TRADACOMSValidator Component

Properties Methods Events Config Settings Errors

TRADACOMSValidator is a lightweight EDI validation component designed for simple document validation.

Syntax

nsoftware.IPWorksEDITranslator.Tradacomsvalidator

Remarks

This component provides a simple way to validate an EDI document and obtain details about any validation errors.

EDI Validation

Before calling Validate set SchemaFormat and call LoadSchema to load the schema for the document to be validated. The schema defines many validation rules such as minimum and maximum lengths, minimum and maximum occurrences, and more. The validation performed by the component depends largely on the schema's definition.

When the Validate method is called the component will attempt to validate the document. If errors are found during validation the ValidationError event will fire with details about each error as it is encountered. After the document has been validated the ValidationErrors property will be populated with details of each error.

Inspect the ValidationErrors property for information on any errors that were encountered.

Validation Example validator.InputFile = "files/EDIDocuments/MyEDIDoc.txt"; validator.LoadSchema("my_schemas/00501/RSSBus_005010X222A1_837.json"); validator.Validate(); foreach (ValidationErrorDetail error in validator.ValidationErrors) { Console.WriteLine(error.ErrorCode + ": " + error.Message); }

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.


EDIStandardVersion	The version of the EDI specification.
InputData	The data to parse.
InputFile	The file to parse.
SchemaFormat	The format of the schema file.
ValidationErrors	Collection of validation errors for the current document.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.


CompileSchema	Compiles an existing XSD schema into an optimized binary representation.
Config	Sets or retrieves a configuration setting.
DisplaySchemaInfo	Returns a string showing the structure of the schema defining the document.
DisplayXMLInfo	Returns a string showing the structure of the parsed document as XML.
Flush	Flushes the parser and checks its end state.
LoadSchema	Loads a schema file describing a Transaction Set.
LoadSchemaStream	Loads a schema stream describing a Transaction Set.
Reset	Resets the parser.
SetInputStream	Sets the stream from which the component will read the data to parse.
Validate	Validates the specified EDI document.

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.


EndFunctionalGroup	Fires whenever a control segment is read that marks the end of an interchange.
EndInterchange	Fires whenever a control segment is read that marks the end of an interchange.
EndLoop	Fires when the end of a loop is detected in a transaction set.
EndTransaction	Fires whenever a control segment is read that marks the end of a transaction.
Error	Fired when information is available about errors during data delivery.
ResolveSchema	Fires whenever a new transaction set is encountered and no schema is found for it.
Segment	Fires whenever a data segment in a transaction set is read.
StartFunctionalGroup	Fires whenever a control segment is read that marks the start of a functional group.
StartInterchange	Fires whenever a control segment is read that marks the start of an interchange.
StartLoop	Fires when the starting of a loop is detected in a transaction set.
StartTransaction	Fires whenever a control segment is read that marks the start of a transaction.
ValidationError	Fires whenever a validation error is encountered.

Config Settings

The following is a list of config settings for the component with short descriptions. Click on the links for further details.


CacheJSONSchemas	Whether to cache JSON schemas.
ClearSchemaCache	Clears the cached JSON schemas.
ComponentDelimiter	The delimiter separating components.
CrossFieldValidationEnabled	Enables cross-field validation rules.
EDIStandard	The document format.
ElementDelimiter	The delimiter character separating data elements.
Encoding	The character encoding to be applied when reading and writing data.
ExtraData	Extra data that has not been parsed by the component.
HasXPath	Determines if the specified XPath exists.
MaxValidationErrors	The maximum number of errors to save in the ValidationErrors property.
ReleaseChar	The character used to escape delimiters within values.
ResolveXPathOnSet	Determines whether or not the XPath is resolved when set.
SegmentDelimiter	The delimiter character separating segments within the EDI document.
StrictSchemaValidation	Specifies the behavior during schema validation.
BuildInfo	Information about the product's build.
GUIAvailable	Whether or not a message loop is available for processing events.
LicenseInfo	Information about the current license.
MaskSensitive	Whether sensitive data is masked in log messages.
UseFIPSCompliantAPI	Tells the component whether or not to use FIPS certified APIs.
UseInternalSecurityAPI	Whether or not to use the system security libraries or an internal implementation.

EDIStandardVersion Property (TRADACOMSValidator Component)

The version of the EDI specification.

public string EDIStandardVersion { get; }

Public ReadOnly Property EDIStandardVersion As String

Default Value

Remarks

This property will be populated after parsing begins and the correct version string for is located via the schema, such as 004010 for X12.

This property is read-only and not available at design time.

InputData Property (TRADACOMSValidator Component)

The data to parse.

Syntax

C#
VB.NET

public string InputData { get; set; }

Public Property InputData As String

Default Value

Remarks

This property specifies the data to be parsed.

Input Properties

The component will determine the source of the input based on which properties are set.

The order in which the input properties are checked is as follows:

SetInputStream
InputFile
InputData

When a valid source is found the search stops.

InputFile Property (TRADACOMSValidator Component)

The file to parse.

Syntax

C#
VB.NET

public string InputFile { get; set; }

Public Property InputFile As String

Default Value

Remarks

This property specifies the file to be processed. Set this property to the full or relative path to the file which will be processed.

Input Properties

The component will determine the source of the input based on which properties are set.

The order in which the input properties are checked is as follows:

SetInputStream
InputFile
InputData

When a valid source is found the search stops.

This property is not available at design time.

SchemaFormat Property (TRADACOMSValidator Component)

The format of the schema file.

Syntax

C#
VB.NET

public TradacomsvalidatorSchemaFormats SchemaFormat { get; set; }

enum TradacomsvalidatorSchemaFormats {
  schemaAutomatic,
  schemaBinary,
  schemaBizTalk,
  schemaSEF,
  schemaBOTS,
  schemaAltova,
  schemaJSON
}

Public Property SchemaFormat As TradacomsvalidatorSchemaFormats

Enum TradacomsvalidatorSchemaFormats
  schemaAutomatic
  schemaBinary
  schemaBizTalk
  schemaSEF
  schemaBOTS
  schemaAltova
  schemaJSON
End Enum

Default Value

Remarks

Set SchemaFormat before calling the LoadSchema method to specify the loading schema format.

The following schema formats are supported:


0 (schemaAutomatic - default)	The schema type is automatically determined based on file extension.
1 (schemaBinary)	A binary schema that was previously compiled by calling CompileSchema.
2 (schemaBizTalk)	BizTalk (XSD): http://msdn.microsoft.com/en-us/library/aa559426(v=BTS.70).aspx
3 (schemaSEF)	TIBCO Standard Exchange Format (SEF): https://docs.tibco.com/products/tibco-foresight-edisim-6-18-0
5 (schemaAltova)	Altova: http://www.altova.com/
6 (schemaJSON)	JSON

ValidationErrors Property (TRADACOMSValidator Component)

Collection of validation errors for the current document.

Syntax

C#
VB.NET

public ValidationErrorDetailList ValidationErrors { get; }

Public ReadOnly Property ValidationErrors As ValidationErrorDetailList

Remarks

After calling Validate this property contains details of any validation errors. Validation errors are also accessible through the ValidationError event as the document is validated.

This property is read-only and not available at design time.

Please refer to the ValidationErrorDetail type for a complete list of fields.

CompileSchema Method (TRADACOMSValidator Component)

Compiles an existing XSD schema into an optimized binary representation.

