TCPServer Module

Properties Methods Events Config Settings Errors

The TCPServer Module is a generic Transmission Control Protocol (TCP) server module based on an asynchronous, event-driven architecture. It is designed to balance the load between connections for a fast, powerful server.

Syntax

IPWorks.TCPServer

Remarks

The TCPServer Class supports both plaintext and Secure Sockets Layer/Transport Layer Security (SSL/TLS) connections. When connecting over Secure Sockets Layer/Transport Layer Security (SSL/TLS) the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL-related settings are also supported through the Config method. The SSLCert properties are used to select a certificate for the server.

Note: A valid certificate MUST be selected before the server can function.

TCPServer is the server complement of TCPClient, which is used to create client applications. They share a common design philosophy and interface. We expect you will find TCPServer as easy to use as TCPClient.

By default, each instance of TCPServer can handle up to 1,000 simultaneous incoming connections. This number may be increased up to 100,000 or decreased to a lower value by using the MaxConnections configuration setting.

The connections are identified by a ConnectionId, an Id generated by the component to identify each connection. This Id is unique to each connection. TCPServer's events also have ConnectionId as a parameter to identify the connection they relate to.

Our main goal in designing TCPServer was to make it easy to use without sacrificing performance. The class has a minimum number of properties, and six events: ConnectionRequest, Connected, DataIn, Disconnected, ReadyToSend, and Error.

TCPServer can start to listen on a port by setting the Listening property to True. When a remote host asks for a connection, the ConnectionRequest event is fired. At that point, the connection can either be accepted or rejected. If the connection is accepted, a ConnectionId is assigned, and communication can start. From this point on, the operation is very similar to TCPClient. Data are sent by assigning the data string to the Text parameter of the Send method. The address and port of the incoming connection can be found by querying the RemoteHost and RemotePort properties.

Note: Server components are designed to process events as they occur. To ensure that events are processed in a timely manner, DoEvents should be called in a loop after the server is started.

Property List

The following is the full list of the properties of the module with short descriptions. Click on the links for further details.


ConnectionBacklog	This property includes the maximum number of pending connections maintained by the Transmission Control Protocol (TCP)/IP subsystem.
Connections	This property includes a collection of currently connected clients.
DefaultEOL	This property includes a default end-of-line (EOL) value to be used by incoming connections.
DefaultIdleTimeout	This property includes the default idle timeout for inactive clients.
DefaultMaxLineLength	The property includes the default maximum line length value for inbound connections.
DefaultSingleLineMode	This property tells the module whether or not to treat new connections as line oriented.
DefaultTimeout	This property includes an initial timeout value to be used by incoming connections.
KeepAlive	When True, KEEPALIVE packets are enabled (for long connections).
Linger	When set to True, connections are terminated gracefully.
Listening	This property indicates whether the module is listening for incoming connections on LocalPort.
LocalHost	The name of the local host or user-assigned IP interface through which connections are initiated or accepted.
LocalPort	This property includes the Transmission Control Protocol (TCP) port in the local host where the module listens.
SSLAuthenticateClients	If set to True, the server asks the client(s) for a certificate.
SSLCert	The certificate to be used during Secure Sockets Layer (SSL) negotiation.
SSLEnabled	This property indicates whether Transport Layer Security/Secure Sockets Layer (TLS/SSL) is enabled.
SSLProvider	The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.
SSLStartMode	This property determines how the module starts the Secure Sockets Layer (SSL) negotiation.

Method List

The following is the full list of the methods of the module with short descriptions. Click on the links for further details.


ChangeRecordLength	This method changes the length of received data records.
Config	Sets or retrieves a configuration setting.
Disconnect	This method disconnects the specified client.
DoEvents	This method processes events from the internal message queue.
Interrupt	This method interrupts a synchronous send to the remote host.
PauseData	This method pauses data reception.
ProcessData	This method reenables data reception after a call to PauseData .
Reset	This method will reset the module.
Send	This method sends binary data to the specified client.
SendBytes	This method sends binary data to the specified client.
SendFile	This method sends the file to the remote host.
SendLine	This method sends a string followed by a new line.
SendText	This method sends text to the specified client.
Shutdown	This method shuts down the server.
StartListening	This method starts listening for incoming connections.
StartSSL	This method starts the Secure Sockets Layer (SSL) negotiation on a connection.
StopListening	This method stops listening for new connections.

Event List

The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.


Connected	This event is fired immediately after a connection completes (or fails).
ConnectionRequest	This event is fired when a request for connection comes from a remote host.
DataIn	This event is fired when data come in.
Disconnected	This event is fired when a connection is closed.
Error	This event fires information about errors during data delivery.
ReadyToSend	This event is fired when the module is ready to send data.
SSLClientAuthentication	This event is fired when the client presents its credentials to the server.
SSLConnectionRequest	This event fires when a Secure Sockets Layer (SSL) connection is requested.
SSLStatus	This event is fired to show the progress of the secure connection.

Config Settings

The following is a list of config settings for the module with short descriptions. Click on the links for further details.


AllowedClients	A comma-separated list of host names or IP addresses that can access the module.
BindExclusively	Whether or not the module considers a local port reserved for exclusive use.
BlockedClients	A comma-separated list of host names or IP addresses that cannot access the module.
DefaultConnectionTimeout	The inactivity timeout applied to the SSL handshake.
InBufferSize	The size in bytes of the incoming queue of the socket.
KeepAliveInterval	The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTime	The inactivity time in milliseconds before a TCP keep-alive packet is sent.
MaxConnections	The maximum number of connections available.
OutBufferSize	The size in bytes of the outgoing queue of the socket.
TcpNoDelay	Whether or not to delay when sending packets.
UseIPv6	Whether to use IPv6.
LogSSLPackets	Controls whether SSL packets are logged when using the internal security API.
OpenSSLCADir	The path to a directory containing CA certificates.
OpenSSLCAFile	Name of the file containing the list of CA's trusted by your application.
OpenSSLCipherList	A string that controls the ciphers to be used by SSL.
OpenSSLPrngSeedData	The data to seed the pseudo random number generator (PRNG).
ReuseSSLSession	Determines if the SSL session is reused.
SSLCACerts	A newline separated list of CA certificates to be included when performing an SSL handshake.
SSLCheckCRL	Whether to check the Certificate Revocation List for the server certificate.
SSLCheckOCSP	Whether to use OCSP to check the status of the server certificate.
SSLCipherStrength	The minimum cipher strength used for bulk encryption.
SSLClientCACerts	A newline separated list of CA certificates to use during SSL client certificate validation.
SSLEnabledCipherSuites	The cipher suite to be used in an SSL negotiation.
SSLEnabledProtocols	Used to enable/disable the supported security protocols.
SSLEnableRenegotiation	Whether the renegotiation_info SSL extension is supported.
SSLIncludeCertChain	Whether the entire certificate chain is included in the SSLServerAuthentication event.
SSLKeyLogFile	The location of a file where per-session secrets are written for debugging purposes.
SSLNegotiatedCipher	Returns the negotiated cipher suite.
SSLNegotiatedCipherStrength	Returns the negotiated cipher suite strength.
SSLNegotiatedCipherSuite	Returns the negotiated cipher suite.
SSLNegotiatedKeyExchange	Returns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrength	Returns the negotiated key exchange algorithm strength.
SSLNegotiatedVersion	Returns the negotiated protocol version.
SSLSecurityFlags	Flags that control certificate verification.
SSLServerCACerts	A newline separated list of CA certificates to use during SSL server certificate validation.
TLS12SignatureAlgorithms	Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.
TLS12SupportedGroups	The supported groups for ECC.
TLS13KeyShareGroups	The groups for which to pregenerate key shares.
TLS13SignatureAlgorithms	The allowed certificate signature algorithms.
TLS13SupportedGroups	The supported groups for (EC)DHE key exchange.
BuildInfo	Information about the product's build.
CodePage	The system code page used for Unicode to Multibyte translations.
LicenseInfo	Information about the current license.
MaskSensitiveData	Whether sensitive data is masked in log messages.
UseInternalSecurityAPI	Whether or not to use the system security libraries or an internal implementation.

ConnectionBacklog Property (TCPServer Module)

This property includes the maximum number of pending connections maintained by the Transmission Control Protocol (TCP)/IP subsystem.

public var connectionBacklog: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=connectionBacklog,setter=setConnectionBacklog:) int connectionBacklog;

- (int)connectionBacklog;
- (void)setConnectionBacklog :(int)newConnectionBacklog;

Default Value

Remarks

This property contains the maximum number of pending connections maintained by the TCP/IP subsystem. This value reflects the SOMAXCONN option for the main listening socket. The default value for most systems is 5. You may set this property to a larger value if the server is expected to receive a large number of connections, and queuing them is desirable.

Connections Property (TCPServer Module)

This property includes a collection of currently connected clients.

