AmazonGlacier Class

Properties   Methods   Events   Config Settings   Errors  

The AmazonGlacier class provides a quick way to interface with Amazon's Glacier service.

Class Name

CloudStorage_AmazonGlacier

Procedural Interface

 cloudstorage_amazonglacier_open();
 cloudstorage_amazonglacier_close($res);
 cloudstorage_amazonglacier_register_callback($res, $id, $function);
 cloudstorage_amazonglacier_get_last_error($res);
 cloudstorage_amazonglacier_get_last_error_code($res);
 cloudstorage_amazonglacier_set($res, $id, $index, $value);
 cloudstorage_amazonglacier_get($res, $id, $index);
 cloudstorage_amazonglacier_do_abortmultipartupload($res, $vaultname, $uploadid);
 cloudstorage_amazonglacier_do_completemultipartupload($res, $vaultname, $uploadid);
 cloudstorage_amazonglacier_do_config($res, $configurationstring);
 cloudstorage_amazonglacier_do_createjob($res, $vaultname, $jobtype, $archiveid, $snstopic);
 cloudstorage_amazonglacier_do_createvault($res, $vaultname);
 cloudstorage_amazonglacier_do_deletearchive($res, $vaultname, $archiveid);
 cloudstorage_amazonglacier_do_deletenotificationinfo($res, $vaultname);
 cloudstorage_amazonglacier_do_deletevault($res, $vaultname);
 cloudstorage_amazonglacier_do_doevents($res);
 cloudstorage_amazonglacier_do_getjobinfo($res, $vaultname, $jobid);
 cloudstorage_amazonglacier_do_getjoboutput($res, $vaultname, $jobid);
 cloudstorage_amazonglacier_do_getnotificationinfo($res, $vaultname);
 cloudstorage_amazonglacier_do_getvaultinfo($res, $vaultname);
 cloudstorage_amazonglacier_do_interrupt($res);
 cloudstorage_amazonglacier_do_listjobs($res, $vaultname);
 cloudstorage_amazonglacier_do_listmultipartuploads($res, $vaultname);
 cloudstorage_amazonglacier_do_listparts($res, $vaultname, $uploadid);
 cloudstorage_amazonglacier_do_listvaults($res);
 cloudstorage_amazonglacier_do_reset($res);
 cloudstorage_amazonglacier_do_setnotificationinfo($res, $vaultname);
 cloudstorage_amazonglacier_do_startmultipartupload($res, $vaultname, $archivedesc);
 cloudstorage_amazonglacier_do_uploadarchive($res, $vaultname, $archivedesc);
 cloudstorage_amazonglacier_do_uploadpart($res, $vaultname, $uploadid, $partnumber);

Remarks

The AmazonGlacier class allows you to simply access Amazon's Glacier service. Glacier allows you to create vaults and store archives.

Before using the class you must first have an AWS account and sign up for the Glacier service. To use the class first set AccessKey and SecretKey.

To create a vault call CreateVault. Once the vault is created you are ready to upload archives to store in the vault. Set LocalFile to the file you want to upload and call UploadArchive.

To retrieve an archive you must create a job. Jobs are long running operations and Amazon will notify you when the job is complete. To create a job call CreateJob. Use the SetNotificationInfo method to set notification options at the vault level. You may also supply an Amazon SNS topic to CreateJob to which Amazon will publish notification about the job status.

You can also call CreateJob to create an Inventory Retrieval job to list the contents of a vault.

After the job is complete use GetJobOutput to retrieve the data.

Additionally, multipart uploads are supported through the StartMultipartUpload and CompleteMultipartUpload methods. Various other operations such as DeleteArchive, GetJobInfo, ListJobs, ListMultipartUploads, ListVaults, and more provide additional functionality.

Property List


The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

AccessKeyThe access key to use for authentication.
ArchiveDataHolds the archive data.
EncryptionAlgorithmThe encryption algorithm.
EncryptionPasswordThe encryption password.
FirewallAutoDetectThis property tells the class whether or not to automatically detect and use firewall system settings, if available.
FirewallTypeThis property determines the type of firewall to connect through.
FirewallHostThis property contains the name or IP address of firewall (optional).
FirewallPasswordThis property contains a password if authentication is to be used when connecting through the firewall.
FirewallPortThis property contains the transmission control protocol (TCP) port for the firewall Host .
FirewallUserThis property contains a user name if authentication is to be used connecting through a firewall.
IdleThe current status of the class.
InventoryDataHolds the inventory data.
JobMarkerA marker used to get the next page of results.
JobCountThe number of records in the Job arrays.
JobArchiveIdThis property is populated with the ArchiveId associated with the Job.
JobArchiveSHA256TreeHashThe SHA256 tree hash of the entire archive for an archive retrieval job.
JobArchiveSizeThe size of the archive in bytes.
JobCompletedIndicates the completion status of the job.
JobCompletionDateThe UTC time that the job completed.
JobCreationDateThe UTC time that the job was created.
JobDescriptionThe user supplied description.
JobInventorySizeThe size in bytes of the inventory data.
JobIdThe Amazon assigned JobId.
JobSHA256TreeHashThe SHA256 tree hash value for the requested range of an archive.
JobSNSTopicThe Amazon SNS topic that will receive notifications about the job status.
JobStatusCodeThe current status of the job.
JobStatusMessageA user friendly description of the status.
JobTypeThe type of the current job.
JobVaultArnThe Amazon Resource Name (ARN) of the vault from which the archive retrieval or inventory retrieval was requested.
LocalFileThe path to a local file for uploading or downloading.
LocalHostThe name of the local host or user-assigned IP interface through which connections are initiated or accepted.
MultipartUploadMarkerA marker used to get the next page of results.
MultipartUploadCountThe number of records in the MultipartUpload arrays.
MultipartUploadArchiveDescriptionThe description of the archive (if any).
MultipartUploadCreationDateThe UTC time that the multipart upload was started.
MultipartUploadPartSizeThe part size in bytes.
MultipartUploadIdThe Id of the multipart upload.
MultipartUploadVaultArnThe Amazon Resource Name (ARN) of the Vault in which the archive is created.
NotifyEventTypeThis property specifies the type of enabled notifications for the vault.
NotifySNSTopicThis property specifies the Amazon SNS Topic ARN that is used to deliver notifications.
OtherHeadersThis property includes other headers as determined by the user (optional).
OverwriteWhether or not the class should overwrite files during transfer.
ParsedHeaderCountThe number of records in the ParsedHeader arrays.
ParsedHeaderFieldThis property contains the name of the HTTP header (this is the same case as it is delivered).
ParsedHeaderValueThis property contains the header contents.
PartMarkerA marker used to get the next page of results.
PartCountThe number of records in the Part arrays.
PartArchiveDescriptionThe description of the archive (if any).
PartCreationDateThe UTC time that the multipart upload was started.
PartSHA256TreeHashThe SHA256 tree hash value that Amazon calculated for the part.
PartSizeThe part size in bytes.
PartStartPositionThe byte offset in the archive of the current part.
PartUploadIdThe Id of the multipart upload associated with this part.
PartVaultArnThe Amazon Resource Name (ARN) of the Vault in which the archive is created.
ProxyAuthSchemeThis property is used to tell the class which type of authorization to perform when connecting to the proxy.
ProxyAutoDetectThis property tells the class whether or not to automatically detect and use proxy system settings, if available.
ProxyPasswordThis property contains a password if authentication is to be used for the proxy.
ProxyPortThis property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).
ProxyServerIf a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.
ProxySSLThis property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.
ProxyUserThis property contains a user name, if authentication is to be used for the proxy.
RegionThe region the class will make requests against.
SecretKeyThe secret key to use for authentication.
SSLAcceptServerCertEncodedThis is the certificate (PEM/base64 encoded).
SSLCertEncodedThis is the certificate (PEM/base64 encoded).
SSLCertStoreThis is the name of the certificate store for the client certificate.
SSLCertStorePasswordIf the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
SSLCertStoreTypeThis is the type of certificate store for this certificate.
SSLCertSubjectThis is the subject of the certificate used for client authentication.
SSLProviderThis specifies the SSL/TLS implementation to use.
SSLServerCertEncodedThis is the certificate (PEM/base64 encoded).
TimeoutA timeout for the class.
UseSSLWhether to use SSL/TLS when connecting.
VaultMarkerA marker used to get the next page of results.
VaultCountThe number of records in the Vault arrays.
VaultArchiveCountThe number of archives in the vault as of LastInventoryDate .
VaultArnThe Amazon Resource Name (ARN) of the vault.
VaultCreationDateThe date the vault was created, in Coordinated Universal Time (UTC).
VaultLastInventoryDateThe date of the last vault inventory, in Coordinated Universal Time (UTC).
VaultNameThe name of the vault.
VaultSizeThe size of all the archives (including any per-archive overhead) in the vault, as of the last inventory date.

Method List


The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

AbortMultipartUploadAborts a multipart upload.
CompleteMultipartUploadCompletes a multipart upload.
ConfigSets or retrieves a configuration setting.
CreateJobCreates a new job.
CreateVaultCreates a new vault.
DeleteArchiveDeletes an archive.
DeleteNotificationInfoDeletes the notification information for the vault.
DeleteVaultDeletes the specified vault.
DoEventsProcesses events from the internal message queue.
GetJobInfoRetrieves information about the specified job.
GetJobOutputRetrieves the output from the job.
GetNotificationInfoRetrieves the notification information for the vault.
GetVaultInfoRetrieves vault details.
InterruptInterrupt the current method.
ListJobsLists the jobs in a vault.
ListMultipartUploadsLists multipart uploads.
ListPartsLists the parts of a multipart upload.
ListVaultsLists the vaults.
ResetResets the class to its initial state.
SetNotificationInfoSets notification information for a vault.
StartMultipartUploadStarts a multipart upload.
UploadArchiveUploads an archive to a vault.
UploadPartUploads a single part in a multipart upload.

Event List


The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

EndTransferThis event fires when a document finishes transferring.
ErrorInformation about errors during data delivery.
HeaderThis event is fired every time a header line comes in.
JobListFires once for each job returned when calling ListJobs or GetJobInfo.
LogThis event fires once for each log message.
MultipartUploadListFires once for each multipart upload when ListMultipartUploads is called.
PartListFires once for each part when calling ListParts.
ProgressFires during an upload or download to indicate transfer progress.
SSLServerAuthenticationFired after the server presents its certificate to the client.
SSLStatusShows the progress of the secure connection.
StartTransferThis event fires when a document starts transferring (after the headers).
TransferThis event is fired while a document transfers (delivers document).
VaultListFires once for each vault returned when calling ListVaults.

Config Settings


The following is a list of config settings for the class with short descriptions. Click on the links for further details.

AccumulatePagesWhether the class should accumulate subsequent pages of results when listing them.
EncryptionIVThe initialization vector to be used for encryption/decryption.
EncryptionKeyThe key to use during encryption/decryption.
EncryptionPasswordKDFThe KDF algorithm to use during password based encryption and decryption.
IsJobPagedWhether or not the ListJobs results are paged.
IsMultipartUploadPagedWhether or not the ListMultipartUploads results are paged.
IsPartPagedWhether or not the ListParts results are paged.
IsVaultPagedWhether or not the ListVaults results are paged.
JobCompletionFilterSpecifies the state of jobs to return when calling ListJobs.
JobDescriptionThe description for the job.
JobInventoryFormatThe format of data returned from an inventory retrieval.
JobOutputByteRangeThe byte range to retrieve.
JobRetrievalByteRangeA range of bytes to retrieve.
JobStatusFilterSpecifies the status of jobs to return when calling ListJobs.
LocationURIThe relative URI of the resource.
MaxListJobResultsThe maximum number of Jobs to return.
MaxListMultipartUploadResultsThe maximum number of Multipart Uploads to return.
MaxListPartResultsThe maximum number of Parts to return.
MaxListVaultResultsThe maximum number of Vaults to return.
PartSizeThe size in megabytes of each part in a multipart upload.
ProgressAbsoluteWhether the class should track transfer progress absolutely.
ProgressStepHow often the progress event should be fired, in terms of percentage.
RequestIdThe Amazon generated RequestId.
TransferredDataReturns the entire XML response received from the server.
URLIf set, the default URL will be overridden by this value.
AcceptEncodingUsed to tell the server which types of content encodings the client supports.
AllowHTTPCompressionThis property enables HTTP compression for receiving data.
AllowHTTPFallbackWhether HTTP/2 connections are permitted to fallback to HTTP/1.1.
AppendWhether to append data to LocalFile.
AuthorizationThe Authorization string to be sent to the server.
BytesTransferredContains the number of bytes transferred in the response data.
ChunkSizeSpecifies the chunk size in bytes when using chunked encoding.
CompressHTTPRequestSet to true to compress the body of a PUT or POST request.
EncodeURLIf set to True the URL will be encoded by the class.
FollowRedirectsDetermines what happens when the server issues a redirect.
GetOn302RedirectIf set to True the class will perform a GET on the new location.
HTTP2HeadersWithoutIndexingHTTP2 headers that should not update the dynamic header table with incremental indexing.
HTTPVersionThe version of HTTP used by the class.
IfModifiedSinceA date determining the maximum age of the desired document.
KeepAliveDetermines whether the HTTP connection is closed after completion of the request.
KerberosSPNThe Service Principal Name for the Kerberos Domain Controller.
LogLevelThe level of detail that is logged.
MaxRedirectAttemptsLimits the number of redirects that are followed in a request.
NegotiatedHTTPVersionThe negotiated HTTP version.
OtherHeadersOther headers as determined by the user (optional).
ProxyAuthorizationThe authorization string to be sent to the proxy server.
ProxyAuthSchemeThe authorization scheme to be used for the proxy.
ProxyPasswordA password if authentication is to be used for the proxy.
ProxyPortPort for the proxy server (default 80).
ProxyServerName or IP address of a proxy server (optional).
ProxyUserA user name if authentication is to be used for the proxy.
SentHeadersThe full set of headers as sent by the client.
StatusCodeThe status code of the last response from the server.
StatusLineThe first line of the last response from the server.
TransferredDataThe contents of the last response from the server.
TransferredDataLimitThe maximum number of incoming bytes to be stored by the class.
TransferredHeadersThe full set of headers as received from the server.
TransferredRequestThe full request as sent by the client.
UseChunkedEncodingEnables or Disables HTTP chunked encoding for transfers.
UseIDNsWhether to encode hostnames to internationalized domain names.
UsePlatformHTTPClientWhether or not to use the platform HTTP client.
UseProxyAutoConfigURLWhether to use a Proxy auto-config file when attempting a connection.
UserAgentInformation about the user agent (browser).
ConnectionTimeoutSets a separate timeout value for establishing a connection.
FirewallAutoDetectTells the class whether or not to automatically detect and use firewall system settings, if available.
FirewallHostName or IP address of firewall (optional).
FirewallPasswordPassword to be used if authentication is to be used when connecting through the firewall.
FirewallPortThe TCP port for the FirewallHost;.
FirewallTypeDetermines the type of firewall to connect through.
FirewallUserA user name if authentication is to be used connecting through a firewall.
KeepAliveIntervalThe retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTimeThe inactivity time in milliseconds before a TCP keep-alive packet is sent.
LingerWhen set to True, connections are terminated gracefully.
LingerTimeTime in seconds to have the connection linger.
LocalHostThe name of the local host through which connections are initiated or accepted.
LocalPortThe port in the local host where the class binds.
MaxLineLengthThe maximum amount of data to accumulate when no EOL is found.
MaxTransferRateThe transfer rate limit in bytes per second.
ProxyExceptionsListA semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAliveDetermines whether or not the keep alive socket option is enabled.
TcpNoDelayWhether or not to delay when sending packets.
UseIPv6Whether to use IPv6.
LogSSLPacketsControls whether SSL packets are logged when using the internal security API.
OpenSSLCADirThe path to a directory containing CA certificates.
OpenSSLCAFileName of the file containing the list of CA's trusted by your application.
OpenSSLCipherListA string that controls the ciphers to be used by SSL.
OpenSSLPrngSeedDataThe data to seed the pseudo random number generator (PRNG).
ReuseSSLSessionDetermines if the SSL session is reused.
SSLCACertFilePathsThe paths to CA certificate files on Unix/Linux.
SSLCACertsA newline separated list of CA certificate to use during SSL client authentication.
SSLCheckCRLWhether to check the Certificate Revocation List for the server certificate.
SSLCheckOCSPWhether to use OCSP to check the status of the server certificate.
SSLCipherStrengthThe minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuitesThe cipher suite to be used in an SSL negotiation.
SSLEnabledProtocolsUsed to enable/disable the supported security protocols.
SSLEnableRenegotiationWhether the renegotiation_info SSL extension is supported.
SSLIncludeCertChainWhether the entire certificate chain is included in the SSLServerAuthentication event.
SSLKeyLogFileThe location of a file where per-session secrets are written for debugging purposes.
SSLNegotiatedCipherReturns the negotiated cipher suite.
SSLNegotiatedCipherStrengthReturns the negotiated cipher suite strength.
SSLNegotiatedCipherSuiteReturns the negotiated cipher suite.
SSLNegotiatedKeyExchangeReturns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrengthReturns the negotiated key exchange algorithm strength.
SSLNegotiatedVersionReturns the negotiated protocol version.
SSLSecurityFlagsFlags that control certificate verification.
SSLServerCACertsA newline separated list of CA certificate to use during SSL server certificate validation.
TLS12SignatureAlgorithmsDefines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.
TLS12SupportedGroupsThe supported groups for ECC.
TLS13KeyShareGroupsThe groups for which to pregenerate key shares.
TLS13SignatureAlgorithmsThe allowed certificate signature algorithms.
TLS13SupportedGroupsThe supported groups for (EC)DHE key exchange.
AbsoluteTimeoutDetermines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallDataUsed to send extra data to the firewall.
InBufferSizeThe size in bytes of the incoming queue of the socket.
OutBufferSizeThe size in bytes of the outgoing queue of the socket.
BuildInfoInformation about the product's build.
CodePageThe system code page used for Unicode to Multibyte translations.
LicenseInfoInformation about the current license.
MaskSensitiveWhether sensitive data is masked in log messages.
ProcessIdleEventsWhether the class uses its internal event loop to process events when the main thread is idle.
SelectWaitMillisThe length of time in milliseconds the class will wait when DoEvents is called if there are no events to process.
UseFIPSCompliantAPITells the class whether or not to use FIPS certified APIs.
UseInternalSecurityAPITells the class whether or not to use the system security libraries or an internal implementation.