Syntax

C#
VB.NET

public void CompileSchema(string xsdSchema, string binSchema);

Async Version
public async Task CompileSchema(string xsdSchema, string binSchema);
public async Task CompileSchema(string xsdSchema, string binSchema, CancellationToken cancellationToken);

Public Sub CompileSchema(ByVal XsdSchema As String, ByVal BinSchema As String)

Async Version
Public Sub CompileSchema(ByVal XsdSchema As String, ByVal BinSchema As String) As Task
Public Sub CompileSchema(ByVal XsdSchema As String, ByVal BinSchema As String, cancellationToken As CancellationToken) As Task

Remarks

This method parses XsdSchema and generates an optimized binary representation that is saved into the path referenced by BinSchema. Binary schemas are smaller and require less resources when loading later using LoadSchema

If the schema file does not exists or cannot be parsed as an EDI schema, the component throws an exception.

Config Method (TRADACOMSValidator Component)

Sets or retrieves a configuration setting.

Syntax

C#
VB.NET

public string Config(string configurationString);

Async Version
public async Task<string> Config(string configurationString);
public async Task<string> Config(string configurationString, CancellationToken cancellationToken);

Public Function Config(ByVal ConfigurationString As String) As String

Async Version
Public Function Config(ByVal ConfigurationString As String) As Task(Of String)
Public Function Config(ByVal ConfigurationString As String, cancellationToken As CancellationToken) As Task(Of String)

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DisplaySchemaInfo Method (TRADACOMSValidator Component)

Returns a string showing the structure of the schema defining the document.

Syntax

C#
VB.NET

public string DisplaySchemaInfo();

Async Version
public async Task<string> DisplaySchemaInfo();
public async Task<string> DisplaySchemaInfo(CancellationToken cancellationToken);

Public Function DisplaySchemaInfo() As String

Async Version
Public Function DisplaySchemaInfo() As Task(Of String)
Public Function DisplaySchemaInfo(cancellationToken As CancellationToken) As Task(Of String)

Remarks

After calling LoadSchema this may be called to obtain information about the structure of the schema defining the document. If the desired XPath is not known this helps determine the structure so that the correct XPath can be built.

Note: A valid schema must be loaded via LoadSchema.

For instance: Console.WriteLine(component.DisplaySchemaInfo()); Will output text like:

UNH[0,1]
  BGM[0,1]
  DTM[0,35]
  PAI[0,1]
  ALI[0,5]
  IMD[0,1]
  FTX[0,10]
  LOC[0,10]
  GIS[0,10]
  DGS[0,1]
  RFFLoop1[0,99]
    RFF[0,1]
    DTM_2[0,5]
    GIR[0,5]
    LOC_2[0,2]
    MEA[0,5]
    QTY[0,2]
    FTX_2[0,5]
    MOA[0,2]
  NADLoop1[0,99]
    NAD[0,1]
    LOC_3[0,25]
    FII[0,5]
    RFFLoop2[0,9999]
      RFF_2[0,1]
      DTM_3[0,5]
    DOCLoop1[0,5]
      DOC[0,1]
      DTM_4[0,5]
    CTALoop1[0,5]
      CTA[0,1]
      COM[0,5]
  TAXLoop1[0,5]
    TAX[0,1]
    MOA_2[0,1]
    LOC_4[0,5]
  CUXLoop1[0,5]
    CUX[0,1]
    DTM_5[0,5]
  PATLoop1[0,10]
    PAT[0,1]
    DTM_6[0,5]
    PCD[0,1]
    MOA_3[0,1]
    PAI_2[0,1]
    FII_2[0,1]
  TDTLoop1[0,10]
    TDT[0,1]
    TSR[0,1]
    LOCLoop1[0,10]
      LOC_5[0,1]
      DTM_7[0,5]
    RFFLoop3[0,9999]
      RFF_3[0,1]
      DTM_8[0,5]
  TODLoop1[0,5]
    TOD[0,1]
    LOC_6[0,2]
  PACLoop1[0,1000]
    PAC[0,1]
    MEA_2[0,5]
    EQD[0,1]
    PCILoop1[0,5]
      PCI[0,1]
      RFF_4[0,1]
      DTM_9[0,5]
      GIN[0,5]
  ALCLoop1[0,9999]
    ALC[0,1]
    ALI_2[0,5]
    FTX_3[0,1]
    RFFLoop4[0,5]
      RFF_5[0,1]
      DTM_10[0,5]
    QTYLoop1[0,1]
      QTY_2[0,1]
      RNG[0,1]
    PCDLoop1[0,1]
      PCD_2[0,1]
      RNG_2[0,1]
    MOALoop1[0,2]
      MOA_4[0,1]
      RNG_3[0,1]
      CUX_2[0,1]
      DTM_11[0,1]
    RTELoop1[0,1]
      RTE[0,1]
      RNG_4[0,1]
    TAXLoop2[0,5]
      TAX_2[0,1]
      MOA_5[0,1]
  RCSLoop1[0,100]
    RCS[0,1]
    RFF_6[0,5]
    DTM_12[0,5]
    FTX_4[0,5]
  AJTLoop1[0,1]
    AJT[0,1]
    FTX_5[0,5]
  INPLoop1[0,1]
    INP[0,1]
    FTX_6[0,5]
  LINLoop1[0,9999999]
    LIN[0,1]
    PIA[0,25]
    IMD_2[0,10]
    MEA_3[0,5]
    QTY_3[0,5]
    PCD_3[0,1]
    ALI_3[0,5]
    DTM_13[0,35]
    GIN_2[0,1000]
    GIR_2[0,1000]
    QVR[0,1]
    EQD_2[0,1]
    FTX_7[0,5]
    DGS_2[0,1]
    MOALoop2[0,10]
      MOA_6[0,1]
      CUX_3[0,1]
    PATLoop2[0,10]
      PAT_2[0,1]
      DTM_14[0,5]
      PCD_4[0,1]
      MOA_7[0,1]
    PRILoop1[0,25]
      PRI[0,1]
      CUX_4[0,1]
      APR[0,1]
      RNG_5[0,1]
      DTM_15[0,5]
    RFFLoop5[0,10]
      RFF_7[0,1]
      DTM_16[0,5]
    PACLoop2[0,10]
      PAC_2[0,1]
      MEA_4[0,10]
      EQD_3[0,1]
      PCILoop2[0,10]
        PCI_2[0,1]
        RFF_8[0,1]
        DTM_17[0,5]
        GIN_3[0,10]
    LOCLoop2[0,9999]
      LOC_7[0,1]
      QTY_4[0,100]
      DTM_18[0,5]
    TAXLoop3[0,99]
      TAX_3[0,1]
      MOA_8[0,1]
      LOC_8[0,5]
    NADLoop2[0,99]
      NAD_2[0,1]
      LOC_9[0,5]
      RFFLoop6[0,5]
        RFF_9[0,1]
        DTM_19[0,5]
      DOCLoop2[0,5]
        DOC_2[0,1]
        DTM_20[0,5]
      CTALoop2[0,5]
        CTA_2[0,1]
        COM_2[0,5]
    ALCLoop2[0,30]
      ALC_2[0,1]
      ALI_4[0,5]
      DTM_21[0,5]
      FTX_8[0,1]
      QTYLoop2[0,1]
        QTY_5[0,1]
        RNG_6[0,1]
      PCDLoop2[0,1]
        PCD_5[0,1]
        RNG_7[0,1]
      MOALoop3[0,2]
        MOA_9[0,1]
        RNG_8[0,1]
        CUX_5[0,1]
        DTM_22[0,1]
      RTELoop2[0,1]
        RTE_2[0,1]
        RNG_9[0,1]
      TAXLoop4[0,5]
        TAX_4[0,1]
        MOA_10[0,1]
    TDTLoop2[0,10]
      TDT_2[0,1]
      LOCLoop3[0,10]
        LOC_10[0,1]
        DTM_23[0,5]
    TODLoop2[0,5]
      TOD_2[0,1]
      LOC_11[0,2]
    RCSLoop2[0,100]
      RCS_2[0,1]
      RFF_10[0,5]
      DTM_24[0,5]
      FTX_9[0,5]
    GISLoop1[0,10]
      GIS_2[0,1]
      RFF_11[0,1]
      DTM_25[0,5]
      GIR_3[0,5]
      LOC_12[0,2]
      MEA_5[0,5]
      QTY_6[0,2]
      FTX_10[0,5]
      MOA_11[0,2]
  UNS[0,1]
  CNT[0,10]
  MOALoop4[0,100]
    MOA_12[0,1]
    RFFLoop7[0,1]
      RFF_12[0,1]
      DTM_26[0,5]
  TAXLoop5[0,10]
    TAX_5[0,1]
    MOA_13[0,2]
  ALCLoop3[0,15]
    ALC_3[0,1]
    ALI_5[0,1]
    MOA_14[0,2]
    FTX_11[0,1]
  UNT[0,1]

