SMPP Module

Properties Methods Events Config Settings Errors

The Smpp Module implements a lightweight message transmission interface using the Short Message Peer-to-Peer protocol, most known for its use in cellular text messaging.

Syntax

IPWorks.Smpp

Remarks

The Smpp class supports both plaintext and Secure Sockets Layer/Transport Layer Security (SSL/TLS) connections. When connecting over SSL/TLS the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL related settings are also supported via the Config method.

The Smpp Class will bind as a transceiver, and thus it can send and receive messages from the server. Additionally, it can send single and multirecipient messages and also can upload data.

Using Smpp is quite easy. First, simply set the SMPPServer, SMPPPort, and, if needed, the SMPPVersion properties. Second, a single call to the Connect method with a specified user Id and password will connect the class.

Transmitting messages is just as easy. You can manipulate the Recipients properties directly, or just use AddRecipient method to add recipients one at a time to the recipient list. After all recipients have been added, a single call to the SendMessage method will transmit the specified message. If the send is successful, the method will set and return the value of the MessageId property. Otherwise, an Error event will fire for each unsuccessful message destination.

The Smpp Class supports message and data transmission, as well as auxiliary operations, such as CheckMessageStatus and ReplaceMessage. All nonimplemented features of the protocol are supported through the SendCommand method and PITrail event. Because of the nature of the protocol, all methods and operations are implemented synchronously.

Property List

The following is the full list of the properties of the module with short descriptions. Click on the links for further details.


Connected	This property indicates whether or not the module is bound.
Firewall	A set of properties related to firewall access.
Idle	The current status of the module.
LocalHost	The name of the local host or user-assigned IP interface through which connections are initiated or accepted.
MessageExpiration	This property denotes the validity period of the current message.
MessageId	This property indicates the identifier of the most recently sent message.
MessagePriority	This property indicates the priority level of the current message.
Password	This property contains the user's password.
Protocol	This property defines the SMPP protocol to be used.
Recipients	This property includes the list of message recipients.
ScheduledDelivery	This property tells the server when to deliver the current message.
SenderAddress	This property contains the address of the External Short Messaging Entity (ESME).
ServiceType	This property indicates the type of service for the current message.
SMPPPort	This property contains the server port for secure SMPP (default 2775).
SMPPServer	This property is the SMPP entity to which the module will connect.
SMPPVersion	This property indicates the SMPP version to be used throughout the connection.
SSLAcceptServerCertEncoded	This is the certificate (PEM/Base64 encoded).
SSLCertEncoded	This is the certificate (PEM/Base64 encoded).
SSLCertStore	This is the name of the certificate store for the client certificate.
SSLCertStorePassword	If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
SSLCertStoreType	This is the type of certificate store for this certificate.
SSLCertSubject	This is the subject of the certificate used for client authentication.
SSLEnabled	Whether TLS/SSL is enabled.
SSLProvider	This specifies the SSL/TLS implementation to use.
SSLServerCertEncoded	This is the certificate (PEM/Base64 encoded).
SSLStartMode	Determines how the module starts the SSL negotiation.
SystemType	This property contains a string representing the type of system during a connection.
Timeout	A timeout for the module.
UserId	This property is used for identification with the SMPP service.

Method List

The following is the full list of the methods of the module with short descriptions. Click on the links for further details.


AddRecipient	This method will add a recipient of the specified type to the recipient list.
CancelMessage	This method will cancel the specified message.
CheckLink	This method will check the connection to the server.
CheckMessageStatus	This method will retrieve the status of the specified message.
Config	Sets or retrieves a configuration setting.
Connect	This method will bind as a transceiver to the SMPP service.
ConnectTo	This method will bind as a transceiver to the SMPP service.
Disconnect	This method will disconnect from the SMPP service.
DoEvents	This method processes events from the internal message queue.
Interrupt	Interrupt the current method.
ReplaceMessage	This method replaces a previously sent message with a new one.
Reset	Reset the module.
SendCommand	This method will format and send a protocol data unit (PDU) using the specified command identifier and payload.
SendData	This method sends raw data to Recipients .
SendMessage	This method sends a message to all recipients in the recipient list.

Event List

The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.


Connected	This event is fired after a successful bind operation.
ConnectionStatus	This event is fired to indicate changes in the connection state.
Disconnected	This event is fired when connection to the SMS service is lost.
Error	This event is fired when the server detects an error.
MessageIn	This event is fired upon receipt of a message.
MessageStatus	This event is fired upon receipt of a message.
PITrail	This event is fired once for each protocol data unit (PDU) sent between the client and server.
ReadyToSend	This event is fired when the module is ready to send data.
SSLServerAuthentication	Fired after the server presents its certificate to the client.
SSLStatus	Fired when secure connection progress messages are available.

Config Settings

The following is a list of config settings for the module with short descriptions. Click on the links for further details.


AddressRange	Specifies the addr_range parameter when binding.
BinaryDataCoding	Whether or not to binary encode the message when DataCoding is set.
BindAsReceiver	Causes the module to bind as a receiver.
BindAsTransmitter	Causes the module to bind as a transmitter.
CustomTLV	Optional TLV parameters added after the mandatory parameters and before the payload.
DataCoding	The data encoding mechanism to be used for the current message.
DecodeHexStrings	Will decode an ascii hex-representation of binary data prior to transmission.
DestinationNPI	The Number Planning Indicator for the destination ESME.
DestinationTON	The Type of Number for the destination ESME.
DoSplitLargeMessages	Splits long messages and returns the UDH and Message Parts.
HexString	A hex-encoded binary string to be sent to the current recipient.
IncomingDestinationAddress	Returns the dest_addr field inside the received message.
IntermediateNotification	Causes the module to request intermediate notification.
MaxCIMDSMSLength	Indicates the maximum SMS message length for the CIMD protocol.
MaxSMSLength	Indicates the maximum SMS message length.
MCReceipt	The Type of MC Delivery Receipt requested.
MessageInReceiptedMessageId	The receipted_message_id field of an incoming deliver_sm PDU.
MessageMode	The Type of Messaging Mode requested.
MessageType	The Type of Message.
PDUFormat	The format of the PDU.
ProtocolId	The protocol identifier.
ReplaceIfPresent	Indicates whether the replace_if_present_flag is enabled when sending a message.
SMEAcknowledgement	The Type of SME originated acknowledgement requested.
SourceNPI	The Number Planning Indicator for the ESME.
SourceTON	The Type of Number for the ESME.
SplitLargeMessages	Determines whether large messages are split into multiple parts.
SplitMessageMethod	Determines how large messages are split into multiple parts.
StatusReportRequest	Defines in what cases a status report is created by the server.
SubAddr	Defines a unique index for application instance.
SynchronousSendCommand	Controls whether SendCommand behaves synchronously or asynchronously.
SynchronousSendMessage	Controls whether SendMessage behaves synchronously or asynchronously.
UseGSM7BitEncoding	Whether or not to use GSM 7-bit encoding.
UseGSM7bitEncodingCompression	Whether to compress GSM 7-bit encoded characters.
WaitForBanner	Specifies the CIMD2 banner the module will wait for when connecting.
ConnectionTimeout	Sets a separate timeout value for establishing a connection.
FirewallAutoDetect	Tells the module whether or not to automatically detect and use firewall system settings, if available.
FirewallHost	Name or IP address of firewall (optional).
FirewallPassword	Password to be used if authentication is to be used when connecting through the firewall.
FirewallPort	The TCP port for the FirewallHost;.
FirewallType	Determines the type of firewall to connect through.
FirewallUser	A user name if authentication is to be used connecting through a firewall.
KeepAliveInterval	The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTime	The inactivity time in milliseconds before a TCP keep-alive packet is sent.
Linger	When set to True, connections are terminated gracefully.
LingerTime	Time in seconds to have the connection linger.
LocalHost	The name of the local host through which connections are initiated or accepted.
LocalPort	The port in the local host where the module binds.
MaxLineLength	The maximum amount of data to accumulate when no EOL is found.
MaxTransferRate	The transfer rate limit in bytes per second.
ProxyExceptionsList	A semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAlive	Determines whether or not the keep alive socket option is enabled.
TcpNoDelay	Whether or not to delay when sending packets.
UseIPv6	Whether to use IPv6.
LogSSLPackets	Controls whether SSL packets are logged when using the internal security API.
OpenSSLCADir	The path to a directory containing CA certificates.
OpenSSLCAFile	Name of the file containing the list of CA's trusted by your application.
OpenSSLCipherList	A string that controls the ciphers to be used by SSL.
OpenSSLPrngSeedData	The data to seed the pseudo random number generator (PRNG).
ReuseSSLSession	Determines if the SSL session is reused.
SSLCACerts	A newline separated list of CA certificate to use during SSL client authentication.
SSLCheckCRL	Whether to check the Certificate Revocation List for the server certificate.
SSLCheckOCSP	Whether to use OCSP to check the status of the server certificate.
SSLCipherStrength	The minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuites	The cipher suite to be used in an SSL negotiation.
SSLEnabledProtocols	Used to enable/disable the supported security protocols.
SSLEnableRenegotiation	Whether the renegotiation_info SSL extension is supported.
SSLIncludeCertChain	Whether the entire certificate chain is included in the SSLServerAuthentication event.
SSLKeyLogFile	The location of a file where per-session secrets are written for debugging purposes.
SSLNegotiatedCipher	Returns the negotiated cipher suite.
SSLNegotiatedCipherStrength	Returns the negotiated cipher suite strength.
SSLNegotiatedCipherSuite	Returns the negotiated cipher suite.
SSLNegotiatedKeyExchange	Returns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrength	Returns the negotiated key exchange algorithm strength.
SSLNegotiatedVersion	Returns the negotiated protocol version.
SSLSecurityFlags	Flags that control certificate verification.
SSLServerCACerts	A newline separated list of CA certificate to use during SSL server certificate validation.
TLS12SignatureAlgorithms	Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.
TLS12SupportedGroups	The supported groups for ECC.
TLS13KeyShareGroups	The groups for which to pregenerate key shares.
TLS13SignatureAlgorithms	The allowed certificate signature algorithms.
TLS13SupportedGroups	The supported groups for (EC)DHE key exchange.
AbsoluteTimeout	Determines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallData	Used to send extra data to the firewall.
InBufferSize	The size in bytes of the incoming queue of the socket.
OutBufferSize	The size in bytes of the outgoing queue of the socket.
BuildInfo	Information about the product's build.
CodePage	The system code page used for Unicode to Multibyte translations.
LicenseInfo	Information about the current license.
MaskSensitive	Whether sensitive data is masked in log messages.
UseInternalSecurityAPI	Whether or not to use the system security libraries or an internal implementation.

