GoogleSecrets Class

Properties   Methods   Events   Config Settings   Errors  

The GoogleSecrets class offers a simple interface for Google Secret Manager.

Syntax

cloudkeys.GoogleSecrets

Remarks

The GoogleSecrets class provides an easy-to-use interface for the Google Cloud Secret Manager service. Google Secret Manager allows you to securely store secrets (e.g., passwords, symmetric keys, etc.) in the cloud so that they aren't persisted locally. This class helps you to create, manage, and access these secrets.

To begin, register for a Google Cloud account. Set the GoogleProjectId property to your full Google Cloud project Id.

This class requires authentication via OAuth 2.0. First, perform OAuth authentication using the OAuth property to set the appropriate fields for the chosen ClientProfile and GrantType.

The class has the following defaults:

Authorization Server URL "https://accounts.google.com/o/oauth2/auth"
Token Server URL "https://accounts.google.com/o/oauth2/token"
Scopes "https://www.googleapis.com/auth/cloud-platform"
Below is a brief description of the different ClientProfile and GrantType values that are supported by this class. For a more in-depth description of what needs to be set, refer to the service documentation.

Application Profile

This profile encompasses the most basic grant types that OAuth supports. When this profile is set, all the requests and response handling is done by the class. Depending on the grant type, this may involve launching a browser so a user can login to authenticate with a authorization server. It may also involve starting an embedded web server to receive a response from a redirect.

To start the authentication and authorization process, the Authorize method should be called. If the authorization and authentication was successful, then the AccessToken field will be populated. Additionally, if a refresh token was provided the RefreshToken field will be populated as well. These values of the fields are for informational purposes. The class will also cache these tokens along with when the AccessToken will be expired. When a method that makes requests to the service provider is called or the Authorize method is called the class will automatically check to see if the access token is expired. If it is, it will then automatically try to get a new AccessToken. If the Authorize method was not used and user interaction would be required, the class will throw an error which can be caught. When user interaction is needed depends on what grant type is set in the GrantType field. To force the component to only check the access token when the Authorize method is called, the OAuthAutomaticRefresh configuration setting can be set to false.

A brief description of the supported values for the GrantType field are below. For more information, see the service documentation.

Authorization Code

When using the Authorization Code grant type, the class will use an authorization code to get an access token. For this GrantType the class expects a ClientId, ClientSecret, ServerAuthURL, and ServerTokenURL to be set. When the Authorize method is called, the component will start the embedded web server and launch the browser so the user can authorize the application. Once the user authorizes, the service provider will redirect them to the embedded web server and the class will parse the authorization code, setting the AuthorizationCode field, from the redirect. Immediately, the class will make a request to the token server to exchange the authorization code for an access token. The token server will return an access token and possibly a refresh token. If the RefreshToken field is set, or a refresh token is cached, then the class will not launch the browser and use the refresh token in its request to the token server instead of an authorization code.

Example: GoogleSecrets googlesecrets = new GoogleSecrets(); googlesecrets.OAuth.ClientProfile = CloudOAuthClientProfiles.cocpApplication; googlesecrets.OAuth.GrantType = OAuthSettingsGrantTypes.cogtAuthorizationCode; googlesecrets.OAuth.ClientId = CLIENT_ID; googlesecrets.OAuth.ClientSecret = CLIENT_SECRET; googlesecrets.Authorize();

Implicit

Note: This grant type is considered insecure and should only be used when necessary.

When using the Implicit grant type, the class will request the authorization server to get an access token. For this GrantType the class expects a ClientId, ClientSecret, and ServerAuthURL to be set. When the Authorize method is called, the component will start the embedded web server and launch the browser so the user can authorize the application. Once the user authorizes, the service provider will redirect them to the embedded web server and the class will parse the access token from the redirect.

A disadvantage of the grant type is that can not use a refresh token to silently get a new access token. Most service providers offer a way to silently get a new access token. See the service documentation for specifics. This means the class will not be able to automatically get a fresh token once it expires.

Web Profile

This profile is similar to setting the class to the Application profile and Authorization Code grant type except the class will not launch the browser. It is typically used in situations where there is a back-end that is supporting some front end. This profile expects that ClientId, ClientSecret, ServerAuthURL, ServerTokenURL, and the ReturnURL fields to be set. Before calling the Authorize method, the WebAuthURL field should be queried to get a URL. This URL should be used to redirect the user to the authorization page for the service provider. The redirect_uri parameter of this URL is mapped to the ReturnURL field. The ReturnURL field should be set to some web server that will parse the authorization code out of the query parameter from the redirect. Once the authorization code is parsed, it should be passed back to the server where it is then set to the AuthorizationCode field. Once that is set, the Authorize method can be called to exchange the authorization code for an access token and refresh token if provided. The class will then cache these values like normal and use them to make requests. If the RefreshToken field is set, or a refresh token is cached, then the Authorize method can immediately be called to make a request to the token server to get a new access token.

External OAuth Support

For complex profiles or grant types, or for more control of the flow, it is possible to perform OAuth authentication using the OAuth class or a separate process. Once complete you should have an authorization string which looks like:
Bearer ACCESS_TOKEN_VALUE

Assign this value to the Authorization property before attempting any operations. Setting the Authorization property will cause the class to ignore the values set in the OAuth property.

For Example: Oauth oauth = new Oauth(); oauth.ClientId = "CLIENT_ID"; oauth.ClientSecret = "CLIENT_SECRET"; oauth.AuthorizationScope = "https://www.googleapis.com/auth/cloud-platform"; oauth.ServerAuthURL = "https://accounts.google.com/o/oauth2/auth"; oauth.ServerTokenURL = "https://accounts.google.com/o/oauth2/token"; oauth.GrantType = OauthGrantTypes.ogtAuthorizationCode; googlesecrets.Authorization = oauth.GetAuthorization(); Consult the documentation for the service for more information about supported scope values and more details on OAuth authentication.

Using the Class

In Google Secret Manager, a secret is a container for one or more secret versions, which is where secret data is actually stored. The CreateSecret method will create a new secret and then add an initial secret version to it with the specified secret data. To change a secret's data, simply create a new version of it using the CreateVersion method. Each version of the secret receives a sequentially-assigned version Id, and the first version's Id is always 1.

To retrieve a secret's data, call the GetSecret method, and specify the specific version whose data should be retrieved (if no version is specified, the latest version's data is retrieved).

Secret versions that will no longer be used can have their data destroyed using the DestroyVersion method; the version itself will still exist, but its data will not. The DeleteSecret method can be used to completely delete a secret and all of its versions. // Create a secret. googlesecrets.SecretData = "Test123"; googlesecrets.CreateSecret("MySecret"); // Create a new version of the secret. googlesecrets.SecretData = "Cats456"; googlesecrets.CreateVersion("MySecret"); // Download the latest secret version's data to a local file. googlesecrets.LocalFile = "C:\temp\secret.txt"; googlesecrets.GetSecret("MySecret", ""); // Download a previous version's data to a local file. googlesecrets.LocalFile = "C:\temp\oldsecret.txt"; googlesecrets.GetSecret("MySecret", "1"); // Destroy an old secret version's data. googlesecrets.DestroyVersion("MySecret", "1"); // Completely delete a secret, and all of its versions. googlesecrets.DeleteSecret("MySecret");

To list secrets, use the ListSecrets method. To list a secret's versions, use the ListVersions method. // If there are many secrets to list, there may be multiple pages of results. This will // cause all pages of results to be accumulated into the Secrets collection property. do { googlesecrets.ListSecrets(); } while (!string.IsNullOrEmpty(googlesecrets.SecretMarker)); // A similar thing applies to secret versions as well. do { googlesecrets.ListVersions("MySecret"); } while (!string.IsNullOrEmpty(googlesecrets.VersionMarker));

The class also supports other functionality, including:

Property List


The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

AuthorizationOAuth 2.0 Authorization Token.
FirewallA set of properties related to firewall access.
GoogleProjectIdThe Id of the Google Cloud project to make requests against.
IdleThe current status of the class.
LabelsA collection of labels.
LocalFileThe local file to write data to, or whose data should be sent.
LocalHostThe name of the local host or user-assigned IP interface through which connections are initiated or accepted.
OAuthThis property holds the OAuth Settings.
OtherHeadersOther headers as determined by the user (optional).
OverwriteWhether the local file should be overwritten if necessary.
ParsedHeadersThis property includes a collection of headers returned from the last request.
ProxyA set of properties related to proxy access.
QueryParamsAdditional query parameters to be included in the request.
SecretDataThe secret data that was retrieved, or that should be sent.
SecretMarkerA marker indicating what page of secrets to return next.
SecretsA collection of secrets.
SSLAcceptServerCertInstructs the class to unconditionally accept the server certificate that matches the supplied certificate.
SSLCertThe certificate to be used during Secure Sockets Layer (SSL) negotiation.
SSLProviderThe Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.
SSLServerCertThe server certificate for the last established connection.
TimeoutThe timeout for the class.
VersionMarkerA marker indicating what page of secret versions to return next.

Method List


The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

AddLabelAdds an item to the Labels properties.
AddQueryParamAdds a query parameter to the QueryParams properties.
AuthorizeGet the authorization string required to access the protected resource.
ConfigSets or retrieves a configuration setting.
CreateSecretCreates a new secret.
CreateVersionCreates a new secret version.
DeleteSecretDeletes a secret.
DestroyVersionDestroys a secret version's data.
DoEventsThis method processes events from the internal message queue.
GetSecretRetrieves a secret version's data.
GetSecretInfoGets information about a secret.
GetVersionInfoGets information about a secret version.
ListSecretsLists the secrets in the project.
ListVersionsLists the secret versions for the specified secret.
ResetResets the class to its initial state.
SendCustomRequestSends a custom request to the server.
SetInputStreamSets the stream whose data should be sent.
SetOutputStreamSets the stream to which received data should be written.
SetVersionEnabledEnables or disables a secret version.
UpdateSecretLabelsUpdates a secret's labels.

Event List


The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

EndTransferThis event fires when a document finishes transferring.
ErrorFired when information is available about errors during data delivery.
HeaderFired every time a header line comes in.
LabelListFires once for each label returned when a secret's information is retrieved.
LogFired once for each log message.
SecretListFires once for each secret when listing secrets.
SSLServerAuthenticationFired after the server presents its certificate to the client.
SSLStatusFired when secure connection progress messages are available.
StartTransferThis event fires when a document starts transferring (after the headers).
TransferFired while a document transfers (delivers document).

Config Settings


The following is a list of config settings for the class with short descriptions. Click on the links for further details.

