PEM/Base64 encoded).

Syntax

fn ssl_accept_server_cert_encoded(&self) -> Result<Vec<u8>, IPWorksEDIError> 
fn set_ssl_accept_server_cert_encoded(&self, value : Vec<u8>) ->  Option<IPWorksEDIError> 
fn set_ssl_accept_server_cert_encoded_ref(&self, value : &[u8]) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The ssl_accept_server_cert_store and ssl_accept_server_cert_subject properties also may be used to specify a certificate.

When ssl_accept_server_cert_encoded is set, a search is initiated in the current ssl_accept_server_cert_store for the private key of the certificate. If the key is found, ssl_accept_server_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, ssl_accept_server_cert_subject is set to an empty string.

Data Type

Vec<u8>

ssl_cert_effective_date property (AS3Sender Struct)

The date on which this certificate becomes valid.

Syntax

fn ssl_cert_effective_date(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

ssl_cert_expiration_date property (AS3Sender Struct)

The date on which the certificate expires.

Syntax

fn ssl_cert_expiration_date(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

ssl_cert_extended_key_usage property (AS3Sender Struct)

A comma-delimited list of extended key usage identifiers.

Syntax

fn ssl_cert_extended_key_usage(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

ssl_cert_fingerprint property (AS3Sender Struct)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

fn ssl_cert_fingerprint(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

ssl_cert_fingerprint_sha1 property (AS3Sender Struct)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

fn ssl_cert_fingerprint_sha1(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

ssl_cert_fingerprint_sha256 property (AS3Sender Struct)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

fn ssl_cert_fingerprint_sha256(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

ssl_cert_issuer property (AS3Sender Struct)

The issuer of the certificate.

Syntax

fn ssl_cert_issuer(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

ssl_cert_private_key property (AS3Sender Struct)

The private key of the certificate (if available).

Syntax

fn ssl_cert_private_key(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

NOTE: The ssl_cert_private_key may be available but not exportable. In this case, ssl_cert_private_key returns an empty string.

This property is read-only.

Data Type

String

ssl_cert_private_key_available property (AS3Sender Struct)

Whether a PrivateKey is available for the selected certificate.

Syntax

fn ssl_cert_private_key_available(&self) -> Result<bool, IPWorksEDIError> 

Default Value

false

Remarks

Whether a ssl_cert_private_key is available for the selected certificate. If ssl_cert_private_key_available is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

bool

ssl_cert_private_key_container property (AS3Sender Struct)

The name of the PrivateKey container for the certificate (if available).

Syntax

fn ssl_cert_private_key_container(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The name of the ssl_cert_private_key container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

ssl_cert_public_key property (AS3Sender Struct)

The public key of the certificate.

Syntax

fn ssl_cert_public_key(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

ssl_cert_public_key_algorithm property (AS3Sender Struct)

The textual description of the certificate's public key algorithm.

Syntax

fn ssl_cert_public_key_algorithm(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

ssl_cert_public_key_length property (AS3Sender Struct)

The length of the certificate's public key (in bits).

Syntax

fn ssl_cert_public_key_length(&self) -> Result<i32, IPWorksEDIError> 

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

i32

ssl_cert_serial_number property (AS3Sender Struct)

The serial number of the certificate encoded as a string.

Syntax

fn ssl_cert_serial_number(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

ssl_cert_signature_algorithm property (AS3Sender Struct)

The text description of the certificate's signature algorithm.

Syntax

fn ssl_cert_signature_algorithm(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

ssl_cert_store property (AS3Sender Struct)

The name of the certificate store for the client certificate.

Syntax

fn ssl_cert_store(&self) -> Result<Vec<u8>, IPWorksEDIError> 
fn set_ssl_cert_store(&self, value : Vec<u8>) ->  Option<IPWorksEDIError> 
fn set_ssl_cert_store_ref(&self, value : &[u8]) ->  Option<IPWorksEDIError> 

Default Value

"MY"

Remarks

The ssl_cert_store_type property denotes the type of the certificate store specified by ssl_cert_store. If the store is password-protected, specify the password in ssl_cert_store_password.

ssl_cert_store is used in conjunction with the ssl_cert_subject property to specify client certificates. If ssl_cert_store has a value, and ssl_cert_subject or ssl_cert_encoded is set, a search for a certificate is initiated. Please see the ssl_cert_subject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Vec<u8>

ssl_cert_store_password property (AS3Sender Struct)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

fn ssl_cert_store_password(&self) -> Result<String, IPWorksEDIError> 
fn set_ssl_cert_store_password(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_ssl_cert_store_password_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

ssl_cert_store_type property (AS3Sender Struct)

The type of certificate store for this certificate.

