BackblazeB2 Control

Properties   Methods   Events   Config Settings   Errors  

The BackblazeB2 control offers an easy to use interface for Backblaze's B2 Cloud Storage service.

Syntax

BackblazeB2

Remarks

The BackblazeB2 control provides an easy-to-use API for the Backblaze B2 Cloud Storage service. Capabilities include uploading and downloading files, bucket management, strong encryption support, and more.

Authentication

Authentication works by exchanging a known application key (which consists of a key Id and the key string itself) for an authorization token which is then used to authorize all further requests. The authentication process also returns information about the account, the capabilities and restrictions associated with the application key, and other details that help the control interact with the Backblaze B2 API.

To authenticate the control with the server, supply an application key using the ApplicationKeyId and ApplicationKey properties, and then call Authorize. This will populate the Account property with the aforementioned information, including the AccountAuthToken.

Eventually, the authorization token returned during the authentication process will expire, at which point it should be exchanged for a new one by calling Authorize again.

Usage

Once authenticated, you can start interacting with the Backblaze B2 Cloud Storage service. The following list shows some of the methods used to accomplish common tasks:

• Bucket management: ListBuckets, GetBucketInfo, CreateBucket, UpdateBucket, DeleteBucket
• File management: ListFiles, ListFileVersions, GetFileInfo, UploadFile, CopyFile, DownloadFile, DownloadFileById, HideFile, DeleteFile, DeleteFileVersion
• Multipart uploads: ListMultipartUploads, StartMultipartUpload, CompleteMultipartUpload, AbortMultipartUpload, ListParts, UploadPart, CopyPart
• Application key management: ListAppKeys, CreateAppKey, DeleteAppKey
• Sharing files: GetDownloadAuthToken

Refer to the complete API, below, for more information.

Property List

The following is the full list of the properties of the control with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the control with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the control with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the control with short descriptions. Click on the links for further details.

AccountId Property (BackblazeB2 Control)

The Id of the account.

Syntax

backblazeb2control.AccountId

Default Value

""

Remarks

The Id of the account.

This property reflects the Id of the account that the currently-authenticated application key belongs to.

This property is read-only and not available at design time.

Data Type

String

AccountAllowedBucketId Property (BackblazeB2 Control)

The Id of the bucket that the application key is restricted to.

Syntax

backblazeb2control.AccountAllowedBucketId

Default Value

""

Remarks

The Id of the bucket that the application key is restricted to.

This property reflects the Id of the bucket that the currently-authenticated application key is restricted to. It will be empty if the currently-authenticated application key is not restricted to any specific bucket.

This property is read-only and not available at design time.

Data Type

String

AccountAllowedBucketName Property (BackblazeB2 Control)

The name of the bucket that the application key is restricted to.

Syntax

backblazeb2control.AccountAllowedBucketName

Default Value

""

Remarks

The name of the bucket that the application key is restricted to.

This property reflects the name of the bucket that the currently-authenticated application key is restricted to. It will be empty if the currently-authenticated application key is not restricted to any specific bucket; or if it is, but the bucket has been deleted (AccountAllowedBucketId will still be populated in this case).

This property is read-only and not available at design time.

Data Type

String

AccountAllowedPrefix Property (BackblazeB2 Control)

The file name prefix that the application key is restricted to.

Syntax

backblazeb2control.AccountAllowedPrefix

Default Value

""

Remarks

The file name prefix that the application key is restricted to.

This property reflects the file name prefix that the currently-authenticated application key is restricted to. It will be empty if the currently-authenticated application key is not restricted to a specific file name prefix.

This property is read-only and not available at design time.

Data Type

String

AccountAuthToken Property (BackblazeB2 Control)

The authorization token that will be used to authorize requests.

Syntax

backblazeb2control.AccountAuthToken

Default Value

""

Remarks

The authorization token that will be used to authorize requests.

This property reflects the actual authorization token that will be used to authorize requests sent to the server. This token is obtained by calling Authorize to authenticate to the server using the current ApplicationKey and ApplicationKeyId values; it is valid for up to 24 hours.

This property is read-only and not available at design time.

Data Type

String

AccountCapabilities Property (BackblazeB2 Control)

The capabilities that the application key has.

Syntax

backblazeb2control.AccountCapabilities

Default Value

""

Remarks

The capabilities that the application key has.

This property reflects the capabilities that the currently-authenticated application key has. It is formatted as a comma-separated list of one or more of the following strings:

This property is read-only and not available at design time.

Data Type

String

AccountMinPartSize Property (BackblazeB2 Control)

The minimum allowed multipart upload part size.

Syntax

backblazeb2control.AccountMinPartSize

Default Value

-1

Remarks

The minimum allowed multipart upload part size.

This property reflects the minimum allowed multipart upload part size, in bytes.

This property is read-only and not available at design time.

Data Type

Long64

AccountRecPartSize Property (BackblazeB2 Control)

The recommended multipart upload part size.

Syntax

backblazeb2control.AccountRecPartSize

Default Value

-1

Remarks

The recommended multipart upload part size.

This property reflects the recommended multipart upload part size, in bytes.

This property is read-only and not available at design time.

Data Type

Long64

AppKeyMarker Property (BackblazeB2 Control)

A marker indicating what page of application keys to return next.

Syntax

backblazeb2control.AppKeyMarker[=string]

Default Value

""

Remarks

This property will be populated when ListAppKeys is called if the results are paged and there are more pages. To list all application keys, continue to call ListAppKeys until this property returns empty string.

Refer to ListAppKeys for more information.

This property is not available at design time.

Data Type

String

AppKeyCount Property (BackblazeB2 Control)

The number of records in the AppKey arrays.

Syntax

backblazeb2control.AppKeyCount

Default Value

0

Remarks

This property controls the size of the following arrays:

• AppKeyAllowedBucketId
• AppKeyAllowedPrefix
• AppKeyCapabilities
• AppKeyExpirationTime
• AppKeyId
• AppKeyName

The array indices start at 0 and end at AppKeyCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

AppKeyAllowedBucketId Property (BackblazeB2 Control)

The Id of the bucket that the application key is restricted to.

Syntax

backblazeb2control.AppKeyAllowedBucketId(AppKeyIndex)

Default Value

""

Remarks

The Id of the bucket that the application key is restricted to.

This property reflects the Id of the bucket that the application key is restricted to. It will be empty if the application key is not restricted to any specific bucket.

The AppKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AppKeyCount property.

This property is read-only and not available at design time.

Data Type

String

AppKeyAllowedPrefix Property (BackblazeB2 Control)

The file name prefix that the application key is restricted to.

Syntax

backblazeb2control.AppKeyAllowedPrefix(AppKeyIndex)

Default Value

""

Remarks

The file name prefix that the application key is restricted to.

This property reflects the file name prefix that the application key is restricted to. It will be empty if the application key is not restricted to a specific file name prefix.

The AppKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AppKeyCount property.

This property is read-only and not available at design time.

Data Type

String

AppKeyCapabilities Property (BackblazeB2 Control)

The capabilities that the application key has.

Syntax

backblazeb2control.AppKeyCapabilities(AppKeyIndex)

Default Value

""

Remarks

The capabilities that the application key has.

This property reflects the capabilities that the application key has. It is formatted as a comma-separated list of one or more of the following:

The AppKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AppKeyCount property.

This property is read-only and not available at design time.

Data Type

String

AppKeyExpirationTime Property (BackblazeB2 Control)

The application key's expiration time.

Syntax

backblazeb2control.AppKeyExpirationTime(AppKeyIndex)

Default Value

-1

Remarks

The application key's expiration time.

This property reflects the expiration time of the application key, in milliseconds relative to the Unix epoch. It will be -1 if the application key does not expire.

The AppKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AppKeyCount property.

This property is read-only and not available at design time.

Data Type

Long64

AppKeyId Property (BackblazeB2 Control)

The Id of the application key.

Syntax

backblazeb2control.AppKeyId(AppKeyIndex)

Default Value

""

Remarks

The Id of the application key.

This property reflects the unique Id of the application key.

The AppKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AppKeyCount property.

This property is read-only and not available at design time.

Data Type

String

AppKeyName Property (BackblazeB2 Control)

The name of the application key.

Syntax

backblazeb2control.AppKeyName(AppKeyIndex)

Default Value

""

Remarks

The name of the application key.

This property reflects the name assigned to the application key when it was created. Application key names are not used for identification, so there is no requirement for them to be unique.

The AppKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AppKeyCount property.

This property is read-only and not available at design time.

Data Type

String

ApplicationKey Property (BackblazeB2 Control)

The application key to use for authentication.

Syntax

backblazeb2control.ApplicationKey[=string]

Default Value

""

Remarks

This property specifies the application key that should be used for authentication. Both this property and ApplicationKeyId must be set before attempting any operations which connect to the server.

Data Type

String

ApplicationKeyId Property (BackblazeB2 Control)

The application key Id to use for authentication.

Syntax

backblazeb2control.ApplicationKeyId[=string]

Default Value

""

Remarks

This property specifies the application key Id that should be used for authentication. Both this property and ApplicationKey must be set before attempting any operations which connect to the server.

Data Type

String

BucketCount Property (BackblazeB2 Control)

The number of records in the Bucket arrays.

Syntax

backblazeb2control.BucketCount

Default Value

0

Remarks

This property controls the size of the following arrays:

• BucketId
• BucketKind
• BucketName
• BucketRevision

The array indices start at 0 and end at BucketCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

BucketId Property (BackblazeB2 Control)

The Id of the bucket.

Syntax

backblazeb2control.BucketId(BucketIndex)

Default Value

""

Remarks

The Id of the bucket.

This property reflects the unique Id of the bucket.

The BucketIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BucketCount property.

This property is read-only and not available at design time.

Data Type

String

BucketKind Property (BackblazeB2 Control)

The kind of bucket.

Syntax

backblazeb2control.BucketKind(BucketIndex)

Default Value

""

Remarks

The kind of bucket.

This property reflects the bucket's kind. Possible values are allPublic, allPrivate, or snapshot.

The BucketIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BucketCount property.

This property is read-only and not available at design time.

Data Type

String

BucketName Property (BackblazeB2 Control)

The name of the bucket.

Syntax

backblazeb2control.BucketName(BucketIndex)

Default Value

""

Remarks

The name of the bucket.

This property reflects the name of the bucket.

The BucketIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BucketCount property.

This property is read-only and not available at design time.

Data Type

String

BucketRevision Property (BackblazeB2 Control)

The revision number of the bucket.

Syntax

backblazeb2control.BucketRevision(BucketIndex)

Default Value

-1

Remarks

The revision number of the bucket.