AccessKey Property (CloudStorage_AmazonGlacier Class)

The access key to use for authentication.

Object Oriented Interface


public function getAccessKey();


public function setAccessKey($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 1 );


cloudstorage_amazonglacier_set($res, 1, $value );

Default Value

''

Remarks

This property specifies the access key that should be used for authentication. Both this property and SecretKey must be set before attempting any operations which connect to the server.

Data Type

String

ArchiveData Property (CloudStorage_AmazonGlacier Class)

Holds the archive data.

Object Oriented Interface


public function getArchiveData();


public function setArchiveData($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 2 );


cloudstorage_amazonglacier_set($res, 2, $value );

Default Value

''

Remarks

This property holds the archive data. It is populated after calling GetJobOutput when the job is an archive retrieval. It may be set to archive data before calling UploadArchive.

This property is not available at design time.

Data Type

Binary String

EncryptionAlgorithm Property (CloudStorage_AmazonGlacier Class)

The encryption algorithm.

Object Oriented Interface


public function getEncryptionAlgorithm();


public function setEncryptionAlgorithm($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 3 );


cloudstorage_amazonglacier_set($res, 3, $value );

Default Value

0

Remarks

This property specifies the encryption algorithm to be used. The maximum allowable key size is automatically used for the selected algorithm. Possible values are:

Algorithm Key Size
0 (eaAES - default) 256
1 (eaBlowfish) 448
2 (eaCAST) 128
3 (eaDES) 64
4 (eaIDEA) 128
5 (eaRC2) 128
6 (eaRC4) 2048
7 (eaTEA) 128
8 (eaTripleDES) 192
9 (eaTwofish) 256
10 (eaRijndael) 256
11 (eaChaCha) 256
12 (eaXSalsa20) 256

Data Type

Integer

EncryptionPassword Property (CloudStorage_AmazonGlacier Class)

The encryption password.

Object Oriented Interface


public function getEncryptionPassword();


public function setEncryptionPassword($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 4 );


cloudstorage_amazonglacier_set($res, 4, $value );

Default Value

''

Remarks

If this property is populated when UploadFile or DownloadFile is called, the class will attempt to encrypt or decrypt the data before uploading or after downloading it.

The class uses the value specified here to generate the necessary encryption Key and IV values using the PKCS5 password digest algorithm. This provides a simpler alternative to creating and managing Key and IV values directly.

However, it is also possible to explicitly specify the Key and IV values to use by setting the EncryptionKey and EncryptionIV configuration settings. This may be necessary if, e.g., the data needs to be encrypted/decrypted by another utility which generates Key and IV values differently.

This property is not available at design time.

Data Type

String

FirewallAutoDetect Property (CloudStorage_AmazonGlacier Class)

This property tells the class whether or not to automatically detect and use firewall system settings, if available.

Object Oriented Interface


public function getFirewallAutoDetect();


public function setFirewallAutoDetect($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 5 );


cloudstorage_amazonglacier_set($res, 5, $value );

Default Value

false

Remarks

This property tells the class whether or not to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (CloudStorage_AmazonGlacier Class)

This property determines the type of firewall to connect through.

Object Oriented Interface


public function getFirewallType();


public function setFirewallType($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 6 );


cloudstorage_amazonglacier_set($res, 6, $value );

Default Value

0

Remarks

This property determines the type of firewall to connect through. The applicable values are as follows:

fwNone (0)No firewall (default setting).
fwTunnel (1)Connect through a tunneling proxy. FirewallPort is set to 80.
fwSOCKS4 (2)Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
fwSOCKS5 (3)Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
fwSOCKS4A (10)Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Data Type

Integer

FirewallHost Property (CloudStorage_AmazonGlacier Class)

This property contains the name or IP address of firewall (optional).

Object Oriented Interface


public function getFirewallHost();


public function setFirewallHost($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 7 );


cloudstorage_amazonglacier_set($res, 7, $value );

Default Value

''

Remarks

This property contains the name or IP address of firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the class fails with an error.

Data Type

String

FirewallPassword Property (CloudStorage_AmazonGlacier Class)

This property contains a password if authentication is to be used when connecting through the firewall.

Object Oriented Interface


public function getFirewallPassword();


public function setFirewallPassword($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 8 );


cloudstorage_amazonglacier_set($res, 8, $value );

Default Value

''

Remarks

This property contains a password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the class fails with an error.

Data Type

String

FirewallPort Property (CloudStorage_AmazonGlacier Class)

This property contains the transmission control protocol (TCP) port for the firewall Host .

Object Oriented Interface


public function getFirewallPort();


public function setFirewallPort($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 9 );


cloudstorage_amazonglacier_set($res, 9, $value );

Default Value

0

Remarks

This property contains the transmission control protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (CloudStorage_AmazonGlacier Class)

This property contains a user name if authentication is to be used connecting through a firewall.

Object Oriented Interface


public function getFirewallUser();


public function setFirewallUser($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 10 );


cloudstorage_amazonglacier_set($res, 10, $value );

Default Value

''

Remarks

This property contains a user name if authentication is to be used connecting through a firewall. If the FirewallHost is specified, this property and FirewallPassword properties are used to connect and authenticate to the given Firewall. If the authentication fails, the class fails with an error.

Data Type

String

Idle Property (CloudStorage_AmazonGlacier Class)

The current status of the class.

Object Oriented Interface


public function getIdle();


Procedural Interface


cloudstorage_amazonglacier_get($res, 11 );


Default Value

true

Remarks

Idle will be False if the component is currently busy (communicating and/or waiting for an answer), and True at all other times.

This property is read-only.

Data Type

Boolean

InventoryData Property (CloudStorage_AmazonGlacier Class)

Holds the inventory data.

Object Oriented Interface


public function getInventoryData();


Procedural Interface


cloudstorage_amazonglacier_get($res, 12 );


Default Value

''

Remarks

This property holds the inventory data and is populated after calling GetJobOutput if the job is an inventory retrieval job.

This property is read-only and not available at design time.

Data Type

Binary String

JobMarker Property (CloudStorage_AmazonGlacier Class)

A marker used to get the next page of results.

Object Oriented Interface


public function getJobMarker();


public function setJobMarker($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 13 );


cloudstorage_amazonglacier_set($res, 13, $value );

Default Value

''

Remarks

This property is populated after calling ListJobs if the results are paged. This property holds the marker that will be sent in the next call to ListJobs to get the next page of results.

This property is not available at design time.

Data Type

String

JobCount Property (CloudStorage_AmazonGlacier Class)

The number of records in the Job arrays.

Object Oriented Interface


public function getJobCount();


Procedural Interface


cloudstorage_amazonglacier_get($res, 14 );


Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at JobCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

JobArchiveId Property (CloudStorage_AmazonGlacier Class)

This property is populated with the ArchiveId associated with the Job.

Object Oriented Interface


public function getJobArchiveId($jobindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 15 , $jobindex);


Default Value

''

Remarks

This property is populated with the ArchiveId associated with the Job.

This is only applicable when JobType is 0 (archive retrieval).

The $jobindex parameter specifies the index of the item in the array. The size of the array is controlled by the JobCount property.

This property is read-only and not available at design time.

Data Type

String

JobArchiveSHA256TreeHash Property (CloudStorage_AmazonGlacier Class)

The SHA256 tree hash of the entire archive for an archive retrieval job.

Object Oriented Interface


public function getJobArchiveSHA256TreeHash($jobindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 16 , $jobindex);


Default Value

''

Remarks

The SHA256 tree hash of the entire archive for an archive retrieval job.

This is only applicable when JobType is 0 (archive retrieval).

The $jobindex parameter specifies the index of the item in the array. The size of the array is controlled by the JobCount property.

This property is read-only and not available at design time.

Data Type

String

JobArchiveSize Property (CloudStorage_AmazonGlacier Class)

The size of the archive in bytes.

Object Oriented Interface


public function getJobArchiveSize($jobindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 17 , $jobindex);


Default Value

0

Remarks

The size of the archive in bytes.

This is only applicable when JobType is 0 (archive retrieval).

The $jobindex parameter specifies the index of the item in the array. The size of the array is controlled by the JobCount property.

This property is read-only and not available at design time.

Data Type

Long64

JobCompleted Property (CloudStorage_AmazonGlacier Class)

Indicates the completion status of the job.

Object Oriented Interface


public function getJobCompleted($jobindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 18 , $jobindex);


Default Value

false

Remarks

Indicates the completion status of the job. By default both incomplete jobs and recently completed jobs are returned when calling ListJobs. See JobCompletionFilter for more options.

The $jobindex parameter specifies the index of the item in the array. The size of the array is controlled by the JobCount property.

This property is read-only and not available at design time.

Data Type

Boolean

JobCompletionDate Property (CloudStorage_AmazonGlacier Class)

The UTC time that the job completed.

Object Oriented Interface


public function getJobCompletionDate($jobindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 19 , $jobindex);


Default Value

''

Remarks

The UTC time that the job completed.

The $jobindex parameter specifies the index of the item in the array. The size of the array is controlled by the JobCount property.

This property is read-only and not available at design time.

Data Type

String

JobCreationDate Property (CloudStorage_AmazonGlacier Class)

The UTC time that the job was created.

Object Oriented Interface


public function getJobCreationDate($jobindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 20 , $jobindex);


Default Value

''

Remarks

The UTC time that the job was created. This is a string representation of ISO 8601 date format, for example: "2012-03-20T17:03:43.221Z".

The $jobindex parameter specifies the index of the item in the array. The size of the array is controlled by the JobCount property.

This property is read-only and not available at design time.

Data Type

String

JobDescription Property (CloudStorage_AmazonGlacier Class)

The user supplied description.

Object Oriented Interface


public function getJobDescription($jobindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 21 , $jobindex);


Default Value

''

Remarks

The user supplied description. This is specified by the JobDescription setting before calling CreateJob.

The $jobindex parameter specifies the index of the item in the array. The size of the array is controlled by the JobCount property.

This property is read-only and not available at design time.

Data Type

String

JobInventorySize Property (CloudStorage_AmazonGlacier Class)

The size in bytes of the inventory data.

Object Oriented Interface


public function getJobInventorySize($jobindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 22 , $jobindex);


Default Value

0

Remarks

The size in bytes of the inventory data. This is only applicable when JobType is 1 (inventory retrieval).

The $jobindex parameter specifies the index of the item in the array. The size of the array is controlled by the JobCount property.

This property is read-only and not available at design time.

Data Type

Long64

JobId Property (CloudStorage_AmazonGlacier Class)

The Amazon assigned JobId.

Object Oriented Interface


public function getJobId($jobindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 23 , $jobindex);


Default Value

''

Remarks

The Amazon assigned JobId.

The $jobindex parameter specifies the index of the item in the array. The size of the array is controlled by the JobCount property.

This property is read-only and not available at design time.

Data Type

String

JobSHA256TreeHash Property (CloudStorage_AmazonGlacier Class)

The SHA256 tree hash value for the requested range of an archive.

Object Oriented Interface


public function getJobSHA256TreeHash($jobindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 24 , $jobindex);


Default Value

''

Remarks

The SHA256 tree hash value for the requested range of an archive. This is only applicable when JobType is 0 (archive retrieval) and a JobRetrievalByteRange is set to a tree-hash aligned range.

When the whole archive is retrieved this values is the same as JobArchiveSHA256TreeHash.

The $jobindex parameter specifies the index of the item in the array. The size of the array is controlled by the JobCount property.

This property is read-only and not available at design time.

Data Type

String

JobSNSTopic Property (CloudStorage_AmazonGlacier Class)

The Amazon SNS topic that will receive notifications about the job status.

Object Oriented Interface


public function getJobSNSTopic($jobindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 25 , $jobindex);


Default Value

''

Remarks

The Amazon SNS topic that will receive notifications about the job status.

The $jobindex parameter specifies the index of the item in the array. The size of the array is controlled by the JobCount property.

This property is read-only and not available at design time.

Data Type

String

JobStatusCode Property (CloudStorage_AmazonGlacier Class)

The current status of the job.

Object Oriented Interface


public function getJobStatusCode($jobindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 26 , $jobindex);


Default Value

0

Remarks

The current status of the job. Possible values are:

  • jsNone (0)
  • jsInProgress (1)
  • jsSucceeded (2)
  • jsFailed (3)

The $jobindex parameter specifies the index of the item in the array. The size of the array is controlled by the JobCount property.

This property is read-only and not available at design time.

Data Type

Integer

JobStatusMessage Property (CloudStorage_AmazonGlacier Class)

A user friendly description of the status.

Object Oriented Interface


public function getJobStatusMessage($jobindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 27 , $jobindex);


Default Value

''

Remarks

A user friendly description of the status.

The $jobindex parameter specifies the index of the item in the array. The size of the array is controlled by the JobCount property.

This property is read-only and not available at design time.

Data Type

String

JobType Property (CloudStorage_AmazonGlacier Class)

The type of the current job.

Object Oriented Interface


public function getJobType($jobindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 28 , $jobindex);


Default Value

0

Remarks

The type of the current job. Possible values are:

  • jtArchiveRetrieval (0)
  • jtInventoryRetrieval (1)

The $jobindex parameter specifies the index of the item in the array. The size of the array is controlled by the JobCount property.

This property is read-only and not available at design time.

Data Type

Integer

JobVaultArn Property (CloudStorage_AmazonGlacier Class)

The Amazon Resource Name (ARN) of the vault from which the archive retrieval or inventory retrieval was requested.

Object Oriented Interface


public function getJobVaultArn($jobindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 29 , $jobindex);


Default Value

''

Remarks

The Amazon Resource Name (ARN) of the vault from which the archive retrieval or inventory retrieval was requested.

The $jobindex parameter specifies the index of the item in the array. The size of the array is controlled by the JobCount property.

This property is read-only and not available at design time.

Data Type

String

LocalFile Property (CloudStorage_AmazonGlacier Class)

The path to a local file for uploading or downloading.

Object Oriented Interface


public function getLocalFile();


public function setLocalFile($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 30 );


cloudstorage_amazonglacier_set($res, 30, $value );

Default Value

''

Remarks

This property is used to specify a local file that will be used for uploading or downloading. Set this to a local file before calling GetJobOutput. Set this to a local file to upload before calling UploadArchive.

This property is not available at design time.

Data Type

String

LocalHost Property (CloudStorage_AmazonGlacier Class)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Object Oriented Interface


public function getLocalHost();


public function setLocalHost($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 31 );


cloudstorage_amazonglacier_set($res, 31, $value );

Default Value

''

Remarks

The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

MultipartUploadMarker Property (CloudStorage_AmazonGlacier Class)

A marker used to get the next page of results.

Object Oriented Interface


public function getMultipartUploadMarker();


public function setMultipartUploadMarker($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 32 );


cloudstorage_amazonglacier_set($res, 32, $value );

Default Value

''

Remarks

This property is populated after calling ListMultipartUploads if the results are paged. This property holds the marker that will be sent in the next call to ListMultipartUploads to get the next page of results.

This property is not available at design time.

Data Type

String

MultipartUploadCount Property (CloudStorage_AmazonGlacier Class)

The number of records in the MultipartUpload arrays.

Object Oriented Interface


public function getMultipartUploadCount();


Procedural Interface


cloudstorage_amazonglacier_get($res, 33 );


Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at MultipartUploadCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

MultipartUploadArchiveDescription Property (CloudStorage_AmazonGlacier Class)

The description of the archive (if any).

Object Oriented Interface


public function getMultipartUploadArchiveDescription($multipartuploadindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 34 , $multipartuploadindex);


Default Value

''

Remarks

The description of the archive (if any).

The $multipartuploadindex parameter specifies the index of the item in the array. The size of the array is controlled by the MultipartUploadCount property.

This property is read-only and not available at design time.

Data Type

String

MultipartUploadCreationDate Property (CloudStorage_AmazonGlacier Class)

The UTC time that the multipart upload was started.

Object Oriented Interface


public function getMultipartUploadCreationDate($multipartuploadindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 35 , $multipartuploadindex);


Default Value

''

Remarks

The UTC time that the multipart upload was started. This is a string representation of ISO 8601 date format. For example: "2012-03-20T17:03:43.221Z".

The $multipartuploadindex parameter specifies the index of the item in the array. The size of the array is controlled by the MultipartUploadCount property.

This property is read-only and not available at design time.

Data Type

String

MultipartUploadPartSize Property (CloudStorage_AmazonGlacier Class)

The part size in bytes.

Object Oriented Interface


public function getMultipartUploadPartSize($multipartuploadindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 36 , $multipartuploadindex);


Default Value

0

Remarks

The part size in bytes. This is specified by the PartSize setting and is used when StartMultipartUpload is called.

The $multipartuploadindex parameter specifies the index of the item in the array. The size of the array is controlled by the MultipartUploadCount property.

This property is read-only and not available at design time.

Data Type

Integer

MultipartUploadId Property (CloudStorage_AmazonGlacier Class)

The Id of the multipart upload.

Object Oriented Interface


public function getMultipartUploadId($multipartuploadindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 37 , $multipartuploadindex);


Default Value

''

Remarks

The Id of the multipart upload.

The $multipartuploadindex parameter specifies the index of the item in the array. The size of the array is controlled by the MultipartUploadCount property.

This property is read-only and not available at design time.

Data Type

String

MultipartUploadVaultArn Property (CloudStorage_AmazonGlacier Class)

The Amazon Resource Name (ARN) of the Vault in which the archive is created.

Object Oriented Interface


public function getMultipartUploadVaultArn($multipartuploadindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 38 , $multipartuploadindex);


Default Value

''

Remarks

The Amazon Resource Name (ARN) of the Vault in which the archive is created.

The $multipartuploadindex parameter specifies the index of the item in the array. The size of the array is controlled by the MultipartUploadCount property.

This property is read-only and not available at design time.

Data Type

String

NotifyEventType Property (CloudStorage_AmazonGlacier Class)

This property specifies the type of enabled notifications for the vault.

Object Oriented Interface


public function getNotifyEventType();


public function setNotifyEventType($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 39 );


cloudstorage_amazonglacier_set($res, 39, $value );

Default Value

0

Remarks

This property specifies the type of enabled notifications for the vault. Possible values are:

0 (etBoth - default) Notifications for both inventory and archive retrieval jobs.
1 (etArchiveRetrievalCompleted) Notifications are sent when an archive retrieval job is complete.
2 (etInventoryRetrievalCompleted) Notifications are sent when an inventory retrieval job is complete.

This property is not available at design time.

Data Type

Integer

NotifySNSTopic Property (CloudStorage_AmazonGlacier Class)

This property specifies the Amazon SNS Topic ARN that is used to deliver notifications.

Object Oriented Interface


public function getNotifySNSTopic();


public function setNotifySNSTopic($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 40 );


cloudstorage_amazonglacier_set($res, 40, $value );

Default Value

''

Remarks

This property specifies the Amazon SNS Topic ARN that is used to deliver notifications. The topic must already exist.

This property is not available at design time.

Data Type

String

OtherHeaders Property (CloudStorage_AmazonGlacier Class)

This property includes other headers as determined by the user (optional).

Object Oriented Interface


public function getOtherHeaders();


public function setOtherHeaders($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 41 );


cloudstorage_amazonglacier_set($res, 41, $value );

Default Value

''

Remarks

This property can be set to a string of headers to be appended to the HTTP request headers created from other properties like ContentType and From.

The headers must follow the format Header: Value as described in the HTTP specifications. Header lines should be separated by CRLF ("\r\n") .

Use this property with caution. If this property contains invalid headers, HTTP requests may fail.

This property is useful for extending the functionality of the class beyond what is provided.

This property is not available at design time.

Data Type

String

Overwrite Property (CloudStorage_AmazonGlacier Class)

Whether or not the class should overwrite files during transfer.

Object Oriented Interface


public function getOverwrite();


public function setOverwrite($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 42 );


cloudstorage_amazonglacier_set($res, 42, $value );

Default Value

false

Remarks

This property is a indicates whether or not the class should overwrite downloaded data. If Overwrite is false, the class fails with an error whenever LocalFile exists and GetJobOutput is called.

Data Type

Boolean

ParsedHeaderCount Property (CloudStorage_AmazonGlacier Class)

The number of records in the ParsedHeader arrays.

Object Oriented Interface


public function getParsedHeaderCount();


Procedural Interface


cloudstorage_amazonglacier_get($res, 43 );


Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at ParsedHeaderCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

ParsedHeaderField Property (CloudStorage_AmazonGlacier Class)

This property contains the name of the HTTP header (this is the same case as it is delivered).

Object Oriented Interface


public function getParsedHeaderField($parsedheaderindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 44 , $parsedheaderindex);


Default Value

''

Remarks

This property contains the name of the HTTP Header (this is the same case as it is delivered).

The $parsedheaderindex parameter specifies the index of the item in the array. The size of the array is controlled by the ParsedHeaderCount property.

This property is read-only and not available at design time.

Data Type

String

ParsedHeaderValue Property (CloudStorage_AmazonGlacier Class)

This property contains the header contents.

Object Oriented Interface


public function getParsedHeaderValue($parsedheaderindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 45 , $parsedheaderindex);


Default Value

''

Remarks

This property contains the Header contents.

The $parsedheaderindex parameter specifies the index of the item in the array. The size of the array is controlled by the ParsedHeaderCount property.

This property is read-only and not available at design time.

Data Type

String

PartMarker Property (CloudStorage_AmazonGlacier Class)

A marker used to get the next page of results.

Object Oriented Interface


public function getPartMarker();


public function setPartMarker($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 46 );


cloudstorage_amazonglacier_set($res, 46, $value );

Default Value

''

Remarks

This property is populated after calling ListParts if the results are paged. This property holds the marker that will be sent in the next call to ListParts to get the next page of results.

This property is not available at design time.

Data Type

String

PartCount Property (CloudStorage_AmazonGlacier Class)

The number of records in the Part arrays.

Object Oriented Interface


public function getPartCount();


Procedural Interface


cloudstorage_amazonglacier_get($res, 47 );


Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at PartCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

PartArchiveDescription Property (CloudStorage_AmazonGlacier Class)

The description of the archive (if any).

Object Oriented Interface


public function getPartArchiveDescription($partindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 48 , $partindex);


Default Value

''

Remarks

The description of the archive (if any).

The $partindex parameter specifies the index of the item in the array. The size of the array is controlled by the PartCount property.

This property is read-only and not available at design time.

Data Type

String

PartCreationDate Property (CloudStorage_AmazonGlacier Class)

The UTC time that the multipart upload was started.

Object Oriented Interface


public function getPartCreationDate($partindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 49 , $partindex);


Default Value

''

Remarks

The UTC time that the multipart upload was started. This is a string representation of ISO 8601 date format. For example: "2012-03-20T17:03:43.221Z".

The $partindex parameter specifies the index of the item in the array. The size of the array is controlled by the PartCount property.

This property is read-only and not available at design time.

Data Type

String

PartSHA256TreeHash Property (CloudStorage_AmazonGlacier Class)

The SHA256 tree hash value that Amazon calculated for the part.

Object Oriented Interface


public function getPartSHA256TreeHash($partindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 50 , $partindex);


Default Value

''

Remarks

The SHA256 tree hash value that Amazon calculated for the part.

The $partindex parameter specifies the index of the item in the array. The size of the array is controlled by the PartCount property.

This property is read-only and not available at design time.

Data Type

String

PartSize Property (CloudStorage_AmazonGlacier Class)

The part size in bytes.

Object Oriented Interface


public function getPartSize($partindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 51 , $partindex);


Default Value

0

Remarks

The part size in bytes.

The $partindex parameter specifies the index of the item in the array. The size of the array is controlled by the PartCount property.

This property is read-only and not available at design time.

Data Type

Long64

PartStartPosition Property (CloudStorage_AmazonGlacier Class)

The byte offset in the archive of the current part.

Object Oriented Interface


public function getPartStartPosition($partindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 52 , $partindex);


Default Value

0

Remarks

The byte offset in the archive of the current part.

The $partindex parameter specifies the index of the item in the array. The size of the array is controlled by the PartCount property.

This property is read-only and not available at design time.

Data Type

Long64

PartUploadId Property (CloudStorage_AmazonGlacier Class)

The Id of the multipart upload associated with this part.

Object Oriented Interface


public function getPartUploadId($partindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 53 , $partindex);


Default Value

''

Remarks

The Id of the multipart upload associated with this part.

The $partindex parameter specifies the index of the item in the array. The size of the array is controlled by the PartCount property.

This property is read-only and not available at design time.

Data Type

String

PartVaultArn Property (CloudStorage_AmazonGlacier Class)

The Amazon Resource Name (ARN) of the Vault in which the archive is created.

Object Oriented Interface


public function getPartVaultArn($partindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 54 , $partindex);


Default Value

''

Remarks

The Amazon Resource Name (ARN) of the Vault in which the archive is created.

The $partindex parameter specifies the index of the item in the array. The size of the array is controlled by the PartCount property.

This property is read-only and not available at design time.

Data Type

String

ProxyAuthScheme Property (CloudStorage_AmazonGlacier Class)

This property is used to tell the class which type of authorization to perform when connecting to the proxy.

Object Oriented Interface


public function getProxyAuthScheme();


public function setProxyAuthScheme($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 55 );


cloudstorage_amazonglacier_set($res, 55, $value );

Default Value

0

Remarks

This property is used to tell the class which type of authorization to perform when connecting to the proxy. This is used only when the ProxyUser and ProxyPassword properties are set.

ProxyAuthScheme should be set to authNone (3) when no authentication is expected.

By default, ProxyAuthScheme is authBasic (0), and if the ProxyUser and ProxyPassword properties are set, the component will attempt basic authentication.

If ProxyAuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If ProxyAuthScheme is set to authProprietary (2), then the authorization token will not be generated by the class. Look at the configuration file for the class being used to find more information about manually setting this token.

If ProxyAuthScheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of ProxyUser and ProxyPassword.

Data Type

Integer

ProxyAutoDetect Property (CloudStorage_AmazonGlacier Class)

This property tells the class whether or not to automatically detect and use proxy system settings, if available.

Object Oriented Interface


public function getProxyAutoDetect();


public function setProxyAutoDetect($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 56 );


cloudstorage_amazonglacier_set($res, 56, $value );

Default Value

false

Remarks

This property tells the class whether or not to automatically detect and use proxy system settings, if available. The default value is false.

Data Type

Boolean

ProxyPassword Property (CloudStorage_AmazonGlacier Class)

This property contains a password if authentication is to be used for the proxy.

Object Oriented Interface


public function getProxyPassword();


public function setProxyPassword($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 57 );


cloudstorage_amazonglacier_set($res, 57, $value );

Default Value

''

Remarks

This property contains a password if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

ProxyPort Property (CloudStorage_AmazonGlacier Class)

This property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).

Object Oriented Interface


public function getProxyPort();


public function setProxyPort($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 58 );


cloudstorage_amazonglacier_set($res, 58, $value );

Default Value

80

Remarks

This property contains the Transmission Control Protocol (TCP) port for the proxy ProxyServer (default 80). See the description of the ProxyServer property for details.

Data Type

Integer

ProxyServer Property (CloudStorage_AmazonGlacier Class)

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

Object Oriented Interface


public function getProxyServer();


public function setProxyServer($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 59 );


cloudstorage_amazonglacier_set($res, 59, $value );

Default Value

''

Remarks

If a proxy ProxyServer is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the ProxyServer property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the ProxyServer property is set to the corresponding address. If the search is not successful, an error is returned.

Data Type

String

ProxySSL Property (CloudStorage_AmazonGlacier Class)

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.

Object Oriented Interface


public function getProxySSL();


public function setProxySSL($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 60 );


cloudstorage_amazonglacier_set($res, 60, $value );

Default Value

0

Remarks

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

psAutomatic (0)Default setting. If the URL is an https URL, the class will use the psTunnel option. If the URL is an http URL, the class will use the psNever option.
psAlways (1)The connection is always SSL enabled.
psNever (2)The connection is not SSL enabled.
psTunnel (3)The connection is made through a tunneling (HTTP) proxy.

Data Type

Integer

ProxyUser Property (CloudStorage_AmazonGlacier Class)

This property contains a user name, if authentication is to be used for the proxy.