Connected Property (SMPP Module)

This property indicates whether or not the module is bound.

public var connected: Bool {
  get {...}
}


@property (nonatomic,readonly,assign,getter=connected) BOOL connected;

- (BOOL)connected;

Default Value

False

Remarks

The value of this property indicates whether or not the class has successfully bound to the SMPPServer. It will not be true until a successful Connected event has fired.

The two ways to bind are (1) by calling Connect with a user identifier and password, which will set the UserId and Password properties before connecting; or (2) by setting those two properties and calling SendMessage while not connected.

Note: It is recommended to use the Connect or Disconnect method instead of setting this property.

This property is read-only.

Firewall Property (SMPP Module)

A set of properties related to firewall access.

Syntax

Swift
Objective-C

public var firewall: Firewall {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=firewallAutoDetect,setter=setFirewallAutoDetect:) BOOL firewallAutoDetect;

- (BOOL)firewallAutoDetect;
- (void)setFirewallAutoDetect :(BOOL)newFirewallAutoDetect;

@property (nonatomic,readwrite,assign,getter=firewallType,setter=setFirewallType:) int firewallType;

- (int)firewallType;
- (void)setFirewallType :(int)newFirewallType;

@property (nonatomic,readwrite,assign,getter=firewallHost,setter=setFirewallHost:) NSString* firewallHost;

- (NSString*)firewallHost;
- (void)setFirewallHost :(NSString*)newFirewallHost;

@property (nonatomic,readwrite,assign,getter=firewallPassword,setter=setFirewallPassword:) NSString* firewallPassword;

- (NSString*)firewallPassword;
- (void)setFirewallPassword :(NSString*)newFirewallPassword;

@property (nonatomic,readwrite,assign,getter=firewallPort,setter=setFirewallPort:) int firewallPort;

- (int)firewallPort;
- (void)setFirewallPort :(int)newFirewallPort;

@property (nonatomic,readwrite,assign,getter=firewallUser,setter=setFirewallUser:) NSString* firewallUser;

- (NSString*)firewallUser;
- (void)setFirewallUser :(NSString*)newFirewallUser;

Default Value

Remarks

This is a Firewall-type property, which contains fields describing the firewall through which the class will attempt to connect.

Idle Property (SMPP Module)

The current status of the module.

Syntax

Swift
Objective-C

public var idle: Bool {
  get {...}
}


@property (nonatomic,readonly,assign,getter=idle) BOOL idle;

- (BOOL)idle;

Default Value

True

Remarks

Idle will be False if the component is currently busy (communicating and/or waiting for an answer), and True at all other times.

This property is read-only.

LocalHost Property (SMPP Module)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

Swift
Objective-C

public var localHost: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=localHost,setter=setLocalHost:) NSString* localHost;

- (NSString*)localHost;
- (void)setLocalHost :(NSString*)newLocalHost;

Default Value

Remarks

The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

MessageExpiration Property (SMPP Module)

This property denotes the validity period of the current message.

Syntax

Swift
Objective-C

public var messageExpiration: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=messageExpiration,setter=setMessageExpiration:) NSString* messageExpiration;

- (NSString*)messageExpiration;
- (void)setMessageExpiration :(NSString*)newMessageExpiration;

Default Value

Remarks

This property indicates the Message Center expiration time, after which the message should be discarded if not delivered to the destination. It can be set using absolute or relative time formats.

Absolute Time Format is a 16-character string represented as "YYMMDDhhmmsstnnp" where:


YY	the last two digits of the year (00-99)
MM	month (01-12)
DD	day (01-31)
hh	hour (00-23)
mm	minute (00-59)
ss	second (00-59)
t	tenths of a second (0-9)
nn	quarter-hour time difference between local time and UTC time (00-48)
p	"+" or "-" indicating the direction of the time offset in `nn`

Relative Time Format is the same 16-character string where "p" should be set to "R" for "relative". For relative time, "tnn" are ignored and thus should be set to a constant value of "000".

MessageId Property (SMPP Module)

This property indicates the identifier of the most recently sent message.

Syntax

Swift
Objective-C

public var messageId: String {
  get {...}
}


@property (nonatomic,readonly,assign,getter=messageId) NSString* messageId;

- (NSString*)messageId;

Default Value

Remarks

This property indicates the identifier of the most recently sent message. After a successful call to SendMessage, this property will be set to the server-assigned Id for that message.

This property is read-only.

MessagePriority Property (SMPP Module)

This property indicates the priority level of the current message.

Syntax

Swift
Objective-C

public var messagePriority: SmppMessagePriorities {
  get {...}
  set {...}
}

public enum SmppMessagePriorities: Int32 {
  case smppMessagePriorityLow = 0
  case smppMessagePriorityNormal = 1
  case smppMessagePriorityHigh = 2
  case smppMessagePriorityUrgent = 3
}


@property (nonatomic,readwrite,assign,getter=messagePriority,setter=setMessagePriority:) int messagePriority;

- (int)messagePriority;
- (void)setMessagePriority :(int)newMessagePriority;

Default Value

Remarks

When sending a message, this property will tell the server what type of priority to assign to the message. The effect of the message priority setting depends on the Message Center (MC) manufacturer and the network on which the target recipient lies. For example, some MCs may immediately forward "urgent" messages, some networks may use the priority setting as a visual indicator of the message's urgency (e.g., blinking icons), and some networks may entirely ignore the priority setting.

Password Property (SMPP Module)

This property contains the user's password.

Syntax

Swift
Objective-C

public var password: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=password,setter=setPassword:) NSString* password;

- (NSString*)password;
- (void)setPassword :(NSString*)newPassword;

Default Value

Remarks

This property contains the user's password. When binding to the SMPPServer, the client must provide a known user identifier and a valid password for that Id.

The two ways to bind are (1) by calling Connect with a user identifier and password, which will set the UserId and this property before connecting; or (2) by setting those two properties and calling SendMessage while not connected.

Protocol Property (SMPP Module)

This property defines the SMPP protocol to be used.

Syntax

Swift
Objective-C

public var protocol_: SmppProtocols {
  get {...}
  set {...}
}

public enum SmppProtocols: Int32 {
  case smppSMPP = 0
  case smppCIMD2 = 1
}


@property (nonatomic,readwrite,assign,getter=protocol,setter=setProtocol:) int protocol;

- (int)protocol;
- (int)protocol_;
- (void)setProtocol :(int)newProtocol;
- (void)setProtocol_ :(int)newProtocol;

Default Value

Remarks

This property defines the protocol to be used when connecting to the server. Possible values are as follows:


0 (smppSMPP - default)	SMPP for traditional SMPP servers
1 (smppCIMD2)	CIMD2 for Nokia Short Message Service Center servers

Recipients Property (SMPP Module)

This property includes the list of message recipients.

Syntax

Swift
Objective-C

public var recipients: Array<SMPPRecipient> {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=recipientCount,setter=setRecipientCount:) int recipientCount;

- (int)recipientCount;
- (void)setRecipientCount :(int)newRecipientCount;

- (NSString*)recipientAddress:(int)recipientIndex;
- (void)setRecipientAddress:(int)recipientIndex :(NSString*)newRecipientAddress;

- (int)recipientType:(int)recipientIndex;
- (void)setRecipientType:(int)recipientIndex :(int)newRecipientType;

Default Value

Remarks

This property is used to specify the recipient(s) of the message. Each recipient is represented by an SMPPRecipient type, which contains fields for the address and type of address for the recipient.

An AddRecipient method also may be used to add recipients to this collection property.

ScheduledDelivery Property (SMPP Module)

This property tells the server when to deliver the current message.

Syntax

Swift
Objective-C

public var scheduledDelivery: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=scheduledDelivery,setter=setScheduledDelivery:) NSString* scheduledDelivery;

- (NSString*)scheduledDelivery;
- (void)setScheduledDelivery :(NSString*)newScheduledDelivery;

Default Value

Remarks

This property is used by the class when sending a message to inform the Message Center to forward the message to the intended recipients at a specific time. It can be set using absolute or relative time formats.

Absolute Time Format is a 16-character string represented as "YYMMDDhhmmsstnnp" where:


YY	the last two digits of the year (00-99)
MM	month (01-12)
DD	day (01-31)
hh	hour (00-23)
mm	minute (00-59)
ss	second (00-59)
t	tenths of a second (0-9)
nn	quarter-hour time difference between local time and UTC time (00-48)
p	"+" or "-" indicating the direction of the time offset in `nn`

Relative Time Format is the same 16-character string where "p" should be set to "R" for "relative". For relative time, "tnn" are ignored and thus should be set to a constant value of "000".

SenderAddress Property (SMPP Module)

This property contains the address of the External Short Messaging Entity (ESME).

Syntax

Swift
Objective-C

public var senderAddress: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=senderAddress,setter=setSenderAddress:) NSString* senderAddress;

- (NSString*)senderAddress;
- (void)setSenderAddress :(NSString*)newSenderAddress;

Default Value

Remarks

This property contains the address of the External Short Messaging Entity (ESME). The SMPP protocol allows an ESME to specify its address, whether it is a phone number or an IP address. If this property is not set, the class will default to the value in LocalHost.

ServiceType Property (SMPP Module)

This property indicates the type of service for the current message.

Syntax

Swift
Objective-C

public var serviceType: SmppServiceTypes {
  get {...}
  set {...}
}

public enum SmppServiceTypes: Int32 {
  case smppServiceDefault = 0
  case smppServiceCMT = 1
  case smppServiceCPT = 2
  case smppServiceVMN = 3
  case smppServiceVMA = 4
  case smppServiceWAP = 5
  case smppServiceUSSD = 6
  case smppServiceCBS = 7
}


@property (nonatomic,readwrite,assign,getter=serviceType,setter=setServiceType:) int serviceType;

- (int)serviceType;
- (void)setServiceType :(int)newServiceType;

Default Value

Remarks

When sending messages, this property is used to define the SMS application service to be associated with the message. The Message Center (MC) will use the value to determine the availability of enhanced messaging services and to control the teleservice used on the air interface.

The values are defined in the SMPP 5.0 specification as follows:


"" (NULL)	MC Default
CMT	Cellular Messaging
CPT	Cellular Paging
VMN	Voice Mail Notification
VMA	Voice Mail Alerting
WAP	Wireless Application Protocol
USSD	Unstructured Supplementary Services Data
CBS	Cell Broadcast Service

SMPPPort Property (SMPP Module)

This property contains the server port for secure SMPP (default 2775).