Syntax

fn ssl_cert_store_type(&self) -> Result<i32, IPWorksEDIError> 
fn set_ssl_cert_store_type(&self, value : i32) ->  Option<IPWorksEDIError> 

Possible Values

0   // User
1   // Machine
2   // PFXFile
3   // PFXBlob
4   // JKSFile
5   // JKSBlob
6   // PEMKeyFile
7   // PEMKeyBlob
8   // PublicKeyFile
9   // PublicKeyBlob
10   // SSHPublicKeyBlob
11   // P7BFile
12   // P7BBlob
13   // SSHPublicKeyFile
14   // PPKFile
15   // PPKBlob
16   // XMLFile
17   // XMLBlob
18   // JWKFile
19   // JWKBlob
20   // SecurityKey
21   // BCFKSFile
22   // BCFKSBlob
23   // PKCS11
99   // Auto

Default Value

0

Remarks

The struct supports both public and private keys in a variety of formats. When the cstAuto value is used, the struct will automatically determine the type. This property can take one of the following values:

Data Type

i32

ssl_cert_subject_alt_names property (AS3Sender Struct)

Comma-separated lists of alternative subject names for the certificate.

Syntax

fn ssl_cert_subject_alt_names(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

ssl_cert_thumbprint_md5 property (AS3Sender Struct)

The MD5 hash of the certificate.

Syntax

fn ssl_cert_thumbprint_md5(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

ssl_cert_thumbprint_sha1 property (AS3Sender Struct)

The SHA-1 hash of the certificate.

Syntax

fn ssl_cert_thumbprint_sha1(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

ssl_cert_thumbprint_sha256 property (AS3Sender Struct)

The SHA-256 hash of the certificate.

Syntax

fn ssl_cert_thumbprint_sha256(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

ssl_cert_usage property (AS3Sender Struct)

The text description of UsageFlags .

Syntax

fn ssl_cert_usage(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

ssl_cert_usage_flags property (AS3Sender Struct)

The flags that show intended use for the certificate.

Syntax

fn ssl_cert_usage_flags(&self) -> Result<i32, IPWorksEDIError> 

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of ssl_cert_usage_flags is a combination of the following flags:

Please see the ssl_cert_usage property for a text representation of ssl_cert_usage_flags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

i32

ssl_cert_version property (AS3Sender Struct)

The certificate's version number.

Syntax

fn ssl_cert_version(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

ssl_cert_subject property (AS3Sender Struct)

The subject of the certificate used for client authentication.

Syntax

fn ssl_cert_subject(&self) -> Result<String, IPWorksEDIError> 
fn set_ssl_cert_subject(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_ssl_cert_subject_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=example@email.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

ssl_cert_encoded property (AS3Sender Struct)

The certificate (PEM/Base64 encoded).

Syntax

fn ssl_cert_encoded(&self) -> Result<Vec<u8>, IPWorksEDIError> 
fn set_ssl_cert_encoded(&self, value : Vec<u8>) ->  Option<IPWorksEDIError> 
fn set_ssl_cert_encoded_ref(&self, value : &[u8]) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The ssl_cert_store and ssl_cert_subject properties also may be used to specify a certificate.

When ssl_cert_encoded is set, a search is initiated in the current ssl_cert_store for the private key of the certificate. If the key is found, ssl_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, ssl_cert_subject is set to an empty string.

Data Type

Vec<u8>

ssl_provider property (AS3Sender Struct)

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax

fn ssl_provider(&self) -> Result<i32, IPWorksEDIError> 
fn set_ssl_provider(&self, value : i32) ->  Option<IPWorksEDIError> 

Possible Values

0   // Automatic
1   // Platform
2   // Internal

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the struct will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:

In most cases using the default value (Automatic) is recommended. The struct will select a provider depending on the current platform.

When Automatic is selected, on Windows, the struct will use the platform implementation. On Linux/macOS, the struct will use the internal implementation. When TLS 1.3 is enabled via SSLEnabledProtocols, the struct will always try and use the platform implementation. If the platform TLS 1.3 implementation is not available, the internal implementation will be used.

Data Type

i32

ssl_server_cert_effective_date property (AS3Sender Struct)

The date on which this certificate becomes valid.

Syntax

fn ssl_server_cert_effective_date(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

ssl_server_cert_expiration_date property (AS3Sender Struct)

The date on which the certificate expires.

Syntax

fn ssl_server_cert_expiration_date(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

ssl_server_cert_extended_key_usage property (AS3Sender Struct)

A comma-delimited list of extended key usage identifiers.