AccumulatePagesWhether the class should accumulate subsequent pages of results when listing them.
CloseInputStreamAfterProcessingWhether the specified input stream should be closed after data is read from it.
CloseOutputStreamAfterProcessingWhether the specified output stream should be closed after data is written to it.
CustomReplicationA custom replication configuration to send when creating a new secret.
MaxSecretsThe maximum number of results to return when listing secrets.
RawRequestReturns the data that was sent to the server.
RawResponseReturns the data that was received from the server.
XChildCountThe number of child elements of the current element.
XChildName[i]The name of the child element.
XChildXText[i]The inner text of the child element.
XElementThe name of the current element.
XParentThe parent of the current element.
XPathProvides a way to point to a specific element in the returned XML or JSON response.
XSubTreeA snapshot of the current element in the document.
XTextThe text of the current element.
OAuthAccessTokenExpirationThe lifetime of the access token.
OAuthAuthorizationTokenTypeThe type of access token returned.
OAuthAutomaticRefreshWhether or not to refresh an expired access token automatically.
OAuthBrowserResponseTimeoutSpecifies the amount of time to wait for a response from the browser.
OAuthIncludeEmptyRedirectURIWhether an empty redirect_uri parameter is included in requests.
OAuthJWTPayloadThe payload of the JWT access token if present.
OAuthJWTXChildCountThe number of child elements of the current element.
OauthJWTXChildName[i]The name of the child element.
OAuthJWTXChildXText[i]The inner text of the child element.
OAuthJWTXElementThe name of the current element.
OauthJWTXParentThe parent of the current element.
OAuthJWTXPathProvides a way to point to a specific element in the returned payload of a JWT based access token.
OAuthJWTXSubTreeA snapshot of the current element in the document.
OAuthJWTXTextThe text of the current element.
OAuthParamCountSpecifies the number of additional parameters variables to include in the request.
OAuthParamName[i]Specifies the parameter name at the specified index.
OAuthParamValue[i]Specifies the parameter value at the specified index.
OAuthPasswordGrantUsernameUsed in the Resource Owner Password grant type.
OAuthPKCEChallengeEncodingThe PKCE code challenge method to use.
OAuthPKCEVerifierThe PKCE verifier used to generate the challenge.
OAuthResetDataDetermines if the Reset method applies to the OAuth settings.
OAuthReUseWebServerDetermines if the same server instance is used between requests.
OAuthTransferredRequestThe full OAuth request last sent by the client.
OAuthUsePKCESpecifies if PKCE should be used.
OAuthWebServerActiveSpecifies and controls whether the embedded web server is active.
OAuthWebServerCertStoreThe certificate with private key to use when SSL is enabled.
OAuthWebServerCertStorePasswordThe certificate with private key to use when SSL is enabled.
OAuthWebServerCertStoreTypeThe certificate with private key to use when SSL is enabled.
OAuthWebServerCertSubjectThe certificate with private key to use when SSL is enabled.
OAuthWebServerFailedResponseThe custom response that will be displayed to the user if authentication failed.
OAuthWebServerHostThe hostname used by the embedded web server displayed in the ReturnURL.
OAuthWebServerPortThe local port on which the embedded web server listens.
OAuthWebServerResponseThe custom response that will be displayed to the user.
OAuthWebServerSSLEnabledWhether the web server requires SSL connections.
AcceptEncodingUsed to tell the server which types of content encodings the client supports.
AllowHTTPCompressionThis property enables HTTP compression for receiving data.
AllowHTTPFallbackWhether HTTP/2 connections are permitted to fallback to HTTP/1.1.
AllowNTLMFallbackWhether to allow fallback from Negotiate to NTLM when authenticating.
AppendWhether to append data to LocalFile.
AuthorizationThe Authorization string to be sent to the server.
BytesTransferredContains the number of bytes transferred in the response data.
ChunkSizeSpecifies the chunk size in bytes when using chunked encoding.
CompressHTTPRequestSet to true to compress the body of a PUT or POST request.
EncodeURLIf set to True the URL will be encoded by the class.
FollowRedirectsDetermines what happens when the server issues a redirect.
GetOn302RedirectIf set to True the class will perform a GET on the new location.
HTTP2HeadersWithoutIndexingHTTP2 headers that should not update the dynamic header table with incremental indexing.
HTTPVersionThe version of HTTP used by the class.
IfModifiedSinceA date determining the maximum age of the desired document.
KeepAliveDetermines whether the HTTP connection is closed after completion of the request.
KerberosSPNThe Service Principal Name for the Kerberos Domain Controller.
LogLevelThe level of detail that is logged.
MaxHeadersInstructs class to save the amount of headers specified that are returned by the server after a Header event has been fired.
MaxHTTPCookiesInstructs class to save the amount of cookies specified that are returned by the server when a SetCookie event is fired.
MaxRedirectAttemptsLimits the number of redirects that are followed in a request.
NegotiatedHTTPVersionThe negotiated HTTP version.
OtherHeadersOther headers as determined by the user (optional).
ProxyAuthorizationThe authorization string to be sent to the proxy server.
ProxyAuthSchemeThe authorization scheme to be used for the proxy.
ProxyPasswordA password if authentication is to be used for the proxy.
ProxyPortPort for the proxy server (default 80).
ProxyServerName or IP address of a proxy server (optional).
ProxyUserA user name if authentication is to be used for the proxy.
SentHeadersThe full set of headers as sent by the client.
StatusCodeThe status code of the last response from the server.
StatusLineThe first line of the last response from the server.
TransferredDataThe contents of the last response from the server.
TransferredDataLimitThe maximum number of incoming bytes to be stored by the class.
TransferredHeadersThe full set of headers as received from the server.
TransferredRequestThe full request as sent by the client.
UseChunkedEncodingEnables or Disables HTTP chunked encoding for transfers.
UseIDNsWhether to encode hostnames to internationalized domain names.
UsePlatformDeflateWhether to use the platform implementation to decompress compressed responses.
UsePlatformHTTPClientWhether or not to use the platform HTTP client.
UseProxyAutoConfigURLWhether to use a Proxy auto-config file when attempting a connection.
UserAgentInformation about the user agent (browser).
CloseStreamAfterTransferIf true, the class will close the upload or download stream after the transfer.
ConnectionTimeoutSets a separate timeout value for establishing a connection.
FirewallAutoDetectTells the class whether or not to automatically detect and use firewall system settings, if available.
FirewallHostName or IP address of firewall (optional).
FirewallListenerIf true, the class binds to a SOCKS firewall as a server (TCPClient only).
FirewallPasswordPassword to be used if authentication is to be used when connecting through the firewall.
FirewallPortThe TCP port for the FirewallHost;.
FirewallTypeDetermines the type of firewall to connect through.
FirewallUserA user name if authentication is to be used connecting through a firewall.
KeepAliveIntervalThe retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTimeThe inactivity time in milliseconds before a TCP keep-alive packet is sent.
LingerWhen set to True, connections are terminated gracefully.
LingerTimeTime in seconds to have the connection linger.
LocalHostThe name of the local host through which connections are initiated or accepted.
LocalPortThe port in the local host where the class binds.
MaxLineLengthThe maximum amount of data to accumulate when no EOL is found.
MaxTransferRateThe transfer rate limit in bytes per second.
ProxyExceptionsListA semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAliveDetermines whether or not the keep alive socket option is enabled.
TcpNoDelayWhether or not to delay when sending packets.
UseIPv6Whether to use IPv6.
UseNTLMv2Whether to use NTLM V2.
LogSSLPacketsControls whether SSL packets are logged when using the internal security API.
ReuseSSLSessionDetermines if the SSL session is reused.
SSLCACertsA newline separated list of CA certificates to be included when performing an SSL handshake.
SSLCheckCRLWhether to check the Certificate Revocation List for the server certificate.
SSLCheckOCSPWhether to use OCSP to check the status of the server certificate.
SSLCipherStrengthThe minimum cipher strength used for bulk encryption.
SSLClientCACertsA newline separated list of CA certificates to use during SSL client certificate validation.
SSLContextProtocolThe protocol used when getting an SSLContext instance.
SSLEnabledCipherSuitesThe cipher suite to be used in an SSL negotiation.
SSLEnabledProtocolsUsed to enable/disable the supported security protocols.
SSLEnableRenegotiationWhether the renegotiation_info SSL extension is supported.
SSLIncludeCertChainWhether the entire certificate chain is included in the SSLServerAuthentication event.
SSLKeyLogFileThe location of a file where per-session secrets are written for debugging purposes.
SSLNegotiatedCipherReturns the negotiated cipher suite.
SSLNegotiatedCipherStrengthReturns the negotiated cipher suite strength.
SSLNegotiatedCipherSuiteReturns the negotiated cipher suite.
SSLNegotiatedKeyExchangeReturns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrengthReturns the negotiated key exchange algorithm strength.
SSLNegotiatedVersionReturns the negotiated protocol version.
SSLServerCACertsA newline separated list of CA certificates to use during SSL server certificate validation.
SSLTrustManagerFactoryAlgorithmThe algorithm to be used to create a TrustManager through TrustManagerFactory.
TLS12SignatureAlgorithmsDefines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.
TLS12SupportedGroupsThe supported groups for ECC.
TLS13KeyShareGroupsThe groups for which to pregenerate key shares.
TLS13SignatureAlgorithmsThe allowed certificate signature algorithms.
TLS13SupportedGroupsThe supported groups for (EC)DHE key exchange.
AbsoluteTimeoutDetermines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallDataUsed to send extra data to the firewall.
InBufferSizeThe size in bytes of the incoming queue of the socket.
OutBufferSizeThe size in bytes of the outgoing queue of the socket.
BuildInfoInformation about the product's build.
GUIAvailableWhether or not a message loop is available for processing events.
LicenseInfoInformation about the current license.
MaskSensitiveDataWhether sensitive data is masked in log messages.
UseDaemonThreadsWhether threads created by the class are daemon threads.
UseFIPSCompliantAPITells the class whether or not to use FIPS certified APIs.
UseInternalSecurityAPIWhether or not to use the system security libraries or an internal implementation.

Authorization Property (GoogleSecrets Class)

OAuth 2.0 Authorization Token.

Syntax

public String getAuthorization();
public void setAuthorization(String authorization);

Default Value

""

Remarks

This class supports authentication via OAuth 2.0. First, perform OAuth authentication using the OAuth class or a separate process. Once complete you should have an authorization string which looks like:

Bearer ACCESS_TOKEN
Assign this value to the Authorization property before attempting any operations. Consult the documentation for the service for more information about supported scope values and more details on OAuth authentication.

Firewall Property (GoogleSecrets Class)

A set of properties related to firewall access.

Syntax

public Firewall getFirewall();
public void setFirewall(Firewall firewall);

Remarks

This is a Firewall-type property, which contains fields describing the firewall through which the class will attempt to connect.

Please refer to the Firewall type for a complete list of fields.

GoogleProjectId Property (GoogleSecrets Class)

The Id of the Google Cloud project to make requests against.

Syntax

public String getGoogleProjectId();
public void setGoogleProjectId(String googleProjectId);

Default Value

""

Remarks

This property specifies the Id of the Google Cloud project that the class should make requests against; it must be set before attempting any operations.

Note that the full Google Cloud project Id must be specified, not just the project number.

This property is not available at design time.

Idle Property (GoogleSecrets Class)

The current status of the class.

Syntax

public boolean isIdle();

Default Value

True

Remarks

This property will be False if the component is currently busy (communicating or waiting for an answer), and True at all other times.

This property is read-only.

Labels Property (GoogleSecrets Class)

A collection of labels.

Syntax

public GoogleLabelList getLabels();
public void setLabels(GoogleLabelList labels);

Remarks

This collection holds a list of GoogleLabel items.

Calling AddLabel or GetSecretInfo will populate this collection. The items in this collection are used by the CreateSecret and UpdateSecretLabels methods.

This property is not available at design time.

Please refer to the GoogleLabel type for a complete list of fields.

LocalFile Property (GoogleSecrets Class)

The local file to write data to, or whose data should be sent.

Syntax

public String getLocalFile();
public void setLocalFile(String localFile);

Default Value

""

Remarks

This property specifies the location of a local file on disk. This is used as the source file when calling CreateSecret, and as the destination file when calling GetSecret.

Note: Setting this property to a non-empty value will discard and streams set using SetInputStream and SetOutputStream. Similarly, passing a non-null value to either of those methods will clear this property.

LocalHost Property (GoogleSecrets Class)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

public String getLocalHost();
public void setLocalHost(String localHost);

Default Value

""

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

OAuth Property (GoogleSecrets Class)

This property holds the OAuth Settings.

Syntax

public OAuthSettings getOAuth();

Remarks

This property is used to define the necessary fields to authenticate with the service provider. See the introduction for more information.

This property is read-only and not available at design time.

Please refer to the OAuthSettings type for a complete list of fields.

OtherHeaders Property (GoogleSecrets Class)

Other headers as determined by the user (optional).

Syntax

public String getOtherHeaders();
public void setOtherHeaders(String otherHeaders);

Default Value

""

Remarks

This property can be set to a string of headers to be appended to the HTTP request headers created from other properties like ContentType and From.

The headers must follow the format Header: Value as described in the HTTP specifications. Header lines should be separated by CRLF ("\r\n") .

Use this property with caution. If this property contains invalid headers, HTTP requests may fail.

This property is useful for extending the functionality of the class beyond what is provided.

This property is not available at design time.

Overwrite Property (GoogleSecrets Class)

Whether the local file should be overwritten if necessary.

Syntax

public boolean isOverwrite();
public void setOverwrite(boolean overwrite);

Default Value

False

Remarks

This property controls whether the specified LocalFile should be overwritten if it already exists.

This property is not available at design time.

ParsedHeaders Property (GoogleSecrets Class)

This property includes a collection of headers returned from the last request.

Syntax

public HeaderList getParsedHeaders();

Remarks

This property contains a collection of headers returned from the last request. Whenever headers are returned from the server, the headers are parsed into a collection of headers. Each Header in this collection contains information describing that header.

MaxHeaders can be used to control the maximum number of headers saved.

This collection is indexed from 0 to size -1.

This property is read-only and not available at design time.

Please refer to the Header type for a complete list of fields.

Proxy Property (GoogleSecrets Class)

A set of properties related to proxy access.

Syntax

public Proxy getProxy();
public void setProxy(Proxy proxy);

Remarks

This property contains fields describing the proxy through which the class will attempt to connect.

Please refer to the Proxy type for a complete list of fields.

QueryParams Property (GoogleSecrets Class)

Additional query parameters to be included in the request.

Syntax

public QueryParamList getQueryParams();
public void setQueryParams(QueryParamList queryParams);

Remarks

This is a collection of query parameters that will be added to the request. Parameters can be added via the AddQueryParam method.

Please refer to the QueryParam type for a complete list of fields.

SecretData Property (GoogleSecrets Class)

The secret data that was retrieved, or that should be sent.

Syntax

public byte[] getSecretData();
public void setSecretData(byte[] secretData);

Default Value

""

Remarks

This property is populated with secret data after calling GetSecret if SetOutputStream and LocalFile are not set.

This property can also be set before calling CreateSecret; its data will be sent if SetInputStream and LocalFile are not set.

This property is not available at design time.

SecretMarker Property (GoogleSecrets Class)

A marker indicating what page of secrets to return next.

Syntax

public String getSecretMarker();
public void setSecretMarker(String secretMarker);

Default Value

""

Remarks

This property will be populated when ListSecrets is called if the results are paged and there are more pages. To list all secrets, continue to call ListSecrets until this property returns empty string.

Refer to ListSecrets for more information.

This property is not available at design time.

Secrets Property (GoogleSecrets Class)

A collection of secrets.

Syntax

public GoogleSecretList getSecrets();

Remarks

This collection holds a list of GoogleSecret items.

Calling GetSecretInfo, ListSecrets, GetVersionInfo, or ListVersions will populate this collection.

This property is read-only and not available at design time.

Please refer to the GoogleSecret type for a complete list of fields.

SSLAcceptServerCert Property (GoogleSecrets Class)

Instructs the class to unconditionally accept the server certificate that matches the supplied certificate.

Syntax

public Certificate getSSLAcceptServerCert();
public void setSSLAcceptServerCert(Certificate SSLAcceptServerCert);

Remarks

If it finds any issues with the certificate presented by the server, the class will normally terminate the connection with an error.

You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally.

Note: This functionality is provided only for cases in which you otherwise know that you are communicating with the right server. If used improperly, this property may create a security breach. Use it at your own risk.

Please refer to the Certificate type for a complete list of fields.

SSLCert Property (GoogleSecrets Class)

The certificate to be used during Secure Sockets Layer (SSL) negotiation.

Syntax

public Certificate getSSLCert();
public void setSSLCert(Certificate SSLCert);

Remarks

This property includes the digital certificate that the class will use during SSL negotiation. Set this property to a valid certificate before starting SSL negotiation. To set a certificate, you may set the Encoded field to the encoded certificate. To select a certificate, use the store and subject fields.

Please refer to the Certificate type for a complete list of fields.

SSLProvider Property (GoogleSecrets Class)

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax

public int getSSLProvider();
public void setSSLProvider(int SSLProvider);

Enumerated values:
  public final static int sslpAutomatic = 0;
  public final static int sslpPlatform = 1;
  public final static int sslpInternal = 2;

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:

0 (sslpAutomatic - default)Automatically selects the appropriate implementation.
1 (sslpPlatform) Uses the platform/system implementation.
2 (sslpInternal) Uses the internal implementation.
Additional Notes

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected, the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used.

