FTP Class

Properties   Methods   Events   Config Settings   Errors  

The FTP Class can be used to transfer files to and from FTP servers using the FTP protocol.

Class Name

IPWorksSSL_FTP

Procedural Interface

 ipworksssl_ftp_open();
 ipworksssl_ftp_close($res);
 ipworksssl_ftp_register_callback($res, $id, $function);
 ipworksssl_ftp_get_last_error($res);
 ipworksssl_ftp_get_last_error_code($res);
 ipworksssl_ftp_set($res, $id, $index, $value);
 ipworksssl_ftp_get($res, $id, $index);
 ipworksssl_ftp_do_abort($res);
 ipworksssl_ftp_do_append($res);
 ipworksssl_ftp_do_changeremotepath($res, $remotepath);
 ipworksssl_ftp_do_changetransfermode($res, $transfermode);
 ipworksssl_ftp_do_checkfileexists($res);
 ipworksssl_ftp_do_config($res, $configurationstring);
 ipworksssl_ftp_do_connect($res);
 ipworksssl_ftp_do_deletefile($res, $filename);
 ipworksssl_ftp_do_disconnect($res);
 ipworksssl_ftp_do_doevents($res);
 ipworksssl_ftp_do_download($res);
 ipworksssl_ftp_do_interrupt($res);
 ipworksssl_ftp_do_listdirectory($res);
 ipworksssl_ftp_do_listdirectorylong($res);
 ipworksssl_ftp_do_logoff($res);
 ipworksssl_ftp_do_logon($res);
 ipworksssl_ftp_do_makedirectory($res, $newdir);
 ipworksssl_ftp_do_queryfilesize($res);
 ipworksssl_ftp_do_queryfiletime($res);
 ipworksssl_ftp_do_queryremotepath($res);
 ipworksssl_ftp_do_removedirectory($res, $dirname);
 ipworksssl_ftp_do_renamefile($res, $newname);
 ipworksssl_ftp_do_reset($res);
 ipworksssl_ftp_do_sendcommand($res, $command);
 ipworksssl_ftp_do_storeunique($res);
 ipworksssl_ftp_do_upload($res);

Remarks

The FTP Class supports both plaintext and Secure Sockets Layer/Transport Layer Security (SSL/TLS) connections. When connecting over SSL/TLS the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL related settings are also supported via the Config method.

The FTP Class implements a standard FTP client as specified in RFC 959 and RFC 1579 with the added option of SSL security (RFC 2228) in both the protocol and data channels.

The first step in using the class is specifying the RemoteHost, User and Password. The file to upload to or download from is given by the RemoteFile property. The file to download to or upload from is specified by LocalFile. The current path in the server is set by calling ChangeRemotePath. The Passive property is especially useful if the client is behind a firewall, which inhibits incoming connections to higher ports.

If LocalFile is set to something other than an empty string, then files are received in LocalFile, and otherwise data are received through the Transfer event. StartTransfer and EndTransfer are fired at the beginning and end of transmission.

The PITrail event traces the interaction between the client and the server (the FTP protocol interface connection).

Directory listings are received through the DirList event.

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.

Account Property (IPWorksSSL_FTP Class)

The property includes the user account needed to log in.

Object Oriented Interface

public function getAccount();


public function setAccount($value);

Procedural Interface

ipworksssl_ftp_get($res, 1 );


ipworksssl_ftp_set($res, 1, $value );

Default Value

''

Remarks

This property contains the user account to use when logging in. Some servers may require an Account to Logon or to access specific privileges, such as uploading or deleting files.

Data Type

String

Command Property (IPWorksSSL_FTP Class)

This property is used to send additional commands directly to the server.

Object Oriented Interface

public function setCommand($value);

Procedural Interface

ipworksssl_ftp_set($res, 2, $value );

Default Value

''

Remarks

This property can be used to send additional commands directly to the server. Check the LastReply property or trap the PITrail events coming from the server to get the response.

This property is write-only and not available at design time.

Data Type

String

Connected Property (IPWorksSSL_FTP Class)

This shows whether the class is connected.

Object Oriented Interface

public function getConnected();


public function setConnected($value);

Procedural Interface

ipworksssl_ftp_get($res, 3 );


ipworksssl_ftp_set($res, 3, $value );

Default Value

false

Remarks

This property is used to determine whether or not the class is connected to the remote host.

Note: It is recommended to use the Connect or Disconnect method instead of setting this property.

This property is not available at design time.

Data Type

Boolean

DirListCount Property (IPWorksSSL_FTP Class)

The number of records in the DirList arrays.

Object Oriented Interface

public function getDirListCount();

Procedural Interface

ipworksssl_ftp_get($res, 4 );

Default Value

0

Remarks

This property controls the size of the following arrays:

• DirListEntry
• DirListFileName
• DirListFileSize
• DirListFileTime
• DirListIsDir

The array indices start at 0 and end at DirListCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

DirListEntry Property (IPWorksSSL_FTP Class)

This property contains the raw entry as received from the server.

Object Oriented Interface

public function getDirListEntry($entryindex);

Procedural Interface

ipworksssl_ftp_get($res, 5 , $entryindex);

Default Value

''

Remarks

This property contains the raw entry as received from the server. It is the complete unparsed entry in the directory listing.

The $entryindex parameter specifies the index of the item in the array. The size of the array is controlled by the DirListCount property.

This property is read-only and not available at design time.

Data Type

String

DirListFileName Property (IPWorksSSL_FTP Class)

This property shows the file name in the last directory listing.

