LDAP Module

Properties   Methods   Events   Config Settings   Errors  

The Lightweight Directory Access Protocol (LDAP) Module is used to search, manage, and maintain internet directory servers.

Syntax

IPWorksSSL.Ldap

Remarks

The LDAP Class supports both plaintext and Secure Sockets Layer/Transport Layer Security (SSL/TLS) connections. When connecting over SSL/TLS the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL related settings are also supported via the Config method.

The LDAP Class implements a standard LDAP client as specified in RFC 1777, 2251, and other LDAP RFCs. Support for both LDAP v2 and v3 is provided.

The first step in using the class is specifying the ServerName, a DN (distinguished name) to bind as, and optionally a Password. Then you can call one or more of the class methods to act upon the server. Server responses normally are received through the Result event. The only exceptions are search requests that result in one or more SearchResult events, followed by a final SearchComplete event.

Attributes are set and returned through the Attributes properties. Other command arguments are specified through other properties. These are specified in detail in each method.

Search filters are to be specified as string arguments to the Search method. The format must be a standard LDAP search string as specified in RFC 1558. Other search attributes are set in properties, such as SearchScope, SearchTimeLimit, SearchSizeLimit, SearchReturnValues, and SearchDerefAliases.

The class operates synchronously by default (waits for a response before returning control to the caller); however, the class also may operate asynchronously (return control immediately), by setting Timeout to 0. Please refer to the Timeout property for more information.

Property List

The following is the full list of the properties of the module with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the module with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the module with short descriptions. Click on the links for further details.

AcceptData Property (LDAP Module)

This property enables or disables data reception from the server.

Syntax

• Swift
• Objective-C

public var acceptData: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=acceptData,setter=setAcceptData:) BOOL acceptData;

- (BOOL)acceptData;
- (void)setAcceptData :(BOOL)newAcceptData;

Default Value

True

Remarks

This property enables or disables data reception from the server. Setting the property to False, temporarily disables data reception. Setting the property to True, reenables data reception.

Note: It is recommended to use the PauseData or ProcessData method instead of setting this property.

Attributes Property (LDAP Module)

This property includes the attributes for the current entry.

Syntax

• Swift
• Objective-C

public var attributes: Array<LDAPAttribute> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=attrCount,setter=setAttrCount:) int attrCount;

- (int)attrCount;
- (void)setAttrCount :(int)newAttrCount;

- (NSString*)attrType:(int)attrIndex;
- (void)setAttrType:(int)attrIndex :(NSString*)newAttrType;

- (int)attrModOp:(int)attrIndex;
- (void)setAttrModOp:(int)attrIndex :(int)newAttrModOp;

- (NSString*)attrValue:(int)attrIndex;
- (void)setAttrValue:(int)attrIndex :(NSString*)newAttrValue;

- (NSData*)attrValueB:(int)attrIndex;
- (void)setAttrValueB:(int)attrIndex :(NSData*)newAttrValue;

Default Value

60

Remarks

This property contains a collection of all of the attributes for the current entry. Each attribute's details are found in the fields of the LDAPAttribute type.

After a Search, this property will be populated with the attributes of each search result and can be read within the SearchResult event (one event for each resulting DN).

During a Lightweight Directory Access Protocol (LDAP) Modify operation, this property describes the modifications that are to be made to the attributes. You may specify the attribute, the new value, and the operation to be executed by the server in this property.

AuthMechanism Property (LDAP Module)

This property is the authentication mechanism to be used when connecting to the Lightweight Directory Access Protocol (LDAP) server.

Syntax

• Swift
• Objective-C

public var authMechanism: LdapAuthMechanisms {
  get {...}
  set {...}
}

public enum LdapAuthMechanisms: Int32 {
  case lamSimple = 0
  case lamDigestMD5 = 1
  case lamNegotiate = 2
  case lamKerberos = 6
  case lamSASLExternal = 7
}

@property (nonatomic,readwrite,assign,getter=authMechanism,setter=setAuthMechanism:) int authMechanism;

- (int)authMechanism;
- (void)setAuthMechanism :(int)newAuthMechanism;

Default Value

0

Remarks

This property specifies the authentication mechanism used. Possible values are as follows:

Connected Property (LDAP Module)

This shows whether the module is connected.

Syntax

• Swift
• Objective-C

public var connected: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=connected,setter=setConnected:) BOOL connected;

- (BOOL)connected;
- (void)setConnected :(BOOL)newConnected;

Default Value

False

Remarks

This property is used to determine whether or not the class is connected to the remote host.

Note: It is recommended to use the Connect or Disconnect method instead of setting this property.

DeleteOldRDN Property (LDAP Module)

This property controls whether the old RDN (Relative Distinguished Name) should be deleted.

Syntax

• Swift
• Objective-C

public var deleteOldRDN: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=deleteOldRDN,setter=setDeleteOldRDN:) BOOL deleteOldRDN;

- (BOOL)deleteOldRDN;
- (void)setDeleteOldRDN :(BOOL)newDeleteOldRDN;

Default Value

True

Remarks

This property controls whether the old RDN should be deleted. It is used when ModifyRDN is called. The default value is True, which instructs the server to delete the old RDN.

DN Property (LDAP Module)

This property includes the distinguished name used as the base for Lightweight Directory Access Protocol (LDAP) operations.

Syntax

• Swift
• Objective-C

public var dn: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=DN,setter=setDN:) NSString* DN;

- (NSString*)DN;
- (void)setDN :(NSString*)newDN;

Default Value

""

Remarks

This also includes the base object during LDAP searches.

The distinguished name is provided in string format, as specified by RFC 1779. Example. Setting DN:

LDAPControl.DN = "uid=TThompson,ou=Employees,dc=server" LDAPControl.DN = "Domain\Username"

Firewall Property (LDAP Module)

A set of properties related to firewall access.