Object Oriented Interface


public function getProxyUser();


public function setProxyUser($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 61 );


cloudstorage_amazonglacier_set($res, 61, $value );

Default Value

''

Remarks

This property contains a user name, if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

Region Property (CloudStorage_AmazonGlacier Class)

The region the class will make requests against.

Object Oriented Interface


public function getRegion();


public function setRegion($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 62 );


cloudstorage_amazonglacier_set($res, 62, $value );

Default Value

'us-east-1'

Remarks

This property controls which region the class will make requests against. By default the class uses us-east-1, the US East (N. Virginia) region. This property should be changed to create or access resources in other regions.

Regions:

Value Region
us-east-1 (Default) US East (N. Virginia)
us-east-2 US East (Ohio)
us-west-1 US West (N. California)
us-west-2 US West (Oregon)
ap-east-1 Asia Pacific (Hong Kong)
ap-northeast-1 Asia Pacific (Tokyo)
ap-northeast-2 Asia Pacific (Seoul)
ap-northeast-3 Asia Pacific (Osaka-Local)
ap-south-1 Asia Pacific (Mumbai)
ap-southeast-1 Asia Pacific (Singapore)
ap-southeast-2 Asia Pacific (Sydney)
ca-central-1 Canada (Central)
cn-north-1 China (Beijing)
cn-northwest-1 China (Ningxia)
eu-central-1 Europe (Frankfurt)
eu-north-1 Europe (Stockholm)
eu-south-1 Europe (Milan)
eu-west-1 Europe (Ireland)
eu-west-2 Europe (London)
eu-west-3 Europe (Paris)
me-south-1 Middle East (Bahrain)
sa-east-1 South America (Sao Paulo)

The class will always convert this property's value to lowercase. If this property is cleared, the class will reset it to the default value.

Data Type

String

SecretKey Property (CloudStorage_AmazonGlacier Class)

The secret key to use for authentication.

Object Oriented Interface


public function getSecretKey();


public function setSecretKey($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 63 );


cloudstorage_amazonglacier_set($res, 63, $value );

Default Value

''

Remarks

This property specifies the secret key that should be used for authentication. Both this property and AccessKey must be set before attempting any operations which connect to the server.

Data Type

String

SSLAcceptServerCertEncoded Property (CloudStorage_AmazonGlacier Class)

This is the certificate (PEM/base64 encoded).

Object Oriented Interface


public function getSSLAcceptServerCertEncoded();


public function setSSLAcceptServerCertEncoded($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 65 );


cloudstorage_amazonglacier_set($res, 65, $value );

Default Value

''

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Binary String

SSLCertEncoded Property (CloudStorage_AmazonGlacier Class)

This is the certificate (PEM/base64 encoded).

Object Oriented Interface


public function getSSLCertEncoded();


public function setSSLCertEncoded($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 93 );


cloudstorage_amazonglacier_set($res, 93, $value );

Default Value

''

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Binary String

SSLCertStore Property (CloudStorage_AmazonGlacier Class)

This is the name of the certificate store for the client certificate.

Object Oriented Interface


public function getSSLCertStore();


public function setSSLCertStore($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 109 );


cloudstorage_amazonglacier_set($res, 109, $value );

Default Value

'MY'

Remarks

This is the name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

Data Type

Binary String

SSLCertStorePassword Property (CloudStorage_AmazonGlacier Class)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Object Oriented Interface


public function getSSLCertStorePassword();


public function setSSLCertStorePassword($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 110 );


cloudstorage_amazonglacier_set($res, 110, $value );

Default Value

''

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (CloudStorage_AmazonGlacier Class)

This is the type of certificate store for this certificate.

Object Oriented Interface


public function getSSLCertStoreType();


public function setSSLCertStoreType($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 111 );


cloudstorage_amazonglacier_set($res, 111, $value );

Default Value

0

Remarks

This is the type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used the class will automatically determine the type. This property can take one of the following values:

0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: this store type is not available in Java.
1 (cstMachine)For Windows, this specifies that the certificate store is a machine store. Note: this store type is not available in Java.
2 (cstPFXFile)The certificate store is the name of a PFX (PKCS12) file containing certificates.
3 (cstPFXBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in PFX (PKCS12) format.
4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: this store type is only available in Java.
5 (cstJKSBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)The certificate store is a string (binary or base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)The certificate store is a string (binary or base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)The certificate store is the name of a PKCS7 file containing certificates.
12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS7 format.
13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: this store type is only available in Java and .NET.
22 (cstBCFKSBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: this store type is only available in Java and .NET.
23 (cstPKCS11)The certificate is present on a physical security key accessible via a PKCS11 interface.

To use a security key the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS11 dll. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

When using a certificate, pass the previously saved security key information as the SSLCertStore and set SSLCertStorePassword to the PIN.

Code Example: SSH Authentication with Security Key certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Data Type

Integer

SSLCertSubject Property (CloudStorage_AmazonGlacier Class)

This is the subject of the certificate used for client authentication.

Object Oriented Interface


public function getSSLCertSubject();


public function setSSLCertSubject($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 112 );


cloudstorage_amazonglacier_set($res, 112, $value );

Default Value

''

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are displayed below.

FieldMeaning
CNCommon Name. This is commonly a host name like www.server.com.
OOrganization
OUOrganizational Unit
LLocality
SState
CCountry
EEmail Address

If a field value contains a comma it must be quoted.

Data Type

String

SSLProvider Property (CloudStorage_AmazonGlacier Class)

This specifies the SSL/TLS implementation to use.

Object Oriented Interface


public function getSSLProvider();


public function setSSLProvider($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 120 );


cloudstorage_amazonglacier_set($res, 120, $value );

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:

0 (sslpAutomatic - default)Automatically selects the appropriate implementation.
1 (sslpPlatform) Uses the platform/system implementation.
2 (sslpInternal) Uses the internal implementation.
Additional Notes

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected, on Windows the class will use the platform implementation. On Linux/macOS the class will use the internal implementation. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used on all platforms.

Data Type

Integer

SSLServerCertEncoded Property (CloudStorage_AmazonGlacier Class)

This is the certificate (PEM/base64 encoded).

Object Oriented Interface


public function getSSLServerCertEncoded();


Procedural Interface


cloudstorage_amazonglacier_get($res, 122 );


Default Value

''

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

This property is read-only and not available at design time.

Data Type

Binary String

Timeout Property (CloudStorage_AmazonGlacier Class)

A timeout for the class.

Object Oriented Interface


public function getTimeout();


public function setTimeout($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 149 );


cloudstorage_amazonglacier_set($res, 149, $value );

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the class will wait for the operation to complete before returning control.

The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the class fails with an error.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

UseSSL Property (CloudStorage_AmazonGlacier Class)

Whether to use SSL/TLS when connecting.

Object Oriented Interface


public function getUseSSL();


public function setUseSSL($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 150 );


cloudstorage_amazonglacier_set($res, 150, $value );

Default Value

true

Remarks

This property specifies whether the class should use SSL/TLS when connecting.

This property is not available at design time.

Data Type

Boolean

VaultMarker Property (CloudStorage_AmazonGlacier Class)

A marker used to get the next page of results.

Object Oriented Interface


public function getVaultMarker();


public function setVaultMarker($value);

Procedural Interface


cloudstorage_amazonglacier_get($res, 151 );


cloudstorage_amazonglacier_set($res, 151, $value );

Default Value

''

Remarks

This property is populated after calling ListVaults if the results are paged. This property holds the marker that will be sent in the next call to ListVaults to get the next page of results.

This property is not available at design time.

Data Type

String

VaultCount Property (CloudStorage_AmazonGlacier Class)

The number of records in the Vault arrays.

Object Oriented Interface


public function getVaultCount();


Procedural Interface


cloudstorage_amazonglacier_get($res, 152 );


Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at VaultCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

VaultArchiveCount Property (CloudStorage_AmazonGlacier Class)

The number of archives in the vault as of LastInventoryDate .

Object Oriented Interface


public function getVaultArchiveCount($vaultindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 153 , $vaultindex);


Default Value

0

Remarks

The number of archives in the vault as of VaultLastInventoryDate.

The $vaultindex parameter specifies the index of the item in the array. The size of the array is controlled by the VaultCount property.

This property is read-only and not available at design time.

Data Type

Integer

VaultArn Property (CloudStorage_AmazonGlacier Class)

The Amazon Resource Name (ARN) of the vault.

Object Oriented Interface


public function getVaultArn($vaultindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 154 , $vaultindex);


Default Value

''

Remarks

The Amazon Resource Name (ARN) of the vault.

The $vaultindex parameter specifies the index of the item in the array. The size of the array is controlled by the VaultCount property.

This property is read-only and not available at design time.

Data Type

String

VaultCreationDate Property (CloudStorage_AmazonGlacier Class)

The date the vault was created, in Coordinated Universal Time (UTC).

Object Oriented Interface


public function getVaultCreationDate($vaultindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 155 , $vaultindex);


Default Value

''

Remarks

The date the vault was created, in Coordinated Universal Time (UTC). This is a string representation of ISO 8601 date format, for example: 2012-03-20T17:03:43.221Z.

The $vaultindex parameter specifies the index of the item in the array. The size of the array is controlled by the VaultCount property.

This property is read-only and not available at design time.

Data Type

String

VaultLastInventoryDate Property (CloudStorage_AmazonGlacier Class)

The date of the last vault inventory, in Coordinated Universal Time (UTC).

Object Oriented Interface


public function getVaultLastInventoryDate($vaultindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 156 , $vaultindex);


Default Value

''

Remarks

The date of the last vault inventory, in Coordinated Universal Time (UTC). This is a string representation of ISO 8601 date format, for example: 2012-03-20T17:03:43.221Z.

The $vaultindex parameter specifies the index of the item in the array. The size of the array is controlled by the VaultCount property.

This property is read-only and not available at design time.

Data Type

String

VaultName Property (CloudStorage_AmazonGlacier Class)

The name of the vault.

Object Oriented Interface


public function getVaultName($vaultindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 157 , $vaultindex);


Default Value

''

Remarks

The name of the vault.

The $vaultindex parameter specifies the index of the item in the array. The size of the array is controlled by the VaultCount property.

This property is read-only and not available at design time.

Data Type

String

VaultSize Property (CloudStorage_AmazonGlacier Class)

The size of all the archives (including any per-archive overhead) in the vault, as of the last inventory date.

Object Oriented Interface


public function getVaultSize($vaultindex);


Procedural Interface


cloudstorage_amazonglacier_get($res, 158 , $vaultindex);


Default Value

0

Remarks

The size of all the archives (including any per-archive overhead) in the vault, as of the last inventory date.

The $vaultindex parameter specifies the index of the item in the array. The size of the array is controlled by the VaultCount property.

This property is read-only and not available at design time.

Data Type

Long64

AbortMultipartUpload Method (CloudStorage_AmazonGlacier Class)

Aborts a multipart upload.

Object Oriented Interface

public function doAbortMultipartUpload($vaultname, $uploadid);

Procedural Interface

cloudstorage_amazonglacier_do_abortmultipartupload($res, $vaultname, $uploadid);

Remarks

This method aborts a multipart upload specified by UploadId. UploadId is returned from the StartMultipartUpload method.

VaultName specifies the vault in which the archive is created.

Only multipart uploads that are not yet completed can be aborted.

CompleteMultipartUpload Method (CloudStorage_AmazonGlacier Class)

Completes a multipart upload.

Object Oriented Interface

public function doCompleteMultipartUpload($vaultname, $uploadid);

Procedural Interface

cloudstorage_amazonglacier_do_completemultipartupload($res, $vaultname, $uploadid);

Remarks

This method completes the current multipart upload specified by UploadId.

VaultName specifies the vault in which the archive was created.

This method returns the ArchiveId which identifies the newly created archive. If you call this method twice for the same multipart upload within a short period of time, the same ArchiveId will be returned.

If parts of the archive were uploaded using separate instances of the class you must first list all parts of the archive by calling ListParts until PartMarker is empty (all parts are returned). Information about the parts is required when completing the multipart upload.

Config Method (CloudStorage_AmazonGlacier Class)

Sets or retrieves a configuration setting.

Object Oriented Interface

public function doConfig($configurationstring);

Procedural Interface

cloudstorage_amazonglacier_do_config($res, $configurationstring);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

CreateJob Method (CloudStorage_AmazonGlacier Class)

Creates a new job.

Object Oriented Interface

public function doCreateJob($vaultname, $jobtype, $archiveid, $snstopic);

Procedural Interface

cloudstorage_amazonglacier_do_createjob($res, $vaultname, $jobtype, $archiveid, $snstopic);

Remarks

This method creates a new job. There are two types of jobs, archive retrieval and inventory retrieval. After the job is created this method will return the JobId. Amazon will then execute the job (which may take hours) and then notify you when it is complete.

VaultName specifies the name of the vault.

JobType specifies the operation. Possible values are:

0Archive Retrieval
1Inventory Retrieval

ArchiveId specifies the archive to retrieve when JobType is set to 0 (archive retrieval).

SNSTopic specifies the SNS topic to which the notification will be posted when the operation is complete.

The GetJobInfo method may be called with the returned JobId to check the status of the job. Once the job is completed use the GetJobOutput method to retrieve the data.

Note: JobDescription may optionally be set. JobRetrievalByteRange may be set when JobType is 0 (archive retrieval). JobInventoryFormat may be set when JobType is set to 1 (inventory retrieval).

CreateVault Method (CloudStorage_AmazonGlacier Class)

Creates a new vault.

Object Oriented Interface

public function doCreateVault($vaultname);

Procedural Interface

cloudstorage_amazonglacier_do_createvault($res, $vaultname);

Remarks

This method creates a new vault with the name specified by the VaultName parameter.

Names can be between 1 and 255 characters long. Allowed characters are a-z, A-Z, 0-9, '_' (underscore), '-' (hyphen), and '.' (period).

The region in which the vault is created is controlled by the Region property.

DeleteArchive Method (CloudStorage_AmazonGlacier Class)

Deletes an archive.

Object Oriented Interface

public function doDeleteArchive($vaultname, $archiveid);

Procedural Interface

cloudstorage_amazonglacier_do_deletearchive($res, $vaultname, $archiveid);

Remarks

This method deletes the archive specified by the ArchiveId parameter.

DeleteNotificationInfo Method (CloudStorage_AmazonGlacier Class)

Deletes the notification information for the vault.

Object Oriented Interface

public function doDeleteNotificationInfo($vaultname);

Procedural Interface

cloudstorage_amazonglacier_do_deletenotificationinfo($res, $vaultname);

Remarks

This method deletes the notification information associated with the vault specified by VaultName.

DeleteVault Method (CloudStorage_AmazonGlacier Class)

Deletes the specified vault.

Object Oriented Interface

public function doDeleteVault($vaultname);

Procedural Interface

cloudstorage_amazonglacier_do_deletevault($res, $vaultname);

Remarks

This method deletes the vault specified by VaultName. If the vault is not empty Amazon will return an error.

Call GetVaultInfo to get information about the archive including the number of archives it contains.

DoEvents Method (CloudStorage_AmazonGlacier Class)

Processes events from the internal message queue.

Object Oriented Interface

public function doEvents();

Procedural Interface

cloudstorage_amazonglacier_do_doevents($res);

Remarks

When DoEvents is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.

GetJobInfo Method (CloudStorage_AmazonGlacier Class)

Retrieves information about the specified job.

Object Oriented Interface

public function doGetJobInfo($vaultname, $jobid);

Procedural Interface

cloudstorage_amazonglacier_do_getjobinfo($res, $vaultname, $jobid);

Remarks

This method retrieves information about the job specified by JobId. The Job* properties will be populated with information about the job.

