Telnet Component

Properties Methods Events Config Settings Errors

The Telnet Component is used to communicate with servers implementing the TELNET protocol.

Syntax

TipwTelnet

Remarks

The Telnet Component supports both plaintext and Secure Sockets Layer/Transport Layer Security (SSL/TLS) connections. When connecting over Secure Sockets Layer/Transport Layer Security (SSL/TLS) the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL-related settings are also supported through the Config method.

The Telnet Component provides a simple interface to Telnet communications as specified by RFC 854. It allows sending of Telnet command codes to remote Telnet servers, and it scans the input data for Telnet commands. Appropriate events are fired for received commands.

The connection interface is very similar to that of TCPClient. The same properties and events are used for sending and receiving normal data, and the same property set is used to set properties of the connection. The Telnet Component adds a number of methods like SendCommand, SendDoOption, and others that allow for sending of Telnet commands to the other end. The respective events (e.g., Command, Do) are fired when the corresponding Telnet commands are received.

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.


AcceptData	This property indicates whether data reception is currently enabled.
BytesSent	This property includes the number of bytes actually sent after a call to the SendBytes method.
Connected	This property indicates whether the component is connected.
Firewall	A set of properties related to firewall access.
KeepAlive	When True, KEEPALIVE packets are enabled (for long connections).
Linger	When set to True, this property ensures that connections are terminated gracefully.
LocalHost	The name of the local host or user-assigned IP interface through which connections are initiated or accepted.
LocalPort	This property includes the Transmission Control Protocol (TCP) port in the local host where the TCPClient binds.
RemoteHost	This property includes the address of the remote host. Domain names are resolved to IP addresses.
RemotePort	This property includes the secure Telnet port in the remote host (default is 23).
SSLAcceptServerCert	Instructs the component to unconditionally accept the server certificate that matches the supplied certificate.
SSLCert	The certificate to be used during Secure Sockets Layer (SSL) negotiation.
SSLEnabled	This property indicates whether Transport Layer Security/Secure Sockets Layer (TLS/SSL) is enabled.
SSLProvider	The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.
SSLServerCert	The server certificate for the last established connection.
SSLStartMode	This property determines how the component starts the Secure Sockets Layer (SSL) negotiation.
Timeout	This property specifies the timeout for the component.
Transparent	When this property is True, Telnet command processing is disabled.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.


Config	Sets or retrieves a configuration setting.
Connect	This method connects to a remote host.
ConnectTo	This method connects to a remote host.
Disconnect	This method disconnects from the remote host.
DoEvents	This method processes events from the internal message queue.
PauseData	This method pauses data reception.
ProcessData	This method reenables data reception after a call to PauseData .
Reset	This method will reset the component.
Send	This method sends binary data to the remote host.
SendBytes	This method sends binary data to the remote host.
SendCommand	This method sends a single-character Telnet command code to the server.
SendDontOption	This method sends a single-character Telnet option code to the server with the Telnet DONT command.
SendDoOption	This method sends a single-character Telnet option code to the server with the Telnet DO command.
SendDoSubOption	This methods sends a Telnet SubOption to send to the server with the SubOption command.
SendText	This method sends text to the remote host.
SendUrgentBytes	This method urgently sends binary data to the remote host.
SendUrgentText	This method urgently sends text to the remote host.
SendWillOption	This method sends a single-character Telnet option code the server with the Telnet WILL command.
SendWontOption	This method sends a single-character Telnet option code to the server with the Telnet WONT command.

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.


Command	This event is fired when a Telnet command comes from the Telnet server.
Connected	Fired immediately after a connection completes (or fails).
ConnectionStatus	Fired to indicate changes in the connection state.
DataIn	This event is fired when data are received from the remote host.
Disconnected	Fired when a connection is closed.
Do	This event is fired when a Telnet DO OPTION command comes from the Telnet server.
Dont	This event is fired when a Telnet DONT OPTION command comes from the Telnet server.
Error	Fired when information is available about errors during data delivery.
ReadyToSend	This event is fired when the component is ready to send data.
SSLServerAuthentication	Fired after the server presents its certificate to the client.
SSLStatus	Fired when secure connection progress messages are available.
SubOption	This event is fired when a Telnet SubOption command comes from the Telnet server.
Will	This event is fired when a Telnet WILL OPTION command comes from the Telnet server.
Wont	This event is fired when a Telnet WONT OPTION command comes from the Telnet server.

Config Settings

The following is a list of config settings for the component with short descriptions. Click on the links for further details.


CloseStreamAfterTransfer	If true, the component will close the upload or download stream after the transfer.
ConnectionTimeout	Sets a separate timeout value for establishing a connection.
FirewallAutoDetect	Tells the component whether or not to automatically detect and use firewall system settings, if available.
FirewallHost	Name or IP address of firewall (optional).
FirewallPassword	Password to be used if authentication is to be used when connecting through the firewall.
FirewallPort	The TCP port for the FirewallHost;.
FirewallType	Determines the type of firewall to connect through.
FirewallUser	A user name if authentication is to be used connecting through a firewall.
KeepAliveInterval	The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTime	The inactivity time in milliseconds before a TCP keep-alive packet is sent.
Linger	When set to True, connections are terminated gracefully.
LingerTime	Time in seconds to have the connection linger.
LocalHost	The name of the local host through which connections are initiated or accepted.
LocalPort	The port in the local host where the component binds.
MaxLineLength	The maximum amount of data to accumulate when no EOL is found.
MaxTransferRate	The transfer rate limit in bytes per second.
ProxyExceptionsList	A semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAlive	Determines whether or not the keep alive socket option is enabled.
TcpNoDelay	Whether or not to delay when sending packets.
UseIPv6	Whether to use IPv6.
LogSSLPackets	Controls whether SSL packets are logged when using the internal security API.
OpenSSLCADir	The path to a directory containing CA certificates.
OpenSSLCAFile	Name of the file containing the list of CA's trusted by your application.
OpenSSLCipherList	A string that controls the ciphers to be used by SSL.
OpenSSLPrngSeedData	The data to seed the pseudo random number generator (PRNG).
ReuseSSLSession	Determines if the SSL session is reused.
SSLCACerts	A newline separated list of CA certificates to be included when performing an SSL handshake.
SSLCheckCRL	Whether to check the Certificate Revocation List for the server certificate.
SSLCheckOCSP	Whether to use OCSP to check the status of the server certificate.
SSLCipherStrength	The minimum cipher strength used for bulk encryption.
SSLClientCACerts	A newline separated list of CA certificates to use during SSL client certificate validation.
SSLEnabledCipherSuites	The cipher suite to be used in an SSL negotiation.
SSLEnabledProtocols	Used to enable/disable the supported security protocols.
SSLEnableRenegotiation	Whether the renegotiation_info SSL extension is supported.
SSLIncludeCertChain	Whether the entire certificate chain is included in the SSLServerAuthentication event.
SSLKeyLogFile	The location of a file where per-session secrets are written for debugging purposes.
SSLNegotiatedCipher	Returns the negotiated cipher suite.
SSLNegotiatedCipherStrength	Returns the negotiated cipher suite strength.
SSLNegotiatedCipherSuite	Returns the negotiated cipher suite.
SSLNegotiatedKeyExchange	Returns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrength	Returns the negotiated key exchange algorithm strength.
SSLNegotiatedVersion	Returns the negotiated protocol version.
SSLSecurityFlags	Flags that control certificate verification.
SSLServerCACerts	A newline separated list of CA certificates to use during SSL server certificate validation.
TLS12SignatureAlgorithms	Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.
TLS12SupportedGroups	The supported groups for ECC.
TLS13KeyShareGroups	The groups for which to pregenerate key shares.
TLS13SignatureAlgorithms	The allowed certificate signature algorithms.
TLS13SupportedGroups	The supported groups for (EC)DHE key exchange.
AbsoluteTimeout	Determines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallData	Used to send extra data to the firewall.
InBufferSize	The size in bytes of the incoming queue of the socket.
OutBufferSize	The size in bytes of the outgoing queue of the socket.
BuildInfo	Information about the product's build.
CodePage	The system code page used for Unicode to Multibyte translations.
LicenseInfo	Information about the current license.
MaskSensitiveData	Whether sensitive data is masked in log messages.
UseInternalSecurityAPI	Whether or not to use the system security libraries or an internal implementation.