Syntax

• Swift
• Objective-C

public var firewall: Firewall {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=firewallAutoDetect,setter=setFirewallAutoDetect:) BOOL firewallAutoDetect;

- (BOOL)firewallAutoDetect;
- (void)setFirewallAutoDetect :(BOOL)newFirewallAutoDetect;

@property (nonatomic,readwrite,assign,getter=firewallType,setter=setFirewallType:) int firewallType;

- (int)firewallType;
- (void)setFirewallType :(int)newFirewallType;

@property (nonatomic,readwrite,assign,getter=firewallHost,setter=setFirewallHost:) NSString* firewallHost;

- (NSString*)firewallHost;
- (void)setFirewallHost :(NSString*)newFirewallHost;

@property (nonatomic,readwrite,assign,getter=firewallPassword,setter=setFirewallPassword:) NSString* firewallPassword;

- (NSString*)firewallPassword;
- (void)setFirewallPassword :(NSString*)newFirewallPassword;

@property (nonatomic,readwrite,assign,getter=firewallPort,setter=setFirewallPort:) int firewallPort;

- (int)firewallPort;
- (void)setFirewallPort :(int)newFirewallPort;

@property (nonatomic,readwrite,assign,getter=firewallUser,setter=setFirewallUser:) NSString* firewallUser;

- (NSString*)firewallUser;
- (void)setFirewallUser :(NSString*)newFirewallUser;

 

Default Value

60

Remarks

This is a Firewall-type property, which contains fields describing the firewall through which the class will attempt to connect.

Idle Property (LDAP Module)

The current status of the module.

Syntax

• Swift
• Objective-C

public var idle: Bool {
  get {...}
}

@property (nonatomic,readonly,assign,getter=idle) BOOL idle;

- (BOOL)idle;

Default Value

True

Remarks

Idle will be False if the component is currently busy (communicating and/or waiting for an answer), and True at all other times.

This property is read-only.

LDAPVersion Property (LDAP Module)

The version of the Lightweight Directory Access Protocol (LDAP) used.

Syntax

• Swift
• Objective-C

public var ldapVersion: Int32 {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=LDAPVersion,setter=setLDAPVersion:) int LDAPVersion;

- (int)LDAPVersion;
- (void)setLDAPVersion :(int)newLDAPVersion;

Default Value

3

Remarks

This property contains the version of LDAP used. The default value is 3 (for LDAPv3).

LocalHost Property (LDAP Module)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

• Swift
• Objective-C

public var localHost: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=localHost,setter=setLocalHost:) NSString* localHost;

- (NSString*)localHost;
- (void)setLocalHost :(NSString*)newLocalHost;

Default Value

""

Remarks

The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

MessageId Property (LDAP Module)

This property includes the message identifier for the next Lightweight Directory Access Protocol (LDAP) request.

Syntax

• Swift
• Objective-C

public var messageId: Int32 {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=messageId,setter=setMessageId:) int messageId;

- (int)messageId;
- (void)setMessageId :(int)newMessageId;

Default Value

1

Remarks

This property contains the message identifier for the next LDAP request. If a custom value is needed, this property must be set before calling any other methods. The class increments this property automatically after each request.

PageSize Property (LDAP Module)

This property includes the maximum number of results per page for the Search method.

Syntax

• Swift
• Objective-C

public var pageSize: Int32 {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=pageSize,setter=setPageSize:) int pageSize;

- (int)pageSize;
- (void)setPageSize :(int)newPageSize;

Default Value

0

Remarks

This property contains the maximum number of results per page for the Search method. The default value is 0 (no paging). If set to a value greater than zero, results will be paged, that is, returned in blocks of maximum PageSize results.

For each page sent by the server, a SearchPage event will fire. You may decide to cancel or continue displaying results from within this event.

Note: Lightweight Directory Access Protocol (LDAP) paging functionality is described by LDAP extension RFCs and may or may not be implemented by the LDAP server being accessed.

Password Property (LDAP Module)

This property includes the password used to authenticate to the Lightweight Directory Access Protocol (LDAP) server.

Syntax

• Swift
• Objective-C

public var password: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=password,setter=setPassword:) NSString* password;

- (NSString*)password;
- (void)setPassword :(NSString*)newPassword;

Default Value

""

Remarks

This property contains the password used to authenticate to the LDAP server. Leave this value empty if no password is required.

References Property (LDAP Module)

This property includes a collection of references returned from the server.

Syntax

• Swift
• Objective-C

public var references: Array<LDAPReference> {
  get {...}
}

@property (nonatomic,readonly,assign,getter=referenceCount) int referenceCount;

- (int)referenceCount;

- (NSString*)referenceURL:(int)referenceIndex;

Default Value

60

Remarks

This property contains a collection of references returned from the server. References will be SearchResult references if inside a SearchResult or SearchResultReference event. In this case, they represent URLs to contact to continue the search. References will be regular result references if inside the Result event or SearchComplete event. In this case, they represent the URLs to contact to complete the requested operation.

ResultCode Property (LDAP Module)

This property includes the result code returned in the last server response.

Syntax

• Swift
• Objective-C

public var resultCode: Int32 {
  get {...}
}

@property (nonatomic,readonly,assign,getter=resultCode) int resultCode;

- (int)resultCode;

Default Value

0

Remarks

This property contains the result code returned in the last server response. This is identical to the corresponding parameter provided by the last Result, SearchResult, or SearchComplete event.

Possible result codes are as follows:

All the result codes with the exception of success, compareFalse and compareTrue are to be treated as meaning the operation could not be completed in its entirety. Result codes from 16 to 21 indicate an AttributeProblem; codes 32, 33, 34, and 36 indicate a NameProblem; codes 48, 49, and 50 indicate a SecurityProblem; codes 51 to 54 indicate a ServiceProblem; and codes 64 to 69 and 71 indicate an UpdateProblem.

This property is read-only.

ResultDescription Property (LDAP Module)

This property includes the descriptive text returned in the last server response (if any).