Object Oriented Interface

public function getDirListFileName($entryindex);

Procedural Interface

ipworksssl_ftp_get($res, 6 , $entryindex);

Default Value

''

Remarks

This property shows the file name in the last directory listing. This also may be the directory name if a directory is being listed. You can tell whether it is a file or a directory by the Boolean DirListIsDir property.

The $entryindex parameter specifies the index of the item in the array. The size of the array is controlled by the DirListCount property.

This property is read-only and not available at design time.

Data Type

String

DirListFileSize Property (IPWorksSSL_FTP Class)

This property shows the file size in the last directory listing.

Object Oriented Interface

public function getDirListFileSize($entryindex);

Procedural Interface

ipworksssl_ftp_get($res, 7 , $entryindex);

Default Value

0

Remarks

This property shows the file size in the last directory listing.

The $entryindex parameter specifies the index of the item in the array. The size of the array is controlled by the DirListCount property.

This property is read-only and not available at design time.

Data Type

Long64

DirListFileTime Property (IPWorksSSL_FTP Class)

This property shows the file time in the last directory listing.

Object Oriented Interface

public function getDirListFileTime($entryindex);

Procedural Interface

ipworksssl_ftp_get($res, 8 , $entryindex);

Default Value

''

Remarks

This property shows the file time in the last directory listing. This contains the date/time stamp in which the file was created.

Note: In Unix systems, the date is given in two types of formats: If the date is in the past 12 months, the exact time is specified and the year is omitted. Otherwise, only the date and the year, but not hours or minutes, are given.

The $entryindex parameter specifies the index of the item in the array. The size of the array is controlled by the DirListCount property.

This property is read-only and not available at design time.

Data Type

String

DirListIsDir Property (IPWorksSSL_FTP Class)

This property specifies whether entries in the last directory listing are directories.

Object Oriented Interface

public function getDirListIsDir($entryindex);

Procedural Interface

ipworksssl_ftp_get($res, 9 , $entryindex);

Default Value

false

Remarks

This property specifies whether entries in the last directory listing are directories. This Boolean value denotes whether or not the directory entry listed in DirListFileName is a file or a directory.

The $entryindex parameter specifies the index of the item in the array. The size of the array is controlled by the DirListCount property.

This property is read-only and not available at design time.

Data Type

Boolean

FileExists Property (IPWorksSSL_FTP Class)

This property returns True if the file specified by RemoteFile exists on the remote server.

Object Oriented Interface

public function getFileExists();

Procedural Interface

ipworksssl_ftp_get($res, 10 );

Default Value

false

Remarks

This property returns True if the file exists on the remote server. It returns False if the file does not exist. You must specify the file you wish to check by setting the RemoteFile before calling this method.

If the class is busy or is not connected, 0 is returned.

If no FTP session is in place, one is automatically created by first calling the Logon method.

This property is read-only and not available at design time.

Data Type

Boolean

FileSize Property (IPWorksSSL_FTP Class)

This is the size of the file pointed to by RemoteFile .

Object Oriented Interface

public function getFileSize();

Procedural Interface

ipworksssl_ftp_get($res, 11 );

Default Value

0

Remarks

When this property is read, the FTP server is queried for the file size, and the response is provided as the property value.

If the class is busy or is not connected, 0 is returned.

This property is read-only and not available at design time.

Data Type

Long64

FileTime Property (IPWorksSSL_FTP Class)

This is the last modification time of the file pointed to by RemoteFile .

Object Oriented Interface

public function getFileTime();

Procedural Interface

ipworksssl_ftp_get($res, 12 );

Default Value

''

Remarks

When this property is read, the FTP server is queried for the file modification time, and the response is provided as the property value. The time will be converted to the local time zone.

If the class is busy or is not connected, an empty string is returned.

This property is read-only and not available at design time.

Data Type

String

FirewallAutoDetect Property (IPWorksSSL_FTP Class)

This property tells the class whether or not to automatically detect and use firewall system settings, if available.

Object Oriented Interface

public function getFirewallAutoDetect();


public function setFirewallAutoDetect($value);

Procedural Interface

ipworksssl_ftp_get($res, 13 );


ipworksssl_ftp_set($res, 13, $value );

Default Value

false

Remarks

This property tells the class whether or not to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (IPWorksSSL_FTP Class)

This property determines the type of firewall to connect through.

Object Oriented Interface

public function getFirewallType();


public function setFirewallType($value);

Procedural Interface

ipworksssl_ftp_get($res, 14 );


ipworksssl_ftp_set($res, 14, $value );

Default Value

0

Remarks

This property determines the type of firewall to connect through. The applicable values are as follows:

Data Type

Integer

FirewallHost Property (IPWorksSSL_FTP Class)

This property contains the name or IP address of firewall (optional).

Object Oriented Interface

public function getFirewallHost();


public function setFirewallHost($value);

Procedural Interface

ipworksssl_ftp_get($res, 15 );


ipworksssl_ftp_set($res, 15, $value );

Default Value

''

Remarks

This property contains the name or IP address of firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the class fails with an error.

Data Type

String

FirewallPassword Property (IPWorksSSL_FTP Class)

This property contains a password if authentication is to be used when connecting through the firewall.

Object Oriented Interface

public function getFirewallPassword();


public function setFirewallPassword($value);

Procedural Interface

ipworksssl_ftp_get($res, 16 );


ipworksssl_ftp_set($res, 16, $value );

Default Value

''

Remarks

This property contains a password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the class fails with an error.