AcceptData Property (Telnet Component)

This property indicates whether data reception is currently enabled.

Syntax

property AcceptData: Boolean read get_AcceptData;

Default Value

true

Remarks

This property indicates whether data reception is currently enabled. When False, data reception is disabled and the DataIn event will not fire. Use the PauseData and ProcessData methods to pause and resume data reception.

This property is read-only and not available at design time.

BytesSent Property (Telnet Component)

This property includes the number of bytes actually sent after a call to the SendBytes method.

Syntax

property BytesSent: Integer read get_BytesSent;

Default Value

Remarks

The BytesSent property shows how many bytes were sent after the last call to SendBytes or SendUrgentBytes. Please check the SendBytes method for more information.

This property is read-only and not available at design time.

Connected Property (Telnet Component)

This property indicates whether the component is connected.

Syntax

property Connected: Boolean read get_Connected;

Default Value

false

Remarks

This property indicates whether the component is connected to the remote host. Use the Connect and Disconnect methods to manage the connection.

This property is read-only and not available at design time.

Firewall Property (Telnet Component)

A set of properties related to firewall access.

Syntax

property Firewall: TipwFirewall read get_Firewall write set_Firewall;

Remarks

This is a Firewall-type property, which contains fields describing the firewall through which the component will attempt to connect.

Please refer to the Firewall type for a complete list of fields.

KeepAlive Property (Telnet Component)

When True, KEEPALIVE packets are enabled (for long connections).

Syntax

property KeepAlive: Boolean read get_KeepAlive write set_KeepAlive;

Default Value

false

Remarks

The KeepAlive enables the SO_KEEPALIVE option on the socket. This option prevents long connections from timing out in case of inactivity.

Note: System Transmission Control Protocol (TCP)/IP stack implementations are not required to support SO_KEEPALIVE.

Linger Property (Telnet Component)

When set to True, this property ensures that connections are terminated gracefully.

Syntax

property Linger: Boolean read get_Linger write set_Linger;

Default Value

true

Remarks

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.

In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the component returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.

LocalHost Property (Telnet Component)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

property LocalHost: String read get_LocalHost write set_LocalHost;

Default Value

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the component initiate connections (or accept in the case of server components) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the component is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

LocalPort Property (Telnet Component)

This property includes the Transmission Control Protocol (TCP) port in the local host where the TCPClient binds.

Syntax

property LocalPort: Integer read get_LocalPort write set_LocalPort;

Default Value

Remarks

The LocalPort property must be set before a connection is attempted. It instructs the component to bind to a specific port (or communication endpoint) in the local machine.

Setting it to 0 (default) enables the TCP/IP stack to choose a port at random. The chosen port will be shown by the LocalPort property after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set the LocalPort property when a connection is active will generate an error.

The LocalPort property is useful when trying to connect to services that require a trusted port in the client side.

RemoteHost Property (Telnet Component)

This property includes the address of the remote host. Domain names are resolved to IP addresses.

Syntax

property RemoteHost: String read get_RemoteHost write set_RemoteHost;

Default Value

Remarks

This property specifies the IP address (IP number in dotted internet format) or the domain name of the remote host. It is set before a connection is attempted and cannot be changed once a connection is established.

If this property is set to a domain name, a DNS request is initiated, and upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, an error is returned.

If the component is configured to use a SOCKS firewall, the value assigned to this property may be preceded with an "*". If this is the case, the host name is passed to the firewall unresolved and the firewall performs the DNS resolution.

Example. Connecting:

TCPClientControl.RemoteHost = "MyHostNameOrIP" TCPClientControl.RemotePort = 777 TCPClientControl.Connected = true

RemotePort Property (Telnet Component)

This property includes the secure Telnet port in the remote host (default is 23).

Syntax

property RemotePort: Integer read get_RemotePort write set_RemotePort;

Default Value

Remarks

For the implicit Secure Sockets Layer (SSL), use port 992 (for more information, please refer to the SSLStartMode property).

A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

This property is not available at design time.

SSLAcceptServerCert Property (Telnet Component)

Instructs the component to unconditionally accept the server certificate that matches the supplied certificate.

Syntax

property SSLAcceptServerCert: TipwCertificate read get_SSLAcceptServerCert write set_SSLAcceptServerCert;

Remarks

If it finds any issues with the certificate presented by the server, the component will normally terminate the connection with an error.

You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally.

Note: This functionality is provided only for cases in which you otherwise know that you are communicating with the right server. If used improperly, this property may create a security breach. Use it at your own risk.

Please refer to the Certificate type for a complete list of fields.

SSLCert Property (Telnet Component)

The certificate to be used during Secure Sockets Layer (SSL) negotiation.

Syntax

property SSLCert: TipwCertificate read get_SSLCert write set_SSLCert;

Remarks

This property includes the digital certificate that the component will use during SSL negotiation. Set this property to a valid certificate before starting SSL negotiation. To set a certificate, you may set the Encoded field to the encoded certificate. To select a certificate, use the store and subject fields.

Please refer to the Certificate type for a complete list of fields.

SSLEnabled Property (Telnet Component)

This property indicates whether Transport Layer Security/Secure Sockets Layer (TLS/SSL) is enabled.

Syntax

property SSLEnabled: Boolean read get_SSLEnabled write set_SSLEnabled;

Default Value

false

Remarks

This property specifies whether TLS/SSL is enabled in the component. When False (default), the component operates in plaintext mode. When True, TLS/SSL is enabled.

TLS/SSL may also be enabled by setting SSLStartMode. Setting SSLStartMode will automatically update this property value.

This property is not available at design time.

SSLProvider Property (Telnet Component)

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax

property SSLProvider: TipwTSSLProviders read get_SSLProvider write set_SSLProvider;

TipwTSSLProviders = (
  sslpAutomatic,
  sslpPlatform,
  sslpInternal
);

Default Value

sslpAutomatic

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the component will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:


0 (sslpAutomatic - default)	Automatically selects the appropriate implementation.
1 (sslpPlatform)	Uses the platform/system implementation.
2 (sslpInternal)	Uses the internal implementation.

Additional Notes

In most cases using the default value (Automatic) is recommended. The component will select a provider depending on the current platform.

When Automatic is selected, on Windows, the component will use the platform implementation. On Linux/macOS, the component will use the internal implementation. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used on all platforms.

SSLServerCert Property (Telnet Component)

The server certificate for the last established connection.

Syntax

property SSLServerCert: TipwCertificate read get_SSLServerCert;

Remarks

This property contains the server certificate for the last established connection.

SSLServerCert is reset every time a new connection is attempted.

This property is read-only.

Please refer to the Certificate type for a complete list of fields.

SSLStartMode Property (Telnet Component)

This property determines how the component starts the Secure Sockets Layer (SSL) negotiation.

Syntax

property SSLStartMode: TipwTSSLStartModes read get_SSLStartMode write set_SSLStartMode;

TipwTSSLStartModes = (
  sslAutomatic,
  sslImplicit,
  sslExplicit,
  sslNone
);

Default Value

sslNone

Remarks

The SSLStartMode property may have one of the following values:


0 (sslAutomatic)	If the remote port is set to the standard plaintext port of the protocol (where applicable), the component will behave the same as if SSLStartMode is set to sslExplicit. In all other cases, SSL negotiation will be implicit (sslImplicit).
1 (sslImplicit)	The SSL negotiation will start immediately after the connection is established.
2 (sslExplicit)	The component will first connect in plaintext, and then will explicitly start SSL negotiation through a protocol command such as STARTTLS.
3 (sslNone - default)	No SSL negotiation; no SSL security. All communication will be in plaintext mode.

Timeout Property (Telnet Component)

This property specifies the timeout for the component.