Syntax

Swift
Objective-C

public var connections: [Int32: Connection] {
  get {...}
}


@property (nonatomic,readonly,assign,getter=connectionCount) int connectionCount;

- (int)connectionCount;

- (BOOL)acceptData:(int)connectionId;

- (int)bytesSent:(int)connectionId;

- (BOOL)connected:(int)connectionId;

- (int)connectionId:(int)connectionId;

- (NSString*)EOL:(int)connectionId;
- (void)setEOL:(int)connectionId :(NSString*)newEOL;

- (NSData*)EOLB:(int)connectionId;
- (void)setEOLB:(int)connectionId :(NSData*)newEOL;
- (int)idleTimeout:(int)connectionId;
- (void)setIdleTimeout:(int)connectionId :(int)newIdleTimeout;

- (NSString*)localAddress:(int)connectionId;

- (BOOL)readyToSend:(int)connectionId;

- (int)recordLength:(int)connectionId;

- (NSString*)remoteHost:(int)connectionId;

- (int)remotePort:(int)connectionId;

- (BOOL)singleLineMode:(int)connectionId;
- (void)setSingleLineMode:(int)connectionId :(BOOL)newSingleLineMode;

- (int)timeout:(int)connectionId;
- (void)setTimeout:(int)connectionId :(int)newTimeout;

- (NSString*)userData:(int)connectionId;
- (void)setUserData:(int)connectionId :(NSString*)newUserData;

- (NSData*)userDataB:(int)connectionId;
- (void)setUserDataB:(int)connectionId :(NSData*)newUserData;

Default Value

Remarks

This property contains a collection of currently connected clients. All of the connections may be managed using this property. Each connection is described by the different fields of the Connection type.

This collection is a hash-table type of collection, in which the Connection Id string is used as the key to the desired connection. You may acquire the key for a given connection through the Connected event.

Example (Broadcasting Data) For i = 0 to Control.ConnectionCount Control.DataToSend(Control.ConnectionId(i)) = "Broadcast Data" Next i

DefaultEOL Property (TCPServer Module)

This property includes a default end-of-line (EOL) value to be used by incoming connections.

Syntax

Swift
Objective-C

public var defaultEOL: String {
  get {...}
  set {...}
}

public var defaultEOLB: Data {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=defaultEOL,setter=setDefaultEOL:) NSString* defaultEOL;

- (NSString*)defaultEOL;
- (void)setDefaultEOL :(NSString*)newDefaultEOL;

@property (nonatomic,readwrite,assign,getter=defaultEOLB,setter=setDefaultEOLB:) NSData* defaultEOLB;

- (NSData*)defaultEOLB;
- (void)setDefaultEOLB :(NSData*)newDefaultEOL;

Default Value

Remarks

This property contains a default end-of-line (EOL) value to be used by incoming connections. Once the class accepts and establishes an inbound connection, it will set that connection's EOL to the value in this property. By default, this value is empty (""), meaning that data will be fired as it is received.

DefaultIdleTimeout Property (TCPServer Module)

This property includes the default idle timeout for inactive clients.

Syntax

Swift
Objective-C

public var defaultIdleTimeout: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=defaultIdleTimeout,setter=setDefaultIdleTimeout:) int defaultIdleTimeout;

- (int)defaultIdleTimeout;
- (void)setDefaultIdleTimeout :(int)newDefaultIdleTimeout;

Default Value

Remarks

This property specifies the idle timeout (in seconds) for clients. When set to a positive value, the class will disconnect idle clients after the specified timeout.

This applies only to clients that have not sent or received data within DefaultIdleTimeout seconds.

If set to 0 (default), no idle timeout is applied.

Note: DoEvents must be called for the class to check existing connections.

DefaultMaxLineLength Property (TCPServer Module)

The property includes the default maximum line length value for inbound connections.

Syntax

Swift
Objective-C

public var defaultMaxLineLength: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=defaultMaxLineLength,setter=setDefaultMaxLineLength:) int defaultMaxLineLength;

- (int)defaultMaxLineLength;
- (void)setDefaultMaxLineLength :(int)newDefaultMaxLineLength;

Default Value

2048

Remarks

This property controls the default size of an internal buffer that holds received data while waiting for an end-of-line (EOL) string.

The minimum value for this property is 256 bytes. The default value is 2048 bytes.

DefaultSingleLineMode Property (TCPServer Module)

This property tells the module whether or not to treat new connections as line oriented.

Syntax

Swift
Objective-C

public var defaultSingleLineMode: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=defaultSingleLineMode,setter=setDefaultSingleLineMode:) BOOL defaultSingleLineMode;

- (BOOL)defaultSingleLineMode;
- (void)setDefaultSingleLineMode :(BOOL)newDefaultSingleLineMode;

Default Value

False

Remarks

This property instructs the component whether or not to treat newly established connections as line-oriented protocols. If this value is True, newly accepted connections will read the incoming data stream as lines separated by a carriage return line feed (CRLF), carriage return (CR), or line feed (LF) and will ignore the end of lines (EOLs).

DefaultTimeout Property (TCPServer Module)

This property includes an initial timeout value to be used by incoming connections.

Syntax

Swift
Objective-C

public var defaultTimeout: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=defaultTimeout,setter=setDefaultTimeout:) int defaultTimeout;

- (int)defaultTimeout;
- (void)setDefaultTimeout :(int)newDefaultTimeout;

Default Value

Remarks

This property is used by the class to set the operational timeout value of all inbound connections once they are established.

By default, the timeout is 0, meaning that all inbound connections will behave asynchronously.

KeepAlive Property (TCPServer Module)

When True, KEEPALIVE packets are enabled (for long connections).

Syntax

Swift
Objective-C

public var keepAlive: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=keepAlive,setter=setKeepAlive:) BOOL keepAlive;

- (BOOL)keepAlive;
- (void)setKeepAlive :(BOOL)newKeepAlive;

Default Value

False

Remarks

This property enables the SO_KEEPALIVE option on the incoming connections. This option prevents long connections from timing out in case of inactivity.

Note: System Transmission Control Protocol (TCP)/IP stack implementations are not required to support SO_KEEPALIVE.

This property is shared among incoming connections. When the property is set, the corresponding value is set for incoming connections as they are accepted. Existing connections are not modified.

Linger Property (TCPServer Module)

When set to True, connections are terminated gracefully.

Syntax

Swift
Objective-C

public var linger: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=linger,setter=setLinger:) BOOL linger;

- (BOOL)linger;
- (void)setLinger :(BOOL)newLinger;

Default Value

True

Remarks

This property controls how a connection is closed. The default is True. In this case, the connection is closed only after all the data are sent. Setting it to False forces an abrupt (hard) disconnection. Any data that were in the sending queue may be lost.

The default behavior (which is also the default mode for stream sockets) might result in an indefinite delay in closing the connection. Although the class returns control immediately, the system might indefinitely hold system resources until all pending data are sent (even after your application closes). This means that valuable system resources might be wasted.

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you have sent (e.g., by a client acknowledgment), then setting this property to False might be the appropriate course of action.

This property is shared among incoming connections. When the property is set, the corresponding value is set for incoming connections as they are accepted. Existing connections are not modified.

Listening Property (TCPServer Module)

This property indicates whether the module is listening for incoming connections on LocalPort.

Syntax

Swift
Objective-C

public var listening: Bool {
  get {...}
}


@property (nonatomic,readonly,assign,getter=listening) BOOL listening;

- (BOOL)listening;

Default Value

False

Remarks

This property indicates whether the class is listening for connections on the port specified by the LocalPort property. Use the StartListening and StopListening methods to control whether the class is listening.

This property is read-only.

If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:

public func setListening(listening: Bool) throws

LocalHost Property (TCPServer Module)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

Swift
Objective-C

public var localHost: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=localHost,setter=setLocalHost:) NSString* localHost;

- (NSString*)localHost;
- (void)setLocalHost :(NSString*)newLocalHost;

Default Value

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

LocalPort Property (TCPServer Module)

This property includes the Transmission Control Protocol (TCP) port in the local host where the module listens.

Syntax

Swift
Objective-C

public var localPort: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=localPort,setter=setLocalPort:) int localPort;

- (int)localPort;
- (void)setLocalPort :(int)newLocalPort;

Default Value

Remarks

This property must be set before the class can start listening. If its value is 0, then the TCP/IP subsystem picks a port number at random. The port number can be found by checking the value of this property after the class is listening (i.e., after successfully assigning True to the Listening property).

The service port is not shared among servers so two classs cannot be listening on the same port at the same time.

SSLAuthenticateClients Property (TCPServer Module)

If set to True, the server asks the client(s) for a certificate.

Syntax

Swift
Objective-C

public var sslAuthenticateClients: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=SSLAuthenticateClients,setter=setSSLAuthenticateClients:) BOOL SSLAuthenticateClients;

- (BOOL)SSLAuthenticateClients;
- (void)setSSLAuthenticateClients :(BOOL)newSSLAuthenticateClients;

Default Value

False

Remarks

This property is used in conjunction with the SSLClientAuthentication event. Please refer to the documentation of the SSLClientAuthentication event for details.

SSLCert Property (TCPServer Module)

The certificate to be used during Secure Sockets Layer (SSL) negotiation.