SSLServerCert Property (GoogleSecrets Class)

The server certificate for the last established connection.

Syntax

public Certificate getSSLServerCert();

Remarks

This property contains the server certificate for the last established connection.

SSLServerCert is reset every time a new connection is attempted.

This property is read-only.

Please refer to the Certificate type for a complete list of fields.

Timeout Property (GoogleSecrets Class)

The timeout for the class.

Syntax

public int getTimeout();
public void setTimeout(int timeout);

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the class will wait for the operation to complete before returning control.

The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the class throws an exception.

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

VersionMarker Property (GoogleSecrets Class)

A marker indicating what page of secret versions to return next.

Syntax

public String getVersionMarker();
public void setVersionMarker(String versionMarker);

Default Value

""

Remarks

This property will be populated when ListVersions is called if the results are paged and there are more pages. To list all secret versions, continue to call ListVersions until this property returns empty string.

Refer to ListVersions for more information.

This property is not available at design time.

AddLabel Method (GoogleSecrets Class)

Adds an item to the Labels properties.

Syntax

public void addLabel(String name, String value);

Remarks

This method adds an item to the Labels collection. Name specifies the name of the item, and Value specifies the value of the item.

A resource may have up to 64 labels. Label names and values must consist solely of lowercase letters, numbers, underscores, and hyphens; and may be up to 63 characters in length. Label names must also be unique and begin with a lowercase letter.

AddQueryParam Method (GoogleSecrets Class)

Adds a query parameter to the QueryParams properties.

Syntax

public void addQueryParam(String name, String value);

Remarks

This method is used to add a query parameter to the QueryParams collection. Name specifies the name of the parameter, and Value specifies the value of the parameter.

All specified Values will be URL encoded by the class automatically. Consult the service documentation for details on the available parameters.

Authorize Method (GoogleSecrets Class)

Get the authorization string required to access the protected resource.

Syntax

public void authorize();

Remarks

This method is used to get an access token that is required to access the protected resource. The method will act differently based on what is set in the ClientProfile field and the GrantType field. This method is not to be used in conjunction with the Authorization property. It should instead be used when setting the OAuth property.

For more information, see the introduction section.

Config Method (GoogleSecrets Class)

Sets or retrieves a configuration setting.

Syntax

public String config(String configurationString);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

CreateSecret Method (GoogleSecrets Class)

Creates a new secret.

Syntax

public void createSecret(String secretName);

Remarks

This method creates a new secret with the given SecretName. The secret data is taken from the input stream supplied via the SetInputStream method, the specified LocalFile, or the SecretData property; it may be up to 65536 bytes in length.

The value passed for SecretName must consist solely of alphanumeric characters, hyphens (-), and underscores (_); and may be up to 255 characters in length.

If there are any items in the Labels collection, they will be applied to the newly-created secret. Secrets may have up to 64 labels.

Note that this method makes two requests: the first one creates the empty secret itself (which is just a container for secret versions), and the second one creates an initial secret version with the actual secret data (as if CreateVersion had been called). The Id of the initial secret version is always 1.

CreateVersion Method (GoogleSecrets Class)

Creates a new secret version.

Syntax

public String createVersion(String secretName);

Remarks

This method creates a new version of the secret specified by SecretName. The secret data is taken from the input stream supplied via the SetInputStream method, the specified LocalFile, or the SecretData property; it may be up to 65536 bytes in length.

DeleteSecret Method (GoogleSecrets Class)

Deletes a secret.

Syntax

public void deleteSecret(String secretName);

Remarks

This method permanently deletes a secret and all of its versions.

To make individual versions inaccessible (either temporarily or permanently), use the SetVersionEnabled or DestroyVersion method instead.

DestroyVersion Method (GoogleSecrets Class)

Destroys a secret version's data.

Syntax

public void destroyVersion(String secretName, String versionId);

Remarks

This method permanently destroys the secret data held by the secret version specified by SecretName and VersionId. The secret version itself remains in existence, but its State changes to DESTROYED and attempting to call GetSecret on it will result in an error.

To make a secret version's data temporarily inaccessible, use the SetVersionEnabled method instead.

DoEvents Method (GoogleSecrets Class)

This method processes events from the internal message queue.

Syntax

public void doEvents();

Remarks

When DoEvents is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.

GetSecret Method (GoogleSecrets Class)

Retrieves a secret version's data.

Syntax

public void getSecret(String secretName, String versionId);

Remarks

This method retrieves the secret data held by the secret version specified by SecretName and VersionId. If empty string is passed for VersionId, the latest secret version's data will be retrieved.

The secret data is returned via the output stream supplied via the SetOutputStream method, the specified LocalFile, or the SecretData property.

Note that a secret version's data can only be retrieved if it is in the ENABLED State.

GetSecretInfo Method (GoogleSecrets Class)

Gets information about a secret.

Syntax

public void getSecretInfo(String secretName);

Remarks

This method gets information about the secret specified by SecretName.

When the information is returned, the class clears the Secrets collection and repopulates it collection. The SecretList and LabelList events are also fired.

GetVersionInfo Method (GoogleSecrets Class)

Gets information about a secret version.

Syntax

public void getVersionInfo(String secretName, String versionId);

Remarks

This method gets information about the secret version specified by SecretName and VersionId. If empty string is passed for VersionId, the latest secret version's data will be retrieved.

When the information is returned, the class clears the Secrets collection and repopulates it with a single item that contains the secret version's information. The SecretList event is also fired.

ListSecrets Method (GoogleSecrets Class)

Lists the secrets in the project.

Syntax

public void listSecrets();

Remarks

This method lists the secrets in the Google Cloud project selected by GoogleProjectId.

Calling this method will fire the SecretList event once for each secret, and will also populate the Secrets collection.

If there are still more secrets available to list when this method returns, the SecretMarker property will be populated. Continue to call this method until SecretMarker is empty to accumulate all pages of results in the Secrets collection.

The MaxSecrets configuration setting can be used to control the maximum number of results to return at once.

ListVersions Method (GoogleSecrets Class)

Lists the secret versions for the specified secret.

Syntax

public void listVersions(String secretName);

Remarks

This method lists the secret versions for the secret specified by SecretName.

Calling this method will fire the SecretList event once for each secret version, and will also populate the Secrets collection.

If there are still more secret versions available to list when this method returns, the VersionMarker property will be populated. Continue to call this method until VersionMarker is empty to accumulate all pages of results in the Secrets collection.

The MaxSecrets configuration setting can be used to control the maximum number of results to return at once.

Reset Method (GoogleSecrets Class)

Resets the class to its initial state.

Syntax

public void reset();

Remarks

This method resets the class to its initial state.

SendCustomRequest Method (GoogleSecrets Class)

Sends a custom request to the server.

Syntax

public void sendCustomRequest(String httpMethod, String secretName, String versionId, String action, String body);

Remarks

This method can be used to send arbitrary requests to the server.

Valid values for HttpMethod are:

  • GET (default if empty)
  • HEAD
  • POST
  • PUT
  • PATCH
  • DELETE

SecretName, VersionId, Action, and Body are optional. If SecretName is empty, VersionId will be ignored.

When this method is called, the class does the following:

  1. Builds a request URL, including query parameters, like https://secretmanager.googleapis.com/v1/projects/{GoogleProjectId}[/secrets/{SecretName}[/versions/{VersionId}]][{Action}] using:
  2. Adds an Authorization header with the value specified by Authorization.
  3. Adds any request headers from OtherHeaders.
  4. Adds the specified request Body, if non-empty.
  5. Sends the request to the server.
  6. Stores the response headers in the ParsedHeaders collection; and the response body in the stream specified using SetOutputStream, the specified LocalFile, or SecretData.

If the response body is JSON data, the XPath, XText, and other X* configuration settings can then be used to navigate and extract information from it.

SetInputStream Method (GoogleSecrets Class)

Sets the stream whose data should be sent.

Syntax

public void setInputStream(java.io.InputStream inputStream);

Remarks

This method sets the stream whose data should be sent when CreateSecret is called.

Note: Passing a non-null value for InputStream will cause the LocalFile property to be cleared. Similarly, setting LocalFile to a non-empty value will discard any stream set using this method.

SetOutputStream Method (GoogleSecrets Class)

Sets the stream to which received data should be written.

Syntax

public void setOutputStream(java.io.OutputStream outputStream);

Remarks

This method sets the stream to which data should be written when GetSecret is called.

Note: Passing a non-null value for OutputStream will cause the LocalFile property to be cleared. Similarly, setting LocalFile to a non-empty value will discard any stream set using this method.

SetVersionEnabled Method (GoogleSecrets Class)

Enables or disables a secret version.

Syntax

public void setVersionEnabled(String secretName, String versionId, boolean enabled);

Remarks

This method enables or disables the secret version specified by SecretName and VersionId.

UpdateSecretLabels Method (GoogleSecrets Class)

Updates a secret's labels.

Syntax

public void updateSecretLabels(String secretName);

Remarks

This method updates the labels of the secret specified by SecretName, replacing any which currently exist with those in the Labels collection (which can be empty).

EndTransfer Event (GoogleSecrets Class)

This event fires when a document finishes transferring.

Syntax

public class DefaultGoogleSecretsEventListener implements GoogleSecretsEventListener {
  ...
  public void endTransfer(GoogleSecretsEndTransferEvent e) {}
  ...
}

public class GoogleSecretsEndTransferEvent {
  public int direction;
}

Remarks

The EndTransfer event is fired when the document text finishes transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Error Event (GoogleSecrets Class)

Fired when information is available about errors during data delivery.

Syntax

public class DefaultGoogleSecretsEventListener implements GoogleSecretsEventListener {
  ...
  public void error(GoogleSecretsErrorEvent e) {}
  ...
}

public class GoogleSecretsErrorEvent {
  public int errorCode;
  public String description;
}

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class throws an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Header Event (GoogleSecrets Class)

Fired every time a header line comes in.

Syntax

public class DefaultGoogleSecretsEventListener implements GoogleSecretsEventListener {
  ...
  public void header(GoogleSecretsHeaderEvent e) {}
  ...
}

public class GoogleSecretsHeaderEvent {
  public String field;
  public String value;
}

Remarks

The Field parameter contains the name of the HTTP header (which is the same as it is delivered). The Value parameter contains the header contents.

If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).

LabelList Event (GoogleSecrets Class)

Fires once for each label returned when a secret's information is retrieved.

Syntax

public class DefaultGoogleSecretsEventListener implements GoogleSecretsEventListener {
  ...
  public void labelList(GoogleSecretsLabelListEvent e) {}
  ...
}

public class GoogleSecretsLabelListEvent {
  public String secretName;
  public String name;
  public String value;
}

Remarks

This event fires once for each label returned when GetSecretInfo is called.

SecretName reflects the name of the key.

Name reflects the name of the label.

Value reflects the value of the label.

Log Event (GoogleSecrets Class)

Fired once for each log message.

Syntax

public class DefaultGoogleSecretsEventListener implements GoogleSecretsEventListener {
  ...
  public void log(GoogleSecretsLogEvent e) {}
  ...
}

public class GoogleSecretsLogEvent {
  public int logLevel;
  public String message;
  public String logType;
}

Remarks

This event is fired once for each log message generated by the class. The verbosity is controlled by the LogLevel setting.

LogLevel indicates the level of message. Possible values are as follows:

0 (None) No events are logged.
1 (Info - default) Informational events are logged.
2 (Verbose) Detailed data are logged.
3 (Debug) Debug data are logged.

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

Message is the log entry.

LogType identifies the type of log entry. Possible values are as follows:

  • "Info"
  • "RequestHeaders"
  • "ResponseHeaders"
  • "RequestBody"
  • "ResponseBody"
  • "ProxyRequest"
  • "ProxyResponse"
  • "FirewallRequest"
  • "FirewallResponse"

SecretList Event (GoogleSecrets Class)

Fires once for each secret when listing secrets.

Syntax

public class DefaultGoogleSecretsEventListener implements GoogleSecretsEventListener {
  ...
  public void secretList(GoogleSecretsSecretListEvent e) {}
  ...
}

public class GoogleSecretsSecretListEvent {
  public String name;
  public String versionId;
  public String state;
  public String creationDate;
  public String destructionDate;
}

Remarks

This event fires once for each secret or secret version returned when GetSecretInfo, ListSecrets, GetVersionInfo, or ListVersions is called. Note that for secrets, only the Name and CreationDate parameters will be populated.

Name reflects the name of the secret.

VersionId reflects the Id of the secret version.

State reflects the state of the secret version.

CreationDate reflects the creation date of the secret or secret version, formatted as an RFC 3339 UTC timestamp.

DestructionDate reflects the destruction date of the secret version, formatted as an RFC 3339 UTC timestamp, or empty if the secret version has not been destroyed.

SSLServerAuthentication Event (GoogleSecrets Class)

Fired after the server presents its certificate to the client.

Syntax

public class DefaultGoogleSecretsEventListener implements GoogleSecretsEventListener {
  ...
  public void SSLServerAuthentication(GoogleSecretsSSLServerAuthenticationEvent e) {}
  ...
}

public class GoogleSecretsSSLServerAuthenticationEvent {
  public byte[] certEncoded;
  public String certSubject;
  public String certIssuer;
  public String status;
  public boolean accept; //read-write
}

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (GoogleSecrets Class)

Fired when secure connection progress messages are available.

Syntax

public class DefaultGoogleSecretsEventListener implements GoogleSecretsEventListener {
  ...
  public void SSLStatus(GoogleSecretsSSLStatusEvent e) {}
  ...
}

public class GoogleSecretsSSLStatusEvent {
  public String message;
}

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

StartTransfer Event (GoogleSecrets Class)

This event fires when a document starts transferring (after the headers).

Syntax

public class DefaultGoogleSecretsEventListener implements GoogleSecretsEventListener {
  ...
  public void startTransfer(GoogleSecretsStartTransferEvent e) {}
  ...
}

public class GoogleSecretsStartTransferEvent {
  public int direction;
}

Remarks

The StartTransfer event is fired when the document text starts transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Transfer Event (GoogleSecrets Class)

Fired while a document transfers (delivers document).