Syntax

property Timeout: Integer read get_Timeout write set_Timeout;

Default Value

Remarks

If the Timeout property is set to 0, all operations return immediately, potentially failing with an WOULDBLOCK error if data cannot be sent or received immediately.

If Timeout is set to a positive value, the component will automatically retry each operation that otherwise would result in a WOULDBLOCK error for a maximum of Timeout seconds.

The component will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the component raises an exception.

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 0 (asynchronous operation).

Transparent Property (Telnet Component)

When this property is True, Telnet command processing is disabled.

Syntax

property Transparent: Boolean read get_Transparent write set_Transparent;

Default Value

false

Remarks

The Transparent property allows you to enable or disable Telnet command processing. When command processing is disabled, any data received are provided with no modifications.

Config Method (Telnet Component)

Sets or retrieves a configuration setting.

Syntax

function Config(ConfigurationString: String): String;

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (Telnet Component)

This method connects to a remote host.

Syntax

procedure Connect();

Remarks

This method connects to the remote host specified by RemoteHost. For instance: component.RemoteHost = "MyHostNameOrIP"; component.Connect();

To specify a nonstandard port number, set RemotePort before calling this method.

ConnectTo Method (Telnet Component)

This method connects to a remote host.

Syntax

procedure ConnectTo(Host: String);

Remarks

This method connects to the remote host specified by the Host. For instance: component.Connect("MyTelnetServer");

To specify a nonstandard port number set RemotePort before calling this method.

Disconnect Method (Telnet Component)

This method disconnects from the remote host.

Syntax

procedure Disconnect();

Remarks

Calling this method is equivalent to setting the Connected property to False.

DoEvents Method (Telnet Component)

This method processes events from the internal message queue.

Syntax

procedure DoEvents();

Remarks

When DoEvents is called, the component processes any available events. If no events are available, it waits for a preset period of time, and then returns.

PauseData Method (Telnet Component)

This method pauses data reception.

Syntax

procedure PauseData();

Remarks

This method pauses data reception when called. While data reception is paused, the DataIn event will not fire. Call ProcessData to reenable data reception.

ProcessData Method (Telnet Component)

This method reenables data reception after a call to PauseData .

Syntax

procedure ProcessData();

Remarks

This method reenables data reception after a previous call to PauseData. When PauseData is called, the DataIn event will not fire. To reenable data reception and allow DataIn to fire, call this method.

Note: This method is used only after previously calling PauseData. It does not need to be called to process incoming data by default.

Reset Method (Telnet Component)

This method will reset the component.

Syntax

procedure Reset();

Remarks

This method will reset the component's properties to their default values.

Send Method (Telnet Component)

This method sends binary data to the remote host.

Syntax

procedure Send(Text: TBytes);

Remarks

This method sends the specified binary data to the remote host. To send text, use the SendText method instead.

SendBytes Method (Telnet Component)

This method sends binary data to the remote host.

Syntax

procedure SendBytes(Data: TBytes);

Remarks

This method sends the specified binary data to the remote host. To send text, use the SendText method instead.

SendCommand Method (Telnet Component)

This method sends a single-character Telnet command code to the server.

Syntax

procedure SendCommand(Command: Integer);

Remarks

This method sends the single-character command code specified by Command to the server. Codes for Telnet commands and their meanings are defined in the Telnet RFCs. Some common commands are as follows:


241 (NOP)	No operation.
242 (Data Mark)	The data stream portion of a Synch. This code should always be accompanied by a TCP Urgent notification.
243 (Break)	NVT character BRK.
244 (Interrupt Process)	The function IP.
245 (Abort Output)	The function AO.
246 (Are You There)	The function AYT.
247 (Erase Character)	The function EC.
248 (Erase Line)	The function EL.
249 (Go Ahead)	The GA signal.

SendDontOption Method (Telnet Component)

This method sends a single-character Telnet option code to the server with the Telnet DONT command.

Syntax

procedure SendDontOption(DontOption: Integer);

Remarks

For a list of option codes and their descriptions, please look at the Telnet RFCs. Following are a few examples:


0 (TRANSMIT-BINARY)	Enables or disables binary (8 bit) transmission.
1 (ECHO)	Telnet ECHO option. Specifies whether or not bytes sent should be echoed.
3 (SUPPRESS-GO-AHEAD)	Used to enable or disable transmission of the Telnet GO_AHEAD command.
24 (TERMINAL-TYPE)	Allows or disallows terminal-type negotiation.
31 (NAWS)	Allows or disallows window size negotiation.

SendDoOption Method (Telnet Component)

This method sends a single-character Telnet option code to the server with the Telnet DO command.

Syntax

procedure SendDoOption(DoOption: Integer);

Remarks

For a list of option codes and their descriptions, please look at the Telnet RFCs. Following are a few examples:


0 (TRANSMIT-BINARY)	Enables or disables binary (8 bit) transmission.
1 (ECHO)	Telnet ECHO option. Specifies whether or not bytes sent should be echoed.
3 (SUPPRESS-GO-AHEAD)	Used to enable or disable transmission of the Telnet GO_AHEAD command.
24 (TERMINAL-TYPE)	Allows or disallows terminal-type negotiation.
31 (NAWS)	Allows or disallows window size negotiation.

SendDoSubOption Method (Telnet Component)

This methods sends a Telnet SubOption to send to the server with the SubOption command.

Syntax

procedure SendDoSubOption(DoSubOption: TBytes);

Remarks

Valid suboptions and their descriptions are defined in the Telnet RFCs.

For example, to send a terminal type suboption to request setting the terminal type to 'vt100', send ASCII 24, followed by ASCII 0, followed by vt100.

Suboption start and end codes are automatically added by the component.

SendText Method (Telnet Component)

This method sends text to the remote host.

Syntax

procedure SendText(Text: String);

Remarks

This method sends the specified text to the remote host. To send binary data, use the SendBytes method instead.

SendUrgentBytes Method (Telnet Component)

This method urgently sends binary data to the remote host.

Syntax

procedure SendUrgentBytes(UrgentBytes: TBytes);

Remarks

This method sends the bytes specified by UrgentBytes as urgent data (out-of-band) to the remote host. To send text urgently, use the SendUrgentText method instead.

Data sent using this method will bypass the normal Transmission Control Protocol (TCP) queuing mechanism. Use this method with caution.

SendUrgentText Method (Telnet Component)

This method urgently sends text to the remote host.

Syntax

procedure SendUrgentText(UrgentText: String);

Remarks

This method sends the text specified by UrgentText as urgent data (out-of-band) to the remote host. To send binary data urgently, use the SendUrgentBytes method instead.

Data sent using this method will bypass the normal Transmission Control Protocol (TCP) queuing mechanism. Use this method with caution.

SendWillOption Method (Telnet Component)

This method sends a single-character Telnet option code the server with the Telnet WILL command.

Syntax

procedure SendWillOption(WillOption: Integer);

Remarks

For a list of option codes and their descriptions, please look at the Telnet RFCs. Following are a few examples:


0 (TRANSMIT-BINARY)	Enables or disables binary (8 bit) transmission.
1 (ECHO)	Telnet ECHO option. Specifies whether or not bytes sent should be echoed.
3 (SUPPRESS-GO-AHEAD)	Used to enable or disable transmission of the Telnet GO_AHEAD command.
24 (TERMINAL-TYPE)	Allows or disallows terminal-type negotiation.
31 (NAWS)	Allows or disallows window size negotiation.

SendWontOption Method (Telnet Component)

This method sends a single-character Telnet option code to the server with the Telnet WONT command.

Syntax

procedure SendWontOption(WontOption: Integer);

Remarks

For a list of option codes and their descriptions, please look at the Telnet RFCs. Following are a few examples:


0 (TRANSMIT-BINARY)	Enables or disables binary (8 bit) transmission.
1 (ECHO)	Telnet ECHO option. Specifies whether or not bytes sent should be echoed.
3 (SUPPRESS-GO-AHEAD)	Used to enable or disable transmission of the Telnet GO_AHEAD command.
24 (TERMINAL-TYPE)	Allows or disallows terminal-type negotiation.
31 (NAWS)	Allows or disallows window size negotiation.

Command Event (Telnet Component)

This event is fired when a Telnet command comes from the Telnet server.

Syntax

type TCommandEvent = procedure (
  Sender: TObject;
  CommandCode: Integer
) of Object;

property OnCommand: TCommandEvent read FOnCommand write FOnCommand;

Remarks

Codes for Telnet commands and their meanings are defined in the Telnet RFCs. Following are some examples:


241 (NOP)	No operation.
242 (Data Mark)	The data stream portion of a Synch. This code should always be accompanied by a TCP Urgent notification.
243 (Break)	NVT character BRK.
244 (Interrupt Process)	The function IP.
245 (Abort Output)	The function AO.
246 (Are You There)	The function AYT.
247 (Erase Character)	The function EC.
248 (Erase Line)	The function EL.
249 (Go Ahead)	The GA signal.

Connected Event (Telnet Component)

Fired immediately after a connection completes (or fails).

Syntax

type TConnectedEvent = procedure (
  Sender: TObject;
  StatusCode: Integer;
  const Description: String
) of Object;

property OnConnected: TConnectedEvent read FOnConnected write FOnConnected;

Remarks

If the connection is made normally, StatusCode is 0 and Description is 'OK'.

If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

Please refer to the Error Codes section for more information.

ConnectionStatus Event (Telnet Component)

Fired to indicate changes in the connection state.

Syntax

type TConnectionStatusEvent = procedure (
  Sender: TObject;
  const ConnectionEvent: String;
  StatusCode: Integer;
  const Description: String
) of Object;

property OnConnectionStatus: TConnectionStatusEvent read FOnConnectionStatus write FOnConnectionStatus;

Remarks

This event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:


	Firewall connection complete.
	Secure Sockets Layer (SSL) or S/Shell handshake complete (where applicable).
	Remote host connection complete.
	Remote host disconnected.
	SSL or S/Shell connection broken.
	Firewall host disconnected.

StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

DataIn Event (Telnet Component)

This event is fired when data are received from the remote host.

Syntax

type TDataInEvent = procedure (
  Sender: TObject;
  const Text: String;
  const TextB: TBytes
) of Object;

property OnDataIn: TDataInEvent read FOnDataIn write FOnDataIn;

Remarks

Trapping the DataIn event is your only chance to get the data coming from the other end of the connection. Incoming data are provided through the Text parameter.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Disconnected Event (Telnet Component)

Fired when a connection is closed.

Syntax

type TDisconnectedEvent = procedure (
  Sender: TObject;
  StatusCode: Integer;
  const Description: String
) of Object;

property OnDisconnected: TDisconnectedEvent read FOnDisconnected write FOnDisconnected;

Remarks

If the connection is broken normally, StatusCode is 0 and Description is 'OK'.

If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP/IP) subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error.

Please refer to the Error Codes section for more information.

Do Event (Telnet Component)

This event is fired when a Telnet DO OPTION command comes from the Telnet server.

Syntax

type TDoEvent = procedure (
  Sender: TObject;
  OptionCode: Integer
) of Object;

property OnDo: TDoEvent read FOnDo write FOnDo;

Remarks

The OptionCode parameter identifies the option code. For a list of option codes and their descriptions, please look at the Telnet RFCs. Following are a few examples:


0 (TRANSMIT-BINARY)	Enables or disables binary (8 bit) transmission.
1 (ECHO)	Telnet ECHO option. Specifies whether or not bytes sent should be echoed.
3 (SUPPRESS-GO-AHEAD)	Used to enable or disable transmission of the Telnet GO_AHEAD command.
24 (TERMINAL-TYPE)	Allows or disallows terminal-type negotiation.
31 (NAWS)	Allows or disallows window size negotiation.

Dont Event (Telnet Component)

This event is fired when a Telnet DONT OPTION command comes from the Telnet server.

Syntax

type TDontEvent = procedure (
  Sender: TObject;
  OptionCode: Integer
) of Object;

property OnDont: TDontEvent read FOnDont write FOnDont;

Remarks

The OptionCode parameter identifies the option code. For a list of option codes and their descriptions, please look at the Telnet RFCs. Following are a few examples:


0 (TRANSMIT-BINARY)	Enables or disables binary (8 bit) transmission.
1 (ECHO)	Telnet ECHO option. Specifies whether or not bytes sent should be echoed.
3 (SUPPRESS-GO-AHEAD)	Used to enable or disable transmission of the Telnet GO_AHEAD command.
24 (TERMINAL-TYPE)	Allows or disallows terminal-type negotiation.
31 (NAWS)	Allows or disallows window size negotiation.

Error Event (Telnet Component)

Fired when information is available about errors during data delivery.

Syntax

type TErrorEvent = procedure (
  Sender: TObject;
  ErrorCode: Integer;
  const Description: String
) of Object;

property OnError: TErrorEvent read FOnError write FOnError;

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

ReadyToSend Event (Telnet Component)

This event is fired when the component is ready to send data.

Syntax

type TReadyToSendEvent = procedure (
  Sender: TObject
) of Object;

property OnReadyToSend: TReadyToSendEvent read FOnReadyToSend write FOnReadyToSend;

Remarks

The ReadyToSend event indicates that the underlying Transmission Control Protocol (TCP)/IP subsystem is ready to accept data after a failed SendBytes. The event is also fired immediately after a connection to the remote host is established.

SSLServerAuthentication Event (Telnet Component)

Fired after the server presents its certificate to the client.

Syntax

type TSSLServerAuthenticationEvent = procedure (
  Sender: TObject;
  const CertEncoded: String;
  const CertEncodedB: TBytes;
  const CertSubject: String;
  const CertIssuer: String;
  const Status: String;
  var Accept: Boolean
) of Object;

property OnSSLServerAuthentication: TSSLServerAuthenticationEvent read FOnSSLServerAuthentication write FOnSSLServerAuthentication;

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (Telnet Component)

Fired when secure connection progress messages are available.

Syntax

type TSSLStatusEvent = procedure (
  Sender: TObject;
  const Message: String
) of Object;

property OnSSLStatus: TSSLStatusEvent read FOnSSLStatus write FOnSSLStatus;

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

SubOption Event (Telnet Component)

This event is fired when a Telnet SubOption command comes from the Telnet server.

Syntax

type TSubOptionEvent = procedure (
  Sender: TObject;
  const SubOption: String;
  const SubOptionB: TBytes
) of Object;

property OnSubOption: TSubOptionEvent read FOnSubOption write FOnSubOption;

Remarks

The SubOption parameter contains the suboption data as sent by the other end. The enclosing suboption command codes are stripped away.

For a list of valid Telnet suboptions and their descriptions, please look at the Telnet RFCs.

Will Event (Telnet Component)

This event is fired when a Telnet WILL OPTION command comes from the Telnet server.

Syntax

type TWillEvent = procedure (
  Sender: TObject;
  OptionCode: Integer
) of Object;

property OnWill: TWillEvent read FOnWill write FOnWill;

Remarks

For a list of option codes and their descriptions, please look at the Telnet RFCs. Following are a few examples:


0 (TRANSMIT-BINARY)	Enables or disables binary (8 bit) transmission.
1 (ECHO)	Telnet ECHO option. Specifies whether or not bytes sent should be echoed.
3 (SUPPRESS-GO-AHEAD)	Used to enable or disable transmission of the Telnet GO_AHEAD command.
24 (TERMINAL-TYPE)	Allows or disallows terminal-type negotiation.
31 (NAWS)	Allows or disallows window size negotiation.

Wont Event (Telnet Component)

This event is fired when a Telnet WONT OPTION command comes from the Telnet server.

Syntax

type TWontEvent = procedure (
  Sender: TObject;
  OptionCode: Integer
) of Object;

property OnWont: TWontEvent read FOnWont write FOnWont;

Remarks

The OptionCode parameter identifies the option code. For a list of option codes and their descriptions, please look at the Telnet RFCs. Following are a few examples:


0 (TRANSMIT-BINARY)	Enables or disables binary (8 bit) transmission.
1 (ECHO)	Telnet ECHO option. Specifies whether or not bytes sent should be echoed.
3 (SUPPRESS-GO-AHEAD)	Used to enable or disable transmission of the Telnet GO_AHEAD command.
24 (TERMINAL-TYPE)	Allows or disallows terminal-type negotiation.
31 (NAWS)	Allows or disallows window size negotiation.

