FedExFreightRates Configuration

This returns the complete request as sent to the server. Used for debugging purposes.

This returns the complete response as received from the server. Used for debugging purposes.

XPath implements a subset of the XML XPath specification, allowing you to point to specific elements in the XML-formatted RawResponse.

The path is a series of one or more element accessors separated by '/'. The path can be absolute (starting with '/') or relative to the current XPath location.

The following are possible values for an element accessor:

When XPath is set to a valid path, the text contained at that element (if any) is returned. If there is no value present, or the xpath is invalid, and empty string ("") will be returned.

This might be returned by the server even upon successful response. These warnings are usually informational.

This is applicable to CSP developers only. When registering a CSP user, FedEx provides a unique CSPUserKey and CSPUserPassword that identifies that user.

This end user key and password inherits the services enabled for the CSP credentials and must be passed in all subsequent requests sent to FedEx Web Services as the part of the user authentication along with the provider's (CSP) key and password (FedExDeveloperKey and FedExPassword respectively).

This is applicable to CSP developers only. When registering a CSP user, FedEx provides a unique CSPUserKey and CSPUserPassword that identifies that user.

This end user key and password inherits the services enabled for the CSP credentials and must be passed in all subsequent requests sent to FedEx Web Services as the part of the user authentication along with the provider's (CSP) key and password (FedExDeveloperKey and FedExPassword respectively).

This is applicable to CSP developers only. This is provided by FedEx to the CSP developers and it is required to be present in all requests as part of the user details along with the FedExAccountNumber, FedExMeterNumber and CSPProductVersion.

This is applicable to CSP developers only. This is provided by FedEx to the CSP developers and it is required to be present in all requests as part of the user details along with the FedExAccountNumber, FedExMeterNumber and CSPProductId.

If True (default), the class will use the FedEx SOAP based web services. When using the SOAP based web services the FedExServer should end in "web-services". For instance: "https://gatewaybeta.fedex.com:443/web-services".

If False, the class will use the FedEx XML based web services. When using the XML based web services the FedExServer should end in "xml". For instance: "https://gatewaybeta.fedex.com:443/xml".

FedEx allows you to add customizable content on select label types. FedEx requires that the customizable graphic or text must not exceed 1-1/2 inches high and 4-1/2 inches wide. You must insert the XML necessary to display your graphic or text. For example if you wanted to add some custom text to the label you would do something like this:

string customContent = "CustomContent=<CustomContent><TextEntries><Position><X>150</X><Y>70</Y></Position><Format>My text here</Format><ThermalFontId>2</ThermalFontId></TextEntries></CustomContent>"

When using the CustomContent, the LabelStockType must be either 4 (Stock 4x8) or 5 (Stock 4x9 Leading Doc Tab). Also LabelFormatType must be 0 (Common2D) and LabelImageType must 2 (fitEltron), 3 (fitZebra) or 4 (fitUniMark).

The reference information to be added to the COD return label.

Possible values are:

This specifies the number of packages in the shipment which contain dry ice. This is used in conjunction with PackageDryIceWeight when DryIce is present (requested) in the ShipmentSpecialServices.

This is required to be provided in a ship request when shipping Dry Ice (i.e., when the corresponding flag for DryIce is present (requested) in the ShipmentSpecialServices). Dry ice shipping is allowed for FedEx Express services only (U.S. domestic, intra-Canadian, and FedEx Express International shipments). FedEx assesses a surcharge on each package containing dry ice. Dry ice weight cannot be greater than the package weight. The dry ice weight type is KGS only. There is a limit of 2.5 KG dry ice for destination.

NOTE: The weight will always be specified in KG.

Declares the type of size units to be used in calculating the size of the shipment and each package contained in it. This is required if package dimensions are passed in the request.

Valid dimension unit of measure codes: IN and CM. Defaults to IN if a value is not passed in the transaction.

This is required when submitting a rate or ship request. It declares the type of weight unit to be used in calculating the weight of the shipment and each package contained in it.

Valid weight types: LB and KG. Defaults to LB if a value is not passed in the transaction. It must be LB for a U.S. Domestic rate quote or ship request.

This optional field identifies the preferred currency of the requestor.

When dynamic currency conversion is performed by FedEx, this specifies the currency from which the value was converted. This is applicable to account based (discounted) rates.

When dynamic currency conversion is performed by FedEx, this specifies the currency to which the value was converted. This is applicable to account based (discounted) rates.

When dynamic currency conversion is performed by FedEx, this specifies the exchange rate used to convert the currency from AccountFromCurrency to AccountIntoCurrency. This is applicable to account based (discounted) rates.

When dynamic currency conversion is performed by FedEx, this specifies the currency from which the value was converted. This is applicable to list rates.