DisplayXMLInfo Method (TRADACOMSValidator Component)

Returns a string showing the structure of the parsed document as XML.

Syntax

C#
VB.NET

public string DisplayXMLInfo();

Async Version
public async Task<string> DisplayXMLInfo();
public async Task<string> DisplayXMLInfo(CancellationToken cancellationToken);

Public Function DisplayXMLInfo() As String

Async Version
Public Function DisplayXMLInfo() As Task(Of String)
Public Function DisplayXMLInfo(cancellationToken As CancellationToken) As Task(Of String)

Remarks

After the EDI document has been parsed this method may be called to obtain information about the document structure. The parsed data is represented as XML when queried. This shows all parsed data and may be useful for testing and debugging purposes. For instance: Console.WriteLine(component.DisplayXMLInfo()); Will output text like:

<IX tag="UNB" UNB1="UNOB:1" UNB2="WAYNE_TECH" UNB3="ACME" UNB4="160707:1547" UNB5="000000002" UNB6="" UNB7="1234" UNB8="" UNB9="" UNB10="" UNB11="1">
  <TX tag="UNH" UNH1="509010117" UNH2="INVOIC:D:97A:UN">
    <BGM tag="BGM" BGM01="380:::TAX INVOICE" BGM02="0013550417" BGM03="9"/>
    <DTM tag="DTM" DTM01="3:20070926:102"/>
    <DTM tag="DTM" DTM01="4:20061123:102"/>
    <FTX tag="FTX" FTX01="AAI" FTX02="1"/>
    <TAXLoop1>
      <TAX tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::10072.14" TAX06="S"/>
    </TAXLoop1>
    <CUXLoop1>
      <CUX tag="CUX" CUX01="2:EUR:4" CUX02="" CUX03="0.67529"/>
    </CUXLoop1>
    <PATLoop1>
      <PAT tag="PAT" PAT01="1"/>
      <DTM_6 tag="DTM" DTM01="10:20070926:102"/>
      <PCD tag="PCD" PCD01="2:0:13"/>
    </PATLoop1>
    <LINLoop1>
      <LIN tag="LIN" LIN01="000030" LIN02=""/>
      <PIA tag="PIA" PIA01="1" PIA02="2265S13:BP::92"/>
      <PIA tag="PIA" PIA01="1" PIA02="5029766832002:UP::92"/>
      <IMD_2 tag="IMD" IMD01="F" IMD02=""/>
      <QTY_3 tag="QTY" QTY01="47:50.000:EA"/>
      <DTM_13 tag="DTM" DTM01="11:20070926:102"/>
      <MOALoop2>
        <MOA_6 tag="MOA" MOA01="203:19150.00"/>
      </MOALoop2>
      <PRILoop1>
        <PRI tag="PRI" PRI01="INV:383.00:TU"/>
      </PRILoop1>
      <TAXLoop3>
        <TAX_3 tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::17.500" TAX06="S"/>
        <MOA_8 tag="MOA" MOA01="125:19150.45"/>
      </TAXLoop3>
      <ALCLoop2>
        <ALC_2 tag="ALC" ALC01="C" ALC02="0.45" ALC03="" ALC04="" ALC05="FC"/>
        <MOALoop3>
          <MOA_9 tag="MOA" MOA01="8:0.45"/>
        </MOALoop3>
      </ALCLoop2>
    </LINLoop1>
    <LINLoop1>
      <LIN tag="LIN" LIN01="000040" LIN02=""/>
      <PIA tag="PIA" PIA01="1" PIA02="2269F22:BP::92"/>
      <PIA tag="PIA" PIA01="1" PIA02="5051254078241:UP::92"/>
      <IMD_2 tag="IMD" IMD01="F" IMD02=""/>
      <QTY_3 tag="QTY" QTY01="47:20.000:EA"/>
      <DTM_13 tag="DTM" DTM01="11:20070926:102"/>
      <MOALoop2>
        <MOA_6 tag="MOA" MOA01="203:21060.00"/>
      </MOALoop2>
      <PRILoop1>
        <PRI tag="PRI" PRI01="INV:1053.00:TU"/>
      </PRILoop1>
      <TAXLoop3>
        <TAX_3 tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::17.500" TAX06="S"/>
        <MOA_8 tag="MOA" MOA01="125:21060.50"/>
      </TAXLoop3>
      <ALCLoop2>
        <ALC_2 tag="ALC" ALC01="C" ALC02="0.50" ALC03="" ALC04="" ALC05="FC"/>
        <MOALoop3>
          <MOA_9 tag="MOA" MOA01="8:0.50"/>
        </MOALoop3>
      </ALCLoop2>
    </LINLoop1>
    <LINLoop1>
      <LIN tag="LIN" LIN01="000170" LIN02=""/>
      <PIA tag="PIA" PIA01="1" PIA02="2269F10:BP::92"/>
      <PIA tag="PIA" PIA01="1" PIA02="5051254078326:UP::92"/>
      <IMD_2 tag="IMD" IMD01="F" IMD02=""/>
      <QTY_3 tag="QTY" QTY01="47:10.000:EA"/>
      <DTM_13 tag="DTM" DTM01="11:20070926:102"/>
      <MOALoop2>
        <MOA_6 tag="MOA" MOA01="203:6950.00"/>
      </MOALoop2>
      <PRILoop1>
        <PRI tag="PRI" PRI01="INV:695.00:TU"/>
      </PRILoop1>
      <TAXLoop3>
        <TAX_3 tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::17.500" TAX06="S"/>
        <MOA_8 tag="MOA" MOA01="125:6950.16"/>
      </TAXLoop3>
      <ALCLoop2>
        <ALC_2 tag="ALC" ALC01="C" ALC02="0.16" ALC03="" ALC04="" ALC05="FC"/>
        <MOALoop3>
          <MOA_9 tag="MOA" MOA01="8:0.16"/>
        </MOALoop3>
      </ALCLoop2>
    </LINLoop1>
    <LINLoop1>
      <LIN tag="LIN" LIN01="000190" LIN02=""/>
      <PIA tag="PIA" PIA01="1" PIA02="2269F26:BP::92"/>
      <PIA tag="PIA" PIA01="1" PIA02="5051254051190:UP::92"/>
      <IMD_2 tag="IMD" IMD01="F" IMD02=""/>
      <QTY_3 tag="QTY" QTY01="47:5.000:EA"/>
      <DTM_13 tag="DTM" DTM01="11:20070926:102"/>
      <MOALoop2>
        <MOA_6 tag="MOA" MOA01="203:2375.00"/>
      </MOALoop2>
      <PRILoop1>
        <PRI tag="PRI" PRI01="INV:475.00:TU"/>
      </PRILoop1>
      <TAXLoop3>