This property reflects the bucket's revision number. A bucket's revision number is updated every time the bucket is modified.

The BucketIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BucketCount property.

This property is read-only and not available at design time.

Data Type

Long64

ContentType Property (BackblazeB2 Control)

The content type to send for a file.

Syntax

backblazeb2control.ContentType[=string]

Default Value

""

Remarks

This property can be set before calling UploadFile, StartMultipartUpload, or (if the SendMetadataOnCopy configuration setting is enabled) CopyFile to have its value submitted as the file's Content-Type header value.

If this property is empty, the control will send b2/x-auto, which instructs the server to automatically determine the content type based on the file's extension (or set it to application/octet-stream if it cannot).

This property is not available at design time.

Data Type

String

Delimiter Property (BackblazeB2 Control)

The delimiter string to use when listing files.

Syntax

backblazeb2control.Delimiter[=string]

Default Value

""

Remarks

If this property is non-empty when ListFiles or ListFileVersions is called, any items whose names contain the same string between the specified Prefix and the first occurrence of the specified delimiter that follow will be rolled up into a virtual "folder" element, which is returned in place of the individual files themselves.

If a particular item is a "folder" instead of an actual file or file version, then the FileKind property will be set to folder. The same is also true of the FileList event's Kind parameter.

File Hierarchy Traversal

By using the Delimiter and Prefix properties in tandem, applications can effectively "traverse" a virtual hierarchy of files (or file versions) as if it were a filesystem. For example, assume that files with the following names exist within a bucket:

• MyCompany
• MyCompany/Department1
• MyCompany/Department2
• MyCompany/Department2/EmployeeA
• MyCompany/Department2/EmployeeB

With Delimiter set to /, we can set Prefix to successively "deeper" values before calling ListFiles or ListFileVersions for the following effect:

This property is not available at design time.

Data Type

String

EncryptionAlgorithm Property (BackblazeB2 Control)

The encryption algorithm.

Syntax

backblazeb2control.EncryptionAlgorithm[=integer]

Possible Values

eaAES(0), 
eaBlowfish(1), 
eaCAST(2), 
eaDES(3), 
eaIDEA(4), 
eaRC2(5), 
eaRC4(6), 
eaTEA(7), 
eaTripleDES(8), 
eaTwofish(9), 
eaRijndael(10), 
eaChaCha(11), 
eaXSalsa20(12)

Default Value

0

Remarks

This property specifies the encryption algorithm to be used. The maximum allowable key size is automatically used for the selected algorithm. Possible values are:

Data Type

Integer

EncryptionPassword Property (BackblazeB2 Control)

The encryption password.

Syntax

backblazeb2control.EncryptionPassword[=string]

Default Value

""

Remarks

If this property is populated when UploadFile or DownloadFile is called, the control will attempt to encrypt or decrypt the data before uploading or after downloading it.

The control uses the value specified here to generate the necessary encryption Key and IV values using the PKCS5 password digest algorithm. This provides a simpler alternative to creating and managing Key and IV values directly.

However, it is also possible to explicitly specify the Key and IV values to use by setting the EncryptionKey and EncryptionIV configuration settings. This may be necessary if, e.g., the data needs to be encrypted/decrypted by another utility which generates Key and IV values differently.

This property is not available at design time.

Data Type

String

FileData Property (BackblazeB2 Control)

The data that was downloaded, or that should be uploaded.

Syntax

backblazeb2control.FileData[=string]

Default Value

""

Remarks

This property is populated with file data after calling DownloadFile or DownloadFileById if LocalFile is not set.

This property can also be set before calling UploadFile or UploadPart; its data will be uploaded if LocalFile is not set.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .FileDataB.

This property is not available at design time.

Data Type

Binary String

FileMarker Property (BackblazeB2 Control)

A marker indicating what page of files to return next.

Syntax

backblazeb2control.FileMarker[=string]

Default Value

""

Remarks

This property will be populated when ListFiles or ListMultipartUploads is called if the results are paged and there are more pages. To list all files or multipart uploads, continue to call ListFiles or ListMultipartUploads (respectively) until this property returns empty string.

Refer to ListFiles or ListMultipartUploads for more information.

This property is not available at design time.

Data Type

String

FileCount Property (BackblazeB2 Control)

The number of records in the File arrays.

Syntax

backblazeb2control.FileCount

Default Value

0

Remarks

This property controls the size of the following arrays:

• FileBucketId
• FileContentType
• FileCreatedTime
• FileId
• FileKind
• FileMD5Hash
• FileModifiedTime
• FileName
• FileSHA1Hash
• FileSize

The array indices start at 0 and end at FileCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

FileBucketId Property (BackblazeB2 Control)

The Id of the bucket that the file is in.

Syntax

backblazeb2control.FileBucketId(FileIndex)

Default Value

""

Remarks

The Id of the bucket that the file is in.

This property reflects the Id of the bucket that the file is in.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only and not available at design time.

Data Type

String

FileContentType Property (BackblazeB2 Control)

The content type of the file.

Syntax

backblazeb2control.FileContentType(FileIndex)

Default Value

""

Remarks

The content type of the file.

This property reflects the content type of the file. Always application/x-bz-hide-marker when FileKind is hide; and empty when FileKind is folder.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only and not available at design time.

Data Type

String

FileCreatedTime Property (BackblazeB2 Control)

The file's creation time.

Syntax

backblazeb2control.FileCreatedTime(FileIndex)

Default Value

-1

Remarks

The file's creation time.

This property reflects the file's creation time, in milliseconds relative to the Unix epoch. Always 0 when FileKind is folder.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only and not available at design time.

Data Type

Long64

FileId Property (BackblazeB2 Control)

The Id of the file.

Syntax

backblazeb2control.FileId(FileIndex)

Default Value

""

Remarks

The Id of the file.

This property reflects the Id of the file. Always empty when FileKind is folder.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only and not available at design time.

Data Type

String

FileKind Property (BackblazeB2 Control)

The kind of file.

Syntax

backblazeb2control.FileKind(FileIndex)

Default Value

""

Remarks

The kind of file.

This property reflects the file's kind. Possible values are:

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only and not available at design time.

Data Type

String

FileMD5Hash Property (BackblazeB2 Control)

An MD5 hash of the file's contents.

Syntax

backblazeb2control.FileMD5Hash(FileIndex)

Default Value

""

Remarks

An MD5 hash of the file's contents.

This property reflects a hex-encoded MD5 hash of the file's contents, or empty string if such a hash is not available.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only and not available at design time.

Data Type

String

FileModifiedTime Property (BackblazeB2 Control)

The file's last modified time.

Syntax

backblazeb2control.FileModifiedTime(FileIndex)

Default Value

-1

Remarks

The file's last modified time.

This property reflects the file's last modified time, in milliseconds relative to the Unix epoch.

Note that this property will only be populated if a src_last_modified_millis metadata item is included for the file, and if that metadata item's value can be parsed as a 64-bit integer; otherwise, it will be -1. Refer to the ClientModifiedTime configuration setting for more information.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only and not available at design time.

Data Type

Long64

FileName Property (BackblazeB2 Control)

The name of the file.

Syntax

backblazeb2control.FileName(FileIndex)

Default Value

""

Remarks

The name of the file.

This property reflects the name of the file.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only and not available at design time.

Data Type

String

FileSHA1Hash Property (BackblazeB2 Control)

A SHA1 hash of the file's contents.

Syntax

backblazeb2control.FileSHA1Hash(FileIndex)

Default Value

""

Remarks

A SHA1 hash of the file's contents.

This property reflects a hex-encoded SHA1 hash of the file's contents, or empty string if such a hash is not available. Always empty if FileKind is folder or hide.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only and not available at design time.

Data Type

String

FileSize Property (BackblazeB2 Control)

The file's size.

Syntax

backblazeb2control.FileSize(FileIndex)

Default Value

0

Remarks

The file's size.

This property reflects the file's size, in bytes. Always 0 when FileKind is folder, hide, or start.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only and not available at design time.

Data Type

Long64

FirewallAutoDetect Property (BackblazeB2 Control)

Whether to automatically detect and use firewall system settings, if available.

Syntax

backblazeb2control.FirewallAutoDetect[=boolean]

Default Value

False

Remarks

Whether to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (BackblazeB2 Control)

The type of firewall to connect through.

Syntax

backblazeb2control.FirewallType[=integer]

Possible Values

fwNone(0), 
fwTunnel(1), 
fwSOCKS4(2), 
fwSOCKS5(3), 
fwSOCKS4A(10)

Default Value

0

Remarks

The type of firewall to connect through. The applicable values are as follows:

Data Type

Integer

FirewallHost Property (BackblazeB2 Control)

The name or IP address of the firewall (optional).

Syntax

backblazeb2control.FirewallHost[=string]

Default Value

""

Remarks

The name or IP address of the firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the control fails with an error.

Data Type

String

FirewallPassword Property (BackblazeB2 Control)

A password if authentication is to be used when connecting through the firewall.

Syntax

backblazeb2control.FirewallPassword[=string]

Default Value

""

Remarks

A password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the control fails with an error.

Data Type

String

FirewallPort Property (BackblazeB2 Control)

The Transmission Control Protocol (TCP) port for the firewall Host .

Syntax

backblazeb2control.FirewallPort[=integer]

Default Value

0

Remarks

The Transmission Control Protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (BackblazeB2 Control)

A username if authentication is to be used when connecting through a firewall.

Syntax

backblazeb2control.FirewallUser[=string]

Default Value

""

Remarks

A username if authentication is to be used when connecting through a firewall. If FirewallHost is specified, this property and the FirewallPassword property are used to connect and authenticate to the given Firewall. If the authentication fails, the control fails with an error.

Data Type

String

Idle Property (BackblazeB2 Control)

The current status of the control.

Syntax

backblazeb2control.Idle

Default Value

True

Remarks

This property will be False if the component is currently busy (communicating or waiting for an answer), and True at all other times.

This property is read-only.

Data Type

Boolean

LocalFile Property (BackblazeB2 Control)

The location of the local file.

Syntax

backblazeb2control.LocalFile[=string]

Default Value

""

Remarks

This property specifies the location of a file on disk. This is used as the source file when calling UploadFile or UploadPart; and as the destination file when calling DownloadFile or DownloadFileById.

Data Type

String

LocalHost Property (BackblazeB2 Control)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

backblazeb2control.LocalHost[=string]

Default Value

""

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the control initiate connections (or accept in the case of server controls) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the control is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

MetadataCount Property (BackblazeB2 Control)

The number of records in the Metadata arrays.

Syntax

backblazeb2control.MetadataCount[=integer]

Default Value

0

Remarks

This property controls the size of the following arrays:

• MetadataName
• MetadataValue

The array indices start at 0 and end at MetadataCount - 1.

