SMPP Class
Properties Methods Events Config Settings Errors
The SMPP Class implements a lightweight message transmission interface using the Short Message Peer-to-Peer protocol, most known for its use in cellular text messaging.
Class Name
IPWorks_SMPP
Procedural Interface
ipworks_smpp_open(); ipworks_smpp_close($res); ipworks_smpp_register_callback($res, $id, $function); ipworks_smpp_get_last_error($res); ipworks_smpp_get_last_error_code($res); ipworks_smpp_set($res, $id, $index, $value); ipworks_smpp_get($res, $id, $index); ipworks_smpp_do_addrecipient($res, $recipienttype, $recipientaddress); ipworks_smpp_do_cancelmessage($res, $messageid); ipworks_smpp_do_checklink($res); ipworks_smpp_do_checkmessagestatus($res, $messageid); ipworks_smpp_do_config($res, $configurationstring); ipworks_smpp_do_connect($res); ipworks_smpp_do_connectto($res, $userid, $password); ipworks_smpp_do_disconnect($res); ipworks_smpp_do_doevents($res); ipworks_smpp_do_interrupt($res); ipworks_smpp_do_replacemessage($res, $messageid, $newmessage); ipworks_smpp_do_reset($res); ipworks_smpp_do_sendcommand($res, $commandid, $payload); ipworks_smpp_do_senddata($res, $data); ipworks_smpp_do_sendmessage($res, $message);
Remarks
The SMPP class supports both plaintext and Secure Sockets Layer/Transport Layer Security (SSL/TLS) connections. When connecting over Secure Sockets Layer/Transport Layer Security (SSL/TLS) the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL-related settings are also supported through the Config method.
The Smpp Class will bind as a transceiver, and thus it can send and receive messages from the server. Additionally, it can send single and multirecipient messages and also can upload data.
Using Smpp is quite easy. First, simply set the SMPPServer, SMPPPort, and, if needed, the SMPPVersion properties. Second, a single call to the Connect method with a specified user Id and password will connect the class.
Transmitting messages is just as easy. You can manipulate the Recipients properties directly, or just use AddRecipient method to add recipients one at a time to the recipient list. After all recipients have been added, a single call to the SendMessage method will transmit the specified message. If the send is successful, the method will set and return the value of the MessageId property. Otherwise, an Error event will fire for each unsuccessful message destination.
The Smpp Class supports message and data transmission, as well as auxiliary operations, such as CheckMessageStatus and ReplaceMessage. All nonimplemented features of the protocol are supported through the SendCommand method and PITrail event. Because of the nature of the protocol, all methods and operations are implemented synchronously.
Property List
The following is the full list of the properties of the class with short descriptions. Click on the links for further details.
Connected | This property indicates whether the class is connected. |
FirewallAutoDetect | This property tells the class whether or not to automatically detect and use firewall system settings, if available. |
FirewallType | This property determines the type of firewall to connect through. |
FirewallHost | This property contains the name or IP address of the firewall (optional). |
FirewallPassword | This property contains a password if authentication is to be used when connecting through the firewall. |
FirewallPort | This property contains the Transmission Control Protocol (TCP) port for the firewall Host . |
FirewallUser | This property contains a username if authentication is to be used when connecting through a firewall. |
Idle | This property specifies the current status of the class. |
LocalHost | This property includes the name of the local host or user-assigned IP interface through which connections are initiated or accepted. |
MessageExpiration | This property denotes the validity period of the current message. |
MessageId | This property indicates the identifier of the most recently sent message. |
MessagePriority | This property indicates the priority level of the current message. |
Password | This property contains the user's password. |
Protocol | This property defines the SMPP protocol to be used. |
RecipientCount | The number of records in the Recipient arrays. |
RecipientAddress | This property contains the email address of a particular recipient. |
RecipientType | This property contains the type of a particular recipient. |
ScheduledDelivery | This property tells the server when to deliver the current message. |
SenderAddress | This property contains the address of the External Short Messaging Entity (ESME). |
ServiceType | This property indicates the type of service for the current message. |
SMPPPort | This property contains the server port for secure SMPP (default 2775). |
SMPPServer | This property is the SMPP entity to which the class will connect. |
SMPPVersion | This property indicates the SMPP version to be used throughout the connection. |
SSLAcceptServerCertEffectiveDate | This is the date on which this certificate becomes valid. |
SSLAcceptServerCertExpirationDate | This is the date the certificate expires. |
SSLAcceptServerCertExtendedKeyUsage | This is a comma-delimited list of extended key usage identifiers. |
SSLAcceptServerCertFingerprint | This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. |
SSLAcceptServerCertFingerprintSHA1 | This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. |
SSLAcceptServerCertFingerprintSHA256 | This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. |
SSLAcceptServerCertIssuer | This is the issuer of the certificate. |
SSLAcceptServerCertPrivateKey | This is the private key of the certificate (if available). |
SSLAcceptServerCertPrivateKeyAvailable | This property shows whether a PrivateKey is available for the selected certificate. |
SSLAcceptServerCertPrivateKeyContainer | This is the name of the PrivateKey container for the certificate (if available). |
SSLAcceptServerCertPublicKey | This is the public key of the certificate. |
SSLAcceptServerCertPublicKeyAlgorithm | This property contains the textual description of the certificate's public key algorithm. |
SSLAcceptServerCertPublicKeyLength | This is the length of the certificate's public key (in bits). |
SSLAcceptServerCertSerialNumber | This is the serial number of the certificate encoded as a string. |
SSLAcceptServerCertSignatureAlgorithm | The property contains the text description of the certificate's signature algorithm. |
SSLAcceptServerCertStore | This is the name of the certificate store for the client certificate. |
SSLAcceptServerCertStorePassword | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
SSLAcceptServerCertStoreType | This is the type of certificate store for this certificate. |
SSLAcceptServerCertSubjectAltNames | This property contains comma-separated lists of alternative subject names for the certificate. |
SSLAcceptServerCertThumbprintMD5 | This property contains the MD5 hash of the certificate. |
SSLAcceptServerCertThumbprintSHA1 | This property contains the SHA-1 hash of the certificate. |
SSLAcceptServerCertThumbprintSHA256 | This property contains the SHA-256 hash of the certificate. |
SSLAcceptServerCertUsage | This property contains the text description of UsageFlags . |
SSLAcceptServerCertUsageFlags | This property contains the flags that show intended use for the certificate. |
SSLAcceptServerCertVersion | This property contains the certificate's version number. |
SSLAcceptServerCertSubject | This is the subject of the certificate used for client authentication. |
SSLAcceptServerCertEncoded | This is the certificate (PEM/Base64 encoded). |
SSLCertEffectiveDate | This is the date on which this certificate becomes valid. |
SSLCertExpirationDate | This is the date the certificate expires. |
SSLCertExtendedKeyUsage | This is a comma-delimited list of extended key usage identifiers. |
SSLCertFingerprint | This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. |
SSLCertFingerprintSHA1 | This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. |
SSLCertFingerprintSHA256 | This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. |
SSLCertIssuer | This is the issuer of the certificate. |
SSLCertPrivateKey | This is the private key of the certificate (if available). |
SSLCertPrivateKeyAvailable | This property shows whether a PrivateKey is available for the selected certificate. |
SSLCertPrivateKeyContainer | This is the name of the PrivateKey container for the certificate (if available). |
SSLCertPublicKey | This is the public key of the certificate. |
SSLCertPublicKeyAlgorithm | This property contains the textual description of the certificate's public key algorithm. |
SSLCertPublicKeyLength | This is the length of the certificate's public key (in bits). |
SSLCertSerialNumber | This is the serial number of the certificate encoded as a string. |
SSLCertSignatureAlgorithm | The property contains the text description of the certificate's signature algorithm. |
SSLCertStore | This is the name of the certificate store for the client certificate. |
SSLCertStorePassword | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
SSLCertStoreType | This is the type of certificate store for this certificate. |
SSLCertSubjectAltNames | This property contains comma-separated lists of alternative subject names for the certificate. |
SSLCertThumbprintMD5 | This property contains the MD5 hash of the certificate. |
SSLCertThumbprintSHA1 | This property contains the SHA-1 hash of the certificate. |
SSLCertThumbprintSHA256 | This property contains the SHA-256 hash of the certificate. |
SSLCertUsage | This property contains the text description of UsageFlags . |
SSLCertUsageFlags | This property contains the flags that show intended use for the certificate. |
SSLCertVersion | This property contains the certificate's version number. |
SSLCertSubject | This is the subject of the certificate used for client authentication. |
SSLCertEncoded | This is the certificate (PEM/Base64 encoded). |
SSLEnabled | This property indicates whether Transport Layer Security/Secure Sockets Layer (TLS/SSL) is enabled. |
SSLProvider | This property specifies the Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use. |
SSLServerCertEffectiveDate | This is the date on which this certificate becomes valid. |
SSLServerCertExpirationDate | This is the date the certificate expires. |
SSLServerCertExtendedKeyUsage | This is a comma-delimited list of extended key usage identifiers. |
SSLServerCertFingerprint | This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. |
SSLServerCertFingerprintSHA1 | This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. |
SSLServerCertFingerprintSHA256 | This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. |
SSLServerCertIssuer | This is the issuer of the certificate. |
SSLServerCertPrivateKey | This is the private key of the certificate (if available). |
SSLServerCertPrivateKeyAvailable | This property shows whether a PrivateKey is available for the selected certificate. |
SSLServerCertPrivateKeyContainer | This is the name of the PrivateKey container for the certificate (if available). |
SSLServerCertPublicKey | This is the public key of the certificate. |
SSLServerCertPublicKeyAlgorithm | This property contains the textual description of the certificate's public key algorithm. |
SSLServerCertPublicKeyLength | This is the length of the certificate's public key (in bits). |
SSLServerCertSerialNumber | This is the serial number of the certificate encoded as a string. |
SSLServerCertSignatureAlgorithm | The property contains the text description of the certificate's signature algorithm. |
SSLServerCertStore | This is the name of the certificate store for the client certificate. |
SSLServerCertStorePassword | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
SSLServerCertStoreType | This is the type of certificate store for this certificate. |
SSLServerCertSubjectAltNames | This property contains comma-separated lists of alternative subject names for the certificate. |
SSLServerCertThumbprintMD5 | This property contains the MD5 hash of the certificate. |
SSLServerCertThumbprintSHA1 | This property contains the SHA-1 hash of the certificate. |
SSLServerCertThumbprintSHA256 | This property contains the SHA-256 hash of the certificate. |
SSLServerCertUsage | This property contains the text description of UsageFlags . |
SSLServerCertUsageFlags | This property contains the flags that show intended use for the certificate. |
SSLServerCertVersion | This property contains the certificate's version number. |
SSLServerCertSubject | This is the subject of the certificate used for client authentication. |
SSLServerCertEncoded | This is the certificate (PEM/Base64 encoded). |
SSLStartMode | This property determines how the class starts the Secure Sockets Layer (SSL) negotiation. |
SystemType | This property contains a string representing the type of system during a connection. |
Timeout | This property includes the timeout for the class. |
UserId | This property is used for identification with the SMPP service. |
Method List
The following is the full list of the methods of the class with short descriptions. Click on the links for further details.
AddRecipient | This method will add a recipient of the specified type to the recipient list. |
CancelMessage | This method will cancel the specified message. |
CheckLink | This method will check the connection to the server. |
CheckMessageStatus | This method will retrieve the status of the specified message. |
Config | Sets or retrieves a configuration setting. |
Connect | This method will bind as a transceiver to the SMPP service. |
ConnectTo | This method will bind as a transceiver to the SMPP service. |
Disconnect | This method will disconnect from the SMPP service. |
DoEvents | This method processes events from the internal message queue. |
Interrupt | This method interrupts the current method. |
ReplaceMessage | This method replaces a previously sent message with a new one. |
Reset | This method will reset the class. |
SendCommand | This method will format and send a protocol data unit (PDU) using the specified command identifier and payload. |
SendData | This method sends raw data to Recipients . |
SendMessage | This method sends a message to all recipients in the recipient list. |
Event List
The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.
Connected | This event is fired after a successful bind operation. |
ConnectionStatus | This event is fired to indicate changes in the connection state. |
Disconnected | This event is fired when connection to the SMS service is lost. |
Error | This event is fired when the server detects an error. |
MessageIn | This event is fired upon receipt of a message. |
MessageStatus | This event is fired upon receipt of a message. |
PITrail | This event is fired once for each protocol data unit (PDU) sent between the client and server. |
ReadyToSend | This event is fired when the class is ready to send data. |
SSLServerAuthentication | Fired after the server presents its certificate to the client. |
SSLStatus | Fired when secure connection progress messages are available. |
Config Settings
The following is a list of config settings for the class with short descriptions. Click on the links for further details.