Syntax

• Swift
• Objective-C

public var resultDescription: String {
  get {...}
}

@property (nonatomic,readonly,assign,getter=resultDescription) NSString* resultDescription;

- (NSString*)resultDescription;

Default Value

""

Remarks

This property contains the descriptive text returned in the last server response (if any). This is identical to the corresponding parameter provided by the last Result, SearchResult, or SearchComplete event.

This property is read-only.

ResultDN Property (LDAP Module)

This property includes the distinguished name returned in the last server response (if any).

Syntax

• Swift
• Objective-C

public var resultDN: String {
  get {...}
}

@property (nonatomic,readonly,assign,getter=resultDN) NSString* resultDN;

- (NSString*)resultDN;

Default Value

""

Remarks

This property contains the distinguished name returned in the last server response (if any). This is identical to the corresponding parameter provided by the last Result or SearchComplete event.

This property is read-only.

SearchDerefAliases Property (LDAP Module)

This property controls alias dereferencing during searching.

Syntax

• Swift
• Objective-C

public var searchDerefAliases: LdapSearchDerefAliases {
  get {...}
  set {...}
}

public enum LdapSearchDerefAliases: Int32 {
  case sdaNever = 0
  case sdaInSearching = 1
  case sdaFindingBaseObject = 2
  case sdaAlways = 3
}

@property (nonatomic,readwrite,assign,getter=searchDerefAliases,setter=setSearchDerefAliases:) int searchDerefAliases;

- (int)searchDerefAliases;
- (void)setSearchDerefAliases :(int)newSearchDerefAliases;

Default Value

0

Remarks

This property controls the alias dereferencing during searching. The possible values are as follows:

The default is to never dereference aliases.

SearchReturnValues Property (LDAP Module)

This property controls whether the search operation returns values of attributes or only types.

Syntax

• Swift
• Objective-C

public var searchReturnValues: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=searchReturnValues,setter=setSearchReturnValues:) BOOL searchReturnValues;

- (BOOL)searchReturnValues;
- (void)setSearchReturnValues :(BOOL)newSearchReturnValues;

Default Value

True

Remarks

This property controls whether the search operation returns values of attributes or only types. If only attributes are needed, disabling the property to return values will enhance performance.

SearchScope Property (LDAP Module)

This property controls the scope of Lightweight Directory Access Protocol (LDAP) search operations.

Syntax

• Swift
• Objective-C

public var searchScope: LdapSearchScopes {
  get {...}
  set {...}
}

public enum LdapSearchScopes: Int32 {
  case ssBaseObject = 0
  case ssSingleLevel = 1
  case ssWholeSubtree = 2
}

@property (nonatomic,readwrite,assign,getter=searchScope,setter=setSearchScope:) int searchScope;

- (int)searchScope;
- (void)setSearchScope :(int)newSearchScope;

Default Value

2

Remarks

This property controls the scope of LDAP search operations. Possible values are as follows:

The default is to search the whole subtree.

SearchSizeLimit Property (LDAP Module)

This property includes the maximum number of entries that can be returned by the next search operation.

Syntax

• Swift
• Objective-C

public var searchSizeLimit: Int32 {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=searchSizeLimit,setter=setSearchSizeLimit:) int searchSizeLimit;

- (int)searchSizeLimit;
- (void)setSearchSizeLimit :(int)newSearchSizeLimit;

Default Value

0

Remarks

This property contains the maximum number of entries that can be returned by the next search operation. This limit is provided as a hint to the directory server. A value of 0 means that no size limits are in effect for the search.

SearchTimeLimit Property (LDAP Module)

This property includes a time limit for the next search operation (in seconds).

Syntax

• Swift
• Objective-C

public var searchTimeLimit: Int32 {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=searchTimeLimit,setter=setSearchTimeLimit:) int searchTimeLimit;

- (int)searchTimeLimit;
- (void)setSearchTimeLimit :(int)newSearchTimeLimit;

Default Value

0

Remarks

This property contains a time limit for the next search operation (in seconds). This limit is provided as a hint to the directory server. A value of 0 means that no time limits are in effect for the search.

ServerName Property (LDAP Module)

This property includes the name or address of the Lightweight Directory Access Protocol (LDAP) server.

Syntax

• Swift
• Objective-C

public var serverName: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=serverName,setter=setServerName:) NSString* serverName;

- (NSString*)serverName;
- (void)setServerName :(NSString*)newServerName;

Default Value

""

Remarks

This property specifies the IP address (IP number in dotted internet format) or the domain name of the directory server. It is set before a connection is attempted and cannot be changed once a connection is in progress.

If this property is set to a domain name, a DNS request is initiated, and upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, an error is returned.

ServerPort Property (LDAP Module)

This property includes the server port for the Lightweight Directory Access Protocol (LDAP) connection (the default is 389).

Syntax

• Swift
• Objective-C

public var serverPort: Int32 {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=serverPort,setter=setServerPort:) int serverPort;

- (int)serverPort;
- (void)setServerPort :(int)newServerPort;

Default Value

389

Remarks

This property contains the server port for the LDAP connection (the default is 389).

For the implicit Secure Sockets Layer (SSL), use port 636 (please refer to the SSLStartMode property for more information).

A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

SortAttributes Property (LDAP Module)

This property includes a string of attribute names to sort on with optional relative matching rules.

Syntax

• Swift
• Objective-C

public var sortAttributes: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=sortAttributes,setter=setSortAttributes:) NSString* sortAttributes;

- (NSString*)sortAttributes;
- (void)setSortAttributes :(NSString*)newSortAttributes;

Default Value

""

Remarks

This property contains a string of attribute names to sort on with optional relative matching rules. When set before a Search, entries returned by the server will be sorted according to SortAttributes. The format consists of one or more attribute names separated by spaces. Each attribute may be followed by an optional matching rule.

If matching rules are defined, they should be separated from the attribute names with a "/".

Normally, the values are returned in ascending order. If descending (reverse) order of sorting is desired, the attribute type must be preceded with a "-".

