IPWorks SNMP 2022 Delphi Edition
Version 22.0 [Build 8369]

SNMPTCPAgent Component

Properties   Methods   Events   Config Settings   Errors  

The SNMPTCPAgent component is used to implement TCP-based SNMP Agent Applications.

Syntax

TipnSNMPTCPAgent

Remarks

The SNMPTCPAgent component implements a TCP-based standard SNMP Agent as specified in the SNMP RFCs. The component supports SNMP v1, v2c, and v3.

The component provides both encoding/decoding and transport capabilities, making the task of developing a custom SNMP agent as simple as setting a few key properties and handling a few events. SNMP data such as SNMP object id-s (OID-s) are exchanged as text strings, thus further simplifying the task of handling them.

The component is activated/deactivated by calling the Activate or Deactivate method. These methods enable or disable sending and receiving. The activation status can be found in the Active property.

The component operates asynchronously. Requests are received through events such as GetRequest, GetBulkRequest, GetNextRequest, etc. and the corresponding responses are automatically sent when the events return. Traps are sent through the SendTrap method.

SNMPv3 USM security passwords are requested through the GetUserPassword event, and event parameters such as User and SecurityLevel provide information about the security attributes of received requests, and enable granular decision capability about what to provide and what not to provide. The SendSecureTrap method is used to send authenticated (secure) SNMPv3 traps.

The AddUser, RemoveUser, ShowCache, and ClearCache methods are used to manage an internal authentication cache. This internal cache can be used as an alternative to the GetUserPassword event, automatically checking the cache against the security parameters provided in the request signature.

SNMP OIDs, types, and values are provided in the Objects collection of SNMP objects for both sent and received packets.

Other packet information is provided through corresponding event parameters, such as Community, or RequestId.

Property List


The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

AcceptDataEnables or disables data reception.
ActiveIndicates whether the component is active.
LocalEngineIdThe Engine Id of the SNMP Agent.
LocalHostThe name of the local host or user-assigned IP interface through which connections are initiated or accepted.
LocalPortThe port in the local host where the component listens.
ObjectsThe objects in the current request.
RequestIdThe request-id to mark outgoing packets with.
SNMPVersionVersion of SNMP used for outgoing requests (traps).
SSLAcceptServerCertEncodedThis is the certificate (PEM/base64 encoded).
SSLAuthenticateClientsIf set to True, the server asks the client(s) for a certificate.
SSLCertEncodedThis is the certificate (PEM/base64 encoded).
SSLCertStoreThis is the name of the certificate store for the client certificate.
SSLCertStorePasswordIf the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
SSLCertStoreTypeThis is the type of certificate store for this certificate.
SSLCertSubjectThis is the subject of the certificate used for client authentication.
SSLEnabledWhether TLS/SSL is enabled.
SSLServerCertEncodedThis is the certificate (PEM/base64 encoded).
SysUpTimeTime passed since the agent was initialized (in hundredths of a second).

Method List


The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

ActivateActivates the component.
AddUserAdds a user to the internal authentication cache.
ClearCacheClears the internal authentication database.
ConfigSets or retrieves a configuration setting.
DeactivateDeactivates the component.
DoEventsProcesses events from the internal message queue.
HashPasswordsHashes all passwords in the cache.
RemoveUserRemoves the user specified by User from the internal authentication cache.
ResetClears the object arrays.
SendResponseSends a response packet to a Get, Get-Next, Get-Bulk, or Set request.
SendSecureResponseSends an authenticated and/or encrypted SNMPv3 response.
SendSecureTrapSends an authenticated and/or encrypted SNMPv3 trap.
SendTrapSends an SNMP Trap.
ShowCacheLists all entries in the internal user authentication cache.
ValueReturns the value corresponding to an OID.

Event List


The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

BadPacketFired for erroneous and/or malformed messages.
CacheEntryShows in the internal cache.
ConnectedFired immediately after a connection completes (or fails).
ConnectionStatusThis event is fired to indicate changes in the connection state.
DisconnectedFired when a connection is closed.
DiscoveryRequestFired when an SNMPv3 discovery packet is received.
ErrorInformation about errors during data delivery.
GetBulkRequestFired when a GetBulkRequest packet is received.
GetNextRequestFired when a GetNextRequest packet is received.
GetRequestFired when a GetRequest packet is received.
GetUserPasswordRetrieves a password associated with a user.
GetUserSecurityLevelSets the security level for an incoming packet.
HashPasswordFired before and after a password is hashed.
PacketTraceFired for every packet sent or received.
ReadyToSendFired when the component is ready to send data.
ReportFired when a Report packet is received.
SetRequestFired when a SetRequest packet is received.
SSLClientAuthenticationFired when the client presents its credentials to the server.
SSLServerAuthenticationFires when connecting to the server.
SSLStatusShows the progress of the secure connection.

Config Settings


The following is a list of config settings for the component with short descriptions. Click on the links for further details.

AuthenticationKeyThe key to use for authentication.
CompatibilityModeWhether to operate the component in a specific compatibility mode.
ContextEngineIdSets the context engine id of the SNMP entity.
ContextNameSets the context name of the SNMP entity.
DecryptLogPacketsWhether to decrypt logged packets.
EncryptionKeyThe key to use for encryption.
ForceLocalPortForces the component to bind to a specific port.
MsgMaxSizeThe maximum supported message size.
RespondFromDestIPWhether to respond from the IP address that the request was sent to.
SourceAddressThe source address of the received packet.
SourcePortThe source port of the received packet.
TimeWindowThe time window used for SNMPv3 timeliness checking (authentication).
TrapAgentAddressThe address of the object generating the trap.
TrapCommunityThe value of the Community parameter for SNMP traps.
TrapEnterpriseThe type of the object generating the trap.
TrapPortThe port where SNMP traps are sent.
CloseStreamAfterTransferIf true, the component will close the upload or download stream after the transfer.
ConnectionTimeoutSets a separate timeout value for establishing a connection.
FirewallAutoDetectTells the component whether or not to automatically detect and use firewall system settings, if available.
FirewallHostName or IP address of firewall (optional).
FirewallPasswordPassword to be used if authentication is to be used when connecting through the firewall.
FirewallPortThe TCP port for the FirewallHost;.
FirewallTypeDetermines the type of firewall to connect through.
FirewallUserA user name if authentication is to be used connecting through a firewall.
KeepAliveIntervalThe retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTimeThe inactivity time in milliseconds before a TCP keep-alive packet is sent.
LingerWhen set to True, connections are terminated gracefully.
LingerTimeTime in seconds to have the connection linger.
LocalHostThe name of the local host through which connections are initiated or accepted.
LocalPortThe port in the local host where the component binds.
MaxLineLengthThe maximum amount of data to accumulate when no EOL is found.
MaxTransferRateThe transfer rate limit in bytes per second.
ProxyExceptionsListA semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAliveDetermines whether or not the keep alive socket option is enabled.
TcpNoDelayWhether or not to delay when sending packets.
UseIPv6Whether to use IPv6.
LogSSLPacketsControls whether SSL packets are logged when using the internal security API.
OpenSSLCADirThe path to a directory containing CA certificates.
OpenSSLCAFileName of the file containing the list of CA's trusted by your application.
OpenSSLCipherListA string that controls the ciphers to be used by SSL.
OpenSSLPrngSeedDataThe data to seed the pseudo random number generator (PRNG).
ReuseSSLSessionDetermines if the SSL session is reused.
SSLCACertsA newline separated list of CA certificate to use during SSL client authentication.
SSLCheckCRLWhether to check the Certificate Revocation List for the server certificate.
SSLCipherStrengthThe minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuitesThe cipher suite to be used in an SSL negotiation.
SSLEnabledProtocolsUsed to enable/disable the supported security protocols.
SSLEnableRenegotiationWhether the renegotiation_info SSL extension is supported.
SSLIncludeCertChainWhether the entire certificate chain is included in the SSLServerAuthentication event.
SSLKeyLogFileThe location of a file where per-session secrets are written for debugging purposes.
SSLNegotiatedCipherReturns the negotiated ciphersuite.
SSLNegotiatedCipherStrengthReturns the negotiated ciphersuite strength.
SSLNegotiatedCipherSuiteReturns the negotiated ciphersuite.
SSLNegotiatedKeyExchangeReturns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrengthReturns the negotiated key exchange algorithm strength.
SSLNegotiatedVersionReturns the negotiated protocol version.
SSLSecurityFlagsFlags that control certificate verification.
SSLServerCACertsA newline separated list of CA certificate to use during SSL server certificate validation.
TLS12SignatureAlgorithmsDefines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.
TLS12SupportedGroupsThe supported groups for ECC.
TLS13KeyShareGroupsThe groups for which to pregenerate key shares.
TLS13SignatureAlgorithmsThe allowed certificate signature algorithms.
TLS13SupportedGroupsThe supported groups for (EC)DHE key exchange.
AbsoluteTimeoutDetermines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallDataUsed to send extra data to the firewall.
InBufferSizeThe size in bytes of the incoming queue of the socket.
OutBufferSizeThe size in bytes of the outgoing queue of the socket.
BuildInfoInformation about the product's build.
CodePageThe system code page used for Unicode to Multibyte translations.
LicenseInfoInformation about the current license.
UseInternalSecurityAPITells the component whether or not to use the system security libraries or an internal implementation.

AcceptData Property (SNMPTCPAgent Component)

Enables or disables data reception.

Syntax

property AcceptData: Boolean read get_AcceptData write set_AcceptData;

Default Value

true

Remarks

Setting the property to False temporarily disables data reception. Setting the property to True re-enables data reception.

This property is not available at design time.

Active Property (SNMPTCPAgent Component)

Indicates whether the component is active.

Syntax

property Active: Boolean read get_Active write set_Active;

Default Value

false

Remarks

This property indicates whether the component is currently active and can send or receive data.

The component will be automatically activated if it is not already and you attempt to perform an operation which requires the component to be active.

Note: Use the Activate or Deactivate method to control whether the component is active.

This property is not available at design time.

LocalEngineId Property (SNMPTCPAgent Component)

The Engine Id of the SNMP Agent.

Syntax

property LocalEngineId: String read get_LocalEngineId write set_LocalEngineId;
property LocalEngineIdB: TBytes read get_LocalEngineIdB write set_LocalEngineIdB;

Default Value

''

Remarks

This property is only used for SNMPv3 packets (when SNMPVersion is 3).