        <TAX_3 tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::17.500" TAX06="S"/>
        <MOA_8 tag="MOA" MOA01="125:2375.06"/>
      </TAXLoop3>
      <ALCLoop2>
        <ALC_2 tag="ALC" ALC01="C" ALC02="0.06" ALC03="" ALC04="" ALC05="FC"/>
        <MOALoop3>
          <MOA_9 tag="MOA" MOA01="8:0.06"/>
        </MOALoop3>
      </ALCLoop2>
    </LINLoop1>
    <LINLoop1>
      <LIN tag="LIN" LIN01="000200" LIN02=""/>
      <PIA tag="PIA" PIA01="1" PIA02="2265S24:BP::92"/>
      <PIA tag="PIA" PIA01="1" PIA02="5029766000685:UP::92"/>
      <IMD_2 tag="IMD" IMD01="F" IMD02=""/>
      <QTY_3 tag="QTY" QTY01="47:3.000:EA"/>
      <DTM_13 tag="DTM" DTM01="11:20070926:102"/>
      <MOALoop2>
        <MOA_6 tag="MOA" MOA01="203:957.00"/>
      </MOALoop2>
      <PRILoop1>
        <PRI tag="PRI" PRI01="INV:319.00:TU"/>
      </PRILoop1>
      <TAXLoop3>
        <TAX_3 tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::17.500" TAX06="S"/>
        <MOA_8 tag="MOA" MOA01="125:957.02"/>
      </TAXLoop3>
      <ALCLoop2>
        <ALC_2 tag="ALC" ALC01="C" ALC02="0.02" ALC03="" ALC04="" ALC05="FC"/>
        <MOALoop3>
          <MOA_9 tag="MOA" MOA01="8:0.02"/>
        </MOALoop3>
      </ALCLoop2>
    </LINLoop1>
    <LINLoop1>
      <LIN tag="LIN" LIN01="000210" LIN02=""/>
      <PIA tag="PIA" PIA01="1" PIA02="2263T95:BP::92"/>
      <PIA tag="PIA" PIA01="1" PIA02="5029766699575:UP::92"/>
      <IMD_2 tag="IMD" IMD01="F" IMD02=""/>
      <QTY_3 tag="QTY" QTY01="47:3.000:EA"/>
      <DTM_13 tag="DTM" DTM01="11:20070926:102"/>
      <MOALoop2>
        <MOA_6 tag="MOA" MOA01="203:2085.00"/>
      </MOALoop2>
      <PRILoop1>
        <PRI tag="PRI" PRI01="INV:695.00:TU"/>
      </PRILoop1>
      <TAXLoop3>
        <TAX_3 tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::17.500" TAX06="S"/>
        <MOA_8 tag="MOA" MOA01="125:2085.05"/>
      </TAXLoop3>
      <ALCLoop2>
        <ALC_2 tag="ALC" ALC01="C" ALC02="0.05" ALC03="" ALC04="" ALC05="FC"/>
        <MOALoop3>
          <MOA_9 tag="MOA" MOA01="8:0.05"/>
        </MOALoop3>
      </ALCLoop2>
    </LINLoop1>
    <LINLoop1>
      <LIN tag="LIN" LIN01="000250" LIN02=""/>
      <PIA tag="PIA" PIA01="1" PIA02="2269F15:BP::92"/>
      <PIA tag="PIA" PIA01="1" PIA02="5051254080091:UP::92"/>
      <IMD_2 tag="IMD" IMD01="F" IMD02=""/>
      <QTY_3 tag="QTY" QTY01="47:3.000:EA"/>
      <DTM_13 tag="DTM" DTM01="11:20070926:102"/>
      <MOALoop2>
        <MOA_6 tag="MOA" MOA01="203:4977.00"/>
      </MOALoop2>
      <PRILoop1>
        <PRI tag="PRI" PRI01="INV:1659.00:TU"/>
      </PRILoop1>
      <TAXLoop3>
        <TAX_3 tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::17.500" TAX06="S"/>
        <MOA_8 tag="MOA" MOA01="125:4977.12"/>
      </TAXLoop3>
      <ALCLoop2>
        <ALC_2 tag="ALC" ALC01="C" ALC02="0.12" ALC03="" ALC04="" ALC05="FC"/>
        <MOALoop3>
          <MOA_9 tag="MOA" MOA01="8:0.12"/>
        </MOALoop3>
      </ALCLoop2>
    </LINLoop1>
    <UNS tag="UNS" UNS01="S"/>
    <CNT tag="CNT" CNT01="4:7"/>
    <MOALoop4>
      <MOA_12 tag="MOA" MOA01="9:67627.50"/>
    </MOALoop4>
    <MOALoop4>
      <MOA_12 tag="MOA" MOA01="79:57554.00"/>
    </MOALoop4>
    <TAXLoop5>
      <TAX_5 tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::17.500" TAX06="S"/>
      <MOA_13 tag="MOA" MOA01="125:57555.36:EUR:3"/>
      <MOA_13 tag="MOA" MOA01="124:10072.14:EUR:3"/>
    </TAXLoop5>
    <ALCLoop3>
      <ALC_3 tag="ALC" ALC01="C" ALC02="1.36" ALC03="" ALC04="" ALC05="FC"/>
      <MOA_14 tag="MOA" MOA01="8:1.36"/>
    </ALCLoop3>
  </TX>
</IX>

Flush Method (TRADACOMSValidator Component)

Flushes the parser and checks its end state.

Syntax

C#
VB.NET

public void Flush();

Async Version
public async Task Flush();
public async Task Flush(CancellationToken cancellationToken);

Public Sub Flush()

Async Version
Public Sub Flush() As Task
Public Sub Flush(cancellationToken As CancellationToken) As Task

Remarks

When Flush is called, the parser flushes all its buffers, firing events as necessary, and then checks its end state.

Any extra un-parsed data will be populated in the ExtraData property after this method is called.

LoadSchema Method (TRADACOMSValidator Component)

Loads a schema file describing a Transaction Set.

Syntax

C#
VB.NET

public void LoadSchema(string fileName);

Async Version
public async Task LoadSchema(string fileName);
public async Task LoadSchema(string fileName, CancellationToken cancellationToken);

Public Sub LoadSchema(ByVal FileName As String)

Async Version
Public Sub LoadSchema(ByVal FileName As String) As Task
Public Sub LoadSchema(ByVal FileName As String, cancellationToken As CancellationToken) As Task

Remarks

This method parses the File and loads it into an internal schema list. The component will attempt to automatically detect the SchemaFormat.