This property is not available at design time.

Data Type

Integer

MetadataName Property (BackblazeB2 Control)

The name of the metadata item.

Syntax

backblazeb2control.MetadataName(MetadataIndex)[=string]

Default Value

""

Remarks

The name of the metadata item.

This property specifies the name of the metadata item. Metadata item names may be up to 50 characters in length, and must consist solely of letters, numbers, hyphens (-), and underscores (_). The server stores all metadata item names in lowercase.

A metadata item's name cannot start with b2- unless said name is one those explicitly defined by the Backblaze B2 API documentation. Keep in mind that the MetadataValue of such a metadata item must comply with the format specified by the Backblaze B2 API documentation as well, otherwise the server will reject it.

The MetadataIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MetadataCount property.

This property is not available at design time.

Data Type

String

MetadataValue Property (BackblazeB2 Control)

The value of the metadata item.

Syntax

backblazeb2control.MetadataValue(MetadataIndex)[=string]

Default Value

""

Remarks

The value of the metadata item.

This property specifies the value of the metadata item.

The MetadataIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MetadataCount property.

This property is not available at design time.

Data Type

String

OtherHeaders Property (BackblazeB2 Control)

Other headers as determined by the user (optional).

Syntax

backblazeb2control.OtherHeaders[=string]

Default Value

""

Remarks

This property can be set to a string of headers to be appended to the HTTP request headers created from other properties like ContentType and From.

The headers must follow the format Header: Value as described in the HTTP specifications. Header lines should be separated by CRLF (Chr$(13) & Chr$(10)) .

Use this property with caution. If this property contains invalid headers, HTTP requests may fail.

This property is useful for extending the functionality of the control beyond what is provided.

This property is not available at design time.

Data Type

String

Overwrite Property (BackblazeB2 Control)

Determines if local files are overwritten.

Syntax

backblazeb2control.Overwrite[=boolean]

Default Value

False

Remarks

This property controls whether local files are overwritten when calling DownloadFile or DownloadFileById. It is only applicable to local files.

Data Type

Boolean

ParsedHeaderCount Property (BackblazeB2 Control)

The number of records in the ParsedHeader arrays.

Syntax

backblazeb2control.ParsedHeaderCount

Default Value

0

Remarks

This property controls the size of the following arrays:

• ParsedHeaderField
• ParsedHeaderValue

The array indices start at 0 and end at ParsedHeaderCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

ParsedHeaderField Property (BackblazeB2 Control)

This property contains the name of the HTTP header (this is the same case as it is delivered).

Syntax

backblazeb2control.ParsedHeaderField(ParsedHeaderIndex)

Default Value

""

Remarks

This property contains the name of the HTTP Header (this is the same case as it is delivered).

The ParsedHeaderIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ParsedHeaderCount property.

This property is read-only and not available at design time.

Data Type

String

ParsedHeaderValue Property (BackblazeB2 Control)

This property contains the header contents.

Syntax

backblazeb2control.ParsedHeaderValue(ParsedHeaderIndex)

Default Value

""

Remarks

This property contains the Header contents.

The ParsedHeaderIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ParsedHeaderCount property.

This property is read-only and not available at design time.

Data Type

String

PartMarker Property (BackblazeB2 Control)

A marker indicating what page of parts to return next.

Syntax

backblazeb2control.PartMarker[=string]

Default Value

""

Remarks

This property will be populated when ListParts is called if the results are paged and there are more pages. To list all parts, continue to call ListParts until this property returns empty string.

Refer to ListParts for more information.

This property is not available at design time.

Data Type

String

PartCount Property (BackblazeB2 Control)

The number of records in the Part arrays.

Syntax

backblazeb2control.PartCount

Default Value

0

Remarks

This property controls the size of the following arrays:

• PartCreatedTime
• PartMD5Hash
• PartNumber
• PartSHA1Hash
• PartSize

The array indices start at 0 and end at PartCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

PartCreatedTime Property (BackblazeB2 Control)

The part's creation time.

Syntax

backblazeb2control.PartCreatedTime(PartIndex)

Default Value

-1

Remarks

The part's creation time.

This property reflects the part's creation time (i.e., upload time), in milliseconds relative to the Unix epoch.

The PartIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PartCount property.

This property is read-only and not available at design time.

Data Type

Long64

PartMD5Hash Property (BackblazeB2 Control)

An MD5 hash of the part's contents.

Syntax

backblazeb2control.PartMD5Hash(PartIndex)

Default Value

""

Remarks

An MD5 hash of the part's contents.

This property reflects a hex-encoded MD5 hash of the part's contents, or empty string if such a hash is not available.

The PartIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PartCount property.

This property is read-only and not available at design time.

Data Type

String

PartNumber Property (BackblazeB2 Control)

The number of the part.

Syntax

backblazeb2control.PartNumber(PartIndex)

Default Value

-1

Remarks

The number of the part.

This property specifies the number of the part. Must a be a value in the range 1 to 10000, inclusive.

The PartIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PartCount property.

This property is read-only and not available at design time.

Data Type

Integer

PartSHA1Hash Property (BackblazeB2 Control)

A SHA1 hash of the part's contents.

Syntax

backblazeb2control.PartSHA1Hash(PartIndex)

Default Value

""

Remarks

A SHA1 hash of the part's contents.

This property reflects a hex-encoded SHA1 hash of the part's contents.

The PartIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PartCount property.

This property is read-only and not available at design time.

Data Type

String

PartSize Property (BackblazeB2 Control)

The part's size.

Syntax

backblazeb2control.PartSize(PartIndex)

Default Value

0

Remarks

The part's size.

This property reflects the part's size, in bytes.

The PartIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PartCount property.

This property is read-only and not available at design time.

Data Type

Long64

Prefix Property (BackblazeB2 Control)

A prefix used to restrict the results returned when listing files.

Syntax

backblazeb2control.Prefix[=string]

Default Value

""

Remarks

This property, if non-empty, is used to restrict the values returned by ListFiles, ListFileVersions, or ListMultipartUploads to only the items whose names begin with the given prefix.

Note: If the currently-authenticated application key is restricted to a specific file name prefix (indicated by the AccountAllowedPrefix property being non-empty), then this property will automatically be set to that prefix if it is empty when one of the aforementioned methods is called.

File Hierarchy Traversal

By using the Delimiter and Prefix properties in tandem, applications can effectively "traverse" a virtual hierarchy of files (or file versions) as if it were a filesystem. For example, assume that files with the following names exist within a bucket:

• MyCompany
• MyCompany/Department1
• MyCompany/Department2
• MyCompany/Department2/EmployeeA
• MyCompany/Department2/EmployeeB

With Delimiter set to /, we can set Prefix to successively "deeper" values before calling ListFiles or ListFileVersions for the following effect:

This property is not available at design time.

Data Type

String

ProxyAuthScheme Property (BackblazeB2 Control)

The type of authorization to perform when connecting to the proxy.

Syntax

backblazeb2control.ProxyAuthScheme[=integer]

Possible Values

authBasic(0), 
authDigest(1), 
authProprietary(2), 
authNone(3), 
authNtlm(4), 
authNegotiate(5)

Default Value

0

Remarks

The type of authorization to perform when connecting to the proxy. This is used only when the ProxyUser and ProxyPassword properties are set.

ProxyAuthScheme should be set to authNone (3) when no authentication is expected.

By default, ProxyAuthScheme is authBasic (0), and if the ProxyUser and ProxyPassword properties are set, the control will attempt basic authentication.

If ProxyAuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If ProxyAuthScheme is set to authProprietary (2), then the authorization token will not be generated by the control. Look at the configuration file for the control being used to find more information about manually setting this token.

If ProxyAuthScheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of ProxyUser and ProxyPassword.

Data Type

Integer

ProxyAutoDetect Property (BackblazeB2 Control)

Whether to automatically detect and use proxy system settings, if available.

Syntax

backblazeb2control.ProxyAutoDetect[=boolean]

Default Value

False

Remarks

Whether to automatically detect and use proxy system settings, if available. The default value is .

Data Type

Boolean

ProxyPassword Property (BackblazeB2 Control)

A password if authentication is to be used for the proxy.

Syntax

backblazeb2control.ProxyPassword[=string]

Default Value

""

Remarks

A password if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

ProxyPort Property (BackblazeB2 Control)

The Transmission Control Protocol (TCP) port for the proxy Server (default 80).

Syntax

backblazeb2control.ProxyPort[=integer]

Default Value

80

Remarks

The Transmission Control Protocol (TCP) port for the proxy ProxyServer (default 80). See the description of the ProxyServer property for details.

Data Type

Integer

ProxyServer Property (BackblazeB2 Control)

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

Syntax

backblazeb2control.ProxyServer[=string]

Default Value

""

Remarks

If a proxy ProxyServer is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the ProxyServer property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the ProxyServer property is set to the corresponding address. If the search is not successful, an error is returned.

Data Type

String

ProxySSL Property (BackblazeB2 Control)

When to use a Secure Sockets Layer (SSL) for the connection to the proxy.

Syntax

backblazeb2control.ProxySSL[=integer]

Possible Values

psAutomatic(0), 
psAlways(1), 
psNever(2), 
psTunnel(3)

Default Value

0

Remarks

When to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

Data Type

Integer

ProxyUser Property (BackblazeB2 Control)

A username if authentication is to be used for the proxy.

Syntax

backblazeb2control.ProxyUser[=string]

Default Value

""

Remarks

A username if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

QueryParamCount Property (BackblazeB2 Control)

The number of records in the QueryParam arrays.

Syntax

backblazeb2control.QueryParamCount[=integer]

Default Value

0

Remarks

This property controls the size of the following arrays:

• QueryParamName
• QueryParamValue

The array indices start at 0 and end at QueryParamCount - 1.

This property is not available at design time.

Data Type

Integer

QueryParamName Property (BackblazeB2 Control)

The name of the query parameter.

Syntax

backblazeb2control.QueryParamName(QueryParamIndex)[=string]

Default Value

""

Remarks

The name of the query parameter.

This property specifies the name of the query parameter.

The QueryParamIndex parameter specifies the index of the item in the array. The size of the array is controlled by the QueryParamCount property.

This property is not available at design time.

Data Type

String

QueryParamValue Property (BackblazeB2 Control)

The value of the query parameter.

Syntax

backblazeb2control.QueryParamValue(QueryParamIndex)[=string]

Default Value

""

Remarks

The value of the query parameter.

This property specifies the value of the query parameter. The control will automatically URL-encode this value when sending the request.

The QueryParamIndex parameter specifies the index of the item in the array. The size of the array is controlled by the QueryParamCount property.

