FileMailer Component

Properties   Methods   Events   Config Settings   Errors  

The FileMailer Component is used to send emails with file attachments.

Syntax

TipwFileMailer

Remarks

The FileMailer Component supports both plaintext and Secure Sockets Layer/Transport Layer Security (SSL/TLS) connections (RFC 2487). When connecting over SSL/TLS the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL related settings are also supported via the Config method.

The component sends a message (provided in MessageText) and one or more file attachments specified in the Attachments properties.

The recipients are specified by the SendTo, Cc, and BCc properties, and the message subject is specified by the Subject property.

After all of the appropriate properties have been set, call the Send method and your message will be sent to its intended recipients.

Other SMTP headers may be specified through the OtherHeaders property. Information about interaction with the server is provided through the PITrail event.

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

Attachments Property (FileMailer Component)

This property contains paths of the files to attach to the message.

Syntax

property Attachments: TipwFileAttachmentList read get_Attachments write set_Attachments;

Remarks

This property contains the path of a file on your system to be sent as an attachment with your message. The component will open the file and encode its contents in MIME format.

Example 1: Adding an Attachment

component.AddAttachment("C:\file1.zip"); component.AddAttachment("C:\file2.zip"); component.Send(); Example 3: Using an Attachments Array

component.AttachmentCount = 1; component.AttachmentName(0) = "name"; component.AttachmentFile(0) = "C:\file.txt";

This property is not available at design time.

AuthMechanism Property (FileMailer Component)

This property is used when connecting to the mail server.

Syntax

property AuthMechanism: TipwTAuthMechanisms read get_AuthMechanism write set_AuthMechanism;

TipwTAuthMechanisms = (
  amUserPassword,
  amCRAMMD5,
  amNTLM,
  amAPOP,
  amSASLPlain,
  amSASLDigestMD5,
  amKerberos,
  amXOAUTH2
);

Default Value

amUserPassword

Remarks

This is the authentication mechanism property to be used when connecting to the mail server.

By default, this property is amUserPassword (0), and if the User and Password properties are set, the AUTH command is sent to the server for authentication. If this property is set to amCRAMMD5 (1), CRAM-MD5 authentication is used instead.

If this property is set to amNTLM (2), NTLM authentication will be used.

If this property is set to amKerberos (6), Kerberos authentication will be used.

Note: This functionality is available only in Windows.

When set to amXOAUTH2 (7), set User to the username and AuthorizationIdentity to the OAuth token. See AuthorizationIdentity for details.

BCc Property (FileMailer Component)

This property includes a comma-separated list of addresses for blind carbon copies (optional).

Syntax

property BCc: String read get_BCc write set_BCc;

Default Value

''

Remarks

This property specifies a comma-separated list of destinations for blind carbon copies of the mail message. A copy of the message is sent to each destination. Because no BCc SMTP header is created containing the destination addresses, individual recipients never see the list of the other recipients.

The component will return an error if the MailServer returns an error code about any email address specified in SendTo or Cc but it will fire an Error event only if the same thing happens with an email address specified in this property.

If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.

Note: You must clear the MessageRecipients properties before setting this property to remove previous recipients.

Cc Property (FileMailer Component)

This property includes a comma-separated list of addresses for carbon copies (optional).

Syntax

property Cc: String read get_Cc write set_Cc;

Default Value

''

Remarks

This property specifies a comma-separated list of destinations for carbon copies of the mail message. A copy of the message is sent to each destination, and a Cc SMTP header is created containing the destination addresses. This header is sent to every recipient of the message. If you don't want to copy this information to every recipient, then use blind carbon copies instead (see the description of the BCc).

The component will return an error if the MailServer returns an error code about any email address specified in SendTo or Cc but it will fire an Error event only if the same thing happens with an email address specified in BCc.

If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.

Note: You must clear the MessageRecipients properties before setting this property to remove previous recipients.

Command Property (FileMailer Component)

This property is used to send additional commands directly to the server.

Syntax

property Command: String write set_Command;

Default Value

''

Remarks

This property can be used to send additional commands directly to the server. Check the LastReply property or trap the PITrail events coming from the server to get the response.