Syntax

Swift
Objective-C

public var smppPort: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=SMPPPort,setter=setSMPPPort:) int SMPPPort;

- (int)SMPPPort;
- (void)setSMPPPort :(int)newSMPPPort;

Default Value

2775

Remarks

For an implicit Secure Sockets Layer (SSL), use port 3551 (please refer to the SSLStartMode property for more information).

A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

SMPPServer Property (SMPP Module)

This property is the SMPP entity to which the module will connect.

Syntax

Swift
Objective-C

public var smppServer: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=SMPPServer,setter=setSMPPServer:) NSString* SMPPServer;

- (NSString*)SMPPServer;
- (void)setSMPPServer :(NSString*)newSMPPServer;

Default Value

Remarks

This property is the instant messaging server to which the class will connect when the Connect method is called. This property must contain a valid SMPP service application address.

SMPPVersion Property (SMPP Module)

This property indicates the SMPP version to be used throughout the connection.

Syntax

Swift
Objective-C

public var smppVersion: SmppSMPPVersions {
  get {...}
  set {...}
}

public enum SmppSMPPVersions: Int32 {
  case smppVersion50 = 0
  case smppVersion34 = 1
  case smppVersion33 = 2
}


@property (nonatomic,readwrite,assign,getter=SMPPVersion,setter=setSMPPVersion:) int SMPPVersion;

- (int)SMPPVersion;
- (void)setSMPPVersion :(int)newSMPPVersion;

Default Value

Remarks

This property contains the SMPP version to be used throughout the connection.

The default value is version 3.4 because it is the most widely used version of the protocol.

Choosing the highest mutually supported version is generally recommended. Version 3.4 is the default value; however, if version 5.0 is supported, it is recommended.

SSLAcceptServerCertEncoded Property (SMPP Module)

This is the certificate (PEM/Base64 encoded).

Syntax

Swift
Objective-C

public var sslAcceptServerCertEncoded: String {
  get {...}
  set {...}
}

public var sslAcceptServerCertEncodedB: Data {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=SSLAcceptServerCertEncoded,setter=setSSLAcceptServerCertEncoded:) NSString* SSLAcceptServerCertEncoded;

- (NSString*)SSLAcceptServerCertEncoded;
- (void)setSSLAcceptServerCertEncoded :(NSString*)newSSLAcceptServerCertEncoded;

@property (nonatomic,readwrite,assign,getter=SSLAcceptServerCertEncodedB,setter=setSSLAcceptServerCertEncodedB:) NSData* SSLAcceptServerCertEncodedB;

- (NSData*)SSLAcceptServerCertEncodedB;
- (void)setSSLAcceptServerCertEncodedB :(NSData*)newSSLAcceptServerCertEncoded;

Default Value

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:

public func setSSLAcceptServerCertEncodedB(sslAcceptServerCertEncoded: Data) throws
public func setSSLAcceptServerCertEncoded(sslAcceptServerCertEncoded: String) throws

SSLCertEncoded Property (SMPP Module)

This is the certificate (PEM/Base64 encoded).

Syntax

Swift
Objective-C

public var sslCertEncoded: String {
  get {...}
  set {...}
}

public var sslCertEncodedB: Data {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=SSLCertEncoded,setter=setSSLCertEncoded:) NSString* SSLCertEncoded;

- (NSString*)SSLCertEncoded;
- (void)setSSLCertEncoded :(NSString*)newSSLCertEncoded;

@property (nonatomic,readwrite,assign,getter=SSLCertEncodedB,setter=setSSLCertEncodedB:) NSData* SSLCertEncodedB;

- (NSData*)SSLCertEncodedB;
- (void)setSSLCertEncodedB :(NSData*)newSSLCertEncoded;

Default Value

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:

public func setSSLCertEncodedB(sslCertEncoded: Data) throws
public func setSSLCertEncoded(sslCertEncoded: String) throws

SSLCertStore Property (SMPP Module)

This is the name of the certificate store for the client certificate.

Syntax

Swift
Objective-C

public var sslCertStore: String {
  get {...}
  set {...}
}

public var sslCertStoreB: Data {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=SSLCertStore,setter=setSSLCertStore:) NSString* SSLCertStore;

- (NSString*)SSLCertStore;
- (void)setSSLCertStore :(NSString*)newSSLCertStore;

@property (nonatomic,readwrite,assign,getter=SSLCertStoreB,setter=setSSLCertStoreB:) NSData* SSLCertStoreB;

- (NSData*)SSLCertStoreB;
- (void)setSSLCertStoreB :(NSData*)newSSLCertStore;

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

SSLCertStorePassword Property (SMPP Module)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

Swift
Objective-C

public var sslCertStorePassword: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=SSLCertStorePassword,setter=setSSLCertStorePassword:) NSString* SSLCertStorePassword;

- (NSString*)SSLCertStorePassword;
- (void)setSSLCertStorePassword :(NSString*)newSSLCertStorePassword;

Default Value

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

SSLCertStoreType Property (SMPP Module)

This is the type of certificate store for this certificate.

Syntax

Swift
Objective-C

public var sslCertStoreType: SmppSSLCertStoreTypes {
  get {...}
  set {...}
}

public enum SmppSSLCertStoreTypes: Int32 {
  case cstUser = 0
  case cstMachine = 1
  case cstPFXFile = 2
  case cstPFXBlob = 3
  case cstJKSFile = 4
  case cstJKSBlob = 5
  case cstPEMKeyFile = 6
  case cstPEMKeyBlob = 7
  case cstPublicKeyFile = 8
  case cstPublicKeyBlob = 9
  case cstSSHPublicKeyBlob = 10
  case cstP7BFile = 11
  case cstP7BBlob = 12
  case cstSSHPublicKeyFile = 13
  case cstPPKFile = 14
  case cstPPKBlob = 15
  case cstXMLFile = 16
  case cstXMLBlob = 17
  case cstJWKFile = 18
  case cstJWKBlob = 19
  case cstSecurityKey = 20
  case cstBCFKSFile = 21
  case cstBCFKSBlob = 22
  case cstPKCS11 = 23
  case cstAuto = 99
}


@property (nonatomic,readwrite,assign,getter=SSLCertStoreType,setter=setSSLCertStoreType:) int SSLCertStoreType;

- (int)SSLCertStoreType;
- (void)setSSLCertStoreType :(int)newSSLCertStoreType;

Default Value

Remarks

This is the type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: This store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: This store type is only available in Java and .NET.
23 (cstPKCS11)	The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to `cstPKCS11`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SSLCertStore and set SSLCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key: `certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

SSLCertSubject Property (SMPP Module)

This is the subject of the certificate used for client authentication.

Syntax

Swift
Objective-C

public var sslCertSubject: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=SSLCertSubject,setter=setSSLCertSubject:) NSString* SSLCertSubject;

- (NSString*)SSLCertSubject;
- (void)setSSLCertSubject :(NSString*)newSSLCertSubject;

Default Value

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:


Field	Meaning
CN	Common Name. This is commonly a hostname like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:

public func setSSLCertSubject(sslCertSubject: String) throws

SSLEnabled Property (SMPP Module)

Whether TLS/SSL is enabled.

Syntax

Swift
Objective-C

public var sslEnabled: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=SSLEnabled,setter=setSSLEnabled:) BOOL SSLEnabled;

- (BOOL)SSLEnabled;
- (void)setSSLEnabled :(BOOL)newSSLEnabled;

Default Value

False

Remarks

This setting specifies whether TLS/SSL is enabled in the class. When False (default) the class operates in plaintext mode. When True TLS/SSL is enabled.

TLS/SSL may also be enabled by setting SSLStartMode. Setting SSLStartMode will automatically update this property value.

SSLProvider Property (SMPP Module)

This specifies the SSL/TLS implementation to use.

Syntax

Swift
Objective-C

public var sslProvider: SmppSSLProviders {
  get {...}
  set {...}
}

public enum SmppSSLProviders: Int32 {
  case sslpAutomatic = 0
  case sslpPlatform = 1
  case sslpInternal = 2
}


@property (nonatomic,readwrite,assign,getter=SSLProvider,setter=setSSLProvider:) int SSLProvider;

- (int)SSLProvider;
- (void)setSSLProvider :(int)newSSLProvider;

Default Value

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:


0 (sslpAutomatic - default)	Automatically selects the appropriate implementation.
1 (sslpPlatform)	Uses the platform/system implementation.
2 (sslpInternal)	Uses the internal implementation.

Additional Notes

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected the platform implementation will be used by default in all cases in the macOS edition.

SSLServerCertEncoded Property (SMPP Module)

This is the certificate (PEM/Base64 encoded).

Syntax

Swift
Objective-C

public var sslServerCertEncoded: String {
  get {...}
}

public var sslServerCertEncodedB: Data {
  get {...}
}


@property (nonatomic,readonly,assign,getter=SSLServerCertEncoded) NSString* SSLServerCertEncoded;

- (NSString*)SSLServerCertEncoded;

@property (nonatomic,readonly,assign,getter=SSLServerCertEncodedB) NSData* SSLServerCertEncodedB;

- (NSData*)SSLServerCertEncodedB;

Default Value

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

This property is read-only.

If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:

public func setSSLServerCertEncodedB(sslServerCertEncoded: Data) throws
public func setSSLServerCertEncoded(sslServerCertEncoded: String) throws

SSLStartMode Property (SMPP Module)

Determines how the module starts the SSL negotiation.

Syntax

Swift
Objective-C

public var sslStartMode: SmppSSLStartModes {
  get {...}
  set {...}
}

public enum SmppSSLStartModes: Int32 {
  case sslAutomatic = 0
  case sslImplicit = 1
  case sslExplicit = 2
  case sslNone = 3
}


@property (nonatomic,readwrite,assign,getter=SSLStartMode,setter=setSSLStartMode:) int SSLStartMode;

- (int)SSLStartMode;
- (void)setSSLStartMode :(int)newSSLStartMode;

Default Value

Remarks

The SSLStartMode property may have one of the following values:


0 (sslAutomatic)	If the remote port is set to the standard plaintext port of the protocol (where applicable), the class will behave the same as if SSLStartMode is set to sslExplicit. In all other cases, SSL negotiation will be implicit (sslImplicit).
1 (sslImplicit)	The SSL negotiation will start immediately after the connection is established.
2 (sslExplicit)	The class will first connect in plaintext, and then explicitly start SSL negotiation through a protocol command such as STARTTLS.
3 (sslNone - default)	No SSL negotiation, no SSL security. All communication will be in plaintext mode.

