AzureSecrets Class

Properties   Methods   Events   Config Settings   Errors  

The AzureSecrets class makes it easy to interact with secrets in Azure Key Vaults.

Syntax

class cloudkeys.AzureSecrets

Remarks

The AzureSecrets class provides an easy-to-use interface for the secret-related functionality of the Azure Key Vault service. Azure Key Vault allows you to work with a few different kinds of resources, one of which is secrets (e.g., passwords, symmetric keys, etc.). This class helps you to create and manage said secrets. To work with asymmetric key pairs instead, refer to the AzureKeys class.

To begin, register for an Azure account and create one or more Key Vaults via the Azure Portal. Set the vault property to the name of the vault you wish to work with.

This class requires authentication via OAuth 2.0. First, perform OAuth authentication using the OAuth* properties to set the appropriate fields for the chosen o_auth_client_profile and o_auth_grant_type.

The component has the following defaults:

Additionally, depending on how the application is registered (Ex. Single-tenant, Multi-tenant) and what o_auth_grant_type is selected (Ex. Authorization Code, Password), it may be required to use the tenant ID rather than "common" in the o_auth_server_auth_url, and o_auth_server_token_url properties. See below for examples of the modified URLs:

Application Profile

This profile encompasses the most basic grant types that OAuth supports. When this profile is set, all the requests and response handling is done by the class. Depending on the grant type, this may involve launching a browser so a user can login to authenticate with a authorization server. It may also involve starting an embedded web server to receive a response from a redirect.

To start the authentication and authorization process, the authorize method should be called. If the authorization and authentication was successful, then the o_auth_access_token property will be populated. Additionally, if a refresh token was provided the o_auth_refresh_token property will be populated as well. These values of the fields are for informational purposes. The class will also cache these tokens along with when the o_auth_access_token will be expired. When a method that makes requests to the service provider is called or the authorize method is called the class will automatically check to see if the access token is expired. If it is, it will then automatically try to get a new o_auth_access_token. If the authorize method was not used and user interaction would be required, the class will throw an error which can be caught. When user interaction is needed depends on what grant type is set in the o_auth_grant_type property. To force the component to only check the access token when the authorize method is called, the OAuthAutomaticRefresh configuration setting can be set to false.

A brief description of the supported values for the o_auth_grant_type property are below. For more information, see the service documentation.

Authorization Code

When using the Authorization Code grant type, the class will use an authorization code to get an access token. For this o_auth_grant_type the class expects a o_auth_client_id, o_auth_client_secret, o_auth_server_auth_url, and o_auth_server_token_url to be set. When the authorize method is called, the component will start the embedded web server and launch the browser so the user can authorize the application. Once the user authorizes, the service provider will redirect them to the embedded web server and the class will parse the authorization code, setting the o_auth_authorization_code property, from the redirect. Immediately, the class will make a request to the token server to exchange the authorization code for an access token. The token server will return an access token and possibly a refresh token. If the o_auth_refresh_token property is set, or a refresh token is cached, then the class will not launch the browser and use the refresh token in its request to the token server instead of an authorization code.

Example: AzureSecrets azuresecrets = new AzureSecrets(); azuresecrets.OAuth.ClientProfile = OAuthClientProfiles.cocpApplication; azuresecrets.OAuth.GrantType = OAuthGrantTypes.cogtAuthorizationCode; azuresecrets.OAuth.ClientId = CLIENT_ID; azuresecrets.OAuth.ClientSecret = SECRET_ID; azuresecrets.OAuth.AuthorizationScope = "offline_access https://vault.azure.net/user_impersonation"; azuresecrets.OAuth.ServerAuthURL = "https://login.microsoftonline.com/" + TENANT_ID + "/oauth2/v2.0/authorize"; azuresecrets.OAuth.ServerTokenURL = "https://login.microsoftonline.com/" + TENANT_ID + "/oauth2/v2.0/token"; azuresecrets.Authorize(); Implicit

Note: This grant type is considered insecure and should only be used when necessary.

When using the Implicit grant type, the class will request the authorization server to get an access token. For this o_auth_grant_type the class expects a o_auth_client_id, o_auth_client_secret, and o_auth_server_auth_url to be set. When the authorize method is called, the component will start the embedded web server and launch the browser so the user can authorize the application. Once the user authorizes, the service provider will redirect them to the embedded web server and the class will parse the access token from the redirect.

A disadvantage of the grant type is that can not use a refresh token to silently get a new access token. Most service providers offer a way to silently get a new access token. See the service documentation for specifics. This means the class will not be able to automatically get a fresh token once it expires.

Password

Note: This grant type is considered insecure and should only be used when necessary.

When using the Resource Owner Password Credentials grant type, the class will authenticate as the resource owner. This allows for the class to avoid user interaction. This grant type often has specific limitations put on it by the service provider. See the service documentation for more details.

For this o_auth_grant_type the class requires OAuthPasswordGrantUsername, o_auth_client_secret, and o_auth_server_token_url to be set. The o_auth_client_secret should be set to the password of the account instead of a typical secret. In some cases, the o_auth_client_id also needs to be set. When the authorize method is called, the component will make a request to the token server for an access token using the username and password. The token server will return an access token if the authentication was successful. When this access token is expired, the component will automatically (see above for detailed description) make a new request to get a fresh one.

Web Profile

External OAuth Support

Bearer ACCESS_TOKEN_VALUE

Assign this value to the authorization property before attempting any operations. Setting the authorization property will cause the class to ignore the values set in the o_auth property.

For Example: Oauth oauth = new Oauth(); oauth.ClientId = "CLIENT_ID"; oauth.ClientSecret = "CLIENT_SECRET"; oauth.ServerAuthURL = "https://login.microsoftonline.com/common/oauth2/v2.0/authorize"; oauth.ServerTokenURL = "https://login.microsoftonline.com/common/oauth2/v2.0/token"; oauth.AuthorizationScope = "offline_access https://vault.azure.net/user_impersonation"; oauth.GrantType = OauthGrantTypes.ogtAuthorizationCode; azuresecrets.Authorization = oauth.GetAuthorization(); Consult the documentation for the service for more information about supported scope values and more details on OAuth authentication.

Using the Class

Secrets can be created using the create_secret method. A secret's name must be set at the time of creation, and cannot be changed later. The secret's value and, optionally, content type must also be set, but can be changed at any time. To change a secret's value, create a new version of it using the create_secret method (which will always create a new version if a secret with the specified name already exists); to change a secret's content-type, use the update_secret method.

To retrieve a secret and its information, use the get_secret method.