If the schema file does not exist or cannot be parsed as an EDI schema, the component throws an exception.

LoadSchemaStream Method (TRADACOMSValidator Component)

Loads a schema stream describing a Transaction Set.

Syntax

C#
VB.NET

public void LoadSchemaStream(System.IO.Stream schemaStream);

Async Version
public async Task LoadSchemaStream(System.IO.Stream schemaStream);
public async Task LoadSchemaStream(System.IO.Stream schemaStream, CancellationToken cancellationToken);

Public Sub LoadSchemaStream(ByVal SchemaStream As System.IO.Stream)

Async Version
Public Sub LoadSchemaStream(ByVal SchemaStream As System.IO.Stream) As Task
Public Sub LoadSchemaStream(ByVal SchemaStream As System.IO.Stream, cancellationToken As CancellationToken) As Task

Remarks

Parses Stream and loads it into an internal schema list. The SchemaFormat property must be set before calling this method.

The following SchemaFormat values are supported when calling this method:

schemaBinary
schemaBizTalk
schemaSEF

All other schema formats are unsupported when using this method. LoadSchema may be used if an unsupported schema format is required.

Reset Method (TRADACOMSValidator Component)

Resets the parser.

Syntax

C#
VB.NET

public void Reset();

Async Version
public async Task Reset();
public async Task Reset(CancellationToken cancellationToken);

Public Sub Reset()

Async Version
Public Sub Reset() As Task
Public Sub Reset(cancellationToken As CancellationToken) As Task

Remarks

When called, the parser flushes all its buffers, firing events as necessary, and then initializes itself to its default state.

Reset must also be used as signal to the parser that the current stream of text has terminated.

SetInputStream Method (TRADACOMSValidator Component)

Sets the stream from which the component will read the data to parse.

Syntax

C#
VB.NET

public void SetInputStream(System.IO.Stream inputStream);

Async Version
public async Task SetInputStream(System.IO.Stream inputStream);
public async Task SetInputStream(System.IO.Stream inputStream, CancellationToken cancellationToken);

Public Sub SetInputStream(ByVal InputStream As System.IO.Stream)

Async Version
Public Sub SetInputStream(ByVal InputStream As System.IO.Stream) As Task
Public Sub SetInputStream(ByVal InputStream As System.IO.Stream, cancellationToken As CancellationToken) As Task

Remarks

This method sets the stream from which the component will read the data to parse.

Input Properties

The component will determine the source of the input based on which properties are set.

The order in which the input properties are checked is as follows:

SetInputStream
InputFile
InputData

When a valid source is found the search stops.

Validate Method (TRADACOMSValidator Component)

Validates the specified EDI document.

Syntax

C#
VB.NET

public void Validate();

Async Version
public async Task Validate();
public async Task Validate(CancellationToken cancellationToken);

Public Sub Validate()

Async Version
Public Sub Validate() As Task
Public Sub Validate(cancellationToken As CancellationToken) As Task

Remarks

This method validates the EDI document specified by InputFile, SetInputStream or InputData.

Inspect the ValidationErrors property for information on any errors that were encountered.

EndFunctionalGroup Event (TRADACOMSValidator Component)

Fires whenever a control segment is read that marks the end of an interchange.

Syntax

C#
VB.NET

public event OnEndFunctionalGroupHandler OnEndFunctionalGroup;

public delegate void OnEndFunctionalGroupHandler(object sender, TradacomsvalidatorEndFunctionalGroupEventArgs e);

public class TradacomsvalidatorEndFunctionalGroupEventArgs : EventArgs {
  public string Tag { get; }
  public string ControlNumber { get; }
  public int Count { get; }
  public string FullSegment { get; }
}

Public Event OnEndFunctionalGroup As OnEndFunctionalGroupHandler

Public Delegate Sub OnEndFunctionalGroupHandler(sender As Object, e As TradacomsvalidatorEndFunctionalGroupEventArgs)

Public Class TradacomsvalidatorEndFunctionalGroupEventArgs Inherits EventArgs
  Public ReadOnly Property Tag As String
  Public ReadOnly Property ControlNumber As String
  Public ReadOnly Property Count As Integer
  Public ReadOnly Property FullSegment As String
End Class

Remarks

The EndFunctionalGroup event will fire when a control segment marking the end of a functional group is read. The Tag parameter contains the tag of the segment, such as GE. ControlNumber contains the control number associated with the segment, and links this event with the corresponding StartFunctionalGroup event. Count contains the value of the count element included in the closing segment, which identifies the number of transactions in a functional group.

EndInterchange Event (TRADACOMSValidator Component)

Fires whenever a control segment is read that marks the end of an interchange.

Syntax

C#
VB.NET

public event OnEndInterchangeHandler OnEndInterchange;

public delegate void OnEndInterchangeHandler(object sender, TradacomsvalidatorEndInterchangeEventArgs e);

public class TradacomsvalidatorEndInterchangeEventArgs : EventArgs {
  public string Tag { get; }
  public string ControlNumber { get; }
  public string FullSegment { get; }
}

Public Event OnEndInterchange As OnEndInterchangeHandler

Public Delegate Sub OnEndInterchangeHandler(sender As Object, e As TradacomsvalidatorEndInterchangeEventArgs)

Public Class TradacomsvalidatorEndInterchangeEventArgs Inherits EventArgs
  Public ReadOnly Property Tag As String
  Public ReadOnly Property ControlNumber As String
  Public ReadOnly Property FullSegment As String
End Class

Remarks

The EndInterchange event will fire when a control segment marking the end of an interchange is read. The Tag parameter contains the tag of the segment, such as IEA. ControlNumber contains the control number associated with the segment, and links this event with the corresponding StartInterchange event.

EndLoop Event (TRADACOMSValidator Component)

Fires when the end of a loop is detected in a transaction set.

Syntax

C#
VB.NET

public event OnEndLoopHandler OnEndLoop;

public delegate void OnEndLoopHandler(object sender, TradacomsvalidatorEndLoopEventArgs e);

public class TradacomsvalidatorEndLoopEventArgs : EventArgs {
}

Public Event OnEndLoop As OnEndLoopHandler

Public Delegate Sub OnEndLoopHandler(sender As Object, e As TradacomsvalidatorEndLoopEventArgs)

Public Class TradacomsvalidatorEndLoopEventArgs Inherits EventArgs
End Class

Remarks

The EndLoop event will fire after the last segment in a loop is read. Each EndLoop event is paired with one StartLoop event.

EndTransaction Event (TRADACOMSValidator Component)

Fires whenever a control segment is read that marks the end of a transaction.

Syntax

C#
VB.NET

public event OnEndTransactionHandler OnEndTransaction;

public delegate void OnEndTransactionHandler(object sender, TradacomsvalidatorEndTransactionEventArgs e);

public class TradacomsvalidatorEndTransactionEventArgs : EventArgs {
  public string Tag { get; }
  public string ControlNumber { get; }
  public int Count { get; }
  public string FullSegment { get; }
}

Public Event OnEndTransaction As OnEndTransactionHandler

Public Delegate Sub OnEndTransactionHandler(sender As Object, e As TradacomsvalidatorEndTransactionEventArgs)

Public Class TradacomsvalidatorEndTransactionEventArgs Inherits EventArgs
  Public ReadOnly Property Tag As String
  Public ReadOnly Property ControlNumber As String
  Public ReadOnly Property Count As Integer
  Public ReadOnly Property FullSegment As String
End Class

Remarks

The EndTransaction event will fire when a control segment marking the end of a transaction is read. The Tag parameter contains the tag of the segment, such as SE. ControlNumber contains the control number associated with the segment, and links this event with the corresponding StartTransaction event. Count contains the value of the count element included in the closing segment, which identifies the number of segments in a transaction set.