Certificate Type

This is the digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

The following fields are available:

Fields

EffectiveDate
String (read-only)
Default Value: ""

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

ExpirationDate
String (read-only)
Default Value: ""

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

ExtendedKeyUsage
String (read-only)
Default Value: ""

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

Fingerprint
String (read-only)
Default Value: ""

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

FingerprintSHA1
String (read-only)
Default Value: ""

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

FingerprintSHA256
String (read-only)
Default Value: ""

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

Issuer
String (read-only)
Default Value: ""

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

PrivateKey
String (read-only)
Default Value: ""

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The PrivateKey may be available but not exportable. In this case, PrivateKey returns an empty string.

PrivateKeyAvailable
Boolean (read-only)
Default Value: False

Whether a PrivateKey is available for the selected certificate. If PrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

PrivateKeyContainer
String (read-only)
Default Value: ""

The name of the PrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

PublicKey
String (read-only)
Default Value: ""

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

PublicKeyAlgorithm
String (read-only)
Default Value: ""

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

PublicKeyLength
Integer (read-only)
Default Value: 0

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

SerialNumber
String (read-only)
Default Value: ""

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

SignatureAlgorithm
String (read-only)
Default Value: ""

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

Store
String
Default Value: "MY"

The name of the certificate store for the client certificate.

The StoreType property denotes the type of the certificate store specified by Store. If the store is password-protected, specify the password in StorePassword.

Store is used in conjunction with the Subject property to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

StoreB
TBytes
Default Value: "MY"

The name of the certificate store for the client certificate.

The StoreType property denotes the type of the certificate store specified by Store. If the store is password-protected, specify the password in StorePassword.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

StorePassword
String
Default Value: ""

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

StoreType
TipwCertStoreTypes
Default Value: 0

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: This store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: This store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: This store type is only available in Java and .NET.
23 (cstPKCS11)	The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, the necessary data must first be collected using the CertMgr component. The ListStoreCertificates method may be called after setting CertStoreType to `cstPKCS11`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN. Code Example. SSH Authentication with Security Key: `certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

SubjectAltNames
String (read-only)
Default Value: ""

Comma-separated lists of alternative subject names for the certificate.

ThumbprintMD5
String (read-only)
Default Value: ""

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA1
String (read-only)
Default Value: ""

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA256
String (read-only)
Default Value: ""

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

Usage
String (read-only)
Default Value: ""

The text description of UsageFlags.

This value will be one or more of the following strings and will be separated by commas:

Digital Signature
Non-Repudiation
Key Encipherment
Data Encipherment
Key Agreement
Certificate Signing
CRL Signing
Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

UsageFlags
Integer (read-only)
Default Value: 0

The flags that show intended use for the certificate. The value of UsageFlags is a combination of the following flags:


0x80	Digital Signature
0x40	Non-Repudiation
0x20	Key Encipherment
0x10	Data Encipherment
0x08	Key Agreement
0x04	Certificate Signing
0x02	CRL Signing
0x01	Encipher Only

Please see the Usage property for a text representation of UsageFlags.

This functionality currently is not available when the provider is OpenSSL.

Version
String (read-only)
Default Value: ""

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

Subject
String
Default Value: ""

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:


Field	Meaning
CN	Common Name. This is commonly a hostname like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

Encoded
String
Default Value: ""

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The Store and Subject properties also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

EncodedB
TBytes
Default Value: ""

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The Store and Subject properties also may be used to specify a certificate.

Constructors

constructor Create();

Creates a instance whose properties can be set. This is useful for use with when generating new certificates.

constructor Create(valEncoded: TBytes);

Parses Encoded as an X.509 public key.

constructor Create(valStoreType: TipwCertStoreTypes; valStore: String; valStorePassword: String; valSubject: String);

StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store.

After the store has been successfully opened, the component will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

constructor Create(valStoreType: TipwCertStoreTypes; valStore: TBytes; valStorePassword: String; valSubject: String);

StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a byte array containing the certificate data. StorePassword is the password used to protect the store.

Firewall Type

The firewall the component will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall, such as the firewall Host and the FirewallType.

The following fields are available:

Fields

AutoDetect
Boolean
Default Value: False

Whether to automatically detect and use firewall system settings, if available.

FirewallType
TipwFirewallTypes
Default Value: 0

The type of firewall to connect through. The applicable values are as follows:


fwNone (0)	No firewall (default setting).
fwTunnel (1)	Connect through a tunneling proxy. Port is set to 80.
fwSOCKS4 (2)	Connect through a SOCKS4 Proxy. Port is set to 1080.
fwSOCKS5 (3)	Connect through a SOCKS5 Proxy. Port is set to 1080.
fwSOCKS4A (10)	Connect through a SOCKS4A Proxy. Port is set to 1080.

Host
String
Default Value: ""

The name or IP address of the firewall (optional). If a Host is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the component raises an exception.

Password
String
Default Value: ""

A password if authentication is to be used when connecting through the firewall. If Host is specified, the User and Password properties are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.

Port
Integer
Default Value: 0

The Transmission Control Protocol (TCP) port for the firewall Host. See the description of the Host property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

User
String
Default Value: ""

A username if authentication is to be used when connecting through a firewall. If Host is specified, this property and the Password property are used to connect and authenticate to the given Firewall. If the authentication fails, the component raises an exception.

Constructors

constructor Create();

Config Settings (Telnet Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

TCPClient Config Settings

CloseStreamAfterTransfer: If true, the component will close the upload or download stream after the transfer.

This configuration setting determines whether the input or output stream is closed after the transfer completes. When set to True (default), all streams will be closed after a transfer is completed. To keep streams open after the transfer of data, set this to False. The default value is True.

ConnectionTimeout: Sets a separate timeout value for establishing a connection.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the component will use Timeout for establishing a connection and transmitting/receiving data.

FirewallAutoDetect: Tells the component whether or not to automatically detect and use firewall system settings, if available.

This configuration setting is provided for use by components that do not directly expose Firewall properties.

FirewallHost: Name or IP address of firewall (optional).

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

FirewallPassword: Password to be used if authentication is to be used when connecting through the firewall.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

FirewallPort: The TCP port for the FirewallHost;.

The FirewallPort is set automatically when FirewallType is set to a valid value.

Note: This configuration setting is provided for use by components that do not directly expose Firewall properties.

FirewallType: Determines the type of firewall to connect through.

Possible values are as follows:


0	No firewall (default setting).
1	Connect through a tunneling proxy. FirewallPort is set to 80.
2	Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
3	Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
10	Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

FirewallUser: A user name if authentication is to be used connecting through a firewall.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the component raises an exception.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

KeepAliveInterval: The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

When set, TCPKeepAlive will automatically be set to True. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in macOS.

KeepAliveTime: The inactivity time in milliseconds before a TCP keep-alive packet is sent.

When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Linger: When set to True, connections are terminated gracefully.

This property controls how a connection is closed. The default is True.

LingerTime: Time in seconds to have the connection linger.

LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout.

LocalHost: The name of the local host through which connections are initiated or accepted.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface), setting LocalHost to the value of an interface will make the component initiate connections (or accept in the case of server components) only through that interface.

If the component is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

LocalPort: The port in the local host where the component binds.

This configuration setting must be set before a connection is attempted. It instructs the component to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This configuration setting is useful when trying to connect to services that require a trusted port on the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength: The maximum amount of data to accumulate when no EOL is found.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.

MaxTransferRate: The transfer rate limit in bytes per second.

This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit.

ProxyExceptionsList: A semicolon separated list of hosts and IPs to bypass when using a proxy.

This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use. When requests are made to hosts specified in this property, the proxy will not be used. For instance:

www.google.com;www.nsoftware.com

TCPKeepAlive: Determines whether or not the keep alive socket option is enabled.

If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

TcpNoDelay: Whether or not to delay when sending packets.

When set to True, the socket will send all data that are ready to send at once. When set to False, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this configuration setting is set to False.

UseIPv6: Whether to use IPv6.

When set to 0 (default), the component will use IPv4 exclusively. When set to 1, the component will use IPv6 exclusively. To instruct the component to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are as follows:


0	IPv4 only
1	IPv6 only
2	IPv6 with IPv4 fallback

SSL Config Settings

LogSSLPackets: Controls whether SSL packets are logged when using the internal security API.

When SSLProvider is set to Internal, this configuration setting controls whether Secure Sockets Layer (SSL) packets should be logged. By default, this configuration setting is False, as it is useful only for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this configuration setting has no effect if SSLProvider is set to Platform.

OpenSSLCADir: The path to a directory containing CA certificates.

This functionality is available only when the provider is OpenSSL.

The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g., 9d66eef0.0, 9d66eef0.1). OpenSSL recommends the use of the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCAFile: Name of the file containing the list of CA's trusted by your application.

This functionality is available only when the provider is OpenSSL.

The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by the following sequences:

-----BEGIN CERTIFICATE-----

... (CA certificate in base64 encoding) ...

-----END CERTIFICATE-----

Before, between, and after the certificate text is allowed, which can be used, for example, for descriptions of the certificates. Refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCipherList: A string that controls the ciphers to be used by SSL.

This functionality is available only when the provider is OpenSSL.

The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".

OpenSSLPrngSeedData: The data to seed the pseudo random number generator (PRNG).

This functionality is available only when the provider is OpenSSL.

By default, OpenSSL uses the device file "/dev/urandom" to seed the PRNG, and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.

ReuseSSLSession: Determines if the SSL session is reused.

If set to True, the component will reuse the context if and only if the following criteria are met:

The target host name is the same.
The system cache entry has not expired (default timeout is 10 hours).
The application process that calls the function is the same.
The logon session is the same.
The instance of the component is the same.

SSLCACerts: A newline separated list of CA certificates to be included when performing an SSL handshake.

When SSLProvider is set to Internal, this configuration setting specifies one or more CA certificates to be included with the SSLCert property. Some servers or clients require the entire chain, including CA certificates, to be presented when performing SSL authentication. The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLCheckCRL: Whether to check the Certificate Revocation List for the server certificate.

This configuration setting specifies whether the component will check the Certificate Revocation List (CRL) specified by the server certificate. If set to 1 or 2, the component will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The component will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the component raises an exception.

When set to 0 (default), the CRL check will not be performed by the component. When set to 1, it will attempt to perform the CRL check, but it will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.

This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems.

SSLCheckOCSP: Whether to use OCSP to check the status of the server certificate.

This configuration setting specifies whether the component will use OCSP to check the validity of the server certificate. If set to 1 or 2, the component will first obtain the Online Certificate Status Protocol (OCSP) URL from the server certificate's OCSP extension. The component will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation, the component raises an exception.

When set to 0 (default), the component will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but it will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.

This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems.

SSLCipherStrength: The minimum cipher strength used for bulk encryption.

This minimum cipher strength is largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Note: This configuration setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this configuration setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList configuration setting.

SSLClientCACerts: A newline separated list of CA certificates to use during SSL client certificate validation.

This configuration setting is only applicable to server components (e.g., TCPServer) see SSLServerCACerts for client components (e.g., TCPClient). This setting can be used to optionally specify one or more CA certificates to be used when verifying the client certificate that is presented by the client during the SSL handshake when SSLAuthenticateClients is enabled. When verifying the client's certificate, the certificates trusted by the system will be used as part of the verification process. If the client's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This configuration setting should be set only if the client's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLEnabledCipherSuites: The cipher suite to be used in an SSL negotiation.

This configuration setting enables the cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the component will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when SSLProvider is set to Platform include the following: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=CALG_AES_256"); obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES"); Possible values when SSLProvider is set to Platform include the following:

CALG_3DES
CALG_3DES_112
CALG_AES
CALG_AES_128
CALG_AES_192
CALG_AES_256
CALG_AGREEDKEY_ANY
CALG_CYLINK_MEK
CALG_DES
CALG_DESX
CALG_DH_EPHEM
CALG_DH_SF
CALG_DSS_SIGN
CALG_ECDH
CALG_ECDH_EPHEM
CALG_ECDSA
CALG_ECMQV
CALG_HASH_REPLACE_OWF
CALG_HUGHES_MD5
CALG_HMAC
CALG_KEA_KEYX
CALG_MAC
CALG_MD2
CALG_MD4
CALG_MD5
CALG_NO_SIGN
CALG_OID_INFO_CNG_ONLY
CALG_OID_INFO_PARAMETERS
CALG_PCT1_MASTER
CALG_RC2
CALG_RC4
CALG_RC5
CALG_RSA_KEYX
CALG_RSA_SIGN
CALG_SCHANNEL_ENC_KEY
CALG_SCHANNEL_MAC_KEY
CALG_SCHANNEL_MASTER_HASH
CALG_SEAL
CALG_SHA
CALG_SHA1
CALG_SHA_256
CALG_SHA_384
CALG_SHA_512
CALG_SKIPJACK
CALG_SSL2_MASTER
CALG_SSL3_MASTER
CALG_SSL3_SHAMD5
CALG_TEK
CALG_TLS1_MASTER
CALG_TLS1PRF

Example values when SSLProvider is set to Internalinclude the following:

obj.config("SSLEnabledCipherSuites=*");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_ECDH_RSA_WITH_AES_128_CBC_SHA");

Possible values when SSLProvider is set to Internal include the following:

TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_128_GCM_SHA256
TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA256
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
TLS_DHE_RSA_WITH_AES_256_CBC_SHA
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
TLS_DHE_DSS_WITH_AES_256_CBC_SHA
TLS_RSA_WITH_AES_128_CBC_SHA
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_DSS_WITH_AES_128_CBC_SHA
TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_DES_CBC_SHA
TLS_DHE_RSA_WITH_DES_CBC_SHA
TLS_DHE_DSS_WITH_DES_CBC_SHA
TLS_RSA_WITH_RC4_128_MD5
TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols), only the following cipher suites are supported:

TLS_AES_256_GCM_SHA384
TLS_CHACHA20_POLY1305_SHA256
TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols: Used to enable/disable the supported security protocols.

This configuration setting is used to enable or disable the supported security protocols.

Not all supported protocols are enabled by default. The default value is 4032 for client components, and 3072 for server components. To specify a combination of enabled protocol versions set this config to the binary OR of one or more of the following values:


TLS1.3	12288 (Hex 3000)
TLS1.2	3072 (Hex C00) (Default - Client and Server)
TLS1.1	768 (Hex 300) (Default - Client)
TLS1	192 (Hex C0) (Default - Client)
SSL3	48 (Hex 30)
SSL2	12 (Hex 0C)

Note that only TLS 1.2 is enabled for server components that accept incoming connections. This adheres to industry standards to ensure a secure connection. Client components enable TLS 1.0, TLS 1.1, and TLS 1.2 by default and will negotiate the highest mutually supported version when connecting to a server, which should be TLS 1.2 in most cases.

SSLEnabledProtocols: Transport Layer Security (TLS) 1.3 Notes:

By default when TLS 1.3 is enabled, the component will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions.

In editions that are designed to run on Windows, SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is supported only on Windows 11/Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.

If set to 1 (Platform provider), please be aware of the following notes:

The platform provider is available only on Windows 11/Windows Server 2022 and up.
SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2, these restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.

SSLEnabledProtocols: SSL2 and SSL3 Notes:

SSL 2.0 and 3.0 are not supported by the component when the SSLProvider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and SSLProvider needs to be set to platform.

SSLEnableRenegotiation: Whether the renegotiation_info SSL extension is supported.

This configuration setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This configuration setting is False by default, but it can be set to True to enable the extension.

This configuration setting is applicable only when SSLProvider is set to Internal.

SSLIncludeCertChain: Whether the entire certificate chain is included in the SSLServerAuthentication event.

This configuration setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True, all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

SSLKeyLogFile: The location of a file where per-session secrets are written for debugging purposes.

This configuration setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the component will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools, such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffic for debugging purposes. When writing to this file, the component will only append, it will not overwrite previous values.

Note: This configuration setting is applicable only when SSLProvider is set to Internal.

SSLNegotiatedCipher: Returns the negotiated cipher suite.

This configuration setting returns the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

SSLNegotiatedCipherStrength: Returns the negotiated cipher suite strength.

This configuration setting returns the strength of the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

SSLNegotiatedCipherSuite: Returns the negotiated cipher suite.

This configuration setting returns the cipher suite negotiated during the SSL handshake represented as a single string.

SSLNegotiatedKeyExchange: Returns the negotiated key exchange algorithm.

This configuration setting returns the key exchange algorithm negotiated during the SSL handshake.

SSLNegotiatedKeyExchangeStrength: Returns the negotiated key exchange algorithm strength.

This configuration setting returns the strength of the key exchange algorithm negotiated during the SSL handshake.

SSLNegotiatedVersion: Returns the negotiated protocol version.

This configuration setting returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

SSLSecurityFlags: Flags that control certificate verification.

The following flags are defined (specified in hexadecimal notation). They can be ORed together to exclude multiple conditions:


0x00000001	Ignore time validity status of certificate.
0x00000002	Ignore time validity status of CTL.
0x00000004	Ignore non-nested certificate times.
0x00000010	Allow unknown certificate authority.
0x00000020	Ignore wrong certificate usage.
0x00000100	Ignore unknown certificate revocation status.
0x00000200	Ignore unknown CTL signer revocation status.
0x00000400	Ignore unknown certificate authority revocation status.
0x00000800	Ignore unknown root revocation status.
0x00008000	Allow test root certificate.
0x00004000	Trust test root certificate.
0x80000000	Ignore non-matching CN (certificate CN non-matching server name).

This functionality is currently not available when the provider is OpenSSL.

SSLServerCACerts: A newline separated list of CA certificates to use during SSL server certificate validation.

This configuration setting is only used by client components (e.g., TCPClient) see SSLClientCACerts for server components (e.g., TCPServer). This configuration setting can be used to optionally specify one or more CA certificates to be used when connecting to the server and verifying the server certificate. When verifying the server's certificate, the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This configuration setting should be set only if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

TLS12SignatureAlgorithms: Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.

This configuration setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the component will verify that the server certificate signature algorithm is among the values specified in this configuration setting. If the server certificate signature algorithm is unsupported, the component raises an exception.

The format of this value is a comma-separated list of hash-signature combinations. For instance: component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this configuration setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

To not restrict the server's certificate signature algorithm, specify an empty string as the value for this configuration setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups: The supported groups for ECC.

This configuration setting specifies a comma-separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)

TLS13KeyShareGroups: The groups for which to pregenerate key shares.

This configuration setting specifies a comma-separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional roundtrip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result, only some groups are included by default in this configuration setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used that is not present in this list, it will incur an additional roundtrip and time to generate the key share for that group.

In most cases, this configuration setting does not need to be modified. This should be modified only if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448"
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1"
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096"
"ffdhe_6144"
"ffdhe_8192"

TLS13SignatureAlgorithms: The allowed certificate signature algorithms.

This configuration setting holds a comma-separated list of allowed signature algorithms. Possible values include the following:

"ed25519" (default)
"ed448" (default)
"ecdsa_secp256r1_sha256" (default)
"ecdsa_secp384r1_sha384" (default)
"ecdsa_secp521r1_sha512" (default)
"rsa_pkcs1_sha256" (default)
"rsa_pkcs1_sha384" (default)
"rsa_pkcs1_sha512" (default)
"rsa_pss_sha256" (default)
"rsa_pss_sha384" (default)
"rsa_pss_sha512" (default)

The default value is rsa_pss_sha256,rsa_pss_sha384,rsa_pss_sha512,rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512,ecdsa_secp256r1_sha256,ecdsa_secp384r1_sha384,ecdsa_secp521r1_sha512,ed25519,ed448. This configuration setting is applicable only when SSLEnabledProtocols includes TLS 1.3.

TLS13SupportedGroups: The supported groups for (EC)DHE key exchange.

This configuration setting specifies a comma-separated list of named groups used in TLS 1.3 for key exchange. This configuration setting should be modified only if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448" (default)
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096" (default)
"ffdhe_6144" (default)
"ffdhe_8192" (default)

Socket Config Settings

AbsoluteTimeout: Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method that does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for User Datagram Protocol (UDP) ports.

FirewallData: Used to send extra data to the firewall.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g., headers for custom authentication schemes).

InBufferSize: The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the Transmission Control Protocol (TCP)/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. In some cases, increasing the value of the InBufferSize setting can provide significant improvements in performance.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize: The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. In some cases, increasing the value of the OutBufferSize setting can provide significant improvements in performance.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

Base Config Settings

BuildInfo: Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

CodePage: The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:


Identifier	Name
037	IBM EBCDIC - U.S./Canada
437	OEM - United States
500	IBM EBCDIC - International
708	Arabic - ASMO 708
709	Arabic - ASMO 449+, BCON V4
710	Arabic - Transparent Arabic
720	Arabic - Transparent ASMO
737	OEM - Greek (formerly 437G)
775	OEM - Baltic
850	OEM - Multilingual Latin I
852	OEM - Latin II
855	OEM - Cyrillic (primarily Russian)
857	OEM - Turkish
858	OEM - Multilingual Latin I + Euro symbol
860	OEM - Portuguese
861	OEM - Icelandic
862	OEM - Hebrew
863	OEM - Canadian-French
864	OEM - Arabic
865	OEM - Nordic
866	OEM - Russian
869	OEM - Modern Greek
870	IBM EBCDIC - Multilingual/ROECE (Latin-2)
874	ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875	IBM EBCDIC - Modern Greek
932	ANSI/OEM - Japanese, Shift-JIS
936	ANSI/OEM - Simplified Chinese (PRC, Singapore)
949	ANSI/OEM - Korean (Unified Hangul Code)
950	ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026	IBM EBCDIC - Turkish (Latin-5)
1047	IBM EBCDIC - Latin 1/Open System
1140	IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141	IBM EBCDIC - Germany (20273 + Euro symbol)
1142	IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143	IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144	IBM EBCDIC - Italy (20280 + Euro symbol)
1145	IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146	IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147	IBM EBCDIC - France (20297 + Euro symbol)
1148	IBM EBCDIC - International (500 + Euro symbol)
1149	IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200	Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201	Unicode UCS-2 Big-Endian
1250	ANSI - Central European
1251	ANSI - Cyrillic
1252	ANSI - Latin I
1253	ANSI - Greek
1254	ANSI - Turkish
1255	ANSI - Hebrew
1256	ANSI - Arabic
1257	ANSI - Baltic
1258	ANSI/OEM - Vietnamese
1361	Korean (Johab)
10000	MAC - Roman
10001	MAC - Japanese
10002	MAC - Traditional Chinese (Big5)
10003	MAC - Korean
10004	MAC - Arabic
10005	MAC - Hebrew
10006	MAC - Greek I
10007	MAC - Cyrillic
10008	MAC - Simplified Chinese (GB 2312)
10010	MAC - Romania
10017	MAC - Ukraine
10021	MAC - Thai
10029	MAC - Latin II
10079	MAC - Icelandic
10081	MAC - Turkish
10082	MAC - Croatia
12000	Unicode UCS-4 Little-Endian
12001	Unicode UCS-4 Big-Endian
20000	CNS - Taiwan
20001	TCA - Taiwan
20002	Eten - Taiwan
20003	IBM5550 - Taiwan
20004	TeleText - Taiwan
20005	Wang - Taiwan
20105	IA5 IRV International Alphabet No. 5 (7-bit)
20106	IA5 German (7-bit)
20107	IA5 Swedish (7-bit)
20108	IA5 Norwegian (7-bit)
20127	US-ASCII (7-bit)
20261	T.61
20269	ISO 6937 Non-Spacing Accent
20273	IBM EBCDIC - Germany
20277	IBM EBCDIC - Denmark/Norway
20278	IBM EBCDIC - Finland/Sweden
20280	IBM EBCDIC - Italy
20284	IBM EBCDIC - Latin America/Spain
20285	IBM EBCDIC - United Kingdom
20290	IBM EBCDIC - Japanese Katakana Extended
20297	IBM EBCDIC - France
20420	IBM EBCDIC - Arabic
20423	IBM EBCDIC - Greek
20424	IBM EBCDIC - Hebrew
20833	IBM EBCDIC - Korean Extended
20838	IBM EBCDIC - Thai
20866	Russian - KOI8-R
20871	IBM EBCDIC - Icelandic
20880	IBM EBCDIC - Cyrillic (Russian)
20905	IBM EBCDIC - Turkish
20924	IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932	JIS X 0208-1990 & 0121-1990
20936	Simplified Chinese (GB2312)
21025	IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027	Extended Alpha Lowercase
21866	Ukrainian (KOI8-U)
28591	ISO 8859-1 Latin I
28592	ISO 8859-2 Central Europe
28593	ISO 8859-3 Latin 3
28594	ISO 8859-4 Baltic
28595	ISO 8859-5 Cyrillic
28596	ISO 8859-6 Arabic
28597	ISO 8859-7 Greek
28598	ISO 8859-8 Hebrew
28599	ISO 8859-9 Latin 5
28605	ISO 8859-15 Latin 9
29001	Europa 3
38598	ISO 8859-8 Hebrew
50220	ISO 2022 Japanese with no halfwidth Katakana
50221	ISO 2022 Japanese with halfwidth Katakana
50222	ISO 2022 Japanese JIS X 0201-1989
50225	ISO 2022 Korean
50227	ISO 2022 Simplified Chinese
50229	ISO 2022 Traditional Chinese
50930	Japanese (Katakana) Extended
50931	US/Canada and Japanese
50933	Korean Extended and Korean
50935	Simplified Chinese Extended and Simplified Chinese
50936	Simplified Chinese
50937	US/Canada and Traditional Chinese
50939	Japanese (Latin) Extended and Japanese
51932	EUC - Japanese
51936	EUC - Simplified Chinese
51949	EUC - Korean
51950	EUC - Traditional Chinese
52936	HZ-GB2312 Simplified Chinese
54936	Windows XP: GB18030 Simplified Chinese (4 Byte)
57002	ISCII Devanagari
57003	ISCII Bengali
57004	ISCII Tamil
57005	ISCII Telugu
57006	ISCII Assamese
57007	ISCII Oriya
57008	ISCII Kannada
57009	ISCII Malayalam
57010	ISCII Gujarati
57011	ISCII Punjabi
65000	Unicode UTF-7
65001	Unicode UTF-8

The following is a list of valid code page identifiers for Mac OS only:


Identifier	Name
1	ASCII
2	NEXTSTEP
3	JapaneseEUC
4	UTF8
5	ISOLatin1
6	Symbol
7	NonLossyASCII
8	ShiftJIS
9	ISOLatin2
10	Unicode
11	WindowsCP1251
12	WindowsCP1252
13	WindowsCP1253
14	WindowsCP1254
15	WindowsCP1250
21	ISO2022JP
30	MacOSRoman
10	UTF16String
0x90000100	UTF16BigEndian
0x94000100	UTF16LittleEndian
0x8c000100	UTF32String
0x98000100	UTF32BigEndian
0x9c000100	UTF32LittleEndian
65536	Proprietary

LicenseInfo: Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

Product: The product the license is for.
Product Key: The key the license was generated from.
License Source: Where the license was found (e.g., RuntimeLicense, License File).
License Type: The type of license installed (e.g., Royalty Free, Single Server).
Last Valid Build: The last valid build number for which the license will work.

MaskSensitiveData: Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to True to mask sensitive data. The default is True.

This setting only works on these components: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseInternalSecurityAPI: Whether or not to use the system security libraries or an internal implementation.

When set to False, the component will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to True tells the component to use the internal implementation instead of using the system security libraries.

This setting is set to False by default on all platforms.

Trappable Errors (Telnet Component)

Telnet Errors

118	Firewall error. Error message contains detailed description.
191	SubOption string too long. Truncated.
4001	Telnet protocol error. Invalid server response.

The component may also return one of the following error codes, which are inherited from other components.

TCPClient Errors

100	You cannot change the RemotePort at this time. A connection is in progress.
101	You cannot change the RemoteHost (Server) at this time. A connection is in progress.
102	The RemoteHost address is invalid (0.0.0.0).
104	Already connected. If you want to reconnect, close the current connection first.
106	You cannot change the LocalPort at this time. A connection is in progress.
107	You cannot change the LocalHost at this time. A connection is in progress.
112	You cannot change MaxLineLength at this time. A connection is in progress.
116	RemotePort cannot be zero. Please specify a valid service port number.
117	You cannot change the UseConnection option while the component is active.
135	Operation would block.
201	Timeout.
211	Action impossible in control's present state.
212	Action impossible while not connected.
213	Action impossible while listening.
301	Timeout.
302	Could not open file.
434	Unable to convert string to selected CodePage.
1105	Already connecting. If you want to reconnect, close the current connection first.
1117	You need to connect first.
1119	You cannot change the LocalHost at this time. A connection is in progress.
1120	Connection dropped by remote host.

SSL Errors

270	Cannot load specified security library.
271	Cannot open certificate store.
272	Cannot find specified certificate.
273	Cannot acquire security credentials.
274	Cannot find certificate chain.
275	Cannot verify certificate chain.
276	Error during handshake.
280	Error verifying certificate.
281	Could not find client certificate.
282	Could not find server certificate.
283	Error encrypting data.
284	Error decrypting data.

TCP/IP Errors

10004	[10004] Interrupted system call.
10009	[10009] Bad file number.
10013	[10013] Access denied.
10014	[10014] Bad address.
10022	[10022] Invalid argument.
10024	[10024] Too many open files.
10035	[10035] Operation would block.
10036	[10036] Operation now in progress.
10037	[10037] Operation already in progress.
10038	[10038] Socket operation on nonsocket.
10039	[10039] Destination address required.
10040	[10040] Message is too long.
10041	[10041] Protocol wrong type for socket.
10042	[10042] Bad protocol option.
10043	[10043] Protocol is not supported.
10044	[10044] Socket type is not supported.
10045	[10045] Operation is not supported on socket.
10046	[10046] Protocol family is not supported.
10047	[10047] Address family is not supported by protocol family.
10048	[10048] Address already in use.
10049	[10049] Cannot assign requested address.
10050	[10050] Network is down.
10051	[10051] Network is unreachable.
10052	[10052] Net dropped connection or reset.
10053	[10053] Software caused connection abort.
10054	[10054] Connection reset by peer.
10055	[10055] No buffer space available.
10056	[10056] Socket is already connected.
10057	[10057] Socket is not connected.
10058	[10058] Cannot send after socket shutdown.
10059	[10059] Too many references, cannot splice.
10060	[10060] Connection timed out.
10061	[10061] Connection refused.
10062	[10062] Too many levels of symbolic links.
10063	[10063] File name is too long.
10064	[10064] Host is down.
10065	[10065] No route to host.
10066	[10066] Directory is not empty
10067	[10067] Too many processes.
10068	[10068] Too many users.
10069	[10069] Disc Quota Exceeded.
10070	[10070] Stale NFS file handle.
10071	[10071] Too many levels of remote in path.
10091	[10091] Network subsystem is unavailable.
10092	[10092] WINSOCK DLL Version out of range.
10093	[10093] Winsock is not loaded yet.
11001	[11001] Host not found.
11002	[11002] Nonauthoritative 'Host not found' (try again or check DNS setup).
11003	[11003] Nonrecoverable errors: FORMERR, REFUSED, NOTIMP.
11004	[11004] Valid name, no data record (check DNS setup).