Data Type

String

FirewallPort Property (IPWorksSSL_FTP Class)

This property contains the transmission control protocol (TCP) port for the firewall Host .

Object Oriented Interface

public function getFirewallPort();


public function setFirewallPort($value);

Procedural Interface

ipworksssl_ftp_get($res, 17 );


ipworksssl_ftp_set($res, 17, $value );

Default Value

0

Remarks

This property contains the transmission control protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (IPWorksSSL_FTP Class)

This property contains a user name if authentication is to be used connecting through a firewall.

Object Oriented Interface

public function getFirewallUser();


public function setFirewallUser($value);

Procedural Interface

ipworksssl_ftp_get($res, 18 );


ipworksssl_ftp_set($res, 18, $value );

Default Value

''

Remarks

This property contains a user name if authentication is to be used connecting through a firewall. If the FirewallHost is specified, this property and FirewallPassword properties are used to connect and authenticate to the given Firewall. If the authentication fails, the class fails with an error.

Data Type

String

Idle Property (IPWorksSSL_FTP Class)

The current status of the class.

Object Oriented Interface

public function getIdle();

Procedural Interface

ipworksssl_ftp_get($res, 19 );

Default Value

true

Remarks

Idle will be False if the component is currently busy (communicating and/or waiting for an answer), and True at all other times.

This property is read-only.

Data Type

Boolean

LastReply Property (IPWorksSSL_FTP Class)

The last reply from the server.

Object Oriented Interface

public function getLastReply();

Procedural Interface

ipworksssl_ftp_get($res, 20 );

Default Value

''

Remarks

This property indicates the last reply received from the server. It can be used for informational purposes. The same information and more can also be retrieved through the PITrail event.

This property is read-only.

Data Type

String

LocalFile Property (IPWorksSSL_FTP Class)

This is the path to a local file for download or upload. If the file exists, it is overwritten.

Object Oriented Interface

public function getLocalFile();


public function setLocalFile($value);

Procedural Interface

ipworksssl_ftp_get($res, 21 );


ipworksssl_ftp_set($res, 21, $value );

Default Value

''

Remarks

This property is used by the Upload and Download methods to specify the path to a local file to be downloaded or uploaded. See the method descriptions for more information.

Example (Setting LocalFile)

FTPControl.LocalFile = "C:\localfile.txt" FTPControl.RemoteFile = "remotefile.txt" FTPControl.Download() FTPControl.LocalFile = "C:\localfile2.txt" FTPControl.RemoteFile = "folder/remotefile2.txt" FTPControl.Download()

Data Type

String

LocalHost Property (IPWorksSSL_FTP Class)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Object Oriented Interface

public function getLocalHost();


public function setLocalHost($value);

Procedural Interface

ipworksssl_ftp_get($res, 22 );


ipworksssl_ftp_set($res, 22, $value );

Default Value

''

Remarks

The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

Overwrite Property (IPWorksSSL_FTP Class)

This indicates whether or not the class should overwrite files during transfer.

Object Oriented Interface

public function getOverwrite();


public function setOverwrite($value);

Procedural Interface

ipworksssl_ftp_get($res, 23 );


ipworksssl_ftp_set($res, 23, $value );

Default Value

false

Remarks

This property is a value indicating whether or not the class should overwrite downloaded files. If Overwrite is False, an error will be thrown whenever LocalFile exists before a download operation.

Data Type

Boolean

Passive Property (IPWorksSSL_FTP Class)

This controls whether or not to direct the server into a passive mode. It is recommended if behind a firewall.

Object Oriented Interface

public function getPassive();


public function setPassive($value);

Procedural Interface

ipworksssl_ftp_get($res, 24 );


ipworksssl_ftp_set($res, 24, $value );

Default Value

true

Remarks

This property controls whether or not to direct the server into a passive mode. Many firewalls will not allow the FTP server to open a connection from outside to the higher ports where the FTP client class expects them to be. If Passive is set to TRUE, the class will use the PASV command instead of the PORT command and thus will direct the server into a passive mode: connections are initiated only by the client.

Data Type

Boolean

Password Property (IPWorksSSL_FTP Class)

This is the password used to log in.

Object Oriented Interface

public function getPassword();


public function setPassword($value);

Procedural Interface

ipworksssl_ftp_get($res, 25 );


ipworksssl_ftp_set($res, 25, $value );

Default Value

''

Remarks

This property contains the password used to log in. It must be set before the class connects to the FTP server.

Data Type

String

RemoteFile Property (IPWorksSSL_FTP Class)

This is the name of the remote file for uploading, downloading, and performing other operations.

Object Oriented Interface

public function getRemoteFile();


public function setRemoteFile($value);

Procedural Interface

ipworksssl_ftp_get($res, 26 );


ipworksssl_ftp_set($res, 26, $value );

Default Value

''

Remarks

This property contains the name of the remote file to be uploaded or downloaded and is either an absolute file path or a relative path based on the remote path set by calling ChangeRemotePath.

A number of methods use RemoteFile as an argument.

Example 1. Setting RemoteFile:

FTPControl.LocalFile = "C:\localfile.txt" FTPControl.RemoteFile = "remotefile.txt" FTPControl.Download() FTPControl.LocalFile = "C:\localfile2.txt" FTPControl.RemoteFile = "folder/remotefile2.txt" FTPControl.Download()

Note: As long as file masks are supported by the server, then this property will act as a file mask when performing ListDirectory or ListDirectoryLong. If not supported, then ApplyFileMaskLocally could be set to True to filter the results locally.