This property is not available at design time.

Data Type

String

Range Property (BackblazeB2 Control)

The range of bytes to request.

Syntax

backblazeb2control.Range[=string]

Default Value

""

Remarks

This property specifies the range of bytes to request from the server. If this property is non-empty when a DownloadFile or DownloadFileById request is being constructed, a header like Range: bytes=Range will be added to the request, with Range substituted with the specified value.

There are two valid formats for this property's value:

• StartByte-
• StartByte-EndByte

Note: If the StartByte property is greater than zero when one of the aforementioned methods is called (i.e., when a download is being resumed), and this property is non-empty, the control will automatically advance the StartByte value in the specified range by StartByte bytes when sending the Range header to the server. This ensures that the previously-downloaded data at the start of the specified range is not downloaded again when the download is resumed.

This property is not available at design time.

Data Type

String

SSLAcceptServerCertEffectiveDate Property (BackblazeB2 Control)

The date on which this certificate becomes valid.

Syntax

backblazeb2control.SSLAcceptServerCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExpirationDate Property (BackblazeB2 Control)

The date on which the certificate expires.

Syntax

backblazeb2control.SSLAcceptServerCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExtendedKeyUsage Property (BackblazeB2 Control)

A comma-delimited list of extended key usage identifiers.

Syntax

backblazeb2control.SSLAcceptServerCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprint Property (BackblazeB2 Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

backblazeb2control.SSLAcceptServerCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA1 Property (BackblazeB2 Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

backblazeb2control.SSLAcceptServerCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA256 Property (BackblazeB2 Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

backblazeb2control.SSLAcceptServerCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLAcceptServerCertIssuer Property (BackblazeB2 Control)

The issuer of the certificate.

Syntax

backblazeb2control.SSLAcceptServerCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKey Property (BackblazeB2 Control)

The private key of the certificate (if available).

Syntax

backblazeb2control.SSLAcceptServerCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLAcceptServerCertPrivateKey may be available but not exportable. In this case, SSLAcceptServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKeyAvailable Property (BackblazeB2 Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

backblazeb2control.SSLAcceptServerCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLAcceptServerCertPrivateKey is available for the selected certificate. If SSLAcceptServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLAcceptServerCertPrivateKeyContainer Property (BackblazeB2 Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

backblazeb2control.SSLAcceptServerCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLAcceptServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKey Property (BackblazeB2 Control)

The public key of the certificate.

Syntax

backblazeb2control.SSLAcceptServerCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyAlgorithm Property (BackblazeB2 Control)

The textual description of the certificate's public key algorithm.

Syntax

backblazeb2control.SSLAcceptServerCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyLength Property (BackblazeB2 Control)

The length of the certificate's public key (in bits).

Syntax

backblazeb2control.SSLAcceptServerCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertSerialNumber Property (BackblazeB2 Control)

The serial number of the certificate encoded as a string.

Syntax

backblazeb2control.SSLAcceptServerCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLAcceptServerCertSignatureAlgorithm Property (BackblazeB2 Control)

The text description of the certificate's signature algorithm.

Syntax

backblazeb2control.SSLAcceptServerCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertStore Property (BackblazeB2 Control)

The name of the certificate store for the client certificate.

Syntax

backblazeb2control.SSLAcceptServerCertStore[=string]

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLAcceptServerCertStoreType property denotes the type of the certificate store specified by SSLAcceptServerCertStore. If the store is password-protected, specify the password in SSLAcceptServerCertStorePassword.

SSLAcceptServerCertStore is used in conjunction with the SSLAcceptServerCertSubject property to specify client certificates. If SSLAcceptServerCertStore has a value, and SSLAcceptServerCertSubject or SSLAcceptServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLAcceptServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLAcceptServerCertStoreB.

Data Type

Binary String

SSLAcceptServerCertStorePassword Property (BackblazeB2 Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

backblazeb2control.SSLAcceptServerCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLAcceptServerCertStoreType Property (BackblazeB2 Control)

The type of certificate store for this certificate.

Syntax

backblazeb2control.SSLAcceptServerCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLAcceptServerCertSubjectAltNames Property (BackblazeB2 Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

backblazeb2control.SSLAcceptServerCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintMD5 Property (BackblazeB2 Control)

The MD5 hash of the certificate.

Syntax

backblazeb2control.SSLAcceptServerCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA1 Property (BackblazeB2 Control)

The SHA-1 hash of the certificate.

Syntax

backblazeb2control.SSLAcceptServerCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA256 Property (BackblazeB2 Control)

The SHA-256 hash of the certificate.

Syntax

backblazeb2control.SSLAcceptServerCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsage Property (BackblazeB2 Control)

The text description of UsageFlags .

Syntax

backblazeb2control.SSLAcceptServerCertUsage

Default Value

""

Remarks

The text description of SSLAcceptServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsageFlags Property (BackblazeB2 Control)

The flags that show intended use for the certificate.

Syntax

backblazeb2control.SSLAcceptServerCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLAcceptServerCertUsageFlags is a combination of the following flags:

Please see the SSLAcceptServerCertUsage property for a text representation of SSLAcceptServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertVersion Property (BackblazeB2 Control)

The certificate's version number.

Syntax

backblazeb2control.SSLAcceptServerCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLAcceptServerCertSubject Property (BackblazeB2 Control)

The subject of the certificate used for client authentication.

Syntax

backblazeb2control.SSLAcceptServerCertSubject[=string]

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLAcceptServerCertEncoded Property (BackblazeB2 Control)

The certificate (PEM/Base64 encoded).

Syntax

backblazeb2control.SSLAcceptServerCertEncoded[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLAcceptServerCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLCertEffectiveDate Property (BackblazeB2 Control)

The date on which this certificate becomes valid.

Syntax

backblazeb2control.SSLCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLCertExpirationDate Property (BackblazeB2 Control)

The date on which the certificate expires.

Syntax

backblazeb2control.SSLCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLCertExtendedKeyUsage Property (BackblazeB2 Control)

A comma-delimited list of extended key usage identifiers.

Syntax

backblazeb2control.SSLCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLCertFingerprint Property (BackblazeB2 Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

backblazeb2control.SSLCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLCertFingerprintSHA1 Property (BackblazeB2 Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

backblazeb2control.SSLCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLCertFingerprintSHA256 Property (BackblazeB2 Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

backblazeb2control.SSLCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLCertIssuer Property (BackblazeB2 Control)

The issuer of the certificate.

Syntax

backblazeb2control.SSLCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLCertPrivateKey Property (BackblazeB2 Control)

The private key of the certificate (if available).

Syntax

backblazeb2control.SSLCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLCertPrivateKey may be available but not exportable. In this case, SSLCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLCertPrivateKeyAvailable Property (BackblazeB2 Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

backblazeb2control.SSLCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLCertPrivateKey is available for the selected certificate. If SSLCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLCertPrivateKeyContainer Property (BackblazeB2 Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

backblazeb2control.SSLCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLCertPublicKey Property (BackblazeB2 Control)

The public key of the certificate.

Syntax

backblazeb2control.SSLCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLCertPublicKeyAlgorithm Property (BackblazeB2 Control)

The textual description of the certificate's public key algorithm.

Syntax

backblazeb2control.SSLCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertPublicKeyLength Property (BackblazeB2 Control)

The length of the certificate's public key (in bits).

Syntax

backblazeb2control.SSLCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLCertSerialNumber Property (BackblazeB2 Control)

The serial number of the certificate encoded as a string.

Syntax

backblazeb2control.SSLCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLCertSignatureAlgorithm Property (BackblazeB2 Control)

The text description of the certificate's signature algorithm.

Syntax

backblazeb2control.SSLCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertStore Property (BackblazeB2 Control)

The name of the certificate store for the client certificate.

Syntax

backblazeb2control.SSLCertStore[=string]

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password-protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertStoreB.

Data Type

Binary String

SSLCertStorePassword Property (BackblazeB2 Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

backblazeb2control.SSLCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (BackblazeB2 Control)

The type of certificate store for this certificate.

Syntax

backblazeb2control.SSLCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubjectAltNames Property (BackblazeB2 Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

backblazeb2control.SSLCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLCertThumbprintMD5 Property (BackblazeB2 Control)

The MD5 hash of the certificate.

Syntax

backblazeb2control.SSLCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA1 Property (BackblazeB2 Control)

The SHA-1 hash of the certificate.

Syntax

backblazeb2control.SSLCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA256 Property (BackblazeB2 Control)

The SHA-256 hash of the certificate.

Syntax

backblazeb2control.SSLCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertUsage Property (BackblazeB2 Control)

The text description of UsageFlags .

Syntax

backblazeb2control.SSLCertUsage

Default Value

""

Remarks

The text description of SSLCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLCertUsageFlags Property (BackblazeB2 Control)

The flags that show intended use for the certificate.

Syntax

backblazeb2control.SSLCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLCertUsageFlags is a combination of the following flags:

Please see the SSLCertUsage property for a text representation of SSLCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLCertVersion Property (BackblazeB2 Control)

The certificate's version number.

Syntax

backblazeb2control.SSLCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLCertSubject Property (BackblazeB2 Control)

The subject of the certificate used for client authentication.

Syntax

backblazeb2control.SSLCertSubject[=string]

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLCertEncoded Property (BackblazeB2 Control)

The certificate (PEM/Base64 encoded).

Syntax

backblazeb2control.SSLCertEncoded[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLProvider Property (BackblazeB2 Control)

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax

backblazeb2control.SSLProvider[=integer]

Possible Values

sslpAutomatic(0), 
sslpPlatform(1), 
sslpInternal(2)

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the control will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:

In most cases using the default value (Automatic) is recommended. The control will select a provider depending on the current platform.

When Automatic is selected, the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used.

Data Type

Integer

SSLServerCertEffectiveDate Property (BackblazeB2 Control)

The date on which this certificate becomes valid.

Syntax

backblazeb2control.SSLServerCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExpirationDate Property (BackblazeB2 Control)

The date on which the certificate expires.

Syntax

backblazeb2control.SSLServerCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExtendedKeyUsage Property (BackblazeB2 Control)

A comma-delimited list of extended key usage identifiers.

Syntax

backblazeb2control.SSLServerCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLServerCertFingerprint Property (BackblazeB2 Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

backblazeb2control.SSLServerCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA1 Property (BackblazeB2 Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

backblazeb2control.SSLServerCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA256 Property (BackblazeB2 Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

backblazeb2control.SSLServerCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLServerCertIssuer Property (BackblazeB2 Control)

The issuer of the certificate.

Syntax

backblazeb2control.SSLServerCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLServerCertPrivateKey Property (BackblazeB2 Control)

The private key of the certificate (if available).

