FTP Control

Properties   Methods   Events   Config Settings   Errors  

The FTP Control can be used to transfer files to and from FTP servers using the FTP protocol.

Syntax

FTP

Remarks

The FTP Control supports both plaintext and Secure Sockets Layer/Transport Layer Security (SSL/TLS) connections. When connecting over Secure Sockets Layer/Transport Layer Security (SSL/TLS) the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL-related settings are also supported through the Config method.

The FTP Control implements a standard FTP client as specified in RFC 959 and RFC 1579 with the added option of SSL security (RFC 2228) in both the protocol and data channels.

The first step in using the control is specifying the RemoteHost, User and Password. The file to upload to or download from is given by the RemoteFile property. The file to download to or upload from is specified by LocalFile. The current path in the server is set by calling ChangeRemotePath. The Passive property is especially useful if the client is behind a firewall, which inhibits incoming connections to higher ports.

If LocalFile is set to something other than an empty string, then files are received in LocalFile, and otherwise data are received through the Transfer event. StartTransfer and EndTransfer are fired at the beginning and end of transmission.

The PITrail event traces the interaction between the client and the server (the FTP protocol interface connection).

Directory listings are received through the DirList event.

Property List

The following is the full list of the properties of the control with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the control with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the control with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the control with short descriptions. Click on the links for further details.

Account Property (FTP Control)

The property includes the user account needed to log in.

Syntax

ftpcontrol.Account[=string]

Default Value

""

Remarks

This property contains the user account to use when logging in. Some servers may require an Account to Logon or to access specific privileges, such as uploading or deleting files.

Data Type

String

Connected Property (FTP Control)

Whether the control is connected.

Syntax

ftpcontrol.Connected

Default Value

False

Remarks

This property is used to determine whether or not the control is connected to the remote host. Use the Connect and Disconnect methods to manage the connection.

This property is read-only and not available at design time.

Data Type

Boolean

DirListCount Property (FTP Control)

The number of records in the DirList arrays.

Syntax

ftpcontrol.DirListCount

Default Value

0

Remarks

This property controls the size of the following arrays:

• DirListEntry
• DirListFileName
• DirListFileSize
• DirListFileTime
• DirListIsDir

The array indices start at 0 and end at DirListCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

DirListEntry Property (FTP Control)

This property contains the raw entry as received from the server.

Syntax

ftpcontrol.DirListEntry(EntryIndex)

Default Value

""

Remarks

This property contains the raw entry as received from the server. It is the complete unparsed entry in the directory listing.

The EntryIndex parameter specifies the index of the item in the array. The size of the array is controlled by the DirListCount property.

This property is read-only and not available at design time.

Data Type

String

DirListFileName Property (FTP Control)

This property shows the file name in the last directory listing.

Syntax

ftpcontrol.DirListFileName(EntryIndex)

Default Value

""

Remarks

This property shows the file name in the last directory listing. This also may be the directory name if a directory is being listed. You can tell whether it is a file or a directory by the Boolean DirListIsDir property.

The EntryIndex parameter specifies the index of the item in the array. The size of the array is controlled by the DirListCount property.

This property is read-only and not available at design time.

Data Type

String

DirListFileSize Property (FTP Control)

This property shows the file size in the last directory listing.

Syntax

ftpcontrol.DirListFileSize(EntryIndex)

Default Value

0

Remarks

This property shows the file size in the last directory listing.

The EntryIndex parameter specifies the index of the item in the array. The size of the array is controlled by the DirListCount property.

This property is read-only and not available at design time.

Data Type

Long64

DirListFileTime Property (FTP Control)

This property shows the file time in the last directory listing.

Syntax

ftpcontrol.DirListFileTime(EntryIndex)

Default Value

""

Remarks

This property shows the file time in the last directory listing. This contains the date/time stamp in which the file was created.

Note: In Unix systems, the date is given in two types of formats: If the date is in the past 12 months, the exact time is specified and the year is omitted. Otherwise, only the date and the year, but not hours or minutes, are given.

The EntryIndex parameter specifies the index of the item in the array. The size of the array is controlled by the DirListCount property.

This property is read-only and not available at design time.

Data Type

String

DirListIsDir Property (FTP Control)

This property specifies whether entries in the last directory listing are directories.

Syntax

ftpcontrol.DirListIsDir(EntryIndex)

Default Value

False

Remarks

This property specifies whether entries in the last directory listing are directories. This Boolean value denotes whether or not the directory entry listed in DirListFileName is a file or a directory.

The EntryIndex parameter specifies the index of the item in the array. The size of the array is controlled by the DirListCount property.

This property is read-only and not available at design time.

Data Type

Boolean

FirewallAutoDetect Property (FTP Control)

Whether to automatically detect and use firewall system settings, if available.

Syntax

ftpcontrol.FirewallAutoDetect[=boolean]

Default Value

False

Remarks

Whether to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (FTP Control)

The type of firewall to connect through.