Syntax

fn ssl_server_cert_extended_key_usage(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

ssl_server_cert_fingerprint property (AS3Sender Struct)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

fn ssl_server_cert_fingerprint(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

ssl_server_cert_fingerprint_sha1 property (AS3Sender Struct)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

fn ssl_server_cert_fingerprint_sha1(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

ssl_server_cert_fingerprint_sha256 property (AS3Sender Struct)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

fn ssl_server_cert_fingerprint_sha256(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

ssl_server_cert_issuer property (AS3Sender Struct)

The issuer of the certificate.

Syntax

fn ssl_server_cert_issuer(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

ssl_server_cert_private_key property (AS3Sender Struct)

The private key of the certificate (if available).

Syntax

fn ssl_server_cert_private_key(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

NOTE: The ssl_server_cert_private_key may be available but not exportable. In this case, ssl_server_cert_private_key returns an empty string.

This property is read-only.

Data Type

String

ssl_server_cert_private_key_available property (AS3Sender Struct)

Whether a PrivateKey is available for the selected certificate.

Syntax

fn ssl_server_cert_private_key_available(&self) -> Result<bool, IPWorksEDIError> 

Default Value

false

Remarks

Whether a ssl_server_cert_private_key is available for the selected certificate. If ssl_server_cert_private_key_available is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

bool

ssl_server_cert_private_key_container property (AS3Sender Struct)

The name of the PrivateKey container for the certificate (if available).

Syntax

fn ssl_server_cert_private_key_container(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The name of the ssl_server_cert_private_key container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

ssl_server_cert_public_key property (AS3Sender Struct)

The public key of the certificate.

Syntax

fn ssl_server_cert_public_key(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

ssl_server_cert_public_key_algorithm property (AS3Sender Struct)

The textual description of the certificate's public key algorithm.

Syntax

fn ssl_server_cert_public_key_algorithm(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

ssl_server_cert_public_key_length property (AS3Sender Struct)

The length of the certificate's public key (in bits).

Syntax

fn ssl_server_cert_public_key_length(&self) -> Result<i32, IPWorksEDIError> 

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

i32

ssl_server_cert_serial_number property (AS3Sender Struct)

The serial number of the certificate encoded as a string.

Syntax

fn ssl_server_cert_serial_number(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

ssl_server_cert_signature_algorithm property (AS3Sender Struct)

The text description of the certificate's signature algorithm.

Syntax

fn ssl_server_cert_signature_algorithm(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

ssl_server_cert_store property (AS3Sender Struct)

The name of the certificate store for the client certificate.

Syntax

fn ssl_server_cert_store(&self) -> Result<Vec<u8>, IPWorksEDIError> 

Default Value

"MY"

Remarks

The ssl_server_cert_store_type property denotes the type of the certificate store specified by ssl_server_cert_store. If the store is password-protected, specify the password in ssl_server_cert_store_password.

ssl_server_cert_store is used in conjunction with the ssl_server_cert_subject property to specify client certificates. If ssl_server_cert_store has a value, and ssl_server_cert_subject or ssl_server_cert_encoded is set, a search for a certificate is initiated. Please see the ssl_server_cert_subject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

This property is read-only.

Data Type

Vec<u8>

ssl_server_cert_store_password property (AS3Sender Struct)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

fn ssl_server_cert_store_password(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

This property is read-only.

Data Type

String

ssl_server_cert_store_type property (AS3Sender Struct)

The type of certificate store for this certificate.

Syntax

fn ssl_server_cert_store_type(&self) -> Result<i32, IPWorksEDIError> 

Possible Values

0   // User
1   // Machine
2   // PFXFile
3   // PFXBlob
4   // JKSFile
5   // JKSBlob
6   // PEMKeyFile
7   // PEMKeyBlob
8   // PublicKeyFile
9   // PublicKeyBlob
10   // SSHPublicKeyBlob
11   // P7BFile
12   // P7BBlob
13   // SSHPublicKeyFile
14   // PPKFile
15   // PPKBlob
16   // XMLFile
17   // XMLBlob
18   // JWKFile
19   // JWKBlob
20   // SecurityKey
21   // BCFKSFile
22   // BCFKSBlob
23   // PKCS11
99   // Auto

Default Value

0

Remarks

The struct supports both public and private keys in a variety of formats. When the cstAuto value is used, the struct will automatically determine the type. This property can take one of the following values:

This property is read-only.

Data Type

i32

ssl_server_cert_subject_alt_names property (AS3Sender Struct)

Comma-separated lists of alternative subject names for the certificate.

Syntax

fn ssl_server_cert_subject_alt_names(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

ssl_server_cert_thumbprint_md5 property (AS3Sender Struct)

The MD5 hash of the certificate.