Syntax

public class DefaultGoogleSecretsEventListener implements GoogleSecretsEventListener {
  ...
  public void transfer(GoogleSecretsTransferEvent e) {}
  ...
}

public class GoogleSecretsTransferEvent {
  public int direction;
  public long bytesTransferred;
  public int percentDone;
  public byte[] text;
}

Remarks

The Text parameter contains the portion of the document text being received. It is empty if data are being posted to the server.

The BytesTransferred parameter contains the number of bytes transferred in this Direction since the beginning of the document text (excluding HTTP response headers).

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Certificate Type

This is the digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

The following fields are available:

Fields

EffectiveDate
String (read-only)

Default Value: ""

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

ExpirationDate
String (read-only)

Default Value: ""

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

ExtendedKeyUsage
String (read-only)

Default Value: ""

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

Fingerprint
String (read-only)

Default Value: ""

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

FingerprintSHA1
String (read-only)

Default Value: ""

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

FingerprintSHA256
String (read-only)

Default Value: ""

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

Issuer
String (read-only)

Default Value: ""

The issuer of the certificate. This field contains a string representation of the name of the issuing authority for the certificate.

KeyPassword
String

Default Value: ""

The password for the certificate's private key (if any).

Some certificate stores may individually protect certificates' private keys, separate from the standard protection offered by the StorePassword. This field can be used to read such password-protected private keys.

Note: This property defaults to the value of StorePassword. To clear it, you must set the property to the empty string (""). It can be set at any time, but when the private key's password is different from the store's password, then it must be set before calling PrivateKey.

PrivateKey
String (read-only)

Default Value: ""

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The PrivateKey may be available but not exportable. In this case, PrivateKey returns an empty string.

PrivateKeyAvailable
boolean (read-only)

Default Value: False

Whether a PrivateKey is available for the selected certificate. If PrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

PrivateKeyContainer
String (read-only)

Default Value: ""

The name of the PrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

PublicKey
String (read-only)

Default Value: ""

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

PublicKeyAlgorithm
String (read-only)

Default Value: ""

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

PublicKeyLength
int (read-only)

Default Value: 0

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

SerialNumber
String (read-only)

Default Value: ""

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

SignatureAlgorithm
String (read-only)

Default Value: ""

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

Store
String

Default Value: "MY"

The name of the certificate store for the client certificate.

The StoreType field denotes the type of the certificate store specified by Store. If the store is password-protected, specify the password in StorePassword.

Store is used in conjunction with the Subject field to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject field for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

StoreB
byte[]

Default Value: "MY"

The name of the certificate store for the client certificate.

The StoreType field denotes the type of the certificate store specified by Store. If the store is password-protected, specify the password in StorePassword.

Store is used in conjunction with the Subject field to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject field for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

StorePassword
String

Default Value: ""

If the type of certificate store requires a password, this field is used to specify the password needed to open the certificate store.

StoreType
int

Default Value: 0

The type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This field can take one of the following values:

0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user.

Note: This store type is not available in Java.

1 (cstMachine)For Windows, this specifies that the certificate store is a machine store.

Note: This store type is not available in Java.

2 (cstPFXFile)The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates.

Note: This store type is only available in Java.

5 (cstJKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.

Note: This store type is only available in Java.

6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).

Note: This store type is only available in Java and .NET.

22 (cstBCFKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.

Note: This store type is only available in Java and .NET.

23 (cstPKCS11)The certificate is present on a physical security key accessible via a PKCS#11 interface.

To use a security key, the necessary data must first be collected using the CERTMGR class. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN.

Code Example. SSH Authentication with Security Key: certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

SubjectAltNames
String (read-only)

Default Value: ""

Comma-separated lists of alternative subject names for the certificate.

ThumbprintMD5
String (read-only)

Default Value: ""

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA1
String (read-only)

Default Value: ""

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA256
String (read-only)

Default Value: ""

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

Usage
String (read-only)

Default Value: ""

The text description of UsageFlags.

This value will be one or more of the following strings and will be separated by commas:

  • Digital Signature
  • Non-Repudiation
  • Key Encipherment
  • Data Encipherment
  • Key Agreement
  • Certificate Signing
  • CRL Signing
  • Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

UsageFlags
int (read-only)

Default Value: 0

The flags that show intended use for the certificate. The value of UsageFlags is a combination of the following flags:

0x80Digital Signature
0x40Non-Repudiation
0x20Key Encipherment
0x10Data Encipherment
0x08Key Agreement
0x04Certificate Signing
0x02CRL Signing
0x01Encipher Only

Please see the Usage field for a text representation of UsageFlags.

This functionality currently is not available when the provider is OpenSSL.

Version
String (read-only)

Default Value: ""

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

Subject
String

Default Value: ""

The subject of the certificate used for client authentication.

This field will be populated with the full subject of the loaded certificate. When loading a certificate, the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

FieldMeaning
CNCommon Name. This is commonly a hostname like www.server.com.
OOrganization
OUOrganizational Unit
LLocality
SState
CCountry
EEmail Address

If a field value contains a comma, it must be quoted.

Encoded
String

Default Value: ""

The certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

EncodedB
byte[]

Default Value: ""

The certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

Constructors

public Certificate();

Creates a instance whose properties can be set. This is useful for use with when generating new certificates.

public Certificate( certificateFile);

Opens CertificateFile and reads out the contents as an X.509 public key.

public Certificate( encoded);

Parses Encoded as an X.509 public key.

public Certificate( storeType,  store,  storePassword,  subject);

StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store.

After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

public Certificate( storeType,  store,  storePassword,  subject,  configurationString);

StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store.

ConfigurationString is a newline-separated list of name-value pairs that may be used to modify the default behavior. Possible values include "PersistPFXKey", which shows whether or not the PFX key is persisted after performing operations with the private key. This correlates to the PKCS12_NO_PERSIST_KEY CryptoAPI option. The default value is True (the key is persisted). "Thumbprint" - an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load. When specified, this value is used to select the certificate in the store. This is applicable to the cstUser , cstMachine , cstPublicKeyFile , and cstPFXFile store types. "UseInternalSecurityAPI" shows whether the platform (default) or the internal security API is used when performing certificate-related operations.

After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

public Certificate( storeType,  store,  storePassword,  encoded);

StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store.

After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

public Certificate( storeType,  store,  storePassword,  subject);

StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a byte array containing the certificate data. StorePassword is the password used to protect the store.

After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

public Certificate( storeType,  store,  storePassword,  subject,  configurationString);

StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a byte array containing the certificate data. StorePassword is the password used to protect the store.

After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

public Certificate( storeType,  store,  storePassword,  encoded);

StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a byte array containing the certificate data. StorePassword is the password used to protect the store.

After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

Firewall Type

The firewall the class will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall, such as the firewall Host and the FirewallType.

The following fields are available:

Fields

AutoDetect
boolean

Default Value: False

Whether to automatically detect and use firewall system settings, if available.

Connection information will first be obtained from Java system properties, such as http.proxyHost and https.proxyHost. Java properties may be set in a variety of ways; please consult the Java documentation for information about how firewall and proxy values can be specified.

If no Java system properties define connection information, the class will inspect the Windows registry for connection information that may be present on the system (applicable only on Windows systems).

FirewallType
int

Default Value: 0

The type of firewall to connect through. The applicable values are as follows:

fwNone (0)No firewall (default setting).
fwTunnel (1)Connect through a tunneling proxy. Port is set to 80.
fwSOCKS4 (2)Connect through a SOCKS4 Proxy. Port is set to 1080.
fwSOCKS5 (3)Connect through a SOCKS5 Proxy. Port is set to 1080.
fwSOCKS4A (10)Connect through a SOCKS4A Proxy. Port is set to 1080.

Host
String

Default Value: ""

The name or IP address of the firewall (optional). If a Host is given, the requested connections will be authenticated through the specified firewall when connecting.

If this field is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this field is set to the corresponding address. If the search is not successful, the class throws an exception.

Password
String

Default Value: ""

A password if authentication is to be used when connecting through the firewall. If Host is specified, the User and Password fields are used to connect and authenticate to the given firewall. If the authentication fails, the class throws an exception.

Port
int

Default Value: 0

The Transmission Control Protocol (TCP) port for the firewall Host. See the description of the Host field for details.

Note: This field is set automatically when FirewallType is set to a valid value. See the description of the FirewallType field for details.

User
String

Default Value: ""

A username if authentication is to be used when connecting through a firewall. If Host is specified, this field and the Password field are used to connect and authenticate to the given Firewall. If the authentication fails, the class throws an exception.

Constructors

public Firewall();

GoogleLabel Type

A Google resource label.

Remarks

This type represents a Google resource label.

The following fields are available:

Fields

Name
String

Default Value: ""

The name of the label.

This field specifies the name of the label.

Value
String

Default Value: ""

The value of the label.

This field specifies the value of the label.

Constructors

public GoogleLabel();
public GoogleLabel( name,  value);

GoogleSecret Type

A Google secret or secret version.

Remarks

This type represents a Google secret or secret version.

The following fields are available:

Fields

CreationDate
String (read-only)

Default Value: ""

The secret's creation date.

This field reflects the creation date of the secret or secret version, formatted as an RFC 3339 UTC timestamp.

DestructionDate
String (read-only)

Default Value: ""

The secret version's destruction date.

This field reflects the destruction date of the secret version, formatted as an RFC 3339 UTC timestamp, or empty string if the secret version has not been destroyed.

Name
String (read-only)

Default Value: ""

The name of the secret.

This field reflects the name of the secret.

State
String (read-only)

Default Value: ""

The state of the secret version.

This field reflects the state of the secret version, possible values are:

  • ENABLED: The secret version is enabled and accessible.
  • DISABLED: The secret version is disabled, and cannot be accessed.
  • DESTROYED: The data held by the secret version has been permanently destroyed.

VersionId
String (read-only)

Default Value: ""

The Id of the secret version.

This field reflects the Id of the secret version.

Header Type

This is an HTTP header as it is received from the server.

Remarks

When a header is received through a Header event, it is parsed into a Header type. This type contains a Field, and its corresponding Value.

The following fields are available:

Fields

Field
String

Default Value: ""

This field contains the name of the HTTP Header (this is the same case as it is delivered).

Value
String

Default Value: ""

This field contains the Header contents.

Constructors

public Header();
public Header( field,  value);

OAuthSettings Type

The settings to use to authenticate with the service provider.

Remarks

Used to set give the class the necessary information needed to complete OAuth authentication.

The following fields are available:

Fields

AccessToken
String

Default Value: ""

The access token returned by the authorization server. This is set when the class makes a request to the token server.

AuthorizationCode
String

Default Value: ""

The authorization code that is exchanged for an access token. This is required to be set when the ClientProfile field is set to the Web profile. Otherwise, this field is for information purposes only.

AuthorizationScope
String

Default Value: ""

The scope request or response parameter used during authorization.

ClientId
String

Default Value: ""

The id of the client assigned when registering the application.

ClientProfile
int

Default Value: 0

The type of client that is requesting authorization. See the introduction section for more information. Possible values are:

0 (cocpApplication - Default)The application profile is applicable to applications that are run by the user directly. For instance a windows form application would use the application profile. To authorize your application (client) using the application profile see the introduction section.
1 (cocpWeb)The Web profile is applicable to applications that are run on the server side where the user uses the application from a web browser. To authorize your application (client) using this profile follow see the introduction section.

ClientSecret
String

Default Value: ""

The secret value for the client assigned when registering the application.

GrantType
int

Default Value: 0

The OAuth grant type used to acquire an OAuth access token. See the introduction section for more information. Possible values are:

0 (cogtAuthorizationCode - Default) Authorization Code grant type
1 (cogtImplicit) Implicit grant type
2 (cogtPassword) Resource Owner Password Credentials grant type
3 (cogtClientCredentials) Client Credentials grant type

RefreshToken
String

Default Value: ""

Specifies the refresh token received from or sent to the authorization server. This field is set automatically if a refresh token is retrieved from the token server. If the OAuthAutomaticRefresh configuration setting is set to true, and the GrantType field is set to a grant that can use refresh tokens.

RequestRefreshToken
boolean

Default Value: True

Specifies whether the class will request a refresh token during authorization. By default, this value is True.

When True, the class will automatically add the necessary scopes or parameters to obtain a refresh token. When False, this field will have no effect. If the necessary scopes or parameters are specified manually, a refresh token can still be obtained.

Note: This field is only applicable when the GrantType field is set to cogtAuthorizationCode.

ReturnURL
String

Default Value: ""

The URL where the user (browser) returns after authenticating. This field is mapped to the redirect_uri parameter when making a request to the authorization server. Typically, this is automatically set by the class when using the embedded web server. If the OAuthWebServerPort or OAuthWebServerHost configuration settings is set, then this field should be set to match. If using the Web client profile, this should be set to the place where the authorization code will be parsed out of the response after the user finishes authorizing.

ServerAuthURL
String

Default Value: ""

The URL of the authorization server.

ServerTokenURL
String

Default Value: ""

The URL of the token server used to obtain the access token.

WebAuthURL
String (read-only)

Default Value: ""

The URL to which the user should be re-directed for authorization. This field is used to get the URL that the user should be redirected to when using the Web client profile. See introduction section for more information.

Constructors

public OAuthSettings();

Proxy Type

The proxy the class will connect to.

Remarks

When connecting through a proxy, this type is used to specify different properties of the proxy, such as the Server and the AuthScheme.

The following fields are available:

Fields

AuthScheme
int

Default Value: 0

The type of authorization to perform when connecting to the proxy. This is used only when the User and Password fields are set.

AuthScheme should be set to authNone (3) when no authentication is expected.

By default, AuthScheme is authBasic (0), and if the User and Password fields are set, the class will attempt basic authentication.

If AuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If AuthScheme is set to authProprietary (2), then the authorization token will not be generated by the class. Look at the configuration file for the class being used to find more information about manually setting this token.

If AuthScheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this field will clear the values of User and Password.