This property is write-only and not available at design time.

Connected Property (FileMailer Component)

This shows whether the component is connected.

Syntax

property Connected: Boolean read get_Connected write set_Connected;

Default Value

false

Remarks

This property is used to determine whether or not the component is connected to the remote host.

Note: It is recommended to use the Connect or Disconnect method instead of setting this property.

This property is not available at design time.

DeliveryNotificationTo Property (FileMailer Component)

This property includes the email address to which to send a delivery notification.

Syntax

property DeliveryNotificationTo: String read get_DeliveryNotificationTo write set_DeliveryNotificationTo;

Default Value

''

Remarks

This property contains the email address to send to which to send a delivery notification. When set, a Return-Receipt-To header is added to the message. This property should be set to an email address that can receive the delivery notification.

Firewall Property (FileMailer Component)

A set of properties related to firewall access.

Syntax

property Firewall: TipwFirewall read get_Firewall write set_Firewall;

Remarks

This is a Firewall-type property, which contains fields describing the firewall through which the component will attempt to connect.

From Property (FileMailer Component)

The email address of the sender (required).

Syntax

property From: String read get_From write set_From;

Default Value

''

Remarks

This property is used to create a From SMTP header. This header identifies the sender of the message. A valid email address is required. Examples of valid addresses are: "Friendly Name" <address@company.com> or address@company.com

If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.

Idle Property (FileMailer Component)

The current status of the component.

Syntax

property Idle: Boolean read get_Idle;

Default Value

true

Remarks

Idle will be False if the component is currently busy (communicating and/or waiting for an answer), and True at all other times.

This property is read-only.

Importance Property (FileMailer Component)

Importance of the mail message (optional).

Syntax

property Importance: TipwTImportances read get_Importance write set_Importance;

TipwTImportances = (
  miUnspecified,
  miHigh,
  miNormal,
  miLow
);

Default Value

miUnspecified

Remarks

This property indicates the importance of the mail message (optional). When set, an Importance header will be added to the message.

Importance is an indication to the recipient(s) about how important the message is. The possible values are Unspecified (0), High (1), Normal (2), and Low (3).

LastReply Property (FileMailer Component)

The last reply from the server.

Syntax

property LastReply: String read get_LastReply;

Default Value

''

Remarks

This property indicates the last reply received from the server. It can be used for informational purposes. The same information and more can also be retrieved through the PITrail event.

This property is read-only.

LocalHost Property (FileMailer Component)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

property LocalHost: String read get_LocalHost write set_LocalHost;

Default Value

''

Remarks

The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the component initiate connections (or accept in the case of server components) only through that interface.

If the component is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

MailPort Property (FileMailer Component)

The server port for SMTP (default 25).

Syntax

property MailPort: Integer read get_MailPort write set_MailPort;

Default Value

25

Remarks

This property contains the server port for SMTP (default 25). A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

For implicit SSL, use port 465 (please refer to the SSLStartMode property for more information).

This property is not available at design time.

MailServer Property (FileMailer Component)

The name or address of a mail server (mail relay).

Syntax

property MailServer: String read get_MailServer write set_MailServer;

Default Value

''

Remarks

This property specifies the IP address (IP number in dotted internet format) or Domain Name for a mail relay through which messages will be routed. It is set before a connection is attempted and cannot be changed once a connection is in progress.

The current version of the component does not provide a default value for the mail relay. You must provide a host name yourself. Generally, any internet host with an SMTP server will suffice (a UNIX host for example), but it is preferable to select a MailServer that is close to the machine sending mail.

If this property is set to a Domain Name, a DNS request is initiated and upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, an error is returned.

If the component is configured to use a SOCKS firewall, the value assigned to this property may be preceded with an "*". If this is the case, the host name is passed to the firewall unresolved and the firewall performs the DNS resolution.

MessageDate Property (FileMailer Component)

Date of the mail message (optional).

Syntax

property MessageDate: String read get_MessageDate write set_MessageDate;

Default Value

'*'

Remarks

If this property contains a non-empty string, then a Date SMTP header is created and attached to the message. If it is an empty string, then the date information is added by the mail relay(s) the message goes through.