Syntax

Swift
Objective-C

public var sslCert: Certificate {
  get {...}
  set {...}
}


@property (nonatomic,readonly,assign,getter=SSLCertEffectiveDate) NSString* SSLCertEffectiveDate;

- (NSString*)SSLCertEffectiveDate;

@property (nonatomic,readonly,assign,getter=SSLCertExpirationDate) NSString* SSLCertExpirationDate;

- (NSString*)SSLCertExpirationDate;

@property (nonatomic,readonly,assign,getter=SSLCertExtendedKeyUsage) NSString* SSLCertExtendedKeyUsage;

- (NSString*)SSLCertExtendedKeyUsage;

@property (nonatomic,readonly,assign,getter=SSLCertFingerprint) NSString* SSLCertFingerprint;

- (NSString*)SSLCertFingerprint;

@property (nonatomic,readonly,assign,getter=SSLCertFingerprintSHA1) NSString* SSLCertFingerprintSHA1;

- (NSString*)SSLCertFingerprintSHA1;

@property (nonatomic,readonly,assign,getter=SSLCertFingerprintSHA256) NSString* SSLCertFingerprintSHA256;

- (NSString*)SSLCertFingerprintSHA256;

@property (nonatomic,readonly,assign,getter=SSLCertIssuer) NSString* SSLCertIssuer;

- (NSString*)SSLCertIssuer;

@property (nonatomic,readonly,assign,getter=SSLCertPrivateKey) NSString* SSLCertPrivateKey;

- (NSString*)SSLCertPrivateKey;

@property (nonatomic,readonly,assign,getter=SSLCertPrivateKeyAvailable) BOOL SSLCertPrivateKeyAvailable;

- (BOOL)SSLCertPrivateKeyAvailable;

@property (nonatomic,readonly,assign,getter=SSLCertPrivateKeyContainer) NSString* SSLCertPrivateKeyContainer;

- (NSString*)SSLCertPrivateKeyContainer;

@property (nonatomic,readonly,assign,getter=SSLCertPublicKey) NSString* SSLCertPublicKey;

- (NSString*)SSLCertPublicKey;

@property (nonatomic,readonly,assign,getter=SSLCertPublicKeyAlgorithm) NSString* SSLCertPublicKeyAlgorithm;

- (NSString*)SSLCertPublicKeyAlgorithm;

@property (nonatomic,readonly,assign,getter=SSLCertPublicKeyLength) int SSLCertPublicKeyLength;

- (int)SSLCertPublicKeyLength;

@property (nonatomic,readonly,assign,getter=SSLCertSerialNumber) NSString* SSLCertSerialNumber;

- (NSString*)SSLCertSerialNumber;

@property (nonatomic,readonly,assign,getter=SSLCertSignatureAlgorithm) NSString* SSLCertSignatureAlgorithm;

- (NSString*)SSLCertSignatureAlgorithm;

@property (nonatomic,readwrite,assign,getter=SSLCertStore,setter=setSSLCertStore:) NSString* SSLCertStore;

- (NSString*)SSLCertStore;
- (void)setSSLCertStore :(NSString*)newSSLCertStore;

@property (nonatomic,readwrite,assign,getter=SSLCertStoreB,setter=setSSLCertStoreB:) NSData* SSLCertStoreB;

- (NSData*)SSLCertStoreB;
- (void)setSSLCertStoreB :(NSData*)newSSLCertStore;
@property (nonatomic,readwrite,assign,getter=SSLCertStorePassword,setter=setSSLCertStorePassword:) NSString* SSLCertStorePassword;

- (NSString*)SSLCertStorePassword;
- (void)setSSLCertStorePassword :(NSString*)newSSLCertStorePassword;

@property (nonatomic,readwrite,assign,getter=SSLCertStoreType,setter=setSSLCertStoreType:) int SSLCertStoreType;

- (int)SSLCertStoreType;
- (void)setSSLCertStoreType :(int)newSSLCertStoreType;

@property (nonatomic,readonly,assign,getter=SSLCertSubjectAltNames) NSString* SSLCertSubjectAltNames;

- (NSString*)SSLCertSubjectAltNames;

@property (nonatomic,readonly,assign,getter=SSLCertThumbprintMD5) NSString* SSLCertThumbprintMD5;

- (NSString*)SSLCertThumbprintMD5;

@property (nonatomic,readonly,assign,getter=SSLCertThumbprintSHA1) NSString* SSLCertThumbprintSHA1;

- (NSString*)SSLCertThumbprintSHA1;

@property (nonatomic,readonly,assign,getter=SSLCertThumbprintSHA256) NSString* SSLCertThumbprintSHA256;

- (NSString*)SSLCertThumbprintSHA256;

@property (nonatomic,readonly,assign,getter=SSLCertUsage) NSString* SSLCertUsage;

- (NSString*)SSLCertUsage;

@property (nonatomic,readonly,assign,getter=SSLCertUsageFlags) int SSLCertUsageFlags;

- (int)SSLCertUsageFlags;

@property (nonatomic,readonly,assign,getter=SSLCertVersion) NSString* SSLCertVersion;

- (NSString*)SSLCertVersion;

@property (nonatomic,readwrite,assign,getter=SSLCertSubject,setter=setSSLCertSubject:) NSString* SSLCertSubject;

- (NSString*)SSLCertSubject;
- (void)setSSLCertSubject :(NSString*)newSSLCertSubject;

@property (nonatomic,readwrite,assign,getter=SSLCertEncoded,setter=setSSLCertEncoded:) NSString* SSLCertEncoded;

- (NSString*)SSLCertEncoded;
- (void)setSSLCertEncoded :(NSString*)newSSLCertEncoded;

@property (nonatomic,readwrite,assign,getter=SSLCertEncodedB,setter=setSSLCertEncodedB:) NSData* SSLCertEncodedB;

- (NSData*)SSLCertEncodedB;
- (void)setSSLCertEncodedB :(NSData*)newSSLCertEncoded;

Default Value

Remarks

This property includes the digital certificate that the class will use during SSL negotiation. Set this property to a valid certificate before starting SSL negotiation. To set a certificate, you may set the field to the encoded certificate. To select a certificate, use the store and subject fields.

SSLEnabled Property (TCPServer Module)

This property indicates whether Transport Layer Security/Secure Sockets Layer (TLS/SSL) is enabled.

Syntax

Swift
Objective-C

public var sslEnabled: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=SSLEnabled,setter=setSSLEnabled:) BOOL SSLEnabled;

- (BOOL)SSLEnabled;
- (void)setSSLEnabled :(BOOL)newSSLEnabled;

Default Value

False

Remarks

This property specifies whether TLS/SSL is enabled in the class. When False (default), the class operates in plaintext mode. When True, TLS/SSL is enabled.

TLS/SSL may also be enabled by setting SSLStartMode. Setting SSLStartMode will automatically update this property value.

SSLProvider Property (TCPServer Module)

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax

Swift
Objective-C

public var sslProvider: TCPServerSSLProviders {
  get {...}
  set {...}
}

public enum TCPServerSSLProviders: Int32 {
  case sslpAutomatic = 0
  case sslpPlatform = 1
  case sslpInternal = 2
}


@property (nonatomic,readwrite,assign,getter=SSLProvider,setter=setSSLProvider:) int SSLProvider;

- (int)SSLProvider;
- (void)setSSLProvider :(int)newSSLProvider;

Default Value

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:


0 (sslpAutomatic - default)	Automatically selects the appropriate implementation.
1 (sslpPlatform)	Uses the platform/system implementation.
2 (sslpInternal)	Uses the internal implementation.

Additional Notes

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected, the platform implementation will be used by default in all cases in the macOS edition.

SSLStartMode Property (TCPServer Module)

This property determines how the module starts the Secure Sockets Layer (SSL) negotiation.

Syntax

Swift
Objective-C

public var sslStartMode: TCPServerSSLStartModes {
  get {...}
  set {...}
}

public enum TCPServerSSLStartModes: Int32 {
  case sslAutomatic = 0
  case sslImplicit = 1
  case sslExplicit = 2
  case sslNone = 3
}


@property (nonatomic,readwrite,assign,getter=SSLStartMode,setter=setSSLStartMode:) int SSLStartMode;

- (int)SSLStartMode;
- (void)setSSLStartMode :(int)newSSLStartMode;

Default Value

Remarks

The SSLStartMode property may have one of the following values:


0 (sslAutomatic)	If the remote port is set to the standard plaintext port of the protocol (where applicable), the class will behave the same as if SSLStartMode is set to sslExplicit. In all other cases, SSL negotiation will be implicit (sslImplicit).
1 (sslImplicit)	The SSL negotiation will start immediately after the connection is established.
2 (sslExplicit)	The class will first connect in plaintext, and then will explicitly start SSL negotiation through a protocol command such as STARTTLS.
3 (sslNone - default)	No SSL negotiation; no SSL security. All communication will be in plaintext mode.

ChangeRecordLength Method (TCPServer Module)

This method changes the length of received data records.

Syntax

Swift
Objective-C

public func changeRecordLength(connectionId: Int32, recordLength: Int32) throws -> Void

- (void)changeRecordLength:(int)connectionId :(int)recordLength;

Remarks

This method defines the length of data records to be received (in bytes) for the specified ConnectionId.

If RecordLength is set to a positive value, the class will accumulate data until RecordLength bytes of data are received and only then will fire the DataIn event with data of the specified length RecordLength. This allows data to be received as records of known length. This method can be called at any time to change the record length, including within the DataIn event.

A value of 0 (default) means this functionality is not used.

Config Method (TCPServer Module)

Sets or retrieves a configuration setting.