AddressRange | Specifies the addr_range parameter when binding. |
BinaryDataCoding | Whether or not to binary encode the message when DataCoding is set. |
BindAsReceiver | Causes the class to bind as a receiver. |
BindAsTransmitter | Causes the class to bind as a transmitter. |
CustomTLV | Optional TLV parameters added after the mandatory parameters and before the payload. |
DataCoding | The data encoding mechanism to be used for the current message. |
DecodeHexStrings | Will decode an ascii hex-representation of binary data prior to transmission. |
DestinationNPI | The Number Planning Indicator for the destination ESME. |
DestinationTON | The Type of Number for the destination ESME. |
DoSplitLargeMessages | Splits long messages and returns the UDH and Message Parts. |
HexString | A hex-encoded binary string to be sent to the current recipient. |
IncomingDestinationAddress | Returns the dest_addr field inside the received message. |
IntermediateNotification | Causes the class to request intermediate notification. |
MaxCIMDSMSLength | Indicates the maximum SMS message length for the CIMD protocol. |
MaxSMSLength | Indicates the maximum SMS message length. |
MCReceipt | The Type of MC Delivery Receipt requested. |
MessageInReceiptedMessageId | The receipted_message_id field of an incoming deliver_sm PDU. |
MessageMode | The Type of Messaging Mode requested. |
MessageType | The Type of Message. |
PDUFormat | The format of the PDU. |
ProtocolId | The protocol identifier. |
ReplaceIfPresent | Indicates whether the replace_if_present_flag is enabled when sending a message. |
SMEAcknowledgement | The Type of SME originated acknowledgment requested. |
SourceNPI | The Number Planning Indicator for the ESME. |
SourceTON | The Type of Number for the ESME. |
SplitLargeMessages | Determines whether large messages are split into multiple parts. |
SplitMessageMethod | Determines how large messages are split into multiple parts. |
StatusReportRequest | Defines in what cases a status report is created by the server. |
SubAddr | Defines a unique index for application instance. |
SynchronousSendCommand | Controls whether SendCommand behaves synchronously or asynchronously. |
SynchronousSendMessage | Controls whether SendMessage behaves synchronously or asynchronously. |
UseGSM7BitEncoding | Whether or not to use GSM 7-bit encoding. |
UseGSM7bitEncodingCompression | Whether to compress GSM 7-bit encoded characters. |
WaitForBanner | Specifies the CIMD2 banner the class will wait for when connecting. |
ConnectionTimeout | Sets a separate timeout value for establishing a connection. |
FirewallAutoDetect | Tells the class whether or not to automatically detect and use firewall system settings, if available. |
FirewallHost | Name or IP address of firewall (optional). |
FirewallPassword | Password to be used if authentication is to be used when connecting through the firewall. |
FirewallPort | The TCP port for the FirewallHost;. |
FirewallType | Determines the type of firewall to connect through. |
FirewallUser | A user name if authentication is to be used connecting through a firewall. |
KeepAliveInterval | The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received. |
KeepAliveTime | The inactivity time in milliseconds before a TCP keep-alive packet is sent. |
Linger | When set to True, connections are terminated gracefully. |
LingerTime | Time in seconds to have the connection linger. |
LocalHost | The name of the local host through which connections are initiated or accepted. |
LocalPort | The port in the local host where the class binds. |
MaxLineLength | The maximum amount of data to accumulate when no EOL is found. |
MaxTransferRate | The transfer rate limit in bytes per second. |
ProxyExceptionsList | A semicolon separated list of hosts and IPs to bypass when using a proxy. |
TCPKeepAlive | Determines whether or not the keep alive socket option is enabled. |
TcpNoDelay | Whether or not to delay when sending packets. |
UseIPv6 | Whether to use IPv6. |
LogSSLPackets | Controls whether SSL packets are logged when using the internal security API. |
OpenSSLCADir | The path to a directory containing CA certificates. |
OpenSSLCAFile | Name of the file containing the list of CA's trusted by your application. |
OpenSSLCipherList | A string that controls the ciphers to be used by SSL. |
OpenSSLPrngSeedData | The data to seed the pseudo random number generator (PRNG). |
ReuseSSLSession | Determines if the SSL session is reused. |
SSLCACertFilePaths | The paths to CA certificate files on Unix/Linux. |
SSLCACerts | A newline separated list of CA certificate to be included when performing an SSL handshake. |
SSLCheckCRL | Whether to check the Certificate Revocation List for the server certificate. |
SSLCheckOCSP | Whether to use OCSP to check the status of the server certificate. |
SSLCipherStrength | The minimum cipher strength used for bulk encryption. |
SSLClientCACerts | A newline separated list of CA certificates to use during SSL client certificate validation. |
SSLEnabledCipherSuites | The cipher suite to be used in an SSL negotiation. |
SSLEnabledProtocols | Used to enable/disable the supported security protocols. |
SSLEnableRenegotiation | Whether the renegotiation_info SSL extension is supported. |
SSLIncludeCertChain | Whether the entire certificate chain is included in the SSLServerAuthentication event. |
SSLKeyLogFile | The location of a file where per-session secrets are written for debugging purposes. |
SSLNegotiatedCipher | Returns the negotiated cipher suite. |
SSLNegotiatedCipherStrength | Returns the negotiated cipher suite strength. |
SSLNegotiatedCipherSuite | Returns the negotiated cipher suite. |
SSLNegotiatedKeyExchange | Returns the negotiated key exchange algorithm. |
SSLNegotiatedKeyExchangeStrength | Returns the negotiated key exchange algorithm strength. |
SSLNegotiatedVersion | Returns the negotiated protocol version. |
SSLSecurityFlags | Flags that control certificate verification. |
SSLServerCACerts | A newline separated list of CA certificates to use during SSL server certificate validation. |
TLS12SignatureAlgorithms | Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal. |
TLS12SupportedGroups | The supported groups for ECC. |
TLS13KeyShareGroups | The groups for which to pregenerate key shares. |
TLS13SignatureAlgorithms | The allowed certificate signature algorithms. |
TLS13SupportedGroups | The supported groups for (EC)DHE key exchange. |
AbsoluteTimeout | Determines whether timeouts are inactivity timeouts or absolute timeouts. |
FirewallData | Used to send extra data to the firewall. |
InBufferSize | The size in bytes of the incoming queue of the socket. |
OutBufferSize | The size in bytes of the outgoing queue of the socket. |
BuildInfo | Information about the product's build. |
CodePage | The system code page used for Unicode to Multibyte translations. |
LicenseInfo | Information about the current license. |
MaskSensitiveData | Whether sensitive data is masked in log messages. |
ProcessIdleEvents | Whether the class uses its internal event loop to process events when the main thread is idle. |
SelectWaitMillis | The length of time in milliseconds the class will wait when DoEvents is called if there are no events to process. |
UseInternalSecurityAPI | Whether or not to use the system security libraries or an internal implementation. |
Connected Property (IPWorks_SMPP Class)
This property indicates whether the class is connected.
Object Oriented Interface
public function getConnected();
Procedural Interface
ipworks_smpp_get($res, 1 );
Default Value
false
Remarks
This property indicates whether the class is connected to the remote host. Use the Connect and Disconnect methods to manage the connection.
This property is read-only and not available at design time.
Data Type
Boolean
FirewallAutoDetect Property (IPWorks_SMPP Class)
This property tells the class whether or not to automatically detect and use firewall system settings, if available.
Object Oriented Interface
public function getFirewallAutoDetect(); public function setFirewallAutoDetect($value);
Procedural Interface
ipworks_smpp_get($res, 2 ); ipworks_smpp_set($res, 2, $value );
Default Value
false
Remarks
This property tells the class whether or not to automatically detect and use firewall system settings, if available.
Data Type
Boolean
FirewallType Property (IPWorks_SMPP Class)
This property determines the type of firewall to connect through.
Object Oriented Interface
public function getFirewallType(); public function setFirewallType($value);
Procedural Interface
ipworks_smpp_get($res, 3 ); ipworks_smpp_set($res, 3, $value );
Default Value
0
Remarks
This property determines the type of firewall to connect through. The applicable values are as follows:
fwNone (0) | No firewall (default setting). |
fwTunnel (1) | Connect through a tunneling proxy. FirewallPort is set to 80. |
fwSOCKS4 (2) | Connect through a SOCKS4 Proxy. FirewallPort is set to 1080. |
fwSOCKS5 (3) | Connect through a SOCKS5 Proxy. FirewallPort is set to 1080. |
fwSOCKS4A (10) | Connect through a SOCKS4A Proxy. FirewallPort is set to 1080. |
Data Type
Integer
FirewallHost Property (IPWorks_SMPP Class)
This property contains the name or IP address of the firewall (optional).
Object Oriented Interface
public function getFirewallHost(); public function setFirewallHost($value);
Procedural Interface
ipworks_smpp_get($res, 4 ); ipworks_smpp_set($res, 4, $value );
Default Value
''
Remarks
This property contains the name or IP address of the firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.
If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the class fails with an error.
Data Type
String
FirewallPassword Property (IPWorks_SMPP Class)
This property contains a password if authentication is to be used when connecting through the firewall.
Object Oriented Interface
public function getFirewallPassword(); public function setFirewallPassword($value);
Procedural Interface
ipworks_smpp_get($res, 5 ); ipworks_smpp_set($res, 5, $value );
Default Value
''
Remarks
This property contains a password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the class fails with an error.
Data Type
String
FirewallPort Property (IPWorks_SMPP Class)
This property contains the Transmission Control Protocol (TCP) port for the firewall Host .
Object Oriented Interface
public function getFirewallPort(); public function setFirewallPort($value);
Procedural Interface
ipworks_smpp_get($res, 6 ); ipworks_smpp_set($res, 6, $value );
Default Value
0
Remarks
This property contains the Transmission Control Protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.
Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.
Data Type
Integer
FirewallUser Property (IPWorks_SMPP Class)
This property contains a username if authentication is to be used when connecting through a firewall.
Object Oriented Interface
public function getFirewallUser(); public function setFirewallUser($value);
Procedural Interface
ipworks_smpp_get($res, 7 ); ipworks_smpp_set($res, 7, $value );
Default Value
''
Remarks
This property contains a username if authentication is to be used when connecting through a firewall. If FirewallHost is specified, this property and the FirewallPassword property are used to connect and authenticate to the given Firewall. If the authentication fails, the class fails with an error.
Data Type
String
Idle Property (IPWorks_SMPP Class)
This property specifies the current status of the class.
Object Oriented Interface
public function getIdle();
Procedural Interface
ipworks_smpp_get($res, 8 );
Default Value
true
Remarks
Idle will be False if the component is currently busy (communicating or waiting for an answer), and True at all other times.
This property is read-only.
Data Type
Boolean
LocalHost Property (IPWorks_SMPP Class)
This property includes the name of the local host or user-assigned IP interface through which connections are initiated or accepted.
Object Oriented Interface
public function getLocalHost(); public function setLocalHost($value);
Procedural Interface
ipworks_smpp_get($res, 9 ); ipworks_smpp_set($res, 9, $value );
Default Value
''
Remarks
The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.
In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.
If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).
Note: LocalHost is not persistent. You must always set it in code, and never in the property window.
Data Type
String
MessageExpiration Property (IPWorks_SMPP Class)
This property denotes the validity period of the current message.
Object Oriented Interface
public function getMessageExpiration(); public function setMessageExpiration($value);
Procedural Interface
ipworks_smpp_get($res, 10 ); ipworks_smpp_set($res, 10, $value );
Default Value
''
Remarks
This property indicates the Message Center expiration time, after which the message should be discarded if not delivered to the destination. It can be set using absolute or relative time formats.
Absolute Time Format is a 16-character string represented as "YYMMDDhhmmsstnnp" where:
YY | the last two digits of the year (00-99) |
MM | month (01-12) |
DD | day (01-31) |
hh | hour (00-23) |
mm | minute (00-59) |
ss | second (00-59) |
t | tenths of a second (0-9) |
nn | quarter-hour time difference between local time and UTC time (00-48) |
p | "+" or "-" indicating the direction of the time offset in nn |
Relative Time Format is the same 16-character string where "p" should be set to "R" for "relative". For relative time, "tnn" are ignored and thus should be set to a constant value of "000".
Data Type
String
MessageId Property (IPWorks_SMPP Class)
This property indicates the identifier of the most recently sent message.
Object Oriented Interface
public function getMessageId();
Procedural Interface
ipworks_smpp_get($res, 11 );
Default Value
''
Remarks
This property indicates the identifier of the most recently sent message. After a successful call to SendMessage, this property will be set to the server-assigned Id for that message.
This property is read-only and not available at design time.
Data Type
String
MessagePriority Property (IPWorks_SMPP Class)
This property indicates the priority level of the current message.
Object Oriented Interface
public function getMessagePriority(); public function setMessagePriority($value);
Procedural Interface
ipworks_smpp_get($res, 12 ); ipworks_smpp_set($res, 12, $value );
Default Value
1
Remarks
When sending a message, this property will tell the server what type of priority to assign to the message. The effect of the message priority setting depends on the Message Center (MC) manufacturer and the network on which the target recipient lies. For example, some MCs may immediately forward "urgent" messages, some networks may use the priority setting as a visual indicator of the message's urgency (e.g., blinking icons), and some networks may entirely ignore the priority setting.
Data Type
Integer
Password Property (IPWorks_SMPP Class)
This property contains the user's password.
Object Oriented Interface
public function getPassword(); public function setPassword($value);
Procedural Interface
ipworks_smpp_get($res, 13 ); ipworks_smpp_set($res, 13, $value );
Default Value
''
Remarks
This property contains the user's password. When binding to the SMPPServer, the client must provide a known user identifier and a valid password for that Id.
The two ways to bind are (1) by calling Connect with a user identifier and password, which will set the UserId and this property before connecting; or (2) by setting those two properties and calling SendMessage while not connected.
Data Type
String
Protocol Property (IPWorks_SMPP Class)
This property defines the SMPP protocol to be used.
Object Oriented Interface
public function getProtocol(); public function setProtocol($value);
Procedural Interface
ipworks_smpp_get($res, 14 ); ipworks_smpp_set($res, 14, $value );
Default Value
0
Remarks
This property defines the protocol to be used when connecting to the server. Possible values are as follows:
0 (smppSMPP - default) | SMPP for traditional SMPP servers |
1 (smppCIMD2) | CIMD2 for Nokia Short Message Service Center servers |
Data Type
Integer
RecipientCount Property (IPWorks_SMPP Class)
The number of records in the Recipient arrays.
Object Oriented Interface
public function getRecipientCount(); public function setRecipientCount($value);
Procedural Interface
ipworks_smpp_get($res, 15 ); ipworks_smpp_set($res, 15, $value );
Default Value
0
Remarks
This property controls the size of the following arrays:
The array indices start at 0 and end at RecipientCount - 1.This property is not available at design time.
Data Type
Integer
RecipientAddress Property (IPWorks_SMPP Class)
This property contains the email address of a particular recipient.
Object Oriented Interface
public function getRecipientAddress($recipientindex); public function setRecipientAddress($recipientindex, $value);
Procedural Interface
ipworks_smpp_get($res, 16 , $recipientindex); ipworks_smpp_set($res, 16, $value , $recipientindex);
Default Value
''
Remarks
This property contains the email address of a particular recipient. This can be used to set single or multiple recipients. The RecipientType contains the corresponding type.
