EzShip Configuration

This returns the complete request as sent to the server. Used for debugging purposes.

This returns the complete response as received from the server. Used for debugging purposes.

XPath implements a subset of the XML XPath specification, allowing you to point to specific elements in the XML-formatted RawResponse.

The path is a series of one or more element accessors separated by '/'. The path can be absolute (starting with '/') or relative to the current XPath location.

The following are possible values for an element accessor:

When XPath is set to a valid path, the text contained at that element (if any) is returned. If there is no value present, or the xpath is invalid, and empty string ("") will be returned.

This is applicable to CSP developers only. When registering a CSP user, FedEx provides a unique CSPUserKey and CSPUserPassword that identifies that user.

This end user key and password inherits the services enabled for the CSP credentials and must be passed in all subsequent requests sent to FedEx Web Services as the part of the user authentication along with the provider's (CSP) key and password (FedExDeveloperKey and FedExPassword respectively).

This is applicable to CSP developers only. When registering a CSP user, FedEx provides a unique CSPUserKey and CSPUserPassword that identifies that user.

This end user key and password inherits the services enabled for the CSP credentials and must be passed in all subsequent requests sent to FedEx Web Services as the part of the user authentication along with the provider's (CSP) key and password (FedExDeveloperKey and FedExPassword respectively).

This is applicable to CSP developers only. This is provided by FedEx to the CSP developers and it is required to be present in all requests as part of the user details along with the FedExAccountNumber, FedExMeterNumber and CSPProductVersion.

This is applicable to CSP developers only. This is provided by FedEx to the CSP developers and it is required to be present in all requests as part of the user details along with the FedExAccountNumber, FedExMeterNumber and CSPProductId.

For Endicia requests, this is a unique Id for the partner's end-user that is printing the label.

For Delivery and Signature confirmation, the USPS Server may return either an entire label with the 'To' and 'From' address and the confirmation barcode, or a label with only the barcode and tracking number may be returned. Label options 1 and 2 are available for both Delivery Confirmation labels and Signature Confirmation labels. Detailed descriptions of these label options are included below.

This will determine which type of insurance will be used when requesting a label through Endicia.

Note that if this is set to None, and an insurance amount is provided, Endicia Insurance will be used.

When set to False, Endicia mailpiece insurance will not be requested. This can be applicable when generating Endicia COD labels.

When PackageInsuredValue is set, the default value for this configuration setting is True.

When set to 0 (None), the component will communicate with USPS servers to get rates and print labels. USPS web services do not provide postage.

If postage is necessary, set this property to 1 (Endicia) to use Endicia's web services which provides postage. In order to use this provider, an Endicia account must be set up through their website.

Once you have an Endicia USPSAccountNumber, you should also have obtained a USPSUserId and USPSPassword uniquely assigned to your account by Endicia. These values are all necessary to get rates and shipping labels through their web services.

When this is set to 1 (Endicia) you must also set CustomerId and TransactionId.

This property is only used for Endicia labels, and is defined as a unique Id for the partner's end-user's transaction. This can be an invoice number or transaction number.

This indicates customer's input COD amount (prior to any accumulations: total collection amount minus transportation charges). The CODTotalAmount is required to be provided in a ship request only if the corresponding flag of COD is contained in the ShipmentSpecialServices property.

For FedEx this will only be used if COD is used on the shipment level with an Express shipment.

Format: Two explicit decimals (e.g.5.00).

Note: This value is only used when the Provider is set to pCanadaPost or pFedEx

This config identifies the type of funds should be collected upon delivery of the shipment. It is required to be provided in a ship request only if the COD is present (requested) in the ShipmentSpecialServices.

Possible values are as follows:

Note: This value is only used when the Provider is set to pCanadaPost or pFedEx

If CODLabelFile is not set the image for the COD label this will be used to store the COD label.

For FedEx this will only be used if COD is used on the shipment level with an Express shipment.

Note: This value is only used when the Provider is set to pCanadaPost or pFedEx

The COD label will be written to the file specified. If no file is specified then the image will be stored in memory in CODLabel.

For FedEx this will only be used if COD is used on the shipment level with an Express shipment.