SystemType Property (SMPP Module)

This property contains a string representing the type of system during a connection.

Syntax

Swift
Objective-C

public var systemType: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=systemType,setter=setSystemType:) NSString* systemType;

- (NSString*)systemType;
- (void)setSystemType :(NSString*)newSystemType;

Default Value

Remarks

This property contains a string representing the type of system during a connection. Some SMS servers require that a system type be supplied during connection. The system type is a string representation, usually as an abbreviation, of a particular kind of system. The string cannot exceed 12 bytes.

Timeout Property (SMPP Module)

A timeout for the module.

Syntax

Swift
Objective-C

public var timeout: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=timeout,setter=setTimeout:) int timeout;

- (int)timeout;
- (void)setTimeout :(int)newTimeout;

Default Value

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the class will wait for the operation to complete before returning control.

The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the class .

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

UserId Property (SMPP Module)

This property is used for identification with the SMPP service.

Syntax

Swift
Objective-C

public var userId: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=userId,setter=setUserId:) NSString* userId;

- (NSString*)userId;
- (void)setUserId :(NSString*)newUserId;

Default Value

Remarks

This property is used for identification with the SMPP service. When binding to the SMPPServer, the client must provide a known user identifier and a valid password for that Id.

The two ways to bind are (1) by calling Connect with a user Id and password, which will set the UserId and Password properties before connecting; or (2) by setting those two properties and calling SendMessage while not connected.

AddRecipient Method (SMPP Module)

This method will add a recipient of the specified type to the recipient list.

Syntax

Swift
Objective-C

public func addRecipient(recipientType: Int32, recipientAddress: String) throws -> Void

- (void)addRecipient:(int)recipientType :(NSString*)recipientAddress;

Remarks

This method will add a recipient of the specified type to the recipient list. For normal-type recipients, the addresses should be either a dotted IPv4 address (for sending messages to other SMS-enabled applications) or the directory number of a mobile phone. To send messages to distributed lists, the name of the list should be used.

Valid values for RecipientType are as follows:


0 (smppRecipientTypeNormal)	Normal SME (Short Message Entity) Address
1 (smppRecipientTypeList)	Distribution List

CancelMessage Method (SMPP Module)

This method will cancel the specified message.

Syntax

Swift
Objective-C

public func cancelMessage(messageId: String) throws -> Void

- (void)cancelMessage:(NSString*)messageId;

Remarks

This method will cancel the message stored on the SMPPServer under the value in MessageId.

CheckLink Method (SMPP Module)

This method will check the connection to the server.

Syntax

Swift
Objective-C

public func checkLink() throws -> Void

- (void)checkLink;

Remarks

This method will check the connection to the server. This method is used to ensure that the host on the other end of the connection is still active, or that it is still available. Although a socket connection may still be available between the client and server, the SMS application on the server may have been taken offline without releasing the socket or the CPU may be bogged down. This method will send a PDU to the server and wait the length of Timeout for a response.

CheckMessageStatus Method (SMPP Module)

This method will retrieve the status of the specified message.

Syntax

Swift
Objective-C

public func checkMessageStatus(messageId: String) throws -> Void

- (void)checkMessageStatus:(NSString*)messageId;

Remarks

This method will retrieve the last known status of the message stored on the server under MessageId. The class will fire a MessageStatus containing the parsed response from the server.

Config Method (SMPP Module)

Sets or retrieves a configuration setting.

Syntax

Swift
Objective-C

public func config(configurationString: String) throws -> String

- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (SMPP Module)

This method will bind as a transceiver to the SMPP service.

Syntax

Swift
Objective-C

public func connect() throws -> Void

- (void)connect;

Remarks

This method will establish a socket connection to the SMPPServer and attempt to bind as a transceiver. Once the bind operation has been completed, a Connected event will be fired containing the status of the connection.

ConnectTo Method (SMPP Module)

This method will bind as a transceiver to the SMPP service.

Syntax

Swift
Objective-C

public func connectTo(userId: String, password: String) throws -> Void

- (void)connectTo:(NSString*)userId :(NSString*)password;

Remarks

This method will establish a socket connection to the SMPPServer and attempt to bind as a transceiver. Once the bind operation has completed, a Connected event will be fired containing the status of the connection.

Disconnect Method (SMPP Module)

This method will disconnect from the SMPP service.

Syntax

Swift
Objective-C

public func disconnect() throws -> Void

- (void)disconnect;

Remarks

This method will send an unbind command and close the socket connection to the SMPPServer. After an unbind operation and socket closing, a Disconnected event will be fired containing the status of the unbind operation.

DoEvents Method (SMPP Module)

This method processes events from the internal message queue.

Syntax

Swift
Objective-C

public func doEvents() throws -> Void

- (void)doEvents;

Remarks

When this method is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.

Interrupt Method (SMPP Module)

Interrupt the current method.

Syntax

Swift
Objective-C

public func interrupt() throws -> Void

- (void)interrupt;

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ReplaceMessage Method (SMPP Module)

This method replaces a previously sent message with a new one.

Syntax

Swift
Objective-C

public func replaceMessage(messageId: String, newMessage: String) throws -> Void

- (void)replaceMessage:(NSString*)messageId :(NSString*)newMessage;

Remarks

Assuming that a message on the SMPPServer is being stored under the value in MessageId, this method will replace that message with the value in NewMessage.

If no message corresponds to MessageId, the SMS service will respond with an error message.

Reset Method (SMPP Module)

Reset the component.

Syntax

Swift
Objective-C

public func reset() throws -> Void

- (void)reset;

Remarks

This method will reset the class's properties to their default values.

SendCommand Method (SMPP Module)

This method will format and send a protocol data unit (PDU) using the specified command identifier and payload.

Syntax

Swift
Objective-C

public func sendCommand(commandId: Int32, payload: Data) throws -> Data

- (NSData*)sendCommand:(int)commandId :(NSData*)payload;

Remarks

This method offers a way to do more with the class than is directly supported. This method takes a command identifier and a payload, which includes every required and optional field after the header, and creates the 16-byte header for it before sending it to the server. The response PDU is returned both in the PITrail and by this method.

SendData Method (SMPP Module)

This method sends raw data to Recipients .

Syntax

Swift
Objective-C

public func sendData(data: Data) throws -> String

- (NSString*)sendData:(NSData*)data;

Remarks

This method sends raw data to Recipients. Up to 64 KB of additional data can be supplied at a time for transmission to the SMPPServer. Unlike the SendMessage method, this method can send to only one destination at a time. The target is whatever value is in the Recipients properties.

SendMessage Method (SMPP Module)

This method sends a message to all recipients in the recipient list.

Syntax

Swift
Objective-C

public func sendMessage(message: String) throws -> String

- (NSString*)sendMessage:(NSString*)message;

Remarks

This method sends a message to all recipients in the recipient list. The return value of this method is the server-assigned identifier of the message. The maximum size of the message sent is 256 bytes.

Connected Event (SMPP Module)

This event is fired after a successful bind operation.

Syntax

Swift
Objective-C

func onConnected(statusCode: Int32, description: String)

- (void)onConnected:(int)statusCode :(NSString*)description;

Remarks

After establishing a socket connection to the SMPPServer, the class will attempt to send a bind as a transmitter command. Upon completion of this operation, the server will respond with either a success or failure state, which will be reflected in the Connected event's parameters.

StatusCode will contain the command status (error code) returned by the server. For a StatusCode of 0, Description will be OK. Otherwise, it will contain a standard interpretation of the error.

ConnectionStatus Event (SMPP Module)

This event is fired to indicate changes in the connection state.

Syntax

Swift
Objective-C

func onConnectionStatus(connectionEvent: String, statusCode: Int32, description: String)

- (void)onConnectionStatus:(NSString*)connectionEvent :(int)statusCode :(NSString*)description;

Remarks

The ConnectionStatus event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:


	Firewall connection complete.
	Secure Sockets Layer (SSL) or S/Shell handshake complete (where applicable).
	Remote host connection complete.
	Remote host disconnected.
	SSL or S/Shell connection broken.
	Firewall host disconnected.

StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

Disconnected Event (SMPP Module)

This event is fired when connection to the SMS service is lost.

Syntax

Swift
Objective-C

func onDisconnected(statusCode: Int32, description: String)

- (void)onDisconnected:(int)statusCode :(NSString*)description;

Remarks

After sending an unbind operation to the server, this event will be fired containing the results of that operation. This event may also be fired if the socket connection to the service is lost.

If the event was fired because of an unbind operation, StatusCode will contain the command status set by the server. Otherwise, it will contain the socket code for the type of disconnection. For a status code value of 0, Description will contain OK. Otherwise, it will contain a standard interpretation of the value in StatusCode.

Error Event (SMPP Module)

This event is fired when the server detects an error.

Syntax

Swift
Objective-C

func onError(errorCode: Int32, description: String)

- (void)onError:(int)errorCode :(NSString*)description;

Remarks

If the server sends an error not related to a command sent from the class, the class will fire an Error event containing information related to the error.

ErrorCode will contain the code sent by the server, and Description will contain a standard interpretation of that code.

MessageIn Event (SMPP Module)

This event is fired upon receipt of a message.

Syntax

Swift
Objective-C

func onMessageIn(sourceAddress: String, scheduleDeliveryTime: String, validityPeriod: String, message: String, messagePart: Int32, messagePartCount: Int32, messagePartReference: Int32, destinationAddress: String, responseErrorCode: inout Int32)

- (void)onMessageIn:(NSString*)sourceAddress :(NSString*)scheduleDeliveryTime :(NSString*)validityPeriod :(NSString*)message :(int)messagePart :(int)messagePartCount :(int)messagePartReference :(NSString*)destinationAddress :(int*)responseErrorCode;

Remarks

When a message is received, the SMPP class will parse the sender's message into the SourceAddress, ScheduleDeliveryTime, ValidityPeriod, and Message fields.

The SourceAddress parameter is the address of the originator of the message.

The DestinationAddress parameter holds the address of the recipient.

The ScheduleDeliveryTime parameter is the delivery time at which the short message is scheduled to be forwarded to another Message Center (MC). This will be an empty string if it is not scheduled.

The ValidityPeriod parameter is applicable only if this short message is being forwarded to another MC. When this occurs, it specifies how long the receiving MC should retain the Short Message (SM) and continue trying to deliver it. This will be an empty string if the current validity period is unavailable.

The Message parameter is the plaintext portion of the message body.