For a recipient type of normal, the value in the RecipientAddress should be either the dotted IPv4 of an SMS-enabled device or the directory number of a target mobile phone. For distributed lists, the value should be the name of the list as it is stored on the SMPPServer.
The $recipientindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCount property.
This property is not available at design time.
Data Type
String
RecipientType Property (IPWorks_SMPP Class)
This property contains the type of a particular recipient.
Object Oriented Interface
public function getRecipientType($recipientindex); public function setRecipientType($recipientindex, $value);
Procedural Interface
ipworks_smpp_get($res, 17 , $recipientindex); ipworks_smpp_set($res, 17, $value , $recipientindex);
Default Value
0
Remarks
This property contains the type of a particular recipient. This property is used only for multiple recipient messages. The RecipientAddress contains the corresponding recipient's address.
For a recipient type of normal, the value in RecipientAddress should be either the dotted IPv4 of an SMS-enabled device or the directory number of a target mobile phone. For distributed lists, the value should be the name of the list as it is stored on the SMPPServer.
Valid values for RecipientType are as follows:
0 (smppRecipientTypeNormal) | Normal SME (Short Message Entity) Address |
1 (smppRecipientTypeList) | Distribution List |
The $recipientindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCount property.
This property is not available at design time.
Data Type
Integer
ScheduledDelivery Property (IPWorks_SMPP Class)
This property tells the server when to deliver the current message.
Object Oriented Interface
public function getScheduledDelivery(); public function setScheduledDelivery($value);
Procedural Interface
ipworks_smpp_get($res, 18 ); ipworks_smpp_set($res, 18, $value );
Default Value
''
Remarks
This property is used by the class when sending a message to inform the Message Center to forward the message to the intended recipients at a specific time. It can be set using absolute or relative time formats.
Absolute Time Format is a 16-character string represented as "YYMMDDhhmmsstnnp" where:
YY | the last two digits of the year (00-99) |
MM | month (01-12) |
DD | day (01-31) |
hh | hour (00-23) |
mm | minute (00-59) |
ss | second (00-59) |
t | tenths of a second (0-9) |
nn | quarter-hour time difference between local time and UTC time (00-48) |
p | "+" or "-" indicating the direction of the time offset in nn |
Relative Time Format is the same 16-character string where "p" should be set to "R" for "relative". For relative time, "tnn" are ignored and thus should be set to a constant value of "000".
Data Type
String
SenderAddress Property (IPWorks_SMPP Class)
This property contains the address of the External Short Messaging Entity (ESME).
Object Oriented Interface
public function getSenderAddress(); public function setSenderAddress($value);
Procedural Interface
ipworks_smpp_get($res, 19 ); ipworks_smpp_set($res, 19, $value );
Default Value
''
Remarks
This property contains the address of the External Short Messaging Entity (ESME). The SMPP protocol allows an ESME to specify its address, whether it is a phone number or an IP address. If this property is not set, the class will default to the value in LocalHost.
Data Type
String
ServiceType Property (IPWorks_SMPP Class)
This property indicates the type of service for the current message.
Object Oriented Interface
public function getServiceType(); public function setServiceType($value);
Procedural Interface
ipworks_smpp_get($res, 20 ); ipworks_smpp_set($res, 20, $value );
Default Value
0
Remarks
When sending messages, this property is used to define the SMS application service to be associated with the message. The Message Center (MC) will use the value to determine the availability of enhanced messaging services and to control the teleservice used on the air interface.
The values are defined in the SMPP 5.0 specification as follows:
"" (NULL) | MC Default |
CMT | Cellular Messaging |
CPT | Cellular Paging |
VMN | Voice Mail Notification |
VMA | Voice Mail Alerting |
WAP | Wireless Application Protocol |
USSD | Unstructured Supplementary Services Data |
CBS | Cell Broadcast Service |
Data Type
Integer
SMPPPort Property (IPWorks_SMPP Class)
This property contains the server port for secure SMPP (default 2775).
Object Oriented Interface
public function getSMPPPort(); public function setSMPPPort($value);
Procedural Interface
ipworks_smpp_get($res, 21 ); ipworks_smpp_set($res, 21, $value );
Default Value
2775
Remarks
For an implicit Secure Sockets Layer (SSL), use port 3551 (please refer to the SSLStartMode property for more information).
A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.
Data Type
Integer
SMPPServer Property (IPWorks_SMPP Class)
This property is the SMPP entity to which the class will connect.
Object Oriented Interface
public function getSMPPServer(); public function setSMPPServer($value);
Procedural Interface
ipworks_smpp_get($res, 22 ); ipworks_smpp_set($res, 22, $value );
Default Value
''
Remarks
This property is the instant messaging server to which the class will connect when the Connect method is called. This property must contain a valid SMPP service application address.
Data Type
String
SMPPVersion Property (IPWorks_SMPP Class)
This property indicates the SMPP version to be used throughout the connection.
Object Oriented Interface
public function getSMPPVersion(); public function setSMPPVersion($value);
Procedural Interface
ipworks_smpp_get($res, 23 ); ipworks_smpp_set($res, 23, $value );
Default Value
1
Remarks
This property contains the SMPP version to be used throughout the connection.
The default value is version 3.4 because it is the most widely used version of the protocol.
Choosing the highest mutually supported version is generally recommended. Version 3.4 is the default value; however, if version 5.0 is supported, it is recommended.
Data Type
Integer
SSLAcceptServerCertEffectiveDate Property (IPWorks_SMPP Class)
This is the date on which this certificate becomes valid.
Object Oriented Interface
public function getSSLAcceptServerCertEffectiveDate();
Procedural Interface
ipworks_smpp_get($res, 24 );
Default Value
''
Remarks
This is the date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2000 15:00:00.
This property is read-only.
Data Type
String
SSLAcceptServerCertExpirationDate Property (IPWorks_SMPP Class)
This is the date the certificate expires.
Object Oriented Interface
public function getSSLAcceptServerCertExpirationDate();
Procedural Interface
ipworks_smpp_get($res, 25 );
Default Value
''
Remarks
This is the date the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2001 15:00:00.
This property is read-only.
Data Type
String
SSLAcceptServerCertExtendedKeyUsage Property (IPWorks_SMPP Class)
This is a comma-delimited list of extended key usage identifiers.
Object Oriented Interface
public function getSSLAcceptServerCertExtendedKeyUsage();
Procedural Interface
ipworks_smpp_get($res, 26 );
Default Value
''
Remarks
This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).
This property is read-only.
Data Type
String
SSLAcceptServerCertFingerprint Property (IPWorks_SMPP Class)
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertFingerprint();
Procedural Interface
ipworks_smpp_get($res, 27 );
Default Value
''
Remarks
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02
This property is read-only.
Data Type
String
SSLAcceptServerCertFingerprintSHA1 Property (IPWorks_SMPP Class)
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertFingerprintSHA1();
Procedural Interface
ipworks_smpp_get($res, 28 );
Default Value
''
Remarks
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84
This property is read-only.
Data Type
String
SSLAcceptServerCertFingerprintSHA256 Property (IPWorks_SMPP Class)
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertFingerprintSHA256();
Procedural Interface
ipworks_smpp_get($res, 29 );
Default Value
''
Remarks
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53
This property is read-only.
Data Type
String
SSLAcceptServerCertIssuer Property (IPWorks_SMPP Class)
This is the issuer of the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertIssuer();
Procedural Interface
ipworks_smpp_get($res, 30 );
Default Value
''
Remarks
This is the issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.
This property is read-only.
Data Type
String
SSLAcceptServerCertPrivateKey Property (IPWorks_SMPP Class)
This is the private key of the certificate (if available).
Object Oriented Interface
public function getSSLAcceptServerCertPrivateKey();
Procedural Interface
ipworks_smpp_get($res, 31 );
Default Value
''
Remarks
This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.
Note: The SSLAcceptServerCertPrivateKey may be available but not exportable. In this case, SSLAcceptServerCertPrivateKey returns an empty string.
This property is read-only.
Data Type
String
SSLAcceptServerCertPrivateKeyAvailable Property (IPWorks_SMPP Class)
This property shows whether a PrivateKey is available for the selected certificate.
Object Oriented Interface
public function getSSLAcceptServerCertPrivateKeyAvailable();
Procedural Interface
ipworks_smpp_get($res, 32 );
Default Value
false
Remarks
This property shows whether a SSLAcceptServerCertPrivateKey is available for the selected certificate. If SSLAcceptServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).
This property is read-only.
Data Type
Boolean
SSLAcceptServerCertPrivateKeyContainer Property (IPWorks_SMPP Class)
This is the name of the PrivateKey container for the certificate (if available).
Object Oriented Interface
public function getSSLAcceptServerCertPrivateKeyContainer();
Procedural Interface
ipworks_smpp_get($res, 33 );
Default Value
''
Remarks
This is the name of the SSLAcceptServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.
This property is read-only.
Data Type
String
SSLAcceptServerCertPublicKey Property (IPWorks_SMPP Class)
This is the public key of the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertPublicKey();
Procedural Interface
ipworks_smpp_get($res, 34 );
Default Value
''
Remarks
This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.
This property is read-only.
Data Type
String
SSLAcceptServerCertPublicKeyAlgorithm Property (IPWorks_SMPP Class)
This property contains the textual description of the certificate's public key algorithm.
Object Oriented Interface
public function getSSLAcceptServerCertPublicKeyAlgorithm();
Procedural Interface
ipworks_smpp_get($res, 35 );
Default Value
''
Remarks
This property contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLAcceptServerCertPublicKeyLength Property (IPWorks_SMPP Class)
This is the length of the certificate's public key (in bits).
Object Oriented Interface
public function getSSLAcceptServerCertPublicKeyLength();
Procedural Interface
ipworks_smpp_get($res, 36 );
Default Value
0
Remarks
This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.
This property is read-only.
Data Type
Integer
SSLAcceptServerCertSerialNumber Property (IPWorks_SMPP Class)
This is the serial number of the certificate encoded as a string.
Object Oriented Interface
public function getSSLAcceptServerCertSerialNumber();
Procedural Interface
ipworks_smpp_get($res, 37 );
Default Value
''
Remarks
This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.
This property is read-only.
Data Type
String
SSLAcceptServerCertSignatureAlgorithm Property (IPWorks_SMPP Class)
The property contains the text description of the certificate's signature algorithm.
Object Oriented Interface
public function getSSLAcceptServerCertSignatureAlgorithm();
Procedural Interface
ipworks_smpp_get($res, 38 );
Default Value
''
Remarks
The property contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLAcceptServerCertStore Property (IPWorks_SMPP Class)
This is the name of the certificate store for the client certificate.
Object Oriented Interface
public function getSSLAcceptServerCertStore(); public function setSSLAcceptServerCertStore($value);
Procedural Interface
ipworks_smpp_get($res, 39 ); ipworks_smpp_set($res, 39, $value );
Default Value
'MY'
Remarks
This is the name of the certificate store for the client certificate.
The SSLAcceptServerCertStoreType property denotes the type of the certificate store specified by SSLAcceptServerCertStore. If the store is password protected, specify the password in SSLAcceptServerCertStorePassword.
SSLAcceptServerCertStore is used in conjunction with the SSLAcceptServerCertSubject property to specify client certificates. If SSLAcceptServerCertStore has a value, and SSLAcceptServerCertSubject or SSLAcceptServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLAcceptServerCertSubject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
Data Type
Binary String
SSLAcceptServerCertStorePassword Property (IPWorks_SMPP Class)
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Object Oriented Interface
public function getSSLAcceptServerCertStorePassword(); public function setSSLAcceptServerCertStorePassword($value);
Procedural Interface
ipworks_smpp_get($res, 40 ); ipworks_smpp_set($res, 40, $value );
Default Value
''
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Data Type
String
SSLAcceptServerCertStoreType Property (IPWorks_SMPP Class)
This is the type of certificate store for this certificate.
Object Oriented Interface
public function getSSLAcceptServerCertStoreType(); public function setSSLAcceptServerCertStoreType($value);
Procedural Interface
ipworks_smpp_get($res, 41 ); ipworks_smpp_set($res, 41, $value );
Default Value
0
Remarks
This is the type of certificate store for this certificate.
The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: this store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SSLAcceptServerCertStore and set SSLAcceptServerCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
Data Type
Integer
SSLAcceptServerCertSubjectAltNames Property (IPWorks_SMPP Class)
This property contains comma-separated lists of alternative subject names for the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertSubjectAltNames();
Procedural Interface
ipworks_smpp_get($res, 42 );
Default Value
''
Remarks
This property contains comma-separated lists of alternative subject names for the certificate.
This property is read-only.
Data Type
String
SSLAcceptServerCertThumbprintMD5 Property (IPWorks_SMPP Class)
This property contains the MD5 hash of the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertThumbprintMD5();
Procedural Interface
ipworks_smpp_get($res, 43 );
Default Value
''
Remarks
This property contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLAcceptServerCertThumbprintSHA1 Property (IPWorks_SMPP Class)
This property contains the SHA-1 hash of the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertThumbprintSHA1();
Procedural Interface
ipworks_smpp_get($res, 44 );
Default Value
''
Remarks
This property contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLAcceptServerCertThumbprintSHA256 Property (IPWorks_SMPP Class)
This property contains the SHA-256 hash of the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertThumbprintSHA256();
Procedural Interface
ipworks_smpp_get($res, 45 );
Default Value
''
Remarks
This property contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLAcceptServerCertUsage Property (IPWorks_SMPP Class)
This property contains the text description of UsageFlags .
Object Oriented Interface
public function getSSLAcceptServerCertUsage();
Procedural Interface
ipworks_smpp_get($res, 46 );
Default Value
''
Remarks
This property contains the text description of SSLAcceptServerCertUsageFlags.
This value will be of one or more of the following strings and will be separated by commas:
- Digital Signature
- Non-Repudiation
- Key Encipherment
- Data Encipherment
- Key Agreement
- Certificate Signing
- CRL Signing
- Encipher Only
If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.
This property is read-only.