Syntax

backblazeb2control.SSLServerCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLServerCertPrivateKey may be available but not exportable. In this case, SSLServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLServerCertPrivateKeyAvailable Property (BackblazeB2 Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

backblazeb2control.SSLServerCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLServerCertPrivateKey is available for the selected certificate. If SSLServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLServerCertPrivateKeyContainer Property (BackblazeB2 Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

backblazeb2control.SSLServerCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLServerCertPublicKey Property (BackblazeB2 Control)

The public key of the certificate.

Syntax

backblazeb2control.SSLServerCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyAlgorithm Property (BackblazeB2 Control)

The textual description of the certificate's public key algorithm.

Syntax

backblazeb2control.SSLServerCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyLength Property (BackblazeB2 Control)

The length of the certificate's public key (in bits).

Syntax

backblazeb2control.SSLServerCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLServerCertSerialNumber Property (BackblazeB2 Control)

The serial number of the certificate encoded as a string.

Syntax

backblazeb2control.SSLServerCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLServerCertSignatureAlgorithm Property (BackblazeB2 Control)

The text description of the certificate's signature algorithm.

Syntax

backblazeb2control.SSLServerCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertStore Property (BackblazeB2 Control)

The name of the certificate store for the client certificate.

Syntax

backblazeb2control.SSLServerCertStore

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLServerCertStoreType property denotes the type of the certificate store specified by SSLServerCertStore. If the store is password-protected, specify the password in SSLServerCertStorePassword.

SSLServerCertStore is used in conjunction with the SSLServerCertSubject property to specify client certificates. If SSLServerCertStore has a value, and SSLServerCertSubject or SSLServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLServerCertStoreB.

This property is read-only.

Data Type

Binary String

SSLServerCertStorePassword Property (BackblazeB2 Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

backblazeb2control.SSLServerCertStorePassword

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

This property is read-only.

Data Type

String

SSLServerCertStoreType Property (BackblazeB2 Control)

The type of certificate store for this certificate.

Syntax

backblazeb2control.SSLServerCertStoreType

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

This property is read-only.

Data Type

Integer

SSLServerCertSubjectAltNames Property (BackblazeB2 Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

backblazeb2control.SSLServerCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLServerCertThumbprintMD5 Property (BackblazeB2 Control)

The MD5 hash of the certificate.

Syntax

backblazeb2control.SSLServerCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA1 Property (BackblazeB2 Control)

The SHA-1 hash of the certificate.

Syntax

backblazeb2control.SSLServerCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA256 Property (BackblazeB2 Control)

The SHA-256 hash of the certificate.

Syntax

backblazeb2control.SSLServerCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertUsage Property (BackblazeB2 Control)

The text description of UsageFlags .

Syntax

backblazeb2control.SSLServerCertUsage

Default Value

""

Remarks

The text description of SSLServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLServerCertUsageFlags Property (BackblazeB2 Control)

The flags that show intended use for the certificate.

Syntax

backblazeb2control.SSLServerCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLServerCertUsageFlags is a combination of the following flags:

Please see the SSLServerCertUsage property for a text representation of SSLServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLServerCertVersion Property (BackblazeB2 Control)

The certificate's version number.

Syntax

backblazeb2control.SSLServerCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLServerCertSubject Property (BackblazeB2 Control)

The subject of the certificate used for client authentication.

Syntax

backblazeb2control.SSLServerCertSubject

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

This property is read-only.

Data Type

String

SSLServerCertEncoded Property (BackblazeB2 Control)

The certificate (PEM/Base64 encoded).

Syntax

backblazeb2control.SSLServerCertEncoded

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLServerCertEncodedB.

This property is read-only and not available at design time.

Data Type

Binary String

StartByte Property (BackblazeB2 Control)

The byte offset from which to resume the upload or download.

Syntax

backblazeb2control.StartByte[=long64]

Default Value

0

Remarks

This property specifies the byte offset from which to resume an automatic multipart upload initiated by UploadFile, or a download initiated by DownloadFile or DownloadFileById. Refer to those methods' documentation for more information about resuming uploads and downloads.

This property is not available at design time.

Data Type

Long64

Timeout Property (BackblazeB2 Control)

The timeout for the control.

Syntax

backblazeb2control.Timeout[=integer]

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the control will wait for the operation to complete before returning control.

The control will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the control fails with an error.

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

VersionMarker Property (BackblazeB2 Control)

A marker indicating what page of file versions to return next.

Syntax

backblazeb2control.VersionMarker[=string]

Default Value

""

Remarks

This property will be populated when ListFileVersions is called if the results are paged and there are more pages. To list all file versions, continue to call ListFileVersions until this property returns empty string.

Refer to ListFileVersions for more information.

This property is not available at design time.

Data Type

String

AbortMultipartUpload Method (BackblazeB2 Control)

Aborts a multipart upload.

Syntax

backblazeb2control.AbortMultipartUpload MultipartFileId

Remarks

This method aborts the multipart upload of the file specified by MultipartFileId, and invalidates the given Id.

When this method is called, all parts that have been uploaded for the multipart upload are deleted from the server.

The currently-authenticated application key must have the writeFiles capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

AddMetadata Method (BackblazeB2 Control)

Adds a metadata item to the Metadata properties.

Syntax

backblazeb2control.AddMetadata Name, Value

Remarks

This method adds a metadata item with the given Name and Value to the Metadata properties. Name may be up to 50 characters in length, and must consist solely of letters, numbers, hyphens (-), and underscores (_). The server stores all metadata item names in lowercase.

A metadata item's name cannot start with b2- unless said name is one those explicitly defined by the Backblaze B2 API documentation. Keep in mind that the value of such a metadata item must comply with the format specified by the Backblaze B2 API documentation as well, otherwise the server will reject it.

Note that there is a limit of 10 metadata items per bucket and per file; the control does not enforce this limit, but the server will return an error if it is exceeded. For files specifically, any value set using the ClientModifiedTime configuration setting will count towards this limit; refer that setting's documentation for more information.

AddQueryParam Method (BackblazeB2 Control)

Adds a query parameter to the QueryParams properties.

Syntax

backblazeb2control.AddQueryParam Name, Value

Remarks

This method is used to add a query parameter to the QueryParams properties. Name specifies the name of the parameter, and Value specifies the value of the parameter.

All specified Values will be URL encoded by the control automatically. Consult the service documentation for details on the available parameters.

Authorize Method (BackblazeB2 Control)

Authenticates the control with the server using the current application key and Id.

Syntax

backblazeb2control.Authorize 

Remarks

This method authenticates the control with the server using the values held by ApplicationKey and ApplicationKeyId. A successful call to this method will clear and repopulate the following:

• Account property
• APIURL configuration setting
• DownloadURL configuration setting
• FragmentSize configuration setting (if necessary; refer to its documentation for more information)
• SimpleUploadLimit configuration setting (if necessary; refer to its documentation for more information)

The control must authenticate with the server before any other requests can be attempted; the control will call it automatically if necessary. As part of the authentication process, the server returns an authorization token which must be used to authorize all further requests; this token is valid for up to 24 hours. When it expires, this method must be called again.

CompleteMultipartUpload Method (BackblazeB2 Control)

Completes a multipart upload by assembling the previously uploaded parts.

Syntax

backblazeb2control.CompleteMultipartUpload MultipartFileId

Remarks

This method completes the multipart upload of the file specified by MultipartFileId. The server will assemble all of the parts that have been uploaded into a single file. (Note: The assembled file keeps MultipartFileId as its Id.)

Note that this method automatically calls ListParts internally to obtain the information needed to complete the multipart upload. This process does not alter the Parts properties, nor does it cause the PartList event to fire.

The currently-authenticated application key must have the writeFiles capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

Config Method (BackblazeB2 Control)

Sets or retrieves a configuration setting.

Syntax

backblazeb2control.Config ConfigurationString

Remarks

Config is a generic method available in every control. It is used to set and retrieve configuration settings for the control.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the control, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

CopyFile Method (BackblazeB2 Control)

Copies a file.

Syntax

backblazeb2control.CopyFile SrcFileId, DestBucketId, DestFileName

Remarks

This method copies the file version specified by SrcFileId to the bucket specified by DestBucketId with the name DestFileName. The Id of the newly-created file is returned. If DestBucketId is empty, the source file's bucket is used as the destination bucket.

DestFileName is subject to the same restrictions described in the UploadFile method's documentation; refer to it for more information. If a file named DestFileName already exists in the destination bucket, a new version of it is created.

If the SendMetadataOnCopy configuration setting is enabled, and the ContentType property, the Metadata properties, and/or the ClientModifiedTime configuration setting are non-empty, then their values will be applied to the destination file. Otherwise, the server will copy the source file's content type and metadata to the destination file.

Finally, note that this method can only be used to copy files up to 5GB in size (or, if Range is non-empty, a range of up to 5GB of data from a larger file). To copy more than 5GB of data, start a new multipart upload with StartMultipartUpload, and then use the CopyPart method to copy the desired data in parts.

The currently-authenticated application key must have the writeFiles and (if the source file's bucket kind is allPrivate) readFiles capabilities to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

CopyPart Method (BackblazeB2 Control)

Copies the specified file as part of a multipart upload.

Syntax

backblazeb2control.CopyPart SrcFileId, MultipartFileId, PartNumber

Remarks

This method copies the file version specified by SrcFileId to a new part in the multipart upload of the file specified by MultipartFileId. The part's number is specified by PartNumber; it must be a value in the range 1 to 10000, inclusive. If the specified multipart upload already has a part with the given PartNumber, it is replaced with the one created by this request.

All parts must be between 5MB and 5GB in size (except for the last part, which can be as small as 1 byte). The Range property can optionally be set before calling this method to copy only a specific range of data from the specified source file.

The currently-authenticated application key must have the writeFiles and (if the source file's bucket kind is allPrivate) readFiles capabilities to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

CreateAppKey Method (BackblazeB2 Control)

Creates a new application key.

Syntax

backblazeb2control.CreateAppKey KeyName, Capabilities, AllowedBucketId, AllowedPrefix, ValidityDuration

Remarks

This method creates a new application key named KeyName with the specified Capabilities. If successful, this method returns a string containing the newly-created application key's Id, followed by the key itself, separated by a newline (\n) character; for example:

[application_key_id]
[application_key]

The string passed for Capabilities must be formatted as a comma-separated list of one or more of the following:

To restrict the new application key to a specific bucket, pass the bucket's Id for AllowedBucketId. To further restrict it to files with a specific prefix within that bucket, pass said prefix for AllowedPrefix. It is not possible to apply a prefix restriction without a bucket restriction.