Error Event (TRADACOMSValidator Component)

Fired when information is available about errors during data delivery.

Syntax

C#
VB.NET

public event OnErrorHandler OnError;

public delegate void OnErrorHandler(object sender, TradacomsvalidatorErrorEventArgs e);

public class TradacomsvalidatorErrorEventArgs : EventArgs {
  public int ErrorCode { get; }
  public string Description { get; }
}

Public Event OnError As OnErrorHandler

Public Delegate Sub OnErrorHandler(sender As Object, e As TradacomsvalidatorErrorEventArgs)

Public Class TradacomsvalidatorErrorEventArgs Inherits EventArgs
  Public ReadOnly Property ErrorCode As Integer
  Public ReadOnly Property Description As String
End Class

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component throws an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

The Error event is fired in case of exceptional conditions during message processing. Normally the component throws an exception.

ResolveSchema Event (TRADACOMSValidator Component)

Fires whenever a new transaction set is encountered and no schema is found for it.

Syntax

C#
VB.NET

public event OnResolveSchemaHandler OnResolveSchema;

public delegate void OnResolveSchemaHandler(object sender, TradacomsvalidatorResolveSchemaEventArgs e);

public class TradacomsvalidatorResolveSchemaEventArgs : EventArgs {
  public string TransactionCode { get; }
  public string StandardVersion { get; }
}

Public Event OnResolveSchema As OnResolveSchemaHandler

Public Delegate Sub OnResolveSchemaHandler(sender As Object, e As TradacomsvalidatorResolveSchemaEventArgs)

Public Class TradacomsvalidatorResolveSchemaEventArgs Inherits EventArgs
  Public ReadOnly Property TransactionCode As String
  Public ReadOnly Property StandardVersion As String
End Class

Remarks

The ResolveSchema event will fire when a the component encounters the header segment of a new transaction set, but it finds no schema corresponding to it already loaded.

TransactionCode contains the code of the transaction, such as "810" or "APERAK".

StandardVersion contains the version of the transaction, such as "004010" or "D95A".

When processing this event, the caller can use LoadSchema() to load a new schema into the component that can be used to parse the transaction.

After the event fires, if the component still doesn't have a matching schema, then it will attempt schema-less parsing of the transaction set.

Segment Event (TRADACOMSValidator Component)

Fires whenever a data segment in a transaction set is read.

Syntax

C#
VB.NET

public event OnSegmentHandler OnSegment;

public delegate void OnSegmentHandler(object sender, TradacomsvalidatorSegmentEventArgs e);

public class TradacomsvalidatorSegmentEventArgs : EventArgs {
  public string Tag { get; }
  public string Name { get; }
  public string LoopName { get; }
  public string FullSegment { get; }
}

Public Event OnSegment As OnSegmentHandler

Public Delegate Sub OnSegmentHandler(sender As Object, e As TradacomsvalidatorSegmentEventArgs)

Public Class TradacomsvalidatorSegmentEventArgs Inherits EventArgs
  Public ReadOnly Property Tag As String
  Public ReadOnly Property Name As String
  Public ReadOnly Property LoopName As String
  Public ReadOnly Property FullSegment As String
End Class

Remarks

The Segment event will fire when a data segment is read. The Tag parameter contains the tag of the segment. Name contains the name of the segment as defined in the associated transaction set schema. LoopName contains the name of the loop or group this segment is present in (such as N1Loop1).

StartFunctionalGroup Event (TRADACOMSValidator Component)

Fires whenever a control segment is read that marks the start of a functional group.

Syntax

C#
VB.NET

public event OnStartFunctionalGroupHandler OnStartFunctionalGroup;

public delegate void OnStartFunctionalGroupHandler(object sender, TradacomsvalidatorStartFunctionalGroupEventArgs e);

public class TradacomsvalidatorStartFunctionalGroupEventArgs : EventArgs {
  public string Tag { get; }
  public string ControlNumber { get; }
  public string FullSegment { get; }
}

Public Event OnStartFunctionalGroup As OnStartFunctionalGroupHandler

Public Delegate Sub OnStartFunctionalGroupHandler(sender As Object, e As TradacomsvalidatorStartFunctionalGroupEventArgs)

Public Class TradacomsvalidatorStartFunctionalGroupEventArgs Inherits EventArgs
  Public ReadOnly Property Tag As String
  Public ReadOnly Property ControlNumber As String
  Public ReadOnly Property FullSegment As String
End Class

Remarks

The StartFunctionalGroup event will fire when a control segment marking the start of a functional group structure is read. The Tag parameter contains the tag of the segment, such as GS. ControlNumber contains the control number associated with the segment.

StartInterchange Event (TRADACOMSValidator Component)

Fires whenever a control segment is read that marks the start of an interchange.

Syntax

C#
VB.NET

public event OnStartInterchangeHandler OnStartInterchange;

public delegate void OnStartInterchangeHandler(object sender, TradacomsvalidatorStartInterchangeEventArgs e);

public class TradacomsvalidatorStartInterchangeEventArgs : EventArgs {
  public string Tag { get; }
  public string ControlNumber { get; }
  public string FullSegment { get; }
}

Public Event OnStartInterchange As OnStartInterchangeHandler

Public Delegate Sub OnStartInterchangeHandler(sender As Object, e As TradacomsvalidatorStartInterchangeEventArgs)

Public Class TradacomsvalidatorStartInterchangeEventArgs Inherits EventArgs
  Public ReadOnly Property Tag As String
  Public ReadOnly Property ControlNumber As String
  Public ReadOnly Property FullSegment As String
End Class

Remarks

The StartInterchange event will fire when a control segment marking the start of an interchange structure is read. The Tag parameter contains the tag of the segment, such as ISA. ControlNumber contains the control number associated with the segment.

StartLoop Event (TRADACOMSValidator Component)

Fires when the starting of a loop is detected in a transaction set.

Syntax

C#
VB.NET

public event OnStartLoopHandler OnStartLoop;

public delegate void OnStartLoopHandler(object sender, TradacomsvalidatorStartLoopEventArgs e);

public class TradacomsvalidatorStartLoopEventArgs : EventArgs {
  public string Name { get; }
}

Public Event OnStartLoop As OnStartLoopHandler

Public Delegate Sub OnStartLoopHandler(sender As Object, e As TradacomsvalidatorStartLoopEventArgs)

Public Class TradacomsvalidatorStartLoopEventArgs Inherits EventArgs
  Public ReadOnly Property Name As String
End Class

Remarks

The StartLoop event will fire when the tag of a loop trigger segment is read. The Name parameter contains the schema-provided name of the loop, such as "N1Loop1".

StartTransaction Event (TRADACOMSValidator Component)

Fires whenever a control segment is read that marks the start of a transaction.

Syntax

C#
VB.NET

public event OnStartTransactionHandler OnStartTransaction;

public delegate void OnStartTransactionHandler(object sender, TradacomsvalidatorStartTransactionEventArgs e);

public class TradacomsvalidatorStartTransactionEventArgs : EventArgs {
  public string Tag { get; }
  public string ControlNumber { get; }
  public string Code { get; }
  public string FullSegment { get; }
}

Public Event OnStartTransaction As OnStartTransactionHandler

Public Delegate Sub OnStartTransactionHandler(sender As Object, e As TradacomsvalidatorStartTransactionEventArgs)

Public Class TradacomsvalidatorStartTransactionEventArgs Inherits EventArgs
  Public ReadOnly Property Tag As String
  Public ReadOnly Property ControlNumber As String
  Public ReadOnly Property Code As String
  Public ReadOnly Property FullSegment As String
End Class

Remarks

The StartTransaction event will fire when a control segment marking the start of a transaction is read. The Tag parameter contains the tag of the segment, such as ST. ControlNumber contains the control number associated with the segment. Code contains the transaction code (such as 810).

ValidationError Event (TRADACOMSValidator Component)

Fires whenever a validation error is encountered.

Syntax

C#
VB.NET

public event OnValidationErrorHandler OnValidationError;

public delegate void OnValidationErrorHandler(object sender, TradacomsvalidatorValidationErrorEventArgs e);

public class TradacomsvalidatorValidationErrorEventArgs : EventArgs {
  public int ErrorCode { get; }
  public string Message { get; }
  public int SegmentNumber { get; }
  public string SegmentTag { get; }
  public string TechnicalErrorCode { get; }
  public string SegmentErrorCode { get; }
  public string ElementErrorCode { get; }
  public int ElementPosition { get; }
  public int Line { get; }
  public int Column { get; }
}

Public Event OnValidationError As OnValidationErrorHandler

Public Delegate Sub OnValidationErrorHandler(sender As Object, e As TradacomsvalidatorValidationErrorEventArgs)

Public Class TradacomsvalidatorValidationErrorEventArgs Inherits EventArgs
  Public ReadOnly Property ErrorCode As Integer
  Public ReadOnly Property Message As String
  Public ReadOnly Property SegmentNumber As Integer
  Public ReadOnly Property SegmentTag As String
  Public ReadOnly Property TechnicalErrorCode As String
  Public ReadOnly Property SegmentErrorCode As String
  Public ReadOnly Property ElementErrorCode As String
  Public ReadOnly Property ElementPosition As Integer
  Public ReadOnly Property Line As Integer
  Public ReadOnly Property Column As Integer
End Class

Remarks

This event will fire with errors as the EDI document is validated. The ErrorCode parameter contains the type of error encountered. Message is a textual description of the problem. SegmentNumber is the index of the segment where the problem was found. SegmentTag holds the tag name of the segment. ElementPosition is the position of the element where the error occurred.

The Line and Column parameters identify the location within the EDI document where the error occurred.

Possible ErrorCode values are:


0	The component is not required but is present.
1	Invalid segment count.
2	Invalid transaction count.
3	Invalid group count.
4	Invalid interchange control number.
5	Invalid group control number.
6	Invalid transaction control number.
10	A required data element is missing.
11	Invalid field length.
12	Invalid field value.
13	A required component is missing.
14	The data element is not defined but is present.
30	Required segment is missing.
31	Required loop is missing.
32	Occurrences exceeds the schema defined limit.
33	Occurrences is less than the schema defined minimum.
40	Paired rule validation failed, the pair of elements must be present.
41	At least one of element is required, see message for list of elements.
42	Exclusion validation failed, only one of the elements can be present.
43	Conditional rule validation failed.
44	List conditional rule validation failed.
45	First then none validation failed. The presence of an element requires that other specific elements must not be present.
46	Only one or none of the elements can be present.

X12 Specific Parameters

The following parameters are available in all validator components but are only applicable to X12 document validation at this time.

SegmentErrorCode holds the error code that may be used in the IK304 field of a 999. ElementErrorCode holds the error code that may be used in the IK403 field of a 999.

TechnicalErrorCode holds a technical error code that helps identify structural issues with the document. For instance when parsing an X12 document this will hold values that may be used for TA1 error codes. When parsing X12 documents the following codes are applicable:


001	The Interchange Control Numbers in the header ISA 13 and trailer IEA02 do not match.
014	Invalid interchange date value (non-numeric characters or wrong length).
015	Invalid interchange time value (non-numeric characters or wrong length).
022	The ISA segment is missing elements (invalid control structure).
024	Invalid interchange content (e.g., Invalid GS segment).

ValidationErrorDetail Type

Details of the validation error.

Remarks

After Validate is called the ValidationErrors property is populated with details of each error that was encountered. Examine the fields for specific information on the type of error encountered.

Fields

Column
int (read-only)
Default Value: 0

The column number in the EDI document where the error occurred. This value may be used in conjunction with the Line field to determine the exact location within the EDI document where the error occurred.

ElementErrorCode
string (read-only)
Default Value: ""

The error code which may be used in the IK403 field of a 999.

Note: This field is specific to X12 documents and is not applicable to other document types.

ElementPosition
int (read-only)
Default Value: 0

This field holds the position of the element where the error occurred.

ErrorCode
int (read-only)
Default Value: 0

The ErrorCode field contains the type of error encountered. Possible values are:


0	The component is not required but is present.
1	Invalid segment count.
2	Invalid transaction count.
3	Invalid group count.
4	Invalid interchange control number.
5	Invalid group control number.
6	Invalid transaction control number.
10	A required data element is missing.
11	Invalid field length.
12	Invalid field value.
13	A required component is missing.
14	The data element is not defined but is present.
30	Required segment is missing.
31	Required loop is missing.
32	Occurrences exceeds the schema defined limit.
33	Occurrences is less than the schema defined minimum.
40	Paired rule validation failed, the pair of elements must be present.
41	At least one of element is required, see message for list of elements.
42	Exclusion validation failed, only one of the elements can be present.
43	Conditional rule validation failed.
44	List conditional rule validation failed.
45	First then none validation failed. The presence of an element requires that other specific elements must not be present.
46	Only one or none of the elements can be present.

Line
int (read-only)
Default Value: 0

The line number in the EDI document where the error occurred. This value may be used in conjunction with the Column field to determine the exact location within the EDI document where the error occurred.

Message
string (read-only)
Default Value: ""

Message is a textual description of the error.

SegmentErrorCode
string (read-only)
Default Value: ""

The error code which may be used in the IK304 field of a 999.

Note: This field is specific to X12 documents and is not applicable to other document types.

SegmentNumber
int (read-only)
Default Value: 0

This field is the index of the segment where the error occurred.

SegmentTag
string (read-only)
Default Value: ""

This field specifies the tag name of the segment where the error occurred.

TechnicalErrorCode
string (read-only)
Default Value: ""

This field holds a technical error code that helps identify structural issues with the document. For instance when parsing an X12 document this will hold values that may be used for TA1 error codes.

Note: This field is specific to X12 documents and is not applicable to other document types.

Possible values are:


001	The Interchange Control Numbers in the header ISA 13 and trailer IEA02 do not match.
014	Invalid interchange date value (non-numeric characters or wrong length).
015	Invalid interchange time value (non-numeric characters or wrong length).
022	The ISA segment is missing elements (invalid control structure).
024	Invalid interchange content (e.g., Invalid GS segment).