LocalHost Property (SNMPTCPAgent Component)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

property LocalHost: String read get_LocalHost write set_LocalHost;

Default Value

''

Remarks

The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the component initiate connections (or accept in the case of server components) only through that interface.

If the component is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

LocalPort Property (SNMPTCPAgent Component)

The port in the local host where the component listens.

Syntax

property LocalPort: Integer read get_LocalPort write set_LocalPort;

Default Value

161

Remarks

The LocalPort property must be set before the component is activated (Active is set to True). It instructs the component to bind to a specific port (or communication endpoint) in the local machine (default 161).

You may also set LocalPort to 0. This allows the TCP/IP stack to choose a port at random. The value chosen is provided via the LocalPort property after the component is activated through the Active property.

LocalPort cannot be changed once the component is Active. Any attempt to set the LocalPort property when the component is Active will generate an error.

Note: on macOS and iOS, root permissions are required to set LocalPort to any value below 1024.

Objects Property (SNMPTCPAgent Component)

The objects in the current request.

Syntax

property Objects: TipnSNMPObjectList read get_Objects write set_Objects;

Remarks

The SNMP objects being sent or received in the current request. The collection is first cleared, then populated every time an SNMP packet is received. It is also used to create outgoing SNMP packets.

RequestId Property (SNMPTCPAgent Component)

The request-id to mark outgoing packets with.

Syntax

property RequestId: Integer read get_RequestId write set_RequestId;

Default Value

1

Remarks

If a custom value is needed for RequestId, the property must be set before sending the request. The component increments RequestId automatically after sending each packet.

This property is not available at design time.

SNMPVersion Property (SNMPTCPAgent Component)

Version of SNMP used for outgoing requests (traps).

Syntax

property SNMPVersion: TipnTSNMPVersions read get_SNMPVersion write set_SNMPVersion;
TipnTSNMPVersions = ( snmpverV1, snmpverV2c, snmpverV3 );

Default Value

snmpverV2c

Remarks

This property takes one of the following values:

snmpverV1 (1)SNMP Version 1.
snmpverV2c (2)SNMP Version 2c.
snmpverV3 (3)SNMP Version 3.

SSLAcceptServerCertEncoded Property (SNMPTCPAgent Component)

This is the certificate (PEM/base64 encoded).

Syntax

property SSLAcceptServerCertEncoded: String read get_SSLAcceptServerCertEncoded write set_SSLAcceptServerCertEncoded;
property SSLAcceptServerCertEncodedB: TBytes read get_SSLAcceptServerCertEncodedB write set_SSLAcceptServerCertEncodedB;

Default Value

''

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The Store and Subject properties also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

This property is not available at design time.

SSLAuthenticateClients Property (SNMPTCPAgent Component)

If set to True, the server asks the client(s) for a certificate.

Syntax

property SSLAuthenticateClients: Boolean read get_SSLAuthenticateClients write set_SSLAuthenticateClients;

Default Value

false

Remarks

This property is used in conjunction with the SSLClientAuthentication event. Please refer to the documentation of the SSLClientAuthentication event for details.

SSLCertEncoded Property (SNMPTCPAgent Component)

This is the certificate (PEM/base64 encoded).

Syntax

property SSLCertEncoded: String read get_SSLCertEncoded write set_SSLCertEncoded;
property SSLCertEncodedB: TBytes read get_SSLCertEncodedB write set_SSLCertEncodedB;

Default Value

''

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The Store and Subject properties also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

This property is not available at design time.

SSLCertStore Property (SNMPTCPAgent Component)

This is the name of the certificate store for the client certificate.

Syntax

property SSLCertStore: String read get_SSLCertStore write set_SSLCertStore;
property SSLCertStoreB: TBytes read get_SSLCertStoreB write set_SSLCertStoreB;

Default Value

'MY'

Remarks

This is the name of the certificate store for the client certificate.

The StoreType property denotes the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Store is used in conjunction with the Subject property to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject property for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

SSLCertStorePassword Property (SNMPTCPAgent Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

property SSLCertStorePassword: String read get_SSLCertStorePassword write set_SSLCertStorePassword;

Default Value

''

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

SSLCertStoreType Property (SNMPTCPAgent Component)

This is the type of certificate store for this certificate.

Syntax

property SSLCertStoreType: TipnCertStoreTypes read get_SSLCertStoreType write set_SSLCertStoreType;
TipnCertStoreTypes = ( cstUser, cstMachine, cstPFXFile, cstPFXBlob, cstJKSFile, cstJKSBlob, cstPEMKeyFile, cstPEMKeyBlob, cstPublicKeyFile, cstPublicKeyBlob, cstSSHPublicKeyBlob, cstP7BFile, cstP7BBlob, cstSSHPublicKeyFile, cstPPKFile, cstPPKBlob, cstXMLFile, cstXMLBlob, cstJWKFile, cstJWKBlob, cstSecurityKey, cstBCFKSFile, cstBCFKSBlob, cstAuto );

Default Value

cstUser

Remarks

This is the type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used the component will automatically determine the type. This property can take one of the following values:

0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: this store type is not available in Java.
1 (cstMachine)For Windows, this specifies that the certificate store is a machine store. Note: this store type is not available in Java.
2 (cstPFXFile)The certificate store is the name of a PFX (PKCS12) file containing certificates.
3 (cstPFXBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in PFX (PKCS12) format.
4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: this store type is only available in Java.
5 (cstJKSBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)The certificate store is a string (binary or base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)The certificate store is a string (binary or base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)The certificate store is the name of a PKCS7 file containing certificates.
12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS7 format.
13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
20 (cstSecurityKey)The certificate is present on a physical security key accessible via a PKCS11 interface.

To use a security key the necessary data must first be collected using the CertMgr component. The ListStoreCertificates method may be called after setting CertStoreType to cstSecurityKey, CertStorePassword to the PIN, and CertStore to the full path of the PKCS11 dll. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN.

Code Example: SSH Authentication with Security Key certmgr.CertStoreType = CertStoreTypes.cstSecurityKey; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstSecurityKey, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: this store type is only available in Java and .NET.
22 (cstBCFKSBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: this store type is only available in Java and .NET.
99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

SSLCertSubject Property (SNMPTCPAgent Component)

This is the subject of the certificate used for client authentication.

Syntax

property SSLCertSubject: String read get_SSLCertSubject write set_SSLCertSubject;

Default Value

''

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properites are set. When this property is set, a search is performed in the current certificate store certificate with matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are displayed below.

FieldMeaning
CNCommon Name. This is commonly a host name like www.server.com.
OOrganization
OUOrganizational Unit
LLocality
SState
CCountry
EEmail Address

If a field value contains a comma it must be quoted.

SSLEnabled Property (SNMPTCPAgent Component)

Whether TLS/SSL is enabled.

Syntax

property SSLEnabled: Boolean read get_SSLEnabled write set_SSLEnabled;

Default Value

false

Remarks

This setting specifies whether TLS/SSL is enabled in the component. When False (default) the component operates in plaintext mode. When True TLS/SSL is enabled.

Note: SSL is not currently supported in this product. This setting is reserved for future user.

This property is not available at design time.

SSLServerCertEncoded Property (SNMPTCPAgent Component)

This is the certificate (PEM/base64 encoded).

Syntax

property SSLServerCertEncoded: String read get_SSLServerCertEncoded;
property SSLServerCertEncodedB: TBytes read get_SSLServerCertEncodedB;

Default Value

''

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The Store and Subject properties also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

This property is read-only and not available at design time.

SysUpTime Property (SNMPTCPAgent Component)

Time passed since the agent was initialized (in hundredths of a second).

Syntax

property SysUpTime: Int64 read get_SysUpTime write set_SysUpTime;

Default Value

0

Remarks

This property is used when sending SNMP traps, and it normally provides the time since the system was restarted in 1/100s of a second.

If another value is desired, you may set this property to a custom value. From that point on, SysUpTime will return the value set plus time elapsed.

This property is not available at design time.

Activate Method (SNMPTCPAgent Component)

Activates the component.

Syntax

procedure Activate();

Remarks

This method activates the component and will allow it to send or receive data.

The component will be automatically activated if it is not already and you attempt to perform an operation which requires the component to be active.

Note: Use the Active property to check whether the component is active.

AddUser Method (SNMPTCPAgent Component)

Adds a user to the internal authentication cache.

Syntax

procedure AddUser(User: String; AuthenticationProtocol: Integer; AuthenticationPassword: String; EncryptionAlgorithm: Integer; EncryptionPassword: String);

Remarks

The internal authentication cache can be used as an alternative to the GetUserPassword event, automatically checking the cache against the security parameters provided in the request signature.

The ShowCache method is used to show the contents of the internal authentication cache.

The ClearCache method can be used to completely clear the cache.

Valid Authentication Protocols are:

HMAC-MD5-96 (1)Message-Digest algorithm 5.
HMAC-SHA-96 (2)Secure Hash Algorithm.
HMAC-192-SHA-256 (3)Secure Hash Algorithm.
HMAC-384-SHA-512 (4)Secure Hash Algorithm.

Valid Encryption Algorithms are:

DES (1)Data Encryption Standard.
AES (2)Advanced Encryption Standard with key length of 128.
3DES (3)Triple Data Encryption Standard.
AES192 (4)Advanced Encryption Standard with key length of 192.
AES256 (5)Advanced Encryption Standard with key length of 256.

NOTE: Specifying an authentication protocol of 0 is a special case where the component will attempt to verify users with all valid authentication protocols.

ClearCache Method (SNMPTCPAgent Component)

Clears the internal authentication database.

Syntax

procedure ClearCache();

Remarks

All user records are removed from the internal authentication cache as a result of this call.

Config Method (SNMPTCPAgent Component)

Sets or retrieves a configuration setting.

Syntax

function Config(ConfigurationString: String): String;

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Deactivate Method (SNMPTCPAgent Component)

Deactivates the component.

Syntax

procedure Deactivate();

Remarks

This method deactivates the component and will prohibit it from sending and receiving data.

Note: Use the Active property to check whether the component is active.

DoEvents Method (SNMPTCPAgent Component)

Processes events from the internal message queue.

Syntax

procedure DoEvents();

Remarks

When DoEvents is called, the component processes any available events. If no events are available, it waits for a preset period of time, and then returns.