Syntax

Swift
Objective-C

public func config(configurationString: String) throws -> String

- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Disconnect Method (TCPServer Module)

This method disconnects the specified client.

Syntax

Swift
Objective-C

public func disconnect(connectionId: Int32) throws -> Void

- (void)disconnect:(int)connectionId;

Remarks

Calling this method will disconnect the client specified by the ConnectionId parameter.

DoEvents Method (TCPServer Module)

This method processes events from the internal message queue.

Syntax

Swift
Objective-C

public func doEvents() throws -> Void

- (void)doEvents;

Remarks

When DoEvents is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.

Interrupt Method (TCPServer Module)

This method interrupts a synchronous send to the remote host.

Syntax

Swift
Objective-C

public func interrupt(connectionId: Int32) throws -> Void

- (void)interrupt:(int)connectionId;

Remarks

This property is called using the Connection Id if you wish to interrupt a connection and stop a file from uploading without disconnecting the client connected to the class. If you use SendFile to upload a file, the class will run synchronously on that Connection Id until it is completed.

PauseData Method (TCPServer Module)

This method pauses data reception.

Syntax

Swift
Objective-C

public func pauseData(connectionId: Int32) throws -> Void

- (void)pauseData:(int)connectionId;

Remarks

This method pauses data reception for the connection identified by ConnectionId when called. While data reception is paused, the DataIn event will not fire for the specified connection. Call ProcessData to reenable data reception.

ProcessData Method (TCPServer Module)

This method reenables data reception after a call to PauseData .

Syntax

Swift
Objective-C

public func processData(connectionId: Int32) throws -> Void

- (void)processData:(int)connectionId;

Remarks

This method reenables data reception for the connection identified by ConnectionId after a previous call to PauseData. When PauseData is called, the DataIn event will not fire for the specified connection. To reenable data reception and allow DataIn to fire, call this method.

Note: This method is used only after previously calling PauseData. It does not need to be called to process incoming data by default.

Reset Method (TCPServer Module)

This method will reset the component.

Syntax

Swift
Objective-C

public func reset() throws -> Void

- (void)reset;

Remarks

This method will reset the class's properties to their default values.

Send Method (TCPServer Module)

This method sends binary data to the specified client.

Syntax

Swift
Objective-C

public func send(connectionId: Int32, text: Data) throws -> Void

- (void)send:(int)connectionId :(NSData*)text;

Remarks

This method sends binary data to the client identified by ConnectionId. To send text, use the SendText method instead.

When ConnectionsTimeout is set to 0, the class will behave asynchronously. If you are sending data to the remote host faster than it can process it, or faster than the network's bandwidth allows, the outgoing queue might fill up. When this happens, the operation . The BytesSent property shows how many bytes were sent (if any). If 0 bytes were sent, then you can wait for the ReadyToSend event before attempting to send data again.

Note: The ReadyToSend event is not fired when part of the data is sent successfully.

SendBytes Method (TCPServer Module)

This method sends binary data to the specified client.

Syntax

Swift
Objective-C

public func sendBytes(connectionId: Int32, data: Data) throws -> Void

- (void)sendBytes:(int)connectionId :(NSData*)data;

Remarks

This method sends binary data to the client identified by ConnectionId. To send text, use the SendText method instead.

Note: The ReadyToSend event is not fired when part of the data is sent successfully.

SendFile Method (TCPServer Module)

This method sends the file to the remote host.

Syntax

Swift
Objective-C

public func sendFile(connectionId: Int32, fileName: String) throws -> Void

- (void)sendFile:(int)connectionId :(NSString*)fileName;

Remarks

This method sends the file to the client specified by the ConnectionId.

SendLine Method (TCPServer Module)

This method sends a string followed by a new line.

Syntax

Swift
Objective-C

public func sendLine(connectionId: Int32, text: String) throws -> Void

- (void)sendLine:(int)connectionId :(NSString*)text;

Remarks

This method is used to send data with line-oriented protocols. The line is followed by .

Please refer to the GetLine method and SingleLineMode property for more information.

SendText Method (TCPServer Module)

This method sends text to the specified client.

Syntax

Swift
Objective-C

public func sendText(connectionId: Int32, text: String) throws -> Void

- (void)sendText:(int)connectionId :(NSString*)text;

Remarks

This method sends text to the client identified by ConnectionId. To send binary data, use the SendBytes method instead.

Note: The ReadyToSend event is not fired when part of the data is sent successfully.

Shutdown Method (TCPServer Module)

This method shuts down the server.

Syntax

Swift
Objective-C

public func shutdown() throws -> Void

- (void)shutdown;

Remarks

This method shuts down the server. Calling this method is equivalent to calling StopListening and then breaking every client connection by calling Disconnect.

StartListening Method (TCPServer Module)

This method starts listening for incoming connections.

Syntax

Swift
Objective-C

public func startListening() throws -> Void

- (void)startListening;

Remarks

This method begins listening for incoming connections on the port specified by LocalPort. Once listening, events will fire as new clients connect and data are transferred.

To stop listening for new connections, call StopListening. To stop listening for new connections and to disconnect all existing clients, call Shutdown.

StartSSL Method (TCPServer Module)

This method starts the Secure Sockets Layer (SSL) negotiation on a connection.

Syntax

Swift
Objective-C

public func startSSL(connectionId: Int32) throws -> Void

- (void)startSSL:(int)connectionId;

Remarks

This method is used to start the SSL negotiation on a plaintext connection. Please refer to the SSLStartMode property for more information.

Note: The Connected event will fire again after the SSL negotiation is complete.

StopListening Method (TCPServer Module)

This method stops listening for new connections.

Syntax

Swift
Objective-C

public func stopListening() throws -> Void

- (void)stopListening;

Remarks

This method stops listening for new connections. After being called, any new connection attempts will be rejected. Calling this method does not disconnect existing connections.

To stop listening and to disconnect all existing clients, call Shutdown instead.

Connected Event (TCPServer Module)

This event is fired immediately after a connection completes (or fails).

Syntax

Swift
Objective-C

func onConnected(connectionId: Int32, statusCode: Int32, description: String)

- (void)onConnected:(int)connectionId :(int)statusCode :(NSString*)description;

Remarks

If the connection is made normally, StatusCode is 0, and Description is "OK".

If the connection fails, StatusCode has the error code returned by the system. Description contains a description of this code. The value of StatusCode is equal to the value of the system error.

Please refer to the Error Codes section for more information.

ConnectionRequest Event (TCPServer Module)

This event is fired when a request for connection comes from a remote host.

Syntax

Swift
Objective-C

func onConnectionRequest(address: String, port: Int32, accept: inout Bool)

- (void)onConnectionRequest:(NSString*)address :(int)port :(int*)accept;

Remarks

This event indicates an incoming connection. The connection is accepted by default. Address and Port will contain information about the remote host requesting the inbound connection. If you want to refuse it, you can set the Accept parameter to False.

DataIn Event (TCPServer Module)

This event is fired when data come in.

Syntax

Swift
Objective-C

func onDataIn(connectionId: Int32, text: Data, eol: Bool)

- (void)onDataIn:(int)connectionId :(NSData*)text :(BOOL)EOL;

Remarks

Trapping the DataIn event is your only chance to get the data coming from the other end of the connection specified by ConnectionId. The incoming data are provided through the Text parameter.

EOL indicates whether or not the EOL string was found at the end of Text. If the EOL string was found, then EOL is True.

If Text is part of the data portion of length larger than either DefaultMaxLineLength or with no EOL strings in it, then EOL is False. Please note that this means that one or more DataIn events with EOL set to False can be received during a connection.

If the EOL property is "" (empty string), then EOL can be disregarded (it is always True).

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Disconnected Event (TCPServer Module)

This event is fired when a connection is closed.

Syntax

Swift
Objective-C

func onDisconnected(connectionId: Int32, statusCode: Int32, description: String)

- (void)onDisconnected:(int)connectionId :(int)statusCode :(NSString*)description;

Remarks

If the connection is broken normally, StatusCode is 0, and Description is "OK".

If the connection is broken for any other reason, StatusCode has the error code returned by the system. Description contains a description of this code. The value of StatusCode is equal to the value of the system error.

Please refer to the Error Codes section for more information.

Error Event (TCPServer Module)

This event fires information about errors during data delivery.

Syntax

Swift
Objective-C

func onError(connectionId: Int32, errorCode: Int32, description: String)

- (void)onError:(int)connectionId :(int)errorCode :(NSString*)description;

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally, the class .

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

ConnectionId indicates the connection for which the error is applicable.

ReadyToSend Event (TCPServer Module)

This event is fired when the component is ready to send data.

Syntax

Swift
Objective-C

func onReadyToSend(connectionId: Int32)

- (void)onReadyToSend:(int)connectionId;

Remarks

The ReadyToSend event indicates that the underlying Transmission Control Protocol (TCP)/IP subsystem is ready to accept data after a failed Send. This event is also fired immediately after a connection is established.

SSLClientAuthentication Event (TCPServer Module)

This event is fired when the client presents its credentials to the server.

Syntax

Swift
Objective-C

func onSSLClientAuthentication(connectionId: Int32, certEncoded: Data, certSubject: String, certIssuer: String, status: String, accept: inout Bool)

- (void)onSSLClientAuthentication:(int)connectionId :(NSData*)certEncoded :(NSString*)certSubject :(NSString*)certIssuer :(NSString*)status :(int*)accept;

Remarks

This event enables the server to decide whether or not to continue. The Accept parameter is a recommendation on whether to continue or to close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string "OK").