Data Type
String
SSLAcceptServerCertUsageFlags Property (IPWorks_SMPP Class)
This property contains the flags that show intended use for the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertUsageFlags();
Procedural Interface
ipworks_smpp_get($res, 47 );
Default Value
0
Remarks
This property contains the flags that show intended use for the certificate. The value of SSLAcceptServerCertUsageFlags is a combination of the following flags:
0x80 | Digital Signature |
0x40 | Non-Repudiation |
0x20 | Key Encipherment |
0x10 | Data Encipherment |
0x08 | Key Agreement |
0x04 | Certificate Signing |
0x02 | CRL Signing |
0x01 | Encipher Only |
Please see the SSLAcceptServerCertUsage property for a text representation of SSLAcceptServerCertUsageFlags.
This functionality currently is not available when the provider is OpenSSL.
This property is read-only.
Data Type
Integer
SSLAcceptServerCertVersion Property (IPWorks_SMPP Class)
This property contains the certificate's version number.
Object Oriented Interface
public function getSSLAcceptServerCertVersion();
Procedural Interface
ipworks_smpp_get($res, 48 );
Default Value
''
Remarks
This property contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".
This property is read-only.
Data Type
String
SSLAcceptServerCertSubject Property (IPWorks_SMPP Class)
This is the subject of the certificate used for client authentication.
Object Oriented Interface
public function getSSLAcceptServerCertSubject(); public function setSSLAcceptServerCertSubject($value);
Procedural Interface
ipworks_smpp_get($res, 49 ); ipworks_smpp_set($res, 49, $value );
Default Value
''
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
Data Type
String
SSLAcceptServerCertEncoded Property (IPWorks_SMPP Class)
This is the certificate (PEM/Base64 encoded).
Object Oriented Interface
public function getSSLAcceptServerCertEncoded(); public function setSSLAcceptServerCertEncoded($value);
Procedural Interface
ipworks_smpp_get($res, 50 ); ipworks_smpp_set($res, 50, $value );
Default Value
''
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.
When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.
This property is not available at design time.
Data Type
Binary String
SSLCertEffectiveDate Property (IPWorks_SMPP Class)
This is the date on which this certificate becomes valid.
Object Oriented Interface
public function getSSLCertEffectiveDate();
Procedural Interface
ipworks_smpp_get($res, 51 );
Default Value
''
Remarks
This is the date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2000 15:00:00.
This property is read-only.
Data Type
String
SSLCertExpirationDate Property (IPWorks_SMPP Class)
This is the date the certificate expires.
Object Oriented Interface
public function getSSLCertExpirationDate();
Procedural Interface
ipworks_smpp_get($res, 52 );
Default Value
''
Remarks
This is the date the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2001 15:00:00.
This property is read-only.
Data Type
String
SSLCertExtendedKeyUsage Property (IPWorks_SMPP Class)
This is a comma-delimited list of extended key usage identifiers.
Object Oriented Interface
public function getSSLCertExtendedKeyUsage();
Procedural Interface
ipworks_smpp_get($res, 53 );
Default Value
''
Remarks
This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).
This property is read-only.
Data Type
String
SSLCertFingerprint Property (IPWorks_SMPP Class)
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate.
Object Oriented Interface
public function getSSLCertFingerprint();
Procedural Interface
ipworks_smpp_get($res, 54 );
Default Value
''
Remarks
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02
This property is read-only.
Data Type
String
SSLCertFingerprintSHA1 Property (IPWorks_SMPP Class)
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate.
Object Oriented Interface
public function getSSLCertFingerprintSHA1();
Procedural Interface
ipworks_smpp_get($res, 55 );
Default Value
''
Remarks
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84
This property is read-only.
Data Type
String
SSLCertFingerprintSHA256 Property (IPWorks_SMPP Class)
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate.
Object Oriented Interface
public function getSSLCertFingerprintSHA256();
Procedural Interface
ipworks_smpp_get($res, 56 );
Default Value
''
Remarks
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53
This property is read-only.
Data Type
String
SSLCertIssuer Property (IPWorks_SMPP Class)
This is the issuer of the certificate.
Object Oriented Interface
public function getSSLCertIssuer();
Procedural Interface
ipworks_smpp_get($res, 57 );
Default Value
''
Remarks
This is the issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.
This property is read-only.
Data Type
String
SSLCertPrivateKey Property (IPWorks_SMPP Class)
This is the private key of the certificate (if available).
Object Oriented Interface
public function getSSLCertPrivateKey();
Procedural Interface
ipworks_smpp_get($res, 58 );
Default Value
''
Remarks
This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.
Note: The SSLCertPrivateKey may be available but not exportable. In this case, SSLCertPrivateKey returns an empty string.
This property is read-only.
Data Type
String
SSLCertPrivateKeyAvailable Property (IPWorks_SMPP Class)
This property shows whether a PrivateKey is available for the selected certificate.
Object Oriented Interface
public function getSSLCertPrivateKeyAvailable();
Procedural Interface
ipworks_smpp_get($res, 59 );
Default Value
false
Remarks
This property shows whether a SSLCertPrivateKey is available for the selected certificate. If SSLCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).
This property is read-only.
Data Type
Boolean
SSLCertPrivateKeyContainer Property (IPWorks_SMPP Class)
This is the name of the PrivateKey container for the certificate (if available).
Object Oriented Interface
public function getSSLCertPrivateKeyContainer();
Procedural Interface
ipworks_smpp_get($res, 60 );
Default Value
''
Remarks
This is the name of the SSLCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.
This property is read-only.
Data Type
String
SSLCertPublicKey Property (IPWorks_SMPP Class)
This is the public key of the certificate.
Object Oriented Interface
public function getSSLCertPublicKey();
Procedural Interface
ipworks_smpp_get($res, 61 );
Default Value
''
Remarks
This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.
This property is read-only.
Data Type
String
SSLCertPublicKeyAlgorithm Property (IPWorks_SMPP Class)
This property contains the textual description of the certificate's public key algorithm.
Object Oriented Interface
public function getSSLCertPublicKeyAlgorithm();
Procedural Interface
ipworks_smpp_get($res, 62 );
Default Value
''
Remarks
This property contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLCertPublicKeyLength Property (IPWorks_SMPP Class)
This is the length of the certificate's public key (in bits).
Object Oriented Interface
public function getSSLCertPublicKeyLength();
Procedural Interface
ipworks_smpp_get($res, 63 );
Default Value
0
Remarks
This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.
This property is read-only.
Data Type
Integer
SSLCertSerialNumber Property (IPWorks_SMPP Class)
This is the serial number of the certificate encoded as a string.
Object Oriented Interface
public function getSSLCertSerialNumber();
Procedural Interface
ipworks_smpp_get($res, 64 );
Default Value
''
Remarks
This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.
This property is read-only.
Data Type
String
SSLCertSignatureAlgorithm Property (IPWorks_SMPP Class)
The property contains the text description of the certificate's signature algorithm.
Object Oriented Interface
public function getSSLCertSignatureAlgorithm();
Procedural Interface
ipworks_smpp_get($res, 65 );
Default Value
''
Remarks
The property contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLCertStore Property (IPWorks_SMPP Class)
This is the name of the certificate store for the client certificate.
Object Oriented Interface
public function getSSLCertStore(); public function setSSLCertStore($value);
Procedural Interface
ipworks_smpp_get($res, 66 ); ipworks_smpp_set($res, 66, $value );
Default Value
'MY'
Remarks
This is the name of the certificate store for the client certificate.
The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.
SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
Data Type
Binary String
SSLCertStorePassword Property (IPWorks_SMPP Class)
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Object Oriented Interface
public function getSSLCertStorePassword(); public function setSSLCertStorePassword($value);
Procedural Interface
ipworks_smpp_get($res, 67 ); ipworks_smpp_set($res, 67, $value );
Default Value
''
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Data Type
String
SSLCertStoreType Property (IPWorks_SMPP Class)
This is the type of certificate store for this certificate.
Object Oriented Interface
public function getSSLCertStoreType(); public function setSSLCertStoreType($value);
Procedural Interface
ipworks_smpp_get($res, 68 ); ipworks_smpp_set($res, 68, $value );
Default Value
0
Remarks
This is the type of certificate store for this certificate.
The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: this store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SSLCertStore and set SSLCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
Data Type
Integer
SSLCertSubjectAltNames Property (IPWorks_SMPP Class)
This property contains comma-separated lists of alternative subject names for the certificate.
Object Oriented Interface
public function getSSLCertSubjectAltNames();
Procedural Interface
ipworks_smpp_get($res, 69 );
Default Value
''
Remarks
This property contains comma-separated lists of alternative subject names for the certificate.
This property is read-only.
Data Type
String
SSLCertThumbprintMD5 Property (IPWorks_SMPP Class)
This property contains the MD5 hash of the certificate.
Object Oriented Interface
public function getSSLCertThumbprintMD5();
Procedural Interface
ipworks_smpp_get($res, 70 );
Default Value
''
Remarks
This property contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLCertThumbprintSHA1 Property (IPWorks_SMPP Class)
This property contains the SHA-1 hash of the certificate.
Object Oriented Interface
public function getSSLCertThumbprintSHA1();
Procedural Interface
ipworks_smpp_get($res, 71 );
Default Value
''
Remarks
This property contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLCertThumbprintSHA256 Property (IPWorks_SMPP Class)
This property contains the SHA-256 hash of the certificate.
Object Oriented Interface
public function getSSLCertThumbprintSHA256();
Procedural Interface
ipworks_smpp_get($res, 72 );
Default Value
''
Remarks
This property contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLCertUsage Property (IPWorks_SMPP Class)
This property contains the text description of UsageFlags .
Object Oriented Interface
public function getSSLCertUsage();
Procedural Interface
ipworks_smpp_get($res, 73 );
Default Value
''
Remarks
This property contains the text description of SSLCertUsageFlags.
This value will be of one or more of the following strings and will be separated by commas:
- Digital Signature
- Non-Repudiation
- Key Encipherment
- Data Encipherment
- Key Agreement
- Certificate Signing
- CRL Signing
- Encipher Only
If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.
This property is read-only.
Data Type
String
SSLCertUsageFlags Property (IPWorks_SMPP Class)
This property contains the flags that show intended use for the certificate.
Object Oriented Interface
public function getSSLCertUsageFlags();
Procedural Interface
ipworks_smpp_get($res, 74 );
Default Value
0
Remarks
This property contains the flags that show intended use for the certificate. The value of SSLCertUsageFlags is a combination of the following flags:
0x80 | Digital Signature |
0x40 | Non-Repudiation |
0x20 | Key Encipherment |
0x10 | Data Encipherment |
0x08 | Key Agreement |
0x04 | Certificate Signing |
0x02 | CRL Signing |
0x01 | Encipher Only |
Please see the SSLCertUsage property for a text representation of SSLCertUsageFlags.
This functionality currently is not available when the provider is OpenSSL.
This property is read-only.
Data Type
Integer
SSLCertVersion Property (IPWorks_SMPP Class)
This property contains the certificate's version number.
Object Oriented Interface
public function getSSLCertVersion();
Procedural Interface
ipworks_smpp_get($res, 75 );
Default Value
''
Remarks
This property contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".
This property is read-only.
Data Type
String
SSLCertSubject Property (IPWorks_SMPP Class)
This is the subject of the certificate used for client authentication.
Object Oriented Interface
public function getSSLCertSubject(); public function setSSLCertSubject($value);
Procedural Interface
ipworks_smpp_get($res, 76 ); ipworks_smpp_set($res, 76, $value );
Default Value
''
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
Data Type
String
SSLCertEncoded Property (IPWorks_SMPP Class)
This is the certificate (PEM/Base64 encoded).
Object Oriented Interface
public function getSSLCertEncoded(); public function setSSLCertEncoded($value);
Procedural Interface
ipworks_smpp_get($res, 77 ); ipworks_smpp_set($res, 77, $value );
Default Value
''
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.
When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.
This property is not available at design time.
Data Type
Binary String
SSLEnabled Property (IPWorks_SMPP Class)
This property indicates whether Transport Layer Security/Secure Sockets Layer (TLS/SSL) is enabled.
Object Oriented Interface
public function getSSLEnabled(); public function setSSLEnabled($value);
Procedural Interface
ipworks_smpp_get($res, 78 ); ipworks_smpp_set($res, 78, $value );
Default Value
false
Remarks
This property specifies whether TLS/SSL is enabled in the class. When False (default), the class operates in plaintext mode. When True, TLS/SSL is enabled.
TLS/SSL may also be enabled by setting SSLStartMode. Setting SSLStartMode will automatically update this property value.
This property is not available at design time.
Data Type
Boolean
SSLProvider Property (IPWorks_SMPP Class)
This property specifies the Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.
Object Oriented Interface
public function getSSLProvider(); public function setSSLProvider($value);
Procedural Interface
ipworks_smpp_get($res, 79 ); ipworks_smpp_set($res, 79, $value );
Default Value
0
Remarks
This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.
Possible values are as follows:
0 (sslpAutomatic - default) | Automatically selects the appropriate implementation. |
1 (sslpPlatform) | Uses the platform/system implementation. |
2 (sslpInternal) | Uses the internal implementation. |
In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.
When Automatic is selected, on Windows, the class will use the platform implementation. On Linux/macOS, the class will use the internal implementation. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used on all platforms.
Data Type
Integer
SSLServerCertEffectiveDate Property (IPWorks_SMPP Class)
This is the date on which this certificate becomes valid.
Object Oriented Interface
public function getSSLServerCertEffectiveDate();
Procedural Interface
ipworks_smpp_get($res, 80 );
Default Value
''
Remarks
This is the date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2000 15:00:00.
This property is read-only.
Data Type
String
SSLServerCertExpirationDate Property (IPWorks_SMPP Class)
This is the date the certificate expires.
Object Oriented Interface
public function getSSLServerCertExpirationDate();
Procedural Interface
ipworks_smpp_get($res, 81 );
Default Value
''
Remarks
This is the date the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2001 15:00:00.
This property is read-only.