The ValidityDuration parameter specifies how many seconds the new application key will be valid for. The maximum valid value is 86400000 (1000 days); values less than 1 will cause the application key to remain valid indefinitely.

The currently-authenticated application key must have the writeKeys capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

CreateBucket Method (BackblazeB2 Control)

Creates a new bucket.

Syntax

backblazeb2control.CreateBucket BucketName, Kind

Remarks

This method creates a new bucket named BucketName of the specified Kind. Valid values for Kind are allPrivate (default if empty) and allPublic. Each account may have up to 100 buckets.

The value passed for BucketName must comply with the following restrictions:

• Must be between 6 and 50 characters long (inclusive).
• Must consist solely of letters, digits, and hyphens (-).
• Cannot start with the string b2-.
• Must be globally unique (i.e., no two accounts may have a bucket with the same name) when compared case-insensitively.

If any items are present in the Metadata properties, they will also be included in the request and applied to the newly-created bucket. Keep in mind that the server enforces a limit of 10 metadata items per bucket.

The currently-authenticated application key must have the writeBuckets capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

DeleteAppKey Method (BackblazeB2 Control)

Deletes an application key.

Syntax

backblazeb2control.DeleteAppKey KeyId

Remarks

This method deletes the application key specified by KeyId.

The currently-authenticated application key must have the deleteKeys capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

DeleteBucket Method (BackblazeB2 Control)

Deletes a bucket.

Syntax

backblazeb2control.DeleteBucket BucketId

Remarks

This method deletes the bucket specified by BucketId. A bucket must be completely empty to be deleted.

Note that bucket names are global, and it may not be possible to recreate a deleted bucket if its name is taken by another user in the meantime.

The currently-authenticated application key must have the deleteBuckets capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

DeleteFile Method (BackblazeB2 Control)

Deletes all versions of a file.

Syntax

backblazeb2control.DeleteFile BucketId, FileName

Remarks

This method deletes all versions of the file named FileName from the bucket specified by BucketId. If the latest "version" of the specified file is an incomplete multipart upload, the multipart upload is aborted.

The currently-authenticated application key must have the listFiles and deleteFiles capabilities to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

Note: This method is offered as a convenience, as the Backblaze B2 REST API does not technically provide a way to delete all versions of a file using a single request. When this method is called, the control uses ListFileVersions to obtain a list of all versions of the specified file, and then uses DeleteFileVersion to delete each one, in order from oldest to newest. If any one request made during this process fails, this method will fail immediately. This process does not alter the Files or FileMarker properties, nor does it cause the FileList event to fire.

DeleteFileVersion Method (BackblazeB2 Control)

Deletes a file version.

Syntax

backblazeb2control.DeleteFileVersion FileId

Remarks

This method deletes the file version specified by FileId, regardless of whether said version is an actual file or a hide marker

If the most recent version of a file is deleted, and older versions of the file exist, then the most recent older version will become the "current" version. If said version is a hide marker, then the file will become "hidden"; refer to HideFile for more information.

The currently-authenticated application key must have the deleteFiles capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

DownloadFile Method (BackblazeB2 Control)

Downloads a file by name.

Syntax

backblazeb2control.DownloadFile BucketName, FileName

Remarks

This method downloads the latest version of the file named FileName from the bucket named BucketName. The Range property can optionally be set before calling this method to download a specific range of data from the file.

This method can be used to download files that are owned by other accounts, so long as an appropriate download authorization token and download URL are supplied using the DownloadAuthToken and DownloadURL configuration settings; refer to their documentation for more information.

If LocalFile is set, the file data will be saved to the specified location; otherwise, the file data will be held by FileData.

To download and decrypt an encrypted file, set EncryptionAlgorithm and EncryptionPassword before calling this method.

Download Notes

In the simplest use-case, downloading a file looks like this: b2.LocalFile = "../MyData.zip"; b2.DownloadFile("MyBucket", "data.zip"); // Or, DownloadFileById().

Resuming Downloads

The control also supports resuming failed downloads by using the StartByte property. If a download is interrupted, set StartByte to the appropriate offset before calling this method to resume the download. string downloadFile = "../MyData.zip"; b2.LocalFile = downloadFile; b2.DownloadFile("MyBucket", "data.zip"); // Or, DownloadFileById(). //The transfer is interrupted and DownloadFile() above fails. Later, resume the download: //Get the size of the partially downloaded file b2.StartByte = new FileInfo(downloadFile).Length; b2.DownloadFile("MyBucket", "data.zip"); // Or, DownloadFileById().

Resuming Encrypted File Downloads

Resuming encrypted file downloads is only supported when LocalFile was set in the initial download attempt.

If LocalFile is set when beginning an encrypted download, the control creates a temporary file in TempPath to hold the encrypted data until the download is complete. If the download is interrupted, DownloadTempFile will be populated with the path of the temporary file that holds the partial data.

To resume, DownloadTempFile must be populated, along with StartByte, to allow the remainder of the encrypted data to be downloaded. Once the encrypted data is downloaded it will be decrypted and written to LocalFile. b2.LocalFile = "../MyData.zip"; b2.EncryptionPassword = "password"; b2.DownloadFile("MyBucket", "data.zip"); // Or, DownloadFileById(). //The transfer is interrupted and DownloadFile() above fails. Later, resume the download: //Get the size of the partially downloaded temp file b2.StartByte = new FileInfo(b2.Config("DownloadTempFile")).Length; b2.DownloadFile("MyBucket", "data.zip"); // Or, DownloadFileById().

The currently-authenticated application key must have the readFiles capability (unless the bucket is public) to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

DownloadFileById Method (BackblazeB2 Control)

Downloads a file by Id.

Syntax

backblazeb2control.DownloadFileById FileId

Remarks

This method downloads the file version specified by FileId. The Range property can optionally be set before calling this method to download a specific range of data from the file.

If LocalFile is set, the file data will be saved to the specified location; otherwise, the file data will be held by FileData.

To download and decrypt an encrypted file, set EncryptionAlgorithm and EncryptionPassword before calling this method.

Download Notes

In the simplest use-case, downloading a file looks like this: b2.LocalFile = "../MyData.zip"; b2.DownloadFile("MyBucket", "data.zip"); // Or, DownloadFileById().

Resuming Downloads

The control also supports resuming failed downloads by using the StartByte property. If a download is interrupted, set StartByte to the appropriate offset before calling this method to resume the download. string downloadFile = "../MyData.zip"; b2.LocalFile = downloadFile; b2.DownloadFile("MyBucket", "data.zip"); // Or, DownloadFileById(). //The transfer is interrupted and DownloadFile() above fails. Later, resume the download: //Get the size of the partially downloaded file b2.StartByte = new FileInfo(downloadFile).Length; b2.DownloadFile("MyBucket", "data.zip"); // Or, DownloadFileById().

Resuming Encrypted File Downloads

Resuming encrypted file downloads is only supported when LocalFile was set in the initial download attempt.

If LocalFile is set when beginning an encrypted download, the control creates a temporary file in TempPath to hold the encrypted data until the download is complete. If the download is interrupted, DownloadTempFile will be populated with the path of the temporary file that holds the partial data.

To resume, DownloadTempFile must be populated, along with StartByte, to allow the remainder of the encrypted data to be downloaded. Once the encrypted data is downloaded it will be decrypted and written to LocalFile. b2.LocalFile = "../MyData.zip"; b2.EncryptionPassword = "password"; b2.DownloadFile("MyBucket", "data.zip"); // Or, DownloadFileById(). //The transfer is interrupted and DownloadFile() above fails. Later, resume the download: //Get the size of the partially downloaded temp file b2.StartByte = new FileInfo(b2.Config("DownloadTempFile")).Length; b2.DownloadFile("MyBucket", "data.zip"); // Or, DownloadFileById().

The currently-authenticated application key must have the readFiles capability (unless the bucket is public) to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

GetBucketInfo Method (BackblazeB2 Control)

Gets a bucket's information and metadata.

Syntax

backblazeb2control.GetBucketInfo BucketId

Remarks

This method gets information and metadata for the bucket specified by BucketId.

Calling this method will fire the BucketList and MetadataList events, and will re-populate the Buckets and Metadata collection properties.

The currently-authenticated application key must have the listBuckets capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

GetDownloadAuthToken Method (BackblazeB2 Control)

Create a download authorization token for one or more files in a bucket.

Syntax

backblazeb2control.GetDownloadAuthToken AllowedBucketId, AllowedPrefix, ValidityDuration

Remarks

This method creates and returns a download authorization token for the files in the bucket specified by AllowedBucketId whose names start with AllowedPrefix. The newly-created token will remain valid for the number of seconds specified by ValidityDuration, which must be a value in the range 1 to 604800 (1 week), inclusive.

Download authorization tokens created using this method can be used by anybody to download an applicable file by name; they cannot be used to download a file by Id. Refer to the DownloadFile method for more information.

The currently-authenticated application key must have the shareFiles capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

GetFileInfo Method (BackblazeB2 Control)

Gets a file's information and metadata.

Syntax

backblazeb2control.GetFileInfo FileId

Remarks

This method gets information and metadata for the file version specified by FileId (which must be a real file version, or a hide marker, not a multipart upload).

Calling this method will fire the FileList and MetadataList events, and will re-populate the Files and Metadata collection properties.

The currently-authenticated application key must have the readFiles capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

HideFile Method (BackblazeB2 Control)

Hides a file.

Syntax

backblazeb2control.HideFile BucketId, FileName

Remarks

This method hides the file named FileName in the bucket specified by BucketId by creating a special version of the file called a hide marker.

If the latest version of a file is a hide marker, then the file will not appear in the results returned by ListFiles, nor can it be downloaded by name using DownloadFile. However:

• Any version of the file (excluding hide markers) can still be downloaded directly using DownloadFileById.
• All versions of the file can still be deleted, either all at once using DeleteFile, or individually using DeleteFileVersion.
• All versions of the file will still appear in the results returned by ListFileVersions, and can still be queried individually using GetFileInfo.

To unhide a file, simply delete the hide marker using DeleteFileVersion.

The currently-authenticated application key must have the writeFiles capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

Interrupt Method (BackblazeB2 Control)

This method interrupts the current method.

Syntax

backblazeb2control.Interrupt 

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ListAppKeys Method (BackblazeB2 Control)

Lists the account's application keys.

Syntax

backblazeb2control.ListAppKeys 

Remarks

This method lists the application keys associated with the account. Note that the account's master application key is not included in the results.

Calling this method will fire the AppKeyList event once for each application key, and will also populate the AppKeys properties.