Syntax

fn ssl_server_cert_thumbprint_md5(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

ssl_server_cert_thumbprint_sha1 property (AS3Sender Struct)

The SHA-1 hash of the certificate.

Syntax

fn ssl_server_cert_thumbprint_sha1(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

ssl_server_cert_thumbprint_sha256 property (AS3Sender Struct)

The SHA-256 hash of the certificate.

Syntax

fn ssl_server_cert_thumbprint_sha256(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

ssl_server_cert_usage property (AS3Sender Struct)

The text description of UsageFlags .

Syntax

fn ssl_server_cert_usage(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

ssl_server_cert_usage_flags property (AS3Sender Struct)

The flags that show intended use for the certificate.

Syntax

fn ssl_server_cert_usage_flags(&self) -> Result<i32, IPWorksEDIError> 

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of ssl_server_cert_usage_flags is a combination of the following flags:

Please see the ssl_server_cert_usage property for a text representation of ssl_server_cert_usage_flags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

i32

ssl_server_cert_version property (AS3Sender Struct)

The certificate's version number.

Syntax

fn ssl_server_cert_version(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

ssl_server_cert_subject property (AS3Sender Struct)

The subject of the certificate used for client authentication.

Syntax

fn ssl_server_cert_subject(&self) -> Result<String, IPWorksEDIError> 

Default Value

""

Remarks

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=example@email.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

This property is read-only.

Data Type

String

ssl_server_cert_encoded property (AS3Sender Struct)

The certificate (PEM/Base64 encoded).

Syntax

fn ssl_server_cert_encoded(&self) -> Result<Vec<u8>, IPWorksEDIError> 

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The ssl_server_cert_store and ssl_server_cert_subject properties also may be used to specify a certificate.

When ssl_server_cert_encoded is set, a search is initiated in the current ssl_server_cert_store for the private key of the certificate. If the key is found, ssl_server_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, ssl_server_cert_subject is set to an empty string.

This property is read-only.

Data Type

Vec<u8>

ssl_start_mode property (AS3Sender Struct)

Determines how the struct starts the SSL negotiation. By default, SSL will not be used.

Syntax

fn ssl_start_mode(&self) -> Result<i32, IPWorksEDIError> 
fn set_ssl_start_mode(&self, value : i32) ->  Option<IPWorksEDIError> 

Possible Values

0   // Automatic
1   // Implicit
2   // Explicit
3   // None

Default Value

3

Remarks

The ssl_start_mode property may have one of the following values:

Data Type

i32

subject property (AS3Sender Struct)

The subject of the message.

Syntax

fn subject(&self) -> Result<String, IPWorksEDIError> 
fn set_subject(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_subject_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

The optional human-readable subject of the message. Some AS2 partners will use this field to send additional information about the transmission at the transport layer.

Data Type

String

timeout property (AS3Sender Struct)

The timeout for the struct.

Syntax

fn timeout(&self) -> Result<i32, IPWorksEDIError> 
fn set_timeout(&self, value : i32) ->  Option<IPWorksEDIError> 

Default Value

60

Remarks

If the timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If timeout is set to a positive value, the struct will wait for the operation to complete before returning control.

The struct will use do_events to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If timeout expires, and the operation is not yet complete, the struct fails with an error.

NOTE: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by timeout seconds when any amount of data is successfully sent or received.

The default value for the timeout property is 60 seconds.

Data Type

i32

user property (AS3Sender Struct)

This property contains the user identifier to use to log in.

Syntax

fn user(&self) -> Result<String, IPWorksEDIError> 
fn set_user(&self, value : &str) ->  Option<IPWorksEDIError> 
fn set_user_ref(&self, value : &String) ->  Option<IPWorksEDIError> 

Default Value

""

Remarks

This property contains the user identifier to be used when logging in. It must be set before the struct connects to the FTP server.

Data Type

String

abort method (AS3Sender Struct)

The method aborts the current upload or download.

Syntax

fn abort(&self) -> Result<(), IPWorksEDIError>

Remarks

This method sends an ABOR command to the FTP server. It is used to interrupt file uploads and downloads.

change_remote_path method (AS3Sender Struct)

This method changes the current path on the FTP server.

Syntax

fn change_remote_path(&self, remote_path : &str) -> Result<(), IPWorksEDIError>

Remarks

This method changes the current path on the FTP server to the specified remote_path. When called, the struct will issue a command to the server to change the directory. The remote_path parameter may hold an absolute or relative path.