AutoDetect
boolean

Default Value: False

Whether to automatically detect and use proxy system settings, if available. The default value is false.

Note: This setting is applicable only in Windows.

Password
String

Default Value: ""

A password if authentication is to be used for the proxy.

If AuthScheme is set to Basic Authentication, the User and Password fields are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If AuthScheme is set to Digest Authentication, the User and Password fields are used to respond to the Digest Authentication challenge from the server.

If AuthScheme is set to NTLM Authentication, the User and Password fields are used to authenticate through NTLM negotiation.

Port
int

Default Value: 80

The Transmission Control Protocol (TCP) port for the proxy Server (default 80). See the description of the Server field for details.

Server
String

Default Value: ""

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the Server field is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the Server field is set to the corresponding address. If the search is not successful, an error is returned.

SSL
int

Default Value: 0

When to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

psAutomatic (0)Default setting. If the URL is an https URL, the class will use the psTunnel option. If the URL is an http URL, the class will use the psNever option.
psAlways (1)The connection is always SSL-enabled.
psNever (2)The connection is not SSL-enabled.
psTunnel (3)The connection is made through a tunneling (HTTP) proxy.

User
String

Default Value: ""

A username if authentication is to be used for the proxy.

If AuthScheme is set to Basic Authentication, the User and Password fields are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If AuthScheme is set to Digest Authentication, the User and Password fields are used to respond to the Digest Authentication challenge from the server.

If AuthScheme is set to NTLM Authentication, the User and Password fields are used to authenticate through NTLM negotiation.

Constructors

public Proxy();
public Proxy( server,  port);
public Proxy( server,  port,  user,  password);

QueryParam Type

A query parameter to send in the request.

Remarks

This type represents a query parameter to send in the request.

The following fields are available:

Fields

Name
String

Default Value: ""

The name of the query parameter.

This field specifies the name of the query parameter.

Value
String

Default Value: ""

The value of the query parameter.

This field specifies the value of the query parameter. The class will automatically URL-encode this value when sending the request.

Constructors

public QueryParam();
public QueryParam( name,  value);

Config Settings (GoogleSecrets Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

GoogleSecrets Config Settings

AccumulatePages:   Whether the class should accumulate subsequent pages of results when listing them.

This setting controls how the class behaves when listing multiple pages of results. If this setting is enabled, each successive page of results will be appended to the appropriate collection property until the last page of results has been listed (at which point the next list call will cause said collection to be cleared first). If this setting is disabled, the collection will be cleared every time a page of results is returned.

By default, this setting is enabled, allowing all pages of results to be accumulated in the appropriate collection property.

CloseInputStreamAfterProcessing:   Whether the specified input stream should be closed after data is read from it.

This setting specifies whether the class should close the input stream supplied via the SetInputStream method after its data has been read and processed.

By default, this setting is disabled, and the input stream will remain open.

CloseOutputStreamAfterProcessing:   Whether the specified output stream should be closed after data is written to it.

This setting specifies whether the class should close the output stream supplied via the SetOutputStream method after data has been written to it.

By default, this setting is disabled, and the output stream will remain open.

CustomReplication:   A custom replication configuration to send when creating a new secret.

This setting can be set to a fully-formed replication JSON object before calling CreateSecret in order to specify the replication configuration of the new secret.

By default, this setting is empty, and the class creates secrets that use automatic replication with the default Google encryption scheme. Refer to the Google Secret Manager documentation for more information.

Note that this setting's value, if non-empty, is included in the request as-is without and validation; it must be a valid replication JSON object structured according to the Google Secret Manager documentation.

MaxSecrets:   The maximum number of results to return when listing secrets.

This setting specifies the maximum number of results that should be returned by a call to ListSecrets or ListVersions.

If this setting is -1 (default), the server chooses an appropriate default. Otherwise, the setting must be set to a value in the range 1 to 25000.

RawRequest:   Returns the data that was sent to the server.

This setting may be queried after calling any method that sends data to the server to obtain the request data that was transmitted. Such data may be useful for troubleshooting purposes.

RawResponse:   Returns the data that was received from the server.

This setting may be queried after calling any method that sends data to the server to obtain the response data that was received. Such data may be useful for troubleshooting purposes.

XChildCount:   The number of child elements of the current element.

This configuration settings specifies the number of child attributes of the current element. The XChild configuration settings will be indexed from 0 to (XChildCount - 1).

The current element is specified through the XPath configuration setting. This configuration setting is read-only.

XChildName[i]:   The name of the child element.

This configuration setting provides the name of the i-th child element of the current element.

The current element is specified through the XPath configuration setting. This configuration setting is read-only.

XChildXText[i]:   The inner text of the child element.

This configuration setting provides the inner text of the i-th child element of the current element.

The current element is specified through the XPath configuration setting. This configuration setting is read-only.

XElement:   The name of the current element.

This configuration setting provides the name of the current element.

The current element is specified through the XPath configuration setting. This configuration setting is read-only.

XParent:   The parent of the current element.

This configuration setting provides the parent of the current element.

The current element is specified through the XPath configuration setting. This configuration setting is read-only.

XPath:   Provides a way to point to a specific element in the returned XML or JSON response.

The XPath setting allows you to point to specific elements in the XML or JSON response.

When XPath is set to a valid path, XElement points to the name of the element, with XText, XParent, XSubTree, XChildCount, XChildName[i], and XChildXText[i] providing other properties of the element.

XPath syntax is available for both XML and JSON documents. An XPath is a series of one or more element accessors separated by the / character, for example, /A/B/C/D. An XPath can be absolute (i.e., it starts with /), or it can be relative to the current XPath location.

The following are possible values for an element accessor, which operates relative to the current location specified by the XPath accessors, which proceed it in the overall XPath string:

Accessor Description
name The first element with a particular name. Can be *.
[i] The i-th element.
name[i] The i-th element with a particular name.
[last()] The last element.
[last()-i] The element i before the last element.
name[@attrname="attrvalue"]The first element with a particular name that contains the specified attribute-value pair.

Supports single and double quotes. (XML Only)

. The current element.
.. The parent element.
Note: XPath indices are 1-based.

For example, assume the following XML and JSON responses.

XML:

<firstlevel>
  <one>value</one>
  <two>
    <item>first</item>
    <item>second</item>
  </two>
  <three>value three</three>
</firstlevel>

JSON:

{
  "firstlevel": {
    "one": "value",
    "two": ["first", "second"],
    "three": "value three"
  }
}

The following are examples of valid XPaths for these responses:

DescriptionXML XPath JSON XPath
Document root / /json
Specific element /firstlevel/one /json/firstlevel/one
i-th child /firstlevel/two/item[2]/json/firstlevel/two/[2]

This list is not exhaustive, but it provides a general idea of the possibilities.

XSubTree:   A snapshot of the current element in the document.

This configuration setting provides the entirety of the current element (including its subelements).

The current element is specified through the XPath configuration setting. This configuration setting is read-only.

XText:   The text of the current element.

This configuration setting provides the inner text of the current element.

The current element is specified in the XPath configuration setting. This configuration setting is read-only.

OAuth Config Settings

OAuthAccessTokenExpiration:   The lifetime of the access token.

This setting holds the lifetime of the access token in seconds. For instance the value 3600 indicates that the token will expire in one hour from the time it was generated.

OAuthAuthorizationTokenType:   The type of access token returned.

The applicable values include the following:

Bearer (default)When the access token returned by the server is a Bearer type, the authorization string returned by Authorize will be in the format "Bearer access_token". This can be supplied as the value of the HTTP Authorization header.
OAuthAutomaticRefresh:   Whether or not to refresh an expired access token automatically.

When this setting is set to true and the Authorization property is not set, the class will automatically get a new access token if it has the necessary properties to do so without user interaction.

For example, when using the Authorization Code grant type, the RefreshToken field should be set to a valid refresh token. When using the Client Credential grant type however, the class does not need any additional properties set as it can already get a new access token without user interaction.

OAuthBrowserResponseTimeout:   Specifies the amount of time to wait for a response from the browser.

This setting specifies the amount of time (in seconds) the class will wait for a response from the browser when requesting user authentication. The default value is 0, meaning that the class will wait indefinitely.

OAuthIncludeEmptyRedirectURI:   Whether an empty redirect_uri parameter is included in requests.

This setting specifies whether redirect_uri is included in the request made by Authorize if it is empty.

If set to true (default) the redirect_uri will be sent in all cases. If set to false the redirect_uri will only be sent if it has a value.

OAuthJWTPayload:   The payload of the JWT access token if present.

This configuration setting provides the payload section of a JWT access token if the access token is a JWT and the class is able to parse out the payload section. This setting only applies to access tokens that are returned from a service provider after successfully authorizing and authenticating with the service.

To parse the payload for specific claims, see OAuthJWTXPath.

OAuthJWTXChildCount:   The number of child elements of the current element.

The number of child attributes of the current element. The OAuthJWTXChildCount configuration settings will be indexed from 0 to (OAuthJWTXChildCount - 1).

The current element is specified in the OAuthJWTXPath configuration setting. This configuration setting is read-only.

OauthJWTXChildName[i]:   The name of the child element.

Provides the name of the i'th child element of the current element.

The current element is specified in the OAuthJWTXPath configuration setting. This configuration setting is read-only.

OAuthJWTXChildXText[i]:   The inner text of the child element.

Provides the inner text of the i'th child element of the current element.

The current element is specified in the OAuthJWTXPath configuration setting. This configuration setting is read-only.

OAuthJWTXElement:   The name of the current element.

Provides the name of the current element.

The current element is specified in the OAuthJWTXPath configuration setting. This configuration setting is read-only.

OauthJWTXParent:   The parent of the current element.

Provides the parent of the current element.

The current element is specified in the OAuthJWTXPath configuration setting. This configuration setting is read-only.

OAuthJWTXPath:   Provides a way to point to a specific element in the returned payload of a JWT based access token.

The OAuthJWTXPath setting allows you to point to specific claims within the payload of a JWT based access token.

XPath syntax is available for the payload of JWT based access tokens if available. An XPath is a series of one or more element accessors separated by the / character, for example: /A/B/C/D.

The following are possible values for an element accessor, which operates relative to the current location specified by the XPath accessors which proceed it in the overall XPath string:

Accessor Description
name The first element with a particular name. Can be *.
[i] The i-th element.
name[i] The i-th element with a particular name.
[last()] The last element.
[last()-i] The element i before the last element.
Here are some examples of valid XPaths and some common claims:
DescriptionJSON XPath
Document root /json
Specific element /json/element_one
Username Claim (Microsoft Specific) /json/preferred_username
Registered Application Name Claim (Microsoft Specific) /json/app_displayname

This is not an exhaustive list by any means, but should provide a general idea of the possibilities. To get the text of the specified element, see OAuthJWTXText.

OAuthJWTXSubTree:   A snapshot of the current element in the document.

Provides the entirety of the current element (including its sub-elements).

The current element is specified in the OAuthJWTXPath configuration setting. This configuration setting is read-only.

OAuthJWTXText:   The text of the current element.

Provides the inner text of the current element.

The current element is specified in the OAuthJWTXPath configuration setting. This configuration setting is read-only.

OAuthParamCount:   Specifies the number of additional parameters variables to include in the request.

This setting can be used to add query string parameters to the outgoing request. One common use for this method would be to add the "state" parameter to the request, which can be used when the ClientProfile is cocpWeb to add user defined data. The authorization server will include the "state" parameter in the response and will be available in the post back to your server which will allow you to maintain state in your application. This is used in conjunction with OAuthParamName[i] and OAuthParamValue[i]. For instance:

component.Config("OAuthParamCount=2"); component.Config("OAuthParamName[0]=myvar"); component.Config("OAuthParamValue[0]=myvalue"); component.Config("OAuthParamName[1]=testname"); component.Config("OAuthParamValue[1]=testvalue");

Additionally, this will also be updated to hold the parameters returned in the response.

for (int i = 0; i < int.Parse(component.Config("OAuthParamCount")); i++) { string name = component.Config("OAuthParamName[" + i + "]"); string value = component.Config("OAuthParamValue[" + i + "]"); }

OAuthParamName[i]:   Specifies the parameter name at the specified index.

This setting can be used to retrieve or specify the parameter variable name at the index specified. See OAuthParamCount for details.

OAuthParamValue[i]:   Specifies the parameter value at the specified index.

This setting can be used to retrieve or specify the parameter variable value at the index specified. See OAuthParamCount for details.

OAuthPasswordGrantUsername:   Used in the Resource Owner Password grant type.

Used to set the username field when the GrantType is set to the password grant type and Authorize is called.

OAuthPKCEChallengeEncoding:   The PKCE code challenge method to use.

This setting controls the PKCE code challenge method used when OAuthUsePKCE is set to true. Possible values are:

  • 1 (Plain)
  • 2 (S256/SHA256 - default)
OAuthPKCEVerifier:   The PKCE verifier used to generate the challenge.

This configuration setting when queried provides the PKCE verifier that is used to generate the PKCE challenge for the Authorize method and the WebAuthURL field when OAuthUsePKCE is set to true. When using the cocpWeb ClientProfile, the configuration setting can be set instead to allow the authorization request to be made from a different instance than the authentication (token) request.

OAuthResetData:   Determines if the Reset method applies to the OAuth settings.

If set to true (default), the Reset method will reset the OAuth settings including any authorization fields like AccessToken and RefreshToken. This means the Authorize method must be called again to get new authorization information. When set to false, the Reset method will not reset the OAuth property and the OAuth* configuration settings. This allows for the class to be reset without having to get authorization again.

OAuthReUseWebServer:   Determines if the same server instance is used between requests.

If set to true (default), the same embedded web server instance will be used for multiple requests. If set to false the embedded web server will be created and destroyed on each call to Authorize

OAuthTransferredRequest:   The full OAuth request last sent by the client.