GetJobOutput Method (CloudStorage_AmazonGlacier Class)

Retrieves the output from the job.

Object Oriented Interface

public function doGetJobOutput($vaultname, $jobid);

Procedural Interface

cloudstorage_amazonglacier_do_getjoboutput($res, $vaultname, $jobid);

Remarks

This method retrieves the output from a completed job. If LocalFile is set, the data will be written to the specified file. If LocalFile is not set the data will be written to either InventoryData or ArchiveData depending on the type of job.

GetNotificationInfo Method (CloudStorage_AmazonGlacier Class)

Retrieves the notification information for the vault.

Object Oriented Interface

public function doGetNotificationInfo($vaultname);

Procedural Interface

cloudstorage_amazonglacier_do_getnotificationinfo($res, $vaultname);

Remarks

This method retrieves the notification information for the vault specified by VaultName. After this method returns, the results will be available in the NotificationInfo* properties.

If no notification settings exist for the vault the class fails with an error.

GetVaultInfo Method (CloudStorage_AmazonGlacier Class)

Retrieves vault details.

Object Oriented Interface

public function doGetVaultInfo($vaultname);

Procedural Interface

cloudstorage_amazonglacier_do_getvaultinfo($res, $vaultname);

Remarks

This method gets information about the vault specified by VaultName. The Vault* properties will be populated with the results. The following properties are populated:

Interrupt Method (CloudStorage_AmazonGlacier Class)

Interrupt the current method.

Object Oriented Interface

public function doInterrupt();

Procedural Interface

cloudstorage_amazonglacier_do_interrupt($res);

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ListJobs Method (CloudStorage_AmazonGlacier Class)

Lists the jobs in a vault.

Object Oriented Interface

public function doListJobs($vaultname);

Procedural Interface

cloudstorage_amazonglacier_do_listjobs($res, $vaultname);

Remarks

This method lists the jobs in the vault specified by VaultName.

The JobList event will fire once for each Job returned. In addition, the Job* properties will be populated.

By default up to 1000 jobs will be returned in a single set of results. The maximum number of results can be specified by setting MaxListJobResults. If the number of results exceeds the maximum the results are paged. The IsJobPaged setting will be set to true and JobMarker will be populated.

To get all results simply call ListJobs again until IsJobPaged returns False and JobMarker is empty string.

Note: The settings JobCompletionFilter and JobStatusFilter may be set to control what type of jobs are returned.

ListMultipartUploads Method (CloudStorage_AmazonGlacier Class)

Lists multipart uploads.

Object Oriented Interface

public function doListMultipartUploads($vaultname);

Procedural Interface

cloudstorage_amazonglacier_do_listmultipartuploads($res, $vaultname);

Remarks

This method lists the current multipart uploads for the vault specified by VaultName. The MultipartUploadList event will fire once for each multipart upload returned. In addition, the MultipartUpload* properties will be populated.

By default up to 1000 multipart uploads will be returned in a single set of results. The maximum number of results can be specified by setting MaxListMultipartUploadResults. If the number of results exceeds the maximum the results are paged. The IsMultipartUploadPaged setting will be set to true and MultipartUploadMarker will be populated.

To get all results simply call ListMultipartUploads again until IsMultipartUploadPaged returns False and MultipartUploadMarker is empty string.

ListParts Method (CloudStorage_AmazonGlacier Class)

Lists the parts of a multipart upload.

Object Oriented Interface

public function doListParts($vaultname, $uploadid);

Procedural Interface

cloudstorage_amazonglacier_do_listparts($res, $vaultname, $uploadid);

Remarks

This method lists the parts of a multipart upload specified by UploadId.

VaultName identifies the vault in which the archive is created.

The PartList event will fire once for each Part returned. In addition, the Parts* properties will be populated.

By default up to 1000 parts will be returned in a single set of results. The maximum number of results can be specified by setting MaxListPartResults. If the number of results exceeds the maximum the results are paged. The IsPartPaged setting will be set to true and PartMarker will be populated.

To get all results simply call ListParts again until IsPartPaged returns False and PartMarker is empty string.

ListVaults Method (CloudStorage_AmazonGlacier Class)

Lists the vaults.

Object Oriented Interface

public function doListVaults();

Procedural Interface

cloudstorage_amazonglacier_do_listvaults($res);

Remarks

This method lists the vaults for an account.

By default up to 1000 vaults will be returned in a single set of results. This maximum number of results can be specified by setting MaxListVaultResults. If the number of results exceeds the maximum the results are paged. The IsVaultPaged setting will be set to true and VaultMarker will be populated.

To get all results simply call ListVaults again until IsVaultPaged returns False and VaultMarker is empty string.

Reset Method (CloudStorage_AmazonGlacier Class)

Resets the class to its initial state.

Object Oriented Interface

public function doReset();

Procedural Interface

cloudstorage_amazonglacier_do_reset($res);

Remarks

This method resets the class to its initial state.

SetNotificationInfo Method (CloudStorage_AmazonGlacier Class)

Sets notification information for a vault.

Object Oriented Interface

public function doSetNotificationInfo($vaultname);

Procedural Interface

cloudstorage_amazonglacier_do_setnotificationinfo($res, $vaultname);

Remarks

This method sets the notification settings for the vault specified by VaultName. The NotifySNSTopic property must be set before calling this method. Optionally, the NotifyEventType may also be set.

StartMultipartUpload Method (CloudStorage_AmazonGlacier Class)

Starts a multipart upload.

Object Oriented Interface

public function doStartMultipartUpload($vaultname, $archivedesc);

Procedural Interface

cloudstorage_amazonglacier_do_startmultipartupload($res, $vaultname, $archivedesc);

Remarks

This method initiates a multipart upload operation. Multipart uploads are beneficial in situations where you wish to upload a large amount of data, or do not know how large the data will be when you begin uploading.

This method returns an UploadId that must be saved. This will be used to perform other operations with this upload.

ArchiveDesc may be set to a user friendly description of the archive, or empty string.

VaultName is the vault in which the archive will be created.

The data must be split into parts with a size (in megabytes) specified by PartSize. The part size must be a megabyte multiplied by a power of 2. For instance 1, 2, 4, and 8 are valid sizes. The minimum part size is 1, the maximum is 4096 (4GB). The default value of PartSize is 1.

Each part must be exactly PartSize megabytes in size except the last part. The last part will be smaller. For instance with a part size of 1, uploading a 10.2 megabyte file will have 11 parts. There will be 10 parts of size 1 MB, and 1 part of size .2 MB.

Parts may be uploaded in parallel by using separate class instances. When uploading a part with UploadPart a part number is specified so the data can be properly re-assembled in order when it reaches the server.

After all parts are uploaded call CompleteMultipartUpload to complete the operation. If parts of the archive were uploaded using separate instances of the class you must first list all parts of the archive by calling ListParts until PartMarker is empty (all parts are returned). Information about the parts is required when completing the multipart upload.

To cancel the operation, call AbortMultipartUpload.

UploadArchive Method (CloudStorage_AmazonGlacier Class)

Uploads an archive to a vault.

Object Oriented Interface

public function doUploadArchive($vaultname, $archivedesc);

Procedural Interface

cloudstorage_amazonglacier_do_uploadarchive($res, $vaultname, $archivedesc);

Remarks

This method uploads an archive to the vault specified by VaultName. If LocalFile is set, the archive data will be read from the specified file. If LocalFile is not set, the data set in ArchiveData will be used.

The ArchiveDesc parameter may be set to a user friendly description of the archive. The description must be less than or equal to 1,024 characters. The allowable characters are 7-bit ASCII without control codes, specifically ASCII values 32-126 decimal or 0x20-0x7E hexadecimal.

This method returns the ArchiveId if the data was successfully uploaded.

UploadPart Method (CloudStorage_AmazonGlacier Class)

Uploads a single part in a multipart upload.

Object Oriented Interface

public function doUploadPart($vaultname, $uploadid, $partnumber);

Procedural Interface

cloudstorage_amazonglacier_do_uploadpart($res, $vaultname, $uploadid, $partnumber);

Remarks

This method uploads a single part of the multipart upload specified by UploadId.

VaultName is the vault in which the archive is created.

PartNumber identifies this specific part. The first part number is 0. Amazon will re-assemble the archive in the order specified by part numbers.

If LocalFile is set, the part data will be read from the specified file. If LocalFile is not set, the data set in ArchiveData will be used.

EndTransfer Event (CloudStorage_AmazonGlacier Class)

This event fires when a document finishes transferring.

Object Oriented Interface

public function fireEndTransfer($param);

Procedural Interface

cloudstorage_amazonglacier_register_callback($res, 1, array($this, 'fireEndTransfer'));

Parameter List

 'direction'

Remarks

The EndTransfer event is fired when the document text finishes transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Error Event (CloudStorage_AmazonGlacier Class)

Information about errors during data delivery.

Object Oriented Interface

public function fireError($param);

Procedural Interface

cloudstorage_amazonglacier_register_callback($res, 2, array($this, 'fireError'));

Parameter List

 'errorcode'
'description'

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class fails with an error.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Header Event (CloudStorage_AmazonGlacier Class)

This event is fired every time a header line comes in.

Object Oriented Interface

public function fireHeader($param);

Procedural Interface

cloudstorage_amazonglacier_register_callback($res, 3, array($this, 'fireHeader'));

Parameter List

 'field'
'value'

Remarks

The Field parameter contains the name of the HTTP header (which is the same as it is delivered). The Value parameter contains the header contents.

If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).

JobList Event (CloudStorage_AmazonGlacier Class)

Fires once for each job returned when calling ListJobs or GetJobInfo.

Object Oriented Interface

public function fireJobList($param);

Procedural Interface

cloudstorage_amazonglacier_register_callback($res, 4, array($this, 'fireJobList'));

Parameter List

 'jobtype'
'archiveid'
'archivesize'
'archivesha256treehash'
'completed'
'completiondate'
'creationdate'
'description'
'jobid'
'snstopic'
'sha256treehash'
'statuscode'
'statusmessage'
'vaultarn'
'inventorysize'

Remarks

This event fires once for each job returned when calling ListJobs. When calling GetJobInfo this event will fire once since only one job is returned.

JobType indicates the type of job. Possible values are:

0Archive Retrieval
1Inventory Retrieval

ArchiveId is the Id of the archive associated with the job.

ArchiveSize is the size in bytes of the archive.

ArchiveSHA256TreeHash is the SHA256 tree hash of the entire archive for an archive retrieval job.

Completed indicates the status of the job.

CompletionDate is the UTC time that the job completed.

CreationDate is the UTC time that the job was created. This is a string representation of ISO 8601 date format, for example: "2012-03-20T17:03:43.221Z".

Description is the user supplied description. This is specified by the JobDescription setting before calling CreateJob.

JobId is the Amazon assigned Id for the job.

SNSTopic is the Amazon SNS topic that will receive notification about the job status.

SHA256TreeHash is the SHA256 tree hash value for the requested range of an archive. This is only applicable when JobType is 0 (archive retrieval) and a JobRetrievalByteRange is set to a tree-hash aligned range.

StatusCode is the current status of the job. Possible values are:

0 None
1 In Progress
2 Succeeded
3 Failed

StatusMessage is a user friendly description of the status.

VaultArn is the Amazon Resource Name (ARN) of the vault from which the archive retrieval or inventory retrieval was requested.

InventorySize is the size in bytes of the inventory data.

Log Event (CloudStorage_AmazonGlacier Class)

This event fires once for each log message.

Object Oriented Interface

public function fireLog($param);

Procedural Interface

cloudstorage_amazonglacier_register_callback($res, 5, array($this, 'fireLog'));

Parameter List

 'loglevel'
'message'
'logtype'

Remarks

This event fires once for each log message generated by the class. The verbosity is controlled by the LogLevel setting.

LogLevel indicates the level of message. Possible values are as follows:

0 (None) No events are logged.
1 (Info - default) Informational events are logged.
2 (Verbose) Detailed data are logged.
3 (Debug) Debug data are logged.

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

Message is the log entry.

LogType identifies the type of log entry. Possible values are as follows:

  • "Info"
  • "RequestHeaders"
  • "ResponseHeaders"
  • "RequestBody"
  • "ResponseBody"
  • "ProxyRequest"
  • "ProxyResponse"
  • "FirewallRequest"
  • "FirewallResponse"

MultipartUploadList Event (CloudStorage_AmazonGlacier Class)

Fires once for each multipart upload when ListMultipartUploads is called.

Object Oriented Interface

public function fireMultipartUploadList($param);

Procedural Interface

cloudstorage_amazonglacier_register_callback($res, 6, array($this, 'fireMultipartUploadList'));

Parameter List

 'archivedescription'
'creationdate'
'uploadid'
'vaultarn'
'partsize'

Remarks

This event fires for each multipart upload returned when calling ListMultipartUploads.

ArchiveDescription is the archive description (if any).

CreationDate is the UTC time that the multipart upload was started. This is a string representation of ISO 8601 date format. For example: "2012-03-20T17:03:43.221Z".

UploadId is the Id of the multipart upload.

VaultArn is the Amazon Resource Name (ARN) of the Vault in which the archive is created.

PartSize is the part size in bytes. This is specified by the PartSize setting and is used when StartMultipartUpload is called.

PartList Event (CloudStorage_AmazonGlacier Class)

Fires once for each part when calling ListParts.

Object Oriented Interface

public function firePartList($param);

Procedural Interface

cloudstorage_amazonglacier_register_callback($res, 7, array($this, 'firePartList'));

Parameter List

 'archivedescription'
'creationdate'
'uploadid'
'startposition'
'size'
'sha256treehash'
'vaultarn'

Remarks

This event fires once for each part when calling ListParts.

ArchiveDescription is the description of the archive (if any).

CreationDate is the UTC time that the multipart upload was started. This is a string representation of ISO 8601 date format. For example: "2012-03-20T17:03:43.221Z".

UploadId is the Id of the multipart upload associated with this part.

StartPosition is the byte offset in the archive of the current part.

Size is the part size in bytes.

SHA256TreeHash is the SHA256 tree hash value that Amazon calculated for the part.

VaultArn is the Amazon Resource Name (ARN) of the Vault in which the archive is created.

Progress Event (CloudStorage_AmazonGlacier Class)

Fires during an upload or download to indicate transfer progress.

Object Oriented Interface

public function fireProgress($param);

Procedural Interface

cloudstorage_amazonglacier_register_callback($res, 8, array($this, 'fireProgress'));

Parameter List

 'direction'
'bytestransferred'
'totalbytes'
'percentdone'

Remarks

This event fires during an upload or download to indicate the progress of the transfer of the entire request. By default, this event will fire each time PercentDone increases by one percent; the ProgressStep configuration setting can be used to alter this behavior.

Direction indicates whether the transfer is an upload (0) or a download (1).

BytesTransferred reflects the number of bytes that have been transferred so far, or 0 if the transfer is starting (however, see note below).

TotalBytes reflects the total number of bytes that are to be transferred, or -1 if the total is unknown. This amount includes the size of everything in the request like HTTP headers.

PercentDone reflects the overall progress of the transfer, or -1 if the progress cannot be calculated.

Note: By default, the class tracks transfer progress absolutely. If a transfer is interrupted and later resumed, the values reported by this event upon and after resumption will account for the data that was transferred before the interruption.

For example, if 10MB of data was successfully transferred before the interruption, then this event will fire with a BytesTransferred value of 10485760 (10MB) when the transfer is first resumed, and then continue to fire with successively greater values as usual.