Absolute Paths

If the path begins with a /, it is considered an absolute path and must specify the entire path from the root of the server. For instance:

component.ChangeRemotePath("/home/testuser/myfolder");

Relative Paths

If the path does not begin with a /, it is considered a relative path and is resolved in relation to the current directory. For instance, a value of myfolder will indicate a subfolder of the current directory. The special value .. refers to the parent directory of the current path. For instance:

//Change to the 'myfolder' sub-directory component.ChangeRemotePath("myfolder"); //Navigate up two levels and then into the 'another/folder' path. component.ChangeRemotePath("../../another/folder");

config method (AS3Sender Struct)

Sets or retrieves a configuration setting.

Syntax

fn config(&self, configuration_string : &str) -> Result<String, IPWorksEDIError>

Remarks

config is a generic method available in every struct. It is used to set and retrieve configuration settings for the struct.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the struct, access to these internal properties is provided through the config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

delete_file method (AS3Sender Struct)

This method removes a file specified by FileName from an FTP server.

Syntax

fn delete_file(&self, file_name : &str) -> Result<(), IPWorksEDIError>

Remarks

This method is used to remove a file specified by file_name from an FTP server. The remote file or directory specified by file_name is deleted. file_name is either an absolute path on the server, or a path relative to remote path set by change_remote_path. If no FTP session is in place, one is automatically created by first calling the logon method.

get_file_size method (AS3Sender Struct)

Gets the size of a file on the FTP server.

Syntax

fn get_file_size(&self, file_name : &str) -> Result<(), IPWorksEDIError>

Remarks

Gets the size of the file specified by FileName and remote_path on the FTP server.

get_file_time method (AS3Sender Struct)

Gets the last modification time of a file on the FTP server.

Syntax

fn get_file_time(&self, file_name : &str) -> Result<(), IPWorksEDIError>

Remarks

Gets the last modification time of the file specified by FileName and remote_path on the FTP server.

list_directory method (AS3Sender Struct)

List the current directory on an FTP server.

Syntax

fn list_directory(&self, files_to_list : &str) -> Result<(), IPWorksEDIError>

Remarks

A listing is requested for the directory or file mask specified in FilesToList. This can be an absolute path on the server, a path relative to remote_path, or a file mask. The file listing is received through the on_dir_list event.

Similar to list_directory_long, except only file names are returned. If no FTP session is in place, one is automatically created by first calling the logon method.

list_directory_long method (AS3Sender Struct)

List the current directory on an FTP server.

Syntax

fn list_directory_long(&self, files_to_list : &str) -> Result<(), IPWorksEDIError>

Remarks

A listing is requested for the directory or file mask specified in FilesToList. This can be an absolute path on the server, a path relative to remote_path, or a file mask. The file listing is received through the on_dir_list event. Extended file information is returned.

If no FTP session is in place, one is automatically created by first calling the logon method.

logoff method (AS3Sender Struct)

This method is used to log off from the FTP server by posting a QUIT command.

Syntax

fn logoff(&self) -> Result<(), IPWorksEDIError>

Remarks

This method is used to log off from the FTP server by posting a QUIT command. If that fails, the connection is terminated by the local host.

logon method (AS3Sender Struct)

Logon to the FTP RemoteHost using the current User and Password .

Syntax

fn logon(&self) -> Result<(), IPWorksEDIError>

Remarks

Logon to the FTP server using the current user and password. If an SSL (TLS) connection is required, you should first set ssl_start_mode.

Example (Logging On)

FTPControl.RemoteHost = "ftpserver" FTPControl.User = "username" FTPControl.Password = "password" FTPControl.Logon()

query_remote_path method (AS3Sender Struct)

This queries the server for the current path.

Syntax

fn query_remote_path(&self) -> Result<String, IPWorksEDIError>

Remarks

This method queries the server for the current path. When called, the struct will issue a command to the server to retrieve the current path value. The return value of this method is the path returned by the server. For instance:

string remotePath = component.QueryRemotePath();

read_receipt method (AS3Sender Struct)

Reads and parses (but does not verify) an MDN receipt.

Syntax

fn read_receipt(&self, file_name : &str) -> Result<(), IPWorksEDIError>

Remarks

read_receipt will retrieve the file specified by FileName from the FTP server, and attempt to parse it as an MDN receipt. If the file is a valid MDN receipt, the struct will determine the originator of the receipt and the message_id of the original message. The originator of the receipt will be stored in as3_to, the intended recipient (presumably your system) will be stored in as3_from, and the original message Id will be stored in message_id.

Pass in an empty string to skip the FTP transfer, and process the receipt specified by the mdn_receipt property instead.

You should then look up the original message and set original_content_mic to the value of original_content_mic originally computed when the message was sent (you will need to save this information externally). You should also set recipient_cert based on the value of as3_to if necessary. Also, set mdn_options to the value used when making the original request.

