This setting specifies the format of the datetime used when reporting the file's modified date. The default value is "yyyy-MM-dd'T'HH:mm:ss" and the server time will be localized.

If this setting is set to empty string the exact value sent by the server will be returned.

This setting specifies what file format to export Google Docs as when downloading; it takes a file extension, which will be applied to the downloaded filename if necessary. Valid values (and their associated MIME types) are:

• docx (default) - application/vnd.openxmlformats-officedocument.wordprocessingml.document
• epub - application/epub+zip
• htm or html - text/html
• odt - application/vnd.oasis.opendocument.text
• pdf - application/pdf
• rtf - application/rtf
• txt - text/plain
• zip - application/zip

Note that this setting is only applicable to the CloudStorage Receiver, and is only valid when the ServiceProvider property is set to spGoogleDrive (3).

This may be set to the location of a file on disk that will hold the names of files that were previously downloaded from the server. On each PollingInterval the task will check to see if the file on the server exists in this list. If the file exists in this list, it is determined that the file was previously downloaded and is not downloaded on the current polling interval. The list is automatically updated on each polling interval.

If a file name is added to the DownloadCacheFile and is not seen on the server again within DownloadCacheFileDuration minutes, it will be removed from the cache. This can prevent the download cache file from growing too large in certain cases.

The default value is 0, meaning that files will never be removed.

This setting is only applicable if DownloadCacheFile is set.

This setting specifies what file format to export Google Drawings as when downloading; it takes a file extension, which will be applied to the downloaded filename if necessary. Valid values (and their associated MIME types) are:

• jpg or jpeg - image/jpeg
• pdf - application/pdf
• png (default) - image/png
• svg - image/svg+xml

Note that this setting is only applicable to the CloudStorage Receiver, and is only valid when the ServiceProvider property is set to spGoogleDrive (3).

This setting is used in conjunction with DownloadCacheFile, and is only available on the receive task. If DownloadCacheFile is enabled, this setting can be used to control how the receive task uses the download file cache information when deciding whether to download a file again. (Similar to the "Enable Timestamp Comparison" property on Microsoft's FTP BizTalk Adapter.)

If this is set to False, the receive task will not download a file again if the cache contains any information about it (that is, if it has been downloaded before).

If this is set to True, the receive task will check the metadata of the remote file against its cached metadata, and will download the file again if any of the metadata differs.

When set to true, the task will use the specified filename when saving the file in LocalDirectory instead of the name of the file on the server.

Note that if multiple files are downloaded from the server, the task will attempt to save all files using the value specified. For this reason, it is recommended that this setting be used only in cases where only one file is being downloaded from the server.

When the ServiceProvider property is set to one of the following providers, this setting can be used to specify which region the task should make requests against:

• spAmazonS3 (0)
• spWasabi (7)
• spDigitalOcean (8)
• spGoogleStorage (9)
• spIBMStorage (13)
• spLinode (14)

When ServiceProvider is set to spAmazonS3 (0), possible values are:

When ServiceProvider is set to spWasabi (7), possible values are:

When ServiceProvider is set to spDigitalOcean (8), possible values are:

When ServiceProvider is set to spGoogleStorage (9), possible values are:

(* denotes a multi-regional location)

When ServiceProvider is set to spIBMStorage (13), possible values are:

Note that private. or direct. may optionally be prepended to any of the values above; refer to IBM Cloud's Object Storage documentation for information on regions and endpoints.

When ServiceProvider is set to spLinode (14), possible values are:

The lists above are not necessarily exhaustive; refer to the appropriate service provider's documentation for a complete list of regions.

This setting specifies what file format to export Google Sheets as when downloading; it takes a file extension, which will be applied to the downloaded filename if necessary. Valid values (and their associated MIME types) are:

• csv - text/csv
• ods - application/vnd.oasis.opendocument.spreadsheet
• pdf - application/pdf
• tsv - text/tab-separated-values
• xlsx (default) - application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
• zip - application/zip

Note that this setting is only applicable to the CloudStorage Receiver, and is only valid when the ServiceProvider property is set to spGoogleDrive (3).

This setting specifies what file format to export Google Slides as when downloading; it takes a file extension, which will be applied to the downloaded filename if necessary. Valid values (and their associated MIME types) are:

• odp - application/vnd.oasis.opendocument.presentation
• pdf - application/pdf
• pptx (default) - application/vnd.openxmlformats-officedocument.presentationml.presentation
• txt - text/plain

Note that this setting is only applicable to the CloudStorage Receiver, and is only valid when the ServiceProvider property is set to spGoogleDrive (3).

When the ServiceProvider property is set to one of the following providers, this setting can be used to specify whether the task should make requests using virtual-hosted-style URLs or path-style URLs:

• spAmazonS3 (0) - True by default.
• spWasabi (7) - False by default.
• spDigitalOcean (8) - False by default.
• spGoogleStorage (9) - False by default.
• spIBMStorage (13) - True by default.
• spLinode (14) - True by default.

When True, the task will use virtual-hosted-style URLs like, e.g., https://yourbucket.[SERVICE_PROVIDER_DOMAIN]/yourobjectpath. When False, the task will use path-style URLs like, e.g., https://[SERVICE_PROVIDER_DOMAIN]/yourbucket/yourobject.

Important: Amazon has publicly announced that buckets created after September 30, 2020 will only support virtual-hosted-style URLs. Buckets created on or before September 30, 2020 will continue to support both URL styles.

If set to true, the task will reuse the context if and only if the following criteria are met:

• The target host name is the same.
• The system cache entry has not expired (default timeout is 10 hours).
• The application process that calls the function is the same.
• The logon session is the same.
• The instance of the task is the same.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the task will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when UseInternalSecurityAPI is False (default):

// The "Other" property could contain ONE of the following lines:
SSLEnabledCipherSuites=*
SSLEnabledCipherSuites=CALG_AES_256
SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES

• CALG_3DES
• CALG_3DES_112
• CALG_AES
• CALG_AES_128
• CALG_AES_192
• CALG_AES_256
• CALG_AGREEDKEY_ANY
• CALG_CYLINK_MEK
• CALG_DES
• CALG_DESX
• CALG_DH_EPHEM
• CALG_DH_SF
• CALG_DSS_SIGN
• CALG_ECDH
• CALG_ECDH_EPHEM
• CALG_ECDSA
• CALG_ECMQV
• CALG_HASH_REPLACE_OWF
• CALG_HUGHES_MD5
• CALG_HMAC
• CALG_KEA_KEYX
• CALG_MAC
• CALG_MD2
• CALG_MD4
• CALG_MD5
• CALG_NO_SIGN
• CALG_OID_INFO_CNG_ONLY
• CALG_OID_INFO_PARAMETERS
• CALG_PCT1_MASTER
• CALG_RC2
• CALG_RC4
• CALG_RC5
• CALG_RSA_KEYX
• CALG_RSA_SIGN
• CALG_SCHANNEL_ENC_KEY
• CALG_SCHANNEL_MAC_KEY
• CALG_SCHANNEL_MASTER_HASH
• CALG_SEAL
• CALG_SHA
• CALG_SHA1
• CALG_SHA_256
• CALG_SHA_384
• CALG_SHA_512
• CALG_SKIPJACK
• CALG_SSL2_MASTER
• CALG_SSL3_MASTER
• CALG_SSL3_SHAMD5
• CALG_TEK
• CALG_TLS1_MASTER
• CALG_TLS1PRF

// The "Other" property could contain ONE of the following lines:
SSLEnabledCipherSuites=*
SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA
SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_DH_ANON_WITH_AES_128_CBC_SHA

• TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
• TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
• TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
• TLS_DHE_DSS_WITH_AES_128_CBC_SHA
• TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
• TLS_DHE_DSS_WITH_AES_256_CBC_SHA
• TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
• TLS_DHE_DSS_WITH_DES_CBC_SHA
• TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
• TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
• TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
• TLS_DHE_RSA_WITH_AES_128_CBC_SHA
• TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
• TLS_DHE_RSA_WITH_AES_256_CBC_SHA
• TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
• TLS_DHE_RSA_WITH_DES_CBC_SHA
• TLS_RSA_WITH_AES_256_GCM_SHA384
• TLS_RSA_WITH_AES_128_GCM_SHA256
• TLS_RSA_WITH_3DES_EDE_CBC_SHA
• TLS_RSA_WITH_AES_128_CBC_SHA
• TLS_RSA_WITH_AES_128_CBC_SHA256
• TLS_RSA_WITH_AES_256_CBC_SHA
• TLS_RSA_WITH_AES_256_CBC_SHA256
• TLS_RSA_WITH_DES_CBC_SHA
• TLS_RSA_WITH_RC4_128_MD5
• TLS_RSA_WITH_RC4_128_SHA

If SSLEnabledProtocols is configured to use TLS 1.3 the following values are supported:

• TLS_AES_128_GCM_SHA256
• TLS_AES_256_GCM_SHA384

SSLEnabledCipherSuites is used together with SSLCipherStrength.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:

Note: TLS 1.1 and TLS1.2 support are only available starting with Windows 7.

Note: Enabling TLS 1.3 will automatically set UseInternalSecurityAPI to True.

This setting specifies whether the transport log contains the full certificate chain. By default this value is False and only the leaf certificate will be present.

If set to True all certificates returned by the server will be present in the transport log. This includes the leaf certificate, any intermediate certificate, and the root certificate.

Note: When UseInternalSecurityAPI is set to True this value is automatically set to True. This is needed for proper validation when using the internal provider.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:

This setting specifies the allowed server certificate signature algorithms when UseInternalSecurityAPI is True and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the task will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the task will fail with an error.

The format of this value is a comma separated list of hash-signature combinations. For instance:

// The "Other" could contain ALL of these lines:
UseInternalSecurityAPI=true
SSLEnabledProtocols=3072
TLS12SignatureAlgorithms=sha1-rsa,sha1-dsa,sha256-rsa,sha256-dsa

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and UseInternalSecurityAPI is set to True, the values refer to the supported groups for ECC. The following values are supported:

• "ecdhe_secp256r1" (default)
• "ecdhe_secp384r1" (default)
• "ecdhe_secp521r1" (default)

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

• "ecdhe_x25519" (default)
• "ecdhe_x448"
• "ecdhe_secp256r1" (default)
• "ecdhe_secp384r1" (default)
• "ecdhe_secp521r1"
• "ffdhe_2048" (default)
• "ffdhe_3072" (default)
• "ffdhe_4096"
• "ffdhe_6144"
• "ffdhe_8192"

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

• "rsa_pkcs1_sha256" (default)
• "rsa_pkcs1_sha384" (default)
• "rsa_pkcs1_sha512" (default)

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

• "ecdhe_x25519" (default)
• "ecdhe_x448" (default)
• "ecdhe_secp256r1" (default)
• "ecdhe_secp384r1" (default)
• "ecdhe_secp521r1" (default)
• "ffdhe_2048" (default)
• "ffdhe_3072" (default)
• "ffdhe_4096" (default)
• "ffdhe_6144" (default)
• "ffdhe_8192" (default)