VDAValidator Module

Properties   Methods   Events   Config Settings   Errors  

VDAValidator is a lightweight EDI validation module designed for simple document validation.

Syntax

IPWorksEDITranslator.Vdavalidator

Remarks

This component provides a simple way to validate an EDI document and obtain details about any validation errors.

EDI Validation

Before calling Validate set SchemaFormat and call LoadSchema to load the schema for the document to be validated. The schema defines many validation rules such as minimum and maximum lengths, minimum and maximum occurrences, and more. The validation performed by the class depends largely on the schema's definition.

When the Validate method is called the class will attempt to validate the document. If errors are found during validation the ValidationError event will fire with details about each error as it is encountered. After the document has been validated the ValidationErrors property will be populated with details of each error.

Inspect the ValidationErrors property for information on any errors that were encountered.

Validation Example validator.InputFile = "files/EDIDocuments/MyEDIDoc.txt"; validator.LoadSchema("my_schemas/00501/RSSBus_005010X222A1_837.json"); validator.Validate(); foreach (ValidationErrorDetail error in validator.ValidationErrors) { Console.WriteLine(error.ErrorCode + ": " + error.Message); }

Property List

The following is the full list of the properties of the module with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the module with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the module with short descriptions. Click on the links for further details.

EDIStandardVersion Property (VDAValidator Module)

The version of the EDI specification.

Syntax

• Swift
• Objective-C

public var ediStandardVersion: String {
  get {...}
}

@property (nonatomic,readonly,assign,getter=EDIStandardVersion) NSString* EDIStandardVersion;

- (NSString*)EDIStandardVersion;

Default Value

""

Remarks

This property will be populated after parsing begins and the correct version string for is located via the schema, such as 004010 for X12.

This property is read-only.

InputData Property (VDAValidator Module)

The data to parse.

Syntax

• Swift
• Objective-C

public var inputData: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=inputData,setter=setInputData:) NSString* inputData;

- (NSString*)inputData;
- (void)setInputData :(NSString*)newInputData;

Default Value

""

Remarks

This property specifies the data to be parsed.

Input Properties

The class will determine the source of the input based on which properties are set.

The order in which the input properties are checked is as follows:

• InputFile
• InputData

InputFile Property (VDAValidator Module)

The file to parse.

Syntax

• Swift
• Objective-C

public var inputFile: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=inputFile,setter=setInputFile:) NSString* inputFile;

- (NSString*)inputFile;
- (void)setInputFile :(NSString*)newInputFile;

Default Value

""

Remarks

This property specifies the file to be processed. Set this property to the full or relative path to the file which will be processed.

Input Properties

The class will determine the source of the input based on which properties are set.

The order in which the input properties are checked is as follows:

• InputFile
• InputData

SchemaFormat Property (VDAValidator Module)

The format of the schema file.

Syntax

• Swift
• Objective-C

public var schemaFormat: VdavalidatorSchemaFormats {
  get {...}
  set {...}
}

public enum VdavalidatorSchemaFormats: Int32 {
  case schemaAutomatic = 0
  case schemaBinary = 1
  case schemaBizTalk = 2
  case schemaSEF = 3
  case schemaBOTS = 4
  case schemaAltova = 5
  case schemaJSON = 6
}

@property (nonatomic,readwrite,assign,getter=schemaFormat,setter=setSchemaFormat:) int schemaFormat;

- (int)schemaFormat;
- (void)setSchemaFormat :(int)newSchemaFormat;

Default Value

0

Remarks

Set SchemaFormat before calling the LoadSchema method to specify the loading schema format.

The following schema formats are supported:

ValidationErrors Property (VDAValidator Module)

Collection of validation errors for the current document.

Syntax

• Swift
• Objective-C

public var validationErrors: Array<ValidationErrorDetail> {
  get {...}
}

@property (nonatomic,readonly,assign,getter=validationErrorCount) int validationErrorCount;

- (int)validationErrorCount;

- (int)validationErrorColumn:(int)validationErrorIndex;

- (NSString*)validationErrorElementErrorCode:(int)validationErrorIndex;

- (int)validationErrorElementPosition:(int)validationErrorIndex;

- (int)validationErrorErrorCode:(int)validationErrorIndex;

- (int)validationErrorLine:(int)validationErrorIndex;

- (NSString*)validationErrorMessage:(int)validationErrorIndex;

- (NSString*)validationErrorSegmentErrorCode:(int)validationErrorIndex;

- (int)validationErrorSegmentNumber:(int)validationErrorIndex;

- (NSString*)validationErrorSegmentTag:(int)validationErrorIndex;

- (NSString*)validationErrorTechnicalErrorCode:(int)validationErrorIndex;

Default Value

""

Remarks

After calling Validate this property contains details of any validation errors. Validation errors are also accessible through the ValidationError event as the document is validated.