This behavior can be changed by disabling the ProgressAbsolute configuration setting, in which case the class will treat resumed transfers as "new" transfers. In this case, the BytesTransferred parameter will always be 0 the first time this event fires, regardless of whether the transfer is new or being resumed.

SSLServerAuthentication Event (CloudStorage_AmazonGlacier Class)

Fired after the server presents its certificate to the client.

Object Oriented Interface

public function fireSSLServerAuthentication($param);

Procedural Interface

cloudstorage_amazonglacier_register_callback($res, 9, array($this, 'fireSSLServerAuthentication'));

Parameter List

 'certencoded'
'certsubject'
'certissuer'
'status'
'accept'

Remarks

This event is where the client can decide whether to continue with the connection process or not. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether to continue or not.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string "OK"). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (CloudStorage_AmazonGlacier Class)

Shows the progress of the secure connection.

Object Oriented Interface

public function fireSSLStatus($param);

Procedural Interface

cloudstorage_amazonglacier_register_callback($res, 10, array($this, 'fireSSLStatus'));

Parameter List

 'message'

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

StartTransfer Event (CloudStorage_AmazonGlacier Class)

This event fires when a document starts transferring (after the headers).

Object Oriented Interface

public function fireStartTransfer($param);

Procedural Interface

cloudstorage_amazonglacier_register_callback($res, 11, array($this, 'fireStartTransfer'));

Parameter List

 'direction'

Remarks

The StartTransfer event is fired when the document text starts transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Transfer Event (CloudStorage_AmazonGlacier Class)

This event is fired while a document transfers (delivers document).

Object Oriented Interface

public function fireTransfer($param);

Procedural Interface

cloudstorage_amazonglacier_register_callback($res, 12, array($this, 'fireTransfer'));

Parameter List

 'direction'
'bytestransferred'
'percentdone'
'text'

Remarks

The Text parameter contains the portion of the document text being received. It is empty if data are being posted to the server.

The BytesTransferred parameter contains the number of bytes transferred in this Direction since the beginning of the document text (excluding HTTP response headers).

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

VaultList Event (CloudStorage_AmazonGlacier Class)

Fires once for each vault returned when calling ListVaults.

Object Oriented Interface

public function fireVaultList($param);

Procedural Interface

cloudstorage_amazonglacier_register_callback($res, 13, array($this, 'fireVaultList'));

Parameter List

 'creationdate'
'lastinventorydate'
'vaultarn'
'vaultname'
'archivecount'
'size'

Remarks

This event fires once for each vault returned when calling ListVaults.

CreationDate is the date the vault was created, in Coordinated Universal Time (UTC). This is a string representation of ISO 8601 date format, for example: 2012-03-20T17:03:43.221Z.

LastInventoryDate is the date of the last vault inventory, in Coordinated Universal Time (UTC). This is a string representation of ISO 8601 date format, for example: 2012-03-20T17:03:43.221Z.

VaultArn is the Amazon Resource Name (ARN) of the vault.

VaultName is the name of the vault.

ArchiveCount is the number of archives in the vault as of LastInventoryDate.

Size is the size of all the archives (including any per-archive overhead) in the vault, as of the last inventory date.

Config Settings (AmazonGlacier Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

AmazonGlacier Config Settings

AccumulatePages:   Whether the class should accumulate subsequent pages of results when listing them.

This setting controls how the class behaves when listing multiple pages of results. If this setting is enabled, each successive page of results will be appended to the appropriate collection properties until the last page of results has been listed (at which point the next list call will cause said collection to be cleared first). If this setting is disabled, the collection will be cleared every time a page of results is returned.

By default, this setting is enabled, allowing all pages of results to be accumulated in the appropriate collection properties.

EncryptionIV:   The initialization vector to be used for encryption/decryption.

When encrypting or decrypting a file, this setting may be set to specify the initialization vector. Normally the class will derive this value automatically from EncryptionPassword.

This setting accepts a hex encoded value.

EncryptionKey:   The key to use during encryption/decryption.

When encrypting or decrypting a file, this setting may be set to specify the key to use. Normally the class will derive this value automatically from EncryptionPassword.

This setting accepts a hex encoded value.

EncryptionPasswordKDF:   The KDF algorithm to use during password based encryption and decryption.

This setting specified the Key Derivation Function (KDF) used to derive a key from the specified EncryptionPassword. Possible values are:

  • 0 (default) - PBKDF1
  • 1 - PBKDF2
Note: PBKDF1 is not FIPS compliant. When operating in FIPS mode PBKDF2 should be used.

IsJobPaged:   Whether or not the ListJobs results are paged.

This setting is populated after calling ListJobs and returns true if the results are paged, false otherwise.

IsMultipartUploadPaged:   Whether or not the ListMultipartUploads results are paged.

This setting is populated after calling ListMultipartUploads and returns true if the results are paged, false otherwise.

IsPartPaged:   Whether or not the ListParts results are paged.

This setting is populated after calling ListParts and returns true if the results are paged, false otherwise.

IsVaultPaged:   Whether or not the ListVaults results are paged.

This setting is populated after calling ListVaults and returns true if the results are paged, false otherwise.

JobCompletionFilter:   Specifies the state of jobs to return when calling ListJobs.

This setting specifies whether completed jobs, incomplete jobs, or both are returned when calling ListJobs. Possible values are:

0 (default)Both
1 Completed
2 Incomplete
JobDescription:   The description for the job.

This is an optional setting that can be used to specify a friendly description for the job. The description must be less than or equal to 1,024 bytes. The allowable characters are 7-bit ASCII without control codes, specifically, ASCII values 32-126 decimal or 0x20-0x7E hexadecimal.

JobInventoryFormat:   The format of data returned from an inventory retrieval.

This setting controls the format of the data returned when retrieving the inventory of a vault. It is applicable when calling the CreateJob method. Possible values are:

0 (default)JSON
1 CSV
JobOutputByteRange:   The byte range to retrieve.

This setting specifies the byte range to retrieve when calling GetJobOutput. If unspecified the entire output is retrieved. Values should be in the format "start-end". For instance if you want to download the first 1,048,576 bytes set this to "0-1048575".

JobRetrievalByteRange:   A range of bytes to retrieve.

This may be set to request only a specific range of bytes when retrieving an archive. The byte range to retrieve for an archive retrieval in the form "StartByteValue-EndByteValue". If not specified, the whole archive is retrieved. If specified, the byte range must be megabyte (1024*1024) aligned, which means that StartByteValue must be divisible by 1 MB, and the EndByteValue plus 1 must be divisible by 1 MB or be the end of the archive specified as the archive byte size value minus 1. If RetrievalByteRange is not megabyte aligned, this operation returns a 400 response.

JobStatusFilter:   Specifies the status of jobs to return when calling ListJobs.

This setting specifies whether failed, succeeded, in progress, or all jobs are returned when calling ListJobs. Possible values are:

0 (default)All
1 In Progress
2 Succeeded
3 Failed
LocationURI:   The relative URI of the resource.

This setting holds the relative URI of the resource returned by Amazon after a call to CreateVault, UploadArchive, CreateJob, StartMultipartUpload, and CompleteMultipartUpload. For instance: "/111122223333/vaults/examplevault". In most cases you will not need to use this value.

MaxListJobResults:   The maximum number of Jobs to return.

This setting is used when calling ListJobs to limit the number of results. The default value is 1000.

MaxListMultipartUploadResults:   The maximum number of Multipart Uploads to return.

This setting is used when calling ListMultipartUploads to limit the number of results. The default value is 1000.

MaxListPartResults:   The maximum number of Parts to return.

This setting is used when calling ListParts to limit the number of results. The default value is 1000.

MaxListVaultResults:   The maximum number of Vaults to return.

This setting is used when calling ListVaults to limit the number of results. The default value is 1000.

PartSize:   The size in megabytes of each part in a multipart upload.

This setting specifies the size in megabytes of the parts in a multipart upload. This value is used when calling StartMultipartUpload. The part size must be a megabyte multiplied by a power of 2. For instance 1, 2, 4, and 8 are valid sizes. The minimum part size is 1, the maximum is 4096 (4GB). The default value is 1.

ProgressAbsolute:   Whether the class should track transfer progress absolutely.

This setting controls whether the class tracks upload and download progress absolutely or relatively, with regards to the values reported via the Progress event when an interrupted transfer is resumed.

If this setting is enabled (default), then when a transfer is interrupted and later resumed, the values reported by the Progress event will account for the data that was successfully transferred before the interruption.

If this setting is disabled, then the class will treat resumed transfers as "new" transfers, and the values reported by the Progress event will start at 0 rather than from the number of bytes already transferred.

Refer to the Progress event for more information.

ProgressStep:   How often the progress event should be fired, in terms of percentage.

This setting controls how often the class will fire the Progress event during an upload or download, in terms of percentage. Valid values are 0 to 99, inclusive.

The default value, 1, will cause the Progress event to fire each time the event's PercentDone parameter value increases by one percent. Setting this setting to 0 will cause the Progress event to fire every time data is transferred.

Note that the Progress event will always fire once at the beginning and end of a transfer, regardless of this setting's value. Also, if PercentDone cannot be calculated for a particular transfer (e.g., for downloads that use chunked transfer encoding), then the class will behave as if this setting were 0 for the duration of the transfer.

RequestId:   The Amazon generated RequestId.

A value created by Amazon that uniquely identifies your request. This may be used when contacting Amazon about a problem to help troubleshoot. Amazon recommends that you log this value.

TransferredData:   Returns the entire XML response received from the server.

URL:   If set, the default URL will be overridden by this value.

By default, the class uses the service's URL. Setting this config will override this value.

HTTP Config Settings

AcceptEncoding:   Used to tell the server which types of content encodings the client supports.

When AllowHTTPCompression is True, the class adds an Accept-Encoding header to the request being sent to the server. By default, this header's value is "gzip, deflate". This configuration setting allows you to change the value of the Accept-Encoding header. Note: The class only supports gzip and deflate decompression algorithms.

AllowHTTPCompression:   This property enables HTTP compression for receiving data.

This configuration setting enables HTTP compression for receiving data. When set to True (default), the class will accept compressed data. It then will uncompress the data it has received. The class will handle data compressed by both gzip and deflate compression algorithms.

When True, the class adds an Accept-Encoding header to the outgoing request. The value for this header can be controlled by the AcceptEncoding configuration setting. The default value for this header is "gzip, deflate".

The default value is True.

AllowHTTPFallback:   Whether HTTP/2 connections are permitted to fallback to HTTP/1.1.

This configuration setting controls whether HTTP/2 connections are permitted to fall back to HTTP/1.1 when the server does not support HTTP/2. This setting is applicable only when HTTPVersion is set to "2.0".

If set to True (default), the class will automatically use HTTP/1.1 if the server does not support HTTP/2. If set to False, the class fails with an error if the server does not support HTTP/2.

The default value is True.

Append:   Whether to append data to LocalFile.

This configuration setting determines whether data will be appended when writing to LocalFile. When set to True, downloaded data will be appended to LocalFile. This may be used in conjunction with Range to resume a failed download. This is applicable only when LocalFile is set. The default value is False.

Authorization:   The Authorization string to be sent to the server.

If the Authorization property contains a nonempty string, an Authorization HTTP request header is added to the request. This header conveys Authorization information to the server.

This property is provided so that the HTTP class can be extended with other security schemes in addition to the authorization schemes already implemented by the class.

The AuthScheme property defines the authentication scheme used. In the case of HTTP Basic Authentication (default), every time User and Password are set, they are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]".

BytesTransferred:   Contains the number of bytes transferred in the response data.

This configuration setting returns the raw number of bytes from the HTTP response data, before the component processes the data, whether it is chunked or compressed. This returns the same value as the Transfer event, by BytesTransferred.

ChunkSize:   Specifies the chunk size in bytes when using chunked encoding.

This is applicable only when UseChunkedEncoding is True. This setting specifies the chunk size in bytes to be used when posting data. The default value is 16384.

CompressHTTPRequest:   Set to true to compress the body of a PUT or POST request.

If set to True, the body of a PUT or POST request will be compressed into gzip format before sending the request. The "Content-Encoding" header is also added to the outgoing request.

The default value is False.

EncodeURL:   If set to True the URL will be encoded by the class.

If set to True, the URL passed to the class will be URL encoded. The default value is False.

FollowRedirects:   Determines what happens when the server issues a redirect.

This option determines what happens when the server issues a redirect. Normally, the class returns an error if the server responds with an "Object Moved" message. If this property is set to 1 (always), the new URL for the object is retrieved automatically every time.

If this property is set to 2 (Same Scheme), the new URL is retrieved automatically only if the URL Scheme is the same; otherwise, the class fails with an error.

Note: Following the HTTP specification, unless this option is set to 1 (Always), automatic redirects will be performed only for GET or HEAD requests. Other methods potentially could change the conditions of the initial request and create security vulnerabilities.

Furthermore, if either the new URL server or port are different from the existing one, User and Password are also reset to empty, unless this property is set to 1 (Always), in which case the same credentials are used to connect to the new server.

A Redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the Redirect event is a good place to set properties related to the new connection (e.g., new authentication parameters).

The default value is 0 (Never). In this case, redirects are never followed, and the class fails with an error instead.

Following are the valid options:

  • 0 - Never
  • 1 - Always
  • 2 - Same Scheme

GetOn302Redirect:   If set to True the class will perform a GET on the new location.

The default value is False. If set to True, the class will perform a GET on the new location. Otherwise, it will use the same HTTP method again.

HTTP2HeadersWithoutIndexing:   HTTP2 headers that should not update the dynamic header table with incremental indexing.

HTTP/2 servers maintain a dynamic table of headers and values seen over the course of a connection. Typically, these headers are inserted into the table through incremental indexing (also known as HPACK, defined in RFC 7541). To tell the component not to use incremental indexing for certain headers, and thus not update the dynamic table, set this configuration option to a comma-delimited list of the header names.

HTTPVersion:   The version of HTTP used by the class.

This property specifies the HTTP version used by the class. Possible values are as follows:

  • "1.0"
  • "1.1" (default)
  • "2.0"
  • "3.0"

When using HTTP/2 ("2.0"), additional restrictions apply. Please see the following notes for details.

HTTP/2 Notes

When using HTTP/2, a secure Secure Sockets Layer/Transport Layer Security (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/2 will result in an error.

If the server does not support HTTP/2, the class will automatically use HTTP/1.1 instead. This is done to provide compatibility without the need for any additional settings. To see which version was used, check NegotiatedHTTPVersion after calling a method. The AllowHTTPFallback setting controls whether this behavior is allowed (default) or disallowed.

HTTP/3 Notes

HTTP/3 is supported only in .NET and Java.

When using HTTP/3, a secure (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/3 will result in an error.

IfModifiedSince:   A date determining the maximum age of the desired document.

If this setting contains a nonempty string, an If-Modified-Since HTTP header is added to the request. The value of this header is used to make the HTTP request conditional: if the requested documented has not been modified since the time specified in the field, a copy of the document will not be returned from the server; instead, a 304 (not modified) response will be returned by the server and the component throws an exception

The format of the date value for IfModifiedSince is detailed in the HTTP specs. For example: Sat, 29 Oct 2017 19:43:31 GMT.

KeepAlive:   Determines whether the HTTP connection is closed after completion of the request.

If true, the component will not send the Connection: Close header. The absence of the Connection header indicates to the server that HTTP persistent connections should be used if supported. Note: Not all servers support persistent connections. If false, the connection will be closed immediately after the server response is received.

The default value for KeepAlive is false.

KerberosSPN:   The Service Principal Name for the Kerberos Domain Controller.

If the Service Principal Name on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, the Service Principal Name should be set here.

LogLevel:   The level of detail that is logged.