SSLConnectionRequest Event (TCPServer Module)

This event fires when a Secure Sockets Layer (SSL) connection is requested.

Syntax

Swift
Objective-C

func onSSLConnectionRequest(connectionId: Int32, supportedCipherSuites: String, supportedSignatureAlgs: String, certStoreType: inout Int32, certStore: inout String, certPassword: inout String, certSubject: inout String)

- (void)onSSLConnectionRequest:(int)connectionId :(NSString*)supportedCipherSuites :(NSString*)supportedSignatureAlgs :(int*)certStoreType :(NSString**)certStore :(NSString**)certPassword :(NSString**)certSubject;

Remarks

This event fires when an SSL connection is requested and SSLProvider is set to Internal. This event provides an opportunity to select an alternative certificate to the connecting client. This event does not fire when SSLProvider is set to Platform.

This event allows the class to be configured to use both RSA and ECDSA certificates depending on the connecting client's capabilities.

ConnectionId is the connection Id of the client requesting the connection.

SupportedCipherSuites is a comma-separated list of cipher suites that the client supports.

SupportedSignatureAlgs is a comma-separated list of certificate signature algorithms that the client supports.

CertStoreType is the store type of the alternate certificate to use for this connection. The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: This store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: This store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: This store type is only available in Java and .NET.
23 (cstPKCS11)	The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to `cstPKCS11`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the and set to the PIN. Code Example. SSH Authentication with Security Key: `certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

CertStore is the store name or location of the alternate certificate to use for this connection.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

CertPassword is the password of the certificate store containing the alternate certificate to use for this connection.

CertSubject is the subject of the alternate certificate to use for this connection.

The special value * matches any subject and will select the first certificate in the store. The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:


Field	Meaning
CN	Common Name. This is commonly a hostname like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

SSLStatus Event (TCPServer Module)

This event is fired to show the progress of the secure connection.

Syntax

Swift
Objective-C

func onSSLStatus(connectionId: Int32, message: String)

- (void)onSSLStatus:(int)connectionId :(NSString*)message;

Remarks

The event is fired for informational and logging purposes only. It is used to track the progress of the connection.

Certificate Type

This is the digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

The following fields are available:

Fields

effectiveDate
String (read-only)
Default Value: ""

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

expirationDate
String (read-only)
Default Value: ""

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

extendedKeyUsage
String (read-only)
Default Value: ""

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

fingerprint
String (read-only)
Default Value: ""

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

fingerprintSHA1
String (read-only)
Default Value: ""

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

fingerprintSHA256
String (read-only)
Default Value: ""

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

issuer
String (read-only)
Default Value: ""

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

privateKey
String (read-only)
Default Value: ""

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The may be available but not exportable. In this case, returns an empty string.

privateKeyAvailable
Bool (read-only)
Default Value: False

Whether a is available for the selected certificate. If is True, the certificate may be used for authentication purposes (e.g., server authentication).

privateKeyContainer
String (read-only)
Default Value: ""

The name of the container for the certificate (if available). This functionality is available only on Windows platforms.

publicKey
String (read-only)
Default Value: ""

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

publicKeyAlgorithm
String (read-only)
Default Value: ""

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

publicKeyLength
Int32 (read-only)
Default Value: 0

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

serialNumber
String (read-only)
Default Value: ""

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

signatureAlgorithm
String (read-only)
Default Value: ""

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

storeB
Data
Default Value: "MY"

The name of the certificate store for the client certificate.

The property denotes the type of the certificate store specified by . If the store is password-protected, specify the password in .

is used in conjunction with the property to specify client certificates. If has a value, and or is set, a search for a certificate is initiated. Please see the property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

store
String
Default Value: "MY"

The name of the certificate store for the client certificate.

The property denotes the type of the certificate store specified by . If the store is password-protected, specify the password in .

is used in conjunction with the property to specify client certificates. If has a value, and or is set, a search for a certificate is initiated. Please see the property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

storePassword
String
Default Value: ""

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

storeType
CertStoreTypes
Default Value: 0

The type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: This store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: This store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: This store type is only available in Java and .NET.
23 (cstPKCS11)	The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to `cstPKCS11`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the and set to the PIN. Code Example. SSH Authentication with Security Key: `certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

subjectAltNames
String (read-only)
Default Value: ""

Comma-separated lists of alternative subject names for the certificate.

thumbprintMD5
String (read-only)
Default Value: ""

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

thumbprintSHA1
String (read-only)
Default Value: ""

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

thumbprintSHA256
String (read-only)
Default Value: ""

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

usage
String (read-only)
Default Value: ""

The text description of .

This value will be one or more of the following strings and will be separated by commas:

Digital Signature
Non-Repudiation
Key Encipherment
Data Encipherment
Key Agreement
Certificate Signing
CRL Signing
Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

usageFlags
Int32 (read-only)
Default Value: 0

The flags that show intended use for the certificate. The value of is a combination of the following flags:


0x80	Digital Signature
0x40	Non-Repudiation
0x20	Key Encipherment
0x10	Data Encipherment
0x08	Key Agreement
0x04	Certificate Signing
0x02	CRL Signing
0x01	Encipher Only

Please see the property for a text representation of .

This functionality currently is not available when the provider is OpenSSL.

version
String (read-only)
Default Value: ""

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

subject
String
Default Value: ""

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:


Field	Meaning
CN	Common Name. This is commonly a hostname like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

encodedB
Data
Default Value: ""

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The and properties also may be used to specify a certificate.

When is set, a search is initiated in the current for the private key of the certificate. If the key is found, is updated to reflect the full subject of the selected certificate; otherwise, is set to an empty string.

encoded
String
Default Value: ""

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The and properties also may be used to specify a certificate.

Constructors

public init()

Creates a instance whose properties can be set. This is useful for use with when generating new certificates.

public init(encoded: )

Parses Encoded as an X.509 public key.

public init(storeType: , store: , storePassword: , subject: )

StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store.

After the store has been successfully opened, the component will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

public init(storeType: , store: , storePassword: , subject: )

StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a byte array containing the certificate data. StorePassword is the password used to protect the store.

Connection Type

This is a currently connected client.

Remarks

This type describes the connection of a client that is currently connected to the class. You may use the different fields of this type to manage the connection.

The following fields are available:

Fields

acceptData
Bool (read-only)
Default Value: True

This property indicates whether data reception is currently enabled. When , data reception is disabled and the DataIn event will not fire for the connection. Use the PauseData and ProcessData methods to pause and resume data reception.

bytesSent
Int32 (read-only)
Default Value: 0

This property shows how many bytes were sent after calling Send or SendBytes. Please see Send or SendBytes for more information.

Note: This property will always return 0 when the class is operating in the synchronous mode (i.e., the property is set to a positive value).

connected
Bool (read-only)
Default Value: False

This property indicates the status of individual connections.

When , the connection is established. Use the Disconnect method to disconnect an existing connection.

connectionId
Int32 (read-only)
Default Value: 0

This property contains an identifier generated by the class to identify each connection. This identifier is unique to this connection.

eolB
Data
Default Value: ""

The property is used to define boundaries in the input stream using the value of the property.

The property is especially useful with ASCII files. By setting it to , the incoming ASCII text stream can be split into lines. In this case, one event is fired for each line received (as well as in packet boundaries). The . bytes are discarded.

The property is a binary string. This means that it can be more than one byte long, and it can contain NULL bytes.

eol
String
Default Value: ""

The property is used to define boundaries in the input stream using the value of the property.

The property is a binary string. This means that it can be more than one byte long, and it can contain NULL bytes.

idleTimeout
Int32
Default Value: 0

This property contains the idle timeout for this connection. This property is similar to DefaultIdleTimeout but may be set on a per-connection basis to override DefaultIdleTimeout. This property specifies the idle timeout (in seconds) for the connected client. When set to a positive value, the class will disconnect idle clients after the specified timeout.

This applies only to clients that have not sent to received data within the specified number of seconds.

If set to 0 (default), no idle timeout is applied.

Note: DoEvents must be called for the class to check existing connections.

localAddress
String (read-only)
Default Value: ""

This property shows the IP address of the interface through which the connection is passing.

is important for multihomed hosts so that it can be used to find the particular network interface through which an individual connection is going.

maxLineLength
Int32
Default Value: 2048

This property is the size of an internal buffer that holds received data while waiting for an string.

If an string is found in the input stream before bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for is 256 bytes. The default value is 2048 bytes.

readyToSend
Bool (read-only)
Default Value: False

This property indicates whether the class is ready to send data.

This is after a client connects but will become after a failed call to Send or SendBytes. After a failed call to Send or SendBytes, the ReadyToSend event will fire and this property will be when data can be sent again.

recordLength
Int32 (read-only)
Default Value: 0

This property holds the current record length set by ChangeRecordLength. When this value is a positive number, the class will accumulate data until is reached and only then will fire the DataIn event with the data of length . This allows data to be received as records of known length. This value can be changed at any time by calling ChangeRecordLength, including within the DataIn event.