If the incoming message is a part of a larger message (the message was split up into several parts), the MessagePartCount, MessagePart, and MessagePartReference parameters will be set. MessagePartCount will hold the total number of parts for the message. MessagePart will indicate the current part's location in the message to determine the order when reassembling the message. This will be a value from 1 to MessagePartCount. MessagePartReference holds a reference value that will be the same across all parts for the message.

The ResponseErrorCode parameter may be set to return an error condition to the server. This corresponds to the command_status protocol-level field of the response.

MessageStatus Event (SMPP Module)

This event is fired upon receipt of a message.

Syntax

Swift
Objective-C

func onMessageStatus(messageId: String, messageState: Int32, messageError: Int32, finalDate: String)

- (void)onMessageStatus:(NSString*)messageId :(int)messageState :(int)messageError :(NSString*)finalDate;

Remarks

When a CheckMessageStatus is called, the SMPP class will fetch the status of the message represented by MessageId from the server, parse the response, and fire MessageStatus.

MessageState represents the last known state the message was left in on the SMPPServer. This code is version specific. For v3.4:


1	ENROUTE, the message is en route.
2	DELIVERED, the message is delivered.
3	EXPIRED, the message validity period expired.
4	DELETED, the message has been deleted.
5	UNDELIVERABLE, the message is undeliverable.
6	ACCEPTED, the message has been read on behalf of subscriber by customer service.
7	UNKNOWN, the message is in an invalid state.
8	REJECTED, the message is in a rejected state.

For v5.0:


0	SCHEDULED, the message is scheduled for delivery, but it has not yet been delivered.
1	ENROUTE, the message is en route.
2	DELIVERED, the message is delivered.
3	EXPIRED, the message validity period expired.
4	DELETED, the message has been deleted.
5	UNDELIVERABLE, the message is undeliverable.
6	ACCEPTED, the message has been read on behalf of subscriber by customer service.
7	UNKNOWN, the message is in an invalid state.
8	REJECTED, the message is in a rejected state.
9	SKIPPED, the message was accepted but not delivered.

MessageError will contain an error code representing any failure encountered during message delivery. This code may be vendor-specific.

FinalDate contains a human-readable string representing the date on which the message was delivered. If the message was not delivered, this parameter will be empty.

PITrail Event (SMPP Module)

This event is fired once for each protocol data unit (PDU) sent between the client and server.

Syntax

Swift
Objective-C

func onPITrail(direction: Int32, pdu: Data, commandLength: Int32, commandId: Int32, commandDescription: String, commandStatus: String, sequenceNumber: Int32)

- (void)onPITrail:(int)direction :(NSData*)PDU :(int)commandLength :(int)commandId :(NSString*)commandDescription :(NSString*)commandStatus :(int)sequenceNumber;

Remarks

Whenever either the class or the SMPPServer sends any data across the connection, the class will fire a PITrail event containing that data. It will usually be in SMPP-PDU format.

A PDU will contain at least the SMPP header, which is always 16 bytes long. The first four bytes represent the total length of the PDU, including the 16-byte header. The next four bytes are the command Id associated with the PDU. The command Id of a response PDU is always the command Id to which it is responding plus 0x80000000.

The class parses the values contained in the PDU header into the appropriate fields. The CommandLength, CommandId, CommandStatus, and SequenceNumber parameters contain these parsed values.

The third set of four bytes are the command status (status code) of the command. All originating commands will have a status code of 0x00000000, which will be ignored by the receiver. The field is only set in response PDUs to indicate the status of the originating command. The final four bytes represent the sequence number of the command. All response PDUs will contain the same sequence number as the originating command.

ReadyToSend Event (SMPP Module)

This event is fired when the component is ready to send data.

Syntax

Swift
Objective-C

func onReadyToSend()

- (void)onReadyToSend;

Remarks

The ReadyToSend event indicates that the underlying Transmission Control Protocol (TCP)/IP subsystem is ready to accept data after a failed DataToSend. This event also is fired immediately after a connection to the remote host is established.

SSLServerAuthentication Event (SMPP Module)

Fired after the server presents its certificate to the client.

Syntax

Swift
Objective-C

func onSSLServerAuthentication(certEncoded: Data, certSubject: String, certIssuer: String, status: String, accept: inout Bool)

- (void)onSSLServerAuthentication:(NSData*)certEncoded :(NSString*)certSubject :(NSString*)certIssuer :(NSString*)status :(int*)accept;

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (SMPP Module)

Fired when secure connection progress messages are available.

Syntax

Swift
Objective-C

func onSSLStatus(message: String)

- (void)onSSLStatus:(NSString*)message;

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

Firewall Type

The firewall the component will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall, such as the firewall and the .

Fields

autoDetect
Bool
Default Value: False

This property tells the class whether or not to automatically detect and use firewall system settings, if available.

firewallType
FirewallTypes
Default Value: 0

This property determines the type of firewall to connect through. The applicable values are as follows:


fwNone (0)	No firewall (default setting).
fwTunnel (1)	Connect through a tunneling proxy. is set to 80.
fwSOCKS4 (2)	Connect through a SOCKS4 Proxy. is set to 1080.
fwSOCKS5 (3)	Connect through a SOCKS5 Proxy. is set to 1080.
fwSOCKS4A (10)	Connect through a SOCKS4A Proxy. is set to 1080.

host
String
Default Value: ""

This property contains the name or IP address of firewall (optional). If a is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the class .

password
String
Default Value: ""

This property contains a password if authentication is to be used when connecting through the firewall. If is specified, the and properties are used to connect and authenticate to the given firewall. If the authentication fails, the class .

port
Int32
Default Value: 0

This property contains the transmission control protocol (TCP) port for the firewall . See the description of the property for details.

Note: This property is set automatically when is set to a valid value. See the description of the property for details.

user
String
Default Value: ""

This property contains a user name if authentication is to be used connecting through a firewall. If the is specified, this property and properties are used to connect and authenticate to the given Firewall. If the authentication fails, the class .

Constructors

public init()

SMPPRecipient Type

This type describes a recipient of the SMPP message.

Remarks

This type describes a recipient of the SMPP message that is being sent. The fields describe the of recipient and the of the recipient of the message.

Fields

address
String
Default Value: ""

This property contains the email address of a particular recipient. This can be used to set single or multiple recipients. The contains the corresponding type.

For a recipient type of normal, the value in the should be either the dotted IPv4 of an SMS-enabled device or the directory number of a target mobile phone. For distributed lists, the value should be the name of the list as it is stored on the SMPPServer.

recipientType
SMPPRecipientTypes
Default Value: 0

This property contains the type of a particular recipient. This property is used only for multiple recipient messages. The contains the corresponding recipient's address.

For a recipient type of normal, the value in should be either the dotted IPv4 of an SMS-enabled device or the directory number of a target mobile phone. For distributed lists, the value should be the name of the list as it is stored on the SMPPServer.

Valid values for RecipientType are as follows:


0 (smppRecipientTypeNormal)	Normal SME (Short Message Entity) Address
1 (smppRecipientTypeList)	Distribution List

Constructors

public init()

public init(address: )

Config Settings (SMPP Module)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

SMPP Config Settings

AddressRange: Specifies the addr_range parameter when binding.

The addr_range parameter is used when binding as a receiver or transceiver to specify a set of short message entity (SME) addresses serviced by the external SME (ESME) client. A single SME address may be specified in the address_range parameter. UNIX Regular Expression notation should be used to specify a range of addresses. Messages addressed to any destination in this range shall be routed to the ESME.

Note 1: For IP addresses, it is only possible to specify a single IP address. A range of IP addresses is not allowed. IP version 6.0 is not currently supported in this version of the protocol.

Note 2: It is likely that the addr_range field is not supported or deliberately ignored on most Message Centers (MCs). Most carriers will not allow an ESME to control the message routing because this can carry the risk of incorrectly routing messages. In such circumstances, the ESME will be requested to set the field to NULL.

BinaryDataCoding: Whether or not to binary encode the message when DataCoding is set.

By default, when the DataCoding configuration setting is used, the component will treat the message as binary. This configuration setting can be set to false to send the text user data instead.

BindAsReceiver: Causes the component to bind as a receiver.

This configuration setting will instruct the component to bind to the SMPP service as a receiver instead of a transceiver.

BindAsTransmitter: Causes the component to bind as a transmitter.

This configuration setting will instruct the component to bind to the SMPP service as a transmitter instead of a transceiver.

CustomTLV: Optional TLV parameters added after the mandatory parameters and before the payload.

The format of the tag length value (TLV) parameter is as follows:

One two-byte integer containing the parameter type (tag).
One two-byte integer indicating the length of the data contained in this parameter.
The variable-length parameter data itself.

All of these values must be hex-encoded before setting the CustomTLV configuration setting.

For instance, to add a gn_lookup_userdata parameter, the type/tag is decimal 5633 (that's 0x1601 in hex), and the data in this example is "Hello World", which is 11 characters in length. So the TLV is as follows: 5633 + 11 + "Hello World", or 0x16 0x01 0x00 0x0b and then the ASCII text "Hello World". When hex-encoded, this yields the string "1601000b48656c6c6f20576f726c64". This is the value you would then use to set the CustomTLV configuration setting. You are not restricted to only one optional parameter. Multiple TLV parameters may be concatenated together.

Note: This is advanced functionality, and the class does not verify the data in this configuration setting before transmission. After the class internally decodes the string back into binary, it is passed on inside the protocol data unit (PDU) as-is without validation or modification.

This configuration setting is applicable only when using the SendMessage or SendData methods.

DataCoding: The data encoding mechanism to be used for the current message.

This configuration setting informs the message recipient about how data were encoded. The possible values are as follows:


0	MC Specific encoding
1	IA5 (CCITT T.50)/ASCII (ANSI X3.4)
2	Octet unspecified (8-bit binary)
3	Latin 1 (ISO-8859-1)
4	Octet unspecified (8-bit binary)
5	JIS (X 0208-1990)
6	Cyrillic (ISO-8859-5)
7	Latin/Hebrew (ISO-8859-8)
8	UCS2 (ISO/IEC-10646)
9	Pictogram Encoding
10	ISO-2022-JP (Music Codes)
11	Reserved
12	Reserved 2
13	Extended Kanji JIS (X 0212-1990)
14	KS C 5601

DecodeHexStrings: Will decode an ascii hex-representation of binary data prior to transmission.

When this configuration setting is True, data sent in the SendCommand method's Payload parameter, SendData method's Data parameter, or SendMessage method's Message parameter will be treated as an ASCII hex-representation of binary data, and will be decoded into raw binary before transmission. For instance, the string "48656C6C6F20576F726C64" will be decoded to "Hello World" when this configuration setting is True. If the string passed to the method parameter is not correctly hex-encoded, the class will transmit unexpected results. This setting is False by default.

DestinationNPI: The Number Planning Indicator for the destination ESME.

When sending messages, this configuration setting is used to indicate the numbering plan the destination ESME. For a list of possible values, please see SourceNPI.

DestinationTON: The Type of Number for the destination ESME.

When sending messages, this configuration setting is used to indicate the Type of Number for the destination ESME. For a list of possible values, please see SourceTON.

DoSplitLargeMessages: Splits long messages and returns the UDH and Message Parts.

This configuration setting accepts a string that will be the long message to be split into parts. The user data header (UDH) and Message Parts will be returned in hex, in the following format:

[UDH1],[MessagePart1];[UDH2],[MessagePart2];[UDH3],[MessagePart3]

HexString: A hex-encoded binary string to be sent to the current recipient.

When set, this configuration setting will cause the component to internally call SendMessage with the binary contents of the hex-encoded string. The return value when setting this property is the server-assigned Id of the message. Querying this property will result in an empty string.

Note: When using HexString, DataCoding must be set to 8, and the value provided to this configuration setting should be the UTF-16 hex-encoded message.

IncomingDestinationAddress: Returns the dest_addr field inside the received message.

This configuration setting is read-only, and it is valid only inside the MessageIn event.

IntermediateNotification: Causes the component to request intermediate notification.

This configuration setting will request intermediate notification. By default, intermediate notification is not requested.

MaxCIMDSMSLength: Indicates the maximum SMS message length for the CIMD protocol.

This configuration setting is applicable only when SplitLargeMessages is True and Protocol is set to CIMD2. The configuration setting controls the maximum size of SMS messages before they are split and has a default value of 160.

MaxSMSLength: Indicates the maximum SMS message length.

This configuration setting is applicable only when SplitLargeMessages is True. The setting controls the maximum size of SMS messages before they are split and has a default value of 140.

MCReceipt: The Type of MC Delivery Receipt requested.

When sending a message, this configuration setting is used to determine whether or not an MC delivery receipt is requested. This value is 0 by default, and no receipt is requested. The possible values are as follows:


0	No MC Delivery Receipt requested (default).
1	MC Delivery Receipt is requested after final delivery (success or failure).
2	MC Delivery Receipt is requested after a failed delivery.
3	MC Delivery Receipt is requested after a successful delivery.

MessageInReceiptedMessageId: The receipted_message_id field of an incoming deliver_sm PDU.

This configuration setting indicates the Id of the message being receipted in an MC delivery receipt.

Note: This is applicable only within the MessageIn event.

MessageMode: The Type of Messaging Mode requested.

When sending a message, this configuration setting is used to specify the Messaging Mode in the outgoing request. For incoming messages, this value can be queried from within the MessageIn event. The possible values are as follows:


0	Default SMSC Mode (e.g., Store and Forward).
1	Datagram mode.
2	Forward (i.e., Transaction) mode.
3	Store and Forward mode.

MessageType: The Type of Message.

When sending a message, this configuration setting is used to specify the Message Type in the outgoing request. For incoming messages, this value can be queried from within the MessageIn event. The possible values are as follows:


0	Default message Type (i.e., normal message).
1	Short Message contains MC Delivery Receipt.
2	Short Message contains Intermediate Delivery Notification.

PDUFormat: The format of the PDU.

Decides the format of the PDU parameter when decoding a PDU for the PITrail event. When set to Hex (1), the PDU will be encoded as a hex string. When set to Verbose (2) the PDU will be a longer hex dump.


0	Raw (Default)
1	Hex string
2	Verbose

ProtocolId: The protocol identifier.

This configuration setting allows control of the protocol identifier field value used in the outgoing messages.

ReplaceIfPresent: Indicates whether the replace_if_present_flag is enabled when sending a message.

This configuration indicates whether the replace_if_present_flag is enabled when sending a message. By default, this value is False, and the flag is disabled. When enabled (True), this indicates to the SMSC that the user wishes to replace a previously submitted message that is still pending delivery. If the previous message is still pending delivery, the new message will replace it. If the previous message has already been delivered or does not exist, the new message will also be delivered.

SMEAcknowledgement: The Type of SME originated acknowledgement requested.

When sending a message, this configuration setting is used to determine whether or not an SME acknowledgment is requested. This value is 0 by default, and no acknowledgment is requested. The possible values are as follows:


0	No SME acknowledgment requested (default).
1	SME delivery acknowledgment is requested.
2	SME manual/user acknowledgment is requested.
3	Both delivery and manual/user acknowledgment is requested.

SourceNPI: The Number Planning Indicator for the ESME.

When binding, this configuration setting is used to specify the numbering plan of the ESME. Mobiles tend to set this value to 1. Because most ESMEs are mobiles, the default value for SourceNPI is 1. The possible value are as follows:


Unknown (0)
ISDN (1)
Data (3)
Telex (4)
LandMobile (6)
National (8)
Private (9)
ERMES (10)
Internet (14)
WAP (18)

SourceTON: The Type of Number for the ESME.

When binding, this configuration setting is used to indicate the Type of Number for the ESME address. The possible values are as follows:


Unknown (0)	The number type is unknown
International (1)	The number includes the international trunk prefix
National (2)	The number includes the national trunk prefix
NetworkSpecific (3)	The number exists on a network that uses a specific delivery protocol
SubscriberNumber (4)	The number is just the subscriber number, without prefixes
Alphanumeric (5)	The address is human-readable (contains letters and digits)
Abbreviated (6)	The number is abbreviated

SplitLargeMessages: Determines whether large messages are split into multiple parts.

The default value is False. If set to true and the message is larger than MaxSMSLength (or MaxCIMDSMSLength), the message will automatically be split into parts when SendMessage is called.

Note: This is valid only for GSM networks.

When receiving a message that has been split, the MessageIn event provides parameters to reassemble the message.

SplitMessageMethod: Determines how large messages are split into multiple parts.

The component can split large messages using either the UDH or segmentation and reassembly (SAR) method. The mode used is determined by this configuration setting. The possible values are as follows:


0	UDH (Default)
1	SAR

StatusReportRequest: Defines in what cases a status report is created by the server.

This configuration setting is applicable only when Protocol is set to smppCIMD2. This may be set to request that the server create a status report for the given conditions. The assigned value should be the sum of all desired conditions. For instance, a value of 62 means that a report should be created for all events except for a temporary error. Possible flags are as follows:


1	Temporary Error
2	Validity Period Expired
4	Delivery Failed
8	Delivery Successful
16	Message Cancelled
32	Message Deleted By The Operator

SubAddr: Defines a unique index for application instance.

This configuration setting is useful for correct delivery of status reports when multiple instances of the same application are connected.

This configuration setting is applicable only when Protocol is set to smppCIMD2.

SynchronousSendCommand: Controls whether SendCommand behaves synchronously or asynchronously.

The default value is True, which means SendCommand will not return until a response has been received. If set to False, the class returns and does not wait for a response from the server.

SynchronousSendMessage: Controls whether SendMessage behaves synchronously or asynchronously.

The default value is True, which means SendMessage will not return until a response has been received. If set to False, the class returns the sequence number used and does not wait for a response from the server. You may then monitor the PITrail event to match the response from the server to the sent message.

UseGSM7BitEncoding: Whether or not to use GSM 7-bit encoding.

When set to True (False by default), this will instruct the component to use 7-bit GSM encoding.

UseGSM7bitEncodingCompression: Whether to compress GSM 7-bit encoded characters.

When set to True (True by default), the component will compress GSM 7-bit encoded characters. Some devices do not support compression. Setting this to False may allow them to be displayed.

This configuration setting applies only when UseGSM7BitEncoding is True.

WaitForBanner: Specifies the CIMD2 banner the class will wait for when connecting.

This configuration setting is applicable only when Protocol is set to smppCIMD2. If set, the class will wait for a banner containing this string to be returned by the server before proceeding with the connection.

TCPClient Config Settings

ConnectionTimeout: Sets a separate timeout value for establishing a connection.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the class will use Timeout for establishing a connection and transmitting/receiving data.

FirewallAutoDetect: Tells the class whether or not to automatically detect and use firewall system settings, if available.

This configuration setting is provided for use by classs that do not directly expose Firewall properties.

FirewallHost: Name or IP address of firewall (optional).

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallPassword: Password to be used if authentication is to be used when connecting through the firewall.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the class .

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallPort: The TCP port for the FirewallHost;.

The FirewallPort is set automatically when FirewallType is set to a valid value.

Note: This configuration setting is provided for use by classs that do not directly expose Firewall properties.

FirewallType: Determines the type of firewall to connect through.

The appropriate values are as follows:


0	No firewall (default setting).
1	Connect through a tunneling proxy. FirewallPort is set to 80.
2	Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
3	Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
10	Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallUser: A user name if authentication is to be used connecting through a firewall.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the class .

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

KeepAliveInterval: The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

When set, TCPKeepAlive will automatically be set to True. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in macOS.

KeepAliveTime: The inactivity time in milliseconds before a TCP keep-alive packet is sent.

When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Linger: When set to True, connections are terminated gracefully.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.

In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the class returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.

LingerTime: Time in seconds to have the connection linger.

LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout.

LocalHost: The name of the local host through which connections are initiated or accepted.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

If the class is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

LocalPort: The port in the local host where the class binds.

This must be set before a connection is attempted. It instructs the class to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength: The maximum amount of data to accumulate when no EOL is found.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.

MaxTransferRate: The transfer rate limit in bytes per second.

This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit.

ProxyExceptionsList: A semicolon separated list of hosts and IPs to bypass when using a proxy.

This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use. When requests are made to hosts specified in this property, the proxy will not be used. For instance:

www.google.com;www.nsoftware.com

TCPKeepAlive: Determines whether or not the keep alive socket option is enabled.

If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

TcpNoDelay: Whether or not to delay when sending packets.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

UseIPv6: Whether to use IPv6.

When set to 0 (default), the class will use IPv4 exclusively. When set to 1, the class will use IPv6 exclusively. To instruct the class to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are:


0	IPv4 Only
1	IPv6 Only
2	IPv6 with IPv4 fallback

SSL Config Settings

LogSSLPackets: Controls whether SSL packets are logged when using the internal security API.