This property is read-only.

CompileSchema Method (VDAValidator Module)

Compiles an existing XSD schema into an optimized binary representation.

Syntax

• Swift
• Objective-C

public func compileSchema(xsdSchema: String, binSchema: String) throws -> Void

- (void)compileSchema:(NSString*)xsdSchema :(NSString*)binSchema;

Remarks

This method parses XsdSchema and generates an optimized binary representation that is saved into the path referenced by BinSchema. Binary schemas are smaller and require less resources when loading later using LoadSchema

If the schema file does not exists or cannot be parsed as an EDI schema, the component throws an exception.

Config Method (VDAValidator Module)

Sets or retrieves a configuration setting.

Syntax

• Swift
• Objective-C

public func config(configurationString: String) throws -> String

- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DisplaySchemaInfo Method (VDAValidator Module)

Returns a string showing the structure of the schema defining the document.

Syntax

• Swift
• Objective-C

public func displaySchemaInfo() throws -> String

- (NSString*)displaySchemaInfo;

Remarks

After calling LoadSchema this may be called to obtain information about the structure of the schema defining the document. If the desired XPath is not known this helps determine the structure so that the correct XPath can be built.

Note: A valid schema must be loaded via LoadSchema.

For instance: Console.WriteLine(component.DisplaySchemaInfo()); Will output text like:

UNH[0,1]
  BGM[0,1]
  DTM[0,35]
  PAI[0,1]
  ALI[0,5]
  IMD[0,1]
  FTX[0,10]
  LOC[0,10]
  GIS[0,10]
  DGS[0,1]
  RFFLoop1[0,99]
    RFF[0,1]
    DTM_2[0,5]
    GIR[0,5]
    LOC_2[0,2]
    MEA[0,5]
    QTY[0,2]
    FTX_2[0,5]
    MOA[0,2]
  NADLoop1[0,99]
    NAD[0,1]
    LOC_3[0,25]
    FII[0,5]
    RFFLoop2[0,9999]
      RFF_2[0,1]
      DTM_3[0,5]
    DOCLoop1[0,5]
      DOC[0,1]
      DTM_4[0,5]
    CTALoop1[0,5]
      CTA[0,1]
      COM[0,5]
  TAXLoop1[0,5]
    TAX[0,1]
    MOA_2[0,1]
    LOC_4[0,5]
  CUXLoop1[0,5]
    CUX[0,1]
    DTM_5[0,5]
  PATLoop1[0,10]
    PAT[0,1]
    DTM_6[0,5]
    PCD[0,1]
    MOA_3[0,1]
    PAI_2[0,1]
    FII_2[0,1]
  TDTLoop1[0,10]
    TDT[0,1]
    TSR[0,1]
    LOCLoop1[0,10]
      LOC_5[0,1]
      DTM_7[0,5]
    RFFLoop3[0,9999]
      RFF_3[0,1]
      DTM_8[0,5]
  TODLoop1[0,5]
    TOD[0,1]
    LOC_6[0,2]
  PACLoop1[0,1000]
    PAC[0,1]
    MEA_2[0,5]
    EQD[0,1]
    PCILoop1[0,5]
      PCI[0,1]
      RFF_4[0,1]
      DTM_9[0,5]
      GIN[0,5]
  ALCLoop1[0,9999]
    ALC[0,1]
    ALI_2[0,5]
    FTX_3[0,1]
    RFFLoop4[0,5]
      RFF_5[0,1]
      DTM_10[0,5]
    QTYLoop1[0,1]
      QTY_2[0,1]
      RNG[0,1]
    PCDLoop1[0,1]
      PCD_2[0,1]
      RNG_2[0,1]
    MOALoop1[0,2]
      MOA_4[0,1]
      RNG_3[0,1]
      CUX_2[0,1]
      DTM_11[0,1]
    RTELoop1[0,1]
      RTE[0,1]
      RNG_4[0,1]
    TAXLoop2[0,5]
      TAX_2[0,1]
      MOA_5[0,1]
  RCSLoop1[0,100]
    RCS[0,1]
    RFF_6[0,5]
    DTM_12[0,5]
    FTX_4[0,5]
  AJTLoop1[0,1]
    AJT[0,1]
    FTX_5[0,5]
  INPLoop1[0,1]
    INP[0,1]
    FTX_6[0,5]
  LINLoop1[0,9999999]
    LIN[0,1]
    PIA[0,25]
    IMD_2[0,10]
    MEA_3[0,5]
    QTY_3[0,5]
    PCD_3[0,1]
    ALI_3[0,5]
    DTM_13[0,35]
    GIN_2[0,1000]
    GIR_2[0,1000]
    QVR[0,1]
    EQD_2[0,1]
    FTX_7[0,5]
    DGS_2[0,1]
    MOALoop2[0,10]
      MOA_6[0,1]
      CUX_3[0,1]
    PATLoop2[0,10]
      PAT_2[0,1]
      DTM_14[0,5]
      PCD_4[0,1]
      MOA_7[0,1]
    PRILoop1[0,25]
      PRI[0,1]
      CUX_4[0,1]
      APR[0,1]
      RNG_5[0,1]
      DTM_15[0,5]
    RFFLoop5[0,10]
      RFF_7[0,1]
      DTM_16[0,5]
    PACLoop2[0,10]
      PAC_2[0,1]
      MEA_4[0,10]
      EQD_3[0,1]
      PCILoop2[0,10]
        PCI_2[0,1]
        RFF_8[0,1]
        DTM_17[0,5]
        GIN_3[0,10]
    LOCLoop2[0,9999]
      LOC_7[0,1]
      QTY_4[0,100]
      DTM_18[0,5]
    TAXLoop3[0,99]
      TAX_3[0,1]
      MOA_8[0,1]
      LOC_8[0,5]
    NADLoop2[0,99]
      NAD_2[0,1]
      LOC_9[0,5]
      RFFLoop6[0,5]
        RFF_9[0,1]
        DTM_19[0,5]
      DOCLoop2[0,5]
        DOC_2[0,1]
        DTM_20[0,5]
      CTALoop2[0,5]
        CTA_2[0,1]
        COM_2[0,5]
    ALCLoop2[0,30]
      ALC_2[0,1]
      ALI_4[0,5]
      DTM_21[0,5]
      FTX_8[0,1]
      QTYLoop2[0,1]
        QTY_5[0,1]
        RNG_6[0,1]
      PCDLoop2[0,1]
        PCD_5[0,1]
        RNG_7[0,1]
      MOALoop3[0,2]
        MOA_9[0,1]
        RNG_8[0,1]
        CUX_5[0,1]
        DTM_22[0,1]
      RTELoop2[0,1]
        RTE_2[0,1]
        RNG_9[0,1]
      TAXLoop4[0,5]
        TAX_4[0,1]
        MOA_10[0,1]
    TDTLoop2[0,10]
      TDT_2[0,1]
      LOCLoop3[0,10]
        LOC_10[0,1]
        DTM_23[0,5]
    TODLoop2[0,5]
      TOD_2[0,1]
      LOC_11[0,2]
    RCSLoop2[0,100]
      RCS_2[0,1]
      RFF_10[0,5]
      DTM_24[0,5]
      FTX_9[0,5]
    GISLoop1[0,10]
      GIS_2[0,1]
      RFF_11[0,1]
      DTM_25[0,5]
      GIR_3[0,5]
      LOC_12[0,2]
      MEA_5[0,5]
      QTY_6[0,2]
      FTX_10[0,5]
      MOA_11[0,2]
  UNS[0,1]
  CNT[0,10]
  MOALoop4[0,100]
    MOA_12[0,1]
    RFFLoop7[0,1]
      RFF_12[0,1]
      DTM_26[0,5]
  TAXLoop5[0,10]
    TAX_5[0,1]
    MOA_13[0,2]
  ALCLoop3[0,15]
    ALC_3[0,1]
    ALI_5[0,1]
    MOA_14[0,2]
    FTX_11[0,1]
  UNT[0,1]

DisplayXMLInfo Method (VDAValidator Module)

Returns a string showing the structure of the parsed document as XML.