Special case: if this property is set to the special value "*", a Date SMTP header reflecting the current date and time is generated when MessageHeaders is computed and the message is sent. This is the default behavior of the component

RFC 822 contains detailed date format specifications. An example of a valid date is 'Fri, 1 Mar 96 21:24:52 EST'.

This property is not available at design time.

MessageId Property (FileMailer Component)

The Message Identifier for the message.

Syntax

property MessageId: String read get_MessageId write set_MessageId;

Default Value

'*'

Remarks

This property contains the Message Identifier for the message. When set, the value of MessageId is used as the Message-ID header value of the message. A special value of "*" will automatically generate a random unique identifier for the message.

This property is not available at design time.

MessageRecipients Property (FileMailer Component)

The collection of recipients of the message.

Syntax

property MessageRecipients: TipwMessageRecipientList read get_MessageRecipients write set_MessageRecipients;

Remarks

This property contains a collection which describes to whom the message is being sent. You may include all recipients in this property, even Cc's and BCc's, which are specified by the type field.

MessageText Property (FileMailer Component)

This is the full text of the message to send (without headers).

Syntax

property MessageText: String read get_MessageText write set_MessageText;

Default Value

''

Remarks

This property contains the full text of the message.

The text contained in this property should be a collection of lines with lengths less than or equal to 80 bytes separated by CRLF ('#13#10') . The text in the message lines must contain 7-bit characters so that the message can successfully pass through the multitude of mail systems on the internet.

The component automatically escapes lines that start with a '.' by adding another as specified in RFC 821. The message text is unescaped by the receiving agent, so the process is fully transparent.

OtherHeaders Property (FileMailer Component)

An RFC 822 compliant string consisting of extra headers.

Syntax

property OtherHeaders: String read get_OtherHeaders write set_OtherHeaders;

Default Value

''

Remarks

This property contains a string of headers to be appended to the message headers created from other properties like SendTo, Subject, etc.

The headers must be of the format "header: value" as specified in RFC 822. Header lines should be separated by CRLF ('#13#10') .

Use this property with caution. If this property contains invalid headers, message delivery might not be successful.

This property is useful for extending the functionality of the component. A good example is delivery of MIME encoded messages.

SPECIAL CASE: if this property starts with an empty line (CRLF), then the value of this property is used instead of the normally computed message headers.

Example (Send an Email With Additional Header)

component.MailServer = "MyServer"; component.From = "me@server.com"; component.SendTo = "recipient@server.com"; component.Subject = "My Subject"; component.MessageText = "This is the message body."; component.OtherHeaders = "HeaderName: HeaderValue"; component.Send();

This property is not available at design time.

Password Property (FileMailer Component)

A password for logon to the MailServer .

Syntax

property Password: String read get_Password write set_Password;

Default Value

''

Remarks

If this property is set to a non-empty string, then when connecting to the MailServer an AUTH or CRAM-MD5 (depending on the value of AuthMechanism) command is sent in order to provide authentication information for the user.

This property is not available at design time.

Priority Property (FileMailer Component)

Priority of the mail message (optional).

Syntax

property Priority: TipwTPriorities read get_Priority write set_Priority;

TipwTPriorities = (
  epUnspecified,
  epNormal,
  epUrgent,
  epNonUrgent
);

Default Value

epUnspecified

Remarks

When this property is set, a Priority header will be added to the message. Priority is an indication about the delivery priority of the message. The possible values are epNormal, epUrgent, and epNonUrgent.

ReadReceiptTo Property (FileMailer Component)

Email address to send a read receipt to.

Syntax

property ReadReceiptTo: String read get_ReadReceiptTo write set_ReadReceiptTo;

Default Value

''

Remarks

When this property is set, a Disposition-Notification-To header is added to the message. This property should be set to an email address which should receive the read-receipt.

ReplyTo Property (FileMailer Component)

A mail address to which to reply (optional).

Syntax

property ReplyTo: String read get_ReplyTo write set_ReplyTo;

Default Value

''

Remarks

If this property contains a non-empty string, a Reply-To SMTP header is created for the message. This header shows the address to use for replies (useful if this address is different from the one in From).