Following are examples:

LDAPControl.SortAttributes = "loginTime" LDAPControl.SortAttributes = "name/caseIgnoreSubstringsMatch age/numericStringSubstringsMatch" LDAPControl.SortAttributes = "cn age/1.3.6.1.4.1.1466.115.121.1.27" LDAPControl.SortAttributes = "-cn age/1.3.6.1.4.1.1466.115.121.1.27" Example 1. Matching Rules for Equality Filters:

SSLAcceptServerCertEncoded Property (LDAP Module)

This is the certificate (PEM/base64 encoded).

Syntax

• Swift
• Objective-C

public var sslAcceptServerCertEncoded: String {
  get {...}
  set {...}
}

public var sslAcceptServerCertEncodedB: Data {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=SSLAcceptServerCertEncoded,setter=setSSLAcceptServerCertEncoded:) NSString* SSLAcceptServerCertEncoded;

- (NSString*)SSLAcceptServerCertEncoded;
- (void)setSSLAcceptServerCertEncoded :(NSString*)newSSLAcceptServerCertEncoded;

@property (nonatomic,readwrite,assign,getter=SSLAcceptServerCertEncodedB,setter=setSSLAcceptServerCertEncodedB:) NSData* SSLAcceptServerCertEncodedB;

- (NSData*)SSLAcceptServerCertEncodedB;
- (void)setSSLAcceptServerCertEncodedB :(NSData*)newSSLAcceptServerCertEncoded;

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:

public func setSSLAcceptServerCertEncodedB(sslAcceptServerCertEncoded: Data) throws
public func setSSLAcceptServerCertEncoded(sslAcceptServerCertEncoded: String) throws

SSLCertEncoded Property (LDAP Module)

This is the certificate (PEM/base64 encoded).

Syntax

• Swift
• Objective-C

public var sslCertEncoded: String {
  get {...}
  set {...}
}

public var sslCertEncodedB: Data {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=SSLCertEncoded,setter=setSSLCertEncoded:) NSString* SSLCertEncoded;

- (NSString*)SSLCertEncoded;
- (void)setSSLCertEncoded :(NSString*)newSSLCertEncoded;

@property (nonatomic,readwrite,assign,getter=SSLCertEncodedB,setter=setSSLCertEncodedB:) NSData* SSLCertEncodedB;

- (NSData*)SSLCertEncodedB;
- (void)setSSLCertEncodedB :(NSData*)newSSLCertEncoded;

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:

public func setSSLCertEncodedB(sslCertEncoded: Data) throws
public func setSSLCertEncoded(sslCertEncoded: String) throws

SSLCertStore Property (LDAP Module)

This is the name of the certificate store for the client certificate.

Syntax

• Swift
• Objective-C

public var sslCertStore: String {
  get {...}
  set {...}
}

public var sslCertStoreB: Data {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=SSLCertStore,setter=setSSLCertStore:) NSString* SSLCertStore;

- (NSString*)SSLCertStore;
- (void)setSSLCertStore :(NSString*)newSSLCertStore;

@property (nonatomic,readwrite,assign,getter=SSLCertStoreB,setter=setSSLCertStoreB:) NSData* SSLCertStoreB;

- (NSData*)SSLCertStoreB;
- (void)setSSLCertStoreB :(NSData*)newSSLCertStore;

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

SSLCertStorePassword Property (LDAP Module)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

• Swift
• Objective-C

public var sslCertStorePassword: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=SSLCertStorePassword,setter=setSSLCertStorePassword:) NSString* SSLCertStorePassword;

- (NSString*)SSLCertStorePassword;
- (void)setSSLCertStorePassword :(NSString*)newSSLCertStorePassword;

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

SSLCertStoreType Property (LDAP Module)

This is the type of certificate store for this certificate.

Syntax

• Swift
• Objective-C

public var sslCertStoreType: LdapSSLCertStoreTypes {
  get {...}
  set {...}
}

public enum LdapSSLCertStoreTypes: Int32 {
  case cstUser = 0
  case cstMachine = 1
  case cstPFXFile = 2
  case cstPFXBlob = 3
  case cstJKSFile = 4
  case cstJKSBlob = 5
  case cstPEMKeyFile = 6
  case cstPEMKeyBlob = 7
  case cstPublicKeyFile = 8
  case cstPublicKeyBlob = 9
  case cstSSHPublicKeyBlob = 10
  case cstP7BFile = 11
  case cstP7BBlob = 12
  case cstSSHPublicKeyFile = 13
  case cstPPKFile = 14
  case cstPPKBlob = 15
  case cstXMLFile = 16
  case cstXMLBlob = 17
  case cstJWKFile = 18
  case cstJWKBlob = 19
  case cstSecurityKey = 20
  case cstBCFKSFile = 21
  case cstBCFKSBlob = 22
  case cstPKCS11 = 23
  case cstAuto = 99
}

@property (nonatomic,readwrite,assign,getter=SSLCertStoreType,setter=setSSLCertStoreType:) int SSLCertStoreType;

- (int)SSLCertStoreType;
- (void)setSSLCertStoreType :(int)newSSLCertStoreType;

Default Value

0

Remarks

This is the type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:

SSLCertSubject Property (LDAP Module)

This is the subject of the certificate used for client authentication.

Syntax

• Swift
• Objective-C

public var sslCertSubject: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=SSLCertSubject,setter=setSSLCertSubject:) NSString* SSLCertSubject;

- (NSString*)SSLCertSubject;
- (void)setSSLCertSubject :(NSString*)newSSLCertSubject;

Default Value

""

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:

public func setSSLCertSubject(sslCertSubject: String) throws

SSLProvider Property (LDAP Module)

This specifies the SSL/TLS implementation to use.