Syntax

• Swift
• Objective-C

public func displayXMLInfo() throws -> String

- (NSString*)displayXMLInfo;

Remarks

After the EDI document has been parsed this method may be called to obtain information about the document structure. The parsed data is represented as XML when queried. This shows all parsed data and may be useful for testing and debugging purposes. For instance: Console.WriteLine(component.DisplayXMLInfo()); Will output text like:

<IX tag="UNB" UNB1="UNOB:1" UNB2="WAYNE_TECH" UNB3="ACME" UNB4="160707:1547" UNB5="000000002" UNB6="" UNB7="1234" UNB8="" UNB9="" UNB10="" UNB11="1">
  <TX tag="UNH" UNH1="509010117" UNH2="INVOIC:D:97A:UN">
    <BGM tag="BGM" BGM01="380:::TAX INVOICE" BGM02="0013550417" BGM03="9"/>
    <DTM tag="DTM" DTM01="3:20070926:102"/>
    <DTM tag="DTM" DTM01="4:20061123:102"/>
    <FTX tag="FTX" FTX01="AAI" FTX02="1"/>
    <TAXLoop1>
      <TAX tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::10072.14" TAX06="S"/>
    </TAXLoop1>
    <CUXLoop1>
      <CUX tag="CUX" CUX01="2:EUR:4" CUX02="" CUX03="0.67529"/>
    </CUXLoop1>
    <PATLoop1>
      <PAT tag="PAT" PAT01="1"/>
      <DTM_6 tag="DTM" DTM01="10:20070926:102"/>
      <PCD tag="PCD" PCD01="2:0:13"/>
    </PATLoop1>
    <LINLoop1>
      <LIN tag="LIN" LIN01="000030" LIN02=""/>
      <PIA tag="PIA" PIA01="1" PIA02="2265S13:BP::92"/>
      <PIA tag="PIA" PIA01="1" PIA02="5029766832002:UP::92"/>
      <IMD_2 tag="IMD" IMD01="F" IMD02=""/>
      <QTY_3 tag="QTY" QTY01="47:50.000:EA"/>
      <DTM_13 tag="DTM" DTM01="11:20070926:102"/>
      <MOALoop2>
        <MOA_6 tag="MOA" MOA01="203:19150.00"/>
      </MOALoop2>
      <PRILoop1>
        <PRI tag="PRI" PRI01="INV:383.00:TU"/>
      </PRILoop1>
      <TAXLoop3>
        <TAX_3 tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::17.500" TAX06="S"/>
        <MOA_8 tag="MOA" MOA01="125:19150.45"/>
      </TAXLoop3>
      <ALCLoop2>
        <ALC_2 tag="ALC" ALC01="C" ALC02="0.45" ALC03="" ALC04="" ALC05="FC"/>
        <MOALoop3>
          <MOA_9 tag="MOA" MOA01="8:0.45"/>
        </MOALoop3>
      </ALCLoop2>
    </LINLoop1>
    <LINLoop1>
      <LIN tag="LIN" LIN01="000040" LIN02=""/>
      <PIA tag="PIA" PIA01="1" PIA02="2269F22:BP::92"/>
      <PIA tag="PIA" PIA01="1" PIA02="5051254078241:UP::92"/>
      <IMD_2 tag="IMD" IMD01="F" IMD02=""/>
      <QTY_3 tag="QTY" QTY01="47:20.000:EA"/>
      <DTM_13 tag="DTM" DTM01="11:20070926:102"/>
      <MOALoop2>
        <MOA_6 tag="MOA" MOA01="203:21060.00"/>
      </MOALoop2>
      <PRILoop1>
        <PRI tag="PRI" PRI01="INV:1053.00:TU"/>
      </PRILoop1>
      <TAXLoop3>
        <TAX_3 tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::17.500" TAX06="S"/>
        <MOA_8 tag="MOA" MOA01="125:21060.50"/>
      </TAXLoop3>
      <ALCLoop2>
        <ALC_2 tag="ALC" ALC01="C" ALC02="0.50" ALC03="" ALC04="" ALC05="FC"/>
        <MOALoop3>
          <MOA_9 tag="MOA" MOA01="8:0.50"/>
        </MOALoop3>
      </ALCLoop2>
    </LINLoop1>
    <LINLoop1>
      <LIN tag="LIN" LIN01="000170" LIN02=""/>
      <PIA tag="PIA" PIA01="1" PIA02="2269F10:BP::92"/>
      <PIA tag="PIA" PIA01="1" PIA02="5051254078326:UP::92"/>
      <IMD_2 tag="IMD" IMD01="F" IMD02=""/>
      <QTY_3 tag="QTY" QTY01="47:10.000:EA"/>
      <DTM_13 tag="DTM" DTM01="11:20070926:102"/>
      <MOALoop2>
        <MOA_6 tag="MOA" MOA01="203:6950.00"/>
      </MOALoop2>
      <PRILoop1>
        <PRI tag="PRI" PRI01="INV:695.00:TU"/>
      </PRILoop1>
      <TAXLoop3>
        <TAX_3 tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::17.500" TAX06="S"/>
        <MOA_8 tag="MOA" MOA01="125:6950.16"/>
      </TAXLoop3>
      <ALCLoop2>
        <ALC_2 tag="ALC" ALC01="C" ALC02="0.16" ALC03="" ALC04="" ALC05="FC"/>
        <MOALoop3>
          <MOA_9 tag="MOA" MOA01="8:0.16"/>
        </MOALoop3>
      </ALCLoop2>
    </LINLoop1>
    <LINLoop1>
      <LIN tag="LIN" LIN01="000190" LIN02=""/>
      <PIA tag="PIA" PIA01="1" PIA02="2269F26:BP::92"/>