When dynamic currency conversion is performed by FedEx, this specifies the currency to which the value was converted. This is applicable to list rates.

When dynamic currency conversion is performed by FedEx, this specifies the exchange rate used to convert the currency from ListFromCurrency to ListIntoCurrency. This is applicable to list rates.

Set this config to specify the endorsement type used for a FedEx SmartPost shipment. This is optional when using FedEx SmartPost service.

The applicable values include the following:

Set this config to specify the Customer Manifest Id which is used to group FedEx SmartPost packages onto a manifest for each trailer that is being prepared. You must assign a unique Manifest Id to each FedEx SmartPost package, when you have multiple trailers. If you have a single trailer, then this config is optional. The Manifest Id must be unique to your account number for a minimum of six months and cannot exceed eight characters in length.

When you want to ship packages via FedEx SmartPost, you will have to specify the SmartPostHubId. By setting this, the server will consider your shipment as a SmartPost one. ServiceType will automatically be set to the correct value when this is specified.

SmartPost cannot be enabled via Web Support. You will need to contact your local Account Executive to enable SmartPost for your account. Depending on the zip code associated with your account, they can also provide you with the correct Hub Id for production. This config should only be set using the numeric Hub Id value. For example, to set the Hub Id for Charlotte area: ship.Config("SmartPostHubId=5281"). In regards to test, you should be able to test your transactions by supplying a dummy Hub Id of 5531.

Note: SmartPost ships via FedEx using FedEx Ground. The only available packaging type for Ground is 'Your Packaging', so SmartPost can only use this as packaging type, and the package dimensions are required to be entered in the request as well. The package weight limitations depend on the value of SmartPostIndicia which is also required to be provided in the request.

Set this config to specify the Indicia type used for a FedEx SmartPost shipment. This is required when using FedEx SmartPost service.

The applicable values include the following:

This is the account number to be used with a freight shipment. This is required when submitting a freight shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the name of the person listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the name of the company listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the phone number listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the fax number listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the email address listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the first address line listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the second address line listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the city listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the state listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the country code listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the zip code listed on the account associated with the FreightAccountNumber. This is used for validating FedEx Freight account number and (optionally) identifying third party payment on the bill of lading.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the alternate account number to be billed. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the name of the person associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the name of the company associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the street address associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the city associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the state associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the country code associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the zip code associated with the account number set in FreightAlternateBillingAccountNumber. This is used in connection with Send Bill To (SBT) identification of customer's account used for billing.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

The estimated client discount rate for a freight shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This sets the terms for how to collect payment for this freight shipment. Default value is 0.

Valid values are as follows:

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

The description for this freight shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

The total declared value per unit for this freight shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Identifies the declared value units corresponding to the above defined declared value.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

If this shipment contains hazardous materials, this should contain the offeror of the hazardous materials.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the total value of the liability coverage.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the type of liability coverage offered.

Valid values are as follows:

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should contain the total weight of all pallets used in this freight shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This indicates which party is submitting the transaction for this freight shipment.

Valid values are as follows:

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the total length of the shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the total width of the shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the total height of the shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

Total number of individual handling units in the entire shipment (for unit pricing).

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This contains the number of commodity items in the freight shipment.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should be set to the freight class for this item.

The valid values are as follows:

• 50
• 55
• 60
• 65
• 70
• 77.5
• 85
• 92.5
• 100
• 110
• 125
• 150
• 175
• 200
• 250
• 300
• 400
• 500

Valid array indices are from 0 to FreightItemCount - 1.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

The physical packaging type for this freight item.

The valid values are as follows:

Valid array indices are from 0 to FreightItemCount - 1.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should contain a description of what the freight item is.

Valid array indices are from 0 to FreightItemCount - 1.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should contain the total weight of the freight item.

Valid array indices are from 0 to FreightItemCount - 1.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should contain the length of the freight item.

Valid array indices are from 0 to FreightItemCount - 1.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should contain the height of the freight item.

Valid array indices are from 0 to FreightItemCount - 1.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should contain the width of the freight item.

Valid array indices are from 0 to FreightItemCount - 1.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

This should contain the volume of the freight item. This should be specified in cubic feet if SizeUnit is set to IN and cubic meters if SizeUnit is set to CM.

Valid array indices are from 0 to FreightItemCount - 1.

This only applies when using the FedExFreightEconomy and FedExFreightPriority services.

When AllowHTTPCompression is true, the class adds an "Accept-Encoding: " header to the request being sent to the server. By default, this header's value is "gzip, deflate". This config allows you to change the value of the "Accept-Encoding" header. NOTE: The class only supports gzip and deflate decompression algorithms.