Config Settings (TRADACOMSValidator Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

TRADACOMSValidator Config Settings

CacheJSONSchemas: Whether to cache JSON schemas.

This setting specifies whether JSON schemas will be cached once parsed. If set to True the component will cache parsed data into an internal static variable which is accessible from other instances of the component.

This is useful in situations where separate instances of the component may be parsing similar data. Setting this to True can help reduce memory usage and increase parsing speed in situations where multiple component instances are being used at the same time with the same schema files. The default value is False.

When set to False the schema cache is cleared.

ClearSchemaCache: Clears the cached JSON schemas.

This setting may be queried to clear the cache of previously parsed JSON schemas. This is only applicable when CacheJSONSchemas is True. This is called in the following manner:

component.Config("ClearSchemaCache");

ComponentDelimiter: The delimiter separating components.

After parsing an EDI document, this configuration option will return the delimiter used to separate components within data elements of the EDI document.

This configuration option may be set in the StartInterchange event to specify the delimiter to be used.

CrossFieldValidationEnabled: Enables cross-field validation rules.

If true (default), cross-field validation rules present in the document schema will be checked.

Note, Bots Schema Files do not support syntax rules, therefore CrossFieldValidation rules will never execute for these schemas.

EDIStandard: The document format.

This property specifies standard that the document follows. Possible values are:

1 (EDIFACT - default)
3 (TRADACOMS)

ElementDelimiter: The delimiter character separating data elements.

After parsing an EDI document, this configuration option will return the delimiter used to separate data elements within segments of the EDI document.

This configuration option may be set in the StartInterchange event to specify the delimiter to be used.

Encoding: The character encoding to be applied when reading and writing data.

If the data contains non-ASCII characters this setting should be specified so characters are properly preserved. This value should be set to a valid character set such as "UTF-8" or "ISO-8859-1".

ExtraData: Extra data that has not been parsed by the component.

This setting will only be populated after the Flush method has been called and data exists in the internal parser which has not been processed.

HasXPath: Determines if the specified XPath exists.

This setting can be used to query if an XPath exists before setting XPath. For instance: Console.WriteLine(edireader.Config("HasXPath=IX/FG/TX/IT1Loop1/[2]"));

MaxValidationErrors: The maximum number of errors to save in the ValidationErrors property.

This setting specifies the maximum number of errors that will be kept in the ValidationErrors property. Once this limit is exceeded the ValidationError event will continue to fire but details will not be saved in the ValidationErrors property. The default value is 200.

ReleaseChar: The character used to escape delimiters within values.

After parsing an EDI document, this configuration option will return the escape character used to escape delimiters within values within the EDI document.

This configuration option may be set in the StartInterchange event to specify the escape character to be used.

ResolveXPathOnSet: Determines whether or not the XPath is resolved when set.

When true, the component will fully resolve a detailed path when XPath is specified. In this case, the XPath property will contain the XSegment s name as well as the indices when queried after being set.

If this value is set to false, the exact string will be returned when the XPath property is queried from the last time it was set.

For example, the following code will print the string "/[1]/[1]/[1]/[10]" when this value is false, and would print "/IX[1]/FG[1]/TX[1]/IT1Loop1[4]" when this value is true: reader.XPath = "/[1]/[1]/[1]/[10]"; Console.WriteLine(reader.XPath);

In another example, the following code sample will print "IX/FG/TX/IT1Loop1" when false and would print "/IX[1]/FG[1]/TX[1]/IT1Loop1[1]" when true: reader.XPath = "IX/FG/TX/IT1Loop1"; Console.WriteLine(reader.XPath);

This is useful in cases where the full XPath including indices is needed for future processing.

SegmentDelimiter: The delimiter character separating segments within the EDI document.

After parsing an EDI document, this configuration option will return the delimiter used to separate segments within the EDI document.

This configuration option may be set in the StartInterchange event to specify the delimiter to be used.

StrictSchemaValidation: Specifies the behavior during schema validation.

This setting specifies what happens when performing schema validation and a validation warning occurs. By default this value is set to 1 (Warn) and the Warning event will fire, but processing will not stop. See the WarnCode parameter list in the Warning event for details about possible validation warnings. Possible values for this setting are:


0 (Ignore)	All validation warnings will be ignored. Warning will not fire with warnings.
1 (Warn - default)	The Warning event will fire with all validation warnings.
2 (Error)	All validation warnings are treated as errors and will cause an exception. Processing will stop immediately.

Base Config Settings

BuildInfo: Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

GUIAvailable: Whether or not a message loop is available for processing events.

In a GUI-based application, long-running blocking operations may cause the application to stop responding to input until the operation returns. The component will attempt to discover whether or not the application has a message loop and, if one is discovered, it will process events in that message loop during any such blocking operation.

In some non-GUI applications, an invalid message loop may be discovered that will result in errant behavior. In these cases, setting GUIAvailable to false will ensure that the component does not attempt to process external events.

LicenseInfo: Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

Product: The product the license is for.
Product Key: The key the license was generated from.
License Source: Where the license was found (e.g., RuntimeLicense, License File).
License Type: The type of license installed (e.g., Royalty Free, Single Server).
Last Valid Build: The last valid build number for which the license will work.

MaskSensitive: Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.

This setting only works on these components: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseFIPSCompliantAPI: Tells the component whether or not to use FIPS certified APIs.

When set to true, the component will utilize the underlying operating system's certified APIs. Java editions, regardless of OS, utilize Bouncy Castle FIPS, while all the other Windows editions make use of Microsoft security libraries.

FIPS mode can be enabled by setting the UseFIPSCompliantAPI configuration setting to true. This is a static setting which applies to all instances of all components of the toolkit within the process. It is recommended to enable or disable this setting once before the component has been used to establish a connection. Enabling FIPS while an instance of the component is active and connected may result in unexpected behavior.

For more details please see the FIPS 140-2 Compliance article.

Note: This setting is only applicable on Windows.

Note: Enabling FIPS-compliance requires a special license; please contact sales@nsoftware.com for details.

UseInternalSecurityAPI: Whether or not to use the system security libraries or an internal implementation.

When set to false, the component will use the system security libraries by default to perform cryptographic functions where applicable. In this case, calls to unmanaged code will be made. In certain environments, this is not desirable. To use a completely managed security implementation, set this setting to true.

Setting this configuration setting to true tells the component to use the internal implementation instead of using the system security libraries.

On Windows, this setting is set to false by default. On Linux/macOS, this setting is set to true by default.

If using the .NET Standard Library, this setting will be true on all platforms. The .NET Standard library does not support using the system security libraries.

Note: This setting is static. The value set is applicable to all components used in the application.

When this value is set, the product's system dynamic link library (DLL) is no longer required as a reference, as all unmanaged code is stored in that file.

Trappable Errors (TRADACOMSValidator Component)

TRADACOMSValidator Errors


	1000 Input/Output error
	1001 No stream or file name were specified for the component
	1002 Unexpected end of file (EOF).
	1003 Segment not found.
	1004 Segment not found in schema.
	1005 Schema not found.
	1010 Invalid Writer state.
	1011 Segment does not have the specified element or component.
	1012 Invalid XPath.
	1013 DOM tree unavailable (set BuildDOM and reparse).
	1014 Document contains incomplete segments.
	1015 Document contains an open EDI structure (interchange, functional group or transaction) with no matching footer segment.
	1044 Error while reading schema file.
	1100 Component is busy.
	1099 Unexpected error.