SAML Component
Properties Methods Events Config Settings Errors
The SAML component is used to obtain security tokens and assertions.
Syntax
TipaSAML
Remarks
The SAML component provides an easy-to-use interface to obtain security tokens and assertions. The component can also be used to parse assertions and inspect the claims within.
The component has built in support for working with Microsoft SharePoint Online and Microsoft Dynamics CRM Online. This support means only a minimum of information needs to be supplied to the component.
Microsoft SharePoint Online and Dynamics CRM Online
To begin working with SharePoint Online or Dynamics CRM Online first set the AuthMode to the appropriate value. The component will automatically populate several properties to known values. Set the User, Password, ApplicationURN properties and call GetSecurityToken. For instance:
component.AuthMode = SAMLAuthModes.amDynamicsCRM; //dynamic crm
component.User = "user@mycrm.onmicrosoft.com";
component.Password = "password";
component.ApplicationURN = "urn:crmapac:dynamics.com";
component.GetSecurityToken();
After calling GetSecurityToken the SecurityTokenXML property will be populated.
ADFS and Others
When working with ADFS or another Security Token Service (STS) the GetAssertion method may be used to obtain an assertion. To begin set AuthMode to either amADFS or amCustom. Then set LocalSTS, User, Password, and ApplicationURN. For instance:
component.AuthMode = SAMLAuthModes.amADFS;
component.User = "administrator";
component.Password = "admin";
component.LocalSTS = "https://adfs.contoso.com";
component.ApplicationURN = "https://fsweb.contoso.com/ClaimsAwareWebAppWithManagedSTS/";
component.GetAssertion();
If the assertion is signed the component will use the certificate specified in SignerCert
to verify the signature. If SignerCert is not set the component will attempt to parse
the certificate present in the assertion to perform verification.
After the assertion is parsed and the signature is verified (if present) the following properties will be populated:
- AssertionId
- AssertionIssueInstant
- AssertionIssuer
- AssertionNotBefore
- AssertionNotOnOrAfter
- AssertionSubject
- AssertionVersion
- AssertionXML
- Claim* properties
Parsing an Assertion
The component may also be used to parse an existing assertion without contacting a STS. To parse an existing assertion call ParseAssertion with the assertion XML. If the assertion is signed the component will use the certificate specified in SignerCert to verify the signature. If SignerCert is not set the component will attempt to parse the certificate present in the assertion to perform verification.
After the assertion is parsed and the signature is verified (if present) the following properties will be populated:
- AssertionId
- AssertionIssueInstant
- AssertionIssuer
- AssertionNotBefore
- AssertionNotOnOrAfter
- AssertionSubject
- AssertionVersion
- AssertionXML
- Claim* properties
Property List
The following is the full list of the properties of the component with short descriptions. Click on the links for further details.
ApplicationURN | The application's Uniform Resource Name (URN). |
AssertionId | The assertion id. |
AssertionIssueInstant | The time in UTC that the assertion was issued. |
AssertionIssuer | The assertion issuer. |
AssertionNotBefore | The date on which the assertion becomes valid. |
AssertionNotOnOrAfter | The time at which the assertion expires. |
AssertionSubject | The subject of the assertion. |
AssertionVersion | The version of the assertion. |
AssertionXML | The assertion XML. |
AuthMode | The authentication mode. |
CertEncoded | This is the certificate (PEM/base64 encoded). |
CertStore | This is the name of the certificate store for the client certificate. |
CertStorePassword | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
CertStoreType | This is the type of certificate store for this certificate. |
CertSubject | This is the subject of the certificate used for client authentication. |
ClaimCount | The number of records in the Claim arrays. |
ClaimIssuerName | The name of the issuer. |
ClaimOriginalIssuer | The name of the original issuer. |
ClaimPropertyCount | The number of properties in the claim. |
ClaimPropertyIndex | Selects a property. |
ClaimPropertyName | The name of the property. |
ClaimPropertyValue | The value of the property. |
ClaimTypeName | The type name of the claim. |
ClaimValue | The value of the claim. |
ClaimValueType | The type of value. |
FederationSTS | The URL of the federation Security Token Service (STS). |
FederationURN | The federation Uniform Resource Name (URN). |
LocalSTS | The local Security Token Service (STS). |
Password | The user's password. |
ProxyAuthScheme | This property is used to tell the component which type of authorization to perform when connecting to the proxy. |
ProxyAutoDetect | This property tells the component whether or not to automatically detect and use proxy system settings, if available. |
ProxyPassword | This property contains a password if authentication is to be used for the proxy. |
ProxyPort | This property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80). |
ProxyServer | If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified. |
ProxySSL | This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. |
ProxyUser | This property contains a user name, if authentication is to be used for the proxy. |
SecurityTokenXML | The security token XML. |
SignerCertEncoded | This is the certificate (PEM/base64 encoded). |
SignerCertStore | This is the name of the certificate store for the client certificate. |
SignerCertStorePassword | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
SignerCertStoreType | This is the type of certificate store for this certificate. |
SignerCertSubject | This is the subject of the certificate used for client authentication. |
SSLAcceptServerCertEncoded | This is the certificate (PEM/base64 encoded). |
SSLCertEncoded | This is the certificate (PEM/base64 encoded). |
SSLCertStore | This is the name of the certificate store for the client certificate. |
SSLCertStorePassword | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
SSLCertStoreType | This is the type of certificate store for this certificate. |
SSLCertSubject | This is the subject of the certificate used for client authentication. |
SSLProvider | This specifies the SSL/TLS implementation to use. |
SSLServerCertEncoded | This is the certificate (PEM/base64 encoded). |
User | The username. |
AttrCount | The number of records in the Attr arrays. |
AttrName | The Name provides the local name (without prefix) of the attribute. |
AttrNamespace | Attribute namespace. |
AttrPrefix | Attribute prefix (if any). |
AttrValue | Attribute value. |
XChildCount | The number of records in the XChild arrays. |
XChildName | The Name property provides the local name (without prefix) of the element. |
XChildNamespace | Namespace of the element. |
XChildPrefix | Prefix of the element (if any). |
XChildXText | The inner text of the element. |
XElement | The name of the current element. |
XNamespace | The namespace of the current element. |
XParent | The parent of the current element. |
XPath | Provides a way to point to a specific element in the document. |
XPrefix | The prefix of the current element. |
XSubTree | A snapshot of the current element in the document. |
XText | The text of the current element. |
Method List
The following is the full list of the methods of the component with short descriptions. Click on the links for further details.
Config | Sets or retrieves a configuration setting. |
GetAssertion | Gets the assertion. |
GetSecurityToken | Gets the security token. |
ParseAssertion | Parses the specified assertion. |
Event List
The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.
Characters | Fired for plain text segments of the input stream. |
Comment | Fired when a comment section is encountered. |
EndElement | Fired when an end-element tag is encountered. |
Error | Information about errors during data delivery. |
PI | Fired when a processing instruction section is encountered. |
SSLServerAuthentication | Fired after the server presents its certificate to the client. |
SSLStatus | Shows the progress of the secure connection. |
StartElement | Fired when a begin-element tag is encountered in the document. |
Config Settings
The following is a list of config settings for the component with short descriptions. Click on the links for further details.
AssertionAudienceCount | Specifies the number of Audience elements found in the assertion. |
AssertionAudienceValue[i] | Contains the audience value at the specified index. |
AssertionXPath | The XPath to the assertion. |
AssertionXPath | The XPath to the assertion. |
DecryptAssertion | Whether to decrypt the assertion. |
EncryptedAssertionXPath | The XPath to the encrypted assertion. |
RawRequest | Returns the raw HTTP request. |
RawResponse | Returns the raw HTTP response. |
UserRealm | The URL of a web service to determine the LocalSTS (if any). |
BuildInfo | Information about the product's build. |
CodePage | The system code page used for Unicode to Multibyte translations. |
LicenseInfo | Information about the current license. |
MaskSensitive | Whether sensitive data is masked in log messages. |
UseFIPSCompliantAPI | Tells the component whether or not to use FIPS certified APIs. |
UseInternalSecurityAPI | Tells the component whether or not to use the system security libraries or an internal implementation. |
ApplicationURN Property (SAML Component)
The application's Uniform Resource Name (URN).
Syntax
__property String ApplicationURN = { read=FApplicationURN, write=FSetApplicationURN };
Default Value
""
Remarks
This property specifies the application's Uniform Resource Name (URN). This must be set before calling GetAssertion or GetSecurityToken.
When AuthMode is set to amDynamicsCRM the value specified here depends on the location of the account. Valid values are:
Dynamics CRM Location | URN |
North America | urn:crmna:dynamics.com |
EMEA | urn:crmemea:dynamics.com |
APAC | urn:crmapac:dynamics.com |
When AuthMode is set to camSharePointOnline this value is typically the URL to your site. For instance: "https://mycrm.sharepoint.com".
This property is not available at design time.
Data Type
String
AssertionId Property (SAML Component)
The assertion id.
Syntax
__property String AssertionId = { read=FAssertionId };
Default Value
""
Remarks
This property hold the id of the assertion.
This property is read-only and not available at design time.
Data Type
String
AssertionIssueInstant Property (SAML Component)
The time in UTC that the assertion was issued.
Syntax
__property String AssertionIssueInstant = { read=FAssertionIssueInstant };
Default Value
""
Remarks
This property holds the time that the assertion was issued.
This is in the standard xsd:dateTime format "YYYY-MM-DDThh:mm:ss". The date is specified in UTC.
This property is read-only and not available at design time.
Data Type
String
AssertionIssuer Property (SAML Component)
The assertion issuer.
Syntax
__property String AssertionIssuer = { read=FAssertionIssuer };
Default Value
""
Remarks
This property holds the issuer of the assertion.
This property is read-only and not available at design time.
Data Type
String
AssertionNotBefore Property (SAML Component)
The date on which the assertion becomes valid.
Syntax
__property String AssertionNotBefore = { read=FAssertionNotBefore };
Default Value
""
Remarks
This property specifies the earliest time instant at which the assertion is valid.
This is in the standard xsd:dateTime format "YYYY-MM-DDThh:mm:ss". The date is specified in UTC.
This property is read-only and not available at design time.
Data Type
String
AssertionNotOnOrAfter Property (SAML Component)
The time at which the assertion expires.
Syntax
__property String AssertionNotOnOrAfter = { read=FAssertionNotOnOrAfter };
Default Value
""
Remarks
This property specifies the time instant at which the assertion has expired.
This is in the standard xsd:dateTime format "YYYY-MM-DDThh:mm:ss". The date is specified in UTC.
This property is read-only and not available at design time.
Data Type
String
AssertionSubject Property (SAML Component)
The subject of the assertion.
Syntax
__property String AssertionSubject = { read=FAssertionSubject };
Default Value
""
Remarks
This property holds the subject of the assertion.
This property is read-only and not available at design time.
Data Type
String
AssertionVersion Property (SAML Component)
The version of the assertion.
Syntax
__property TipaSAMLAssertionVersions AssertionVersion = { read=FAssertionVersion, write=FSetAssertionVersion };
enum TipaSAMLAssertionVersions { svSAMLv11=0, svSAMLv20=1 };
Default Value
svSAMLv11
Remarks
This property specifies the version of the assertion. This may be set before calling GetAssertion. This will be populated after calling ParseAssertion. Possible values are:
0 (svSAMLv11 - default) | SAML version 1.1 |
1 (svSAMLv20) | SAML version 2.0 |
This property is not available at design time.
Data Type
Integer
AssertionXML Property (SAML Component)
The assertion XML.
Syntax
__property String AssertionXML = { read=FAssertionXML };
Default Value
""
Remarks
This property holds the returned assertion. This is populated after calling GetAssertion.
This property is read-only and not available at design time.
Data Type
String
AuthMode Property (SAML Component)
The authentication mode.
Syntax
__property TipaSAMLAuthModes AuthMode = { read=FAuthMode, write=FSetAuthMode };
enum TipaSAMLAuthModes { camSharePointOnline=0, camDynamicsCRM=1, camADFS=2, camCustom=3 };
Default Value
camSharePointOnline
Remarks
This property specifies the authentication mode. Possible values are:
0 (camSharePointOnline - default) | Microsoft SharePoint Online |
1 (camDynamicsCRM) | Microsoft Dynamics CRM |
2 (camADFS) | Active Directory Federation Services |
3 (camCustom) | Custom |
When this property is set the component is initialized based on common settings for the selected mode.
Setting this property to 2 (camADFS) or 3 (camCustom) will clear the values in FederationURN, and FederationSTS. There is no functional difference between 2 (camADFS) and 3 (camCustom), they operate identically.
Setting this property to 0 (camSharePointOnline) or 1 (camDynamicsCRM) will populate FederationURN, and FederationSTS with known valid values for FederationURN, and FederationSTS.
The table below shows which properties are set depending on the value of this property.
AuthMode | FederationURN | FederationSTS | UserRealm |
camSharePointOnline | urn:federation:MicrosoftOnline | "https://login.microsoftonline.com/RST2.srf" | "https://login.microsoftonline.com/GetUserRealm.srf" |
camDynamicsCRM | urn:federation:MicrosoftOnline | "https://login.microsoftonline.com/RST2.srf" | "https://login.microsoftonline.com/GetUserRealm.srf" |
camADFS | "" | "" | "" |
camCustom | "" | "" | "" |
The value 3 (camCustom) may be used with any STS as long as WS-TRUST is supported.
This property is not available at design time.
Data Type
Integer
CertEncoded Property (SAML Component)
This is the certificate (PEM/base64 encoded).
Syntax
__property String CertEncoded = { read=FCertEncoded, write=FSetCertEncoded }; __property DynamicArray<Byte> CertEncodedB = { read=FCertEncodedB, write=FSetCertEncodedB };
Default Value
""
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The CertStore and CertSubject properties also may be used to specify a certificate.
When CertEncoded is set, a search is initiated in the current CertStore for the private key of the certificate. If the key is found, CertSubject is updated to reflect the full subject of the selected certificate; otherwise, CertSubject is set to an empty string.
This property is not available at design time.
Data Type
Byte Array
CertStore Property (SAML Component)
This is the name of the certificate store for the client certificate.
Syntax
__property String CertStore = { read=FCertStore, write=FSetCertStore }; __property DynamicArray<Byte> CertStoreB = { read=FCertStoreB, write=FSetCertStoreB };
Default Value
"MY"
Remarks
This is the name of the certificate store for the client certificate.
The CertStoreType property denotes the type of the certificate store specified by CertStore. If the store is password protected, specify the password in CertStorePassword.
CertStore is used in conjunction with the CertSubject property to specify client certificates. If CertStore has a value, and CertSubject or CertEncoded is set, a search for a certificate is initiated. Please see the CertSubject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
This property is not available at design time.
Data Type
Byte Array
CertStorePassword Property (SAML Component)
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Syntax
__property String CertStorePassword = { read=FCertStorePassword, write=FSetCertStorePassword };
Default Value
""
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
This property is not available at design time.
Data Type
String
CertStoreType Property (SAML Component)
This is the type of certificate store for this certificate.
Syntax
__property TipaSAMLCertStoreTypes CertStoreType = { read=FCertStoreType, write=FSetCertStoreType };
enum TipaSAMLCertStoreTypes { cstUser=0, cstMachine=1, cstPFXFile=2, cstPFXBlob=3, cstJKSFile=4, cstJKSBlob=5, cstPEMKeyFile=6, cstPEMKeyBlob=7, cstPublicKeyFile=8, cstPublicKeyBlob=9, cstSSHPublicKeyBlob=10, cstP7BFile=11, cstP7BBlob=12, cstSSHPublicKeyFile=13, cstPPKFile=14, cstPPKBlob=15, cstXMLFile=16, cstXMLBlob=17, cstJWKFile=18, cstJWKBlob=19, cstSecurityKey=20, cstBCFKSFile=21, cstBCFKSBlob=22, cstPKCS11=23, cstAuto=99 };
Default Value
cstUser
Remarks
This is the type of certificate store for this certificate.
The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: this store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr component. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the CertStore and set CertStorePassword to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
This property is not available at design time.
Data Type
Integer
CertSubject Property (SAML Component)
This is the subject of the certificate used for client authentication.
Syntax
__property String CertSubject = { read=FCertSubject, write=FSetCertSubject };
Default Value
""
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
This property is not available at design time.
Data Type
String
ClaimCount Property (SAML Component)
The number of records in the Claim arrays.
Syntax
__property int ClaimCount = { read=FClaimCount };
Default Value
0
Remarks
This property controls the size of the following arrays:
- ClaimIssuerName
- ClaimOriginalIssuer
- ClaimPropertyCount
- ClaimPropertyIndex
- ClaimPropertyName
- ClaimPropertyValue
- ClaimTypeName
- ClaimValue
- ClaimValueType
The array indices start at 0 and end at ClaimCount - 1.
This property is read-only and not available at design time.
Data Type
Integer
ClaimIssuerName Property (SAML Component)
The name of the issuer.
Syntax
__property String ClaimIssuerName[int ClaimIndex] = { read=FClaimIssuerName };
Default Value
""
Remarks
The name of the issuer. This may be a URL like "http://adfs.contoso.com/adfs/services/trust".
The ClaimIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ClaimCount property.
This property is read-only and not available at design time.
Data Type
String
ClaimOriginalIssuer Property (SAML Component)
The name of the original issuer.
Syntax
__property String ClaimOriginalIssuer[int ClaimIndex] = { read=FClaimOriginalIssuer };
Default Value
""
Remarks
The name of the original issuer. This may be a URL like "http://adfs.contoso.com/adfs/services/trust".
The ClaimIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ClaimCount property.
This property is read-only and not available at design time.
Data Type
String
ClaimPropertyCount Property (SAML Component)
The number of properties in the claim.
Syntax
__property int ClaimPropertyCount[int ClaimIndex] = { read=FClaimPropertyCount };
Default Value
0
Remarks
The number of properties in the claim.
The ClaimIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ClaimCount property.
This property is read-only and not available at design time.
Data Type
Integer
ClaimPropertyIndex Property (SAML Component)
Selects a property.
Syntax
__property int ClaimPropertyIndex[int ClaimIndex] = { read=FClaimPropertyIndex, write=FSetClaimPropertyIndex };
Default Value
0
Remarks
Selects a property. This is valid from 0 to ClaimPropertyCount. To inspect a property, first set this property and then inspect ClaimPropertyName and ClaimPropertyValue. For instance:
for(int i=0;i<component.Claims[0].PropertyCount;i++)
{
component.Claims[0].PropertyIndex = i;
Console.WriteLine(component.Claims[0].PropertyName + ": " + component.Claims[0].PropertyValue);
}
The ClaimIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ClaimCount property.
This property is not available at design time.
Data Type
Integer
ClaimPropertyName Property (SAML Component)
The name of the property.
Syntax
__property String ClaimPropertyName[int ClaimIndex] = { read=FClaimPropertyName };
Default Value
""
Remarks
The name of the property.
The ClaimIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ClaimCount property.
This property is read-only and not available at design time.
Data Type
String
ClaimPropertyValue Property (SAML Component)
The value of the property.
Syntax
__property String ClaimPropertyValue[int ClaimIndex] = { read=FClaimPropertyValue };
Default Value
""
Remarks
The value of the property.
The ClaimIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ClaimCount property.
This property is read-only and not available at design time.
Data Type
String
ClaimTypeName Property (SAML Component)
The type name of the claim.
Syntax
__property String ClaimTypeName[int ClaimIndex] = { read=FClaimTypeName };
Default Value
""
Remarks
The type name of the claim. This may be a value like "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier".
The ClaimIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ClaimCount property.
This property is read-only and not available at design time.
Data Type
String
ClaimValue Property (SAML Component)
The value of the claim.
Syntax
__property String ClaimValue[int ClaimIndex] = { read=FClaimValue };
Default Value
""
Remarks
The value of the claim.
The ClaimIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ClaimCount property.
This property is read-only and not available at design time.
Data Type
String
ClaimValueType Property (SAML Component)
The type of value.
Syntax
__property String ClaimValueType[int ClaimIndex] = { read=FClaimValueType };
Default Value
""
Remarks
The type of value. This may be a value like "http://www.w3.org/2001/XMLSchema#string".
The ClaimIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ClaimCount property.
This property is read-only and not available at design time.
Data Type
String
FederationSTS Property (SAML Component)
The URL of the federation Security Token Service (STS).
Syntax
__property String FederationSTS = { read=FFederationSTS, write=FSetFederationSTS };
Default Value
""
Remarks
This property specifies the URL of the federation Security Token Service (STS). When AuthMode is set to 0 (camSharePointOnline) or 1 (camDynamicsCRM) this property is automatically populated.
This property is not available at design time.
Data Type
String
FederationURN Property (SAML Component)
The federation Uniform Resource Name (URN).
Syntax
__property String FederationURN = { read=FFederationURN, write=FSetFederationURN };
Default Value
""
Remarks
This property specifies the federation Uniform Resource Name (URN). This property is automatically populated when AuthMode is set to 0 (camSharePointOnline) or 1 (camDynamicsCRM).
This property is not available at design time.
Data Type
String
LocalSTS Property (SAML Component)
The local Security Token Service (STS).
Syntax
__property String LocalSTS = { read=FLocalSTS, write=FSetLocalSTS };
Default Value
""
Remarks
This property specifies the URL of the local Security Token Service(STS).
When AuthMode is set to 0 (camSharePointOnline) or 1 (camDynamicsCRM) if this is not specified, then the component will attempt to determine this value automatically by querying the UserRealm.
When AuthMode is set to 2 (camADFS) or 3 (camCustom) this property is required.
This property is not available at design time.
Data Type
String
Password Property (SAML Component)
The user's password.
Syntax
__property String Password = { read=FPassword, write=FSetPassword };
Default Value
""
Remarks
This property specifies the user's password. This must be set before calling GetAssertion or GetSecurityToken.
This property is not available at design time.
Data Type
String
ProxyAuthScheme Property (SAML Component)
This property is used to tell the component which type of authorization to perform when connecting to the proxy.
Syntax
__property TipaSAMLProxyAuthSchemes ProxyAuthScheme = { read=FProxyAuthScheme, write=FSetProxyAuthScheme };
enum TipaSAMLProxyAuthSchemes { authBasic=0, authDigest=1, authProprietary=2, authNone=3, authNtlm=4, authNegotiate=5 };
Default Value
authBasic
Remarks
This property is used to tell the component which type of authorization to perform when connecting to the proxy. This is used only when the ProxyUser and ProxyPassword properties are set.
ProxyAuthScheme should be set to authNone (3) when no authentication is expected.
By default, ProxyAuthScheme is authBasic (0), and if the ProxyUser and ProxyPassword properties are set, the component will attempt basic authentication.
If ProxyAuthScheme is set to authDigest (1), digest authentication will be attempted instead.
If ProxyAuthScheme is set to authProprietary (2), then the authorization token will not be generated by the component. Look at the configuration file for the component being used to find more information about manually setting this token.
If ProxyAuthScheme is set to authNtlm (4), NTLM authentication will be used.
For security reasons, setting this property will clear the values of ProxyUser and ProxyPassword.
Data Type
Integer
ProxyAutoDetect Property (SAML Component)
This property tells the component whether or not to automatically detect and use proxy system settings, if available.
Syntax
__property bool ProxyAutoDetect = { read=FProxyAutoDetect, write=FSetProxyAutoDetect };
Default Value
False
Remarks
This property tells the component whether or not to automatically detect and use proxy system settings, if available. The default value is false.
Data Type
Boolean
ProxyPassword Property (SAML Component)
This property contains a password if authentication is to be used for the proxy.
Syntax
__property String ProxyPassword = { read=FProxyPassword, write=FSetProxyPassword };
Default Value
""
Remarks
This property contains a password if authentication is to be used for the proxy.
If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].
If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.
If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.
Data Type
String
ProxyPort Property (SAML Component)
This property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).
Syntax
__property int ProxyPort = { read=FProxyPort, write=FSetProxyPort };
Default Value
80
Remarks
This property contains the Transmission Control Protocol (TCP) port for the proxy ProxyServer (default 80). See the description of the ProxyServer property for details.
Data Type
Integer
ProxyServer Property (SAML Component)
If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.
Syntax
__property String ProxyServer = { read=FProxyServer, write=FSetProxyServer };
Default Value
""
Remarks
If a proxy ProxyServer is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.
If the ProxyServer property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the ProxyServer property is set to the corresponding address. If the search is not successful, an error is returned.
Data Type
String
ProxySSL Property (SAML Component)
This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.
Syntax
__property TipaSAMLProxySSLs ProxySSL = { read=FProxySSL, write=FSetProxySSL };
enum TipaSAMLProxySSLs { psAutomatic=0, psAlways=1, psNever=2, psTunnel=3 };
Default Value
psAutomatic
Remarks
This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:
psAutomatic (0) | Default setting. If the URL is an https URL, the component will use the psTunnel option. If the URL is an http URL, the component will use the psNever option. |
psAlways (1) | The connection is always SSL enabled. |
psNever (2) | The connection is not SSL enabled. |
psTunnel (3) | The connection is made through a tunneling (HTTP) proxy. |
Data Type
Integer
ProxyUser Property (SAML Component)
This property contains a user name, if authentication is to be used for the proxy.
Syntax
__property String ProxyUser = { read=FProxyUser, write=FSetProxyUser };
Default Value
""
Remarks
This property contains a username if authentication is to be used for the proxy.
If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].
If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.
If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.
Data Type
String
SecurityTokenXML Property (SAML Component)
The security token XML.
Syntax
__property String SecurityTokenXML = { read=FSecurityTokenXML };
Default Value
""
Remarks
This property holds the security token. This is populated after calling GetSecurityToken.
This property is read-only and not available at design time.
Data Type
String
SignerCertEncoded Property (SAML Component)
This is the certificate (PEM/base64 encoded).
Syntax
__property String SignerCertEncoded = { read=FSignerCertEncoded, write=FSetSignerCertEncoded }; __property DynamicArray<Byte> SignerCertEncodedB = { read=FSignerCertEncodedB, write=FSetSignerCertEncodedB };
Default Value
""
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SignerCertStore and SignerCertSubject properties also may be used to specify a certificate.
When SignerCertEncoded is set, a search is initiated in the current SignerCertStore for the private key of the certificate. If the key is found, SignerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SignerCertSubject is set to an empty string.
This property is not available at design time.
Data Type
Byte Array
SignerCertStore Property (SAML Component)
This is the name of the certificate store for the client certificate.
Syntax
__property String SignerCertStore = { read=FSignerCertStore, write=FSetSignerCertStore }; __property DynamicArray<Byte> SignerCertStoreB = { read=FSignerCertStoreB, write=FSetSignerCertStoreB };
Default Value
"MY"
Remarks
This is the name of the certificate store for the client certificate.
The SignerCertStoreType property denotes the type of the certificate store specified by SignerCertStore. If the store is password protected, specify the password in SignerCertStorePassword.
SignerCertStore is used in conjunction with the SignerCertSubject property to specify client certificates. If SignerCertStore has a value, and SignerCertSubject or SignerCertEncoded is set, a search for a certificate is initiated. Please see the SignerCertSubject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
This property is not available at design time.
Data Type
Byte Array
SignerCertStorePassword Property (SAML Component)
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Syntax
__property String SignerCertStorePassword = { read=FSignerCertStorePassword, write=FSetSignerCertStorePassword };
Default Value
""
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
This property is not available at design time.
Data Type
String
SignerCertStoreType Property (SAML Component)
This is the type of certificate store for this certificate.
Syntax
__property TipaSAMLSignerCertStoreTypes SignerCertStoreType = { read=FSignerCertStoreType, write=FSetSignerCertStoreType };
enum TipaSAMLSignerCertStoreTypes { cstUser=0, cstMachine=1, cstPFXFile=2, cstPFXBlob=3, cstJKSFile=4, cstJKSBlob=5, cstPEMKeyFile=6, cstPEMKeyBlob=7, cstPublicKeyFile=8, cstPublicKeyBlob=9, cstSSHPublicKeyBlob=10, cstP7BFile=11, cstP7BBlob=12, cstSSHPublicKeyFile=13, cstPPKFile=14, cstPPKBlob=15, cstXMLFile=16, cstXMLBlob=17, cstJWKFile=18, cstJWKBlob=19, cstSecurityKey=20, cstBCFKSFile=21, cstBCFKSBlob=22, cstPKCS11=23, cstAuto=99 };
Default Value
cstUser
Remarks
This is the type of certificate store for this certificate.
The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: this store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr component. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SignerCertStore and set SignerCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
This property is not available at design time.
Data Type
Integer
SignerCertSubject Property (SAML Component)
This is the subject of the certificate used for client authentication.
Syntax
__property String SignerCertSubject = { read=FSignerCertSubject, write=FSetSignerCertSubject };
Default Value
""
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
This property is not available at design time.
Data Type
String
SSLAcceptServerCertEncoded Property (SAML Component)
This is the certificate (PEM/base64 encoded).
Syntax
__property String SSLAcceptServerCertEncoded = { read=FSSLAcceptServerCertEncoded, write=FSetSSLAcceptServerCertEncoded }; __property DynamicArray<Byte> SSLAcceptServerCertEncodedB = { read=FSSLAcceptServerCertEncodedB, write=FSetSSLAcceptServerCertEncodedB };
Default Value
""
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.
When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.
This property is not available at design time.
Data Type
Byte Array
SSLCertEncoded Property (SAML Component)
This is the certificate (PEM/base64 encoded).
Syntax
__property String SSLCertEncoded = { read=FSSLCertEncoded, write=FSetSSLCertEncoded }; __property DynamicArray<Byte> SSLCertEncodedB = { read=FSSLCertEncodedB, write=FSetSSLCertEncodedB };
Default Value
""
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.
When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.
This property is not available at design time.
Data Type
Byte Array
SSLCertStore Property (SAML Component)
This is the name of the certificate store for the client certificate.
Syntax
__property String SSLCertStore = { read=FSSLCertStore, write=FSetSSLCertStore }; __property DynamicArray<Byte> SSLCertStoreB = { read=FSSLCertStoreB, write=FSetSSLCertStoreB };
Default Value
"MY"
Remarks
This is the name of the certificate store for the client certificate.
The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.
SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
Data Type
Byte Array
SSLCertStorePassword Property (SAML Component)
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Syntax
__property String SSLCertStorePassword = { read=FSSLCertStorePassword, write=FSetSSLCertStorePassword };
Default Value
""
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Data Type
String
SSLCertStoreType Property (SAML Component)
This is the type of certificate store for this certificate.
Syntax
__property TipaSAMLSSLCertStoreTypes SSLCertStoreType = { read=FSSLCertStoreType, write=FSetSSLCertStoreType };
enum TipaSAMLSSLCertStoreTypes { cstUser=0, cstMachine=1, cstPFXFile=2, cstPFXBlob=3, cstJKSFile=4, cstJKSBlob=5, cstPEMKeyFile=6, cstPEMKeyBlob=7, cstPublicKeyFile=8, cstPublicKeyBlob=9, cstSSHPublicKeyBlob=10, cstP7BFile=11, cstP7BBlob=12, cstSSHPublicKeyFile=13, cstPPKFile=14, cstPPKBlob=15, cstXMLFile=16, cstXMLBlob=17, cstJWKFile=18, cstJWKBlob=19, cstSecurityKey=20, cstBCFKSFile=21, cstBCFKSBlob=22, cstPKCS11=23, cstAuto=99 };
Default Value
cstUser
Remarks
This is the type of certificate store for this certificate.
The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: this store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr component. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SSLCertStore and set SSLCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
Data Type
Integer
SSLCertSubject Property (SAML Component)
This is the subject of the certificate used for client authentication.
Syntax
__property String SSLCertSubject = { read=FSSLCertSubject, write=FSetSSLCertSubject };
Default Value
""
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
Data Type
String
SSLProvider Property (SAML Component)
This specifies the SSL/TLS implementation to use.
Syntax
__property TipaSAMLSSLProviders SSLProvider = { read=FSSLProvider, write=FSetSSLProvider };
enum TipaSAMLSSLProviders { sslpAutomatic=0, sslpPlatform=1, sslpInternal=2 };
Default Value
sslpAutomatic
Remarks
This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the component will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.
Possible values are:
0 (sslpAutomatic - default) | Automatically selects the appropriate implementation. |
1 (sslpPlatform) | Uses the platform/system implementation. |
2 (sslpInternal) | Uses the internal implementation. |
In most cases using the default value (Automatic) is recommended. The component will select a provider depending on the current platform.
When Automatic is selected the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used.
Data Type
Integer
SSLServerCertEncoded Property (SAML Component)
This is the certificate (PEM/base64 encoded).
Syntax
__property String SSLServerCertEncoded = { read=FSSLServerCertEncoded }; __property DynamicArray<Byte> SSLServerCertEncodedB = { read=FSSLServerCertEncodedB };
Default Value
""
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.
When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.
This property is read-only and not available at design time.
Data Type
Byte Array
User Property (SAML Component)
The username.
Syntax
__property String User = { read=FUser, write=FSetUser };
Default Value
""
Remarks
This property specifies the username. This must be set before calling GetAssertion or GetSecurityToken.
This property is not available at design time.
Data Type
String
AttrCount Property (SAML Component)
The number of records in the Attr arrays.
Syntax
__property int AttrCount = { read=FAttrCount, write=FSetAttrCount };
Default Value
0
Remarks
This property controls the size of the following arrays:
The array indices start at 0 and end at AttrCount - 1.
This property is not available at design time.
Data Type
Integer
AttrName Property (SAML Component)
The Name provides the local name (without prefix) of the attribute.
Syntax
__property String AttrName[int AttrIndex] = { read=FAttrName };
Default Value
""
Remarks
The AttrName provides the local name (without prefix) of the attribute.
The AttrIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AttrCount property.
This property is read-only and not available at design time.
Data Type
String
AttrNamespace Property (SAML Component)
Attribute namespace.
Syntax
__property String AttrNamespace[int AttrIndex] = { read=FAttrNamespace };
Default Value
""
Remarks
Attribute namespace.
The AttrIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AttrCount property.
This property is read-only and not available at design time.
Data Type
String
AttrPrefix Property (SAML Component)
Attribute prefix (if any).
Syntax
__property String AttrPrefix[int AttrIndex] = { read=FAttrPrefix };
Default Value
""
Remarks
Attribute prefix (if any). If the attribute does not have a prefix, this property is empty.
The AttrIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AttrCount property.
This property is read-only and not available at design time.
Data Type
String
AttrValue Property (SAML Component)
Attribute value.
Syntax
__property String AttrValue[int AttrIndex] = { read=FAttrValue };
Default Value
""
Remarks
Attribute value.
The AttrIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AttrCount property.
This property is read-only and not available at design time.
Data Type
String
XChildCount Property (SAML Component)
The number of records in the XChild arrays.
Syntax
__property int XChildCount = { read=FXChildCount, write=FSetXChildCount };
Default Value
0
Remarks
This property controls the size of the following arrays:
The array indices start at 0 and end at XChildCount - 1.
This property is not available at design time.
Data Type
Integer
XChildName Property (SAML Component)
The Name property provides the local name (without prefix) of the element.
Syntax
__property String XChildName[int XChildIndex] = { read=FXChildName };
Default Value
""
Remarks
The XChildName property provides the local name (without prefix) of the element.
The XChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the XChildCount property.
This property is read-only and not available at design time.
Data Type
String
XChildNamespace Property (SAML Component)
Namespace of the element.
Syntax
__property String XChildNamespace[int XChildIndex] = { read=FXChildNamespace };
Default Value
""
Remarks
Namespace of the element.
The XChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the XChildCount property.
This property is read-only and not available at design time.
Data Type
String
XChildPrefix Property (SAML Component)
Prefix of the element (if any).
Syntax
__property String XChildPrefix[int XChildIndex] = { read=FXChildPrefix };
Default Value
""
Remarks
Prefix of the element (if any). If the element does not have a prefix, this property is empty.
The XChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the XChildCount property.
This property is read-only and not available at design time.
Data Type
String
XChildXText Property (SAML Component)
The inner text of the element.
Syntax
__property String XChildXText[int XChildIndex] = { read=FXChildXText };
Default Value
""
Remarks
The inner text of the element.
The XChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the XChildCount property.
This property is read-only and not available at design time.
Data Type
String
XElement Property (SAML Component)
The name of the current element.
Syntax
__property String XElement = { read=FXElement, write=FSetXElement };
Default Value
""
Remarks
The current element is specified via the XPath property.
Data Type
String
XNamespace Property (SAML Component)
The namespace of the current element.
Syntax
__property String XNamespace = { read=FXNamespace, write=FSetXNamespace };
Default Value
""
Remarks
The current element is specified via the XPath property.
Data Type
String
XParent Property (SAML Component)
The parent of the current element.
Syntax
__property String XParent = { read=FXParent };
Default Value
""
Remarks
The current element is specified via the XPath property.
This property is read-only.
Data Type
String
XPath Property (SAML Component)
Provides a way to point to a specific element in the document.
Syntax
__property String XPath = { read=FXPath, write=FSetXPath };
Default Value
""
Remarks
XPath implements a subset of the XML XPath specification, allowing you to point to specific elements in the XML documents.
The path is a series of one or more element accessors separated by '/'. The path can be absolute (starting with '/') or relative to the current XPath location.
The following are possible values for an element accessor:
'name' | A particular element name |
name[i] | The i-th subelement of the current element with the given name |
[i] | The i-th subelement of the current element |
[last()] | The last subelement of the current element |
[last()-i] | The subelement located at the last location minus i in the current element |
name[@attrname="attrvalue"] | The subelement containing a particular value for a given attribute (supports single AND double quotes) |
.. | The parent of the current element |
BuildDOM must be set to True prior to parsing the document for the XPath functionality to be available.
Example (Setting XPath):
Document root | XML.XPath = "/" |
Specific Element | XML.XPath = "/root/SubElement1/SubElement2/" |
i-th Child | XML.XPath = "/root/SubElement1[i]" |
Data Type
String
XPrefix Property (SAML Component)
The prefix of the current element.
Syntax
__property String XPrefix = { read=FXPrefix, write=FSetXPrefix };
Default Value
""
Remarks
The current element is specified via the XPath property.
Data Type
String
XSubTree Property (SAML Component)
A snapshot of the current element in the document.
Syntax
__property String XSubTree = { read=FXSubTree };
Default Value
""
Remarks
The current element is specified via the XPath property. In order for this property to work you must have the CacheContent set to true.
This property is read-only.
Data Type
String
XText Property (SAML Component)
The text of the current element.
Syntax
__property String XText = { read=FXText, write=FSetXText };
Default Value
""
Remarks
The current element is specified via the XPath property.
Data Type
String
Config Method (SAML Component)
Sets or retrieves a configuration setting.
Syntax
String __fastcall Config(String ConfigurationString);
Remarks
Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.
These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.
To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).
To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.
GetAssertion Method (SAML Component)
Gets the assertion.
Syntax
void __fastcall GetAssertion();
Remarks
This method communicates with LocalSTS as to obtain an assertion.
When AuthMode is set to 0 (camSharePointOnline) or 1 (camDynamicsCRM) the component will automatically populate various properties to known values to reduce the number of required settings. Typically only the following properties are required:
When AuthMode is set to 2 (camADFS) or 3 (camCustom) the following properties are required:
If the assertion is signed the component will use the certificate specified in SignerCert to verify the signature. If SignerCert is not set the component will attempt to parse the certificate present in the assertion to perform verification.
After the assertion is parsed and the signature is verified (if present) the following properties will be populated:
- AssertionId
- AssertionIssueInstant
- AssertionIssuer
- AssertionNotBefore
- AssertionNotOnOrAfter
- AssertionSubject
- AssertionVersion
- AssertionXML
- Claim* properties
GetSecurityToken Method (SAML Component)
Gets the security token.
Syntax
void __fastcall GetSecurityToken();
Remarks
This method communicates with FederationSTS and LocalSTS as applicable to obtain a security token. The SecurityTokenXML property will be populated with the retrieved token.
When AuthMode is set to 0 (camSharePointOnline) or 1 (camDynamicsCRM) the component will automatically populate various properties to known values to reduce the number of required settings. Typically only the following properties are required:
When AuthMode is set to 2 (camADFS) or 3 (camCustom) the following properties are required:
ParseAssertion Method (SAML Component)
Parses the specified assertion.
Syntax
void __fastcall ParseAssertion(String assertion);
Remarks
This method parses the assertion specified by the assertion parameter. If the assertion is signed the component will use the certificate specified in SignerCert to verify the signature. If SignerCert is not set the component will attempt to parse the certificate present in the assertion to perform verification.
After the assertion is parsed and the signature is verified (if present) the following properties will be populated:
- AssertionId
- AssertionIssueInstant
- AssertionIssuer
- AssertionNotBefore
- AssertionNotOnOrAfter
- AssertionSubject
- AssertionVersion
- AssertionXML
- Claim* properties
Characters Event (SAML Component)
Fired for plain text segments of the input stream.
Syntax
typedef struct { String Text; } TipaSAMLCharactersEventParams; typedef void __fastcall (__closure *TipaSAMLCharactersEvent)(System::TObject* Sender, TipaSAMLCharactersEventParams *e); __property TipaSAMLCharactersEvent OnCharacters = { read=FOnCharacters, write=FOnCharacters };
Remarks
The Characters event provides the plain text content of the XML document (i.e. the text inside the tags). The text is provided through the Text parameter.
The text includes white space as well as end of line characters, except for ignorable whitespace which is fired through the IgnorableWhitespace event.
Comment Event (SAML Component)
Fired when a comment section is encountered.
Syntax
typedef struct { String Text; } TipaSAMLCommentEventParams; typedef void __fastcall (__closure *TipaSAMLCommentEvent)(System::TObject* Sender, TipaSAMLCommentEventParams *e); __property TipaSAMLCommentEvent OnComment = { read=FOnComment, write=FOnComment };
Remarks
The Comment event is fired whenever a comment section (<!-- ..text... -->) is found in the document.
The full text of the comment is provided by the Text parameter.
EndElement Event (SAML Component)
Fired when an end-element tag is encountered.
Syntax
typedef struct { String Namespace; String Element; String QName; bool IsEmpty; } TipaSAMLEndElementEventParams; typedef void __fastcall (__closure *TipaSAMLEndElementEvent)(System::TObject* Sender, TipaSAMLEndElementEventParams *e); __property TipaSAMLEndElementEvent OnEndElement = { read=FOnEndElement, write=FOnEndElement };
Remarks
The EndElement event is fired when an end-element tag is found in the document.
The element name is provided by the Element parameter.
The IsEmpty parameter is true when the event corresponds with an empty element declaration.
Error Event (SAML Component)
Information about errors during data delivery.
Syntax
typedef struct { int ErrorCode; String Description; } TipaSAMLErrorEventParams; typedef void __fastcall (__closure *TipaSAMLErrorEvent)(System::TObject* Sender, TipaSAMLErrorEventParams *e); __property TipaSAMLErrorEvent OnError = { read=FOnError, write=FOnError };
Remarks
The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.
The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.
PI Event (SAML Component)
Fired when a processing instruction section is encountered.
Syntax
typedef struct { String Text; } TipaSAMLPIEventParams; typedef void __fastcall (__closure *TipaSAMLPIEvent)(System::TObject* Sender, TipaSAMLPIEventParams *e); __property TipaSAMLPIEvent OnPI = { read=FOnPI, write=FOnPI };
Remarks
The PI event is fired whenever a processing instruction section (<? ..text... ?>) is found in the document.
The full text of the processing instruction is provided by the Text parameter.
SSLServerAuthentication Event (SAML Component)
Fired after the server presents its certificate to the client.
Syntax
typedef struct { String CertEncoded; DynamicArray<Byte> CertEncodedB; String CertSubject; String CertIssuer; String Status; bool Accept; } TipaSAMLSSLServerAuthenticationEventParams; typedef void __fastcall (__closure *TipaSAMLSSLServerAuthenticationEvent)(System::TObject* Sender, TipaSAMLSSLServerAuthenticationEventParams *e); __property TipaSAMLSSLServerAuthenticationEvent OnSSLServerAuthentication = { read=FOnSSLServerAuthentication, write=FOnSSLServerAuthentication };
Remarks
During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.
When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.
SSLStatus Event (SAML Component)
Shows the progress of the secure connection.
Syntax
typedef struct { String Message; } TipaSAMLSSLStatusEventParams; typedef void __fastcall (__closure *TipaSAMLSSLStatusEvent)(System::TObject* Sender, TipaSAMLSSLStatusEventParams *e); __property TipaSAMLSSLStatusEvent OnSSLStatus = { read=FOnSSLStatus, write=FOnSSLStatus };
Remarks
The event is fired for informational and logging purposes only. This event tracks the progress of the connection.
StartElement Event (SAML Component)
Fired when a begin-element tag is encountered in the document.
Syntax
typedef struct { String Namespace; String Element; String QName; bool IsEmpty; } TipaSAMLStartElementEventParams; typedef void __fastcall (__closure *TipaSAMLStartElementEvent)(System::TObject* Sender, TipaSAMLStartElementEventParams *e); __property TipaSAMLStartElementEvent OnStartElement = { read=FOnStartElement, write=FOnStartElement };
Remarks
The StartElement event is fired when a begin-element tag is found in the document.
The element name is provided through the Element parameter. The attribute names and values (if any) are provided through the AttrName, AttrNamespace, AttrPrefix, and AttrValue properties.
The IsEmpty parameter is true when the event corresponds with an empty element declaration.
Config Settings (SAML Component)
The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.SAML Config Settings
This configuration setting is used to access the Audience elements found in an assertion's AudienceRestriction element. The audience is useful when verifying who the assertion is intended for. This is used in conjunction with AssertionAudienceValue configuration setting. For instance, the below sample will iterate through all of the Audience elements in the assertion's AudienceRestriction element:
int audCount = int.Parse(component.Config("AssertionAudienceCount"));
for(int i = 0; i < audCount; i++){
string curAudience = component.Config("AssertionAudienceValue[" + i + "]");
//...
}
This configuration setting provides the value of the Audience element at the index specified. See AssertionAudienceCount for details.
Normally when calling ParseAssertion, only the assertion itself should be passed in. In the event that the assertion is nested in other markup, set this to the XPath of the assertion to instruct the component where to find it. For encrypted assertions there is a similar EncryptedAssertionXPath configuration setting.
saml.Config("AssertionXPath=/Response/Assertion");
saml.ParseAssertion(Assertion);
The XPath to the assertion.Normally when calling ParseAssertion, only the assertion itself should be passed in. In the event that the assertion is nested in other markup, set this to the XPath of the assertion to instruct the component where to find it. For encrypted assertions there is a similar EncryptedAssertionXPath configuration setting.
Normally when calling ParseAssertion, only the assertion itself should be passed in. In the event that the assertion is nested in other markup, set this to the XPath of the assertion to instruct the component where to find it. For encrypted assertions there is a similar EncryptedAssertionXPath configuration setting.
saml.Config("AssertionXPath=/Response/Assertion");
saml.ParseAssertion(Assertion);
The XPath to the assertion.Normally when calling ParseAssertion, only the assertion itself should be passed in. In the event that the assertion is nested in other markup, set this to the XPath of the assertion to instruct the component where to find it. For encrypted assertions there is a similar EncryptedAssertionXPath configuration setting.
This setting specifies whether the component should decrypt the assertion. If set to True the component will use the certificate specified by Certificate to decrypt the assertion. The default value is False.
Normally when calling ParseAssertion, only the encrypted assertion itself should be passed in. In the event that the encrypted assertion is nested in other markup, set this to the XPath of the encrypted assertion to instruct the component where to find it. For plaintext assertions there is a similar AssertionXPath configuration setting.
saml.Config("EncryptedAssertionXPath=/Response/EncryptedAssertion"");
saml.ParseAssertion(Assertion);
This may be queried after calling GetAssertion or GetSecurityToken. This will return the raw HTTP request which may be useful for troubleshooting purposes. For instance:
component.GetAssertion();
MyString = component.Config("RawRequest");
This may be queried after calling GetAssertion or GetSecurityToken. This will return the raw HTTP response which may be useful for troubleshooting purposes. For instance:
component.GetAssertion();
MyString = component.Config("RawResponse");
This setting specifies the URL of a web service which will be queried to determine the LocalSTS value. This is only applicable when AuthMode is set to 0 (camSharePointOnline) or 1 (camDynamicsCRM). When AuthMode is set to either 0 or 1 this setting is automatically set to "https://login.microsoftonline.com/GetUserRealm.srf". In most cases this does not need to be changed.
Base Config Settings
When queried, this setting will return a string containing information about the product's build.
The default code page is Unicode UTF-8 (65001).
The following is a list of valid code page identifiers:
Identifier | Name |
037 | IBM EBCDIC - U.S./Canada |
437 | OEM - United States |
500 | IBM EBCDIC - International |
708 | Arabic - ASMO 708 |
709 | Arabic - ASMO 449+, BCON V4 |
710 | Arabic - Transparent Arabic |
720 | Arabic - Transparent ASMO |
737 | OEM - Greek (formerly 437G) |
775 | OEM - Baltic |
850 | OEM - Multilingual Latin I |
852 | OEM - Latin II |
855 | OEM - Cyrillic (primarily Russian) |
857 | OEM - Turkish |
858 | OEM - Multilingual Latin I + Euro symbol |
860 | OEM - Portuguese |
861 | OEM - Icelandic |
862 | OEM - Hebrew |
863 | OEM - Canadian-French |
864 | OEM - Arabic |
865 | OEM - Nordic |
866 | OEM - Russian |
869 | OEM - Modern Greek |
870 | IBM EBCDIC - Multilingual/ROECE (Latin-2) |
874 | ANSI/OEM - Thai (same as 28605, ISO 8859-15) |
875 | IBM EBCDIC - Modern Greek |
932 | ANSI/OEM - Japanese, Shift-JIS |
936 | ANSI/OEM - Simplified Chinese (PRC, Singapore) |
949 | ANSI/OEM - Korean (Unified Hangul Code) |
950 | ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC) |
1026 | IBM EBCDIC - Turkish (Latin-5) |
1047 | IBM EBCDIC - Latin 1/Open System |
1140 | IBM EBCDIC - U.S./Canada (037 + Euro symbol) |
1141 | IBM EBCDIC - Germany (20273 + Euro symbol) |
1142 | IBM EBCDIC - Denmark/Norway (20277 + Euro symbol) |
1143 | IBM EBCDIC - Finland/Sweden (20278 + Euro symbol) |
1144 | IBM EBCDIC - Italy (20280 + Euro symbol) |
1145 | IBM EBCDIC - Latin America/Spain (20284 + Euro symbol) |
1146 | IBM EBCDIC - United Kingdom (20285 + Euro symbol) |
1147 | IBM EBCDIC - France (20297 + Euro symbol) |
1148 | IBM EBCDIC - International (500 + Euro symbol) |
1149 | IBM EBCDIC - Icelandic (20871 + Euro symbol) |
1200 | Unicode UCS-2 Little-Endian (BMP of ISO 10646) |
1201 | Unicode UCS-2 Big-Endian |
1250 | ANSI - Central European |
1251 | ANSI - Cyrillic |
1252 | ANSI - Latin I |
1253 | ANSI - Greek |
1254 | ANSI - Turkish |
1255 | ANSI - Hebrew |
1256 | ANSI - Arabic |
1257 | ANSI - Baltic |
1258 | ANSI/OEM - Vietnamese |
1361 | Korean (Johab) |
10000 | MAC - Roman |
10001 | MAC - Japanese |
10002 | MAC - Traditional Chinese (Big5) |
10003 | MAC - Korean |
10004 | MAC - Arabic |
10005 | MAC - Hebrew |
10006 | MAC - Greek I |
10007 | MAC - Cyrillic |
10008 | MAC - Simplified Chinese (GB 2312) |
10010 | MAC - Romania |
10017 | MAC - Ukraine |
10021 | MAC - Thai |
10029 | MAC - Latin II |
10079 | MAC - Icelandic |
10081 | MAC - Turkish |
10082 | MAC - Croatia |
12000 | Unicode UCS-4 Little-Endian |
12001 | Unicode UCS-4 Big-Endian |
20000 | CNS - Taiwan |
20001 | TCA - Taiwan |
20002 | Eten - Taiwan |
20003 | IBM5550 - Taiwan |
20004 | TeleText - Taiwan |
20005 | Wang - Taiwan |
20105 | IA5 IRV International Alphabet No. 5 (7-bit) |
20106 | IA5 German (7-bit) |
20107 | IA5 Swedish (7-bit) |
20108 | IA5 Norwegian (7-bit) |
20127 | US-ASCII (7-bit) |
20261 | T.61 |
20269 | ISO 6937 Non-Spacing Accent |
20273 | IBM EBCDIC - Germany |
20277 | IBM EBCDIC - Denmark/Norway |
20278 | IBM EBCDIC - Finland/Sweden |
20280 | IBM EBCDIC - Italy |
20284 | IBM EBCDIC - Latin America/Spain |
20285 | IBM EBCDIC - United Kingdom |
20290 | IBM EBCDIC - Japanese Katakana Extended |
20297 | IBM EBCDIC - France |
20420 | IBM EBCDIC - Arabic |
20423 | IBM EBCDIC - Greek |
20424 | IBM EBCDIC - Hebrew |
20833 | IBM EBCDIC - Korean Extended |
20838 | IBM EBCDIC - Thai |
20866 | Russian - KOI8-R |
20871 | IBM EBCDIC - Icelandic |
20880 | IBM EBCDIC - Cyrillic (Russian) |
20905 | IBM EBCDIC - Turkish |
20924 | IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol) |
20932 | JIS X 0208-1990 & 0121-1990 |
20936 | Simplified Chinese (GB2312) |
21025 | IBM EBCDIC - Cyrillic (Serbian, Bulgarian) |
21027 | Extended Alpha Lowercase |
21866 | Ukrainian (KOI8-U) |
28591 | ISO 8859-1 Latin I |
28592 | ISO 8859-2 Central Europe |
28593 | ISO 8859-3 Latin 3 |
28594 | ISO 8859-4 Baltic |
28595 | ISO 8859-5 Cyrillic |
28596 | ISO 8859-6 Arabic |
28597 | ISO 8859-7 Greek |
28598 | ISO 8859-8 Hebrew |
28599 | ISO 8859-9 Latin 5 |
28605 | ISO 8859-15 Latin 9 |
29001 | Europa 3 |
38598 | ISO 8859-8 Hebrew |
50220 | ISO 2022 Japanese with no halfwidth Katakana |
50221 | ISO 2022 Japanese with halfwidth Katakana |
50222 | ISO 2022 Japanese JIS X 0201-1989 |
50225 | ISO 2022 Korean |
50227 | ISO 2022 Simplified Chinese |
50229 | ISO 2022 Traditional Chinese |
50930 | Japanese (Katakana) Extended |
50931 | US/Canada and Japanese |
50933 | Korean Extended and Korean |
50935 | Simplified Chinese Extended and Simplified Chinese |
50936 | Simplified Chinese |
50937 | US/Canada and Traditional Chinese |
50939 | Japanese (Latin) Extended and Japanese |
51932 | EUC - Japanese |
51936 | EUC - Simplified Chinese |
51949 | EUC - Korean |
51950 | EUC - Traditional Chinese |
52936 | HZ-GB2312 Simplified Chinese |
54936 | Windows XP: GB18030 Simplified Chinese (4 Byte) |
57002 | ISCII Devanagari |
57003 | ISCII Bengali |
57004 | ISCII Tamil |
57005 | ISCII Telugu |
57006 | ISCII Assamese |
57007 | ISCII Oriya |
57008 | ISCII Kannada |
57009 | ISCII Malayalam |
57010 | ISCII Gujarati |
57011 | ISCII Punjabi |
65000 | Unicode UTF-7 |
65001 | Unicode UTF-8 |
Identifier | Name |
1 | ASCII |
2 | NEXTSTEP |
3 | JapaneseEUC |
4 | UTF8 |
5 | ISOLatin1 |
6 | Symbol |
7 | NonLossyASCII |
8 | ShiftJIS |
9 | ISOLatin2 |
10 | Unicode |
11 | WindowsCP1251 |
12 | WindowsCP1252 |
13 | WindowsCP1253 |
14 | WindowsCP1254 |
15 | WindowsCP1250 |
21 | ISO2022JP |
30 | MacOSRoman |
10 | UTF16String |
0x90000100 | UTF16BigEndian |
0x94000100 | UTF16LittleEndian |
0x8c000100 | UTF32String |
0x98000100 | UTF32BigEndian |
0x9c000100 | UTF32LittleEndian |
65536 | Proprietary |
When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:
- Product: The product the license is for.
- Product Key: The key the license was generated from.
- License Source: Where the license was found (e.g., RuntimeLicense, License File).
- License Type: The type of license installed (e.g., Royalty Free, Single Server).
- Last Valid Build: The last valid build number for which the license will work.
In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.
This setting only works on these components: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.
When set to true, the component will utilize the underlying operating system's certified APIs. Java editions, regardless of OS, utilize Bouncy Castle FIPS, while all the other Windows editions make use of Microsoft security libraries.
FIPS mode can be enabled by setting the UseFIPSCompliantAPI configuration setting to true. This is a static setting which applies to all instances of all components of the toolkit within the process. It is recommended to enable or disable this setting once before the component has been used to establish a connection. Enabling FIPS while an instance of the component is active and connected may result in unexpected behavior.
For more details please see the FIPS 140-2 Compliance article.
Note: This setting is only applicable on Windows.
Note: Enabling FIPS-compliance requires a special license; please contact sales@nsoftware.com for details.
When set to false, the component will use the system security libraries by default to perform cryptographic functions where applicable.
Setting this configuration setting to true tells the component to use the internal implementation instead of using the system security libraries.
This setting is set to false by default on all platforms.
Trappable Errors (SAML Component)
SAML Errors
603 Cannot obtain assertion. LocalSTS must be set. |
The component may also return one of the following error codes, which are inherited from other components.
HTTP Errors
118 Firewall Error. Error description contains detailed message. | |
143 Busy executing current method. | |
151 HTTP protocol error. The error message has the server response. | |
152 No server specified in URL | |
153 Specified URLScheme is invalid. | |
155 Range operation is not supported by server. | |
156 Invalid cookie index (out of range). | |
301 Interrupted. | |
302 Can't open AttachedFile. |
The component may also return one of the following error codes, which are inherited from other components.
TCPClient Errors
100 You cannot change the RemotePort at this time. A connection is in progress. | |
101 You cannot change the RemoteHost (Server) at this time. A connection is in progress. | |
102 The RemoteHost address is invalid (0.0.0.0). | |
104 Already connected. If you want to reconnect, close the current connection first. | |
106 You cannot change the LocalPort at this time. A connection is in progress. | |
107 You cannot change the LocalHost at this time. A connection is in progress. | |
112 You cannot change MaxLineLength at this time. A connection is in progress. | |
116 RemotePort cannot be zero. Please specify a valid service port number. | |
117 You cannot change the UseConnection option while the component is active. | |
135 Operation would block. | |
201 Timeout. | |
211 Action impossible in control's present state. | |
212 Action impossible while not connected. | |
213 Action impossible while listening. | |
301 Timeout. | |
302 Could not open file. | |
434 Unable to convert string to selected CodePage. | |
1105 Already connecting. If you want to reconnect, close the current connection first. | |
1117 You need to connect first. | |
1119 You cannot change the LocalHost at this time. A connection is in progress. | |
1120 Connection dropped by remote host. |
TCP/IP Errors
10004 [10004] Interrupted system call. | |
10009 [10009] Bad file number. | |
10013 [10013] Access denied. | |
10014 [10014] Bad address. | |
10022 [10022] Invalid argument. | |
10024 [10024] Too many open files. | |
10035 [10035] Operation would block. | |
10036 [10036] Operation now in progress. | |
10037 [10037] Operation already in progress. | |
10038 [10038] Socket operation on non-socket. | |
10039 [10039] Destination address required. | |
10040 [10040] Message too long. | |
10041 [10041] Protocol wrong type for socket. | |
10042 [10042] Bad protocol option. | |
10043 [10043] Protocol not supported. | |
10044 [10044] Socket type not supported. | |
10045 [10045] Operation not supported on socket. | |
10046 [10046] Protocol family not supported. | |
10047 [10047] Address family not supported by protocol family. | |
10048 [10048] Address already in use. | |
10049 [10049] Can't assign requested address. | |
10050 [10050] Network is down. | |
10051 [10051] Network is unreachable. | |
10052 [10052] Net dropped connection or reset. | |
10053 [10053] Software caused connection abort. | |
10054 [10054] Connection reset by peer. | |
10055 [10055] No buffer space available. | |
10056 [10056] Socket is already connected. | |
10057 [10057] Socket is not connected. | |
10058 [10058] Can't send after socket shutdown. | |
10059 [10059] Too many references, can't splice. | |
10060 [10060] Connection timed out. | |
10061 [10061] Connection refused. | |
10062 [10062] Too many levels of symbolic links. | |
10063 [10063] File name too long. | |
10064 [10064] Host is down. | |
10065 [10065] No route to host. | |
10066 [10066] Directory not empty | |
10067 [10067] Too many processes. | |
10068 [10068] Too many users. | |
10069 [10069] Disc Quota Exceeded. | |
10070 [10070] Stale NFS file handle. | |
10071 [10071] Too many levels of remote in path. | |
10091 [10091] Network subsystem is unavailable. | |
10092 [10092] WINSOCK DLL Version out of range. | |
10093 [10093] Winsock not loaded yet. | |
11001 [11001] Host not found. | |
11002 [11002] Non-authoritative 'Host not found' (try again or check DNS setup). | |
11003 [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP. | |
11004 [11004] Valid name, no data record (check DNS setup). |