When SSLProvider is set to Internal, this setting controls whether SSL packets should be logged. By default, this setting is False, as it is only useful for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this setting has no effect if SSLProvider is set to Platform.

OpenSSLCADir: The path to a directory containing CA certificates.

This functionality is available only when the provider is OpenSSL.

The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g. 9d66eef0.0, 9d66eef0.1 etc). OpenSSL recommends to use the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCAFile: Name of the file containing the list of CA's trusted by your application.

This functionality is available only when the provider is OpenSSL.

The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by

-----BEGIN CERTIFICATE-----

... (CA certificate in base64 encoding) ...

-----END CERTIFICATE-----

sequences. Before, between, and after the certificates text is allowed which can be used e.g. for descriptions of the certificates. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCipherList: A string that controls the ciphers to be used by SSL.

This functionality is available only when the provider is OpenSSL.

The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".

OpenSSLPrngSeedData: The data to seed the pseudo random number generator (PRNG).

This functionality is available only when the provider is OpenSSL.

By default OpenSSL uses the device file "/dev/urandom" to seed the PRNG and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.

ReuseSSLSession: Determines if the SSL session is reused.

If set to true, the class will reuse the context if and only if the following criteria are met:

The target host name is the same.
The system cache entry has not expired (default timeout is 10 hours).
The application process that calls the function is the same.
The logon session is the same.
The instance of the class is the same.

SSLCACerts: A newline separated list of CA certificate to use during SSL client authentication.

This setting specifies one or more CA certificates to be included in the request when performing SSL client authentication. Some servers require the entire chain, including CA certificates, to be presented when performing SSL client authentication. The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLCheckCRL: Whether to check the Certificate Revocation List for the server certificate.

This setting specifies whether the class will check the Certificate Revocation List specified by the server certificate. If set to 1 or 2, the class will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The class will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the class .

When set to 0 (default) the CRL check will not be performed by the class. When set to 1, it will attempt to perform the CRL check, but will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

SSLCheckOCSP: Whether to use OCSP to check the status of the server certificate.

This setting specifies whether the class will use OCSP to check the validity of the server certificate. If set to 1 or 2, the class will first obtain the OCSP URL from the server certificate's OCSP extension. The class will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the class .

When set to 0 (default) the class will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

SSLCipherStrength: The minimum cipher strength used for bulk encryption.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting.

SSLEnabledCipherSuites: The cipher suite to be used in an SSL negotiation.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the class will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when SSLProvider is set to Platform: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=CALG_AES_256"); obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES"); Possible values when SSLProvider is set to Platform include:

CALG_3DES
CALG_3DES_112
CALG_AES
CALG_AES_128
CALG_AES_192
CALG_AES_256
CALG_AGREEDKEY_ANY
CALG_CYLINK_MEK
CALG_DES
CALG_DESX
CALG_DH_EPHEM
CALG_DH_SF
CALG_DSS_SIGN
CALG_ECDH
CALG_ECDH_EPHEM
CALG_ECDSA
CALG_ECMQV
CALG_HASH_REPLACE_OWF
CALG_HUGHES_MD5
CALG_HMAC
CALG_KEA_KEYX
CALG_MAC
CALG_MD2
CALG_MD4
CALG_MD5
CALG_NO_SIGN
CALG_OID_INFO_CNG_ONLY
CALG_OID_INFO_PARAMETERS
CALG_PCT1_MASTER
CALG_RC2
CALG_RC4
CALG_RC5
CALG_RSA_KEYX
CALG_RSA_SIGN
CALG_SCHANNEL_ENC_KEY
CALG_SCHANNEL_MAC_KEY
CALG_SCHANNEL_MASTER_HASH
CALG_SEAL
CALG_SHA
CALG_SHA1
CALG_SHA_256
CALG_SHA_384
CALG_SHA_512
CALG_SKIPJACK
CALG_SSL2_MASTER
CALG_SSL3_MASTER
CALG_SSL3_SHAMD5
CALG_TEK
CALG_TLS1_MASTER
CALG_TLS1PRF

Example values when SSLProvider is set to Internal:

obj.config("SSLEnabledCipherSuites=*");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_DH_ANON_WITH_AES_128_CBC_SHA");

Possible values when SSLProvider is set to Internal include:

TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_128_GCM_SHA256
TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
TLS_DH_RSA_WITH_AES_128_GCM_SHA256 (Not Recommended)
TLS_DH_RSA_WITH_AES_256_GCM_SHA384 (Not Recommended)
TLS_DH_DSS_WITH_AES_128_GCM_SHA256 (Not Recommended)
TLS_DH_DSS_WITH_AES_256_GCM_SHA384 (Not Recommended)
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA256
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
TLS_DHE_RSA_WITH_AES_256_CBC_SHA
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
TLS_DHE_DSS_WITH_AES_256_CBC_SHA
TLS_RSA_WITH_AES_128_CBC_SHA
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_DSS_WITH_AES_128_CBC_SHA
TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_DES_CBC_SHA
TLS_DHE_RSA_WITH_DES_CBC_SHA
TLS_DHE_DSS_WITH_DES_CBC_SHA
TLS_RSA_WITH_RC4_128_MD5
TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols) only the following cipher suites are supported:

TLS_AES_256_GCM_SHA384
TLS_CHACHA20_POLY1305_SHA256
TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols: Used to enable/disable the supported security protocols.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:


TLS1.3	12288 (Hex 3000)
TLS1.2	3072 (Hex C00) (Default)
TLS1.1	768 (Hex 300) (Default)
TLS1	192 (Hex C0) (Default)
SSL3	48 (Hex 30) [Platform Only]
SSL2	12 (Hex 0C) [Platform Only]

SSLEnabledProtocols - TLS 1.3 Notes

By default when TLS 1.3 is enabled the class will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions.

In editions which are designed to run on Windows SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is only supported on Windows 11 / Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.

If set to 1 (Platform provider) please be aware of the following notes:

The platform provider is only available on Windows 11 / Windows Server 2022 and up.
SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2 the above restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.

SSLEnabledProtocols: SSL2 and SSL3 Notes:

SSL 2.0 and 3.0 are not supported by the class when the SSLProvider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and SSLProvider needs to be set to platform.

SSLEnableRenegotiation: Whether the renegotiation_info SSL extension is supported.

This setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This setting is by default, but can be set to to disable the extension.

This setting is only applicable when SSLProvider is set to Internal.

SSLIncludeCertChain: Whether the entire certificate chain is included in the SSLServerAuthentication event.

This setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

SSLKeyLogFile: The location of a file where per-session secrets are written for debugging purposes.

This setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the class will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffice for debugging purposes. When writing to this file the class will only append, it will not overwrite previous values.

Note: This setting is only applicable when SSLProvider is set to Internal.

SSLNegotiatedCipher: Returns the negotiated cipher suite.

Returns the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

SSLNegotiatedCipherStrength: Returns the negotiated cipher suite strength.

Returns the strength of the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g.TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

SSLNegotiatedCipherSuite: Returns the negotiated cipher suite.

Returns the cipher suite negotiated during the SSL handshake represented as a single string.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherSuite[connId]");

SSLNegotiatedKeyExchange: Returns the negotiated key exchange algorithm.

Returns the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchange[connId]");

SSLNegotiatedKeyExchangeStrength: Returns the negotiated key exchange algorithm strength.

Returns the strenghth of the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchangeStrength[connId]");

SSLNegotiatedVersion: Returns the negotiated protocol version.

Returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

SSLSecurityFlags: Flags that control certificate verification.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:


0x00000001	Ignore time validity status of certificate.
0x00000002	Ignore time validity status of CTL.
0x00000004	Ignore non-nested certificate times.
0x00000010	Allow unknown Certificate Authority.
0x00000020	Ignore wrong certificate usage.
0x00000100	Ignore unknown certificate revocation status.
0x00000200	Ignore unknown CTL signer revocation status.
0x00000400	Ignore unknown Certificate Authority revocation status.
0x00000800	Ignore unknown Root revocation status.
0x00008000	Allow test Root certificate.
0x00004000	Trust test Root certificate.
0x80000000	Ignore non-matching CN (certificate CN not-matching server name).

This functionality is currently not available when the provider is OpenSSL.

SSLServerCACerts: A newline separated list of CA certificate to use during SSL server certificate validation.

This setting optionally specifies one or more CA certificates to be used when verifying the server certificate. When verifying the server's certificate the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This setting should only be set if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

TLS12SignatureAlgorithms: Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.

This setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the class will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the class .

The format of this value is a comma separated list of hash-signature combinations. For instance: component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups: The supported groups for ECC.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)

TLS13KeyShareGroups: The groups for which to pregenerate key shares.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448"
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1"
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096"
"ffdhe_6144"
"ffdhe_8192"

TLS13SignatureAlgorithms: The allowed certificate signature algorithms.

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

"ed25519" (default)
"ed448" (default)
"ecdsa_secp256r1_sha256" (default)
"ecdsa_secp384r1_sha384" (default)
"ecdsa_secp521r1_sha512" (default)
"rsa_pkcs1_sha256" (default)
"rsa_pkcs1_sha384" (default)
"rsa_pkcs1_sha512" (default)
"rsa_pss_sha256" (default)
"rsa_pss_sha384" (default)
"rsa_pss_sha512" (default)

The default value is rsa_pss_sha256,rsa_pss_sha384,rsa_pss_sha512,rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512,ecdsa_secp256r1_sha256,ecdsa_secp384r1_sha384,ecdsa_secp521r1_sha512,ed25519,ed448. This setting is only applicable when SSLEnabledProtocols includes TLS 1.3.

TLS13SupportedGroups: The supported groups for (EC)DHE key exchange.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448" (default)
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096" (default)
"ffdhe_6144" (default)
"ffdhe_8192" (default)

Socket Config Settings

AbsoluteTimeout: Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for UDP ports.

FirewallData: Used to send extra data to the firewall.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes).

InBufferSize: The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize: The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

Base Config Settings

BuildInfo: Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

CodePage: The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:


Identifier	Name
037	IBM EBCDIC - U.S./Canada
437	OEM - United States
500	IBM EBCDIC - International
708	Arabic - ASMO 708
709	Arabic - ASMO 449+, BCON V4
710	Arabic - Transparent Arabic
720	Arabic - Transparent ASMO
737	OEM - Greek (formerly 437G)
775	OEM - Baltic
850	OEM - Multilingual Latin I
852	OEM - Latin II
855	OEM - Cyrillic (primarily Russian)
857	OEM - Turkish
858	OEM - Multilingual Latin I + Euro symbol
860	OEM - Portuguese
861	OEM - Icelandic
862	OEM - Hebrew
863	OEM - Canadian-French
864	OEM - Arabic
865	OEM - Nordic
866	OEM - Russian
869	OEM - Modern Greek
870	IBM EBCDIC - Multilingual/ROECE (Latin-2)
874	ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875	IBM EBCDIC - Modern Greek
932	ANSI/OEM - Japanese, Shift-JIS
936	ANSI/OEM - Simplified Chinese (PRC, Singapore)
949	ANSI/OEM - Korean (Unified Hangul Code)
950	ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026	IBM EBCDIC - Turkish (Latin-5)
1047	IBM EBCDIC - Latin 1/Open System
1140	IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141	IBM EBCDIC - Germany (20273 + Euro symbol)
1142	IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143	IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144	IBM EBCDIC - Italy (20280 + Euro symbol)
1145	IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146	IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147	IBM EBCDIC - France (20297 + Euro symbol)
1148	IBM EBCDIC - International (500 + Euro symbol)
1149	IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200	Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201	Unicode UCS-2 Big-Endian
1250	ANSI - Central European
1251	ANSI - Cyrillic
1252	ANSI - Latin I
1253	ANSI - Greek
1254	ANSI - Turkish
1255	ANSI - Hebrew
1256	ANSI - Arabic
1257	ANSI - Baltic
1258	ANSI/OEM - Vietnamese
1361	Korean (Johab)
10000	MAC - Roman
10001	MAC - Japanese
10002	MAC - Traditional Chinese (Big5)
10003	MAC - Korean
10004	MAC - Arabic
10005	MAC - Hebrew
10006	MAC - Greek I
10007	MAC - Cyrillic
10008	MAC - Simplified Chinese (GB 2312)
10010	MAC - Romania
10017	MAC - Ukraine
10021	MAC - Thai
10029	MAC - Latin II
10079	MAC - Icelandic
10081	MAC - Turkish
10082	MAC - Croatia
12000	Unicode UCS-4 Little-Endian
12001	Unicode UCS-4 Big-Endian
20000	CNS - Taiwan
20001	TCA - Taiwan
20002	Eten - Taiwan
20003	IBM5550 - Taiwan
20004	TeleText - Taiwan
20005	Wang - Taiwan
20105	IA5 IRV International Alphabet No. 5 (7-bit)
20106	IA5 German (7-bit)
20107	IA5 Swedish (7-bit)
20108	IA5 Norwegian (7-bit)
20127	US-ASCII (7-bit)
20261	T.61
20269	ISO 6937 Non-Spacing Accent
20273	IBM EBCDIC - Germany
20277	IBM EBCDIC - Denmark/Norway
20278	IBM EBCDIC - Finland/Sweden
20280	IBM EBCDIC - Italy
20284	IBM EBCDIC - Latin America/Spain
20285	IBM EBCDIC - United Kingdom
20290	IBM EBCDIC - Japanese Katakana Extended
20297	IBM EBCDIC - France
20420	IBM EBCDIC - Arabic
20423	IBM EBCDIC - Greek
20424	IBM EBCDIC - Hebrew
20833	IBM EBCDIC - Korean Extended
20838	IBM EBCDIC - Thai
20866	Russian - KOI8-R
20871	IBM EBCDIC - Icelandic
20880	IBM EBCDIC - Cyrillic (Russian)
20905	IBM EBCDIC - Turkish
20924	IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932	JIS X 0208-1990 & 0121-1990
20936	Simplified Chinese (GB2312)
21025	IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027	Extended Alpha Lowercase
21866	Ukrainian (KOI8-U)
28591	ISO 8859-1 Latin I
28592	ISO 8859-2 Central Europe
28593	ISO 8859-3 Latin 3
28594	ISO 8859-4 Baltic
28595	ISO 8859-5 Cyrillic
28596	ISO 8859-6 Arabic
28597	ISO 8859-7 Greek
28598	ISO 8859-8 Hebrew
28599	ISO 8859-9 Latin 5
28605	ISO 8859-15 Latin 9
29001	Europa 3
38598	ISO 8859-8 Hebrew
50220	ISO 2022 Japanese with no halfwidth Katakana
50221	ISO 2022 Japanese with halfwidth Katakana
50222	ISO 2022 Japanese JIS X 0201-1989
50225	ISO 2022 Korean
50227	ISO 2022 Simplified Chinese
50229	ISO 2022 Traditional Chinese
50930	Japanese (Katakana) Extended
50931	US/Canada and Japanese
50933	Korean Extended and Korean
50935	Simplified Chinese Extended and Simplified Chinese
50936	Simplified Chinese
50937	US/Canada and Traditional Chinese
50939	Japanese (Latin) Extended and Japanese
51932	EUC - Japanese
51936	EUC - Simplified Chinese
51949	EUC - Korean
51950	EUC - Traditional Chinese
52936	HZ-GB2312 Simplified Chinese
54936	Windows XP: GB18030 Simplified Chinese (4 Byte)
57002	ISCII Devanagari
57003	ISCII Bengali
57004	ISCII Tamil
57005	ISCII Telugu
57006	ISCII Assamese
57007	ISCII Oriya
57008	ISCII Kannada
57009	ISCII Malayalam
57010	ISCII Gujarati
57011	ISCII Punjabi
65000	Unicode UTF-7
65001	Unicode UTF-8

The following is a list of valid code page identifiers for Mac OS only:


Identifier	Name
1	ASCII
2	NEXTSTEP
3	JapaneseEUC
4	UTF8
5	ISOLatin1
6	Symbol
7	NonLossyASCII
8	ShiftJIS
9	ISOLatin2
10	Unicode
11	WindowsCP1251
12	WindowsCP1252
13	WindowsCP1253
14	WindowsCP1254
15	WindowsCP1250
21	ISO2022JP
30	MacOSRoman
10	UTF16String
0x90000100	UTF16BigEndian
0x94000100	UTF16LittleEndian
0x8c000100	UTF32String
0x98000100	UTF32BigEndian
0x9c000100	UTF32LittleEndian
65536	Proprietary

LicenseInfo: Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a class is using. It will return the following information:

Product: The product the license is for.
Product Key: The key the license was generated from.
License Source: Where the license was found (e.g., RuntimeLicense, License File).
License Type: The type of license installed (e.g., Royalty Free, Single Server).
Last Valid Build: The last valid build number for which the license will work.

MaskSensitive: Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to to mask sensitive data. The default is .

This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseInternalSecurityAPI: Whether or not to use the system security libraries or an internal implementation.

When set to , the class will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to tells the class to use the internal implementation instead of using the system security libraries.

This setting is set to by default on all platforms.

Trappable Errors (SMPP Module)

SMPP Errors


	620 SMPP protocol error
	621 You cannot change this property while connected
	622 Server disconnected before responding
	623 Field value out of range
	624 Unsupported SMPP version
	625 Message parameter too long

TCPClient Errors


	100 You cannot change the RemotePort at this time. A connection is in progress.
	101 You cannot change the RemoteHost (Server) at this time. A connection is in progress.
	102 The RemoteHost address is invalid (0.0.0.0).
	104 Already connected. If you want to reconnect, close the current connection first.
	106 You cannot change the LocalPort at this time. A connection is in progress.
	107 You cannot change the LocalHost at this time. A connection is in progress.
	112 You cannot change MaxLineLength at this time. A connection is in progress.
	116 RemotePort cannot be zero. Please specify a valid service port number.
	117 You cannot change the UseConnection option while the class is active.
	135 Operation would block.
	201 Timeout.
	211 Action impossible in control's present state.
	212 Action impossible while not connected.
	213 Action impossible while listening.
	301 Timeout.
	302 Could not open file.
	434 Unable to convert string to selected CodePage.
	1105 Already connecting. If you want to reconnect, close the current connection first.
	1117 You need to connect first.
	1119 You cannot change the LocalHost at this time. A connection is in progress.
	1120 Connection dropped by remote host.

SSL Errors


	270 Cannot load specified security library.
	271 Cannot open certificate store.
	272 Cannot find specified certificate.
	273 Cannot acquire security credentials.
	274 Cannot find certificate chain.
	275 Cannot verify certificate chain.
	276 Error during handshake.
	280 Error verifying certificate.
	281 Could not find client certificate.
	282 Could not find server certificate.
	283 Error encrypting data.
	284 Error decrypting data.

TCP/IP Errors


	10004 [10004] Interrupted system call.
	10009 [10009] Bad file number.
	10013 [10013] Access denied.
	10014 [10014] Bad address.
	10022 [10022] Invalid argument.
	10024 [10024] Too many open files.
	10035 [10035] Operation would block.
	10036 [10036] Operation now in progress.
	10037 [10037] Operation already in progress.
	10038 [10038] Socket operation on non-socket.
	10039 [10039] Destination address required.
	10040 [10040] Message too long.
	10041 [10041] Protocol wrong type for socket.
	10042 [10042] Bad protocol option.
	10043 [10043] Protocol not supported.
	10044 [10044] Socket type not supported.
	10045 [10045] Operation not supported on socket.
	10046 [10046] Protocol family not supported.
	10047 [10047] Address family not supported by protocol family.
	10048 [10048] Address already in use.
	10049 [10049] Can't assign requested address.
	10050 [10050] Network is down.
	10051 [10051] Network is unreachable.
	10052 [10052] Net dropped connection or reset.
	10053 [10053] Software caused connection abort.
	10054 [10054] Connection reset by peer.
	10055 [10055] No buffer space available.
	10056 [10056] Socket is already connected.
	10057 [10057] Socket is not connected.
	10058 [10058] Can't send after socket shutdown.
	10059 [10059] Too many references, can't splice.
	10060 [10060] Connection timed out.
	10061 [10061] Connection refused.
	10062 [10062] Too many levels of symbolic links.
	10063 [10063] File name too long.
	10064 [10064] Host is down.
	10065 [10065] No route to host.
	10066 [10066] Directory not empty
	10067 [10067] Too many processes.
	10068 [10068] Too many users.
	10069 [10069] Disc Quota Exceeded.
	10070 [10070] Stale NFS file handle.
	10071 [10071] Too many levels of remote in path.
	10091 [10091] Network subsystem is unavailable.
	10092 [10092] WINSOCK DLL Version out of range.
	10093 [10093] Winsock not loaded yet.
	11001 [11001] Host not found.
	11002 [11002] Non-authoritative 'Host not found' (try again or check DNS setup).
	11003 [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP.
	11004 [11004] Valid name, no data record (check DNS setup).