Syntax

• Swift
• Objective-C

public var sslProvider: LdapSSLProviders {
  get {...}
  set {...}
}

public enum LdapSSLProviders: Int32 {
  case sslpAutomatic = 0
  case sslpPlatform = 1
  case sslpInternal = 2
}

@property (nonatomic,readwrite,assign,getter=SSLProvider,setter=setSSLProvider:) int SSLProvider;

- (int)SSLProvider;
- (void)setSSLProvider :(int)newSSLProvider;

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected the platform implementation will be used by default in all cases in the macOS edition.

SSLServerCertEncoded Property (LDAP Module)

This is the certificate (PEM/base64 encoded).

Syntax

• Swift
• Objective-C

public var sslServerCertEncoded: String {
  get {...}
}

public var sslServerCertEncodedB: Data {
  get {...}
}

@property (nonatomic,readonly,assign,getter=SSLServerCertEncoded) NSString* SSLServerCertEncoded;

- (NSString*)SSLServerCertEncoded;

@property (nonatomic,readonly,assign,getter=SSLServerCertEncodedB) NSData* SSLServerCertEncodedB;

- (NSData*)SSLServerCertEncodedB;

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

This property is read-only.

If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:

public func setSSLServerCertEncodedB(sslServerCertEncoded: Data) throws
public func setSSLServerCertEncoded(sslServerCertEncoded: String) throws

SSLStartMode Property (LDAP Module)

Determines how the module starts the SSL negotiation.

Syntax

• Swift
• Objective-C

public var sslStartMode: LdapSSLStartModes {
  get {...}
  set {...}
}

public enum LdapSSLStartModes: Int32 {
  case sslAutomatic = 0
  case sslImplicit = 1
  case sslExplicit = 2
}

@property (nonatomic,readwrite,assign,getter=SSLStartMode,setter=setSSLStartMode:) int SSLStartMode;

- (int)SSLStartMode;
- (void)setSSLStartMode :(int)newSSLStartMode;

Default Value

0

Remarks

The SSLStartMode property may have one of the following values:

Timeout Property (LDAP Module)

A timeout for the module.

Syntax

• Swift
• Objective-C

public var timeout: Int32 {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=timeout,setter=setTimeout:) int timeout;

- (int)timeout;
- (void)setTimeout :(int)newTimeout;

Default Value

60

Remarks

If the Timeout property is set to 0, all operations return immediately, potentially failing with a WOULDBLOCK error if data cannot be sent immediately.

If Timeout is set to a positive value, data is sent in a blocking manner and the class will wait for the operation to complete before returning control. The class will handle any potential WOULDBLOCK errors internally and automatically retry the operation for a maximum of Timeout seconds.

The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the class .

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Abandon Method (LDAP Module)

This method asks the server to abandon a request.

Syntax

• Swift
• Objective-C

public func abandon(messageId: Int32) throws -> Void

- (void)abandon:(int)messageId;

Remarks

This method asks the server to abandon the request specified by MessageId. The result of the operation is returned through the Result event.

Add Method (LDAP Module)

This method adds an entry specified by DN to the directory server using the type and value attributes defined in the Attributes properties.

Syntax

• Swift
• Objective-C

public func add() throws -> Void

- (void)add;

Remarks

This method adds the entry specified by DN to the directory. All entries are required to have an objectClass attribute.

To add a new entry, first Bind with credentials that will allow you to perform the new addition. To add attributes instead of entries, use the Modify method instead. When specifying multivalued attributes, specify the attribute type only in the first occurrence of that attribute type in the Attributes properties. Additional instances of the same attribute type should specify an attribute type of an empty string.

The result of the operation is returned through the Result event.

Example. Add a New Entry (including the multivalued objectClass attribute):

LDAPControl.DN = "uid=NewUser,ou=Employees,dc=server" LDAPControl.AttributeCount = 7 LDAPControl.AttributeType(0) = "objectClass" LDAPControl.AttributeValue(0) = "top" LDAPControl.AttributeType(1) = "" LDAPControl.AttributeValue(1) = "person" LDAPControl.AttributeType(2) = "" LDAPControl.AttributeValue(2) = "organizationalPerson" LDAPControl.AttributeType(3) = "" LDAPControl.AttributeValue(3) = "inetOrgPerson" LDAPControl.AttributeType(4) = "sn" LDAPControl.AttributeValue(4) = "UserName" LDAPControl.AttributeType(5) = "cn" LDAPControl.AttributeValue(5) = "New S. UserName" LDAPControl.AttributeType(6) = "uid" LDAPControl.AttributeValue(6) = "NewUser" LDAPControl.Add()

Attr Method (LDAP Module)

This method returns the value of the specified Lightweight Directory Access Protocol (LDAP) attribute.

Syntax

• Swift
• Objective-C

public func attr(attrType: String) throws -> String

- (NSString*)attr:(NSString*)attrType;

Remarks

This method returns the value of the specified LDAP attribute. If the attribute does not exist, an empty string is returned.

Please refer to the Attributes properties for more information.

Bind Method (LDAP Module)

This method connects and binds to the directory server.

Syntax

• Swift
• Objective-C

public func bind() throws -> Void

- (void)bind;

Remarks

This method connects and binds to the directory server. If the Password property has a value, it is used for authentication. If not, the bind is performed anonymously. Binding is often required on some directory servers, like Active Directory. The result of the operation is returned through the Result event.

Example. Binding:

LDAPControl.DN = "uid=TThompson,ou=Employees,dc=server" LDAPControl.Password = "mypassword" LDAPControl.Bind() LDAPControl.DN = "Domain/Username" LDAPControl.Password = "mypassword" LDAPControl.Bind()

ChangePassword Method (LDAP Module)

This method changes the password for the specified user.

Syntax

• Swift
• Objective-C

public func changePassword(user: String, oldPassword: String, newPassword: String) throws -> Void

- (void)changePassword:(NSString*)user :(NSString*)oldPassword :(NSString*)newPassword;

Remarks

This method changes the password for the specified user.

The User parameter is the name of the user for which the password will be changed. OldPassword specifies the current password and NewPassword specifies the new password.