Example 2. Using RemoteFile as a file mask: FTPControl.RemoteFile = "*.txt" FTPControl.ListDirectory()

The following special characters are supported for pattern matching:

If these characters need to be used as a literal in a pattern, then they must be escaped by surrounding them with brackets []. Note: "]" and "-" do not need to be escaped. See below for the escape sequences:

For example, to match the value [Something].txt, specify the pattern [[]Something].txt.

Data Type

String

RemoteHost Property (IPWorksSSL_FTP Class)

This is the domain name or IP address of the FTP server.

Object Oriented Interface

public function getRemoteHost();


public function setRemoteHost($value);

Procedural Interface

ipworksssl_ftp_get($res, 27 );


ipworksssl_ftp_set($res, 27, $value );

Default Value

''

Remarks

This property specifies the IP address (IP number in dotted internet format) or the domain name of the FTP server. It is set before a connection is attempted and cannot be changed once a connection is in progress.

If this property is set to a domain name, a DNS request is initiated and upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, an error is returned.

If the class is configured to use a SOCKS firewall, the value assigned to this property may be preceded with an "*". If this is the case, the host name is passed to the firewall unresolved and the firewall performs the DNS resolution.

Data Type

String

RemotePath Property (IPWorksSSL_FTP Class)

This is the current path in the FTP server.

Object Oriented Interface

public function getRemotePath();


public function setRemotePath($value);

Procedural Interface

ipworksssl_ftp_get($res, 28 );


ipworksssl_ftp_set($res, 28, $value );

Default Value

''

Remarks

This property shows the current working directory on the FTP server. It also can be used to change the working directory by setting it to an absolute directory path, or a relative path with respect to the existing value of this property.

If the first two bytes of the new path are "..", then a change to one level higher in the directory tree is performed.

Setting this property causes the class to send the appropriate command to the remote server only if it is connected.

Example 1. Changing Directory:

FTPControl.Logon() FTPControl.RemotePath = "/home/user"

Data Type

String

RemotePort Property (IPWorksSSL_FTP Class)

This is the port for the FTP service (default is 21).

Object Oriented Interface

public function getRemotePort();


public function setRemotePort($value);

Procedural Interface

ipworksssl_ftp_get($res, 29 );


ipworksssl_ftp_set($res, 29, $value );

Default Value

21

Remarks

This property contains the port for the FTP service, which defaults to 21 if not set. A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

For an implicit Secure Sockets Layer (SSL), use port 990 (please see the SSLStartMode property for more information).

This property is not available at design time.

Data Type

Integer

SSLAcceptServerCertEncoded Property (IPWorksSSL_FTP Class)

This is the certificate (PEM/base64 encoded).

Object Oriented Interface

public function getSSLAcceptServerCertEncoded();


public function setSSLAcceptServerCertEncoded($value);

Procedural Interface

ipworksssl_ftp_get($res, 31 );


ipworksssl_ftp_set($res, 31, $value );

Default Value

''

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Binary String

SSLCertEncoded Property (IPWorksSSL_FTP Class)

This is the certificate (PEM/base64 encoded).

Object Oriented Interface

public function getSSLCertEncoded();


public function setSSLCertEncoded($value);

Procedural Interface

ipworksssl_ftp_get($res, 59 );


ipworksssl_ftp_set($res, 59, $value );

Default Value

''

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Binary String

SSLCertStore Property (IPWorksSSL_FTP Class)

This is the name of the certificate store for the client certificate.

Object Oriented Interface

public function getSSLCertStore();


public function setSSLCertStore($value);

Procedural Interface

ipworksssl_ftp_get($res, 75 );


ipworksssl_ftp_set($res, 75, $value );

Default Value

'MY'

Remarks

This is the name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Binary String

SSLCertStorePassword Property (IPWorksSSL_FTP Class)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Object Oriented Interface

public function getSSLCertStorePassword();


public function setSSLCertStorePassword($value);

Procedural Interface

ipworksssl_ftp_get($res, 76 );


ipworksssl_ftp_set($res, 76, $value );

Default Value

''

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (IPWorksSSL_FTP Class)

This is the type of certificate store for this certificate.

Object Oriented Interface

public function getSSLCertStoreType();


public function setSSLCertStoreType($value);

Procedural Interface

ipworksssl_ftp_get($res, 77 );


ipworksssl_ftp_set($res, 77, $value );

Default Value

0

Remarks

This is the type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubject Property (IPWorksSSL_FTP Class)

This is the subject of the certificate used for client authentication.

Object Oriented Interface

public function getSSLCertSubject();


public function setSSLCertSubject($value);

Procedural Interface

ipworksssl_ftp_get($res, 78 );


ipworksssl_ftp_set($res, 78, $value );

Default Value

''

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLProvider Property (IPWorksSSL_FTP Class)

This specifies the SSL/TLS implementation to use.

Object Oriented Interface

public function getSSLProvider();


public function setSSLProvider($value);

Procedural Interface

ipworksssl_ftp_get($res, 86 );


ipworksssl_ftp_set($res, 86, $value );

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected, on Windows the class will use the platform implementation. On Linux/macOS the class will use the internal implementation. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used on all platforms.

Data Type

Integer

SSLServerCertEncoded Property (IPWorksSSL_FTP Class)

This is the certificate (PEM/base64 encoded).