Finally, verify_receipt should be used to verify the receipt.

reset method (AS3Sender Struct)

Resets the state of the control.

Syntax

fn reset(&self) -> Result<(), IPWorksEDIError>

Remarks

Reset resets the state of the struct. All properties will be set to their default values.

send method (AS3Sender Struct)

Prepares and sends the AS3 message.

Syntax

fn send(&self, file_name : &str) -> Result<(), IPWorksEDIError>

Remarks

Invoking send will prepare and send the AS3 message. It will be signed if signing_cert is set, encrypted if recipient_cert is set, and compressed if compression_format is set. A receipt will be requested if mdn_to is set.

Prior to sending, you may logon to the FTP server and navigate to the desired remote_path. If you have not created an FTP connection already then send will attempt to establish one.

FileName should contain the name of the file that will be written on the AS3/FTP server. You may leave FileName blank to allow the struct to determine an appropriate name.

send_ftp_command method (AS3Sender Struct)

Sends the exact command directly to the server.

Syntax

fn send_ftp_command(&self, command : &str) -> Result<(), IPWorksEDIError>

Remarks

This method sends the command specified by Command to the server exactly as it is provided. Use this method to send additional or custom commands directly to the server.

After calling this method check the ftp_last_reply property and/or monitor the on_pi_trail event to obtain the server's response.

verify_receipt method (AS3Sender Struct)

Verifies an MDN receipt.

Syntax

fn verify_receipt(&self) -> Result<(), IPWorksEDIError>

Remarks

VerifyReceipt verifies the receipt in mdn_receipt against the values of original_content_mic and message_id and the preferences specified in mdn_options. The method operates similarly to post: After the method finishes, the mdn_receipt, ReceiptSigningProtocol, and receipt_signer_cert properties will be populated with the appropriate values.

The method operates synchronously, and will throw an exception if any errors or warnings occur. Errors might include a failure to decrypt or authenticate the receipt, the absence of an MDN when one was requested, TCP/IP errors, or any errors reported by the server in the MDN. Warnings might include the return of an unsigned receipt when a signed receipt was requested, or other warnings reported by the server in the MDN.

If an exception is thrown the error code will correspond to the severity of the warning or error, allowing client software to determine whether or not to accept the reply. If multiple errors occur, the exception will return a special error code, and the error message will contain a line for each error's code and description; i.e. "423: Failed to authenticate sender". If the error(s) is/are not fatal processing will not be interrupted, and the relevant properties will be populated as normal.

You should first invoke read_receipt when it is not known which message the receipt is in response to. This will allow you to determine the original message_id and originator of the receipt before trying to verify it.

on_connection_status event (AS3Sender Struct)

Fired to indicate changes in the connection state.

Syntax

// AS3SenderConnectionStatusEventArgs carries the AS3Sender ConnectionStatus event's parameters.
pub struct AS3SenderConnectionStatusEventArgs {
  fn connection_event(&self) -> &String
  fn status_code(&self) -> i32
  fn description(&self) -> &String
}

// AS3SenderConnectionStatusEvent defines the signature of the AS3Sender ConnectionStatus event's handler function.
pub trait AS3SenderConnectionStatusEvent {
  fn on_connection_status(&self, sender : AS3Sender, e : &mut AS3SenderConnectionStatusEventArgs);
}

impl <'a> AS3Sender<'a> {
  pub fn on_connection_status(&self) -> &'a dyn AS3SenderConnectionStatusEvent;
  pub fn set_on_connection_status(&mut self, value : &'a dyn AS3SenderConnectionStatusEvent);
  ...
}

Remarks

This event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The connection_event parameter indicates the type of connection event. Values may include the following:

on_dir_list event (AS3Sender Struct)

This event is fired when a directory entry is received.

Syntax

// AS3SenderDirListEventArgs carries the AS3Sender DirList event's parameters.
pub struct AS3SenderDirListEventArgs {
  fn dir_entry(&self) -> &String
  fn file_name(&self) -> &String
  fn is_dir(&self) -> bool
  fn file_size(&self) -> i64
  fn file_time(&self) -> &String
}

// AS3SenderDirListEvent defines the signature of the AS3Sender DirList event's handler function.
pub trait AS3SenderDirListEvent {
  fn on_dir_list(&self, sender : AS3Sender, e : &mut AS3SenderDirListEventArgs);
}

impl <'a> AS3Sender<'a> {
  pub fn on_dir_list(&self) -> &'a dyn AS3SenderDirListEvent;
  pub fn set_on_dir_list(&mut self, value : &'a dyn AS3SenderDirListEvent);
  ...
}

Remarks

The on_dir_list events are fired when a directory listing is received as a response to a list_directory or list_directory_long call.

The on_start_transfer and on_end_transfer events mark the beginning and end of the event stream.

The dir_entry parameter contains the filename when list_directory is called and includes extended file information when list_directory_long is called.

The struct tries to fill out the file_name, is_dir, file_size, and file_time parameters when calling the list_directory_long method. Except for file_name, these parameters are empty when a short "List Directory" is performed.

In Unix systems, the date is given in two types of formats: If the date is in the past 12 months the exact time is specified and the year is omitted. Otherwise, only the date and the year, but not hours or minutes, are given.

on_end_transfer event (AS3Sender Struct)

This event is fired when a file finishes downloading or uploading.

Syntax

// AS3SenderEndTransferEventArgs carries the AS3Sender EndTransfer event's parameters.
pub struct AS3SenderEndTransferEventArgs {
  fn direction(&self) -> i32
}

// AS3SenderEndTransferEvent defines the signature of the AS3Sender EndTransfer event's handler function.
pub trait AS3SenderEndTransferEvent {
  fn on_end_transfer(&self, sender : AS3Sender, e : &mut AS3SenderEndTransferEventArgs);
}

impl <'a> AS3Sender<'a> {
  pub fn on_end_transfer(&self) -> &'a dyn AS3SenderEndTransferEvent;
  pub fn set_on_end_transfer(&mut self, value : &'a dyn AS3SenderEndTransferEvent);
  ...
}

Remarks

The on_end_transfer event fires when a Data Interface connection is closed. This occurs when the file finishes transferring or a directory listing is finished.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

on_error event (AS3Sender Struct)

Fired when information is available about errors during data delivery.

Syntax

// AS3SenderErrorEventArgs carries the AS3Sender Error event's parameters.
pub struct AS3SenderErrorEventArgs {
  fn error_code(&self) -> i32
  fn description(&self) -> &String
}

// AS3SenderErrorEvent defines the signature of the AS3Sender Error event's handler function.
pub trait AS3SenderErrorEvent {
  fn on_error(&self, sender : AS3Sender, e : &mut AS3SenderErrorEventArgs);
}

impl <'a> AS3Sender<'a> {
  pub fn on_error(&self) -> &'a dyn AS3SenderErrorEvent;
  pub fn set_on_error(&mut self, value : &'a dyn AS3SenderErrorEvent);
  ...
}

Remarks

The on_error event is fired in case of exceptional conditions during message processing. Normally the struct fails with an error.

The error_code parameter contains an error code, and the description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

on_log event (AS3Sender Struct)

Fired with log information while processing a message.

Syntax

// AS3SenderLogEventArgs carries the AS3Sender Log event's parameters.
pub struct AS3SenderLogEventArgs {
  fn log_type(&self) -> &String
  fn log_message(&self) -> &[u8]
}

// AS3SenderLogEvent defines the signature of the AS3Sender Log event's handler function.
pub trait AS3SenderLogEvent {
  fn on_log(&self, sender : AS3Sender, e : &mut AS3SenderLogEventArgs);
}

impl <'a> AS3Sender<'a> {
  pub fn on_log(&self) -> &'a dyn AS3SenderLogEvent;
  pub fn set_on_log(&mut self, value : &'a dyn AS3SenderLogEvent);
  ...
}

Remarks

This event fires once for each log message generated by the struct. The verbosity is controlled by the LogLevel setting.

Log messages available through this event correspond to log files written to log_directory. This event provides a way to obtain log messages without relying on files on disk. This event fires regardless of the value of log_directory (i.e. when log_directory is empty the event will still fire).

The LogMessage event parameter holds the raw log data.

The LogType event parameter indicates the type of log. Possible values are:

on_pi_trail event (AS3Sender Struct)

This event traces the commands sent to the server, and the respective replies.

Syntax

// AS3SenderPITrailEventArgs carries the AS3Sender PITrail event's parameters.
pub struct AS3SenderPITrailEventArgs {
  fn direction(&self) -> i32
  fn message(&self) -> &String
}

// AS3SenderPITrailEvent defines the signature of the AS3Sender PITrail event's handler function.
pub trait AS3SenderPITrailEvent {
  fn on_pi_trail(&self, sender : AS3Sender, e : &mut AS3SenderPITrailEventArgs);
}

impl <'a> AS3Sender<'a> {
  pub fn on_pi_trail(&self) -> &'a dyn AS3SenderPITrailEvent;
  pub fn set_on_pi_trail(&mut self, value : &'a dyn AS3SenderPITrailEvent);
  ...
}

Remarks

The on_pi_trail event is useful for debugging purposes. It shows all of the interactions between the client and the server, line by line.