If there are still more application keys available to list when this method returns, the AppKeyMarker property will be populated. Continue to call this method until AppKeyMarker is empty to accumulate all pages of results in the AppKeys properties. Alternatively, the AccumulatePages configuration setting can be disabled to clear the AppKeys properties every time a page of results is returned.

The MaxAppKeyResults configuration setting can be used to control the maximum number of results returned each time this method is called.

The currently-authenticated application key must have the listKeys capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

ListBuckets Method (BackblazeB2 Control)

Lists all buckets in the account.

Syntax

backblazeb2control.ListBuckets 

Remarks

This method lists all buckets in the account.

Calling this method will fire the BucketList event once for each bucket, and will also populate the Buckets properties. If the ListWithMetadata configuration setting is enabled, the MetadataList event will also be fired, once for each metadata item associated with each bucket.

If the currently-authenticated application key is restricted to a specific bucket (indicated by the AccountAllowedBucketId property being non-empty), the results will only include information for that bucket.

The currently-authenticated application key must have the listBuckets capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

ListFiles Method (BackblazeB2 Control)

Lists the files in a bucket.

Syntax

backblazeb2control.ListFiles BucketId

Remarks

This method lists the files in the bucket specified by BucketId.

Before calling this method, the Prefix property may be set in order to restrict the results to only the files whose names begin with the a given string. The Delimiter property can also be used to further tune the results returned. The MaxResults configuration setting may also be used to limit the number of results returned.

If the currently-authenticated application key is restricted to a specific file name prefix (indicated by the AccountAllowedPrefix property being non-empty), then the Prefix property will automatically be set to that prefix if it is empty when this method is called.

Calling this method will fire the FileList event once for each file, and will also populate the Files properties. If the ListWithMetadata configuration setting is enabled, the MetadataList event will also be fired, once for each metadata item associated with each file.

If there are still more files available to list when this method returns, the FileMarker property will be populated. Continue to call this method until FileMarker is empty to accumulate all pages of results in the Files properties. Alternatively, the AccumulatePages configuration setting can be disabled to clear the Files properties every time a page of results is returned.

The currently-authenticated application key must have the listFiles capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

File Hierarchy Traversal

By using the Delimiter and Prefix properties in tandem, applications can effectively "traverse" a virtual hierarchy of files (or file versions) as if it were a filesystem. For example, assume that files with the following names exist within a bucket:

• MyCompany
• MyCompany/Department1
• MyCompany/Department2
• MyCompany/Department2/EmployeeA
• MyCompany/Department2/EmployeeB

With Delimiter set to /, we can set Prefix to successively "deeper" values before calling ListFiles or ListFileVersions for the following effect:

ListFileVersions Method (BackblazeB2 Control)

Lists the file versions in a bucket.

Syntax

backblazeb2control.ListFileVersions BucketId

Remarks

This method lists the file versions in the bucket specified by BucketId.

Before calling this method, the Prefix property may be set in order to restrict the results to only the file versions whose names begin with the a given string. The Delimiter property can also be used to further tune the results returned. The MaxResults configuration setting may also be used to limit the number of results returned.

If the currently-authenticated application key is restricted to a specific file name prefix (indicated by the AccountAllowedPrefix property being non-empty), then the Prefix property will automatically be set to that prefix if it is empty when this method is called.

Calling this method will fire the FileList event once for each file version, and will also populate the Files properties. If the ListWithMetadata configuration setting is enabled, the MetadataList event will also be fired, once for each metadata item associated with each file version.

If there are still more files versions available to list when this method returns, the VersionMarker property will be populated. Continue to call this method until VersionMarker is empty to accumulate all pages of results in the Files properties. Alternatively, the AccumulatePages configuration setting can be disabled to clear the Files properties every time a page of results is returned.

The currently-authenticated application key must have the listFiles capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

File Hierarchy Traversal

By using the Delimiter and Prefix properties in tandem, applications can effectively "traverse" a virtual hierarchy of files (or file versions) as if it were a filesystem. For example, assume that files with the following names exist within a bucket:

• MyCompany
• MyCompany/Department1
• MyCompany/Department2
• MyCompany/Department2/EmployeeA
• MyCompany/Department2/EmployeeB

With Delimiter set to /, we can set Prefix to successively "deeper" values before calling ListFiles or ListFileVersions for the following effect:

ListMultipartUploads Method (BackblazeB2 Control)

Lists the in-progress multipart uploads in a bucket.

Syntax

backblazeb2control.ListMultipartUploads BucketId

Remarks

This method lists the in-progress multipart uploads in the bucket specified by BucketId.

Before calling this method, the Prefix property may be set in order to restrict the results to only the multipart uploads whose file names begin with the a given string.

If the currently-authenticated application key is restricted to a specific file name prefix (indicated by the AccountAllowedPrefix property being non-empty), then the Prefix property will automatically be set to that prefix if it is empty when this method is called.

Calling this method will fire the FileList event once for each multipart upload, and will also populate the Files properties. If the ListWithMetadata configuration setting is enabled, the MetadataList event will also be fired, once for each metadata item associated with each multipart upload.

The currently-authenticated application key must have the listFiles capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

ListParts Method (BackblazeB2 Control)

Lists a multipart upload's parts.

Syntax

backblazeb2control.ListParts MultipartFileId

Remarks

This method lists the parts that have been created for the multipart file upload specified by MultipartFileId.

Calling this method will fire the PartList event once for each part, and will also populate the Parts properties.

If there are still more parts available to list when this method returns, the PartMarker property will be populated. Continue to call this method until PartMarker is empty to accumulate all pages of results in the Parts properties. Alternatively, the AccumulatePages configuration setting can be disabled to clear the Parts properties every time a page of results is returned.

The MaxPartResults configuration setting can be used to control the maximum number of results returned each time this method is called.

The currently-authenticated application key must have the writeFiles capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

Reset Method (BackblazeB2 Control)

Resets the control to its initial state.

Syntax

backblazeb2control.Reset 

Remarks

This method resets the control to its initial state.

SendCustomRequest Method (BackblazeB2 Control)

Sends a custom request to the Backblaze B2 API.

Syntax

backblazeb2control.SendCustomRequest HttpMethod, Operation, RequestBody

Remarks

This method can be used to send arbitrary requests to the Backblaze B2 API.

Valid values for HttpMethod are:

• GET (default if empty)
• HEAD
• POST

The value passed for Operation must be one of the API operations described in the Backblaze B2 REST API documentation (e.g., b2_list_buckets).

Usage

When this method is called, the control does the following:

1. Builds a request URL, including query parameters, as follows:
   • The specified Operation is appended to the base Backblaze B2 API URL (refer to the APIURL configuration setting for more information).
   • All query parameters in the QueryParams properties are added to the request URL.
2. Sends the request using the specified HttpMethod, the request URL built in step 1, the header information built from AccountAuthToken and OtherHeaders, and the given RequestBody (if non-empty).
3. Stores the response headers in the ParsedHeaders properties, and the response body in the specified LocalFile, or ResourceData (using the same logic as DownloadFile).

If the response body is JSON data, the XPath, XText, and other X* configuration settings can then be used to navigate and extract information from it.

StartMultipartUpload Method (BackblazeB2 Control)

Starts a new multipart upload.

Syntax

backblazeb2control.StartMultipartUpload BucketId, FileName

Remarks

This method starts a new multipart upload for a file named FileName in the bucket specified by BucketId, and returns the Id of the newly-created multipart upload. This Id can then be used to call the following methods:

• UploadPart
• CopyPart
• ListParts
• CompleteMultipartUpload
• AbortMultipartUpload

FileName is subject to the same restrictions described in the UploadFile method's documentation; refer to it for more information. If a file named FileName already exists in the destination bucket, a new version of it is created.

The following information is also included in the request, and will be applied to the final file when the multipart upload is completed with CompleteMultipartUpload:

• All metadata items present in the Metadata properties. Keep in mind that the server enforces a limit of 10 metadata items per file.
• If the ClientModifiedTime configuration setting is non-empty: an additional metadata item with its value (which does count towards the 10 item limit).
• The value of the ContentType property.

Multipart uploads never expire, they must be explicitly completed or aborted using CompleteMultipartUpload or AbortMultipartUpload. The ListMultipartUploads method can be used to retrieve a list of current multipart uploads.

The currently-authenticated application key must have the writeFiles capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

UpdateBucket Method (BackblazeB2 Control)

Updates a bucket's kind and/or metadata.

Syntax

backblazeb2control.UpdateBucket BucketId, NewKind, NewMetadata

Remarks

This method updates the kind and/or metadata of the bucket specified by BucketId.

If NewKind is non-empty, it must be allPrivate or allPublic. If NewKind is empty, the bucket's kind remains unchanged.

If NewMetadata is , the bucket's current metadata items are replaced with those in the Metadata properties (or cleared, if said properties are empty). If NewMetadata is , the bucket's current metadata remains unchanged. Keep in mind that the server enforces a limit of 10 metadata items per bucket.

If NewKind is empty and NewMetadata is false, this method does nothing.

The IfRevision setting can optionally be set before calling this method to ensure that the requested changes are only made if the bucket's current revision matches the given one.

The currently-authenticated application key must have the writeBuckets capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

UploadFile Method (BackblazeB2 Control)

Uploads a file.

Syntax

backblazeb2control.UploadFile BucketId, FileName

Remarks

This method uploads a new file named FileName to the bucket specified by BucketId, and returns the Id of the newly-created file.

The value passed for FileName must comply with the following restrictions:

• Cannot contain non-printable or DEL characters (i.e., character codes below 32 or equal to 127, respectively).
• Cannot contain backslashes (\).
• Cannot begin or end with a slash (/), and cannot contain two subsequent slashes (//).
• No segment (i.e., a part between slashes) can be more than 250 bytes long (when UTF-8 encoded).
• The overall string can be no more than 1024 bytes long overall (when UTF-8 encoded).

If a file with the specified FileName already exists in the destination bucket, a new version of it is created.

The following information is also included in the request, and will be applied to the newly-created file:

• All metadata items present in the Metadata properties. Keep in mind that the server enforces a limit of 10 metadata items per file.
• If the ClientModifiedTime configuration setting is non-empty: an additional metadata item with its value (which does count towards the 10 item limit).
• The value of the ContentType property.

If LocalFile is set the file will be uploaded from the specified path. If LocalFile is not set the data in FileData will be used.

To encrypt the file before uploading it, set EncryptionAlgorithm and EncryptionPassword.

The currently-authenticated application key must have the writeFiles capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

Automatic Multipart Uploads

If more than SimpleUploadLimit bytes of data are provided, the control will automatically perform a multipart upload by splitting the data up into parts (sized according to the FragmentSize configuration setting) and uploading them individually. To accomplish this, the control automatically makes calls to StartMultipartUpload, UploadPart, and CompleteMultipartUpload internally; tracks upload state information using the ResumableUploadState configuration setting; and tracks how much data has been uploaded using the StartByte property. The FragmentComplete event will fire after each part is uploaded.