Object Oriented Interface

public function getSSLServerCertEncoded();

Procedural Interface

ipworksssl_ftp_get($res, 88 );

Default Value

''

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

This property is read-only and not available at design time.

Data Type

Binary String

SSLStartMode Property (IPWorksSSL_FTP Class)

Determines how the class starts the SSL negotiation.

Object Oriented Interface

public function getSSLStartMode();


public function setSSLStartMode($value);

Procedural Interface

ipworksssl_ftp_get($res, 115 );


ipworksssl_ftp_set($res, 115, $value );

Default Value

0

Remarks

The SSLStartMode property may have one of the following values:

Data Type

Integer

StartByte Property (IPWorksSSL_FTP Class)

This is the byte index in RemoteFile and LocalFile from which to start a transmission.

Object Oriented Interface

public function getStartByte();


public function setStartByte($value);

Procedural Interface

ipworksssl_ftp_get($res, 116 );


ipworksssl_ftp_set($res, 116, $value );

Default Value

'0'

Remarks

This property contains a zero-based index in both RemoteFile and LocalFile that determines the point from which the transmission of data begins. This is useful for resuming interrupted downloads and uploads of files from FTP servers.

Once set, the StartByte index is used for all future downloads and uploads. The property must be reset to "0" for normal downloads and uploads.

The type of the property is a string instead of numeric value to allow for certain implementations that expect an alphanumeric marker for the start index.

In the Transfer event, the TransferredBytes parameter will include the bytes skipped (i.e., it will show StartByte more bytes than actually transferred).

Note: Some FTP servers may not support the FTP REST command. If that is the case with the server you are accessing, you will not be able to use the StartByte property.

This property is not available at design time.

Data Type

String

Timeout Property (IPWorksSSL_FTP Class)

A timeout for the class.

Object Oriented Interface

public function getTimeout();


public function setTimeout($value);

Procedural Interface

ipworksssl_ftp_get($res, 117 );


ipworksssl_ftp_set($res, 117, $value );

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the class will wait for the operation to complete before returning control.

The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the class fails with an error.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

TransferMode Property (IPWorksSSL_FTP Class)

This property includes the transfer mode (ASCII or binary). If the value is 0 (default), the initial server mode will be used.

Object Oriented Interface

public function getTransferMode();


public function setTransferMode($value);

Procedural Interface

ipworksssl_ftp_get($res, 118 );


ipworksssl_ftp_set($res, 118, $value );

Default Value

0

Remarks

This property specifies the transfer mode, which is either ASCII or binary. The valid options for the TransferMode property are as follows:

Note: It is recommended to use the ChangeTransferMode method instead of setting this property.

Data Type

Integer

User Property (IPWorksSSL_FTP Class)

This property contains the user identifier to use to log in.

Object Oriented Interface

public function getUser();


public function setUser($value);

Procedural Interface

ipworksssl_ftp_get($res, 119 );


ipworksssl_ftp_set($res, 119, $value );

Default Value

''

Remarks

This property contains the user identifier to be used when logging in. It must be set before the class connects to the FTP server.

Data Type

String

Abort Method (IPWorksSSL_FTP Class)

The method aborts the current upload or download.

Object Oriented Interface

public function doAbort();

Procedural Interface

ipworksssl_ftp_do_abort($res);

Remarks

This method sends an ABOR command to the FTP server. It is used to interrupt file uploads and downloads.

Append Method (IPWorksSSL_FTP Class)

This method appends data from LocalFile to a RemoteFile on an FTP server.

Object Oriented Interface

public function doAppend();

Procedural Interface

ipworksssl_ftp_do_append($res);

Remarks

This method causes the server-data transfer process (DTP) to accept the data transferred through the data connection and to store the data in a file on the server site. If the file specified in the pathname exists on the server site, then the data shall be appended to that file; otherwise, the file specified in the pathname shall be created on the server site. This method is similar to the Upload method, but the local file specified by LocalFile is appended to RemoteFile on the server as opposed to replacing it, as with the Upload method. RemoteFile is either an absolute path on the server, or a path relative to the current path set by ChangeRemotePath. The server will create a file with that name if it doesn't already exist (similar to upload). If no FTP session is in place, one is automatically created by first calling the Logon method.

ChangeRemotePath Method (IPWorksSSL_FTP Class)

This method changes the current path on the FTP server.

Object Oriented Interface

public function doChangeRemotePath($remotepath);

Procedural Interface

ipworksssl_ftp_do_changeremotepath($res, $remotepath);

Remarks

This method changes the current path on the FTP server to the specified RemotePath. When called, the class will issue a command to the server to change the directory. The RemotePath parameter may hold an absolute or relative path.

Absolute Paths

If the path begins with a /, it is considered an absolute path and must specify the entire path from the root of the server. For instance:

component.ChangeRemotePath("/home/testuser/myfolder");

Relative Paths

If the path does not begin with a /, it is considered a relative path and is resolved in relation to the current directory. For instance, a value of myfolder will indicate a subfolder of the current directory. The special value .. refers to the parent directory of the current path. For instance:

//Change to the 'myfolder' sub-directory component.ChangeRemotePath("myfolder"); //Navigate up two levels and then into the 'another/folder' path. component.ChangeRemotePath("../../another/folder");

ChangeTransferMode Method (IPWorksSSL_FTP Class)

This method changes the transfer mode for the current connection.