Data Type
String
SSLServerCertExtendedKeyUsage Property (IPWorks_SMPP Class)
This is a comma-delimited list of extended key usage identifiers.
Object Oriented Interface
public function getSSLServerCertExtendedKeyUsage();
Procedural Interface
ipworks_smpp_get($res, 82 );
Default Value
''
Remarks
This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).
This property is read-only.
Data Type
String
SSLServerCertFingerprint Property (IPWorks_SMPP Class)
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate.
Object Oriented Interface
public function getSSLServerCertFingerprint();
Procedural Interface
ipworks_smpp_get($res, 83 );
Default Value
''
Remarks
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02
This property is read-only.
Data Type
String
SSLServerCertFingerprintSHA1 Property (IPWorks_SMPP Class)
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate.
Object Oriented Interface
public function getSSLServerCertFingerprintSHA1();
Procedural Interface
ipworks_smpp_get($res, 84 );
Default Value
''
Remarks
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84
This property is read-only.
Data Type
String
SSLServerCertFingerprintSHA256 Property (IPWorks_SMPP Class)
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate.
Object Oriented Interface
public function getSSLServerCertFingerprintSHA256();
Procedural Interface
ipworks_smpp_get($res, 85 );
Default Value
''
Remarks
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53
This property is read-only.
Data Type
String
SSLServerCertIssuer Property (IPWorks_SMPP Class)
This is the issuer of the certificate.
Object Oriented Interface
public function getSSLServerCertIssuer();
Procedural Interface
ipworks_smpp_get($res, 86 );
Default Value
''
Remarks
This is the issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.
This property is read-only.
Data Type
String
SSLServerCertPrivateKey Property (IPWorks_SMPP Class)
This is the private key of the certificate (if available).
Object Oriented Interface
public function getSSLServerCertPrivateKey();
Procedural Interface
ipworks_smpp_get($res, 87 );
Default Value
''
Remarks
This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.
Note: The SSLServerCertPrivateKey may be available but not exportable. In this case, SSLServerCertPrivateKey returns an empty string.
This property is read-only.
Data Type
String
SSLServerCertPrivateKeyAvailable Property (IPWorks_SMPP Class)
This property shows whether a PrivateKey is available for the selected certificate.
Object Oriented Interface
public function getSSLServerCertPrivateKeyAvailable();
Procedural Interface
ipworks_smpp_get($res, 88 );
Default Value
false
Remarks
This property shows whether a SSLServerCertPrivateKey is available for the selected certificate. If SSLServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).
This property is read-only.
Data Type
Boolean
SSLServerCertPrivateKeyContainer Property (IPWorks_SMPP Class)
This is the name of the PrivateKey container for the certificate (if available).
Object Oriented Interface
public function getSSLServerCertPrivateKeyContainer();
Procedural Interface
ipworks_smpp_get($res, 89 );
Default Value
''
Remarks
This is the name of the SSLServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.
This property is read-only.
Data Type
String
SSLServerCertPublicKey Property (IPWorks_SMPP Class)
This is the public key of the certificate.
Object Oriented Interface
public function getSSLServerCertPublicKey();
Procedural Interface
ipworks_smpp_get($res, 90 );
Default Value
''
Remarks
This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.
This property is read-only.
Data Type
String
SSLServerCertPublicKeyAlgorithm Property (IPWorks_SMPP Class)
This property contains the textual description of the certificate's public key algorithm.
Object Oriented Interface
public function getSSLServerCertPublicKeyAlgorithm();
Procedural Interface
ipworks_smpp_get($res, 91 );
Default Value
''
Remarks
This property contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLServerCertPublicKeyLength Property (IPWorks_SMPP Class)
This is the length of the certificate's public key (in bits).
Object Oriented Interface
public function getSSLServerCertPublicKeyLength();
Procedural Interface
ipworks_smpp_get($res, 92 );
Default Value
0
Remarks
This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.
This property is read-only.
Data Type
Integer
SSLServerCertSerialNumber Property (IPWorks_SMPP Class)
This is the serial number of the certificate encoded as a string.
Object Oriented Interface
public function getSSLServerCertSerialNumber();
Procedural Interface
ipworks_smpp_get($res, 93 );
Default Value
''
Remarks
This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.
This property is read-only.
Data Type
String
SSLServerCertSignatureAlgorithm Property (IPWorks_SMPP Class)
The property contains the text description of the certificate's signature algorithm.
Object Oriented Interface
public function getSSLServerCertSignatureAlgorithm();
Procedural Interface
ipworks_smpp_get($res, 94 );
Default Value
''
Remarks
The property contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLServerCertStore Property (IPWorks_SMPP Class)
This is the name of the certificate store for the client certificate.
Object Oriented Interface
public function getSSLServerCertStore();
Procedural Interface
ipworks_smpp_get($res, 95 );
Default Value
'MY'
Remarks
This is the name of the certificate store for the client certificate.
The SSLServerCertStoreType property denotes the type of the certificate store specified by SSLServerCertStore. If the store is password protected, specify the password in SSLServerCertStorePassword.
SSLServerCertStore is used in conjunction with the SSLServerCertSubject property to specify client certificates. If SSLServerCertStore has a value, and SSLServerCertSubject or SSLServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLServerCertSubject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
This property is read-only.
Data Type
Binary String
SSLServerCertStorePassword Property (IPWorks_SMPP Class)
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Object Oriented Interface
public function getSSLServerCertStorePassword();
Procedural Interface
ipworks_smpp_get($res, 96 );
Default Value
''
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
This property is read-only.
Data Type
String
SSLServerCertStoreType Property (IPWorks_SMPP Class)
This is the type of certificate store for this certificate.
Object Oriented Interface
public function getSSLServerCertStoreType();
Procedural Interface
ipworks_smpp_get($res, 97 );
Default Value
0
Remarks
This is the type of certificate store for this certificate.
The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: this store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SSLServerCertStore and set SSLServerCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
This property is read-only.
Data Type
Integer
SSLServerCertSubjectAltNames Property (IPWorks_SMPP Class)
This property contains comma-separated lists of alternative subject names for the certificate.
Object Oriented Interface
public function getSSLServerCertSubjectAltNames();
Procedural Interface
ipworks_smpp_get($res, 98 );
Default Value
''
Remarks
This property contains comma-separated lists of alternative subject names for the certificate.
This property is read-only.
Data Type
String
SSLServerCertThumbprintMD5 Property (IPWorks_SMPP Class)
This property contains the MD5 hash of the certificate.
Object Oriented Interface
public function getSSLServerCertThumbprintMD5();
Procedural Interface
ipworks_smpp_get($res, 99 );
Default Value
''
Remarks
This property contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLServerCertThumbprintSHA1 Property (IPWorks_SMPP Class)
This property contains the SHA-1 hash of the certificate.
Object Oriented Interface
public function getSSLServerCertThumbprintSHA1();
Procedural Interface
ipworks_smpp_get($res, 100 );
Default Value
''
Remarks
This property contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLServerCertThumbprintSHA256 Property (IPWorks_SMPP Class)
This property contains the SHA-256 hash of the certificate.
Object Oriented Interface
public function getSSLServerCertThumbprintSHA256();
Procedural Interface
ipworks_smpp_get($res, 101 );
Default Value
''
Remarks
This property contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLServerCertUsage Property (IPWorks_SMPP Class)
This property contains the text description of UsageFlags .
Object Oriented Interface
public function getSSLServerCertUsage();
Procedural Interface
ipworks_smpp_get($res, 102 );
Default Value
''
Remarks
This property contains the text description of SSLServerCertUsageFlags.
This value will be of one or more of the following strings and will be separated by commas:
- Digital Signature
- Non-Repudiation
- Key Encipherment
- Data Encipherment
- Key Agreement
- Certificate Signing
- CRL Signing
- Encipher Only
If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.
This property is read-only.
Data Type
String
SSLServerCertUsageFlags Property (IPWorks_SMPP Class)
This property contains the flags that show intended use for the certificate.
Object Oriented Interface
public function getSSLServerCertUsageFlags();
Procedural Interface
ipworks_smpp_get($res, 103 );
Default Value
0
Remarks
This property contains the flags that show intended use for the certificate. The value of SSLServerCertUsageFlags is a combination of the following flags:
0x80 | Digital Signature |
0x40 | Non-Repudiation |
0x20 | Key Encipherment |
0x10 | Data Encipherment |
0x08 | Key Agreement |
0x04 | Certificate Signing |
0x02 | CRL Signing |
0x01 | Encipher Only |
Please see the SSLServerCertUsage property for a text representation of SSLServerCertUsageFlags.
This functionality currently is not available when the provider is OpenSSL.
This property is read-only.
Data Type
Integer
SSLServerCertVersion Property (IPWorks_SMPP Class)
This property contains the certificate's version number.
Object Oriented Interface
public function getSSLServerCertVersion();
Procedural Interface
ipworks_smpp_get($res, 104 );
Default Value
''
Remarks
This property contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".
This property is read-only.
Data Type
String
SSLServerCertSubject Property (IPWorks_SMPP Class)
This is the subject of the certificate used for client authentication.
Object Oriented Interface
public function getSSLServerCertSubject();
Procedural Interface
ipworks_smpp_get($res, 105 );
Default Value
''
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
This property is read-only.
Data Type
String
SSLServerCertEncoded Property (IPWorks_SMPP Class)
This is the certificate (PEM/Base64 encoded).
Object Oriented Interface
public function getSSLServerCertEncoded();
Procedural Interface
ipworks_smpp_get($res, 106 );
Default Value
''
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.
When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.
This property is read-only and not available at design time.
Data Type
Binary String
SSLStartMode Property (IPWorks_SMPP Class)
This property determines how the class starts the Secure Sockets Layer (SSL) negotiation.
Object Oriented Interface
public function getSSLStartMode(); public function setSSLStartMode($value);
Procedural Interface
ipworks_smpp_get($res, 107 ); ipworks_smpp_set($res, 107, $value );
Default Value
3
Remarks
The SSLStartMode property may have one of the following values:
0 (sslAutomatic) | If the remote port is set to the standard plaintext port of the protocol (where applicable), the class will behave the same as if SSLStartMode is set to sslExplicit. In all other cases, SSL negotiation will be implicit (sslImplicit). |
1 (sslImplicit) | The SSL negotiation will start immediately after the connection is established. |
2 (sslExplicit) | The class will first connect in plaintext, and then will explicitly start SSL negotiation through a protocol command such as STARTTLS. |
3 (sslNone - default) | No SSL negotiation; no SSL security. All communication will be in plaintext mode. |
Data Type
Integer
SystemType Property (IPWorks_SMPP Class)
This property contains a string representing the type of system during a connection.
Object Oriented Interface
public function getSystemType(); public function setSystemType($value);
Procedural Interface
ipworks_smpp_get($res, 108 ); ipworks_smpp_set($res, 108, $value );
Default Value
''
Remarks
This property contains a string representing the type of system during a connection. Some SMS servers require that a system type be supplied during connection. The system type is a string representation, usually as an abbreviation, of a particular kind of system. The string cannot exceed 12 bytes.
Data Type
String
Timeout Property (IPWorks_SMPP Class)
This property includes the timeout for the class.
Object Oriented Interface
public function getTimeout(); public function setTimeout($value);
Procedural Interface
ipworks_smpp_get($res, 109 ); ipworks_smpp_set($res, 109, $value );
Default Value
60
Remarks
If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.
If Timeout is set to a positive value, the class will wait for the operation to complete before returning control.
The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.
If Timeout expires, and the operation is not yet complete, the class fails with an error.
Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.
The default value for the Timeout property is 60 seconds.
Data Type
Integer
UserId Property (IPWorks_SMPP Class)
This property is used for identification with the SMPP service.
Object Oriented Interface
public function getUserId(); public function setUserId($value);
Procedural Interface
ipworks_smpp_get($res, 110 ); ipworks_smpp_set($res, 110, $value );
Default Value
''
Remarks
This property is used for identification with the SMPP service. When binding to the SMPPServer, the client must provide a known user identifier and a valid password for that Id.
The two ways to bind are (1) by calling Connect with a user Id and password, which will set the UserId and Password properties before connecting; or (2) by setting those two properties and calling SendMessage while not connected.
Data Type
String
AddRecipient Method (IPWorks_SMPP Class)
This method will add a recipient of the specified type to the recipient list.
Object Oriented Interface
public function doAddRecipient($recipienttype, $recipientaddress);
Procedural Interface
ipworks_smpp_do_addrecipient($res, $recipienttype, $recipientaddress);
Remarks
This method will add a recipient of the specified type to the recipient list. For normal-type recipients, the addresses should be either a dotted IPv4 address (for sending messages to other SMS-enabled applications) or the directory number of a mobile phone. To send messages to distributed lists, the name of the list should be used.
Valid values for RecipientType are as follows:
0 (smppRecipientTypeNormal) | Normal SME (Short Message Entity) Address |
1 (smppRecipientTypeList) | Distribution List |
CancelMessage Method (IPWorks_SMPP Class)
This method will cancel the specified message.
Object Oriented Interface
public function doCancelMessage($messageid);
Procedural Interface
ipworks_smpp_do_cancelmessage($res, $messageid);
Remarks
This method will cancel the message stored on the SMPPServer under the value in MessageId.
CheckLink Method (IPWorks_SMPP Class)
This method will check the connection to the server.
Object Oriented Interface
public function doCheckLink();
Procedural Interface
ipworks_smpp_do_checklink($res);
Remarks
This method will check the connection to the server. This method is used to ensure that the host on the other end of the connection is still active, or that it is still available. Although a socket connection may still be available between the client and server, the SMS application on the server may have been taken offline without releasing the socket or the CPU may be bogged down. This method will send a PDU to the server and wait the length of Timeout for a response.
CheckMessageStatus Method (IPWorks_SMPP Class)
This method will retrieve the status of the specified message.
Object Oriented Interface
public function doCheckMessageStatus($messageid);
Procedural Interface
ipworks_smpp_do_checkmessagestatus($res, $messageid);
Remarks
This method will retrieve the last known status of the message stored on the server under MessageId. The class will fire a MessageStatus containing the parsed response from the server.