      <PIA tag="PIA" PIA01="1" PIA02="5051254051190:UP::92"/>
      <IMD_2 tag="IMD" IMD01="F" IMD02=""/>
      <QTY_3 tag="QTY" QTY01="47:5.000:EA"/>
      <DTM_13 tag="DTM" DTM01="11:20070926:102"/>
      <MOALoop2>
        <MOA_6 tag="MOA" MOA01="203:2375.00"/>
      </MOALoop2>
      <PRILoop1>
        <PRI tag="PRI" PRI01="INV:475.00:TU"/>
      </PRILoop1>
      <TAXLoop3>
        <TAX_3 tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::17.500" TAX06="S"/>
        <MOA_8 tag="MOA" MOA01="125:2375.06"/>
      </TAXLoop3>
      <ALCLoop2>
        <ALC_2 tag="ALC" ALC01="C" ALC02="0.06" ALC03="" ALC04="" ALC05="FC"/>
        <MOALoop3>
          <MOA_9 tag="MOA" MOA01="8:0.06"/>
        </MOALoop3>
      </ALCLoop2>
    </LINLoop1>
    <LINLoop1>
      <LIN tag="LIN" LIN01="000200" LIN02=""/>
      <PIA tag="PIA" PIA01="1" PIA02="2265S24:BP::92"/>
      <PIA tag="PIA" PIA01="1" PIA02="5029766000685:UP::92"/>
      <IMD_2 tag="IMD" IMD01="F" IMD02=""/>
      <QTY_3 tag="QTY" QTY01="47:3.000:EA"/>
      <DTM_13 tag="DTM" DTM01="11:20070926:102"/>
      <MOALoop2>
        <MOA_6 tag="MOA" MOA01="203:957.00"/>
      </MOALoop2>
      <PRILoop1>
        <PRI tag="PRI" PRI01="INV:319.00:TU"/>
      </PRILoop1>
      <TAXLoop3>
        <TAX_3 tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::17.500" TAX06="S"/>
        <MOA_8 tag="MOA" MOA01="125:957.02"/>
      </TAXLoop3>
      <ALCLoop2>
        <ALC_2 tag="ALC" ALC01="C" ALC02="0.02" ALC03="" ALC04="" ALC05="FC"/>
        <MOALoop3>
          <MOA_9 tag="MOA" MOA01="8:0.02"/>
        </MOALoop3>
      </ALCLoop2>
    </LINLoop1>
    <LINLoop1>
      <LIN tag="LIN" LIN01="000210" LIN02=""/>
      <PIA tag="PIA" PIA01="1" PIA02="2263T95:BP::92"/>
      <PIA tag="PIA" PIA01="1" PIA02="5029766699575:UP::92"/>
      <IMD_2 tag="IMD" IMD01="F" IMD02=""/>
      <QTY_3 tag="QTY" QTY01="47:3.000:EA"/>
      <DTM_13 tag="DTM" DTM01="11:20070926:102"/>
      <MOALoop2>
        <MOA_6 tag="MOA" MOA01="203:2085.00"/>
      </MOALoop2>
      <PRILoop1>
        <PRI tag="PRI" PRI01="INV:695.00:TU"/>
      </PRILoop1>
      <TAXLoop3>
        <TAX_3 tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::17.500" TAX06="S"/>
        <MOA_8 tag="MOA" MOA01="125:2085.05"/>
      </TAXLoop3>
      <ALCLoop2>
        <ALC_2 tag="ALC" ALC01="C" ALC02="0.05" ALC03="" ALC04="" ALC05="FC"/>
        <MOALoop3>
          <MOA_9 tag="MOA" MOA01="8:0.05"/>
        </MOALoop3>
      </ALCLoop2>
    </LINLoop1>
    <LINLoop1>
      <LIN tag="LIN" LIN01="000250" LIN02=""/>
      <PIA tag="PIA" PIA01="1" PIA02="2269F15:BP::92"/>
      <PIA tag="PIA" PIA01="1" PIA02="5051254080091:UP::92"/>
      <IMD_2 tag="IMD" IMD01="F" IMD02=""/>
      <QTY_3 tag="QTY" QTY01="47:3.000:EA"/>
      <DTM_13 tag="DTM" DTM01="11:20070926:102"/>
      <MOALoop2>
        <MOA_6 tag="MOA" MOA01="203:4977.00"/>
      </MOALoop2>
      <PRILoop1>
        <PRI tag="PRI" PRI01="INV:1659.00:TU"/>
      </PRILoop1>
      <TAXLoop3>
        <TAX_3 tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::17.500" TAX06="S"/>
        <MOA_8 tag="MOA" MOA01="125:4977.12"/>
      </TAXLoop3>
      <ALCLoop2>
        <ALC_2 tag="ALC" ALC01="C" ALC02="0.12" ALC03="" ALC04="" ALC05="FC"/>
        <MOALoop3>
          <MOA_9 tag="MOA" MOA01="8:0.12"/>
        </MOALoop3>
      </ALCLoop2>
    </LINLoop1>
    <UNS tag="UNS" UNS01="S"/>
    <CNT tag="CNT" CNT01="4:7"/>
    <MOALoop4>
      <MOA_12 tag="MOA" MOA01="9:67627.50"/>
    </MOALoop4>
    <MOALoop4>
      <MOA_12 tag="MOA" MOA01="79:57554.00"/>
    </MOALoop4>
    <TAXLoop5>
      <TAX_5 tag="TAX" TAX01="7" TAX02="VAT" TAX03="" TAX04="" TAX05=":::17.500" TAX06="S"/>
      <MOA_13 tag="MOA" MOA01="125:57555.36:EUR:3"/>
      <MOA_13 tag="MOA" MOA01="124:10072.14:EUR:3"/>
    </TAXLoop5>
    <ALCLoop3>
      <ALC_3 tag="ALC" ALC01="C" ALC02="1.36" ALC03="" ALC04="" ALC05="FC"/>
      <MOA_14 tag="MOA" MOA01="8:1.36"/>
    </ALCLoop3>
  </TX>
</IX>