This configuration setting controls the level of detail that is logged through the Log event. Possible values are as follows:

0 (None) No events are logged.
1 (Info - default) Informational events are logged.
2 (Verbose) Detailed data are logged.
3 (Debug) Debug data are logged.

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

MaxRedirectAttempts:   Limits the number of redirects that are followed in a request.

When FollowRedirects is set to any value other than frNever, the class will follow redirects until this maximum number of redirect attempts are made. The default value is 20.

NegotiatedHTTPVersion:   The negotiated HTTP version.

This configuration setting may be queried after the request is complete to indicate the HTTP version used. When HTTPVersion is set to "2.0" (if the server does not support "2.0"), then the class will fall back to using "1.1" automatically. This setting will indicate which version was used.

OtherHeaders:   Other headers as determined by the user (optional).

This configuration setting can be set to a string of headers to be appended to the HTTP request headers.

The headers must follow the format "header: value" as described in the HTTP specifications. Header lines should be separated by CRLF ("\r\n") .

Use this configuration setting with caution. If this configuration setting contains invalid headers, HTTP requests may fail.

This configuration setting is useful for extending the functionality of the class beyond what is provided.

ProxyAuthorization:   The authorization string to be sent to the proxy server.

This is similar to the Authorization configuration setting, but is used for proxy authorization. If this configuration setting contains a nonempty string, a Proxy-Authorization HTTP request header is added to the request. This header conveys proxy Authorization information to the server. If ProxyUser and ProxyPassword are specified, this value is calculated using the algorithm specified by ProxyAuthScheme.

ProxyAuthScheme:   The authorization scheme to be used for the proxy.

This configuration setting is provided for use by classs that do not directly expose Proxy properties.

ProxyPassword:   A password if authentication is to be used for the proxy.

This configuration setting is provided for use by classs that do not directly expose Proxy properties.

ProxyPort:   Port for the proxy server (default 80).

This configuration setting is provided for use by classs that do not directly expose Proxy properties.

ProxyServer:   Name or IP address of a proxy server (optional).

This configuration setting is provided for use by classs that do not directly expose Proxy properties.

ProxyUser:   A user name if authentication is to be used for the proxy.

This configuration setting is provided for use by classs that do not directly expose Proxy properties.

SentHeaders:   The full set of headers as sent by the client.

This configuration setting returns the complete set of raw headers as sent by the client.

StatusCode:   The status code of the last response from the server.

This configuration setting contains the result code of the last response from the server.

StatusLine:   The first line of the last response from the server.

This setting contains the first line of the last response from the server. The format of the line will be [HTTP version] [Result Code] [Description].

TransferredData:   The contents of the last response from the server.

This configuration setting contains the contents of the last response from the server.

TransferredDataLimit:   The maximum number of incoming bytes to be stored by the class.

If TransferredDataLimit is set to 0 (default), no limits are imposed. Otherwise, this reflects the maximum number of incoming bytes that can be stored by the class.

TransferredHeaders:   The full set of headers as received from the server.

This configuration setting returns the complete set of raw headers as received from the server.

TransferredRequest:   The full request as sent by the client.

This configuration setting returns the full request as sent by the client. For performance reasons, the request is not normally saved. Set this configuration setting to ON before making a request to enable it. Following are examples of this request:

.NET Http http = new Http(); http.Config("TransferredRequest=on"); http.PostData = "body"; http.Post("http://someserver.com"); Console.WriteLine(http.Config("TransferredRequest")); C++ HTTP http; http.Config("TransferredRequest=on"); http.SetPostData("body", 5); http.Post("http://someserver.com"); printf("%s\r\n", http.Config("TransferredRequest"));

UseChunkedEncoding:   Enables or Disables HTTP chunked encoding for transfers.

If UseChunkedEncoding is set to True, the class will use HTTP-chunked encoding when posting, if possible. HTTP-chunked encoding allows large files to be sent in chunks instead of all at once. If set to False, the class will not use HTTP-chunked encoding. The default value is False.

Note: Some servers (such as the ASP.NET Development Server) may not support chunked encoding.

UseIDNs:   Whether to encode hostnames to internationalized domain names.

This configuration setting specifies whether hostnames containing non-ASCII characters are encoded to internationalized domain names. When set to True, if a hostname contains non-ASCII characters, it is encoded using Punycode to an IDN (internationalized domain name).

The default value is False and the hostname will always be used exactly as specified. Note: The CodePage setting must be set to a value capable of interpreting the specified host name. For instance, to specify UTF-8, set CodePage to 65001. In the C++ Edition for Windows, the *W version of the class must be used. For instance, DNSW or HTTPW.

UsePlatformHTTPClient:   Whether or not to use the platform HTTP client.

When using this configuration setting, if True, the component will use the default HTTP client for the platform (URLConnection in Java, WebRequest in .NET, or CFHTTPMessage in Mac/iOS) instead of the internal HTTP implementation. This is important for environments in which direct access to sockets is limited or not allowed (e.g., in the Google AppEngine).

Note: This setting is applicable only to Mac/iOS editions.

UseProxyAutoConfigURL:   Whether to use a Proxy auto-config file when attempting a connection.

This configuration specifies whether the class will attempt to use the Proxy auto-config URL when establishing a connection and ProxyAutoDetect is set to True.

When True (default), the class will check for the existence of a Proxy auto-config URL, and if found, will determine the appropriate proxy to use.

UserAgent:   Information about the user agent (browser).

This is the value supplied in the HTTP User-Agent header. The default setting is "IPWorks HTTP Component - www.nsoftware.com".

Override the default with the name and version of your software.

TCPClient Config Settings

ConnectionTimeout:   Sets a separate timeout value for establishing a connection.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the class will use Timeout for establishing a connection and transmitting/receiving data.

FirewallAutoDetect:   Tells the class whether or not to automatically detect and use firewall system settings, if available.

This configuration setting is provided for use by classs that do not directly expose Firewall properties.

FirewallHost:   Name or IP address of firewall (optional).

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallPassword:   Password to be used if authentication is to be used when connecting through the firewall.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the class fails with an error.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallPort:   The TCP port for the FirewallHost;.

The FirewallPort is set automatically when FirewallType is set to a valid value.

Note: This configuration setting is provided for use by classs that do not directly expose Firewall properties.

FirewallType:   Determines the type of firewall to connect through.

The appropriate values are as follows:

0No firewall (default setting).
1Connect through a tunneling proxy. FirewallPort is set to 80.
2Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
3Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
10Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallUser:   A user name if authentication is to be used connecting through a firewall.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the class fails with an error.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

KeepAliveInterval:   The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

When set, TCPKeepAlive will automatically be set to True. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in macOS.

KeepAliveTime:   The inactivity time in milliseconds before a TCP keep-alive packet is sent.

When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Linger:   When set to True, connections are terminated gracefully.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.

In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the class returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.

LingerTime:   Time in seconds to have the connection linger.

LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout.

LocalHost:   The name of the local host through which connections are initiated or accepted.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

LocalPort:   The port in the local host where the class binds.

This must be set before a connection is attempted. It instructs the class to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength:   The maximum amount of data to accumulate when no EOL is found.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.

MaxTransferRate:   The transfer rate limit in bytes per second.

This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit.

ProxyExceptionsList:   A semicolon separated list of hosts and IPs to bypass when using a proxy.

This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use. When requests are made to hosts specified in this property, the proxy will not be used. For instance:

www.google.com;www.nsoftware.com

TCPKeepAlive:   Determines whether or not the keep alive socket option is enabled.

If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

TcpNoDelay:   Whether or not to delay when sending packets.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

UseIPv6:   Whether to use IPv6.

When set to 0 (default), the class will use IPv4 exclusively. When set to 1, the class will use IPv6 exclusively. To instruct the class to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are:

0 IPv4 Only
1 IPv6 Only
2 IPv6 with IPv4 fallback

SSL Config Settings

LogSSLPackets:   Controls whether SSL packets are logged when using the internal security API.

When SSLProvider is set to Internal, this setting controls whether SSL packets should be logged. By default, this setting is False, as it is only useful for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this setting has no effect if SSLProvider is set to Platform.

OpenSSLCADir:   The path to a directory containing CA certificates.

This functionality is available only when the provider is OpenSSL.

The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g. 9d66eef0.0, 9d66eef0.1 etc). OpenSSL recommends to use the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCAFile:   Name of the file containing the list of CA's trusted by your application.

This functionality is available only when the provider is OpenSSL.

The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by

-----BEGIN CERTIFICATE-----

... (CA certificate in base64 encoding) ...

-----END CERTIFICATE-----

sequences. Before, between, and after the certificates text is allowed which can be used e.g. for descriptions of the certificates. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCipherList:   A string that controls the ciphers to be used by SSL.

This functionality is available only when the provider is OpenSSL.

The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".

OpenSSLPrngSeedData:   The data to seed the pseudo random number generator (PRNG).

This functionality is available only when the provider is OpenSSL.

By default OpenSSL uses the device file "/dev/urandom" to seed the PRNG and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.

ReuseSSLSession:   Determines if the SSL session is reused.

If set to true, the class will reuse the context if and only if the following criteria are met:

  • The target host name is the same.
  • The system cache entry has not expired (default timeout is 10 hours).
  • The application process that calls the function is the same.
  • The logon session is the same.
  • The instance of the class is the same.

SSLCACertFilePaths:   The paths to CA certificate files on Unix/Linux.

This setting specifies the paths on disk to CA certificate files on Unix/Linux.

The value is formatted as a list of paths separated by semicolons. The class will check for the existence of each file in the order specified. When a file is found the CA certificates within the file will be loaded and used to determine the validity of server or client certificates.

The default value is:

/etc/ssl/ca-bundle.pem;/etc/pki/tls/certs/ca-bundle.crt;/etc/ssl/certs/ca-certificates.crt;/etc/pki/tls/cacert.pem

SSLCACerts:   A newline separated list of CA certificate to use during SSL client authentication.

This setting specifies one or more CA certificates to be included in the request when performing SSL client authentication. Some servers require the entire chain, including CA certificates, to be presented when performing SSL client authentication. The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLCheckCRL:   Whether to check the Certificate Revocation List for the server certificate.

This setting specifies whether the class will check the Certificate Revocation List specified by the server certificate. If set to 1 or 2, the class will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The class will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the class fails with an error.

When set to 0 (default) the CRL check will not be performed by the class. When set to 1, it will attempt to perform the CRL check, but will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

SSLCheckOCSP:   Whether to use OCSP to check the status of the server certificate.

This setting specifies whether the class will use OCSP to check the validity of the server certificate. If set to 1 or 2, the class will first obtain the OCSP URL from the server certificate's OCSP extension. The class will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the class fails with an error.

When set to 0 (default) the class will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

SSLCipherStrength:   The minimum cipher strength used for bulk encryption.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting.

SSLEnabledCipherSuites:   The cipher suite to be used in an SSL negotiation.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the class will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when SSLProvider is set to Platform: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=CALG_AES_256"); obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES"); Possible values when SSLProvider is set to Platform include:

  • CALG_3DES
  • CALG_3DES_112
  • CALG_AES
  • CALG_AES_128
  • CALG_AES_192
  • CALG_AES_256
  • CALG_AGREEDKEY_ANY
  • CALG_CYLINK_MEK
  • CALG_DES
  • CALG_DESX
  • CALG_DH_EPHEM
  • CALG_DH_SF
  • CALG_DSS_SIGN
  • CALG_ECDH
  • CALG_ECDH_EPHEM
  • CALG_ECDSA
  • CALG_ECMQV
  • CALG_HASH_REPLACE_OWF
  • CALG_HUGHES_MD5
  • CALG_HMAC
  • CALG_KEA_KEYX
  • CALG_MAC
  • CALG_MD2
  • CALG_MD4
  • CALG_MD5
  • CALG_NO_SIGN
  • CALG_OID_INFO_CNG_ONLY
  • CALG_OID_INFO_PARAMETERS
  • CALG_PCT1_MASTER
  • CALG_RC2
  • CALG_RC4
  • CALG_RC5
  • CALG_RSA_KEYX
  • CALG_RSA_SIGN
  • CALG_SCHANNEL_ENC_KEY
  • CALG_SCHANNEL_MAC_KEY
  • CALG_SCHANNEL_MASTER_HASH
  • CALG_SEAL
  • CALG_SHA
  • CALG_SHA1
  • CALG_SHA_256
  • CALG_SHA_384
  • CALG_SHA_512
  • CALG_SKIPJACK
  • CALG_SSL2_MASTER
  • CALG_SSL3_MASTER
  • CALG_SSL3_SHAMD5
  • CALG_TEK
  • CALG_TLS1_MASTER
  • CALG_TLS1PRF
Example values when SSLProvider is set to Internal: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA"); obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_DH_ANON_WITH_AES_128_CBC_SHA"); Possible values when SSLProvider is set to Internal include:
  • TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
  • TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
  • TLS_DH_RSA_WITH_AES_128_GCM_SHA256 (Not Recommended)
  • TLS_DH_RSA_WITH_AES_256_GCM_SHA384 (Not Recommended)
  • TLS_DH_DSS_WITH_AES_128_GCM_SHA256 (Not Recommended)
  • TLS_DH_DSS_WITH_AES_256_GCM_SHA384 (Not Recommended)
  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
  • TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_DES_CBC_SHA
  • TLS_DHE_RSA_WITH_DES_CBC_SHA
  • TLS_DHE_DSS_WITH_DES_CBC_SHA
  • TLS_RSA_WITH_RC4_128_MD5
  • TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols) only the following cipher suites are supported:

  • TLS_AES_256_GCM_SHA384
  • TLS_CHACHA20_POLY1305_SHA256
  • TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols:   Used to enable/disable the supported security protocols.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:

TLS1.312288 (Hex 3000)
TLS1.23072 (Hex C00) (Default)
TLS1.1768 (Hex 300) (Default)
TLS1 192 (Hex C0) (Default)
SSL3 48 (Hex 30)
SSL2 12 (Hex 0C)

SSLEnabledProtocols - TLS 1.3 Notes

By default when TLS 1.3 is enabled the class will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions.

In editions which are designed to run on Windows SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is only supported on Windows 11 / Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.

If set to 1 (Platform provider) please be aware of the following notes:

  • The platform provider is only available on Windows 11 / Windows Server 2022 and up.
  • SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
  • If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2 the above restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.

SSLEnableRenegotiation:   Whether the renegotiation_info SSL extension is supported.

This setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This setting is true by default, but can be set to false to disable the extension.

This setting is only applicable when SSLProvider is set to Internal.

SSLIncludeCertChain:   Whether the entire certificate chain is included in the SSLServerAuthentication event.

This setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

SSLKeyLogFile:   The location of a file where per-session secrets are written for debugging purposes.

This setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the class will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffice for debugging purposes. When writing to this file the class will only append, it will not overwrite previous values.

Note: This setting is only applicable when SSLProvider is set to Internal.

SSLNegotiatedCipher:   Returns the negotiated cipher suite.

Returns the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

SSLNegotiatedCipherStrength:   Returns the negotiated cipher suite strength.

Returns the strength of the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g.TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

SSLNegotiatedCipherSuite:   Returns the negotiated cipher suite.

Returns the cipher suite negotiated during the SSL handshake represented as a single string.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherSuite[connId]");

SSLNegotiatedKeyExchange:   Returns the negotiated key exchange algorithm.

Returns the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchange[connId]");

SSLNegotiatedKeyExchangeStrength:   Returns the negotiated key exchange algorithm strength.

Returns the strenghth of the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchangeStrength[connId]");

SSLNegotiatedVersion:   Returns the negotiated protocol version.

Returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

SSLSecurityFlags:   Flags that control certificate verification.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:

0x00000001Ignore time validity status of certificate.
0x00000002Ignore time validity status of CTL.
0x00000004Ignore non-nested certificate times.
0x00000010Allow unknown Certificate Authority.
0x00000020Ignore wrong certificate usage.
0x00000100Ignore unknown certificate revocation status.
0x00000200Ignore unknown CTL signer revocation status.
0x00000400Ignore unknown Certificate Authority revocation status.
0x00000800Ignore unknown Root revocation status.
0x00008000Allow test Root certificate.
0x00004000Trust test Root certificate.
0x80000000Ignore non-matching CN (certificate CN not-matching server name).

This functionality is currently not available when the provider is OpenSSL.

SSLServerCACerts:   A newline separated list of CA certificate to use during SSL server certificate validation.

This setting optionally specifies one or more CA certificates to be used when verifying the server certificate. When verifying the server's certificate the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This setting should only be set if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

TLS12SignatureAlgorithms:   Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.

This setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the class will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the class fails with an error.

The format of this value is a comma separated list of hash-signature combinations. For instance: component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups:   The supported groups for ECC.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)

TLS13KeyShareGroups:   The groups for which to pregenerate key shares.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448"
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1"
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096"
  • "ffdhe_6144"
  • "ffdhe_8192"

TLS13SignatureAlgorithms:   The allowed certificate signature algorithms.

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

  • "ed25519" (default)
  • "ed448" (default)
  • "ecdsa_secp256r1_sha256" (default)
  • "ecdsa_secp384r1_sha384" (default)
  • "ecdsa_secp521r1_sha512" (default)
  • "rsa_pkcs1_sha256" (default)
  • "rsa_pkcs1_sha384" (default)
  • "rsa_pkcs1_sha512" (default)
  • "rsa_pss_sha256" (default)
  • "rsa_pss_sha384" (default)
  • "rsa_pss_sha512" (default)
The default value is rsa_pss_sha256,rsa_pss_sha384,rsa_pss_sha512,rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512,ecdsa_secp256r1_sha256,ecdsa_secp384r1_sha384,ecdsa_secp521r1_sha512,ed25519,ed448. This setting is only applicable when SSLEnabledProtocols includes TLS 1.3.
TLS13SupportedGroups:   The supported groups for (EC)DHE key exchange.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448" (default)
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096" (default)
  • "ffdhe_6144" (default)
  • "ffdhe_8192" (default)

Socket Config Settings

AbsoluteTimeout:   Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for UDP ports.

FirewallData:   Used to send extra data to the firewall.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes).

InBufferSize:   The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize:   The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

Base Config Settings

BuildInfo:   Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

CodePage:   The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:

IdentifierName
037IBM EBCDIC - U.S./Canada
437OEM - United States
500IBM EBCDIC - International
708Arabic - ASMO 708
709Arabic - ASMO 449+, BCON V4
710Arabic - Transparent Arabic
720Arabic - Transparent ASMO
737OEM - Greek (formerly 437G)
775OEM - Baltic
850OEM - Multilingual Latin I
852OEM - Latin II
855OEM - Cyrillic (primarily Russian)
857OEM - Turkish
858OEM - Multilingual Latin I + Euro symbol
860OEM - Portuguese
861OEM - Icelandic
862OEM - Hebrew
863OEM - Canadian-French
864OEM - Arabic
865OEM - Nordic
866OEM - Russian
869OEM - Modern Greek
870IBM EBCDIC - Multilingual/ROECE (Latin-2)
874ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875IBM EBCDIC - Modern Greek
932ANSI/OEM - Japanese, Shift-JIS
936ANSI/OEM - Simplified Chinese (PRC, Singapore)
949ANSI/OEM - Korean (Unified Hangul Code)
950ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026IBM EBCDIC - Turkish (Latin-5)
1047IBM EBCDIC - Latin 1/Open System
1140IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141IBM EBCDIC - Germany (20273 + Euro symbol)
1142IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144IBM EBCDIC - Italy (20280 + Euro symbol)
1145IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147IBM EBCDIC - France (20297 + Euro symbol)
1148IBM EBCDIC - International (500 + Euro symbol)
1149IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201Unicode UCS-2 Big-Endian
1250ANSI - Central European
1251ANSI - Cyrillic
1252ANSI - Latin I
1253ANSI - Greek
1254ANSI - Turkish
1255ANSI - Hebrew
1256ANSI - Arabic
1257ANSI - Baltic
1258ANSI/OEM - Vietnamese
1361Korean (Johab)
10000MAC - Roman
10001MAC - Japanese
10002MAC - Traditional Chinese (Big5)
10003MAC - Korean
10004MAC - Arabic
10005MAC - Hebrew
10006MAC - Greek I
10007MAC - Cyrillic
10008MAC - Simplified Chinese (GB 2312)
10010MAC - Romania
10017MAC - Ukraine
10021MAC - Thai
10029MAC - Latin II
10079MAC - Icelandic
10081MAC - Turkish
10082MAC - Croatia
12000Unicode UCS-4 Little-Endian
12001Unicode UCS-4 Big-Endian
20000CNS - Taiwan
20001TCA - Taiwan
20002Eten - Taiwan
20003IBM5550 - Taiwan
20004TeleText - Taiwan
20005Wang - Taiwan
20105IA5 IRV International Alphabet No. 5 (7-bit)
20106IA5 German (7-bit)
20107IA5 Swedish (7-bit)
20108IA5 Norwegian (7-bit)
20127US-ASCII (7-bit)
20261T.61
20269ISO 6937 Non-Spacing Accent
20273IBM EBCDIC - Germany
20277IBM EBCDIC - Denmark/Norway
20278IBM EBCDIC - Finland/Sweden
20280IBM EBCDIC - Italy
20284IBM EBCDIC - Latin America/Spain
20285IBM EBCDIC - United Kingdom
20290IBM EBCDIC - Japanese Katakana Extended
20297IBM EBCDIC - France
20420IBM EBCDIC - Arabic
20423IBM EBCDIC - Greek
20424IBM EBCDIC - Hebrew
20833IBM EBCDIC - Korean Extended
20838IBM EBCDIC - Thai
20866Russian - KOI8-R
20871IBM EBCDIC - Icelandic
20880IBM EBCDIC - Cyrillic (Russian)
20905IBM EBCDIC - Turkish
20924IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932JIS X 0208-1990 & 0121-1990
20936Simplified Chinese (GB2312)
21025IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027Extended Alpha Lowercase
21866Ukrainian (KOI8-U)
28591ISO 8859-1 Latin I
28592ISO 8859-2 Central Europe
28593ISO 8859-3 Latin 3
28594ISO 8859-4 Baltic
28595ISO 8859-5 Cyrillic
28596ISO 8859-6 Arabic
28597ISO 8859-7 Greek
28598ISO 8859-8 Hebrew
28599ISO 8859-9 Latin 5
28605ISO 8859-15 Latin 9
29001Europa 3
38598ISO 8859-8 Hebrew
50220ISO 2022 Japanese with no halfwidth Katakana
50221ISO 2022 Japanese with halfwidth Katakana
50222ISO 2022 Japanese JIS X 0201-1989
50225ISO 2022 Korean
50227ISO 2022 Simplified Chinese
50229ISO 2022 Traditional Chinese
50930Japanese (Katakana) Extended
50931US/Canada and Japanese
50933Korean Extended and Korean
50935Simplified Chinese Extended and Simplified Chinese
50936Simplified Chinese
50937US/Canada and Traditional Chinese
50939Japanese (Latin) Extended and Japanese
51932EUC - Japanese
51936EUC - Simplified Chinese
51949EUC - Korean
51950EUC - Traditional Chinese
52936HZ-GB2312 Simplified Chinese
54936Windows XP: GB18030 Simplified Chinese (4 Byte)
57002ISCII Devanagari
57003ISCII Bengali
57004ISCII Tamil
57005ISCII Telugu
57006ISCII Assamese
57007ISCII Oriya
57008ISCII Kannada
57009ISCII Malayalam
57010ISCII Gujarati
57011ISCII Punjabi
65000Unicode UTF-7
65001Unicode UTF-8
The following is a list of valid code page identifiers for Mac OS only:
IdentifierName
1ASCII
2NEXTSTEP
3JapaneseEUC
4UTF8
5ISOLatin1
6Symbol
7NonLossyASCII
8ShiftJIS
9ISOLatin2
10Unicode
11WindowsCP1251
12WindowsCP1252
13WindowsCP1253
14WindowsCP1254
15WindowsCP1250
21ISO2022JP
30MacOSRoman
10UTF16String
0x90000100UTF16BigEndian
0x94000100UTF16LittleEndian
0x8c000100UTF32String
0x98000100UTF32BigEndian
0x9c000100UTF32LittleEndian
65536Proprietary

LicenseInfo:   Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a class is using. It will return the following information:

  • Product: The product the license is for.
  • Product Key: The key the license was generated from.
  • License Source: Where the license was found (e.g., RuntimeLicense, License File).
  • License Type: The type of license installed (e.g., Royalty Free, Single Server).
  • Last Valid Build: The last valid build number for which the license will work.
MaskSensitive:   Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.

This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

ProcessIdleEvents:   Whether the class uses its internal event loop to process events when the main thread is idle.

If set to False, the class will not fire internal idle events. Set this to False to use the class in a background thread on Mac OS. By default, this setting is True.

SelectWaitMillis:   The length of time in milliseconds the class will wait when DoEvents is called if there are no events to process.

If there are no events to process when DoEvents is called, the class will wait for the amount of time specified here before returning. The default value is 20.

UseFIPSCompliantAPI:   Tells the class whether or not to use FIPS certified APIs.

When set to true, the class will utilize the underlying operating system's certified APIs. Java editions, regardless of OS, utilize Bouncy Castle FIPS, while all the other Windows editions make use of Microsoft security libraries.

FIPS mode can be enabled by setting the UseFIPSCompliantAPI configuration setting to true. This is a static setting which applies to all instances of all classes of the toolkit within the process. It is recommended to enable or disable this setting once before the component has been used to establish a connection. Enabling FIPS while an instance of the component is active and connected may result in unexpected behavior.

For more details please see the FIPS 140-2 Compliance article.

Note: This setting is only applicable on Windows.

Note: Enabling FIPS-compliance requires a special license; please contact sales@nsoftware.com for details.

UseInternalSecurityAPI:   Tells the class whether or not to use the system security libraries or an internal implementation.

When set to false, the class will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this setting to true tells the class to use the internal implementation instead of using the system security libraries.

On Windows, this setting is set to false by default. On Linux/macOS, this setting is set to true by default.

To use the system security libraries for Linux, OpenSSL support must be enabled. For more information on how to enable OpenSSL, please refer to the OpenSSL Notes section.

Trappable Errors (AmazonGlacier Class)

Common Errors

600   A server error occurred, and/or the class was unable to process the server's response. Please refer to the error message for more information.
601   An unsupported operation or action was attempted.
602   The RawRequest or RawResponse configuration setting was queried without first setting the TransferredRequest configuration setting to ON.
603   The login credentials specified were invalid. Please refer to the error message for more information.
604   An invalid remote resource identifier (i.e., a name, path, Id, etc.) was specified.
605   An invalid index was specified.
606   An upload was aborted by the user before it could finish.
607   The specified resource is a folder and cannot be downloaded.
608   A download failed because the specified LocalFile already exists and Overwrite is false.
609   The class could not resume a download or upload. Please refer to the error message for more information.
610   An encrypted download could not be resumed because the DownloadTempFile configuration setting is not set.
611   An exception occurred while working with the specified LocalFile (or the current value of LocalFile is invalid). Please refer to the error message for more information.
612   An exception occurred while working with the specified upload or download stream. Please refer to the error message for more information.

The class may also return one of the following error codes, which are inherited from other classes.

HTTP Errors

118   Firewall Error. Error description contains detailed message.
143   Busy executing current method.
151   HTTP protocol error. The error message has the server response.
152   No server specified in URL
153   Specified URLScheme is invalid.
155   Range operation is not supported by server.
156   Invalid cookie index (out of range).
301   Interrupted.
302   Can't open AttachedFile.

The class may also return one of the following error codes, which are inherited from other classes.

TCPClient Errors

100   You cannot change the RemotePort at this time. A connection is in progress.
101   You cannot change the RemoteHost (Server) at this time. A connection is in progress.
102   The RemoteHost address is invalid (0.0.0.0).
104   Already connected. If you want to reconnect, close the current connection first.
106   You cannot change the LocalPort at this time. A connection is in progress.
107   You cannot change the LocalHost at this time. A connection is in progress.
112   You cannot change MaxLineLength at this time. A connection is in progress.
116   RemotePort cannot be zero. Please specify a valid service port number.
117   You cannot change the UseConnection option while the class is active.
135   Operation would block.
201   Timeout.
211   Action impossible in control's present state.
212   Action impossible while not connected.
213   Action impossible while listening.
301   Timeout.
302   Could not open file.
434   Unable to convert string to selected CodePage.
1105   Already connecting. If you want to reconnect, close the current connection first.
1117   You need to connect first.
1119   You cannot change the LocalHost at this time. A connection is in progress.
1120   Connection dropped by remote host.

SSL Errors

270   Cannot load specified security library.
271   Cannot open certificate store.
272   Cannot find specified certificate.
273   Cannot acquire security credentials.
274   Cannot find certificate chain.
275   Cannot verify certificate chain.
276   Error during handshake.
280   Error verifying certificate.
281   Could not find client certificate.
282   Could not find server certificate.
283   Error encrypting data.
284   Error decrypting data.

TCP/IP Errors

10004   [10004] Interrupted system call.
10009   [10009] Bad file number.
10013   [10013] Access denied.
10014   [10014] Bad address.
10022   [10022] Invalid argument.
10024   [10024] Too many open files.
10035   [10035] Operation would block.
10036   [10036] Operation now in progress.
10037   [10037] Operation already in progress.
10038   [10038] Socket operation on non-socket.
10039   [10039] Destination address required.
10040   [10040] Message too long.
10041   [10041] Protocol wrong type for socket.
10042   [10042] Bad protocol option.
10043   [10043] Protocol not supported.
10044   [10044] Socket type not supported.
10045   [10045] Operation not supported on socket.
10046   [10046] Protocol family not supported.
10047   [10047] Address family not supported by protocol family.
10048   [10048] Address already in use.
10049   [10049] Can't assign requested address.
10050   [10050] Network is down.
10051   [10051] Network is unreachable.
10052   [10052] Net dropped connection or reset.
10053   [10053] Software caused connection abort.
10054   [10054] Connection reset by peer.
10055   [10055] No buffer space available.
10056   [10056] Socket is already connected.
10057   [10057] Socket is not connected.
10058   [10058] Can't send after socket shutdown.
10059   [10059] Too many references, can't splice.
10060   [10060] Connection timed out.
10061   [10061] Connection refused.
10062   [10062] Too many levels of symbolic links.
10063   [10063] File name too long.
10064   [10064] Host is down.
10065   [10065] No route to host.
10066   [10066] Directory not empty
10067   [10067] Too many processes.
10068   [10068] Too many users.
10069   [10069] Disc Quota Exceeded.
10070   [10070] Stale NFS file handle.
10071   [10071] Too many levels of remote in path.
10091   [10091] Network subsystem is unavailable.
10092   [10092] WINSOCK DLL Version out of range.
10093   [10093] Winsock not loaded yet.
11001   [11001] Host not found.
11002   [11002] Non-authoritative 'Host not found' (try again or check DNS setup).
11003   [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP.
11004   [11004] Valid name, no data record (check DNS setup).