Note: This operation can be performed only over the Secure Sockets Layer (SSL) port. Set ServerPort to the SSL port of the server (typically 636) before calling this method.

Note: If the user is an administrator, the old password is not required.

Compare Method (LDAP Module)

This method compares attributes and values with those of the entry specified by DN .

Syntax

• Swift
• Objective-C

public func compare() throws -> Void

- (void)compare;

Remarks

This method compares attribute types and values specified via the Attributes properties, with the values in the directory for the entry specified by DN. The result of the operation is returned through the Result event.

Config Method (LDAP Module)

Sets or retrieves a configuration setting.

Syntax

• Swift
• Objective-C

public func config(configurationString: String) throws -> String

- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (LDAP Module)

This method connects to the remote host without performing any action.

Syntax

• Swift
• Objective-C

public func connect() throws -> Void

- (void)connect;

Remarks

This method establishes a connection with the remote host specified by URL, but it does not send a request. In most cases, it is recommended to use the appropriate method, such as Get or Post, which will both establish a connection and send a request.

This method may be useful in cases in which it is desirable to establish a connection without performing any operation (e.g., when testing connectivity).

Delete Method (LDAP Module)

Deletes an entry specified by DN from the directory server.

Syntax

• Swift
• Objective-C

public func delete_() throws -> Void

- (void)delete;

Remarks

This method deletes the entry specified by DN from the directory. The result of the operation is returned through the Result event.

DoEvents Method (LDAP Module)

Processes events from the internal message queue.

Syntax

• Swift
• Objective-C

public func doEvents() throws -> Void

- (void)doEvents;

Remarks

When DoEvents is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.

ExtendedRequest Method (LDAP Module)

This method performs a Lightweight Directory Access Protocol (LDAP) V3 extended operation.

Syntax

• Swift
• Objective-C

public func extendedRequest(requestName: String, requestValue: Data) throws -> Void

- (void)extendedRequest:(NSString*)requestName :(NSData*)requestValue;

Remarks

This method performs an LDAP V3 extended operation. RequestName must contain the object identifier of the operation, and RequestValue may contain an optional value.

Interrupt Method (LDAP Module)

Interrupt the current method.

Syntax

• Swift
• Objective-C

public func interrupt() throws -> Void

- (void)interrupt;

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ListComputers Method (LDAP Module)

This method lists all computers in the directory.

Syntax

• Swift
• Objective-C

public func listComputers() throws -> Void

- (void)listComputers;

Remarks

This method lists all computers in the directory. The ComputerList event will be fired once for each computer returned.

ListGroupMembers Method (LDAP Module)

This method lists all members of a group.

Syntax

• Swift
• Objective-C

public func listGroupMembers(group: String) throws -> Void

- (void)listGroupMembers:(NSString*)group;

Remarks

This method lists all members of the specified group. The UserList event will be fired once for each member returned.

ListGroups Method (LDAP Module)

This method list all groups in the directory.

Syntax

• Swift
• Objective-C

public func listGroups() throws -> Void

- (void)listGroups;

Remarks

This method lists all groups in the directory. The GroupList event will be fired once for each group returned.

ListUserGroups Method (LDAP Module)

This method lists all groups a user is a part of.

Syntax

• Swift
• Objective-C

public func listUserGroups(user: String) throws -> Void

- (void)listUserGroups:(NSString*)user;

Remarks

This method lists all groups that the user specified by user is a part of. The GroupList event will fire once for each group the user is a part of.

Modify Method (LDAP Module)

This method performs a Lightweight Directory Access Protocol (LDAP) modify operation on the entry specified by DN .

Syntax

• Swift
• Objective-C

public func modify() throws -> Void

- (void)modify;

Remarks

This method performs an LDAP modify operation on the entry specified by DN. The attributes to modify should be set via the Attributes properties. When specifying multivalued attributes, specify the attribute type only in the first occurrence of that attribute type in the Attributes properties. Additional instances of the same attribute type should specify an attribute type of an empty string.

The modification can be a replacement, an addition, or a deletion, depending on the ModOp field of the attribute;. The result of the operation is returned through the Result event.

Example. Modify an Entry (Replace an Attribute Value):

LDAPControl.DN = "uid=TThompson,ou=Employees,dc=server" LDAPControl.AttributeCount = 2 LDAPControl.AttributeType(0) = "url" LDAPControl.AttributeValue(0) = "www.url1.net" LDAPControl.AttributeModOp(0) = amoReplace LDAPControl.AttributeType(0) = "" LDAPControl.AttributeValue(0) = "www.url2.net" LDAPControl.AttributeModOp(0) = amoReplace LDAPControl.Modify()

ModifyRDN Method (LDAP Module)

This method performs a Lightweight Directory Access Protocol (LDAP) modify RDN operation on an entry specified by DN .

Syntax

• Swift
• Objective-C

public func modifyRDN(newRDN: String) throws -> Void

- (void)modifyRDN:(NSString*)newRDN;

Remarks

This method performs an LDAP modify RDN operation on the entry specified by DN.

NewRDN is the new RDN for the entry specified by DN

The result of the operation is returned through the Result event.

MoveToDN Method (LDAP Module)

This method performs a Lightweight Directory Access Protocol (LDAP) modify operation on the entry specified by DN by changing its superior.

Syntax

• Swift
• Objective-C

public func moveToDN(newSuperior: String) throws -> Void

- (void)moveToDN:(NSString*)newSuperior;

Remarks

This method performs an LDAP modify operation on the entry specified by DN by changing its superior.

Note: None of the entry's attributes will change. DeleteOldRDN property will be set to True to delete the old entry. The result of the operation is returned through the Result event.

PauseData Method (LDAP Module)

This method pauses data reception.

Syntax

• Swift
• Objective-C

public func pauseData() throws -> Void

- (void)pauseData;

Remarks

This method pauses data reception when called. While data reception is paused, incoming data will not be processed and events will not fire. Call ProcessData to reenable data reception.

