TRADACOMSTranslator Class

Properties   Methods   Events   Config Settings   Errors  

The TRADACOMSTranslator class is optimized for TRADACOMS translation, providing a simple way to convert TRADACOMS documents to and from XML or JSON.

Syntax

ipworkseditranslator.Tradacomstranslator

Remarks

The class provides a way to convert TRADACOMS to XML or JSON and vice versa.

Getting Started

The class will convert a document from the format specified by InputFormat to the format specified by OutputFormat. In practice this allows for converting to XML or JSON from EDI and vice versa.

Before translating from EDI to XML or JSON it is recommended to load a schema using the LoadSchema method. This ensures additional information can be included in the XML or JSON document. If a schema is specified the XML or JSON will include types and descriptions as element attributes which are useful for interpreting the data.

EDI elements may optionally be renamed when creating XML. To define how an element is renamed add a renaming rule by calling AddRenamingRule.

After calling Translate the resulting output will contain the EDI, XML or JSON data as defined by OutputFormat. If the output data is XML the ExportXMLSchema method may be called to export a schema (.xsd) defining the structure of a valid XML document. XML documents which adhere to this document may be translated from XML to EDI.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• SetInputStream
• InputFile
• InputData

• SetOutputStream
• OutputFile
• OutputData: The output data is written to this property if no other destination is specified.

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.

InputData Property (TRADACOMSTranslator Class)

The data to translate.

Syntax

public String getInputData();


public void setInputData(String inputData);

Default Value

""

Remarks

This property specifies the data to be translated. This may be set to EDI data or XML/JSON data. To specify the type of data held by the property set InputFormat.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• SetInputStream
• InputFile
• InputData

• SetOutputStream
• OutputFile
• OutputData: The output data is written to this property if no other destination is specified.

This property is not available at design time.

InputFile Property (TRADACOMSTranslator Class)

The file to translate.

Syntax

public String getInputFile();


public void setInputFile(String inputFile);

Default Value

""

Remarks

This property specifies the file to be processed. Set this property to the full or relative path to the file which will be processed. To specify the type of data in the input file set InputFormat.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• SetInputStream
• InputFile
• InputData

• SetOutputStream
• OutputFile
• OutputData: The output data is written to this property if no other destination is specified.

This property is not available at design time.

InputFormat Property (TRADACOMSTranslator Class)

The format of the input data.

Syntax

public int getInputFormat();


public void setInputFormat(int inputFormat);


Enumerated values:
  public final static int tifXML = 0;
  public final static int tifJSON = 1;
  public final static int tifTRADACOMS = 4;

Default Value

4

Remarks

This property specifies the format of the input data. The value set here, along with OutputFormat, determines how the data is converted when Translate is called.

Possible values are:

• 0 (ifXML)
• 1 (ifJSON)
• 4 (ifTRADACOMS)

This property is not available at design time.

OutputData Property (TRADACOMSTranslator Class)

The translated data.

Syntax

public String getOutputData();


public void setOutputData(String outputData);

Default Value

""

Remarks

This property will be populated with the translated data after calling Translate if OutputFile and SetOutputStream are not set.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• SetInputStream
• InputFile
• InputData

• SetOutputStream
• OutputFile
• OutputData: The output data is written to this property if no other destination is specified.

This property is not available at design time.

OutputFile Property (TRADACOMSTranslator Class)

The file to which the translated data will be written.

Syntax

public String getOutputFile();


public void setOutputFile(String outputFile);

Default Value

""

Remarks

This property specifies the file to which the translated data will be written. This may be set to an absolute or relative path. This should be set before calling Translate.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• SetInputStream
• InputFile
• InputData

• SetOutputStream
• OutputFile
• OutputData: The output data is written to this property if no other destination is specified.

This property is not available at design time.

OutputFormat Property (TRADACOMSTranslator Class)

The format of the output data.

Syntax

public int getOutputFormat();


public void setOutputFormat(int outputFormat);


Enumerated values:
  public final static int tofXML = 0;
  public final static int tofJSON = 1;
  public final static int tofTRADACOMS = 4;

Default Value

0

Remarks

This property specifies the format of the output data. The value set here, along with InputFormat, determines how the data is converted when Translate is called.

Possible values are:

• 0 (ofXML)
• 1 (ofJSON)
• 4 (ofTRADACOMS)

This property is not available at design time.

Overwrite Property (TRADACOMSTranslator Class)

Whether to overwrite the file.

Syntax

public boolean isOverwrite();


public void setOverwrite(boolean overwrite);

Default Value

False

Remarks

This property specifies whether the file is overwritten. If set to False (default) the class throws an exception when attempting to write to a file which already exists. If set to True the class will overwrite the existing file. This property is applicable to the following methods:

• SaveRenamingRules
• Translate
• ExportXMLSchema

RenamingRule Property (TRADACOMSTranslator Class)

The rule defining how EDI elements are renamed when translating to XML or JSON.

Syntax

public String getRenamingRule();


public void setRenamingRule(String renamingRule);

Default Value

""

Remarks

The renaming rule specified by RenamingRuleIndex. Renaming rules are optional.

The renaming rule defines how EDI elements are renamed when translating to XML or JSON. The format is:

ediname:xmlanme

Note: Renaming rules are not required when converting from XML or JSON to EDI.

This property is not available at design time.

RenamingRuleCount Property (TRADACOMSTranslator Class)

The number of renaming rules.

Syntax

public int getRenamingRuleCount();

Default Value

0

Remarks

This property returns the current number of renaming rules.

This property is read-only and not available at design time.

RenamingRuleIndex Property (TRADACOMSTranslator Class)

The index of the current renaming rule.

Syntax

public int getRenamingRuleIndex();


public void setRenamingRuleIndex(int renamingRuleIndex);

Default Value

-1

Remarks

This property specifies the current renaming rule. Valid values are from 0 to RenamingRuleCount - 1.

When set RenamingRule is populated with the renaming rule identified by the index.

This property is not available at design time.

SchemaFormat Property (TRADACOMSTranslator Class)

The format of the schema file.

Syntax

public int getSchemaFormat();


public void setSchemaFormat(int schemaFormat);


Enumerated values:
  public final static int schemaAutomatic = 0;
  public final static int schemaBinary = 1;
  public final static int schemaBizTalk = 2;
  public final static int schemaSEF = 3;
  public final static int schemaBOTS = 4;
  public final static int schemaAltova = 5;
  public final static int schemaJSON = 6;

Default Value

0

Remarks

Set SchemaFormat before calling the LoadSchema method to specify the loading schema format.

The following schema formats are supported:

Suffix Property (TRADACOMSTranslator Class)

What to append after each segment delimiter.

Syntax

public int getSuffix();


public void setSuffix(int suffix);


Enumerated values:
  public final static int suffixNone = 0;
  public final static int suffixCR = 1;
  public final static int suffixLF = 2;
  public final static int suffixCRLF = 3;

Default Value

3

Remarks

If Suffix is different from suffixNone, trailing (suffix) characters are appended after each segment delimiter. This is useful if you want to have a carriage return/line feed after each segment to make the document more readable.

This property is not available at design time.

UseSchemaName Property (TRADACOMSTranslator Class)

Whether the output XML uses element names based on name defined in the schema.

Syntax

public boolean isUseSchemaName();


public void setUseSchemaName(boolean useSchemaName);

Default Value

False

Remarks

This setting specifies whether the XML element name written to output is taken from the Id of the element defined in the schema. It is only applicable to ArcESB JSON schemas. For instance, given an EDIFACT document with the segment:

BGM+380:::TAX INVOICE

When this setting is True the XML generated may look like:

<BGM type="Segment">
<C002 type="Composite" desc="DOCUMENT/MESSAGE NAME">
<_1001 desc="Document/message name, coded">380</_1001>
<_1131 desc="Code list qualifier"></_1131>
<_3055 desc="Code list responsible agency, coded"></_3055>
<_1000 desc="Document/message name">TAX INVOICE</_1000>
</C002>

Where the elements "_1001", "C002", etc. are taken from the Id values of the EDI elements in the schema files.

Note: In order to produce valid XML, elements that would begin with a digit are prefixed with the "_" character.

In contrast if False (default) the XML generated may look like:

<BGM type="Segment">
<BGM01 type="Composite" desc="DOCUMENT/MESSAGE NAME">
<BGM0101 desc="Document/message name, coded">380</BGM0101>
<BGM0102 desc="Code list qualifier"></BGM0102>
<BGM0103 desc="Code list responsible agency, coded"></BGM0103>
<BGM0104 desc="Document/message name">TAX INVOICE</BGM0104>
</BGM01>

AddRenamingRule Method (Tradacomstranslator Class)

This method adds a renaming rule to define how an EDI element is renamed when translating to XML.

Syntax

public void addRenamingRule(String rule);

Remarks

This method adds a renaming rule. The rule defining how EDI elements are renamed when translating to XML. Renaming rules are optional.

The renaming rule defines how EDI elements are renamed when translating to XML or JSON. The format is:

ediname:xmlanme

Note: Renaming rules are not required when converting from XML or JSON to EDI.

Config Method (Tradacomstranslator Class)

Sets or retrieves a configuration setting.

Syntax

public String config(String configurationString);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DisplaySchemaInfo Method (Tradacomstranslator Class)

Returns a string showing the structure of the schema defining the document.

Syntax

public String displaySchemaInfo();

Remarks

After calling LoadSchema this may be called to obtain information about the structure of the schema defining the document. If the desired XPath is not known this helps determine the structure so that the correct XPath can be built.

Note: A valid schema must be loaded via LoadSchema.

For instance: Console.WriteLine(component.DisplaySchemaInfo()); Will output text like:

UNH[0,1]
  BGM[0,1]
  DTM[0,35]
  PAI[0,1]
  ALI[0,5]
  IMD[0,1]
  FTX[0,10]
  LOC[0,10]
  GIS[0,10]
  DGS[0,1]
  RFFLoop1[0,99]
    RFF[0,1]
    DTM_2[0,5]
    GIR[0,5]
    LOC_2[0,2]
    MEA[0,5]
    QTY[0,2]
    FTX_2[0,5]
    MOA[0,2]
  NADLoop1[0,99]
    NAD[0,1]
    LOC_3[0,25]
    FII[0,5]
    RFFLoop2[0,9999]
      RFF_2[0,1]
      DTM_3[0,5]
    DOCLoop1[0,5]
      DOC[0,1]
      DTM_4[0,5]
    CTALoop1[0,5]
      CTA[0,1]
      COM[0,5]
  TAXLoop1[0,5]
    TAX[0,1]
    MOA_2[0,1]
    LOC_4[0,5]
  CUXLoop1[0,5]
    CUX[0,1]
    DTM_5[0,5]
  PATLoop1[0,10]
    PAT[0,1]
    DTM_6[0,5]
    PCD[0,1]
    MOA_3[0,1]
    PAI_2[0,1]
    FII_2[0,1]
  TDTLoop1[0,10]
    TDT[0,1]
    TSR[0,1]
    LOCLoop1[0,10]
      LOC_5[0,1]
      DTM_7[0,5]
    RFFLoop3[0,9999]
      RFF_3[0,1]
      DTM_8[0,5]
  TODLoop1[0,5]
    TOD[0,1]
    LOC_6[0,2]
  PACLoop1[0,1000]
    PAC[0,1]
    MEA_2[0,5]
    EQD[0,1]
    PCILoop1[0,5]
      PCI[0,1]
      RFF_4[0,1]
      DTM_9[0,5]
      GIN[0,5]
  ALCLoop1[0,9999]
    ALC[0,1]
    ALI_2[0,5]
    FTX_3[0,1]
    RFFLoop4[0,5]
      RFF_5[0,1]
      DTM_10[0,5]
    QTYLoop1[0,1]
      QTY_2[0,1]
      RNG[0,1]
    PCDLoop1[0,1]
      PCD_2[0,1]
      RNG_2[0,1]
    MOALoop1[0,2]
      MOA_4[0,1]
      RNG_3[0,1]
      CUX_2[0,1]
      DTM_11[0,1]
    RTELoop1[0,1]
      RTE[0,1]
      RNG_4[0,1]
    TAXLoop2[0,5]
      TAX_2[0,1]
      MOA_5[0,1]
  RCSLoop1[0,100]
    RCS[0,1]
    RFF_6[0,5]
    DTM_12[0,5]
    FTX_4[0,5]
  AJTLoop1[0,1]
    AJT[0,1]
    FTX_5[0,5]
  INPLoop1[0,1]
    INP[0,1]
    FTX_6[0,5]
  LINLoop1[0,9999999]
    LIN[0,1]
    PIA[0,25]
    IMD_2[0,10]
    MEA_3[0,5]
    QTY_3[0,5]
    PCD_3[0,1]
    ALI_3[0,5]
    DTM_13[0,35]
    GIN_2[0,1000]
    GIR_2[0,1000]
    QVR[0,1]
    EQD_2[0,1]
    FTX_7[0,5]
    DGS_2[0,1]
    MOALoop2[0,10]
      MOA_6[0,1]
      CUX_3[0,1]
    PATLoop2[0,10]
      PAT_2[0,1]
      DTM_14[0,5]
      PCD_4[0,1]
      MOA_7[0,1]
    PRILoop1[0,25]
      PRI[0,1]
      CUX_4[0,1]
      APR[0,1]
      RNG_5[0,1]
      DTM_15[0,5]
    RFFLoop5[0,10]
      RFF_7[0,1]
      DTM_16[0,5]
    PACLoop2[0,10]
      PAC_2[0,1]
      MEA_4[0,10]
      EQD_3[0,1]
      PCILoop2[0,10]
        PCI_2[0,1]
        RFF_8[0,1]
        DTM_17[0,5]
        GIN_3[0,10]
    LOCLoop2[0,9999]
      LOC_7[0,1]
      QTY_4[0,100]
      DTM_18[0,5]
    TAXLoop3[0,99]
      TAX_3[0,1]
      MOA_8[0,1]
      LOC_8[0,5]
    NADLoop2[0,99]
      NAD_2[0,1]
      LOC_9[0,5]
      RFFLoop6[0,5]
        RFF_9[0,1]
        DTM_19[0,5]
      DOCLoop2[0,5]
        DOC_2[0,1]
        DTM_20[0,5]
      CTALoop2[0,5]
        CTA_2[0,1]
        COM_2[0,5]
    ALCLoop2[0,30]
      ALC_2[0,1]
      ALI_4[0,5]
      DTM_21[0,5]
      FTX_8[0,1]
      QTYLoop2[0,1]
        QTY_5[0,1]
        RNG_6[0,1]
      PCDLoop2[0,1]
        PCD_5[0,1]
        RNG_7[0,1]
      MOALoop3[0,2]
        MOA_9[0,1]
        RNG_8[0,1]
        CUX_5[0,1]
        DTM_22[0,1]
      RTELoop2[0,1]
        RTE_2[0,1]
        RNG_9[0,1]
      TAXLoop4[0,5]
        TAX_4[0,1]
        MOA_10[0,1]
    TDTLoop2[0,10]
      TDT_2[0,1]
      LOCLoop3[0,10]
        LOC_10[0,1]
        DTM_23[0,5]
    TODLoop2[0,5]
      TOD_2[0,1]
      LOC_11[0,2]
    RCSLoop2[0,100]
      RCS_2[0,1]
      RFF_10[0,5]
      DTM_24[0,5]
      FTX_9[0,5]
    GISLoop1[0,10]
      GIS_2[0,1]
      RFF_11[0,1]
      DTM_25[0,5]
      GIR_3[0,5]
      LOC_12[0,2]
      MEA_5[0,5]
      QTY_6[0,2]
      FTX_10[0,5]
      MOA_11[0,2]
  UNS[0,1]
  CNT[0,10]
  MOALoop4[0,100]
    MOA_12[0,1]
    RFFLoop7[0,1]
      RFF_12[0,1]
      DTM_26[0,5]
  TAXLoop5[0,10]
    TAX_5[0,1]
    MOA_13[0,2]
  ALCLoop3[0,15]
    ALC_3[0,1]
    ALI_5[0,1]
    MOA_14[0,2]
    FTX_11[0,1]
  UNT[0,1]

ExportXMLSchema Method (Tradacomstranslator Class)

Exports a XML schema.

Syntax

public void exportXMLSchema(String schemaFile);

Remarks

This method exports a XML schema describing the valid format of the XML document.

After translating a document from EDI to XML, this method may be called to export a schema (.xsd) describing the structure of a valid XML documents. XML documents which adhere to this document may be translated from XML to EDI.

This method is helpful if XML will be generated outside of the class and later converted to EDI by the class.

The SchemaFile parameter specifies the absolute or relative path to the file on disk.

GenerateAck Method (Tradacomstranslator Class)

Generates an EDI acknowledgement.

Syntax

public String generateAck();

Remarks

This functionality is not yet implemented and is reserved for future use.

LoadRenamingRules Method (Tradacomstranslator Class)

Loads a set of renaming rules from file.

Syntax

public void loadRenamingRules(String ruleFile);

Remarks

This method loads a set of renaming rules from a file on disk. The RenamingRuleCount will reflect the number of rules that were loaded. When loading a rule file all previously loaded rules will be replaced.

The RuleFile parameter specifies the absolute or relative path to the file on disk.

LoadSchema Method (Tradacomstranslator Class)

Loads a schema file describing a Transaction Set.

Syntax

public void loadSchema(String fileName);

Remarks

This method parses the File and loads it into an internal schema list. The class will attempt to automatically detect the SchemaFormat.

If the schema file does not exist or cannot be parsed as an EDI schema, the class throws an exception.

LoadSchemaStream Method (Tradacomstranslator Class)

Loads a schema stream describing a Transaction Set.

Syntax

public void loadSchemaStream(java.io.InputStream schemaStream);

Remarks

Parses Stream and loads it into an internal schema list. The SchemaFormat property must be set before calling this method.

The following SchemaFormat values are supported when calling this method:

• schemaBinary
• schemaBizTalk
• schemaSEF

Reset Method (Tradacomstranslator Class)

Resets the state of the control.

Syntax

public void reset();

Remarks

Reset resets the state of the class. All properties will be set to their default values.

SaveRenamingRules Method (Tradacomstranslator Class)

Saves the current renaming rule set to a file.

Syntax

public void saveRenamingRules(String ruleFile);

Remarks

This method saves the current renaming rule set specified by RenamingRule, RenamingRuleIndex, and RenamingRuleCount to a file on disk. These rules may be reloaded at a later time by calling LoadRenamingRules.

The RuleFile parameter specifies the absolute or relative path to the file on disk.

SetInputStream Method (Tradacomstranslator Class)

The stream to which the class will read the data to translate.

Syntax

public void setInputStream(java.io.InputStream inputStream);

Remarks

This method sets the stream from which the class will read the data to translate.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• SetInputStream
• InputFile
• InputData

• SetOutputStream
• OutputFile
• OutputData: The output data is written to this property if no other destination is specified.

By default a stream will be closed after the called method returns. To leave a stream open for further processing set CloseStreamAfterTranslate to false.

SetOutputStream Method (Tradacomstranslator Class)

The stream to which the class will write the translated data.

Syntax

public void setOutputStream(java.io.OutputStream outputStream);

Remarks

This method sets the stream to which the class will write the translated data.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• SetInputStream
• InputFile
• InputData

• SetOutputStream
• OutputFile
• OutputData: The output data is written to this property if no other destination is specified.

By default a stream will be closed after the called method returns. To leave a stream open for further processing set CloseStreamAfterTranslate to false.

Translate Method (Tradacomstranslator Class)

Translates the specified data.

Syntax

public void translate();

Remarks

This method translates the specified data.

The class will convert a document from the format specified by InputFormat to the format specified by OutputFormat. In practice this allows for converting to XML or JSON from EDI and vice versa.

Before translating from EDI to XML or JSON it is recommended to load a schema using the LoadSchema method. This ensures additional information can be included in the XML or JSON document. If a schema is specified the XML or JSON will include types and descriptions as element attributes which are useful for interpreting the data.

EDI elements may optionally be renamed when creating XML. To define how an element is renamed add a renaming rule by calling AddRenamingRule.

After calling Translate the resulting output will contain the EDI, XML or JSON data as defined by OutputFormat. If the output data is XML the ExportXMLSchema method may be called to export a schema (.xsd) defining the structure of a valid XML document. XML documents which adhere to this document may be translated from XML to EDI.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• SetInputStream
• InputFile
• InputData

• SetOutputStream
• OutputFile
• OutputData: The output data is written to this property if no other destination is specified.

EndFunctionalGroup Event (Tradacomstranslator Class)

Fires whenever a control segment is read that marks the end of an interchange.

Syntax

public class DefaultTradacomstranslatorEventListener implements TradacomstranslatorEventListener {
  ...
  public void endFunctionalGroup(TradacomstranslatorEndFunctionalGroupEvent e) {}
  ...
}

public class TradacomstranslatorEndFunctionalGroupEvent {
  public String tag;
  public String controlNumber;
  public int count;
  public String fullSegment;
}

Remarks

The EndFunctionalGroup event will fire when a control segment marking the end of a functional group is read. The Tag parameter contains the tag of the segment, such as GE. ControlNumber contains the control number associated with the segment, and links this event with the corresponding StartFunctionalGroup event. Count contains the value of the count element included in the closing segment, which identifies the number of transactions in a functional group.

EndInterchange Event (Tradacomstranslator Class)

Fires whenever a control segment is read that marks the end of an interchange.

Syntax

public class DefaultTradacomstranslatorEventListener implements TradacomstranslatorEventListener {
  ...
  public void endInterchange(TradacomstranslatorEndInterchangeEvent e) {}
  ...
}

public class TradacomstranslatorEndInterchangeEvent {
  public String tag;
  public String controlNumber;
  public String fullSegment;
}

Remarks

The EndInterchange event will fire when a control segment marking the end of an interchange is read. The Tag parameter contains the tag of the segment, such as IEA. ControlNumber contains the control number associated with the segment, and links this event with the corresponding StartInterchange event.

EndLoop Event (Tradacomstranslator Class)

Fires when the end of a loop is detected in a transaction set.

Syntax

public class DefaultTradacomstranslatorEventListener implements TradacomstranslatorEventListener {
  ...
  public void endLoop(TradacomstranslatorEndLoopEvent e) {}
  ...
}

public class TradacomstranslatorEndLoopEvent {
}

Remarks

The EndLoop event will fire after the last segment in a loop is read. Each EndLoop event is paired with one StartLoop event.

EndTransaction Event (Tradacomstranslator Class)

Fires whenever a control segment is read that marks the end of a transaction.

Syntax

public class DefaultTradacomstranslatorEventListener implements TradacomstranslatorEventListener {
  ...
  public void endTransaction(TradacomstranslatorEndTransactionEvent e) {}
  ...
}

public class TradacomstranslatorEndTransactionEvent {
  public String tag;
  public String controlNumber;
  public int count;
  public String fullSegment;
}

Remarks

The EndTransaction event will fire when a control segment marking the end of a transaction is read. The Tag parameter contains the tag of the segment, such as SE. ControlNumber contains the control number associated with the segment, and links this event with the corresponding StartTransaction event. Count contains the value of the count element included in the closing segment, which identifies the number of segments in a transaction set.

Error Event (Tradacomstranslator Class)

Fired when information is available about errors during data delivery.

Syntax

public class DefaultTradacomstranslatorEventListener implements TradacomstranslatorEventListener {
  ...
  public void error(TradacomstranslatorErrorEvent e) {}
  ...
}

public class TradacomstranslatorErrorEvent {
  public int errorCode;
  public String description;
}

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class throws an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

ResolveSchema Event (Tradacomstranslator Class)

Fires whenever a new transaction set is encountered and no schema is found for it.

Syntax

public class DefaultTradacomstranslatorEventListener implements TradacomstranslatorEventListener {
  ...
  public void resolveSchema(TradacomstranslatorResolveSchemaEvent e) {}
  ...
}

public class TradacomstranslatorResolveSchemaEvent {
  public String transactionCode;
  public String standardVersion;
}

Remarks

The ResolveSchema event will fire when a the class encounters the header segment of a new transaction set, but it finds no schema corresponding to it already loaded.

TransactionCode contains the code of the transaction, such as "810" or "APERAK".

StandardVersion contains the version of the transaction, such as "004010" or "D95A".

When processing this event, the caller can use LoadSchema() to load a new schema into the class that can be used to parse the transaction.

After the event fires, if the class still doesn't have a matching schema, then it will attempt schema-less parsing of the transaction set.

Segment Event (Tradacomstranslator Class)

Fires whenever a data segment in a transaction set is read.

Syntax

public class DefaultTradacomstranslatorEventListener implements TradacomstranslatorEventListener {
  ...
  public void segment(TradacomstranslatorSegmentEvent e) {}
  ...
}

public class TradacomstranslatorSegmentEvent {
  public String tag;
  public String name;
  public String loopName;
  public String fullSegment;
}

Remarks

The Segment event will fire when a data segment is read. The Tag parameter contains the tag of the segment. Name contains the name of the segment as defined in the associated transaction set schema. LoopName contains the name of the loop or group this segment is present in (such as N1Loop1).

StartFunctionalGroup Event (Tradacomstranslator Class)

Fires whenever a control segment is read that marks the start of a functional group.

Syntax

public class DefaultTradacomstranslatorEventListener implements TradacomstranslatorEventListener {
  ...
  public void startFunctionalGroup(TradacomstranslatorStartFunctionalGroupEvent e) {}
  ...
}

public class TradacomstranslatorStartFunctionalGroupEvent {
  public String tag;
  public String controlNumber;
  public String fullSegment;
}

Remarks

The StartFunctionalGroup event will fire when a control segment marking the start of a functional group structure is read. The Tag parameter contains the tag of the segment, such as GS. ControlNumber contains the control number associated with the segment.

StartInterchange Event (Tradacomstranslator Class)

Fires whenever a control segment is read that marks the start of an interchange.

Syntax

public class DefaultTradacomstranslatorEventListener implements TradacomstranslatorEventListener {
  ...
  public void startInterchange(TradacomstranslatorStartInterchangeEvent e) {}
  ...
}

public class TradacomstranslatorStartInterchangeEvent {
  public String tag;
  public String controlNumber;
  public String fullSegment;
}

Remarks

The StartInterchange event will fire when a control segment marking the start of an interchange structure is read. The Tag parameter contains the tag of the segment, such as ISA. ControlNumber contains the control number associated with the segment.

StartLoop Event (Tradacomstranslator Class)

Fires when the starting of a loop is detected in a transaction set.

Syntax

public class DefaultTradacomstranslatorEventListener implements TradacomstranslatorEventListener {
  ...
  public void startLoop(TradacomstranslatorStartLoopEvent e) {}
  ...
}

public class TradacomstranslatorStartLoopEvent {
  public String name;
}

Remarks

The StartLoop event will fire when the tag of a loop trigger segment is read. The Name parameter contains the schema-provided name of the loop, such as "N1Loop1".

StartTransaction Event (Tradacomstranslator Class)

Fires whenever a control segment is read that marks the start of a transaction.

Syntax

public class DefaultTradacomstranslatorEventListener implements TradacomstranslatorEventListener {
  ...
  public void startTransaction(TradacomstranslatorStartTransactionEvent e) {}
  ...
}

public class TradacomstranslatorStartTransactionEvent {
  public String tag;
  public String controlNumber;
  public String code;
  public String fullSegment;
}

Remarks

The StartTransaction event will fire when a control segment marking the start of a transaction is read. The Tag parameter contains the tag of the segment, such as ST. ControlNumber contains the control number associated with the segment. Code contains the transaction code (such as 810).

Warning Event (Tradacomstranslator Class)

Fires whenever a validation warning is encountered.

Syntax

public class DefaultTradacomstranslatorEventListener implements TradacomstranslatorEventListener {
  ...
  public void warning(TradacomstranslatorWarningEvent e) {}
  ...
}

public class TradacomstranslatorWarningEvent {
  public int warnCode;
  public String message;
  public int segmentNumber;
  public String segmentTag;
  public String technicalErrorCode;
  public String segmentErrorCode;
  public String elementErrorCode;
  public int elementPosition;
}

Remarks

The Warning event will fire during parsing of a segment of an EDI document. The WarnCode parameter contains the type of warning encountered. Message is a textual description of the problem. SegmentNumber is the index of the segment where the problem was found.

SegmentTag holds the tag name of the segment. SegmentErrorCode holds the error code that may be used in the IK304 field of a 999. ElementErrorCode holds the error code that may be used in the IK403 field of a 999. ElementPosition is the position of the element where the error occurred.

It's very important to note that segment validation happens right in the middle of the parsing process. Because of this, the Warning event will usually fire long before the validated segment becomes the current segment for the parser state. This means you cannot access the parser properties to examine the current segment in relation with the Warning event when the event fires.

Possible WarnCode values are:

TechnicalErrorCode holds a technical error code that helps identify structural issues with the document. For instance when parsing an X12 document this will hold values that may be used for TA1 error codes. When parsing X12 documents the following codes are applicable:

Config Settings (Tradacomstranslator Class)

TRADACOMSTranslator Config Settings

PYT+8+COLLECT:::+25'

PYT+8+COLLECT+25'

{
	"@meta": {
		"@type": "Interchange",
		"ISA01": {
			"@desc": "Authorization Information Qualifier",
			"@value": "00"
		},

<!--Entity Identifier Code-->
<N101><!--Ship To-->ST</N101>

<N101 desc="Entity Identifier Code">ST</N101>

<N101>ST</N101>

Base Config Settings

Trappable Errors (Tradacomstranslator Class)

TRADACOMSTranslator Errors