Flush Method (VDAValidator Module)

Flushes the parser and checks its end state.

Syntax

• Swift
• Objective-C

public func flush() throws -> Void

- (void)flush;

Remarks

When Flush is called, the parser flushes all its buffers, firing events as necessary, and then checks its end state.

Any extra un-parsed data will be populated in the ExtraData property after this method is called.

LoadSchema Method (VDAValidator Module)

Loads a schema file describing a Transaction Set.

Syntax

• Swift
• Objective-C

public func loadSchema(fileName: String) throws -> Void

- (void)loadSchema:(NSString*)fileName;

Remarks

This method parses the File and loads it into an internal schema list. The class will attempt to automatically detect the SchemaFormat.

If the schema file does not exist or cannot be parsed as an EDI schema, the class .

Reset Method (VDAValidator Module)

Resets the parser.

Syntax

• Swift
• Objective-C

public func reset() throws -> Void

- (void)reset;

Remarks

When called, the parser flushes all its buffers, firing events as necessary, and then initializes itself to its default state.

Reset must also be used as signal to the parser that the current stream of text has terminated.

Validate Method (VDAValidator Module)

Validates the specified EDI document.

Syntax

• Swift
• Objective-C

public func validate() throws -> Void

- (void)validate;

Remarks

This method validates the EDI document specified by InputFile or InputData.