ProcessData Method (LDAP Module)

This method reenables data reception after a call to PauseData .

Syntax

• Swift
• Objective-C

public func processData() throws -> Void

- (void)processData;

Remarks

This method reenables data reception after a previous call to PauseData. Call this method to reenable data reception and allow IPPacket to fire.

Note: This method is used only after previously calling PauseData. It does not need to be called to process data by default.

Reset Method (LDAP Module)

Reset the component.

Syntax

• Swift
• Objective-C

public func reset() throws -> Void

- (void)reset;

Remarks

This method will reset the class's properties to their default values.

Search Method (LDAP Module)

This method searches the directory server using the base object specified in DN and the search filter SearchFilter .

Syntax

• Swift
• Objective-C

public func search(searchFilter: String) throws -> Void

- (void)search:(NSString*)searchFilter;

Remarks

This method searches the directory server using the base object specified in the DN and the search filter specified in the SearchFilter parameter. Additional search parameters are specified through the SearchScope, SearchDerefAliases, SearchSizeLimit, SearchTimeLimit, and SearchReturnValues properties.

If Attributes are specified before starting a search, the server will return only those results that contain a value for the specified attributes.

Results are returned through zero or more SearchResult events, after which a SearchComplete event is fired.

Example 1. Searching for a User:

LDAPControl.DN = "ou=Employees,dc=server" LDAPControl.Search("uid=TThompson")

A Directory-Specific Entries (DSE) search will search for the attributes of the server. Example 2. DSE Search:

LDAPControl.DN = "" LDAPControl.SearchScope = 0 LDAPControl.Search("objectClass=*")

SearchFilter is a string representation of the Lightweight Directory Access Protocol (LDAP) search filter used for the search.

The format of the search filter is specified by RFC 1558 and is identical to the format used by most LDAP applications.

The following are examples of search filters, as provided in the RFC:

Example 3. Search Filters:

     (cn=Babs Jensen)
     (!(cn=Tim Howes))
     (&(objectClass=Person)(|(sn=Jensen)(cn=Babs J*)))
     (o=univ*of*mich*)

The complete specification is given by the following BNF:

     <filter> ::= "(" <filtercomp> ")"
     <filtercomp> ::= <and> | <or> | <not> | <item>
     <and> ::= "&" <filterlist>
     <or> ::= "|" <filterlist>
     <not> ::= "!" <filter>
     <filterlist> ::= <filter> | <filter> <filterlist>
     <item> ::= <simple> | <present> | <substring>
     <simple> ::= <attr> <filtertype> <value>
     <filtertype> ::= <equal> | <approx> | <greater> | <less>
     <equal> ::= "="
     <approx> ::= "~="
     <greater> ::= ">="
     <less> ::= "<="
     <present> ::= <attr> "=*"
     <substring> ::= <attr> "=" <initial> <any> <final>
     <initial> ::= NULL | <value>
     <any> ::= "*" <starval>
     <starval> ::= NULL | <value> "*" <starval>
     <final> ::= NULL | <value>

<attr> is a string representing an attribute type as defined in RFC 1777. <value> is a string representing an attribute value, or part of one, and has the form defined in RFC 1779. If a <value> must contain one of the characters '*' or '(' or ')', these should be escaped by preceding them with the backslash '\' character.

Unbind Method (LDAP Module)

This method unbinds from the directory server.

Syntax

• Swift
• Objective-C

public func unbind() throws -> Void

- (void)unbind;

Remarks

This method unbinds from the directory server and breaks the connection.

ComputerList Event (LDAP Module)

This event is fired for each computer entry returned.

Syntax

• Swift
• Objective-C

func onComputerList(name: String, operatingSystem: String, lastLogon: String, logonCount: Int32, dn: String)

- (void)onComputerList:(NSString*)name :(NSString*)operatingSystem :(NSString*)lastLogon :(int)logonCount :(NSString*)dn;

Remarks

This event is fired once for each computer returned when the ListComputers method is called.

Connected Event (LDAP Module)

This event is fired immediately after a connection completes (or fails).

Syntax

• Swift
• Objective-C

func onConnected(statusCode: Int32, description: String)

- (void)onConnected:(int)statusCode :(NSString*)description;

Remarks

If the connection is made normally, StatusCode is 0 and Description is "OK".

If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

Please refer to the Error Codes section for more information.

ConnectionStatus Event (LDAP Module)

This event is fired to indicate changes in the connection state.

Syntax

• Swift
• Objective-C

func onConnectionStatus(connectionEvent: String, statusCode: Int32, description: String)

- (void)onConnectionStatus:(NSString*)connectionEvent :(int)statusCode :(NSString*)description;

Remarks

The ConnectionStatus event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

Disconnected Event (LDAP Module)

This event is fired when a connection is closed.

Syntax

• Swift
• Objective-C

func onDisconnected(statusCode: Int32, description: String)

- (void)onDisconnected:(int)statusCode :(NSString*)description;

Remarks

If the connection is broken normally, StatusCode is 0 and Description is "OK".

If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP/IP) subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error.

Please refer to the Error Codes section for more information.

Error Event (LDAP Module)

Information about errors during data delivery.

Syntax

• Swift
• Objective-C

func onError(errorCode: Int32, description: String)

- (void)onError:(int)errorCode :(NSString*)description;

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class .

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

ExtendedResponse Event (LDAP Module)

This event is fired for Lightweight Directory Access Protocol (LDAP) V3 extended responses.

Syntax

• Swift
• Objective-C

func onExtendedResponse(messageId: Int32, dn: String, resultCode: Int32, resultDescription: String, responseName: String, responseValue: Data)

- (void)onExtendedResponse:(int)messageId :(NSString*)DN :(int)resultCode :(NSString*)resultDescription :(NSString*)responseName :(NSData*)responseValue;

Remarks

The first four parameters are the same as the parameters of the Result event. ResponseName and ResponseValue are related to the corresponding parameters of the call to ExtendedRequest.