This configuration setting returns the full OAuth request last sent by the client. For performance reasons, the request is not normally saved. Set this configuration setting to ON before making a request to enable it. Following are examples of this request:

.NET Gmail gmail = new Gmail(); gmail.Config("OAuthTransferredRequest=on"); gmail.Authorize(); Console.WriteLine(gmail.Config("OAuthTransferredRequest")); C++ Gmail gmail; gmail.Config("OAuthTransferredRequest=on"); gmail.Authorize(); printf("%s\r\n", gmail.Config("OAuthTransferredRequest"));

OAuthUsePKCE:   Specifies if PKCE should be used.

If set to true (default), Proof Key for Code Exchange (PKCE) defined by RFC 7636 will be used when performing authorization. This setting applies when using the Authorization Code GrantType. The OAuthPKCEChallengeEncoding configuration setting can be used to control the code challenge method that will be used.

OAuthWebServerActive:   Specifies and controls whether the embedded web server is active.

The setting when queried will return the current state of the web server. If the webserver is active, it will return "true" and if it is inactive it will return "false".

This setting can also be set to activate or deactivate the web server. Under normal circumstances, this would not be required as the class will automatically start and stop the web server when Authorize is called. In certain cases, it is required to start the webserver before calling Authorize. For example, if the ReturnURL needs to be set to a relay server, then you will need to start the web server manually. Another example would be when the OAuthReUseWebServer is set to true, the server will not be automatically stopped, and this configuration setting must be set to "false" to stop the embedded web server.

OAuthWebServerCertStore:   The certificate with private key to use when SSL is enabled.

The name of the certificate store used for the embedded web server's SSL.

The OAuthWebServerCertStoreType field specifies the type of the certificate store specified by OAuthWebServerCertStore. If the store is password protected, specify the password in OAuthWebServerCertStorePassword.

OAuthWebServerCertStore is used in conjunction with the OAuthWebServerCertSubject field in order to specify the certificate to be used during SSL.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Note: This is required when OAuthWebServerSSLEnabled is set to true.

OAuthWebServerCertStorePassword:   The certificate with private key to use when SSL is enabled.

If the certificate store is of a type that requires a password, this property is used to specify that password in order to open the certificate store.

Note: This is only applicable when OAuthWebServerSSLEnabled is set to true.

OAuthWebServerCertStoreType:   The certificate with private key to use when SSL is enabled.

This specifies the type of certificate store. Possible values are:

0 User - This is the default for Windows. This specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 Machine - For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 PFXFile - The certificate store is the name of a PFX (PKCS12) file containing certificates.
3 PFXBlob - The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS12) format.
4 JKSFile - The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is available only in Java.
5 JKSBlob - The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: This store type is available only in Java.
6 PEMKeyFile - The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 PEMKeyBlob - The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
14 PPKFile - The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 PPKBlob - The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 XMLFile - The certificate store is the name of a file that contains a certificate in XML format.
17 XMLBlob - The certificate store is a string that contains a certificate in XML format.
Note: This is required when OAuthWebServerSSLEnabled is set to true.
OAuthWebServerCertSubject:   The certificate with private key to use when SSL is enabled.

The subject of the SSL certificate.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

FieldMeaning
CNCommon Name. This is commonly a hostname like www.server.com.
OOrganization
OUOrganizational Unit
LLocality
SState
CCountry
EEmail Address

If a field value contains a comma, it must be quoted.

Note: This is required when OAuthWebServerSSLEnabled is set to true.

OAuthWebServerFailedResponse:   The custom response that will be displayed to the user if authentication failed.

When Authorize is called the user will be redirected to the embedded web server upon completing authentication with the authorization server. If authentication failed, the HTML specified here will be sent to the user's browser.

OAuthWebServerHost:   The hostname used by the embedded web server displayed in the ReturnURL.

This setting specifies the hostname used by the embedded web server when ClientProfile is set to cocpApplication. This specifies the interface on which the embedded web server listens, and also the value displayed in the ReturnURL. This should be set to the hostname only, not the full URL.

The default value is localhost.

OAuthWebServerPort:   The local port on which the embedded web server listens.

This property specifies the port on which the embedded web server listens. Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be returned when this setting is queried after the server has started listening.This is only applicable when using the embedded web server.

OAuthWebServerResponse:   The custom response that will be displayed to the user.

When Authorize is called the user will be redirected to the embedded web server upon completing authentication with the authorization server. This setting allows you to specify the HTML that will be sent to the user's browser.

OAuthWebServerSSLEnabled:   Whether the web server requires SSL connections.

This setting specifies whether the embedded web server will use SSL. If set to True OAuthWebServerCert* configs are required and the server will only accept SSL connections. If set to False only plaintext connects are supported.

HTTP Config Settings

AcceptEncoding:   Used to tell the server which types of content encodings the client supports.

When AllowHTTPCompression is True, the class adds an Accept-Encoding header to the request being sent to the server. By default, this header's value is "gzip, deflate". This configuration setting allows you to change the value of the Accept-Encoding header. Note: The class only supports gzip and deflate decompression algorithms.

AllowHTTPCompression:   This property enables HTTP compression for receiving data.

This configuration setting enables HTTP compression for receiving data. When set to True (default), the class will accept compressed data. It then will uncompress the data it has received. The class will handle data compressed by both gzip and deflate compression algorithms.

When True, the class adds an Accept-Encoding header to the outgoing request. The value for this header can be controlled by the AcceptEncoding configuration setting. The default value for this header is "gzip, deflate".

The default value is True.

AllowHTTPFallback:   Whether HTTP/2 connections are permitted to fallback to HTTP/1.1.

This configuration setting controls whether HTTP/2 connections are permitted to fall back to HTTP/1.1 when the server does not support HTTP/2. This setting is applicable only when HTTPVersion is set to "2.0".

If set to True (default), the class will automatically use HTTP/1.1 if the server does not support HTTP/2. If set to False, the class throws an exception if the server does not support HTTP/2.

The default value is True.

AllowNTLMFallback:   Whether to allow fallback from Negotiate to NTLM when authenticating.

This configuration setting applies only when AuthScheme is set to Negotiate. If set to True, the class will automatically use New Technology LAN Manager (NTLM) if the server does not support Negotiate authentication. Note: The server must indicate that it supports NTLM authentication through the WWW-Authenticate header for the fallback from Negotiate to NTLM to take place. The default value is False.

Append:   Whether to append data to LocalFile.

This configuration setting determines whether data will be appended when writing to LocalFile. When set to True, downloaded data will be appended to LocalFile. This may be used in conjunction with Range to resume a failed download. This is applicable only when LocalFile is set. The default value is False.

Authorization:   The Authorization string to be sent to the server.

If the Authorization property contains a nonempty string, an Authorization HTTP request header is added to the request. This header conveys Authorization information to the server.

This property is provided so that the HTTP class can be extended with other security schemes in addition to the authorization schemes already implemented by the class.

The AuthScheme property defines the authentication scheme used. In the case of HTTP Basic Authentication (default), every time User and Password are set, they are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]".

BytesTransferred:   Contains the number of bytes transferred in the response data.

This configuration setting returns the raw number of bytes from the HTTP response data, before the component processes the data, whether it is chunked or compressed. This returns the same value as the Transfer event, by BytesTransferred.

ChunkSize:   Specifies the chunk size in bytes when using chunked encoding.

This is applicable only when UseChunkedEncoding is True. This setting specifies the chunk size in bytes to be used when posting data. The default value is 16384.

CompressHTTPRequest:   Set to true to compress the body of a PUT or POST request.

If set to True, the body of a PUT or POST request will be compressed into gzip format before sending the request. The "Content-Encoding" header is also added to the outgoing request.

The default value is False.

EncodeURL:   If set to True the URL will be encoded by the class.

If set to True, the URL passed to the class will be URL encoded. The default value is False.

FollowRedirects:   Determines what happens when the server issues a redirect.

This option determines what happens when the server issues a redirect. Normally, the class returns an error if the server responds with an "Object Moved" message. If this property is set to 1 (always), the new URL for the object is retrieved automatically every time.

If this property is set to 2 (Same Scheme), the new URL is retrieved automatically only if the URL Scheme is the same; otherwise, the class throws an exception.

Note: Following the HTTP specification, unless this option is set to 1 (Always), automatic redirects will be performed only for GET or HEAD requests. Other methods potentially could change the conditions of the initial request and create security vulnerabilities.

Furthermore, if either the new URL server or port are different from the existing one, User and Password are also reset to empty, unless this property is set to 1 (Always), in which case the same credentials are used to connect to the new server.

A Redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the Redirect event is a good place to set properties related to the new connection (e.g., new authentication parameters).

The default value is 0 (Never). In this case, redirects are never followed, and the class throws an exception instead.

Following are the valid options:

  • 0 - Never
  • 1 - Always
  • 2 - Same Scheme

GetOn302Redirect:   If set to True the class will perform a GET on the new location.

The default value is False. If set to True, the class will perform a GET on the new location. Otherwise, it will use the same HTTP method again.

HTTP2HeadersWithoutIndexing:   HTTP2 headers that should not update the dynamic header table with incremental indexing.

HTTP/2 servers maintain a dynamic table of headers and values seen over the course of a connection. Typically, these headers are inserted into the table through incremental indexing (also known as HPACK, defined in RFC 7541). To tell the component not to use incremental indexing for certain headers, and thus not update the dynamic table, set this configuration option to a comma-delimited list of the header names.

HTTPVersion:   The version of HTTP used by the class.

This property specifies the HTTP version used by the class. Possible values are as follows:

  • "1.0"
  • "1.1" (default)
  • "2.0"
  • "3.0"

When using HTTP/2 ("2.0"), additional restrictions apply. Please see the following notes for details.

HTTP/2 Notes

When using HTTP/2, a secure Secure Sockets Layer/Transport Layer Security (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/2 will result in an error.

If the server does not support HTTP/2, the class will automatically use HTTP/1.1 instead. This is done to provide compatibility without the need for any additional settings. To see which version was used, check NegotiatedHTTPVersion after calling a method. The AllowHTTPFallback setting controls whether this behavior is allowed (default) or disallowed.

HTTP/2 is supported on all platforms. The class will use the internal security implementation in all cases when connecting.

HTTP/3 Notes

HTTP/3 is supported only in .NET and Java.

When using HTTP/3, a secure (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/3 will result in an error.

IfModifiedSince:   A date determining the maximum age of the desired document.

If this setting contains a nonempty string, an If-Modified-Since HTTP header is added to the request. The value of this header is used to make the HTTP request conditional: if the requested documented has not been modified since the time specified in the field, a copy of the document will not be returned from the server; instead, a 304 (not modified) response will be returned by the server and the component throws an exception

The format of the date value for IfModifiedSince is detailed in the HTTP specs. For example: Sat, 29 Oct 2017 19:43:31 GMT.

KeepAlive:   Determines whether the HTTP connection is closed after completion of the request.

If true, the component will not send the Connection: Close header. The absence of the Connection header indicates to the server that HTTP persistent connections should be used if supported. Note: Not all servers support persistent connections. If false, the connection will be closed immediately after the server response is received.

The default value for KeepAlive is false.

KerberosSPN:   The Service Principal Name for the Kerberos Domain Controller.

If the Service Principal Name on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, the Service Principal Name should be set here.

LogLevel:   The level of detail that is logged.

This configuration setting controls the level of detail that is logged through the Log event. Possible values are as follows:

0 (None) No events are logged.
1 (Info - default) Informational events are logged.
2 (Verbose) Detailed data are logged.
3 (Debug) Debug data are logged.

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

MaxHeaders:   Instructs class to save the amount of headers specified that are returned by the server after a Header event has been fired.

This configuration setting should be set when the TransferredHeaders collection is to be populated when a Header event has been fired. This value represents the number of headers that are to be saved in the collection.

To save all items to the collection, set this configuration setting to -1. If no items are wanted, set this to 0, which will not save any items to the collection. The default for this configuration setting is -1, so all items will be included in the collection.

MaxHTTPCookies:   Instructs class to save the amount of cookies specified that are returned by the server when a SetCookie event is fired.

This configuration setting should be set when populating the Cookies collection as a result of an HTTP request. This value represents the number of cookies that are to be saved in the collection.

To save all items to the collection, set this configuration setting to -1. If no items are wanted, set this to 0, which will not save any items to the collection. The default for this configuration setting is -1, so all items will be included in the collection.

MaxRedirectAttempts:   Limits the number of redirects that are followed in a request.

When FollowRedirects is set to any value other than frNever, the class will follow redirects until this maximum number of redirect attempts are made. The default value is 20.

NegotiatedHTTPVersion:   The negotiated HTTP version.

This configuration setting may be queried after the request is complete to indicate the HTTP version used. When HTTPVersion is set to "2.0" (if the server does not support "2.0"), then the class will fall back to using "1.1" automatically. This setting will indicate which version was used.

OtherHeaders:   Other headers as determined by the user (optional).

This configuration setting can be set to a string of headers to be appended to the HTTP request headers.

The headers must follow the format "header: value" as described in the HTTP specifications. Header lines should be separated by CRLF ("\r\n") .

Use this configuration setting with caution. If this configuration setting contains invalid headers, HTTP requests may fail.

This configuration setting is useful for extending the functionality of the class beyond what is provided.

ProxyAuthorization:   The authorization string to be sent to the proxy server.

This is similar to the Authorization configuration setting, but is used for proxy authorization. If this configuration setting contains a nonempty string, a Proxy-Authorization HTTP request header is added to the request. This header conveys proxy Authorization information to the server. If User and Password are specified, this value is calculated using the algorithm specified by AuthScheme.

ProxyAuthScheme:   The authorization scheme to be used for the proxy.

This configuration setting is provided for use by classs that do not directly expose Proxy properties.

ProxyPassword:   A password if authentication is to be used for the proxy.

This configuration setting is provided for use by classs that do not directly expose Proxy properties.

ProxyPort:   Port for the proxy server (default 80).

This configuration setting is provided for use by classs that do not directly expose Proxy properties.

ProxyServer:   Name or IP address of a proxy server (optional).

This configuration setting is provided for use by classs that do not directly expose Proxy properties.

ProxyUser:   A user name if authentication is to be used for the proxy.

This configuration setting is provided for use by classs that do not directly expose Proxy properties.

SentHeaders:   The full set of headers as sent by the client.