Syntax

ftpcontrol.FirewallType[=integer]

Possible Values

fwNone(0), 
fwTunnel(1), 
fwSOCKS4(2), 
fwSOCKS5(3), 
fwSOCKS4A(10)

Default Value

0

Remarks

The type of firewall to connect through. The applicable values are as follows:

Data Type

Integer

FirewallHost Property (FTP Control)

The name or IP address of the firewall (optional).

Syntax

ftpcontrol.FirewallHost[=string]

Default Value

""

Remarks

The name or IP address of the firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the control fails with an error.

Data Type

String

FirewallPassword Property (FTP Control)

A password if authentication is to be used when connecting through the firewall.

Syntax

ftpcontrol.FirewallPassword[=string]

Default Value

""

Remarks

A password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the control fails with an error.

Data Type

String

FirewallPort Property (FTP Control)

The Transmission Control Protocol (TCP) port for the firewall Host .

Syntax

ftpcontrol.FirewallPort[=integer]

Default Value

0

Remarks

The Transmission Control Protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (FTP Control)

A username if authentication is to be used when connecting through a firewall.

Syntax

ftpcontrol.FirewallUser[=string]

Default Value

""

Remarks

A username if authentication is to be used when connecting through a firewall. If FirewallHost is specified, this property and the FirewallPassword property are used to connect and authenticate to the given Firewall. If the authentication fails, the control fails with an error.

Data Type

String

Idle Property (FTP Control)

The current status of the control.

Syntax

ftpcontrol.Idle

Default Value

True

Remarks

This property will be False if the component is currently busy (communicating or waiting for an answer), and True at all other times.

This property is read-only.

Data Type

Boolean

LastReply Property (FTP Control)

This property indicates the last reply received from the server.

Syntax

ftpcontrol.LastReply

Default Value

""

Remarks

This property indicates the last reply received from the server. It can be used for informational purposes. The same information and more also can be retrieved through the PITrail event.

This property is read-only.

Data Type

String

LocalFile Property (FTP Control)

This is the path to a local file for download or upload. If the file exists, it is overwritten.

Syntax

ftpcontrol.LocalFile[=string]

Default Value

""

Remarks

This property is used by the Upload and Download methods to specify the path to a local file to be downloaded or uploaded. See the method descriptions for more information.

Example (Setting LocalFile)

FTPControl.LocalFile = "C:\localfile.txt" FTPControl.RemoteFile = "remotefile.txt" FTPControl.Download() FTPControl.LocalFile = "C:\localfile2.txt" FTPControl.RemoteFile = "folder/remotefile2.txt" FTPControl.Download()

Data Type

String

LocalHost Property (FTP Control)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

ftpcontrol.LocalHost[=string]

Default Value

""

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the control initiate connections (or accept in the case of server controls) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the control is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

Overwrite Property (FTP Control)

This indicates whether or not the control should overwrite files during transfer.

Syntax

ftpcontrol.Overwrite[=boolean]

Default Value

False

Remarks

This property is a value indicating whether or not the control should overwrite downloaded files. If Overwrite is False, an error will be thrown whenever LocalFile exists before a download operation.

Data Type

Boolean

Passive Property (FTP Control)

This controls whether or not to direct the server into a passive mode. It is recommended if behind a firewall.

Syntax

ftpcontrol.Passive[=boolean]

Default Value

True

Remarks

This property controls whether or not to direct the server into a passive mode. Many firewalls will not allow the FTP server to open a connection from outside to the higher ports where the FTP client control expects them to be. If Passive is set to TRUE, the control will use the PASV command instead of the PORT command and thus will direct the server into a passive mode: connections are initiated only by the client.

Data Type

Boolean

Password Property (FTP Control)

This is the password used to log in.

Syntax

ftpcontrol.Password[=string]

Default Value

""

Remarks

This property contains the password used to log in. It must be set before the control connects to the FTP server.

Data Type

String

RemoteFile Property (FTP Control)

This is the name of the remote file for uploading, downloading, and performing other operations.

Syntax

ftpcontrol.RemoteFile[=string]

Default Value

""

Remarks

This property contains the name of the remote file to be uploaded or downloaded and is either an absolute file path or a relative path based on the remote path set by calling ChangeRemotePath.

A number of methods use RemoteFile as an argument.

Example 1. Setting RemoteFile:

FTPControl.LocalFile = "C:\localfile.txt" FTPControl.RemoteFile = "remotefile.txt" FTPControl.Download() FTPControl.LocalFile = "C:\localfile2.txt" FTPControl.RemoteFile = "folder/remotefile2.txt" FTPControl.Download()

Note: As long as file masks are supported by the server, then this property will act as a file mask when performing ListDirectory or ListDirectoryLong. If not supported, then ApplyFileMaskLocally could be set to True to filter the results locally.

Example 2. Using RemoteFile as a file mask: FTPControl.RemoteFile = "*.txt" FTPControl.ListDirectory()

The following special characters are supported for pattern matching:

If these characters need to be used as a literal in a pattern, then they must be escaped by surrounding them with brackets []. Note: "]" and "-" do not need to be escaped. See below for the escape sequences:

For example, to match the value [Something].txt, specify the pattern [[]Something].txt.