Before calling Validate set SchemaFormat and call LoadSchema to load the schema for the document to be validated. The schema defines many validation rules such as minimum and maximum lengths, minimum and maximum occurrences, and more. The validation performed by the class depends largely on the schema's definition.

When the Validate method is called the class will attempt to validate the document. If errors are found during validation the ValidationError event will fire with details about each error as it is encountered. After the document has been validated the ValidationErrors property will be populated with details of each error.

Inspect the ValidationErrors property for information on any errors that were encountered.

Validation Example validator.InputFile = "files/EDIDocuments/MyEDIDoc.txt"; validator.LoadSchema("my_schemas/00501/RSSBus_005010X222A1_837.json"); validator.Validate(); foreach (ValidationErrorDetail error in validator.ValidationErrors) { Console.WriteLine(error.ErrorCode + ": " + error.Message); }

EndFunctionalGroup Event (VDAValidator Module)

Fires whenever a control segment is read that marks the end of an interchange.

Syntax

• Swift
• Objective-C

func onEndFunctionalGroup(tag: String, controlNumber: String, count: Int32, fullSegment: String)

- (void)onEndFunctionalGroup:(NSString*)tag :(NSString*)controlNumber :(int)count :(NSString*)fullSegment;

Remarks

The EndFunctionalGroup event will fire when a control segment marking the end of a functional group is read. The Tag parameter contains the tag of the segment, such as GE. ControlNumber contains the control number associated with the segment, and links this event with the corresponding StartFunctionalGroup event. Count contains the value of the count element included in the closing segment, which identifies the number of transactions in a functional group.

EndInterchange Event (VDAValidator Module)

Fires whenever a control segment is read that marks the end of an interchange.

Syntax

• Swift
• Objective-C

func onEndInterchange(tag: String, controlNumber: String, fullSegment: String)

- (void)onEndInterchange:(NSString*)tag :(NSString*)controlNumber :(NSString*)fullSegment;

Remarks

The EndInterchange event will fire when a control segment marking the end of an interchange is read. The Tag parameter contains the tag of the segment, such as IEA. ControlNumber contains the control number associated with the segment, and links this event with the corresponding StartInterchange event.

EndLoop Event (VDAValidator Module)

Fires when the end of a loop is detected in a transaction set.

Syntax

• Swift
• Objective-C

func onEndLoop()

- (void)onEndLoop;

Remarks

The EndLoop event will fire after the last segment in a loop is read. Each EndLoop event is paired with one StartLoop event.

EndTransaction Event (VDAValidator Module)

Fires whenever a control segment is read that marks the end of a transaction.

Syntax

• Swift
• Objective-C

func onEndTransaction(tag: String, controlNumber: String, count: Int32, fullSegment: String)

- (void)onEndTransaction:(NSString*)tag :(NSString*)controlNumber :(int)count :(NSString*)fullSegment;

Remarks

The EndTransaction event will fire when a control segment marking the end of a transaction is read. The Tag parameter contains the tag of the segment, such as SE. ControlNumber contains the control number associated with the segment, and links this event with the corresponding StartTransaction event. Count contains the value of the count element included in the closing segment, which identifies the number of segments in a transaction set.

Error Event (VDAValidator Module)

Fired when information is available about errors during data delivery.

Syntax

• Swift
• Objective-C

func onError(errorCode: Int32, description: String)

- (void)onError:(int)errorCode :(NSString*)description;

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class .

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

The Error event is fired in case of exceptional conditions during message processing. Normally the class .

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

ResolveSchema Event (VDAValidator Module)

Fires whenever a new transaction set is encountered and no schema is found for it.

Syntax

• Swift
• Objective-C

func onResolveSchema(transactionCode: String, standardVersion: String)

- (void)onResolveSchema:(NSString*)transactionCode :(NSString*)standardVersion;

Remarks

The ResolveSchema event will fire when a the class encounters the header segment of a new transaction set, but it finds no schema corresponding to it already loaded.

TransactionCode contains the code of the transaction, such as "810" or "APERAK".

StandardVersion contains the version of the transaction, such as "004010" or "D95A".

When processing this event, the caller can use LoadSchema() to load a new schema into the class that can be used to parse the transaction.

After the event fires, if the class still doesn't have a matching schema, then it will attempt schema-less parsing of the transaction set.

Segment Event (VDAValidator Module)

Fires whenever a data segment in a transaction set is read.