Note: This value is only used when the Provider is set to pCanadaPost or pFedEx

When your Hold at Location shipment is received at the designated FedEx station, you will be notified that your shipment is ready to be picked up. It is required to be provided in a HoldAtLocation request.

Note: This value is only used when the Provider is set to pFedEx

The following FedEx services allow the HAL option:

• FedEx Priority Overnight (Saturday Service available)
• FedEx Standard Overnight
• FedEx 2Day (Saturday Service available)
• FedEx Express Saver
• FedEx Express Freight (U.S. only; Saturday Service is not available)
• FedEx International Priority

Valid physical address of the FedEx location. Combination of HoldAtLocationAddress1 and HoldAtLocationAddress2 should not exceed 35 characters.

Note: This value is only used when the Provider is set to pFedEx

A specific detail on the address (such as building, suite, apartment, floor number etc.). This is optional. Combination of HoldAtLocationAddress1 and HoldAtLocationAddress2 should not exceed 35 characters.

Note: This value is only used when the Provider is set to pFedEx

Name of city of FedEx location. This is required.

Note: This value is only used when the Provider is set to pFedEx

Here is a list of country names and their codes. Code is the value that has to be provided in all hold requests sent where country code is to be entered.

Note: This value is only used when the Provider is set to pFedEx

State or province code of the FedEx location. This is the identifying abbreviation for US state, Canada province, etc. This is required.

Note: This value is only used when the Provider is set to pFedEx

Postal code. This is identification of a region (usually small) for mail/package delivery. Format and presence of this configuration setting will vary, depending on country. This configuration setting is required if both HoldAtLocationCity and HoldAtLocationState are provided.

Note: This value is only used when the Provider is set to pFedEx

When the shipment arrives at the FedEx location where the shipment will be held, FedEx will notify the company specified here.

Note: This value is only used when the Provider is set to pFedEx

Identifies the contact person's email address. Maximum length: 120.

Note: This value is only used when the Provider is set to pFedEx

Identifies the contact person's first name. Maximum length: 45 characters for both HoldAtLocationContactFirstName and HoldAtLocationContactLastName or HoldAtLocationContactCompany

Note: This value is only used when the Provider is set to pFedEx

Identifies the contact person's last name. Maximum length: 45 characters for both HoldAtLocationContactFirstName and HoldAtLocationContactLastName or HoldAtLocationContactCompany

Note: This value is only used when the Provider is set to pFedEx

Identifies the contact person's fax number. The value of this configuration setting is optional. No format checking is done on international fax numbers.

Note: This value is only used when the Provider is set to pFedEx

Identifies the contact person's phone number. Maximum length: 45.

Note: This value is only used when the Provider is set to pFedEx

Identifies the contact person's middle initial. The value of this configuration setting is optional..

Note: This value is only used when the Provider is set to pFedEx

This field is used to specify the postal code of the client sending location to determine the nearest Post Office (this information is used for pricing). To force selection of a particular Post Office, the postal code of the desired Post Office should be used.

Note: This value is only used when a CanadaContractId is specified. Also this is only valid when Provider is set to pCanadaPost

This field is used to specify the Group ID number or name to place a created shipment when using Canada Post. If the specified group does not exist, it will be created automatically by the Canada Post service.

Note: This value is only used when a CanadaContractId is specified. Also this is only valid when Provider is set to pCanadaPost

This field is used to specify the intended method of payment when shipping via Canada Post.

The available values are:

Note: This value is only used when a CanadaContractId is specified. Also this is only valid when Provider is set to pCanadaPost

When AllowHTTPCompression is true, the component adds an "Accept-Encoding: " header to the request being sent to the server. By default, this header's value is "gzip, deflate". This config allows you to change the value of the "Accept-Encoding" header. NOTE: The component only supports gzip and deflate decompression algorithms.

This is the same as the AllowHTTPCompression property. This setting is exposed here for use by components that inherit from HTTP.

By default the component does not allow redirects to the same URL to avoid redirect loops. In some cases the server may intentionally redirect the client back to the same URL. In that case this setting may be set to True to allow the redirect to be followed. The default value is False.

This setting determines whether data is appended when writing to LocalFile. When set to True downloaded data will be appended to LocalFile. This may be used in conjunction with Range to resume a failed download. This is only applicable when LocalFile is set. The default value is False.

If the Authorization property contains a non-empty string, an Authorization HTTP request header is added to the request. This header conveys Authorization information to the server.

This property is provided so that the HTTP component can be extended with other security schemes in addition to the authorization schemes already implemented by the component.

The AuthScheme property defines the authentication scheme used. In the case of HTTP Basic Authentication (default), every time User and Password are set, they are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]".

Returns the raw number of bytes from the HTTP response data, prior to the component processing the data, whether it is chunked and/or compressed. This returns the same value as the Transfer event, by BytesTransferred.

The default value is false. If set to true the URL passed to the component will be URL encoded.

This option determines what happens when the server issues a redirect. Normally, the component returns an error if the server responds with an "Object Moved" message. If this property is set to 1 (always), the new URL for the object is retrieved automatically every time.

If this property is set to 2 (Same Scheme), the new URL is retrieved automatically only if the URL Scheme is the same, otherwise the component raises an exception.

Note that following the HTTP specification, unless this option is set to 1 (Always), automatic redirects will be performed only for 'GET' or 'HEAD' requests. Other methods could potentially change the conditions of the initial request and create security vulnerabilities.

Furthermore, if either the new URL server and port are different than the existing one, User and Password are also reset to empty, unless this property is set to 1 (Always), in which case the same credentials are used to connect to the new server.

A Redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the Redirect event is a good place to set properties related to the new connection (e.g. new authentication parameters).

The default value is 0 (Never). In this case, redirects are never followed, and the component raises an exception instead.

Valid options are:

• 0 - Never
• 1 - Always
• 2 - Same Scheme

The default value is false. If set to true the component will perform a GET on the new location. Otherwise it will use the same HTTP method again.

Possible values include "1.0", and "1.1". The default is "1.1".

This is the same as the IfModifiedSince property. This setting is exposed here for use by components that inherit from HTTP.

If true, the component will not send the 'Connection: Close' header. The absence of the Connection header indicates to the server that HTTP persistent connections should be used if supported. Note that not all server support persistent connections. You may also explicitly add the Keep-Alive header to the request headers by setting OtherHeaders to 'Connection: Keep-Alive'. If false, the connection will be closed immediately after the server response is received.

The default value for KeepAlive is false.

When FollowRedirects is set to any value besides frNever the component will follow redirects until this maximum number of redirect attempts are made. The default value is 20.

This configuration option can be set to a string of headers to be appended to the HTTP request headers.

The headers must be of the format "header: value" as described in the HTTP specifications. Header lines should be separated by CRLF ("\r\ n") .

Use this configuration option with caution. If this configuration option contains invalid headers, HTTP requests may fail.

This configuration option is useful for extending the functionality of the component beyond what is provided.

Similar to the Authorization config, but for proxy authorization. If this config contains a non-empty string, a Proxy-Authorization HTTP request header is added to the request. This header conveys proxy authorization information to the server. If ProxyUser and ProxyPassword are specified, this value is calculated using the algorithm specified by ProxyAuthScheme.

This is the same as ProxyAuthScheme. This setting is provided for use by components that do not directly expose Proxy properties.

This is the same as ProxyPassword. This setting is provided for use by components that do not directly expose Proxy properties.

This is the same as ProxyPort. This setting is provided for use by components that do not directly expose Proxy properties.

This is the same as ProxyServer. This setting is provided for use by components that do not directly expose Proxy properties.

This is the same as ProxyUser. This setting is provided for use by components that do not directly expose Proxy properties.

If TransferredDataLimit is set to 0 (default), no limits are imposed. Otherwise this reflects the maximum number of incoming bytes that can be stored by the component.

This configuration setting returns the complete set of raw headers as received from the server.

If UseChunkedEncoding is set to true, the component will use HTTP chunked encoding when posting if possible. HTTP chunked encoding allows large files to be sent in chunks instead of all at once. If set to false, the component will not use HTTP chunked encoding. The default value is false.