This configuration setting returns the complete set of raw headers as sent by the client.

StatusCode:   The status code of the last response from the server.

This configuration setting contains the result code of the last response from the server.

StatusLine:   The first line of the last response from the server.

This setting contains the first line of the last response from the server. The format of the line will be [HTTP version] [Result Code] [Description].

TransferredData:   The contents of the last response from the server.

This configuration setting contains the contents of the last response from the server.

TransferredDataLimit:   The maximum number of incoming bytes to be stored by the class.

If TransferredDataLimit is set to 0 (default), no limits are imposed. Otherwise, this reflects the maximum number of incoming bytes that can be stored by the class.

TransferredHeaders:   The full set of headers as received from the server.

This configuration setting returns the complete set of raw headers as received from the server.

TransferredRequest:   The full request as sent by the client.

This configuration setting returns the full request as sent by the client. For performance reasons, the request is not normally saved. Set this configuration setting to ON before making a request to enable it. Following are examples of this request:

.NET Http http = new Http(); http.Config("TransferredRequest=on"); http.PostData = "body"; http.Post("http://someserver.com"); Console.WriteLine(http.Config("TransferredRequest")); C++ HTTP http; http.Config("TransferredRequest=on"); http.SetPostData("body", 5); http.Post("http://someserver.com"); printf("%s\r\n", http.Config("TransferredRequest"));

UseChunkedEncoding:   Enables or Disables HTTP chunked encoding for transfers.

If UseChunkedEncoding is set to True, the class will use HTTP-chunked encoding when posting, if possible. HTTP-chunked encoding allows large files to be sent in chunks instead of all at once. If set to False, the class will not use HTTP-chunked encoding. The default value is False.

Note: Some servers (such as the ASP.NET Development Server) may not support chunked encoding.

UseIDNs:   Whether to encode hostnames to internationalized domain names.

This configuration setting specifies whether hostnames containing non-ASCII characters are encoded to internationalized domain names. When set to True, if a hostname contains non-ASCII characters, it is encoded using Punycode to an IDN (internationalized domain name).

The default value is False and the hostname will always be used exactly as specified.

UsePlatformDeflate:   Whether to use the platform implementation to decompress compressed responses.

This configuration setting specifies whether the platform's deflate-algorithm implementation is used to decompress responses that use compression. If set to True (default), the platform implementation is used. If set to False, an internal implementation is used.

UsePlatformHTTPClient:   Whether or not to use the platform HTTP client.

When using this configuration setting, if True, the component will use the default HTTP client for the platform (URLConnection in Java, WebRequest in .NET, or CFHTTPMessage in Mac/iOS) instead of the internal HTTP implementation. This is important for environments in which direct access to sockets is limited or not allowed (e.g., in the Google AppEngine).

UseProxyAutoConfigURL:   Whether to use a Proxy auto-config file when attempting a connection.

This configuration specifies whether the class will attempt to use the Proxy auto-config URL when establishing a connection and AutoDetect is set to True.

When True (default), the class will check for the existence of a Proxy auto-config URL, and if found, will determine the appropriate proxy to use.

UserAgent:   Information about the user agent (browser).

This is the value supplied in the HTTP User-Agent header. The default setting is "IPWorks HTTP Component - www.nsoftware.com".

Override the default with the name and version of your software.

TCPClient Config Settings

CloseStreamAfterTransfer:   If true, the component will close the upload or download stream after the transfer.

This configuration setting determines whether the input or output stream is closed after the transfer completes. When set to True (default), all streams will be closed after a transfer is completed. To keep streams open after the transfer of data, set this to False. The default value is True.

ConnectionTimeout:   Sets a separate timeout value for establishing a connection.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the class will use Timeout for establishing a connection and transmitting/receiving data.

FirewallAutoDetect:   Tells the class whether or not to automatically detect and use firewall system settings, if available.

This configuration setting is provided for use by classs that do not directly expose Firewall properties.

FirewallHost:   Name or IP address of firewall (optional).

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallListener:   If true, the component binds to a SOCKS firewall as a server (TCPClient only).

This entry is for TCPClient only and does not work for other components that descend from TCPClient.

If this entry is set, the class acts as a server. RemoteHost and RemotePort are used to tell the SOCKS firewall in which address and port to listen to. The firewall rules may ignore RemoteHost, and it is recommended that RemoteHost be set to empty string in this case.

RemotePort is the port in which the firewall will listen to. If set to 0, the firewall will select a random port. The binding (address and port) is provided through the ConnectionStatus event.

The connection to the firewall is made by calling the Connect method.

FirewallPassword:   Password to be used if authentication is to be used when connecting through the firewall.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the class throws an exception.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallPort:   The TCP port for the FirewallHost;.

The FirewallPort is set automatically when FirewallType is set to a valid value.

Note: This configuration setting is provided for use by classs that do not directly expose Firewall properties.

FirewallType:   Determines the type of firewall to connect through.

Possible values are as follows:

0No firewall (default setting).
1Connect through a tunneling proxy. FirewallPort is set to 80.
2Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
3Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
10Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallUser:   A user name if authentication is to be used connecting through a firewall.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the class throws an exception.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

KeepAliveInterval:   The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

When set, TCPKeepAlive will automatically be set to True. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in macOS.

KeepAliveTime:   The inactivity time in milliseconds before a TCP keep-alive packet is sent.

When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Linger:   When set to True, connections are terminated gracefully.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.

In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the class returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.

LingerTime:   Time in seconds to have the connection linger.

LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout.

LocalHost:   The name of the local host through which connections are initiated or accepted.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface), setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

LocalPort:   The port in the local host where the class binds.

This configuration setting must be set before a connection is attempted. It instructs the class to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This configuration setting is useful when trying to connect to services that require a trusted port on the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength:   The maximum amount of data to accumulate when no EOL is found.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.

MaxTransferRate:   The transfer rate limit in bytes per second.

This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit.

ProxyExceptionsList:   A semicolon separated list of hosts and IPs to bypass when using a proxy.

This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use. When requests are made to hosts specified in this property, the proxy will not be used. For instance:

www.google.com;www.nsoftware.com

TCPKeepAlive:   Determines whether or not the keep alive socket option is enabled.

If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

TcpNoDelay:   Whether or not to delay when sending packets.

When set to True, the socket will send all data that are ready to send at once. When set to False, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this configuration setting is set to False.

UseIPv6:   Whether to use IPv6.

When set to 0 (default), the class will use IPv4 exclusively. When set to 1, the class will use IPv6 exclusively. To instruct the class to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are as follows:

0 IPv4 only
1 IPv6 only
2 IPv6 with IPv4 fallback
UseNTLMv2:   Whether to use NTLM V2.

When authenticating with NTLM, this setting specifies whether NTLM V2 is used. By default this value is False and NTLM V1 will be used. Set this to True to use NTLM V2.

SSL Config Settings

LogSSLPackets:   Controls whether SSL packets are logged when using the internal security API.

When SSLProvider is set to Internal, this configuration setting controls whether Secure Sockets Layer (SSL) packets should be logged. By default, this configuration setting is False, as it is useful only for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this configuration setting has no effect if SSLProvider is set to Platform.

ReuseSSLSession:   Determines if the SSL session is reused.

If set to True, the class will reuse the context if and only if the following criteria are met:

  • The target host name is the same.
  • The system cache entry has not expired (default timeout is 10 hours).
  • The application process that calls the function is the same.
  • The logon session is the same.
  • The instance of the class is the same.

SSLCACerts:   A newline separated list of CA certificates to be included when performing an SSL handshake.

When SSLProvider is set to Internal, this configuration setting specifies one or more CA certificates to be included with the SSLCert property. Some servers or clients require the entire chain, including CA certificates, to be presented when performing SSL authentication. The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLCheckCRL:   Whether to check the Certificate Revocation List for the server certificate.

This configuration setting specifies whether the class will check the Certificate Revocation List (CRL) specified by the server certificate. If set to 1 or 2, the class will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The class will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the class throws an exception.

When set to 0 (default), the CRL check will not be performed by the class. When set to 1, it will attempt to perform the CRL check, but it will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.

This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems.

SSLCheckOCSP:   Whether to use OCSP to check the status of the server certificate.

This configuration setting specifies whether the class will use OCSP to check the validity of the server certificate. If set to 1 or 2, the class will first obtain the Online Certificate Status Protocol (OCSP) URL from the server certificate's OCSP extension. The class will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation, the class throws an exception.

When set to 0 (default), the class will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but it will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.

This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems.

SSLCipherStrength:   The minimum cipher strength used for bulk encryption.

This minimum cipher strength is largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Note: This configuration setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this configuration setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList configuration setting.

SSLClientCACerts:   A newline separated list of CA certificates to use during SSL client certificate validation.

This configuration setting is only applicable to server components (e.g., TCPServer) see SSLServerCACerts for client components (e.g., TCPClient). This setting can be used to optionally specify one or more CA certificates to be used when verifying the client certificate that is presented by the client during the SSL handshake when SSLAuthenticateClients is enabled. When verifying the client's certificate, the certificates trusted by the system will be used as part of the verification process. If the client's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This configuration setting should be set only if the client's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLContextProtocol:   The protocol used when getting an SSLContext instance.

Possible values are SSL, SSLv2, SSLv3, TLS, and TLSv1. Use this configuration setting only in case your security provider does not support TLS. This is the parameter "protocol" inside the SSLContext.getInstance(protocol) call.

SSLEnabledCipherSuites:   The cipher suite to be used in an SSL negotiation.

This configuration setting enables the cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the class will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Note: This value must be set after SSLProvider is set.

Example values: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=SSL_RSA_WITH_RC4_128_SHA"); obj.config("SSLEnabledCipherSuites=SSL_RSA_WITH_RC4_128_SHA; SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA"); Possible values when SSLProvider is set to Platform include the following:

  • SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA
  • SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA
  • SSL_RSA_WITH_RC4_128_SHA
  • SSL_RSA_WITH_DES_CBC_SHA
  • SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
  • SSL_DH_anon_WITH_DES_CBC_SHA
  • SSL_RSA_EXPORT_WITH_RC4_40_MD5
  • SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA
  • SSL_DH_anon_EXPORT_WITH_RC4_40_MD5
  • SSL_DHE_DSS_WITH_DES_CBC_SHA
  • SSL_RSA_WITH_NULL_MD5
  • SSL_DH_anon_WITH_3DES_EDE_CBC_SHA
  • SSL_DHE_RSA_WITH_DES_CBC_SHA
  • SSL_DH_anon_EXPORT_WITH_DES40_CBC_SHA
  • SSL_RSA_WITH_NULL_SHA
  • SSL_DH_anon_WITH_RC4_128_MD5
  • SSL_RSA_WITH_RC4_128_MD5
  • SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA
  • SSL_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_NULL_SHA
  • TLS_DH_anon_WITH_AES_128_CBC_SHA256 (Not Recommended)
  • TLS_ECDH_anon_WITH_RC4_128_SHA
  • TLS_DH_anon_WITH_AES_128_CBC_SHA (Not Recommended)
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_KRB5_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_KRB5_EXPORT_WITH_RC4_40_SHA
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_RC4_128_SHA
  • TLS_ECDH_ECDSA_WITH_RC4_128_SHA
  • TLS_ECDH_anon_WITH_NULL_SHA
  • TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_RSA_WITH_NULL_SHA256
  • TLS_ECDH_anon_WITH_3DES_EDE_CBC_SHA
  • TLS_KRB5_WITH_RC4_128_MD5
  • TLS_ECDHE_ECDSA_WITH_NULL_SHA
  • TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_RSA_WITH_RC4_128_SHA
  • TLS_EMPTY_RENEGOTIATION_INFO_SCSV
  • TLS_KRB5_WITH_3DES_EDE_CBC_MD5
  • TLS_KRB5_WITH_RC4_128_SHA
  • TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_RSA_WITH_NULL_SHA
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
  • TLS_KRB5_WITH_DES_CBC_MD5
  • TLS_KRB5_EXPORT_WITH_RC4_40_MD5
  • TLS_KRB5_EXPORT_WITH_DES_CBC_40_MD5
  • TLS_ECDH_anon_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_KRB5_WITH_DES_CBC_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA
  • TLS_KRB5_EXPORT_WITH_DES_CBC_40_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_NULL_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA

Possible values when SSLProvider is set to Internal include the following:

  • TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
  • TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
  • TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_DES_CBC_SHA
  • TLS_DHE_RSA_WITH_DES_CBC_SHA
  • TLS_DHE_DSS_WITH_DES_CBC_SHA
  • TLS_RSA_WITH_RC4_128_MD5
  • TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols), only the following cipher suites are supported:

  • TLS_AES_256_GCM_SHA384
  • TLS_CHACHA20_POLY1305_SHA256
  • TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols:   Used to enable/disable the supported security protocols.

This configuration setting is used to enable or disable the supported security protocols.

Not all supported protocols are enabled by default. The default value is 4032 for client components, and 3072 for server components. To specify a combination of enabled protocol versions set this config to the binary OR of one or more of the following values:

TLS1.312288 (Hex 3000)
TLS1.23072 (Hex C00) (Default - Client and Server)
TLS1.1768 (Hex 300) (Default - Client)
TLS1 192 (Hex C0) (Default - Client)
SSL3 48 (Hex 30)
SSL2 12 (Hex 0C)

Note that only TLS 1.2 is enabled for server components that accept incoming connections. This adheres to industry standards to ensure a secure connection. Client components enable TLS 1.0, TLS 1.1, and TLS 1.2 by default and will negotiate the highest mutually supported version when connecting to a server, which should be TLS 1.2 in most cases.

SSLEnabledProtocols: Transport Layer Security (TLS) 1.3 Notes:

By default when TLS 1.3 is enabled, the class will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions.

In editions that are designed to run on Windows, SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is supported only on Windows 11/Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.

If set to 1 (Platform provider), please be aware of the following notes:

  • The platform provider is available only on Windows 11/Windows Server 2022 and up.
  • SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
  • If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2, these restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.

