NTLM Component

Properties   Methods   Events   Config Settings   Errors  

The NTLM component provides a simple API to create the required tokens for NTLM authentication.

Syntax

TipaNTLM

Remarks

This component provides a simple API to create the required tokens for NTLM authentication.

The NTLM authentication process is a challenge-response scheme which consists of three messages. These three messages are the negotiation, challenge, and authentication. This component implements only the client side of NTLM and will create the negotiation and authentication tokens. The component does not transmit any data, it simply prepares the tokens for use in other transport protocols such as HTTP. The following steps describe how the component is used.

Create the Negotiate Token

To begin first set User and Password. The user value may contain domain information in the format "DOMAIN\User" or "user@domain". Next call CreateNegotiateToken to populate NegotiateToken. This token may then be transmitted separately. For instance in HTTP this would be sent in a request within the Authorization header: HTTPHeader = "Authorization: NTLM " + NegotiateToken

Create the Auth Token

After sending the negotiate token over the chosen transport protocol, the server will respond with a challenge token. Set ChallengeToken to the token received from the server. For instance, in HTTP the server will respond with the challenge token in the WWW-Authenticate header: 

WWW-Authenticate: NTLM <ChallengeToken>
After setting User, Password, and ChallengeToken call CreateAuthToken. This will populate AuthToken with the created token. This token may then be transmitted separately. For instance in HTTP this would be sent in the request within the Authorization header: HTTPHeader = "Authorization: NTLM " + AuthToken

Note: If the server requires EPA (Extended Protection for Authentication), then SSLServerCert must be set to the server's public certificate before calling CreateAuthToken.

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

AuthTokenThe authentication token.
ChallengeTokenThe challenge token.
NegotiateTokenThe negotiate token.
NTLMVersionThe NTLM version.
PasswordThe user's password.
SSLServerCertThe server's public certificate.
UserThe user.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

ConfigSets or retrieves a configuration setting.
CreateAuthTokenCreates the authentication token.
CreateNegotiateTokenCreates the negotiate token.
ResetResets the component.

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

ErrorFired when information is available about errors during data delivery.

Config Settings

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

DecodeTokenWhether to Base64 encode the token.
EncodeTokenWhether to Base64 encode the token.
UsePlatformNTLMAPIWhether to use the platform NTLM API.
WorkstationThe workstation name.
BuildInfoInformation about the product's build.
CodePageThe system code page used for Unicode to Multibyte translations.
LicenseInfoInformation about the current license.
MaskSensitiveDataWhether sensitive data is masked in log messages.
UseFIPSCompliantAPITells the component whether or not to use FIPS certified APIs.
UseInternalSecurityAPIWhether or not to use the system security libraries or an internal implementation.

AuthToken Property (NTLM Component)

The authentication token.

Syntax

property AuthToken: String read get_AuthToken;
property AuthTokenB: TBytes read get_AuthTokenB;

Default Value

''

Remarks

This property holds the created authentication token. This property is populated after calling CreateAuthToken.

Note: By default this value is Base64 encoded. Set EncodeToken to False before calling CreateAuthToken to obtain the raw value.

This property is read-only.

ChallengeToken Property (NTLM Component)

The challenge token.

Syntax

property ChallengeToken: String read get_ChallengeToken write set_ChallengeToken;
property ChallengeTokenB: TBytes read get_ChallengeTokenB write set_ChallengeTokenB;

Default Value

''

Remarks

This property specifies the challenge token. This must be set to the challenge token received from the server before calling CreateAuthToken.

Note: By default the component expects the token to be Base64 encoded. To provide a raw value to this property first set DecodeToken to False.

NegotiateToken Property (NTLM Component)

The negotiate token.

Syntax

property NegotiateToken: String read get_NegotiateToken;
property NegotiateTokenB: TBytes read get_NegotiateTokenB;

Default Value

''

Remarks

This property is populated after calling CreateNegotiateToken. By default the value is Base64 encoded. To obtain the raw value set EncodeToken to False before calling CreateNegotiateToken.

This property is read-only.

NTLMVersion Property (NTLM Component)

The NTLM version.

Syntax

property NTLMVersion: TipaTNTLMVersions read get_NTLMVersion write set_NTLMVersion;

TipaTNTLMVersions = (
  ntNTLMv1,
  ntNTLMv2
);

Default Value

ntNTLMv1

Remarks

This property specifies the NTLM version to use. Possible values are:

  • 1 (ntNTLMv1 - default)
  • 2 (ntNTLMv2)

Note: If the server requires EPA (Extended Protection for Authentication) this property must be set to 2 (ntNTLMv2).

Password Property (NTLM Component)

The user's password.

Syntax

property Password: String read get_Password write set_Password;

Default Value

''

Remarks

This property specifies the user's password.

SSLServerCert Property (NTLM Component)

The server's public certificate.

Syntax

property SSLServerCert: TipaCertificate read get_SSLServerCert write set_SSLServerCert;

Remarks

This property specifies the server's public certificate. This must be set if the server requires EPA (Extended Protection for Authentication).

Please refer to the Certificate type for a complete list of fields.

User Property (NTLM Component)

The user.

Syntax

property User: String read get_User write set_User;

Default Value

''

Remarks

This property specifies the name and realm/domain of the user. The value specified must be in one of the following formats:

  • user
  • domain/user

Config Method (NTLM Component)

Sets or retrieves a configuration setting.

Syntax

function Config(ConfigurationString: String): String;

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

CreateAuthToken Method (NTLM Component)

Creates the authentication token.

Syntax

procedure CreateAuthToken();

Remarks

This method creates the authentication token. After calling this method the AuthToken property will be populated. The following properties are applicable when calling this method:

Note: SSLServerCert must be set to the server's public certificate if the server requires EPA (Extended Protection for Authentication).

CreateNegotiateToken Method (NTLM Component)

Creates the negotiate token.

Syntax

procedure CreateNegotiateToken();

Remarks

This method creates the negotiate token. After calling this method the NegotiateToken property is populated. The following properties are applicable when calling this method:

Reset Method (NTLM Component)

Resets the component.

Syntax

procedure Reset();

Remarks

When called, the component will reset all of its properties to their default values.

Error Event (NTLM Component)

Fired when information is available about errors during data delivery.

Syntax

type TErrorEvent = procedure (
  Sender: TObject;
  ErrorCode: Integer;
  const Description: String
) of Object;

property OnError: TErrorEvent read FOnError write FOnError;

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Certificate Type

This is the digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

The following fields are available:
  • EffectiveDate
  • ExpirationDate
  • ExtendedKeyUsage
  • Fingerprint
  • FingerprintSHA1
  • FingerprintSHA256
  • Issuer
  • PrivateKey
  • PrivateKeyAvailable
  • PrivateKeyContainer
  • PublicKey
  • PublicKeyAlgorithm
  • PublicKeyLength
  • SerialNumber
  • SignatureAlgorithm
  • Store
  • StorePassword
  • StoreType
  • SubjectAltNames
  • ThumbprintMD5
  • ThumbprintSHA1
  • ThumbprintSHA256
  • Usage
  • UsageFlags
  • Version
  • Subject
  • Encoded

    • Fields

    EffectiveDate
    String (read-only)
    Default Value: ""

    The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

    23-Jan-2000 15:00:00.

    ExpirationDate
    String (read-only)
    Default Value: ""

    The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

    23-Jan-2001 15:00:00.

    ExtendedKeyUsage
    String (read-only)
    Default Value: ""

    A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

    Fingerprint
    String (read-only)
    Default Value: ""

    The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

    The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

    FingerprintSHA1
    String (read-only)
    Default Value: ""

    The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

    The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

    FingerprintSHA256
    String (read-only)
    Default Value: ""

    The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

    The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

    Issuer
    String (read-only)
    Default Value: ""

    The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

    PrivateKey
    String (read-only)
    Default Value: ""

    The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

    Note: The PrivateKey may be available but not exportable. In this case, PrivateKey returns an empty string.

    PrivateKeyAvailable
    Boolean (read-only)
    Default Value: False

    Whether a PrivateKey is available for the selected certificate. If PrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

    PrivateKeyContainer
    String (read-only)
    Default Value: ""

    The name of the PrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

    PublicKey
    String (read-only)
    Default Value: ""

    The public key of the certificate. The key is provided as PEM/Base64-encoded data.

    PublicKeyAlgorithm
    String (read-only)
    Default Value: ""

    The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

    PublicKeyLength
    Integer (read-only)
    Default Value: 0

    The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

    SerialNumber
    String (read-only)
    Default Value: ""

    The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

    SignatureAlgorithm
    String (read-only)
    Default Value: ""

    The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

    Store
    String
    Default Value: "MY"

    The name of the certificate store for the client certificate.

    The StoreType property denotes the type of the certificate store specified by Store. If the store is password-protected, specify the password in StorePassword.

    Store is used in conjunction with the Subject property to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject property for details.

    Designations of certificate stores are platform dependent.

    The following designations are the most common User and Machine certificate stores in Windows:

    MYA certificate store holding personal certificates with their associated private keys.
    CACertifying authority certificates.
    ROOTRoot certificates.

    When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

    StoreB
    TBytes
    Default Value: "MY"

    The name of the certificate store for the client certificate.

    The StoreType property denotes the type of the certificate store specified by Store. If the store is password-protected, specify the password in StorePassword.

    Store is used in conjunction with the Subject property to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject property for details.

    Designations of certificate stores are platform dependent.

    The following designations are the most common User and Machine certificate stores in Windows:

    MYA certificate store holding personal certificates with their associated private keys.
    CACertifying authority certificates.
    ROOTRoot certificates.

    When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

    StorePassword
    String
    Default Value: ""

    If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

    StoreType
    TipaCertStoreTypes
    Default Value: 0

    The type of certificate store for this certificate.

    The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

    0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user.

    Note: This store type is not available in Java.

    1 (cstMachine)For Windows, this specifies that the certificate store is a machine store.

    Note: This store type is not available in Java.

    2 (cstPFXFile)The certificate store is the name of a PFX (PKCS#12) file containing certificates.
    3 (cstPFXBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
    4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates.

    Note: This store type is only available in Java.

    5 (cstJKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.

    Note: This store type is only available in Java.

    6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
    7 (cstPEMKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
    8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
    9 (cstPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
    10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
    11 (cstP7BFile)The certificate store is the name of a PKCS#7 file containing certificates.
    12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
    13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
    14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
    15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
    16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
    17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
    18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
    19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
    21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).

    Note: This store type is only available in Java and .NET.

    22 (cstBCFKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.

    Note: This store type is only available in Java and .NET.

    23 (cstPKCS11)The certificate is present on a physical security key accessible via a PKCS#11 interface.

    To use a security key, the necessary data must first be collected using the CertMgr component. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

    When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN.

    Code Example. SSH Authentication with Security Key: certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

    99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

    SubjectAltNames
    String (read-only)
    Default Value: ""

    Comma-separated lists of alternative subject names for the certificate.

    ThumbprintMD5
    String (read-only)
    Default Value: ""

    The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

    ThumbprintSHA1
    String (read-only)
    Default Value: ""

    The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

    ThumbprintSHA256
    String (read-only)
    Default Value: ""

    The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

    Usage
    String (read-only)
    Default Value: ""

    The text description of UsageFlags.

    This value will be one or more of the following strings and will be separated by commas:

    • Digital Signature
    • Non-Repudiation
    • Key Encipherment
    • Data Encipherment
    • Key Agreement
    • Certificate Signing
    • CRL Signing
    • Encipher Only

    If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

    UsageFlags
    Integer (read-only)
    Default Value: 0

    The flags that show intended use for the certificate. The value of UsageFlags is a combination of the following flags:

    0x80Digital Signature
    0x40Non-Repudiation
    0x20Key Encipherment
    0x10Data Encipherment
    0x08Key Agreement
    0x04Certificate Signing
    0x02CRL Signing
    0x01Encipher Only

    Please see the Usage property for a text representation of UsageFlags.

    This functionality currently is not available when the provider is OpenSSL.

    Version
    String (read-only)
    Default Value: ""

    The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

    Subject
    String
    Default Value: ""

    The subject of the certificate used for client authentication.

    This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

    If a matching certificate is found, the property is set to the full subject of the matching certificate.

    If an exact match is not found, the store is searched for subjects containing the value of the property.

    If a match is still not found, the property is set to an empty string, and no certificate is selected.

    The special value "*" picks a random certificate in the certificate store.

    The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

    FieldMeaning
    CNCommon Name. This is commonly a hostname like www.server.com.
    OOrganization
    OUOrganizational Unit
    LLocality
    SState
    CCountry
    EEmail Address

    If a field value contains a comma, it must be quoted.

    Encoded
    String
    Default Value: ""

    The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The Store and Subject properties also may be used to specify a certificate.

    When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

    EncodedB
    TBytes
    Default Value: ""

    The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The Store and Subject properties also may be used to specify a certificate.

    When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

    Constructors

    > 

    constructor Create();

    Creates a instance whose properties can be set. This is useful for use with when generating new certificates.

    > 
    constructor Create(valEncoded: TBytes);

    Parses Encoded as an X.509 public key.

    > 
    constructor Create(valStoreType: TipaCertStoreTypes; valStore: String; valStorePassword: String; valSubject: String);

    StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store.

    After the store has been successfully opened, the component will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

    > 
    constructor Create(valStoreType: TipaCertStoreTypes; valStore: TBytes; valStorePassword: String; valSubject: String);

    StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a byte array containing the certificate data. StorePassword is the password used to protect the store.

    After the store has been successfully opened, the component will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

    Config Settings (NTLM Component)

    The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

    NTLM Config Settings

    DecodeToken:   Whether to Base64 encode the token.

    This setting specifies whether to Base64 decode the ChallengeToken. The default value is True.

    EncodeToken:   Whether to Base64 encode the token.

    This setting specifies whether AuthToken and rpChallengeToken are Base64 encoded after calling CreateAuthToken and rmCreateNegotiateToken;. The default value is True.

    UsePlatformNTLMAPI:   Whether to use the platform NTLM API.

    This setting specifies whether to use the platform NTLM API. The default value is False.

    Workstation:   The workstation name.

    This setting optionally specifies the workstation name of the client. By default this value is empty and the component will automatically determine the correct value.

    Note: This setting is not applicable when UsePlatformNTLMAPI is True. The platform NTLM API will always use the current workstation's name.

    Base Config Settings

    BuildInfo:   Information about the product's build.

    When queried, this setting will return a string containing information about the product's build.

    CodePage:   The system code page used for Unicode to Multibyte translations.

    The default code page is Unicode UTF-8 (65001).

    The following is a list of valid code page identifiers:

    IdentifierName
    037IBM EBCDIC - U.S./Canada
    437OEM - United States
    500IBM EBCDIC - International
    708Arabic - ASMO 708
    709Arabic - ASMO 449+, BCON V4
    710Arabic - Transparent Arabic
    720Arabic - Transparent ASMO
    737OEM - Greek (formerly 437G)
    775OEM - Baltic
    850OEM - Multilingual Latin I
    852OEM - Latin II
    855OEM - Cyrillic (primarily Russian)
    857OEM - Turkish
    858OEM - Multilingual Latin I + Euro symbol
    860OEM - Portuguese
    861OEM - Icelandic
    862OEM - Hebrew
    863OEM - Canadian-French
    864OEM - Arabic
    865OEM - Nordic
    866OEM - Russian
    869OEM - Modern Greek
    870IBM EBCDIC - Multilingual/ROECE (Latin-2)
    874ANSI/OEM - Thai (same as 28605, ISO 8859-15)
    875IBM EBCDIC - Modern Greek
    932ANSI/OEM - Japanese, Shift-JIS
    936ANSI/OEM - Simplified Chinese (PRC, Singapore)
    949ANSI/OEM - Korean (Unified Hangul Code)
    950ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
    1026IBM EBCDIC - Turkish (Latin-5)
    1047IBM EBCDIC - Latin 1/Open System
    1140IBM EBCDIC - U.S./Canada (037 + Euro symbol)
    1141IBM EBCDIC - Germany (20273 + Euro symbol)
    1142IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
    1143IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
    1144IBM EBCDIC - Italy (20280 + Euro symbol)
    1145IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
    1146IBM EBCDIC - United Kingdom (20285 + Euro symbol)
    1147IBM EBCDIC - France (20297 + Euro symbol)
    1148IBM EBCDIC - International (500 + Euro symbol)
    1149IBM EBCDIC - Icelandic (20871 + Euro symbol)
    1200Unicode UCS-2 Little-Endian (BMP of ISO 10646)
    1201Unicode UCS-2 Big-Endian
    1250ANSI - Central European
    1251ANSI - Cyrillic
    1252ANSI - Latin I
    1253ANSI - Greek
    1254ANSI - Turkish
    1255ANSI - Hebrew
    1256ANSI - Arabic
    1257ANSI - Baltic
    1258ANSI/OEM - Vietnamese
    1361Korean (Johab)
    10000MAC - Roman
    10001MAC - Japanese
    10002MAC - Traditional Chinese (Big5)
    10003MAC - Korean
    10004MAC - Arabic
    10005MAC - Hebrew
    10006MAC - Greek I
    10007MAC - Cyrillic
    10008MAC - Simplified Chinese (GB 2312)
    10010MAC - Romania
    10017MAC - Ukraine
    10021MAC - Thai
    10029MAC - Latin II
    10079MAC - Icelandic
    10081MAC - Turkish
    10082MAC - Croatia
    12000Unicode UCS-4 Little-Endian
    12001Unicode UCS-4 Big-Endian
    20000CNS - Taiwan
    20001TCA - Taiwan
    20002Eten - Taiwan
    20003IBM5550 - Taiwan
    20004TeleText - Taiwan
    20005Wang - Taiwan
    20105IA5 IRV International Alphabet No. 5 (7-bit)
    20106IA5 German (7-bit)
    20107IA5 Swedish (7-bit)
    20108IA5 Norwegian (7-bit)
    20127US-ASCII (7-bit)
    20261T.61
    20269ISO 6937 Non-Spacing Accent
    20273IBM EBCDIC - Germany
    20277IBM EBCDIC - Denmark/Norway
    20278IBM EBCDIC - Finland/Sweden
    20280IBM EBCDIC - Italy
    20284IBM EBCDIC - Latin America/Spain
    20285IBM EBCDIC - United Kingdom
    20290IBM EBCDIC - Japanese Katakana Extended
    20297IBM EBCDIC - France
    20420IBM EBCDIC - Arabic
    20423IBM EBCDIC - Greek
    20424IBM EBCDIC - Hebrew
    20833IBM EBCDIC - Korean Extended
    20838IBM EBCDIC - Thai
    20866Russian - KOI8-R
    20871IBM EBCDIC - Icelandic
    20880IBM EBCDIC - Cyrillic (Russian)
    20905IBM EBCDIC - Turkish
    20924IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
    20932JIS X 0208-1990 & 0121-1990
    20936Simplified Chinese (GB2312)
    21025IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
    21027Extended Alpha Lowercase
    21866Ukrainian (KOI8-U)
    28591ISO 8859-1 Latin I
    28592ISO 8859-2 Central Europe
    28593ISO 8859-3 Latin 3
    28594ISO 8859-4 Baltic
    28595ISO 8859-5 Cyrillic
    28596ISO 8859-6 Arabic
    28597ISO 8859-7 Greek
    28598ISO 8859-8 Hebrew
    28599ISO 8859-9 Latin 5
    28605ISO 8859-15 Latin 9
    29001Europa 3
    38598ISO 8859-8 Hebrew
    50220ISO 2022 Japanese with no halfwidth Katakana
    50221ISO 2022 Japanese with halfwidth Katakana
    50222ISO 2022 Japanese JIS X 0201-1989
    50225ISO 2022 Korean
    50227ISO 2022 Simplified Chinese
    50229ISO 2022 Traditional Chinese
    50930Japanese (Katakana) Extended
    50931US/Canada and Japanese
    50933Korean Extended and Korean
    50935Simplified Chinese Extended and Simplified Chinese
    50936Simplified Chinese
    50937US/Canada and Traditional Chinese
    50939Japanese (Latin) Extended and Japanese
    51932EUC - Japanese
    51936EUC - Simplified Chinese
    51949EUC - Korean
    51950EUC - Traditional Chinese
    52936HZ-GB2312 Simplified Chinese
    54936Windows XP: GB18030 Simplified Chinese (4 Byte)
    57002ISCII Devanagari
    57003ISCII Bengali
    57004ISCII Tamil
    57005ISCII Telugu
    57006ISCII Assamese
    57007ISCII Oriya
    57008ISCII Kannada
    57009ISCII Malayalam
    57010ISCII Gujarati
    57011ISCII Punjabi
    65000Unicode UTF-7
    65001Unicode UTF-8
    The following is a list of valid code page identifiers for Mac OS only:
    IdentifierName
    1ASCII
    2NEXTSTEP
    3JapaneseEUC
    4UTF8
    5ISOLatin1
    6Symbol
    7NonLossyASCII
    8ShiftJIS
    9ISOLatin2
    10Unicode
    11WindowsCP1251
    12WindowsCP1252
    13WindowsCP1253
    14WindowsCP1254
    15WindowsCP1250
    21ISO2022JP
    30MacOSRoman
    10UTF16String
    0x90000100UTF16BigEndian
    0x94000100UTF16LittleEndian
    0x8c000100UTF32String
    0x98000100UTF32BigEndian
    0x9c000100UTF32LittleEndian
    65536Proprietary

    LicenseInfo:   Information about the current license.

    When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

    • Product: The product the license is for.
    • Product Key: The key the license was generated from.
    • License Source: Where the license was found (e.g., RuntimeLicense, License File).
    • License Type: The type of license installed (e.g., Royalty Free, Single Server).
    • Last Valid Build: The last valid build number for which the license will work.
    MaskSensitiveData:   Whether sensitive data is masked in log messages.

    In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to True to mask sensitive data. The default is True.

    This setting only works on these components: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

    UseFIPSCompliantAPI:   Tells the component whether or not to use FIPS certified APIs.

    When set to True, the component will utilize the underlying operating system's certified APIs. Java editions, regardless of OS, utilize Bouncy Castle Federal Information Processing Standards (FIPS), while all other Windows editions make use of Microsoft security libraries.

    FIPS mode can be enabled by setting the UseFIPSCompliantAPI configuration setting to True. This is a static setting that applies to all instances of all components of the toolkit within the process. It is recommended to enable or disable this setting once before the component has been used to establish a connection. Enabling FIPS while an instance of the component is active and connected may result in unexpected behavior.

    For more details, please see the FIPS 140-2 Compliance article.

    Note: This setting is applicable only on Windows.

    Note: Enabling FIPS compliance requires a special license; please contact sales@nsoftware.com for details.

    UseInternalSecurityAPI:   Whether or not to use the system security libraries or an internal implementation.

    When set to False, the component will use the system security libraries by default to perform cryptographic functions where applicable.

    Setting this configuration setting to True tells the component to use the internal implementation instead of using the system security libraries.

    This setting is set to False by default on all platforms.

    Trappable Errors (NTLM Component)

    NTLM Errors

    101   Component is busy.
    102   Username and password must be specified.
    103   ChallengeToken must be specified.