If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.

SendTo Property (FileMailer Component)

A comma separated list of addresses for destinations (required).

Syntax

property SendTo: String read get_SendTo write set_SendTo;

Default Value

''

Remarks

This property specifies a comma separated list of destinations for the mail message. A copy of the message is sent to each of them, and a To SMTP header is created containing the destination addresses.

Examples of valid addresses are: "Friendly Name" <address@company.com> or address@company.com

The component will fail if the MailServer returns an error code about any email address specified in SendTo or Cc but it will silently ignore the error if the same happens with an email address specified in BCc.

If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.

NOTE: You must clear the MessageRecipients properties before setting this property to remove previous recipients.

Sensitivity Property (FileMailer Component)

Sensitivity of the mail message (optional).

Syntax

property Sensitivity: TipwTSensitivities read get_Sensitivity write set_Sensitivity;

TipwTSensitivities = (
  esUnspecified,
  esPersonal,
  esPrivate,
  esCompanyConfidential
);

Default Value

esUnspecified

Remarks

This property is an indication of how sensitive it is to disclose the message to people other than the recipients of the message. When set, a Sensitivity header will added to the message. Possible values are: esPersonal (1), esPrivate (2), and esCompanyConfidential (3).

SSLAcceptServerCertEncoded Property (FileMailer Component)

This is the certificate (PEM/Base64 encoded).

Syntax

property SSLAcceptServerCertEncoded: String read get_SSLAcceptServerCertEncoded write set_SSLAcceptServerCertEncoded;
property SSLAcceptServerCertEncodedB: TBytes read get_SSLAcceptServerCertEncodedB write set_SSLAcceptServerCertEncodedB;

Default Value

''

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The Store and Subject properties also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

This property is not available at design time.

SSLCertEncoded Property (FileMailer Component)

This is the certificate (PEM/Base64 encoded).

Syntax

property SSLCertEncoded: String read get_SSLCertEncoded write set_SSLCertEncoded;
property SSLCertEncodedB: TBytes read get_SSLCertEncodedB write set_SSLCertEncodedB;

Default Value

''

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The Store and Subject properties also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

This property is not available at design time.

SSLCertStore Property (FileMailer Component)

This is the name of the certificate store for the client certificate.

Syntax

property SSLCertStore: String read get_SSLCertStore write set_SSLCertStore;
property SSLCertStoreB: TBytes read get_SSLCertStoreB write set_SSLCertStoreB;

Default Value

'MY'

Remarks

This is the name of the certificate store for the client certificate.

The StoreType property denotes the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Store is used in conjunction with the Subject property to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

SSLCertStorePassword Property (FileMailer Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

property SSLCertStorePassword: String read get_SSLCertStorePassword write set_SSLCertStorePassword;

Default Value

''

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

SSLCertStoreType Property (FileMailer Component)

This is the type of certificate store for this certificate.

Syntax

property SSLCertStoreType: TipwCertStoreTypes read get_SSLCertStoreType write set_SSLCertStoreType;

TipwCertStoreTypes = (
  cstUser,
  cstMachine,
  cstPFXFile,
  cstPFXBlob,
  cstJKSFile,
  cstJKSBlob,
  cstPEMKeyFile,
  cstPEMKeyBlob,
  cstPublicKeyFile,
  cstPublicKeyBlob,
  cstSSHPublicKeyBlob,
  cstP7BFile,
  cstP7BBlob,
  cstSSHPublicKeyFile,
  cstPPKFile,
  cstPPKBlob,
  cstXMLFile,
  cstXMLBlob,
  cstJWKFile,
  cstJWKBlob,
  cstSecurityKey,
  cstBCFKSFile,
  cstBCFKSBlob,
  cstPKCS11,
  cstAuto
);

Default Value

cstUser

Remarks

This is the type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

SSLCertSubject Property (FileMailer Component)

This is the subject of the certificate used for client authentication.

Syntax

property SSLCertSubject: String read get_SSLCertSubject write set_SSLCertSubject;

Default Value

''

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

SSLEnabled Property (FileMailer Component)

Whether TLS/SSL is enabled.

Syntax

property SSLEnabled: Boolean read get_SSLEnabled write set_SSLEnabled;

Default Value

false

Remarks

This setting specifies whether TLS/SSL is enabled in the component. When False (default) the component operates in plaintext mode. When True TLS/SSL is enabled.

TLS/SSL may also be enabled by setting SSLStartMode. Setting SSLStartMode will automatically update this property value.

This property is not available at design time.

SSLProvider Property (FileMailer Component)

This specifies the SSL/TLS implementation to use.

Syntax

property SSLProvider: TipwTSSLProviders read get_SSLProvider write set_SSLProvider;

TipwTSSLProviders = (
  sslpAutomatic,
  sslpPlatform,
  sslpInternal
);

Default Value

sslpAutomatic

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the component will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:

In most cases using the default value (Automatic) is recommended. The component will select a provider depending on the current platform.

When Automatic is selected, on Windows the component will use the platform implementation. On Linux/macOS the component will use the internal implementation. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used on all platforms.

SSLServerCertEncoded Property (FileMailer Component)

This is the certificate (PEM/Base64 encoded).

Syntax

property SSLServerCertEncoded: String read get_SSLServerCertEncoded;
property SSLServerCertEncodedB: TBytes read get_SSLServerCertEncodedB;

Default Value

''

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The Store and Subject properties also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

This property is read-only and not available at design time.

SSLStartMode Property (FileMailer Component)

Determines how the component starts the SSL negotiation.

Syntax

property SSLStartMode: TipwTSSLStartModes read get_SSLStartMode write set_SSLStartMode;

TipwTSSLStartModes = (
  sslAutomatic,
  sslImplicit,
  sslExplicit,
  sslNone
);

Default Value

sslNone

Remarks

The SSLStartMode property may have one of the following values:

Subject Property (FileMailer Component)

The subject of the mail message (optional).

Syntax

property Subject: String read get_Subject write set_Subject;

Default Value

''

Remarks

The string in this property is sent with a Subject SMTP header to the mail recipient.

If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.

Timeout Property (FileMailer Component)

A timeout for the component.

Syntax

property Timeout: Integer read get_Timeout write set_Timeout;

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the component will wait for the operation to complete before returning control.

The component will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the component raises an exception.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

User Property (FileMailer Component)

A user identifier to login as in the MailServer .

Syntax

property User: String read get_User write set_User;

Default Value

''

Remarks

If this property is set to a non-empty string, then when connecting to the MailServer an AUTH or CRAM-MD5 (depending on the value of AuthMechanism) command is sent in order to provide authentication information for the user.

This property is not available at design time.

AddAttachment Method (FileMailer Component)

This adds FileName as an attachment.

Syntax

procedure AddAttachment(FileName: String);

Remarks

This method adds the file name as an attachment. The full list of attachments is contained in the Attachments property.

Example 1: Adding an Attachment

component.AddAttachment("C:\file1.zip"); component.AddAttachment("C:\file2.zip"); component.Send(); Example 3: Using an Attachments Array

component.AttachmentCount = 1; component.AttachmentName(0) = "name"; component.AttachmentFile(0) = "C:\file.txt";

Config Method (FileMailer Component)

Sets or retrieves a configuration setting.

Syntax

function Config(ConfigurationString: String): String;

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (FileMailer Component)

This method connects to the mail relay and sends the SMTP HELO command.

Syntax

procedure Connect();

Remarks

This method connects to the mail relay and sends the SMTP HELO command, thus preparing to send messages. Any number of messages can later be sent using the Send method.

Example. Connecting and Sending an Email:

control.MailServer = "MyServer" control.From = "me@server.com" control.SendTo = "recipient@server.com" control.Subject = "My Subject" control.MessageText = "This is the message body" control.Connect() control.Send() control.Disconnect()

Disconnect Method (FileMailer Component)

This method disconnects from the SMTP server.

Syntax

procedure Disconnect();

Remarks

This method disconnects from the mail relay.

DoEvents Method (FileMailer Component)

Processes events from the internal message queue.

Syntax

procedure DoEvents();

Remarks

When DoEvents is called, the component processes any available events. If no events are available, it waits for a preset period of time, and then returns.

Interrupt Method (FileMailer Component)

Interrupt the current method.

Syntax

procedure Interrupt();

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ProcessQueue Method (FileMailer Component)

Sends the messages which have previously been queued into QueueDir .

Syntax

procedure ProcessQueue(QueueDir: String);

Remarks

This method sends the messages which have previously been queued into QueueDir. The PITrail event shows the interaction with the server as messages as are processed.

This method looks in the directory for files with extension ".queued" and starts processing them.

When processing starts, the file extension is changed to ".sending". If an error happens at this stage, the sending process is aborted, and the file extension is changed to ".failed".

If the file is successfully sent, the file is normally deleted, unless the KeepQueue configuration setting is set to True, in which case the file extension is instead changed to ".sent" and the queue file is not deleted.

Queue Method (FileMailer Component)

Queues the message into QueueDir .

Syntax

function Queue(QueueDir: String): String;

Remarks

This method queues the message into QueueDir. The message is queued into a unique file into the directory QueueDir for future processing.

QueueDir must already exist, or an error will be generated. Alternatively, QueueDir may be set to "*" to return the result as a string instead of writing it to a file.

The method returns the name of the unique queue file created in QueueDir. The file extension is ".queued".

Please refer to the ProcessQueue method for more information on email queue processing.

Reset Method (FileMailer Component)

Reset the component.

Syntax

procedure Reset();

Remarks

This method will reset the component's properties to their default values.

ResetHeaders Method (FileMailer Component)

Resets all the message headers to empty.

Syntax

procedure ResetHeaders();

Remarks

This method resets all the message headers to '' (empty string). Use this method before creating a new message, so that headers from the previous message are not carried over to the next one.

Send Method (FileMailer Component)

This sends the current message and the MIME-encoded attachment.

Syntax

procedure Send();

Remarks

This method sends the current message and the MIME-encoded attachment. If the component is not connected to the mail relay, a connection is created, the message is sent, and then the connection is closed unless an error occurs.

If the component is already connected (by use of the Connect method), the connection will remain open after the message is sent. To disconnect, call the Disconnect method.

SendCommand Method (FileMailer Component)

Sends the exact command directly to the server.

Syntax

procedure SendCommand(Command: String);

Remarks

This method sends the command specified by Command to the server exactly as it is provided. Use this method to send additional or custom commands directly to the server.

After calling this method check the LastReply property and/or monitor the PITrail event to obtain the server's response.

SetMessageStream Method (FileMailer Component)

Sets the stream to be uploaded to the server as part of the message.

Syntax

procedure SetMessageStream(MessageStream: TStream);

Remarks

This method sets the stream to be uploaded to the server as part of the message. If an upload stream is set before the Send method is called, the content of the stream will be read by the component and uploaded to the server; The stream should be open and normally set to position 0. The component will automatically close this stream if CloseStreamAfterTransfer is set to true (default). If the stream is closed, you will need to call this method again before calling Send again. The content of the stream will be read from the current position all the way to the end.

Note: This method and LocalFile will reset the other.

ConnectionStatus Event (FileMailer Component)

This event is fired to indicate changes in the connection state.

Syntax

type TConnectionStatusEvent = procedure (
  Sender: TObject;
  const ConnectionEvent: String;
  StatusCode: Integer;
  const Description: String
) of Object;

property OnConnectionStatus: TConnectionStatusEvent read FOnConnectionStatus write FOnConnectionStatus;

Remarks

The ConnectionStatus event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

EndTransfer Event (FileMailer Component)

This event is fired when the message text completes transferring.

Syntax

type TEndTransferEvent = procedure (
  Sender: TObject;
  Direction: Integer
) of Object;

property OnEndTransfer: TEndTransferEvent read FOnEndTransfer write FOnEndTransfer;

Remarks

If MessageText is not empty, the EndTransfer event is fired when the MessageText finishes transferring from the local host to the MailServer. If MessageText is empty, the event is not fired.

If a file is attached to the MessageText via the AttachedFile property, then EndTransfer fires again when the file finishes transferring. For more information, go to the description of the AttachedFile property.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Error Event (FileMailer Component)

Fired when information is available about errors during data delivery.

Syntax

type TErrorEvent = procedure (
  Sender: TObject;
  ErrorCode: Integer;
  const Description: String
) of Object;

property OnError: TErrorEvent read FOnError write FOnError;

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

PITrail Event (FileMailer Component)

Traces the commands sent to the mail server, and the respective replies.

Syntax

type TPITrailEvent = procedure (
  Sender: TObject;
  Direction: Integer;
  const Message: String
) of Object;

property OnPITrail: TPITrailEvent read FOnPITrail write FOnPITrail;

Remarks

The PITrail event is useful for debugging purposes. It shows all the interaction between the client and the server, line by line, except for message header and body transfers.

The Message parameter contains the full text of the message. The Direction parameter shows the originator of the message:

SSLServerAuthentication Event (FileMailer Component)

Fired after the server presents its certificate to the client.

Syntax

type TSSLServerAuthenticationEvent = procedure (
  Sender: TObject;
  CertEncoded: String;
  CertEncodedB: TBytes;
  const CertSubject: String;
  const CertIssuer: String;
  const Status: String;
  var Accept: Boolean
) of Object;

property OnSSLServerAuthentication: TSSLServerAuthenticationEvent read FOnSSLServerAuthentication write FOnSSLServerAuthentication;

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (FileMailer Component)

Fired when secure connection progress messages are available.

Syntax

type TSSLStatusEvent = procedure (
  Sender: TObject;
  const Message: String
) of Object;

property OnSSLStatus: TSSLStatusEvent read FOnSSLStatus write FOnSSLStatus;

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

StartTransfer Event (FileMailer Component)

Fired when the message text starts transferring.

Syntax

type TStartTransferEvent = procedure (
  Sender: TObject;
  Direction: Integer
) of Object;

property OnStartTransfer: TStartTransferEvent read FOnStartTransfer write FOnStartTransfer;

Remarks

If MessageText is not empty, the StartTransfer event is fired when the MessageText starts transferring from the local host to the MailServer. If MessageText is empty, the event is not fired.

If a file is attached to the MessageText via the AttachedFile property, then StartTransfer fires again when the file starts transferring. Please go to the description of the AttachedFile property for more information.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Transfer Event (FileMailer Component)

Fired while the message text gets transferred to MailServer .

Syntax

type TTransferEvent = procedure (
  Sender: TObject;
  Direction: Integer;
  BytesTransferred: Int64;
  PercentDone: Integer;
  Text: String;
  TextB: TBytes
) of Object;

property OnTransfer: TTransferEvent read FOnTransfer write FOnTransfer;

Remarks

One or more Transfer events are fired during message delivery. Messages consist of MessageText and an optional AttachedFile. The BytesTransferred parameter shows the number of bytes sent starting from the beginning of MessageText and/or AttachedFile.

Text contains the current portion of the message being sent.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

FileAttachment Type

This describes the file being attached.

Remarks

This contains information about the location of the file that is being attached to the message.

Fields

Constructors

constructor Create();

constructor Create(valFile: String);

constructor Create(valName: String; valFile: String);

Firewall Type

The firewall the component will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall, such as the firewall Host and the FirewallType.

Fields

Constructors

constructor Create();

MessageRecipient Type

This types describes the message recipient.

Remarks

This type describes who the message is sent to. It includes fields to denote the name and email address of the recipient of the message. The type of recipient must also be specified if the component is sending the message.

Fields

Constructors

constructor Create();

constructor Create(valAddress: String);

Config Settings (FileMailer Component)

FileMailer Config Settings

SMTP Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Socket Config Settings

Base Config Settings

Trappable Errors (FileMailer Component)

FileMailer Errors

The component may also return one of the following error codes, which are inherited from other components.

MIME Errors

SMTP Errors

The component may also return one of the following error codes, which are inherited from other components.

TCPClient Errors

SSL Errors

TCP/IP Errors