HashPasswords Method (SNMPTCPAgent Component)

Hashes all passwords in the cache.

Syntax

procedure HashPasswords();

Remarks

Forces computation of all passwords hashes in the cache. Used together with the HashPassword event to enable implementations of external password hash storage.

RemoveUser Method (SNMPTCPAgent Component)

Removes the user specified by User from the internal authentication cache.

Syntax

procedure RemoveUser(User: String);

Remarks

The internal authentication cache can be used as an alternative to the GetUserPassword event, automatically checking the cache against the security parameters provided in the request signature.

The ShowCache method is used to show the contents of the internal authentication cache.

The ClearCache method can be used to completely clear the cache.

Reset Method (SNMPTCPAgent Component)

Clears the object arrays.

Syntax

procedure Reset();

Remarks

Clears the object arrays, and sets the trap and error properties to their default values. This is useful for reinitializing all the properties that are used to create outgoing packets before building a new packet.

Note: SNMPVersion will be reset to snmpverV2c (2).

SendResponse Method (SNMPTCPAgent Component)

Sends a response packet to a Get, Get-Next, Get-Bulk, or Set request.

Syntax

procedure SendResponse(RemoteHost: String; RemotePort: Integer; RequestId: Integer; Community: String; ErrorStatus: Integer; ErrorIndex: Integer);

Remarks

Use this method to send asynchronous response packets. A valid RequestId must be specified. SendResponse sends an unauthenticated response packet. Depending upon the value of the SNMPVersion property, the packet is constructed as an SNMPv1, SNMPv2c, or SNMPv3 (unauthenticated) response PDU. To send authenticated or encrypted SNMPv3 responses, use SendSecureResponse

The RemoteHost and RemotePort parameters are used to determine where the response is to be sent. The object identifiers, types, and values for the request are taken from the Objects collection. The RequestId, Community, ErrorStatus, and ErrorIndex parameters are used to specify other properties of the response.

SendSecureResponse Method (SNMPTCPAgent Component)

Sends an authenticated and/or encrypted SNMPv3 response.

Syntax

procedure SendSecureResponse(RemoteHost: String; RemotePort: Integer; RequestId: Integer; MessageId: Integer; ErrorStatus: Integer; ErrorIndex: Integer; User: String; AuthenticationProtocol: Integer; AuthenticationPassword: String; EncryptionAlgorithm: Integer; EncryptionPassword: String);

Remarks

Similar to the SendResponse method except that User, Authentication Protocol, and AuthenticationPassword are used to authenticate the response. EncryptionAlgorithm and EncryptionPassword (if not empty) are used to encrypt the response.

The MessageId argument must match the MessageId parameter obtained from the GetRequest, GetNextRequest, SetRequest, or GetBulkRequest event.

The user and password arguments used to send the response will be added to the internal user cache. If the user is already in the cache, its passwords will be updated with those supplied.

Valid Authentication Protocols are:

HMAC-MD5-96 (1)Message-Digest algorithm 5.
HMAC-SHA-96 (2)Secure Hash Algorithm.
HMAC-192-SHA-256 (3)Secure Hash Algorithm.
HMAC-384-SHA-512 (4)Secure Hash Algorithm.

Valid Encryption Algorithms are:

DES (1)Data Encryption Standard.
AES (2)Advanced Encryption Standard with key length of 128.
3DES (3)Triple Data Encryption Standard.
AES192 (4)Advanced Encryption Standard with key length of 192.
AES256 (5)Advanced Encryption Standard with key length of 256.

SendSecureTrap Method (SNMPTCPAgent Component)

Sends an authenticated and/or encrypted SNMPv3 trap.

Syntax

procedure SendSecureTrap(RemoteHost: String; TrapOID: String; User: String; AuthenticationProtocol: Integer; AuthenticationPassword: String; EncryptionAlgorithm: Integer; EncryptionPassword: String);

Remarks

Similar to the SendTrap method except that User, AuthenticationPassword, and Authentication Protocol are used to authenticate the trap. EncryptionPassword (if not empty) and EncryptionAlgorithm are used to encrypt the message.

The user and password arguments used to send the trap will be added to the internal user cache. If the user is already in the cache, its passwords will be updated with those supplied.

Valid Authentication Protocols are:

HMAC-MD5-96 (1)Message-Digest algorithm 5.
HMAC-SHA-96 (2)Secure Hash Algorithm.
HMAC-192-SHA-256 (3)Secure Hash Algorithm.
HMAC-384-SHA-512 (4)Secure Hash Algorithm.

Valid Encryption Algorithms are:

DES (1)Data Encryption Standard.
AES (2)Advanced Encryption Standard with key length of 128.
3DES (3)Triple Data Encryption Standard.
AES192 (4)Advanced Encryption Standard with key length of 192.
AES256 (5)Advanced Encryption Standard with key length of 256.

SendTrap Method (SNMPTCPAgent Component)

Sends an SNMP Trap.

Syntax

procedure SendTrap(RemoteHost: String; TrapOID: String);

Remarks

Depending upon the value of the SNMPVersion property, the packet is constructed as an SNMPv1 or SNMPv2 Trap PDU. The following configuration settings provide more control about how traps are generated: TrapPort, TrapAgentAddress, TrapCommunity, TrapEnterprise. The SysUpTime property provides the trap timestamp.

SendTrap sends an unauthenticated trap. The SendSecureTrap method is used to send authenticated SNMPv3 traps.

If any values are provided in the Objects collection, they are sent unchanged. In the case of an SNMPv2 or SNMPv3 Trap, if Objects has a count that is equal to 0, the following values are set: sysUpTime.0 equal to SysUpTime and snmpTrapOID.0 equal to TrapOID.

For SNMPv2 and SNMPv3 Traps, TrapOID must contain the full OID of the Trap. For SNMPv1, TrapOID must be a string of the form "generic.specific" where generic and specific are numeric values providing the Trap Generic Type and Specific Type.

For SNMPv1, TrapOID must be of the form "GenericTrap.SpecificTrap". These values are sent in the PDU header. TrapAgentAddress and TrapEnterprise are taken from the corresponding configuration settings.

Additionally, the following symbolic values are recognized and translated as follows:

Trap Name OID (SNMPv2 and above) SNMPv1 GenericType
coldStart 1.3.6.1.6.3.1.1.5.1 0
warmStart 1.3.6.1.6.3.1.1.5.2 1
linkDown 1.3.6.1.6.3.1.1.5.3 2
linkUp 1.3.6.1.6.3.1.1.5.4 3
authenticationFailure 1.3.6.1.6.3.1.1.5.5 4
egpNeighborLoss 1.3.6.1.6.3.1.1.5.6 5
enterpriseSpecific 1.3.6.1.6.3.1.1.5.7 6

ShowCache Method (SNMPTCPAgent Component)

Lists all entries in the internal user authentication cache.

Syntax

procedure ShowCache();

Remarks

A CacheEntry event is fired for every record in the internal user authentication cache.

The internal authentication cache can be used as an alternative to the GetUserPassword event, automatically checking the cache against the security parameters provided in the request signature.

The ShowCache method is used to show the contents of the internal authentication cache.

The ClearCache method can be used to completely clear the cache.

Value Method (SNMPTCPAgent Component)

Returns the value corresponding to an OID.

Syntax

function Value(OID: String): String;

Remarks

If the OID does not exist in the Objects collection, a trappable error is generated.

Please refer to the SNMPObject type for more information.

BadPacket Event (SNMPTCPAgent Component)

Fired for erroneous and/or malformed messages.

Syntax

type TBadPacketEvent = procedure (
  Sender: TObject;
  Packet: String;
  PacketB: TBytes;
  const SourceAddress: String;
  SourcePort: Integer;
  ErrorCode: Integer;
  const ErrorDescription: String;
  var Report: Boolean
) of Object;

property OnBadPacket: TBadPacketEvent read FOnBadPacket write FOnBadPacket;

Remarks

The full message is provided in the Packet parameter.

The BadPacket event is also fired when authentication fails for received packets due to a bad password or other reasons.

If the Report parameter is set to True, an unauthenticated error report will be sent to the client, otherwise the packet will be silently ignored.

Please refer to the GetUserPassword event for more information concerning SNMPv3 authentication.

CacheEntry Event (SNMPTCPAgent Component)

Shows in the internal cache.

Syntax

type TCacheEntryEvent = procedure (
  Sender: TObject;
  const User: String;
  const AuthenticationProtocol: String;
  const AuthenticationPassword: String;
  const EncryptionAlgorithm: String;
  const EncryptionPassword: String
) of Object;

property OnCacheEntry: TCacheEntryEvent read FOnCacheEntry write FOnCacheEntry;

Remarks

CacheEntry events are triggered by a call to ShowCache. One event is fired for each user.

Connected Event (SNMPTCPAgent Component)

Fired immediately after a connection completes (or fails).

Syntax

type TConnectedEvent = procedure (
  Sender: TObject;
  const RemoteAddress: String;
  RemotePort: Integer;
  StatusCode: Integer;
  const Description: String
) of Object;

property OnConnected: TConnectedEvent read FOnConnected write FOnConnected;

Remarks

This event fires after a connection completes or fails.

StatusCode is the value returned by the system TCP/IP stack. This will be 0 if the connection was successful.

Description contains a human readable description of the status. This will be "OK" if the connection was successful.

RemoteAddress is the IP address of the remote host.

RemotePort is the port on the remote host.

ConnectionStatus Event (SNMPTCPAgent Component)

This event is fired to indicate changes in the connection state.

Syntax

type TConnectionStatusEvent = procedure (
  Sender: TObject;
  const ConnectionEvent: String;
  StatusCode: Integer;
  const Description: String
) of Object;

property OnConnectionStatus: TConnectionStatusEvent read FOnConnectionStatus write FOnConnectionStatus;

Remarks

The ConnectionStatus event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

Firewall connection complete.
Secure Sockets Layer (SSL) or S/Shell handshake complete (where applicable).
Remote host connection complete.
Remote host disconnected.
SSL or S/Shell connection broken.
Firewall host disconnected.

StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack.

Description contains a description of this code. The value of StatusCode is equal to the value of the error.

Disconnected Event (SNMPTCPAgent Component)

Fired when a connection is closed.