Note: Some servers (such as the ASP.NET Development Server) may not support chunked encoding.

This is only applicable when UseChunkedEncoding is true. This setting specifies the chunk size in bytes to be used when posting data. The default value is 16384.

This is the value supplied in the HTTP User-Agent header. The default setting is "/n software IPWorks HTTP/S Component - www.nsoftware.com".

Override the default with the name and version of your software.

If the Service Principal Name on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, the Service Principal Name should be set here.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the component will use Timeout for establishing a connection and transmitting/receiving data.

This is the same as FirewallAutoDetect. This setting is provided for use by components that do not directly expose Firewall properties.

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

NOTE: This is the same as FirewallHost. This setting is provided for use by components that do not directly expose Firewall properties.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.

NOTE: This is the same as FirewallPassword. This setting is provided for use by components that do not directly expose Firewall properties.

Note that the FirewallPort is set automatically when FirewallType is set to a valid value.

NOTE: This is the same as FirewallPort. This setting is provided for use by components that do not directly expose Firewall properties.

The appropriate values are as follows:

NOTE: This is the same as FirewallType. This setting is provided for use by components that do not directly expose Firewall properties.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the component raises an exception.

NOTE: This is the same as FirewallUser. This setting is provided for use by components that do not directly expose Firewall properties.

When set, TCPKeepAlive will automatically be set to true. By default the operating system will determine the time a connection is idle before a TCP keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Note: This value is not applicable in Java.

When set, TCPKeepAlive will automatically be set to true. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgement is received from the remote host the keep-alive packet will be re-sent. This setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in Java or MAC.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), there are two scenarios for determining how long the connection will linger. The first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP protocol timeout expires.

In the second scenario, LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the component returns control immediately, the system could hold system resources until all pending data is sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (by a client acknowledgment, for example), setting this property to False might be the appropriate course of action.

LingerTime is the time, in seconds, to leave the socket connection linger. This value is 0 by default, which means it will use the default IP protocol timeout.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the component initiate connections (or accept in the case of server components) only through that interface.

If the component is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

This must be set before a connection is attempted. It instructs the component to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes. The maximum value is 65536 bytes.

This setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default this is not set and there is no limit.

If set to a positive value, this setting defines the length of data records to be received. The component will accumulate data until RecordLength is reached and only then fire the DataIn event with data of length RecordLength. This allows data to be received as records of known length. This value can be changed at any time, including within the DataIn event.

The default value is 0, meaning this setting is not used.

If set to true, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

When set to 0 (default), the component will use IPv4 exclusively. When set to 1, the component will use IPv6 exclusively. To instruct the component to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are:

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

If set to true, the component will reuse the context if and only if the following criteria are met:

• The target host name is the same.
• The system cache entry has not expired (default timeout is 10 hours).
• The application process that calls the function is the same.
• The logon session is the same.
• The instance of the component is the same.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting.

TLS 1.1 and TLS1.2 support are only available starting with Windows 7.

Change this setting to use security providers other than the system default.

Use this setting with caution. Disabling SSL security or pointing to the wrong provider could potentially cause serious security vulnerabilities in your application.

The special value "*" (default) picks the default SSL provider defined in the system.

Note: On Windows systems, the default SSL Provider is "Microsoft Unified Security Protocol Provider" and cannot be changed.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:

This functionality is currently not available when the provider is OpenSSL.

This functionality is available only when the provider is OpenSSL.

The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g. 9d66eef0.0, 9d66eef0.1 etc). OpenSSL recommends to use the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

This functionality is available only when the provider is OpenSSL.

The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by

-----BEGIN CERTIFICATE-----

... (CA certificate in base64 encoding) ...

-----END CERTIFICATE-----

sequences. Before, between, and after the certificates text is allowed which can be used e.g. for descriptions of the certificates. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

This functionality is available only when the provider is OpenSSL.

The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".

This functionality is available only when the provider is OpenSSL.

By default OpenSSL uses the device file "/dev/urandom" to seed the PRNG and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for UDP ports.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes).

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

The default code page is the Active Code Page (0).

The following is a list of valid code page identifiers:

The following is a list of valid code page identifiers for Mac OS only: