WebUpload Class

Properties   Methods   Events   Config Settings   Errors  

The WebUpload Class is used to upload files to RFC1867-compliant web servers.

Syntax

class ipworksssl.WebUpload

Remarks

The WebUpload Class supports both plaintext and SSL/TLS connections. When connecting over SSL/TLS the on_ssl_server_authentication event allows you to check the server identity and other security attributes. The on_ssl_status event provides information about the SSL handshake. Additional SSL related settings are also supported via the config method.

To use the class as a file upload client, provide the file names (paths) in the file_vars properties and optional form variables in the form_vars properties.

Then, set the url property to the address of the page or script that accepts the files, and call the upload method. Alternatively you can call the upload_to method with URL as a parameter.

The on_upload_progress event is fired during upload which shows the progress of the upload. The on_transfer event shows the server response (normally an HTML page).

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.

accept Property

This property includes a list of acceptable MIME types for the request.

Syntax

def get_accept() -> str: ...
def set_accept(value: str) -> None: ...

accept = property(get_accept, set_accept)

Default Value

""

Remarks

If this property contains a nonempty string, an HTTP Accept header is added to the request.

The Accept header is used for content negotiation. It provides the server with a comma-separated list of MIME types that are acceptable for its response.

authorization Property

This property includes the Authorization string to be sent to the server.

Syntax

def get_authorization() -> str: ...
def set_authorization(value: str) -> None: ...

authorization = property(get_authorization, set_authorization)

Default Value

""

Remarks

If the authorization property contains a nonempty string, an Authorization HTTP request header is added to the request. This header conveys Authorization information to the server.

A common use for this property is to specify OAuth authorization string.

This property is provided so that the HTTP class can be extended with other security schemes in addition to the authorization schemes already implemented by the class.

The auth_scheme property defines the authentication scheme used. In the case of HTTP Basic Authentication (default), every time user and password are set, they are Base64 encoded, and the result is put in the authorization property in the form "Basic [encoded-user-password]".

auth_scheme Property

The authentication scheme to use when server authentication is required.

Syntax

def get_auth_scheme() -> int: ...
def set_auth_scheme(value: int) -> None: ...

auth_scheme = property(get_auth_scheme, set_auth_scheme)

Default Value

0

Remarks

This property will tell the class which type of authorization to perform when the user and password properties are set.

This property should be set to authNone (3) when no authentication is to be performed.

By default, this property is authBasic (0), and if the user and password properties are set, the class will attempt HTTP Basic Authentication. If auth_scheme is set to authDigest (1), authNtlm (4), or authNegotiate (5), then Digest, NTLM, or Windows Negotiate (Kerberos) authentication will be attempted instead.

If auth_scheme is set to authProprietary (2), then the authorization token must be supplied through the authorization property.

If auth_scheme is set to authOAuth (6), then the authorization string must be supplied through the authorization property.

Note: If you set the authorization property and auth_scheme is not authProprietary or authOAuth, then the auth_scheme will be set automatically to authProprietary (2) by the class.

For security, changing the value of this property will cause the class to clear the values of user, password, and Authorization.

connected Property

This shows whether the class is connected.

Syntax

def get_connected() -> bool: ...
def set_connected(value: bool) -> None: ...

connected = property(get_connected, set_connected)

Default Value

FALSE

Remarks

This property is used to determine whether or not the class is connected to the remote host.

Note: It is recommended to use the connect or disconnect method instead of setting this property.

content_type Property

This property includes the content type for posts and puts.

Syntax

def get_content_type() -> str: ...
def set_content_type(value: str) -> None: ...

content_type = property(get_content_type, set_content_type)

Default Value

""

Remarks

If this property contains a nonempty string, a Content-Type HTTP request header is added to the request. The purpose of the header is to show the contents of the data during a post or put to the server.

The most common example is posting of HTML form input data. In that case, this property must be set to "application/x-www-form-urlencoded".

cookie_count Property

The number of records in the Cookie arrays.

Syntax

def get_cookie_count() -> int: ...
def set_cookie_count(value: int) -> None: ...

cookie_count = property(get_cookie_count, set_cookie_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

• cookie_domain
• cookie_expiration
• cookie_name
• cookie_path
• cookie_secure
• cookie_value

The array indices start at 0 and end at cookie_count - 1.

cookie_domain Property

This is the domain of a received cookie.

Syntax

def get_cookie_domain(cookie_index: int) -> str: ...

Default Value

""

Remarks

This is the domain of a received cookie. This property contains a domain name to limit the cookie to (if provided by the server). If the server does not provide a domain name, this property will contain an empty string. The convention in this case is to use the server name specified by url_server as the cookie domain.

The cookie_index parameter specifies the index of the item in the array. The size of the array is controlled by the cookie_count property.

This property is read-only.

cookie_expiration Property

This property contains an expiration time for the cookie (if provided by the server).

Syntax

def get_cookie_expiration(cookie_index: int) -> str: ...

Default Value

""

Remarks

This property contains an expiration time for the cookie (if provided by the server). The time format used is "Weekday, DD-Mon-YY HH:MM:SS GMT". If the server does not provide an expiration time, this property will contain an empty string. The convention is to drop the cookie at the end of the session.

The cookie_index parameter specifies the index of the item in the array. The size of the array is controlled by the cookie_count property.

This property is read-only.

cookie_name Property

This property, contains the name of the cookie.

Syntax

def get_cookie_name(cookie_index: int) -> str: ...
def set_cookie_name(cookie_index: int, value: str) -> None: ...

Default Value

""

Remarks

This property, contains the name of the cookie.

This property, along with cookie_value, stores the cookie that is to be sent to the server. The on_set_cookie event displays the cookies sent by the server and their properties.

The cookie_index parameter specifies the index of the item in the array. The size of the array is controlled by the cookie_count property.

cookie_path Property

This property contains a path name to limit the cookie to (if provided by the server).

Syntax

def get_cookie_path(cookie_index: int) -> str: ...

Default Value

""

Remarks

This property contains a path name to limit the cookie to (if provided by the server). If the server does not provide a cookie path, the path property will be an empty string. The convention in this case is to use the path specified by url_path as the cookie path.

The cookie_index parameter specifies the index of the item in the array. The size of the array is controlled by the cookie_count property.

This property is read-only.

cookie_secure Property

This property contains the security flag of the received cookie.

Syntax

def get_cookie_secure(cookie_index: int) -> bool: ...

Default Value

FALSE

Remarks

This property contains the security flag of the received cookie. This property specifies whether the cookie is secure. If the value of this property is True, the cookie value must be submitted only through a secure (HTTPS) connection.

The cookie_index parameter specifies the index of the item in the array. The size of the array is controlled by the cookie_count property.

This property is read-only.

cookie_value Property

This property contains the value of the cookie.

Syntax

def get_cookie_value(cookie_index: int) -> str: ...
def set_cookie_value(cookie_index: int, value: str) -> None: ...

Default Value

""

Remarks

This property contains the value of the cookie. A corresponding value is associated with the cookie specified by cookie_name. This property holds that value.

The on_set_cookie event provides the cookies set by the server.

The cookie_index parameter specifies the index of the item in the array. The size of the array is controlled by the cookie_count property.

file_count Property

The number of records in the FileVar arrays.

Syntax

def get_file_count() -> int: ...
def set_file_count(value: int) -> None: ...

file_count = property(get_file_count, set_file_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

• file_var_content_type
• file_var_file
• file_var_input_data
• file_var_name

The array indices start at 0 and end at file_count - 1.

file_var_content_type Property

This property contains the value of the Content Type of each form variable that corresponds to the file in the File property.

Syntax

def get_file_var_content_type(file_index: int) -> str: ...
def set_file_var_content_type(file_index: int, value: str) -> None: ...

Default Value

""

Remarks

This property contains the value of the Content Type of each form variable that corresponds to the file in the file_var_file property.

The file_index parameter specifies the index of the item in the array. The size of the array is controlled by the file_count property.

file_var_file Property

This property contains the path and filename of each file to be sent.

Syntax

def get_file_var_file(file_index: int) -> str: ...
def set_file_var_file(file_index: int, value: str) -> None: ...

Default Value

""

Remarks

This property contains the path and filename of each file to be sent.

When the class is used as an upload client, this property must point to a valid filename that will be sent to the server.

If file_var_input_data is set, this property instead may be set to the desired filename, which will be used in the request.

The file_index parameter specifies the index of the item in the array. The size of the array is controlled by the file_count property.

file_var_input_data Property

This property specifies the file data to be sent.

Syntax

def set_file_var_input_data(file_index: int, value: bytes) -> None: ...

Default Value

""

Remarks

This property specifies the file data to be sent.

This property may be set to the file data instead of specifying a file from disk.

The file_index parameter specifies the index of the item in the array. The size of the array is controlled by the file_count property.

This property is write-only.

file_var_name Property

This property contains the name of each form variable that corresponds to the file in the File property.

Syntax

def get_file_var_name(file_index: int) -> str: ...
def set_file_var_name(file_index: int, value: str) -> None: ...

Default Value

""

Remarks

This property contains the name of each form variable that corresponds to the file in the file_var_file property.

The file_index parameter specifies the index of the item in the array. The size of the array is controlled by the file_count property.

firewall_auto_detect Property

This property tells the class whether or not to automatically detect and use firewall system settings, if available.

Syntax

def get_firewall_auto_detect() -> bool: ...
def set_firewall_auto_detect(value: bool) -> None: ...

firewall_auto_detect = property(get_firewall_auto_detect, set_firewall_auto_detect)

Default Value

FALSE

Remarks

This property tells the class whether or not to automatically detect and use firewall system settings, if available.

firewall_type Property

This property determines the type of firewall to connect through.

Syntax

def get_firewall_type() -> int: ...
def set_firewall_type(value: int) -> None: ...

firewall_type = property(get_firewall_type, set_firewall_type)

Default Value

0

Remarks

This property determines the type of firewall to connect through. The applicable values are as follows:

firewall_host Property

This property contains the name or IP address of firewall (optional).

Syntax

def get_firewall_host() -> str: ...
def set_firewall_host(value: str) -> None: ...

firewall_host = property(get_firewall_host, set_firewall_host)

Default Value

""

Remarks

This property contains the name or IP address of firewall (optional). If a firewall_host is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the class fails with an error.

firewall_password Property

This property contains a password if authentication is to be used when connecting through the firewall.

Syntax

def get_firewall_password() -> str: ...
def set_firewall_password(value: str) -> None: ...

firewall_password = property(get_firewall_password, set_firewall_password)

Default Value

""

Remarks

This property contains a password if authentication is to be used when connecting through the firewall. If firewall_host is specified, the firewall_user and firewall_password properties are used to connect and authenticate to the given firewall. If the authentication fails, the class fails with an error.

firewall_port Property

This property contains the transmission control protocol (TCP) port for the firewall Host .

Syntax

def get_firewall_port() -> int: ...
def set_firewall_port(value: int) -> None: ...

firewall_port = property(get_firewall_port, set_firewall_port)

Default Value

0

Remarks

This property contains the transmission control protocol (TCP) port for the firewall firewall_host. See the description of the firewall_host property for details.

Note: This property is set automatically when firewall_type is set to a valid value. See the description of the firewall_type property for details.

firewall_user Property

This property contains a user name if authentication is to be used connecting through a firewall.

Syntax

def get_firewall_user() -> str: ...
def set_firewall_user(value: str) -> None: ...

firewall_user = property(get_firewall_user, set_firewall_user)

Default Value

""

Remarks

This property contains a user name if authentication is to be used connecting through a firewall. If the firewall_host is specified, this property and firewall_password properties are used to connect and authenticate to the given firewall. If the authentication fails, the class fails with an error.

follow_redirects Property

This property determines what happens when the server issues a redirect.

Syntax

def get_follow_redirects() -> int: ...
def set_follow_redirects(value: int) -> None: ...

follow_redirects = property(get_follow_redirects, set_follow_redirects)

Default Value

0

Remarks

This property determines what happens when the server issues a redirect. Normally, the class returns an error if the server responds with an "Object Moved" message. If this property is set to frAlways (1), the new url for the object is retrieved automatically every time.

If this property is set to frSameScheme (2), the new url is retrieved automatically only if the url_scheme is the same; otherwise, the class fails with an error.

Note: Following the HTTP specification, unless this property is set to frAlways (1), automatic redirects will be performed only for GET or HEAD requests. Other methods potentially could change the conditions of the initial request and create security vulnerabilities.

Furthermore, if either the new URL server or port are different from the existing one, user and password are also reset to empty. If, however, this property is set to frAlways (1), the same credentials are used to connect to the new server.

A on_redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the on_redirect event is a good place to set properties related to the new connection (e.g., new authentication parameters).

The default value is frNever (0). In this case, redirects are never followed, and the class fails with an error instead.

form_var_count Property

The number of records in the FormVar arrays.

Syntax

def get_form_var_count() -> int: ...
def set_form_var_count(value: int) -> None: ...

form_var_count = property(get_form_var_count, set_form_var_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

• form_var_content_type
• form_var_name
• form_var_value

The array indices start at 0 and end at form_var_count - 1.

form_var_content_type Property

This property specifies the Content-Type header for a form variable.

Syntax

def get_form_var_content_type(var_index: int) -> str: ...
def set_form_var_content_type(var_index: int, value: str) -> None: ...

Default Value

""

Remarks

This property specifies the Content-Type header for a form variable.

When a form variable is added to the class, the Content-Type header for the form variable can be controlled by this property. To omit the Content-Type header completely for a form variable, set this to an empty string.

The default value is "text/plain".

The var_index parameter specifies the index of the item in the array. The size of the array is controlled by the form_var_count property.

form_var_name Property

This property contains the form variable name for the current request.

Syntax

def get_form_var_name(var_index: int) -> str: ...
def set_form_var_name(var_index: int, value: str) -> None: ...

Default Value

""

Remarks

This property contains the form variable name for the current request. If you are emulating the behavior of an existing HTML web form, this property will contain the name attribute of the INPUT tag in the form that you are emulating.

The var_index parameter specifies the index of the item in the array. The size of the array is controlled by the form_var_count property.

form_var_value Property

This property contains the form variable value for the current request.

Syntax

def get_form_var_value(var_index: int) -> str: ...
def set_form_var_value(var_index: int, value: str) -> None: ...

Default Value

""

Remarks

This property contains the form variable value for the current request.

The var_index parameter specifies the index of the item in the array. The size of the array is controlled by the form_var_count property.

from_ Property

This property includes the email address of the HTTP agent (optional).

Syntax

def get_from() -> str: ...
def set_from(value: str) -> None: ...

from_ = property(get_from, set_from)

Default Value

""

Remarks

This property contains the email address of the HTTP agent (optional). If it contains a nonempty string, an HTTP From: header is added to the request. This header generally gives the email address of the requester of the document.

idle Property

The current status of the class.

Syntax

def get_idle() -> bool: ...

idle = property(get_idle, None)

Default Value

TRUE

Remarks

idle will be False if the component is currently busy (communicating and/or waiting for an answer), and True at all other times.

This property is read-only.

local_file Property

This property includes the path to a local file for downloading. If the file exists, it is overwritten.

Syntax

def get_local_file() -> str: ...
def set_local_file(value: str) -> None: ...

local_file = property(get_local_file, set_local_file)

Default Value

""

Remarks

This property is used when getting a document.

If this property is empty, then the received data are provided through transferred_data and the on_transfer event.

local_host Property

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

def get_local_host() -> str: ...
def set_local_host(value: str) -> None: ...

local_host = property(get_local_host, set_local_host)

Default Value

""

Remarks

The local_host property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the local_host property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

NOTE: local_host is not persistent. You must always set it in code, and never in the property window.

other_headers Property

This property includes other headers as determined by the user (optional).

Syntax

def get_other_headers() -> str: ...
def set_other_headers(value: str) -> None: ...

other_headers = property(get_other_headers, set_other_headers)

Default Value

""

Remarks

This property can be set to a string of headers to be appended to the HTTP request headers created from other properties like content_type and from_.

The headers must follow the format Header: Value as described in the HTTP specifications. Header lines should be separated by CRLF ("\r\n") .

Use this property with caution. If this property contains invalid headers, HTTP requests may fail.

This property is useful for extending the functionality of the class beyond what is provided.

parsed_header_count Property

The number of records in the ParsedHeader arrays.

Syntax

def get_parsed_header_count() -> int: ...

parsed_header_count = property(get_parsed_header_count, None)

Default Value

0

Remarks

This property controls the size of the following arrays:

• parsed_header_field
• parsed_header_value

The array indices start at 0 and end at parsed_header_count - 1.

This property is read-only.

parsed_header_field Property

This property contains the name of the HTTP header (this is the same case as it is delivered).

Syntax

def get_parsed_header_field(parsed_header_index: int) -> str: ...

Default Value

""

Remarks

This property contains the name of the HTTP Header (this is the same case as it is delivered).

The parsed_header_index parameter specifies the index of the item in the array. The size of the array is controlled by the parsed_header_count property.

This property is read-only.

parsed_header_value Property

This property contains the header contents.

Syntax

def get_parsed_header_value(parsed_header_index: int) -> str: ...

Default Value

""

Remarks

This property contains the Header contents.

The parsed_header_index parameter specifies the index of the item in the array. The size of the array is controlled by the parsed_header_count property.

This property is read-only.

password Property

This property includes a password if authentication is to be used.

Syntax

def get_password() -> str: ...
def set_password(value: str) -> None: ...

password = property(get_password, set_password)

Default Value

""

Remarks

This property contains a password if authentication is to be used. If auth_scheme is set to HTTP Basic Authentication, the user and password are Base64 encoded and the result is put in the Authorization configuration setting in the form "Basic [encoded-user-password]".

If auth_scheme is set to HTTP Digest Authentication, the user and password properties are used to respond to the HTTP Digest Authentication challenge from the server.

If auth_scheme is set to NTLM, NTLM authentication will be attempted. If auth_scheme is set to NTLM and user and password are empty, the class will attempt to authenticate using the current user's credentials.

proxy_auth_scheme Property

This property is used to tell the class which type of authorization to perform when connecting to the proxy.

Syntax

def get_proxy_auth_scheme() -> int: ...
def set_proxy_auth_scheme(value: int) -> None: ...

proxy_auth_scheme = property(get_proxy_auth_scheme, set_proxy_auth_scheme)

Default Value

0

Remarks

This property is used to tell the class which type of authorization to perform when connecting to the proxy. This is used only when the proxy_user and proxy_password properties are set.

proxy_auth_scheme should be set to authNone (3) when no authentication is expected.

By default, proxy_auth_scheme is authBasic (0), and if the proxy_user and proxy_password properties are set, the component will attempt basic authentication.

If proxy_auth_scheme is set to authDigest (1), digest authentication will be attempted instead.

If proxy_auth_scheme is set to authProprietary (2), then the authorization token will not be generated by the class. Look at the configuration file for the class being used to find more information about manually setting this token.

If proxy_auth_scheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of proxy_user and proxy_password.

proxy_auto_detect Property

This property tells the class whether or not to automatically detect and use proxy system settings, if available.

Syntax

def get_proxy_auto_detect() -> bool: ...
def set_proxy_auto_detect(value: bool) -> None: ...

proxy_auto_detect = property(get_proxy_auto_detect, set_proxy_auto_detect)

Default Value

FALSE

Remarks

This property tells the class whether or not to automatically detect and use proxy system settings, if available. The default value is False.

proxy_password Property

This property contains a password if authentication is to be used for the proxy.

Syntax

def get_proxy_password() -> str: ...
def set_proxy_password(value: str) -> None: ...

proxy_password = property(get_proxy_password, set_proxy_password)

Default Value

""

Remarks

This property contains a password if authentication is to be used for the proxy.

If proxy_auth_scheme is set to Basic Authentication, the proxy_user and proxy_password are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If proxy_auth_scheme is set to Digest Authentication, the proxy_user and proxy_password properties are used to respond to the Digest Authentication challenge from the server.

If proxy_auth_scheme is set to NTLM Authentication, the proxy_user and proxy_password properties are used to authenticate through NTLM negotiation.

proxy_port Property

This property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).

Syntax

def get_proxy_port() -> int: ...
def set_proxy_port(value: int) -> None: ...

proxy_port = property(get_proxy_port, set_proxy_port)

Default Value

80

Remarks

This property contains the Transmission Control Protocol (TCP) port for the proxy proxy_server (default 80). See the description of the proxy_server property for details.

proxy_server Property

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

Syntax

def get_proxy_server() -> str: ...
def set_proxy_server(value: str) -> None: ...

proxy_server = property(get_proxy_server, set_proxy_server)

Default Value

""

Remarks

If a proxy proxy_server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the proxy_server property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the proxy_server property is set to the corresponding address. If the search is not successful, an error is returned.

proxy_ssl Property

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.

Syntax

def get_proxy_ssl() -> int: ...
def set_proxy_ssl(value: int) -> None: ...

proxy_ssl = property(get_proxy_ssl, set_proxy_ssl)

Default Value

0

Remarks

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

proxy_user Property

This property contains a user name, if authentication is to be used for the proxy.

Syntax

def get_proxy_user() -> str: ...
def set_proxy_user(value: str) -> None: ...

proxy_user = property(get_proxy_user, set_proxy_user)

Default Value

""

Remarks

This property contains a username if authentication is to be used for the proxy.

If proxy_auth_scheme is set to Basic Authentication, the proxy_user and proxy_password properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If proxy_auth_scheme is set to Digest Authentication, the proxy_user and proxy_password properties are used to respond to the Digest Authentication challenge from the server.

If proxy_auth_scheme is set to NTLM Authentication, the proxy_user and proxy_password properties are used to authenticate through NTLM negotiation.

referer Property

This property includes the referer URL/document (optional).

Syntax

def get_referer() -> str: ...
def set_referer(value: str) -> None: ...

referer = property(get_referer, set_referer)

Default Value

""

Remarks

If this property contains a nonempty string, a Referer HTTP request header is added to the request. The purpose of the header is to show the document referring the requested URL.

ssl_accept_server_cert_encoded Property

This is the certificate (PEM/base64 encoded).

Syntax

def get_ssl_accept_server_cert_encoded() -> bytes: ...
def set_ssl_accept_server_cert_encoded(value: bytes) -> None: ...

ssl_accept_server_cert_encoded = property(get_ssl_accept_server_cert_encoded, set_ssl_accept_server_cert_encoded)

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The ssl_accept_server_cert_store and ssl_accept_server_cert_subject properties also may be used to specify a certificate.

When ssl_accept_server_cert_encoded is set, a search is initiated in the current ssl_accept_server_cert_store for the private key of the certificate. If the key is found, ssl_accept_server_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, ssl_accept_server_cert_subject is set to an empty string.

ssl_cert_encoded Property

This is the certificate (PEM/base64 encoded).

Syntax

def get_ssl_cert_encoded() -> bytes: ...
def set_ssl_cert_encoded(value: bytes) -> None: ...

ssl_cert_encoded = property(get_ssl_cert_encoded, set_ssl_cert_encoded)

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The ssl_cert_store and ssl_cert_subject properties also may be used to specify a certificate.

When ssl_cert_encoded is set, a search is initiated in the current ssl_cert_store for the private key of the certificate. If the key is found, ssl_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, ssl_cert_subject is set to an empty string.

ssl_cert_store Property

This is the name of the certificate store for the client certificate.

Syntax

def get_ssl_cert_store() -> bytes: ...
def set_ssl_cert_store(value: bytes) -> None: ...

ssl_cert_store = property(get_ssl_cert_store, set_ssl_cert_store)

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The ssl_cert_store_type property denotes the type of the certificate store specified by ssl_cert_store. If the store is password protected, specify the password in ssl_cert_store_password.

ssl_cert_store is used in conjunction with the ssl_cert_subject property to specify client certificates. If ssl_cert_store has a value, and ssl_cert_subject or ssl_cert_encoded is set, a search for a certificate is initiated. Please see the ssl_cert_subject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

ssl_cert_store_password Property

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

def get_ssl_cert_store_password() -> str: ...
def set_ssl_cert_store_password(value: str) -> None: ...

ssl_cert_store_password = property(get_ssl_cert_store_password, set_ssl_cert_store_password)

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

ssl_cert_store_type Property

This is the type of certificate store for this certificate.

Syntax

def get_ssl_cert_store_type() -> int: ...
def set_ssl_cert_store_type(value: int) -> None: ...

ssl_cert_store_type = property(get_ssl_cert_store_type, set_ssl_cert_store_type)

Default Value

0

Remarks

This is the type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:

ssl_cert_subject Property

This is the subject of the certificate used for client authentication.

Syntax

def get_ssl_cert_subject() -> str: ...
def set_ssl_cert_subject(value: str) -> None: ...

ssl_cert_subject = property(get_ssl_cert_subject, set_ssl_cert_subject)

Default Value

""

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

ssl_provider Property

This specifies the SSL/TLS implementation to use.

Syntax

def get_ssl_provider() -> int: ...
def set_ssl_provider(value: int) -> None: ...

ssl_provider = property(get_ssl_provider, set_ssl_provider)

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected, on Windows the class will use the platform implementation. On Linux/macOS the class will use the internal implementation. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used on all platforms.

ssl_server_cert_encoded Property

This is the certificate (PEM/base64 encoded).

Syntax

def get_ssl_server_cert_encoded() -> bytes: ...

ssl_server_cert_encoded = property(get_ssl_server_cert_encoded, None)

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The ssl_server_cert_store and ssl_server_cert_subject properties also may be used to specify a certificate.

When ssl_server_cert_encoded is set, a search is initiated in the current ssl_server_cert_store for the private key of the certificate. If the key is found, ssl_server_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, ssl_server_cert_subject is set to an empty string.

This property is read-only.

status_line Property

This property is the first line of the last server response.

Syntax

def get_status_line() -> str: ...

status_line = property(get_status_line, None)

Default Value

""

Remarks

This property contains the first line of the last server response. This value can be used for diagnostic purposes. If an HTTP error is returned when calling a method of the class, the error string is the same as the status_line property.

The HTTP protocol specifies the structure of the status_line as follows: [HTTP version] [Result Code] [Description].

This property is read-only.

timeout Property

A timeout for the class.

Syntax

def get_timeout() -> int: ...
def set_timeout(value: int) -> None: ...

timeout = property(get_timeout, set_timeout)

Default Value

60

Remarks

If the timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If timeout is set to a positive value, the class will wait for the operation to complete before returning control.

The class will use do_events to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If timeout expires, and the operation is not yet complete, the class fails with an error.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by timeout seconds when any amount of data is successfully sent or received.

The default value for the timeout property is 60 seconds.

transferred_data Property

This property includes the contents of the last response from the server.

Syntax

def get_transferred_data() -> bytes: ...

transferred_data = property(get_transferred_data, None)

Default Value

""

Remarks

This property contains the contents of the last response from the server. If the local_file is empty, the data are accumulated in transferred_data and also can be received in the on_transfer event. Otherwise, this property returns an empty string.

transferred_data_limit controls the maximum amount of data accumulated in transferred_data (by default there is no limit).

This property is read-only.

transferred_data_limit Property

This property specifies the the maximum amount of data to be transferred.

Syntax

def get_transferred_data_limit() -> int: ...
def set_transferred_data_limit(value: int) -> None: ...

transferred_data_limit = property(get_transferred_data_limit, set_transferred_data_limit)

Default Value

0

Remarks

This property contains the maximum amount of data to be transferred. The default value is 0, which will not impose any limits on the amount of data accumulated in the transferred_data property.

transferred_headers Property

This property includes the full set of headers as received from the server.

Syntax

def get_transferred_headers() -> str: ...

transferred_headers = property(get_transferred_headers, None)

Default Value

""

Remarks

This property returns the complete set of raw headers as received from the server.

The on_header event shows the individual headers as parsed by the class.

This property is read-only.

url Property

The URL to post information to.

Syntax

def get_url() -> str: ...
def set_url(value: str) -> None: ...

url = property(get_url, set_url)

Default Value

""

Remarks

This property specifies the web page to post the files and form data to. It is the same as the value specified by '<FORM ACTION=...>' in HTML forms.

This property must be set before calling the upload method.

user Property

This property includes a user name if authentication is to be used.

Syntax

def get_user() -> str: ...
def set_user(value: str) -> None: ...

user = property(get_user, set_user)

Default Value

""

Remarks

This property contains a user name if authentication is to be used. If auth_scheme is set to HTTP Basic Authentication, The user and password are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]".

If auth_scheme is set to HTTP Digest Authentication, the user and password properties are used to respond to the HTTP Digest Authentication challenge from the server.

If auth_scheme is set to NTLM, NTLM authentication will be attempted. If auth_scheme is set to NTLM, and user and password are empty, the class will attempt to authenticate using the current user's credentials.

add_cookie Method

This method adds a cookie and the corresponding value to the outgoing request headers.

Syntax

def add_cookie(cookie_name: str, cookie_value: str) -> None: ...

Remarks

This property adds a cookie and the corresponding value to the outgoing request headers. Please refer to the cookies property for more information on cookies and how they are managed.

add_file_var Method

Adds a file variable and the corresponding file name.

Syntax

def add_file_var(file_var: str, file_name: str) -> None: ...

Remarks

Please refer to the file_vars properties for more information on file variables and how they are managed.

add_form_var Method

Adds a form variable and the corresponding value.

Syntax

def add_form_var(var_name: str, var_value: str) -> None: ...

Remarks

Please refer to form_vars and file_vars for more information on form and file variables and how they are managed.

Example (Submit Post)

WebUploadControl.Reset() WebUploadControl.AddFormVar("formvarname1", "formvarvalue1") WebUploadControl.AddFileVar("filename1", "c:\filename1.txt") WebUploadControl.Upload() Example (Submit Post using FormVar Arrays) WebUploadControl.Reset() WebUploadControl.FormVarCount = 1 WebUploadControl.FormVarName(0) = "formvarname1" WebUploadControl.FormVarValue(0) = "formvarvalue1" WebUploadControl.FileVarCount = 1 WebUploadControl.FileVarName(0) = "filename1" WebUploadControl.FileVarValue(0) = "C:\filename1.txt" WebUploadControl.UploadTo(url)

config Method

Sets or retrieves a configuration setting.

Syntax

def config(configuration_string: str) -> str: ...

Remarks

config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

do_events Method

Processes events from the internal message queue.

Syntax

def do_events() -> None: ...

Remarks

When do_events is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.

interrupt Method

Interrupt the current method.

Syntax

def interrupt() -> None: ...

Remarks

If there is no method in progress, interrupt simply returns, doing nothing.

reset Method

Reset the class.

Syntax

def reset() -> None: ...

Remarks

Calling reset sets all HTTP headers to their default values and clears all form variables and file names.

upload Method

Posts data to the URL specified by URL .

Syntax

def upload() -> None: ...

Remarks

Sends a post request to the url with the variables and files provided in the file_vars properties. Please refer to form_vars and file_vars for more information on form and file variables and how they are managed.

Example (Submit Post)

WebUploadControl.Reset() WebUploadControl.AddFormVar("formvarname1", "formvarvalue1") WebUploadControl.AddFileVar("filename1", "c:\filename1.txt") WebUploadControl.Upload() Example (Submit Post using FormVar Arrays) WebUploadControl.Reset() WebUploadControl.FormVarCount = 1 WebUploadControl.FormVarName(0) = "formvarname1" WebUploadControl.FormVarValue(0) = "formvarvalue1" WebUploadControl.FileVarCount = 1 WebUploadControl.FileVarName(0) = "filename1" WebUploadControl.FileVarValue(0) = "C:\filename1.txt" WebUploadControl.UploadTo(url)

upload_to Method

Posts data to the URL specified by the 'URL' parameter.

Syntax

def upload_to(url: str) -> None: ...

Remarks

Sends a post request to 'URL' with the variables and files provided in the file_vars properties.

Calling this method is equivalent to setting the url property to URL and then calling upload. Please refer to form_vars and file_vars for more information on form and file variables and how they are managed.

Example (Submit Post)

WebUploadControl.Reset() WebUploadControl.AddFormVar("formvarname1", "formvarvalue1") WebUploadControl.AddFileVar("filename1", "c:\filename1.txt") WebUploadControl.Upload() Example (Submit Post using FormVar Arrays) WebUploadControl.Reset() WebUploadControl.FormVarCount = 1 WebUploadControl.FormVarName(0) = "formvarname1" WebUploadControl.FormVarValue(0) = "formvarvalue1" WebUploadControl.FileVarCount = 1 WebUploadControl.FileVarName(0) = "filename1" WebUploadControl.FileVarValue(0) = "C:\filename1.txt" WebUploadControl.UploadTo(url)

on_connected Event

This event is fired immediately after a connection completes (or fails).

Syntax

class WebUploadConnectedEventParams(object):
  @property
  def status_code() -> int: ...

  @property
  def description() -> str: ...

# In class WebUpload:
@property
def on_connected() -> Callable[[WebUploadConnectedEventParams], None]: ...
@on_connected.setter
def on_connected(event_hook: Callable[[WebUploadConnectedEventParams], None]) -> None: ...

Remarks

If the connection is made normally, StatusCode is 0 and Description is "OK".

If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

Please refer to the Error Codes section for more information.

on_connection_status Event

This event is fired to indicate changes in the connection state.

Syntax

class WebUploadConnectionStatusEventParams(object):
  @property
  def connection_event() -> str: ...

  @property
  def status_code() -> int: ...

  @property
  def description() -> str: ...

# In class WebUpload:
@property
def on_connection_status() -> Callable[[WebUploadConnectionStatusEventParams], None]: ...
@on_connection_status.setter
def on_connection_status(event_hook: Callable[[WebUploadConnectionStatusEventParams], None]) -> None: ...

Remarks

The on_connection_status event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

on_disconnected Event

This event is fired when a connection is closed.

Syntax

class WebUploadDisconnectedEventParams(object):
  @property
  def status_code() -> int: ...

  @property
  def description() -> str: ...

# In class WebUpload:
@property
def on_disconnected() -> Callable[[WebUploadDisconnectedEventParams], None]: ...
@on_disconnected.setter
def on_disconnected(event_hook: Callable[[WebUploadDisconnectedEventParams], None]) -> None: ...

Remarks

If the connection is broken normally, StatusCode is 0 and Description is "OK".

If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP/IP) subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error.

Please refer to the Error Codes section for more information.

on_end_transfer Event

Fired when a document finishes transferring.

Syntax

class WebUploadEndTransferEventParams(object):
  @property
  def direction() -> int: ...

# In class WebUpload:
@property
def on_end_transfer() -> Callable[[WebUploadEndTransferEventParams], None]: ...
@on_end_transfer.setter
def on_end_transfer(event_hook: Callable[[WebUploadEndTransferEventParams], None]) -> None: ...

Remarks

The on_end_transfer event is fired when the document text finishes transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

on_error Event

Information about errors during data delivery.

Syntax

class WebUploadErrorEventParams(object):
  @property
  def error_code() -> int: ...

  @property
  def description() -> str: ...

# In class WebUpload:
@property
def on_error() -> Callable[[WebUploadErrorEventParams], None]: ...
@on_error.setter
def on_error(event_hook: Callable[[WebUploadErrorEventParams], None]) -> None: ...

Remarks

The on_error event is fired in case of exceptional conditions during message processing. Normally the class fails with an error.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

on_header Event

This event is fired every time a header line comes in.

Syntax

class WebUploadHeaderEventParams(object):
  @property
  def field() -> str: ...

  @property
  def value() -> str: ...

# In class WebUpload:
@property
def on_header() -> Callable[[WebUploadHeaderEventParams], None]: ...
@on_header.setter
def on_header(event_hook: Callable[[WebUploadHeaderEventParams], None]) -> None: ...

Remarks

The Field parameter contains the name of the HTTP header (which is the same as it is delivered). The Value parameter contains the header contents.

If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).

on_log Event

This event fires once for each log message.

Syntax

class WebUploadLogEventParams(object):
  @property
  def log_level() -> int: ...

  @property
  def message() -> str: ...

  @property
  def log_type() -> str: ...

# In class WebUpload:
@property
def on_log() -> Callable[[WebUploadLogEventParams], None]: ...
@on_log.setter
def on_log(event_hook: Callable[[WebUploadLogEventParams], None]) -> None: ...

Remarks

This event fires once for each log message generated by the class. The verbosity is controlled by the LogLevel setting.

LogLevel indicates the level of message. Possible values are as follows:

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

Message is the log entry.

LogType identifies the type of log entry. Possible values are as follows:

• "Info"
• "RequestHeaders"
• "ResponseHeaders"
• "RequestBody"
• "ResponseBody"
• "ProxyRequest"
• "ProxyResponse"
• "FirewallRequest"
• "FirewallResponse"

on_redirect Event

This event is fired when a redirection is received from the server.

Syntax

class WebUploadRedirectEventParams(object):
  @property
  def location() -> str: ...

  @property
  def accept() -> bool: ...
  @accept.setter
  def accept(value) -> None: ...

# In class WebUpload:
@property
def on_redirect() -> Callable[[WebUploadRedirectEventParams], None]: ...
@on_redirect.setter
def on_redirect(event_hook: Callable[[WebUploadRedirectEventParams], None]) -> None: ...

Remarks

This event is fired in cases in which the client can decide whether or not to continue with the redirection process. The Accept parameter is always True by default, but if you do not want to follow the redirection, Accept may be set to False, in which case the class fails with an error. Location is the location to which the client is being redirected. Further control over redirection is provided in the follow_redirects property.

on_set_cookie Event

This event is fired for every cookie set by the server.

Syntax

class WebUploadSetCookieEventParams(object):
  @property
  def name() -> str: ...

  @property
  def value() -> str: ...

  @property
  def expires() -> str: ...

  @property
  def domain() -> str: ...

  @property
  def path() -> str: ...

  @property
  def secure() -> bool: ...

# In class WebUpload:
@property
def on_set_cookie() -> Callable[[WebUploadSetCookieEventParams], None]: ...
@on_set_cookie.setter
def on_set_cookie(event_hook: Callable[[WebUploadSetCookieEventParams], None]) -> None: ...

Remarks

The on_set_cookie event is fired for every Set-Cookie: header received from the HTTP server.

The Name parameter contains the name of the cookie, with the corresponding value supplied in the Value parameter.

The Expires parameter contains an expiration time for the cookie (if provided by the server). The time format used is "Weekday, DD-Mon-YY HH:MM:SS GMT". If the server does not provide an expiration time, the Expires parameter will be an empty string. In this case, the convention is to drop the cookie at the end of the session.

The Domain parameter contains a domain name to limit the cookie to (if provided by the server). If the server does not provide a domain name, the Domain parameter will be an empty string. The convention in this case is to use the server specified in the URL (url_server) as the cookie domain.

The Path parameter contains a path name to limit the cookie to (if provided by the server). If the server does not provide a cookie path, the Path parameter will be an empty string. The convention in this case is to use the path specified in the URL (url_path) as the cookie path.

The Secure parameter specifies whether the cookie is secure. If the value of this parameter is True, the cookie value must be submitted only through a secure (HTTPS) connection.

on_ssl_server_authentication Event

Fired after the server presents its certificate to the client.

Syntax

class WebUploadSSLServerAuthenticationEventParams(object):
  @property
  def cert_encoded() -> bytes: ...

  @property
  def cert_subject() -> str: ...

  @property
  def cert_issuer() -> str: ...

  @property
  def status() -> str: ...

  @property
  def accept() -> bool: ...
  @accept.setter
  def accept(value) -> None: ...

# In class WebUpload:
@property
def on_ssl_server_authentication() -> Callable[[WebUploadSSLServerAuthenticationEventParams], None]: ...
@on_ssl_server_authentication.setter
def on_ssl_server_authentication(event_hook: Callable[[WebUploadSSLServerAuthenticationEventParams], None]) -> None: ...

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

on_ssl_status Event

Shows the progress of the secure connection.

Syntax

class WebUploadSSLStatusEventParams(object):
  @property
  def message() -> str: ...

# In class WebUpload:
@property
def on_ssl_status() -> Callable[[WebUploadSSLStatusEventParams], None]: ...
@on_ssl_status.setter
def on_ssl_status(event_hook: Callable[[WebUploadSSLStatusEventParams], None]) -> None: ...

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

on_start_transfer Event

Fired when a document starts transferring (after the headers).

Syntax

class WebUploadStartTransferEventParams(object):
  @property
  def direction() -> int: ...

# In class WebUpload:
@property
def on_start_transfer() -> Callable[[WebUploadStartTransferEventParams], None]: ...
@on_start_transfer.setter
def on_start_transfer(event_hook: Callable[[WebUploadStartTransferEventParams], None]) -> None: ...

Remarks

The on_start_transfer event is fired when the document text starts transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

on_status Event

This event is fired when the HTTP status line is received from the server.

Syntax

class WebUploadStatusEventParams(object):
  @property
  def http_version() -> str: ...

  @property
  def status_code() -> int: ...

  @property
  def description() -> str: ...

# In class WebUpload:
@property
def on_status() -> Callable[[WebUploadStatusEventParams], None]: ...
@on_status.setter
def on_status(event_hook: Callable[[WebUploadStatusEventParams], None]) -> None: ...

Remarks

HTTPVersion is a string containing the HTTP version string as returned from the server (e.g., "1.1").

StatusCode contains the HTTP status code (e.g., 200), and Description the associated message returned by the server (e.g., "OK").

on_transfer Event

This event is fired while a document transfers (delivers document).

Syntax

class WebUploadTransferEventParams(object):
  @property
  def direction() -> int: ...

  @property
  def bytes_transferred() -> int: ...

  @property
  def percent_done() -> int: ...

  @property
  def text() -> bytes: ...

# In class WebUpload:
@property
def on_transfer() -> Callable[[WebUploadTransferEventParams], None]: ...
@on_transfer.setter
def on_transfer(event_hook: Callable[[WebUploadTransferEventParams], None]) -> None: ...

Remarks

The Text parameter contains the portion of the document text being received. It is empty if data are being posted to the server.

The BytesTransferred parameter contains the number of bytes transferred in this Direction since the beginning of the document text (excluding HTTP response headers).

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

on_upload_progress Event

Fired while the class is uploading files to the URL .

Syntax

class WebUploadUploadProgressEventParams(object):
  @property
  def percent_done() -> int: ...

# In class WebUpload:
@property
def on_upload_progress() -> Callable[[WebUploadUploadProgressEventParams], None]: ...
@on_upload_progress.setter
def on_upload_progress(event_hook: Callable[[WebUploadUploadProgressEventParams], None]) -> None: ...

Remarks

The PercentDone parameter shows the progress of the upload. The event is fired at least once at the beginning of the transfer, and once at the end of the transfer. The respective values for PercentDone are 0 and 100.

WebUpload Config Settings

Webupload Config Settings

HTTP Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Socket Config Settings

Base Config Settings

WebUpload Errors

WebUpload Errors

The class may also return one of the following error codes, which are inherited from other classes.

MIME Errors

HTTP Errors

The class may also return one of the following error codes, which are inherited from other classes.

SSLClient Errors

SSL Errors

TCP/IP Errors