Syntax

type TDisconnectedEvent = procedure (
  Sender: TObject;
  const RemoteAddress: String;
  RemotePort: Integer;
  StatusCode: Integer;
  const Description: String
) of Object;

property OnDisconnected: TDisconnectedEvent read FOnDisconnected write FOnDisconnected;

Remarks

This event fires after a connection is broken.

StatusCode is the value returned by the system TCP/IP stack. This will be 0 if the connection was broken normally.

Description contains a human readable description of the status. This will be "OK" if the connection was broken normally.

RemoteAddress is the IP address of the remote host.

RemotePort is the port on the remote host.

DiscoveryRequest Event (SNMPTCPAgent Component)

Fired when an SNMPv3 discovery packet is received.

Syntax

type TDiscoveryRequestEvent = procedure (
  Sender: TObject;
  EngineId: String;
  EngineIdB: TBytes;
  EngineBoots: Integer;
  EngineTime: Integer;
  const User: String;
  SecurityLevel: Integer;
  const SourceAddress: String;
  SourcePort: Integer;
  var Respond: Boolean
) of Object;

property OnDiscoveryRequest: TDiscoveryRequestEvent read FOnDiscoveryRequest write FOnDiscoveryRequest;

Remarks

EngineId, EngineBoots, EngineTime, and User are the values received from SourceAddress.

For SNMPv3, the User parameter shows the user that was supplied with the packet. This parameter MUST be used together with the SecurityLevel parameter which shows the level of security in the message.

The SecurityLevel parameter shows whether the request has been authenticated. If SecurityLevel is 0, the request has NOT been authenticated (i.e. the packet signature has not been verified). For an authenticated, non encrypted request, SecurityLevel is 1. For an authenticated and encrypted request, SecurityLevel is 2.

Respond is True by default, and will automatically send a response using the value in LocalEngineId. To suppress the response, set Respond to False.

The value returned to SourceAddress for EngineBoots is always 0, and EngineTime is the number of seconds since January 1st, 1970 (GMT).

Error Event (SNMPTCPAgent Component)

Information about errors during data delivery.

Syntax

type TErrorEvent = procedure (
  Sender: TObject;
  ErrorCode: Integer;
  const Description: String
) of Object;

property OnError: TErrorEvent read FOnError write FOnError;

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

GetBulkRequest Event (SNMPTCPAgent Component)

Fired when a GetBulkRequest packet is received.

Syntax

type TGetBulkRequestEvent = procedure (
  Sender: TObject;
  RequestId: Integer;
  MessageId: Integer;
  SNMPVersion: Integer;
  const Community: String;
  const User: String;
  SecurityLevel: Integer;
  const SourceAddress: String;
  SourcePort: Integer;
  NonRepeaters: Integer;
  MaxRepetitions: Integer;
  var ErrorIndex: Integer;
  var ErrorStatus: Integer;
  const ErrorDescription: String;
  var Respond: Boolean
) of Object;

property OnGetBulkRequest: TGetBulkRequestEvent read FOnGetBulkRequest write FOnGetBulkRequest;

Remarks

This is only available for SNMP versions 2 and 3.

The list of variables in the SNMP packet, including optional values and types, is provided through the Objects collection. Each object is of type SNMPObject. This type describes the Oid, ObjectType, and Value of each SNMP object. These variables must be copied to another location before the event has completed executing, or they may be overridden by other events.

The SourceAddress and SourcePort parameters show the address and port of the sender as reported by the TCP/IP stack.

The MessageId parameter identifies the received request.

For SNMPv3, the User parameter shows the user that was supplied with the packet. This parameter MUST be used together with the SecurityLevel parameter which shows the level of security in the message.

The SecurityLevel parameter shows whether the request has been authenticated. If SecurityLevel is 0, the request has NOT been authenticated (i.e. the packet signature has not been verified). For an authenticated, non encrypted request, SecurityLevel is 1. For an authenticated and encrypted request, SecurityLevel is 2.

To send a response, the Respond parameter must be set to true. By default, this value is false, which means no response will be sent. The ErrorStatus parameter may also be set to a valid SNMP status code (the default value is 0, which represents no error).

The following is a list of valid SNMP status code values:

0 (noError) No error.
1 (tooBig) The response cannot fit in a single SNMP message.
2 (noSuchName) Variable does not exist.
3 (badValue) Invalid value or syntax.
4 (readOnly) Variable is read-only.
5 (genError) Other error (SNMPv1).
6 (noAccess) Access denied.
7 (wrongType) Wrong object type.
8 (wrongLength) Wrong length.
9 (wrongEncoding) Wrong encoding.
10 (wrongValue) Wrong value.
11 (noCreation) No creation.
12 (inconsistentValue) Inconsistent value.
13 (resourceUnavailable) Resource unavailable.
14 (commitFailed) Commit failed.
15 (undoFailed) Undo failed.
16 (authorizationError) Authorization error.
17 (notWritable) Variable is not writable.
18 (inconsistentName) Inconsistent name.

The ErrorIndex parameter indicates the index of the first variable (object) that caused an error. The default value is 0.

Variable indexes start with 0. ErrorIndex has no meaning when ErrorStatus is 0 (no error).

A GetBulkRequest is very similar to a GetNextRequest, the difference is that Getbulk performs a continuous GetNext operation based on the MaxRepitions value. The NonRepeaters value will determine the number of Objects for which a simple GetNext operation should be performed. For the remaining variables, a continuous GetNext operation is performed based on the MaxRepitions value.

So if you send a request containing X objects, the agent will perform N simple GetNext operations and M continuous GetNext operations X - N times. With X being the number of objects received, N being the number of NonRepeaters, and M being the number of MaxRepitions. Thus the SNMPMgr is expecting to receive N + M x (X - N) objects, assuming that each object has M successors.

GetNextRequest Event (SNMPTCPAgent Component)

Fired when a GetNextRequest packet is received.

Syntax

type TGetNextRequestEvent = procedure (
  Sender: TObject;
  RequestId: Integer;
  MessageId: Integer;
  SNMPVersion: Integer;
  const Community: String;
  const User: String;
  SecurityLevel: Integer;
  const SourceAddress: String;
  SourcePort: Integer;
  var ErrorIndex: Integer;
  var ErrorStatus: Integer;
  const ErrorDescription: String;
  var Respond: Boolean
) of Object;

property OnGetNextRequest: TGetNextRequestEvent read FOnGetNextRequest write FOnGetNextRequest;

Remarks

The list of variables in the SNMP packet, including optional values and types, is provided through the Objects collection. Each object is of type SNMPObject. This type describes the Oid, ObjectType, and Value of each SNMP object. These variables must be copied to another location before the event has completed executing, or they may be overridden by other events.

The SourceAddress and SourcePort parameters show the address and port of the sender as reported by the TCP/IP stack.

The MessageId parameter identifies the received request.

For SNMPv3, the User parameter shows the user that was supplied with the packet. This parameter MUST be used together with the SecurityLevel parameter which shows the level of security in the message.

The SecurityLevel parameter shows whether the request has been authenticated. If SecurityLevel is 0, the request has NOT been authenticated (i.e. the packet signature has not been verified). For an authenticated, non encrypted request, SecurityLevel is 1. For an authenticated and encrypted request, SecurityLevel is 2.

To send a response, the Respond parameter must be set to true. By default, this value is false, which means no response will be sent. The ErrorStatus parameter may also be set to a valid SNMP status code (the default value is 0, which represents no error).

The following is a list of valid SNMP status code values:

0 (noError) No error.
1 (tooBig) The response cannot fit in a single SNMP message.
2 (noSuchName) Variable does not exist.
3 (badValue) Invalid value or syntax.
4 (readOnly) Variable is read-only.
5 (genError) Other error (SNMPv1).
6 (noAccess) Access denied.
7 (wrongType) Wrong object type.
8 (wrongLength) Wrong length.
9 (wrongEncoding) Wrong encoding.
10 (wrongValue) Wrong value.
11 (noCreation) No creation.
12 (inconsistentValue) Inconsistent value.
13 (resourceUnavailable) Resource unavailable.
14 (commitFailed) Commit failed.
15 (undoFailed) Undo failed.
16 (authorizationError) Authorization error.
17 (notWritable) Variable is not writable.
18 (inconsistentName) Inconsistent name.

The ErrorIndex parameter indicates the index of the first variable (object) that caused an error. The default value is 0.

Variable indexes start with 0. ErrorIndex has no meaning when ErrorStatus is 0 (no error).

GetRequest Event (SNMPTCPAgent Component)

Fired when a GetRequest packet is received.

Syntax

type TGetRequestEvent = procedure (
  Sender: TObject;
  RequestId: Integer;
  MessageId: Integer;
  SNMPVersion: Integer;
  const Community: String;
  const User: String;
  SecurityLevel: Integer;
  const SourceAddress: String;
  SourcePort: Integer;
  var ErrorIndex: Integer;
  var ErrorStatus: Integer;
  const ErrorDescription: String;
  var Respond: Boolean
) of Object;

property OnGetRequest: TGetRequestEvent read FOnGetRequest write FOnGetRequest;

Remarks

The list of variables in the SNMP packet, including optional values and types, is provided through the Objects collection. Each object is of type SNMPObject. This type describes the Oid, ObjectType, and Value of each SNMP object. These variables must be copied to another location before the event has completed executing, or they may be overridden by other events.

The SourceAddress and SourcePort parameters show the address and port of the sender as reported by the TCP/IP stack.

The MessageId parameter identifies the received request.

For SNMPv3, the User parameter shows the user that was supplied with the packet. This parameter MUST be used together with the SecurityLevel parameter which shows the level of security in the message.

The SecurityLevel parameter shows whether the request has been authenticated. If SecurityLevel is 0, the request has NOT been authenticated (i.e. the packet signature has not been verified). For an authenticated, non encrypted request, SecurityLevel is 1. For an authenticated and encrypted request, SecurityLevel is 2.

To send a response, the Respond parameter must be set to true. By default, this value is false, which means no response will be sent. The ErrorStatus parameter may also be set to a valid SNMP status code (the default value is 0, which represents no error).

The following is a list of valid SNMP status code values:

0 (noError) No error.
1 (tooBig) The response cannot fit in a single SNMP message.
2 (noSuchName) Variable does not exist.
3 (badValue) Invalid value or syntax.
4 (readOnly) Variable is read-only.
5 (genError) Other error (SNMPv1).
6 (noAccess) Access denied.
7 (wrongType) Wrong object type.
8 (wrongLength) Wrong length.
9 (wrongEncoding) Wrong encoding.
10 (wrongValue) Wrong value.
11 (noCreation) No creation.
12 (inconsistentValue) Inconsistent value.
13 (resourceUnavailable) Resource unavailable.
14 (commitFailed) Commit failed.
15 (undoFailed) Undo failed.
16 (authorizationError) Authorization error.
17 (notWritable) Variable is not writable.
18 (inconsistentName) Inconsistent name.

The ErrorIndex parameter indicates the index of the first variable (object) that caused an error. The default value is 0.

Variable indexes start with 0. ErrorIndex has no meaning when ErrorStatus is 0 (no error).

GetUserPassword Event (SNMPTCPAgent Component)

Retrieves a password associated with a user.

Syntax

type TGetUserPasswordEvent = procedure (
  Sender: TObject;
  PasswordType: Integer;
  const User: String;
  var Password: String;
  var Algorithm: Integer
) of Object;

property OnGetUserPassword: TGetUserPasswordEvent read FOnGetUserPassword write FOnGetUserPassword;

Remarks

The GetUserPassword event is fired after initial inspection of SNMPv3 requests.

The type of password required is provided in the PasswordType parameter: 1 for authentication, and 2 for encryption (privacy).

The password corresponding to User (if any) must be provided in the Password parameter. If the password is valid, processing will continue to other events such as GetRequest, SetRequest, etc.

If the PasswordType parameter is 1 (authentication is used), the Algorithm parameter can be set. Possible values are:

ValueAuthentication Algorithm
0 (default)Any
1MD5
2SHA1
3SHA256
4SHA512

If the PasswordType parameter is 2 (encryption is used), the Algorithm parameter must also be set. Possible values are:

ValueEncryption Algorithm
1 (default)DES
2AES
33DES
4AES192
5AES256

If the password does not match the signature in the request, a BadPacket event will be fired, at which point you can decide whether to report the error to the client (see the description of the BadPacket event for more information).

If the User is invalid or unknown, set the password to empty string (default) to ignore the request. This will result in a BadPacket event being fired, at which point you can decide whether to report the error to the client or not.

GetUserSecurityLevel Event (SNMPTCPAgent Component)

Sets the security level for an incoming packet.

Syntax

type TGetUserSecurityLevelEvent = procedure (
  Sender: TObject;
  const User: String;
  EngineId: String;
  EngineIdB: TBytes;
  var SecurityLevel: Integer
) of Object;

property OnGetUserSecurityLevel: TGetUserSecurityLevelEvent read FOnGetUserSecurityLevel write FOnGetUserSecurityLevel;

Remarks

The GetUserSecurityLevel event is fired after the first inspection of each SNMPv3 request. The SecurityLevel parameter determines the level of security for the message.

On entry, the SecurityLevel parameter contains the default security level for User if the user is located in the internal cache, or if the User is not found in the cache, the SecurityLevel will be -1.

The value of SecurityLevel upon exiting the event, determines how the message will be processed:

-1The message will be ignored and a BadPacket event will be fired.
0No security. The message will be processed without any authentication and/or encryption.
1Authentication only. The message will be checked for a valid signature and the GetUserPassword event will be fired to verify the authentication password.
2Authentication and Privacy. The message will be checked for a valid signature and the GetUserPassword event will be fired twice: first to verify the authentication password, and then to verify the privacy password.

HashPassword Event (SNMPTCPAgent Component)

Fired before and after a password is hashed.

Syntax

type THashPasswordEvent = procedure (
  Sender: TObject;
  const Password: String;
  AuthAlgorithm: Integer;
  var Hash: String
) of Object;

property OnHashPassword: THashPasswordEvent read FOnHashPassword write FOnHashPassword;

Remarks

SNMPv3 passwords are hashed in order to obtain authentication and encryption keys. This is an expensive operation, and in certain situations it may be preferable to store the hashed passwords externally and supply them on demand.

If a hash is required, the event fires with an empty string in the Hash parameter. In this case, you can choose to supply a value for the hash and stop the component from computing the hash.

The event also fires every time a hash is computed. In this case, the Hash parameter contains the value of the computed hash.

AuthAlgorithm contains either 1 for HMAC-MD5-96, 2 for HMAC-SHA-96 or 3 for HMAC-192-SHA-256

PacketTrace Event (SNMPTCPAgent Component)

Fired for every packet sent or received.

Syntax

type TPacketTraceEvent = procedure (
  Sender: TObject;
  Packet: String;
  PacketB: TBytes;
  Direction: Integer;
  const PacketAddress: String;
  PacketPort: Integer
) of Object;

property OnPacketTrace: TPacketTraceEvent read FOnPacketTrace write FOnPacketTrace;

Remarks

The PacketTrace event shows all the packets sent or received by the component.

Packet contains the full contents of the datagram.

Direction shows the direction of the packet: 1 for incoming packets, and 2 for outgoing packets.

In the case of an incoming packet, PacketAddress and PacketPort identify the source of the packet.

In the case of an outgoing packet, PacketAddress and PacketPort identify the destination of the packet.

ReadyToSend Event (SNMPTCPAgent Component)

Fired when the component is ready to send data.

Syntax

type TReadyToSendEvent = procedure (
  Sender: TObject
) of Object;

property OnReadyToSend: TReadyToSendEvent read FOnReadyToSend write FOnReadyToSend;

Remarks

The ReadyToSend event indicates that the underlying TCP/IP subsystem is ready to accept data after a failed DataToSend.

Report Event (SNMPTCPAgent Component)

Fired when a Report packet is received.

Syntax

type TReportEvent = procedure (
  Sender: TObject;
  RequestId: Integer;
  SNMPVersion: Integer;
  const Community: String;
  const User: String;
  SecurityLevel: Integer;
  const SourceAddress: String;
  SourcePort: Integer;
  ErrorIndex: Integer;
  ErrorStatus: Integer;
  const ErrorDescription: String
) of Object;

property OnReport: TReportEvent read FOnReport write FOnReport;

Remarks

For SNMPv3, the User parameter shows the user that was supplied with the packet. This parameter MUST be used together with the SecurityLevel parameter which shows the level of security in the message.

The SecurityLevel parameter shows whether the request has been authenticated. If SecurityLevel is 0, the request has NOT been authenticated (i.e. the packet signature has not been verified). For an authenticated, non encrypted request, SecurityLevel is 1. For an authenticated and encrypted request, SecurityLevel is 2.

The list of variables in the SNMP packet, including optional values and types, is provided through the Objects collection. Each object is of type SNMPObject. This type describes the Oid, ObjectType, and Value of each SNMP object. These variables must be copied to another location before the event has completed executing, or they may be overridden by other events.

The SourceAddress and SourcePort parameters show the address and port of the sender as reported by the TCP/IP stack.

SetRequest Event (SNMPTCPAgent Component)

Fired when a SetRequest packet is received.

Syntax

type TSetRequestEvent = procedure (
  Sender: TObject;
  RequestId: Integer;
  MessageId: Integer;
  SNMPVersion: Integer;
  const Community: String;
  const User: String;
  SecurityLevel: Integer;
  const SourceAddress: String;
  SourcePort: Integer;
  var ErrorIndex: Integer;
  var ErrorStatus: Integer;
  const ErrorDescription: String;
  var Respond: Boolean
) of Object;

property OnSetRequest: TSetRequestEvent read FOnSetRequest write FOnSetRequest;

Remarks

The list of variables in the SNMP packet, including optional values and types, is provided through the Objects collection. Each object is of type SNMPObject. This type describes the Oid, ObjectType, and Value of each SNMP object. These variables must be copied to another location before the event has completed executing, or they may be overridden by other events.

The SourceAddress and SourcePort parameters show the address and port of the sender as reported by the TCP/IP stack.

The MessageId parameter identifies the received request.

For SNMPv3, the User parameter shows the user that was supplied with the packet. This parameter MUST be used together with the SecurityLevel parameter which shows the level of security in the message.

The SecurityLevel parameter shows whether the request has been authenticated. If SecurityLevel is 0, the request has NOT been authenticated (i.e. the packet signature has not been verified). For an authenticated, non encrypted request, SecurityLevel is 1. For an authenticated and encrypted request, SecurityLevel is 2.

To send a response, the Respond parameter must be set to true. By default, this value is false, which means no response will be sent. The ErrorStatus parameter may also be set to a valid SNMP status code (the default value is 0, which represents no error).

The following is a list of valid SNMP status code values:

0 (noError) No error.
1 (tooBig) The response cannot fit in a single SNMP message.
2 (noSuchName) Variable does not exist.
3 (badValue) Invalid value or syntax.
4 (readOnly) Variable is read-only.
5 (genError) Other error (SNMPv1).
6 (noAccess) Access denied.
7 (wrongType) Wrong object type.
8 (wrongLength) Wrong length.
9 (wrongEncoding) Wrong encoding.
10 (wrongValue) Wrong value.
11 (noCreation) No creation.
12 (inconsistentValue) Inconsistent value.
13 (resourceUnavailable) Resource unavailable.
14 (commitFailed) Commit failed.
15 (undoFailed) Undo failed.
16 (authorizationError) Authorization error.
17 (notWritable) Variable is not writable.
18 (inconsistentName) Inconsistent name.

The ErrorIndex parameter indicates the index of the first variable (object) that caused an error. The default value is 0.

Variable indexes start with 0. ErrorIndex has no meaning when ErrorStatus is 0 (no error).

SSLClientAuthentication Event (SNMPTCPAgent Component)

Fired when the client presents its credentials to the server.

Syntax

type TSSLClientAuthenticationEvent = procedure (
  Sender: TObject;
  const RemoteAddress: String;
  RemotePort: Integer;
  CertEncoded: String;
  CertEncodedB: TBytes;
  const CertSubject: String;
  const CertIssuer: String;
  const Status: String;
  var Accept: Boolean
) of Object;

property OnSSLClientAuthentication: TSSLClientAuthenticationEvent read FOnSSLClientAuthentication write FOnSSLClientAuthentication;

Remarks

This event fires when a client connects to the component and presents a certificate for authentication. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether to continue or not.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string "OK").

RemoteAddress is the IP address of the connecting client.

RemotePort is the source port of the connecting client.

CertEncoded is the base64 encoded certificate presented by the client.

CertSubject is the subject of the certificate presented by the client.

CertIssuer is the subject of the issuer of the certificate presented by the client.

Status is the stauts of the certificate.

Accept defines whether the certificate is accepted.

SSLServerAuthentication Event (SNMPTCPAgent Component)

Fires when connecting to the server.

Syntax

type TSSLServerAuthenticationEvent = procedure (
  Sender: TObject;
  const RemoteAddress: String;
  RemotePort: Integer;
  CertEncoded: String;
  CertEncodedB: TBytes;
  const CertSubject: String;
  const CertIssuer: String;
  const Status: String;
  var Accept: Boolean
) of Object;

property OnSSLServerAuthentication: TSSLServerAuthenticationEvent read FOnSSLServerAuthentication write FOnSSLServerAuthentication;

Remarks

This event is where the client can decide whether to continue with the connection process or not. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether to continue or not.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string "OK"). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

RemoteAddress is the IP address of the server.

RemotePort is the source port of the server.

CertEncoded is the base64 encoded certificate presented by the server.

CertSubject is the subject of the certificate presented by the server.

CertIssuer is the subject of the issuer of the certificate presented by the server.

Status is the stauts of the certificate.

Accept defines whether the certificate is accepted.

SSLStatus Event (SNMPTCPAgent Component)

Shows the progress of the secure connection.

Syntax

type TSSLStatusEvent = procedure (
  Sender: TObject;
  const RemoteAddress: String;
  RemotePort: Integer;
  const Message: String
) of Object;

property OnSSLStatus: TSSLStatusEvent read FOnSSLStatus write FOnSSLStatus;

Remarks

The event is fired for informational and logging purposes only. It is used to track the progress of the connection.

RemoteAddress is the IP address of the remote machine.

RemotePort is the port of the remote machine.

Message is the log message.

SNMPObject Type

The current SNMP object.

Remarks

This type defines an SNMP object. Each object has an Oid, ObjectType, and Value. These values are populated by the component when incoming packets are received. You may use these fields to define objects to be used in outgoing packets.

Fields

ObjectType
TipnSNMPObjectTypes

The current object's type. The default type is NULL (5).

The corresponding object id and value are specified by the Oid and Value properties.

Possible object type values include:

otInteger (2) 2
otOctetString (4) 4
otNull (5) 5
otObjectID (6) 6
otIPAddress (64)64
otCounter32 (65)65
otGauge32 (66)66
otTimeTicks (67)67
otOpaque (68)68
otNSAP (69)69
otCounter64 (70)70
otUnsignedInteger32 (71)71

The component also supports the following artificial object values used to designate error conditions:

otNoSuchObject (128)No such object error.
otNoSuchInstance (129)No such instance error.
otEndOfMibView (130)End of MIB View error.

Oid
String

The current object's id which is encoded as a string of numbers separated by periods. For instance: "1.3.6.1.2.1.1.1.0" (OID for "system description").

The corresponding object type and value (if any) are specified by the ObjectType and Value properties.

Example

SNMPControl.ObjCount = 1 SNMPControl.ObjId(0) = "1.3.6.1.2.1.1.1.0"

TypeString
String

A string representation of the current object's ObjectType.

The corresponding object id and value are specified by the Oid and Value properties.

Value
String

The current object's value. The corresponding object id and type are specified by the Oid and ObjectType properties.

Example

SNMPControl.ObjCount = 1 SNMPControl.ObjId(0) = "1.3.6.1.2.1.1.1.0" SNMPControl.ObjValue(0) = "New Value"

ValueB
TBytes

The current object's value. The corresponding object id and type are specified by the Oid and ObjectType properties.

Example

SNMPControl.ObjCount = 1 SNMPControl.ObjId(0) = "1.3.6.1.2.1.1.1.0" SNMPControl.ObjValue(0) = "New Value"

Constructors

constructor Create();
constructor Create(valOid: String);
constructor Create(valOid: String; valValue: TBytes);

Config Settings (SNMPTCPAgent Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

SNMPTCPAgent Config Settings

AuthenticationKey:   The key to use for authentication.

This setting takes the hex-encoded key for authentication and may be set before calling SendSecureTrap.

CompatibilityMode:   Whether to operate the component in a specific compatibility mode.

This setting will cause the component to operate in a manner different than normal so that it is compatible with third-party products and libraries. The following table lists the possible values for this setting:

0 (default)Component operates normally for greatest compatibility.
1Component uses SNMP4j-compatible encryption (AES192 and AES256).

ContextEngineId:   Sets the context engine id of the SNMP entity.

If set, the context engine id included in the PDU will be set.

ContextName:   Sets the context name of the SNMP entity.

If set, the context name included in the PDU will be set.

DecryptLogPackets:   Whether to decrypt logged packets.

When set to True this setting will cause the component to decrypt packets logged in PacketTrace. This only applies when using SNMP Version 3. The default is False.

EncryptionKey:   The key to use for encryption.

This setting takes the hex-encoded key for encryption and may be set before calling SendSecureTrap.

ForceLocalPort:   Forces the component to bind to a specific port.

The default value is True, which makes the component throw an error if LocalPort is busy. When ForceLocalPort is set to False and the port is busy, the component silently chooses another random port.

MsgMaxSize:   The maximum supported message size.

This setting specifies the maximum supported message size in bytes. This is only applicable when SNMPVersion is set to 3. This corresponds to the "msgMaxSize" field in the request.

RespondFromDestIP:   Whether to respond from the IP address that the request was sent to.

By default the component will always respond from the interface defined by LocalHost. In the case where aliases have been defined on the system, incoming traffic may have a different value for the destination. This setting tells the component to respond using a source address that matches the destination address of the received packet. This setting should only be set to True if there is a specific reason to do so.

SourceAddress:   The source address of the received packet.

This setting holds the source address of the received packet. This may be queried at any time, including from within an event, and returns the source address of the received packet. This value is read-only.

SourcePort:   The source port of the received packet.

This setting holds the source port of the received packet. This may be queried at any time, including from within an event, and returns the source port of the received packet. This value is read-only.

TimeWindow:   The time window used for SNMPv3 timeliness checking (authentication).

The default value is 150 (seconds).

TrapAgentAddress:   The address of the object generating the trap.

This setting is used to specify the agent-addr field when sending V1 Traps. The default value is the address of the localhost. This value must be an IPv4 address.

TrapCommunity:   The value of the Community parameter for SNMP traps.

Typical values are "public" or "private". The default value is "public".

TrapEnterprise:   The type of the object generating the trap.

This setting specifies the type of object generating the SNMP Trap. The default value is "1.3.6.1.6.3.1.1.5" (i.e. SNMPv2-MIB::snmpTraps).

TrapPort:   The port where SNMP traps are sent.

The TrapPort is the TCP port where SNMP traps are sent.

A valid port number (a value between 1 and 65535) is required. The default value is 162.

TCPClient Config Settings

CloseStreamAfterTransfer:   If true, the component will close the upload or download stream after the transfer.

This setting determines whether the input or output stream is closed after the transfer completes. When set to True (default), all streams will be closed after a transfer is completed. In order to keep streams open after the transfer of data, set this to False. the default value is True.

ConnectionTimeout:   Sets a separate timeout value for establishing a connection.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the component will use Timeout for establishing a connection and transmitting/receiving data.

FirewallAutoDetect:   Tells the component whether or not to automatically detect and use firewall system settings, if available.

This configuration setting is provided for use by components that do not directly expose Firewall properties.

FirewallHost:   Name or IP address of firewall (optional).

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

FirewallPassword:   Password to be used if authentication is to be used when connecting through the firewall.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

FirewallPort:   The TCP port for the FirewallHost;.

The FirewallPort is set automatically when FirewallType is set to a valid value.

Note: This configuration setting is provided for use by components that do not directly expose Firewall properties.

FirewallType:   Determines the type of firewall to connect through.

The appropriate values are as follows:

0No firewall (default setting).
1Connect through a tunneling proxy. FirewallPort is set to 80.
2Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
3Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
10Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

FirewallUser:   A user name if authentication is to be used connecting through a firewall.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the component raises an exception.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

KeepAliveInterval:   The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

When set, TCPKeepAlive will automatically be set to True. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in macOS.

KeepAliveTime:   The inactivity time in milliseconds before a TCP keep-alive packet is sent.

When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Linger:   When set to True, connections are terminated gracefully.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.

In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the component returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.

LingerTime:   Time in seconds to have the connection linger.

LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout.

LocalHost:   The name of the local host through which connections are initiated or accepted.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the component initiate connections (or accept in the case of server components) only through that interface.

If the component is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

LocalPort:   The port in the local host where the component binds.

This must be set before a connection is attempted. It instructs the component to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength:   The maximum amount of data to accumulate when no EOL is found.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.

MaxTransferRate:   The transfer rate limit in bytes per second.

This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit.

ProxyExceptionsList:   A semicolon separated list of hosts and IPs to bypass when using a proxy.

This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use. When requests are made to hosts specified in this property, the proxy will not be used. For instance:

www.google.com;www.nsoftware.com

TCPKeepAlive:   Determines whether or not the keep alive socket option is enabled.

If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

TcpNoDelay:   Whether or not to delay when sending packets.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

UseIPv6:   Whether to use IPv6.

When set to 0 (default), the component will use IPv4 exclusively. When set to 1, the component will use IPv6 exclusively. To instruct the component to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are:

0 IPv4 Only
1 IPv6 Only
2 IPv6 with IPv4 fallback

SSL Config Settings

LogSSLPackets:   Controls whether SSL packets are logged when using the internal security API.

When SSLProvider is set to Internal, this setting controls whether SSL packets should be logged. By default, this setting is False, as it is only useful for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this setting has no effect if SSLProvider is set to Platform.

OpenSSLCADir:   The path to a directory containing CA certificates.

This functionality is available only when the provider is OpenSSL.

The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g. 9d66eef0.0, 9d66eef0.1 etc). OpenSSL recommends to use the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCAFile:   Name of the file containing the list of CA's trusted by your application.

This functionality is available only when the provider is OpenSSL.

The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by

-----BEGIN CERTIFICATE-----

... (CA certificate in base64 encoding) ...

-----END CERTIFICATE-----

sequences. Before, between, and after the certificates text is allowed which can be used e.g. for descriptions of the certificates. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCipherList:   A string that controls the ciphers to be used by SSL.

This functionality is available only when the provider is OpenSSL.

The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".

OpenSSLPrngSeedData:   The data to seed the pseudo random number generator (PRNG).

This functionality is available only when the provider is OpenSSL.

By default OpenSSL uses the device file "/dev/urandom" to seed the PRNG and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.

ReuseSSLSession:   Determines if the SSL session is reused.

If set to true, the component will reuse the context if and only if the following criteria are met:

  • The target host name is the same.
  • The system cache entry has not expired (default timeout is 10 hours).
  • The application process that calls the function is the same.
  • The logon session is the same.
  • The instance of the component is the same.

SSLCACerts:   A newline separated list of CA certificate to use during SSL client authentication.

This setting specifies one or more CA certificates to be included in the request when performing SSL client authentication. Some servers require the entire chain, including CA certificates, to be presented when performing SSL client authentication. The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLCheckCRL:   Whether to check the Certificate Revocation List for the server certificate.

This setting specifies whether the component will check the Certificate Revocation List specified by the server certificate. If set to 1 or 2, the component will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The component will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the component raises an exception.

When set to 0 (default) the CRL check will not be performed by the component. When set to 1, it will attempt to perform the CRL check, but will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

SSLCipherStrength:   The minimum cipher strength used for bulk encryption.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting.

SSLEnabledCipherSuites:   The cipher suite to be used in an SSL negotiation.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the component will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when SSLProvider is set to Platform: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=CALG_AES_256"); obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES"); Possible values when SSLProvider is set to Platform include:

  • CALG_3DES
  • CALG_3DES_112
  • CALG_AES
  • CALG_AES_128
  • CALG_AES_192
  • CALG_AES_256
  • CALG_AGREEDKEY_ANY
  • CALG_CYLINK_MEK
  • CALG_DES
  • CALG_DESX
  • CALG_DH_EPHEM
  • CALG_DH_SF
  • CALG_DSS_SIGN
  • CALG_ECDH
  • CALG_ECDH_EPHEM
  • CALG_ECDSA
  • CALG_ECMQV
  • CALG_HASH_REPLACE_OWF
  • CALG_HUGHES_MD5
  • CALG_HMAC
  • CALG_KEA_KEYX
  • CALG_MAC
  • CALG_MD2
  • CALG_MD4
  • CALG_MD5
  • CALG_NO_SIGN
  • CALG_OID_INFO_CNG_ONLY
  • CALG_OID_INFO_PARAMETERS
  • CALG_PCT1_MASTER
  • CALG_RC2
  • CALG_RC4
  • CALG_RC5
  • CALG_RSA_KEYX
  • CALG_RSA_SIGN
  • CALG_SCHANNEL_ENC_KEY
  • CALG_SCHANNEL_MAC_KEY
  • CALG_SCHANNEL_MASTER_HASH
  • CALG_SEAL
  • CALG_SHA
  • CALG_SHA1
  • CALG_SHA_256
  • CALG_SHA_384
  • CALG_SHA_512
  • CALG_SKIPJACK
  • CALG_SSL2_MASTER
  • CALG_SSL3_MASTER
  • CALG_SSL3_SHAMD5
  • CALG_TEK
  • CALG_TLS1_MASTER
  • CALG_TLS1PRF
Example values when SSLProvider is set to Internal: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA"); obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_DH_ANON_WITH_AES_128_CBC_SHA"); Possible values when SSLProvider is set to Internal include:
  • TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
  • TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
  • TLS_DH_RSA_WITH_AES_128_GCM_SHA256 (Not Recommended)
  • TLS_DH_RSA_WITH_AES_256_GCM_SHA384 (Not Recommended)
  • TLS_DH_DSS_WITH_AES_128_GCM_SHA256 (Not Recommended)
  • TLS_DH_DSS_WITH_AES_256_GCM_SHA384 (Not Recommended)
  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
  • TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_DES_CBC_SHA
  • TLS_DHE_RSA_WITH_DES_CBC_SHA
  • TLS_DHE_DSS_WITH_DES_CBC_SHA
  • TLS_RSA_WITH_RC4_128_MD5
  • TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols) only the following cipher suites are supported:

  • TLS_AES_256_GCM_SHA384
  • TLS_CHACHA20_POLY1305_SHA256
  • TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols:   Used to enable/disable the supported security protocols.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:

TLS1.312288 (Hex 3000)
TLS1.23072 (Hex C00) (Default)
TLS1.1768 (Hex 300) (Default)
TLS1 192 (Hex C0) (Default)
SSL3 48 (Hex 30)
SSL2 12 (Hex 0C)

SSLEnabledProtocols - TLS 1.3 Notes

By default when TLS 1.3 is enabled the component will use the internal TLS implementation.

In editions which are designed to run on Windows SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is only supported on Windows 11 / Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.

If set to 1 (Platform provider) please be aware of the following notes:

  • The platform provider is only available on Windows 11 / Windows Server 2022 and up.
  • SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
  • If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2 the above restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.

SSLEnableRenegotiation:   Whether the renegotiation_info SSL extension is supported.

This setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This setting is True by default, but can be set to False to disable the extension.

This setting is only applicable when SSLProvider is set to Internal.

SSLIncludeCertChain:   Whether the entire certificate chain is included in the SSLServerAuthentication event.

This setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

SSLKeyLogFile:   The location of a file where per-session secrets are written for debugging purposes.

This setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the component will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffice for debugging purposes. When writing to this file the component will only append, it will not overwrite previous values.

Note: This setting is only applicable when SSLProvider is set to Internal.

SSLNegotiatedCipher:   Returns the negotiated ciphersuite.

Returns the ciphersuite negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

SSLNegotiatedCipherStrength:   Returns the negotiated ciphersuite strength.

Returns the strength of the ciphersuite negotiated during the SSL handshake.

Note: For server components (e.g.TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

SSLNegotiatedCipherSuite:   Returns the negotiated ciphersuite.

Returns the ciphersuite negotiated during the SSL handshake represented as a single string.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherSuite[connId]");

SSLNegotiatedKeyExchange:   Returns the negotiated key exchange algorithm.

Returns the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchange[connId]");

SSLNegotiatedKeyExchangeStrength:   Returns the negotiated key exchange algorithm strength.

Returns the strenghth of the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchangeStrength[connId]");

SSLNegotiatedVersion:   Returns the negotiated protocol version.

Returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

SSLSecurityFlags:   Flags that control certificate verification.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:

0x00000001Ignore time validity status of certificate.
0x00000002Ignore time validity status of CTL.
0x00000004Ignore non-nested certificate times.
0x00000010Allow unknown Certificate Authority.
0x00000020Ignore wrong certificate usage.
0x00000100Ignore unknown certificate revocation status.
0x00000200Ignore unknown CTL signer revocation status.
0x00000400Ignore unknown Certificate Authority revocation status.
0x00000800Ignore unknown Root revocation status.
0x00008000Allow test Root certificate.
0x00004000Trust test Root certificate.
0x80000000Ignore non-matching CN (certificate CN not-matching server name).

This functionality is currently not available when the provider is OpenSSL.

SSLServerCACerts:   A newline separated list of CA certificate to use during SSL server certificate validation.

This setting optionally specifies one or more CA certificates to be used when verifying the server certificate. When verifying the server's certificate the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This setting should only be set if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

TLS12SignatureAlgorithms:   Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.

This setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the component will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the component raises an exception.

The format of this value is a comma separated list of hash-signature combinations. For instance: TCPClient.SSLProvider = TCPClientSSLProviders.sslpInternal; TCPClient.Config("SSLEnabledProtocols=3072"); //TLS 1.2 TCPClient.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups:   The supported groups for ECC.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)

TLS13KeyShareGroups:   The groups for which to pregenerate key shares.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448"
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1"
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096"
  • "ffdhe_6144"
  • "ffdhe_8192"

TLS13SignatureAlgorithms:   The allowed certificate signature algorithms.

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

  • "ed25519" (default)
  • "ed448" (default)
  • "ecdsa_secp256r1_sha256" (default)
  • "ecdsa_secp384r1_sha384" (default)
  • "ecdsa_secp521r1_sha512" (default)
  • "rsa_pkcs1_sha256" (default)
  • "rsa_pkcs1_sha384" (default)
  • "rsa_pkcs1_sha512" (default)
  • "rsa_pss_sha256" (default)
  • "rsa_pss_sha384" (default)
  • "rsa_pss_sha512" (default)
The default value is rsa_pss_sha256,rsa_pss_sha384,rsa_pss_sha512,rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512,ecdsa_secp256r1_sha256,ecdsa_secp384r1_sha384,ecdsa_secp521r1_sha512,ed25519,ed448. This setting is only applicable when SSLEnabledProtocols includes TLS 1.3.
TLS13SupportedGroups:   The supported groups for (EC)DHE key exchange.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448" (default)
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096" (default)
  • "ffdhe_6144" (default)
  • "ffdhe_8192" (default)

Socket Config Settings

AbsoluteTimeout:   Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for UDP ports.

FirewallData:   Used to send extra data to the firewall.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes).

InBufferSize:   The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize:   The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

Base Config Settings

BuildInfo:   Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

CodePage:   The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:

IdentifierName
037IBM EBCDIC - U.S./Canada
437OEM - United States
500IBM EBCDIC - International
708Arabic - ASMO 708
709Arabic - ASMO 449+, BCON V4
710Arabic - Transparent Arabic
720Arabic - Transparent ASMO
737OEM - Greek (formerly 437G)
775OEM - Baltic
850OEM - Multilingual Latin I
852OEM - Latin II
855OEM - Cyrillic (primarily Russian)
857OEM - Turkish
858OEM - Multilingual Latin I + Euro symbol
860OEM - Portuguese
861OEM - Icelandic
862OEM - Hebrew
863OEM - Canadian-French
864OEM - Arabic
865OEM - Nordic
866OEM - Russian
869OEM - Modern Greek
870IBM EBCDIC - Multilingual/ROECE (Latin-2)
874ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875IBM EBCDIC - Modern Greek
932ANSI/OEM - Japanese, Shift-JIS
936ANSI/OEM - Simplified Chinese (PRC, Singapore)
949ANSI/OEM - Korean (Unified Hangul Code)
950ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026IBM EBCDIC - Turkish (Latin-5)
1047IBM EBCDIC - Latin 1/Open System
1140IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141IBM EBCDIC - Germany (20273 + Euro symbol)
1142IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144IBM EBCDIC - Italy (20280 + Euro symbol)
1145IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147IBM EBCDIC - France (20297 + Euro symbol)
1148IBM EBCDIC - International (500 + Euro symbol)
1149IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201Unicode UCS-2 Big-Endian
1250ANSI - Central European
1251ANSI - Cyrillic
1252ANSI - Latin I
1253ANSI - Greek
1254ANSI - Turkish
1255ANSI - Hebrew
1256ANSI - Arabic
1257ANSI - Baltic
1258ANSI/OEM - Vietnamese
1361Korean (Johab)
10000MAC - Roman
10001MAC - Japanese
10002MAC - Traditional Chinese (Big5)
10003MAC - Korean
10004MAC - Arabic
10005MAC - Hebrew
10006MAC - Greek I
10007MAC - Cyrillic
10008MAC - Simplified Chinese (GB 2312)
10010MAC - Romania
10017MAC - Ukraine
10021MAC - Thai
10029MAC - Latin II
10079MAC - Icelandic
10081MAC - Turkish
10082MAC - Croatia
12000Unicode UCS-4 Little-Endian
12001Unicode UCS-4 Big-Endian
20000CNS - Taiwan
20001TCA - Taiwan
20002Eten - Taiwan
20003IBM5550 - Taiwan
20004TeleText - Taiwan
20005Wang - Taiwan
20105IA5 IRV International Alphabet No. 5 (7-bit)
20106IA5 German (7-bit)
20107IA5 Swedish (7-bit)
20108IA5 Norwegian (7-bit)
20127US-ASCII (7-bit)
20261T.61
20269ISO 6937 Non-Spacing Accent
20273IBM EBCDIC - Germany
20277IBM EBCDIC - Denmark/Norway
20278IBM EBCDIC - Finland/Sweden
20280IBM EBCDIC - Italy
20284IBM EBCDIC - Latin America/Spain
20285IBM EBCDIC - United Kingdom
20290IBM EBCDIC - Japanese Katakana Extended
20297IBM EBCDIC - France
20420IBM EBCDIC - Arabic
20423IBM EBCDIC - Greek
20424IBM EBCDIC - Hebrew
20833IBM EBCDIC - Korean Extended
20838IBM EBCDIC - Thai
20866Russian - KOI8-R
20871IBM EBCDIC - Icelandic
20880IBM EBCDIC - Cyrillic (Russian)
20905IBM EBCDIC - Turkish
20924IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932JIS X 0208-1990 & 0121-1990
20936Simplified Chinese (GB2312)
21025IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027Extended Alpha Lowercase
21866Ukrainian (KOI8-U)
28591ISO 8859-1 Latin I
28592ISO 8859-2 Central Europe
28593ISO 8859-3 Latin 3
28594ISO 8859-4 Baltic
28595ISO 8859-5 Cyrillic
28596ISO 8859-6 Arabic
28597ISO 8859-7 Greek
28598ISO 8859-8 Hebrew
28599ISO 8859-9 Latin 5
28605ISO 8859-15 Latin 9
29001Europa 3
38598ISO 8859-8 Hebrew
50220ISO 2022 Japanese with no halfwidth Katakana
50221ISO 2022 Japanese with halfwidth Katakana
50222ISO 2022 Japanese JIS X 0201-1989
50225ISO 2022 Korean
50227ISO 2022 Simplified Chinese
50229ISO 2022 Traditional Chinese
50930Japanese (Katakana) Extended
50931US/Canada and Japanese
50933Korean Extended and Korean
50935Simplified Chinese Extended and Simplified Chinese
50936Simplified Chinese
50937US/Canada and Traditional Chinese
50939Japanese (Latin) Extended and Japanese
51932EUC - Japanese
51936EUC - Simplified Chinese
51949EUC - Korean
51950EUC - Traditional Chinese
52936HZ-GB2312 Simplified Chinese
54936Windows XP: GB18030 Simplified Chinese (4 Byte)
57002ISCII Devanagari
57003ISCII Bengali
57004ISCII Tamil
57005ISCII Telugu
57006ISCII Assamese
57007ISCII Oriya
57008ISCII Kannada
57009ISCII Malayalam
57010ISCII Gujarati
57011ISCII Punjabi
65000Unicode UTF-7
65001Unicode UTF-8

The following is a list of valid code page identifiers for Mac OS only:

IdentifierName
1ASCII
2NEXTSTEP
3JapaneseEUC
4UTF8
5ISOLatin1
6Symbol
7NonLossyASCII
8ShiftJIS
9ISOLatin2
10Unicode
11WindowsCP1251
12WindowsCP1252
13WindowsCP1253
14WindowsCP1254
15WindowsCP1250
21ISO2022JP
30MacOSRoman
10UTF16String
0x90000100UTF16BigEndian
0x94000100UTF16LittleEndian
0x8c000100UTF32String
0x98000100UTF32BigEndian
0x9c000100UTF32LittleEndian
65536Proprietary

LicenseInfo:   Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

  • Product: The product the license is for.
  • Product Key: The key the license was generated from.
  • License Source: Where the license was found (e.g., RuntimeLicense, License File).
  • License Type: The type of license installed (e.g., Royalty Free, Single Server).
  • Last Valid Build: The last valid build number for which the license will work.
UseInternalSecurityAPI:   Tells the component whether or not to use the system security libraries or an internal implementation.

By default the component will use the system security libraries to perform cryptographic functions where applicable. Setting this to True tells the component to use the internal implementation instead of using the system's security API.

Trappable Errors (SNMPTCPAgent Component)

SNMPTCPAgent Errors

201   Timeout.
301   Bad Object Index.
302   Value exceeds maximum number of objects allowed.
303   The value must be an IP address in dotted format.
305   Unsupported SNMP version.
306   Unknown PDU type.
307   The component is busy performing the current action.
308   Verification failed.
309   Missing password for Verification.
310   Missing signature.
311   Missing remote time.
312   Missing timeout value.
313   Decryption Failed.
314   Missing password for decryption.
315   Not encrypted.
316   Security model not supported.
317   Defective packet
318   Not from bound point.
319   Operation not permitted in current role.
320   Bad packet.
321   Message not authenticated.
322   No such oid.
323   Missing privacy parameter.
324   Bad engine id.
325   Bad time frame.
326   Bad user name.
327   Security level was not accepted.
328   Discovery failed.
329   Incorrect key length.
330   No authentication password supplied.

The component may also return one of the following error codes, which are inherited from other components.

TCPClient Errors

100   You cannot change the RemotePort at this time. A connection is in progress.
101   You cannot change the RemoteHost (Server) at this time. A connection is in progress.
102   The RemoteHost address is invalid (0.0.0.0).
104   Already connected. If you want to reconnect, close the current connection first.
106   You cannot change the LocalPort at this time. A connection is in progress.
107   You cannot change the LocalHost at this time. A connection is in progress.
112   You cannot change MaxLineLength at this time. A connection is in progress.
116   RemotePort cannot be zero. Please specify a valid service port number.
117   You cannot change the UseConnection option while the component is active.
135   Operation would block.
201   Timeout.
211   Action impossible in control's present state.
212   Action impossible while not connected.
213   Action impossible while listening.
301   Timeout.
302   Could not open file.
434   Unable to convert string to selected CodePage.
1105   Already connecting. If you want to reconnect, close the current connection first.
1117   You need to connect first.
1119   You cannot change the LocalHost at this time. A connection is in progress.
1120   Connection dropped by remote host.

SSL Errors

270   Cannot load specified security library.
271   Cannot open certificate store.
272   Cannot find specified certificate.
273   Cannot acquire security credentials.
274   Cannot find certificate chain.
275   Cannot verify certificate chain.
276   Error during handshake.
280   Error verifying certificate.
281   Could not find client certificate.
282   Could not find server certificate.
283   Error encrypting data.
284   Error decrypting data.

TCP/IP Errors

10004   [10004] Interrupted system call.
10009   [10009] Bad file number.
10013   [10013] Access denied.
10014   [10014] Bad address.
10022   [10022] Invalid argument.
10024   [10024] Too many open files.
10035   [10035] Operation would block.
10036   [10036] Operation now in progress.
10037   [10037] Operation already in progress.
10038   [10038] Socket operation on non-socket.
10039   [10039] Destination address required.
10040   [10040] Message too long.
10041   [10041] Protocol wrong type for socket.
10042   [10042] Bad protocol option.
10043   [10043] Protocol not supported.
10044   [10044] Socket type not supported.
10045   [10045] Operation not supported on socket.
10046   [10046] Protocol family not supported.
10047   [10047] Address family not supported by protocol family.
10048   [10048] Address already in use.
10049   [10049] Can't assign requested address.
10050   [10050] Network is down.
10051   [10051] Network is unreachable.
10052   [10052] Net dropped connection or reset.
10053   [10053] Software caused connection abort.
10054   [10054] Connection reset by peer.
10055   [10055] No buffer space available.
10056   [10056] Socket is already connected.
10057   [10057] Socket is not connected.
10058   [10058] Can't send after socket shutdown.
10059   [10059] Too many references, can't splice.
10060   [10060] Connection timed out.
10061   [10061] Connection refused.
10062   [10062] Too many levels of symbolic links.
10063   [10063] File name too long.
10064   [10064] Host is down.
10065   [10065] No route to host.
10066   [10066] Directory not empty
10067   [10067] Too many processes.
10068   [10068] Too many users.
10069   [10069] Disc Quota Exceeded.
10070   [10070] Stale NFS file handle.
10071   [10071] Too many levels of remote in path.
10091   [10091] Network subsystem is unavailable.
10092   [10092] WINSOCK DLL Version out of range.
10093   [10093] Winsock not loaded yet.
11001   [11001] Host not found.
11002   [11002] Non-authoritative 'Host not found' (try again or check DNS setup).
11003   [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP.
11004   [11004] Valid name, no data record (check DNS setup).

Copyright (c) 2022 /n software inc. - All rights reserved.
IPWorks SNMP 2022 Delphi Edition - Version 22.0 [Build 8369]