When a secret will no long be used, it can be deleted using the delete_secret method. However, the secret will only be soft-deleted; by default, Azure will permanently delete it after the waiting period configured for the vault. During this waiting period, the soft-deleted secret may be recovered using recover_secret, or permanently deleted using purge_secret (assuming the currently-authenticated user has the permissions to do so). // Create a secret. azuresecrets.SecretData = "Test123"; azuresecrets.CreateSecret("mysecret", "text/plain"); // Download the secret value to a local file. azuresecrets.LocalFile = "C:\temp\secret.txt"; azuresecrets.GetSecret("mysecret"); // Create a new version of the secret. azuresecrets.SecretData = "Cats456"; azuresecrets.CreateSecret("mysecret", "text/plain"); // ... Some time later, when the secret is no longer needed ... azuresecrets.DeleteSecret("mysecret"); // At this point, the secret is only soft-deleted. It could be recovered... azuresecrets.RecoverSecret("mysecret"); // ...or permanently deleted. azuresecrets.PurgeSecret("mysecret");

To list secrets, use the list_secrets method. This method is also used to list soft-deleted secrets if the GetDeleted configuration setting has been enabled first. To list a secret's versions, use the list_versions method. (You cannot list a deleted secret's versions.) // If there are many secrets to list, there may be multiple pages of results. This will // cause all pages of results to be accumulated into the Secrets collection property. do { azuresecrets.ListSecrets(); } while (!string.IsNullOrEmpty(azuresecrets.SecretMarker)); // A similar thing applies to secret versions as well. do { azuresecrets.ListVersions("mysecret"); } while (!string.IsNullOrEmpty(azuresecrets.VersionMarker));

The class also supports a variety of other functionality, including:

• Enabling and disabling secrets with set_secret_enabled.
• Tagging support using add_tag and the Tag* properties.
• Secure secret backup and restoration using backup_secret and restore_secret.
• And more!

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.

authorization Property

OAuth 2.0 Authorization Token.

Syntax

def get_authorization() -> str: ...
def set_authorization(value: str) -> None: ...

authorization = property(get_authorization, set_authorization)

Default Value

""

Remarks

This class supports authentication via OAuth 2.0. First, perform OAuth authentication using the OAuth class or a separate process. Once complete you should have an authorization string which looks like:

Bearer ACCESS_TOKEN

encode_data Property

Whether to automatically base64-encode and -decode secret data.

Syntax

def get_encode_data() -> bool: ...
def set_encode_data(value: bool) -> None: ...

encode_data = property(get_encode_data, set_encode_data)

Default Value

FALSE

Remarks

This property specifies whether the class should automatically base64-encode secret data when it is uploaded by create_secret, and base64-decode it when it is downloaded with get_secret.

Secrets are stored on the server as strings, and are transported via a JSON string property, so binary values must be encoded in some way; this property is provided as a convenience.

firewall_auto_detect Property

This property tells the class whether or not to automatically detect and use firewall system settings, if available.

Syntax

def get_firewall_auto_detect() -> bool: ...
def set_firewall_auto_detect(value: bool) -> None: ...

firewall_auto_detect = property(get_firewall_auto_detect, set_firewall_auto_detect)

Default Value

FALSE

Remarks

This property tells the class whether or not to automatically detect and use firewall system settings, if available.

firewall_type Property

This property determines the type of firewall to connect through.

Syntax

def get_firewall_type() -> int: ...
def set_firewall_type(value: int) -> None: ...

firewall_type = property(get_firewall_type, set_firewall_type)

Default Value

0

Remarks

This property determines the type of firewall to connect through. The applicable values are as follows:

firewall_host Property

This property contains the name or IP address of firewall (optional).

Syntax

def get_firewall_host() -> str: ...
def set_firewall_host(value: str) -> None: ...

firewall_host = property(get_firewall_host, set_firewall_host)

Default Value

""

Remarks

This property contains the name or IP address of firewall (optional). If a firewall_host is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the class fails with an error.

firewall_password Property

This property contains a password if authentication is to be used when connecting through the firewall.

Syntax

def get_firewall_password() -> str: ...
def set_firewall_password(value: str) -> None: ...

firewall_password = property(get_firewall_password, set_firewall_password)

Default Value

""

Remarks

This property contains a password if authentication is to be used when connecting through the firewall. If firewall_host is specified, the firewall_user and firewall_password properties are used to connect and authenticate to the given firewall. If the authentication fails, the class fails with an error.

firewall_port Property

This property contains the transmission control protocol (TCP) port for the firewall Host .

Syntax

def get_firewall_port() -> int: ...
def set_firewall_port(value: int) -> None: ...

firewall_port = property(get_firewall_port, set_firewall_port)

Default Value

0

Remarks

This property contains the transmission control protocol (TCP) port for the firewall firewall_host. See the description of the firewall_host property for details.

Note: This property is set automatically when firewall_type is set to a valid value. See the description of the firewall_type property for details.

firewall_user Property

This property contains a user name if authentication is to be used connecting through a firewall.

Syntax

def get_firewall_user() -> str: ...
def set_firewall_user(value: str) -> None: ...

firewall_user = property(get_firewall_user, set_firewall_user)

Default Value

""

Remarks

This property contains a user name if authentication is to be used connecting through a firewall. If the firewall_host is specified, this property and firewall_password properties are used to connect and authenticate to the given firewall. If the authentication fails, the class fails with an error.

idle Property

The current status of the class.

Syntax

def get_idle() -> bool: ...

idle = property(get_idle, None)

Default Value

TRUE

Remarks

idle will be False if the component is currently busy (communicating and/or waiting for an answer), and True at all other times.

This property is read-only.

local_file Property

The local file to write data to, or whose data should be sent.

Syntax

def get_local_file() -> str: ...
def set_local_file(value: str) -> None: ...

local_file = property(get_local_file, set_local_file)

Default Value

""

Remarks

This property specifies the location of a local file on disk. This is used as the source file when calling create_secret, and as the destination file when calling get_secret.

local_host Property

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

def get_local_host() -> str: ...
def set_local_host(value: str) -> None: ...

local_host = property(get_local_host, set_local_host)

Default Value

""

Remarks

The local_host property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the local_host property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

NOTE: local_host is not persistent. You must always set it in code, and never in the property window.

o_auth_access_token Property

The access token returned by the authorization server.

Syntax

def get_o_auth_access_token() -> str: ...
def set_o_auth_access_token(value: str) -> None: ...

o_auth_access_token = property(get_o_auth_access_token, set_o_auth_access_token)

Default Value

""

Remarks

The access token returned by the authorization server. This is set when the class makes a request to the token server.

o_auth_authorization_code Property

The authorization code that is exchanged for an access token.

Syntax

def get_o_auth_authorization_code() -> str: ...
def set_o_auth_authorization_code(value: str) -> None: ...

o_auth_authorization_code = property(get_o_auth_authorization_code, set_o_auth_authorization_code)

Default Value

""

Remarks

The authorization code that is exchanged for an access token. This is required to be set when the o_auth_client_profile property is set to the Web profile. Otherwise, this field is for information purposes only.

o_auth_authorization_scope Property

The scope request or response parameter used during authorization.

Syntax

def get_o_auth_authorization_scope() -> str: ...
def set_o_auth_authorization_scope(value: str) -> None: ...

o_auth_authorization_scope = property(get_o_auth_authorization_scope, set_o_auth_authorization_scope)

Default Value

""

Remarks

The scope request or response parameter used during authorization.

o_auth_client_id Property

The id of the client assigned when registering the application.

Syntax

def get_o_auth_client_id() -> str: ...
def set_o_auth_client_id(value: str) -> None: ...

o_auth_client_id = property(get_o_auth_client_id, set_o_auth_client_id)

Default Value

""

Remarks

The id of the client assigned when registering the application.

o_auth_client_profile Property

The type of client that is requesting authorization.

Syntax

def get_o_auth_client_profile() -> int: ...
def set_o_auth_client_profile(value: int) -> None: ...

o_auth_client_profile = property(get_o_auth_client_profile, set_o_auth_client_profile)

Default Value

0

Remarks

The type of client that is requesting authorization. See the introduction section for more information. Possible values are:

o_auth_client_secret Property

The secret value for the client assigned when registering the application.

Syntax

def get_o_auth_client_secret() -> str: ...
def set_o_auth_client_secret(value: str) -> None: ...

o_auth_client_secret = property(get_o_auth_client_secret, set_o_auth_client_secret)

Default Value

""

Remarks

The secret value for the client assigned when registering the application.

o_auth_grant_type Property

The OAuth grant type used to acquire an OAuth access token.

Syntax

def get_o_auth_grant_type() -> int: ...
def set_o_auth_grant_type(value: int) -> None: ...

o_auth_grant_type = property(get_o_auth_grant_type, set_o_auth_grant_type)

Default Value

0

Remarks

The OAuth grant type used to acquire an OAuth access token. See the introduction section for more information. Possible values are:

o_auth_refresh_token Property

Specifies the refresh token received from or sent to the authorization server.

Syntax

def get_o_auth_refresh_token() -> str: ...
def set_o_auth_refresh_token(value: str) -> None: ...

o_auth_refresh_token = property(get_o_auth_refresh_token, set_o_auth_refresh_token)

Default Value

""

Remarks

Specifies the refresh token received from or sent to the authorization server. This property is set automatically if a refresh token is retrieved from the token server. If the OAuthAutomaticRefresh configuration setting is set to true, and the o_auth_grant_type property is set to a grant that can use refresh tokens.

o_auth_return_url Property

The URL where the user (browser) returns after authenticating.

Syntax

def get_o_auth_return_url() -> str: ...
def set_o_auth_return_url(value: str) -> None: ...

o_auth_return_url = property(get_o_auth_return_url, set_o_auth_return_url)

Default Value

""

Remarks

The URL where the user (browser) returns after authenticating. This property is mapped to the redirect_uri parameter when making a request to the authorization server. Typically, this is automatically set by the class when using the embedded web server. If the OAuthWebServerPort or OAuthWebServerHost configuration settings is set, then this property should be set to match. If using the Web client profile, this should be set to the place where the authorization code will be parsed out of the response after the user finishes authorizing.

o_auth_server_auth_url Property

The URL of the authorization server.

Syntax

def get_o_auth_server_auth_url() -> str: ...
def set_o_auth_server_auth_url(value: str) -> None: ...

o_auth_server_auth_url = property(get_o_auth_server_auth_url, set_o_auth_server_auth_url)

Default Value

""

Remarks

The URL of the authorization server.

o_auth_server_token_url Property

The URL of the token server used to obtain the access token.

Syntax

def get_o_auth_server_token_url() -> str: ...
def set_o_auth_server_token_url(value: str) -> None: ...

o_auth_server_token_url = property(get_o_auth_server_token_url, set_o_auth_server_token_url)

Default Value

""

Remarks

The URL of the token server used to obtain the access token.

o_auth_web_auth_url Property

The URL to which the user should be re-directed for authorization.

Syntax

def get_o_auth_web_auth_url() -> str: ...

o_auth_web_auth_url = property(get_o_auth_web_auth_url, None)

Default Value

""

Remarks

The URL to which the user should be re-directed for authorization. This field is used to get the URL that the user should be redirected to when using the Web client profile. See introduction section for more information.

This property is read-only.

other_headers Property

This property includes other headers as determined by the user (optional).

Syntax

def get_other_headers() -> str: ...
def set_other_headers(value: str) -> None: ...

other_headers = property(get_other_headers, set_other_headers)

Default Value

""

Remarks

This property can be set to a string of headers to be appended to the HTTP request headers created from other properties like content_type and from_.

The headers must follow the format Header: Value as described in the HTTP specifications. Header lines should be separated by CRLF ("\r\n") .

Use this property with caution. If this property contains invalid headers, HTTP requests may fail.

This property is useful for extending the functionality of the class beyond what is provided.

overwrite Property

Whether the local file should be overwritten if necessary.

Syntax

def get_overwrite() -> bool: ...
def set_overwrite(value: bool) -> None: ...

overwrite = property(get_overwrite, set_overwrite)

Default Value

FALSE

Remarks

This property controls whether the specified local_file should be overwritten if it already exists.

parsed_header_count Property

The number of records in the ParsedHeader arrays.

Syntax

def get_parsed_header_count() -> int: ...

parsed_header_count = property(get_parsed_header_count, None)

Default Value

0

Remarks

This property controls the size of the following arrays:

• parsed_header_field
• parsed_header_value

The array indices start at 0 and end at parsed_header_count - 1.

This property is read-only.

parsed_header_field Property

This property contains the name of the HTTP header (this is the same case as it is delivered).

Syntax

def get_parsed_header_field(parsed_header_index: int) -> str: ...

Default Value

""

Remarks

This property contains the name of the HTTP Header (this is the same case as it is delivered).

The parsed_header_index parameter specifies the index of the item in the array. The size of the array is controlled by the parsed_header_count property.

This property is read-only.

parsed_header_value Property

This property contains the header contents.

Syntax

def get_parsed_header_value(parsed_header_index: int) -> str: ...

Default Value

""

Remarks

This property contains the Header contents.

The parsed_header_index parameter specifies the index of the item in the array. The size of the array is controlled by the parsed_header_count property.

This property is read-only.

proxy_auth_scheme Property

This property is used to tell the class which type of authorization to perform when connecting to the proxy.

Syntax

def get_proxy_auth_scheme() -> int: ...
def set_proxy_auth_scheme(value: int) -> None: ...

proxy_auth_scheme = property(get_proxy_auth_scheme, set_proxy_auth_scheme)

Default Value

0

Remarks

This property is used to tell the class which type of authorization to perform when connecting to the proxy. This is used only when the proxy_user and proxy_password properties are set.

proxy_auth_scheme should be set to authNone (3) when no authentication is expected.

By default, proxy_auth_scheme is authBasic (0), and if the proxy_user and proxy_password properties are set, the component will attempt basic authentication.

If proxy_auth_scheme is set to authDigest (1), digest authentication will be attempted instead.

If proxy_auth_scheme is set to authProprietary (2), then the authorization token will not be generated by the class. Look at the configuration file for the class being used to find more information about manually setting this token.

If proxy_auth_scheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of proxy_user and proxy_password.

proxy_auto_detect Property

This property tells the class whether or not to automatically detect and use proxy system settings, if available.

Syntax

def get_proxy_auto_detect() -> bool: ...
def set_proxy_auto_detect(value: bool) -> None: ...

proxy_auto_detect = property(get_proxy_auto_detect, set_proxy_auto_detect)

Default Value

FALSE

Remarks

This property tells the class whether or not to automatically detect and use proxy system settings, if available. The default value is False.

proxy_password Property

This property contains a password if authentication is to be used for the proxy.

Syntax

def get_proxy_password() -> str: ...
def set_proxy_password(value: str) -> None: ...

proxy_password = property(get_proxy_password, set_proxy_password)

Default Value

""

Remarks

This property contains a password if authentication is to be used for the proxy.

If proxy_auth_scheme is set to Basic Authentication, the proxy_user and proxy_password are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If proxy_auth_scheme is set to Digest Authentication, the proxy_user and proxy_password properties are used to respond to the Digest Authentication challenge from the server.

If proxy_auth_scheme is set to NTLM Authentication, the proxy_user and proxy_password properties are used to authenticate through NTLM negotiation.

proxy_port Property

This property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).

Syntax

def get_proxy_port() -> int: ...
def set_proxy_port(value: int) -> None: ...

proxy_port = property(get_proxy_port, set_proxy_port)

Default Value

80

Remarks

This property contains the Transmission Control Protocol (TCP) port for the proxy proxy_server (default 80). See the description of the proxy_server property for details.

proxy_server Property

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

Syntax

def get_proxy_server() -> str: ...
def set_proxy_server(value: str) -> None: ...

proxy_server = property(get_proxy_server, set_proxy_server)

Default Value

""

Remarks

If a proxy proxy_server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the proxy_server property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the proxy_server property is set to the corresponding address. If the search is not successful, an error is returned.

proxy_ssl Property

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.

Syntax

def get_proxy_ssl() -> int: ...
def set_proxy_ssl(value: int) -> None: ...

proxy_ssl = property(get_proxy_ssl, set_proxy_ssl)

Default Value

0

Remarks

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

proxy_user Property

This property contains a user name, if authentication is to be used for the proxy.

Syntax

def get_proxy_user() -> str: ...
def set_proxy_user(value: str) -> None: ...

proxy_user = property(get_proxy_user, set_proxy_user)

Default Value

""

Remarks

This property contains a username if authentication is to be used for the proxy.

If proxy_auth_scheme is set to Basic Authentication, the proxy_user and proxy_password properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If proxy_auth_scheme is set to Digest Authentication, the proxy_user and proxy_password properties are used to respond to the Digest Authentication challenge from the server.

If proxy_auth_scheme is set to NTLM Authentication, the proxy_user and proxy_password properties are used to authenticate through NTLM negotiation.

query_param_count Property

The number of records in the QueryParam arrays.

Syntax

def get_query_param_count() -> int: ...
def set_query_param_count(value: int) -> None: ...

query_param_count = property(get_query_param_count, set_query_param_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

• query_param_name
• query_param_value

The array indices start at 0 and end at query_param_count - 1.

query_param_name Property

The name of the query parameter.

Syntax

def get_query_param_name(query_param_index: int) -> str: ...
def set_query_param_name(query_param_index: int, value: str) -> None: ...

Default Value

""

Remarks

The name of the query parameter.

This property specifies the name of the query parameter.

The query_param_index parameter specifies the index of the item in the array. The size of the array is controlled by the query_param_count property.

query_param_value Property

The value of the query parameter.

Syntax

def get_query_param_value(query_param_index: int) -> str: ...
def set_query_param_value(query_param_index: int, value: str) -> None: ...

Default Value

""

Remarks

The value of the query parameter.

This property specifies the value of the query parameter. The class will automatically URL-encode this value when sending the request.

The query_param_index parameter specifies the index of the item in the array. The size of the array is controlled by the query_param_count property.

secret_data Property

The secret data that was retrieved, or that should be sent.

Syntax

def get_secret_data() -> bytes: ...
def set_secret_data(value: bytes) -> None: ...

secret_data = property(get_secret_data, set_secret_data)

Default Value

""

Remarks

This property is populated with secret data after calling get_secret if local_file is not set.

This property can also be set before calling create_secret; its data will be sent if local_file is not set.

secret_marker Property

A marker indicating what page of secrets to return next.

Syntax

def get_secret_marker() -> str: ...
def set_secret_marker(value: str) -> None: ...

secret_marker = property(get_secret_marker, set_secret_marker)

Default Value

""

Remarks

This property will be populated when list_secrets is called if the results are paged and there are more pages. To list all secrets, continue to call list_secrets until this property returns empty string.

Refer to list_secrets for more information.

secret_count Property

The number of records in the Secret arrays.

Syntax

def get_secret_count() -> int: ...

secret_count = property(get_secret_count, None)

Default Value

0

Remarks

This property controls the size of the following arrays:

• secret_content_type
• secret_creation_date
• secret_deletion_date
• secret_enabled
• secret_expiry_date
• secret_name
• secret_not_before_date
• secret_purge_date
• secret_recoverable_days
• secret_recovery_level
• secret_update_date
• secret_version_id

The array indices start at 0 and end at secret_count - 1.

This property is read-only.

secret_content_type Property

The content type of the secret.

Syntax

def get_secret_content_type(secret_index: int) -> str: ...

Default Value

""

Remarks

The content type of the secret.

This property reflects the content type of the secret.

The secret_index parameter specifies the index of the item in the array. The size of the array is controlled by the secret_count property.

This property is read-only.

secret_creation_date Property

The creation date of the secret.

Syntax

def get_secret_creation_date(secret_index: int) -> int: ...

Default Value

-1

Remarks

The creation date of the secret.

This property reflects the creation date of the secret, in seconds since the Unix epoch.

The secret_index parameter specifies the index of the item in the array. The size of the array is controlled by the secret_count property.

This property is read-only.

secret_deletion_date Property

The deletion date of the secret.

Syntax

def get_secret_deletion_date(secret_index: int) -> int: ...

Default Value

-1

Remarks

The deletion date of the secret.

This property reflects the deletion date of the secret, in seconds since the Unix epoch, or -1 if the secret has not been deleted.

The secret_index parameter specifies the index of the item in the array. The size of the array is controlled by the secret_count property.

This property is read-only.

secret_enabled Property

Whether the secret is enabled.

Syntax

def get_secret_enabled(secret_index: int) -> bool: ...

Default Value

FALSE

Remarks

Whether the secret is enabled.

This property reflects whether the secret is currently enabled.

The secret_index parameter specifies the index of the item in the array. The size of the array is controlled by the secret_count property.

This property is read-only.

secret_expiry_date Property

The expiration date of the secret.

Syntax

def get_secret_expiry_date(secret_index: int) -> int: ...

Default Value

-1

Remarks

The expiration date of the secret.

This property reflects the expiration date of the secret, in seconds since the Unix epoch, or -1 if the secret does not expire.

Note that this property is purely informational; Azure does not enforce any additional restrictions based on whether the secret has expired.

The secret_index parameter specifies the index of the item in the array. The size of the array is controlled by the secret_count property.

This property is read-only.

secret_name Property

The name of the secret.

Syntax

def get_secret_name(secret_index: int) -> str: ...

Default Value

""

Remarks

The name of the secret.

This property reflects the name of the secret.

The secret_index parameter specifies the index of the item in the array. The size of the array is controlled by the secret_count property.

This property is read-only.

secret_not_before_date Property

The 'not before' date of the secret.

Syntax

def get_secret_not_before_date(secret_index: int) -> int: ...

Default Value

-1

Remarks

The 'not before' date of the secret.

This property reflects the "not before" date of the secret, in seconds since the Unix epoch, or -1 if the secret doesn't have an explicit "not before" date.

Note that this property is purely informational; Azure does not enforce any additional restrictions based on whether the secret is awaiting its "not before" date.

The secret_index parameter specifies the index of the item in the array. The size of the array is controlled by the secret_count property.

This property is read-only.

secret_purge_date Property

The purge date of the secret.

Syntax

def get_secret_purge_date(secret_index: int) -> int: ...

Default Value

-1

Remarks

The purge date of the secret.

This property reflects the purge (i.e., permanent deletion) date of the secret, in seconds since the Unix epoch, or -1 if the secret has not been deleted.

The secret_index parameter specifies the index of the item in the array. The size of the array is controlled by the secret_count property.

This property is read-only.

secret_recoverable_days Property

The number of days the secret will be recoverable if it gets deleted.

Syntax

def get_secret_recoverable_days(secret_index: int) -> int: ...

Default Value

0

Remarks

The number of days the secret will be recoverable if it gets deleted.

This property reflects the number of days that the secret will be recoverable for if it gets deleted.

Note that this property's value is based on the retention policy of the currently-selected vault; it will not change after the secret has actually been deleted.

The secret_index parameter specifies the index of the item in the array. The size of the array is controlled by the secret_count property.

This property is read-only.

secret_recovery_level Property

The secret's ability to be recovered and/or purged if it gets deleted.

Syntax

def get_secret_recovery_level(secret_index: int) -> str: ...

Default Value

""

Remarks

The secret's ability to be recovered and/or purged if it gets deleted.

This property reflects the secret's ability to be recovered and/or purged (i.e., permanently deleted) if it gets deleted. Possible values are as follows; please refer to this part of the Azure Key Vault documentation for more information about each one:

• CustomizedRecoverable
• CustomizedRecoverable+ProtectedSubscription
• CustomizedRecoverable+Purgeable
• Purgeable
• Recoverable
• Recoverable+ProtectedSubscription
• Recoverable+Purgeable

The secret_index parameter specifies the index of the item in the array. The size of the array is controlled by the secret_count property.

This property is read-only.

secret_update_date Property

The update date of the secret.

Syntax

def get_secret_update_date(secret_index: int) -> int: ...

Default Value

-1

Remarks

The update date of the secret.

This property reflects the update date of the secret, in seconds since the Unix epoch.

The secret_index parameter specifies the index of the item in the array. The size of the array is controlled by the secret_count property.

This property is read-only.

secret_version_id Property

The version Id of the secret.

Syntax

def get_secret_version_id(secret_index: int) -> str: ...

Default Value

""

Remarks

The version Id of the secret.

This property reflects the version Id of the secret.

The secret_index parameter specifies the index of the item in the array. The size of the array is controlled by the secret_count property.

This property is read-only.

ssl_accept_server_cert_encoded Property

This is the certificate (PEM/base64 encoded).

Syntax

def get_ssl_accept_server_cert_encoded() -> bytes: ...
def set_ssl_accept_server_cert_encoded(value: bytes) -> None: ...

ssl_accept_server_cert_encoded = property(get_ssl_accept_server_cert_encoded, set_ssl_accept_server_cert_encoded)

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The ssl_accept_server_cert_store and ssl_accept_server_cert_subject properties also may be used to specify a certificate.

When ssl_accept_server_cert_encoded is set, a search is initiated in the current ssl_accept_server_cert_store for the private key of the certificate. If the key is found, ssl_accept_server_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, ssl_accept_server_cert_subject is set to an empty string.

ssl_cert_encoded Property

This is the certificate (PEM/base64 encoded).

Syntax

def get_ssl_cert_encoded() -> bytes: ...
def set_ssl_cert_encoded(value: bytes) -> None: ...

ssl_cert_encoded = property(get_ssl_cert_encoded, set_ssl_cert_encoded)

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The ssl_cert_store and ssl_cert_subject properties also may be used to specify a certificate.

When ssl_cert_encoded is set, a search is initiated in the current ssl_cert_store for the private key of the certificate. If the key is found, ssl_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, ssl_cert_subject is set to an empty string.

ssl_cert_store Property

This is the name of the certificate store for the client certificate.

Syntax

def get_ssl_cert_store() -> bytes: ...
def set_ssl_cert_store(value: bytes) -> None: ...

ssl_cert_store = property(get_ssl_cert_store, set_ssl_cert_store)

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The ssl_cert_store_type property denotes the type of the certificate store specified by ssl_cert_store. If the store is password protected, specify the password in ssl_cert_store_password.

ssl_cert_store is used in conjunction with the ssl_cert_subject property to specify client certificates. If ssl_cert_store has a value, and ssl_cert_subject or ssl_cert_encoded is set, a search for a certificate is initiated. Please see the ssl_cert_subject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

ssl_cert_store_password Property

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

def get_ssl_cert_store_password() -> str: ...
def set_ssl_cert_store_password(value: str) -> None: ...

ssl_cert_store_password = property(get_ssl_cert_store_password, set_ssl_cert_store_password)

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

ssl_cert_store_type Property

This is the type of certificate store for this certificate.

Syntax

def get_ssl_cert_store_type() -> int: ...
def set_ssl_cert_store_type(value: int) -> None: ...

ssl_cert_store_type = property(get_ssl_cert_store_type, set_ssl_cert_store_type)

Default Value

0

Remarks

This is the type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:

ssl_cert_subject Property

This is the subject of the certificate used for client authentication.

Syntax

def get_ssl_cert_subject() -> str: ...
def set_ssl_cert_subject(value: str) -> None: ...

ssl_cert_subject = property(get_ssl_cert_subject, set_ssl_cert_subject)

Default Value

""

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

ssl_provider Property

This specifies the SSL/TLS implementation to use.

Syntax

def get_ssl_provider() -> int: ...
def set_ssl_provider(value: int) -> None: ...

ssl_provider = property(get_ssl_provider, set_ssl_provider)

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected, on Windows the class will use the platform implementation. On Linux/macOS the class will use the internal implementation. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used on all platforms.

ssl_server_cert_encoded Property

This is the certificate (PEM/base64 encoded).

Syntax

def get_ssl_server_cert_encoded() -> bytes: ...

ssl_server_cert_encoded = property(get_ssl_server_cert_encoded, None)

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The ssl_server_cert_store and ssl_server_cert_subject properties also may be used to specify a certificate.

When ssl_server_cert_encoded is set, a search is initiated in the current ssl_server_cert_store for the private key of the certificate. If the key is found, ssl_server_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, ssl_server_cert_subject is set to an empty string.

This property is read-only.

tag_count Property

The number of records in the Tag arrays.

Syntax

def get_tag_count() -> int: ...
def set_tag_count(value: int) -> None: ...

tag_count = property(get_tag_count, set_tag_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

• tag_name
• tag_value

The array indices start at 0 and end at tag_count - 1.

tag_name Property

The name of the tag.

Syntax

def get_tag_name(tag_index: int) -> str: ...
def set_tag_name(tag_index: int, value: str) -> None: ...

Default Value

""

Remarks

The name of the tag.

This property specifies the name of the tag.

The tag_index parameter specifies the index of the item in the array. The size of the array is controlled by the tag_count property.

tag_value Property

The value of the tag.

Syntax

def get_tag_value(tag_index: int) -> str: ...
def set_tag_value(tag_index: int, value: str) -> None: ...

Default Value

""

Remarks

The value of the tag.

This property specifies the value of the tag.

The tag_index parameter specifies the index of the item in the array. The size of the array is controlled by the tag_count property.

timeout Property

A timeout for the class.

Syntax

def get_timeout() -> int: ...
def set_timeout(value: int) -> None: ...

timeout = property(get_timeout, set_timeout)

Default Value

60

Remarks

If the timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If timeout is set to a positive value, the class will wait for the operation to complete before returning control.

The class will use do_events to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If timeout expires, and the operation is not yet complete, the class fails with an error.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by timeout seconds when any amount of data is successfully sent or received.

The default value for the timeout property is 60 seconds.

vault Property

Selects a vault for the class to interact with.

Syntax

def get_vault() -> str: ...
def set_vault(value: str) -> None: ...

vault = property(get_vault, set_vault)

Default Value

""

Remarks

This property specifies the Azure Key Vault vault, by name, that the class should interact with.

version_marker Property

A marker indicating what page of secret versions to return next.

Syntax

def get_version_marker() -> str: ...
def set_version_marker(value: str) -> None: ...

version_marker = property(get_version_marker, set_version_marker)

Default Value

""

Remarks

This property will be populated when list_versions is called if the results are paged and there are more pages. To list all secret versions, continue to call list_versions until this property returns empty string.

Refer to list_versions for more information.

add_query_param Method

Adds a query parameter to the QueryParams properties.

Syntax

def add_query_param(name: str, value: str) -> None: ...

Remarks

This method is used to add a query parameter to the QueryaParam* properties. Name specifies the name of the parameter, and Value specifies the value of the parameter.

All specified Values will be URL encoded by the class automatically. Consult the service documentation for details on the available parameters.

add_tag Method

Adds an item to the Tags properties.

Syntax

def add_tag(name: str, value: str) -> None: ...

Remarks

This method adds an item to the Tag* properties. Name specifies the name of the item, and Value specifies the value of the item.

authorize Method

Get the authorization string required to access the protected resource.

Syntax

def authorize() -> None: ...

Remarks

This method is used to get an access token that is required to access the protected resource. The method will act differently based on what is set in the o_auth_client_profile property and the o_auth_grant_type property. This method is not to be used in conjunction with the authorization property. It should instead be used when setting the OAuth* properties.

For more information, see the introduction section.

backup_secret Method

Backs up a secret.

Syntax

def backup_secret(secret_name: str) -> None: ...

Remarks

This method backs up the secret specified by SecretName, returning it in a protected form via the the specified local_file or the secret_data property.

Note that the protected secret cannot be used outside of Azure Key Vault, it must be restored to another vault using the restore_secret method in order to be used.

config Method

Sets or retrieves a configuration setting.

Syntax

def config(configuration_string: str) -> str: ...

Remarks

config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

create_secret Method

Creates a new secret.

Syntax

def create_secret(secret_name: str, content_type: str) -> str: ...

Remarks

This method creates a new secret with the given SecretName. If a secret with the specified SecretName already exists, a new version of it is created. The version Id of the newly-created secret is returned.

The secret value is taken from the specified local_file or the secret_data property. If the encode_data property is enabled, the value will be base64-encoded before it is sent.

The value passed for SecretName must consist solely of alphanumeric characters and hyphens (-).

The ContentType parameter is optional, and can be set to any string value.

If there are any items in the Tag* properties, they will be applied to the newly-created secret. Secrets may have up to 15 tags.

The following configuration settings can also be used to send additional values when creating the secret, refer to their documentation for more information:

• CreateSecretEnabled
• ExpiryDate
• NotBeforeDate

Note: If there is already a soft-deleted secret with the specified SecretName in the currently-selected vault, then a new secret cannot be created with the same name. To resolve such a situation, the soft-deleted secret would need to be recovered (using recover_secret) or permanently deleted (using purge_secret) first.

delete_secret Method

Deletes a secret.

Syntax

def delete_secret(secret_name: str) -> None: ...

Remarks

This method deletes the secret specified by SecretName. If there are multiple versions of the secret, all of them are deleted.

Note that the secret is only soft-deleted; it can be recovered during the retention period using the recover_secret method, or permanently deleted using the purge_secret method. The length of the retention period depends on the configuration of the currently-selected vault, refer to the Azure Key Vault documentation for more information.

do_events Method

Processes events from the internal message queue.

Syntax

def do_events() -> None: ...

Remarks

When do_events is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.

get_secret Method

Gets a secret's value and information.

Syntax

def get_secret(secret_name: str) -> None: ...

Remarks

This method gets the value and information for the secret specified by SecretName. The VersionId configuration setting can be used to target a specific secret version. The secret's value is returned via the specified local_file or the secret_data property.

Alternatively, the GetDeleted configuration setting can be enabled to get a soft-deleted secret's information (but not its value).

When the information is returned, the class clears the Secret* properties and repopulates them with a single item that contains the secret's information, and repopulates the Tag* properties with the secret's tags. The on_secret_list and on_tag_list events are also fired.

list_secrets Method

Lists the secrets in the currently-selected vault.

Syntax

def list_secrets() -> None: ...

Remarks

This method lists the secrets in the currently-selected vault. If the GetDeleted configuration setting is enabled, it lists the soft-deleted secrets in the vault instead.

Calling this method will fire the on_secret_list event once for each secret, and will also populate the Secret* properties.

If there are still more secrets available to list when this method returns, the secret_marker property will be populated. Continue to call this method until secret_marker is empty to accumulate all pages of results in the Secret* properties.

The MaxSecrets configuration setting can be used to control the maximum number of results to return at once.

list_versions Method

Lists versions of a secret.

Syntax

def list_versions(secret_name: str) -> None: ...

Remarks

This method lists the versions of the secret specified by SecretName.

Calling this method will fire the on_secret_list event once for each secret version, and will also populate the Secret* properties.

If there are still more secret versions available to list when this method returns, the version_marker property will be populated. Continue to call this method until version_marker is empty to accumulate all pages of results in the Secret* properties.

The MaxSecrets configuration setting can be used to control the maximum number of results to return at once.

purge_secret Method

Permanently deletes a soft-deleted secret.

Syntax

def purge_secret(secret_name: str) -> None: ...

Remarks

This method permanently deletes the soft-deleted secret specified by SecretName.

recover_secret Method

Recovers a soft-deleted secret.

Syntax

def recover_secret(secret_name: str) -> None: ...

Remarks

This method recovers the soft-deleted secret specified by SecretName.

reset Method

Resets the class to its initial state.

Syntax

def reset() -> None: ...

Remarks

This method resets the class to its initial state.

restore_secret Method

Restores a previously backed-up secret to the vault.

Syntax

def restore_secret() -> str: ...

Remarks

This method restores a secret previously backed up using backup_secret to the currently-selected vault. The secret is restored in its entirety, with all of its versions intact. However, note that the restore will fail if the secret's name is already in use. The name of the restored secret is returned.

The protected secret data to restore is taken from the the specified local_file or the secret_data property.

Note: There are certain restrictions on which vaults a secret can be restored to. In particular, a secret must be restored to a vault owned by the same Azure subscription that owned its original vault, and must be restored to a vault in the same geolocation as its original vault. Refer to the Azure Key Vault documentation for more information.

set_secret_enabled Method

Enables or disables a secret.

Syntax

def set_secret_enabled(secret_name: str, enabled: bool) -> None: ...

Remarks

This method enables or disables the secret specified by SecretName.

update_secret Method

Updates a secret's information.

Syntax

def update_secret(secret_name: str, content_type: str, update_tags: bool) -> None: ...

Remarks

This method updates the information for the secret specified by SecretName. The VersionId configuration setting can be used to target a specific secret version.

The ContentType parameter, if non-empty, can be any string value. If empty, the secret's current content type is left unchanged. (To explicitly clear the secret's content type, pass %CLEAR%).

The UpdateTags parameter determines whether the class replaces the secret's current tags with the items in the Tag* properties (which may be empty). Secrets may have up to 15 tags.

The ExpiryDate and NotBeforeDate configuration settings may also be used to send additional values, refer to their documentation for more information.

on_end_transfer Event

This event fires when a document finishes transferring.

Syntax

class AzureSecretsEndTransferEventParams(object):
  @property
  def direction() -> int: ...

# In class AzureSecrets:
@property
def on_end_transfer() -> Callable[[AzureSecretsEndTransferEventParams], None]: ...
@on_end_transfer.setter
def on_end_transfer(event_hook: Callable[[AzureSecretsEndTransferEventParams], None]) -> None: ...

Remarks

The on_end_transfer event is fired when the document text finishes transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

on_error Event

Information about errors during data delivery.

Syntax

class AzureSecretsErrorEventParams(object):
  @property
  def error_code() -> int: ...

  @property
  def description() -> str: ...

# In class AzureSecrets:
@property
def on_error() -> Callable[[AzureSecretsErrorEventParams], None]: ...
@on_error.setter
def on_error(event_hook: Callable[[AzureSecretsErrorEventParams], None]) -> None: ...

Remarks

The on_error event is fired in case of exceptional conditions during message processing. Normally the class fails with an error.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

on_header Event

This event is fired every time a header line comes in.

Syntax

class AzureSecretsHeaderEventParams(object):
  @property
  def field() -> str: ...

  @property
  def value() -> str: ...

# In class AzureSecrets:
@property
def on_header() -> Callable[[AzureSecretsHeaderEventParams], None]: ...
@on_header.setter
def on_header(event_hook: Callable[[AzureSecretsHeaderEventParams], None]) -> None: ...