Config Method (IPWorks_SMPP Class)
Sets or retrieves a configuration setting.
Object Oriented Interface
public function doConfig($configurationstring);
Procedural Interface
ipworks_smpp_do_config($res, $configurationstring);
Remarks
Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.
These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.
To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).
To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.
Connect Method (IPWorks_SMPP Class)
This method will bind as a transceiver to the SMPP service.
Object Oriented Interface
public function doConnect();
Procedural Interface
ipworks_smpp_do_connect($res);
Remarks
This method will establish a socket connection to the SMPPServer and attempt to bind as a transceiver. Once the bind operation has been completed, a Connected event will be fired containing the status of the connection.
ConnectTo Method (IPWorks_SMPP Class)
This method will bind as a transceiver to the SMPP service.
Object Oriented Interface
public function doConnectTo($userid, $password);
Procedural Interface
ipworks_smpp_do_connectto($res, $userid, $password);
Remarks
This method will establish a socket connection to the SMPPServer and attempt to bind as a transceiver. Once the bind operation has completed, a Connected event will be fired containing the status of the connection.
Disconnect Method (IPWorks_SMPP Class)
This method will disconnect from the SMPP service.
Object Oriented Interface
public function doDisconnect();
Procedural Interface
ipworks_smpp_do_disconnect($res);
Remarks
This method will send an unbind command and close the socket connection to the SMPPServer. After an unbind operation and socket closing, a Disconnected event will be fired containing the status of the unbind operation.
DoEvents Method (IPWorks_SMPP Class)
This method processes events from the internal message queue.
Object Oriented Interface
public function doEvents();
Procedural Interface
ipworks_smpp_do_doevents($res);
Remarks
When this method is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.
Interrupt Method (IPWorks_SMPP Class)
This method interrupts the current method.
Object Oriented Interface
public function doInterrupt();
Procedural Interface
ipworks_smpp_do_interrupt($res);
Remarks
If there is no method in progress, Interrupt simply returns, doing nothing.
ReplaceMessage Method (IPWorks_SMPP Class)
This method replaces a previously sent message with a new one.
Object Oriented Interface
public function doReplaceMessage($messageid, $newmessage);
Procedural Interface
ipworks_smpp_do_replacemessage($res, $messageid, $newmessage);
Remarks
Assuming that a message on the SMPPServer is being stored under the value in MessageId, this method will replace that message with the value in NewMessage.
If no message corresponds to MessageId, the SMS service will respond with an error message.
Reset Method (IPWorks_SMPP Class)
This method will reset the class.
Object Oriented Interface
public function doReset();
Procedural Interface
ipworks_smpp_do_reset($res);
Remarks
This method will reset the class's properties to their default values.
SendCommand Method (IPWorks_SMPP Class)
This method will format and send a protocol data unit (PDU) using the specified command identifier and payload.
Object Oriented Interface
public function doSendCommand($commandid, $payload);
Procedural Interface
ipworks_smpp_do_sendcommand($res, $commandid, $payload);
Remarks
This method offers a way to do more with the class than is directly supported. This method takes a command identifier and a payload, which includes every required and optional field after the header, and creates the 16-byte header for it before sending it to the server. The response PDU is returned both in the PITrail and by this method.
SendData Method (IPWorks_SMPP Class)
This method sends raw data to Recipients .
Object Oriented Interface
public function doSendData($data);
Procedural Interface
ipworks_smpp_do_senddata($res, $data);
Remarks
This method sends raw data to Recipients. Up to 64 KB of additional data can be supplied at a time for transmission to the SMPPServer. Unlike the SendMessage method, this method can send to only one destination at a time. The target is whatever value is in the Recipients properties.
SendMessage Method (IPWorks_SMPP Class)
This method sends a message to all recipients in the recipient list.
Object Oriented Interface
public function doSendMessage($message);
Procedural Interface
ipworks_smpp_do_sendmessage($res, $message);
Remarks
This method sends a message to all recipients in the recipient list. The return value of this method is the server-assigned identifier of the message. The maximum size of the message sent is 256 bytes.
Connected Event (IPWorks_SMPP Class)
This event is fired after a successful bind operation.
Object Oriented Interface
public function fireConnected($param);
Procedural Interface
ipworks_smpp_register_callback($res, 1, array($this, 'fireConnected'));
Parameter List
'statuscode'
'description'
Remarks
After establishing a socket connection to the SMPPServer, the class will attempt to send a bind as a transmitter command. Upon completion of this operation, the server will respond with either a success or failure state, which will be reflected in the Connected event's parameters.
StatusCode will contain the command status (error code) returned by the server. For a StatusCode of 0, Description will be OK. Otherwise, it will contain a standard interpretation of the error.
ConnectionStatus Event (IPWorks_SMPP Class)
This event is fired to indicate changes in the connection state.
Object Oriented Interface
public function fireConnectionStatus($param);
Procedural Interface
ipworks_smpp_register_callback($res, 2, array($this, 'fireConnectionStatus'));
Parameter List
'connectionevent'
'statuscode'
'description'
Remarks
The ConnectionStatus event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.
The ConnectionEvent parameter indicates the type of connection event. Values may include the following:
Firewall connection complete. | |
Secure Sockets Layer (SSL) or S/Shell handshake complete (where applicable). | |
Remote host connection complete. | |
Remote host disconnected. | |
SSL or S/Shell connection broken. | |
Firewall host disconnected. |
Disconnected Event (IPWorks_SMPP Class)
This event is fired when connection to the SMS service is lost.
Object Oriented Interface
public function fireDisconnected($param);
Procedural Interface
ipworks_smpp_register_callback($res, 3, array($this, 'fireDisconnected'));
Parameter List
'statuscode'
'description'
Remarks
After sending an unbind operation to the server, this event will be fired containing the results of that operation. This event may also be fired if the socket connection to the service is lost.
If the event was fired because of an unbind operation, StatusCode will contain the command status set by the server. Otherwise, it will contain the socket code for the type of disconnection. For a status code value of 0, Description will contain OK. Otherwise, it will contain a standard interpretation of the value in StatusCode.
Error Event (IPWorks_SMPP Class)
This event is fired when the server detects an error.
Object Oriented Interface
public function fireError($param);
Procedural Interface
ipworks_smpp_register_callback($res, 4, array($this, 'fireError'));
Parameter List
'errorcode'
'description'
Remarks
If the server sends an error not related to a command sent from the class, the class will fire an Error event containing information related to the error.
ErrorCode will contain the code sent by the server, and Description will contain a standard interpretation of that code.
MessageIn Event (IPWorks_SMPP Class)
This event is fired upon receipt of a message.
Object Oriented Interface
public function fireMessageIn($param);
Procedural Interface
ipworks_smpp_register_callback($res, 5, array($this, 'fireMessageIn'));
Parameter List
'sourceaddress'
'scheduledeliverytime'
'validityperiod'
'message'
'messagepart'
'messagepartcount'
'messagepartreference'
'destinationaddress'
'responseerrorcode'
Remarks
When a message is received, the SMPP class will parse the sender's message into the SourceAddress, ScheduleDeliveryTime, ValidityPeriod, and Message fields.
The SourceAddress parameter is the address of the originator of the message.
The DestinationAddress parameter holds the address of the recipient.
The ScheduleDeliveryTime parameter is the delivery time at which the short message is scheduled to be forwarded to another Message Center (MC). This will be an empty string if it is not scheduled.
The ValidityPeriod parameter is applicable only if this short message is being forwarded to another MC. When this occurs, it specifies how long the receiving MC should retain the Short Message (SM) and continue trying to deliver it. This will be an empty string if the current validity period is unavailable.
The Message parameter is the plaintext portion of the message body.
If the incoming message is a part of a larger message (the message was split up into several parts), the MessagePartCount, MessagePart, and MessagePartReference parameters will be set. MessagePartCount will hold the total number of parts for the message. MessagePart will indicate the current part's location in the message to determine the order when reassembling the message. This will be a value from 1 to MessagePartCount. MessagePartReference holds a reference value that will be the same across all parts for the message.
The ResponseErrorCode parameter may be set to return an error condition to the server. This corresponds to the command_status protocol-level field of the response.
MessageStatus Event (IPWorks_SMPP Class)
This event is fired upon receipt of a message.
Object Oriented Interface
public function fireMessageStatus($param);
Procedural Interface
ipworks_smpp_register_callback($res, 6, array($this, 'fireMessageStatus'));
Parameter List
'messageid'
'messagestate'
'messageerror'
'finaldate'
Remarks
When a CheckMessageStatus is called, the SMPP class will retrieve the status of the message represented by MessageId from the server, parse the response, and fire MessageStatus.
MessageState represents the last known state the message was left in on the SMPPServer. This code is version specific. For v3.4:
1 | ENROUTE, the message is en route. |
2 | DELIVERED, the message is delivered. |
3 | EXPIRED, the message validity period expired. |
4 | DELETED, the message has been deleted. |
5 | UNDELIVERABLE, the message is undeliverable. |
6 | ACCEPTED, the message has been read on behalf of subscriber by customer service. |
7 | UNKNOWN, the message is in an invalid state. |
8 | REJECTED, the message is in a rejected state. |
0 | SCHEDULED, the message is scheduled for delivery, but it has not yet been delivered. |
1 | ENROUTE, the message is en route. |
2 | DELIVERED, the message is delivered. |
3 | EXPIRED, the message validity period expired. |
4 | DELETED, the message has been deleted. |
5 | UNDELIVERABLE, the message is undeliverable. |
6 | ACCEPTED, the message has been read on behalf of subscriber by customer service. |
7 | UNKNOWN, the message is in an invalid state. |
8 | REJECTED, the message is in a rejected state. |
9 | SKIPPED, the message was accepted but not delivered. |
MessageError will contain an error code representing any failure encountered during message delivery. This code may be vendor-specific.
FinalDate contains a human-readable string representing the date on which the message was delivered. If the message was not delivered, this parameter will be empty.
PITrail Event (IPWorks_SMPP Class)
This event is fired once for each protocol data unit (PDU) sent between the client and server.
Object Oriented Interface
public function firePITrail($param);
Procedural Interface
ipworks_smpp_register_callback($res, 7, array($this, 'firePITrail'));
Parameter List
'direction'
'pdu'
'commandlength'
'commandid'
'commanddescription'
'commandstatus'
'sequencenumber'
Remarks
Whenever either the class or the SMPPServer sends any data across the connection, the class will fire a PITrail event containing that data. It will usually be in SMPP-PDU format.
A PDU will contain at least the SMPP header, which is always 16 bytes long. The first four bytes represent the total length of the PDU, including the 16-byte header. The next four bytes are the command Id associated with the PDU. The command Id of a response PDU is always the command Id to which it is responding plus 0x80000000.
The class parses the values contained in the PDU header into the appropriate fields. The CommandLength, CommandId, CommandStatus, and SequenceNumber parameters contain these parsed values.
The third set of four bytes are the command status (status code) of the command. All originating commands will have a status code of 0x00000000, which will be ignored by the receiver. The field is only set in response PDUs to indicate the status of the originating command. The final four bytes represent the sequence number of the command. All response PDUs will contain the same sequence number as the originating command.
ReadyToSend Event (IPWorks_SMPP Class)
This event is fired when the class is ready to send data.
Object Oriented Interface
public function fireReadyToSend($param);
Procedural Interface
ipworks_smpp_register_callback($res, 8, array($this, 'fireReadyToSend'));
Parameter List
Remarks
The ReadyToSend event indicates that the underlying Transmission Control Protocol (TCP)/IP subsystem is ready to accept data after a failed SendBytes. This event also is fired immediately after a connection to the remote host is established.
SSLServerAuthentication Event (IPWorks_SMPP Class)
Fired after the server presents its certificate to the client.
Object Oriented Interface
public function fireSSLServerAuthentication($param);
Procedural Interface
ipworks_smpp_register_callback($res, 9, array($this, 'fireSSLServerAuthentication'));
Parameter List
'certencoded'
'certsubject'
'certissuer'
'status'
'accept'
Remarks
During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.
When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.
SSLStatus Event (IPWorks_SMPP Class)
Fired when secure connection progress messages are available.
Object Oriented Interface
public function fireSSLStatus($param);
Procedural Interface
ipworks_smpp_register_callback($res, 10, array($this, 'fireSSLStatus'));
Parameter List
'message'
Remarks
The event is fired for informational and logging purposes only. This event tracks the progress of the connection.
Config Settings (SMPP Class)
The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.SMPP Config Settings
Note 1: For IP addresses, it is only possible to specify a single IP address. A range of IP addresses is not allowed. IP version 6.0 is not currently supported in this version of the protocol.
Note 2: It is likely that the addr_range field is not supported or deliberately ignored on most Message Centers (MCs). Most carriers will not allow an ESME to control the message routing because this can carry the risk of incorrectly routing messages. In such circumstances, the ESME will be requested to set the field to NULL.
- One two-byte integer containing the parameter type (tag).
- One two-byte integer indicating the length of the data contained in this parameter.
- The variable-length parameter data itself.
For instance, to add a gn_lookup_userdata parameter, the type/tag is decimal 5633 (that's 0x1601 in hex), and the data in this example is "Hello World", which is 11 characters in length. So the TLV is as follows: 5633 + 11 + "Hello World", or 0x16 0x01 0x00 0x0b and then the ASCII text "Hello World". When hex-encoded, this yields the string "1601000b48656c6c6f20576f726c64". This is the value you would then use to set the CustomTLV configuration setting. You are not restricted to only one optional parameter. Multiple TLV parameters may be concatenated together.
Note: This is advanced functionality, and the class does not verify the data in this configuration setting before transmission. After the class internally decodes the string back into binary, it is passed on inside the protocol data unit (PDU) as-is without validation or modification.
This configuration setting is applicable only when using the SendMessage or SendData methods.
0 | MC Specific encoding |
1 | IA5 (CCITT T.50)/ASCII (ANSI X3.4) |
2 | Octet unspecified (8-bit binary) |
3 | Latin 1 (ISO-8859-1) |
4 | Octet unspecified (8-bit binary) |
5 | JIS (X 0208-1990) |
6 | Cyrillic (ISO-8859-5) |
7 | Latin/Hebrew (ISO-8859-8) |
8 | UCS2 (ISO/IEC-10646) |
9 | Pictogram Encoding |
10 | ISO-2022-JP (Music Codes) |
11 | Reserved |
12 | Reserved 2 |
13 | Extended Kanji JIS (X 0212-1990) |
14 | KS C 5601 |
[UDH1],[MessagePart1];[UDH2],[MessagePart2];[UDH3],[MessagePart3]
Note: When using HexString, DataCoding must be set to 8, and the value provided to this configuration setting should be the UTF-16 hex-encoded message.
0 | No MC Delivery Receipt requested (default). |
1 | MC Delivery Receipt is requested after final delivery (success or failure). |
2 | MC Delivery Receipt is requested after a failed delivery. |
3 | MC Delivery Receipt is requested after a successful delivery. |
Note: This is applicable only within the MessageIn event.
0 | Default SMSC Mode (e.g., Store and Forward). |
1 | Datagram mode. |
2 | Forward (i.e., Transaction) mode. |
3 | Store and Forward mode. |
0 | Default message Type (i.e., normal message). |
1 | Short Message contains MC Delivery Receipt. |
2 | Short Message contains Intermediate Delivery Notification. |
0 | Raw (Default) |
1 | Hex string |
2 | Verbose |
0 | No SME acknowledgment requested (default). |
1 | SME delivery acknowledgment is requested. |
2 | SME manual/user acknowledgment is requested. |
3 | Both delivery and manual/user acknowledgment is requested. |
Unknown (0) | |
ISDN (1) | |
Data (3) | |
Telex (4) | |
LandMobile (6) | |
National (8) | |
Private (9) | |
ERMES (10) | |
Internet (14) | |
WAP (18) |
Unknown (0) | The number type is unknown |
International (1) | The number includes the international trunk prefix |
National (2) | The number includes the national trunk prefix |
NetworkSpecific (3) | The number exists on a network that uses a specific delivery protocol |
SubscriberNumber (4) | The number is just the subscriber number, without prefixes |
Alphanumeric (5) | The address is human-readable (contains letters and digits) |
Abbreviated (6) | The number is abbreviated |
Note: This is valid only for GSM networks.
When receiving a message that has been split, the MessageIn event provides parameters to reassemble the message.
0 | UDH (Default) |
1 | SAR |
1 | Temporary Error |
2 | Validity Period Expired |
4 | Delivery Failed |
8 | Delivery Successful |
16 | Message Canceled |
32 | Message Deleted By The Operator |
This configuration setting is applicable only when Protocol is set to smppCIMD2.
This configuration setting applies only when UseGSM7BitEncoding is True.
TCPClient Config Settings
If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.
Note: This setting is provided for use by classs that do not directly expose Firewall properties.
Note: This setting is provided for use by classs that do not directly expose Firewall properties.
Note: This configuration setting is provided for use by classs that do not directly expose Firewall properties.
0 | No firewall (default setting). |
1 | Connect through a tunneling proxy. FirewallPort is set to 80. |
2 | Connect through a SOCKS4 Proxy. FirewallPort is set to 1080. |
3 | Connect through a SOCKS5 Proxy. FirewallPort is set to 1080. |
10 | Connect through a SOCKS4A Proxy. FirewallPort is set to 1080. |
Note: This setting is provided for use by classs that do not directly expose Firewall properties.
Note: This setting is provided for use by classs that do not directly expose Firewall properties.
Note: This value is not applicable in macOS.
In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.
In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.
The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the class returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).
Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.
In multihomed hosts (machines with more than one IP interface), setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.
If the class is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).
Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.
LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.
This configuration setting is useful when trying to connect to services that require a trusted port on the client side. An example is the remote shell (rsh) service in UNIX systems.
If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.
If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.
The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.
www.google.com;www.nsoftware.com
Note: This value is not applicable in Java.
By default, this configuration setting is set to False.
0 | IPv4 only |
1 | IPv6 only |
2 | IPv6 with IPv4 fallback |
SSL Config Settings
When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.
Enabling this configuration setting has no effect if SSLProvider is set to Platform.
The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g., 9d66eef0.0, 9d66eef0.1). OpenSSL recommends the use of the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.
The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by the following sequences:
-----BEGIN CERTIFICATE-----
... (CA certificate in base64 encoding) ...
-----END CERTIFICATE-----
Before, between, and after the certificate text is allowed, which can be used, for example, for descriptions of the certificates. Refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.
The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".
By default, OpenSSL uses the device file "/dev/urandom" to seed the PRNG, and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.
If set to True, the class will reuse the context if and only if the following criteria are met:
- The target host name is the same.
- The system cache entry has not expired (default timeout is 10 hours).
- The application process that calls the function is the same.
- The logon session is the same.
- The instance of the class is the same.
The value is formatted as a list of paths separated by semicolons. The class will check for the existence of each file in the order specified. When a file is found, the CA certificates within the file will be loaded and used to determine the validity of server or client certificates.
The default value is as follows:
/etc/ssl/ca-bundle.pem;/etc/pki/tls/certs/ca-bundle.crt;/etc/ssl/certs/ca-certificates.crt;/etc/pki/tls/cacert.pem
-----BEGIN CERTIFICATE----- MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw ... Intermedaite Cert ... eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w F0I1XhM+pKj7FjDr+XNj -----END CERTIFICATE----- \r \n -----BEGIN CERTIFICATE----- MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp ... Root Cert ... d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA -----END CERTIFICATE-----
When set to 0 (default), the CRL check will not be performed by the class. When set to 1, it will attempt to perform the CRL check, but it will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.
This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems.
When set to 0 (default), the class will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but it will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.
This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems.
Note: This configuration setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.
Use this configuration setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.
When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList configuration setting.
The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:
-----BEGIN CERTIFICATE----- MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw ... Intermediate Cert ... eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w F0I1XhM+pKj7FjDr+XNj -----END CERTIFICATE----- \r \n -----BEGIN CERTIFICATE----- MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp ... Root Cert ... d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA -----END CERTIFICATE-----
By default, the enabled cipher suites will include all available ciphers ("*").
The special value "*" means that the class will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.
Multiple cipher suites are separated by semicolons.
Example values when SSLProvider is set to Platform include the following:
obj.config("SSLEnabledCipherSuites=*");
obj.config("SSLEnabledCipherSuites=CALG_AES_256");
obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES");
Possible values when SSLProvider is set to Platform include the following:
- CALG_3DES
- CALG_3DES_112
- CALG_AES
- CALG_AES_128
- CALG_AES_192
- CALG_AES_256
- CALG_AGREEDKEY_ANY
- CALG_CYLINK_MEK
- CALG_DES
- CALG_DESX
- CALG_DH_EPHEM
- CALG_DH_SF
- CALG_DSS_SIGN
- CALG_ECDH
- CALG_ECDH_EPHEM
- CALG_ECDSA
- CALG_ECMQV
- CALG_HASH_REPLACE_OWF
- CALG_HUGHES_MD5
- CALG_HMAC
- CALG_KEA_KEYX
- CALG_MAC
- CALG_MD2
- CALG_MD4
- CALG_MD5
- CALG_NO_SIGN
- CALG_OID_INFO_CNG_ONLY
- CALG_OID_INFO_PARAMETERS
- CALG_PCT1_MASTER
- CALG_RC2
- CALG_RC4
- CALG_RC5
- CALG_RSA_KEYX
- CALG_RSA_SIGN
- CALG_SCHANNEL_ENC_KEY
- CALG_SCHANNEL_MAC_KEY
- CALG_SCHANNEL_MASTER_HASH
- CALG_SEAL
- CALG_SHA
- CALG_SHA1
- CALG_SHA_256
- CALG_SHA_384
- CALG_SHA_512
- CALG_SKIPJACK
- CALG_SSL2_MASTER
- CALG_SSL3_MASTER
- CALG_SSL3_SHAMD5
- CALG_TEK
- CALG_TLS1_MASTER
- CALG_TLS1PRF
obj.config("SSLEnabledCipherSuites=*");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_ECDH_RSA_WITH_AES_128_CBC_SHA");
Possible values when SSLProvider is set to Internal include the following:
- TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
- TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
- TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
- TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
- TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
- TLS_RSA_WITH_AES_256_GCM_SHA384
- TLS_RSA_WITH_AES_128_GCM_SHA256
- TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
- TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
- TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
- TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
- TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
- TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
- TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
- TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
- TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
- TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
- TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
- TLS_RSA_WITH_AES_256_CBC_SHA256
- TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
- TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
- TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
- TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
- TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
- TLS_RSA_WITH_AES_128_CBC_SHA256
- TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
- TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
- TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
- TLS_RSA_WITH_AES_256_CBC_SHA
- TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
- TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
- TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
- TLS_DHE_RSA_WITH_AES_256_CBC_SHA
- TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
- TLS_DHE_DSS_WITH_AES_256_CBC_SHA
- TLS_RSA_WITH_AES_128_CBC_SHA
- TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
- TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
- TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
- TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
- TLS_DHE_RSA_WITH_AES_128_CBC_SHA
- TLS_DHE_DSS_WITH_AES_128_CBC_SHA
- TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
- TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
- TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
- TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
- TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
- TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
- TLS_RSA_WITH_3DES_EDE_CBC_SHA
- TLS_RSA_WITH_DES_CBC_SHA
- TLS_DHE_RSA_WITH_DES_CBC_SHA
- TLS_DHE_DSS_WITH_DES_CBC_SHA
- TLS_RSA_WITH_RC4_128_MD5
- TLS_RSA_WITH_RC4_128_SHA
When TLS 1.3 is negotiated (see SSLEnabledProtocols), only the following cipher suites are supported:
- TLS_AES_256_GCM_SHA384
- TLS_CHACHA20_POLY1305_SHA256
- TLS_AES_128_GCM_SHA256
SSLEnabledCipherSuites is used together with SSLCipherStrength.
Not all supported protocols are enabled by default. The default value is 4032 for client components, and 3072 for server components. To specify a combination of enabled protocol versions set this config to the binary OR of one or more of the following values:
TLS1.3 | 12288 (Hex 3000) |
TLS1.2 | 3072 (Hex C00) (Default - Client and Server) |
TLS1.1 | 768 (Hex 300) (Default - Client) |
TLS1 | 192 (Hex C0) (Default - Client) |
SSL3 | 48 (Hex 30) |
SSL2 | 12 (Hex 0C) |
Note that only TLS 1.2 is enabled for server components that accept incoming connections. This adheres to industry standards to ensure a secure connection. Client components enable TLS 1.0, TLS 1.1, and TLS 1.2 by default and will negotiate the highest mutually supported version when connecting to a server, which should be TLS 1.2 in most cases.
SSLEnabledProtocols: Transport Layer Security (TLS) 1.3 Notes:
By default when TLS 1.3 is enabled, the class will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions.
In editions that are designed to run on Windows, SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is supported only on Windows 11/Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.
If set to 1 (Platform provider), please be aware of the following notes:
- The platform provider is available only on Windows 11/Windows Server 2022 and up.
- SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
- If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2, these restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.
SSLEnabledProtocols: SSL2 and SSL3 Notes:
SSL 2.0 and 3.0 are not supported by the class when the SSLProvider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and SSLProvider needs to be set to platform.
This configuration setting is applicable only when SSLProvider is set to Internal.
If set to True, all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.
When set, the class will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools, such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffic for debugging purposes. When writing to this file, the class will only append, it will not overwrite previous values.
Note: This configuration setting is applicable only when SSLProvider is set to Internal.
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedCipher[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedCipherStrength[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedCipherSuite[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedKeyExchange[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedKeyExchangeStrength[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedVersion[connId]");
0x00000001 | Ignore time validity status of certificate. |
0x00000002 | Ignore time validity status of CTL. |
0x00000004 | Ignore non-nested certificate times. |
0x00000010 | Allow unknown certificate authority. |
0x00000020 | Ignore wrong certificate usage. |
0x00000100 | Ignore unknown certificate revocation status. |
0x00000200 | Ignore unknown CTL signer revocation status. |
0x00000400 | Ignore unknown certificate authority revocation status. |
0x00000800 | Ignore unknown root revocation status. |
0x00008000 | Allow test root certificate. |
0x00004000 | Trust test root certificate. |
0x80000000 | Ignore non-matching CN (certificate CN non-matching server name). |
This functionality is currently not available when the provider is OpenSSL.
The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:
-----BEGIN CERTIFICATE----- MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw ... Intermediate Cert... eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w F0I1XhM+pKj7FjDr+XNj -----END CERTIFICATE----- \r \n -----BEGIN CERTIFICATE----- MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp ... Root Cert... d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA -----END CERTIFICATE-----
When specified the class will verify that the server certificate signature algorithm is among the values specified in this configuration setting. If the server certificate signature algorithm is unsupported, the class fails with an error.
The format of this value is a comma-separated list of hash-signature combinations. For instance:
component.SSLProvider = TCPClientSSLProviders.sslpInternal;
component.Config("SSLEnabledProtocols=3072"); //TLS 1.2
component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa");
The default value for this configuration setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.
To not restrict the server's certificate signature algorithm, specify an empty string as the value for this configuration setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.
The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.
When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:
- "ecdhe_secp256r1" (default)
- "ecdhe_secp384r1" (default)
- "ecdhe_secp521r1" (default)
The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result, only some groups are included by default in this configuration setting.
Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used that is not present in this list, it will incur an additional roundtrip and time to generate the key share for that group.
In most cases, this configuration setting does not need to be modified. This should be modified only if there is a specific reason to do so.