SSLEnabledProtocols: SSL2 and SSL3 Notes:

SSL 2.0 and 3.0 are not supported by the class when the SSLProvider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and SSLProvider needs to be set to platform.

SSLEnableRenegotiation:   Whether the renegotiation_info SSL extension is supported.

This configuration setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This configuration setting is false by default, but it can be set to true to enable the extension.

This configuration setting is applicable only when SSLProvider is set to Internal.

SSLIncludeCertChain:   Whether the entire certificate chain is included in the SSLServerAuthentication event.

This configuration setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True, all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

Note: When SSLProvider is set to Internal this value is automatically set to true. This is needed for proper validation when using the internal provider.

SSLKeyLogFile:   The location of a file where per-session secrets are written for debugging purposes.

This configuration setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the class will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools, such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffic for debugging purposes. When writing to this file, the class will only append, it will not overwrite previous values.

Note: This configuration setting is applicable only when SSLProvider is set to Internal.

SSLNegotiatedCipher:   Returns the negotiated cipher suite.

This configuration setting returns the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

SSLNegotiatedCipherStrength:   Returns the negotiated cipher suite strength.

This configuration setting returns the strength of the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

SSLNegotiatedCipherSuite:   Returns the negotiated cipher suite.

This configuration setting returns the cipher suite negotiated during the SSL handshake represented as a single string.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherSuite[connId]");

SSLNegotiatedKeyExchange:   Returns the negotiated key exchange algorithm.

This configuration setting returns the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchange[connId]");

SSLNegotiatedKeyExchangeStrength:   Returns the negotiated key exchange algorithm strength.

This configuration setting returns the strength of the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchangeStrength[connId]");

SSLNegotiatedVersion:   Returns the negotiated protocol version.

This configuration setting returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

SSLServerCACerts:   A newline separated list of CA certificates to use during SSL server certificate validation.

This configuration setting is only used by client components (e.g., TCPClient) see SSLClientCACerts for server components (e.g., TCPServer). This configuration setting can be used to optionally specify one or more CA certificates to be used when connecting to the server and verifying the server certificate. When verifying the server's certificate, the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This configuration setting should be set only if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLTrustManagerFactoryAlgorithm:   The algorithm to be used to create a TrustManager through TrustManagerFactory.

Possible values include SunX509. This is the parameter "algorithm" inside the TrustManagerFactory.getInstance(algorithm) call.

TLS12SignatureAlgorithms:   Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.

This configuration setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the class will verify that the server certificate signature algorithm is among the values specified in this configuration setting. If the server certificate signature algorithm is unsupported, the class throws an exception.

The format of this value is a comma-separated list of hash-signature combinations. For instance: component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this configuration setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

To not restrict the server's certificate signature algorithm, specify an empty string as the value for this configuration setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups:   The supported groups for ECC.

This configuration setting specifies a comma-separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)

TLS13KeyShareGroups:   The groups for which to pregenerate key shares.

This configuration setting specifies a comma-separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional roundtrip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result, only some groups are included by default in this configuration setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used that is not present in this list, it will incur an additional roundtrip and time to generate the key share for that group.

In most cases, this configuration setting does not need to be modified. This should be modified only if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448"
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1"
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096"
  • "ffdhe_6144"
  • "ffdhe_8192"

TLS13SignatureAlgorithms:   The allowed certificate signature algorithms.

This configuration setting holds a comma-separated list of allowed signature algorithms. Possible values include the following:

  • "ed25519" (default)
  • "ed448" (default)
  • "ecdsa_secp256r1_sha256" (default)
  • "ecdsa_secp384r1_sha384" (default)
  • "ecdsa_secp521r1_sha512" (default)
  • "rsa_pkcs1_sha256" (default)
  • "rsa_pkcs1_sha384" (default)
  • "rsa_pkcs1_sha512" (default)
  • "rsa_pss_sha256" (default)
  • "rsa_pss_sha384" (default)
  • "rsa_pss_sha512" (default)
The default value is rsa_pss_sha256,rsa_pss_sha384,rsa_pss_sha512,rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512,ecdsa_secp256r1_sha256,ecdsa_secp384r1_sha384,ecdsa_secp521r1_sha512,ed25519,ed448. This configuration setting is applicable only when SSLEnabledProtocols includes TLS 1.3.
TLS13SupportedGroups:   The supported groups for (EC)DHE key exchange.

This configuration setting specifies a comma-separated list of named groups used in TLS 1.3 for key exchange. This configuration setting should be modified only if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448" (default)
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096" (default)
  • "ffdhe_6144" (default)
  • "ffdhe_8192" (default)

Socket Config Settings

AbsoluteTimeout:   Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method that does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for User Datagram Protocol (UDP) ports.

FirewallData:   Used to send extra data to the firewall.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g., headers for custom authentication schemes).

InBufferSize:   The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the Transmission Control Protocol (TCP)/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. In some cases, increasing the value of the InBufferSize setting can provide significant improvements in performance.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize:   The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. In some cases, increasing the value of the OutBufferSize setting can provide significant improvements in performance.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

Base Config Settings

BuildInfo:   Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

GUIAvailable:   Whether or not a message loop is available for processing events.

In a GUI-based application, long-running blocking operations may cause the application to stop responding to input until the operation returns. The class will attempt to discover whether or not the application has a message loop and, if one is discovered, it will process events in that message loop during any such blocking operation.

In some non-GUI applications, an invalid message loop may be discovered that will result in errant behavior. In these cases, setting GUIAvailable to false will ensure that the class does not attempt to process external events.

LicenseInfo:   Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a class is using. It will return the following information:

  • Product: The product the license is for.
  • Product Key: The key the license was generated from.
  • License Source: Where the license was found (e.g., RuntimeLicense, License File).
  • License Type: The type of license installed (e.g., Royalty Free, Single Server).
  • Last Valid Build: The last valid build number for which the license will work.
MaskSensitiveData:   Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.

This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseDaemonThreads:   Whether threads created by the class are daemon threads.

If set to True (default), when the class creates a thread, the thread's Daemon property will be explicitly set to True. When set to False, the class will not set the Daemon property on the created thread. The default value is True.

UseFIPSCompliantAPI:   Tells the class whether or not to use FIPS certified APIs.

When set to true, the class will utilize the underlying operating system's certified APIs. Java editions, regardless of OS, utilize Bouncy Castle Federal Information Processing Standards (FIPS), while all other Windows editions make use of Microsoft security libraries.

The Java edition requires installation of the FIPS-certified Bouncy Castle library regardless of the target operating system. This can be downloaded from https://www.bouncycastle.org/fips-java/. Only the "Provider" library is needed. The jar file should then be installed in a JRE search path.

The following classes must be imported in the application in which the component will be used:

import java.security.Security; import org.bouncycastle.jcajce.provider.BouncyCastleFipsProvider;

The Bouncy Castle provider must be added as a valid provider and must also be configured to operate in FIPS mode:

System.setProperty("org.bouncycastle.fips.approved_only","true"); Security.addProvider(new BouncyCastleFipsProvider());

When UseFIPSCompliantAPI is true, Secure Sockets Layer (SSL)-enabled classes can optionally be configured to use the Transport Layer Security (TLS) Bouncy Castle library. When SSLProvider is set to sslpAutomatic (default) or sslpInternal, an internal TLS implementation is used, but all cryptographic operations are offloaded to the Bouncy Castle FIPS provider to achieve FIPS-compliant operation. If SSLProvider is set to sslpPlatform, the Bouncy Castle JSSE will be used in place of the internal TLS implementation.

To enable the use of the Bouncy Castle JSSE take the following steps in addition to the steps above. Both the Bouncy Castle FIPS provider and the Bouncy Castle JSSE must be configured to use the Bouncy Castle TLS library in FIPS mode. Obtain the Bouncy Castle TLS library from https://www.bouncycastle.org/fips-java/. The jar file should then be installed in a JRE search path.

The following classes must be imported in the application in which the component will be used:

import java.security.Security; import org.bouncycastle.jcajce.provider.BouncyCastleFipsProvider; //required to use BCJSSE when SSLProvider is set to sslpPlatform import org.bouncycastle.jsse.provider.BouncyCastleJsseProvider;

The Bouncy Castle provider must be added as a valid provider and also must be configured to operate in FIPS mode:

System.setProperty("org.bouncycastle.fips.approved_only","true"); Security.addProvider(new BouncyCastleFipsProvider()); //required to use BCJSSE when SSLProvider is set to sslpPlatform Security.addProvider(new BouncyCastleJsseProvider("fips:BCFIPS")); //optional - configure logging level of BCJSSE Logger.getLogger("org.bouncycastle.jsse").setLevel(java.util.logging.Level.OFF); //configure the class to use BCJSSE component.setSSLProvider(1); //platform component.config("UseFIPSCompliantAPI=true"); Note: TLS 1.3 support requires the Bouncy Castle TLS library version 1.0.14 or later.

FIPS mode can be enabled by setting the UseFIPSCompliantAPI configuration setting to true. This is a static setting that applies to all instances of all classes of the toolkit within the process. It is recommended to enable or disable this setting once before the component has been used to establish a connection. Enabling FIPS while an instance of the component is active and connected may result in unexpected behavior.

For more details, please see the FIPS 140-2 Compliance article.

Note: Enabling FIPS compliance requires a special license; please contact sales@nsoftware.com for details.

UseInternalSecurityAPI:   Whether or not to use the system security libraries or an internal implementation.

When set to false, the class will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to true tells the class to use the internal implementation instead of using the system security libraries.

This setting is set to false by default on all platforms.

Trappable Errors (GoogleSecrets Class)

Common Errors

600   A server error occurred, and/or the class was unable to process the server's response. Please refer to the error message for more information.
601   An unsupported operation or action was attempted.
602   The RawRequest or RawResponse configuration setting was queried without first setting the TransferredRequest configuration setting to ON.
603   The login credentials specified were invalid. Please refer to the error message for more information.
604   An invalid remote resource identifier (i.e., a name, path, Id, etc.) was specified.
605   An invalid index was specified.
606   An operation failed because the specified OutputFile already exists and Overwrite is false.
607   An exception occurred while working with the specified InputFile or OutputFile (or the current value of one of those properties is invalid). Please refer to the error message for more information.
608   An exception occurred while working with the specified input or output stream. Please refer to the error message for more information.

HTTP Errors

118   Firewall error. The error description contains the detailed message.
143   Busy executing current method.
151   HTTP protocol error. The error message has the server response.
152   No server specified in URL.
153   Specified URLScheme is invalid.
155   Range operation is not supported by server.
156   Invalid cookie index (out of range).
301   Interrupted.
302   Cannot open AttachedFile.

TCPClient Errors

100   You cannot change the RemotePort at this time. A connection is in progress.
101   You cannot change the RemoteHost (Server) at this time. A connection is in progress.
102   The RemoteHost address is invalid (0.0.0.0).
104   Already connected. If you want to reconnect, close the current connection first.
106   You cannot change the LocalPort at this time. A connection is in progress.
107   You cannot change the LocalHost at this time. A connection is in progress.
112   You cannot change MaxLineLength at this time. A connection is in progress.
116   RemotePort cannot be zero. Please specify a valid service port number.
117   You cannot change the UseConnection option while the class is active.
135   Operation would block.
201   Timeout.
211   Action impossible in control's present state.
212   Action impossible while not connected.
213   Action impossible while listening.
301   Timeout.
303   Could not open file.
434   Unable to convert string to selected CodePage.
1105   Already connecting. If you want to reconnect, close the current connection first.
1117   You need to connect first.
1119   You cannot change the LocalHost at this time. A connection is in progress.
1120   Connection dropped by remote host.

SSL Errors

270   Cannot load specified security library.
271   Cannot open certificate store.
272   Cannot find specified certificate.
273   Cannot acquire security credentials.
274   Cannot find certificate chain.
275   Cannot verify certificate chain.
276   Error during handshake.
280   Error verifying certificate.
281   Could not find client certificate.
282   Could not find server certificate.
283   Error encrypting data.
284   Error decrypting data.

TCP/IP Errors

10004   [10004] Interrupted system call.
10009   [10009] Bad file number.
10013   [10013] Access denied.
10014   [10014] Bad address.
10022   [10022] Invalid argument.
10024   [10024] Too many open files.
10035   [10035] Operation would block.
10036   [10036] Operation now in progress.
10037   [10037] Operation already in progress.
10038   [10038] Socket operation on nonsocket.
10039   [10039] Destination address required.
10040   [10040] Message is too long.
10041   [10041] Protocol wrong type for socket.
10042   [10042] Bad protocol option.
10043   [10043] Protocol is not supported.
10044   [10044] Socket type is not supported.
10045   [10045] Operation is not supported on socket.
10046   [10046] Protocol family is not supported.
10047   [10047] Address family is not supported by protocol family.
10048   [10048] Address already in use.
10049   [10049] Cannot assign requested address.
10050   [10050] Network is down.
10051   [10051] Network is unreachable.
10052   [10052] Net dropped connection or reset.
10053   [10053] Software caused connection abort.
10054   [10054] Connection reset by peer.
10055   [10055] No buffer space available.
10056   [10056] Socket is already connected.
10057   [10057] Socket is not connected.
10058   [10058] Cannot send after socket shutdown.
10059   [10059] Too many references, cannot splice.
10060   [10060] Connection timed out.
10061   [10061] Connection refused.
10062   [10062] Too many levels of symbolic links.
10063   [10063] File name is too long.
10064   [10064] Host is down.
10065   [10065] No route to host.
10066   [10066] Directory is not empty
10067   [10067] Too many processes.
10068   [10068] Too many users.
10069   [10069] Disc Quota Exceeded.
10070   [10070] Stale NFS file handle.
10071   [10071] Too many levels of remote in path.
10091   [10091] Network subsystem is unavailable.
10092   [10092] WINSOCK DLL Version out of range.
10093   [10093] Winsock is not loaded yet.
11001   [11001] Host not found.
11002   [11002] Nonauthoritative 'Host not found' (try again or check DNS setup).
11003   [11003] Nonrecoverable errors: FORMERR, REFUSED, NOTIMP.
11004   [11004] Valid name, no data record (check DNS setup).