This is the same as the AllowHTTPCompression property. This setting is exposed here for use by classs that inherit from HTTP.

By default the class does not allow redirects to the same URL to avoid redirect loops. In some cases the server may intentionally redirect the client back to the same URL. In that case this setting may be set to True to allow the redirect to be followed. The default value is False.

This setting determines whether data is appended when writing to LocalFile. When set to True downloaded data will be appended to LocalFile. This may be used in conjunction with Range to resume a failed download. This is only applicable when LocalFile is set. The default value is False.

If the Authorization property contains a non-empty string, an Authorization HTTP request header is added to the request. This header conveys Authorization information to the server.

This property is provided so that the HTTP class can be extended with other security schemes in addition to the authorization schemes already implemented by the class.

The AuthScheme property defines the authentication scheme used. In the case of HTTP Basic Authentication (default), every time User and Password are set, they are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]".

Returns the raw number of bytes from the HTTP response data, prior to the component processing the data, whether it is chunked and/or compressed. This returns the same value as the Transfer event, by BytesTransferred.

The default value is false. If set to true the URL passed to the class will be URL encoded.

This option determines what happens when the server issues a redirect. Normally, the class returns an error if the server responds with an "Object Moved" message. If this property is set to 1 (always), the new URL for the object is retrieved automatically every time.

If this property is set to 2 (Same Scheme), the new URL is retrieved automatically only if the URL Scheme is the same, otherwise the class fails with an error.

Note that following the HTTP specification, unless this option is set to 1 (Always), automatic redirects will be performed only for 'GET' or 'HEAD' requests. Other methods could potentially change the conditions of the initial request and create security vulnerabilities.

Furthermore, if either the new URL server and port are different than the existing one, User and Password are also reset to empty, unless this property is set to 1 (Always), in which case the same credentials are used to connect to the new server.

A Redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the Redirect event is a good place to set properties related to the new connection (e.g. new authentication parameters).

The default value is 0 (Never). In this case, redirects are never followed, and the class fails with an error instead.

Valid options are:

• 0 - Never
• 1 - Always
• 2 - Same Scheme

The default value is false. If set to true the class will perform a GET on the new location. Otherwise it will use the same HTTP method again.

Possible values include "1.0", and "1.1". The default is "1.1".

This is the same as the IfModifiedSince property. This setting is exposed here for use by classs that inherit from HTTP.

If true, the component will not send the 'Connection: Close' header. The absence of the Connection header indicates to the server that HTTP persistent connections should be used if supported. Note that not all server support persistent connections. You may also explicitly add the Keep-Alive header to the request headers by setting OtherHeaders to 'Connection: Keep-Alive'. If false, the connection will be closed immediately after the server response is received.

The default value for KeepAlive is false.

When FollowRedirects is set to any value besides frNever the class will follow redirects until this maximum number of redirect attempts are made. The default value is 20.

This configuration option can be set to a string of headers to be appended to the HTTP request headers.

The headers must be of the format "header: value" as described in the HTTP specifications. Header lines should be separated by CRLF ("\r\ n") .

Use this configuration option with caution. If this configuration option contains invalid headers, HTTP requests may fail.

This configuration option is useful for extending the functionality of the class beyond what is provided.

Similar to the Authorization config, but for proxy authorization. If this config contains a non-empty string, a Proxy-Authorization HTTP request header is added to the request. This header conveys proxy authorization information to the server. If ProxyUser and ProxyPassword are specified, this value is calculated using the algorithm specified by ProxyAuthScheme.

This is the same as ProxyAuthScheme. This setting is provided for use by classs that do not directly expose Proxy properties.

This is the same as ProxyPassword. This setting is provided for use by classs that do not directly expose Proxy properties.

This is the same as ProxyPort. This setting is provided for use by classs that do not directly expose Proxy properties.

This is the same as ProxyServer. This setting is provided for use by classs that do not directly expose Proxy properties.

This is the same as ProxyUser. This setting is provided for use by classs that do not directly expose Proxy properties.

If TransferredDataLimit is set to 0 (default), no limits are imposed. Otherwise this reflects the maximum number of incoming bytes that can be stored by the class.

This configuration setting returns the complete set of raw headers as received from the server.

If UseChunkedEncoding is set to true, the class will use HTTP chunked encoding when posting if possible. HTTP chunked encoding allows large files to be sent in chunks instead of all at once. If set to false, the class will not use HTTP chunked encoding. The default value is false.

Note: Some servers (such as the ASP.NET Development Server) may not support chunked encoding.

This is only applicable when UseChunkedEncoding is true. This setting specifies the chunk size in bytes to be used when posting data. The default value is 16384.