A value of 0 (default) means this setting is not used.

remoteHost
String (read-only)
Default Value: ""

This property shows the IP address of the remote host through which the connection is coming.

The connection must be valid or an error will be fired.

If the class is configured to use a SOCKS firewall, the value assigned to this property may be preceded with an "*". If this is the case, the host name is passed to the firewall unresolved and the firewall performs the DNS resolution.

remotePort
Int32 (read-only)
Default Value: 0

This property shows the Transmission Control Protocol (TCP) port on the remote host through which the connection is coming.

The connection must be valid or an error will be fired.

singleLineMode
Bool
Default Value: False

This property shows the special mode for line-oriented protocols. When SingleLineMode is True, the class treats the incoming data stream as lines separated by carriage return (CR), line feed (LF), or CRLF. The EOL property is ignored.

timeout
Int32
Default Value: 0

This property specifies a timeout for the class.

If the property is set to 0, all operations return immediately, potentially failing with a WOULDBLOCK error if data cannot be sent immediately.

If is set to a positive value, data is sent in a blocking manner and the class will wait for the operation to complete before returning control. The class will handle any potential WOULDBLOCK errors internally and automatically retry the operation for a maximum of seconds.

The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the class .

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the property is 0 (asynchronous operation).

userDataB
Data
Default Value: ""

The property holds connection-specific user-specified data.

User-specified data may be set or retrieved at any point while the connection is valid. This provides a simple way to associate arbitrary data with a specific connection.

userData
String
Default Value: ""

The property holds connection-specific user-specified data.

User-specified data may be set or retrieved at any point while the connection is valid. This provides a simple way to associate arbitrary data with a specific connection.

Constructors

public init()

Config Settings (TCPServer Module)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

TCPServer Config Settings

AllowedClients: A comma-separated list of host names or IP addresses that can access the class.

This configuration setting defines a comma-separated list of host names or IPv4 addresses that may access the class. The wildcard character "*" is supported. The default value is "*" and all connections are accepted.

When a client connects, the client's address is checked against the list defined here. If there is no match, the ConnectionRequest event fires with an Accept value set to . If no action is taken within the ConnectionRequest event, the client will be disconnected.

BindExclusively: Whether or not the component considers a local port reserved for exclusive use.

If this is (default), the component will bind to the local port with the ExclusiveAddressUse option set, meaning that nothing else can bind to the same port. Also the component will not be able to bind to local ports that are already in use by some other instance, and attempts to do so will result in failure.

BlockedClients: A comma-separated list of host names or IP addresses that cannot access the class.

This configuration setting defines a comma-separated list of host names or IPv4 addresses that cannot access the class.The default value is "" and all connections are accepted.

When a client connects, the client's address is checked against the list defined here. If there is a match, the ConnectionRequest event fires with an Accept value set to . If no action is taken within the ConnectionRequest event, the client will not be connected.

DefaultConnectionTimeout: The inactivity timeout applied to the SSL handshake.

This configuration setting specifies the inactivity (in seconds) to apply to incoming Secure Sockets Layer (SSL) connections. When set to a positive value, if the other end is unresponsive for the specified number of seconds, the connection will timeout. This is not applicable to the entire handshake. It is applicable only to the inactivity of the connecting client during the handshake if a response is expected and none is received within the timeout window. The default value is 0, and no connection-specific timeout is applied.

Note: This is applicable only to incoming SSL connections. This should be set only if there is a specific reason to do so.

InBufferSize: The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the Transmission Control Protocol (TCP)/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated, the InBufferSize reverts to its defined size. The same thing will happen if you attempt to make it too large or too small.

InBufferSize is shared among incoming connections. When the property is set, the corresponding value is set for incoming connections as they are accepted. Existing connections are not modified.

KeepAliveInterval: The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

A TCP keep-alive packet will be sent after a period of inactivity, as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. If this value is not specified here, the system default is 1 second. This setting is applicable to all connections.

Note: This value is not applicable in macOS.

KeepAliveTime: The inactivity time in milliseconds before a TCP keep-alive packet is sent.

By default, the operating system will determine the time a connection is idle before a TCP keep-alive packet is sent. If this value is not specified here, the system default is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds. This setting is applicable to all connections.

MaxConnections: The maximum number of connections available.

This is the maximum number of connections available. This property must be set before Listening is set to , and once set, it can no longer be changed for the current instance of the class. The maximum value for this setting is 100,000 connections. Use this setting with caution. Extremely large values may affect performance. The default value is 1000.

Note: Unix/Linux operating systems limit the number of simultaneous connections to 1024.

OutBufferSize: The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same thing will happen if you attempt to make it too large or too small.

OutBufferSize is shared among incoming connections. When the property is set, the corresponding value is set for incoming connections as they are accepted. Existing connections are not modified.

TcpNoDelay: Whether or not to delay when sending packets.

When set to True, the socket will send all data that are ready to send at once. When set to False, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this configuration setting is set to False.

UseIPv6: Whether to use IPv6.

When set to 0 (default), the class will use IPv4 exclusively. When set to 1, the class will use IPv6 exclusively. When set to 2, the class will listen for both IPv4 and IPv6 connections. If IPv6 is not available on the system, only IPv4 will be used. The default value is 0. Possible values are as follows:


0	IPv4 Only
1	IPv6 Only
2	IPv6 and IPv4

SSL Config Settings

LogSSLPackets: Controls whether SSL packets are logged when using the internal security API.

When SSLProvider is set to Internal, this configuration setting controls whether Secure Sockets Layer (SSL) packets should be logged. By default, this configuration setting is False, as it is useful only for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this configuration setting has no effect if SSLProvider is set to Platform.

OpenSSLCADir: The path to a directory containing CA certificates.

This functionality is available only when the provider is OpenSSL.

The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g., 9d66eef0.0, 9d66eef0.1). OpenSSL recommends the use of the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCAFile: Name of the file containing the list of CA's trusted by your application.

This functionality is available only when the provider is OpenSSL.

The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by the following sequences:

-----BEGIN CERTIFICATE-----

... (CA certificate in base64 encoding) ...

-----END CERTIFICATE-----

Before, between, and after the certificate text is allowed, which can be used, for example, for descriptions of the certificates. Refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCipherList: A string that controls the ciphers to be used by SSL.

This functionality is available only when the provider is OpenSSL.

The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".

OpenSSLPrngSeedData: The data to seed the pseudo random number generator (PRNG).

This functionality is available only when the provider is OpenSSL.

By default, OpenSSL uses the device file "/dev/urandom" to seed the PRNG, and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.

ReuseSSLSession: Determines if the SSL session is reused.

If set to True, the class will reuse the context if and only if the following criteria are met:

The target host name is the same.
The system cache entry has not expired (default timeout is 10 hours).
The application process that calls the function is the same.
The logon session is the same.
The instance of the class is the same.

SSLCACerts: A newline separated list of CA certificates to be included when performing an SSL handshake.

When SSLProvider is set to Internal, this configuration setting specifies one or more CA certificates to be included with the SSLCert property. Some servers or clients require the entire chain, including CA certificates, to be presented when performing SSL authentication. The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLCheckCRL: Whether to check the Certificate Revocation List for the server certificate.

This configuration setting specifies whether the class will check the Certificate Revocation List (CRL) specified by the server certificate. If set to 1 or 2, the class will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The class will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the class .

When set to 0 (default), the CRL check will not be performed by the class. When set to 1, it will attempt to perform the CRL check, but it will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.

This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems.

SSLCheckOCSP: Whether to use OCSP to check the status of the server certificate.

This configuration setting specifies whether the class will use OCSP to check the validity of the server certificate. If set to 1 or 2, the class will first obtain the Online Certificate Status Protocol (OCSP) URL from the server certificate's OCSP extension. The class will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation, the class .

When set to 0 (default), the class will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but it will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.

This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems.

SSLCipherStrength: The minimum cipher strength used for bulk encryption.

This minimum cipher strength is largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Note: This configuration setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this configuration setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList configuration setting.

SSLClientCACerts: A newline separated list of CA certificates to use during SSL client certificate validation.

This configuration setting is only applicable to server components (e.g., TCPServer) see SSLServerCACerts for client components (e.g., TCPClient). This setting can be used to optionally specify one or more CA certificates to be used when verifying the client certificate that is presented by the client during the SSL handshake when SSLAuthenticateClients is enabled. When verifying the client's certificate, the certificates trusted by the system will be used as part of the verification process. If the client's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This configuration setting should be set only if the client's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLEnabledCipherSuites: The cipher suite to be used in an SSL negotiation.