Syntax

• Swift
• Objective-C

func onSegment(tag: String, name: String, loopName: String, fullSegment: String)

- (void)onSegment:(NSString*)tag :(NSString*)name :(NSString*)loopName :(NSString*)fullSegment;

Remarks

The Segment event will fire when a data segment is read. The Tag parameter contains the tag of the segment. Name contains the name of the segment as defined in the associated transaction set schema. LoopName contains the name of the loop or group this segment is present in (such as N1Loop1).

StartFunctionalGroup Event (VDAValidator Module)

Fires whenever a control segment is read that marks the start of a functional group.

Syntax

• Swift
• Objective-C

func onStartFunctionalGroup(tag: String, controlNumber: String, fullSegment: String)

- (void)onStartFunctionalGroup:(NSString*)tag :(NSString*)controlNumber :(NSString*)fullSegment;

Remarks

The StartFunctionalGroup event will fire when a control segment marking the start of a functional group structure is read. The Tag parameter contains the tag of the segment, such as GS. ControlNumber contains the control number associated with the segment.

StartInterchange Event (VDAValidator Module)

Fires whenever a control segment is read that marks the start of an interchange.

Syntax

• Swift
• Objective-C

func onStartInterchange(tag: String, controlNumber: String, fullSegment: String)

- (void)onStartInterchange:(NSString*)tag :(NSString*)controlNumber :(NSString*)fullSegment;

Remarks

The StartInterchange event will fire when a control segment marking the start of an interchange structure is read. The Tag parameter contains the tag of the segment, such as ISA. ControlNumber contains the control number associated with the segment.

StartLoop Event (VDAValidator Module)

Fires when the starting of a loop is detected in a transaction set.

Syntax

• Swift
• Objective-C

func onStartLoop(name: String)

- (void)onStartLoop:(NSString*)name;

Remarks

The StartLoop event will fire when the tag of a loop trigger segment is read. The Name parameter contains the schema-provided name of the loop, such as "N1Loop1".

StartTransaction Event (VDAValidator Module)

Fires whenever a control segment is read that marks the start of a transaction.

Syntax

• Swift
• Objective-C

func onStartTransaction(tag: String, controlNumber: String, code: String, fullSegment: String)

- (void)onStartTransaction:(NSString*)tag :(NSString*)controlNumber :(NSString*)code :(NSString*)fullSegment;

Remarks

The StartTransaction event will fire when a control segment marking the start of a transaction is read. The Tag parameter contains the tag of the segment, such as ST. ControlNumber contains the control number associated with the segment. Code contains the transaction code (such as 810).

ValidationError Event (VDAValidator Module)

Fires whenever a validation error is encountered.

Syntax

• Swift
• Objective-C

func onValidationError(errorCode: Int32, message: String, segmentNumber: Int32, segmentTag: String, technicalErrorCode: String, segmentErrorCode: String, elementErrorCode: String, elementPosition: Int32, line: Int32, column: Int32)

- (void)onValidationError:(int)errorCode :(NSString*)message :(int)segmentNumber :(NSString*)segmentTag :(NSString*)technicalErrorCode :(NSString*)segmentErrorCode :(NSString*)elementErrorCode :(int)elementPosition :(int)line :(int)column;

Remarks

This event will fire with errors as the EDI document is validated. The ErrorCode parameter contains the type of error encountered. Message is a textual description of the problem. SegmentNumber is the index of the segment where the problem was found. SegmentTag holds the tag name of the segment. ElementPosition is the position of the element where the error occurred.

The Line and Column parameters identify the location within the EDI document where the error occurred.

Possible ErrorCode values are:

X12 Specific Parameters

The following parameters are available in all validator classes but are only applicable to X12 document validation at this time.

SegmentErrorCode holds the error code that may be used in the IK304 field of a 999. ElementErrorCode holds the error code that may be used in the IK403 field of a 999.

TechnicalErrorCode holds a technical error code that helps identify structural issues with the document. For instance when parsing an X12 document this will hold values that may be used for TA1 error codes. When parsing X12 documents the following codes are applicable:

ValidationErrorDetail Type

Details of the validation error.

Remarks

After Validate is called the ValidationErrors property is populated with details of each error that was encountered. Examine the fields for specific information on the type of error encountered.

Fields

Config Settings (VDAValidator Module)

X12Validator Config Settings

Base Config Settings

Trappable Errors (VDAValidator Module)

X12Validator Errors