The message parameter contains the full text of the message. The direction parameter shows the originator of the message:

on_ssl_server_authentication event (AS3Sender Struct)

Fired after the server presents its certificate to the client.

Syntax

// AS3SenderSSLServerAuthenticationEventArgs carries the AS3Sender SSLServerAuthentication event's parameters.
pub struct AS3SenderSSLServerAuthenticationEventArgs {
  fn cert_encoded(&self) -> &[u8]
  fn cert_subject(&self) -> &String
  fn cert_issuer(&self) -> &String
  fn status(&self) -> &String
  fn accept(&self) -> bool
  fn set_accept(&self, value : bool)
}

// AS3SenderSSLServerAuthenticationEvent defines the signature of the AS3Sender SSLServerAuthentication event's handler function.
pub trait AS3SenderSSLServerAuthenticationEvent {
  fn on_ssl_server_authentication(&self, sender : AS3Sender, e : &mut AS3SenderSSLServerAuthenticationEventArgs);
}

impl <'a> AS3Sender<'a> {
  pub fn on_ssl_server_authentication(&self) -> &'a dyn AS3SenderSSLServerAuthenticationEvent;
  pub fn set_on_ssl_server_authentication(&mut self, value : &'a dyn AS3SenderSSLServerAuthenticationEvent);
  ...
}

Remarks

During this event, the client can decide whether or not to continue with the connection process. The accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When accept is False, status shows why the verification failed (otherwise, status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the accept parameter to True.

on_ssl_status event (AS3Sender Struct)

Fired when secure connection progress messages are available.

Syntax

// AS3SenderSSLStatusEventArgs carries the AS3Sender SSLStatus event's parameters.
pub struct AS3SenderSSLStatusEventArgs {
  fn message(&self) -> &String
}

// AS3SenderSSLStatusEvent defines the signature of the AS3Sender SSLStatus event's handler function.
pub trait AS3SenderSSLStatusEvent {
  fn on_ssl_status(&self, sender : AS3Sender, e : &mut AS3SenderSSLStatusEventArgs);
}

impl <'a> AS3Sender<'a> {
  pub fn on_ssl_status(&self) -> &'a dyn AS3SenderSSLStatusEvent;
  pub fn set_on_ssl_status(&mut self, value : &'a dyn AS3SenderSSLStatusEvent);
  ...
}

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

on_start_transfer event (AS3Sender Struct)

This event fires when a file starts downloading or uploading.

Syntax

// AS3SenderStartTransferEventArgs carries the AS3Sender StartTransfer event's parameters.
pub struct AS3SenderStartTransferEventArgs {
  fn direction(&self) -> i32
}

// AS3SenderStartTransferEvent defines the signature of the AS3Sender StartTransfer event's handler function.
pub trait AS3SenderStartTransferEvent {
  fn on_start_transfer(&self, sender : AS3Sender, e : &mut AS3SenderStartTransferEventArgs);
}

impl <'a> AS3Sender<'a> {
  pub fn on_start_transfer(&self) -> &'a dyn AS3SenderStartTransferEvent;
  pub fn set_on_start_transfer(&mut self, value : &'a dyn AS3SenderStartTransferEvent);
  ...
}

Remarks

The on_start_transfer event fires when a Data Interface connection is created. This is when the file starts transferring or a directory listing is started.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

on_transfer event (AS3Sender Struct)

This event is fired during the file download or upload.

Syntax

// AS3SenderTransferEventArgs carries the AS3Sender Transfer event's parameters.
pub struct AS3SenderTransferEventArgs {
  fn direction(&self) -> i32
  fn bytes_transferred(&self) -> i64
  fn percent_done(&self) -> i32
  fn text(&self) -> &[u8]
}

// AS3SenderTransferEvent defines the signature of the AS3Sender Transfer event's handler function.
pub trait AS3SenderTransferEvent {
  fn on_transfer(&self, sender : AS3Sender, e : &mut AS3SenderTransferEventArgs);
}

impl <'a> AS3Sender<'a> {
  pub fn on_transfer(&self) -> &'a dyn AS3SenderTransferEvent;
  pub fn set_on_transfer(&mut self, value : &'a dyn AS3SenderTransferEvent);
  ...
}

Remarks

One or more on_transfer events are fired during file transfer. The bytes_transferred parameter shows the number of bytes transferred since the beginning of the transfer.

text contains the portion of the file data being delivered.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

NOTE: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Config Settings (AS3Sender Struct)

AS3Sender Config Settings

FTP Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----