This configuration setting enables the cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the class will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when SSLProvider is set to Platform include the following: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=CALG_AES_256"); obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES"); Possible values when SSLProvider is set to Platform include the following:

CALG_3DES
CALG_3DES_112
CALG_AES
CALG_AES_128
CALG_AES_192
CALG_AES_256
CALG_AGREEDKEY_ANY
CALG_CYLINK_MEK
CALG_DES
CALG_DESX
CALG_DH_EPHEM
CALG_DH_SF
CALG_DSS_SIGN
CALG_ECDH
CALG_ECDH_EPHEM
CALG_ECDSA
CALG_ECMQV
CALG_HASH_REPLACE_OWF
CALG_HUGHES_MD5
CALG_HMAC
CALG_KEA_KEYX
CALG_MAC
CALG_MD2
CALG_MD4
CALG_MD5
CALG_NO_SIGN
CALG_OID_INFO_CNG_ONLY
CALG_OID_INFO_PARAMETERS
CALG_PCT1_MASTER
CALG_RC2
CALG_RC4
CALG_RC5
CALG_RSA_KEYX
CALG_RSA_SIGN
CALG_SCHANNEL_ENC_KEY
CALG_SCHANNEL_MAC_KEY
CALG_SCHANNEL_MASTER_HASH
CALG_SEAL
CALG_SHA
CALG_SHA1
CALG_SHA_256
CALG_SHA_384
CALG_SHA_512
CALG_SKIPJACK
CALG_SSL2_MASTER
CALG_SSL3_MASTER
CALG_SSL3_SHAMD5
CALG_TEK
CALG_TLS1_MASTER
CALG_TLS1PRF

Example values when SSLProvider is set to Internalinclude the following:

obj.config("SSLEnabledCipherSuites=*");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_ECDH_RSA_WITH_AES_128_CBC_SHA");

Possible values when SSLProvider is set to Internal include the following:

TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_128_GCM_SHA256
TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA256
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
TLS_DHE_RSA_WITH_AES_256_CBC_SHA
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
TLS_DHE_DSS_WITH_AES_256_CBC_SHA
TLS_RSA_WITH_AES_128_CBC_SHA
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_DSS_WITH_AES_128_CBC_SHA
TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_DES_CBC_SHA
TLS_DHE_RSA_WITH_DES_CBC_SHA
TLS_DHE_DSS_WITH_DES_CBC_SHA
TLS_RSA_WITH_RC4_128_MD5
TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols), only the following cipher suites are supported:

TLS_AES_256_GCM_SHA384
TLS_CHACHA20_POLY1305_SHA256
TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols: Used to enable/disable the supported security protocols.

This configuration setting is used to enable or disable the supported security protocols.

Not all supported protocols are enabled by default. The default value is 4032 for client components, and 3072 for server components. To specify a combination of enabled protocol versions set this config to the binary OR of one or more of the following values:


TLS1.3	12288 (Hex 3000)
TLS1.2	3072 (Hex C00) (Default - Client and Server)
TLS1.1	768 (Hex 300) (Default - Client)
TLS1	192 (Hex C0) (Default - Client)
SSL3	48 (Hex 30)
SSL2	12 (Hex 0C)

Note that only TLS 1.2 is enabled for server components that accept incoming connections. This adheres to industry standards to ensure a secure connection. Client components enable TLS 1.0, TLS 1.1, and TLS 1.2 by default and will negotiate the highest mutually supported version when connecting to a server, which should be TLS 1.2 in most cases.

SSLEnabledProtocols: Transport Layer Security (TLS) 1.3 Notes:

By default when TLS 1.3 is enabled, the class will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions.

In editions that are designed to run on Windows, SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is supported only on Windows 11/Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.

If set to 1 (Platform provider), please be aware of the following notes:

The platform provider is available only on Windows 11/Windows Server 2022 and up.
SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2, these restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.

SSLEnabledProtocols: SSL2 and SSL3 Notes:

SSL 2.0 and 3.0 are not supported by the class when the SSLProvider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and SSLProvider needs to be set to platform.

SSLEnableRenegotiation: Whether the renegotiation_info SSL extension is supported.

This configuration setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This configuration setting is by default, but it can be set to to enable the extension.

This configuration setting is applicable only when SSLProvider is set to Internal.

SSLIncludeCertChain: Whether the entire certificate chain is included in the SSLServerAuthentication event.

This configuration setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True, all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

SSLKeyLogFile: The location of a file where per-session secrets are written for debugging purposes.

This configuration setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the class will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools, such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffic for debugging purposes. When writing to this file, the class will only append, it will not overwrite previous values.

Note: This configuration setting is applicable only when SSLProvider is set to Internal.

SSLNegotiatedCipher: Returns the negotiated cipher suite.

This configuration setting returns the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

SSLNegotiatedCipherStrength: Returns the negotiated cipher suite strength.

This configuration setting returns the strength of the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

SSLNegotiatedCipherSuite: Returns the negotiated cipher suite.

This configuration setting returns the cipher suite negotiated during the SSL handshake represented as a single string.

SSLNegotiatedKeyExchange: Returns the negotiated key exchange algorithm.

This configuration setting returns the key exchange algorithm negotiated during the SSL handshake.

SSLNegotiatedKeyExchangeStrength: Returns the negotiated key exchange algorithm strength.

This configuration setting returns the strength of the key exchange algorithm negotiated during the SSL handshake.

SSLNegotiatedVersion: Returns the negotiated protocol version.

This configuration setting returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

SSLSecurityFlags: Flags that control certificate verification.

The following flags are defined (specified in hexadecimal notation). They can be ORed together to exclude multiple conditions:


0x00000001	Ignore time validity status of certificate.
0x00000002	Ignore time validity status of CTL.
0x00000004	Ignore non-nested certificate times.
0x00000010	Allow unknown certificate authority.
0x00000020	Ignore wrong certificate usage.
0x00000100	Ignore unknown certificate revocation status.
0x00000200	Ignore unknown CTL signer revocation status.
0x00000400	Ignore unknown certificate authority revocation status.
0x00000800	Ignore unknown root revocation status.
0x00008000	Allow test root certificate.
0x00004000	Trust test root certificate.
0x80000000	Ignore non-matching CN (certificate CN non-matching server name).

This functionality is currently not available when the provider is OpenSSL.

SSLServerCACerts: A newline separated list of CA certificates to use during SSL server certificate validation.

This configuration setting is only used by client components (e.g., TCPClient) see SSLClientCACerts for server components (e.g., TCPServer). This configuration setting can be used to optionally specify one or more CA certificates to be used when connecting to the server and verifying the server certificate. When verifying the server's certificate, the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This configuration setting should be set only if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

TLS12SignatureAlgorithms: Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.

This configuration setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the class will verify that the server certificate signature algorithm is among the values specified in this configuration setting. If the server certificate signature algorithm is unsupported, the class .

The format of this value is a comma-separated list of hash-signature combinations. For instance: component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this configuration setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

To not restrict the server's certificate signature algorithm, specify an empty string as the value for this configuration setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups: The supported groups for ECC.

This configuration setting specifies a comma-separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)

TLS13KeyShareGroups: The groups for which to pregenerate key shares.

This configuration setting specifies a comma-separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional roundtrip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result, only some groups are included by default in this configuration setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used that is not present in this list, it will incur an additional roundtrip and time to generate the key share for that group.

In most cases, this configuration setting does not need to be modified. This should be modified only if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448"
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1"
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096"
"ffdhe_6144"
"ffdhe_8192"

TLS13SignatureAlgorithms: The allowed certificate signature algorithms.

This configuration setting holds a comma-separated list of allowed signature algorithms. Possible values include the following:

"ed25519" (default)
"ed448" (default)
"ecdsa_secp256r1_sha256" (default)
"ecdsa_secp384r1_sha384" (default)
"ecdsa_secp521r1_sha512" (default)
"rsa_pkcs1_sha256" (default)
"rsa_pkcs1_sha384" (default)
"rsa_pkcs1_sha512" (default)
"rsa_pss_sha256" (default)
"rsa_pss_sha384" (default)
"rsa_pss_sha512" (default)

The default value is rsa_pss_sha256,rsa_pss_sha384,rsa_pss_sha512,rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512,ecdsa_secp256r1_sha256,ecdsa_secp384r1_sha384,ecdsa_secp521r1_sha512,ed25519,ed448. This configuration setting is applicable only when SSLEnabledProtocols includes TLS 1.3.

TLS13SupportedGroups: The supported groups for (EC)DHE key exchange.

This configuration setting specifies a comma-separated list of named groups used in TLS 1.3 for key exchange. This configuration setting should be modified only if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448" (default)
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096" (default)
"ffdhe_6144" (default)
"ffdhe_8192" (default)

Base Config Settings

BuildInfo: Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

CodePage: The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:


Identifier	Name
037	IBM EBCDIC - U.S./Canada
437	OEM - United States
500	IBM EBCDIC - International
708	Arabic - ASMO 708
709	Arabic - ASMO 449+, BCON V4
710	Arabic - Transparent Arabic
720	Arabic - Transparent ASMO
737	OEM - Greek (formerly 437G)
775	OEM - Baltic
850	OEM - Multilingual Latin I
852	OEM - Latin II
855	OEM - Cyrillic (primarily Russian)
857	OEM - Turkish
858	OEM - Multilingual Latin I + Euro symbol
860	OEM - Portuguese
861	OEM - Icelandic
862	OEM - Hebrew
863	OEM - Canadian-French
864	OEM - Arabic
865	OEM - Nordic
866	OEM - Russian
869	OEM - Modern Greek
870	IBM EBCDIC - Multilingual/ROECE (Latin-2)
874	ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875	IBM EBCDIC - Modern Greek
932	ANSI/OEM - Japanese, Shift-JIS
936	ANSI/OEM - Simplified Chinese (PRC, Singapore)
949	ANSI/OEM - Korean (Unified Hangul Code)
950	ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026	IBM EBCDIC - Turkish (Latin-5)
1047	IBM EBCDIC - Latin 1/Open System
1140	IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141	IBM EBCDIC - Germany (20273 + Euro symbol)
1142	IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143	IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144	IBM EBCDIC - Italy (20280 + Euro symbol)
1145	IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146	IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147	IBM EBCDIC - France (20297 + Euro symbol)
1148	IBM EBCDIC - International (500 + Euro symbol)
1149	IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200	Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201	Unicode UCS-2 Big-Endian
1250	ANSI - Central European
1251	ANSI - Cyrillic
1252	ANSI - Latin I
1253	ANSI - Greek
1254	ANSI - Turkish
1255	ANSI - Hebrew
1256	ANSI - Arabic
1257	ANSI - Baltic
1258	ANSI/OEM - Vietnamese
1361	Korean (Johab)
10000	MAC - Roman
10001	MAC - Japanese
10002	MAC - Traditional Chinese (Big5)
10003	MAC - Korean
10004	MAC - Arabic
10005	MAC - Hebrew
10006	MAC - Greek I
10007	MAC - Cyrillic
10008	MAC - Simplified Chinese (GB 2312)
10010	MAC - Romania
10017	MAC - Ukraine
10021	MAC - Thai
10029	MAC - Latin II
10079	MAC - Icelandic
10081	MAC - Turkish
10082	MAC - Croatia
12000	Unicode UCS-4 Little-Endian
12001	Unicode UCS-4 Big-Endian
20000	CNS - Taiwan
20001	TCA - Taiwan
20002	Eten - Taiwan
20003	IBM5550 - Taiwan
20004	TeleText - Taiwan
20005	Wang - Taiwan
20105	IA5 IRV International Alphabet No. 5 (7-bit)
20106	IA5 German (7-bit)
20107	IA5 Swedish (7-bit)
20108	IA5 Norwegian (7-bit)
20127	US-ASCII (7-bit)
20261	T.61
20269	ISO 6937 Non-Spacing Accent
20273	IBM EBCDIC - Germany
20277	IBM EBCDIC - Denmark/Norway
20278	IBM EBCDIC - Finland/Sweden
20280	IBM EBCDIC - Italy
20284	IBM EBCDIC - Latin America/Spain
20285	IBM EBCDIC - United Kingdom
20290	IBM EBCDIC - Japanese Katakana Extended
20297	IBM EBCDIC - France
20420	IBM EBCDIC - Arabic
20423	IBM EBCDIC - Greek
20424	IBM EBCDIC - Hebrew
20833	IBM EBCDIC - Korean Extended
20838	IBM EBCDIC - Thai
20866	Russian - KOI8-R
20871	IBM EBCDIC - Icelandic
20880	IBM EBCDIC - Cyrillic (Russian)
20905	IBM EBCDIC - Turkish
20924	IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932	JIS X 0208-1990 & 0121-1990
20936	Simplified Chinese (GB2312)
21025	IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027	Extended Alpha Lowercase
21866	Ukrainian (KOI8-U)
28591	ISO 8859-1 Latin I
28592	ISO 8859-2 Central Europe
28593	ISO 8859-3 Latin 3
28594	ISO 8859-4 Baltic
28595	ISO 8859-5 Cyrillic
28596	ISO 8859-6 Arabic
28597	ISO 8859-7 Greek
28598	ISO 8859-8 Hebrew
28599	ISO 8859-9 Latin 5
28605	ISO 8859-15 Latin 9
29001	Europa 3
38598	ISO 8859-8 Hebrew
50220	ISO 2022 Japanese with no halfwidth Katakana
50221	ISO 2022 Japanese with halfwidth Katakana
50222	ISO 2022 Japanese JIS X 0201-1989
50225	ISO 2022 Korean
50227	ISO 2022 Simplified Chinese
50229	ISO 2022 Traditional Chinese
50930	Japanese (Katakana) Extended
50931	US/Canada and Japanese
50933	Korean Extended and Korean
50935	Simplified Chinese Extended and Simplified Chinese
50936	Simplified Chinese
50937	US/Canada and Traditional Chinese
50939	Japanese (Latin) Extended and Japanese
51932	EUC - Japanese
51936	EUC - Simplified Chinese
51949	EUC - Korean
51950	EUC - Traditional Chinese
52936	HZ-GB2312 Simplified Chinese
54936	Windows XP: GB18030 Simplified Chinese (4 Byte)
57002	ISCII Devanagari
57003	ISCII Bengali
57004	ISCII Tamil
57005	ISCII Telugu
57006	ISCII Assamese
57007	ISCII Oriya
57008	ISCII Kannada
57009	ISCII Malayalam
57010	ISCII Gujarati
57011	ISCII Punjabi
65000	Unicode UTF-7
65001	Unicode UTF-8

The following is a list of valid code page identifiers for Mac OS only:


Identifier	Name
1	ASCII
2	NEXTSTEP
3	JapaneseEUC
4	UTF8
5	ISOLatin1
6	Symbol
7	NonLossyASCII
8	ShiftJIS
9	ISOLatin2
10	Unicode
11	WindowsCP1251
12	WindowsCP1252
13	WindowsCP1253
14	WindowsCP1254
15	WindowsCP1250
21	ISO2022JP
30	MacOSRoman
10	UTF16String
0x90000100	UTF16BigEndian
0x94000100	UTF16LittleEndian
0x8c000100	UTF32String
0x98000100	UTF32BigEndian
0x9c000100	UTF32LittleEndian
65536	Proprietary

LicenseInfo: Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a class is using. It will return the following information:

Product: The product the license is for.
Product Key: The key the license was generated from.
License Source: Where the license was found (e.g., RuntimeLicense, License File).
License Type: The type of license installed (e.g., Royalty Free, Single Server).
Last Valid Build: The last valid build number for which the license will work.

MaskSensitiveData: Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to to mask sensitive data. The default is .

This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseInternalSecurityAPI: Whether or not to use the system security libraries or an internal implementation.

When set to , the class will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to tells the class to use the internal implementation instead of using the system security libraries.

This setting is set to by default on all platforms.

Trappable Errors (TCPServer Module)

TCPServer Errors

100	You cannot change the RemotePort at this time. A connection is in progress.
101	You cannot change the RemoteHost at this time. A connection is in progress.
102	The RemoteHost address is invalid (0.0.0.0).
104	TCPServer is already listening.
106	Cannot change LocalPort when TCPServer is listening.
107	Cannot change LocalHost when TCPServer is listening.
108	Cannot change MaxConnections when TCPServer is listening.
112	You cannot change MaxLineLength at this time. A connection is in progress.
116	RemotePort cannot be zero. Please specify a valid service port number.
126	Invalid ConnectionId.
135	Operation would block.

SSL Errors

270	Cannot load specified security library.
271	Cannot open certificate store.
272	Cannot find specified certificate.
273	Cannot acquire security credentials.
274	Cannot find certificate chain.
275	Cannot verify certificate chain.
276	Error during handshake.
280	Error verifying certificate.
281	Could not find client certificate.
282	Could not find server certificate.
283	Error encrypting data.
284	Error decrypting data.

TCP/IP Errors

10004	[10004] Interrupted system call.
10009	[10009] Bad file number.
10013	[10013] Access denied.
10014	[10014] Bad address.
10022	[10022] Invalid argument.
10024	[10024] Too many open files.
10035	[10035] Operation would block.
10036	[10036] Operation now in progress.
10037	[10037] Operation already in progress.
10038	[10038] Socket operation on nonsocket.
10039	[10039] Destination address required.
10040	[10040] Message is too long.
10041	[10041] Protocol wrong type for socket.
10042	[10042] Bad protocol option.
10043	[10043] Protocol is not supported.
10044	[10044] Socket type is not supported.
10045	[10045] Operation is not supported on socket.
10046	[10046] Protocol family is not supported.
10047	[10047] Address family is not supported by protocol family.
10048	[10048] Address already in use.
10049	[10049] Cannot assign requested address.
10050	[10050] Network is down.
10051	[10051] Network is unreachable.
10052	[10052] Net dropped connection or reset.
10053	[10053] Software caused connection abort.
10054	[10054] Connection reset by peer.
10055	[10055] No buffer space available.
10056	[10056] Socket is already connected.
10057	[10057] Socket is not connected.
10058	[10058] Cannot send after socket shutdown.
10059	[10059] Too many references, cannot splice.
10060	[10060] Connection timed out.
10061	[10061] Connection refused.
10062	[10062] Too many levels of symbolic links.
10063	[10063] File name is too long.
10064	[10064] Host is down.
10065	[10065] No route to host.
10066	[10066] Directory is not empty
10067	[10067] Too many processes.
10068	[10068] Too many users.
10069	[10069] Disc Quota Exceeded.
10070	[10070] Stale NFS file handle.
10071	[10071] Too many levels of remote in path.
10091	[10091] Network subsystem is unavailable.
10092	[10092] WINSOCK DLL Version out of range.
10093	[10093] Winsock is not loaded yet.
11001	[11001] Host not found.
11002	[11002] Nonauthoritative 'Host not found' (try again or check DNS setup).
11003	[11003] Nonrecoverable errors: FORMERR, REFUSED, NOTIMP.
11004	[11004] Valid name, no data record (check DNS setup).