Remarks

The Field parameter contains the name of the HTTP header (which is the same as it is delivered). The Value parameter contains the header contents.

If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).

on_log Event

This event fires once for each log message.

Syntax

class AzureSecretsLogEventParams(object):
  @property
  def log_level() -> int: ...

  @property
  def message() -> str: ...

  @property
  def log_type() -> str: ...

# In class AzureSecrets:
@property
def on_log() -> Callable[[AzureSecretsLogEventParams], None]: ...
@on_log.setter
def on_log(event_hook: Callable[[AzureSecretsLogEventParams], None]) -> None: ...

Remarks

This event fires once for each log message generated by the class. The verbosity is controlled by the LogLevel setting.

LogLevel indicates the level of message. Possible values are as follows:

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

Message is the log entry.

LogType identifies the type of log entry. Possible values are as follows:

• "Info"
• "RequestHeaders"
• "ResponseHeaders"
• "RequestBody"
• "ResponseBody"
• "ProxyRequest"
• "ProxyResponse"
• "FirewallRequest"
• "FirewallResponse"

on_secret_list Event

Fires once for each secret when listing secrets.

Syntax

class AzureSecretsSecretListEventParams(object):
  @property
  def name() -> str: ...

  @property
  def version_id() -> str: ...

  @property
  def content_type() -> str: ...

  @property
  def enabled() -> bool: ...

  @property
  def creation_date() -> int: ...

  @property
  def update_date() -> int: ...

  @property
  def deletion_date() -> int: ...

  @property
  def purge_date() -> int: ...

# In class AzureSecrets:
@property
def on_secret_list() -> Callable[[AzureSecretsSecretListEventParams], None]: ...
@on_secret_list.setter
def on_secret_list(event_hook: Callable[[AzureSecretsSecretListEventParams], None]) -> None: ...

Remarks

This event fires once for each secret (or secret version) returned when list_secrets, list_versions, or get_secret is called.

Name reflects the name of the secret.

VersionId reflects the Id of the secret version.

ContentType reflects the secret's content type.

Enabled reflects whether the secret is currently enabled.

CreationDate reflects the secret's creation date, in seconds since the Unix epoch.

UpdateDate reflects the secret's update date, in seconds since the Unix epoch.

DeletionDate reflects the secret's deletion date, in seconds since the Unix epoch, or -1 if the secret has not been deleted.

PurgeDate reflects the secret's purge (i.e., permanent deletion) date, in seconds since the Unix epoch, or -1 if the secret has not been deleted.

on_ssl_server_authentication Event

Fired after the server presents its certificate to the client.

Syntax

class AzureSecretsSSLServerAuthenticationEventParams(object):
  @property
  def cert_encoded() -> bytes: ...

  @property
  def cert_subject() -> str: ...

  @property
  def cert_issuer() -> str: ...

  @property
  def status() -> str: ...

  @property
  def accept() -> bool: ...
  @accept.setter
  def accept(value) -> None: ...

# In class AzureSecrets:
@property
def on_ssl_server_authentication() -> Callable[[AzureSecretsSSLServerAuthenticationEventParams], None]: ...
@on_ssl_server_authentication.setter
def on_ssl_server_authentication(event_hook: Callable[[AzureSecretsSSLServerAuthenticationEventParams], None]) -> None: ...

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

on_ssl_status Event

Shows the progress of the secure connection.

Syntax

class AzureSecretsSSLStatusEventParams(object):
  @property
  def message() -> str: ...

# In class AzureSecrets:
@property
def on_ssl_status() -> Callable[[AzureSecretsSSLStatusEventParams], None]: ...
@on_ssl_status.setter
def on_ssl_status(event_hook: Callable[[AzureSecretsSSLStatusEventParams], None]) -> None: ...

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

on_start_transfer Event

This event fires when a document starts transferring (after the headers).

Syntax

class AzureSecretsStartTransferEventParams(object):
  @property
  def direction() -> int: ...

# In class AzureSecrets:
@property
def on_start_transfer() -> Callable[[AzureSecretsStartTransferEventParams], None]: ...
@on_start_transfer.setter
def on_start_transfer(event_hook: Callable[[AzureSecretsStartTransferEventParams], None]) -> None: ...

Remarks

The on_start_transfer event is fired when the document text starts transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

on_tag_list Event

Fires once for each tag returned when a secret is retrieved.

Syntax

class AzureSecretsTagListEventParams(object):
  @property
  def secret_name() -> str: ...

  @property
  def version_id() -> str: ...

  @property
  def name() -> str: ...

  @property
  def value() -> str: ...

# In class AzureSecrets:
@property
def on_tag_list() -> Callable[[AzureSecretsTagListEventParams], None]: ...
@on_tag_list.setter
def on_tag_list(event_hook: Callable[[AzureSecretsTagListEventParams], None]) -> None: ...

Remarks

This event fires once for each tag returned when get_secret is called.

SecretName reflects the name of the secret.

VersionId reflects the Id of the secret version.

Name reflects the name of the tag.

Value reflects the value of the tag.

on_transfer Event

This event is fired while a document transfers (delivers document).

Syntax

class AzureSecretsTransferEventParams(object):
  @property
  def direction() -> int: ...

  @property
  def bytes_transferred() -> int: ...

  @property
  def percent_done() -> int: ...

  @property
  def text() -> bytes: ...

# In class AzureSecrets:
@property
def on_transfer() -> Callable[[AzureSecretsTransferEventParams], None]: ...
@on_transfer.setter
def on_transfer(event_hook: Callable[[AzureSecretsTransferEventParams], None]) -> None: ...

Remarks

The Text parameter contains the portion of the document text being received. It is empty if data are being posted to the server.

The BytesTransferred parameter contains the number of bytes transferred in this Direction since the beginning of the document text (excluding HTTP response headers).

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

AzureSecrets Config Settings

AzureSecrets Config Settings

<firstlevel>
  <one>value</one>
  <two>
    <item>first</item>
    <item>second</item>
  </two>
  <three>value three</three>
</firstlevel>

{
  "firstlevel": {
    "one": "value",
    "two": ["first", "second"],
    "three": "value three"
  }
}

HTTP Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Socket Config Settings

Base Config Settings

AzureSecrets Errors

Common Errors

The class may also return one of the following error codes, which are inherited from other classes.

HTTP Errors

The class may also return one of the following error codes, which are inherited from other classes.

TCPClient Errors

SSL Errors

TCP/IP Errors