If, during an automatic multipart upload, any individual request fails, the upload can be resumed be calling this method again with the same parameters, so long as ResumableUploadState and StartByte contain the same values as they did when the upload was interrupted.

When an automatic multipart upload completes successfully, ResumableUploadState is cleared and StartByte is reset to 0.

UploadPart Method (BackblazeB2 Control)

Uploads a multipart upload part.

Syntax

backblazeb2control.UploadPart MultipartFileId, PartNumber

Remarks

This method uploads a new part for the multipart file upload specified by MultipartFileId. The part's number is specified by PartNumber; it must be a value in the range 1 to 10000, inclusive. If the specified multipart upload already has a part with the given PartNumber, it is replaced with the one created by this request.

The data to upload is taken from either LocalFile or FileData (whichever data is found in first, when checked in that order). All parts must be between 5MB and 5GB in size (except for the last part, which can be as small as 1 byte).

The currently-authenticated application key must have the writeFiles capability to call this method successfully, otherwise the server will return an error. Refer to the AccountCapabilities property for more information.

AppKeyList Event (BackblazeB2 Control)

Fires once for each application key returned when listing application keys.

Syntax

Sub backblazeb2control_AppKeyList(KeyId As String, KeyName As String, Capabilities As String, AllowedBucketId As String, AllowedPrefix As String, ExpirationTime As Long64)

Remarks

This event fires once for each application key returned when ListAppKeys is called.

KeyId reflects the unique Id of the application key.

KeyName reflects the name that was given to the application key when it was created.

Capabilities reflects the capabilities that the application key has. It is formatted as a comma-separated list of one or more of the following:

AllowedBucketId reflects the Id of the bucket that the application key is restricted to. It will be empty if the application key is not restricted to any specific bucket.

AllowedPrefix reflects the file name prefix that the application key is restricted to. It will be empty if the application key is not restricted to a specific file name prefix.

ExpirationTime reflects the expiration time of the application key, in milliseconds relative to the Unix epoch. It will be -1 if the application key does not expire.

BucketList Event (BackblazeB2 Control)

Fires once for each bucket returned when listing buckets.

Syntax

Sub backblazeb2control_BucketList(Id As String, Name As String, Kind As String, Revision As Long64)

Remarks

This event fires once for each bucket returned when ListBuckets is called.

Id reflects the unique Id of the bucket.

Name reflects the name of the bucket.

Kind reflects the bucket's kind. Possible values are allPublic, allPrivate, or snapshot.

Revision reflects the bucket's revision number. A bucket's revision number is updated every time the bucket is modified.

EndTransfer Event (BackblazeB2 Control)

This event fires when a document finishes transferring.

Syntax

Sub backblazeb2control_EndTransfer(Direction As Integer)

Remarks

The EndTransfer event is fired when the document text finishes transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Error Event (BackblazeB2 Control)

Fired when information is available about errors during data delivery.

Syntax

Sub backblazeb2control_Error(ErrorCode As Integer, Description As String)

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the control fails with an error.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

FileList Event (BackblazeB2 Control)

Fires once for each file returned when listing files.

Syntax

Sub backblazeb2control_FileList(Id As String, Name As String, BucketId As String, Size As Long64, ContentType As String, CreatedTime As Long64, ModifiedTime As Long64, Kind As String, SHA1Hash As String)

Remarks

This event fires once for each file returned when ListFiles, ListFileVersions, or ListMultipartUploads is called.

Id reflects the Id of the file. Always empty when Kind is folder.

Name reflects the name of the file.

BucketId reflects the Id of the bucket that the file is in.

Size reflects the size of the file, in bytes. Always 0 when Kind is folder, hide, or start.

ContentType reflects the content type of the file. Always application/x-bz-hide-marker when Kind is hide; and empty when Kind is folder.

CreatedTime reflects the file's creation time, in milliseconds relative to the Unix epoch. Always 0 when Kind is folder.

ModifiedTime reflects the file's last modified time, in milliseconds relative to the Unix epoch. (Note that this parameter will only be populated if a src_last_modified_millis metadata item is included for the file, and if that metadata item's value can be parsed as a 64-bit integer; otherwise, it will be -1. Refer to the ClientModifiedTime configuration setting for more information.)

Kind reflects the file's kind. Possible values are:

SHA1Hash reflects a hex-encoded SHA1 hash of the file's contents, or empty string if such a hash is not available. Always empty when Kind is folder or hide.

FragmentComplete Event (BackblazeB2 Control)

Fires after each part in an automatic multipart upload is complete.

Syntax

Sub backblazeb2control_FragmentComplete(FragmentNumber As Integer, FragmentCount As Integer, Interrupt As Boolean)

Remarks

If, when UploadFile is called, more than SimpleUploadLimit bytes of upload data are present, the control will automatically split the upload data up into parts and perform a multipart upload. During the overall upload process, this event will fire after each part is uploaded, providing an indication of overall upload progress.

FragmentNumber is the number of the current part that has completed. This value starts at 1.

FragmentCount is the total number of parts that will be uploaded.

Interrupt can be set to to interrupt the upload. The upload may be resumed later.

Refer to UploadFile for more information.

Header Event (BackblazeB2 Control)

Fired every time a header line comes in.

Syntax

Sub backblazeb2control_Header(Field As String, Value As String)

Remarks

The Field parameter contains the name of the HTTP header (which is the same as it is delivered). The Value parameter contains the header contents.

If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).

Log Event (BackblazeB2 Control)

Fired once for each log message.

Syntax

Sub backblazeb2control_Log(LogLevel As Integer, Message As String, LogType As String)

Remarks

This event is fired once for each log message generated by the control. The verbosity is controlled by the LogLevel setting.

LogLevel indicates the level of message. Possible values are as follows:

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

Message is the log entry.

LogType identifies the type of log entry. Possible values are as follows:

• "Info"
• "RequestHeaders"
• "ResponseHeaders"
• "RequestBody"
• "ResponseBody"
• "ProxyRequest"
• "ProxyResponse"
• "FirewallRequest"
• "FirewallResponse"

MetadataList Event (BackblazeB2 Control)

Fires once for each metadata item returned when bucket or file information and metadata is retrieved.

Syntax

Sub backblazeb2control_MetadataList(BucketId As String, FileId As String, Name As String, Value As String)

Remarks

This event fires once for each metadata item returned when GetBucketInfo or GetFileInfo is called. If the ListWithMetadata configuration setting is enabled, it also fires as metadata for each individual bucket or file is returned when ListBuckets, ListFiles, ListFileVersions, or ListMultipartUploads is called.

BucketId reflects the Id of the bucket that the file is in (if FileId is non-empty), or that the metadata item is associated with (if FileId is empty).

FileId, if non-empty, reflects the Id of the file that the metadata item is associated with.

Name reflects the name of the metadata item.

Value reflects the value of the metadata item.

PartList Event (BackblazeB2 Control)

Fires once for each part returned when listing a multipart upload's parts.

Syntax

Sub backblazeb2control_PartList(PartNumber As Integer, MultipartFileId As String, Size As Long64, CreatedTime As Long64, SHA1Hash As String)

Remarks

This event fires once for each part returned when ListParts is called.

PartNumber reflects the part's number.

MultipartFileId reflects the Id of the multipart file upload that the part is a part of.

Size reflects the size of the part, in bytes.

CreatedTime reflects the part's creation time (i.e., upload time), in milliseconds relative to the Unix epoch.

SHA1Hash reflects a hex-encoded SHA1 hash of the part's contents.

Progress Event (BackblazeB2 Control)

Fires during an upload or download to indicate transfer progress.

Syntax

Sub backblazeb2control_Progress(Direction As Integer, BytesTransferred As Long64, TotalBytes As Long64, PercentDone As Integer)

Remarks

This event fires during an upload or download to indicate the progress of the transfer of the entire request. By default, this event will fire each time PercentDone increases by one percent; the ProgressStep configuration setting can be used to alter this behavior.

Direction indicates whether the transfer is an upload (0) or a download (1).

BytesTransferred reflects the number of bytes that have been transferred so far, or 0 if the transfer is starting (however, see note below).

TotalBytes reflects the total number of bytes that are to be transferred, or -1 if the total is unknown. This amount includes the size of everything in the request like HTTP headers.

PercentDone reflects the overall progress of the transfer, or -1 if the progress cannot be calculated.

Note: By default, the control tracks transfer progress absolutely. If a transfer is interrupted and later resumed, the values reported by this event upon and after resumption will account for the data that was transferred before the interruption.

For example, if 10MB of data was successfully transferred before the interruption, then this event will fire with a BytesTransferred value of 10485760 (10MB) when the transfer is first resumed, and then continue to fire with successively greater values as usual.

This behavior can be changed by disabling the ProgressAbsolute configuration setting, in which case the control will treat resumed transfers as "new" transfers. In this case, the BytesTransferred parameter will always be 0 the first time this event fires, regardless of whether the transfer is new or being resumed.

SSLServerAuthentication Event (BackblazeB2 Control)

Fired after the server presents its certificate to the client.

Syntax

Sub backblazeb2control_SSLServerAuthentication(CertEncoded As String, CertSubject As String, CertIssuer As String, Status As String, Accept As Boolean)

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (BackblazeB2 Control)

Fired when secure connection progress messages are available.

Syntax

Sub backblazeb2control_SSLStatus(Message As String)

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

StartTransfer Event (BackblazeB2 Control)

This event fires when a document starts transferring (after the headers).

Syntax

Sub backblazeb2control_StartTransfer(Direction As Integer)

Remarks

The StartTransfer event is fired when the document text starts transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Transfer Event (BackblazeB2 Control)

Fired while a document transfers (delivers document).

Syntax

Sub backblazeb2control_Transfer(Direction As Integer, BytesTransferred As Long64, PercentDone As Integer, Text As String)

Remarks

The Text parameter contains the portion of the document text being received. It is empty if data are being posted to the server.

The BytesTransferred parameter contains the number of bytes transferred in this Direction since the beginning of the document text (excluding HTTP response headers).

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Config Settings (BackblazeB2 Control)

BackblazeB2 Config Settings

<firstlevel>
  <one>value</one>
  <two>
    <item>first</item>
    <item>second</item>
  </two>
  <three>value three</three>
</firstlevel>

{
  "firstlevel": {
    "one": "value",
    "two": ["first", "second"],
    "three": "value three"
  }
}

HTTP Config Settings

TCPClient Config Settings