GroupList Event (LDAP Module)

This event is fired for each group entry returned.

Syntax

• Swift
• Objective-C

func onGroupList(name: String, description: String, dn: String)

- (void)onGroupList:(NSString*)name :(NSString*)description :(NSString*)dn;

Remarks

This event is fired once for each group entry returned when either of the ListGroups or ListUserGroups methods are called.

PITrail Event (LDAP Module)

This event provides detailed information about the interaction with the server.

Syntax

• Swift
• Objective-C

func onPITrail(direction: Int32, description: String, message: String)

- (void)onPITrail:(int)direction :(NSString*)description :(NSString*)message;

Remarks

The PITrail event provides detailed information about all communication with the server. This is useful for debugging purposes.

Direction specifies the origin of the data. Possible values are as follows:

• 0 - Client
• 1 - Server

Description is a short description of the current packet. This is human readable and useful for informational logging.

Message contains a hex-encoded version of the raw message. This represents the exact value sent over the wire.

Result Event (LDAP Module)

This event is fired for every server response, except for search responses.

Syntax

• Swift
• Objective-C

func onResult(messageId: Int32, dn: String, resultCode: Int32, resultDescription: String)

- (void)onResult:(int)messageId :(NSString*)DN :(int)resultCode :(NSString*)resultDescription;

Remarks

The MessageId parameter identifies the corresponding request. ResultCode and ResultDescription show whether or not the operation was successful (on a successful operation, the ResultCode is 0). For a full list of possible result codes, see the ResultCode property.

SearchComplete Event (LDAP Module)

This event is fired upon completion of a search operation.

Syntax

• Swift
• Objective-C

func onSearchComplete(messageId: Int32, dn: String, resultCode: Int32, resultDescription: String)

- (void)onSearchComplete:(int)messageId :(NSString*)DN :(int)resultCode :(NSString*)resultDescription;

Remarks

The MessageId parameter identifies the corresponding request. ResultCode and ResultDescription show whether the operation was successful (on a successful operation, the ResultCode is 0).

SearchPage Event (LDAP Module)

This event is fired for every page returned from a search operation.

Syntax

• Swift
• Objective-C

func onSearchPage(messageId: Int32, dn: String, resultCode: Int32, resultDescription: String, cancelSearch: inout Bool)

- (void)onSearchPage:(int)messageId :(NSString*)DN :(int)resultCode :(NSString*)resultDescription :(int*)cancelSearch;

Remarks

This event is fired so the client can decide whether or not to continue with the Search operation. The signature is very similar to the SearchComplete event, with the addition of a CancelSearch parameter. If the search should be canceled (no more pages), the CancelSearch parameter should be set to True.

SearchResult Event (LDAP Module)

This event is fired for every entry returned from a search operation.

Syntax

• Swift
• Objective-C

func onSearchResult(messageId: Int32, dn: String)

- (void)onSearchResult:(int)messageId :(NSString*)DN;

Remarks

MessageId identifies the corresponding search request. DN contains the distinguished name of the entry. The attribute type and value provided in the Attributes properties show the list of retrieved attributes for the entry.

Every search operation results in a sequence of 0 or more SearchResult events and a sequence of 0 or more SearchResultReference events, which are followed by a SearchComplete event.

SearchResultReference Event (LDAP Module)

This event is fired for every result reference returned from a search operation.

Syntax

• Swift
• Objective-C

func onSearchResultReference(messageId: Int32, ldapUrl: String)

- (void)onSearchResultReference:(int)messageId :(NSString*)ldapUrl;

Remarks

MessageId identifies the corresponding search request. LdapUrl contains a URL reference to a server that can be used for continuing the search operation.

Every search operation results in a sequence of 0 or more SearchResult events and a sequence of 0 or more SearchResultReference events, which are followed by a SearchComplete event.

SSLServerAuthentication Event (LDAP Module)

Fired after the server presents its certificate to the client.

Syntax

• Swift
• Objective-C

func onSSLServerAuthentication(certEncoded: Data, certSubject: String, certIssuer: String, status: String, accept: inout Bool)

- (void)onSSLServerAuthentication:(NSData*)certEncoded :(NSString*)certSubject :(NSString*)certIssuer :(NSString*)status :(int*)accept;

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (LDAP Module)

Shows the progress of the secure connection.

Syntax

• Swift
• Objective-C

func onSSLStatus(message: String)

- (void)onSSLStatus:(NSString*)message;

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

UserList Event (LDAP Module)

This event is fired once for each user entry returned.

Syntax

• Swift
• Objective-C

func onUserList(name: String, description: String, lastLogon: String, memberOf: String, dn: String)

- (void)onUserList:(NSString*)name :(NSString*)description :(NSString*)lastLogon :(NSString*)memberOf :(NSString*)dn;

Remarks

This event is fired once for each user entry returned when the ListGroupMembers method is called.

Firewall Type

This is the firewall the component will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall, such as the firewall and the .

Fields

Constructors

public init()

LDAPAttribute Type

This types describes an attribute for the current entry.

Remarks

This type describes an attribute for the current Lightweight Directory Access Protocol (LDAP) entry. The field is used only in Modify operations.

Fields

Constructors

public init()

public init(attributeType: )

LDAPReference Type

This type includes a reference returned from the server.

Remarks

This type describes a Lightweight Directory Access Protocol (LDAP) reference, which may be queried inside the SearchResult, SearchResultReference, Result, or SearchComplete events.

When inside a SearchResult or SearchResultReference event, references will be a search result reference (that is, a continuation reference), in which case they represent the URLs to contact to continue the search.

When inside a Result or SearchComplete event, a reference will be a regular referral, in which case it represents the URL to contact to complete the requested operation.

Fields

Constructors

public init()

Config Settings (LDAP Module)

LDAP Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Socket Config Settings

Base Config Settings

Trappable Errors (LDAP Module)

LDAP Errors

SSLClient Errors

SSL Errors

TCP/IP Errors