The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072
The values are ordered from most preferred to least preferred. The following values are supported:
- "ecdhe_x25519" (default)
- "ecdhe_x448"
- "ecdhe_secp256r1" (default)
- "ecdhe_secp384r1" (default)
- "ecdhe_secp521r1"
- "ffdhe_2048" (default)
- "ffdhe_3072" (default)
- "ffdhe_4096"
- "ffdhe_6144"
- "ffdhe_8192"
- "ed25519" (default)
- "ed448" (default)
- "ecdsa_secp256r1_sha256" (default)
- "ecdsa_secp384r1_sha384" (default)
- "ecdsa_secp521r1_sha512" (default)
- "rsa_pkcs1_sha256" (default)
- "rsa_pkcs1_sha384" (default)
- "rsa_pkcs1_sha512" (default)
- "rsa_pss_sha256" (default)
- "rsa_pss_sha384" (default)
- "rsa_pss_sha512" (default)
The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192
The values are ordered from most preferred to least preferred. The following values are supported:
- "ecdhe_x25519" (default)
- "ecdhe_x448" (default)
- "ecdhe_secp256r1" (default)
- "ecdhe_secp384r1" (default)
- "ecdhe_secp521r1" (default)
- "ffdhe_2048" (default)
- "ffdhe_3072" (default)
- "ffdhe_4096" (default)
- "ffdhe_6144" (default)
- "ffdhe_8192" (default)
Socket Config Settings
Note: This option is not valid for User Datagram Protocol (UDP) ports.
Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.
Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.
Base Config Settings
The following is a list of valid code page identifiers:
Identifier | Name |
037 | IBM EBCDIC - U.S./Canada |
437 | OEM - United States |
500 | IBM EBCDIC - International |
708 | Arabic - ASMO 708 |
709 | Arabic - ASMO 449+, BCON V4 |
710 | Arabic - Transparent Arabic |
720 | Arabic - Transparent ASMO |
737 | OEM - Greek (formerly 437G) |
775 | OEM - Baltic |
850 | OEM - Multilingual Latin I |
852 | OEM - Latin II |
855 | OEM - Cyrillic (primarily Russian) |
857 | OEM - Turkish |
858 | OEM - Multilingual Latin I + Euro symbol |
860 | OEM - Portuguese |
861 | OEM - Icelandic |
862 | OEM - Hebrew |
863 | OEM - Canadian-French |
864 | OEM - Arabic |
865 | OEM - Nordic |
866 | OEM - Russian |
869 | OEM - Modern Greek |
870 | IBM EBCDIC - Multilingual/ROECE (Latin-2) |
874 | ANSI/OEM - Thai (same as 28605, ISO 8859-15) |
875 | IBM EBCDIC - Modern Greek |
932 | ANSI/OEM - Japanese, Shift-JIS |
936 | ANSI/OEM - Simplified Chinese (PRC, Singapore) |
949 | ANSI/OEM - Korean (Unified Hangul Code) |
950 | ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC) |
1026 | IBM EBCDIC - Turkish (Latin-5) |
1047 | IBM EBCDIC - Latin 1/Open System |
1140 | IBM EBCDIC - U.S./Canada (037 + Euro symbol) |
1141 | IBM EBCDIC - Germany (20273 + Euro symbol) |
1142 | IBM EBCDIC - Denmark/Norway (20277 + Euro symbol) |
1143 | IBM EBCDIC - Finland/Sweden (20278 + Euro symbol) |
1144 | IBM EBCDIC - Italy (20280 + Euro symbol) |
1145 | IBM EBCDIC - Latin America/Spain (20284 + Euro symbol) |
1146 | IBM EBCDIC - United Kingdom (20285 + Euro symbol) |
1147 | IBM EBCDIC - France (20297 + Euro symbol) |
1148 | IBM EBCDIC - International (500 + Euro symbol) |
1149 | IBM EBCDIC - Icelandic (20871 + Euro symbol) |
1200 | Unicode UCS-2 Little-Endian (BMP of ISO 10646) |
1201 | Unicode UCS-2 Big-Endian |
1250 | ANSI - Central European |
1251 | ANSI - Cyrillic |
1252 | ANSI - Latin I |
1253 | ANSI - Greek |
1254 | ANSI - Turkish |
1255 | ANSI - Hebrew |
1256 | ANSI - Arabic |
1257 | ANSI - Baltic |
1258 | ANSI/OEM - Vietnamese |
1361 | Korean (Johab) |
10000 | MAC - Roman |
10001 | MAC - Japanese |
10002 | MAC - Traditional Chinese (Big5) |
10003 | MAC - Korean |
10004 | MAC - Arabic |
10005 | MAC - Hebrew |
10006 | MAC - Greek I |
10007 | MAC - Cyrillic |
10008 | MAC - Simplified Chinese (GB 2312) |
10010 | MAC - Romania |
10017 | MAC - Ukraine |
10021 | MAC - Thai |
10029 | MAC - Latin II |
10079 | MAC - Icelandic |
10081 | MAC - Turkish |
10082 | MAC - Croatia |
12000 | Unicode UCS-4 Little-Endian |
12001 | Unicode UCS-4 Big-Endian |
20000 | CNS - Taiwan |
20001 | TCA - Taiwan |
20002 | Eten - Taiwan |
20003 | IBM5550 - Taiwan |
20004 | TeleText - Taiwan |
20005 | Wang - Taiwan |
20105 | IA5 IRV International Alphabet No. 5 (7-bit) |
20106 | IA5 German (7-bit) |
20107 | IA5 Swedish (7-bit) |
20108 | IA5 Norwegian (7-bit) |
20127 | US-ASCII (7-bit) |
20261 | T.61 |
20269 | ISO 6937 Non-Spacing Accent |
20273 | IBM EBCDIC - Germany |
20277 | IBM EBCDIC - Denmark/Norway |
20278 | IBM EBCDIC - Finland/Sweden |
20280 | IBM EBCDIC - Italy |
20284 | IBM EBCDIC - Latin America/Spain |
20285 | IBM EBCDIC - United Kingdom |
20290 | IBM EBCDIC - Japanese Katakana Extended |
20297 | IBM EBCDIC - France |
20420 | IBM EBCDIC - Arabic |
20423 | IBM EBCDIC - Greek |
20424 | IBM EBCDIC - Hebrew |
20833 | IBM EBCDIC - Korean Extended |
20838 | IBM EBCDIC - Thai |
20866 | Russian - KOI8-R |
20871 | IBM EBCDIC - Icelandic |
20880 | IBM EBCDIC - Cyrillic (Russian) |
20905 | IBM EBCDIC - Turkish |
20924 | IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol) |
20932 | JIS X 0208-1990 & 0121-1990 |
20936 | Simplified Chinese (GB2312) |
21025 | IBM EBCDIC - Cyrillic (Serbian, Bulgarian) |
21027 | Extended Alpha Lowercase |
21866 | Ukrainian (KOI8-U) |
28591 | ISO 8859-1 Latin I |
28592 | ISO 8859-2 Central Europe |
28593 | ISO 8859-3 Latin 3 |
28594 | ISO 8859-4 Baltic |
28595 | ISO 8859-5 Cyrillic |
28596 | ISO 8859-6 Arabic |
28597 | ISO 8859-7 Greek |
28598 | ISO 8859-8 Hebrew |
28599 | ISO 8859-9 Latin 5 |
28605 | ISO 8859-15 Latin 9 |
29001 | Europa 3 |
38598 | ISO 8859-8 Hebrew |
50220 | ISO 2022 Japanese with no halfwidth Katakana |
50221 | ISO 2022 Japanese with halfwidth Katakana |
50222 | ISO 2022 Japanese JIS X 0201-1989 |
50225 | ISO 2022 Korean |
50227 | ISO 2022 Simplified Chinese |
50229 | ISO 2022 Traditional Chinese |
50930 | Japanese (Katakana) Extended |
50931 | US/Canada and Japanese |
50933 | Korean Extended and Korean |
50935 | Simplified Chinese Extended and Simplified Chinese |
50936 | Simplified Chinese |
50937 | US/Canada and Traditional Chinese |
50939 | Japanese (Latin) Extended and Japanese |
51932 | EUC - Japanese |
51936 | EUC - Simplified Chinese |
51949 | EUC - Korean |
51950 | EUC - Traditional Chinese |
52936 | HZ-GB2312 Simplified Chinese |
54936 | Windows XP: GB18030 Simplified Chinese (4 Byte) |
57002 | ISCII Devanagari |
57003 | ISCII Bengali |
57004 | ISCII Tamil |
57005 | ISCII Telugu |
57006 | ISCII Assamese |
57007 | ISCII Oriya |
57008 | ISCII Kannada |
57009 | ISCII Malayalam |
57010 | ISCII Gujarati |
57011 | ISCII Punjabi |
65000 | Unicode UTF-7 |
65001 | Unicode UTF-8 |
Identifier | Name |
1 | ASCII |
2 | NEXTSTEP |
3 | JapaneseEUC |
4 | UTF8 |
5 | ISOLatin1 |
6 | Symbol |
7 | NonLossyASCII |
8 | ShiftJIS |
9 | ISOLatin2 |
10 | Unicode |
11 | WindowsCP1251 |
12 | WindowsCP1252 |
13 | WindowsCP1253 |
14 | WindowsCP1254 |
15 | WindowsCP1250 |
21 | ISO2022JP |
30 | MacOSRoman |
10 | UTF16String |
0x90000100 | UTF16BigEndian |
0x94000100 | UTF16LittleEndian |
0x8c000100 | UTF32String |
0x98000100 | UTF32BigEndian |
0x9c000100 | UTF32LittleEndian |
65536 | Proprietary |
- Product: The product the license is for.
- Product Key: The key the license was generated from.
- License Source: Where the license was found (e.g., RuntimeLicense, License File).
- License Type: The type of license installed (e.g., Royalty Free, Single Server).
- Last Valid Build: The last valid build number for which the license will work.
This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.
Setting this configuration setting to true tells the class to use the internal implementation instead of using the system security libraries.
On Windows, this setting is set to false by default. On Linux/macOS, this setting is set to true by default.
To use the system security libraries for Linux, OpenSSL support must be enabled. For more information on how to enable OpenSSL, please refer to the OpenSSL Notes section.
Trappable Errors (SMPP Class)
SMPP Errors
620 | SMPP protocol error |
621 | You cannot change this property while connected |
622 | Server disconnected before responding |
623 | Field value out of range |
624 | Unsupported SMPP version |
625 | Message parameter too long |
The class may also return one of the following error codes, which are inherited from other classes.
TCPClient Errors
100 | You cannot change the RemotePort at this time. A connection is in progress. |
101 | You cannot change the RemoteHost (Server) at this time. A connection is in progress. |
102 | The RemoteHost address is invalid (0.0.0.0). |
104 | Already connected. If you want to reconnect, close the current connection first. |
106 | You cannot change the LocalPort at this time. A connection is in progress. |
107 | You cannot change the LocalHost at this time. A connection is in progress. |
112 | You cannot change MaxLineLength at this time. A connection is in progress. |
116 | RemotePort cannot be zero. Please specify a valid service port number. |
117 | You cannot change the UseConnection option while the class is active. |
135 | Operation would block. |
201 | Timeout. |
211 | Action impossible in control's present state. |
212 | Action impossible while not connected. |
213 | Action impossible while listening. |
301 | Timeout. |
302 | Could not open file. |
434 | Unable to convert string to selected CodePage. |
1105 | Already connecting. If you want to reconnect, close the current connection first. |
1117 | You need to connect first. |
1119 | You cannot change the LocalHost at this time. A connection is in progress. |
1120 | Connection dropped by remote host. |
SSL Errors
270 | Cannot load specified security library. |
271 | Cannot open certificate store. |
272 | Cannot find specified certificate. |
273 | Cannot acquire security credentials. |
274 | Cannot find certificate chain. |
275 | Cannot verify certificate chain. |
276 | Error during handshake. |
280 | Error verifying certificate. |
281 | Could not find client certificate. |
282 | Could not find server certificate. |
283 | Error encrypting data. |
284 | Error decrypting data. |
TCP/IP Errors
10004 | [10004] Interrupted system call. |
10009 | [10009] Bad file number. |
10013 | [10013] Access denied. |
10014 | [10014] Bad address. |
10022 | [10022] Invalid argument. |
10024 | [10024] Too many open files. |
10035 | [10035] Operation would block. |
10036 | [10036] Operation now in progress. |
10037 | [10037] Operation already in progress. |
10038 | [10038] Socket operation on nonsocket. |
10039 | [10039] Destination address required. |
10040 | [10040] Message is too long. |
10041 | [10041] Protocol wrong type for socket. |
10042 | [10042] Bad protocol option. |
10043 | [10043] Protocol is not supported. |
10044 | [10044] Socket type is not supported. |
10045 | [10045] Operation is not supported on socket. |
10046 | [10046] Protocol family is not supported. |
10047 | [10047] Address family is not supported by protocol family. |
10048 | [10048] Address already in use. |
10049 | [10049] Cannot assign requested address. |
10050 | [10050] Network is down. |
10051 | [10051] Network is unreachable. |
10052 | [10052] Net dropped connection or reset. |
10053 | [10053] Software caused connection abort. |
10054 | [10054] Connection reset by peer. |
10055 | [10055] No buffer space available. |
10056 | [10056] Socket is already connected. |
10057 | [10057] Socket is not connected. |
10058 | [10058] Cannot send after socket shutdown. |
10059 | [10059] Too many references, cannot splice. |
10060 | [10060] Connection timed out. |
10061 | [10061] Connection refused. |
10062 | [10062] Too many levels of symbolic links. |
10063 | [10063] File name is too long. |
10064 | [10064] Host is down. |
10065 | [10065] No route to host. |
10066 | [10066] Directory is not empty |
10067 | [10067] Too many processes. |
10068 | [10068] Too many users. |
10069 | [10069] Disc Quota Exceeded. |
10070 | [10070] Stale NFS file handle. |
10071 | [10071] Too many levels of remote in path. |
10091 | [10091] Network subsystem is unavailable. |
10092 | [10092] WINSOCK DLL Version out of range. |
10093 | [10093] Winsock is not loaded yet. |
11001 | [11001] Host not found. |
11002 | [11002] Nonauthoritative 'Host not found' (try again or check DNS setup). |
11003 | [11003] Nonrecoverable errors: FORMERR, REFUSED, NOTIMP. |
11004 | [11004] Valid name, no data record (check DNS setup). |