Data Type

String

RemoteHost Property (FTP Control)

This is the domain name or IP address of the FTP server.

Syntax

ftpcontrol.RemoteHost[=string]

Default Value

""

Remarks

This property specifies the IP address (IP number in dotted internet format) or the domain name of the FTP server. It is set before a connection is attempted and cannot be changed once a connection is in progress.

If this property is set to a domain name, a DNS request is initiated and upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, an error is returned.

If the control is configured to use a SOCKS firewall, the value assigned to this property may be preceded with an "*". If this is the case, the host name is passed to the firewall unresolved and the firewall performs the DNS resolution.

Data Type

String

RemotePort Property (FTP Control)

This is the port for the FTP service (default is 21).

Syntax

ftpcontrol.RemotePort[=integer]

Default Value

21

Remarks

This property contains the port for the FTP service, which defaults to 21 if not set. A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

For an implicit Secure Sockets Layer (SSL), use port 990 (please see the SSLStartMode property for more information).

This property is not available at design time.

Data Type

Integer

SSLAcceptServerCertEffectiveDate Property (FTP Control)

The date on which this certificate becomes valid.

Syntax

ftpcontrol.SSLAcceptServerCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExpirationDate Property (FTP Control)

The date on which the certificate expires.

Syntax

ftpcontrol.SSLAcceptServerCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExtendedKeyUsage Property (FTP Control)

A comma-delimited list of extended key usage identifiers.

Syntax

ftpcontrol.SSLAcceptServerCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprint Property (FTP Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

ftpcontrol.SSLAcceptServerCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA1 Property (FTP Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

ftpcontrol.SSLAcceptServerCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA256 Property (FTP Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

ftpcontrol.SSLAcceptServerCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLAcceptServerCertIssuer Property (FTP Control)

The issuer of the certificate.

Syntax

ftpcontrol.SSLAcceptServerCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKey Property (FTP Control)

The private key of the certificate (if available).

Syntax

ftpcontrol.SSLAcceptServerCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLAcceptServerCertPrivateKey may be available but not exportable. In this case, SSLAcceptServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKeyAvailable Property (FTP Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

ftpcontrol.SSLAcceptServerCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLAcceptServerCertPrivateKey is available for the selected certificate. If SSLAcceptServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLAcceptServerCertPrivateKeyContainer Property (FTP Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

ftpcontrol.SSLAcceptServerCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLAcceptServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKey Property (FTP Control)

The public key of the certificate.

Syntax

ftpcontrol.SSLAcceptServerCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyAlgorithm Property (FTP Control)

The textual description of the certificate's public key algorithm.

Syntax

ftpcontrol.SSLAcceptServerCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyLength Property (FTP Control)

The length of the certificate's public key (in bits).

Syntax

ftpcontrol.SSLAcceptServerCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertSerialNumber Property (FTP Control)

The serial number of the certificate encoded as a string.

Syntax

ftpcontrol.SSLAcceptServerCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLAcceptServerCertSignatureAlgorithm Property (FTP Control)

The text description of the certificate's signature algorithm.

Syntax

ftpcontrol.SSLAcceptServerCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertStore Property (FTP Control)

The name of the certificate store for the client certificate.

Syntax

ftpcontrol.SSLAcceptServerCertStore[=string]

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLAcceptServerCertStoreType property denotes the type of the certificate store specified by SSLAcceptServerCertStore. If the store is password-protected, specify the password in SSLAcceptServerCertStorePassword.

SSLAcceptServerCertStore is used in conjunction with the SSLAcceptServerCertSubject property to specify client certificates. If SSLAcceptServerCertStore has a value, and SSLAcceptServerCertSubject or SSLAcceptServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLAcceptServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLAcceptServerCertStoreB.

Data Type

Binary String

SSLAcceptServerCertStorePassword Property (FTP Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

ftpcontrol.SSLAcceptServerCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLAcceptServerCertStoreType Property (FTP Control)

The type of certificate store for this certificate.

Syntax

ftpcontrol.SSLAcceptServerCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLAcceptServerCertSubjectAltNames Property (FTP Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

ftpcontrol.SSLAcceptServerCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintMD5 Property (FTP Control)

The MD5 hash of the certificate.

Syntax

ftpcontrol.SSLAcceptServerCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA1 Property (FTP Control)

The SHA-1 hash of the certificate.

Syntax

ftpcontrol.SSLAcceptServerCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA256 Property (FTP Control)

The SHA-256 hash of the certificate.

Syntax

ftpcontrol.SSLAcceptServerCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsage Property (FTP Control)

The text description of UsageFlags .

Syntax

ftpcontrol.SSLAcceptServerCertUsage

Default Value

""

Remarks

The text description of SSLAcceptServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsageFlags Property (FTP Control)

The flags that show intended use for the certificate.

Syntax

ftpcontrol.SSLAcceptServerCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLAcceptServerCertUsageFlags is a combination of the following flags:

Please see the SSLAcceptServerCertUsage property for a text representation of SSLAcceptServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertVersion Property (FTP Control)

The certificate's version number.

Syntax

ftpcontrol.SSLAcceptServerCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLAcceptServerCertSubject Property (FTP Control)

The subject of the certificate used for client authentication.

Syntax

ftpcontrol.SSLAcceptServerCertSubject[=string]

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLAcceptServerCertEncoded Property (FTP Control)

The certificate (PEM/Base64 encoded).

Syntax

ftpcontrol.SSLAcceptServerCertEncoded[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLAcceptServerCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLCertEffectiveDate Property (FTP Control)

The date on which this certificate becomes valid.

Syntax

ftpcontrol.SSLCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLCertExpirationDate Property (FTP Control)

The date on which the certificate expires.

Syntax

ftpcontrol.SSLCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLCertExtendedKeyUsage Property (FTP Control)

A comma-delimited list of extended key usage identifiers.

Syntax

ftpcontrol.SSLCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLCertFingerprint Property (FTP Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

ftpcontrol.SSLCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLCertFingerprintSHA1 Property (FTP Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

ftpcontrol.SSLCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLCertFingerprintSHA256 Property (FTP Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

ftpcontrol.SSLCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLCertIssuer Property (FTP Control)

The issuer of the certificate.

Syntax

ftpcontrol.SSLCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLCertPrivateKey Property (FTP Control)

The private key of the certificate (if available).

Syntax

ftpcontrol.SSLCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLCertPrivateKey may be available but not exportable. In this case, SSLCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLCertPrivateKeyAvailable Property (FTP Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

ftpcontrol.SSLCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLCertPrivateKey is available for the selected certificate. If SSLCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLCertPrivateKeyContainer Property (FTP Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

ftpcontrol.SSLCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLCertPublicKey Property (FTP Control)

The public key of the certificate.

Syntax

ftpcontrol.SSLCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLCertPublicKeyAlgorithm Property (FTP Control)

The textual description of the certificate's public key algorithm.

Syntax

ftpcontrol.SSLCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertPublicKeyLength Property (FTP Control)

The length of the certificate's public key (in bits).

Syntax

ftpcontrol.SSLCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLCertSerialNumber Property (FTP Control)

The serial number of the certificate encoded as a string.

Syntax

ftpcontrol.SSLCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLCertSignatureAlgorithm Property (FTP Control)

The text description of the certificate's signature algorithm.

Syntax

ftpcontrol.SSLCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertStore Property (FTP Control)

The name of the certificate store for the client certificate.

Syntax

ftpcontrol.SSLCertStore[=string]

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password-protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertStoreB.

Data Type

Binary String

SSLCertStorePassword Property (FTP Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

ftpcontrol.SSLCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (FTP Control)

The type of certificate store for this certificate.

Syntax

ftpcontrol.SSLCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubjectAltNames Property (FTP Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

ftpcontrol.SSLCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLCertThumbprintMD5 Property (FTP Control)

The MD5 hash of the certificate.

Syntax

ftpcontrol.SSLCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA1 Property (FTP Control)

The SHA-1 hash of the certificate.

Syntax

ftpcontrol.SSLCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA256 Property (FTP Control)

The SHA-256 hash of the certificate.

Syntax

ftpcontrol.SSLCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertUsage Property (FTP Control)

The text description of UsageFlags .

Syntax

ftpcontrol.SSLCertUsage

Default Value

""

Remarks

The text description of SSLCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLCertUsageFlags Property (FTP Control)

The flags that show intended use for the certificate.

Syntax

ftpcontrol.SSLCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLCertUsageFlags is a combination of the following flags:

Please see the SSLCertUsage property for a text representation of SSLCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLCertVersion Property (FTP Control)

The certificate's version number.

Syntax

ftpcontrol.SSLCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLCertSubject Property (FTP Control)

The subject of the certificate used for client authentication.

Syntax

ftpcontrol.SSLCertSubject[=string]

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLCertEncoded Property (FTP Control)

The certificate (PEM/Base64 encoded).

Syntax

ftpcontrol.SSLCertEncoded[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLProvider Property (FTP Control)

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax

ftpcontrol.SSLProvider[=integer]

Possible Values

sslpAutomatic(0), 
sslpPlatform(1), 
sslpInternal(2)

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the control will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:

In most cases using the default value (Automatic) is recommended. The control will select a provider depending on the current platform.

When Automatic is selected, the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used.

Data Type

Integer

SSLServerCertEffectiveDate Property (FTP Control)

The date on which this certificate becomes valid.

Syntax

ftpcontrol.SSLServerCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExpirationDate Property (FTP Control)

The date on which the certificate expires.

Syntax

ftpcontrol.SSLServerCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExtendedKeyUsage Property (FTP Control)

A comma-delimited list of extended key usage identifiers.

Syntax

ftpcontrol.SSLServerCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLServerCertFingerprint Property (FTP Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

ftpcontrol.SSLServerCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA1 Property (FTP Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

ftpcontrol.SSLServerCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA256 Property (FTP Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

ftpcontrol.SSLServerCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLServerCertIssuer Property (FTP Control)

The issuer of the certificate.

Syntax

ftpcontrol.SSLServerCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLServerCertPrivateKey Property (FTP Control)

The private key of the certificate (if available).

Syntax

ftpcontrol.SSLServerCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLServerCertPrivateKey may be available but not exportable. In this case, SSLServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLServerCertPrivateKeyAvailable Property (FTP Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

ftpcontrol.SSLServerCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLServerCertPrivateKey is available for the selected certificate. If SSLServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLServerCertPrivateKeyContainer Property (FTP Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

ftpcontrol.SSLServerCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLServerCertPublicKey Property (FTP Control)

The public key of the certificate.

Syntax

ftpcontrol.SSLServerCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyAlgorithm Property (FTP Control)

The textual description of the certificate's public key algorithm.

Syntax

ftpcontrol.SSLServerCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyLength Property (FTP Control)

The length of the certificate's public key (in bits).

Syntax

ftpcontrol.SSLServerCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLServerCertSerialNumber Property (FTP Control)

The serial number of the certificate encoded as a string.

Syntax

ftpcontrol.SSLServerCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLServerCertSignatureAlgorithm Property (FTP Control)

The text description of the certificate's signature algorithm.

Syntax

ftpcontrol.SSLServerCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertStore Property (FTP Control)

The name of the certificate store for the client certificate.

Syntax

ftpcontrol.SSLServerCertStore

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLServerCertStoreType property denotes the type of the certificate store specified by SSLServerCertStore. If the store is password-protected, specify the password in SSLServerCertStorePassword.

SSLServerCertStore is used in conjunction with the SSLServerCertSubject property to specify client certificates. If SSLServerCertStore has a value, and SSLServerCertSubject or SSLServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLServerCertStoreB.

This property is read-only.

Data Type

Binary String

SSLServerCertStorePassword Property (FTP Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

ftpcontrol.SSLServerCertStorePassword

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

This property is read-only.

Data Type

String

SSLServerCertStoreType Property (FTP Control)

The type of certificate store for this certificate.

Syntax

ftpcontrol.SSLServerCertStoreType

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

This property is read-only.

Data Type

Integer

SSLServerCertSubjectAltNames Property (FTP Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

ftpcontrol.SSLServerCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLServerCertThumbprintMD5 Property (FTP Control)

The MD5 hash of the certificate.

Syntax

ftpcontrol.SSLServerCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA1 Property (FTP Control)

The SHA-1 hash of the certificate.

Syntax

ftpcontrol.SSLServerCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA256 Property (FTP Control)

The SHA-256 hash of the certificate.

Syntax

ftpcontrol.SSLServerCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertUsage Property (FTP Control)

The text description of UsageFlags .

Syntax

ftpcontrol.SSLServerCertUsage

Default Value

""

Remarks

The text description of SSLServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLServerCertUsageFlags Property (FTP Control)

The flags that show intended use for the certificate.

Syntax

ftpcontrol.SSLServerCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLServerCertUsageFlags is a combination of the following flags:

Please see the SSLServerCertUsage property for a text representation of SSLServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLServerCertVersion Property (FTP Control)

The certificate's version number.

Syntax

ftpcontrol.SSLServerCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLServerCertSubject Property (FTP Control)

The subject of the certificate used for client authentication.

Syntax

ftpcontrol.SSLServerCertSubject

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

This property is read-only.

Data Type

String

SSLServerCertEncoded Property (FTP Control)

The certificate (PEM/Base64 encoded).

Syntax

ftpcontrol.SSLServerCertEncoded

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLServerCertEncodedB.

This property is read-only and not available at design time.

Data Type

Binary String

SSLStartMode Property (FTP Control)

This property determines how the control starts the Secure Sockets Layer (SSL) negotiation.

Syntax

ftpcontrol.SSLStartMode[=integer]

Possible Values

sslAutomatic(0), 
sslImplicit(1), 
sslExplicit(2)

Default Value

0

Remarks

The SSLStartMode property may have one of the following values:

Data Type

Integer

StartByte Property (FTP Control)

This is the byte index in RemoteFile and LocalFile from which to start a transmission.

Syntax

ftpcontrol.StartByte[=string]

Default Value

"0"

Remarks

This property contains a zero-based index in both RemoteFile and LocalFile that determines the point from which the transmission of data begins. This is useful for resuming interrupted downloads and uploads of files from FTP servers.

Once set, the StartByte index is used for all future downloads and uploads. The property must be reset to "0" for normal downloads and uploads.

The type of the property is a string instead of numeric value to allow for certain implementations that expect an alphanumeric marker for the start index.

In the Transfer event, the TransferredBytes parameter will include the bytes skipped (i.e., it will show StartByte more bytes than actually transferred).

Note: Some FTP servers may not support the FTP REST command. If that is the case with the server you are accessing, you will not be able to use the StartByte property.

This property is not available at design time.

Data Type

String

Timeout Property (FTP Control)

The timeout for the control.

Syntax

ftpcontrol.Timeout[=integer]

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the control will wait for the operation to complete before returning control.

The control will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the control fails with an error.

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

TransferMode Property (FTP Control)

This property indicates the transfer mode (ASCII or binary). If the value is 0 (default), the initial server mode will be used.

Syntax

ftpcontrol.TransferMode

Possible Values

tmDefault(0), 
tmASCII(1), 
tmBinary(2)

Default Value

0

Remarks

This property indicates the current transfer mode, which is either ASCII or binary. To change the transfer mode call the ChangeTransferMode method. Possible values for this property are:

This property is read-only.

Data Type

Integer

User Property (FTP Control)

This property contains the user identifier to use to log in.

Syntax

ftpcontrol.User[=string]

Default Value

""

Remarks

This property contains the user identifier to be used when logging in. It must be set before the control connects to the FTP server.

Data Type

String

Abort Method (FTP Control)

The method aborts the current upload or download.

Syntax

ftpcontrol.Abort 

Remarks

This method sends an ABOR command to the FTP server. It is used to interrupt file uploads and downloads.

Append Method (FTP Control)

This method appends data from LocalFile to a RemoteFile on an FTP server.

Syntax

ftpcontrol.Append 

Remarks

This method causes the server-data transfer process (DTP) to accept the data transferred through the data connection and to store the data in a file on the server site. If the file specified in the pathname exists on the server site, then the data shall be appended to that file; otherwise, the file specified in the pathname shall be created on the server site. This method is similar to the Upload method, but the local file specified by LocalFile is appended to RemoteFile on the server as opposed to replacing it, as with the Upload method. RemoteFile is either an absolute path on the server, or a path relative to the current path set by ChangeRemotePath. The server will create a file with that name if it doesn't already exist (similar to upload). If no FTP session is in place, one is automatically created by first calling the Logon method.

ChangeRemotePath Method (FTP Control)

This method changes the current path on the FTP server.

Syntax

ftpcontrol.ChangeRemotePath RemotePath

Remarks

This method changes the current path on the FTP server to the specified RemotePath. When called, the control will issue a command to the server to change the directory. The RemotePath parameter may hold an absolute or relative path.

Absolute Paths

If the path begins with a /, it is considered an absolute path and must specify the entire path from the root of the server. For instance:

component.ChangeRemotePath("/home/testuser/myfolder");

Relative Paths

If the path does not begin with a /, it is considered a relative path and is resolved in relation to the current directory. For instance, a value of myfolder will indicate a subfolder of the current directory. The special value .. refers to the parent directory of the current path. For instance:

//Change to the 'myfolder' sub-directory component.ChangeRemotePath("myfolder"); //Navigate up two levels and then into the 'another/folder' path. component.ChangeRemotePath("../../another/folder");

ChangeTransferMode Method (FTP Control)

This method changes the transfer mode for the current connection.

Syntax

ftpcontrol.ChangeTransferMode TransferMode

Remarks

This method optionally changes the transfer mode used for the connection. The TransferMode parameter indicates the new transfer mode to be used.

In many cases, it is not necessary to explicitly change the transfer mode; however, the binary transfer mode is useful to ensure that files are preserved byte-for-byte during the transfer. For instance, when uploading or downloading images or archives, the binary transfer mode will ensure that no line-ending transformations are performed by the server before data are transmitted.

Valid values for the TransferMode parameter are as follows:

CheckFileExists Method (FTP Control)

This method returns True if the file specified by RemoteFile exists on the server.

Syntax

ftpcontrol.CheckFileExists 

Remarks

This method sends a command to the server to determine if the file specified by RemoteFile exists. If the file exists, this method returns , otherwise it returns . RemoteFile must be specified before calling this method. For instance: component.ChangeRemotePath("/home/testuser/myfolder"); component.RemoteFile = "test.txt"; if(component.CheckFileExists()) { //Do something }

Config Method (FTP Control)

Sets or retrieves a configuration setting.

Syntax

ftpcontrol.Config ConfigurationString

Remarks

Config is a generic method available in every control. It is used to set and retrieve configuration settings for the control.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the control, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (FTP Control)

This method connects to the FTP server without logging in.

Syntax

ftpcontrol.Connect 

Remarks

This method establishes a connection with the RemoteHost but does not log in. In most cases, it is recommended to use the Logon method, which will both establish a connection and log in to the server.

This method may be useful in cases in which it is desirable to separate the connection and logon operations, for instance, confirming that a host is available by first creating the connection.

DeleteFile Method (FTP Control)

This method removes a file specified by FileName from an FTP server.

Syntax

ftpcontrol.DeleteFile FileName

Remarks

This method is used to remove a file specified by FileName from an FTP server. The remote file or directory specified by FileName is deleted. FileName is either an absolute path on the server, or a path relative to remote path set by ChangeRemotePath. If no FTP session is in place, one is automatically created by first calling the Logon method.

Disconnect Method (FTP Control)

This method disconnects from the server without first logging off.

Syntax

ftpcontrol.Disconnect 

Remarks

This method immediately disconnects from the server without first logging off.

In most cases, the Logoff method should be used to log off and disconnect from the server. Call the Disconnect method in cases in which it is desirable to immediately disconnect without first logging off.

DoEvents Method (FTP Control)

This method processes events from the internal message queue.

Syntax

ftpcontrol.DoEvents 

Remarks

When DoEvents is called, the control processes any available events. If no events are available, it waits for a preset period of time, and then returns.

Download Method (FTP Control)

This method downloads a RemoteFile from an FTP server.

Syntax

ftpcontrol.Download 

Remarks

This method is used to download the remote file specified by RemoteFile to the local file specified by LocalFile, or it is retrieved through the Transfer event if the LocalFile property is "" (empty string). RemoteFile is either an absolute path on the server or a path relative to a remote path set by calling ChangeRemotePath. If no FTP session is in place, one is automatically created by first calling the Logon method.

Example (Download a File)

FTPControl.LocalFile = "C:\localfile.txt" FTPControl.RemoteFile = "remotefile.txt" FTPControl.Download() FTPControl.LocalFile = "C:\localfile2.txt" FTPControl.RemoteFile = "folder/remotefile2.txt" FTPControl.Download()

Interrupt Method (FTP Control)

This method interrupts the current method.

Syntax

ftpcontrol.Interrupt 

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ListDirectory Method (FTP Control)

List the current directory specified by ChangeRemotePath on an FTP server.

Syntax

ftpcontrol.ListDirectory 

Remarks

This method is used to list the directory (or file mask) specified in RemoteFile. RemoteFile is either an absolute path on the server, or a path relative to the remote path set by ChangeRemotePath. The file listing is received through the DirList event.

Similar to ListDirectoryLong, except that only file names are returned.

Note: Because RemoteFile acts as a file mask, to retrieve a complete directory listing RemoteFile should be set to an empty string or a mask like "*". If no FTP session is in place, one is automatically created by first calling the Logon method.

ListDirectoryLong Method (FTP Control)

This method lists extended directory information for the remote path specified by calling ChangeRemotePath .

Syntax

ftpcontrol.ListDirectoryLong 

Remarks

This method is used to request a directory (or file mask) listing specified in RemoteFile. RemoteFile is either an absolute path on the server, or a path relative to the remote path set by calling ChangeRemotePath. The file listing is received through the DirList event. Extended file information is returned.

Note: Because RemoteFile acts as a file mask, to retrieve a complete directory listing RemoteFile should be set to empty string or a mask like "*". If no FTP session is in place, one is automatically created by first calling the Logon method.

Logoff Method (FTP Control)

This method is used to log off from the FTP server by posting a QUIT command.

Syntax

ftpcontrol.Logoff 

Remarks

This method is used to log off from the FTP server by posting a QUIT command. If that fails, the connection is terminated by the local host.

Logon Method (FTP Control)

This method is used to log on to the FTP RemoteHost using the current User and Password .

Syntax

ftpcontrol.Logon 

Remarks

This method is used to log on to the FTP server using the current User and Password. If TransferMode is not 0 (Default), then the FTP transfer mode is set to the appropriate value.

Example (Logging On)

FTPControl.RemoteHost = "ftpserver" FTPControl.User = "username" FTPControl.Password = "password" FTPControl.Logon()

MakeDirectory Method (FTP Control)

This method is used to create a directory on the FTP server.

Syntax

ftpcontrol.MakeDirectory NewDir

Remarks

This method is used to create a directory with a path specified by NewDir on the FTP server. NewDir is either an absolute path on the server, or a path relative to the remote path that is set by calling ChangeRemotePath. If no FTP session is in place, one is automatically created by first calling the Logon method.

Note: When MakeDirectory is called, RemoteFile is changed to NewDir.

QueryFileTime Method (FTP Control)

This returns the modified time of the file specified by RemoteFile .

Syntax

ftpcontrol.QueryFileTime 

Remarks

This method sends the MDTM command to the server to obtain the modified time of the file specified by RemoteFile. The time returned by this method will be converted to the local timezone. RemoteFile must be specified before calling this method. For instance: component.ChangeRemotePath("/home/testuser/myfolder"); component.RemoteFile = "test.txt"; string myModifiedTime = component.QueryFileTime();

The FileTimeFormat configuration setting controls the format of the returned value.

QueryRemotePath Method (FTP Control)

This queries the server for the current path.

Syntax

ftpcontrol.QueryRemotePath 

Remarks

This method queries the server for the current path. When called, the control will issue a command to the server to retrieve the current path value. The return value of this method is the path returned by the server. For instance:

string remotePath = component.QueryRemotePath();

RemoveDirectory Method (FTP Control)

This removes a directory specified by DirName from an FTP server.

Syntax

ftpcontrol.RemoveDirectory DirName

Remarks

This method is used to remove a directory with path specified by DirName from the FTP server. DirName is either an absolute path on the server, or a path relative to the remote path set by calling ChangeRemotePath. If no FTP session is in place, one is automatically created by first calling the Logon method.

RenameFile Method (FTP Control)

This changes the name of RemoteFile to NewName .

Syntax

ftpcontrol.RenameFile NewName

Remarks

This method is used to change the name of a remote file, specified by RemoteFile to NewName. RemoteFile and NewName are either absolute paths on the server, or a path relative to a remote path set by calling ChangeRemotePath. If no FTP session is in place, one is automatically created by first calling the Logon method.

Reset Method (FTP Control)

This method will reset the control.

Syntax

ftpcontrol.Reset 

Remarks

This method will reset the control's properties to their default values.

SendCommand Method (FTP Control)

This method sends the exact command directly to the server.

Syntax

ftpcontrol.SendCommand Command

Remarks

This method sends the command specified by Command to the server exactly as it is provided. Use this method to send additional or custom commands directly to the server.

After calling this method, check the LastReply property or monitor the PITrail event to obtain the server's response.

StoreUnique Method (FTP Control)

This method uploads a file with a unique name to an FTP server.

Syntax

ftpcontrol.StoreUnique 

Remarks

This method is used to upload a file with a unique name to an FTP server. This is similar to the Upload method, but the server determines a unique name for the LocalFile to be saved on the current directory set by calling ChangeRemotePath. The server includes the new name of the file in its response. The user should check the PITrail event, or LastReply property to retrieve this generated filename.

Upload Method (FTP Control)

This method uploads a file specified by LocalFile to an FTP server.

Syntax

ftpcontrol.Upload 

Remarks

This method uploads a local file specified by LocalFile to the remote file specified by RemoteFile. RemoteFile is either an absolute path on the server, or a path relative to the remote path set by calling ChangeRemotePath. If no FTP session is in place, one is automatically created by first calling the Logon method.

If you want to append to a server file, please refer to the Append method.

Example 1: Upload a File

FTPControl.LocalFile = "C:\localfile.txt" FTPControl.RemoteFile = "remotefile.txt" FTPControl.Upload() FTPControl.LocalFile = "C:\localfile2.txt" FTPControl.RemoteFile = "folder/remotefile2.txt" FTPControl.Upload()

ConnectionStatus Event (FTP Control)

Fired to indicate changes in the connection state.

Syntax

Sub ftpcontrol_ConnectionStatus(ConnectionEvent As String, StatusCode As Integer, Description As String)

Remarks

This event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

DirList Event (FTP Control)

This event is fired when a directory entry is received.

Syntax

Sub ftpcontrol_DirList(DirEntry As String, FileName As String, IsDir As Boolean, FileSize As Long64, FileTime As String)

Remarks

The DirList events are fired when a directory listing is received as a response to a ListDirectory or ListDirectoryLong call.

The StartTransfer and EndTransfer events mark the beginning and end of the event stream.

The DirEntry parameter contains the filename when ListDirectory is called and includes extended file information when ListDirectoryLong is called.

The control tries to fill out the FileName, IsDir, FileSize, and FileTime parameters when calling the ListDirectoryLong method. Except for FileName, these parameters are empty when a short "List Directory" is performed.

In Unix systems, the date is given in two types of formats: If the date is in the past 12 months the exact time is specified and the year is omitted. Otherwise, only the date and the year, but not hours or minutes, are given.

EndTransfer Event (FTP Control)

This event is fired when a file finishes downloading or uploading.

Syntax

Sub ftpcontrol_EndTransfer(Direction As Integer)

Remarks

The EndTransfer event fires when a Data Interface connection is closed. This occurs when the file finishes transferring or a directory listing is finished.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Error Event (FTP Control)

Fired when information is available about errors during data delivery.

Syntax

Sub ftpcontrol_Error(ErrorCode As Integer, Description As String)

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the control fails with an error.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

PITrail Event (FTP Control)

This event traces the commands sent to the server, and the respective replies.

Syntax

Sub ftpcontrol_PITrail(Direction As Integer, Message As String)

Remarks

The PITrail event is useful for debugging purposes. It shows all of the interactions between the client and the server, line by line.

The Message parameter contains the full text of the message. The Direction parameter shows the originator of the message:

SSLServerAuthentication Event (FTP Control)

Fired after the server presents its certificate to the client.

Syntax

Sub ftpcontrol_SSLServerAuthentication(CertEncoded As String, CertSubject As String, CertIssuer As String, Status As String, Accept As Boolean)

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (FTP Control)

Fired when secure connection progress messages are available.

Syntax

Sub ftpcontrol_SSLStatus(Message As String)

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

StartTransfer Event (FTP Control)

This event fires when a file starts downloading or uploading.

Syntax

Sub ftpcontrol_StartTransfer(Direction As Integer)

Remarks

The StartTransfer event fires when a Data Interface connection is created. This is when the file starts transferring or a directory listing is started.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Transfer Event (FTP Control)

This event is fired during the file download or upload.

Syntax

Sub ftpcontrol_Transfer(Direction As Integer, BytesTransferred As Long64, PercentDone As Integer, Text As String)

Remarks

One or more Transfer events are fired during file transfer. The BytesTransferred parameter shows the number of bytes transferred since the beginning of the transfer.

Text contains the portion of the file data being delivered.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Config Settings (FTP Control)

FTP Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Socket Config Settings

Base Config Settings

Trappable Errors (FTP Control)

FTP Errors

The control may also return one of the following error codes, which are inherited from other controls.

SSLClient Errors

SSL Errors

TCP/IP Errors