Object Oriented Interface

public function doChangeTransferMode($transfermode);

Procedural Interface

ipworksssl_ftp_do_changetransfermode($res, $transfermode);

Remarks

This method optionally changes the transfer mode used for the connection. The TransferMode parameter indicates the new transfer mode to be used.

In many cases, it is not necessary to explicitly change the transfer mode; however, the binary transfer mode is useful to ensure that files are preserved byte-for-byte during the transfer. For instance, when uploading or downloading images or archives, the binary transfer mode will ensure that no line-ending transformations are performed by the server before data are transmitted.

Valid values for the TransferMode parameter are as follows:

CheckFileExists Method (IPWorksSSL_FTP Class)

This method returns True if the file specified by RemoteFile exists on the server.

Object Oriented Interface

public function doCheckFileExists();

Procedural Interface

ipworksssl_ftp_do_checkfileexists($res);

Remarks

This method sends a command to the server to determine if the file specified by RemoteFile exists. If the file exists, this method returns true, otherwise it returns false. RemoteFile must be specified before calling this method. For instance: component.ChangeRemotePath("/home/testuser/myfolder"); component.RemoteFile = "test.txt"; if(component.CheckFileExists()) { //Do something }

Config Method (IPWorksSSL_FTP Class)

Sets or retrieves a configuration setting.

Object Oriented Interface

public function doConfig($configurationstring);

Procedural Interface

ipworksssl_ftp_do_config($res, $configurationstring);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (IPWorksSSL_FTP Class)

This method connects to the FTP server without logging in.

Object Oriented Interface

public function doConnect();

Procedural Interface

ipworksssl_ftp_do_connect($res);

Remarks

This method establishes a connection with the RemoteHost but does not log in. In most cases, it is recommended to use the Logon method, which will both establish a connection and log in to the server.

This method may be useful in cases in which it is desirable to separate the connection and logon operations, for instance, confirming that a host is available by first creating the connection.

DeleteFile Method (IPWorksSSL_FTP Class)

This method removes a file specified by FileName from an FTP server.

Object Oriented Interface

public function doDeleteFile($filename);

Procedural Interface

ipworksssl_ftp_do_deletefile($res, $filename);

Remarks

This method is used to remove a file specified by FileName from an FTP server. The remote file or directory specified by FileName is deleted. FileName is either an absolute path on the server, or a path relative to remote path set by ChangeRemotePath. If no FTP session is in place, one is automatically created by first calling the Logon method.

Disconnect Method (IPWorksSSL_FTP Class)

This method disconnects from the server without first logging off.

Object Oriented Interface

public function doDisconnect();

Procedural Interface

ipworksssl_ftp_do_disconnect($res);

Remarks

This method immediately disconnects from the server without first logging off.

In most cases, the Logoff method should be used to log off and disconnect from the server. Call the Disconnect method in cases in which it is desirable to immediately disconnect without first logging off.

DoEvents Method (IPWorksSSL_FTP Class)

Processes events from the internal message queue.

Object Oriented Interface

public function doEvents();

Procedural Interface

ipworksssl_ftp_do_doevents($res);

Remarks

When DoEvents is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.

Download Method (IPWorksSSL_FTP Class)

This method downloads a RemoteFile from an FTP server.

Object Oriented Interface

public function doDownload();

Procedural Interface

ipworksssl_ftp_do_download($res);

Remarks

This method is used to download the remote file specified by RemoteFile to the local file specified by LocalFile, or it is retrieved through the Transfer event if the LocalFile property is "" (empty string). RemoteFile is either an absolute path on the server or a path relative to a remote path set by calling ChangeRemotePath. If no FTP session is in place, one is automatically created by first calling the Logon method.

Example (Download a File)

FTPControl.LocalFile = "C:\localfile.txt" FTPControl.RemoteFile = "remotefile.txt" FTPControl.Download() FTPControl.LocalFile = "C:\localfile2.txt" FTPControl.RemoteFile = "folder/remotefile2.txt" FTPControl.Download()

Interrupt Method (IPWorksSSL_FTP Class)

Interrupt the current method.

Object Oriented Interface

public function doInterrupt();

Procedural Interface

ipworksssl_ftp_do_interrupt($res);

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ListDirectory Method (IPWorksSSL_FTP Class)

List the current directory specified by ChangeRemotePath on an FTP server.

Object Oriented Interface

public function doListDirectory();

Procedural Interface

ipworksssl_ftp_do_listdirectory($res);

Remarks

This method is used to list the directory (or file mask) specified in RemoteFile. RemoteFile is either an absolute path on the server, or a path relative to the remote path set by ChangeRemotePath. The file listing is received through the DirList event.

Similar to ListDirectoryLong, except that only file names are returned.

Note: Because RemoteFile acts as a file mask, to retrieve a complete directory listing RemoteFile should be set to an empty string or a mask like "*". If no FTP session is in place, one is automatically created by first calling the Logon method.

ListDirectoryLong Method (IPWorksSSL_FTP Class)

This method lists extended directory information for the remote path specified by calling ChangeRemotePath .

Object Oriented Interface

public function doListDirectoryLong();

Procedural Interface

ipworksssl_ftp_do_listdirectorylong($res);

Remarks

This method is used to request a directory (or file mask) listing specified in RemoteFile. RemoteFile is either an absolute path on the server, or a path relative to the remote path set by calling ChangeRemotePath. The file listing is received through the DirList event. Extended file information is returned.

Note: Because RemoteFile acts as a file mask, to retrieve a complete directory listing RemoteFile should be set to empty string or a mask like "*". If no FTP session is in place, one is automatically created by first calling the Logon method.

Logoff Method (IPWorksSSL_FTP Class)

This method is used to log off from the FTP server by posting a QUIT command.

Object Oriented Interface

public function doLogoff();

Procedural Interface

ipworksssl_ftp_do_logoff($res);

Remarks

This method is used to log off from the FTP server by posting a QUIT command. If that fails, the connection is terminated by the local host.

Logon Method (IPWorksSSL_FTP Class)

This method is used to log on to the FTP RemoteHost using the current User and Password .

Object Oriented Interface

public function doLogon();

Procedural Interface

ipworksssl_ftp_do_logon($res);

Remarks

This method is used to log on to the FTP server using the current User and Password. If TransferMode is not 0 (Default), then the FTP transfer mode is set to the appropriate value.

Example (Logging On)

FTPControl.RemoteHost = "ftpserver" FTPControl.User = "username" FTPControl.Password = "password" FTPControl.Logon()

MakeDirectory Method (IPWorksSSL_FTP Class)

This method is used to create a directory on the FTP server.

Object Oriented Interface

public function doMakeDirectory($newdir);

Procedural Interface

ipworksssl_ftp_do_makedirectory($res, $newdir);

Remarks

This method is used to create a directory with a path specified by NewDir on the FTP server. NewDir is either an absolute path on the server, or a path relative to the remote path that is set by calling ChangeRemotePath. If no FTP session is in place, one is automatically created by first calling the Logon method.

Note: When MakeDirectory is called, RemoteFile is changed to NewDir.

QueryFileSize Method (IPWorksSSL_FTP Class)

This returns the size of the file specified by RemoteFile .

Object Oriented Interface

public function doQueryFileSize();

Procedural Interface

ipworksssl_ftp_do_queryfilesize($res);

Remarks

This method sends the SIZE command to the server to obtain the size (in bytes) of the file specified by RemoteFile. RemoteFile must be specified before calling this method. For instance: component.ChangeRemotePath("/home/testuser/myfolder"); component.RemoteFile = "test.txt"; long myFileSize = component.QueryFileSize();

If RemoteFile does not exist on the server, the class fails with an error.

QueryFileTime Method (IPWorksSSL_FTP Class)

This returns the modified time of the file specified by RemoteFile .

Object Oriented Interface

public function doQueryFileTime();

Procedural Interface

ipworksssl_ftp_do_queryfiletime($res);

Remarks

This method sends the MDTM command to the server to obtain the modified time of the file specified by RemoteFile. The time returned by this method will be converted to the local timezone. RemoteFile must be specified before calling this method. For instance: component.ChangeRemotePath("/home/testuser/myfolder"); component.RemoteFile = "test.txt"; string myModifiedTime = component.QueryFileTime();

The FileTimeFormat configuration setting controls the format of the returned value.

QueryRemotePath Method (IPWorksSSL_FTP Class)

This queries the server for the current path.

Object Oriented Interface

public function doQueryRemotePath();

Procedural Interface

ipworksssl_ftp_do_queryremotepath($res);

Remarks

This method queries the server for the current path. When called, the class will issue a command to the server to retrieve the current path value. The return value of this method is the path returned by the server. For instance:

string remotePath = component.QueryRemotePath();

RemoveDirectory Method (IPWorksSSL_FTP Class)

This removes a directory specified by DirName from an FTP server.

Object Oriented Interface

public function doRemoveDirectory($dirname);

Procedural Interface

ipworksssl_ftp_do_removedirectory($res, $dirname);

Remarks

This method is used to remove a directory with path specified by DirName from the FTP server. DirName is either an absolute path on the server, or a path relative to the remote path set by calling ChangeRemotePath. If no FTP session is in place, one is automatically created by first calling the Logon method.

RenameFile Method (IPWorksSSL_FTP Class)

This changes the name of RemoteFile to NewName .

Object Oriented Interface

public function doRenameFile($newname);

Procedural Interface

ipworksssl_ftp_do_renamefile($res, $newname);

Remarks

This method is used to change the name of a remote file, specified by RemoteFile to NewName. RemoteFile and NewName are either absolute paths on the server, or a path relative to a remote path set by calling ChangeRemotePath. If no FTP session is in place, one is automatically created by first calling the Logon method.

Reset Method (IPWorksSSL_FTP Class)

Reset the class.

Object Oriented Interface

public function doReset();

Procedural Interface

ipworksssl_ftp_do_reset($res);

Remarks

This method will reset the class's properties to their default values.

SendCommand Method (IPWorksSSL_FTP Class)

Sends the exact command directly to the server.

Object Oriented Interface

public function doSendCommand($command);

Procedural Interface

ipworksssl_ftp_do_sendcommand($res, $command);

Remarks

This method sends the command specified by Command to the server exactly as it is provided. Use this method to send additional or custom commands directly to the server.

After calling this method check the LastReply property and/or monitor the PITrail event to obtain the server's response.

StoreUnique Method (IPWorksSSL_FTP Class)

This method uploads a file with a unique name to an FTP server.

Object Oriented Interface

public function doStoreUnique();

Procedural Interface

ipworksssl_ftp_do_storeunique($res);

Remarks

This method is used to upload a file with a unique name to an FTP server. This is similar to the Upload method, but the server determines a unique name for the LocalFile to be saved on the current directory set by calling ChangeRemotePath. The server includes the new name of the file in its response. The user should check the PITrail event, or LastReply property to retrieve this generated filename.

Upload Method (IPWorksSSL_FTP Class)

This method uploads a file specified by LocalFile to an FTP server.

Object Oriented Interface

public function doUpload();

Procedural Interface

ipworksssl_ftp_do_upload($res);

Remarks

This method uploads a local file specified by LocalFile to the remote file specified by RemoteFile. RemoteFile is either an absolute path on the server, or a path relative to the remote path set by calling ChangeRemotePath. If no FTP session is in place, one is automatically created by first calling the Logon method.

If you want to append to a server file, please refer to the Append method.

Example 1: Upload a File

FTPControl.LocalFile = "C:\localfile.txt" FTPControl.RemoteFile = "remotefile.txt" FTPControl.Upload() FTPControl.LocalFile = "C:\localfile2.txt" FTPControl.RemoteFile = "folder/remotefile2.txt" FTPControl.Upload()

ConnectionStatus Event (IPWorksSSL_FTP Class)

This event is fired to indicate changes in the connection state.

Object Oriented Interface

public function fireConnectionStatus($param);

Procedural Interface

ipworksssl_ftp_register_callback($res, 1, array($this, 'fireConnectionStatus'));

Parameter List

 'connectionevent'
 'statuscode'
 'description'

Remarks

The ConnectionStatus event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

DirList Event (IPWorksSSL_FTP Class)

This event is fired when a directory entry is received.

Object Oriented Interface

public function fireDirList($param);

Procedural Interface

ipworksssl_ftp_register_callback($res, 2, array($this, 'fireDirList'));

Parameter List

 'direntry'
 'filename'
 'isdir'
 'filesize'
 'filetime'

Remarks

The DirList events are fired when a directory listing is received as a response to a ListDirectory or ListDirectoryLong call.

The StartTransfer and EndTransfer events mark the beginning and end of the event stream.

The DirEntry parameter contains the filename when ListDirectory is called and includes extended file information when ListDirectoryLong is called.

The class tries to fill out the FileName, IsDir, FileSize, and FileTime parameters when calling the ListDirectoryLong method. Except for FileName, these parameters are empty when a short "List Directory" is performed.

In Unix systems, the date is given in two types of formats: If the date is in the past 12 months the exact time is specified and the year is omitted. Otherwise, only the date and the year, but not hours or minutes, are given.

EndTransfer Event (IPWorksSSL_FTP Class)

This event is fired when a file finishes downloading or uploading.

Object Oriented Interface

public function fireEndTransfer($param);

Procedural Interface

ipworksssl_ftp_register_callback($res, 3, array($this, 'fireEndTransfer'));

Parameter List

 'direction'

Remarks

The EndTransfer event fires when a Data Interface connection is closed. This occurs when the file finishes transferring or a directory listing is finished.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Error Event (IPWorksSSL_FTP Class)

Information about errors during data delivery.

Object Oriented Interface

public function fireError($param);

Procedural Interface

ipworksssl_ftp_register_callback($res, 4, array($this, 'fireError'));

Parameter List

 'errorcode'
 'description'

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class fails with an error.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

PITrail Event (IPWorksSSL_FTP Class)

This event traces the commands sent to the server, and the respective replies.

Object Oriented Interface

public function firePITrail($param);

Procedural Interface

ipworksssl_ftp_register_callback($res, 5, array($this, 'firePITrail'));

Parameter List

 'direction'
 'message'

Remarks

The PITrail event is useful for debugging purposes. It shows all of the interactions between the client and the server, line by line.

The Message parameter contains the full text of the message. The Direction parameter shows the originator of the message:

SSLServerAuthentication Event (IPWorksSSL_FTP Class)

Fired after the server presents its certificate to the client.

Object Oriented Interface

public function fireSSLServerAuthentication($param);

Procedural Interface

ipworksssl_ftp_register_callback($res, 6, array($this, 'fireSSLServerAuthentication'));

Parameter List

 'certencoded'
 'certsubject'
 'certissuer'
 'status'
 'accept'

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (IPWorksSSL_FTP Class)

Shows the progress of the secure connection.

Object Oriented Interface

public function fireSSLStatus($param);

Procedural Interface

ipworksssl_ftp_register_callback($res, 7, array($this, 'fireSSLStatus'));

Parameter List

 'message'

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

StartTransfer Event (IPWorksSSL_FTP Class)

This event fires when a file starts downloading or uploading.

Object Oriented Interface

public function fireStartTransfer($param);

Procedural Interface

ipworksssl_ftp_register_callback($res, 8, array($this, 'fireStartTransfer'));

Parameter List

 'direction'

Remarks

The StartTransfer event fires when a Data Interface connection is created. This is when the file starts transferring or a directory listing is started.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Transfer Event (IPWorksSSL_FTP Class)

This event is fired during the file download or upload.

Object Oriented Interface

public function fireTransfer($param);

Procedural Interface

ipworksssl_ftp_register_callback($res, 9, array($this, 'fireTransfer'));

Parameter List

 'direction'
 'bytestransferred'
 'percentdone'
 'text'

Remarks

One or more Transfer events are fired during file transfer. The BytesTransferred parameter shows the number of bytes transferred since the beginning of the transfer.

Text contains the portion of the file data being delivered.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Config Settings (FTP Class)

FTP Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Socket Config Settings

Base Config Settings

Trappable Errors (FTP Class)

FTP Errors

The class may also return one of the following error codes, which are inherited from other classes.

SSLClient Errors

SSL Errors

TCP/IP Errors