If True, the component will use the default HTTP client for the platform (URLConnection in Java, WebRequest in .NET, or CFHTTPMessage in Mac/iOS) instead of the internal HTTP implementation. This is important for environments where direct access to sockets is limited or not allowed (as in the Google AppEngine for instance).

Note: This setting is only applicable to Mac/iOS editions.

This is the value supplied in the HTTP User-Agent header. The default setting is "/n software IPWorks HTTP/S Component - www.nsoftware.com".

Override the default with the name and version of your software.

If the Service Principal Name on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, the Service Principal Name should be set here.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the class will use Timeout for establishing a connection and transmitting/receiving data.

This is the same as FirewallAutoDetect. This setting is provided for use by classs that do not directly expose Firewall properties.

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

NOTE: This is the same as FirewallHost. This setting is provided for use by classs that do not directly expose Firewall properties.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the class fails with an error.

NOTE: This is the same as FirewallPassword. This setting is provided for use by classs that do not directly expose Firewall properties.

Note that the FirewallPort is set automatically when FirewallType is set to a valid value.

NOTE: This is the same as FirewallPort. This setting is provided for use by classs that do not directly expose Firewall properties.

The appropriate values are as follows:

NOTE: This is the same as FirewallType. This setting is provided for use by classs that do not directly expose Firewall properties.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the class fails with an error.

NOTE: This is the same as FirewallUser. This setting is provided for use by classs that do not directly expose Firewall properties.

When set, TCPKeepAlive will automatically be set to true. By default the operating system will determine the time a connection is idle before a TCP keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Note: This value is not applicable in Java.

When set, TCPKeepAlive will automatically be set to true. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgement is received from the remote host the keep-alive packet will be re-sent. This setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in Java or MAC.

When set, TCPKeepAlive will automatically be set to true. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgement is received from the remote host the keep-alive packet will be re-sent. This setting specifies the number of times that the keep-alive packets will be re-sent before the remote host is considered disconnected. The system default if this value is not specified here is 9.

Note: This configuration setting is only available in the Unix platform, and isn't supported in Mac OS or FreeBSD.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), there are two scenarios for determining how long the connection will linger. The first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP protocol timeout expires.

In the second scenario, LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the class returns control immediately, the system could hold system resources until all pending data is sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (by a client acknowledgment, for example), setting this property to False might be the appropriate course of action.

LingerTime is the time, in seconds, to leave the socket connection linger. This value is 0 by default, which means it will use the default IP protocol timeout.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

This must be set before a connection is attempted. It instructs the class to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes. The maximum value is 65536 bytes.

This setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default this is not set and there is no limit.

If set to a positive value, this setting defines the length of data records to be received. The class will accumulate data until RecordLength is reached and only then fire the DataIn event with data of length RecordLength. This allows data to be received as records of known length. This value can be changed at any time, including within the DataIn event.

The default value is 0, meaning this setting is not used.

If set to true, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

When set to 0 (default), the class will use IPv4 exclusively. When set to 1, the class will use IPv6 exclusively. To instruct the class to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are:

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

If set to true, the component will reuse the context if and only if the following criteria are met:

• The target host name is the same.
• The system cache entry has not expired (default timeout is 10 hours).
• The application process that calls the function is the same.
• The logon session is the same.
• The instance of the component is the same.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting.

TLS 1.1 and TLS1.2 support are only available starting with Windows 7.

Change this setting to use security providers other than the system default.

Use this setting with caution. Disabling SSL security or pointing to the wrong provider could potentially cause serious security vulnerabilities in your application.

The special value "*" (default) picks the default SSL provider defined in the system.

Note: On Windows systems, the default SSL Provider is "Microsoft Unified Security Protocol Provider" and cannot be changed.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:

This functionality is currently not available when the provider is OpenSSL.

This functionality is available only when the provider is OpenSSL.

The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g. 9d66eef0.0, 9d66eef0.1 etc). OpenSSL recommends to use the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

This functionality is available only when the provider is OpenSSL.

The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by

-----BEGIN CERTIFICATE-----

... (CA certificate in base64 encoding) ...

-----END CERTIFICATE-----

sequences. Before, between, and after the certificates text is allowed which can be used e.g. for descriptions of the certificates. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

This functionality is available only when the provider is OpenSSL.

The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".

This functionality is available only when the provider is OpenSSL.

By default OpenSSL uses the device file "/dev/urandom" to seed the PRNG and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for UDP ports.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes).

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

If there are no events to process when DoEvents is called, the class will wait for the amount of time specified here before returning. The default value is 20.

The default code page is the Active Code Page (0).

The following is a list of valid code page identifiers:

The following is a list of valid code page identifiers for Mac OS only: